2020-01-26 15:27:06 +01:00
|
|
|
/**
|
|
|
|
******************************************************************************
|
|
|
|
* @file system_stm32f4xx.c
|
|
|
|
* @author MCD Application Team
|
|
|
|
* @version V1.0.1
|
|
|
|
* @date 09-August-2014
|
|
|
|
* @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
|
|
|
|
* This file contains the system clock configuration for STM32F4xx devices,
|
|
|
|
* and is generated by the clock configuration tool
|
|
|
|
* stm32f4xx_Clock_Configuration_V1.0.1.xls
|
|
|
|
*
|
|
|
|
* 1. This file provides two functions and one global variable to be called from
|
|
|
|
* user application:
|
|
|
|
* - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
|
|
|
|
* and Divider factors, AHB/APBx prescalers and Flash settings),
|
|
|
|
* depending on the configuration made in the clock xls tool.
|
|
|
|
* This function is called at startup just after reset and
|
|
|
|
* before branch to main program. This call is made inside
|
|
|
|
* the "startup_stm32f4xx.s" file.
|
|
|
|
*
|
|
|
|
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
|
|
|
|
* by the user application to setup the SysTick
|
|
|
|
* timer or configure other parameters.
|
|
|
|
*
|
|
|
|
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
|
|
|
|
* be called whenever the core clock is changed
|
|
|
|
* during program execution.
|
|
|
|
*
|
|
|
|
* 2. After each device reset the HSI (16 MHz) is used as system clock source.
|
|
|
|
* Then SystemInit() function is called, in "startup_stm32f4xx.s" file, to
|
|
|
|
* configure the system clock before to branch to main program.
|
|
|
|
*
|
|
|
|
* 3. If the system clock source selected by user fails to startup, the SystemInit()
|
|
|
|
* function will do nothing and HSI still used as system clock source. User can
|
|
|
|
* add some code to deal with this issue inside the SetSysClock() function.
|
|
|
|
*
|
|
|
|
* 4. The default value of HSE crystal is set to 25MHz, refer to "HSE_VALUE" define
|
|
|
|
* in "stm32f4xx.h" file. When HSE is used as system clock source, directly or
|
|
|
|
* through PLL, and you are using different crystal you have to adapt the HSE
|
|
|
|
* value to your own configuration.
|
|
|
|
*
|
|
|
|
* 5. This file configures the system clock as follows:
|
|
|
|
*=============================================================================
|
|
|
|
*=============================================================================
|
|
|
|
* Supported STM32F4xx device revision | Rev A
|
|
|
|
*-----------------------------------------------------------------------------
|
|
|
|
* System Clock source | PLL (HSE)
|
|
|
|
*-----------------------------------------------------------------------------
|
|
|
|
* SYSCLK(Hz) | 168000000
|
|
|
|
*-----------------------------------------------------------------------------
|
|
|
|
* HCLK(Hz) | 168000000
|
|
|
|
*-----------------------------------------------------------------------------
|
|
|
|
* AHB Prescaler | 1
|
|
|
|
*-----------------------------------------------------------------------------
|
|
|
|
* APB1 Prescaler | 4
|
|
|
|
*-----------------------------------------------------------------------------
|
|
|
|
* APB2 Prescaler | 2
|
|
|
|
*-----------------------------------------------------------------------------
|
|
|
|
* HSE Frequency(Hz) | 8000000
|
|
|
|
*-----------------------------------------------------------------------------
|
|
|
|
* PLL_M | 8
|
|
|
|
*-----------------------------------------------------------------------------
