Start implementation of PT1000 ADC measurement

stm-firmware/adc-meas.c

@@ -1,2 +1,123 @@
 #include <adc-meas.h>
+#include <stm32f4xx.h>
+#include <stm32-gpio-macros.h>
 
+static float pt1000_offset;
+static float pt1000_sens_dev;
+static bool calibration_active;
+static float filter_alpha;
+static float pt1000_adc_raw_lf;
+static bool streaming_active;
+static volatile bool filter_ready;
+static volatile enum adc_p1000_error pt1000_error;
+
+
+#define ADC_TO_RES(adc) ((float)(adc) / 4096.0f * 2500.0f)
+
+void adc_pt1000_setup_meas()
+{
+	RCC->APB2ENR |= RCC_APB2ENR_ADC1EN;
+	RCC->AHB1ENR |= ADC_PT1000_PORT_RCC_MASK;
+	ADC_PT1000_PORT->MODER |= ANALOG(ADC_PT1000_PIN);
+
+}
+
+void adc_pt1000_set_moving_average_filter_param(float alpha)
+{
+	filter_alpha = alpha;
+}
+
+void adc_pt1000_set_resistance_calibration(float offset, float sensitivity_deviation, bool active)
+{
+	pt1000_offset = offset;
+	pt1000_sens_dev = sensitivity_deviation;
+	calibration_active = active;
+}
+
+void adc_pt1000_get_resistance_calibration(float *offset, float *sensitivity_deviation, bool *active)
+{
+	if (!offset || !sensitivity_deviation || !active)
+		return;
+
+	*offset = pt1000_offset;
+	*sensitivity_deviation = pt1000_sens_dev;
+	*active = calibration_active;
+}
+
+int adc_pt1000_get_current_resistance(float *resistance)
+{
+	int ret_val = 0;
+
+	if (!resistance)
+		return -1001;
+
+	if (calibration_active)
+		*resistance = ADC_TO_RES(pt1000_adc_raw_lf) * (1 + pt1000_sens_dev) + pt1000_offset;
+	else
+		*resistance = ADC_TO_RES(pt1000_adc_raw_lf);
+
+	if (adc_pt1000_check_error()) {
+		ret_val = -100;
+		goto return_value;
+	}
+
+	if (streaming_active) {
+		ret_val = 1;
+		goto return_value;
+	}
+	if (!filter_ready)
+	{
+		ret_val = 2;
+	}
+
+return_value:
+	return ret_val;
+}
+
+int adc_pt1000_stream_raw_value_to_memory(uint16_t *adc_array, uint32_t length, volatile uint8_t *flag_to_set)
+{
+
+}
+
+void adc_pt1000_convert_raw_value_array_to_resistance(float *resistance_dest, uint16_t *raw_source, uint32_t count)
+{
+
+}
+
+enum adc_p1000_error adc_pt1000_check_error()
+{
+	return pt1000_error;
+}
+
+void adc_pt1000_clear_error()
+{
+	pt1000_error = ADC_PT1000_NO_ERR;
+}
+
+static void adc_pt1000_filter(uint16_t adc_value)
+{
+	pt1000_adc_raw_lf = (1-filter_alpha) * pt1000_adc_raw_lf + filter_alpha * (float)adc_value;
+}
+
+void ADC_IRQHandler(void)
+{
+	uint32_t adc1_sr;
+
+	adc1_sr = ADC1->SR;
+	if (ADC1->SR & ADC_SR_EOC) {
+		ADC1->SR &= ~ADC_SR_EOC;
+		adc_pt1000_filter(ADC1->DR);
+	}
+
+	if (adc1_sr & ADC_SR_OVR) {
+		ADC1->SR &= ~ADC_SR_OVR;
+		pt1000_error = ADC_PT1000_OVERFLOW;
+		/* Disable ADC  in case of overrrun*/
+		ADC1->CR2 &= ADC_CR2_ADON;
+	}
+
+	if (adc1_sr & ADC_SR_AWD) {
+		ADC1->SR &= ~ADC_SR_AWD;
+		pt1000_error = ADC_PT1000_WATCHDOG_ERROR;
+	}
+}