Merge remote-tracking branch 'origin/sk6812-assembly-test'

firmware/Makefile

@@ -12,7 +12,7 @@ endif
 
 #Add Files and Folders below#########################################################
 CFILES 	= main.c syscalls/syscalls.c setup/system_init.c startup/startup_stm32f0xx.c
-ASFILES =
+ASFILES = sk6812.S
 INCLUDEPATH = -Iinclude -Iinclude/cmsis
 
 OBJDIR=obj
@@ -39,7 +39,7 @@ LFLAGS += -mfloat-abi=soft --disable-newlib-supplied-syscalls -nostartfiles
 LFLAGS += -Tstartup/stm32f030.ld -Wl,-Map=$(mapfile).map -Wl,--gc-sections -g
 
 CFLAGS = -c -fmessage-length=0 -mlittle-endian -mthumb -mcpu=cortex-m0 -mthumb-interwork
-CFLAGS += -mfloat-abi=soft -nostartfiles -Wall -g
+CFLAGS += -mfloat-abi=soft -nostartfiles -Wall -g -O3
 
 ####################################################################################
 

firmware/main.c

@@ -1,19 +1,165 @@
 #include <stm32f0xx.h>
+#include <cmsis/core_cm0.h>
+#include <stdbool.h>
 
+#define RING_MAX_LED	30u
+
+enum ring_modes {
+	RING_MODE_ALL,
+	RING_MODE_RED,
+	RING_MODE_GREEN,
+	RING_MODE_BLUE,
+	RING_MODE_WHITE,
+	RING_MODE_ARC,
+	RING_MODE_QUARTER,
+	RING_MODE_IN_FARBE_UND_BUNT,
+	RING_MODE_MAX
+};
 
 unsigned int i = 0x12345678;
 unsigned char c = 2;
 
-int main(void) {
+extern void sk6812_send_led(uint32_t rgbw);
-	RCC->AHBENR |= RCC_AHBENR_GPIOBEN;
+
-	GPIOB->MODER |= (1<<1*2);
+volatile uint32_t wait_tick = 0;
-	GPIOB->ODR |= (1<<1);
+
+static void wait_for_ticks(uint32_t ticks)
+{
+	wait_tick = 0;
+	while (wait_tick < ticks);
+}
+
+int main(void)
+{
+	uint32_t led_val = 0x00UL;
+	uint32_t led_calc_val[RING_MAX_LED] = {0x00UL};
+	bool button_pressed = false;
+	enum ring_modes mode = RING_MODE_ALL;
+
+	RCC->AHBENR |= RCC_AHBENR_GPIOAEN;
+	RCC->APB1ENR |= RCC_APB1ENR_TIM3EN;
+
+	GPIOA->MODER |= (2<<7*2)|(2<<6*2)|(1<<3*2);
+
+	/* enable pullups on encoder inputs */
+	GPIOA->PUPDR |= (1<<7*2)|(1<<6*2)|(1<<0*2);
+	/* enable TIM3 on encoder inputs */
+	GPIOA->AFR[0] |= (1<<7*4)|(1<<6*4);
+
+	TIM3->ARR = 0xFFFF;
+	TIM3->CNT = 0;
+	TIM3->CR2 = 0;
+	TIM3->SMCR = TIM_SMCR_SMS_0;
+	TIM3->CCMR1 = TIM_CCMR1_CC1S_0 | TIM_CCMR1_CC2S_1;
+	TIM3->CCER = TIM_CCER_CC1P | TIM_CCER_CC2P;
+	TIM3->PSC = 0;
+	TIM3->CR1 = TIM_CR1_CEN;
+
 	SysTick_Config(800000);
 	while(1) {
-		i++;
+
+		switch (mode)
+		{
+		case RING_MODE_ALL:
+			for(int i = 0; i < RING_MAX_LED; i ++) {
+				led_calc_val[i] = (led_val << 24) + (led_val << 16) + (led_val << 8) + led_val; 
+			}
+			break;
+		case RING_MODE_RED:
+			for(int i = 0; i < RING_MAX_LED; i ++) {
+				led_calc_val[i] = led_val << 16;
+			}
+			break;
+		case RING_MODE_GREEN:
+			for(int i = 0; i < RING_MAX_LED; i ++) {
+				led_calc_val[i] = led_val << 24; 
+			}
+			break;
+		case RING_MODE_BLUE:
+			for(int i = 0; i < RING_MAX_LED; i ++) {
+				led_calc_val[i] = led_val << 8; 
+			}
+			break;
+		case RING_MODE_WHITE:
+			for(int i = 0; i < RING_MAX_LED; i ++) {
+				led_calc_val[i] = led_val; 
+			}
+			break;
+		case RING_MODE_ARC:
+			for(int i = 0; i < RING_MAX_LED; i ++) {
+				if(led_val > i*8) {
+					led_calc_val[i] = 0xFFFFFFFFUL; 
+				}
+				else {
+					led_calc_val[i] = 0x00000000UL;
+				}
+			}
+			break;
+		case RING_MODE_QUARTER:
+			for(int i = 0; i < RING_MAX_LED; i ++) {
+				if((led_val / 7 > i) && (led_val / 7 < (i + 7))) {
+					led_calc_val[i] = 0xFFFFFFFFUL; 
+				}
+				else {
+					led_calc_val[i] = 0x00000000UL;
+				}
+			}
+			break;
+		case RING_MODE_IN_FARBE_UND_BUNT:
+			for(int i = 0; i < RING_MAX_LED; i ++) {
+				switch ((led_val + (i / 3)) % 3)
+				{
+				case 0:
+					led_calc_val[i] = 0x00FF0000UL;
+					break;
+				case 1:
+					led_calc_val[i] = 0xFF000000UL;
+					break;
+				case 2:
+					led_calc_val[i] = 0x0000FF00UL;
+					break;
+				
+				default:
+					break;
+				}
+			}
+			break;
+		default:
+			for(int i = 0; i < RING_MAX_LED; i ++) {
+				led_calc_val[i] = 0x00000000UL;
+			}
+			break;
+		}
+		__disable_irq();
+		for(int i = 0; i < RING_MAX_LED; i ++) {
+			sk6812_send_led(led_calc_val[i]);
+		}
+		__enable_irq();
+		wait_for_ticks(5);
+
+		if((int16_t)TIM3->CNT > (int16_t)led_val) {
+			led_val = 0u;
+		}
+		else if(((int16_t)led_val - (int16_t)TIM3->CNT) > UINT8_MAX) {
+			led_val = 255u;
+		}
+		else {
+			led_val = (int16_t)led_val - (int16_t)TIM3->CNT;
+		}
+		TIM3->CNT = 0u;
+
+		if(button_pressed) {
+			if(GPIOA->IDR & GPIO_IDR_0) {
+				button_pressed = false;
+			}
+		}
+		else if(!(GPIOA->IDR & GPIO_IDR_0)) {
+			mode = (mode + 1) % RING_MODE_MAX;
+			button_pressed = true;
+		}
 	}
 }
 
