Start doxygen documentation

stm-firmware/Makefile

@@ -10,12 +10,12 @@ INCLUDEPATH = -Icmsis -Iinclude
 OBJDIR = obj
 target	= reflow-controller
 LIBRARYPATH = -L. -Lmathlib
-LIBRARIES = -larm_cortexM4lf_math
+LIBRARIES = -larm_cortexM4lf_math -lm
 
 DEFINES = -DSTM32F407xx -DSTM32F4XX -DARM_MATH_CM4 -DHSE_VALUE=8000000UL
 mapfile = memory-mapping
 
-GIT_VER := $(shell git describe --always --dirty --tags)
+export GIT_VER = $(shell git describe --always --dirty --tags)
 DEFINES += -DGIT_VER=$(GIT_VER)
 
 ifneq ($(VERBOSE),true)
@@ -41,6 +41,12 @@ CFILES += digio.c
 
 CFILES += stm-periph/unique-id.c
 
+CFILES += calibration.c
+
+CFILES += temp-converter.c
+
+CFILES += rotary-encoder.c
+
 DEFINES += -DDEBUGBUILD
 #TODO
 
@@ -56,7 +62,7 @@ LFLAGS += -Tstm32f407vet6_flash.ld -Wl,-Map=$(mapfile).map
 
 CFLAGS = -c -fmessage-length=0 -mlittle-endian -mthumb -mcpu=cortex-m4 -mthumb-interwork
 CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 -nostartfiles -O0 -g
-CFLAGS += -Wall -Wextra -Wold-style-declaration -Wuninitialized -Wmaybe-uninitialized -Wunused-parameter
+CFLAGS += -Wall -Wextra -Wold-style-declaration -Wuninitialized -Wmaybe-uninitialized -Wunused-parameter -Wimplicit-fallthrough=3 -Wsign-compare
 ####################################################################################
 
 OBJ = $(CFILES:%.c=$(OBJDIR)/%.c.o)
@@ -75,6 +81,7 @@ $(target).elf: $(OBJ) $(ASOBJ)
 	@echo [LD] $@
 	$(QUIET)$(CC) $(LFLAGS) $(LIBRARYPATH) -o $@ $^ $(LIBRARIES)
 	$(QUIET)$(SIZE) $@
+	@echo "Built Version $(GIT_VER)"
 
 #Compiling
 $(OBJ):

stm-firmware/adc-meas.c

@@ -1,3 +1,23 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * GDSII-Converter is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
 #include <reflow-controller/adc-meas.h>
 #include <stm32/stm32f4xx.h>
 #include <cmsis/core_cm4.h>
@@ -11,13 +31,16 @@ static bool calibration_active;
 static float filter_alpha;
 static volatile float pt1000_res_raw_lf;
 static volatile bool filter_ready;
-static volatile enum adc_pt1000_error pt1000_error;
+static volatile enum adc_pt1000_error pt1000_error = ADC_PT1000_INACTIVE;
-static volatile uint8_t * volatile streaming_flag_ptr = NULL;
+static volatile int * volatile streaming_flag_ptr = NULL;
 static uint32_t filter_startup_cnt;
 static volatile float adc_pt1000_raw_reading_hf;
-static volatile bool pt1000_measurement_active = false;
 static volatile uint16_t dma_sample_buffer[ADC_PT1000_DMA_AVG_SAMPLES];
 
+volatile float * volatile stream_buffer = NULL;
+volatile uint32_t stream_count;
+volatile uint32_t stream_pos;
+
 #define ADC_TO_RES(adc) ((float)(adc) / 4096.0f * 2500.0f)
 
 static inline void adc_pt1000_stop_sample_frequency_timer()
@@ -49,7 +72,7 @@ static inline void adc_pt1000_disable_adc()
 	ADC1->CR2 &= ~ADC_CR2_ADON;
 	DMA2_Stream0->CR = 0;
 
-	pt1000_measurement_active = false;
+	pt1000_error |= ADC_PT1000_INACTIVE;
 
 	rcc_manager_disable_clock(&RCC->APB2ENR, BITMASK_TO_BITNO(RCC_APB2ENR_ADC1EN));
 	rcc_manager_disable_clock(&RCC->AHB1ENR, BITMASK_TO_BITNO(ADC_PT1000_PORT_RCC_MASK));
@@ -88,7 +111,7 @@ static inline void adc_pt1000_enable_dma_stream()
 	 * Todo: Maybe use twice as big of a buffer and also use half-fill interrupt in order to prevent overruns
 	 */
 	DMA2_Stream0->CR = DMA_SxCR_PL_1 | DMA_SxCR_MSIZE_0 | DMA_SxCR_PSIZE_0 | DMA_SxCR_MINC |
-			DMA_SxCR_CIRC | DMA_SxCR_TCIE | DMA_SxCR_EN;
+			DMA_SxCR_CIRC | DMA_SxCR_TCIE | DMA_SxCR_TEIE | DMA_SxCR_EN;
 }
 
 static inline void adc_pt1000_disable_dma_stream()
@@ -142,7 +165,7 @@ void adc_pt1000_setup_meas()
 
 	adc_pt1000_setup_sample_frequency_timer();
 
-	pt1000_measurement_active = true;
+	pt1000_error &= ~ADC_PT1000_INACTIVE;
 }
 
 void adc_pt1000_set_moving_average_filter_param(float alpha)
@@ -201,17 +224,40 @@ return_value:
 	return ret_val;
 }
 
-/*
+int adc_pt1000_stream_raw_value_to_memory(volatile float *adc_array, uint32_t length, volatile int *flag_to_set)
-int adc_pt1000_stream_raw_value_to_memory(float *adc_array, uint32_t length, volatile uint8_t *flag_to_set)
 {
-	return -1;
+	int ret = 0;
+
+	if (!flag_to_set)
+		return -1;
+
+	stream_buffer = adc_array;
+	stream_count = length;
+	stream_pos = 0U;
+
+	if (adc_array) {
+		*flag_to_set = 0;
+		streaming_flag_ptr = flag_to_set;
+	} else {
+		ret = -2;
+	}
+
+	return ret;
 }
 
 void adc_pt1000_convert_raw_value_array_to_resistance(float *resistance_dest, float *raw_source, uint32_t count)
 {
+	uint32_t i;
 
