Merge pull request 'Update develop. Ready for pre-release v0.4' (#49) from dev into master

Reviewed-on: #49

stm-firmware/.gitignore

@@ -16,3 +16,10 @@ reflow-controller.includes
 *.files
 *.user.*
 *.user
+
+# VSCODE and CLANGD sepcific excludes
+
+.vscode/
+build/
+.cache/
+compile_commands.json

stm-firmware/CMakeLists.txt

@@ -1,7 +1,7 @@
 set(CMAKE_SYSTEM_NAME Generic)
 set(CMAKE_SYSTEM_PROCESSOR arm)
 set(CMAKE_CROSSCOMPILING 1)
-cmake_minimum_required(VERSION 3.0)
+cmake_minimum_required(VERSION 3.18)
 
 set(CMAKE_TOOLCHAIN_FILE "arm-none-eabi-gcc.cmake")
 
@@ -43,26 +43,12 @@ else (GIT_FOUND)
 	message("Version is set to: ${GIT_DESCRIBE}${ColorReset}")
 endif (GIT_FOUND)
 
-find_program(VIRTUALENV virtualenv)
+find_program(PATCHELFCRC patchelfcrc)
-if (VIRTUALENV)
+if (PATCHELFCRC)
-	message("Python virtual environment found")
+	message("patchelfcrc found: ${PATCHELFCRC}")
-	execute_process(
+else(PATCHELFCRC)
-		COMMAND ${VIRTUALENV} venv
+	message(FATAL_ERROR "${BoldRed}Patchelfcrc not found. Cannot patch CRC checksum into ELF file: patchelfcrc: command not found! See: https://git.shimatta.de/mhu/patchelfcrc${ColorReset}")
-		WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
+endif (PATCHELFCRC)
-		OUTPUT_QUIET
-		COMMAND_ERROR_IS_FATAL ANY
-	)
-	set(VENV_BIN "${CMAKE_CURRENT_BINARY_DIR}/venv/bin")
-	execute_process(
-		COMMAND ./pip install -r "${CMAKE_CURRENT_SOURCE_DIR}/crc-patcher/requirements.txt"
-		WORKING_DIRECTORY ${VENV_BIN}
-		OUTPUT_QUIET
-		COMMAND_ERROR_IS_FATAL ANY
-	)
-	message("${BoldGreen}python virtual environment set up!${ColorReset}")
-else(VIRTUALENV)
-	message(FATAL_ERROR "${BoldRed}Python virtual environment not set up: virtualenv: command not found!${ColorReset}")
-endif (VIRTUALENV)
 
 
 set(ELFFILE ${PROJECT_NAME}.elf)
@@ -71,7 +57,7 @@ set(MAPFILE ${PROJECT_NAME}.map)
 set(LINKER_SCRIPT ${CMAKE_CURRENT_SOURCE_DIR}/stm32f407vet6_flash.ld)
 
 add_compile_options(-Wall -Wextra -Wold-style-declaration -Wuninitialized -Wmaybe-uninitialized -Wunused-parameter)
-add_compile_options(-mlittle-endian -mthumb -mcpu=cortex-m4 -mthumb-interwork -mfloat-abi=hard -mfpu=fpv4-sp-d16 -nostartfiles -Wimplicit-fallthrough=3 -Wsign-compare)
+add_compile_options(-mlittle-endian -mthumb -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -nostartfiles -Wimplicit-fallthrough=3 -Wsign-compare)
 
 
 set(GIT_DESCRIBE "${GIT_DESCRIBE}")
@@ -124,15 +110,15 @@ add_executable(${ELFFILE} ${MAIN_SOURCES} ${CFG_PARSER_SRCS} ${UI_SRCS}
 add_dependencies(${ELFFILE} updater-ram-code-header-blob)		
 
 target_include_directories(${ELFFILE} PRIVATE ${CMAKE_CURRENT_SOURCE_DIR}/shellmatta/api ${CMAKE_CURRENT_SOURCE_DIR}/config-parser/include)
-target_link_options(${ELFFILE} PRIVATE -mlittle-endian -mthumb -mcpu=cortex-m4 -mthumb-interwork -mfloat-abi=hard -mfpu=fpv4-sp-d16 --disable-newlib-supplied-syscalls -nostartfiles -T${LINKER_SCRIPT} -Wl,--print-memory-usage)
+target_link_options(${ELFFILE} PRIVATE -mlittle-endian -mthumb -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 --disable-newlib-supplied-syscalls -nostartfiles -T${LINKER_SCRIPT} -Wl,--print-memory-usage)
 target_link_libraries(${ELFFILE} base64-lib linklist-lib)
 target_include_directories(${ELFFILE} PRIVATE "${CMAKE_CURRENT_BINARY_DIR}/updater/ram-code/include/")
 
 add_custom_command(
     TARGET ${ELFFILE}
     POST_BUILD
-    COMMAND ./python "${CMAKE_CURRENT_SOURCE_DIR}/crc-patcher/crc-patch-elf.py" "${CMAKE_CURRENT_BINARY_DIR}/${ELFFILE}"
+    COMMAND ${PATCHELFCRC} --little-endian --verbose --granularity word --start-magic 0xa8be53f9 --end-magic 0xffa582ff -O .flashcrc -p crc-32-mpeg -S .text -S .data -S .ccmdata -S .vectors "${CMAKE_CURRENT_BINARY_DIR}/${ELFFILE}"
-    WORKING_DIRECTORY ${VENV_BIN}
+    WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
     COMMENT "Running Flash CRC Patcher"
     )
 

stm-firmware/config-parser/config-parser.c

@@ -28,7 +28,14 @@
 #include <stdio.h>
 #include <stdlib.h>
 
+/**
+ * @brief Config parser magic value used to check sanity of passed structs
+ */
 #define CONFIG_PARSER_MAGIC 0x464a6e2bUL
+
+/**
+ * @brief Config parser type casting macro
+ */
 #define CONFIG_PARSER(p) ((struct config_parser *)(p))
 
