Improve doxygen comments in code.

This commit is contained in:
Mario Hüttel 2021-10-11 19:45:13 +02:00
parent c82ca7d8f0
commit 6fde4cfd66
9 changed files with 298 additions and 19 deletions

View File

@ -18,6 +18,11 @@
* If not, see <http://www.gnu.org/licenses/>. * If not, see <http://www.gnu.org/licenses/>.
*/ */
/**
* @addtogroup digio
* @{
*/
#include <reflow-controller/digio.h> #include <reflow-controller/digio.h>
#include <stm32/stm32f4xx.h> #include <stm32/stm32f4xx.h>
#include <stm-periph/rcc-manager.h> #include <stm-periph/rcc-manager.h>
@ -119,7 +124,12 @@ int led_get(uint8_t num)
return ((LED_PORT->ODR & (1<<led_pins[num])) ? 1 : 0); return ((LED_PORT->ODR & (1<<led_pins[num])) ? 1 : 0);
} }
/**
* @brief Initialize the timer for the beeper to generate the output frequency
*
* TIM7 is used as the frequency generating timer. If @ref LOUDSPEAKER_MULTIFREQ
* is 0, the timer is unused and this function does nothing.
*/
static void loudspeaker_freq_timer_init(void) static void loudspeaker_freq_timer_init(void)
{ {
#if LOUDSPEAKER_MULTIFREQ #if LOUDSPEAKER_MULTIFREQ
@ -143,6 +153,13 @@ void loudspeaker_setup(void)
loudspeaker_set(0U); loudspeaker_set(0U);
} }
/**
* @brief Start the beeper
* @param val frequency value of the speaker in 'Timer relaod values'
* @note If @ref LOUDSPEAKER_MULTIFREQ isn't set,
* the speaker output will be set to high and no frequency is generated.
* The value of @p val is ignored in this case
*/
static void loudspeaker_start_beep(uint16_t val) static void loudspeaker_start_beep(uint16_t val)
{ {
#if LOUDSPEAKER_MULTIFREQ #if LOUDSPEAKER_MULTIFREQ
@ -155,6 +172,9 @@ static void loudspeaker_start_beep(uint16_t val)
#endif #endif
} }
/**
* @brief Stop the beeping of the loudspeaker
*/
static void loudspeaker_stop_beep(void) static void loudspeaker_stop_beep(void)
{ {
#if LOUDSPEAKER_MULTIFREQ #if LOUDSPEAKER_MULTIFREQ
@ -184,6 +204,12 @@ uint16_t loudspeaker_get(void)
} }
#if LOUDSPEAKER_MULTIFREQ #if LOUDSPEAKER_MULTIFREQ
/**
* @brief Timer7 IRQ Handler
*
* This IRQ Handler is used by the loudspeaker to synthesize the output frequency.
* If @ref LOUDSPEAKER_MULTIFREQ is 0, TIM7 and this interrupt will not be used.
*/
void TIM7_IRQHandler(void) void TIM7_IRQHandler(void)
{ {
TIM7->SR = 0UL; TIM7->SR = 0UL;
@ -191,3 +217,5 @@ void TIM7_IRQHandler(void)
LOUDSPEAKER_PORT->ODR ^= (1<<LOUDSPEAKER_PIN); LOUDSPEAKER_PORT->ODR ^= (1<<LOUDSPEAKER_PIN);
} }
#endif #endif
/** @} */

View File

@ -463,7 +463,7 @@ LOOKUP_CACHE_SIZE = 0
# DOT_NUM_THREADS setting. # DOT_NUM_THREADS setting.
# Minimum value: 0, maximum value: 32, default value: 1. # Minimum value: 0, maximum value: 32, default value: 1.
NUM_PROC_THREADS = 1 NUM_PROC_THREADS = 0
#--------------------------------------------------------------------------- #---------------------------------------------------------------------------
# Build related configuration options # Build related configuration options
@ -968,7 +968,8 @@ EXCLUDE = ../include/stm32 \
../linklist-lib/test \ ../linklist-lib/test \
../base64-lib/test \ ../base64-lib/test \
../shellmatta/doc/main.dox \ ../shellmatta/doc/main.dox \
../updater/ram-code ../updater/ram-code \
./
# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
# directories that are symbolic links (a Unix file system feature) are excluded # directories that are symbolic links (a Unix file system feature) are excluded

