stm-firmware/crc-patcher/crc-patch-elf.py

@@ -9,8 +9,9 @@ For this, it searches the follwoing sections:
 	3) .ccmdata
 	4) .vectors
 
-All sections MUST be a multiple of 4 bytes long because the CRC calculation relies on whole 32 bit words.
+All sections MUST be a multiple of 4 bytes long
-The sections are excrated and the CRC is calculated for each section.
+because the CRC calculation relies on whole 32 bit words.
+The sections are extracted and the CRC is calculated for each section.
 
 In the section .flashcrc, the script expects a single struct with the prototype:
 struct flash_crcs {
@@ -22,16 +23,16 @@ struct flash_crcs {
 	uint32_t end_magic;
 };
 
-It checks, if the start magic and end magic are set to the appropriate values and then patches in the CRC values of the sections.
+It checks, if the start magic and end magic are set to the appropriate values and then
+patches in the CRC values of the sections.
 The magic values checked for are: 0xA8BE53F9 and 0xFFA582FF
 """
-from elftools.elf.elffile import ELFFile
+
-from elftools.elf.segments import Segment
-import elftools.elf.constants as elf_const
 import sys
+import struct
+from elftools.elf.elffile import ELFFile
 import crcmod
 import crcmod.predefined
-import struct
 
 crc_calc = crcmod.predefined.mkCrcFun('crc-32-mpeg')
 
@@ -42,6 +43,9 @@ if len(sys.argv) < 2:
 filename=sys.argv[1]
 
 def section_calculate_crc(section):
+	"""
+	Calculate CRC of ELF file section
+	"""
 	data = bytearray(section.data())
 	be_data = bytearray([0 for k in range(0, len(data))])
 	# Rearrange data, because the STM controller sees it as 32 bit little endian words
@@ -53,62 +57,68 @@ def section_calculate_crc(section):
 
 	return crc_calc(be_data)
 
-with open(filename, 'r+b') as f:
+def main():
-	elf = ELFFile(f)
+	"""
-	sections = {}
+	Main function. Patches CRCs into ELF file
-	sections['.text'] = elf.get_section_by_name('.text')
+	"""
-	sections['.data'] = elf.get_section_by_name('.data')
+	with open(filename, 'r+b') as elf_file:
-	sections['.ccmdata'] = elf.get_section_by_name('.ccmdata')
+		elf = ELFFile(elf_file)
-	sections['.vectors'] = elf.get_section_by_name('.vectors')
+		sections = {}
+		sections['.text'] = elf.get_section_by_name('.text')
+		sections['.data'] = elf.get_section_by_name('.data')
+		sections['.ccmdata'] = elf.get_section_by_name('.ccmdata')
+		sections['.vectors'] = elf.get_section_by_name('.vectors')
 
-	for key, sec in sections.items():
+		for key, sec in sections.items():
-		if sec is None:
+			if sec is None:
-			print("Error! Section", key, "not found in ELF file!")
+				print("Error! Section", key, "not found in ELF file!")
+				sys.exit(-1)
+			print('Found section', key, 'Size:',
+				sec.data_size, 'Type:', sec['sh_type'])
+			if sec['sh_type'] != 'SHT_PROGBITS':
+				print('Error! Section must be of type SHT_PROGBITS')
+				sys.exit(-1)
+			if sec.data_size % 4 != 0:
+				print("Section", key,
+					"has wrong size. Must be a multiple of 4 bytes!")
+				sys.exit(-1)
+
+		text_crc = section_calculate_crc(sections['.text'])
+		print('CRC of .text section:', hex(text_crc))
+		data_crc = section_calculate_crc(sections['.data'])
+		print('CRC of .data section:', hex(data_crc))
+		ccmdata_crc = section_calculate_crc(sections['.ccmdata'])
+		print('CRC of .ccmdata section:', hex(ccmdata_crc))
+		vextors_crc = section_calculate_crc(sections['.vectors'])
+		print('CRC of .vectors section:', hex(vextors_crc))
+
+		# Check the flashcrc section
+		flashcrc_sec = elf.get_section_by_name('.flashcrc')
+		if flashcrc_sec is None:
+			print('Section for flash CRC missing!')
 			sys.exit(-1)
-		print('Found section', key, 'Size:',
+		if flashcrc_sec.data_size != 6*4:
-			  sec.data_size, 'Type:', sec['sh_type'])
+			print("Error: .flashcrc section has wrong size:",flashcrc_sec.data_size)
-		if sec['sh_type'] != 'SHT_PROGBITS':
-			print('Error! Section must be of type SHT_PROGBITS')
-			sys.exit(-1)
-		if (sec.data_size % 4 != 0):
-			print("Section", key, "has wrong size. Must be a multiple of 4 bytes!")
 			sys.exit(-1)
 
