mhu/reflow-oven-control-sw
2
0
Fork 0
Code Issues 4 Pull Requests Releases 4 Wiki Activity

Add a bunch of stuff: Add baudrate reconfig command to shell and move the uart to separate C file

Browse Source
This commit is contained in:
Mario Hüttel
2021-11-27 17:41:11 +01:00
parent 6b9b7d78a0
commit 96e0931c9f
13 changed files with 274 additions and 76 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
stm-firmware/boot/startup_stm32f407vx.c
View File

@@ -324,7 +324,6 @@ void __attribute__((noreturn)) Reset_Handler(void) {
/* Move the stack and the stack pointer to CCMRAM
* This allows us to perform a RAM test on the main RAM.
*/
/* R2 holds the amount of bytes / words on the stack. */
__asm__ __volatile__ (
"mov r2, sp\n" /* Move stack pointer to register 2 */
"sub r2, %[stacktop], r2\n" /* Subtract stackpointer from top of ram => byte usage */

1
stm-firmware/config-parser/config-parser.c
View File

@@ -91,7 +91,6 @@ static int parse_value(struct config_parser_entry *entry, char *value_start_toke
if (value_start_token[0] != '-') {
/* Try parsing as ul */
/* Try parsing as int */
entry->value.uint_val = strtoul(value_start_token, &endptr, 0);
if (endptr == value_start_token) {
return -1;

8
stm-firmware/include/reflow-controller/periph-config/shell-uart-config.h
View File

@@ -25,9 +25,11 @@
#endif
/* UART_DIV is 45.5625 => 115200 @ 84 MHz */
#define SHELL_UART_DIV_FRACTION 9U /* Equals 9/16 = 0.5625 */
#define SHELL_UART_DIV_MANTISSA 45U /* Equals 45 */
#define SHELL_UART_DEFAULT_DIV_FRACTION 9U /* Equals 9/16 = 0.5625 */
#define SHELL_UART_DEFAULT_DIV_MANTISSA 45U /* Equals 45 */
#define SHELL_UART_BRR_REG_VALUE ((SHELL_UART_DIV_MANTISSA<<4) | SHELL_UART_DIV_FRACTION);
#define SHELL_UART_DEFAULT_BRR_REG_VALUE ((SHELL_UART_DEFAULT_DIV_MANTISSA<<4) | SHELL_UART_DEFAULT_DIV_FRACTION);
#define SHELL_UART_PERIPHERAL_CLOCK (84000000UL)
#endif /* __SHELL_UART_CONFIG_H__ */

3
stm-firmware/include/reflow-controller/temp-converter.h
View File

@@ -25,7 +25,8 @@
* @brief Convert PT1000 resistance to temperature in degrees celsius
* @param resistance PT1000 resistance value
* @param[out] temp_out Temperature output
* @return 0 if ok, -1 if value is below conversion range, 1 if value is above conversion range,-1000 in case of pointer error
* @return 0 if ok, -1 if value is below conversion range, 1 if value is above conversion range,
* -1000 in case of pointer error
*/
int temp_converter_convert_resistance_to_temp(float resistance, float *temp_out);

51
stm-firmware/include/reflow-controller/ui/shell-uart.h Normal file
View File

@@ -0,0 +1,51 @@
/* Reflow Oven Controller
*
* Copyright (C) 2021 Mario Hüttel <mario.huettel@gmx.net>
*
* This file is part of the Reflow Oven Controller Project.
*
* The reflow oven controller is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* The Reflow Oven Control Firmware is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with the reflow oven controller project.
* If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __SHELL_UART_H__
#include <shellmatta.h>
#include <stddef.h>
#include <stdint.h>
/**
* @brief Configure the UART for the shellmatta shell.
*
* This will configure the UART for use with a DMA ring buffer.
* @param uart
*/
void shell_uart_setup(void);
shellmatta_retCode_t shell_uart_write_callback(const char *data, uint32_t len);
int shell_uart_receive_data_with_dma(const char **data, size_t *len);
/**
* @brief Configure a new connection speed.
* @param new_baud Baudrate. E.g: 115200
* @return Error in permille (1/1000). A return value of 2 means a baudrate error of: 0.002 or 0.2%.
* Return value is negative in case of a hard error.
*/
int32_t shell_uart_reconfig_baud(uint32_t new_baud);
uint32_t shell_uart_get_current_baudrate(void);
#define __SHELL_UART_H__
#endif /* __SHELL_UART_H__ */

0
stm-firmware/include/reflow-controller/shell.h → stm-firmware/include/reflow-controller/ui/shell.h
View File

