reflow-oven-control-sw/stm-firmware/stm-periph/dma-ring-buffer.c

/* Reflow Oven Controller
 *
 * Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
 *
 * This file is part of the Reflow Oven Controller Project.
 *
 * The reflow oven controller is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * The Reflow Oven Control Firmware is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with the reflow oven controller project.
 * If not, see <http://www.gnu.org/licenses/>.
 */

/**
 * @file dma-ring-buffer.c
 * @brief DMA Ring buffer implemenation
 */

/**
 * @addtogroup dma-ring-buffer
 * @{
 */

#include <stm-periph/dma-ring-buffer.h>
#include <stm-periph/rcc-manager.h>
#include <stdbool.h>
#include <string.h>

static size_t calculate_ring_buffer_fill_level(size_t buffer_size, size_t get_idx, size_t put_idx)
{
	size_t fill_level;

	if (put_idx >= get_idx)
		fill_level = (put_idx - get_idx);
	else
		fill_level = buffer_size - get_idx + put_idx;

	return fill_level;
}

static int dma_ring_buffer_switch_clock_enable(uint8_t base_dma, bool clk_en)
{
	int ret_val;
	int (*clk_func)(volatile uint32_t *reg, uint8_t bit_no);

	if (clk_en)
		clk_func = rcc_manager_enable_clock;
	else
		clk_func = rcc_manager_disable_clock;

	switch (base_dma) {
	case 1:
		ret_val = clk_func(&RCC->AHB1ENR, BITMASK_TO_BITNO(RCC_AHB1ENR_DMA1EN));
		break;
	case 2:
		ret_val = clk_func(&RCC->AHB1ENR, BITMASK_TO_BITNO(RCC_AHB1ENR_DMA2EN));
		break;
	default:
		ret_val = -1000;
		break;
	}

	return ret_val;
}

int dma_ring_buffer_periph_to_mem_initialize(struct dma_ring_buffer_to_mem *dma_buffer, uint8_t base_dma_id,
					     DMA_Stream_TypeDef *dma_stream, size_t buffer_element_count,
					     size_t element_size, volatile void *data_buffer,
					     void *src_reg, uint8_t dma_trigger_channel)
{
	int ret_val = 0;

	if (!dma_buffer || !dma_stream || !data_buffer || !src_reg)
		return -1000;

	if (dma_trigger_channel > 7)
		return -1007;

	dma_buffer->base_dma_id = base_dma_id;

	ret_val = dma_ring_buffer_switch_clock_enable(base_dma_id, true);
	if (ret_val)
		return ret_val;

	dma_buffer->dma = dma_stream;
	dma_buffer->get_idx = 0;
	dma_buffer->buffer_count = buffer_element_count;

	dma_buffer->data_ptr = data_buffer;
	dma_buffer->element_size = element_size;

	dma_stream->PAR = (uint32_t)src_reg;
	dma_stream->M0AR = (uint32_t)data_buffer;
	dma_stream->NDTR = buffer_element_count;
	dma_stream->NDTR = buffer_element_count;

	dma_stream->CR |= (dma_trigger_channel<<25) | DMA_SxCR_MINC | DMA_SxCR_CIRC | DMA_SxCR_EN;

	return 0;
}

int dma_ring_buffer_periph_to_mem_get_data(struct dma_ring_buffer_to_mem *buff, const volatile void **data_buff,
						size_t *len)
{
	int ret_code = 0;
	uint32_t ndtr;
	size_t put_idx;

	if (!buff || !data_buff || !len)
		return -1;

	ndtr = buff->dma->NDTR;
	put_idx = buff->buffer_count - ndtr;

