stm-firmware/include/reflow-controller/safety/flash-crc-struct.h

@@ -0,0 +1,37 @@
+/* Reflow Oven Controller
+*
+* Copyright (C) 2022  Mario Hüttel <mario.huettel@gmx.net>
+*
+* This file is part of the Reflow Oven Controller Project.
+*
+* The reflow oven controller is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+* The Reflow Oven Control Firmware is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with the reflow oven controller project.
+* If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _SAFETY_FLASH_CRC_STRUCT_H_
+#define _SAFETY_FLASH_CRC_STRUCT_H_
+
+#include <stdint.h>
+
+struct flash_crcs {
+    uint32_t start_magic;
+    uint32_t crc_section_text;
+    uint32_t crc_section_data;
+    uint32_t crc_section_ccm_data;
+    uint32_t crc_section_vectors;
+    uint32_t end_magic;
+};
+
+extern const struct flash_crcs crcs_in_flash;
+
+#endif /* _SAFETY_FLASH_CRC_STRUCT_H_ */

stm-firmware/include/reflow-controller/safety/flash-crc.h

@@ -0,0 +1,56 @@
+/* Reflow Oven Controller
+*
+* Copyright (C) 2022  Mario Hüttel <mario.huettel@gmx.net>
+*
+* This file is part of the Reflow Oven Controller Project.
+*
+* The reflow oven controller is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+* The Reflow Oven Control Firmware is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with the reflow oven controller project.
+* If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _SAFETY_FLASH_CRC_H_
+#define _SAFETY_FLASH_CRC_H_
+
+#include <stdint.h>
+
+enum flash_crc_section {
+    FLASH_CRC_VECTOR = 0,
+    FLASH_CRC_TEXT,
+    FLASH_CRC_DATA,
+    FLASH_CRC_CCMDATA,
+    N_FLASH_CRC,
+};
+
+/**
+ * @brief Perform a CRC check of the flash memory and set appropriate flags
+ * @return negative if internal error occured. Otherwise (independent from CRC check result) 0.
+ * @note This function requires the safety controller (and CRC unit) to be set up before calling!
+ */
+int flash_crc_trigger_check(void);
+
+/**
+ * @brief Calculate CRC over flash section
+ * @param sec Section to calculate CRC over
+ * @param[out] crc_result Calculated CRC
+ * @return negative if internal error occured. Otherwise (independent from CRC check result) 0.
+ */
+int flash_crc_calc_section(enum flash_crc_section sec, uint32_t *crc_result);
+
+/**
+ * @brief Get expected CRC value of a section
+ * @param sec Section
+ * @return Expected CRC
+ */
+uint32_t flash_crc_get_expected_crc(enum flash_crc_section sec);
+
+#endif /* _SAFETY_FLASH_CRC_H_ */

stm-firmware/include/reflow-controller/safety/safety-controller.h

@@ -267,13 +267,6 @@ int safety_controller_set_overtemp_limit(float over_temperature);
  */
 float safety_controller_get_overtemp_limit(void);
 
-/**
- * @brief Perform a CRC check of the flash memory and set appropriate flags
- * @return negative if internal error occured. Otherwise (independent from CRC check result) 0.
- * @note This function requires the safety controller to be set up before!
- */
-int safety_controller_trigger_flash_crc_check(void);
-
 /**
  * @brief Recalculate the CRC of a given CRC Monitor. This has to be done once the supervised registers update
  * @param mon Monitor to recalculate

stm-firmware/safety/flash-crc-struct.c

@@ -0,0 +1,31 @@
+/* Reflow Oven Controller
+*
+* Copyright (C) 2022  Mario Hüttel <mario.huettel@gmx.net>
+*
+* This file is part of the Reflow Oven Controller Project.
+*
+* The reflow oven controller is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+* The Reflow Oven Control Firmware is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with the reflow oven controller project.
+* If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <reflow-controller/safety/flash-crc-struct.h>
+#include <helper-macros/helper-macros.h>
+
+const struct flash_crcs IN_SECTION(.flashcrc) crcs_in_flash = {
+	.start_magic = 0xA8BE53F9UL,
+	.crc_section_ccm_data = 0UL,
+	.crc_section_text = 0UL,
+	.crc_section_data = 0UL,
+	.crc_section_vectors = 0UL,
+	.end_magic = 0xFFA582FFUL,
+};

