GUI: About menu: Add '[DEBUG]' text if code is build in debug mode

* Make Systick a 100us Timer. Millisecond ticks are still untouched.
* LCD now has a 100us resolution tick
* LCD uses 500us delay for waitstate
* Make 'About' menu verbose:
	* Add 3 page menu
	* 1st page: Generic info
	* 2nd page: Version info
	* 3rd page: Uptime in seconds

.gitmodules

@@ -5,3 +5,7 @@
 	path = c-style-checker
 	url = https://git.shimatta.de/mhu/c-style-checker.git
 	branch = master
+[submodule "reflow-controller-temp-profile-lang"]
+	path = reflow-controller-temp-profile-lang
+	url = https://git.shimatta.de/mhu/reflow-controller-temp-profile-lang.git
+	branch = master

stm-firmware/Makefile

@@ -5,15 +5,15 @@
 #Add Files and Folders below#########################################################
 CFILES 	= main.c syscalls.c setup/system_stm32f4xx.c systick.c
 ASFILES = boot/startup_stm32f4xx.S
-INCLUDEPATH = -Icmsis -Iinclude
+INCLUDEPATH = -Iinclude
 
-OBJDIR = obj
-target	= reflow-controller
+OBJDIR_BASE = obj
+TARGET_BASE = reflow-controller
 LIBRARYPATH = -L. -Lmathlib
 LIBRARIES = -larm_cortexM4lf_math -lm
 
 DEFINES = -DSTM32F407xx -DSTM32F4XX -DARM_MATH_CM4 -DHSE_VALUE=8000000UL
-mapfile = memory-mapping
+MAPFILE_BASE = memory-mapping
 
 export GIT_VER = $(shell git describe --always --dirty --tags)
 DEFINES += -DGIT_VER=$(GIT_VER)
@@ -41,28 +41,59 @@ CFILES += calibration.c
 CFILES += temp-converter.c
 CFILES += rotary-encoder.c button.c
 CFILES += stack-check.c
-CFILES += ui/lcd.c ui/menu.c lcd-menu.c
+CFILES += ui/lcd.c ui/menu.c reflow-menu.c
 #CFILES += onewire-temp-sensors.c
 CFILES += fatfs/diskio.c fatfs/ff.c fatfs/ffsystem.c fatfs/ffunicode.c fatfs/shimatta_sdio_driver/shimatta_sdio.c
 CFILES += pid-controller.c oven-driver.c
 CFILES += settings/settings.c settings/settings-sd-card.c
 CFILES += safety-adc.c
 
-DEFINES += -DDEBUGBUILD
+DEBUG_DEFINES = -DDEBUGBUILD
+RELEASE_DEFINES = 
 
 ###################################################################################
-CC=arm-none-eabi-gcc
-OBJCOPY=arm-none-eabi-objcopy
-OBJDUMP=arm-none-eabi-objdump
-SIZE=arm-none-eabi-size
+ifeq ($(CROSS_COMPILE),)
+CROSS_COMPILE=arm-none-eabi-
+endif
 
-LFLAGS = -mlittle-endian -mthumb -mcpu=cortex-m4 -mthumb-interwork
+CC=$(CROSS_COMPILE)gcc
+OBJCOPY=$(CROSS_COMPILE)objcopy
+OBJDUMP=$(CROSS_COMPILE)objdump
+SIZE=$(CROSS_COMPILE)size
+
+CFLAGS_RELEASE = -O3 -g
+CFLAGS_DEBUG = -O0 -g
+
+LFLAGS_RELEASE = -Wl,--gc-sections
+LFLAGS_DEBUG =
+
+CFLAGS =
+LFLAGS =
+
+ifneq ($(DEBUGBUILD),true)
+DEFINES += $(RELEASE_DEFINES)
+CFLAGS += $(CFLAGS_RELEASE)
+LFLAGS += $(LFLAGS_RELEASE)
+target = $(TARGET_BASE)-release
+OBJDIR = $(OBJDIR_BASE)/release
+MAPFILE = $(MAPFILE_BASE)-release
+else
+DEFINES += $(DEBUG_DEFINES)
+target = $(TARGET_BASE)-debug
+CFLAGS += $(CFLAGS_DEBUG)
+LFLAGS += $(LFLAGS_DEBUG)
+OBJDIR = $(OBJDIR_BASE)/debug
+MAPFILE = $(MAPFILE_BASE)-debug
+endif
+
+LFLAGS += -mlittle-endian -mthumb -mcpu=cortex-m4 -mthumb-interwork
 LFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 --disable-newlib-supplied-syscalls -nostartfiles
-LFLAGS += -Tstm32f407vet6_flash.ld -Wl,-Map=$(mapfile).map
+LFLAGS += -Tstm32f407vet6_flash.ld -Wl,-Map=$(MAPFILE).map
 
-CFLAGS = -c -mlittle-endian -mthumb -mcpu=cortex-m4 -mthumb-interwork
-CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 -nostartfiles -O0 -g
+CFLAGS += -c -mlittle-endian -mthumb -mcpu=cortex-m4 -mthumb-interwork
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 -nostartfiles
 CFLAGS += -Wall -Wextra -Wold-style-declaration -Wuninitialized -Wmaybe-uninitialized -Wunused-parameter -Wimplicit-fallthrough=3 -Wsign-compare
+
 ####################################################################################
 
 OBJ = $(CFILES:%.c=$(OBJDIR)/%.c.o)
@@ -70,6 +101,14 @@ ASOBJ += $(ASFILES:%.S=$(OBJDIR)/%.S.o)
 
 default: $(target).elf
 
+all: debug release
+
+release:
+	$(QUIET)$(MAKE) DEBUGBUILD=false
+
+debug:
+	$(QUIET)$(MAKE) DEBUGBUILD=true
+
 %.bin: %.elf
 	$(QUIET)$(OBJCOPY) -O binary $^ $@
 %.hex: %.elf
@@ -95,7 +134,10 @@ $(ASOBJ):
 	$(QUIET)$(CC) $(CFLAGS) -MMD -MT $@ $(INCLUDEPATH) $(DEFINES) -o $@ $(@:$(OBJDIR)/%.S.o=%.S)
 
 
-.PHONY: qtproject clean mrproper objcopy disassemble program
+.PHONY: qtproject-legacy qtproject qtproject-debug clean mrproper objcopy disassemble program program-debug
+
+program-debug:
+	$(QUIET)$(MAKE) DEBUGBUILD=true program
 
 program: $(target).elf
 	./program-device.sh $<
@@ -106,14 +148,23 @@ disassemble: $(target).elf
 objcopy: $(target).bin $(target).hex
 
 mrproper: clean
-	$(QUIET)rm -f $(target).pro
+	@echo "Purging project files..."
+	$(QUIET)rm -f $(target).pro $(target).creator $(target).files $(target).cflags $(target).cxxflags $(target).includes $(target).config
 
 clean:
-	@echo "Cleaning up derived files..."
+	@echo -n "Cleaning up derived files for "
+ifneq ($(DEBUGBUILD),true)
+	@echo "RELEASE build"
+else
+	@echo "DEBUG build"
+endif
 	$(QUIET)rm -f $(target).elf $(target).bin $(target).hex $(OBJ) $(ASOBJ) $(mapfile).map $(CFILES:%.c=$(OBJDIR)/%.c.d) $(ASFILES:%.S=$(OBJDIR)/%.S.d) 
 	$(QUIET)rm -rf $(OBJDIR)/*
+ifneq ($(DEBUGBUILD),true)
+	$(QUIET)$(MAKE) DEBUGBUILD=true clean
+endif
 
-qtproject:
+qtproject-legacy:
 	echo -e "TEMPLATE = app\nCONFIG -= console app_bundle qt" > $(target).pro
 	echo -e "SOURCES += $(CFILES) $(ASFILES)" >> $(target).pro
 	echo -ne "INCLUDEPATH += " >> $(target).pro
@@ -123,4 +174,26 @@ qtproject:
 	echo -ne "\nDEFINES += " >> $(target).pro
 	echo "$(DEFINES)" | sed "s/-D//g" >> $(target).pro
 
+qtproject-debug:
+	@echo "Generating debug build project"
+	$(QUIET)$(MAKE) DEBUGBUILD=true qtproject
+
+qtproject:
+	$(QUIET)rm -f $(target).files $(target).cflags $(target).config $(target).creator $(target).includes $(target).creator.user
+	@echo "Generating source file list"
+	$(QUIET)echo "$(CFILES)" | tr ' ' '\n' > $(target).files
+	@echo -n "Appending found header files from folders "
+	@echo `echo $(INCLUDEPATH) | sed "s/-I//g"`
+	$(QUIET)for dir in `echo $(INCLUDEPATH) | sed "s/-I//g"`; do \
+		find `echo "$${dir}"` -name "*.h" >> $(target).files; \
+	done
+	@echo "Generating $(target).cflags"
+	$(QUIET)echo "" > $(target).cflags
+	@echo "Generating $(target).includes"
+	$(QUIET)echo $(INCLUDEPATH) | sed "s/-I/,/g" | tr , '\n' | sed "/^$$/d" > $(target).includes;
+	@echo "Generating $(target).config"
+	$(QUIET)echo $(DEFINES) | sed "s/-D/,#define /g" | tr , '\n' | sed "/^$$/d" > $(target).config
+	@echo "Generating $(target).creator"
+	$(QUIET)echo "[GENERAL]" > $(target).creator
+
 -include $(CFILES:%.c=$(OBJDIR)/%.c.d) $(ASFILES:%.S=$(OBJDIR)/%.S.d)

stm-firmware/fatfs/shimatta_sdio_driver/shimatta_sdio.c

@@ -238,6 +238,8 @@ static int sdio_check_status_register_cmd13(uint16_t rca, uint32_t *status)
 	uint32_t response;
 	int res;
 
+	*status = 0UL;
+
 	do {
 		sdio_send_cmd(13, (rca<<16)&0xFFFF0000, SHORT_ANS);
 		if (!(res = sdio_get_response(13, SHORT_ANS, &response))) {
@@ -465,10 +467,14 @@ static int sdio_send_select_card_cmd7(uint16_t rca) {
 	} while(--timeout > 0);
 
 	/* Check, if card in in TRANS state */
-	if (sdio_check_status_register_cmd13(rca, &(status.value)))
+	if (sdio_check_status_register_cmd13(rca, &status.value)) {
 		res = -1;
+		goto ret_val;	
+	}
 	if (status.statusstruct.CURRENT_STATE != CURRENT_STATE_TRAN)
 		res = -2;
+
+ret_val:
 	return res;
 }
 