View File

@ -146,7 +146,7 @@ int led_get(uint8_t num);
#define LOUDSPEAKER_PIN 1 #define LOUDSPEAKER_PIN 1
/** /**
* @brief The loudpseaker requires a frequncy signal instead of a simple on/off signal. * @brief The loudpseaker requires a frequency signal instead of a simple on/off signal.
*/ */
#define LOUDSPEAKER_MULTIFREQ 1 #define LOUDSPEAKER_MULTIFREQ 1
@ -162,7 +162,14 @@ void loudspeaker_setup(void);
/** /**
* @brief Set the loudspeaker value * @brief Set the loudspeaker value
* @param val Value *
* Zero turns off the beeper. 1 is a special value
* and will set the @ref LOUDSPEAKER_MULTIFREQ_DEFAULT value.
*
* If @ref LOUDSPEAKER_MULTIFREQ is 0, then no actual frequency is produced.
* Instead any @p val unequal to zero turns the output pin high and 0 will turn it low.
*
* @param val Value.
*/ */
void loudspeaker_set(uint16_t val); void loudspeaker_set(uint16_t val);

View File

@ -18,15 +18,34 @@
* If not, see <http://www.gnu.org/licenses/>. * If not, see <http://www.gnu.org/licenses/>.
*/ */
/**
* @defgroup main-cycle-counter Main Cycle Counter
* The main cycle counter is incremented after every loop run of the main loop in main.c
* @{
*/
#ifndef __MAIN_CYCLE_COUNTER_H__ #ifndef __MAIN_CYCLE_COUNTER_H__
#define __MAIN_CYCLE_COUNTER_H__ #define __MAIN_CYCLE_COUNTER_H__
#include <stdint.h> #include <stdint.h>
/**
* @brief Initialize/Reset the main cycle counter to 0.
* This function can be called multiple times.
*/
void main_cycle_counter_init(void); void main_cycle_counter_init(void);
/**
* @brief Increment the main cycle counter by 1
*/
void main_cycle_counter_inc(void); void main_cycle_counter_inc(void);
/**
* @brief Get the current main cycle counter value
* @return Value
*/
uint64_t main_cycle_counter_get(void); uint64_t main_cycle_counter_get(void);
#endif /* __MAIN_CYCLE_COUNTER_H__ */ #endif /* __MAIN_CYCLE_COUNTER_H__ */
/** @} */

View File

@ -21,32 +21,93 @@
#ifndef __OVEN_DRIVER_H__ #ifndef __OVEN_DRIVER_H__
#define __OVEN_DRIVER_H__ #define __OVEN_DRIVER_H__
/**
* @defgroup oven-driver Oven SSR Driver and PID Controller
* @{
*/
#include <stdint.h> #include <stdint.h>
#include <stdbool.h> #include <stdbool.h>
#include <reflow-controller/pid-controller.h> #include <reflow-controller/pid-controller.h>
enum oven_pid_status {OVEN_PID_DEACTIVATED, /**
OVEN_PID_RUNNING, * @brief Status of the PID controlling the oven
OVEN_PID_ABORTED}; */
enum oven_pid_status {
OVEN_PID_DEACTIVATED, /**< @brief The PID of the oven is deactivated. */
OVEN_PID_RUNNING, /**< @brief The PID of the oven is currently active and running. */
OVEN_PID_ABORTED, /**< @brief The PID of the oven has been aborted due to an error and is not running. */
};
/**
* @brief Initialize the oven driver.
*
* This will initialize the Timer for the PWM output to the SSR.
* If the hardware revision is >= v1.3 the SSR safety enable line will also be initialized.
*/
void oven_driver_init(void); void oven_driver_init(void);
/**
* @brief Set a power level on the oven control output
* @param power Power level between 0 to 100
* @note This will not actually set the output. For this, @ref oven_driver_apply_power_level() has to be called.
* It will be called in the main loop.
*/
void oven_driver_set_power(uint8_t power); void oven_driver_set_power(uint8_t power);
/**
* @brief Disable the oven driver.
*
* This shuts down the oven driver timer and the corresponding clocks.
*/
void oven_driver_disable(void); void oven_driver_disable(void);
/**
* @brief Initialize the PID controller for the oven output
* @param PID controller holding the settings
*/
void oven_pid_init(struct pid_controller *controller_to_copy); void oven_pid_init(struct pid_controller *controller_to_copy);
/**
* @brief Handle the PID controller.
* This must be called cyclically. When the sampling period has passed, the function will process the PT1000
* resistance and do a PID cycluilation for this sample.
* @note This function must be called with a frequency greater or equal to the PID's sampling frequency
*/
void oven_pid_handle(void); void oven_pid_handle(void);
/**
* @brief Stop the oven PID controller
*/
void oven_pid_stop(void); void oven_pid_stop(void);
/**
* @brief Abort the oven PID controller. This is the same as oven_pid_stop() but will set the abort flag.
* @note this function is called by the safety controller to disable the PID controller in case of an error.
*/
void oven_pid_abort(void); void oven_pid_abort(void);
/**
* @brief Set the target temperature of the PID controller.
* @param temp
*/
void oven_pid_set_target_temperature(float temp); void oven_pid_set_target_temperature(float temp);
/**
* @brief Output the power level currently configured to the SSR.
*
* This function is separated from oven_driver_set_power() because it is called in the main loop after the
* safety controller has run. This ensures, that if the safety controller decides to stop the PID no glitch makes it
* out to the SSR.
*/
void oven_driver_apply_power_level(void); void oven_driver_apply_power_level(void);
/**
* @brief Get the current status of the oven's PID controller
* @return
*/
enum oven_pid_status oven_pid_get_status(void); enum oven_pid_status oven_pid_get_status(void);
/** @} */
#endif /* __OVEN_DRIVER_H__ */ #endif /* __OVEN_DRIVER_H__ */

