reflow-oven-control-sw/stm-firmware/Makefile

################################Shimatta Makefile####################################
#CPU:		STM32F407VET6
#Compiler:	arm-none-eabi
#####################################################################################
#Add Files and Folders below#########################################################
CFILES 	= main.c syscalls.c setup/system_stm32f4xx.c systick.c boot/startup_stm32f407vx.c
ASFILES =
INCLUDEPATH = -Iinclude

OBJDIR_BASE = obj
TARGET_BASE = reflow-controller
LIBRARYPATH = -L.
LIBRARIES =

DEFINES = -DSTM32F407xx -DSTM32F4XX -DARM_MATH_CM4 -DHSE_VALUE=8000000UL
MAPFILE_BASE = memory-mapping
LINKER_SCRIPT=stm32f407vet6_flash.ld

export GIT_VER = $(shell git describe --always --dirty --tags)
DEFINES += -DGIT_VER=$(GIT_VER)

ifneq ($(VERBOSE),true)
QUIET=@
else
QUIET=
endif

##Custom Files###
CFILES += adc-meas.c

# Shellmatta
CFILES += shellmatta/src/shellmatta.c shellmatta/src/shellmatta_autocomplete.c shellmatta/src/shellmatta_escape.c shellmatta/src/shellmatta_history.c shellmatta/src/shellmatta_utils.c shellmatta/src/shellmatta_opt.c shell.c
INCLUDEPATH += -Ishellmatta/api
DEFINES += -DSHELLMATTA_HELP_ALIAS=\"?\"

# RCC Manager
CFILES += stm-periph/rcc-manager.c
CFILES += stm-periph/uart.c stm-periph/dma-ring-buffer.c stm-periph/backup-ram.c
CFILES += stm-periph/rng.c
CFILES += digio.c
CFILES += stm-periph/unique-id.c
CFILES += calibration.c
CFILES += temp-converter.c
CFILES += rotary-encoder.c button.c
CFILES += ui/lcd.c ui/menu.c ui/gui.c
CFILES += fatfs/diskio.c fatfs/ff.c fatfs/ffsystem.c fatfs/ffunicode.c fatfs/shimatta_sdio_driver/shimatta_sdio.c
CFILES += pid-controller.c oven-driver.c
CFILES += settings/settings.c settings/settings-sd-card.c
CFILES += stm-periph/crc-unit.c
CFILES += safety/safety-adc.c safety/safety-controller.c safety/watchdog.c safety/fault.c safety/safety-memory.c safety/stack-check.c
CFILES += hw-version-detect.c
CFILES += config-parser/config-parser.c
INCLUDEPATH += -Iconfig-parser/include

CFILES += base64-lib/src/base64-lib.c
INCLUDEPATH += -Ibase64-lib/include
DEFINES += -DBASE64_LOOKUP_TABLE_SECTION="\".ccm.bss\""


DEBUG_DEFINES = -DDEBUGBUILD
RELEASE_DEFINES = -DUART_ON_DEBUG_HEADER

###################################################################################
ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE=arm-none-eabi-
endif

CC=$(CROSS_COMPILE)gcc
OBJCOPY=$(CROSS_COMPILE)objcopy
OBJDUMP=$(CROSS_COMPILE)objdump
SIZE=$(CROSS_COMPILE)size

CFLAGS_RELEASE = -O3 -g
CFLAGS_DEBUG = -O0 -g

LFLAGS_RELEASE = -Wl,--gc-sections
LFLAGS_DEBUG =

CFLAGS =
LFLAGS =

ifneq ($(DEBUGBUILD),true)
DEFINES += $(RELEASE_DEFINES)
CFLAGS += $(CFLAGS_RELEASE)
LFLAGS += $(LFLAGS_RELEASE)
target = $(TARGET_BASE)-release
OBJDIR = $(OBJDIR_BASE)/release
MAPFILE = $(MAPFILE_BASE)-release
else
DEFINES += $(DEBUG_DEFINES)
target = $(TARGET_BASE)-debug
CFLAGS += $(CFLAGS_DEBUG)
LFLAGS += $(LFLAGS_DEBUG)
OBJDIR = $(OBJDIR_BASE)/debug
MAPFILE = $(MAPFILE_BASE)-debug
endif

LFLAGS += -mlittle-endian -mthumb -mcpu=cortex-m4 -mthumb-interwork
LFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 --disable-newlib-supplied-syscalls -nostartfiles
LFLAGS += -T$(LINKER_SCRIPT) -Wl,-Map=$(MAPFILE).map -Wl,--print-memory-usage

CFLAGS += -c -mlittle-endian -mthumb -mcpu=cortex-m4 -mthumb-interwork
CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 -nostartfiles
CFLAGS += -Wall -Wextra -Wold-style-declaration -Wuninitialized -Wmaybe-uninitialized -Wunused-parameter -Wimplicit-fallthrough=3 -Wsign-compare

####################################################################################