@@ -705,9 +711,10 @@ DRESULT sdio_disk_write(const BYTE *buff, DWORD sector, UINT count)
 
 	while (count) {
 		do {
-			sdio_check_status_register_cmd13(card_info.rca, &status.value);
+			ret = sdio_check_status_register_cmd13(card_info.rca, &status.value);
 		} while (status.statusstruct.CURRENT_STATE == CURRENT_STATE_PRG ||
-			 status.statusstruct.CURRENT_STATE == CURRENT_STATE_RCV);
+			 status.statusstruct.CURRENT_STATE == CURRENT_STATE_RCV ||
+			 !ret);
 
 		if (status.statusstruct.CURRENT_STATE == CURRENT_STATE_STBY) {
 			if (sdio_send_select_card_cmd7(card_info.rca))

stm-firmware/include/reflow-controller/oven-driver.h

@@ -22,6 +22,35 @@
 #define __OVEN_DRIVER_H__
 
 #include <stdint.h>
+#include <stdbool.h>
+#include <reflow-controller/pid-controller.h>
+
+enum oven_pid_error_report {
+	OVEN_PID_NO_ERROR = 0,
+	OVEN_PID_ERR_PT1000_ADC_WATCHDOG = (1<<0),
+	OVEN_PID_ERR_PT1000_ADC_OFF = (1<<1),
+	OVEN_PID_ERR_PT1000_OTHER = (1<<2),
+	OVEN_PID_ERR_VREF_TOL = (1<<3),
+	OVEN_PID_ERR_OVERTEMP = (1<<4),
+};
+
+struct oven_pid_errors {
+	bool generic_error;
+	bool pt1000_adc_watchdog;
+	bool pt1000_adc_off;
+	bool pt1000_other;
+	bool vref_tol;
+	bool controller_overtemp;
+};
+
+struct oven_pid_status {
+	bool active;
+	bool error_set;
+	struct oven_pid_errors error_flags;
+	float target_temp;
+	float current_temp;
+	uint64_t timestamp_last_run;
+};
 
 void oven_driver_init(void);
 
@@ -29,4 +58,16 @@ void oven_driver_set_power(uint8_t power);
 
 void oven_driver_disable(void);
 
+void oven_pid_ack_errors(void);
+
+void oven_pid_init(struct pid_controller *controller_to_copy);
+
+void oven_pid_handle(float target_temp);
+
+void oven_pid_stop();
+
+void oven_pid_report_error(enum oven_pid_error_report report);
+
+const struct oven_pid_status *oven_pid_get_status(void);
+
 #endif /* __OVEN_DRIVER_H__ */

stm-firmware/include/reflow-controller/pid-controller.h

@@ -45,4 +45,6 @@ float pid_sample(struct pid_controller *pid, float deviation);
 
 float pid_get_control_output(const struct pid_controller *pid);
 
+int pid_copy(struct pid_controller *dest, const struct pid_controller *src);
+
 #endif /* __PID_CONTROLLER_H__ */

stm-firmware/include/reflow-controller/reflow-menu.h

@@ -18,7 +18,15 @@
 * If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef __LCD_MENU_H__
-#define __LCD_MENU_H__
+#ifndef __REFLOW_MENU_H__
+#define __REFLOW_MENU_H__
 
-#endif /* __LCD_MENU_H__ */
+/**
+ * @brief Handle the reflow controller's LCD Menu
+ * @return 0 if no delay is requested, 1 if delay is requested
+ */
+int reflow_menu_handle(void);
+
+void reflow_menu_init(void);
+
+#endif /* __REFLOW_MENU_H__ */

stm-firmware/include/reflow-controller/rotary-encoder.h

@@ -39,4 +39,6 @@ int32_t rotary_encoder_get_change_val(void);
 
 void rotary_encoder_stop(void);
 
+void rotary_encoder_zero(void);
+
 #endif /* __ROTARY_ENCODER_H__ */

stm-firmware/include/reflow-controller/safety-adc.h

@@ -24,11 +24,10 @@
 #include <stdint.h>
 #include <stdbool.h>
 
-#define SAFETY_ADC_FRAC_BITS (8)
-#define SAFETY_ADC_VREF_VOLT (2.5)
-#define SAFETY_ADC_VREF_TOL (0.25)
-#define SAFETY_ADC_VREF_INT ()
-
+#define SAFETY_ADC_VREF_MVOLT (2500.0f)
+#define SAFETY_ADC_VREF_TOL_MVOLT (100.0f)
+#define SAFETY_ADC_TEMP_LOW_LIM (0.0f)
+#define SAFETY_ADC_TEMP_HIGH_LIM (65.0f)
 
 enum safety_adc_meas_channel {SAFETY_ADC_MEAS_VREF, SAFETY_ADC_MEAS_TEMP};
 enum safety_adc_check_result {
@@ -40,6 +39,12 @@ enum safety_adc_check_result {
 				SAFETY_ADC_INTERNAL_ERROR = (1U<<4),
 				};
 
+extern enum safety_adc_check_result global_safety_adc_status;
+
+enum safety_adc_check_result safety_adc_get_errors();
+
+void safety_adc_clear_errors(void);
+
 void safety_adc_init();
 
 void safety_adc_deinit();

stm-firmware/include/reflow-controller/systick.h

@@ -32,9 +32,9 @@
  * @brief Reload value for the systick timer.
  *
  * This value has to be configured to set the systick to a one milliscond tick interval
- * The default value is 168000, which results in a 1ms tick for 168 MHz CPU speed
+ * The default value is 16800, which results in a 100us tick for 168 MHz CPU speed
  */
-#define SYSTICK_RELOAD (168000UL)
+#define SYSTICK_RELOAD (16800UL)
 
 /**
  * @brief Variable used by the systick_wait_ms function
@@ -49,6 +49,11 @@ extern volatile uint32_t wait_tick_ms;
  */
 extern volatile uint64_t global_tick_ms;
 
+/**
+ * @brief Wait counter for the display. This must not be used anywhere else
+ */
+extern volatile uint32_t lcd_tick_100us;
+
 /**
  * @brief Setup the Systick timer to generate a 1 ms tick
  */
@@ -66,6 +71,8 @@ void systick_wait_ms(uint32_t ms);
 
 uint64_t systick_get_global_tick();
 
+void systick_get_uptime_from_tick(uint32_t *days, uint32_t *hours, uint32_t *minutes, uint32_t *seconds);
+
 bool systick_ticks_have_passed(uint64_t start_timestamp, uint64_t ticks);
 
 #endif /* __SYSTICK_H__ */

stm-firmware/include/reflow-controller/ui/lcd.h

@@ -36,6 +36,10 @@
 #define LCD_CHAR_WIDTH 16
 #define LCD_ROW_COUNT 4
 
+#define LCD_SHIMATTA_STRING "\xBC\xCF\xAF\xC0"
+#define LCD_DEGREE_SYMBOL_STRING "\xDF"
+#define LCD_DEGREE_SYMBOL_CHAR '\xDF'
+
 enum lcd_fsm_ret {LCD_FSM_NOP, LCD_FSM_CALL_AGAIN, LCD_FSM_WAIT_CALL};
 
 void lcd_init(void);

stm-firmware/include/reflow-controller/ui/menu.h

@@ -24,17 +24,16 @@
 #include <stdint.h>
 #include <reflow-controller/button.h>
 #include <stdbool.h>
-#include <reflow-controller/ui/lcd.h>
 
 struct lcd_menu;
 
 enum menu_entry_func_entry {MENU_ENTRY_FIRST_ENTER, MENU_ENTRY_CONTINUE, MENU_ENTRY_DROPBACK};
 
-typedef enum menu_func_ret_t (*menu_func_t)(struct lcd_menu *menu, enum menu_entry_func_entry entry_type,
+typedef void (*menu_func_t)(struct lcd_menu *menu, enum menu_entry_func_entry entry_type,
 					    void *parent);
 
 struct menu_inputs {
-	uint16_t rotary_encoder_val;
+	int16_t rotary_encoder_delta;
 	enum button_state push_button;
 };
 
@@ -42,26 +41,47 @@ struct lcd_menu {
 	menu_func_t active_entry;
 	menu_func_t root_entry;
 	enum menu_entry_func_entry active_entry_type;
+	menu_func_t init_parent;
 	struct menu_inputs inputs;
-	char lcd_buffer[LCD_ROW_COUNT][21];
+	void (*update_display)(uint8_t row, const char *data);
 };
 
 struct menu_list {
-	const char **entry_names;
+	void (*update_display)(uint8_t row, const char *data);
+	const char * const * entry_names;
+	uint32_t entry_count;
 	uint32_t currently_selected;
 	const menu_func_t *submenu_list;
 };
 
-void menu_handle(struct lcd_menu *menu, uint16_t rotary_encoder_value, enum button_state push_button);
+void menu_handle(struct lcd_menu *menu, int16_t rotary_encoder_delta, enum button_state push_button);
 
-void menu_init(struct lcd_menu *menu, menu_func_t root_node);
+void menu_init(struct lcd_menu *menu, menu_func_t root_node, void (*display_update)(uint8_t row, const char *data));
+
+void menu_ack_rotary_delta(struct lcd_menu *menu);
+
+void menu_display_clear(struct lcd_menu *menu);
 
 void menu_entry_dropback(struct lcd_menu *menu, menu_func_t parent_func);
 
-void menu_entry_enter(struct lcd_menu *menu, menu_func_t parent_func, bool handle_immediately);
+void menu_entry_enter(struct lcd_menu *menu, menu_func_t entry, bool handle_immediately);
 
-void menu_override_lcd_output(uint8_t row_num, char *text);
+void menu_lcd_output(struct lcd_menu *menu, uint8_t row_num, const char *text);
 
-void menu_list_display(struct menu_list *list, uint8_t top_row, uint8_t bottom_row);
+void menu_lcd_outputf(struct lcd_menu *menu, uint8_t row_num, const char *format, ...);
+
+void menu_list_display(struct menu_list *list, uint32_t top_row, uint32_t bottom_row);
+
+int16_t menu_get_rotary_delta(const struct lcd_menu *menu);
+
+enum button_state menu_get_button_state(const struct lcd_menu *menu);
+
+void menu_list_compute_count(struct menu_list *list);
+
+void menu_list_scroll_down(struct menu_list *list);
+
+void menu_list_scroll_up(struct menu_list *list);
+
+void menu_list_enter_selected_entry(struct menu_list *list, struct lcd_menu *menu);
 