 /**

stm-firmware/crc-patcher/crc-patch-elf.py

@@ -1,114 +0,0 @@
-#!/bin/python
-
-"""
-This script patches the CRC checksums into an existing ELF file.
-
-For this, it searches the follwoing sections:
-	1) .text
-	2) .data
-	3) .ccmdata
-	4) .vectors
-
-All sections MUST be a multiple of 4 bytes long because the CRC calculation relies on whole 32 bit words.
-The sections are excrated and the CRC is calculated for each section.
-
-In the section .flashcrc, the script expects a single struct with the prototype:
-struct flash_crcs {
-	uint32_t start_magic;
-	uint32_t crc_section_text;
-	uint32_t crc_section_data;
-	uint32_t crc_section_ccm_data;
-	uint32_t crc_section_vectors;
-	uint32_t end_magic;
-};
-
-It checks, if the start magic and end magic are set to the appropriate values and then patches in the CRC values of the sections.
-The magic values checked for are: 0xA8BE53F9 and 0xFFA582FF
-"""
-from elftools.elf.elffile import ELFFile
-from elftools.elf.segments import Segment
-import elftools.elf.constants as elf_const
-import sys
-import crcmod
-import crcmod.predefined
-import struct
-
-crc_calc = crcmod.predefined.mkCrcFun('crc-32-mpeg')
-
-if len(sys.argv) < 2:
-	print("Usage:", sys.argv[0], ' <elf file>')
-	sys.exit(-1)
-
-filename=sys.argv[1]
-
-def section_calculate_crc(section):
-	data = bytearray(section.data())
-	be_data = bytearray([0 for k in range(0, len(data))])
-	# Rearrange data, because the STM controller sees it as 32 bit little endian words
-	for i in range(0, int(len(data)/4)):
-		be_data[i*4+0] = data[i*4+3]
-		be_data[i*4+1] = data[i*4+2]
-		be_data[i*4+2] = data[i*4+1]
-		be_data[i*4+3] = data[i*4+0]
-
-	return crc_calc(be_data)
-
-with open(filename, 'r+b') as f:
-	elf = ELFFile(f)
-	sections = {}
-	sections['.text'] = elf.get_section_by_name('.text')
-	sections['.data'] = elf.get_section_by_name('.data')
-	sections['.ccmdata'] = elf.get_section_by_name('.ccmdata')
-	sections['.vectors'] = elf.get_section_by_name('.vectors')
-
-	for key, sec in sections.items():
-		if sec is None:
-			print("Error! Section", key, "not found in ELF file!")
-			sys.exit(-1)
-		print('Found section', key, 'Size:',
-			  sec.data_size, 'Type:', sec['sh_type'])
-		if sec['sh_type'] != 'SHT_PROGBITS':
-			print('Error! Section must be of type SHT_PROGBITS')
-			sys.exit(-1)
-		if (sec.data_size % 4 != 0):
-			print("Section", key, "has wrong size. Must be a multiple of 4 bytes!")
-			sys.exit(-1)
-
-	text_crc = section_calculate_crc(sections['.text'])
-	print('CRC of .text section:', hex(text_crc))
-	data_crc = section_calculate_crc(sections['.data'])
-	print('CRC of .data section:', hex(data_crc))
-	ccmdata_crc = section_calculate_crc(sections['.ccmdata'])
-	print('CRC of .ccmdata section:', hex(ccmdata_crc))
-	vextors_crc = section_calculate_crc(sections['.vectors'])
-	print('CRC of .vectors section:', hex(vextors_crc))
-
-	# Check the flashcrc section
-	flashcrc_sec = elf.get_section_by_name('.flashcrc')
-	if flashcrc_sec is None:
-		print('Section for flash CRC missing!')
-		sys.exit(-1)
-	if flashcrc_sec.data_size != 6*4:
-		print("Error: .flashcrc section has wrong size:",flashcrc_sec.data_size)
-		sys.exit(-1);
-
-	crc_sec_data = bytearray(flashcrc_sec.data())
-	magic1 = struct.unpack('<I'*1, bytes(crc_sec_data[0:4]))[0]
-	magic2 = struct.unpack('<I'*1, bytes(crc_sec_data[-4:]))[0]
-	print("CRC section magic values:", hex(magic1), hex(magic2))
-	if magic1 != 0xA8BE53F9 or magic2 != 0xFFA582FF:
-		print("Wrong magics in CRC section. Data misalignment?")
-		sys.exit(-2)
-
-	crc_sec_offset = flashcrc_sec['sh_offset']
-	print('CRC section ELF file offset:', hex(crc_sec_offset))
-	
-	crc_sec_data[4:8] = struct.pack('<I',text_crc)
-	crc_sec_data[8:12] = struct.pack('<I',data_crc)
-	crc_sec_data[12:16] = struct.pack('<I',ccmdata_crc)
-	crc_sec_data[16:20] = struct.pack('<I',vextors_crc)
-	f.seek(crc_sec_offset)
-	f.write(crc_sec_data)
-	print('CRCs patched successfully')
-
-	

stm-firmware/crc-patcher/requirements.txt

@@ -1,2 +0,0 @@
-crcmod==1.7
-pyelftools==0.27

stm-firmware/create-c-file-with-header.py

@@ -6,7 +6,7 @@ import pathlib
 
 license_header = """/* Reflow Oven Controller
 *
-* Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+* Copyright (C) 2022  Mario Hüttel <mario.huettel@gmx.net>
 *
 * This file is part of the Reflow Oven Controller Project.
 *
@@ -37,7 +37,7 @@ cpath = os.path.join(project_dir, sys.argv[1]+'.c')
 hfile = sys.argv[1]+'.h'
 hpath = os.path.join(module_include_dir, hfile)
 
-h_define = '__'+hfile.replace('.', '_').replace('-', '_').replace('/', '_').upper()+'__'
+h_define = '_'+hfile.replace('.', '_').replace('-', '_').replace('/', '_').upper()+'_'
 
 if os.path.exists(cpath) or os.path.exists(hpath):
 	print("File already exists! Abort!")

stm-firmware/hw-version-detect.c

@@ -27,10 +27,15 @@
 #include <stm-periph/rcc-manager.h>
 #include <stm32/stm32f4xx.h>
 