View File

@ -18,9 +18,19 @@
* If not, see <http://www.gnu.org/licenses/>. * If not, see <http://www.gnu.org/licenses/>.
*/ */
/**
* @addtogroup main-cycle-counter
* @{
*/
#include <reflow-controller/main-cycle-counter.h> #include <reflow-controller/main-cycle-counter.h>
#include <helper-macros/helper-macros.h> #include <helper-macros/helper-macros.h>
/**
* @brief Variable storing the main cycle counter.
* @note This variable should not be accessed directly.
* Use the main_cycle_counter_get() or main_cycle_counter_inc() functions.
*/
static uint64_t IN_SECTION(.ccm.bss) main_cycle_counter; static uint64_t IN_SECTION(.ccm.bss) main_cycle_counter;
void main_cycle_counter_init(void) void main_cycle_counter_init(void)
@ -37,3 +47,5 @@ uint64_t main_cycle_counter_get(void)
{ {
return main_cycle_counter; return main_cycle_counter;
} }
/** @} */

View File

@ -67,13 +67,13 @@ static void setup_nvic_priorities(void)
FATFS fs; FATFS fs;
#define fs_ptr (&fs) #define fs_ptr (&fs)
/**
* @brief Configure UART GPIOs
* In case the application is build in debug mode, use the TX/RX Pins on the debug header
* else the Pins on the DIGIO header are configured in the digio module and this function does nothing.
*/
static inline void uart_gpio_config(void) static inline void uart_gpio_config(void)
{ {
/*
* In case the application is build in debug mode, use the TX/RX Pins on the debug header
* else the Pins on the DIGIO header are configured in the digio module
*/
#if defined(DEBUGBUILD) || defined(UART_ON_DEBUG_HEADER) #if defined(DEBUGBUILD) || defined(UART_ON_DEBUG_HEADER)
rcc_manager_enable_clock(&RCC->AHB1ENR, BITMASK_TO_BITNO(SHELL_UART_PORT_RCC_MASK)); rcc_manager_enable_clock(&RCC->AHB1ENR, BITMASK_TO_BITNO(SHELL_UART_PORT_RCC_MASK));
SHELL_UART_PORT->MODER &= MODER_DELETE(SHELL_UART_TX_PIN) & MODER_DELETE(SHELL_UART_RX_PIN); SHELL_UART_PORT->MODER &= MODER_DELETE(SHELL_UART_TX_PIN) & MODER_DELETE(SHELL_UART_RX_PIN);
@ -86,9 +86,19 @@ static inline void uart_gpio_config(void)
#endif #endif
} }
/**
* @brief TX buffer for the shell's uart
*/
static char shell_uart_tx_buff[256]; static char shell_uart_tx_buff[256];
/**
* @brief RX buffer for the shell's uart
*/
static char shell_uart_rx_buff[48]; static char shell_uart_rx_buff[48];
/**
* @brief The uart instance handling the shellmatta shell.
*/
struct stm_uart shell_uart; struct stm_uart shell_uart;
static shellmatta_retCode_t write_shell_callback(const char *data, uint32_t len) static shellmatta_retCode_t write_shell_callback(const char *data, uint32_t len)
@ -97,6 +107,12 @@ static shellmatta_retCode_t write_shell_callback(const char *data, uint32_t len)
return SHELLMATTA_OK; return SHELLMATTA_OK;
} }
/**
* @brief Configure the UART for the shellmatta shell.
*
* This will configure the UART for use with a DMA ring buffer.
* @param uart
*/
static inline void setup_shell_uart(struct stm_uart *uart) static inline void setup_shell_uart(struct stm_uart *uart)
{ {
uart->rx = 1; uart->rx = 1;
@ -119,6 +135,11 @@ static inline void setup_shell_uart(struct stm_uart *uart)
NVIC_EnableIRQ(DMA2_Stream7_IRQn); NVIC_EnableIRQ(DMA2_Stream7_IRQn);
} }
/**
* @brief Mount the SD card if available and not already mounted
* @param mounted The current mounting state of the SD card
* @return true if mounted, false if an error occured or the SD is not inserted and cannot be mounted
*/
static bool mount_sd_card_if_avail(bool mounted) static bool mount_sd_card_if_avail(bool mounted)
{ {
FRESULT res; FRESULT res;