+	if (!resistance_dest)
+		resistance_dest = raw_source;
+
+	if (!raw_source || !count)
+		return;
+
+	for (i = 0; i < count; i++)
+		resistance_dest[i] = ADC_TO_RES(raw_source[i]);
 }
-*/
 
 enum adc_pt1000_error adc_pt1000_check_error()
 {
@@ -220,7 +266,7 @@ enum adc_pt1000_error adc_pt1000_check_error()
 
 void adc_pt1000_clear_error()
 {
-	pt1000_error = ADC_PT1000_NO_ERR;
+	pt1000_error &= ~ADC_PT1000_OVERFLOW & ~ADC_PT1000_WATCHDOG_ERROR;
 }
 
 void adc_pt1000_disable()
@@ -231,6 +277,7 @@ void adc_pt1000_disable()
 
 	filter_ready = false;
 	pt1000_res_raw_lf = 0.0f;
+	pt1000_error |= ADC_PT1000_INACTIVE;
 
 	if (streaming_flag_ptr) {
 		*streaming_flag_ptr = -3;
@@ -283,10 +330,6 @@ void ADC_IRQHandler(void)
 		pt1000_error |= ADC_PT1000_OVERFLOW;
 		/* Disable ADC  in case of overrrun*/
 		adc_pt1000_disable();
-		if (streaming_flag_ptr) {
-			*streaming_flag_ptr = -1;
-			streaming_flag_ptr = NULL;
-		}
 	}
 
 	if (adc1_sr & ADC_SR_AWD) {
@@ -295,6 +338,21 @@ void ADC_IRQHandler(void)
 	}
 }
 
+static void append_stream_buffer(float val)
+{
+	if (!stream_buffer || !streaming_flag_ptr)
+		return;
+
+	if (stream_pos < stream_count)
+		stream_buffer[stream_pos++] = val;
+
+	if (stream_pos >= stream_count) {
+		*streaming_flag_ptr = 1;
+		streaming_flag_ptr = NULL;
+	}
+
+}
+
 void DMA2_Stream0_IRQHandler()
 {
 	uint32_t lisr;
@@ -308,13 +366,15 @@ void DMA2_Stream0_IRQHandler()
 		adc_val = adc_pt1000_dma_avg_pre_filter();
 		adc_pt1000_raw_reading_hf = adc_val;
 
+		if (streaming_flag_ptr)
+			append_stream_buffer(adc_val);
+
 		/* Call moving average filter */
 		adc_pt1000_filter(adc_val);
 	}
 
 	if (lisr & DMA_LISR_TEIF0) {
-		/* Wait for watchdog to kick in */
+		adc_pt1000_disable();
-		while(1);
 	}
 
 }

stm-firmware/calibration.c

@@ -0,0 +1,171 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * GDSII-Converter is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#include <reflow-controller/calibration.h>
+#include <reflow-controller/adc-meas.h>
+#include <stm-periph/uart.h>
+#include <helper-macros/helper-macros.h>
+#include <arm_math.h>
+#include <stdlib.h>
+#include <float.h>
+
+void calibration_calculate(float low_measured, float low_setpoint, float high_measured, float high_setpoint,
+			   float *sens_deviation, float *sens_corrected_offset)
+{
+	if (!sens_deviation || !sens_corrected_offset)
+		return;
+
+	float delta_y;
+	float delta_x;
+	float sens_corr_mult;
+
+	delta_y = high_measured - low_measured;
+	delta_x = high_setpoint - low_setpoint;
+
+	sens_corr_mult = delta_x / delta_y;
+	*sens_deviation = sens_corr_mult - 1.0f;
+
+	*sens_corrected_offset = low_setpoint - low_measured * sens_corr_mult;
+}
+
+
+
+int calibration_acquire_data(float *mu, float *max_dev, uint32_t count)
+{
+	int status;
+	float *stream_mem;
+	float min_val = FLT_MAX;
+	float max_val = -FLT_MAX;
+	uint32_t i;
+	int ret_val = 0;
+
+	static volatile int flag = 0;
+
+	if (!mu || !max_dev || !count)
+		return -1000;
+
+	stream_mem = (float *)calloc(count, sizeof(float));
+	if (!stream_mem)
+		return -2;
+
+	status = adc_pt1000_stream_raw_value_to_memory(stream_mem, count, &flag);
+	if (status)
+		return status;
+
+	/* Wait for data to be transferred */
+	while (flag == 0);
+
+	if (flag != 1) {
+		/* Error */
+		ret_val = -1;
+		goto ret_free_mem;
+	}
+
+	/* Convert the stream memory to Ohm readings */
+	adc_pt1000_convert_raw_value_array_to_resistance(NULL, stream_mem, count);
+
+	/* Do not compute std-deviation. Too imprecise
+	 * arm_std_f32(stream_mem, count, sigma);
+	 */
+	arm_mean_f32(stream_mem, count, mu);
+
+	/* Find min and max values of array */
+	for (i = 0U; i < count; i++) {
+		min_val = MIN(min_val, stream_mem[i]);
+		max_val = MAX(max_val, stream_mem[i]);
+	}
+
+	/* Compute maximum deviation range */
+	*max_dev = max_val - min_val;
+
+ret_free_mem:
+	free(stream_mem);
+	return ret_val;
+}
+
+static void wait_for_uart_enter()
+{
+	int enter_received = 0;
+	const char *recv_data;
+	size_t recv_len;
+	size_t iter;
+	int uart_recv_status;
+
+	do {
+		uart_recv_status = uart_receive_data_with_dma(&recv_data, &recv_len);
+		if (uart_recv_status >= 1) {
+			for (iter = 0; iter < recv_len; iter++) {
+				if (recv_data[iter] == '\n' || recv_data[iter] == '\r')
+					enter_received = 1;
+			}
+		}
+	} while (enter_received == 0);
+}
+
+int calibration_sequence_shell_cmd(shellmatta_handle_t shell)
+{
+	float mu, mu2, dev, dev2;
+	float sens_dev, offset;
+
+	/* Clear errors of PT1000 reading */
+	adc_pt1000_clear_error();
+
+	shellmatta_printf(shell, "Starting calibration: Insert 1000 Ohm calibration resistor and press ENTER\r\n");
+	wait_for_uart_enter();
+	shellmatta_printf(shell, "Measurement...\r\n");
+
+	/* Clear errors of PT1000 reading */
+	adc_pt1000_clear_error();
+	calibration_acquire_data(&mu, &dev, 512UL);
+	shellmatta_printf(shell, "R=%.2f, Noise peak-peak: %.2f\r\n", mu, dev);
+	if (adc_pt1000_check_error() != ADC_PT1000_NO_ERR) {
+		shellmatta_printf(shell, "Error in resistance measurement: %d", adc_pt1000_check_error());
+		return -1;
+	}
+
+	/* Measure 2nd calibration point */
+	shellmatta_printf(shell, "Insert 2000 Ohm calibration resistor and press ENTER\r\n");
+	wait_for_uart_enter();
+	shellmatta_printf(shell, "Measurement...\r\n");
+
+	/* Clear errors of PT1000 reading */
+	adc_pt1000_clear_error();
+	calibration_acquire_data(&mu2, &dev2, 512UL);
+	shellmatta_printf(shell, "R=%.2f, Noise peak-peak: %.2f\r\n", mu2, dev2);
+	if (adc_pt1000_check_error() != ADC_PT1000_NO_ERR) {
+		shellmatta_printf(shell, "Error in resistance measurement: %d", adc_pt1000_check_error());
+		return -2;
+	}
+
+	/* Check noise values */
+	if (dev > CALIBRATION_MAX_PEAK_PEAK_NOISE_OHM || dev2 > CALIBRATION_MAX_PEAK_PEAK_NOISE_OHM) {
+		shellmatta_printf(shell, "Calibration failed! Too much noise. Check you're hardware.\r\n");
+		return -3;
+	}
+
+	/* Calculate calibration */
+	calibration_calculate(mu, 1000.0f, mu2, 2000.0f, &sens_dev, &offset);
+
+	shellmatta_printf(shell, "Calibration done:\r\n\tSENS_DEVIATION: %.4f\r\n\tOFFSET_CORR: %.2f\r\n", sens_dev, offset);
+	adc_pt1000_set_resistance_calibration(offset, sens_dev, true);
+
+	return 0;
+}

