/* Reflow Oven Controller
 *
 * Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
 *
 * This file is part of the Reflow Oven Controller Project.
 *
 * The reflow oven controller is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * GDSII-Converter is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with the reflow oven controller project.
 * If not, see <http://www.gnu.org/licenses/>.
 */

/**
 * @addtogroup digio
 * @{
 */

#ifndef __DIGIO_H__
#define __DIGIO_H__

#include <stdbool.h>
#include <stdint.h>
#include <helper-macros/helper-macros.h>

/**
 * @brief Port the digital I/Os are located in
 */
#define DIGIO_PORT GPIOB

/**
 * @brief Reset and clock control bit mask to enable clock of @ref DIGIO_PORT
 */
#define DIGIO_RCC_MASK RCC_AHB1ENR_GPIOBEN

/**
 * @brief List of the pins used by the digio module
 */
#define DIGIO_PINS 4,5,6,7


#if defined(DEBUGBUILD) || defined(UART_ON_DEBUG_HEADER)
#define DIGIO_INOUT_DEFAULT 0,0,0,0
#define DIGIO_ALTFUNC_DEFAULT 0,0,0,0
#else
#define DIGIO_INOUT_DEFAULT 0,0,2,2
#define DIGIO_ALTFUNC_DEFAULT 0,0,7,7
#endif

/**
 * @brief The port, the loudspeaker is connected to
 */
#define BEEPER_PORT GPIOB

/**
 * @brief The RCC mask for @ref BEEPER_PORT
 */
#define BEEPER_RCC_MASK RCC_AHB1ENR_GPIOBEN

/**
 * @brief Enable all clocks and setup pins in default setting
 * @warning This function uses @ref rcc_manager_enable_clock to enable the clocks. Therefore, it must not be called
 * multiple times.
 */
void digio_setup_default_all(void);

/**
 * @brief Set up a DIGIO pin.
 *
 * Set up a digital IO pin config. For the index association see the @ref DIGIO_PINS table.
 *
 * @param num DIGIO number starting with 0
 * @param in_out In: 0, Out 1, alternate function: 2
 * @param alt_func Alternate function to set. Consult datasheet of STM32F407
 */
void digio_setup_pin(uint8_t num, uint8_t in_out, uint8_t alt_func);

/**
 * @brief Set a digio output port
 * @param num Digio channel number
 * @param val Value: 0 or 1.
 */
void digio_set(uint8_t num, int val);

/**
 * @brief Read the state of a digio channel
 * @param num Channel number
 * @return digital pin level.
 */
int digio_get(uint8_t num);

/**
 * @brief Port the LEDs are connected to
 */
#define LED_PORT GPIOB

/**
 * @brief RCC mask to enable clock for @ref LED_PORT
 */
#define LED_RCC_MASK RCC_AHB1ENR_GPIOBEN

/**
 * @brief Pin list on @ref LED_PORT that are connected to LEDs
 */
#define LED_PINS 2,3

/**
 * @brief Set up the LED Port
 */
void led_setup(void);

/**
 * @brief Set the LED status
 * @param num LED number
 * @param val Value: 1 on, 0 off.
 */
void led_set(uint8_t num, int val);

/**
 * @brief Get the state of a LED
 * @param num LED number
 * @return Stateof the LED: 0 off, 1 on; -1 in case of an error
 */
int led_get(uint8_t num);

/**
 * @brief Port to use for the loudpseaker
 */
#define LOUDSPEAKER_PORT GPIOB

/**
 * @brief RCC mask for @ref LOUDSPEAKER_PORT
 */
#define LOUDSPEAKER_RCC_MASK RCC_AHB1ENR_GPIOBEN

/**
 * @brief Pin on @ref LOUDSPEAKER_PORT the speaker is cnnected to
 */
#define LOUDSPEAKER_PIN 1

/**
 * @brief The loudpseaker requires a frequncy signal instead of a simple on/off signal.
 */
#define LOUDSPEAKER_MULTIFREQ 1

/**
 * @brief Defautl timer relaod for the frequency of the speaker. Only relevant if @ref LOUDSPEAKER_MULTIFREQ is 1.
 */
#define LOUDSPEAKER_MULTIFREQ_DEFAULT 9

/**
 * @brief Setup the loudspeaker
 */
void loudspeaker_setup(void);

/**
 * @brief Set the loudspeaker value
 * @param val Value
 */
void loudspeaker_set(uint16_t val);

/**
 * @brief Get current value of the loadspeaker
 * @return Value
 */
uint16_t loudspeaker_get(void);

#endif /* __DIGIO_H__ */

/** @} */