Update Doxyfile for newer doxygen

Doxyfile

@@ -1,4 +1,4 @@
-# Doxyfile 1.8.16
+# Doxyfile 1.9.1
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ DOXYFILE_ENCODING      = UTF-8
 # title of most generated pages and in a few other places.
 # The default value is: My Project.
 
-PROJECT_NAME           = "Catch2"
+PROJECT_NAME           = Catch2
 
 # The PROJECT_NUMBER tag can be used to enter a project or revision number. This
 # could be handy for archiving the generated documentation or if some version
@@ -51,6 +51,7 @@ PROJECT_BRIEF          = "Popular C++ unit testing framework"
 # pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
 # the logo to the output directory.
 
+PROJECT_LOGO           =
 
 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
 # into which the generated documentation will be written. If a relative path is
@@ -216,6 +217,14 @@ QT_AUTOBRIEF           = YES
 
 MULTILINE_CPP_IS_BRIEF = NO
 
+# By default Python docstrings are displayed as preformatted text and doxygen's
+# special commands cannot be used. By setting PYTHON_DOCSTRING to NO the
+# doxygen's special commands can be used and the contents of the docstring
+# documentation blocks is shown as doxygen documentation.
+# The default value is: YES.
+
+PYTHON_DOCSTRING       = YES
+
 # If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
 # documentation from any documented member that it re-implements.
 # The default value is: YES.
@@ -251,13 +260,7 @@ TAB_SIZE               = 4
 # a double escape (\\{ and \\})
 
 ALIASES                = "complexity=@par Complexity:" \
-                         "noexcept=**Noexcept**"
+                         noexcept=**Noexcept**
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
 
 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
 # only. Doxygen will then generate output that is more tailored for C. For
@@ -299,19 +302,22 @@ OPTIMIZE_OUTPUT_SLICE  = NO
 # parses. With this tag you can assign which parser to use for a given
 # extension. Doxygen has a built-in mapping, but you can override or extend it
 # using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# language is one of the parsers supported by doxygen: IDL, Java, JavaScript,
-# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice,
+# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, VHDL,
 # Fortran (fixed format Fortran: FortranFixed, free formatted Fortran:
 # FortranFree, unknown formatted Fortran: Fortran. In the later case the parser
 # tries to guess whether the code is fixed or free formatted code, this is the
-# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat
+# default for Fortran type files). For instance to make doxygen treat .inc files
-# .inc files as Fortran files (default is PHP), and .f files as C (default is
+# as Fortran files (default is PHP), and .f files as C (default is Fortran),
-# Fortran), use: inc=Fortran f=C.
+# use: inc=Fortran f=C.
 #
 # Note: For files without extension you can use no_extension as a placeholder.
 #
 # Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
+# the files are not read by doxygen. When specifying no_extension you should add
+# * to the FILE_PATTERNS.
+#
+# Note see also the list of default file extension mappings.
 
 EXTENSION_MAPPING      =
 
@@ -445,6 +451,19 @@ TYPEDEF_HIDES_STRUCT   = NO
 
 LOOKUP_CACHE_SIZE      = 0
 
+# The NUM_PROC_THREADS specifies the number threads doxygen is allowed to use
+# during processing. When set to 0 doxygen will based this on the number of
+# cores available in the system. You can set it explicitly to a value larger
+# than 0 to get more control over the balance between CPU load and processing
+# speed. At this moment only the input processing can be done using multiple
+# threads. Since this is still an experimental feature the default is set to 1,
+# which efficively disables parallel processing. Please report any issues you
+# encounter. Generating dot graphs in parallel is controlled by the
+# DOT_NUM_THREADS setting.
+# Minimum value: 0, maximum value: 32, default value: 1.
+
+NUM_PROC_THREADS       = 1
+
 #---------------------------------------------------------------------------
 # Build related configuration options
 #---------------------------------------------------------------------------
@@ -508,6 +527,13 @@ EXTRACT_LOCAL_METHODS  = NO
 
 EXTRACT_ANON_NSPACES   = NO
 
+# If this flag is set to YES, the name of an unnamed parameter in a declaration
+# will be determined by the corresponding definition. By default unnamed
+# parameters remain unnamed in the output.
+# The default value is: YES.
+
+RESOLVE_UNNAMED_PARAMS = YES
+
 # If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
 # undocumented members inside documented classes or files. If set to NO these
 # members will be included in the various overviews, but no documentation
@@ -525,8 +551,8 @@ HIDE_UNDOC_MEMBERS     = NO
 HIDE_UNDOC_CLASSES     = NO
 
 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO, these declarations will be
+# declarations. If set to NO, these declarations will be included in the
-# included in the documentation.
+# documentation.
 # The default value is: NO.
 