-	text_crc = section_calculate_crc(sections['.text'])
+		crc_sec_data = bytearray(flashcrc_sec.data())
-	print('CRC of .text section:', hex(text_crc))
+		magic1 = struct.unpack('<I'*1, bytes(crc_sec_data[0:4]))[0]
-	data_crc = section_calculate_crc(sections['.data'])
+		magic2 = struct.unpack('<I'*1, bytes(crc_sec_data[-4:]))[0]
-	print('CRC of .data section:', hex(data_crc))
+		print("CRC section magic values:", hex(magic1), hex(magic2))
-	ccmdata_crc = section_calculate_crc(sections['.ccmdata'])
+		if magic1 != 0xA8BE53F9 or magic2 != 0xFFA582FF:
-	print('CRC of .ccmdata section:', hex(ccmdata_crc))
+			print("Wrong magics in CRC section. Data misalignment?")
-	vextors_crc = section_calculate_crc(sections['.vectors'])
+			sys.exit(-2)
-	print('CRC of .vectors section:', hex(vextors_crc))
 
-	# Check the flashcrc section
+		crc_sec_offset = flashcrc_sec['sh_offset']
-	flashcrc_sec = elf.get_section_by_name('.flashcrc')
+		print('CRC section ELF file offset:', hex(crc_sec_offset))
-	if flashcrc_sec is None:
-		print('Section for flash CRC missing!')
-		sys.exit(-1)
-	if flashcrc_sec.data_size != 6*4:
-		print("Error: .flashcrc section has wrong size:",flashcrc_sec.data_size)
-		sys.exit(-1);
 
-	crc_sec_data = bytearray(flashcrc_sec.data())
+		crc_sec_data[4:8] = struct.pack('<I',text_crc)
-	magic1 = struct.unpack('<I'*1, bytes(crc_sec_data[0:4]))[0]
+		crc_sec_data[8:12] = struct.pack('<I',data_crc)
-	magic2 = struct.unpack('<I'*1, bytes(crc_sec_data[-4:]))[0]
+		crc_sec_data[12:16] = struct.pack('<I',ccmdata_crc)
-	print("CRC section magic values:", hex(magic1), hex(magic2))
+		crc_sec_data[16:20] = struct.pack('<I',vextors_crc)
-	if magic1 != 0xA8BE53F9 or magic2 != 0xFFA582FF:
+		elf_file.seek(crc_sec_offset)
-		print("Wrong magics in CRC section. Data misalignment?")
+		elf_file.write(crc_sec_data)
-		sys.exit(-2)
+		print('CRCs patched successfully')
 
-	crc_sec_offset = flashcrc_sec['sh_offset']
+if __name__ == '__main__':
-	print('CRC section ELF file offset:', hex(crc_sec_offset))
+	main()
-	
-	crc_sec_data[4:8] = struct.pack('<I',text_crc)
-	crc_sec_data[8:12] = struct.pack('<I',data_crc)
-	crc_sec_data[12:16] = struct.pack('<I',ccmdata_crc)
-	crc_sec_data[16:20] = struct.pack('<I',vextors_crc)
-	f.seek(crc_sec_offset)
-	f.write(crc_sec_data)
-	print('CRCs patched successfully')
-
-	