|
|
|
|
* PLL_N | 336
|
|
|
|
*-----------------------------------------------------------------------------
|
|
|
|
* PLL_P | 2
|
|
|
|
*-----------------------------------------------------------------------------
|
|
|
|
* PLL_Q | 7
|
|
|
|
*-----------------------------------------------------------------------------
|
|
|
|
* PLLI2S_N | NA
|
|
|
|
*-----------------------------------------------------------------------------
|
|
|
|
* PLLI2S_R | NA
|
|
|
|
*-----------------------------------------------------------------------------
|
|
|
|
* I2S input clock | NA
|
|
|
|
*-----------------------------------------------------------------------------
|
|
|
|
* VDD(V) | 3.3
|
|
|
|
*-----------------------------------------------------------------------------
|
|
|
|
* Main regulator output voltage | Scale1 mode
|
|
|
|
*-----------------------------------------------------------------------------
|
|
|
|
* Flash Latency(WS) | 5
|
|
|
|
*-----------------------------------------------------------------------------
|
|
|
|
* Prefetch Buffer | OFF
|
|
|
|
*-----------------------------------------------------------------------------
|
|
|
|
* Instruction cache | ON
|
|
|
|
*-----------------------------------------------------------------------------
|
|
|
|
* Data cache | ON
|
|
|
|
*-----------------------------------------------------------------------------
|
|
|
|
* Require 48MHz for USB OTG FS, | Disabled
|
|
|
|
* SDIO and RNG clock |
|
|
|
|
*-----------------------------------------------------------------------------
|
|
|
|
*=============================================================================
|
|
|
|
******************************************************************************
|
|
|
|
* @attention
|
|
|
|
*
|
|
|
|
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
|
|
|
|
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
|
|
|
|
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
|
|
|
|
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
|
|
|
|
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
|
|
|
|
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
|
|
|
|
*
|
|
|
|
* <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
|
|
|
|
******************************************************************************
|
|
|
|
*/
|
|
|
|
|
|
|
|
/** @addtogroup CMSIS
|
|
|
|
* @{
|
|
|
|
*/
|
|
|
|
|
|
|
|
/** @addtogroup stm32f4xx_system
|
|
|
|
* @{
|
|
|
|
*/
|
|
|
|
|
|
|
|
/** @addtogroup STM32F4xx_System_Private_Includes
|
|
|
|
* @{
|
|
|
|
*/
|
|
|
|
|
2020-02-12 21:00:35 +01:00
|
|
|
#include <stm32/stm32f4xx.h>
|
2020-01-26 15:27:06 +01:00
|
|
|
|
|
|
|
/**
|
|
|
|
* @}
|
|
|
|
*/
|
|
|
|
|
|
|
|
/** @addtogroup STM32F4xx_System_Private_TypesDefinitions
|
|
|
|
* @{
|
|
|
|
*/
|
|
|
|
|
|
|
|
/**
|
|
|
|
* @}
|
|
|
|
*/
|
|
|
|
|
|
|
|
/** @addtogroup STM32F4xx_System_Private_Defines
|
|
|
|
* @{
|
|
|
|
*/
|
|
|
|
|
|
|
|
/************************* Miscellaneous Configuration ************************/
|
|
|
|
/*!< Uncomment the following line if you need to use external SRAM mounted
|
|
|
|
on STM324xG_EVAL board as data memory */
|
|
|
|
/* #define DATA_IN_ExtSRAM */
|
|
|
|
|
|
|
|
/*!< Uncomment the following line if you need to relocate your vector Table in
|
|
|
|
Internal SRAM. */
|
|
|
|
/* #define VECT_TAB_SRAM */
|
|
|
|
#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
|
|
|
|
This value must be a multiple of 0x200. */
|
|
|
|