 HIDE_FRIEND_COMPOUNDS  = NO
@@ -545,11 +571,18 @@ HIDE_IN_BODY_DOCS      = NO
 
 INTERNAL_DOCS          = NO
 
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# With the correct setting of option CASE_SENSE_NAMES doxygen will better be
-# names in lower-case letters. If set to YES, upper-case letters are also
+# able to match the capabilities of the underlying filesystem. In case the
-# allowed. This is useful if you have classes or files whose names only differ
+# filesystem is case sensitive (i.e. it supports files in the same directory
-# in case and if your file system supports case sensitive file names. Windows
+# whose names only differ in casing), the option must be set to YES to properly
-# (including Cygwin) ands Mac users are advised to set this option to NO.
+# deal with such files in case they appear in the input. For filesystems that
+# are not case sensitive the option should be be set to NO to properly deal with
+# output files written for symbols that only differ in casing, such as for two
+# classes, one named CLASS and the other named Class, and to also support
+# references to files without having to specify the exact matching casing. On
+# Windows (including Cygwin) and MacOS, users should typically set this option
+# to NO, whereas on Linux or other Unix flavors it should typically be set to
+# YES.
 # The default value is: system dependent.
 
 CASE_SENSE_NAMES       = NO
@@ -788,7 +821,10 @@ WARN_IF_DOC_ERROR      = YES
 WARN_NO_PARAMDOC       = YES
 
 # If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when
-# a warning is encountered.
+# a warning is encountered. If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS
+# then doxygen will continue running as if WARN_AS_ERROR tag is set to NO, but
+# at the end of the doxygen process doxygen will return with a non-zero status.
+# Possible values are: NO, YES and FAIL_ON_WARNINGS.
 # The default value is: NO.
 
 WARN_AS_ERROR          = NO
@@ -819,13 +855,13 @@ WARN_LOGFILE           = doxygen.errors
 # spaces. See also FILE_PATTERNS and EXTENSION_MAPPING
 # Note: If this tag is empty the current directory is searched.
 
-INPUT  = "src/catch2"
+INPUT                  = src/catch2
 
 # This tag can be used to specify the character encoding of the source files
 # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
 # libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: https://www.gnu.org/software/libiconv/) for the list of
+# documentation (see:
-# possible encodings.
+# https://www.gnu.org/software/libiconv/) for the list of possible encodings.
 # The default value is: UTF-8.
 
 INPUT_ENCODING         = UTF-8
@@ -838,13 +874,61 @@ INPUT_ENCODING         = UTF-8
 # need to set EXTENSION_MAPPING for the extension otherwise the files are not
 # read by doxygen.
 #
+# Note the list of default checked file patterns might differ from the list of
+# default file extension mappings.
+#
 # If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp,
 # *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h,
 # *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc,
-# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08,
+# *.m, *.markdown, *.md, *.mm, *.dox (to be provided as doxygen C comment),
-# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice.
+# *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, *.f18, *.f, *.for, *.vhd, *.vhdl,
+# *.ucf, *.qsf and *.ice.
 
-# FILE_PATTERNS          =
+FILE_PATTERNS          = *.c \
+                         *.cc \
+                         *.cxx \
+                         *.cpp \
+                         *.c++ \
+                         *.java \
+                         *.ii \
+                         *.ixx \
+                         *.ipp \
+                         *.i++ \
+                         *.inl \
+                         *.idl \
+                         *.ddl \
+                         *.odl \
+                         *.h \
+                         *.hh \
+                         *.hxx \
+                         *.hpp \
+                         *.h++ \
+                         *.cs \
+                         *.d \
+                         *.php \
+                         *.php4 \
+                         *.php5 \
+                         *.phtml \
+                         *.inc \
+                         *.m \
+                         *.markdown \
+                         *.md \
+                         *.mm \
+                         *.dox \
+                         *.py \
+                         *.pyw \
+                         *.f90 \
+                         *.f95 \
+                         *.f03 \
+                         *.f08 \
+                         *.f18 \
+                         *.f \
+                         *.for \
+                         *.vhd \
+                         *.vhdl \
+                         *.ucf \
+                         *.qsf \
+                         *.ice
 
