Fix heading levels

- page title (chapter): 1
- sections: 2
This commit is contained in:
Martin Moene 2017-08-28 22:32:06 +02:00 committed by Martin Hořeňovský
parent 66124d9e38
commit c5553019cc
2 changed files with 16 additions and 16 deletions

View File

@ -3,13 +3,13 @@
Build Systems may refer to low-level tools, like CMake, or larger systems that run on servers, like Jenkins or TeamCity. This page will talk about both. Build Systems may refer to low-level tools, like CMake, or larger systems that run on servers, like Jenkins or TeamCity. This page will talk about both.
# Continuous Integration systems ## Continuous Integration systems
Probably the most important aspect to using Catch with a build server is the use of different reporters. Catch comes bundled with three reporters that should cover the majority of build servers out there - although adding more for better integration with some is always a possibility (currently we also offer TeamCity, TAP and Automake reporters). Probably the most important aspect to using Catch with a build server is the use of different reporters. Catch comes bundled with three reporters that should cover the majority of build servers out there - although adding more for better integration with some is always a possibility (currently we also offer TeamCity, TAP and Automake reporters).
Two of these reporters are built in (XML and JUnit) and the third (TeamCity) is included as a separate header. It's possible that the other two may be split out in the future too - as that would make the core of Catch smaller for those that don't need them. Two of these reporters are built in (XML and JUnit) and the third (TeamCity) is included as a separate header. It's possible that the other two may be split out in the future too - as that would make the core of Catch smaller for those that don't need them.
## XML Reporter ### XML Reporter
```-r xml``` ```-r xml```
The XML Reporter writes in an XML format that is specific to Catch. The XML Reporter writes in an XML format that is specific to Catch.
@ -18,7 +18,7 @@ The advantage of this format is that it corresponds well to the way Catch works
The disadvantage is that, being specific to Catch, no existing build servers understand the format natively. It can be used as input to an XSLT transformation that could covert it to, say, HTML - although this loses the streaming advantage, of course. The disadvantage is that, being specific to Catch, no existing build servers understand the format natively. It can be used as input to an XSLT transformation that could covert it to, say, HTML - although this loses the streaming advantage, of course.
## JUnit Reporter ### JUnit Reporter
```-r junit``` ```-r junit```
The JUnit Reporter writes in an XML format that mimics the JUnit ANT schema. The JUnit Reporter writes in an XML format that mimics the JUnit ANT schema.
@ -53,9 +53,9 @@ The Automake Reporter writes out the [meta tags](https://www.gnu.org/software/au
Because of the incremental nature of Catch's test suites and ability to run specific tests, our implementation of TAP reporter writes out the number of tests in a suite last. Because of the incremental nature of Catch's test suites and ability to run specific tests, our implementation of TAP reporter writes out the number of tests in a suite last.
# Low-level tools ## Low-level tools
## CMake ### CMake
In general we recommend "vendoring" Catch's single-include releases inside your own repository. If you do this, the following example shows a minimal CMake project: In general we recommend "vendoring" Catch's single-include releases inside your own repository. If you do this, the following example shows a minimal CMake project:
```CMake ```CMake

View File

@ -5,7 +5,7 @@ Catch is designed to "just work" as much as possible. For most people the only c
Nonetheless there are still some occasions where finer control is needed. For these occasions Catch exposes a set of macros for configuring how it is built. Nonetheless there are still some occasions where finer control is needed. For these occasions Catch exposes a set of macros for configuring how it is built.
# main()/ implementation ## main()/ implementation
CATCH_CONFIG_MAIN // Designates this as implementation file and defines main() CATCH_CONFIG_MAIN // Designates this as implementation file and defines main()
CATCH_CONFIG_RUNNER // Designates this as implementation file CATCH_CONFIG_RUNNER // Designates this as implementation file
@ -20,14 +20,14 @@ Brings in various parts of Catch that are required for user defined Reporters an
Implied by both `CATCH_CONFIG_MAIN` and `CATCH_CONFIG_RUNNER`. Implied by both `CATCH_CONFIG_MAIN` and `CATCH_CONFIG_RUNNER`.
# Prefixing Catch macros ## Prefixing Catch macros
CATCH_CONFIG_PREFIX_ALL CATCH_CONFIG_PREFIX_ALL
To keep test code clean and uncluttered Catch uses short macro names (e.g. ```TEST_CASE``` and ```REQUIRE```). Occasionally these may conflict with identifiers from platform headers or the system under test. In this case the above identifier can be defined. This will cause all the Catch user macros to be prefixed with ```CATCH_``` (e.g. ```CATCH_TEST_CASE``` and ```CATCH_REQUIRE```). To keep test code clean and uncluttered Catch uses short macro names (e.g. ```TEST_CASE``` and ```REQUIRE```). Occasionally these may conflict with identifiers from platform headers or the system under test. In this case the above identifier can be defined. This will cause all the Catch user macros to be prefixed with ```CATCH_``` (e.g. ```CATCH_TEST_CASE``` and ```CATCH_REQUIRE```).
# Terminal colour ## Terminal colour
CATCH_CONFIG_COLOUR_NONE // completely disables all text colouring CATCH_CONFIG_COLOUR_NONE // completely disables all text colouring
CATCH_CONFIG_COLOUR_WINDOWS // forces the Win32 console API to be used CATCH_CONFIG_COLOUR_WINDOWS // forces the Win32 console API to be used