 #endif /* __MENU_H__ */

stm-firmware/lcd-menu.c

@@ -1,21 +0,0 @@
-/* Reflow Oven Controller
-*
-* Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
-*
-* This file is part of the Reflow Oven Controller Project.
-*
-* The reflow oven controller is free software: you can redistribute it and/or modify
-* it under the terms of the GNU General Public License version 2 as
-* published by the Free Software Foundation.
-*
-* The Reflow Oven Control Firmware is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with the reflow oven controller project.
-* If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <reflow-controller/lcd-menu.h>

stm-firmware/main.c

@@ -34,23 +34,20 @@
 #include <reflow-controller/systick.h>
 #include <reflow-controller/adc-meas.h>
 #include <reflow-controller/shell.h>
-#include <reflow-controller/ui/lcd.h>
 #include <reflow-controller/digio.h>
 #include "fatfs/shimatta_sdio_driver/shimatta_sdio.h"
-#include <reflow-controller/temp-converter.h>
-#include <reflow-controller/rotary-encoder.h>
-#include <reflow-controller/pid-controller.h>
 #include <stm-periph/stm32-gpio-macros.h>
 #include <stm-periph/clock-enable-manager.h>
 #include <stm-periph/uart.h>
 #include <reflow-controller/shell-uart-config.h>
-#include <helper-macros/helper-macros.h>
-#include <reflow-controller/button.h>
 #include <reflow-controller/oven-driver.h>
 #include <reflow-controller/safety-adc.h>
 #include <fatfs/ff.h>
+#include <reflow-controller/reflow-menu.h>
 
-static void setup_nvic_priorities()
+bool global_error_state;
+
+static void setup_nvic_priorities(void)
 {
 	/* No sub priorities */
 	NVIC_SetPriorityGrouping(2);
@@ -61,18 +58,10 @@ static void setup_nvic_priorities()
 	NVIC_SetPriority(DMA2_Stream7_IRQn, 3);
 }
 
-/* Process parameters are defined static globally to be watched in debugger from any context */
-static float pt1000_value;
-static volatile int pt1000_value_status;
-static uint32_t rot;
-static float target_temperature;
-static struct pid_controller pid;
-static volatile enum button_state button;
-
 FATFS fs;
-FATFS *fs_ptr = &fs;
+FATFS * const fs_ptr = &fs;
 
-static inline void uart_gpio_config()
+static inline void uart_gpio_config(void)
 {
 	/*
 	 * In case the application is build in debug mode, use the TX/RX Pins on the debug header
@@ -99,7 +88,7 @@ static shellmatta_retCode_t write_shell_callback(const char *data, uint32_t len)
 	return SHELLMATTA_OK;
 }
 
-static inline void setup_sell_uart(struct stm_uart *uart)
+static inline void setup_shell_uart(struct stm_uart *uart)
 {
 	uart->rx = 1;
 	uart->tx = 1;
@@ -132,30 +121,16 @@ static bool mount_sd_card_if_avail(bool mounted)
 
 	if (!sdio_check_inserted() && !mounted) {
 		res = f_mount(fs_ptr, "0:/", 1);
-		if (res == FR_OK) {
+		if (res == FR_OK)
 			return true;
-		} else {
+		else
 			return false;
-		}
 	}
 
 	return mounted;
 }
 
-static inline int32_t handle_pid_controller(struct pid_controller *pid, float target_temperature,
-					    float current_temperature)
-{
-	int32_t pid_out;
-
-	pid_out = (int32_t)pid_sample(pid, target_temperature - current_temperature);
-
-	/* Blink green LED */
-	led_set(1, !led_get(1));
-
-	return pid_out;
-}
-
-static void setup_unused_pins()
+static void setup_unused_pins(void)
 {
 	int i;
 
@@ -165,7 +140,7 @@ static void setup_unused_pins()
 		GPIOE->PUPDR |= PULLDOWN(i);
 }
 
-static inline void setup_system()
+static inline void setup_system(void)
 {
 	setup_nvic_priorities();
 	systick_setup();
@@ -175,13 +150,11 @@ static inline void setup_system()
 	digio_setup_default_all();
 	led_setup();
 	loudspeaker_setup();
-	rotary_encoder_setup();
-	button_init();
-	lcd_init();
+	reflow_menu_init();
 	safety_adc_init();
 
 	uart_gpio_config();
-	setup_sell_uart(&shell_uart);
+	setup_shell_uart(&shell_uart);
 
 	setup_unused_pins();
 }
@@ -192,103 +165,101 @@ static void handle_shell_uart_input(shellmatta_handle_t shell_handle)
 	const char *uart_input;
 	size_t uart_input_len;
 
-	/* Handle uart input for shell */
+	/* Handle UART input for shell */
 	uart_receive_status = uart_receive_data_with_dma(&shell_uart, &uart_input, &uart_input_len);
 	if (uart_receive_status >= 0)
 		shell_handle_input(shell_handle, uart_input, uart_input_len);
 }
 
+static void zero_ccm_ram(void)
+{
+	/* These extern variables are placed in the linker script */
+	extern char _sccmram;
+	extern char _eccmram;
+	uint32_t len;
+	uint32_t i;
+	uint32_t *ptr = (uint32_t *)&_sccmram;
 
+	len = (uint32_t)&_eccmram - (uint32_t)&_sccmram;
+	for (i = 0; i < len; i++)
+		ptr[i] = 0UL;
+}
 
-int main()
+/**
+ * @brief This function sets the appropriate error flags in the oven PID controller
+ * depending on the Safety ADC measurements.
+ * The PID controller's error flags have to be cleared via the GUI by either starting a new RUN or explicitly
+ * ack'ing these errors.
+ */
+static void propagate_safety_adc_error_to_oven_pid(void)
+{
+	enum safety_adc_check_result safety_adc_result;
+
+	safety_adc_result = safety_adc_get_errors();
+
+	if (safety_adc_result & SAFETY_ADC_CHECK_TEMP_LOW ||
+	    safety_adc_result & SAFETY_ADC_CHECK_TEMP_HIGH)
+		oven_pid_report_error(OVEN_PID_ERR_OVERTEMP);
+
+	if (safety_adc_result & SAFETY_ADC_CHECK_VREF_LOW ||
+	    safety_adc_result & SAFETY_ADC_CHECK_VREF_HIGH)
+		oven_pid_report_error(OVEN_PID_ERR_VREF_TOL);
+
+	if (safety_adc_result & SAFETY_ADC_INTERNAL_ERROR)
+		oven_pid_report_error(0);
+}
+
+int main(void)
 {
 	bool sd_card_mounted = false;
 	shellmatta_handle_t shell_handle;
+	int menu_wait_request;
+	uint64_t quarter_sec_timestamp = 0ULL;
+	const struct oven_pid_status *pid_status;
+	enum adc_pt1000_error pt1000_status;
 
-	uint64_t pid_timestamp = 0ULL;
-	bool pid_controller_active = false;
-	int32_t pid_controller_output;
-	uint64_t display_timestamp = 0ULL;
-	char disp[4][21] = {0};
-	enum lcd_fsm_ret lcd_ret = LCD_FSM_NOP;
-	int temp_status;
-	float current_temp;
-
-	target_temperature = 25.0f;
-
+	zero_ccm_ram();
 	setup_system();
 
+	global_error_state = false;
+
 	shell_handle = shell_init(write_shell_callback);
 	shell_print_motd(shell_handle);
 
-	pid_init(&pid, 0.1, 0.1, 4.0, 0.0, 100.0, 40.0, 0.25);
-	pid_zero(&pid);
-
 	while (1) {
 		sd_card_mounted = mount_sd_card_if_avail(sd_card_mounted);
 
-		snprintf(&disp[0][0], 17, "SD %smounted", sd_card_mounted ? "" : "un");
+		pid_status = oven_pid_get_status();
 
-		pt1000_value_status = adc_pt1000_get_current_resistance(&pt1000_value);
-
-		if (systick_ticks_have_passed(pid_timestamp, 250)) {
+		if (systick_ticks_have_passed(quarter_sec_timestamp, 250)) {
+			quarter_sec_timestamp = systick_get_global_tick();
 
 			(void)handle_safety_adc();
+			propagate_safety_adc_error_to_oven_pid();
 
-			pid_timestamp = systick_get_global_tick();
-
-			temp_status = temp_converter_convert_resistance_to_temp(pt1000_value,
-										&current_temp);
-
-			if (pt1000_value_status >= 0 && pid_controller_active)
-				pid_controller_output = handle_pid_controller(&pid, target_temperature, current_temp);
-
-			/* Blink red led in case of temp error */
-			if (pt1000_value_status < 0)
+			if (global_error_state)
 				led_set(0, !led_get(0));
 			else
 				led_set(0, 0);
-
-			snprintf(&disp[3][0], 17, "Temp: %s%.1f C", (temp_status == 0 ? "" : temp_status < 0 ? "<" : ">")
-					, current_temp);
 		}
 
-		/* Handle error in case PID controller should be active, but temperature measurement failed */
-		if (pid_controller_active && pt1000_value_status < 0) {
-			/* Disable the oven controller */
+		pt1000_status = adc_pt1000_check_error();
+		global_error_state = pid_status->error_set || !!safety_adc_get_errors() || !!pt1000_status;
+
+		menu_wait_request = reflow_menu_handle();
+
+		/* Deactivate oven output in case of error! */
+		if (!pid_status->active || global_error_state)
 			oven_driver_set_power(0U);
 
-			/* Activate loundspeaker permanently */
-			loudspeaker_set(100);
-		} else if (pid_controller_active) {
-			/* In case temperature measurement is okay and controlelr is working, write output power */
-			oven_driver_set_power(pid_controller_output < 0 ? 0U : (uint8_t)pid_controller_output);
-		}
-
-		button = button_read_event();
-		rot = rotary_encoder_get_abs_val();
-
-		oven_driver_set_power(rot > 100U ? 100U : rot);
-
-
-		/* TODO: handle gui */
-		snprintf(&disp[1][0], 17, "Rotary: %u", (unsigned int)rot);
-		snprintf(&disp[2][0], 17, "Button: %s", (button == BUTTON_SHORT ? "SHORT" : (button == BUTTON_LONG ? "LONG" : "")));
-
 		handle_shell_uart_input(shell_handle);
 
