catch2/docs/release-notes.md

2.0.1

Breaking changes

• Removed C++98 support
• Removed legacy reporter support
• Removed legacy generator support
  • Generator support will come back later, reworked
• Removed Catch::toString support
  • The new stringification machinery uses Catch::StringMaker specializations first and operator<< overloads second.
• Removed legacy SCOPED_MSG and SCOPED_INFO macros
• Removed INTERNAL_CATCH_REGISTER_REPORTER
  • CATCH_REGISTER_REPORTER should be used to register reporters
• Removed legacy [hide] tag
  • [.], [.foo] and [!hide] are still supported
• Output into debugger is now colourized
• *_THROWS_AS(expr, exception_type) now unconditionally appends const& to the exception type.
• CATCH_CONFIG_FAST_COMPILE now affects the CHECK_ family of assertions as well as REQUIRE_ family of assertions
  • This is most noticeable in CHECK(throws()), which would previously report failure, properly stringify the exception and continue. Now it will report failure and stop executing current section.
• Removed deprecated matcher utility functions Not, AllOf and AnyOf.
  • They are superseded by operators !, && and ||, which are natural and do not have limited arity
• Removed support for non-const comparison operators
  • Non-const comparison operators are an abomination that should not exist
  • They were breaking support for comparing function to function pointer
• std::pair and std::tuple are no longer stringified by default
  • This is done to avoid dragging in <tuple> and <utility> headers in common path
  • Their stringification can be enabled per-file via new configuration macros
• Approx is subtly different and hopefully behaves more as users would expect
  • Approx::scale defaults to 0.0
  • Approx::epsilon no longer applies to the larger of the two compared values, but only to the Approx's value
  • INFINITY == Approx(INFINITY) returns true

Improvements

• Reporters and Listeners can be defined in files different from the main file
  • The file has to define CATCH_CONFIG_EXTERNAL_INTERFACES before including catch.hpp.
• Errors that happen during set up before main are now caught and properly reported once main is entered
  • If you are providing your own main, you can access and use these as well.
• New assertion macros, *_THROWS_WITH(expr, exception_type, matcher) are provided
  • As the arguments suggest, these allow you to assert that an expression throws desired type of exception and pass the exception to a matcher.
• JUnit reporter no longer has significantly different output for test cases with and without sections
• Most assertions now support expressions containing commas (ie REQUIRE(foo() == std::vector<int>{1, 2, 3});)
• Catch now contains experimental micro benchmarking support
  • See projects/SelfTest/Benchmark.tests.cpp for examples
  • The support being experiment means that it can be changed without prior notice
• Catch uses new CLI parsing library (Clara)
  • Users can now easily add new command line options to the final executable
  • This also leads to some changes in Catch::Session interface
• All parts of matchers can be removed from a TU by defining CATCH_CONFIG_DISABLE_MATCHERS
  • This can be used to somewhat speed up compilation times
• An experimental implementation of CATCH_CONFIG_DISABLE has been added
  • Inspired by Doctest's DOCTEST_CONFIG_DISABLE
  • Useful for implementing tests in source files
    • ie for functions in anonymous namespaces
  • Removes all assertions
  • Prevents TEST_CASE registrations
  • Exception translators are not registered
  • Reporters are not registered
  • Listeners are not registered
• Reporters/Listeners are now notified of fatal errors
  • This means specific signals or structured exceptions
  • The Reporter/Listener interface provides default, empty, implementation to preserve backward compatibility
• Stringification of std::chrono::duration and std::chrono::time_point is now supported
  • Needs to be enabled by a per-file compile time configuration option
• Add pkg-config support to CMake install command

Fixes

• Don't use console colour if running in XCode
• Explicit constructor in reporter base class
• Swept out -Wweak-vtables, -Wexit-time-destructors, -Wglobal-constructors warnings
• Compilation for Universal Windows Platform (UWP) is supported
  • SEH handling and colorized output are disabled when compiling for UWP
• Implemented a workaround for std::uncaught_exception issues in libcxxrt
  • These issues caused incorrect section traversals
  • The workaround is only partial, user's test can still trigger the issue by using throw; to rethrow an exception
• Suppressed C4061 warning under MSVC

Internal changes

• The development version now uses .cpp files instead of header files containing implementation.
  • This makes partial rebuilds much faster during development
• The expression decomposition layer has been rewritten
• The evaluation layer has been rewritten
• New library (TextFlow) is used for formatting text to output

Older versions

1.9.x

1.9.6

Improvements

• Catch's runtime overhead has been significantly decreased (#937, #939)
• Added --list-extra-info cli option (#934).
  • It lists all tests together with extra information, ie filename, line number and description.