+#if HW_REV_DETECT_PIN_LOW > HW_REV_DETECT_PIN_HIGH
+#error Configuration error for Hardware derection pins. Lowest position must be less than the highest pin position.
+#endif
+
 enum hw_revision get_pcb_hardware_version(void)
 {
 	uint8_t current_pin;
-	uint16_t port_bitmask = 0U;
+	uint16_t port_bitmask = 0U; /* Use uint16_t because a port can have 16 IOs max. */
+	const uint16_t highest_bit_mask = (1 << (HW_REV_DETECT_PIN_HIGH - HW_REV_DETECT_PIN_LOW));
 	static enum hw_revision revision = HW_REV_NOT_DETECTED;
 
 	/* If the revision has been previously detected,
@@ -53,7 +58,7 @@ enum hw_revision get_pcb_hardware_version(void)
 	 */
 	for (current_pin = HW_REV_DETECT_PIN_LOW; current_pin <= HW_REV_DETECT_PIN_HIGH; current_pin++) {
 		port_bitmask >>= 1;
-		port_bitmask |= (HW_REV_DETECT_GPIO->IDR & (1 << current_pin)) ? 0x0 : 0x80;
+		port_bitmask |= (HW_REV_DETECT_GPIO->IDR & (1 << current_pin)) ? 0x0 : highest_bit_mask;
 	}
 
 	/* Resolve the read in bitmask to a hardware version */

stm-firmware/include/reflow-controller/hw-version-detect.h

@@ -48,7 +48,6 @@
  */
 #define HW_REV_DETECT_PIN_HIGH (15U)
 
-
 /**
  * @brief PCB/Hardware Revision Type
  */

stm-firmware/include/reflow-controller/safety/flash-crc-struct.h

@@ -0,0 +1,37 @@
+/* Reflow Oven Controller
+*
+* Copyright (C) 2022  Mario Hüttel <mario.huettel@gmx.net>
+*
+* This file is part of the Reflow Oven Controller Project.
+*
+* The reflow oven controller is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+* The Reflow Oven Control Firmware is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with the reflow oven controller project.
+* If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _SAFETY_FLASH_CRC_STRUCT_H_
+#define _SAFETY_FLASH_CRC_STRUCT_H_
+
+#include <stdint.h>
+
+struct flash_crcs {
+    uint32_t start_magic;
+    uint32_t crc_section_text;
+    uint32_t crc_section_data;
+    uint32_t crc_section_ccm_data;
+    uint32_t crc_section_vectors;
+    uint32_t end_magic;
+};
+
+extern const struct flash_crcs crcs_in_flash;
+
+#endif /* _SAFETY_FLASH_CRC_STRUCT_H_ */

stm-firmware/include/reflow-controller/safety/flash-crc.h

@@ -0,0 +1,56 @@
+/* Reflow Oven Controller
+*
+* Copyright (C) 2022  Mario Hüttel <mario.huettel@gmx.net>
+*
+* This file is part of the Reflow Oven Controller Project.
+*
+* The reflow oven controller is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+* The Reflow Oven Control Firmware is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with the reflow oven controller project.
+* If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _SAFETY_FLASH_CRC_H_
+#define _SAFETY_FLASH_CRC_H_
+
+#include <stdint.h>
+
+enum flash_crc_section {
+    FLASH_CRC_VECTOR = 0,
+    FLASH_CRC_TEXT,
+    FLASH_CRC_DATA,
+    FLASH_CRC_CCMDATA,
+    N_FLASH_CRC,
+};
+
+/**
+ * @brief Perform a CRC check of the flash memory and set appropriate flags
+ * @return negative if internal error occured. Otherwise (independent from CRC check result) 0.
+ * @note This function requires the safety controller (and CRC unit) to be set up before calling!
+ */
+int flash_crc_trigger_check(void);
+
+/**
+ * @brief Calculate CRC over flash section
+ * @param sec Section to calculate CRC over
+ * @param[out] crc_result Calculated CRC
+ * @return negative if internal error occured. Otherwise (independent from CRC check result) 0.
+ */
+int flash_crc_calc_section(enum flash_crc_section sec, uint32_t *crc_result);
+
+/**
+ * @brief Get expected CRC value of a section
+ * @param sec Section
+ * @return Expected CRC
+ */
+uint32_t flash_crc_get_expected_crc(enum flash_crc_section sec);
+
+#endif /* _SAFETY_FLASH_CRC_H_ */

stm-firmware/include/reflow-controller/safety/safety-config.h

@@ -27,6 +27,15 @@
 #ifndef __SAFETY_CONFIG_H__
 #define __SAFETY_CONFIG_H__
 
+/**
+ * @brief Weights of error flags.
+ */
+enum config_weight {
+    SAFETY_FLAG_CONFIG_WEIGHT_NONE = 0, /**< @brief This flag has no global error consequence, but might be respected by certain software modules. */
+    SAFETY_FLAG_CONFIG_WEIGHT_PID = 1, /**< @brief This flag will force a stop of the temperature PID controller */
+    SAFETY_FLAG_CONFIG_WEIGHT_PANIC = 2, /**< @brief This flag will trigger the panic mode */
+};
+
 /**
  * @brief Enum type representing safety flags.
  *
@@ -159,7 +168,7 @@ enum analog_value_monitor {
 #define SAFETY_CRC_MON_SAFETY_ADC_PW 0xA8DF2368
 