-		if (systick_ticks_have_passed(display_timestamp, 2) || lcd_ret == LCD_FSM_CALL_AGAIN) {
-			lcd_ret = lcd_fsm_write_buffer(disp);
-			display_timestamp = systick_get_global_tick();
-		}
-
-		if (lcd_ret == LCD_FSM_CALL_AGAIN) {
-			/* Nothing */
-		} else {
+		if (menu_wait_request)
 			__WFI();
-		}
+
 	}
 
+	return 0;
 }
 
 void sdio_wait_ms(uint32_t ms)
@@ -296,12 +267,12 @@ void sdio_wait_ms(uint32_t ms)
 	systick_wait_ms(ms);
 }
 
-void DMA2_Stream7_IRQHandler()
+void DMA2_Stream7_IRQHandler(void)
 {
 	uint32_t hisr = DMA2->HISR;
+
 	DMA2->HIFCR = hisr;
 
-	if (hisr & DMA_HISR_TCIF7) {
+	if (hisr & DMA_HISR_TCIF7)
 		uart_tx_dma_complete_int_callback(&shell_uart);
-	}
 }

stm-firmware/oven-driver.c

@@ -21,6 +21,19 @@
 #include <reflow-controller/oven-driver.h>
 #include <reflow-controller/periph-config/oven-driver-hwcfg.h>
 #include <stm-periph/clock-enable-manager.h>
+#include <reflow-controller/systick.h>
+#include <reflow-controller/adc-meas.h>
+#include <reflow-controller/temp-converter.h>
+
+static struct pid_controller oven_pid;
+
+static struct oven_pid_status oven_pid_current_status = {
+	.active = false,
+	.error_set = false,
+	.target_temp = 0.0f,
+	.current_temp = 0.0f,
+	.timestamp_last_run = 0ULL
+};
 
 void oven_driver_init()
 {
@@ -57,3 +70,94 @@ void oven_driver_disable()
 	rcc_manager_disable_clock(&RCC->AHB1ENR, BITMASK_TO_BITNO(OVEN_CONTROLLER_PORT_RCC_MASK));
 	rcc_manager_disable_clock(&RCC->APB1ENR, BITMASK_TO_BITNO(OVEN_CONTROLLER_TIM_RCC_MASK));
 }
+
+void oven_pid_ack_errors(void)
+{
+	oven_pid_current_status.error_set = false;
+	oven_pid_current_status.error_flags.vref_tol = false;
+	oven_pid_current_status.error_flags.pt1000_other = false;
+	oven_pid_current_status.error_flags.generic_error = false;
+	oven_pid_current_status.error_flags.pt1000_adc_off = false;
+	oven_pid_current_status.error_flags.controller_overtemp = false;
+	oven_pid_current_status.error_flags.pt1000_adc_watchdog = false;
+}
+
+void oven_pid_init(struct pid_controller *controller_to_copy)
+{
+	pid_copy(&oven_pid, controller_to_copy);
+	oven_pid.output_sat_min = 0.0f;
+	oven_pid.output_sat_max = 100.0f;
+	oven_pid_current_status.timestamp_last_run = 0ULL;
+	oven_pid_current_status.active = true;
+	oven_pid_ack_errors();
+}
+
+void oven_pid_handle(float target_temp)
+{
+	float pid_out;
+	float current_temp;
+	int resistance_status;
+	enum adc_pt1000_error pt1000_error;
+
+	if (oven_pid_current_status.active && !oven_pid_current_status.error_set) {
+		if (systick_ticks_have_passed(oven_pid_current_status.timestamp_last_run,
+					      (uint64_t)(oven_pid.sample_period * 1000))) {
+
+			resistance_status = adc_pt1000_get_current_resistance(&current_temp);
+			if (resistance_status < 0) {
+				oven_driver_set_power(0);
+				pt1000_error = adc_pt1000_check_error();
+				if (pt1000_error & ADC_PT1000_WATCHDOG_ERROR)
+					oven_pid_report_error(OVEN_PID_ERR_PT1000_ADC_WATCHDOG);
+				if (pt1000_error & ADC_PT1000_INACTIVE)
+					oven_pid_report_error(OVEN_PID_ERR_PT1000_ADC_OFF);
+				if (pt1000_error & ADC_PT1000_OVERFLOW)
+					oven_pid_report_error(OVEN_PID_ERR_PT1000_OTHER);
+
+				return;
+			}
+
+			(void)temp_converter_convert_resistance_to_temp(current_temp, &current_temp);
+
+			pid_out = pid_sample(&oven_pid, target_temp - current_temp);
+			oven_driver_set_power((uint8_t)pid_out);
+			oven_pid_current_status.timestamp_last_run = systick_get_global_tick();
+			oven_pid_current_status.target_temp = target_temp;
+			oven_pid_current_status.current_temp = current_temp;
+		}
+	}
+}
+
+void oven_pid_report_error(enum oven_pid_error_report report)
+{
+	struct oven_pid_errors *e = &oven_pid_current_status.error_flags;
+
+	oven_pid_current_status.active = false;
+	oven_pid_current_status.error_set = true;
+
+	if (report == 0) {
+		e->generic_error = true;
+	}
+	if (report & OVEN_PID_ERR_OVERTEMP)
+		e->controller_overtemp = true;
+	if (report & OVEN_PID_ERR_VREF_TOL)
+		e->controller_overtemp = true;
+	if (report & OVEN_PID_ERR_PT1000_OTHER)
+		e->pt1000_other = true;
+	if (report & OVEN_PID_ERR_PT1000_ADC_OFF)
+		e->pt1000_adc_off = true;
+	if (report & OVEN_PID_ERR_PT1000_ADC_WATCHDOG)
+		e->pt1000_adc_watchdog = true;
+}
+
+const struct oven_pid_status *oven_pid_get_status()
+{
+	return &oven_pid_current_status;
+}
+
+void oven_pid_stop()
+{
+	oven_pid_current_status.active = false;
+	oven_pid_current_status.target_temp = 0.0f;
+	oven_pid_current_status.current_temp = 0.0f;
+}

stm-firmware/pid-controller.c

@@ -19,6 +19,7 @@
 */
 
 #include <reflow-controller/pid-controller.h>
+#include <string.h>
 
 void pid_init(struct pid_controller *pid, float k_deriv, float k_int, float k_p, float output_sat_min, float output_sat_max, float integral_max, float sample_period)
 {
@@ -29,7 +30,7 @@ void pid_init(struct pid_controller *pid, float k_deriv, float k_int, float k_p,
 	pid->k_p = k_p;
 	pid->k_int = k_int;
 	pid->k_deriv = k_deriv;
-	pid->k_int_t = pid->k_int * pid->sample_period / 2.0f;
+	pid->k_int_t = pid->k_int * pid->sample_period * 0.5f;
 	pid->k_deriv_t = pid->k_deriv * 2.0f / pid->sample_period;
 	pid->output_sat_max = output_sat_max;
 	pid->output_sat_min = output_sat_min;
@@ -38,6 +39,16 @@ void pid_init(struct pid_controller *pid, float k_deriv, float k_int, float k_p,
 	pid_zero(pid);
 }
 
+int pid_copy(struct pid_controller *dest, const struct pid_controller *src)
+{
+	if (!dest || !src)
+		return -1;
+
+	memcpy(dest, src, sizeof(struct pid_controller));
+
+	return 0;
+}
+
 void pid_zero(struct pid_controller *pid)
 {
 	pid->control_output = 0.0f;