 void SysTick_Handler(void) {
-	GPIOB->ODR ^= (1<<1);
+	wait_tick++;
-}
+}

firmware/setup/system_init.c

@@ -61,10 +61,44 @@ static void __init_default_clocks(void)
   RCC->CIR = 0x00000000;
 }
 
+void __setup_clocks(void)
+{
+	uint32_t tmp;
+	
+	/* Switch PLL source to HSE OSC */
+	RCC->CFGR |= RCC_CFGR_PLLSRC;
+
+	/* Divide HSE by 2 to match HSI */
+	RCC->CFGR2 = 0x00000001;
+
+	/* Enable HSE and wait for it to become ready */
+	RCC->CR |= RCC_CR_HSEON;
+	
+	/* Wait for HSE to be ready */
+	while (!(RCC->CR & RCC_CR_HSERDY));
+
+	/* Set PLL multiplication to 12 (4 MHz * 12 = 48 MHz SysClk) */
+	RCC->CFGR |= RCC_CFGR_PLLMUL_3 | RCC_CFGR_PLLMUL_1;
+		
+	/* HSI Already running. Switch on PLL */
+	RCC->CR |= RCC_CR_PLLON;
+	
+	/* Wait for PLL to be ready */
+	while (!(RCC->CR & RCC_CR_PLLRDY));
+	
+	/* Switch System Clock to PLL */
+	tmp = RCC->CFGR;
+	tmp &= ~0x3;
+	tmp |= RCC_CFGR_SW_1;
+	RCC->CFGR = tmp;
+
+	/* Turn off HSI */
+	RCC->CR &= ~RCC_CR_HSEON;
+}
 
 void __system_init(void)
 {
 
- __init_default_clocks();
+	__init_default_clocks();
- 
+	__setup_clocks(); 
 }

firmware/sk6812.S

@@ -0,0 +1,47 @@
+.global sk6812_send_led
+
+.equ BSRR_REGISTER, 0x48000018
+.equ PINNUM, 3
+.syntax unified
+
+sk6812_send_led:
+	push {lr}
+	push {r4, r5, r6}
+	ldr r1, =BSRR_REGISTER
+	ldr r2, =(1<<PINNUM)
+	ldr r3, =(1<<(PINNUM+16))
+	ldr r4, =32
+	ldr r5, =0x80000000
+_bitloop:
+	tst r0, r5
+	beq sk6812_send_zero	
+	bne sk6812_send_one
+_bitloop_ret:
+	lsls r0, r0, #1
+	subs r4, r4, #1
+	bne _bitloop
+	pop {r4, r5, r6}
+	pop {pc}
+	
+sk6812_send_one:
+	str r2, [r1]
+	ldr r6, =0x5
+	bl wait_r6
+	str r3, [r1]
+	ldr r6, =0x2
+	bl wait_r6
+	b _bitloop_ret
+
+sk6812_send_zero:
+	str r2, [r1]
+	ldr r6, =0x1
+	bl wait_r6
+	str r3, [r1]
+	ldr r6, =0x5
+	bl wait_r6
+	b _bitloop_ret
+	
+wait_r6:
+	subs r6, r6, #1
+	bne wait_r6
+	bx lr