2
stm-firmware/include/stm-periph/uart.h
View File

@@ -50,6 +50,8 @@ int uart_init(struct stm_uart *uart);
void uart_change_brr(struct stm_uart *uart, uint32_t brr);
uint32_t uart_get_brr(struct stm_uart *uart);
void uart_disable(struct stm_uart *uart);
void uart_send_char(struct stm_uart *uart, char c);

71
stm-firmware/main.c
View File

@@ -31,7 +31,6 @@
#include <setup/system_stm32f4xx.h>
#include <reflow-controller/systick.h>
#include <reflow-controller/adc-meas.h>
#include <reflow-controller/shell.h>
#include <reflow-controller/digio.h>
#include "fatfs/shimatta_sdio_driver/shimatta_sdio.h"
#include <stm-periph/stm32-gpio-macros.h>
@@ -41,6 +40,8 @@
#include <reflow-controller/oven-driver.h>
#include <fatfs/ff.h>
#include <reflow-controller/ui/gui.h>
#include <reflow-controller/ui/shell.h>
#include <reflow-controller/ui/shell-uart.h>
#include <reflow-controller/safety/safety-controller.h>
#include <reflow-controller/settings/settings.h>
#include <reflow-controller/safety/safety-memory.h>
@@ -87,55 +88,6 @@ static inline void uart_gpio_config(void)
#endif
}
/**
* @brief TX buffer for the shell's uart
*/
static char shell_uart_tx_buff[256];
/**
* @brief RX buffer for the shell's uart
*/
static char shell_uart_rx_buff[48];
/**
* @brief The uart instance handling the shellmatta shell.
*/
struct stm_uart shell_uart;
static shellmatta_retCode_t write_shell_callback(const char *data, uint32_t len)
{
uart_send_array_with_dma(&shell_uart, data, len);
return SHELLMATTA_OK;
}
/**
* @brief Configure the UART for the shellmatta shell.
*
* This will configure the UART for use with a DMA ring buffer.
* @param uart
*/
static inline void setup_shell_uart(struct stm_uart *uart)
{
uart->rx = 1;
uart->tx = 1;
uart->brr_val = SHELL_UART_BRR_REG_VALUE;
uart->rcc_reg = &SHELL_UART_RCC_REG;
uart->rcc_bit_no = BITMASK_TO_BITNO(SHELL_UART_RCC_MASK);
uart->uart_dev = SHELL_UART_PERIPH;
uart->dma_rx_buff = shell_uart_rx_buff;
uart->dma_tx_buff = shell_uart_tx_buff;
uart->rx_buff_count = sizeof(shell_uart_rx_buff);
uart->tx_buff_count = sizeof(shell_uart_tx_buff);
uart->base_dma_num = 2;
uart->dma_rx_stream = SHELL_UART_RECEIVE_DMA_STREAM;
uart->dma_tx_stream = SHELL_UART_SEND_DMA_STREAM;
uart->dma_rx_trigger_channel = SHELL_UART_RX_DMA_TRIGGER;
uart->dma_tx_trigger_channel = SHELL_UART_TX_DMA_TRIGGER;
uart_init(uart);
NVIC_EnableIRQ(DMA2_Stream7_IRQn);
}
/**
* @brief Mount the SD card if available and not already mounted
* @param mounted The current mounting state of the SD card
@@ -293,7 +245,7 @@ static inline void setup_system(void)
handle_boot_status();
/** - Initialize the shell UART */
setup_shell_uart(&shell_uart);
shell_uart_setup();
/** - Enable the ADC for PT1000 measurement */
adc_pt1000_setup_meas();
@@ -314,7 +266,7 @@ static void handle_shell_uart_input(shellmatta_handle_t shell_handle)
size_t uart_input_len;
/* Handle UART input for shell */
uart_receive_status = uart_receive_data_with_dma(&shell_uart, &uart_input, &uart_input_len);
uart_receive_status = shell_uart_receive_data_with_dma(&uart_input, &uart_input_len);
if (uart_receive_status >= 0)
shell_handle_input(shell_handle, uart_input, uart_input_len);
}
@@ -344,7 +296,7 @@ int main(void)
adc_pt1000_set_resistance_calibration(offset, sens, true);
/** - Initialize the shellmatta shell */
shell_handle = shell_init(write_shell_callback);
shell_handle = shell_init(shell_uart_write_callback);
/** - Print motd to shell */
shell_print_motd(shell_handle);
@@ -421,16 +373,3 @@ void sdio_wait_ms(uint32_t ms)
{
systick_wait_ms(ms);
}
/**
* @brief Handles the TX of UART1 (Shellmatta)
*/
void DMA2_Stream7_IRQHandler(void)
{
uint32_t hisr = DMA2->HISR & (0x3F << 22);
DMA2->HIFCR = hisr;
if (hisr & DMA_HISR_TCIF7)
uart_tx_dma_complete_int_callback(&shell_uart);
}