OBJ = $(CFILES:%.c=$(OBJDIR)/%.c.o)
ASOBJ += $(ASFILES:%.S=$(OBJDIR)/%.S.o)

default: $(target).elf

all: debug release

release:
	$(QUIET)$(MAKE) DEBUGBUILD=false

debug:
	$(QUIET)$(MAKE) DEBUGBUILD=true

%.bin: %.elf
	$(QUIET)$(OBJCOPY) -O binary $^ $@
%.hex: %.elf
	$(QUIET)$(OBJCOPY) -O ihex $^ $@

#Linking
$(target).elf: $(OBJ) $(ASOBJ) $(LINKER_SCRIPT)
	@echo [LD] $@
	$(QUIET)$(CC) $(LFLAGS) $(LIBRARYPATH) -o $@ $(OBJ) $(ASOBJ) $(LIBRARIES)
	$(QUIET)$(SIZE) $@
	@echo "Built Version $(GIT_VER)"

#Compiling
$(OBJ):
	@echo [CC] $@
	$(eval OUTPATH=$(dir $@))
	@mkdir -p $(OUTPATH)
	$(QUIET)$(CC) $(CFLAGS) -MMD -MT $@ $(INCLUDEPATH) $(DEFINES) -o $@ $(@:$(OBJDIR)/%.c.o=%.c)
$(ASOBJ):
	@echo [AS] $@
	$(eval OUTPATH=$(dir $@))
	@mkdir -p $(OUTPATH)
	$(QUIET)$(CC) $(CFLAGS) -MMD -MT $@ $(INCLUDEPATH) $(DEFINES) -o $@ $(@:$(OBJDIR)/%.S.o=%.S)


.PHONY: qtproject-legacy qtproject qtproject-debug clean mrproper objcopy disassemble program program-debug

program-debug:
	$(QUIET)$(MAKE) DEBUGBUILD=true program

program: $(target).elf
	./program-device.sh $<

disassemble: $(target).elf
	$(QUIET)$(OBJDUMP) -D -s $< > $(target).lss

objcopy: $(target).bin $(target).hex

mrproper: clean
ifneq ($(DEBUGBUILD),true)
	@echo "Purging RELEASE project files"
else
	@echo "Purging DEBUG project files"
endif
	$(QUIET)rm -f $(target).pro $(target).creator $(target).files $(target).cflags $(target).cxxflags $(target).includes $(target).config
ifneq ($(DEBUGBUILD),true)
	$(QUIET)$(MAKE) DEBUGBUILD=true mrproper
endif


clean:
	@echo -n "Cleaning up derived files for "
ifneq ($(DEBUGBUILD),true)
	@echo "RELEASE build"
else
	@echo "DEBUG build"
endif
	$(QUIET)rm -f $(target).elf $(target).bin $(target).hex $(OBJ) $(ASOBJ) $(mapfile).map $(CFILES:%.c=$(OBJDIR)/%.c.d) $(ASFILES:%.S=$(OBJDIR)/%.S.d) 
	$(QUIET)rm -rf $(OBJDIR)/*
ifneq ($(DEBUGBUILD),true)
	$(QUIET)$(MAKE) DEBUGBUILD=true clean
endif

qtproject-legacy:
	echo -e "TEMPLATE = app\nCONFIG -= console app_bundle qt" > $(target).pro
	echo -e "SOURCES += $(CFILES) $(ASFILES)" >> $(target).pro
	echo -ne "INCLUDEPATH += " >> $(target).pro
	echo "$(INCLUDEPATH)" | sed "s!-I!./!g" >> $(target).pro
	echo -ne "HEADERS += " >> $(target).pro
	find -name "*.h" | tr "\\n" " " >> $(target).pro
	echo -ne "\nDEFINES += " >> $(target).pro
	echo "$(DEFINES)" | sed "s/-D//g" >> $(target).pro

qtproject-debug:
	@echo "Generating debug build project"
	$(QUIET)$(MAKE) DEBUGBUILD=true qtproject

qtproject:
	$(QUIET)rm -f $(target).files $(target).cflags $(target).config $(target).creator $(target).includes $(target).creator.user
	@echo "Generating source file list"
	$(QUIET)echo "$(CFILES)" | tr ' ' '\n' > $(target).files
	@echo -n "Appending found header files from folders "
	@echo `echo $(INCLUDEPATH) | sed "s/-I//g"`
	$(QUIET)for dir in `echo $(INCLUDEPATH) | sed "s/-I//g"`; do \
		find `echo "$${dir}"` -name "*.h" >> $(target).files; \
	done
	@echo "Generating $(target).cflags"
	$(QUIET)echo "" > $(target).cflags
	@echo "Generating $(target).includes"
	$(QUIET)echo $(INCLUDEPATH) | sed "s/-I/,/g" | tr , '\n' | sed "/^$$/d" > $(target).includes;
	@echo "Generating $(target).config"
	$(QUIET)echo $(DEFINES) | sed "s/-D/,#define /g" | tr , '\n' | sed "/^$$/d" > $(target).config
	@echo "Generating $(target).creator"
	$(QUIET)echo "[GENERAL]" > $(target).creator

-include $(CFILES:%.c=$(OBJDIR)/%.c.d) $(ASFILES:%.S=$(OBJDIR)/%.S.d)