	/* Check if wrap around */
	if (put_idx < buff->get_idx) {
		/* Available data wraps around end of buffer: Return first part upt to the end of the ring buffer */
		*data_buff = &(((char *)buff->data_ptr)[buff->get_idx * buff->element_size]);
		*len = buff->buffer_count - buff->get_idx;
		buff->get_idx = 0;
		ret_code = 2;
	} else if (put_idx > buff->get_idx) {
		/* Data does not wrap around ring buffer. Return full data */
		*data_buff = &(((char *)buff->data_ptr)[buff->get_idx * buff->element_size]);
		*len = put_idx - buff->get_idx;
		buff->get_idx += *len;
		ret_code = 1;
	} else {
		/* No new data */
		*len = 0;
	}

	return ret_code;
}

void dma_ring_buffer_periph_to_mem_stop(struct dma_ring_buffer_to_mem *buff)
{
	if (!buff || !buff->dma)
		return;

	buff->dma->CR = 0;
	buff->dma->NDTR = 0;
	buff->dma->M1AR = 0;
	buff->dma->FCR = 0;

	dma_ring_buffer_switch_clock_enable(buff->base_dma_id, false);

	memset(buff, 0, sizeof(struct dma_ring_buffer_to_mem));
}

int dma_ring_buffer_periph_to_mem_fill_level(struct dma_ring_buffer_to_mem *buff, size_t *fill_level)
{
	size_t put_idx;

	if (!buff || !fill_level)
		return -1000;

	put_idx = buff->buffer_count - buff->dma->NDTR;
	*fill_level = calculate_ring_buffer_fill_level(buff->buffer_count, buff->get_idx, put_idx);

	return 0;
}

int dma_ring_buffer_mem_to_periph_initialize(struct dma_ring_buffer_to_periph *dma_buffer, uint8_t base_dma_id,
					     DMA_Stream_TypeDef *dma_stream, size_t buffer_element_count,
					     size_t element_size, volatile void *data_buffer,
					     uint8_t dma_trigger_channel, void *dest_reg)
{
	if (!dma_buffer || !dma_stream || !data_buffer || !dest_reg)
		return -1000;

	dma_buffer->dma = dma_stream;
	dma_buffer->dma_base_id = base_dma_id;
	dma_buffer->src_buffer = data_buffer;
	dma_buffer->buffer_count = buffer_element_count;
	dma_buffer->element_size = element_size;
	dma_buffer->sw_put_idx = 0U;
	dma_buffer->dma_get_idx_current = 0U;
	dma_buffer->dma_get_idx_future = 0U;

	dma_ring_buffer_switch_clock_enable(base_dma_id, true);

	dma_stream->PAR = (uint32_t)dest_reg;
	dma_stream->CR = DMA_SxCR_MINC | DMA_SxCR_TCIE | (dma_trigger_channel<<25) | DMA_SxCR_DIR_0;

	return 0;
}

static void queue_or_start_dma_transfer(struct dma_ring_buffer_to_periph *buff)
{
	uint32_t dma_transfer_cnt;

	if (!buff)
		return;

	/* Check if DMA is running. Do nothing in this case. Will be stated from interrupt */
	if (buff->dma_get_idx_current != buff->dma_get_idx_future)
		return;

	/* No new data to transfer */
	if (buff->sw_put_idx == buff->dma_get_idx_current)
		return;

	/* Calculate future get idx. Stop at end of buffer to prevent impossible wrap around */
	if (buff->sw_put_idx < buff->dma_get_idx_current && buff->sw_put_idx != 0) {
		buff->dma_get_idx_future = 0U;
		dma_transfer_cnt = buff->buffer_count - buff->dma_get_idx_current;
	} else {
		buff->dma_get_idx_future = buff->sw_put_idx;
		if (buff->sw_put_idx == 0)
			dma_transfer_cnt = buff->buffer_count - buff->dma_get_idx_current;
		else
			dma_transfer_cnt = buff->sw_put_idx - buff->dma_get_idx_current;
	}

	buff->dma->NDTR = dma_transfer_cnt;
	buff->dma->M0AR = (uint32_t)&((char *)buff->src_buffer)[buff->dma_get_idx_current * buff->element_size];
	buff->dma->CR |= DMA_SxCR_EN;
}

int dma_ring_buffer_mem_to_periph_insert_data(struct dma_ring_buffer_to_periph *buff, const void *data_to_insert,
					      size_t count)
{
	int ret = 0;
	size_t free_item_count;
	char *insert_ptr;
	char *dest_ptr;
	void *ptr;
	size_t first_round_count;

	if (!buff || !data_to_insert || !count)
		return -1000;