1.9.5

Fixes

• Truthy expressions are now reconstructed properly, not as booleans (#914)
• Various warnings are no longer erroneously suppressed in test files (files that include catch.hpp, but do not define CATCH_CONFIG_MAIN or CATCH_CONFIG_RUNNER) (#871)
• Catch no longer fails to link when main is compiled as C++, but linked against Objective-C (#855)
• Fixed incorrect gcc version detection when deciding to use __COUNTER__ (#928)
  • Previously any GCC with minor version less than 3 would be incorrectly classified as not supporting __COUNTER__.
• Suppressed C4996 warning caused by upcoming updated to MSVC 2017, marking std::uncaught_exception as deprecated. (#927)

Improvements

• CMake integration script now incorporates debug messages and registers tests in an improved way (#911)
• Various documentation improvements

1.9.4

Fixes

• CATCH_FAIL macro no longer causes compilation error without variadic macro support
• INFO messages are no longer cleared after being reported once

Improvements and minor changes

• Catch now uses wmain when compiled under Windows and UNICODE is defined.
  • Note that Catch still officially supports only ASCII

1.9.3

Fixes

• Completed the fix for (lack of) uint64_t in earlier Visual Studios

1.9.2

Improvements and minor changes

• All of Approx's member functions now accept strong typedefs in C++11 mode (#888)
  • Previously Approx::scale, Approx::epsilon, Approx::margin and Approx::operator() didn't.

Fixes

• POSIX signals are now disabled by default under QNX (#889)
  • QNX does not support current enough (2001) POSIX specification
• JUnit no longer counts exceptions as failures if given test case is marked as ok to fail.
• Catch::Option should now have its storage properly aligned.
• Catch no longer attempts to define uint64_t on windows (#862)
  • This was causing trouble when compiled under Cygwin

Other

• Catch is now compiled under MSVC 2017 using std:c++latest (C++17 mode) in CI
• We now provide cmake script that autoregisters Catch tests into ctest.
  • See contrib folder.

1.9.1

Fixes

• Unexpected exceptions are no longer ignored by default (#885, #887)

1.9.0

Improvements and minor changes

• Catch no longer attempts to ensure the exception type passed by user in REQUIRE_THROWS_AS is a constant reference.
  • It was causing trouble when REQUIRE_THROWS_AS was used inside templated functions
  • This actually reverts changes made in v1.7.2
• Catch's Version struct should no longer be double freed when multiple instances of Catch tests are loaded into single program (#858)
  • It is now a static variable in an inline function instead of being an externed struct.
• Attempt to register invalid tag or tag alias now throws instead of calling exit().
  • Because this happen before entering main, it still aborts execution
  • Further improvements to this are coming
• CATCH_CONFIG_FAST_COMPILE now speeds-up compilation of REQUIRE* assertions by further ~15%.
  • The trade-off is disabling translation of unexpected exceptions into text.
• When Catch is compiled using C++11, Approx is now constructible with anything that can be explicitly converted to double.
• Captured messages are now printed on unexpected exceptions

Fixes:

• Clang's -Wexit-time-destructors should be suppressed for Catch's internals
• GCC's -Wparentheses is now suppressed for all TU's that include catch.hpp.
  • This is functionally a revert of changes made in 1.8.0, where we tried using _Pragma based suppression. This should have kept the suppression local to Catch's assertions, but bugs in GCC's handling of _Pragmas in C++ mode meant that it did not always work.
• You can now tell Catch to use C++11-based check when checking whether a type can be streamed to output.
  • This fixes cases when an unstreamable type has streamable private base (#877)
  • Details can be found in documentation