stm-firmware/create-c-file-with-header.py

@@ -0,0 +1,61 @@
+#!/usr/bin/env python3
+
+import os
+import sys
+
+license_header = """/* Reflow Oven Controller
+*
+* Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+*
+* This file is part of the Reflow Oven Controller Project.
+*
+* The reflow oven controller is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+* GDSII-Converter is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with the reflow oven controller project.
+* If not, see <http://www.gnu.org/licenses/>.
+*/
+
+"""
+
+project_dir = os.path.dirname(os.path.realpath(__file__))
+include_prefix = 'reflow-controller'
+module_include_dir = os.path.join(project_dir, os.path.join('include', include_prefix))
+
+if len(sys.argv) < 2:
+	print('Supply module name')
+	sys.exit()
+
+cpath = os.path.join(project_dir, sys.argv[1]+'.c')
+hfile = sys.argv[1]+'.h'
+hpath = os.path.join(module_include_dir, hfile)
+
+h_define = '__'+hfile.replace('.', '_').replace('-', '_').upper()+'__'
+
+if os.path.exists(cpath) or os.path.exists(hpath):
+	print("File already exists! Abort!")
+	sys.exit()
+
+print('Creating C file: %s' % (cpath))
+with open(cpath, 'x') as f:
+	f.write(license_header)
+	f.write('\n')
+	f.write('#include <%s>' % (os.path.join(include_prefix, hfile)))
+
+print('Creating H file: %s' % (hpath))
+with open(hpath, 'x') as f:
+	f.write(license_header)
+	f.write('\n')
+	f.write('#ifndef %s\n' % h_define)
+	f.write('#define %s\n' % h_define)
+	f.write('\n')
+	f.write('#endif /* %s */\n' % h_define)
+	
+

stm-firmware/create-temp-lookup-table.py

@@ -0,0 +1,74 @@
+#!/usr/bin/env python3
+
+import os
+import sys
+import numpy as np
+
+license_header = """/* Reflow Oven Controller
+*
+* Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+*
+* This file is part of the Reflow Oven Controller Project.
+*
+* The reflow oven controller is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+* GDSII-Converter is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with the reflow oven controller project.
+* If not, see <http://www.gnu.org/licenses/>.
+*/
+
+"""
+
+hfile="temp-converter-data.h"
+
+project_dir = os.path.dirname(os.path.realpath(__file__))
+include_prefix = 'reflow-controller'
+module_include_dir = os.path.join(project_dir, os.path.join('include', include_prefix))
+include_file = os.path.join(module_include_dir, hfile)
+
+h_define = '__'+hfile.replace('.', '_').replace('-', '_').upper()+'__'
+
+min_res = 1000
+max_res = 2200
+res_step = 20
+
+R_zero = 1000.0
+A = 3.9083E-3
+B = -5.7750E-7
+
+def calc_temp(resistance):
+    temp = (-R_zero * A + np.sqrt(R_zero*R_zero * A * A - 4* R_zero * B * (R_zero - resistance)))/(2*R_zero*B)
+    return temp
+
+if ((max_res-min_res) % res_step) != 0:
+	print('Resistance range must be a multiple of res_step!')
+	sys.exit(-1)
+
+print('Calculating temperature table for %f Ohm to %f Ohm in %f Ohm steps' % (min_res, max_res, res_step))
+
+temp_array = ''
+
+for res in range(min_res, max_res+res_step, res_step):
+	temp = calc_temp(res)
+	temp_array = temp_array+ ',%.2ff' % temp
+
+temp_array = temp_array[1:]
+
+with open(include_file, 'x') as f:
+	f.write(license_header)
+	f.write('\n')
+	f.write('#ifndef %s\n' % h_define)
+	f.write('#define %s\n\n' % h_define)
+	f.write('#define TEMP_CONVERSION_ARRAY_DATA %s\n' % temp_array)
+	f.write('#define TEMP_CONVERSION_MIN_RES %d\n' % min_res)
+	f.write('#define TEMP_CONVERSION_MAX_RES %d\n' % max_res)
+	f.write('#define TEMP_CONVERSION_RES_STEP %d\n' % res_step)
+	f.write('\n')
+	f.write('#endif /* %s */\n' % h_define)

stm-firmware/digio.c

@@ -1,3 +1,23 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * GDSII-Converter is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
 #include <reflow-controller/digio.h>
 #include <stm32/stm32f4xx.h>
 #include <stm-periph/clock-enable-manager.h>

stm-firmware/doxygen/build-doxygen.sh

@@ -0,0 +1,20 @@
+#!/bin/bash
+
+SOURCE="${BASH_SOURCE[0]}"
+while [ -h "$SOURCE" ]; do # resolve $SOURCE until the file is no longer a symlink
+  DIR="$( cd -P "$( dirname "$SOURCE" )" >/dev/null && pwd )"
+  SOURCE="$(readlink "$SOURCE")"
+  [[ $SOURCE != /* ]] && SOURCE="$DIR/$SOURCE" # if $SOURCE was a relative symlink, we need to resolve it relative to the path where the symlink file was located
+done
+DIR="$( cd -P "$( dirname "$SOURCE" )" >/dev/null && pwd )"
+cd "$DIR"
+
+export PROJECT_NUMBER=`git describe --always --tags --dirty`
+
+if [ $# != 1 ]; then
+	export OUTPUT_DIRECTORY="./output"
+else
+	export OUTPUT_DIRECTORY="$1"
+fi
+
+doxygen Doxyconfig

stm-firmware/doxygen/output/.gitignore

@@ -0,0 +1,3 @@
+*
+*/
+!.gitignore

stm-firmware/include/arm_math.h

@@ -267,7 +267,7 @@
 #define __CMSIS_GENERIC         /* disable NVIC and Systick functions */
 
 #if defined (ARM_MATH_CM4)
-#include "core_cm4.h"
+#include <cmsis/core_cm4.h>
 #elif defined (ARM_MATH_CM3)
 #include "core_cm3.h"
 #elif defined (ARM_MATH_CM0)
@@ -282,8 +282,8 @@
 #endif
 
 #undef  __CMSIS_GENERIC         /* enable NVIC and Systick functions */
-#include "string.h"
+#include <string.h>
-#include "math.h"
+#include <math.h>
 #ifdef	__cplusplus
 extern "C"
 {

stm-firmware/include/helper-macros/helper-macros.h

@@ -1,3 +1,23 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * GDSII-Converter is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
 #ifndef __HELPER_MACROS_H__
 #define __HELPER_MACROS_H__
 
