reflow-oven-control-sw/stm-firmware/crc-patcher/crc_patch_elf.py

125 lines
3.8 KiB
Python
Executable File

#!/bin/python
"""
This script patches the CRC checksums into an existing ELF file.
For this, it searches the follwoing sections:
1) .text
2) .data
3) .ccmdata
4) .vectors
All sections MUST be a multiple of 4 bytes long
because the CRC calculation relies on whole 32 bit words.
The sections are extracted and the CRC is calculated for each section.
In the section .flashcrc, the script expects a single struct with the prototype:
struct flash_crcs {
uint32_t start_magic;
uint32_t crc_section_text;
uint32_t crc_section_data;
uint32_t crc_section_ccm_data;
uint32_t crc_section_vectors;
uint32_t end_magic;
};
It checks, if the start magic and end magic are set to the appropriate values and then
patches in the CRC values of the sections.
The magic values checked for are: 0xA8BE53F9 and 0xFFA582FF
"""
import sys
import struct
from elftools.elf.elffile import ELFFile
import crcmod
import crcmod.predefined
crc_calc = crcmod.predefined.mkCrcFun('crc-32-mpeg')
if len(sys.argv) < 2:
print("Usage:", sys.argv[0], ' <elf file>')
sys.exit(-1)
filename=sys.argv[1]
def section_calculate_crc(section):
"""
Calculate CRC of ELF file section
"""
data = bytearray(section.data())
be_data = bytearray([0 for k in range(0, len(data))])
# Rearrange data, because the STM controller sees it as 32 bit little endian words
for i in range(0, int(len(data)/4)):
be_data[i*4+0] = data[i*4+3]
be_data[i*4+1] = data[i*4+2]
be_data[i*4+2] = data[i*4+1]
be_data[i*4+3] = data[i*4+0]
return crc_calc(be_data)
def main():
"""
Main function. Patches CRCs into ELF file
"""
with open(filename, 'r+b') as elf_file:
elf = ELFFile(elf_file)
sections = {}
sections['.text'] = elf.get_section_by_name('.text')
sections['.data'] = elf.get_section_by_name('.data')
sections['.ccmdata'] = elf.get_section_by_name('.ccmdata')
sections['.vectors'] = elf.get_section_by_name('.vectors')
for key, sec in sections.items():
if sec is None:
print("Error! Section", key, "not found in ELF file!")
sys.exit(-1)
print('Found section', key, 'Size:',
sec.data_size, 'Type:', sec['sh_type'])
if sec['sh_type'] != 'SHT_PROGBITS':
print('Error! Section must be of type SHT_PROGBITS')
sys.exit(-1)
if sec.data_size % 4 != 0:
print("Section", key,
"has wrong size. Must be a multiple of 4 bytes!")
sys.exit(-1)
text_crc = section_calculate_crc(sections['.text'])
print('CRC of .text section:', hex(text_crc))
data_crc = section_calculate_crc(sections['.data'])
print('CRC of .data section:', hex(data_crc))
ccmdata_crc = section_calculate_crc(sections['.ccmdata'])
print('CRC of .ccmdata section:', hex(ccmdata_crc))
vextors_crc = section_calculate_crc(sections['.vectors'])
print('CRC of .vectors section:', hex(vextors_crc))
# Check the flashcrc section
flashcrc_sec = elf.get_section_by_name('.flashcrc')
if flashcrc_sec is None:
print('Section for flash CRC missing!')
sys.exit(-1)
if flashcrc_sec.data_size != 6*4:
print("Error: .flashcrc section has wrong size:",flashcrc_sec.data_size)
sys.exit(-1)
crc_sec_data = bytearray(flashcrc_sec.data())
magic1 = struct.unpack('<I'*1, bytes(crc_sec_data[0:4]))[0]
magic2 = struct.unpack('<I'*1, bytes(crc_sec_data[-4:]))[0]
print("CRC section magic values:", hex(magic1), hex(magic2))
if magic1 != 0xA8BE53F9 or magic2 != 0xFFA582FF:
print("Wrong magics in CRC section. Data misalignment?")
sys.exit(-2)
crc_sec_offset = flashcrc_sec['sh_offset']
print('CRC section ELF file offset:', hex(crc_sec_offset))
crc_sec_data[4:8] = struct.pack('<I',text_crc)
crc_sec_data[8:12] = struct.pack('<I',data_crc)
crc_sec_data[12:16] = struct.pack('<I',ccmdata_crc)
crc_sec_data[16:20] = struct.pack('<I',vextors_crc)
elf_file.seek(crc_sec_offset)
elf_file.write(crc_sec_data)
print('CRCs patched successfully')
if __name__ == '__main__':
main()