enabled external clock + implemented some weird operating modes using the rotary encoder

firmware/main.c

@@ -1,5 +1,19 @@
 #include <stm32f0xx.h>
 #include <cmsis/core_cm0.h>
+#include <stdbool.h>
+
+#define RING_MAX_LED	30u
+
+enum ring_modes {
+	RING_MODE_ALL,
+	RING_MODE_RED,
+	RING_MODE_GREEN,
+	RING_MODE_BLUE,
+	RING_MODE_WHITE,
+	RING_MODE_ARC,
+	RING_MODE_QUARTER,
+	RING_MODE_MAX
+};
 
 unsigned int i = 0x12345678;
 unsigned char c = 2;
@@ -16,17 +30,113 @@ static void wait_for_ticks(uint32_t ticks)
 
 int main(void)
 {
-	uint32_t led_val = 0xAAUL;
+	uint32_t led_val = 0x00UL;
+	uint32_t led_calc_val[RING_MAX_LED] = {0x00UL};
+	bool button_pressed = false;
+	enum ring_modes mode = RING_MODE_ALL;
 
 	RCC->AHBENR |= RCC_AHBENR_GPIOAEN;
-	GPIOA->MODER |= (1<<3*2);
+	RCC->APB1ENR |= RCC_APB1ENR_TIM3EN;
+
+	GPIOA->MODER |= (2<<7*2)|(2<<6*2)|(1<<3*2);
+
+	/* enable pullups on encoder inputs */
+	GPIOA->PUPDR |= (1<<7*2)|(1<<6*2)|(1<<0*2);
+	/* enable TIM3 on encoder inputs */
+	GPIOA->AFR[0] |= (1<<7*4)|(1<<6*4);
+
+	TIM3->ARR = 0xFFFF;
+	TIM3->CNT = 0;
+	TIM3->CR2 = 0;
+	TIM3->SMCR = TIM_SMCR_SMS_0;
+	TIM3->CCMR1 = TIM_CCMR1_CC1S_0 | TIM_CCMR1_CC2S_1;
+	TIM3->CCER = TIM_CCER_CC1P | TIM_CCER_CC2P;
+	TIM3->PSC = 0;
+	TIM3->CR1 = TIM_CR1_CEN;
+
 	SysTick_Config(800000);
 	while(1) {
+
+		switch (mode)
+		{
+		case RING_MODE_ALL:
+			for(int i = 0; i < RING_MAX_LED; i ++) {
+				led_calc_val[i] = (led_val << 24) + (led_val << 16) + (led_val << 8) + led_val; 
+			}
+			break;
+		case RING_MODE_RED:
+			for(int i = 0; i < RING_MAX_LED; i ++) {
+				led_calc_val[i] = led_val << 16;
+			}
+			break;
+		case RING_MODE_GREEN:
+			for(int i = 0; i < RING_MAX_LED; i ++) {
+				led_calc_val[i] = led_val << 24; 
+			}
+			break;
+		case RING_MODE_BLUE:
+			for(int i = 0; i < RING_MAX_LED; i ++) {
+				led_calc_val[i] = led_val << 8; 
+			}
+			break;
+		case RING_MODE_WHITE:
+			for(int i = 0; i < RING_MAX_LED; i ++) {
+				led_calc_val[i] = led_val; 
+			}
+			break;
+		case RING_MODE_ARC:
+			for(int i = 0; i < RING_MAX_LED; i ++) {
+				if(led_val > i*8) {
+					led_calc_val[i] = 0xFFFFFFFFUL; 
+				}
+				else {
+					led_calc_val[i] = 0x00000000UL;
+				}
+			}
+			break;
+		case RING_MODE_QUARTER:
+			for(int i = 0; i < RING_MAX_LED; i ++) {
+				if((led_val / 7 > i) && (led_val / 7 < (i + 7))) {
+					led_calc_val[i] = 0xFFFFFFFFUL; 
+				}
+				else {
+					led_calc_val[i] = 0x00000000UL;
+				}
+			}
+			break;
+		default:
+			for(int i = 0; i < RING_MAX_LED; i ++) {
+				led_calc_val[i] = 0x00000000UL;
+			}
+			break;
+		}
 		__disable_irq();
-		sk6812_send_led(led_val);
+		for(int i = 0; i < RING_MAX_LED; i ++) {
+			sk6812_send_led(led_calc_val[i]);
+		}
 		__enable_irq();
-		wait_for_ticks(30);
+		wait_for_ticks(5);
-		led_val += 20;
+
+		if((int16_t)TIM3->CNT > (int16_t)led_val) {
+			led_val = 0u;
+		}
+		else if(((int16_t)led_val - (int16_t)TIM3->CNT) > UINT8_MAX) {
+			led_val = 255u;
+		}
+		else {
+			led_val = (int16_t)led_val - (int16_t)TIM3->CNT;
+		}
+		TIM3->CNT = 0u;
+
+		if(button_pressed) {
+			if(GPIOA->IDR & GPIO_IDR_0) {
+				button_pressed = false;
+			}
+		}
+		else if(!(GPIOA->IDR & GPIO_IDR_0)) {
+			mode = (mode + 1) % RING_MODE_MAX;
+			button_pressed = true;
+		}
 	}
 }
 

firmware/setup/system_init.c

@@ -65,10 +65,17 @@ void __setup_clocks(void)
 {
 	uint32_t tmp;
 	
-	/* TODO: Switch HSE on for better accuracy */
+	/* Switch PLL source to HSE OSC */
+	RCC->CFGR |= RCC_CFGR_PLLSRC;
 
-	/* Switch PLL source to HSI OSC */
+	/* Divide HSE by 2 to match HSI */
-	RCC->CFGR &= ~RCC_CFGR_PLLSRC;
+	RCC->CFGR2 = 0x00000001;
+
+	/* Enable HSE and wait for it to become ready */
+	RCC->CR |= RCC_CR_HSEON;
+	
+	/* Wait for HSE to be ready */
+	while (!(RCC->CR & RCC_CR_HSERDY));
 
 	/* Set PLL multiplication to 12 (4 MHz * 12 = 48 MHz SysClk) */
 	RCC->CFGR |= RCC_CFGR_PLLMUL_3 | RCC_CFGR_PLLMUL_1;
@@ -84,6 +91,9 @@ void __setup_clocks(void)
 	tmp &= ~0x3;
 	tmp |= RCC_CFGR_SW_1;
 	RCC->CFGR = tmp;
+
+	/* Turn off HSI */
+	RCC->CR &= ~RCC_CR_HSEON;
 }
 
 void __system_init(void)