stm-firmware/reflow-menu.c

@@ -0,0 +1,285 @@
+/* Reflow Oven Controller
+*
+* Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+*
+* This file is part of the Reflow Oven Controller Project.
+*
+* The reflow oven controller is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+* The Reflow Oven Control Firmware is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with the reflow oven controller project.
+* If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <reflow-controller/reflow-menu.h>
+#include <reflow-controller/ui/menu.h>
+#include <reflow-controller/ui/lcd.h>
+#include <reflow-controller/rotary-encoder.h>
+#include <reflow-controller/systick.h>
+#include <reflow-controller/adc-meas.h>
+#include <reflow-controller/safety-adc.h>
+#include <reflow-controller/temp-converter.h>
+#include <helper-macros/helper-macros.h>
+#include <stm-periph/unique-id.h>
+#include <stddef.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <string.h>
+#include <inttypes.h>
+
+static char __attribute__((section(".ccmram"))) display_buffer[4][21] = {0};
+static struct lcd_menu reflow_menu;
+static struct lcd_menu * const reflow_menu_ptr = &reflow_menu;
+
+static void update_display_buffer(uint8_t row, const char *data)
+{
+	int i;
+
+	if (row > 4)
+		return;
+	if (!data)
+		return;
+
+	for (i = 0; data[i] && i < LCD_CHAR_WIDTH; i++) {
+		display_buffer[row][i] = data[i];
+	}
+
+	display_buffer[row][i] = 0;
+}
+
+static void reflow_menu_monitor(struct lcd_menu *menu, enum menu_entry_func_entry entry_type, void *parent)
+{
+	static void *my_parent;
+	static uint64_t my_timestamp = 0;
+	char line[17];
+	float tmp;
+	int res;
+	const char *prefix;
+
+	if (entry_type == MENU_ENTRY_FIRST_ENTER) {
+		my_parent = parent;
+		menu_display_clear(menu);
+	}
+
+	if (systick_ticks_have_passed(my_timestamp, 250)) {
+		my_timestamp = systick_get_global_tick();
+		adc_pt1000_get_current_resistance(&tmp);
+		snprintf(line, sizeof(line), "Res: %.1f", tmp);
+		menu->update_display(0, line);
+
+		res = temp_converter_convert_resistance_to_temp(tmp, &tmp);
+		switch (res) {
+		case -1:
+			prefix = "<";
+			break;
+		case 1:
+			prefix = ">";
+			break;
+		default:
+			prefix = "";
+			break;
+		}
+
+		snprintf(line, sizeof(line), "Temp: %s%.1f " LCD_DEGREE_SYMBOL_STRING "C", prefix, tmp);
+		menu->update_display(1, line);
+
+		tmp = safety_adc_get_temp();
+		snprintf(line, sizeof(line), "Tj: %.1f " LCD_DEGREE_SYMBOL_STRING "C", tmp);
+		menu->update_display(2, line);
+
+		tmp = safety_adc_get_vref();
+		snprintf(line, sizeof(line), "Vref: %.1f mV", tmp);
+		menu->update_display(3, line);
+	}
+
+	if (menu->inputs.push_button == BUTTON_SHORT_RELEASED || menu->inputs.push_button == BUTTON_LONG) {
+		menu_entry_dropback(menu, my_parent);
+	}
+}
+
+static void reflow_menu_about(struct lcd_menu *menu, enum menu_entry_func_entry entry_type, void *parent)
+{
+	static void *my_parent;
+	static bool button_ready;
+	static int page = 0;
+	static uint32_t uptime_secs;
+	uint32_t new_uptime_secs;
+	uint32_t uptime_mins;
+	uint32_t uptime_hours;
+	uint32_t uptime_days;
+	int16_t rot_delta;
+	uint32_t ser1, ser2, ser3;
+	enum button_state push_button;
+
+	if (entry_type == MENU_ENTRY_FIRST_ENTER) {
+		uptime_secs = 0ULL;
+		page = 0;
+		my_parent = parent;
+		button_ready = false;
+		menu_display_clear(menu);
+		menu_ack_rotary_delta(menu);
+	}
+
+	rot_delta = menu_get_rotary_delta(menu);
+	if (rot_delta >= 4) {
+		menu_ack_rotary_delta(menu);
+		if (page < 4) {
+			page++;
+			menu_display_clear(menu);
+		}
+	} else if (rot_delta <= -4) {
+		menu_ack_rotary_delta(menu);
+		if (page > 0) {
+			page--;
+			menu_display_clear(menu);
+		}
+	}
+
+	switch (page) {
+	case 0:
+		menu_lcd_output(menu, 0, LCD_SHIMATTA_STRING "    Shimatta");
+		menu_lcd_output(menu, 1, "Oven Controller");
+		menu_lcd_output(menu, 2, "(c) Mario H\xF5ttel");
+		menu_lcd_output(menu, 3, "Page 1/5");
+		break;
+	case 1:
+		menu_lcd_output(menu, 0, "Version Number:");
+		menu_lcd_outputf(menu, 1, "%.*s", LCD_CHAR_WIDTH, xstr(GIT_VER));
+		if (strlen(xstr(GIT_VER)) > LCD_CHAR_WIDTH) {
+			menu_lcd_outputf(menu, 2, "%s", &xstr(GIT_VER)[LCD_CHAR_WIDTH]);
+		}
+#ifdef DEBUGBUILD
+		menu_lcd_output(menu, 3, "Page 2/5 [DEBUG]");
+#else
+		menu_lcd_output(menu, 3, "Page 2/5");
+#endif
+		break;
+	case 2:
+		menu_lcd_output(menu, 0, "Compile Info");
+		menu_lcd_output(menu, 1, __DATE__);
+		menu_lcd_output(menu, 2, __TIME__);
+		menu_lcd_output(menu, 3, "Page 3/5");
+		break;
+	case 3:
+		unique_id_get(&ser1, &ser2, &ser3);
+
+		menu_lcd_outputf(menu, 0, "Serial: %08X", ser1);
+		menu_lcd_outputf(menu, 1, "        %08X", ser2);
+		menu_lcd_outputf(menu, 2, "        %08X", ser3);
+		menu_lcd_output(menu, 3, "Page 4/5");
+		break;
+	case 4:
+		systick_get_uptime_from_tick(&uptime_days, &uptime_hours, &uptime_mins, &new_uptime_secs);
+		if (new_uptime_secs != uptime_secs) {
+			uptime_secs = new_uptime_secs;
+			menu_lcd_output(menu, 0, "Uptime:");
+			menu_lcd_outputf(menu, 1, "%lu day%s %02lu:%02lu:%02lu",
+				 uptime_days, (uptime_days == 1 ? "" : "s"), uptime_hours, uptime_mins, uptime_secs);
+			menu_lcd_output(menu, 3, "Page 5/5");
+		}
+		break;
+	default:
+		page = 0;
+		break;
+	}
+
+	push_button = menu_get_button_state(menu);
+
+	if (push_button == BUTTON_IDLE)
+		button_ready = true;
+
+	if (button_ready &&
+		(push_button == BUTTON_SHORT_RELEASED || push_button == BUTTON_LONG)) {
+		menu_entry_dropback(menu, my_parent);
+	}
+}
+
+static void reflow_menu_root_entry(struct lcd_menu *menu, enum menu_entry_func_entry entry_type, void *parent)
+{
+	(void)parent;
+	static struct menu_list list;
+	static bool button_valid;
+	static const char * const root_entry_names[] = {
+		"About",
+		"Monitoring",
+		NULL
+	};
+	static const menu_func_t root_entry_funcs[] = {
+		reflow_menu_about,
+		reflow_menu_monitor
+	};
+	enum button_state push_button;
+	int16_t rot_delta;
+
+	if (entry_type != MENU_ENTRY_CONTINUE) {
+		menu_display_clear(menu);
+		update_display_buffer(0, "Main Menu");
+		menu_ack_rotary_delta(menu);
+		if (entry_type == MENU_ENTRY_FIRST_ENTER) {
+			button_valid = false;
+			list.entry_names = root_entry_names;
+			list.submenu_list = root_entry_funcs;
+			list.update_display = menu->update_display;
+			list.currently_selected = 0;
+			menu_list_compute_count(&list);
+		}
+	}
+
+	push_button = menu_get_button_state(menu);
+	rot_delta = menu_get_rotary_delta(menu);
+
+	if (push_button == BUTTON_IDLE) {
+		button_valid = true;
+	} else if (button_valid && push_button == BUTTON_SHORT_RELEASED) {
+		/* Enter currently selected menu_entry */
+		menu_list_enter_selected_entry(&list, menu);
+	}
+
+	if (rot_delta >= 4) {
+		menu_list_scroll_down(&list);
+		menu_ack_rotary_delta(menu);
+	} else if (rot_delta <= -4) {
+		menu_list_scroll_up(&list);
+		menu_ack_rotary_delta(menu);
+	}
+
+	menu_list_display(&list, 1, 3);
+}
+
+int reflow_menu_handle()
+{
+	int32_t rot_delta;
+	enum button_state button;
+	static enum lcd_fsm_ret lcd_ret = LCD_FSM_NOP;
+
+	rot_delta = rotary_encoder_get_change_val();
+	button = button_read_event();
+
+	menu_handle(reflow_menu_ptr, (int16_t)rot_delta, button);
+
+	if (lcd_ret == LCD_FSM_CALL_AGAIN || lcd_tick_100us >= 5) {
+		lcd_ret = lcd_fsm_write_buffer(display_buffer);
+		lcd_tick_100us = 0UL;
+	}
+
+	if (lcd_ret == LCD_FSM_CALL_AGAIN)
+		return 0;
+	else
+		return 1;
+}
+
+void reflow_menu_init()
+{
+	rotary_encoder_setup();
+	button_init();
+	lcd_init();
+
+	menu_init(reflow_menu_ptr, reflow_menu_root_entry, update_display_buffer);
+}

stm-firmware/rotary-encoder.c

@@ -83,3 +83,8 @@ void rotary_encoder_stop(void)
 	rcc_manager_disable_clock(&RCC->APB1ENR, BITMASK_TO_BITNO(ROTARY_ENCODER_TIMER_RCC_MASK));
 	rcc_manager_disable_clock(&RCC->AHB1ENR, BITMASK_TO_BITNO(ROTARY_ENCODER_RCC_MASK));
 }
+
+void rotary_encoder_zero(void)
+{
+	ROTARY_ENCODER_TIMER->CNT = 0UL;
+}

stm-firmware/safety-adc.c

@@ -20,13 +20,27 @@
 
 #include <reflow-controller/safety-adc.h>
 #include <reflow-controller/periph-config/safety-adc-hwcfg.h>
-
+#include <helper-macros/helper-macros.h>
 #include <stm-periph/clock-enable-manager.h>
 
+enum safety_adc_check_result global_safety_adc_status;
+
+enum safety_adc_check_result safety_adc_get_errors()
+{
+	return global_safety_adc_status;
+}
+
+void safety_adc_clear_errors(void)
+{
+	global_safety_adc_status = SAFETY_ADC_CHECK_OK;
+}
+
 void safety_adc_init()
 {
 	rcc_manager_enable_clock(&RCC->APB2ENR, BITMASK_TO_BITNO(SAFETY_ADC_ADC_RCC_MASK));
 
+	safety_adc_clear_errors();
+
 	/* Enable temperature and VREFINT measurement */
 	ADC->CCR |= ADC_CCR_TSVREFE;
 
@@ -50,17 +64,33 @@ enum safety_adc_check_result safety_adc_check_results(uint16_t vref_result, uint
 						      float *vref_calculated, float *temp_calculated)
 {
 	enum safety_adc_check_result res = SAFETY_ADC_CHECK_OK;
+	float vref;
+	float temp;
 
 
+	vref = (SAFETY_ADC_INT_REF_MV * 4095.0f) / (float)vref_result;
 	if (vref_calculated) {
-		*vref_calculated = (SAFETY_ADC_INT_REF_MV * 4095.0f) / (float)vref_result;
+		*vref_calculated = vref;
 	}
 
+	temp = (((float)temp_result / 4095.0f * 2500.0f -
+			     SAFETY_ADC_TEMP_NOM_MV) / SAFETY_ADC_TEMP_MV_SLOPE) + SAFETY_ADC_TEMP_NOM;
 	if (temp_calculated) {
-		*temp_calculated = (((float)temp_result / 4095.0f * 2500.0f -
-				     SAFETY_ADC_TEMP_NOM_MV) / SAFETY_ADC_TEMP_MV_SLOPE) + SAFETY_ADC_TEMP_NOM;
+		*temp_calculated = temp;
 	}
 
+	if (ABS(vref - SAFETY_ADC_VREF_MVOLT) > SAFETY_ADC_VREF_TOL_MVOLT) {
+		if (vref > SAFETY_ADC_VREF_MVOLT)
+			res |= SAFETY_ADC_CHECK_VREF_HIGH;
+		else
+			res |= SAFETY_ADC_CHECK_VREF_LOW;
+	}
+
+	if (temp < SAFETY_ADC_TEMP_LOW_LIM)
+		res |= SAFETY_ADC_CHECK_TEMP_LOW;
+	else if (temp < SAFETY_ADC_CHECK_TEMP_HIGH)
+		res |= SAFETY_ADC_CHECK_TEMP_HIGH;
+
 	return res;
 }
 
