Add calibration routine from shell

stm-firmware/include/helper-macros/helper-macros.h

@@ -11,4 +11,7 @@
 
 #define COUNT_OF(x) ((sizeof(x)/sizeof(0[x])) / ((size_t)(!(sizeof(x) % sizeof(0[x])))))
 
+#define MIN(a,b) (((a) < (b)) ? (a) : (b))
+#define MAX(a,b) (((a) > (b)) ? (a) : (b))
+
 #endif /* __HELPER_MACROS_H__ */

stm-firmware/include/reflow-controller/calibration.h

@@ -20,13 +20,16 @@
 #ifndef __CALIBRATION_H__
 #define __CALIBRATION_H__
 
-#define CALIBRATION_MAX_STDDEV_OHM 1.0f
+#define CALIBRATION_MAX_PEAK_PEAK_NOISE_OHM 8.0f
 
 #include <stdint.h>
+#include <shellmatta.h>
 
 void calibration_calculate(float low_measured, float low_setpoint, float high_measured, float high_setpoint,
 			   float *sens_deviation, float *sens_corrected_offset);
 
-int calibration_acquire_data(float *mu, float *sigma, uint32_t count);
+int calibration_acquire_data(float *mu, float *max_dev, uint32_t count);
+
+int calibration_sequence_shell_cmd(shellmatta_handle_t shell);
 
 #endif /* __CALIBRATION_H__ */

stm-firmware/include/stm-periph/dma-ring-buffer.h

@@ -51,7 +51,7 @@ int dma_ring_buffer_periph_to_mem_initialize(struct dma_ring_buffer_to_mem *dma_
  * @param[in] buff Ring buffer structure
  * @param[out] data_buff Pointer to set to new data. This must not be modified!
  * @param[out] len Length in elements
- * @return 0 if successful (data, no data), -1 if error, and 1 if data with wrap around. Call function again in this case to retrieve rest after wrap around.
+ * @return 0 if successful, but no data), -1 if error, 1 if data, and 2 if data with wrap around. Call function again in this case to retrieve rest after wrap around.
  */
 int dma_ring_buffer_periph_to_mem_get_data(struct dma_ring_buffer_to_mem *buff, const void **data_buff, size_t *len);
 

stm-firmware/main.c

@@ -31,6 +31,7 @@ int main()
 	const char *uart_input;
 	size_t uart_input_len;
 	shellmatta_handle_t shell_handle;
+	int uart_receive_status;
 
 	setup_nvic_priorities();
 	systick_setup();
@@ -51,11 +52,10 @@ int main()
 	while(1) {
 		pt1000_value_status = adc_pt1000_get_current_resistance(&pt1000_value);
 
-		if (uart_receive_data_with_dma(&uart_input, &uart_input_len) >= 0) {
+		uart_receive_status = uart_receive_data_with_dma(&uart_input, &uart_input_len);
+		if (uart_receive_status >= 1)
 			shell_handle_input(shell_handle, uart_input, uart_input_len);
 	}
-		//systick_wait_ms(300);
-	}
 
 }
 

stm-firmware/shell.c

@@ -152,14 +152,14 @@ static shellmatta_retCode_t shell_cmd_uptime(const shellmatta_handle_t   handle,
 	return SHELLMATTA_OK;
 }
 
-static shellmatta_retCode_t shell_cmd_acquire_val(const shellmatta_handle_t   handle,
+static shellmatta_retCode_t shell_cmd_cal(const shellmatta_handle_t   handle,
 						  const char                  *arguments,
 						  uint32_t length)
 {
-	float mu, sigma;
+	(void)arguments;
+	(void)length;
 
-	calibration_acquire_data(&mu, &sigma, 128U);
+	calibration_sequence_shell_cmd(handle);
-	shellmatta_printf(handle, "mu: %.2f\r\nsigma: %.3f\r\n", mu, sigma);
 	return SHELLMATTA_OK;
 }
 //typedef struct shellmatta_cmd
@@ -222,11 +222,11 @@ static shellmatta_cmd_t cmd[7] = {
 		.next = &cmd[6],
 	},
 	{
-		.cmd = "pt1000-acquire",
+		.cmd = "calibrate",
-		.cmdAlias = "ptac",
+		.cmdAlias = "cal",
-		.helpText = "Acquire 128 samples",
+		.helpText = "Calibrate resistance measurement",
 		.usageText = "",
-		.cmdFct = shell_cmd_acquire_val,
+		.cmdFct = shell_cmd_cal,
 		.next = NULL,
 	}
 };

stm-firmware/stm-periph/dma-ring-buffer.c

@@ -81,11 +81,12 @@ int dma_ring_buffer_periph_to_mem_get_data(struct dma_ring_buffer_to_mem *buff,
 		*data_buff = &(((char *)buff->data_ptr)[buff->get_idx * buff->element_size]);
 		*len = buff->buffer_count - buff->get_idx;
 		buff->get_idx = 0;
-		ret_code = 1;
+		ret_code = 2;
 	} else if (put_idx > buff->get_idx) {
 		*data_buff = &(((char *)buff->data_ptr)[buff->get_idx * buff->element_size]);
 		*len = put_idx - buff->get_idx;
 		buff->get_idx += *len;
+		ret_code = 1;
 	} else {
 		/* No new data */
 		*len = 0;

stm-firmware/syscalls.c

@@ -67,6 +67,6 @@ int _read(void)
 int _write(int fd, const void *buf, int count)
 {
 	if (fd == 1)
-		uart_send_array((char*)buf, count);
+		uart_send_array_with_dma((char*)buf, count);
 	return count;
 }