 /**
- * @brief Default persistence of safety flags. These values are loaded into the safety tables on startup
+ * @brief Default persistence of safety flags. These values are loaded into the safety tables on startup.
  */
 #define SAFETY_CONFIG_DEFAULT_PERSIST	ERR_FLAG_PERSIST_ENTRY(ERR_FLAG_MEAS_ADC_OFF, false), \
 					ERR_FLAG_PERSIST_ENTRY(ERR_FLAG_MEAS_ADC_WATCHDOG, false), \
@@ -183,9 +192,9 @@ enum analog_value_monitor {
 					ERR_FLAG_PERSIST_ENTRY(ERR_FLAG_FLASH_CRC_CODE, true), \
 					ERR_FLAG_PERSIST_ENTRY(ERR_FLAG_FLASH_CRC_DATA, true), \
 					ERR_FLAG_PERSIST_ENTRY(ERR_FLAG_CFG_CRC_MEAS_ADC, true), \
-					ERR_FLAG_PERSIST_ENTRY(ERR_FLAG_CFG_CRC_SAFETY_ADC, true), \
+					ERR_FLAG_PERSIST_ENTRY(ERR_FLAG_CFG_CRC_SAFETY_ADC, true)
 /**
- * @brief Default config weights of safety flags. These values are loaded into the safety tables on startup
+ * @brief Default config weights of safety flags. These values are loaded into the safety tables on startup.
  */
 #define SAFETY_CONFIG_DEFAULT_WEIGHTS 	ERR_FLAG_WEIGHT_ENTRY(ERR_FLAG_MEAS_ADC_OFF, SAFETY_FLAG_CONFIG_WEIGHT_PID), \
 			ERR_FLAG_WEIGHT_ENTRY(ERR_FLAG_MEAS_ADC_WATCHDOG, SAFETY_FLAG_CONFIG_WEIGHT_PID), \
@@ -206,9 +215,9 @@ enum analog_value_monitor {
 			ERR_FLAG_WEIGHT_ENTRY(ERR_FLAG_SAFETY_TAB_CORRUPT, SAFETY_FLAG_CONFIG_WEIGHT_PANIC), \
 			ERR_FLAG_WEIGHT_ENTRY(ERR_FLAG_AMON_SUPPLY_VOLT, SAFETY_FLAG_CONFIG_WEIGHT_PID), \
 			ERR_FLAG_WEIGHT_ENTRY(ERR_FLAG_OVERTEMP, SAFETY_FLAG_CONFIG_WEIGHT_PID), \
-			ERR_FLAG_WEIGHT_ENTRY(ERR_FLAG_FLASH_CRC_CODE, SAFETY_FLAG_CONFIG_WEIGHT_NONE), \
+			ERR_FLAG_WEIGHT_ENTRY(ERR_FLAG_FLASH_CRC_CODE, SAFETY_FLAG_CONFIG_WEIGHT_PANIC), \
-			ERR_FLAG_WEIGHT_ENTRY(ERR_FLAG_FLASH_CRC_DATA, SAFETY_FLAG_CONFIG_WEIGHT_NONE), \
+			ERR_FLAG_WEIGHT_ENTRY(ERR_FLAG_FLASH_CRC_DATA, SAFETY_FLAG_CONFIG_WEIGHT_PANIC), \
-			ERR_FLAG_WEIGHT_ENTRY(ERR_FLAG_CFG_CRC_MEAS_ADC, SAFETY_FLAG_CONFIG_WEIGHT_NONE), \
+			ERR_FLAG_WEIGHT_ENTRY(ERR_FLAG_CFG_CRC_MEAS_ADC, SAFETY_FLAG_CONFIG_WEIGHT_PID), \
-			ERR_FLAG_WEIGHT_ENTRY(ERR_FLAG_CFG_CRC_SAFETY_ADC, SAFETY_FLAG_CONFIG_WEIGHT_NONE), \
+			ERR_FLAG_WEIGHT_ENTRY(ERR_FLAG_CFG_CRC_SAFETY_ADC, SAFETY_FLAG_CONFIG_WEIGHT_PANIC)
 
 #endif /* __SAFETY_CONFIG_H__ */

stm-firmware/include/reflow-controller/safety/safety-controller.h

@@ -75,9 +75,9 @@ void safety_controller_init(void);
 /**
  * @brief Handle the safety controller.
  * @note This function must be executed periodically in order to prevent the watchdog from resetting the firmware
- * @return 0 if successful
+ * @returns Worst flag weigth that is currently set.
  */
-int safety_controller_handle(void);
+enum config_weight safety_controller_handle(void);
 
 /**
  * @brief Report one or multiple errors to the safety controller
@@ -267,13 +267,6 @@ int safety_controller_set_overtemp_limit(float over_temperature);
  */
 float safety_controller_get_overtemp_limit(void);
 
-/**
- * @brief Perform a CRC check of the flash memory and set appropriate flags
- * @return negative if internal error occured. Otherwise (independent from CRC check result) 0.
- * @note This function requires the safety controller to be set up before!
- */
-int safety_controller_trigger_flash_crc_check(void);
-
 /**
  * @brief Recalculate the CRC of a given CRC Monitor. This has to be done once the supervised registers update
  * @param mon Monitor to recalculate

stm-firmware/include/reflow-controller/safety/safety-memory.h

@@ -24,6 +24,7 @@
 #include <stdint.h>
 #include <stddef.h>
 #include <stdbool.h>
+#include <reflow-controller/safety/safety-config.h>
 
 /** @addtogroup safety-memory
  * @{
@@ -131,15 +132,6 @@ enum config_override_entry_type {
 	SAFETY_MEMORY_CONFIG_OVERRIDE_PERSISTENCE = 2,
 };
 
-/**
- * @brief Weights of error flags.
- */
-enum config_weight {
-	SAFETY_FLAG_CONFIG_WEIGHT_NONE = 0, /**< @brief This flag has no global error consequence, but might be respected by certain software modules. */
-	SAFETY_FLAG_CONFIG_WEIGHT_PID = 1, /**< @brief This flag will force a stop of the temperature PID controller */
-	SAFETY_FLAG_CONFIG_WEIGHT_PANIC = 2, /**< @brief This flag will trigger the panic mode */
-};
-
 /**
  * @brief representation of a config override memory entry
  */

stm-firmware/include/reflow-controller/sd.h

@@ -0,0 +1,42 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2022  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * GDSII-Converter is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+ #ifndef _SD_H_
+ #define _SD_H_
+
+#include <stdbool.h>
+#include <fatfs/ff.h>
+
+/**
+ * @brief Mount the SD card if available and not already mounted
+ * @param fs Filesystem to mount to.
+ * @return true if mounted, false if an error occured or the SD is not inserted and cannot be mounted
+ */
+bool mount_sd_card_if_avail(FATFS *fs);
+
+/**
+ * @brief Return whether an SD card is inserted and mounted
+ * 
+ * @return true SD inserted and mounted
+ * @return false No SD inserted or not mounted
+ */
+bool sd_card_is_mounted(void);
+
+#endif /* _SD_H_ */

stm-firmware/main.c

@@ -32,13 +32,13 @@
 #include <reflow-controller/systick.h>
 #include <reflow-controller/adc-meas.h>
 #include <reflow-controller/digio.h>
-#include "fatfs/shimatta_sdio_driver/shimatta_sdio.h"
 #include <stm-periph/stm32-gpio-macros.h>
 #include <stm-periph/rcc-manager.h>
 #include <stm-periph/uart.h>
 #include <reflow-controller/periph-config/shell-uart-config.h>
 #include <reflow-controller/oven-driver.h>
 #include <fatfs/ff.h>
+#include <reflow-controller/sd.h>
 #include <reflow-controller/ui/gui.h>
 #include <reflow-controller/ui/shell.h>
 #include <reflow-controller/ui/shell-uart.h>
@@ -88,40 +88,6 @@ static inline void uart_gpio_config(void)
 #endif
 }
 