stm-firmware/crc-patcher/pylintrc

@@ -0,0 +1,623 @@
+[MASTER]
+
+# A comma-separated list of package or module names from where C extensions may
+# be loaded. Extensions are loading into the active Python interpreter and may
+# run arbitrary code.
+extension-pkg-allow-list=
+
+# A comma-separated list of package or module names from where C extensions may
+# be loaded. Extensions are loading into the active Python interpreter and may
+# run arbitrary code. (This is an alternative name to extension-pkg-allow-list
+# for backward compatibility.)
+extension-pkg-whitelist=
+
+# Return non-zero exit code if any of these messages/categories are detected,
+# even if score is above --fail-under value. Syntax same as enable. Messages
+# specified are enabled, while categories only check already-enabled messages.
+fail-on=
+
+# Specify a score threshold to be exceeded before program exits with error.
+fail-under=10.0
+
+# Files or directories to be skipped. They should be base names, not paths.
+ignore=CVS
+
+# Add files or directories matching the regex patterns to the ignore-list. The
+# regex matches against paths.
+ignore-paths=
+
+# Files or directories matching the regex patterns are skipped. The regex
+# matches against base names, not paths.
+ignore-patterns=
+
+# Python code to execute, usually for sys.path manipulation such as
+# pygtk.require().
+#init-hook=
+
+# Use multiple processes to speed up Pylint. Specifying 0 will auto-detect the
+# number of processors available to use.
+jobs=1
+
+# Control the amount of potential inferred values when inferring a single
+# object. This can help the performance when dealing with large functions or
+# complex, nested conditions.
+limit-inference-results=100
+
+# List of plugins (as comma separated values of python module names) to load,
+# usually to register additional checkers.
+load-plugins=
+
+# Pickle collected data for later comparisons.
+persistent=yes
+
+# When enabled, pylint would attempt to guess common misconfiguration and emit
+# user-friendly hints instead of false-positive error messages.
+suggestion-mode=yes
+
+# Allow loading of arbitrary C extensions. Extensions are imported into the
+# active Python interpreter and may run arbitrary code.
+unsafe-load-any-extension=no
+
+
+[MESSAGES CONTROL]
+
+# Only show warnings with the listed confidence levels. Leave empty to show
+# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED.
+confidence=
+
+# Disable the message, report, category or checker with the given id(s). You
+# can either give multiple identifiers separated by comma (,) or put this
+# option multiple times (only on the command line, not in the configuration
+# file where it should appear only once). You can also use "--disable=all" to
+# disable everything first and then reenable specific checks. For example, if
+# you want to run only the similarities checker, you can use "--disable=all
+# --enable=similarities". If you want to run only the classes checker, but have
+# no Warning level messages displayed, use "--disable=all --enable=classes
+# --disable=W".
+disable=print-statement,
+        parameter-unpacking,
+        unpacking-in-except,
+        old-raise-syntax,
+        backtick,
+        long-suffix,
+        old-ne-operator,
+        old-octal-literal,
+        import-star-module-level,
+        non-ascii-bytes-literal,
+        raw-checker-failed,
+        bad-inline-option,
+        locally-disabled,
+        file-ignored,
+        suppressed-message,
+        useless-suppression,
+        deprecated-pragma,
+        use-symbolic-message-instead,
+        apply-builtin,
+        basestring-builtin,
+        buffer-builtin,
+        cmp-builtin,
+        coerce-builtin,
+        execfile-builtin,
+        file-builtin,
+        long-builtin,
+        raw_input-builtin,
+        reduce-builtin,
+        standarderror-builtin,
+        unicode-builtin,
+        xrange-builtin,
+        coerce-method,
+        delslice-method,
+        getslice-method,
+        setslice-method,
+        no-absolute-import,
+        old-division,
+        dict-iter-method,
+        dict-view-method,
+        next-method-called,
+        metaclass-assignment,
+        indexing-exception,
+        raising-string,
+        reload-builtin,
+        oct-method,
+        hex-method,
+        nonzero-method,
+        cmp-method,
+        input-builtin,
+        round-builtin,
+        intern-builtin,
+        unichr-builtin,
+        map-builtin-not-iterating,
+        zip-builtin-not-iterating,
+        range-builtin-not-iterating,
+        filter-builtin-not-iterating,
+        using-cmp-argument,
+        eq-without-hash,
+        div-method,
+        idiv-method,
+        rdiv-method,
+        exception-message-attribute,
+        invalid-str-codec,
+        sys-max-int,
+        bad-python3-import,
+        deprecated-string-function,
+        deprecated-str-translate-call,
+        deprecated-itertools-function,
+        deprecated-types-field,
+        next-method-defined,
