reflow-oven-control-sw/doc/source/firmware/pid-controller.rst

36 lines
1.5 KiB
ReStructuredText
Raw Normal View History

2021-06-14 23:16:07 +02:00
.. _pid_controller:
PID Controller
==============
The PID controller is the main element of the oven. It controls the output of the solid state relais in order to achieve the desired temperature.
The PID controller is implemented in the ``pid-controller.c`` file. See the :ref:`pid_code_api` for details.
Functional Description
----------------------
The following figure shows the PID controller's structure.
.. drawio-image:: pid.drawio
The controller is composed of 3 paths. The proportional, the derivate, and the integrator path.
Compared to a textbook PID controller, this version contains a few additional features.
The integrator has a configurable maximum limit of :c:var:`pid_controller.integral_max`. Once this value is reached (plus or minus), the integrator freezes.
The integrator is also frozen in case the output value is in saturation. This serves as an anti-windup protection.
The output value saturates at configurable high and low limits (:c:var:`pid_controller.output_sat_max` and :c:var:`pid_controller.output_sat_min`). The controller instance used for the
reflow oven's solid state relais output is saturated by software to a limit of 0 to 100.
In addition to the above features, the derivate term contains an additional first order low pass filter in order to prevent coupling of high frequency noise amplified by the derivate term.
The low pass filter is charcterized by its time constant :math:`k_{d\tau}`.
.. _pid_code_api:
PID Controller Code API
-----------------------
.. doxygengroup:: pid-controller
:project: Reflow Controller Firmware