-/**
- * @brief Mount the SD card if available and not already mounted
- * @param mounted The current mounting state of the SD card
- * @return true if mounted, false if an error occured or the SD is not inserted and cannot be mounted
- */
-static bool mount_sd_card_if_avail(bool mounted)
-{
-	FRESULT res;
-	static uint8_t IN_SECTION(.ccm.bss) inserted_counter = 0;
-
-	if (sdio_check_inserted() && mounted) {
-		memset(fs_ptr, 0, sizeof(FATFS));
-		sdio_stop_clk();
-		inserted_counter = 0;
-		return false;
-	}
-
-	if (!sdio_check_inserted() && inserted_counter < 255)
-		inserted_counter++;
-
-	if (!sdio_check_inserted() && !mounted && inserted_counter > 4) {
-		inserted_counter = 0;
-		res = f_mount(fs_ptr, "0:/", 1);
-		if (res == FR_OK) {
-			led_set(1, 1);
-			return true;
-		} else {
-			return false;
-		}
-	}
-
-	return mounted;
-}
-
 /**
  * @brief Process the boot status structure in the safety (backup) RAM
  * Depending on the flags set there, this function will:
@@ -286,6 +252,7 @@ int main(void)
 	shellmatta_handle_t shell_handle;
 	int menu_wait_request;
 	uint64_t quarter_sec_timestamp = 0ULL;
+	enum config_weight worst_safety_flag = SAFETY_FLAG_CONFIG_WEIGHT_NONE;
 
 	/** - Setup all the peripherals and external componets like LCD, EEPROM etc. and the safety controller */
 	setup_system();
@@ -312,9 +279,9 @@ int main(void)
 		 *  it is tried to load it from SD card.
 		 */
 		if (systick_ticks_have_passed(quarter_sec_timestamp, 250)) {
-			led_set(1, 0);
+			led_set(1u, 0);
 			sd_old = sd_card_mounted;
-			sd_card_mounted = mount_sd_card_if_avail(sd_card_mounted);
+			sd_card_mounted = mount_sd_card_if_avail(fs_ptr);
 
 			if (sd_card_mounted && !sd_old) {
 				adc_pt1000_get_resistance_calibration(NULL, NULL, &cal_active);
@@ -325,6 +292,14 @@ int main(void)
 				}
 			}
 
+			/* Check if any flags are present, that disable the PID controller. Blink
+			 * LED 0 in this case
+			 */
+			if (worst_safety_flag >= SAFETY_FLAG_CONFIG_WEIGHT_PID)
+				led_set(0u, led_get(0u) ? 0 : 1);
+			else
+				led_set(0u, 0);
+
 			quarter_sec_timestamp = systick_get_global_tick();
 		}
 
@@ -338,7 +313,7 @@ int main(void)
 		temp_profile_executer_handle();
 
 		/** - Handle the safety controller. This must be called! Otherwise a watchdog reset will occur */
-		safety_controller_handle();
+		worst_safety_flag = safety_controller_handle();
 
 		/** - If the Oven PID controller is running, we handle its sample function */
 		if (oven_pid_get_status() == OVEN_PID_RUNNING)

stm-firmware/safety/flash-crc-struct.c

@@ -0,0 +1,31 @@
+/* Reflow Oven Controller
+*
+* Copyright (C) 2022  Mario Hüttel <mario.huettel@gmx.net>
+*
+* This file is part of the Reflow Oven Controller Project.
+*
+* The reflow oven controller is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+* The Reflow Oven Control Firmware is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with the reflow oven controller project.
+* If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <reflow-controller/safety/flash-crc-struct.h>
+#include <helper-macros/helper-macros.h>
+
+const struct flash_crcs IN_SECTION(.flashcrc) crcs_in_flash = {
+	.start_magic = 0xA8BE53F9UL,
+	.crc_section_ccm_data = 0UL,
+	.crc_section_text = 0UL,
+	.crc_section_data = 0UL,
+	.crc_section_vectors = 0UL,
+	.end_magic = 0xFFA582FFUL,
+};