@ -148,6 +169,13 @@ static bool mount_sd_card_if_avail(bool mounted)
return mounted; return mounted;
} }
/**
* @brief Process the boot status structure in the safety (backup) RAM
* Depending on the flags set there, this function will:
* - Reboot into the ram code for reflashing
* - Display the PANIC message
* - Display if the flash has been successfully updated
*/
static inline void handle_boot_status(void) static inline void handle_boot_status(void)
{ {
struct safety_memory_boot_status status; struct safety_memory_boot_status status;
@ -183,34 +211,69 @@ static inline void handle_boot_status(void)
} }
} }
/**
* @brief Setup the system.
*
* This function does all basic initializations of the MCU and its peripherals
*/
static inline void setup_system(void) static inline void setup_system(void)
{ {
float tmp; float tmp;
/** - Setup the NVIC priorities of the core peripherals using interrupts */
setup_nvic_priorities(); setup_nvic_priorities();
/* Init safety controller and safety memory */ /** - Init safety controller and safety memory */
safety_controller_init(); safety_controller_init();
/** - Setup the systick module generating the 100us tick fort the GUI and
* the 1ms tick for the global systick timestamp
*/
systick_setup(); systick_setup();
/** - Initialize the oven output driver outputting the wavepacket control signal for the SSR and */
oven_driver_init(); oven_driver_init();
/** - Initialize all DIGIO Pins to theri default state and pin functions */
digio_setup_default_all(); digio_setup_default_all();
/** - Set-up the LED outputs */
led_setup(); led_setup();
/** - Set-up the loudspeaker / beeper output */
loudspeaker_setup(); loudspeaker_setup();
/** - Initialize the GUI */
gui_init(); gui_init();
/** - Initialize the pins for the uart interface. */
uart_gpio_config(); uart_gpio_config();
/** - Set-up the settings module */
settings_setup(); settings_setup();
/* Load the overtemperature limit from eeprom if available. Otherwise the default value will be used */ /** - Load the overtemperature limit from eeprom if available. Otherwise the default value will be used */
if (settings_load_overtemp_limit(&tmp) == SETT_LOAD_SUCCESS) if (settings_load_overtemp_limit(&tmp) == SETT_LOAD_SUCCESS)
safety_controller_set_overtemp_limit(tmp); safety_controller_set_overtemp_limit(tmp);
/** - Handle the boot status struct in the safety memory */
handle_boot_status(); handle_boot_status();
/** - Initialize the shell UART */
setup_shell_uart(&shell_uart); setup_shell_uart(&shell_uart);
/** - Enable the ADC for PT1000 measurement */
adc_pt1000_setup_meas(); adc_pt1000_setup_meas();
} }
/**
* @brief Handle the input for the shell instance.
*
* This function will check if the RX ring buffer of the UART contains data.
* If so, it will prowvide it to the shellmatta shell.
*
* @param shell_handle Handle to the shellmatta instance
*/
static void handle_shell_uart_input(shellmatta_handle_t shell_handle) static void handle_shell_uart_input(shellmatta_handle_t shell_handle)
{ {
int uart_receive_status; int uart_receive_status;
@ -223,6 +286,10 @@ static void handle_shell_uart_input(shellmatta_handle_t shell_handle)
shell_handle_input(shell_handle, uart_input, uart_input_len); shell_handle_input(shell_handle, uart_input, uart_input_len);
} }
/**
* @brief This is the main function containing the initilizations and the cyclic main loop
* @return Don't care. This function will never return. We're on an embedded device...
*/
int main(void) int main(void)
{ {
bool cal_active; bool cal_active;