@@ -11,4 +31,7 @@
 
 #define COUNT_OF(x) ((sizeof(x)/sizeof(0[x])) / ((size_t)(!(sizeof(x) % sizeof(0[x])))))
 
+#define MIN(a,b) (((a) < (b)) ? (a) : (b))
+#define MAX(a,b) (((a) > (b)) ? (a) : (b))
+
 #endif /* __HELPER_MACROS_H__ */

stm-firmware/include/reflow-controller/adc-meas.h

@@ -1,3 +1,23 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * GDSII-Converter is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
 #ifndef __ADCMEAS_H__
 #define __ADCMEAS_H__
 
@@ -39,7 +59,7 @@
  */
 #define ADC_PT1000_UPPER_WATCHDOG 4000U
 
-enum adc_pt1000_error {ADC_PT1000_NO_ERR= 0, ADC_PT1000_WATCHDOG_ERROR=(1UL<<0), ADC_PT1000_OVERFLOW=(1UL<<1)};
+enum adc_pt1000_error {ADC_PT1000_NO_ERR= 0, ADC_PT1000_WATCHDOG_ERROR=(1UL<<0), ADC_PT1000_OVERFLOW=(1UL<<1), ADC_PT1000_INACTIVE = (1UL<<2)};
 
 /**
  * @brief This function sets up the ADC measurement fo the external PT1000 temperature sensor
@@ -102,16 +122,12 @@ int adc_pt1000_get_current_resistance(float *resistance);
 
 /**
  * @brief Stream the raw ADC data to an array in memory.
- *
- * Streaming is done using DMA2 Stream0.
- * This function is used for gathering fullspeed sampling data for external interfaces or calibration
- *
  * @param adc_array Array to stream data to
  * @param length Amount of data points to be measured
  * @param flag_to_set This flag is set to 1 once the data has been measured and is transferred. A negative value indicates an error
  * @return 0 if measurement could be started
  */
-int adc_pt1000_stream_raw_value_to_memory(float *adc_array, uint32_t length, volatile uint8_t *flag_to_set);
+int adc_pt1000_stream_raw_value_to_memory(volatile float *adc_array, uint32_t length, volatile int *flag_to_set);
 
 void adc_pt1000_convert_raw_value_array_to_resistance(float *resistance_dest, float *raw_source, uint32_t count);
 

stm-firmware/include/reflow-controller/calibration.h

@@ -0,0 +1,36 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * GDSII-Converter is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __CALIBRATION_H__
+#define __CALIBRATION_H__
+
+#define CALIBRATION_MAX_PEAK_PEAK_NOISE_OHM 8.0f
+
+#include <stdint.h>
+#include <shellmatta.h>
+
+void calibration_calculate(float low_measured, float low_setpoint, float high_measured, float high_setpoint,
+			   float *sens_deviation, float *sens_corrected_offset);
+
+int calibration_acquire_data(float *mu, float *max_dev, uint32_t count);
+
+int calibration_sequence_shell_cmd(shellmatta_handle_t shell);
+
+#endif /* __CALIBRATION_H__ */

stm-firmware/include/reflow-controller/digio.h

@@ -1,3 +1,23 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * GDSII-Converter is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
 #ifndef __DIGIO_H__
 #define __DIGIO_H__
 

stm-firmware/include/reflow-controller/rotary-encoder.h

@@ -0,0 +1,42 @@
+/* Reflow Oven Controller
+*
+* Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+*
+* This file is part of the Reflow Oven Controller Project.
+*
+* The reflow oven controller is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+* GDSII-Converter is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with the reflow oven controller project.
+* If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef __ROTARY_ENCODER_H__
+#define __ROTARY_ENCODER_H__
+
+#include <stm32/stm32f4xx.h>
+
+#define ROTARY_ENCODER_TIMER TIM5
+#define ROTARY_ENCODER_TIMER_RCC_MASK RCC_APB1ENR_TIM5EN
+#define ROTARY_ENCODER_PIN1 0
+#define ROTARY_ENCODER_PIN2 1
+#define ROTARY_ENCODER_PORT GPIOA
+#define ROTARY_ENCODER_PORT_ALTFUNC 2
+#define ROTARY_ENCODER_RCC_MASK RCC_AHB1ENR_GPIOAEN
+
+void rotary_encoder_setup(void);
+
+uint32_t rotary_encoder_get_abs_val(void);
+
+int32_t rotary_encoder_get_chage_val(void);
+
+void rotary_encoder_stop(void);
+
+#endif /* __ROTARY_ENCODER_H__ */

stm-firmware/include/reflow-controller/shell.h

@@ -1,3 +1,23 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * GDSII-Converter is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
 #ifndef __SHELL_H__
 #define __SHELL_H__
 

stm-firmware/include/reflow-controller/systick.h

@@ -1,3 +1,27 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * GDSII-Converter is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/**
+ * @file systick.h
+ */
+
 #ifndef __SYSTICK_H__
 #define __SYSTICK_H__
 

stm-firmware/include/reflow-controller/temp-converter-data.h

@@ -0,0 +1,29 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * GDSII-Converter is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __TEMP_CONVERTER_DATA_H__
+#define __TEMP_CONVERTER_DATA_H__
+
+#define TEMP_CONVERSION_ARRAY_DATA -0.00f,5.12f,10.25f,15.39f,20.53f,25.68f,30.84f,36.01f,41.19f,46.37f,51.57f,56.77f,61.98f,67.19f,72.42f,77.65f,82.89f,88.14f,93.40f,98.67f,103.94f,109.23f,114.52f,119.82f,125.13f,130.45f,135.77f,141.11f,146.45f,151.81f,157.17f,162.54f,167.92f,173.31f,178.71f,184.11f,189.53f,194.96f,200.39f,205.84f,211.29f,216.75f,222.22f,227.71f,233.20f,238.70f,244.21f,249.73f,255.26f,260.80f,266.35f,271.91f,277.48f,283.06f,288.65f,294.25f,299.86f,305.48f,311.11f,316.75f,322.40f
+#define TEMP_CONVERSION_MIN_RES 1000
+#define TEMP_CONVERSION_MAX_RES 2200
+#define TEMP_CONVERSION_RES_STEP 20
+
+#endif /* __TEMP_CONVERTER_DATA_H__ */

stm-firmware/include/reflow-controller/temp-converter.h

@@ -0,0 +1,32 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * GDSII-Converter is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __TEMP_CONVERTER_H__
+#define __TEMP_CONVERTER_H__
+
+/**
+ * @brief Convert PT1000 resistance to temperature in degrees celsius
+ * @param resistance PT1000 resistance value
+ * @param[out] temp_out Temperature output
+ * @return 0 if ok, -1 if value is below conversion range, 1 if value is above conversion range,-1000 in case of pointer error
+ */
+int temp_converter_convert_resistance_to_temp(float resistance, float *temp_out);
+
+#endif /* __TEMP_CONVERTER_H__ */

stm-firmware/include/stm-periph/clock-enable-manager.h

@@ -1,3 +1,23 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * GDSII-Converter is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
 #ifndef __CLOCK_ENABLE_MANAGER_H__
 #define __CLOCK_ENABLE_MANAGER_H__
 

stm-firmware/include/stm-periph/dma-ring-buffer.h

@@ -1,3 +1,32 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * GDSII-Converter is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/**
+ * @file dma-ring-buffer.h
+ * @brief Header for DMA Ring buffer implemenation
+ */
+
+/**
+ * @defgroup dma-ring-buffer DMA Ring Buffers from and to Peripherals
+ */
+
 #ifndef __DMA_RING_BUFFER_H__
 #define __DMA_RING_BUFFER_H__
 