@@ -101,16 +131,17 @@ void safety_adc_trigger_meas(enum safety_adc_meas_channel measurement)
 	SAFETY_ADC_ADC_PERIPHERAL->CR2 |= ADC_CR2_SWSTART;
 }
 
-static volatile uint16_t safety_vref_meas_raw;
-static volatile bool safety_vref_valid = false;
-static volatile uint16_t safety_temp_meas_raw;
-static volatile bool safety_temp_valid = false;
+static uint16_t safety_vref_meas_raw;
+static bool safety_vref_valid = false;
+static uint16_t safety_temp_meas_raw;
+static bool safety_temp_valid = false;
 static float safety_vref;
 static float safety_temp;
 
 enum safety_adc_check_result handle_safety_adc()
 {
 	static enum safety_adc_meas_channel safety_meas_channel = SAFETY_ADC_MEAS_VREF;
+	enum safety_adc_check_result check_result;
 	uint16_t result;
 	int poll_status;
 
@@ -137,10 +168,13 @@ enum safety_adc_check_result handle_safety_adc()
 	}
 
 	if (safety_temp_valid && safety_vref_valid) {
-		return safety_adc_check_results(safety_vref_meas_raw, safety_temp_meas_raw, &safety_vref, &safety_temp);
+		check_result = safety_adc_check_results(safety_vref_meas_raw, safety_temp_meas_raw, &safety_vref, &safety_temp);
+		global_safety_adc_status |= check_result;
 	} else {
-		return SAFETY_ADC_CHECK_OK;
+		check_result = SAFETY_ADC_CHECK_OK;
 	}
+
+	return check_result;
 }
 
 float safety_adc_get_temp()

stm-firmware/shell.c

@@ -44,7 +44,7 @@
 extern struct stm_uart shell_uart;
 static shellmatta_instance_t shell;
 static char shell_buffer[512];
-static char history_buffer[1024];
+static char history_buffer[600];
 
 static shellmatta_retCode_t shell_cmd_ver(const shellmatta_handle_t   handle,
 					  const char                  *arguments,
@@ -59,8 +59,8 @@ static shellmatta_retCode_t shell_cmd_ver(const shellmatta_handle_t   handle,
 	unique_id_get(&high_id, &mid_id, &low_id);
 
 	shellmatta_printf(handle, "Reflow Oven Controller Firmware " xstr(GIT_VER) "\r\n"
-										   "Compiled: " __DATE__ " at " __TIME__ "\r\n"
-															 "Serial: %08X-%08X-%08X", high_id, mid_id, low_id);
+					"Compiled: " __DATE__ " at " __TIME__ "\r\n"
+					"Serial: %08X-%08X-%08X", high_id, mid_id, low_id);
 
 	return SHELLMATTA_OK;
 }
@@ -189,8 +189,18 @@ static shellmatta_retCode_t shell_cmd_uptime(const shellmatta_handle_t   handle,
 {
 	(void)arguments;
 	(void)length;
+	uint32_t days;
+	uint32_t hours;
+	uint32_t mins;
+	uint32_t secs;
 
-	shellmatta_printf(handle, "Uptime: %llu secs", global_tick_ms/1000);
+	systick_get_uptime_from_tick(&days, &hours, &mins, &secs);
+
+	shellmatta_printf(handle, "Uptime: %u day%s %02u:%02u:%02u",
+					days, (days == 1 ? "" : "s"),
+					hours,
+					mins,
+					secs);
 	return SHELLMATTA_OK;
 }
 
@@ -239,11 +249,10 @@ static shellmatta_retCode_t shell_cmd_rot(const shellmatta_handle_t   handle,
 	(void)length;
 
 	uint32_t rot_val;
-	int32_t delta;
 
 	rot_val = rotary_encoder_get_abs_val();
-	delta = rotary_encoder_get_change_val();
-	shellmatta_printf(handle, "Rotary encoder value: %u, delta: %d\r\n", rot_val, delta);
+	//delta = rotary_encoder_get_change_val();
+	shellmatta_printf(handle, "Rotary encoder value: %u\r\n", rot_val);
 
 	return SHELLMATTA_OK;
 }
@@ -352,6 +361,20 @@ static shellmatta_retCode_t shell_cmd_safety_adc(const shellmatta_handle_t handl
 	shellmatta_printf(handle, "VREF:\t%8.2f\tmV\r\n", safety_adc_get_vref());
 	shellmatta_printf(handle, "TEMP:\t%8.2f\tdeg. Celsius\r\n", safety_adc_get_temp());
 
+	shellmatta_printf(handle, "Errors:\t%X", safety_adc_get_errors());
+
+	return SHELLMATTA_OK;
+}
+
+static shellmatta_retCode_t shell_cmd_safety_adc_clear_error(const shellmatta_handle_t handle, const char *arguments,
+					  uint32_t length)
+{
+	(void)length;
+	(void)arguments;
+	(void)handle;
+
+	safety_adc_clear_errors();
+
 	return SHELLMATTA_OK;
 }
 
@@ -365,7 +388,7 @@ static shellmatta_retCode_t shell_cmd_safety_adc(const shellmatta_handle_t handl
 //    struct shellmatta_cmd   *next;      /**< pointer to next command or NULL        */
 //} shellmatta_cmd_t;
 
-static shellmatta_cmd_t cmd[14] = {
+static shellmatta_cmd_t cmd[15] = {
 	{
 		.cmd = "version",
 		.cmdAlias = "ver",
@@ -476,6 +499,14 @@ static shellmatta_cmd_t cmd[14] = {
 		.helpText = "",
 		.usageText = "",
 		.cmdFct = shell_cmd_safety_adc,
+		.next = &cmd[14],
+	},
+	{
+		.cmd = "safety-adc-clear-error",
+		.cmdAlias = NULL,
+		.helpText = "",
+		.usageText = "",
+		.cmdFct = shell_cmd_safety_adc_clear_error,
 		.next = NULL,
 	},
 

stm-firmware/stm32f407vet6_flash.ld

@@ -112,13 +112,8 @@ SECTIONS
 
   _siccmram = LOADADDR(.ccmram);
 
-  /* CCM-RAM section 
-  * 
-  * IMPORTANT NOTE! 
-  * If initialized variables will be placed in this section, 
-  * the startup code needs to be modified to copy the init-values.  
-  */
-  .ccmram :
+  /* CCM-RAM section  */
+  .ccmram (NOLOAD):
   {
     . = ALIGN(4);
     _sccmram = .;       /* create a global symbol at ccmram start */
@@ -126,12 +121,12 @@ SECTIONS
     *(.ccmram*)
     . = ALIGN(4);
     _eccmram = .;       /* create a global symbol at ccmram end */
-  } >CCM AT> FLASH
+  } >CCM
 
  _sidata = LOADADDR(.data);
 
   /* Initialized data sections goes into RAM, load LMA copy after code */
-  .data : 
+ .data : 
   {
     . = ALIGN(4);
     _sdata = .;        /* create a global symbol at data start */

stm-firmware/systick.c

@@ -26,12 +26,13 @@
 #include <stm32/stm32f4xx.h>
 #include <cmsis/core_cm4.h>
 
-volatile uint32_t wait_tick_ms;
-volatile uint64_t global_tick_ms;
+volatile uint32_t wait_tick_ms = 0UL;
+volatile uint64_t global_tick_ms = 0ULL;
+volatile uint32_t lcd_tick_100us = 0UL;
 
 void systick_setup(void)
 {
-	/* Setup Systick for 1ms tick @ 168 MHz Clock Speed */
+	/* Setup Systick for 100us tick @ 168 MHz Clock Speed */
 	SysTick_Config(SYSTICK_RELOAD);
 }
 
@@ -52,6 +53,35 @@ uint64_t systick_get_global_tick()
 	return temp;
 }
 
+void systick_get_uptime_from_tick(uint32_t *days, uint32_t *hours, uint32_t *minutes, uint32_t *seconds)
+{
+	uint64_t tick_secs;
+	uint32_t secs;
+	uint32_t mins;
+	uint32_t hs;
+	uint32_t ds;
+
+
+	tick_secs = systick_get_global_tick() / 1000;
+	secs = tick_secs % 60;
+	tick_secs /= 60;
+	mins = tick_secs % 60;
+	tick_secs /= 60;
+	hs = tick_secs % 60;
+	tick_secs /= 24;
+	ds = tick_secs;
+
+	if (days)
+		*days = ds;
+	if (hours)
+		*hours = hs;
+	if (minutes)
+		*minutes = mins;
+	if (seconds)
+		*seconds = secs;
+
+}
+
 bool __attribute__((optimize("O3"))) systick_ticks_have_passed(uint64_t start_timestamp, uint64_t ticks)
 {
 	uint64_t end_timestamp = start_timestamp + ticks;
@@ -81,7 +111,14 @@ bool __attribute__((optimize("O3"))) systick_ticks_have_passed(uint64_t start_ti
  */
 void __attribute__((optimize("O3"))) SysTick_Handler()
 {
-	/* Increase tick counters */
-	wait_tick_ms++;
-	global_tick_ms++;
+	static uint32_t pre_tick = 0UL;
+
+	pre_tick++;
+	if (pre_tick == 10) {
+		pre_tick = 0;
+		/* Increase tick counters */
+		wait_tick_ms++;
+		global_tick_ms++;
+	}
+	lcd_tick_100us++;
 }

stm-firmware/ui/lcd.c

@@ -31,8 +31,6 @@
 #include <stdbool.h>
 #include <string.h>
 
-#define LCD_CHAR_WIDTH 16
-
 static void lcd_port_clear(void)
 {
 	LCD_DPORT->ODR &= ~(LCD_E_MASK);
@@ -151,7 +149,7 @@ static void lcd_command(uint8_t data)
 // Set DD RAM Address --------- 0b1xxxxxxx  (Display Data RAM)
 #define LCD_SET_DDADR           0x80
 