/******************************************************************************/
|
|
|
|
|
|
|
|
/************************* PLL Parameters *************************************/
|
|
|
|
/* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N */
|
|
|
|
#define PLL_M 8
|
|
|
|
#define PLL_N 336
|
|
|
|
|
|
|
|
/* SYSCLK = PLL_VCO / PLL_P */
|
|
|
|
#define PLL_P 2
|
|
|
|
|
|
|
|
/* USB OTG FS, SDIO and RNG Clock = PLL_VCO / PLLQ */
|
|
|
|
#define PLL_Q 7
|
|
|
|
|
|
|
|
/******************************************************************************/
|
|
|
|
|
|
|
|
/**
|
|
|
|
* @}
|
|
|
|
*/
|
|
|
|
|
|
|
|
/** @addtogroup STM32F4xx_System_Private_Macros
|
|
|
|
* @{
|
|
|
|
*/
|
|
|
|
|
|
|
|
/**
|
|
|
|
* @}
|
|
|
|
*/
|
|
|
|
|
|
|
|
/** @addtogroup STM32F4xx_System_Private_Variables
|
|
|
|
* @{
|
|
|
|
*/
|
|
|
|
|
|
|
|
uint32_t SystemCoreClock = 168000000;
|
|
|
|
|
|
|
|
__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* @}
|
|
|
|
*/
|
|
|
|
|
|
|
|
/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes
|
|
|
|
* @{
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void SetSysClock(void);
|
|
|
|
#ifdef DATA_IN_ExtSRAM
|
|
|
|
static void SystemInit_ExtMemCtl(void);
|
|
|
|
#endif /* DATA_IN_ExtSRAM */
|
|
|
|
|
|
|
|
/**
|
|
|
|
* @}
|
|
|
|
*/
|
|
|
|
|
|
|
|
/** @addtogroup STM32F4xx_System_Private_Functions
|
|
|
|
* @{
|
|
|
|
*/
|
|
|
|
|
|
|
|
/**
|
|
|
|
* @brief Setup the microcontroller system
|
|
|
|
* Initialize the Embedded Flash Interface, the PLL and update the
|
|
|
|
* SystemFrequency variable.
|
|
|
|
* @param None
|
|
|
|
* @retval None
|
|
|
|
*/
|
|
|
|
void SystemInit(void)
|
|
|
|
{
|
|
|
|
/* FPU settings ------------------------------------------------------------*/
|
|
|
|
#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
|
|
|
|
SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
|
|
|
|
#endif
|
|
|
|
/* Reset the RCC clock configuration to the default reset state ------------*/
|
|
|
|
/* Set HSION bit */
|
|
|
|
RCC->CR |= (uint32_t)0x00000001;
|
|
|
|
|
|
|
|
/* Reset CFGR register */
|
|
|
|
RCC->CFGR = 0x00000000;
|
|
|
|
|
|
|
|
/* Reset HSEON, CSSON and PLLON bits */
|
|
|
|
RCC->CR &= (uint32_t)0xFEF6FFFF;
|
|
|
|
|
|
|
|
/* Reset PLLCFGR register */
|
|
|
|
RCC->PLLCFGR = 0x24003010;
|
|
|
|
|
|
|
|
/* Reset HSEBYP bit */
|
|
|
|
RCC->CR &= (uint32_t)0xFFFBFFFF;
|
|
|
|
|
|
|
|
/* Disable all interrupts */
|
|
|
|
RCC->CIR = 0x00000000;
|
|
|
|
|
|
|
|
#ifdef DATA_IN_ExtSRAM
|
|
|
|
SystemInit_ExtMemCtl();
|
|
|
|
#endif /* DATA_IN_ExtSRAM */
|
|
|
|
|
|
|
|
/* Configure the System clock source, PLL Multiplier and Divider factors,
|
|
|
|
AHB/APBx prescalers and Flash settings ----------------------------------*/
|
|
|
|
SetSysClock();
|
|
|
|
|
|
|
|
/* Configure the Vector Table location add offset address ------------------*/
|
|
|
|
#ifdef VECT_TAB_SRAM
|
|
|
|
SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
|
|
|
|
#else
|
|
|
|
SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* @brief Update SystemCoreClock variable according to Clock Register Values.
|
|
|
|
* The SystemCoreClock variable contains the core clock (HCLK), it can
|
|
|
|
* be used by the user application to setup the SysTick timer or configure
|
|
|
|
* other parameters.
|
|
|
|
*
|
|
|
|
* @note Each time the core clock (HCLK) changes, this function must be called
|
|
|
|
* to update SystemCoreClock variable value. Otherwise, any configuration
|
|
|
|
* based on this variable will be incorrect.