@@ -5,11 +34,16 @@
 #include <stm32/stm32f4xx.h>
 #include <stddef.h>
 
+/**
+ * @addtogroup dma-ring-buffer
+ * @{
+ */
+
 /**
  * @brief DMA ring buffer for data transfer from peripheral to memory
  */
 struct dma_ring_buffer_to_mem {
-	void *data_ptr;			/**< @brief Ring buffer */
+	volatile void *data_ptr;			/**< @brief Ring buffer */
 	size_t buffer_count;		/**< @brief Size of buffer in multiples of elements */
 	DMA_Stream_TypeDef *dma;	/**< @brief DMA Stream used to transfer data */
 	size_t get_idx;			/**< @brief Get index for SW. Indicates the next element to be read */
@@ -21,7 +55,7 @@ struct dma_ring_buffer_to_mem {
  * @brief DMA ring buffer for data transfer from memory to peripheral
  */
 struct dma_ring_buffer_to_periph {
-	void *src_buffer;			/**< @brief Ring buffer */
+	volatile void *src_buffer;			/**< @brief Ring buffer */
 	size_t buffer_count;			/**< @brief Size of buffer in multiples of elements */
 	DMA_Stream_TypeDef *dma;		/**< @brief DMA Stream used to transfer data */
 	volatile size_t dma_get_idx_current;	/**< @brief Current get index of the (not yet) running DMA Stream. */
@@ -44,16 +78,16 @@ struct dma_ring_buffer_to_periph {
  * @note The ring buffers do not have an overrun detection. You have to make sure to empty the buffer in time.
  * @return Status (0 is ok)
  */
-int dma_ring_buffer_periph_to_mem_initialize(struct dma_ring_buffer_to_mem *dma_buffer, uint8_t base_dma_id, DMA_Stream_TypeDef *dma_stream, size_t buffer_element_count, size_t element_size, void *data_buffer, void *src_reg, uint8_t dma_trigger_channel);
+int dma_ring_buffer_periph_to_mem_initialize(struct dma_ring_buffer_to_mem *dma_buffer, uint8_t base_dma_id, DMA_Stream_TypeDef *dma_stream, size_t buffer_element_count, size_t element_size, volatile void *data_buffer, void *src_reg, uint8_t dma_trigger_channel);
 
 /**
  * @brief Get data from a peripheral to memory ring buffer
  * @param[in] buff Ring buffer structure
  * @param[out] data_buff Pointer to set to new data. This must not be modified!
  * @param[out] len Length in elements
- * @return 0 if successful (data, no data), -1 if error, and 1 if data with wrap around. Call function again in this case to retrieve rest after wrap around.
+ * @return 0 if successful, but no data), -1 if error, 1 if data, and 2 if data with wrap around. Call function again in this case to retrieve rest after wrap around.
  */
-int dma_ring_buffer_periph_to_mem_get_data(struct dma_ring_buffer_to_mem *buff, const void **data_buff, size_t *len);
+int dma_ring_buffer_periph_to_mem_get_data(struct dma_ring_buffer_to_mem *buff, const volatile void **data_buff, size_t *len);
 
 /**
  * @brief Stop the ring buffer operation.
@@ -74,7 +108,7 @@ void dma_ring_buffer_periph_to_mem_stop(struct dma_ring_buffer_to_mem *buff);
  * @param[in] dest_reg Destination register to stream data to
  * @return 0 if successful
  */
-int dma_ring_buffer_mem_to_periph_initialize(struct dma_ring_buffer_to_periph *dma_buffer, uint8_t base_dma_id, DMA_Stream_TypeDef *dma_stream, size_t buffer_element_count, size_t element_size, void *data_buffer, uint8_t dma_trigger_channel, void *dest_reg);
+int dma_ring_buffer_mem_to_periph_initialize(struct dma_ring_buffer_to_periph *dma_buffer, uint8_t base_dma_id, DMA_Stream_TypeDef *dma_stream, size_t buffer_element_count, size_t element_size, volatile void *data_buffer, uint8_t dma_trigger_channel, void *dest_reg);
 
 /**
  * @brief Insert data into the ring buffer
@@ -104,6 +138,8 @@ void dma_ring_buffer_mem_to_periph_int_callback(struct dma_ring_buffer_to_periph
  */
 void dma_ring_buffer_mem_to_periph_stop(struct dma_ring_buffer_to_periph *buff);
 
+/** @} */
+
 #endif /* __DMA_RING_BUFFER_H__ */
 
 

stm-firmware/include/stm-periph/stm32-gpio-macros.h

@@ -1,3 +1,23 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * GDSII-Converter is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
 #ifndef __STM32GPIOMACROS_H__
 #define __STM32GPIOMACROS_H__
 

stm-firmware/include/stm-periph/uart.h

@@ -1,3 +1,23 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * GDSII-Converter is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
 #include <stdint.h>
 #include <stddef.h>
 

stm-firmware/include/stm-periph/unique-id.h

@@ -1,3 +1,23 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * GDSII-Converter is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
 #ifndef __UNIQUE_ID_H__
 #define __UNIQUE_ID_H__
 

stm-firmware/main.c

@@ -1,3 +1,28 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * GDSII-Converter is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/**
+ * @file main.c
+ * @brief Main file for firmware
+ */
+
 #include <stdlib.h>
 #include <string.h>
 /* #include <arm_math.h> */
@@ -8,6 +33,7 @@
 #include <reflow-controller/adc-meas.h>
 #include <reflow-controller/shell.h>
 #include <reflow-controller/digio.h>
+#include <reflow-controller/rotary-encoder.h>
 #include <stm-periph/stm32-gpio-macros.h>
 #include <stm-periph/clock-enable-manager.h>
 #include <stm-periph/uart.h>
@@ -25,12 +51,15 @@ static void setup_nvic_priorities()
 
 static float pt1000_value;
 static volatile int pt1000_value_status;
+static uint32_t rot;
+
 
 int main()
 {
 	const char *uart_input;
 	size_t uart_input_len;
 	shellmatta_handle_t shell_handle;
+	int uart_receive_status;
 
 	setup_nvic_priorities();
 	systick_setup();
@@ -40,6 +69,7 @@ int main()
 	digio_setup_default_all();
 	led_setup();
 	loudspeaker_setup();
+	rotary_encoder_setup();
 
 	uart_init_with_dma();
 