@ -235,21 +302,30 @@ int main(void)
int menu_wait_request; int menu_wait_request;
uint64_t quarter_sec_timestamp = 0ULL; uint64_t quarter_sec_timestamp = 0ULL;
/* Setup all the peripherals and external componets like LCD, EEPROM etc. and the safety controller */ /** - Setup all the peripherals and external componets like LCD, EEPROM etc. and the safety controller */
setup_system(); setup_system();
/* Try load the calibration. This will only succeed if there's an EEPROM */ /** - Try load the calibration. This will only succeed if there's an EEPROM */
status = settings_load_calibration(&sens, &offset); status = settings_load_calibration(&sens, &offset);
if (!status) if (!status)
adc_pt1000_set_resistance_calibration(offset, sens, true); adc_pt1000_set_resistance_calibration(offset, sens, true);
/** - Initialize the shellmatta shell */
shell_handle = shell_init(write_shell_callback); shell_handle = shell_init(write_shell_callback);
/** - Print motd to shell */
shell_print_motd(shell_handle); shell_print_motd(shell_handle);
/** - Set the main cycle counter to 0 */
main_cycle_counter_init(); main_cycle_counter_init();
/** - Do a loop over the following */
while (1) { while (1) {
/** - If 250 ms have passed since the last time this step was reached, we try to initialize the
* SD card. If the card has been mounted and there is no current resistance calibration,
* it is tried to load it from SD card.
*/
if (systick_ticks_have_passed(quarter_sec_timestamp, 250)) { if (systick_ticks_have_passed(quarter_sec_timestamp, 250)) {
led_set(1, 0); led_set(1, 0);
sd_old = sd_card_mounted; sd_old = sd_card_mounted;
@ -267,29 +343,47 @@ int main(void)
quarter_sec_timestamp = systick_get_global_tick(); quarter_sec_timestamp = systick_get_global_tick();
} }
/** - Handle the GUI */
menu_wait_request = gui_handle(); menu_wait_request = gui_handle();
/** - Handle the uart input for the shell */
handle_shell_uart_input(shell_handle); handle_shell_uart_input(shell_handle);
/* Execute current profile step, if a profile is active */ /** - Execute current profile step, if a profile is active */
temp_profile_executer_handle(); temp_profile_executer_handle();
/** - Handle the safety controller. This must be called! Otherwise a watchdog reset will occur */
safety_controller_handle(); safety_controller_handle();
/** - If the Oven PID controller is running, we handle its sample function */
if (oven_pid_get_status() == OVEN_PID_RUNNING) if (oven_pid_get_status() == OVEN_PID_RUNNING)
oven_pid_handle(); oven_pid_handle();
/** - Apply the power level of the oven driver */
oven_driver_apply_power_level(); oven_driver_apply_power_level();
/** - Report the main loop timing to the timing monitor to detect a slowed down main loop */
safety_controller_report_timing(ERR_TIMING_MAIN_LOOP); safety_controller_report_timing(ERR_TIMING_MAIN_LOOP);
/** - If the menu requests a directly following loop run, the main loop will continue.
* Otherwise it will wait for the next interrupt
*/
if (menu_wait_request) if (menu_wait_request)
__WFI(); __WFI();
else else
__NOP(); __NOP();
/** - Increment the main cycle counter */
main_cycle_counter_inc(); main_cycle_counter_inc();
} }
return 0; return 0;
} }
/**
* @brief Callback function for the SDIO driver to wait \p ms milliseconds
* @param ms
* @warning This function relies on the systick and must not be used in interrupt context.
*/
void sdio_wait_ms(uint32_t ms) void sdio_wait_ms(uint32_t ms)
{ {
systick_wait_ms(ms); systick_wait_ms(ms);