Other notes:

• We have added VS 2017 to our CI
• Work on Catch 2 should start soon

1.8.x

1.8.2

Improvements and minor changes

• TAP reporter now behaves as if -s was always set
  • This should be more consistent with the protocol desired behaviour.
• Compact reporter now obeys -d yes argument (#780)
  • The format is "XXX.123 s: " (3 decimal places are always present).
  • Before it did not report the durations at all.
• XML reporter now behaves the same way as Console reporter in regards to INFO
  • This means it reports INFO messages on success, if output on success (-s) is enabled.
  • Previously it only reported INFO messages on failure.
• CAPTURE(expr) now stringifies expr in the same way assertion macros do (#639)
• Listeners are now finally documented.
  • Listeners provide a way to hook into events generated by running your tests, including start and end of run, every test case, every section and every assertion.

Fixes:

• Catch no longer attempts to reconstruct expression that led to a fatal error (#810)
  • This fixes possible signal/SEH loop when processing expressions, where the signal was triggered by expression decomposition.
• Fixed (C4265) missing virtual destructor warning in Matchers (#844)
• std::strings are now taken by const& everywhere (#842).
  • Previously some places were taking them by-value.
• Catch should no longer change errno (#835).
  • This was caused by libstdc++ bug that we now work around.
• Catch now provides FAIL_CHECK( ... ) macro (#765).
  • Same as FAIL( ... ), but does not abort the test.
• Functions like fabs, tolower, memset, isalnum are now used with std:: qualification (#543).
• Clara no longer assumes first argument (binary name) is always present (#729)
  • If it is missing, empty string is used as default.
• Clara no longer reads 1 character past argument string (#830)
• Regression in Objective-C bindings (Matchers) fixed (#854)

Other notes:

• We have added VS 2013 and 2015 to our CI
• Catch Classic (1.x.x) now contains its own, forked, version of Clara (the argument parser).

1.8.1

Fixes

Cygwin issue with gettimeofday - #define was not early enough

1.8.0

New features/ minor changes

• Matchers have new, simpler (and documented) interface.
  • Catch provides string and vector matchers.
  • For details see Matchers documentation.
• Changed console reporter test duration reporting format (#322)
  • Old format: Some simple comparisons between doubles completed in 0.000123s
  • New format: xxx.123s: Some simple comparisons between doubles (There will always be exactly 3 decimal places)
• Added opt-in leak detection under MSVC + Windows (#439)
  • Enable it by compiling Catch's main with CATCH_CONFIG_WINDOWS_CRTDBG
• Introduced new compile-time flag, CATCH_CONFIG_FAST_COMPILE, trading features for compilation speed.
  • Moves debug breaks out of tests and into implementation, speeding up test compilation time (~10% on linux).
  • More changes are coming
• Added TAP (Test Anything Protocol) and Automake reporters.
  • These are not present in the default single-include header and need to be downloaded from GitHub separately.
  • For details see documentation about integrating with build systems.
• XML reporter now reports filename as part of the Section and TestCase tags.
• Approx now supports an optional margin of absolute error
  • It has also received new documentation.

Fixes

• Silenced C4312 ("conversion from int to 'ClassName *") warnings in the evaluate layer.
• Fixed C4512 ("assignment operator could not be generated") warnings under VS2013.
• Cygwin compatibility fixes
  • Signal handling is no longer compiled by default.
  • Usage of gettimeofday inside Catch should no longer cause compilation errors.
• Improved -Wparentheses supression for gcc (#674)
  • When compiled with gcc 4.8 or newer, the supression is localized to assertions only
  • Otherwise it is supressed for the whole TU
• Fixed test spec parser issue (with escapes in multiple names)

Other

• Various documentation fixes and improvements

1.7.x

1.7.2

Fixes and minor improvements

Xml:

(technically the first two are breaking changes but are also fixes and arguably break few if any people)

• C-escape control characters instead of XML encoding them (which requires XML 1.1)
• Revert XML output to XML 1.0
• Can provide stylesheet references by extending the XML reporter
• Added description and tags attribites to XML Reporter
• Tags are closed and the stream flushed more eagerly to avoid stdout interpolation

