mhu/reflow-oven-control-sw
2
0
Fork 0
Code Issues 4 Pull Requests Releases 4 Wiki Activity

Merge branch 'dev' into ui

Browse Source
This commit is contained in:
Mario Hüttel
2020-02-25 19:49:14 +01:00
parent 49835d9213 a39fe09de4
commit 4487f854cd
11 changed files with 106 additions and 193 deletions
Download Patch File Download Diff File Expand all files Collapse all files

34
stm-firmware/include/reflow-controller/onewire-if.h
View File

@@ -1,34 +0,0 @@
/* Reflow Oven Controller
*
* Copyright (C) 2020 Mario Hüttel <mario.huettel@gmx.net>
*
* This file is part of the Reflow Oven Controller Project.
*
* The reflow oven controller is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* The Reflow Oven Control Firmware is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with the reflow oven controller project.
* If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __ONEWIRE_IF_H__
#define __ONEWIRE_IF_H__
#include <stm-periph/uart.h>
int onewire_if_init_uart(struct stm_uart *uart, uint32_t brr_val, USART_TypeDef *onewire_uart, volatile uint32_t *rcc_reg, uint8_t rcc_bit_num);
void onewire_if_disable(struct stm_uart *uart);
int onewire_if_send_byte(struct stm_uart *uart);
int onewire_if_receive_byte(struct stm_uart *uart);
#endif /* __ONEWIRE_IF_H__ */

47
stm-firmware/include/reflow-controller/onewire-temp-sensors.h
View File

@@ -1,47 +0,0 @@
/* Reflow Oven Controller
*
* Copyright (C) 2020 Mario Hüttel <mario.huettel@gmx.net>
*
* This file is part of the Reflow Oven Controller Project.
*
* The reflow oven controller is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* The Reflow Oven Control Firmware is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with the reflow oven controller project.
* If not, see <http://www.gnu.org/licenses/>.
*/
#include <stddef.h>
#include <stdint.h>
#ifndef __ONEWIRE_TEMP_SENSORS_H__
#define __ONEWIRE_TEMP_SENSORS_H__
#define ONEWIRE_TEMP_PORT GPIOB
#define ONEWIRE_TEMP_RCC_MASK RCC_AHB1ENR_GPIOBEN
#define ONEWIRE_TEMP_TX_PIN 10U
#define ONEWIRE_TEMP_RX_PIN 11U
#define ONEWIRE_TEMP_AF_NUM 7U
#define ONEWIRE_UART_DEV USART3
void onewire_temp_sensors_setup_hw();
/**
* @brief onewire_temp_sensors_discover
* @param id_list
* @param list_len
* @return Negative: error, >= 0: amount of discovered sensors
*/
int onewire_temp_sensors_discover(uint32_t *id_list, size_t list_len);
float onewire_temp_sensor_read_temp(uint32_t id);
#endif /* __ONEWIRE_TEMP_SENSORS_H__ */

1
stm-firmware/include/reflow-controller/systick.h
View File

@@ -63,5 +63,6 @@ void systick_setup(void);
*/
void systick_wait_ms(uint32_t ms);
uint64_t systick_get_global_tick();
#endif /* __SYSTICK_H__ */