@ -43,14 +43,14 @@ Note that when ANSI colour codes are used "unistd.h" must be includable - along
Typically you should place the ```#define``` before #including "catch.hpp" in your main source file - but if you prefer you can define it for your whole project by whatever your IDE or build system provides for you to do so. Typically you should place the ```#define``` before #including "catch.hpp" in your main source file - but if you prefer you can define it for your whole project by whatever your IDE or build system provides for you to do so.
# Console width ## Console width
CATCH_CONFIG_CONSOLE_WIDTH = x // where x is a number CATCH_CONFIG_CONSOLE_WIDTH = x // where x is a number
Catch formats output intended for the console to fit within a fixed number of characters. This is especially important as indentation is used extensively and uncontrolled line wraps break this. Catch formats output intended for the console to fit within a fixed number of characters. This is especially important as indentation is used extensively and uncontrolled line wraps break this.
By default a console width of 80 is assumed but this can be controlled by defining the above identifier to be a different value. By default a console width of 80 is assumed but this can be controlled by defining the above identifier to be a different value.
# stdout ## stdout
CATCH_CONFIG_NOSTDOUT CATCH_CONFIG_NOSTDOUT
@ -64,7 +64,7 @@ This can be useful on certain platforms that do not provide the standard iostrea
# Other toggles ## Other toggles
CATCH_CONFIG_COUNTER // Use __COUNTER__ to generate unique names for test cases CATCH_CONFIG_COUNTER // Use __COUNTER__ to generate unique names for test cases
CATCH_CONFIG_WINDOWS_SEH // Enable SEH handling on Windows CATCH_CONFIG_WINDOWS_SEH // Enable SEH handling on Windows
@ -83,29 +83,29 @@ Currently Catch enables `CATCH_CONFIG_WINDOWS_SEH` only when compiled with MSVC,
These toggles can be disabled by using `_NO_` form of the toggle, e.g. `CATCH_CONFIG_NO_WINDOWS_SEH`. These toggles can be disabled by using `_NO_` form of the toggle, e.g. `CATCH_CONFIG_NO_WINDOWS_SEH`.
## `CATCH_CONFIG_FAST_COMPILE` ### `CATCH_CONFIG_FAST_COMPILE`
Defining this flag speeds up compilation of test files by ~20%, by making 2 changes: Defining this flag speeds up compilation of test files by ~20%, by making 2 changes:
* The `-b` (`--break`) flag no longer makes Catch break into debugger in the same stack frame as the failed test, but rather in a stack frame *below*. * The `-b` (`--break`) flag no longer makes Catch break into debugger in the same stack frame as the failed test, but rather in a stack frame *below*.
* Non-exception family of macros ({`REQUIRE`,`CHECK`}{`_`,`_FALSE`, `_FALSE`}, no longer use local try-cache block. This disables exception translation, but should not lead to false negatives. * Non-exception family of macros ({`REQUIRE`,`CHECK`}{`_`,`_FALSE`, `_FALSE`}, no longer use local try-cache block. This disables exception translation, but should not lead to false negatives.
`CATCH_CONFIG_FAST_COMPILE` has to be either defined, or not defined, in all translation units that are linked into single test binary, or the behaviour of setting `-b` flag and throwing unexpected exceptions will be unpredictable. `CATCH_CONFIG_FAST_COMPILE` has to be either defined, or not defined, in all translation units that are linked into single test binary, or the behaviour of setting `-b` flag and throwing unexpected exceptions will be unpredictable.
## `CATCH_CONFIG_DISABLE_MATCHERS` ### `CATCH_CONFIG_DISABLE_MATCHERS`
When `CATCH_CONFIG_DISABLE_MATCHERS` is defined, all mentions of Catch's Matchers are ifdef-ed away from the translation unit. Doing so will speed up compilation of that TU. When `CATCH_CONFIG_DISABLE_MATCHERS` is defined, all mentions of Catch's Matchers are ifdef-ed away from the translation unit. Doing so will speed up compilation of that TU.
_Note: If you define `CATCH_CONFIG_DISABLE_MATCHERS` in the same file as Catch's main is implemented, your test executable will fail to link if you use Matchers anywhere._ _Note: If you define `CATCH_CONFIG_DISABLE_MATCHERS` in the same file as Catch's main is implemented, your test executable will fail to link if you use Matchers anywhere._
## `CATCH_CONFIG_DISABLE_STRINGIFICATION` ### `CATCH_CONFIG_DISABLE_STRINGIFICATION`
This toggle enables a workaround for VS 2017 bug. For details see [known limitations](limitations.md#Visual Studio 2017 -- raw string literal in assert fails to compile) This toggle enables a workaround for VS 2017 bug. For details see [known limitations](limitations.md#Visual Studio 2017 -- raw string literal in assert fails to compile)
## `CATCH_CONFIG_DISABLE` ### `CATCH_CONFIG_DISABLE`
This toggle removes most of Catch from given file. This means that `TEST_CASE`s are not registered and assertions are turned into no-ops. Useful for keeping tests within implementation files (ie for functions with internal linkage), instead of in external files. This toggle removes most of Catch from given file. This means that `TEST_CASE`s are not registered and assertions are turned into no-ops. Useful for keeping tests within implementation files (ie for functions with internal linkage), instead of in external files.
This feature is considered experimental and might change at any point. This feature is considered experimental and might change at any point.
_Inspired by Doctest's `DOCTEST_CONFIG_DISABLE`_ _Inspired by Doctest's `DOCTEST_CONFIG_DISABLE`_
# Windows header clutter ## Windows header clutter
On Windows Catch includes `windows.h`. To minimize global namespace clutter in the implementation file, it defines `NOMINMAX` and `WIN32_LEAN_AND_MEAN` before including it. You can control this behaviour via two macros: On Windows Catch includes `windows.h`. To minimize global namespace clutter in the implementation file, it defines `NOMINMAX` and `WIN32_LEAN_AND_MEAN` before including it. You can control this behaviour via two macros: