Implement option byte writing and set brown out level

This commit is contained in:
Mario Hüttel 2021-10-16 23:39:23 +02:00
parent decb484d06
commit eb41e5e210
2 changed files with 77 additions and 2 deletions

View File

@ -49,6 +49,7 @@
#include <reflow-controller/temp-profile/temp-profile-executer.h> #include <reflow-controller/temp-profile/temp-profile-executer.h>
#include <reflow-controller/settings/spi-eeprom.h> #include <reflow-controller/settings/spi-eeprom.h>
#include <reflow-controller/main-cycle-counter.h> #include <reflow-controller/main-cycle-counter.h>
#include <stm-periph/option-bytes.h>
static void setup_nvic_priorities(void) static void setup_nvic_priorities(void)
{ {
@ -211,6 +212,35 @@ static inline void handle_boot_status(void)
} }
} }
/**
* @brief Read out the option bytes of the STM32 and program them to the desired values.
*
* - This function currently forces the brown out level to Level 3.
*/
static void check_and_program_opt_bytes(void)
{
struct option_bytes opts;
int err;
/** - Read option bytes */
stm_option_bytes_read(&opts);
if (opts.brown_out_level != 0) {
/* Set the brown out level to level 3 => highest brown out limit. */
opts.brown_out_level = 0;
/** - Program the option bytes if brown out level was not set correctly */
err = stm_option_bytes_program(&opts);
/** - If programming failes, enter panic mode */
if (err)
panic_mode();
/** - If programming is successful, reset the system to apply new settings */
NVIC_SystemReset();
}
}
/** /**
* @brief Setup the system. * @brief Setup the system.
* *
@ -220,6 +250,9 @@ static inline void setup_system(void)
{ {
float tmp; float tmp;
/** - Read the option bytes and if necessary program them to the desired values */
check_and_program_opt_bytes();
/** - Setup the NVIC priorities of the core peripherals using interrupts */ /** - Setup the NVIC priorities of the core peripherals using interrupts */
setup_nvic_priorities(); setup_nvic_priorities();

View File

@ -21,6 +21,16 @@
#include <stm-periph/option-bytes.h> #include <stm-periph/option-bytes.h>
#include <stm32/stm32f4xx.h> #include <stm32/stm32f4xx.h>
/**
* @brief First key for unlocking hte option byte write access
*/
#define FLASH_OPTION_KEY1 (0x08192A3BUL)
/**
* @brief Second key for unlocking hte option byte write access
*/
#define FLASH_OPTION_KEY2 (0x4C5D6E7FUL)
void stm_option_bytes_read(struct option_bytes *opts) void stm_option_bytes_read(struct option_bytes *opts)
{ {
uint32_t opt_reg; uint32_t opt_reg;
@ -39,10 +49,42 @@ void stm_option_bytes_read(struct option_bytes *opts)
int stm_option_bytes_program(const struct option_bytes *opts) int stm_option_bytes_program(const struct option_bytes *opts)
{ {
FLASH->OPTKEYR = 0x08192A3BUL; uint32_t reg;
FLASH->OPTKEYR = 0x4C5D6E7FUL;
FLASH->OPTKEYR = FLASH_OPTION_KEY1;
FLASH->OPTKEYR = FLASH_OPTION_KEY2;
__DSB();
if (FLASH->OPTCR & FLASH_OPTCR_OPTLOCK) {
/* Unlocking failed */
return -1;
}
reg = FLASH->OPTCR;
reg &= ~FLASH_OPTCR_BOR_LEV;
reg &= ~FLASH_OPTCR_nRST_STDBY;
reg &= ~FLASH_OPTCR_nRST_STOP;
reg &= ~FLASH_OPTCR_nWRP;
reg &= ~FLASH_OPTCR_RDP;
reg &= ~FLASH_OPTCR_WDG_SW;
reg |= (opts->brown_out_level << 2) & FLASH_OPTCR_BOR_LEV;
reg |= (opts->nrst_standby << 7) & FLASH_OPTCR_nRST_STDBY;
reg |= (opts->nrst_stop << 6) & FLASH_OPTCR_nRST_STOP;
reg |= (opts->nwrpi << 16) & FLASH_OPTCR_nWRP;
reg |= (opts->read_protection << 8) & FLASH_OPTCR_RDP;
reg |= (opts->wdg_sw << 5) & FLASH_OPTCR_WDG_SW;
while (FLASH->SR & FLASH_SR_BSY);
FLASH->OPTCR = reg;
FLASH->OPTCR |= FLASH_OPTCR_OPTSTRT;
__DSB();
while (FLASH->SR & FLASH_SR_BSY);
FLASH->OPTCR |= FLASH_OPTCR_OPTLOCK; FLASH->OPTCR |= FLASH_OPTCR_OPTLOCK;
__DSB();
return 0; return 0;
} }