|
|
|
|
*
|
|
|
|
* @note - The system frequency computed by this function is not the real
|
|
|
|
* frequency in the chip. It is calculated based on the predefined
|
|
|
|
* constant and the selected clock source:
|
|
|
|
*
|
|
|
|
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
|
|
|
|
*
|
|
|
|
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
|
|
|
|
*
|
|
|
|
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
|
|
|
|
* or HSI_VALUE(*) multiplied/divided by the PLL factors.
|
|
|
|
*
|
|
|
|
* (*) HSI_VALUE is a constant defined in stm32f4xx.h file (default value
|
|
|
|
* 16 MHz) but the real value may vary depending on the variations
|
|
|
|
* in voltage and temperature.
|
|
|
|
*
|
|
|
|
* (**) HSE_VALUE is a constant defined in stm32f4xx.h file (default value
|
|
|
|
* 25 MHz), user has to ensure that HSE_VALUE is same as the real
|
|
|
|
* frequency of the crystal used. Otherwise, this function may
|
|
|
|
* have wrong result.
|
|
|
|
*
|
|
|
|
* - The result of this function could be not correct when using fractional
|
|
|
|
* value for HSE crystal.
|
|
|
|
*
|
|
|
|
* @param None
|
|
|
|
* @retval None
|
|
|
|
*/
|
|
|
|
void SystemCoreClockUpdate(void)
|
|
|
|
{
|
|
|
|
uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
|
|
|
|
|
|
|
|
/* Get SYSCLK source -------------------------------------------------------*/
|
|
|
|
tmp = RCC->CFGR & RCC_CFGR_SWS;
|
|
|
|
|
|
|
|
switch (tmp)
|
|
|
|
{
|
|
|
|
case 0x00: /* HSI used as system clock source */
|
|
|
|
SystemCoreClock = HSI_VALUE;
|
|
|
|
break;
|
|
|
|
case 0x04: /* HSE used as system clock source */
|
|
|
|
SystemCoreClock = HSE_VALUE;
|
|
|
|
break;
|
|
|
|
case 0x08: /* PLL used as system clock source */
|
|
|
|
|
|
|
|
/* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
|
|
|
|
SYSCLK = PLL_VCO / PLL_P
|
|
|
|
*/
|
|
|
|
pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
|
|
|
|
pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
|
|
|
|
|
|
|
|
if (pllsource != 0)
|
|
|
|
{
|
|
|
|
/* HSE used as PLL clock source */
|
|
|
|
pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
/* HSI used as PLL clock source */
|
|
|
|
pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
|
|
|
|
}
|
|
|
|
|
|
|
|
pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
|
|
|
|
SystemCoreClock = pllvco/pllp;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
SystemCoreClock = HSI_VALUE;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
/* Compute HCLK frequency --------------------------------------------------*/
|
|
|
|
/* Get HCLK prescaler */
|
|
|
|
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
|
|
|
|
/* HCLK frequency */
|
|
|
|
SystemCoreClock >>= tmp;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* @brief Configures the System clock source, PLL Multiplier and Divider factors,
|
|
|
|
* AHB/APBx prescalers and Flash settings
|
|
|
|
* @Note This function should be called only once the RCC clock configuration
|
|
|
|
* is reset to the default reset state (done in SystemInit() function).