stm-firmware/safety/flash-crc.c

@@ -0,0 +1,152 @@
+/* Reflow Oven Controller
+*
+* Copyright (C) 2022  Mario Hüttel <mario.huettel@gmx.net>
+*
+* This file is part of the Reflow Oven Controller Project.
+*
+* The reflow oven controller is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+* The Reflow Oven Control Firmware is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with the reflow oven controller project.
+* If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <reflow-controller/safety/flash-crc.h>
+#include <reflow-controller/safety/flash-crc-struct.h>
+#include <reflow-controller/safety/safety-controller.h>
+#include <stm-periph/crc-unit.h>
+
+extern const uint32_t __ld_vectors_start;
+extern const uint32_t __ld_vectors_end;
+extern const uint32_t __ld_text_start;
+extern const uint32_t __ld_text_end;
+
+extern const uint32_t __ld_sdata_ccm;
+extern const uint32_t __ld_edata_ccm;
+extern const uint32_t __ld_load_ccm_data;
+
+extern const uint32_t __ld_sdata;
+extern const uint32_t __ld_edata;
+extern const uint32_t __ld_load_data;
+
+
+int flash_crc_trigger_check(void)
+{
+	int ret = -1;
+	int res;
+	int any_err = 0;
+	uint32_t crc;
+
+	/* Perform CRC check over vector table */
+	res = flash_crc_calc_section(FLASH_CRC_VECTOR, &crc);
+	if (res || crc != flash_crc_get_expected_crc(FLASH_CRC_VECTOR))
+		safety_controller_report_error(ERR_FLAG_FLASH_CRC_CODE);
+	any_err |= res;
+
+	/* Perform CRC check over text section */
+	res = flash_crc_calc_section(FLASH_CRC_TEXT, &crc);
+	if (res || crc != flash_crc_get_expected_crc(FLASH_CRC_TEXT))
+		safety_controller_report_error(ERR_FLAG_FLASH_CRC_CODE);
+	any_err |= res;
+
+	/* Perform CRC check over data section */
+	res = flash_crc_calc_section(FLASH_CRC_DATA, &crc);
+	if (res || crc != flash_crc_get_expected_crc(FLASH_CRC_DATA))
+		safety_controller_report_error(ERR_FLAG_FLASH_CRC_DATA);
+	any_err |= res;
+
+	/* Perform CRC check over ccm data section */
+	res = flash_crc_calc_section(FLASH_CRC_CCMDATA, &crc);
+	if (res || crc != flash_crc_get_expected_crc(FLASH_CRC_CCMDATA))
+		safety_controller_report_error(ERR_FLAG_FLASH_CRC_DATA);
+	any_err |= res;
+
+	if (!any_err)
+		ret = 0;
+
+	return ret;
+}
+
+int flash_crc_calc_section(enum flash_crc_section sec, uint32_t *crc_result)
+{
+	uint32_t len;
+	const uint32_t *startptr;
+	const uint32_t *endptr;
+	const uint32_t *load_addr = NULL;
+
+	if (!crc_result)
+		return -1002;
+
+	switch (sec) {
+	case FLASH_CRC_VECTOR:
+		startptr = &__ld_vectors_start;
+		endptr = &__ld_vectors_end;
+		break;
+	case FLASH_CRC_TEXT:
+		startptr = &__ld_text_start;
+		endptr = &__ld_text_end;
+		break;
+	case FLASH_CRC_DATA:
+		startptr = &__ld_sdata;
+		endptr = &__ld_edata;
+		load_addr = &__ld_load_data;
+		break;
+	case FLASH_CRC_CCMDATA:
+		startptr = &__ld_sdata_ccm;
+		endptr = &__ld_edata_ccm;
+		load_addr = &__ld_load_ccm_data;
+		break;
+	default:
+		return -1001;
+	}
+
+	len = (uint32_t)((void *)endptr - (void *)startptr);
+	if (!load_addr)
+		load_addr = startptr;
+
+	/* Not a multiple of 32bit words long. Cannot calculate CRC in this case! */
+	if (len % 4)
+		return -1;
+
+	/* Calculate word count */
+	len /= 4;
+
+	/* Reset CRC and calculate over data range */
+	crc_unit_reset();
+	crc_unit_input_array(load_addr, len);
+	*crc_result = crc_unit_get_crc();
+
+	return 0;
+}
+
+uint32_t flash_crc_get_expected_crc(enum flash_crc_section sec)
+{
+	uint32_t crc;
+
+	switch (sec) {
+	case FLASH_CRC_VECTOR:
+		crc = crcs_in_flash.crc_section_vectors;
+		break;
+	case FLASH_CRC_TEXT:
+		crc = crcs_in_flash.crc_section_text;
+		break;
+	case FLASH_CRC_DATA:
+		crc = crcs_in_flash.crc_section_data;
+		break;
+	case FLASH_CRC_CCMDATA:
+		crc = crcs_in_flash.crc_section_ccm_data;
+		break;
+	default:
+		crc = 0xFFFFFFFFul;
+		break;
+	}
+
+	return crc;
+}

stm-firmware/safety/safety-controller.c

@@ -43,6 +43,7 @@
 #include <stm-periph/rcc-manager.h>
 #include <reflow-controller/temp-converter.h>
 #include <reflow-controller/adc-meas.h>
+#include <reflow-controller/safety/flash-crc.h>
 #include <reflow-controller/periph-config/safety-adc-hwcfg.h>
 
