Add settings module

stm-firmware/Makefile

@@ -34,26 +34,16 @@ DEFINES += -DSHELLMATTA_HELP_ALIAS=\"?\"
 
 # RCC Manager
 CFILES += stm-periph/clock-enable-manager.c
-
 CFILES += stm-periph/uart.c stm-periph/dma-ring-buffer.c
-
 CFILES += digio.c
-
 CFILES += stm-periph/unique-id.c
-
 CFILES += calibration.c
-
 CFILES += temp-converter.c
-
 CFILES += rotary-encoder.c
-
 CFILES += stack-check.c
-
-#CFILES += onewire-temp-sensors.c
-
 CFILES += fatfs/diskio.c fatfs/ff.c fatfs/ffsystem.c fatfs/ffunicode.c fatfs/shimatta_sdio_driver/shimatta_sdio.c
-
 CFILES += pid-controller.c oven-driver.c
+CFILES += settings/settings.c settings-sd-card.c
 
 DEFINES += -DDEBUGBUILD
 

stm-firmware/create-c-file-with-header.py

@@ -2,6 +2,7 @@
 
 import os
 import sys
+import pathlib
 
 license_header = """/* Reflow Oven Controller
 *
@@ -22,7 +23,6 @@ license_header = """/* Reflow Oven Controller
 * along with the reflow oven controller project.
 * If not, see <http://www.gnu.org/licenses/>.
 */
-
 """
 
 project_dir = os.path.dirname(os.path.realpath(__file__))
@@ -37,19 +37,23 @@ cpath = os.path.join(project_dir, sys.argv[1]+'.c')
 hfile = sys.argv[1]+'.h'
 hpath = os.path.join(module_include_dir, hfile)
 
-h_define = '__'+hfile.replace('.', '_').replace('-', '_').upper()+'__'
+h_define = '__'+hfile.replace('.', '_').replace('-', '_').replace('/', '_').upper()+'__'
 
 if os.path.exists(cpath) or os.path.exists(hpath):
 	print("File already exists! Abort!")
 	sys.exit()
 
 print('Creating C file: %s' % (cpath))
+cfile_folder = os.path.dirname(cpath)
+pathlib.Path(cfile_folder).mkdir(parents=True, exist_ok=True)
 with open(cpath, 'x') as f:
 	f.write(license_header)
 	f.write('\n')
 	f.write('#include <%s>' % (os.path.join(include_prefix, hfile)))
 
 print('Creating H file: %s' % (hpath))
+hfile_folder = os.path.dirname(hpath)
+pathlib.Path(hfile_folder).mkdir(parents=True, exist_ok=True)
 with open(hpath, 'x') as f:
 	f.write(license_header)
 	f.write('\n')

stm-firmware/include/reflow-controller/settings/settings-sd-card.h

@@ -0,0 +1,24 @@
+/* Reflow Oven Controller
+*
+* Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+*
+* This file is part of the Reflow Oven Controller Project.
+*
+* The reflow oven controller is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+* The Reflow Oven Control Firmware is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with the reflow oven controller project.
+* If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef __SETTINGS_SETTINGS_SD_CARD_H__
+#define __SETTINGS_SETTINGS_SD_CARD_H__
+
+#endif /* __SETTINGS_SETTINGS_SD_CARD_H__ */

stm-firmware/include/reflow-controller/settings/settings.h

@@ -0,0 +1,25 @@
+/* Reflow Oven Controller
+*
+* Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+*
+* This file is part of the Reflow Oven Controller Project.
+*
+* The reflow oven controller is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+* The Reflow Oven Control Firmware is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with the reflow oven controller project.
+* If not, see <http://www.gnu.org/licenses/>.
+*/
+
+
+#ifndef __SETTINGS_SETTINGS_H__
+#define __SETTINGS_SETTINGS_H__
+
+#endif /* __SETTINGS_SETTINGS_H__ */

stm-firmware/settings/settings-sd-card.c

@@ -0,0 +1,21 @@
+/* Reflow Oven Controller
+*
+* Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+*
+* This file is part of the Reflow Oven Controller Project.
+*
+* The reflow oven controller is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+* The Reflow Oven Control Firmware is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with the reflow oven controller project.
+* If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <reflow-controller/settings/settings-sd-card.h>

stm-firmware/settings/settings.c

@@ -0,0 +1,21 @@
+/* Reflow Oven Controller
+*
+* Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+*
+* This file is part of the Reflow Oven Controller Project.
+*
+* The reflow oven controller is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+* The Reflow Oven Control Firmware is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with the reflow oven controller project.
+* If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <reflow-controller/settings/settings.h>