 # The RECURSIVE tag can be used to specify whether or not subdirectories should
 # be searched for input files as well.
@@ -968,6 +1052,7 @@ FILTER_SOURCE_PATTERNS =
 # (index.html). This can be useful if you have a project on for instance GitHub
 # and want to reuse the introduction page also for the doxygen output.
 
+USE_MDFILE_AS_MAINPAGE =
 
 #---------------------------------------------------------------------------
 # Configuration options related to source browsing
@@ -1055,6 +1140,44 @@ USE_HTAGS              = NO
 
 VERBATIM_HEADERS       = YES
 
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see:
+# http://clang.llvm.org/) for more accurate parsing at the cost of reduced
+# performance. This can be particularly helpful with template rich C++ code for
+# which doxygen's built-in parser lacks the necessary type information.
+# Note: The availability of this option depends on whether or not doxygen was
+# generated with the -Duse_libclang=ON option for CMake.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled and the CLANG_ADD_INC_PATHS tag is set to
+# YES then doxygen will add the directory of each input to the include path.
+# The default value is: YES.
+
+CLANG_ADD_INC_PATHS    = YES
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+# If clang assisted parsing is enabled you can provide the clang parser with the
+# path to the directory containing a file called compile_commands.json. This
+# file is the compilation database (see:
+# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) containing the
+# options used when the source files were built. This is equivalent to
+# specifying the -p option to a clang tool, such as clang-check. These options
+# will then be passed to the parser. Any options specified with CLANG_OPTIONS
+# will be added as well.
+# Note: The availability of this option depends on whether or not doxygen was
+# generated with the -Duse_libclang=ON option for CMake.
+
+CLANG_DATABASE_PATH    =
+
 #---------------------------------------------------------------------------
 # Configuration options related to the alphabetical class index
 #---------------------------------------------------------------------------
@@ -1066,13 +1189,6 @@ VERBATIM_HEADERS       = YES
 
 ALPHABETICAL_INDEX     = YES
 
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
 # In case all classes in a project start with a common prefix, all classes will
 # be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
 # can be used to specify a prefix (or a list of prefixes) that should be ignored
@@ -1211,9 +1327,9 @@ HTML_TIMESTAMP         = NO
 
 # If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML
 # documentation will contain a main index with vertical navigation menus that
-# are dynamically created via Javascript. If disabled, the navigation index will
+# are dynamically created via JavaScript. If disabled, the navigation index will
 # consists of multiple levels of tabs that are statically embedded in every HTML
-# page. Disable this option to support browsers that do not have Javascript,
+# page. Disable this option to support browsers that do not have JavaScript,
 # like the Qt help browser.
 # The default value is: YES.
 # This tag requires that the tag GENERATE_HTML is set to YES.
@@ -1243,10 +1359,11 @@ HTML_INDEX_NUM_ENTRIES = 100
 
 # If the GENERATE_DOCSET tag is set to YES, additional index files will be
 # generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: https://developer.apple.com/xcode/), introduced with OSX
+# environment (see:
-# 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# https://developer.apple.com/xcode/), introduced with OSX 10.5 (Leopard). To
-# Makefile in the HTML output directory. Running make will produce the docset in
+# create a documentation set, doxygen will generate a Makefile in the HTML
-# that directory and running make install will install the docset in
+# output directory. Running make will produce the docset in that directory and
+# running make install will install the docset in
 # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
 # startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy
 # genXcode/_index.html for more information.
@@ -1288,8 +1405,8 @@ DOCSET_PUBLISHER_NAME  = Publisher
 # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
 # additional HTML index files: index.hhp, index.hhc, and index.hhk. The
 # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# (see:
-# Windows.
+# https://www.microsoft.com/en-us/download/details.aspx?id=21138) on Windows.
 #
 # The HTML Help Workshop contains a compiler that can convert all HTML output
 # generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
@@ -1364,7 +1481,8 @@ QCH_FILE               =
 
 # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
 # Project output. For more information please see Qt Help Project / Namespace
-# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace).
+# (see:
+# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace).
 # The default value is: org.doxygen.Project.
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
@@ -1372,8 +1490,8 @@ QHP_NAMESPACE          = org.doxygen.Project
 
 # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
 # Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual-
+# Folders (see:
-# folders).
+# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual-folders).
 # The default value is: doc.
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
@@ -1381,16 +1499,16 @@ QHP_VIRTUAL_FOLDER     = doc
 
 # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
 # filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-
+# Filters (see:
-# filters).
+# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHP_CUST_FILTER_NAME   =
 
 # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
 # custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-
+# Filters (see:
-# filters).
+# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHP_CUST_FILTER_ATTRS  =
@@ -1402,9 +1520,9 @@ QHP_CUST_FILTER_ATTRS  =
 
 QHP_SECT_FILTER_ATTRS  =
 
-# The QHG_LOCATION tag can be used to specify the location of Qt's
+# The QHG_LOCATION tag can be used to specify the location (absolute path
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# including file name) of Qt's qhelpgenerator. If non-empty doxygen will try to
-# generated .qhp file.
+# run qhelpgenerator on the generated .qhp file.
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHG_LOCATION           =
@@ -1481,6 +1599,17 @@ TREEVIEW_WIDTH         = 250
 
 EXT_LINKS_IN_WINDOW    = NO
 
+# If the HTML_FORMULA_FORMAT option is set to svg, doxygen will use the pdf2svg
+# tool (see https://github.com/dawbarton/pdf2svg) or inkscape (see
+# https://inkscape.org) to generate formulas as SVG images instead of PNGs for
+# the HTML output. These images will generally look nicer at scaled resolutions.
+# Possible values are: png (the default) and svg (looks nicer but requires the
+# pdf2svg or inkscape tool).
+# The default value is: png.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FORMULA_FORMAT    = png
+
 # Use this tag to change the font size of LaTeX formulas included as images in
 # the HTML documentation. When you change the font size after a successful
 # doxygen run you need to manually remove any form_*.png images from the HTML
@@ -1501,8 +1630,14 @@ FORMULA_FONTSIZE       = 10
 
 FORMULA_TRANSPARENT    = YES
 
+# The FORMULA_MACROFILE can contain LaTeX \newcommand and \renewcommand commands
+# to create new LaTeX commands to be used in formulas as building blocks. See
+# the section "Including formulas" for details.
+
+FORMULA_MACROFILE      =
+
 # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# https://www.mathjax.org) which uses client side Javascript for the rendering
+# https://www.mathjax.org) which uses client side JavaScript for the rendering
 # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
 # installed or if you want to formulas look prettier in the HTML output. When
 # enabled you may also need to install MathJax separately and configure the path
@@ -1514,7 +1649,7 @@ USE_MATHJAX            = YES
 
 # When MathJax is enabled you can set the default output format to be used for
 # the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
+# http://docs.mathjax.org/en/v2.7-latest/output.html) for more details.
 # Possible values are: HTML-CSS (which is slower, but has the best
 # compatibility), NativeMML (i.e. MathML) and SVG.
 # The default value is: HTML-CSS.
@@ -1530,7 +1665,7 @@ MATHJAX_FORMAT         = HTML-CSS
 # Content Delivery Network so you can quickly see the result without installing
 # MathJax. However, it is strongly recommended to install a local copy of
 # MathJax from https://www.mathjax.org before deployment.
-# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/.
+# The default value is: https://cdn.jsdelivr.net/npm/mathjax@2.
 # This tag requires that the tag USE_MATHJAX is set to YES.
 
 MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
@@ -1545,7 +1680,8 @@ MATHJAX_EXTENSIONS     = TeX/AMSmath \
 
 # The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
 # of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# (see:
+# http://docs.mathjax.org/en/v2.7-latest/output.html) for more details. For an
 # example see the documentation.
 # This tag requires that the tag USE_MATHJAX is set to YES.
 