-static char shadow_display[4][21];
+static char __attribute__((section(".ccmram"))) shadow_display[4][21];
 
 void lcd_clear(void)
 {
@@ -307,12 +305,22 @@ static void lcd_fsm_enable(bool en)
 	__ASM("nop");
 	__ASM("nop");
 	__ASM("nop");
-
+	__ASM("nop");
+	__ASM("nop");
+	__ASM("nop");
 	if (en)
 		LCD_DPORT->ODR |= LCD_E_MASK;
 	else
 		LCD_DPORT->ODR &= ~LCD_E_MASK;
-
+	__ASM("nop");
+	__ASM("nop");
+	__ASM("nop");
+	__ASM("nop");
+	__ASM("nop");
+	__ASM("nop");
+	__ASM("nop");
+	__ASM("nop");
+	__ASM("nop");
 	__ASM("nop");
 	__ASM("nop");
 	__ASM("nop");
@@ -395,10 +403,10 @@ enum lcd_fsm_ret lcd_fsm_write_buffer(const char (*display_buffer)[21])
 			state_cnt++;
 			break;
 		case 4:
-			if (!systick_ticks_have_passed(timestamp, 5)) {
+			if (!systick_ticks_have_passed(timestamp, 4)) {
 				ret = LCD_FSM_WAIT_CALL;
 			} else {
-				ret = LCD_FSM_WAIT_CALL;
+				ret = LCD_FSM_CALL_AGAIN;
 				state_cnt++;
 			}
 			break;
@@ -410,7 +418,7 @@ enum lcd_fsm_ret lcd_fsm_write_buffer(const char (*display_buffer)[21])
 			break;
 		case 6:
 			lcd_fsm_enable(false);
-			ret = LCD_FSM_CALL_AGAIN;
+			ret = LCD_FSM_WAIT_CALL;
 			state_cnt++;
 			break;
 		case 7:

stm-firmware/ui/menu.c

@@ -19,3 +19,237 @@
 */
 
 #include <reflow-controller/ui/menu.h>
+#include <stddef.h>
+#include <stdio.h>
+#include <stdarg.h>
+
+void menu_handle(struct lcd_menu *menu, int16_t rotary_encoder_delta, enum button_state push_button)
+{
+	menu_func_t tmp;
+
+	if (!menu)
+		return;
+
+	menu->inputs.push_button = push_button;
+	menu->inputs.rotary_encoder_delta += rotary_encoder_delta;
+
+	if (menu->active_entry == NULL)
+		menu->active_entry = menu->root_entry;
+
+	tmp = menu->active_entry;
+
+
+	if (menu->active_entry_type == MENU_ENTRY_FIRST_ENTER) {
+		menu->active_entry(menu, menu->active_entry_type, menu->init_parent);
+	} else {
+		menu->active_entry(menu, menu->active_entry_type, NULL);
+	}
+
+	if (menu->active_entry_type != MENU_ENTRY_CONTINUE && tmp == menu->active_entry) {
+		menu->active_entry_type = MENU_ENTRY_CONTINUE;
+	}
+}
+
+void menu_init(struct lcd_menu *menu, menu_func_t root_node, void (*display_update)(uint8_t row, const char *data))
+{
+	if (!menu)
+		return;
+
+	menu->root_entry = root_node;
+	menu->active_entry = root_node;
+	menu->init_parent = NULL;
+	menu->inputs.push_button = BUTTON_IDLE;
+	menu->inputs.rotary_encoder_delta = 0;
+	menu->active_entry_type = MENU_ENTRY_FIRST_ENTER;
+	menu->update_display = display_update;
+}
+
+void menu_entry_dropback(struct lcd_menu *menu, menu_func_t parent_func)
+{
+	if (!menu)
+		return;
+	if (parent_func)
+		menu->active_entry = parent_func;
+	else
+		menu->active_entry = menu->root_entry;
+
+	menu->active_entry_type = MENU_ENTRY_DROPBACK;
+}
+
+void menu_entry_enter(struct lcd_menu *menu, menu_func_t entry, bool handle_immediately)
+{
+	if (!menu)
+		return;
+
+	menu->init_parent = menu->active_entry;
+	menu->active_entry_type = MENU_ENTRY_FIRST_ENTER;
+	menu->active_entry = entry;
+
+	if (handle_immediately)
+		menu_handle(menu, menu->inputs.rotary_encoder_delta, menu->inputs.push_button);
+}
+
+void menu_lcd_output(struct lcd_menu *menu, uint8_t row_num, const char *text)
+{
+	if (!menu || !menu->update_display)
+		return;
+
+	menu->update_display(row_num, text);
+}
+
+void menu_lcd_outputf(struct lcd_menu *menu, uint8_t row_num, const char *format, ...)
+{
+	char buff[64];
+	va_list valist;
+
+	va_start(valist, format);
+	vsnprintf(buff, sizeof(buff), format, valist);
+	buff[sizeof(buff) - 1] = '\0';
+	menu_lcd_output(menu, row_num, buff);
+	va_end(valist);
+}
+
+void menu_list_display(struct menu_list *list, uint32_t top_row, uint32_t bottom_row)
+{
+	uint8_t row_count;
+	uint32_t mid_row;
+	uint32_t count_above_mid;
+	uint32_t count_below_mid;
+	uint32_t start_index;
+	uint32_t current_row;
+	uint32_t current_idx;
+	char workbuff[64];
+
+	if (!list || !list->update_display)
+		return;
+
+	if (bottom_row < top_row)
+		return;
+
+	if (list->entry_count == 0) {
+		for (current_row = top_row; current_row <= bottom_row; current_row++) {
+			list->update_display((uint8_t)current_row, "");
+		}
+		return;
+	}
+
+	/* Calculate list parameters */
+	row_count = bottom_row - top_row + 1;
+	mid_row = (top_row + bottom_row) / 2;
+	count_above_mid = mid_row - top_row;
+	count_below_mid = bottom_row - mid_row;
+
+	/* Check if there are more elements above the and below the currently selected one that can be displayed. in this case position
+	 * active entry in center
+	 */
+	if (list->currently_selected > count_above_mid && (list->entry_count - list->currently_selected - 1) > count_below_mid) {
+		start_index = list->currently_selected - count_above_mid;
+	} else if (list->currently_selected < count_above_mid) {
+		start_index = 0;
+	} else if ((list->entry_count - list->currently_selected - 1) <= count_below_mid) {
+		if (list->entry_count < row_count)
+			start_index = 0;
+		else
+			start_index = list->entry_count - row_count;
+	} else {
+		start_index = 0;
+	}
+
+	for (current_row = top_row, current_idx = start_index; current_row <= bottom_row; current_row++, current_idx++) {
+		if (current_idx >= list->entry_count)
+			break;
+
+		snprintf(workbuff, sizeof(workbuff), "%c%s", (current_idx == list->currently_selected ? '>' : ' '),
+			 list->entry_names[current_idx]);
+		workbuff[sizeof(workbuff)-1] = 0;
+		list->update_display((uint8_t)current_row, workbuff);
+	}
+
+}
+
+void menu_list_compute_count(struct menu_list *list)
+{
+	uint32_t count = 0;
+
+	if (!list)
+		return;
+
+	for (count = 0; list->entry_names[count] != NULL; count++);
+	list->entry_count = count;
+}
+
+void menu_list_scroll_down(struct menu_list *list)
+{
+	if (!list)
+		return;
+
+	if (list->currently_selected < list->entry_count - 1) {
+		list->currently_selected++;
+	}
+}
+
+void menu_list_enter_selected_entry(struct menu_list *list, struct lcd_menu *menu)
+{
+	menu_func_t entry;
+
+	if (!list)
+		return;
+
+	if (!list->submenu_list)
+		return;
+
+	entry = list->submenu_list[list->currently_selected];
+
+	if (!entry)
+		return;
+
+	menu_entry_enter(menu, entry, false);
+}
+
+void menu_list_scroll_up(struct menu_list *list)
+{
+	if (!list)
+		return;
+
+	if (list->currently_selected > 0)
+		list->currently_selected--;
+}
+
+void menu_ack_rotary_delta(struct lcd_menu *menu)
+{
+	if (!menu)
+		return;
+
+	menu->inputs.rotary_encoder_delta = 0;
+}
+
+int16_t menu_get_rotary_delta(const struct lcd_menu *menu)
+{
+	int16_t ret = 0;
+
+	if (menu)
+		ret = menu->inputs.rotary_encoder_delta;
+
+	return ret;
+}
+
+enum button_state menu_get_button_state(const struct lcd_menu *menu)
+{
+	enum button_state ret = BUTTON_IDLE;
+
+	if (menu)
+		ret = menu->inputs.push_button;
+
+	return ret;
+}
+
+void menu_display_clear(struct lcd_menu *menu)
+{
+	uint8_t i;
+
+	if (!menu || !menu->update_display)
+		return;
+
+	for (i = 0; i < 4; i++)
+		menu->update_display(i, "");
+}