@@ -47,11 +77,10 @@ int main()
 
 	while(1) {
 		pt1000_value_status = adc_pt1000_get_current_resistance(&pt1000_value);
-
+		rot = rotary_encoder_get_abs_val();
-		if (uart_receive_data_with_dma(&uart_input, &uart_input_len) >= 0) {
+		uart_receive_status = uart_receive_data_with_dma(&uart_input, &uart_input_len);
+		if (uart_receive_status >= 1)
 			shell_handle_input(shell_handle, uart_input, uart_input_len);
-		}
-		//systick_wait_ms(300);
 	}
 
 }

stm-firmware/program-device.gdb

@@ -0,0 +1,8 @@
+target extended-remote :2331
+monitor speed 4000
+monitor reset
+load
+monitor reset
+kill
+quit
+

stm-firmware/program-device.sh

@@ -0,0 +1,18 @@
+#!/bin/bash
+
+JLinkGDBServer -if SWD -device STM32F407VE &
+sleep 2
+
+# Check if GDB server is still running
+gdbpid=`pidof JLinkGDBServer`
+
+if [[ $gdbpid == "" ]]; then
+	echo ""
+	echo "GDB Server not running! Check target connection."
+	exit
+fi
+
+arm-none-eabi-gdb -x program-device.gdb reflow-controller.elf
+sleep 2
+
+kill $gdbpid

stm-firmware/rotary-encoder.c

@@ -0,0 +1,78 @@
+/* Reflow Oven Controller
+*
+* Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+*
+* This file is part of the Reflow Oven Controller Project.
+*
+* The reflow oven controller is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+* GDSII-Converter is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with the reflow oven controller project.
+* If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <reflow-controller/rotary-encoder.h>
+#include <stm-periph/clock-enable-manager.h>
+#include <stm-periph/stm32-gpio-macros.h>
+
+static inline void rotary_encoder_setup_pins(void)
+{
+	rcc_manager_enable_clock(&RCC->AHB1ENR, BITMASK_TO_BITNO(ROTARY_ENCODER_RCC_MASK));
+	ROTARY_ENCODER_PORT->MODER &= MODER_DELETE(ROTARY_ENCODER_PIN1) & MODER_DELETE(ROTARY_ENCODER_PIN2);
+	ROTARY_ENCODER_PORT->MODER |= ALTFUNC(ROTARY_ENCODER_PIN1) | ALTFUNC(ROTARY_ENCODER_PIN2);
+	SETAF(ROTARY_ENCODER_PORT, ROTARY_ENCODER_PIN1, ROTARY_ENCODER_PORT_ALTFUNC);
+	SETAF(ROTARY_ENCODER_PORT, ROTARY_ENCODER_PIN2, ROTARY_ENCODER_PORT_ALTFUNC);
+}
+
+void rotary_encoder_setup(void)
+{
+	rcc_manager_enable_clock(&RCC->APB1ENR, BITMASK_TO_BITNO(ROTARY_ENCODER_TIMER_RCC_MASK));
+	rotary_encoder_setup_pins();
+
+	ROTARY_ENCODER_TIMER->ARR = 0xFFFF;
+	ROTARY_ENCODER_TIMER->CNT = 0;
+	ROTARY_ENCODER_TIMER->CR2 = 0;
+	ROTARY_ENCODER_TIMER->SMCR = TIM_SMCR_SMS_0 | TIM_SMCR_SMS_1;
+	ROTARY_ENCODER_TIMER->CCMR1 = TIM_CCMR1_CC1S_0 | TIM_CCMR1_CC2S_0;
+	ROTARY_ENCODER_TIMER->CCER = TIM_CCER_CC1P | TIM_CCER_CC2P;
+	ROTARY_ENCODER_TIMER->PSC = 0;
+	ROTARY_ENCODER_TIMER->CR1 = TIM_CR1_CEN;
+}
+
+uint32_t rotary_encoder_get_abs_val(void)
+{
+	return (uint32_t)ROTARY_ENCODER_TIMER->CNT;
+}
+
+int32_t rotary_encoder_get_chage_val(void)
+{
+	static uint32_t last_val = 0;
+	uint32_t val;
+	int32_t diff;
+
+	val = rotary_encoder_get_abs_val();
+
+	diff = val - last_val;
+
+	if (diff > 0xEFFF) {
+		diff = 0xFFFF - diff;
+	}
+
+	return diff;
+}
+
+void rotary_encoder_stop(void)
+{
+	ROTARY_ENCODER_TIMER->CR1 = 0;
+	ROTARY_ENCODER_TIMER->CR2 = 0;
+	ROTARY_ENCODER_TIMER->ARR = 0;
+	rcc_manager_disable_clock(&RCC->APB1ENR, BITMASK_TO_BITNO(ROTARY_ENCODER_TIMER_RCC_MASK));
+	rcc_manager_disable_clock(&RCC->AHB1ENR, BITMASK_TO_BITNO(ROTARY_ENCODER_RCC_MASK));
+}

stm-firmware/shell.c

@@ -1,3 +1,23 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * GDSII-Converter is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
 #include <reflow-controller/shell.h>
 #include <stm-periph/uart.h>
 #include <string.h>
@@ -7,6 +27,8 @@
 #include <helper-macros/helper-macros.h>
 #include <reflow-controller/systick.h>
 #include <stm-periph/unique-id.h>
+#include <reflow-controller/calibration.h>
+#include <reflow-controller/temp-converter.h>
 
 #ifndef GIT_VER
 #define GIT_VER "VERSION NOT SET"
@@ -103,25 +125,46 @@ static shellmatta_retCode_t shell_cmd_pt1000_res(const shellmatta_handle_t   han
 	(void)length;
 	float resistance;
 	int pt1000_status;
-	const char *display_status;
 	enum adc_pt1000_error pt1000_flags;
-	const char *status_text[] = {"VALID", "WATCHDOG", "DATA-OVERFLOW", "UNSTABLE"};
+	char display_status[100];
+	float temp;
+	int temp_conv_status;
+	const char *temp_prefix;
 
+	display_status[0] = 0;
 
-	display_status = status_text[0];
 	pt1000_status = adc_pt1000_get_current_resistance(&resistance);
 
 	if (pt1000_status == 2) {
-		display_status = status_text[3];
+		strcat(display_status, " UNSTABLE ");
 	} else if (pt1000_status) {
 		pt1000_flags = adc_pt1000_check_error();
-		if (pt1000_flags & ADC_PT1000_WATCHDOG_ERROR)
+		if (pt1000_flags & ADC_PT1000_INACTIVE)
-			display_status = status_text[1];
+			strcat(display_status, " DEACTIVATED ");
+		else if (pt1000_flags & ADC_PT1000_WATCHDOG_ERROR)
+			strcat(display_status, " WATCHDOG ");
 		else if (pt1000_flags & ADC_PT1000_OVERFLOW)
-			display_status = status_text[2];
+			strcat(display_status, " OVERFLOW ");
+	} else {
+		strcpy(display_status, "VALID");
 	}
 