|
|
|
|
* @param None
|
|
|
|
* @retval None
|
|
|
|
*/
|
|
|
|
static void SetSysClock(void)
|
|
|
|
{
|
|
|
|
/******************************************************************************/
|
|
|
|
/* PLL (clocked by HSE) used as System clock source */
|
|
|
|
/******************************************************************************/
|
|
|
|
__IO uint32_t StartUpCounter = 0, HSEStatus = 0;
|
|
|
|
|
|
|
|
/* Enable HSE */
|
|
|
|
RCC->CR |= ((uint32_t)RCC_CR_HSEON);
|
|
|
|
|
|
|
|
/* Wait till HSE is ready and if Time out is reached exit */
|
|
|
|
do
|
|
|
|
{
|
|
|
|
HSEStatus = RCC->CR & RCC_CR_HSERDY;
|
|
|
|
StartUpCounter++;
|
|
|
|
} while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
|
|
|
|
|
|
|
|
if ((RCC->CR & RCC_CR_HSERDY) != RESET)
|
|
|
|
{
|
|
|
|
HSEStatus = (uint32_t)0x01;
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
HSEStatus = (uint32_t)0x00;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (HSEStatus == (uint32_t)0x01)
|
|
|
|
{
|
|
|
|
/* Select regulator voltage output Scale 1 mode, System frequency up to 168 MHz */
|
|
|
|
RCC->APB1ENR |= RCC_APB1ENR_PWREN;
|
|
|
|
PWR->CR |= PWR_CR_VOS;
|
|
|
|
|
|
|
|
/* HCLK = SYSCLK / 1*/
|
|
|
|
RCC->CFGR |= RCC_CFGR_HPRE_DIV1;
|
|
|
|
|
|
|
|
/* PCLK2 = HCLK / 2*/
|
|
|
|
RCC->CFGR |= RCC_CFGR_PPRE2_DIV2;
|
|
|
|
|
|
|
|
/* PCLK1 = HCLK / 4*/
|
|
|
|
RCC->CFGR |= RCC_CFGR_PPRE1_DIV4;
|
|
|
|
|
|
|
|
/* Configure the main PLL */
|
|
|
|
RCC->PLLCFGR = PLL_M | (PLL_N << 6) | (((PLL_P >> 1) -1) << 16) |
|
|
|
|
(RCC_PLLCFGR_PLLSRC_HSE) | (PLL_Q << 24);
|
|
|
|
|
|
|
|
/* Enable the main PLL */
|
|
|
|
RCC->CR |= RCC_CR_PLLON;
|
|
|
|
|
|
|
|
/* Wait till the main PLL is ready */
|
|
|
|
while((RCC->CR & RCC_CR_PLLRDY) == 0)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Configure Flash prefetch, Instruction cache, Data cache and wait state */
|
|
|
|
FLASH->ACR = FLASH_ACR_ICEN |FLASH_ACR_DCEN |FLASH_ACR_LATENCY_5WS;
|
|
|
|
|
|
|
|
/* Select the main PLL as system clock source */
|
|
|
|
RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
|
|
|
|
RCC->CFGR |= RCC_CFGR_SW_PLL;
|
|
|
|
|
|
|
|
/* Wait till the main PLL is used as system clock source */
|
|
|
|
while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS ) != RCC_CFGR_SWS_PLL);
|
|
|
|
{
|
|
|
|
}
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{ /* If HSE fails to start-up, the application will have wrong clock
|
|
|
|
configuration. User can add here some code to deal with this error */
|
|
|
|
}
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* @brief Setup the external memory controller. Called in startup_stm32f4xx.s
|
|
|
|
* before jump to __main
|
|
|
|
* @param None
|
|
|
|
* @retval None
|
|
|
|
*/
|
|
|
|
#ifdef DATA_IN_ExtSRAM
|
|
|
|
/**
|
|
|
|
* @brief Setup the external memory controller.
|
|
|
|
* Called in startup_stm32f4xx.s before jump to main.
|
|
|
|
* This function configures the external SRAM mounted on STM324xG_EVAL board
|
|
|
|
* This SRAM will be used as program data memory (including heap and stack).
