fixed #1

Makefile

@@ -3,9 +3,9 @@
 #Compiler:	arm-none-eabi
 #####################################################################################
 #Add Files and Folders below#########################################################
-CFILES 	= main.c syscalls.c UART/uart.c cmsis_boot/system_stm32f4xx.c
+CFILES 	= main.c syscalls/syscalls.c uart/uart.c startup/system_stm32f4xx.c
 ASFILES = boot/startup_stm32f4xx.S
-INCLUDEPATH = -Iboot -Imathlib -Icmsis -Icmsis_boot -IUART
+INCLUDEPATH = -Iinclude
 
 
 target	= stm32f4sdio
@@ -19,8 +19,7 @@ mapfile = dafuqishappening
 
 #TODO
 
-CFILES += FATFS/option/syscall.c FATFS/option/ccsbcs.c FATFS/diskio.c FATFS/ff.c FATFS/shimatta_sdio_driver/shimatta_sdio-driver.c
-INCLUDEPATH += -IFATFS -IFATFS/shimatta_sdio_driver
+CFILES += fatfs/option/syscall.c fatfs/option/ccsbcs.c fatfs/diskio.c fatfs/ff.c fatfs/shimatta_sdio_driver/shimatta_sdio-driver.c
 
 ###################################################################################
 CC=arm-none-eabi-gcc

fatfs/diskio.c

@@ -8,9 +8,8 @@
 /*-----------------------------------------------------------------------*/
 
 //Only ONE device with ONE partition!!!
-#include "diskio.h"		/* FatFs lower layer API */
-#include <shimatta_sdio-driver.h>
-
+#include <fatfs/diskio.h>		/* FatFs lower layer API */
+#include "shimatta_sdio_driver/shimatta_sdio-driver.h"
 /* Definitions of physical drive number for each drive */
 #define SDCARD	0	/* Example: Map ATA harddisk to physical drive 0 */
 

fatfs/ff.c

@@ -16,8 +16,8 @@
 /----------------------------------------------------------------------------*/
 
 
-#include "ff.h"			/* Declarations of FatFs API */
-#include "diskio.h"		/* Declarations of disk I/O functions */
+#include <fatfs/ff.h>		/* Declarations of FatFs API */
+#include <fatfs/diskio.h>		/* Declarations of disk I/O functions */
 
 //For get_fattime:
 //#include <shimatta_sdio-driver.h>

fatfs/option/ccsbcs.c

@@ -25,7 +25,7 @@
 /   1258  Vietnam (OEM, Windows)
 */
 
-#include "../ff.h"
+#include <fatfs/ff.h>
 
 
 #if _CODE_PAGE == 437

fatfs/option/syscall.c

@@ -4,7 +4,7 @@
 /*------------------------------------------------------------------------*/
 
 
-#include "../ff.h"
+#include <fatfs/ff.h>
 
 
 #if _FS_REENTRANT

fatfs/shimatta_sdio_driver/shimatta_sdio-driver.c

@@ -5,7 +5,7 @@
  *  Mario Hüttel
  */
 
-#include <shimatta_sdio-driver.h>
+#include "shimatta_sdio-driver.h"
 
 #define SETAF(PORT,PIN,AF)  PORT->AFR[(PIN < 8 ? 0 : 1)] |= AF << ((PIN < 8 ? PIN : (PIN - 8)) * 4)
 