stm-firmware/safety/flash-crc.c

@@ -0,0 +1,152 @@
+/* Reflow Oven Controller
+*
+* Copyright (C) 2022  Mario Hüttel <mario.huettel@gmx.net>
+*
+* This file is part of the Reflow Oven Controller Project.
+*
+* The reflow oven controller is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+* The Reflow Oven Control Firmware is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with the reflow oven controller project.
+* If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <reflow-controller/safety/flash-crc.h>
+#include <reflow-controller/safety/flash-crc-struct.h>
+#include <reflow-controller/safety/safety-controller.h>
+#include <stm-periph/crc-unit.h>
+
+extern const uint32_t __ld_vectors_start;
+extern const uint32_t __ld_vectors_end;
+extern const uint32_t __ld_text_start;
+extern const uint32_t __ld_text_end;
+
+extern const uint32_t __ld_sdata_ccm;
+extern const uint32_t __ld_edata_ccm;
+extern const uint32_t __ld_load_ccm_data;
+
+extern const uint32_t __ld_sdata;
+extern const uint32_t __ld_edata;
+extern const uint32_t __ld_load_data;
+
+
+int flash_crc_trigger_check(void)
+{
+	int ret = -1;
+	int res;
+	int any_err = 0;
+	uint32_t crc;
+
+	/* Perform CRC check over vector table */
+	res = flash_crc_calc_section(FLASH_CRC_VECTOR, &crc);
+	if (res || crc != flash_crc_get_expected_crc(FLASH_CRC_VECTOR))
+		safety_controller_report_error(ERR_FLAG_FLASH_CRC_CODE);
+	any_err |= res;
+
+	/* Perform CRC check over text section */
+	res = flash_crc_calc_section(FLASH_CRC_TEXT, &crc);
+	if (res || crc != flash_crc_get_expected_crc(FLASH_CRC_TEXT))
+		safety_controller_report_error(ERR_FLAG_FLASH_CRC_CODE);
+	any_err |= res;
+
+	/* Perform CRC check over data section */
+	res = flash_crc_calc_section(FLASH_CRC_DATA, &crc);
+	if (res || crc != flash_crc_get_expected_crc(FLASH_CRC_DATA))
+		safety_controller_report_error(ERR_FLAG_FLASH_CRC_DATA);
+	any_err |= res;
+
+	/* Perform CRC check over ccm data section */
+	res = flash_crc_calc_section(FLASH_CRC_CCMDATA, &crc);
+	if (res || crc != flash_crc_get_expected_crc(FLASH_CRC_CCMDATA))
+		safety_controller_report_error(ERR_FLAG_FLASH_CRC_DATA);
+	any_err |= res;
+
+	if (!any_err)
+		ret = 0;
+
+	return ret;
+}
+
+int flash_crc_calc_section(enum flash_crc_section sec, uint32_t *crc_result)
+{
+	uint32_t len;
+	const uint32_t *startptr;
+	const uint32_t *endptr;
+	const uint32_t *load_addr = NULL;
+
+	if (!crc_result)
+		return -1002;
+
+	switch (sec) {
+	case FLASH_CRC_VECTOR:
+		startptr = &__ld_vectors_start;
+		endptr = &__ld_vectors_end;
+		break;
+	case FLASH_CRC_TEXT:
+		startptr = &__ld_text_start;
+		endptr = &__ld_text_end;
+		break;
+	case FLASH_CRC_DATA:
+		startptr = &__ld_sdata;
+		endptr = &__ld_edata;
+		load_addr = &__ld_load_data;
+		break;
+	case FLASH_CRC_CCMDATA:
+		startptr = &__ld_sdata_ccm;
+		endptr = &__ld_edata_ccm;
+		load_addr = &__ld_load_ccm_data;
+		break;
+	default:
+		return -1001;
+	}
+
+	len = (uint32_t)((void *)endptr - (void *)startptr);
+	if (!load_addr)
+		load_addr = startptr;
+
+	/* Not a multiple of 32bit words long. Cannot calculate CRC in this case! */
+	if (len % 4)
+		return -1;
+
+	/* Calculate word count */
+	len /= 4;
+
+	/* Reset CRC and calculate over data range */
+	crc_unit_reset();
+	crc_unit_input_array(load_addr, len);
+	*crc_result = crc_unit_get_crc();
+
+	return 0;
+}
+
+uint32_t flash_crc_get_expected_crc(enum flash_crc_section sec)
+{
+	uint32_t crc;
+
+	switch (sec) {
+	case FLASH_CRC_VECTOR:
+		crc = crcs_in_flash.crc_section_vectors;
+		break;
+	case FLASH_CRC_TEXT:
+		crc = crcs_in_flash.crc_section_text;
+		break;
+	case FLASH_CRC_DATA:
+		crc = crcs_in_flash.crc_section_data;
+		break;
+	case FLASH_CRC_CCMDATA:
+		crc = crcs_in_flash.crc_section_ccm_data;
+		break;
+	default:
+		crc = 0xFFFFFFFFul;
+		break;
+	}
+
+	return crc;
+}

stm-firmware/safety/safety-controller.c

@@ -43,6 +43,7 @@
 #include <stm-periph/rcc-manager.h>
 #include <reflow-controller/temp-converter.h>
 #include <reflow-controller/adc-meas.h>
+#include <reflow-controller/safety/flash-crc.h>
 #include <reflow-controller/periph-config/safety-adc-hwcfg.h>
 
 /**
@@ -154,15 +155,6 @@ struct overtemp_config {
 	uint32_t crc;
 };
 
-struct flash_crcs {
-	uint32_t start_magic;
-	uint32_t crc_section_text;
-	uint32_t crc_section_data;
-	uint32_t crc_section_ccm_data;
-	uint32_t crc_section_vectors;
-	uint32_t end_magic;
-};
-
 struct crc_monitor_register {
 	const volatile void *reg_addr;
 	uint32_t mask;
@@ -364,6 +356,10 @@ static void set_overtemp_config(float over_temperature)
 	safety_controller_overtemp_config.crc = crc_unit_get_crc();
 }
 
+/**
+ * @brief Check the overtemperature config structure's CRC
+ * @return true if check failed. false if CRC check successful
+ */
 static bool over_temperature_config_check(void)
 {
 	if (safety_controller_overtemp_config.crc_dummy_seed != 0xA4F5C7E6UL)
@@ -910,7 +906,7 @@ void safety_controller_init(void)
 	/* This is usually done by the safety memory already. But, since this module also uses the CRC... */
 	crc_unit_init();
 
-	safety_controller_trigger_flash_crc_check();
+	flash_crc_trigger_check();
 	stack_check_init_corruption_detect_area();
 
 	hw_rev = get_pcb_hardware_version();
@@ -1113,12 +1109,15 @@ static void safety_controller_do_systick_checking(void)
  * is set, the appropriate action defined by the flag weight is executed.
  * @note If no flag weigth is present for a given error flag, it is treated as the most critical category
  * (@ref SAFETY_FLAG_CONFIG_WEIGHT_PANIC)
+ *
+ * @returns Worst config weight set
  */
-static void safety_controller_handle_weighted_flags(void)
+static enum config_weight safety_controller_handle_weighted_flags(void)
 {
 	uint32_t flag_index;
 	volatile struct error_flag *current_flag;
 	enum config_weight flag_weigth;
+	enum config_weight worst = SAFETY_FLAG_CONFIG_WEIGHT_NONE;
 
 	for (flag_index = 0u; flag_index < COUNT_OF(flags); flag_index++) {
 		current_flag = &flags[flag_index];
@@ -1128,6 +1127,11 @@ static void safety_controller_handle_weighted_flags(void)
 			continue;
 
 		flag_weigth = get_flag_weight(current_flag);
+
+		/* Override the worst flag weigt set, if it is worse than the previous ones */
+		if (flag_weigth > worst)
+			worst = flag_weigth;
+
 		switch (flag_weigth) {
 		case SAFETY_FLAG_CONFIG_WEIGHT_NONE:
 			break;
@@ -1143,6 +1147,8 @@ static void safety_controller_handle_weighted_flags(void)
 		}
 