+        dict-items-not-iterating,
+        dict-keys-not-iterating,
+        dict-values-not-iterating,
+        deprecated-operator-function,
+        deprecated-urllib-function,
+        xreadlines-attribute,
+        deprecated-sys-function,
+        exception-escape,
+        comprehension-escape
+
+# Enable the message, report, category or checker with the given id(s). You can
+# either give multiple identifier separated by comma (,) or put this option
+# multiple time (only on the command line, not in the configuration file where
+# it should appear only once). See also the "--disable" option for examples.
+enable=c-extension-no-member
+
+
+[REPORTS]
+
+# Python expression which should return a score less than or equal to 10. You
+# have access to the variables 'error', 'warning', 'refactor', and 'convention'
+# which contain the number of messages in each category, as well as 'statement'
+# which is the total number of statements analyzed. This score is used by the
+# global evaluation report (RP0004).
+evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)
+
+# Template used to display messages. This is a python new-style format string
+# used to format the message information. See doc for all details.
+#msg-template=
+
+# Set the output format. Available formats are text, parseable, colorized, json
+# and msvs (visual studio). You can also give a reporter class, e.g.
+# mypackage.mymodule.MyReporterClass.
+output-format=text
+
+# Tells whether to display a full report or only the messages.
+reports=no
+
+# Activate the evaluation score.
+score=yes
+
+
+[REFACTORING]
+
+# Maximum number of nested blocks for function / method body
+max-nested-blocks=5
+
+# Complete name of functions that never returns. When checking for
+# inconsistent-return-statements if a never returning function is called then
+# it will be considered as an explicit return statement and no message will be
+# printed.
+never-returning-functions=sys.exit,argparse.parse_error
+
+
+[STRING]
+
+# This flag controls whether inconsistent-quotes generates a warning when the
+# character used as a quote delimiter is used inconsistently within a module.
+check-quote-consistency=no
+
+# This flag controls whether the implicit-str-concat should generate a warning
+# on implicit string concatenation in sequences defined over several lines.
+check-str-concat-over-line-jumps=no
+
+
+[SIMILARITIES]
+
+# Ignore comments when computing similarities.
+ignore-comments=yes
+
+# Ignore docstrings when computing similarities.
+ignore-docstrings=yes
+
+# Ignore imports when computing similarities.
+ignore-imports=no
+
+# Ignore function signatures when computing similarities.
+ignore-signatures=no
+
+# Minimum lines number of a similarity.
+min-similarity-lines=4
+
+
+[BASIC]
+
+# Naming style matching correct argument names.
+argument-naming-style=snake_case
+
+# Regular expression matching correct argument names. Overrides argument-
+# naming-style.
+#argument-rgx=
+
+# Naming style matching correct attribute names.
+attr-naming-style=snake_case
+
+# Regular expression matching correct attribute names. Overrides attr-naming-
+# style.
+#attr-rgx=
+
+# Bad variable names which should always be refused, separated by a comma.
+bad-names=foo,
+          bar,
+          baz,
+          toto,
+          tutu,
+          tata
+
+# Bad variable names regexes, separated by a comma. If names match any regex,
+# they will always be refused
+bad-names-rgxs=
+
+# Naming style matching correct class attribute names.
+class-attribute-naming-style=any
+
+# Regular expression matching correct class attribute names. Overrides class-
+# attribute-naming-style.
+#class-attribute-rgx=
+
+# Naming style matching correct class constant names.
+class-const-naming-style=UPPER_CASE
+
+# Regular expression matching correct class constant names. Overrides class-
+# const-naming-style.
+#class-const-rgx=
+
+# Naming style matching correct class names.
+class-naming-style=PascalCase
+
+# Regular expression matching correct class names. Overrides class-naming-
+# style.
+#class-rgx=
+
+# Naming style matching correct constant names.
+const-naming-style=UPPER_CASE
+
+# Regular expression matching correct constant names. Overrides const-naming-
+# style.
+#const-rgx=
+
+# Minimum line length for functions/classes that require docstrings, shorter
+# ones are exempt.
+docstring-min-length=-1
+
+# Naming style matching correct function names.
+function-naming-style=snake_case
+
+# Regular expression matching correct function names. Overrides function-
+# naming-style.
+#function-rgx=
+
+# Good variable names which should always be accepted, separated by a comma.
+good-names=i,
+           j,
+           k,
+           ex,
+           Run,
+           _
+
+# Good variable names regexes, separated by a comma. If names match any regex,
+# they will always be accepted
+good-names-rgxs=
+
+# Include a hint for the correct naming format with invalid-name.
+include-naming-hint=no
+
+# Naming style matching correct inline iteration names.
