Merge branch 'dev' into feature/28-profile-parser

stm-firmware/include/reflow-controller/adc-meas.h

@@ -47,7 +47,7 @@
 /**
  * @brief Difference in Ohm between filter input and output that determines if the filter is stable or unstable.
  */
-#define ADC_PT1000_FILTER_UNSTABLE_DIFF 10
+#define ADC_PT1000_FILTER_UNSTABLE_DIFF 20
 
 /**
  * @brief Sample count, the moving average filter has to be within @ref ADC_PT1000_FILTER_UNSTABLE_DIFF for the filter

stm-firmware/include/reflow-controller/safety/safety-config.h

@@ -130,7 +130,7 @@ enum analog_value_monitor {
 #define SAFETY_EXT_WATCHDOG_PIN (12)
 
 /**
- * @brief Default Limit of the overtemperature detection
+ * @brief Default Limit of the overtemperature detection in degrees celsius
  */
 #define SAFETY_DEFAULT_OVERTEMP_LIMIT_DEGC (260.0f)
 

stm-firmware/include/reflow-controller/safety/stack-check.h

@@ -87,7 +87,7 @@ int stack_check_init_corruption_detect_area(void);
  * @ref stack_check_init_corruption_detect_area beforehand.
  *
  * The CRC unit must be enabled for this function to work properly.
- * After calling @stack_check_init_corruption_detect_area, this is the case.
+ * After calling @ref stack_check_init_corruption_detect_area, this is the case.
  *
  * @return 0 if no error is detected, all other values are an error.
  * @note Make sure CRC unit is enabled.

stm-firmware/include/reflow-controller/systick.h

@@ -31,7 +31,7 @@
 /**
  * @brief Reload value for the systick timer.
  *
- * This value has to be configured to set the systick to a one milliscond tick interval
+ * This value has to be configured to set the systick to a 100 us tick interval
  * The default value is 16800, which results in a 100us tick for 168 MHz CPU speed
  */
 #define SYSTICK_RELOAD (16800UL)
@@ -55,7 +55,7 @@ extern volatile uint64_t global_tick_ms;
 extern volatile uint32_t lcd_tick_100us;
 
 /**
- * @brief Setup the Systick timer to generate a 1 ms tick
+ * @brief Setup the Systick timer to generate a 100 us tick
  */
 void systick_setup(void);