7
stm-firmware/safety/watchdog.c
View File

@@ -67,6 +67,13 @@ int watchdog_setup(uint8_t prescaler)
else
prescaler_reg_val = 6UL;
/** - (De)activate the watchdog during debug access according to @ref WATCHDOG_HALT_DEBUG */
if (WATCHDOG_HALT_DEBUG) {
DBGMCU->APB1FZ |= DBGMCU_APB1_FZ_DBG_IWDG_STOP;
} else {
DBGMCU->APB1FZ &= ~DBGMCU_APB1_FZ_DBG_IWDG_STOP;
}
/** - Unlock registers */
IWDG->KR = STM32_WATCHDOG_REGISTER_ACCESS_KEY;

8
stm-firmware/stm-periph/uart.c
View File

@@ -95,6 +95,14 @@ void uart_change_brr(struct stm_uart *uart, uint32_t brr)
uart->uart_dev->BRR = brr;
}
uint32_t uart_get_brr(struct stm_uart *uart)
{
if (!uart || !uart->uart_dev)
return 0;
return uart->brr_val;
}
void uart_disable(struct stm_uart *uart)
{
if (!uart)

130
stm-firmware/ui/shell-uart.c Normal file
View File

@@ -0,0 +1,130 @@
/* Reflow Oven Controller
*
* Copyright (C) 2021 Mario Hüttel <mario.huettel@gmx.net>
*
* This file is part of the Reflow Oven Controller Project.
*
* The reflow oven controller is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* The Reflow Oven Control Firmware is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with the reflow oven controller project.
* If not, see <http://www.gnu.org/licenses/>.
*/
#include <reflow-controller/ui/shell-uart.h>
#include <reflow-controller/periph-config/shell-uart-config.h>
#include <stm-periph/stm32-gpio-macros.h>
#include <stm-periph/uart.h>
#include <helper-macros/helper-macros.h>
/**
* @brief TX buffer for the shell's uart
*/
static char shell_uart_tx_buff[4096];
/**
* @brief RX buffer for the shell's uart
*/
static char shell_uart_rx_buff[128];
/**
* @brief The uart instance handling the shellmatta shell.
*/
struct stm_uart shell_uart;
void shell_uart_setup(void)
{
struct stm_uart *uart = &shell_uart;
uart->rx = 1;
uart->tx = 1;
uart->brr_val = SHELL_UART_DEFAULT_BRR_REG_VALUE;
uart->rcc_reg = &SHELL_UART_RCC_REG;
uart->rcc_bit_no = BITMASK_TO_BITNO(SHELL_UART_RCC_MASK);
uart->uart_dev = SHELL_UART_PERIPH;
uart->dma_rx_buff = shell_uart_rx_buff;
uart->dma_tx_buff = shell_uart_tx_buff;
uart->rx_buff_count = sizeof(shell_uart_rx_buff);
uart->tx_buff_count = sizeof(shell_uart_tx_buff);
uart->base_dma_num = 2;
uart->dma_rx_stream = SHELL_UART_RECEIVE_DMA_STREAM;
uart->dma_tx_stream = SHELL_UART_SEND_DMA_STREAM;
uart->dma_rx_trigger_channel = SHELL_UART_RX_DMA_TRIGGER;
uart->dma_tx_trigger_channel = SHELL_UART_TX_DMA_TRIGGER;
uart_init(uart);
NVIC_EnableIRQ(DMA2_Stream7_IRQn);
}
shellmatta_retCode_t shell_uart_write_callback(const char *data, uint32_t len)
{
uart_send_array_with_dma(&shell_uart, data, len);
return SHELLMATTA_OK;
}
int shell_uart_receive_data_with_dma(const char **data, size_t *len)
{
return uart_receive_data_with_dma(&shell_uart, data, len);
}
int32_t shell_uart_reconfig_baud(uint32_t new_baud)
{
uint32_t brr_val_floor;
uint32_t brr_val_remainder;
uint32_t error_permille;
int64_t actual_baud;
/* Calculate the new BRR register value */
brr_val_floor = SHELL_UART_PERIPHERAL_CLOCK / new_baud;
brr_val_remainder = SHELL_UART_PERIPHERAL_CLOCK % new_baud;
/* Round to the nearest value */
if (brr_val_remainder > (new_baud / 2u)) {
brr_val_floor++;
brr_val_remainder = new_baud - brr_val_remainder;
}
actual_baud = (1000U *(int64_t)SHELL_UART_PERIPHERAL_CLOCK) / brr_val_floor;
error_permille = (ABS(actual_baud - 1000U * (int64_t)new_baud)) / (int64_t)new_baud;
if (error_permille < 20u) {
uart_change_brr(&shell_uart, brr_val_floor);
} else {
return -1;
}
return (int32_t)error_permille;
}
uint32_t shell_uart_get_current_baudrate(void)
{
uint32_t brr;
brr = uart_get_brr(&shell_uart);
if (brr == 0)
return 0;
return (SHELL_UART_PERIPHERAL_CLOCK) / brr;
}
/**
* @brief Handles the TX of UART1 (Shellmatta)
*/
void DMA2_Stream7_IRQHandler(void)
{
uint32_t hisr = DMA2->HISR & (0x3F << 22);
DMA2->HIFCR = hisr;
if (hisr & DMA_HISR_TCIF7)
uart_tx_dma_complete_int_callback(&shell_uart);
}