Other:

• REQUIRE_THROWS_AS now catches exception by const& and reports expected type
• In SECTIONs the file/ line is now of the SECTION. not the TEST_CASE
• Added std:: qualification to some functions from C stdlib
• Removed use of RTTI (dynamic_cast) that had crept back in
• Silenced a few more warnings in different circumstances
• Travis improvements

1.7.1

Fixes:

• Fixed inconsistency in defining NOMINMAX and WIN32_LEAN_AND_MEAN inside catch.hpp.
• Fixed SEH-related compilation error under older MinGW compilers, by making Windows SEH handling opt-in for compilers other than MSVC.
  • For specifics, look into the documentation.
• Fixed compilation error under MinGW caused by improper compiler detection.
• Fixed XML reporter sometimes leaving an empty output file when a test ends with signal/structured exception.
• Fixed XML reporter not reporting captured stdout/stderr.
• Fixed possible infinite recursion in Windows SEH.
• Fixed possible compilation error caused by Catch's operator overloads being ambiguous in regards to user-defined templated operators.

1.7.0

Features/ Changes:

• Catch now runs significantly faster for passing tests
  • Microbenchmark focused on Catch's overhead went from ~3.4s to ~0.7s.
  • Real world test using JSON for Modern C++'s test suite went from ~6m 25s to ~4m 14s.
• Catch can now run specific sections within test cases.
  • For now the support is only basic (no wildcards or tags), for details see the documentation.
• Catch now supports SEH on Windows as well as signals on Linux.
  • After receiving a signal, Catch reports failing assertion and then passes the signal onto the previous handler.
• Approx can be used to compare values against strong typedefs (available in C++11 mode only).
  • Strong typedefs mean types that are explicitly convertible to double.
• CHECK macro no longer stops executing section if an exception happens.
• Certain characters (space, tab, etc) are now pretty printed.
  • This means that a char c = ' '; REQUIRE(c == '\t'); would be printed as ' ' == '\t', instead of == 9.

Fixes:

• Text formatting no longer attempts to access out-of-bounds characters under certain conditions.
• THROW family of assertions no longer trigger -Wunused-value on expressions containing explicit cast.
• Breaking into debugger under OS X works again and no longer required DEBUG to be defined.
• Compilation no longer breaks under certain compiler if a lambda is used inside assertion macro.

Other:

• Catch's CMakeLists now defines install command.
• Catch's CMakeLists now generates projects with warnings enabled.

1.6.x

1.6.1

Features/ Changes:

• Catch now supports breaking into debugger on Linux

Fixes:

• Generators no longer leak memory (generators are still unsupported in general)
• JUnit reporter now reports UTC timestamps, instead of "tbd"
• CHECK_THAT macro is now properly defined as CATCH_CHECK_THAT when using CATCH_ prefixed macros

Other:

• Types with overloaded && operator are no longer evaluated twice when used in an assertion macro.
• The use of __COUNTER__ is supressed when Catch is parsed by CLion
  • This change is not active when compiling a binary
• Approval tests can now be run on Windows
• CMake will now warn if a file is present in the include folder but not is not enumerated as part of the project
• Catch now defines NOMINMAX and WIN32_LEAN_AND_MEAN before including windows.h
  • This can be disabled if needed, see documentation for details.

1.6.0

Cmake/ projects:

• Moved CMakeLists.txt to root, made it friendlier for CLion and generating XCode and VS projects, and removed the manually maintained XCode and VS projects.

Features/ Changes:

• Approx now supports >= and <=
• Can now use \ to escape chars in test names on command line
• Standardize C++11 feature toggles

Fixes:

• Blue shell colour
• Missing argument to CATCH_CHECK_THROWS
• Don't encode extended ASCII in XML
• use std::shuffle on more compilers (fixes deprecation warning/error)
• Use __COUNTER__ more consistently (where available)

Other:

• Tweaks and changes to scripts - particularly for Approval test - to make them more portable

Even Older versions

Release notes were not maintained prior to v1.6.0, but you should be able to work them out from the Git history

---

Home