diff --git a/stm-firmware/reflow-oven-controller.jdebug b/stm-firmware/reflow-oven-controller.jdebug deleted file mode 100644 index 1876849..0000000 --- a/stm-firmware/reflow-oven-controller.jdebug +++ /dev/null @@ -1,287 +0,0 @@ -/********************************************************************* -* (c) SEGGER Microcontroller GmbH * -* The Embedded Experts * -* www.segger.com * -********************************************************************** - -File : -Created : 26 Jan 2020 15:46 -Ozone Version : V2.70 -*/ - -/********************************************************************* -* -* OnProjectLoad -* -* Function description -* Project load routine. Required. -* -********************************************************************** -*/ -void OnProjectLoad (void) { - // - // Dialog-generated settings - // - Project.AddPathSubstitute ("/home/mari/projects/arm/reflow-oven-controller", "$(ProjectDir)"); - Project.AddPathSubstitute ("/home/mari/projects/arm/reflow-oven-controller", "$(ProjectDir)"); - Project.SetDevice ("STM32F407VE"); - Project.SetHostIF ("USB", ""); - Project.SetTargetIF ("SWD"); - Project.SetTIFSpeed ("4 MHz"); - Project.AddSvdFile ("$(InstallDir)/Config/CPU/Cortex-M4F.svd"); - Project.AddSvdFile ("/home/mari/Downloads/STM32F407.svd"); - // - // User settings - // - File.Open ("$(ProjectDir)/reflow-controller.elf"); -} - -/********************************************************************* -* -* OnSnapshotLoad -* -* Function description -* Optional event handler, called upon loading a snapshot. -* -* Additional information -* This function is used to restore the target state in cases -* where values cannot simply be written to the target. -* Typical use: GPIO clock needs to be enabled, before -* GPIO is configured. -* -********************************************************************** -*/ -//void OnSnapshotLoad (void) { -//} - -/********************************************************************* -* -* OnSnapshotSave -* -* Function description -* Optional event handler, called upon saving a snapshot. -* -* Additional information -* This function is usually used to save values of the target -* state which can either not be trivially read, -* or need to be restored in a specific way or order. -* Typically use: Memory Mapped Registers, -* such as PLL and GPIO configuration. -* -********************************************************************** -*/ -//void OnSnapshotSave (void) { -//} - -/********************************************************************* -* -* TargetReset -* -* Function description -* Replaces the default target device reset routine. Optional. -* -* Notes -* This example demonstrates the usage when -* debugging a RAM program on a Cortex-M target device -* -********************************************************************** -*/ -//void TargetReset (void) { -// -// unsigned int SP; -// unsigned int PC; -// unsigned int VectorTableAddr; -// -// Exec.Reset(); -// -// VectorTableAddr = Elf.GetBaseAddr(); -// -// if (VectorTableAddr != 0xFFFFFFFF) { -// -// Util.Log("Resetting Program."); -// -// SP = Target.ReadU32(VectorTableAddr); -// Target.SetReg("SP", SP); -// -// PC = Target.ReadU32(VectorTableAddr + 4); -// Target.SetReg("PC", PC); -// } -//} - -/********************************************************************* -* -* BeforeTargetReset -* -* Function description -* Event handler routine. Optional. -* -********************************************************************** -*/ -//void BeforeTargetReset (void) { -//} - -/********************************************************************* -* -* AfterTargetReset -* -* Function description -* Event handler routine. -* - Sets the PC register to program reset value. -* - Sets the SP register to program reset value on Cortex-M. -* -********************************************************************** -*/ -void AfterTargetReset (void) { - unsigned int SP; - unsigned int PC; - unsigned int VectorTableAddr; - - VectorTableAddr = Elf.GetBaseAddr(); - - if (VectorTableAddr == 0xFFFFFFFF) { - Util.Log("Project file error: failed to get program base"); - } else { - SP = Target.ReadU32(VectorTableAddr); - Target.SetReg("SP", SP); - - PC = Target.ReadU32(VectorTableAddr + 4); - Target.SetReg("PC", PC); - } -} - -/********************************************************************* -* -* DebugStart -* -* Function description -* Replaces the default debug session startup routine. Optional. -* -********************************************************************** -*/ -//void DebugStart (void) { -//} - -/********************************************************************* -* -* TargetConnect -* -* Function description -* Replaces the default target IF connection routine. Optional. -* -********************************************************************** -*/ -//void TargetConnect (void) { -//} - -/********************************************************************* -* -* BeforeTargetConnect -* -* Function description -* Event handler routine. Optional. -* -********************************************************************** -*/ -//void BeforeTargetConnect (void) { -//} - -/********************************************************************* -* -* AfterTargetConnect -* -* Function description -* Event handler routine. Optional. -* -********************************************************************** -*/ -//void AfterTargetConnect (void) { -//} - -/********************************************************************* -* -* TargetDownload -* -* Function description -* Replaces the default program download routine. Optional. -* -********************************************************************** -*/ -//void TargetDownload (void) { -//} - -/********************************************************************* -* -* BeforeTargetDownload -* -* Function description -* Event handler routine. Optional. -* -********************************************************************** -*/ -//void BeforeTargetDownload (void) { -//} - -/********************************************************************* -* -* AfterTargetDownload -* -* Function description -* Event handler routine. -* - Sets the PC register to program reset value. -* - Sets the SP register to program reset value on Cortex-M. -* -********************************************************************** -*/ -void AfterTargetDownload (void) { - unsigned int SP; - unsigned int PC; - unsigned int VectorTableAddr; - - VectorTableAddr = Elf.GetBaseAddr(); - - if (VectorTableAddr == 0xFFFFFFFF) { - Util.Log("Project file error: failed to get program base"); - } else { - SP = Target.ReadU32(VectorTableAddr); - Target.SetReg("SP", SP); - - PC = Target.ReadU32(VectorTableAddr + 4); - Target.SetReg("PC", PC); - } -} - -/********************************************************************* -* -* BeforeTargetDisconnect -* -* Function description -* Event handler routine. Optional. -* -********************************************************************** -*/ -//void BeforeTargetDisconnect (void) { -//} - -/********************************************************************* -* -* AfterTargetDisconnect -* -* Function description -* Event handler routine. Optional. -* -********************************************************************** -*/ -//void AfterTargetDisconnect (void) { -//} - -/********************************************************************* -* -* AfterTargetHalt -* -* Function description -* Event handler routine. Optional. -* -********************************************************************** -*/ -//void AfterTargetHalt (void) { -//}