66
stm-firmware/shell.c → stm-firmware/ui/shell.c
View File

@@ -20,7 +20,7 @@
#include <stm32/stm32f4xx.h>
#include <cmsis/core_cm4.h>
#include <reflow-controller/shell.h>
#include <reflow-controller/ui/shell.h>
#include <stm-periph/uart.h>
#include <string.h>
#include <reflow-controller/adc-meas.h>
@@ -47,6 +47,7 @@
#include <reflow-controller/main-cycle-counter.h>
#include <stm-periph/option-bytes.h>
#include <reflow-controller/ui/gui.h>
#include <reflow-controller/ui/shell-uart.h>
#include <stdio.h>
@@ -946,6 +947,56 @@ shellmatta_retCode_t shell_cmd_print_opt_bytes(const shellmatta_handle_t handle,
return SHELLMATTA_OK;
}
shellmatta_retCode_t shell_cmd_set_baud(const shellmatta_handle_t handle, const char *args, uint32_t len)
{
shellmatta_retCode_t opt_stat;
char option;
char *argument;
uint32_t arg_len;
char *baud_string = NULL;
uint32_t baud;
(void)len;
(void)args;
const shellmatta_opt_long_t options[] = {
{NULL, '\0', SHELLMATTA_OPT_ARG_NONE},
};
while (1) {
opt_stat = shellmatta_opt_long(handle, options, &option, &argument, &arg_len);
if (opt_stat != SHELLMATTA_OK)
break;
switch (option) {
case '\0':
baud_string = argument;
break;
default:
break;
}
}
shellmatta_printf(handle, "Current baudrate: %u\r\n", (unsigned int)shell_uart_get_current_baudrate());
if (!baud_string) {
shellmatta_printf(handle, "Please specify a baudrate\r\n");
return SHELLMATTA_OK;
}
baud = strtoul(baud_string, NULL, 0);
if (baud < 38400) {
shellmatta_printf(handle, "38400 is the minimum recommended baudrate!\r\n");
}
shellmatta_printf(handle, "Setting baud to: %u\r\n", (unsigned int)baud);
if (shell_uart_reconfig_baud(baud) < 0) {
shellmatta_printf(handle,"Setting baudrate not possible. Error greater than 2%%\r\n");
}
return SHELLMATTA_OK;
}
//typedef struct shellmatta_cmd
//{
// char *cmd; /**< command name */
@@ -955,7 +1006,7 @@ shellmatta_retCode_t shell_cmd_print_opt_bytes(const shellmatta_handle_t handle,
// shellmatta_cmdFct_t cmdFct; /**< pointer to the cmd callack function */
// struct shellmatta_cmd *next; /**< pointer to next command or NULL */
//} shellmatta_cmd_t;
static shellmatta_cmd_t cmd[24] = {
static shellmatta_cmd_t cmd[25] = {
{
.cmd = "version",
.cmdAlias = "ver",
@@ -1147,8 +1198,17 @@ static shellmatta_cmd_t cmd[24] = {
.helpText = "Print the currently set option bytes of the STM32",
.usageText = "",
.cmdFct = shell_cmd_print_opt_bytes,
.next = &cmd[24],
},
{
.cmd = "baudrate",
.cmdAlias = "opt-bytes",
.helpText = "Set a new temporary baudrate for the UART",
.usageText = "baudrate <new baud>",
.cmdFct = shell_cmd_set_baud,
.next = NULL,
}
},
};
shellmatta_handle_t shell_init(shellmatta_write_t write_func)

2
stm-firmware/updater/ram-code/uart.c
View File

@@ -6,7 +6,7 @@
void uart_init(void)
{
SHELL_UART_RCC_REG |= SHELL_UART_RCC_MASK;
SHELL_UART_PERIPH->BRR = SHELL_UART_BRR_REG_VALUE;
SHELL_UART_PERIPH->BRR = SHELL_UART_DEFAULT_BRR_REG_VALUE;
SHELL_UART_PERIPH->CR2 = 0;
SHELL_UART_PERIPH->CR3 = 0;
SHELL_UART_PERIPH->CR1 = USART_CR1_TE | USART_CR1_UE;