 /**
@@ -154,15 +155,6 @@ struct overtemp_config {
 	uint32_t crc;
 };
 
-struct flash_crcs {
-	uint32_t start_magic;
-	uint32_t crc_section_text;
-	uint32_t crc_section_data;
-	uint32_t crc_section_ccm_data;
-	uint32_t crc_section_vectors;
-	uint32_t end_magic;
-};
-
 struct crc_monitor_register {
 	const volatile void *reg_addr;
 	uint32_t mask;
@@ -914,7 +906,7 @@ void safety_controller_init(void)
 	/* This is usually done by the safety memory already. But, since this module also uses the CRC... */
 	crc_unit_init();
 
-	safety_controller_trigger_flash_crc_check();
+	flash_crc_trigger_check();
 	stack_check_init_corruption_detect_area();
 
 	hw_rev = get_pcb_hardware_version();
@@ -1454,94 +1446,6 @@ float safety_controller_get_overtemp_limit(void)
 	return safety_controller_overtemp_config.overtemp_deg_celsius;
 }
 
-extern const uint32_t __ld_vectors_start;
-extern const uint32_t __ld_vectors_end;
-extern const uint32_t __ld_text_start;
-extern const uint32_t __ld_text_end;
-
-extern const uint32_t __ld_sdata_ccm;
-extern const uint32_t __ld_edata_ccm;
-extern const uint32_t __ld_load_ccm_data;
-
-extern const uint32_t __ld_sdata;
-extern const uint32_t __ld_edata;
-extern const uint32_t __ld_load_data;
-
-int safety_controller_trigger_flash_crc_check(void)
-{
-	/* This structs needs to be volatile!!
-	 * This prevents the compiler form optimizing out the reads to the crcs which will be patched in later by
-	 * a separate python script!
-	 */
-	static volatile const struct flash_crcs IN_SECTION(.flashcrc) crcs_in_flash = {
-		.start_magic = 0xA8BE53F9UL,
-		.crc_section_ccm_data = 0UL,
-		.crc_section_text = 0UL,
-		.crc_section_data = 0UL,
-		.crc_section_vectors = 0UL,
-		.end_magic = 0xFFA582FFUL,
-	};
-
-	int ret = -1;
-	uint32_t len;
-	uint32_t crc;
-
-	/* Perform CRC check over vector table */
-	len = (uint32_t)((void *)&__ld_vectors_end - (void *)&__ld_vectors_start);
-	if (len % 4) {
-		safety_controller_report_error(ERR_FLAG_FLASH_CRC_CODE);
-	} else {
-		len /= 4;
-		crc_unit_reset();
-		crc_unit_input_array(&__ld_vectors_start, len);
-		crc = crc_unit_get_crc();
-		if (crc != crcs_in_flash.crc_section_vectors)
-			safety_controller_report_error(ERR_FLAG_FLASH_CRC_CODE);
-	}
-
-	/* Perform CRC check over text section */
-	len = (uint32_t)((void *)&__ld_text_end - (void *)&__ld_text_start);
-	if (len % 4) {
-		safety_controller_report_error(ERR_FLAG_FLASH_CRC_CODE);
-	} else {
-		len /= 4;
-		crc_unit_reset();
-		crc_unit_input_array(&__ld_text_start, len);
-		crc = crc_unit_get_crc();
-		if (crc != crcs_in_flash.crc_section_text)
-			safety_controller_report_error(ERR_FLAG_FLASH_CRC_CODE);
-	}
-
-	/* Perform CRC check over data section */
-	len = (uint32_t)((void *)&__ld_edata - (void *)&__ld_sdata);
-	if (len % 4) {
-		safety_controller_report_error(ERR_FLAG_FLASH_CRC_DATA);
-	} else {
-		len /= 4;
-		crc_unit_reset();
-		crc_unit_input_array(&__ld_load_data, len);
-		crc = crc_unit_get_crc();
-		if (crc != crcs_in_flash.crc_section_data)
-			safety_controller_report_error(ERR_FLAG_FLASH_CRC_DATA);
-	}
-
-	/* Perform CRC check over ccm data section */
-	len = (uint32_t)((void *)&__ld_edata_ccm - (void *)&__ld_sdata_ccm);
-	if (len % 4) {
-		safety_controller_report_error(ERR_FLAG_FLASH_CRC_DATA);
-	} else {
-		len /= 4;
-		crc_unit_reset();
-		crc_unit_input_array(&__ld_load_ccm_data, len);
-		crc = crc_unit_get_crc();
-		if (crc != crcs_in_flash.crc_section_ccm_data)
-			safety_controller_report_error(ERR_FLAG_FLASH_CRC_DATA);
-	}
-
-	ret = 0;
-	return ret;
-}
-
 int safety_controller_set_crc_monitor(enum crc_monitor mon, uint32_t password)
 {
 	uint32_t i;

