reflow-oven-control-sw/stm-firmware/main.c

/* Reflow Oven Controller
 *
 * Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
 *
 * This file is part of the Reflow Oven Controller Project.
 *
 * The reflow oven controller is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * The Reflow Oven Control Firmware is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with the reflow oven controller project.
 * If not, see <http://www.gnu.org/licenses/>.
 */

/**
 * @file main.c
 * @brief Main file for firmware
 */

#include <stdlib.h>
#include <string.h>
/* #include <arm_math.h> */
#include <stm32/stm32f4xx.h>
#include <cmsis/core_cm4.h>
#include <setup/system_stm32f4xx.h>
#include <reflow-controller/systick.h>
#include <reflow-controller/adc-meas.h>
#include <reflow-controller/shell.h>
#include <reflow-controller/pid-controller.h>
#include <reflow-controller/digio.h>
#include <reflow-controller/temp-converter.h>
#include <reflow-controller/rotary-encoder.h>
#include <stm-periph/stm32-gpio-macros.h>
#include <stm-periph/clock-enable-manager.h>
#include <stm-periph/uart.h>
#include <reflow-controller/shell-uart-config.h>
#include <helper-macros/helper-macros.h>
#include <fatfs/ff.h>

static void setup_nvic_priorities()
{
	/* No sub priorities */
	NVIC_SetPriorityGrouping(2);

	/* Setup Priorities */
	NVIC_SetPriority(ADC_IRQn, 2);
	NVIC_SetPriority(DMA2_Stream0_IRQn, 1);
	NVIC_SetPriority(DMA2_Stream7_IRQn, 3);
}

static float pt1000_value;
static volatile int pt1000_value_status;
static uint32_t rot;
static volatile float pid_out;
static volatile float current_temperature;

static inline void uart_gpio_config()
{
#ifdef DEBUGBUILD
	rcc_manager_enable_clock(&RCC->AHB1ENR, BITMASK_TO_BITNO(SHELL_UART_PORT_RCC_MASK));
	SHELL_UART_PORT->MODER &=  MODER_DELETE(SHELL_UART_TX_PIN) & MODER_DELETE(SHELL_UART_RX_PIN);
	SHELL_UART_PORT->MODER |= ALTFUNC(SHELL_UART_RX_PIN) | ALTFUNC(SHELL_UART_TX_PIN);
	SETAF(SHELL_UART_PORT, SHELL_UART_RX_PIN, SHELL_UART_RX_PIN_ALTFUNC);
	SETAF(SHELL_UART_PORT, SHELL_UART_TX_PIN, SHELL_UART_TX_PIN_ALTFUNC);
#endif
}


static char shell_uart_tx_buff[128];
static char shell_uart_rx_buff[32];
struct stm_uart shell_uart;

static shellmatta_retCode_t write_shell_callback(const char *data, uint32_t len)
{
	uart_send_array_with_dma(&shell_uart, data, len);
	return SHELLMATTA_OK;
}

static inline void setup_sell_uart(struct stm_uart *uart)
{
	uart->rx = 1;
	uart->tx = 1;
	uart->brr_val = SHELL_UART_BRR_REG_VALUE;
	uart->rcc_reg = &SHELL_UART_RCC_REG;
	uart->rcc_bit_no = BITMASK_TO_BITNO(SHELL_UART_RCC_MASK);
	uart->uart_dev = SHELL_UART_PERIPH;
	uart->dma_rx_buff = shell_uart_rx_buff;
	uart->dma_tx_buff = shell_uart_tx_buff;
	uart->rx_buff_count = sizeof(shell_uart_rx_buff);
	uart->tx_buff_count = sizeof(shell_uart_tx_buff);
	uart->base_dma_num = 2;
	uart->dma_rx_stream = SHELL_UART_RECEIVE_DMA_STREAM;
	uart->dma_tx_stream = SHELL_UART_SEND_DMA_STREAM;
	uart->dma_rx_trigger_channel = SHELL_UART_RX_DMA_TRIGGER;
	uart->dma_tx_trigger_channel = SHELL_UART_TX_DMA_TRIGGER;

	uart_init(uart);
	NVIC_EnableIRQ(DMA2_Stream7_IRQn);
}

const char *oven_controller_hello_world = "Hello world :)\n";

int main()
{
	FATFS fs;
	FIL test_file;
	const char *uart_input;
	size_t uart_input_len;
	shellmatta_handle_t shell_handle;
	int uart_receive_status;

	static struct pid_controller pid;
	uint64_t pid_timestamp = 0;

	setup_nvic_priorities();
	systick_setup();

	adc_pt1000_setup_meas();

	digio_setup_default_all();
	led_setup();
	loudspeaker_setup();
	rotary_encoder_setup();

	uart_gpio_config();
	setup_sell_uart(&shell_uart);

	shell_handle = shell_init(write_shell_callback);

	if (f_mount(&fs, "0:/", 1) == FR_OK) {
		f_open(&test_file, "hello-world.txt", FA_OPEN_APPEND | FA_WRITE);
		f_write(&test_file, oven_controller_hello_world, strlen(oven_controller_hello_world), NULL);
		f_close(&test_file);
	}

	pid_init(&pid, 0.1, 0.1, 4.0, 0.0, 100.0, 40.0);
	pid_zero(&pid);

	while (1) {
		pt1000_value_status = adc_pt1000_get_current_resistance(&pt1000_value);

		if (pt1000_value_status >= 0) {
			(void)temp_converter_convert_resistance_to_temp(pt1000_value, (float *)&current_temperature);
			if ((systick_get_global_tick() - pid_timestamp) >= 250) {
				pid_out = pid_sample(&pid, 100.0 - current_temperature);
				pid_timestamp = systick_get_global_tick();
			}
		}

		rot = rotary_encoder_get_abs_val();
		uart_receive_status = uart_receive_data_with_dma(&shell_uart, &uart_input, &uart_input_len);
		if (uart_receive_status >= 1)
			shell_handle_input(shell_handle, uart_input, uart_input_len);
	}

}

void sdio_wait_ms(uint32_t ms)
{
	systick_wait_ms(ms);
}

void DMA2_Stream7_IRQHandler()
{
	uint32_t hisr = DMA2->HISR;
	DMA2->HIFCR = hisr;

	if (hisr & DMA_HISR_TCIF7) {
		uart_tx_dma_complete_int_callback(&shell_uart);
	}
}