+inlinevar-naming-style=any
+
+# Regular expression matching correct inline iteration names. Overrides
+# inlinevar-naming-style.
+#inlinevar-rgx=
+
+# Naming style matching correct method names.
+method-naming-style=snake_case
+
+# Regular expression matching correct method names. Overrides method-naming-
+# style.
+#method-rgx=
+
+# Naming style matching correct module names.
+module-naming-style=snake_case
+
+# Regular expression matching correct module names. Overrides module-naming-
+# style.
+#module-rgx=
+
+# Colon-delimited sets of names that determine each other's naming style when
+# the name regexes allow several styles.
+name-group=
+
+# Regular expression which should only match function or class names that do
+# not require a docstring.
+no-docstring-rgx=^_
+
+# List of decorators that produce properties, such as abc.abstractproperty. Add
+# to this list to register other decorators that produce valid properties.
+# These decorators are taken in consideration only for invalid-name.
+property-classes=abc.abstractproperty
+
+# Naming style matching correct variable names.
+variable-naming-style=snake_case
+
+# Regular expression matching correct variable names. Overrides variable-
+# naming-style.
+#variable-rgx=
+
+
+[FORMAT]
+
+# Expected format of line ending, e.g. empty (any line ending), LF or CRLF.
+expected-line-ending-format=
+
+# Regexp for a line that is allowed to be longer than the limit.
+ignore-long-lines=^\s*(# )?<?https?://\S+>?$
+
+# Number of spaces of indent required inside a hanging or continued line.
+indent-after-paren=4
+
+# String used as indentation unit. This is usually "    " (4 spaces) or "\t" (1
+# tab).
+indent-string='\t'
+
+# Maximum number of characters on a single line.
+max-line-length=100
+
+# Maximum number of lines in a module.
+max-module-lines=1000
+
+# Allow the body of a class to be on the same line as the declaration if body
+# contains single statement.
+single-line-class-stmt=no
+
+# Allow the body of an if to be on the same line as the test if there is no
+# else.
+single-line-if-stmt=no
+
+
+[MISCELLANEOUS]
+
+# List of note tags to take in consideration, separated by a comma.
+notes=FIXME,
+      XXX,
+      TODO
+
+# Regular expression of note tags to take in consideration.
+#notes-rgx=
+
+
+[SPELLING]
+
+# Limits count of emitted suggestions for spelling mistakes.
+max-spelling-suggestions=4
+
+# Spelling dictionary name. Available dictionaries: none. To make it work,
+# install the 'python-enchant' package.
+spelling-dict=
+
+# List of comma separated words that should be considered directives if they
+# appear and the beginning of a comment and should not be checked.
+spelling-ignore-comment-directives=fmt: on,fmt: off,noqa:,noqa,nosec,isort:skip,mypy:
+
+# List of comma separated words that should not be checked.
+spelling-ignore-words=
+
+# A path to a file that contains the private dictionary; one word per line.
+spelling-private-dict-file=
+
+# Tells whether to store unknown words to the private dictionary (see the
+# --spelling-private-dict-file option) instead of raising a message.
+spelling-store-unknown-words=no
+
+
+[VARIABLES]
+
+# List of additional names supposed to be defined in builtins. Remember that
+# you should avoid defining new builtins when possible.
+additional-builtins=
+
+# Tells whether unused global variables should be treated as a violation.
+allow-global-unused-variables=yes
+
+# List of names allowed to shadow builtins
+allowed-redefined-builtins=
+
+# List of strings which can identify a callback function by name. A callback
+# name must start or end with one of those strings.
+callbacks=cb_,
+          _cb
+
+# A regular expression matching the name of dummy variables (i.e. expected to
+# not be used).
+dummy-variables-rgx=_+$|(_[a-zA-Z0-9_]*[a-zA-Z0-9]+?$)|dummy|^ignored_|^unused_
+
+# Argument names that match this expression will be ignored. Default to name
+# with leading underscore.
+ignored-argument-names=_.*|^ignored_|^unused_
+
+# Tells whether we should check for unused import in __init__ files.
+init-import=no
+
+# List of qualified module names which can have objects that can redefine
+# builtins.
+redefining-builtins-modules=six.moves,past.builtins,future.builtins,builtins,io
+
+
+[LOGGING]
+
+# The type of string formatting that logging methods do. `old` means using %
+# formatting, `new` is for `{}` formatting.
+logging-format-style=old
+
+# Logging modules to check that the string format arguments are in logging
+# function parameter format.
+logging-modules=logging
+
+
+[TYPECHECK]
+
+# List of decorators that produce context managers, such as
+# contextlib.contextmanager. Add to this list to register other decorators that
+# produce valid context managers.
+contextmanager-decorators=contextlib.contextmanager
+
+# List of members which are set dynamically and missed by pylint inference
+# system, and so shouldn't trigger E1101 when accessed. Python regular
+# expressions are accepted.
+generated-members=
+
