GUI: About menu: Add '[DEBUG]' text if code is build in debug mode

stm-firmware/Makefile

@@ -13,7 +13,7 @@ LIBRARYPATH = -L. -Lmathlib
 LIBRARIES = -larm_cortexM4lf_math -lm
 
 DEFINES = -DSTM32F407xx -DSTM32F4XX -DARM_MATH_CM4 -DHSE_VALUE=8000000UL
-mapfile = memory-mapping
+MAPFILE_BASE = memory-mapping
 
 export GIT_VER = $(shell git describe --always --dirty --tags)
 DEFINES += -DGIT_VER=$(GIT_VER)
@@ -61,34 +61,39 @@ OBJCOPY=$(CROSS_COMPILE)objcopy
 OBJDUMP=$(CROSS_COMPILE)objdump
 SIZE=$(CROSS_COMPILE)size
 
-LFLAGS = -mlittle-endian -mthumb -mcpu=cortex-m4 -mthumb-interwork
-LFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 --disable-newlib-supplied-syscalls -nostartfiles
-LFLAGS += -Tstm32f407vet6_flash.ld -Wl,-Map=$(mapfile).map
-
-CFLAGS = -c -mlittle-endian -mthumb -mcpu=cortex-m4 -mthumb-interwork
-CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 -nostartfiles
-CFLAGS += -Wall -Wextra -Wold-style-declaration -Wuninitialized -Wmaybe-uninitialized -Wunused-parameter -Wimplicit-fallthrough=3 -Wsign-compare
-
 CFLAGS_RELEASE = -O3 -g
 CFLAGS_DEBUG = -O0 -g
 
 LFLAGS_RELEASE = -Wl,--gc-sections
 LFLAGS_DEBUG =
 
+CFLAGS =
+LFLAGS =
+
 ifneq ($(DEBUGBUILD),true)
 DEFINES += $(RELEASE_DEFINES)
 CFLAGS += $(CFLAGS_RELEASE)
 LFLAGS += $(LFLAGS_RELEASE)
 target = $(TARGET_BASE)-release
 OBJDIR = $(OBJDIR_BASE)/release
+MAPFILE = $(MAPFILE_BASE)-release
 else
 DEFINES += $(DEBUG_DEFINES)
 target = $(TARGET_BASE)-debug
 CFLAGS += $(CFLAGS_DEBUG)
 LFLAGS += $(LFLAGS_DEBUG)
 OBJDIR = $(OBJDIR_BASE)/debug
+MAPFILE = $(MAPFILE_BASE)-debug
 endif
 
+LFLAGS += -mlittle-endian -mthumb -mcpu=cortex-m4 -mthumb-interwork
+LFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 --disable-newlib-supplied-syscalls -nostartfiles
+LFLAGS += -Tstm32f407vet6_flash.ld -Wl,-Map=$(MAPFILE).map
+
+CFLAGS += -c -mlittle-endian -mthumb -mcpu=cortex-m4 -mthumb-interwork
+CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 -nostartfiles
+CFLAGS += -Wall -Wextra -Wold-style-declaration -Wuninitialized -Wmaybe-uninitialized -Wunused-parameter -Wimplicit-fallthrough=3 -Wsign-compare
+
 ####################################################################################
 
 OBJ = $(CFILES:%.c=$(OBJDIR)/%.c.o)
@@ -129,7 +134,10 @@ $(ASOBJ):
 	$(QUIET)$(CC) $(CFLAGS) -MMD -MT $@ $(INCLUDEPATH) $(DEFINES) -o $@ $(@:$(OBJDIR)/%.S.o=%.S)
 
 
-.PHONY: qtproject-legacy qtproject qtproject-debug clean mrproper objcopy disassemble program
+.PHONY: qtproject-legacy qtproject qtproject-debug clean mrproper objcopy disassemble program program-debug
+
+program-debug:
+	$(QUIET)$(MAKE) DEBUGBUILD=true program
 
 program: $(target).elf
 	./program-device.sh $<

stm-firmware/fatfs/shimatta_sdio_driver/shimatta_sdio.c

@@ -238,6 +238,8 @@ static int sdio_check_status_register_cmd13(uint16_t rca, uint32_t *status)
 	uint32_t response;
 	int res;
 
+	*status = 0UL;
+
 	do {
 		sdio_send_cmd(13, (rca<<16)&0xFFFF0000, SHORT_ANS);
 		if (!(res = sdio_get_response(13, SHORT_ANS, &response))) {
@@ -465,10 +467,14 @@ static int sdio_send_select_card_cmd7(uint16_t rca) {
 	} while(--timeout > 0);
 
 	/* Check, if card in in TRANS state */
-	if (sdio_check_status_register_cmd13(rca, &(status.value)))
+	if (sdio_check_status_register_cmd13(rca, &status.value)) {
 		res = -1;
+		goto ret_val;	
+	}
 	if (status.statusstruct.CURRENT_STATE != CURRENT_STATE_TRAN)
 		res = -2;
+
+ret_val:
 	return res;
 }
 
@@ -705,9 +711,10 @@ DRESULT sdio_disk_write(const BYTE *buff, DWORD sector, UINT count)
 
 	while (count) {
 		do {
-			sdio_check_status_register_cmd13(card_info.rca, &status.value);
+			ret = sdio_check_status_register_cmd13(card_info.rca, &status.value);
 		} while (status.statusstruct.CURRENT_STATE == CURRENT_STATE_PRG ||
-			 status.statusstruct.CURRENT_STATE == CURRENT_STATE_RCV);
+			 status.statusstruct.CURRENT_STATE == CURRENT_STATE_RCV ||
+			 !ret);
 
 		if (status.statusstruct.CURRENT_STATE == CURRENT_STATE_STBY) {
 			if (sdio_send_select_card_cmd7(card_info.rca))

stm-firmware/reflow-menu.c

@@ -155,7 +155,11 @@ static void reflow_menu_about(struct lcd_menu *menu, enum menu_entry_func_entry
 		if (strlen(xstr(GIT_VER)) > LCD_CHAR_WIDTH) {
 			menu_lcd_outputf(menu, 2, "%s", &xstr(GIT_VER)[LCD_CHAR_WIDTH]);
 		}
+#ifdef DEBUGBUILD
+		menu_lcd_output(menu, 3, "Page 2/5 [DEBUG]");
+#else
 		menu_lcd_output(menu, 3, "Page 2/5");
+#endif
 		break;
 	case 2:
 		menu_lcd_output(menu, 0, "Compile Info");