@@ -1573,7 +1709,7 @@ MATHJAX_CODEFILE       =
 SEARCHENGINE           = YES
 
 # When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
+# implemented using a web server instead of a web client using JavaScript. There
 # are two flavors of web server based searching depending on the EXTERNAL_SEARCH
 # setting. When disabled, doxygen will generate a PHP script for searching and
 # an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
@@ -1592,7 +1728,8 @@ SERVER_BASED_SEARCH    = NO
 #
 # Doxygen ships with an example indexer (doxyindexer) and search engine
 # (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: https://xapian.org/).
+# Xapian (see:
+# https://xapian.org/).
 #
 # See the section "External Indexing and Searching" for details.
 # The default value is: NO.
@@ -1605,8 +1742,9 @@ EXTERNAL_SEARCH        = NO
 #
 # Doxygen ships with an example indexer (doxyindexer) and search engine
 # (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: https://xapian.org/). See the section "External Indexing and
+# Xapian (see:
-# Searching" for details.
+# https://xapian.org/). See the section "External Indexing and Searching" for
+# details.
 # This tag requires that the tag SEARCHENGINE is set to YES.
 
 SEARCHENGINE_URL       =
@@ -1770,9 +1908,11 @@ LATEX_EXTRA_FILES      =
 
 PDF_HYPERLINKS         = YES
 
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# If the USE_PDFLATEX tag is set to YES, doxygen will use the engine as
-# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# specified with LATEX_CMD_NAME to generate the PDF file directly from the LaTeX
-# higher quality PDF documentation.
+# files. Set this option to YES, to get a higher quality PDF documentation.
+#
+# See also section LATEX_CMD_NAME for selecting the engine.
 # The default value is: YES.
 # This tag requires that the tag GENERATE_LATEX is set to YES.
 
@@ -2204,7 +2344,7 @@ HIDE_UNDOC_RELATIONS   = YES
 # http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
 # Bell Labs. The other options in this section have no effect if this option is
 # set to NO
-# The default value is: NO.
+# The default value is: YES.
 
 HAVE_DOT               = YES
 
@@ -2283,10 +2423,32 @@ UML_LOOK               = NO
 # but if the number exceeds 15, the total amount of fields shown is limited to
 # 10.
 # Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
+# This tag requires that the tag UML_LOOK is set to YES.
 
 UML_LIMIT_NUM_FIELDS   = 10
 
+# If the DOT_UML_DETAILS tag is set to NO, doxygen will show attributes and
+# methods without types and arguments in the UML graphs. If the DOT_UML_DETAILS
+# tag is set to YES, doxygen will add type and arguments for attributes and
+# methods in the UML graphs. If the DOT_UML_DETAILS tag is set to NONE, doxygen
+# will not generate fields with class member information in the UML graphs. The
+# class diagrams will look similar to the default class diagrams but using UML
+# notation for the relationships.
+# Possible values are: NO, YES and NONE.
+# The default value is: NO.
+# This tag requires that the tag UML_LOOK is set to YES.
+
+DOT_UML_DETAILS        = NO
+
+# The DOT_WRAP_THRESHOLD tag can be used to set the maximum number of characters
+# to display on a single line. If the actual line length exceeds this threshold
+# significantly it will wrapped across multiple lines. Some heuristics are apply
+# to avoid ugly line breaks.
+# Minimum value: 0, maximum value: 1000, default value: 17.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_WRAP_THRESHOLD     = 17
+
 # If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
 # collaboration graphs will show the relations between templates and their
 # instances.
@@ -2360,7 +2522,9 @@ DIRECTORY_GRAPH        = NO
 # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
 # to make the SVG files visible in IE 9+ (other browsers do not have this
 # requirement).
-# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo,
+# Possible values are: png, png:cairo, png:cairo:cairo, png:cairo:gd, png:gd,
+# png:gd:gd, jpg, jpg:cairo, jpg:cairo:gd, jpg:gd, jpg:gd:gd, gif, gif:cairo,
+# gif:cairo:gd, gif:gd, gif:gd:gd, svg, png:gd, png:gd:gd, png:cairo,
 # png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and
 # png:gdiplus:gdiplus.
 # The default value is: png.
@@ -2476,9 +2640,11 @@ DOT_MULTI_TARGETS      = YES
 
 GENERATE_LEGEND        = YES
 
-# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate
 # files that are used to generate the various graphs.
+#
+# Note: This setting is not only used for dot files but also for msc and
+# plantuml temporary files.
 # The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
 
 DOT_CLEANUP            = YES