stm-firmware/ui/shell.c

@@ -48,6 +48,7 @@
 #include <stm-periph/option-bytes.h>
 #include <reflow-controller/ui/gui.h>
 #include <reflow-controller/ui/shell-uart.h>
+#include <reflow-controller/safety/flash-crc.h>
 
 #include <stdio.h>
 
@@ -1020,6 +1021,53 @@ shellmatta_retCode_t shell_cmd_set_baud(const shellmatta_handle_t handle, const
 	return SHELLMATTA_OK;
 }
 
+static void shell_print_crc_line(const shellmatta_handle_t handle, const char *name,
+				 uint32_t crc, uint32_t crc_expected)
+{
+	shellmatta_printf(handle, "%-15s0x%08x    0x%08x  [%s]\r\n",
+			  name,
+			  crc,
+			  crc_expected,
+			  crc != crc_expected ? "\e[1;31mERR\e[m" : "\e[32mOK\e[m");
+}
+
+shellmatta_retCode_t shell_cmd_flash_crc(const shellmatta_handle_t handle, const char *args, uint32_t len)
+{
+	(void)args;
+	(void)len;
+	uint32_t crc = 0;
+	uint32_t crc_expected = 0;
+	int res;
+
+	shellmatta_printf(handle, "               Calculated    Expected    State\r\n\r\n");
+
+	res = flash_crc_calc_section(FLASH_CRC_VECTOR, &crc);
+	crc_expected = flash_crc_get_expected_crc(FLASH_CRC_VECTOR);
+	if (res)
+		shellmatta_printf(handle, "Error during calculation!\r\n");
+	shell_print_crc_line(handle, "Vector CRC:", crc, crc_expected);
+
+	res = flash_crc_calc_section(FLASH_CRC_TEXT, &crc);
+	crc_expected = flash_crc_get_expected_crc(FLASH_CRC_TEXT);
+	if (res)
+		shellmatta_printf(handle, "Error during calculation!\r\n");
+	shell_print_crc_line(handle, "Code CRC:", crc, crc_expected);
+
+	res = flash_crc_calc_section(FLASH_CRC_DATA, &crc);
+	crc_expected = flash_crc_get_expected_crc(FLASH_CRC_DATA);
+	if (res)
+		shellmatta_printf(handle, "Error during calculation!\r\n");
+	shell_print_crc_line(handle, "Data CRC:", crc, crc_expected);
+
+	res = flash_crc_calc_section(FLASH_CRC_CCMDATA, &crc);
+	crc_expected = flash_crc_get_expected_crc(FLASH_CRC_CCMDATA);
+	if (res)
+		shellmatta_printf(handle, "Error during calculation!\r\n");
+	shell_print_crc_line(handle, "CCM Data CRC:", crc, crc_expected);
+
+	return SHELLMATTA_OK;
+}
+
 //typedef struct shellmatta_cmd
 //{
 //    char                    *cmd;       /**< command name                           */
@@ -1029,7 +1077,7 @@ shellmatta_retCode_t shell_cmd_set_baud(const shellmatta_handle_t handle, const
 //    shellmatta_cmdFct_t     cmdFct;     /**< pointer to the cmd callack function    */
 //    struct shellmatta_cmd   *next;      /**< pointer to next command or NULL        */
 //} shellmatta_cmd_t;
-static shellmatta_cmd_t cmd[25] = {
+static shellmatta_cmd_t cmd[26] = {
 	{
 		.cmd = "version",
 		.cmdAlias = "ver",
@@ -1229,6 +1277,14 @@ static shellmatta_cmd_t cmd[25] = {
 		.helpText = "Set a new temporary baudrate for the UART",
 		.usageText = "baudrate <new baud>",
 		.cmdFct = shell_cmd_set_baud,
+		.next = &cmd[25],
+	},
+	{
+		.cmd = "flashcrc",
+		.cmdAlias = "fcrc",
+		.helpText = "Calculate the Flash CRCs",
+		.usageText = "flashcrc",
+		.cmdFct = shell_cmd_flash_crc,
 		.next = NULL,
 	},