|
|
|
|
* @param None
|
|
|
|
* @retval None
|
|
|
|
*/
|
|
|
|
void SystemInit_ExtMemCtl(void)
|
|
|
|
{
|
|
|
|
/*-- GPIOs Configuration -----------------------------------------------------*/
|
|
|
|
/*
|
|
|
|
+-------------------+--------------------+------------------+------------------+
|
|
|
|
+ SRAM pins assignment +
|
|
|
|
+-------------------+--------------------+------------------+------------------+
|
|
|
|
| PD0 <-> FSMC_D2 | PE0 <-> FSMC_NBL0 | PF0 <-> FSMC_A0 | PG0 <-> FSMC_A10 |
|
|
|
|
| PD1 <-> FSMC_D3 | PE1 <-> FSMC_NBL1 | PF1 <-> FSMC_A1 | PG1 <-> FSMC_A11 |
|
|
|
|
| PD4 <-> FSMC_NOE | PE3 <-> FSMC_A19 | PF2 <-> FSMC_A2 | PG2 <-> FSMC_A12 |
|
|
|
|
| PD5 <-> FSMC_NWE | PE4 <-> FSMC_A20 | PF3 <-> FSMC_A3 | PG3 <-> FSMC_A13 |
|
|
|
|
| PD8 <-> FSMC_D13 | PE7 <-> FSMC_D4 | PF4 <-> FSMC_A4 | PG4 <-> FSMC_A14 |
|
|
|
|
| PD9 <-> FSMC_D14 | PE8 <-> FSMC_D5 | PF5 <-> FSMC_A5 | PG5 <-> FSMC_A15 |
|
|
|
|
| PD10 <-> FSMC_D15 | PE9 <-> FSMC_D6 | PF12 <-> FSMC_A6 | PG9 <-> FSMC_NE2 |
|
|
|
|
| PD11 <-> FSMC_A16 | PE10 <-> FSMC_D7 | PF13 <-> FSMC_A7 |------------------+
|
|
|
|
| PD12 <-> FSMC_A17 | PE11 <-> FSMC_D8 | PF14 <-> FSMC_A8 |
|
|
|
|
| PD13 <-> FSMC_A18 | PE12 <-> FSMC_D9 | PF15 <-> FSMC_A9 |
|
|
|
|
| PD14 <-> FSMC_D0 | PE13 <-> FSMC_D10 |------------------+
|
|
|
|
| PD15 <-> FSMC_D1 | PE14 <-> FSMC_D11 |
|
|
|
|
| | PE15 <-> FSMC_D12 |
|
|
|
|
+-------------------+--------------------+
|
|
|
|
*/
|
|
|
|
/* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
|
|
|
|
RCC->AHB1ENR = 0x00000078;
|
|
|
|
|
|
|
|
/* Connect PDx pins to FSMC Alternate function */
|
|
|
|
GPIOD->AFR[0] = 0x00cc00cc;
|
|
|
|
GPIOD->AFR[1] = 0xcc0ccccc;
|
|
|
|
/* Configure PDx pins in Alternate function mode */
|
|
|
|
GPIOD->MODER = 0xaaaa0a0a;
|
|
|
|
/* Configure PDx pins speed to 100 MHz */
|
|
|
|
GPIOD->OSPEEDR = 0xffff0f0f;
|
|
|
|
/* Configure PDx pins Output type to push-pull */
|
|
|
|
GPIOD->OTYPER = 0x00000000;
|
|
|
|
/* No pull-up, pull-down for PDx pins */
|
|
|
|
GPIOD->PUPDR = 0x00000000;
|
|
|
|
|
|
|
|
/* Connect PEx pins to FSMC Alternate function */
|
|
|
|
GPIOE->AFR[0] = 0xc00cc0cc;
|
|
|
|
GPIOE->AFR[1] = 0xcccccccc;
|
|
|
|
/* Configure PEx pins in Alternate function mode */
|
|
|
|
GPIOE->MODER = 0xaaaa828a;
|
|
|
|
/* Configure PEx pins speed to 100 MHz */
|
|
|
|
GPIOE->OSPEEDR = 0xffffc3cf;
|
|
|
|
/* Configure PEx pins Output type to push-pull */
|
|
|
|
GPIOE->OTYPER = 0x00000000;
|
|
|
|
/* No pull-up, pull-down for PEx pins */
|
|
|
|
GPIOE->PUPDR = 0x00000000;
|
|
|
|
|
|
|
|
/* Connect PFx pins to FSMC Alternate function */
|
|
|
|
GPIOF->AFR[0] = 0x00cccccc;
|
|
|
|
GPIOF->AFR[1] = 0xcccc0000;
|
|
|
|
/* Configure PFx pins in Alternate function mode */
|
|
|
|
GPIOF->MODER = 0xaa000aaa;
|