fatfs/shimatta_sdio_driver/shimatta_sdio-driver.h

@@ -0,0 +1,133 @@
+/*
+ * shimatta_sdio-driver.h
+ *
+ *  Created on: Apr 26, 2015
+ *  Mario Hüttel
+ */
+
+#ifndef FATFS_SHIMATTA_SDIO_DRIVER_SHIMATTA_SDIO_DRIVER_H_
+#define FATFS_SHIMATTA_SDIO_DRIVER_SHIMATTA_SDIO_DRIVER_H_
+
+#include <fatfs/diskio.h>
+#include <stm32f4xx.h>
+
+
+DSTATUS SDIO_status();
+DSTATUS SDIO_initialize();
+DRESULT SDIO_disk_read(BYTE *buff, DWORD sector, UINT count);
+DRESULT SDIO_disk_write(const BYTE *buff, DWORD sector, UINT count);
+DRESULT SDIO_disk_ioctl(BYTE cmd, void* buff);
+DWORD	get_fattime();
+
+
+//Defines for Card Status in struct _CardStatus
+#define CURRENT_STATE_IDLE 0
+#define CURRENT_STATE_READY 1
+#define CURRENT_STATE_IDENT 2
+#define CURRENT_STATE_STBY 3
+#define CURRENT_STATE_TRAN 4
+#define CURRENT_STATE_DATA 5
+#define CURRENT_STATE_RCV 6
+#define CURRENT_STATE_PRG 7
+#define CURRENT_STATE_DIS 8
+
+
+
+typedef struct _CardStatus {
+    uint32_t reserved           : 3;
+    uint32_t AKE_SEQ_ERROR      : 1;
+    uint32_t reserved_2         : 1;
+    uint32_t APP_CMD            : 1;
+    uint32_t reserved_3         : 2;
+    uint32_t READY_FOR_DATA     : 1;
+    uint32_t CURRENT_STATE      : 4;
+    uint32_t ERASE_RESET        : 1;
+    uint32_t CARD_ECC_DIABLED   : 1;
+    uint32_t WP_ERASE_SKIP      : 1;
+    uint32_t CSD_OVERWRITE      : 1;
+    uint32_t reserved17         : 1;
+    uint32_t reserved18         : 1;
+    uint32_t ERROR              : 1;
+    uint32_t CC_ERROR           : 1;
+    uint32_t CARD_ECC_FAILED    : 1;
+    uint32_t ILLEGAL_COMMAND    : 1;
+    uint32_t COM_CRC_ERROR      : 1;
+    uint32_t LOCK_UNLOCK_FAILED : 1;
+    uint32_t CARD_IS_LOCKED     : 1;
+    uint32_t WP_VIOLATION       : 1;
+    uint32_t ERASE_PARAM        : 1;
+    uint32_t ERASE_SEQ_ERROR    : 1;
+    uint32_t BLOCK_LEN_ERROR    : 1;
+    uint32_t ADDRESS_ERROR      : 1;
+    uint32_t OUT_OF_RANGE       : 1;
+}CardStatus_t;
+
+
+
+typedef enum {CARD_NONE = 0, MMC, SD_V1, SD_V2_SC, SD_V2_HC} card_type_t;
+                        // MMC not supported
+typedef struct _SDInfo {
+    uint16_t rca;
+    card_type_t type;
+}SDInfo_t;
+
+typedef union _StatusConv {
+    CardStatus_t statusstruct;
+    uint32_t value;
+}StatusConv_t;
+
+//General Definitions
+//Blocksize: 512 = 2^9 => 9
+#define BLOCKSIZE 9     //9
+//Hardware Flow: Prevents over- and underruns.
+#define HW_FLOW   0     //0
+//1 bit: 0
+//4 bit: 1
+#define BUSWIDTH  1     //1
+//Initial Transfer CLK (ca. 400kHz)
+#define INITCLK   120   //120
+//Working CLK (Maximum)
+#define WORKCLK   0     //0
+//Data Timeout in CLK Cycles
+#define DTIMEOUT  150   //150
+//DMA Stream used for TX and RX DMA2 Stream 3 or 6 possible
+#define DMASTREAM DMA2_Stream3
+
+
+
+//Port Definitions
+
+#define PORTCLKMASK (RCC_AHB1ENR_GPIODEN | RCC_AHB1ENR_GPIOCEN)
+
+#define ALTFUNC     12
+
+#define CLKPORT     GPIOC
+#define D0PORT      GPIOC
+#define D1PORT      GPIOC
+#define D2PORT      GPIOC
+#define D3PORT      GPIOC
+#define CMDPORT     GPIOD
+
+#define CLKPIN      12
+#define D0PIN       8
+#define D1PIN       9
+#define D2PIN       10
+#define D3PIN       11
+#define CMDPIN      2
+
+// Write Protection
+#define SDIO_ENABLE_WRITEPROT 0
+#define WRITEPROT_PORT GPIOD // Add this port to port clock mask!
+#define WRITEPROT_PIN 0
+#define WRITEPROT_PULLUP 0
+#define WRITEPROT_ACTIVE_LEVEL 0
+
+// Card inserted pin
+#define SDIO_ENABLE_INS 0
+#define INS_PORT GPIOD // Add this port to port clock mask!
+#define INS_PIN 0
+#define INS_PULLUP 0
+#define INS_ACTIVE_LEVEL 0
+
+
+#endif /* FATFS_SHIMATTA_SDIO_DRIVER_SHIMATTA_SDIO_DRIVER_H_ */

include/cmsis/core_cm4.h

@@ -151,9 +151,9 @@
 #endif
 
 #include <stdint.h>                      /* standard types definitions                      */
-#include <core_cmInstr.h>                /* Core Instruction Access                         */
-#include <core_cmFunc.h>                 /* Core Function Access                            */
-#include <core_cm4_simd.h>               /* Compiler specific SIMD Intrinsics               */
+#include "core_cmInstr.h"                /* Core Instruction Access                         */
+#include "core_cmFunc.h"                 /* Core Function Access                            */
+#include "core_cm4_simd.h"               /* Compiler specific SIMD Intrinsics               */
 
 #endif /* __CORE_CM4_H_GENERIC */
 

include/stm32f407xx.h

@@ -181,8 +181,8 @@ typedef enum
   * @}
   */
 
-#include "core_cm4.h"             /* Cortex-M4 processor and core peripherals */
-#include "system_stm32f4xx.h"
+#include <cmsis/core_cm4.h>             /* Cortex-M4 processor and core peripherals */
+#include <startup/system_stm32f4xx.h>
 #include <stdint.h>
 
 /** @addtogroup Peripheral_registers_structures

main.c

@@ -5,10 +5,8 @@
  *      Author: mari
  */
 #include <stm32f4xx.h>
-#include <arm_math.h>
-#include <system_stm32f4xx.h>
-
-#include <ff.h>
+#include <cmsis/arm_math.h>
+#include <fatfs/ff.h>
 
 #define OUTPUT(pin)  (0b01 << (pin * 2))
 

startup/system_stm32f4xx.c

@@ -114,7 +114,7 @@
   * @{
   */
 
-#include "stm32f4xx.h"
+#include <stm32f4xx.h>
 
 /**
   * @}

syscalls/syscalls.c

@@ -2,10 +2,10 @@
  * syscalls.c
  *
  *  Created on: Dec 14, 2014
- *      Author: shino-chan
+ *      Author: Mario Huettel <mario.huettel@gmx.net>
  */
 
-#include "uart.h"
+#include <uart/uart.h>
 
 char* _sbrk(int incr) {
             extern char heap_low;    // Defined by the linker

uart/uart.c

@@ -8,7 +8,7 @@
 //PA2 => TX
 //PA3 => RX
 //Alternate Function 7
-#include "uart.h"
+#include <uart/uart.h>
 #include <stm32f4xx.h>
 
 void initUART() {