View File

@ -18,6 +18,11 @@
* If not, see <http://www.gnu.org/licenses/>. * If not, see <http://www.gnu.org/licenses/>.
*/ */
/**
* @addtogroup oven-driver
* @{
*/
#include <reflow-controller/oven-driver.h> #include <reflow-controller/oven-driver.h>
#include <reflow-controller/periph-config/oven-driver-hwcfg.h> #include <reflow-controller/periph-config/oven-driver-hwcfg.h>
#include <stm-periph/rcc-manager.h> #include <stm-periph/rcc-manager.h>
@ -28,13 +33,42 @@
#include <reflow-controller/safety/safety-controller.h> #include <reflow-controller/safety/safety-controller.h>
#include <reflow-controller/hw-version-detect.h> #include <reflow-controller/hw-version-detect.h>
/**
* @brief PID ontroller instance of the oven driver
*/
static struct pid_controller IN_SECTION(.ccm.bss) oven_pid; static struct pid_controller IN_SECTION(.ccm.bss) oven_pid;
/**
* @brief Oven PID is currently running
*/
static bool oven_pid_running; static bool oven_pid_running;
/**
* @brief Oven PID has been aborted / abnormally stopped.
*/
static bool oven_pid_aborted; static bool oven_pid_aborted;
/**
* @brief Power level [0..100] of the oven to be applied
*/
static uint8_t IN_SECTION(.ccm.bss) oven_driver_power_level; static uint8_t IN_SECTION(.ccm.bss) oven_driver_power_level;
/**
* @brief Current target temperature of the oven PID controller in degC
*/
static float IN_SECTION(.ccm.bss) target_temp; static float IN_SECTION(.ccm.bss) target_temp;
/**
* @brief The millisecond timestamp of the last run of the PID controller
*/
static uint64_t IN_SECTION(.ccm.bss) timestamp_last_run; static uint64_t IN_SECTION(.ccm.bss) timestamp_last_run;
/**
* @brief Enable or disable the safety enable line of the oven control relay.
* @param enable
* @note This function is only working for hardware revisions >= v1.3. Below,
* the safety enable is unavailable.
*/
static void ssr_safety_en(bool enable) static void ssr_safety_en(bool enable)
{ {
if (get_pcb_hardware_version() >= HW_REV_V1_3) { if (get_pcb_hardware_version() >= HW_REV_V1_3) {
@ -165,3 +199,5 @@ enum oven_pid_status oven_pid_get_status(void)
return ret; return ret;
} }
/** @} */

View File

@ -24,6 +24,12 @@
#include <reflow-controller/safety/safety-memory.h> #include <reflow-controller/safety/safety-memory.h>
#include <helper-macros/helper-macros.h> #include <helper-macros/helper-macros.h>
/**
* @brief Handler for hard faults.
*
* This hard fault handler will turn of the oven output and go to panic mode.
* @note Depending on the fault condition some of the things done here could fail.
*/
void HardFault_Handler(void) void HardFault_Handler(void)
{ {
/* This is a non recoverable fault. Stop the oven */ /* This is a non recoverable fault. Stop the oven */
@ -38,11 +44,26 @@ void HardFault_Handler(void)
} }
/* Overwrite default handler. Go to panic mode */ /* Overwrite default handler. Go to panic mode */
/**
* @brief Default interrupt handler. This will trigger a panic.
* @note This function should never be called during normal operation.
*/
void __int_default_handler(void) void __int_default_handler(void)
{ {
panic_mode(); panic_mode();
} }
/**
* @brief Put the device into panic mode.
*
* This function can be used when a irrecoverable error is encountered.
* The function will:
* - Disable the oven output
* - Set the panic flag in the safety memory
* - Hang and wait for the watchdog to trigger a system reset.
*
* The panic state will be entered after the reset due to the set panic flag in the safety memory
*/
void panic_mode(void) void panic_mode(void)
{ {
/* This variable is static, because I don't want it to be on the stack */ /* This variable is static, because I don't want it to be on the stack */