-	shellmatta_printf(handle, "PT1000 resistance: %.2f Ohm [%s]\r\n", resistance, display_status);
+	temp_conv_status = temp_converter_convert_resistance_to_temp(resistance, &temp);
+	switch (temp_conv_status) {
+	case 1:
+		temp_prefix = ">";
+		break;
+	case -1:
+		temp_prefix = "<";
+		break;
+	case 0:
+		/* FALLTHRU */
+	default:
+		temp_prefix = "";
+		break;
+	}
+
+	shellmatta_printf(handle, "PT1000 resistance: %.2f Ohm (%s%.1f °C) [%s]\r\n", resistance, temp_prefix,temp, display_status);
 
 	return SHELLMATTA_OK;
 }
@@ -147,6 +190,17 @@ static shellmatta_retCode_t shell_cmd_uptime(const shellmatta_handle_t   handle,
 	shellmatta_printf(handle, "Uptime: %llu secs", global_tick_ms/1000);
 	return SHELLMATTA_OK;
 }
+
+static shellmatta_retCode_t shell_cmd_cal(const shellmatta_handle_t   handle,
+						  const char                  *arguments,
+						  uint32_t length)
+{
+	(void)arguments;
+	(void)length;
+
+	calibration_sequence_shell_cmd(handle);
+	return SHELLMATTA_OK;
+}
 //typedef struct shellmatta_cmd
 //{
 //    char                    *cmd;       /**< command name                           */
@@ -157,7 +211,7 @@ static shellmatta_retCode_t shell_cmd_uptime(const shellmatta_handle_t   handle,
 //    struct shellmatta_cmd   *next;      /**< pointer to next command or NULL        */
 //} shellmatta_cmd_t;
 
-static shellmatta_cmd_t cmd[6] = {
+static shellmatta_cmd_t cmd[7] = {
 	{
 		.cmd = "version",
 		.cmdAlias = "ver",
@@ -204,8 +258,16 @@ static shellmatta_cmd_t cmd[6] = {
 		.helpText = "Get uptime in seconds",
 		.usageText = "",
 		.cmdFct = shell_cmd_uptime,
-		.next = NULL,
+		.next = &cmd[6],
 	},
+	{
+		.cmd = "calibrate",
+		.cmdAlias = "cal",
+		.helpText = "Calibrate resistance measurement",
+		.usageText = "",
+		.cmdFct = shell_cmd_cal,
+		.next = NULL,
+	}
 };
 
 shellmatta_handle_t shell_init(void)

stm-firmware/stm-periph/clock-enable-manager.c

@@ -1,3 +1,23 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * GDSII-Converter is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
 #include <stm-periph/clock-enable-manager.h>
 #include <helper-macros/helper-macros.h>
 #include <stdlib.h>

stm-firmware/stm-periph/dma-ring-buffer.c

@@ -1,3 +1,33 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * GDSII-Converter is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/**
+ * @file dma-ring-buffer.c
+ * @brief DMA Ring buffer implemenation
+ */
+
+/**
+ * @addtogroup dma-ring-buffer
+ * @{
+ */
+
 #include <stm-periph/dma-ring-buffer.h>
 #include <stm-periph/clock-enable-manager.h>
 #include <stdbool.h>
@@ -30,7 +60,7 @@ static int dma_ring_buffer_switch_clock_enable(uint8_t base_dma, bool clk_en)
 
 int dma_ring_buffer_periph_to_mem_initialize(struct dma_ring_buffer_to_mem *dma_buffer, uint8_t base_dma_id,
 					     DMA_Stream_TypeDef *dma_stream, size_t buffer_element_count, size_t element_size,
-					     void *data_buffer, void* src_reg, uint8_t dma_trigger_channel)
+					     volatile void *data_buffer, void* src_reg, uint8_t dma_trigger_channel)
 {
 	int ret_val = 0;
 
@@ -63,7 +93,7 @@ int dma_ring_buffer_periph_to_mem_initialize(struct dma_ring_buffer_to_mem *dma_
 	return 0;
 }
 
-int dma_ring_buffer_periph_to_mem_get_data(struct dma_ring_buffer_to_mem *buff, const void **data_buff, size_t *len)
+int dma_ring_buffer_periph_to_mem_get_data(struct dma_ring_buffer_to_mem *buff, const volatile void **data_buff, size_t *len)
 {
 	int ret_code = 0;
 	uint32_t ndtr;
@@ -72,20 +102,22 @@ int dma_ring_buffer_periph_to_mem_get_data(struct dma_ring_buffer_to_mem *buff,
 	if (!buff || !data_buff || !len)
 		return -1;
 
-
 	ndtr = buff->dma->NDTR;
 	put_idx = buff->buffer_count - ndtr;
 
 	/* Check if wrap around */
 	if (put_idx < buff->get_idx) {
+		/* Available data wraps around end of buffer: Return first part upt to the end of the ring buffer */
 		*data_buff = &(((char *)buff->data_ptr)[buff->get_idx * buff->element_size]);
 		*len = buff->buffer_count - buff->get_idx;
 		buff->get_idx = 0;
-		ret_code = 1;
+		ret_code = 2;
 	} else if (put_idx > buff->get_idx) {
+		/* Data does not wrap around ring buffer. Return full data */
 		*data_buff = &(((char *)buff->data_ptr)[buff->get_idx * buff->element_size]);
 		*len = put_idx - buff->get_idx;
 		buff->get_idx += *len;
+		ret_code = 1;
 	} else {
 		/* No new data */
 		*len = 0;
@@ -109,7 +141,7 @@ void dma_ring_buffer_periph_to_mem_stop(struct dma_ring_buffer_to_mem *buff)
 	memset(buff, 0, sizeof(struct dma_ring_buffer_to_mem));
 }
 
-int dma_ring_buffer_mem_to_periph_initialize(struct dma_ring_buffer_to_periph *dma_buffer, uint8_t base_dma_id, DMA_Stream_TypeDef *dma_stream, size_t buffer_element_count, size_t element_size, void *data_buffer, uint8_t dma_trigger_channel, void *dest_reg)
+int dma_ring_buffer_mem_to_periph_initialize(struct dma_ring_buffer_to_periph *dma_buffer, uint8_t base_dma_id, DMA_Stream_TypeDef *dma_stream, size_t buffer_element_count, size_t element_size, volatile void *data_buffer, uint8_t dma_trigger_channel, void *dest_reg)
 {
 	if (!dma_buffer || !dma_stream || !data_buffer || !dest_reg)
 		return -1000;
@@ -223,7 +255,7 @@ int dma_ring_buffer_mem_to_periph_insert_data(struct dma_ring_buffer_to_periph *
 		first_round_count = buff->element_size * (buff->buffer_count - buff->sw_put_idx);
 		memcpy(dest_ptr, insert_ptr, first_round_count);
 		insert_ptr += first_round_count;
-		memcpy(buff->src_buffer, insert_ptr, count - first_round_count);
+		memcpy((void *)buff->src_buffer, insert_ptr, count - first_round_count);
 