+# Tells whether missing members accessed in mixin class should be ignored. A
+# mixin class is detected if its name ends with "mixin" (case insensitive).
+ignore-mixin-members=yes
+
+# Tells whether to warn about missing members when the owner of the attribute
+# is inferred to be None.
+ignore-none=yes
+
+# This flag controls whether pylint should warn about no-member and similar
+# checks whenever an opaque object is returned when inferring. The inference
+# can return multiple potential results while evaluating a Python object, but
+# some branches might not be evaluated, which results in partial inference. In
+# that case, it might be useful to still emit no-member and other checks for
+# the rest of the inferred objects.
+ignore-on-opaque-inference=yes
+
+# List of class names for which member attributes should not be checked (useful
+# for classes with dynamically set attributes). This supports the use of
+# qualified names.
+ignored-classes=optparse.Values,thread._local,_thread._local
+
+# List of module names for which member attributes should not be checked
+# (useful for modules/projects where namespaces are manipulated during runtime
+# and thus existing member attributes cannot be deduced by static analysis). It
+# supports qualified module names, as well as Unix pattern matching.
+ignored-modules=
+
+# Show a hint with possible names when a member name was not found. The aspect
+# of finding the hint is based on edit distance.
+missing-member-hint=yes
+
+# The minimum edit distance a name should have in order to be considered a
+# similar match for a missing member name.
+missing-member-hint-distance=1
+
+# The total number of similar names that should be taken in consideration when
+# showing a hint for a missing member.
+missing-member-max-choices=1
+
+# List of decorators that change the signature of a decorated function.
+signature-mutators=
+
+
+[CLASSES]
+
+# Warn about protected attribute access inside special methods
+check-protected-access-in-special-methods=no
+
+# List of method names used to declare (i.e. assign) instance attributes.
+defining-attr-methods=__init__,
+                      __new__,
+                      setUp,
+                      __post_init__
+
+# List of member names, which should be excluded from the protected access
+# warning.
+exclude-protected=_asdict,
+                  _fields,
+                  _replace,
+                  _source,
+                  _make
+
+# List of valid names for the first argument in a class method.
+valid-classmethod-first-arg=cls
+
+# List of valid names for the first argument in a metaclass class method.
+valid-metaclass-classmethod-first-arg=cls
+
+
+[DESIGN]
+
+# Maximum number of arguments for function / method.
+max-args=5
+
+# Maximum number of attributes for a class (see R0902).
+max-attributes=7
+
+# Maximum number of boolean expressions in an if statement (see R0916).
+max-bool-expr=5
+
+# Maximum number of branch for function / method body.
+max-branches=12
+
+# Maximum number of locals for function / method body.
+max-locals=15
+
+# Maximum number of parents for a class (see R0901).
+max-parents=7
+
+# Maximum number of public methods for a class (see R0904).
+max-public-methods=20
+
+# Maximum number of return / yield for function / method body.
+max-returns=6
+
+# Maximum number of statements in function / method body.
+max-statements=50
+
+# Minimum number of public methods for a class (see R0903).
+min-public-methods=2
+
+
+[IMPORTS]
+
+# List of modules that can be imported at any level, not just the top level
+# one.
+allow-any-import-level=
+
+# Allow wildcard imports from modules that define __all__.
+allow-wildcard-with-all=no
+
+# Analyse import fallback blocks. This can be used to support both Python 2 and
+# 3 compatible code, which means that the block might have code that exists
+# only in one or another interpreter, leading to false positives when analysed.
+analyse-fallback-blocks=no
+
+# Deprecated modules which should not be used, separated by a comma.
+deprecated-modules=
+
+# Output a graph (.gv or any supported image format) of external dependencies
+# to the given file (report RP0402 must not be disabled).
+ext-import-graph=
+
+# Output a graph (.gv or any supported image format) of all (i.e. internal and
+# external) dependencies to the given file (report RP0402 must not be
+# disabled).
+import-graph=
+
+# Output a graph (.gv or any supported image format) of internal dependencies
+# to the given file (report RP0402 must not be disabled).
+int-import-graph=
+
+# Force import order to recognize a module as part of the standard
+# compatibility libraries.
+known-standard-library=
+
+# Force import order to recognize a module as part of a third party library.
+known-third-party=enchant
+
+# Couples of modules and preferred modules, separated by a comma.
+preferred-modules=
+
+
+[EXCEPTIONS]
+
+# Exceptions that will emit a warning when being caught. Defaults to
+# "BaseException, Exception".
+overgeneral-exceptions=BaseException,
+                       Exception