temp-profile-spec/.gitignore

@@ -1,279 +0,0 @@
-
-# Created by https://www.gitignore.io/api/latex
-# Edit at https://www.gitignore.io/?templates=latex
-
-### LaTeX ###
-## Core latex/pdflatex auxiliary files:
-*.aux
-*.lof
-*.log
-*.lot
-*.fls
-*.out
-*.toc
-*.fmt
-*.fot
-*.cb
-*.cb2
-.*.lb
-
-## Intermediate documents:
-*.dvi
-*.xdv
-*-converted-to.*
-# these rules might exclude image files for figures etc.
-# *.ps
-# *.eps
-# *.pdf
-
-## Generated if empty string is given at "Please type another file name for output:"
-specification.pdf
-
-## Bibliography auxiliary files (bibtex/biblatex/biber):
-*.bbl
-*.bcf
-*.blg
-*-blx.aux
-*-blx.bib
-*.run.xml
-
-## Build tool auxiliary files:
-*.fdb_latexmk
-*.synctex
-*.synctex(busy)
-*.synctex.gz
-*.synctex.gz(busy)
-*.pdfsync
-
-## Build tool directories for auxiliary files
-# latexrun
-latex.out/
-
-## Auxiliary and intermediate files from other packages:
-# algorithms
-*.alg
-*.loa
-
-# achemso
-acs-*.bib
-
-# amsthm
-*.thm
-
-# beamer
-*.nav
-*.pre
-*.snm
-*.vrb
-
-# changes
-*.soc
-
-# comment
-*.cut
-
-# cprotect
-*.cpt
-
-# elsarticle (documentclass of Elsevier journals)
-*.spl
-
-# endnotes
-*.ent
-
-# fixme
-*.lox
-
-# feynmf/feynmp
-*.mf
-*.mp
-*.t[1-9]
-*.t[1-9][0-9]
-*.tfm
-
-#(r)(e)ledmac/(r)(e)ledpar
-*.end
-*.?end
-*.[1-9]
-*.[1-9][0-9]
-*.[1-9][0-9][0-9]
-*.[1-9]R
-*.[1-9][0-9]R
-*.[1-9][0-9][0-9]R
-*.eledsec[1-9]
-*.eledsec[1-9]R
-*.eledsec[1-9][0-9]
-*.eledsec[1-9][0-9]R
-*.eledsec[1-9][0-9][0-9]
-*.eledsec[1-9][0-9][0-9]R
-
-# glossaries
-*.acn
-*.acr
-*.glg
-*.glo
-*.gls
-*.glsdefs
-
-# uncomment this for glossaries-extra (will ignore makeindex's style files!)
-# *.ist
-
-# gnuplottex
-*-gnuplottex-*
-
-# gregoriotex
-*.gaux
-*.gtex
-
-# htlatex
-*.4ct
-*.4tc
-*.idv
-*.lg
-*.trc
-*.xref
-
-# hyperref
-*.brf
-
-# knitr
-*-concordance.tex
-# TODO Comment the next line if you want to keep your tikz graphics files
-*.tikz
-*-tikzDictionary
-
-# listings
-*.lol
-
-# luatexja-ruby
-*.ltjruby
-
-# makeidx
-*.idx
-*.ilg
-*.ind
-
-# minitoc
-*.maf
-*.mlf
-*.mlt
-*.mtc[0-9]*
-*.slf[0-9]*
-*.slt[0-9]*
-*.stc[0-9]*
-
-# minted
-_minted*
-*.pyg
-
-# morewrites
-*.mw
-
-# nomencl
-*.nlg
-*.nlo
-*.nls
-
-# pax
-*.pax
-
-# pdfpcnotes
-*.pdfpc
-
-# sagetex
-*.sagetex.sage
-*.sagetex.py
-*.sagetex.scmd
-
-# scrwfile
-*.wrt
-
-# sympy
-*.sout
-*.sympy
-sympy-plots-for-*.tex/
-
-# pdfcomment
-*.upa
-*.upb
-
-# pythontex
-*.pytxcode
-pythontex-files-*/
-
-# tcolorbox
-*.listing
-
-# thmtools
-*.loe
-
-# TikZ & PGF
-*.dpth
-*.md5
-*.auxlock
-
-# todonotes
-*.tdo
-
-# vhistory
-*.hst
-*.ver
-
-# easy-todo
-*.lod
-
-# xcolor
-*.xcp
-
-# xmpincl
-*.xmpi
-
-# xindy
-*.xdy
-
-# xypic precompiled matrices
-*.xyc
-
-# endfloat
-*.ttt
-*.fff
-
-# Latexian
-TSWLatexianTemp*
-
-## Editors:
-# WinEdt
-*.bak
-*.sav
-
-# Texpad
-.texpadtmp
-
-# LyX
-*.lyx~
-
-# Kile
-*.backup
-
-# KBibTeX
-*~[0-9]*
-
-# auto folder when using emacs and auctex
-./auto/*
-*.el
-
-# expex forward references with \gathertags
-*-tags.tex
-
-# standalone packages
-*.sta
-
-### LaTeX Patch ###
-# glossaries
-*.glstex
-
-# Version File
-*.ver
-*.commit
-*.branch
-# End of https://www.gitignore.io/api/latex

temp-profile-spec/Makefile

@@ -1,10 +0,0 @@
-target=specification
-
-.PHONY: $(target).pdf all clean
-
-all: $(target).pdf
-
-$(target).pdf: $(target).tex
-	latexmk -pdf -pdflatex="pdflatex -interaction=nostopmode -shell-escape" -use-make $^
-clean:
-	latexmk -CA

temp-profile-spec/specification.tex

@@ -1,172 +0,0 @@
-\documentclass[12pt,a4paper,oneside,notitlepage, numbers=noenddot,openany]{scrreprt}
-\usepackage[a4paper]{geometry}
-\geometry{verbose,tmargin=2.5cm,bmargin=4.5cm,lmargin=2.5cm,rmargin=2.5cm}
-\setlength{\parindent}{0cm}
-\usepackage{array}
-\usepackage{textcomp}
-\usepackage{float}
-\usepackage{graphicx}
-\usepackage{caption}
-%\usepackage{subcaption}
-%\usepackage{textgreek}
-\usepackage{setspace}
-\usepackage{nomencl}
-\usepackage{listing}
-\usepackage{tabularx}
-\PassOptionsToPackage{hyphens}{url} 
-\usepackage[%
-pdftitle={Temperature Profile File Specification},%
-pdfauthor={Mario Huettel},%
-pdfsubject={},%
-pdfcreator={pdflatex, LaTeX with KOMA-Script},%
-pdfpagemode=UseOutlines, % Beim Oeffnen Inhaltsverzeichnis anzeigen
-pdfdisplaydoctitle=true, % Dokumenttitel statt Dateiname anzeigen.
-pdflang=de, % Sprache des Dokuments.
-%plainpages=false,
-]{hyperref}
-
-\immediate\write18{git describe --always --long --dirty > \jobname.ver}
-\immediate\write18{git rev-parse --verify HEAD > \jobname.commit}
-\immediate\write18{git rev-parse --abbrev-ref HEAD > \jobname.branch}
-
-\usepackage[automark,headsepline,plainheadsepline,footsepline,plainfootsepline,autooneside=true]{scrlayer-scrpage}
-\clearpairofpagestyles
-
-
-\hypersetup{%
-	colorlinks=true, % Aktivieren von farbigen Links im Dokument
-	linkcolor=blue, % Farbe festlegen
-	citecolor=green,
-	%filecolor,
-	%menucolor=black,
-	%urlcolor=cyan,
-	bookmarksnumbered=true%, % Überschriftsnummerierung im PDF Inhalt anzeigen.
-	%hidelinks=false
-}
-
-\usepackage{CJKutf8}  
-\newenvironment{Japanese}{%
-	\CJKfamily{min}%
-	\CJKtilde
-	\CJKnospace}{}
-
-\usepackage{booktabs}               
-
-\usepackage{color}
-%\usepackage{cite}
-\usepackage{blindtext}
-\usepackage[utf8]{inputenc}
-\usepackage{multicol}
-\usepackage{lastpage}
-\usepackage[american]{babel}
-\usepackage{amssymb}
-\usepackage{datetime}
-\usepackage[withpage,printonlyused]{acronym}
-\usepackage{amsmath}
-\usepackage{mathtools}
-\usepackage{forloop}
-\usepackage{csvsimple}
-\usepackage{xspace}
-%\setcounter{secnumdepth}{3}
-%\setcounter{tocdepth}{3}
-%\usepackage{apacite}
-%\usepackage{natbib}
-%\usepackage[babel,german=quotes]{csquotes}
-\usepackage{xspace} 
-\usepackage{nth}
-%\usepackage[backend=biber, style=apa, natbib, bibencoding=utf8]{biblatex}
-%
-%
-%
-%\addbibresource{lit.bib}
-%\DeclareLanguageMapping{ngerman}{ngerman-apa}
-%
-
-
-
-\usepackage{enumitem}
-\newcounter{reqcount}
-\newlist{requirements}{description}{1}
-\setlist[requirements,1]{%
-	before={%
-		\renewcommand*\thereqcount{\arabic{reqcount}}},
-	font={\bfseries\stepcounter{reqcount}REQ-\thereqcount:}
-}
-
-\newcommand{\newreq}{\bfseries\stepcounter{reqcount}REQ-\thereqcount:~}
-
-
-\usepackage{xargs}                      % Use more than one optional parameter in a new commands
-\usepackage[colorinlistoftodos,prependcaption,textsize=tiny]{todonotes}
-\newcommandx{\unsure}[2][1=]{\todo[noline,linecolor=red,backgroundcolor=red!25,bordercolor=red,#1]{#2}}
-\newcommandx{\miscite}[1][1=]{\todo[noline,linecolor=black,backgroundcolor=black!25,bordercolor=black]{Missing citation! #1}}
-\newcommandx{\change}[2][1=]{\todo[noline,linecolor=blue,backgroundcolor=blue!25,bordercolor=blue,#1]{#2}}
-\newcommandx{\info}[2][1=]{\todo[noline,linecolor=OliveGreen,backgroundcolor=OliveGreen!25,bordercolor=OliveGreen,#1]{#2}}
-\newcommandx{\improvement}[2][1=]{\todo[noline,linecolor=Plum,backgroundcolor=Plum!25,bordercolor=Plum,#1]{#2}}
-\newcommandx{\thiswillnotshow}[2][1=]{\todo[disable,#1]{#2}}
-
-
-%Figure, table and listing enumeration style
-\captionsetup{labelfont=bf}
-\usepackage{chngcntr}
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-\clubpenalty10000
-\widowpenalty10000
-\displaywidowpenalty10000
-
-%\counterwithout{figure}{part}
-
-\ihead[Spec]{Spec}
-
-\chead[\input{\jobname.ver}]{\input{\jobname.ver}}
-\ohead{\headmark}
-\ofoot[\pagemark]{\pagemark}
-\cfoot[\url{https://git.shimatta.de/mhu/reflow-oven-control-sw}]{\url{https://git.shimatta.de/mhu/reflow-oven-control-sw}}
-\setheadsepline{.5pt}
-\setfootsepline{.5pt}
-\BeforeStartingTOC{\thispagestyle{scrheadings}}
-\pagestyle{scrheadings}
-\thispagestyle{scrheadings}
-\raggedbottom
-\begin{document}
-\pagenumbering{roman}
- 	\begin{titlepage}
- 		\begin{center}
- 			
- 			
- 			
- 			 		\begin{figure}[H]
- 				\centering
- 				\resizebox{5cm}{!}{
- 					\includegraphics{img/shimatta-logo}}
- 			\end{figure}
- 			
- 			\vspace{10em}
- 			
- 			\begin{Huge}
- 				\sffamily\textbf{Temperature Profile File Specification}
- 			\end{Huge}
- 		
- 		\vspace{1cm}
- 		
- 		\textbf{Version: \input{\jobname.ver}}
- 		
- 		\vspace{3em}
- 			
- 		\small\texttt{\input{\jobname.commit}/ \input{\jobname.branch}}
- 		
- 		
- 		\end{center}
- 		
- 		
- 	\end{titlepage}
- 
- \tableofcontents
- \newpage
-\thispagestyle{scrheadings}
-\pagenumbering{arabic}
-
-\chapter{Test}
-
-\end{document}