 		/* Move put index */
 		buff->sw_put_idx = count - first_round_count;
@@ -256,3 +288,5 @@ void dma_ring_buffer_mem_to_periph_stop(struct dma_ring_buffer_to_periph *buff)
 	/* Reset the structure */
 	memset(buff, 0, sizeof(struct dma_ring_buffer_to_periph));
 }
+
+/** @} */

stm-firmware/stm-periph/uart.c

@@ -1,3 +1,23 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * GDSII-Converter is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
 #include <stm-periph/uart.h>
 #include <stm32/stm32f4xx.h>
 #include <stm-periph/clock-enable-manager.h>
@@ -87,7 +107,7 @@ void uart_send_string_with_dma(const char *string)
 
 int uart_receive_data_with_dma(const char **data, size_t *len)
 {
-	return dma_ring_buffer_periph_to_mem_get_data(&ring_buff_rx, (const void **)data, len);
+	return dma_ring_buffer_periph_to_mem_get_data(&ring_buff_rx, (const volatile void **)data, len);
 }
 
 void DMA2_Stream7_IRQHandler()

stm-firmware/stm-periph/unique-id.c

@@ -1,3 +1,23 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * GDSII-Converter is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
 #include <stm-periph/unique-id.h>
 
 #define LOW_WORD_ADDR (0x1FFF7A10UL)

stm-firmware/stm32f407vet6_flash.ld

@@ -36,8 +36,8 @@ ENTRY(Reset_Handler)
 _estack = 0x20020000;    /* end of 128K RAM on AHB bus*/
 
 /* Generate a link error if heap and stack don't fit into RAM */
-_Min_Heap_Size = 0x1500;      /* required amount of heap (DEFAULT 0) */
+_Min_Heap_Size = 0x2100;      /* required amount of heap (DEFAULT 0) */
-_Min_Stack_Size = 0x2000 ; /* required amount of stack */
+_Min_Stack_Size = 0x3000 ; /* required amount of stack */
 /* recommended min stack size for printf=0x2000, orig = 0x400 */
 
 /* Specify the memory areas */
@@ -162,14 +162,14 @@ SECTIONS
   /* User_heap_stack section, used to check that there is enough RAM left */
   ._user_heap_stack (NOLOAD):
   {
-    . = ALIGN(4);
+    . = ALIGN(8);
     PROVIDE (heap_low = .); /* for _sbrk */
     PROVIDE ( end = . );
     PROVIDE ( _end = . );
     . = . + _Min_Heap_Size;
     PROVIDE (heap_top = .); /* for _sbrk */
     . = . + _Min_Stack_Size;
-    . = ALIGN(4);
+    . = ALIGN(8);
   } >RAM
 
   /* MEMORY_bank1 section, code must be located here explicitly            */

stm-firmware/syscalls.c

@@ -1,4 +1,28 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * GDSII-Converter is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
 #include <stm-periph/uart.h>
+#include <sys/types.h>
+#include <errno.h>
+#include <stddef.h>
+
 
 char* _sbrk(int incr)
 {
@@ -12,12 +36,16 @@ char* _sbrk(int incr)
 	}
 
 	prev_heap_end = heap_end;
+
+
 	if (heap_end + incr > &heap_top) {
-		return 0;
+		errno = ENOMEM;
+		return (char *)-1;
 	}
 
 	heap_end += incr;
-	return (char*) prev_heap_end;
+
+	return (char *) prev_heap_end;
 }
 
 int _isatty(int fd)
@@ -59,6 +87,6 @@ int _read(void)
 int _write(int fd, const void *buf, int count)
 {
 	if (fd == 1)
-		uart_send_array((char*)buf, count);
+		uart_send_array_with_dma((char*)buf, count);
 	return count;
 }

stm-firmware/systick.c

@@ -1,3 +1,27 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * GDSII-Converter is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/**
+ * @file systick.c
+ */
+
 #include <reflow-controller/systick.h>
 #include <stm32/stm32f4xx.h>
 #include <cmsis/core_cm4.h>
@@ -11,14 +35,6 @@ void systick_setup(void)
 	SysTick_Config(SYSTICK_RELOAD);
 }
 
-/**
- * @brief Wait for x milliseconds
- *
- * This function is not reentrant and must not be called from an interrupt
- *
- * @warning Do not use in interrupt context
- * @param ms wait time in ms
- */
 void systick_wait_ms(uint32_t ms)
 {
 	wait_tick_ms = 0UL;

stm-firmware/temp-converter.c

@@ -0,0 +1,75 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * GDSII-Converter is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <reflow-controller/temp-converter.h>
+#include <reflow-controller/temp-converter-data.h>
+#include <helper-macros/helper-macros.h>
+
+static const float temp_lookup[(TEMP_CONVERSION_MAX_RES-TEMP_CONVERSION_MIN_RES) / TEMP_CONVERSION_RES_STEP+1] = {TEMP_CONVERSION_ARRAY_DATA};
+
+int temp_converter_convert_resistance_to_temp(float resistance, float *temp_out)
+{
+	int ret_val;
+	unsigned int i;
+	unsigned int lower_idx = COUNT_OF(temp_lookup) - 1;
+	float diff_to_low_resistance;
+	float diff_high_low;
+	float low;
+
+	/* Check pointer */
+	if (!temp_out)
+		return -1000;
+
+	if (resistance < TEMP_CONVERSION_MIN_RES) {
+		*temp_out = temp_lookup[0];
+		ret_val = -1;
+		goto return_ret_val;
+	} else if (resistance > TEMP_CONVERSION_MAX_RES) {
+		*temp_out = temp_lookup[COUNT_OF(temp_lookup)-1];
+		ret_val = 1;
+		goto return_ret_val;
+	}
+
+	/* Resistance is in range */
+	ret_val = 0;
+
+	/* Calculate lower index for given reistance */
+	for (i = 1; i < COUNT_OF(temp_lookup); i++) {
+		if (resistance <= TEMP_CONVERSION_MIN_RES + TEMP_CONVERSION_RES_STEP * i) {
+			lower_idx = i - 1;
+			break;
+		}
+	}
+
+	/* Get the lower temperature limit of the current range */
+	low = temp_lookup[lower_idx];
+
+	/* Difference to higher limit */
+	diff_high_low = temp_lookup[lower_idx+1] - low;
+
+	/* Resistance difference to lower limit's resistance value */
+	diff_to_low_resistance = resistance - (float)(TEMP_CONVERSION_MIN_RES + TEMP_CONVERSION_RES_STEP * lower_idx);
+
+	/* Calculate output temperature */
+	*temp_out = (diff_to_low_resistance / TEMP_CONVERSION_RES_STEP) * diff_high_low + low;
+
+return_ret_val:
+	return ret_val;
+}