 	}
+
+	return worst;
 }
 
 #ifndef DEBUGBUILD
@@ -1152,9 +1158,9 @@ static void external_watchdog_toggle(void)
 }
 #endif
 
-int safety_controller_handle(void)
+enum config_weight safety_controller_handle(void)
 {
-	int ret = 0;
+	enum config_weight worst_weight_set;
 #ifndef DEBUGBUILD
 	static uint32_t watchdog_counter = 0UL;
 #endif
@@ -1164,9 +1170,10 @@ int safety_controller_handle(void)
 	safety_controller_handle_memory_checks();
 	safety_controller_do_systick_checking();
 	safety_controller_process_monitor_checks();
-	safety_controller_handle_weighted_flags();
+	worst_weight_set = safety_controller_handle_weighted_flags();
 
-	ret |= watchdog_ack(WATCHDOG_MAGIC_KEY);
+	/* Ignore error here. Will trigger restart anyway */
+	(void)watchdog_ack(WATCHDOG_MAGIC_KEY);
 
 #ifndef DEBUGBUILD
 	if (get_pcb_hardware_version() != HW_REV_V1_2) {
@@ -1177,7 +1184,8 @@ int safety_controller_handle(void)
 		}
 	}
 #endif
-	return (ret ? -1 : 0);
+
+	return worst_weight_set;
 }
 
 int safety_controller_enable_timing_mon(enum timing_monitor monitor, bool enable)
@@ -1438,94 +1446,6 @@ float safety_controller_get_overtemp_limit(void)
 	return safety_controller_overtemp_config.overtemp_deg_celsius;
 }
 
-extern const uint32_t __ld_vectors_start;
-extern const uint32_t __ld_vectors_end;
-extern const uint32_t __ld_text_start;
-extern const uint32_t __ld_text_end;
-
-extern const uint32_t __ld_sdata_ccm;
-extern const uint32_t __ld_edata_ccm;
-extern const uint32_t __ld_load_ccm_data;
-
-extern const uint32_t __ld_sdata;
-extern const uint32_t __ld_edata;
-extern const uint32_t __ld_load_data;
-
-int safety_controller_trigger_flash_crc_check(void)
-{
-	/* This structs needs to be volatile!!
-	 * This prevents the compiler form optimizing out the reads to the crcs which will be patched in later by
-	 * a separate python script!
-	 */
-	static volatile const struct flash_crcs IN_SECTION(.flashcrc) crcs_in_flash = {
-		.start_magic = 0xA8BE53F9UL,
-		.crc_section_ccm_data = 0UL,
-		.crc_section_text = 0UL,
-		.crc_section_data = 0UL,
-		.crc_section_vectors = 0UL,
-		.end_magic = 0xFFA582FFUL,
-	};
-
-	int ret = -1;
-	uint32_t len;
-	uint32_t crc;
-
-	/* Perform CRC check over vector table */
-	len = (uint32_t)((void *)&__ld_vectors_end - (void *)&__ld_vectors_start);
-	if (len % 4) {
-		safety_controller_report_error(ERR_FLAG_FLASH_CRC_CODE);
-	} else {
-		len /= 4;
-		crc_unit_reset();
-		crc_unit_input_array(&__ld_vectors_start, len);
-		crc = crc_unit_get_crc();
-		if (crc != crcs_in_flash.crc_section_vectors)
-			safety_controller_report_error(ERR_FLAG_FLASH_CRC_CODE);
-	}
-
-	/* Perform CRC check over text section */
-	len = (uint32_t)((void *)&__ld_text_end - (void *)&__ld_text_start);
-	if (len % 4) {
-		safety_controller_report_error(ERR_FLAG_FLASH_CRC_CODE);
-	} else {
-		len /= 4;
-		crc_unit_reset();
-		crc_unit_input_array(&__ld_text_start, len);
-		crc = crc_unit_get_crc();
-		if (crc != crcs_in_flash.crc_section_text)
-			safety_controller_report_error(ERR_FLAG_FLASH_CRC_CODE);
-	}
-
-	/* Perform CRC check over data section */
-	len = (uint32_t)((void *)&__ld_edata - (void *)&__ld_sdata);
-	if (len % 4) {
-		safety_controller_report_error(ERR_FLAG_FLASH_CRC_DATA);
-	} else {
-		len /= 4;
-		crc_unit_reset();
-		crc_unit_input_array(&__ld_load_data, len);
-		crc = crc_unit_get_crc();
-		if (crc != crcs_in_flash.crc_section_data)
-			safety_controller_report_error(ERR_FLAG_FLASH_CRC_DATA);
-	}
-
-	/* Perform CRC check over ccm data section */
-	len = (uint32_t)((void *)&__ld_edata_ccm - (void *)&__ld_sdata_ccm);
-	if (len % 4) {
-		safety_controller_report_error(ERR_FLAG_FLASH_CRC_DATA);
-	} else {
-		len /= 4;
-		crc_unit_reset();
-		crc_unit_input_array(&__ld_load_ccm_data, len);
-		crc = crc_unit_get_crc();
-		if (crc != crcs_in_flash.crc_section_ccm_data)
-			safety_controller_report_error(ERR_FLAG_FLASH_CRC_DATA);
-	}
-
-	ret = 0;
-	return ret;
-}
-
 int safety_controller_set_crc_monitor(enum crc_monitor mon, uint32_t password)
 {
 	uint32_t i;