|
|
|
/* Configure PFx pins speed to 100 MHz */
|
|
|
|
GPIOF->OSPEEDR = 0xff000fff;
|
|
|
|
/* Configure PFx pins Output type to push-pull */
|
|
|
|
GPIOF->OTYPER = 0x00000000;
|
|
|
|
/* No pull-up, pull-down for PFx pins */
|
|
|
|
GPIOF->PUPDR = 0x00000000;
|
|
|
|
|
|
|
|
/* Connect PGx pins to FSMC Alternate function */
|
|
|
|
GPIOG->AFR[0] = 0x00cccccc;
|
|
|
|
GPIOG->AFR[1] = 0x000000c0;
|
|
|
|
/* Configure PGx pins in Alternate function mode */
|
|
|
|
GPIOG->MODER = 0x00080aaa;
|
|
|
|
/* Configure PGx pins speed to 100 MHz */
|
|
|
|
GPIOG->OSPEEDR = 0x000c0fff;
|
|
|
|
/* Configure PGx pins Output type to push-pull */
|
|
|
|
GPIOG->OTYPER = 0x00000000;
|
|
|
|
/* No pull-up, pull-down for PGx pins */
|
|
|
|
GPIOG->PUPDR = 0x00000000;
|
|
|
|
|
|
|
|
/*-- FSMC Configuration ------------------------------------------------------*/
|
|
|
|
/* Enable the FSMC interface clock */
|
|
|
|
RCC->AHB3ENR = 0x00000001;
|
|
|
|
|
|
|
|
/* Configure and enable Bank1_SRAM2 */
|
|
|
|
FSMC_Bank1->BTCR[2] = 0x00001015;
|
|
|
|
FSMC_Bank1->BTCR[3] = 0x00010603;
|
|
|
|
FSMC_Bank1E->BWTR[2] = 0x0fffffff;
|
|
|
|
/*
|
|
|
|
Bank1_SRAM2 is configured as follow:
|
|
|
|
|
|
|
|
p.FSMC_AddressSetupTime = 3;
|
|
|
|
p.FSMC_AddressHoldTime = 0;
|
|
|
|
p.FSMC_DataSetupTime = 6;
|
|
|
|
p.FSMC_BusTurnAroundDuration = 1;
|
|
|
|
p.FSMC_CLKDivision = 0;
|
|
|
|
p.FSMC_DataLatency = 0;
|
|
|
|
p.FSMC_AccessMode = FSMC_AccessMode_A;
|
|
|
|
|
|
|
|
FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM2;
|
|
|
|
FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable;
|
|
|
|
FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_PSRAM;
|
|
|
|
FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b;
|
|
|
|
FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable;
|
|
|
|
FSMC_NORSRAMInitStructure.FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable;
|
|
|
|
FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
|
|
|
|
FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable;
|
|
|
|
FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;
|
|
|
|
FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable;
|
|
|
|
FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable;
|
|
|
|
FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable;
|
|
|
|
FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable;
|
|
|
|
FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &p;
|
|
|
|
FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &p;
|
|
|
|
*/
|
|
|
|
}
|
|
|
|
#endif /* DATA_IN_ExtSRAM */
|
|
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
* @}
|
|
|
|
*/
|
|
|
|
|
|
|
|
/**
|
|
|
|
* @}
|
|
|
|
*/
|
|
|
|
|
|
|
|
/**
|
|
|
|
* @}
|
|
|
|
*/
|
|
|
|
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
|
|
|
|
|