	/* Check if data fits into buffer minus one element. If not: try full-1 buffer and rest
	 * Buffer is not allowed to be completely full, because I cannot ddifferentiate a full buffer from a
	 * completely empty one
	 */
	if (count >= buff->buffer_count) {
		ret = dma_ring_buffer_mem_to_periph_insert_data(buff, data_to_insert, buff->buffer_count - 1);
		if (ret)
			goto return_retval;
		ptr = (void *)(((char *)data_to_insert) + ((buff->buffer_count-1) * buff->element_size));
		ret = dma_ring_buffer_mem_to_periph_insert_data(buff, ptr, count - buff->buffer_count + 1);
		goto return_retval;
	}

	/* Wait for buffer to be able to handle input */
	do {
		free_item_count = buff->buffer_count -
				calculate_ring_buffer_fill_level(buff->buffer_count, buff->dma_get_idx_current,
								 buff->sw_put_idx);
	} while (free_item_count < count+1);

	/* Fillup buffer (max is buffer end, wrap around afterwards) */
	insert_ptr = (char *)data_to_insert;
	dest_ptr = &((char *)buff->src_buffer)[buff->sw_put_idx * buff->element_size];

	/* Check if data completely fits into memory starting from put index */
	if (buff->buffer_count - buff->sw_put_idx >= count) {
		/* Copy data and move put index */
		memcpy(dest_ptr, insert_ptr, buff->element_size * count);
		buff->sw_put_idx += count;

		/* If buffer is used up to last element, set put index to beginning */
		if (buff->sw_put_idx >= buff->buffer_count)
			buff->sw_put_idx = 0;
	} else {
		/* Fill up to end of buffer and fill rest after wrap around */
		first_round_count = buff->element_size * (buff->buffer_count - buff->sw_put_idx);
		memcpy(dest_ptr, insert_ptr, first_round_count);
		insert_ptr += first_round_count;
		memcpy((void *)buff->src_buffer, insert_ptr, count - first_round_count);

		/* Move put index */
		buff->sw_put_idx = count - first_round_count;
	}

	/* Queue the DMA transfer. If DMA is already enabled, this has no effect
	 * DMA is triggerd from interrupt in this case
	 */
	queue_or_start_dma_transfer(buff);

return_retval:
	return ret;
}

void dma_ring_buffer_mem_to_periph_int_callback(struct dma_ring_buffer_to_periph *buff)
{
	/* update current get index because DMA is finished */
	buff->dma_get_idx_current = buff->dma_get_idx_future;

	/* Start new DMA transfer if not all data is trasnferred yet */
	queue_or_start_dma_transfer(buff);
}

void dma_ring_buffer_mem_to_periph_stop(struct dma_ring_buffer_to_periph *buff)
{
	/* Stop DMA and clock */
	buff->dma->CR = 0;
	dma_ring_buffer_switch_clock_enable(buff->dma_base_id, false);

	/* Reset the structure */
	memset(buff, 0, sizeof(struct dma_ring_buffer_to_periph));
}

int dma_ring_buffer_mem_to_periph_fill_level(struct dma_ring_buffer_to_periph *buff, size_t *fill_level)
{
	if (!buff || !fill_level)
		return -1000;

	*fill_level = calculate_ring_buffer_fill_level(buff->buffer_count, buff->dma_get_idx_current, buff->sw_put_idx);

	return 0;
}

/** @} */