stm-firmware/sd.c

@@ -0,0 +1,65 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2022  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * GDSII-Converter is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <reflow-controller/sd.h>
+#include "fatfs/ff.h"
+#include "fatfs/shimatta_sdio_driver/shimatta_sdio.h"
+#include <stdint.h>
+#include <string.h>
+#include <helper-macros/helper-macros.h>
+#include <reflow-controller/digio.h>
+
+static bool sd_card_mounted_state = false;
+
+bool mount_sd_card_if_avail(FATFS *fs)
+{
+	FRESULT res;
+	static uint8_t IN_SECTION(.ccm.bss) inserted_counter = 0;
+
+	if (sdio_check_inserted() && sd_card_mounted_state) {
+		memset(fs, 0, sizeof(FATFS));
+		sdio_stop_clk();
+		inserted_counter = 0;
+		sd_card_mounted_state = false;
+		goto ret;
+	}
+
+	if (!sdio_check_inserted() && inserted_counter < 255)
+		inserted_counter++;
+
+	if (!sdio_check_inserted() && !sd_card_mounted_state && inserted_counter > 4) {
+		inserted_counter = 0;
+		res = f_mount(fs, "0:/", 1);
+		if (res == FR_OK) {
+			led_set(1, 1);
+			sd_card_mounted_state = true;
+		} else {
+			sd_card_mounted_state = false;
+		}
+	}
+
+ret:
+	return sd_card_mounted_state;
+}
+
+bool sd_card_is_mounted(void)
+{
+	return sd_card_mounted_state;
+}

stm-firmware/ui/gui.c

@@ -22,6 +22,7 @@
 #include <reflow-controller/ui/gui-config.h>
 #include <reflow-controller/ui/menu.h>
 #include <reflow-controller/ui/lcd.h>
+#include <reflow-controller/sd.h>
 #include <reflow-controller/ui/rotary-encoder.h>
 #include <reflow-controller/systick.h>
 #include <reflow-controller/adc-meas.h>
@@ -789,7 +790,6 @@ static void gui_menu_root_entry(struct lcd_menu *menu, enum menu_entry_func_entr
 	if (entry_type != MENU_ENTRY_CONTINUE) {
 		menu_changed = true;
 		menu_display_clear(menu);
-		update_display_buffer(0, "Main Menu");
 		menu_ack_rotary_delta(menu);
 		if (entry_type == MENU_ENTRY_FIRST_ENTER) {
 			list.entry_names = root_entry_names;
@@ -800,6 +800,8 @@ static void gui_menu_root_entry(struct lcd_menu *menu, enum menu_entry_func_entr
 		}
 	}
 
+	update_display_buffer(0, sd_card_is_mounted() ? "Main Menu [SD]" : "Main Menu [--]");
+
 	push_button = menu_get_button_state(menu);
 	rot_delta = menu_get_rotary_delta(menu);
 

stm-firmware/ui/shell.c

@@ -48,6 +48,7 @@
 #include <stm-periph/option-bytes.h>
 #include <reflow-controller/ui/gui.h>
 #include <reflow-controller/ui/shell-uart.h>
+#include <reflow-controller/safety/flash-crc.h>
 
 #include <stdio.h>
 
@@ -1020,6 +1021,53 @@ shellmatta_retCode_t shell_cmd_set_baud(const shellmatta_handle_t handle, const
 	return SHELLMATTA_OK;
 }
 
+static void shell_print_crc_line(const shellmatta_handle_t handle, const char *name,
+				 uint32_t crc, uint32_t crc_expected)
+{
+	shellmatta_printf(handle, "%-15s0x%08x    0x%08x  [%s]\r\n",
+			  name,
+			  crc,
+			  crc_expected,
+			  crc != crc_expected ? "\e[1;31mERR\e[m" : "\e[32mOK\e[m");
+}
+
+shellmatta_retCode_t shell_cmd_flash_crc(const shellmatta_handle_t handle, const char *args, uint32_t len)
+{
+	(void)args;
+	(void)len;
+	uint32_t crc = 0;
+	uint32_t crc_expected = 0;
+	int res;
+
+	shellmatta_printf(handle, "               Calculated    Expected    State\r\n\r\n");
+
+	res = flash_crc_calc_section(FLASH_CRC_VECTOR, &crc);
+	crc_expected = flash_crc_get_expected_crc(FLASH_CRC_VECTOR);
+	if (res)
+		shellmatta_printf(handle, "Error during calculation!\r\n");
+	shell_print_crc_line(handle, "Vector CRC:", crc, crc_expected);
+
+	res = flash_crc_calc_section(FLASH_CRC_TEXT, &crc);
+	crc_expected = flash_crc_get_expected_crc(FLASH_CRC_TEXT);
+	if (res)
+		shellmatta_printf(handle, "Error during calculation!\r\n");
+	shell_print_crc_line(handle, "Code CRC:", crc, crc_expected);
+
+	res = flash_crc_calc_section(FLASH_CRC_DATA, &crc);
+	crc_expected = flash_crc_get_expected_crc(FLASH_CRC_DATA);
+	if (res)
+		shellmatta_printf(handle, "Error during calculation!\r\n");
+	shell_print_crc_line(handle, "Data CRC:", crc, crc_expected);
+
+	res = flash_crc_calc_section(FLASH_CRC_CCMDATA, &crc);
+	crc_expected = flash_crc_get_expected_crc(FLASH_CRC_CCMDATA);
+	if (res)
+		shellmatta_printf(handle, "Error during calculation!\r\n");
+	shell_print_crc_line(handle, "CCM Data CRC:", crc, crc_expected);
+
+	return SHELLMATTA_OK;
+}
+
 //typedef struct shellmatta_cmd
 //{
 //    char                    *cmd;       /**< command name                           */
@@ -1029,7 +1077,7 @@ shellmatta_retCode_t shell_cmd_set_baud(const shellmatta_handle_t handle, const
 //    shellmatta_cmdFct_t     cmdFct;     /**< pointer to the cmd callack function    */
 //    struct shellmatta_cmd   *next;      /**< pointer to next command or NULL        */
 //} shellmatta_cmd_t;
-static shellmatta_cmd_t cmd[25] = {
+static shellmatta_cmd_t cmd[26] = {
 	{
 		.cmd = "version",
 		.cmdAlias = "ver",
@@ -1229,6 +1277,14 @@ static shellmatta_cmd_t cmd[25] = {
 		.helpText = "Set a new temporary baudrate for the UART",
 		.usageText = "baudrate <new baud>",
 		.cmdFct = shell_cmd_set_baud,
+		.next = &cmd[25],
+	},
+	{
+		.cmd = "flashcrc",
+		.cmdAlias = "fcrc",
+		.helpText = "Calculate the Flash CRCs",
+		.usageText = "flashcrc",
+		.cmdFct = shell_cmd_flash_crc,
 		.next = NULL,
 	},