fpga/avalon-dma
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
master
avalon-dma/design/dma_verilog/wb_dma_de.v
Mario Hüttel 9d67bb6b01 init commit
2018-03-06 15:11:37 +01:00

629 lines
19 KiB
Verilog
Raw Permalink Blame History

/////////////////////////////////////////////////////////////////////
//// ////
//// WISHBONE DMA DMA Engine Core ////
//// ////
//// ////
//// Author: Rudolf Usselmann ////
//// rudi@asics.ws ////
//// ////
//// ////
//// Downloaded from: http://www.opencores.org/cores/wb_dma/ ////
//// ////
/////////////////////////////////////////////////////////////////////
//// ////
//// Copyright (C) 2000-2002 Rudolf Usselmann ////
//// www.asics.ws ////
//// rudi@asics.ws ////
//// ////
//// This source file may be used and distributed without ////
//// restriction provided that this copyright statement is not ////
//// removed from the file and that any derivative work contains ////
//// the original copyright notice and the associated disclaimer.////
//// ////
//// THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY ////
//// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED ////
//// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS ////
//// FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE AUTHOR ////
//// OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, ////
//// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ////
//// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE ////
//// GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR ////
//// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ////
//// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ////
//// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT ////
//// OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ////
//// POSSIBILITY OF SUCH DAMAGE. ////
//// ////
/////////////////////////////////////////////////////////////////////
// CVS Log
//
// $Id: wb_dma_de.v,v 1.3 2002-02-01 01:54:45 rudi Exp $
//
// $Date: 2002-02-01 01:54:45 $
// $Revision: 1.3 $
// $Author: rudi $
// $Locker: $
// $State: Exp $
//
// Change History:
// $Log: not supported by cvs2svn $
// Revision 1.2 2001/08/15 05:40:30 rudi
//
// - Changed IO names to be more clear.
// - Uniquifyed define names to be core specific.
// - Added Section 3.10, describing DMA restart.
//
// Revision 1.1 2001/07/29 08:57:02 rudi
//
//
// 1) Changed Directory Structure
// 2) Added restart signal (REST)
//
// Revision 1.3 2001/06/13 02:26:48 rudi
//
//
// Small changes after running lint.
//
// Revision 1.2 2001/06/05 10:22:36 rudi
//
//
// - Added Support of up to 31 channels
// - Added support for 2,4 and 8 priority levels
// - Now can have up to 31 channels
// - Added many configuration items
// - Changed reset to async
//
// Revision 1.1.1.1 2001/03/19 13:10:44 rudi
// Initial Release
//
//
//
`include "wb_dma_defines.v"
module wb_dma_de(clk, rst,
// WISHBONE MASTER INTERFACE 0
mast0_go, mast0_we, mast0_adr, mast0_din,
mast0_dout, mast0_err, mast0_drdy, mast0_wait,
// WISHBONE MASTER INTERFACE 1
mast1_go, mast1_we, mast1_adr, mast1_din,
mast1_dout, mast1_err, mast1_drdy, mast1_wait,
// DMA Engine Init & Setup
de_start, nd, csr, pointer, pointer_s, txsz,
adr0, adr1, am0, am1,
// DMA Engine Register File Update Outputs
de_csr_we, de_txsz_we, de_adr0_we, de_adr1_we, ptr_set,
de_csr, de_txsz, de_adr0, de_adr1, de_fetch_descr,
// DMA Engine Control Outputs
next_ch, de_ack,
// DMA Engine Status
pause_req, paused,
dma_abort, dma_busy, dma_err, dma_done, dma_done_all
);
input clk, rst;
// --------------------------------------
// WISHBONE MASTER INTERFACE 0
output mast0_go; // Perform a Master Cycle
output mast0_we; // Read/Write
output [31:0] mast0_adr; // Address for the transfer
input [31:0] mast0_din; // Internal Input Data
output [31:0] mast0_dout; // Internal Output Data
input mast0_err; // Indicates an error has occurred
input mast0_drdy; // Indicated that either data is available
// during a read, or that the master can accept
// the next data during a write
output mast0_wait; // Tells the master to insert wait cycles
// because data can not be accepted/provided
// --------------------------------------
// WISHBONE MASTER INTERFACE 1
output mast1_go; // Perform a Master Cycle
output mast1_we; // Read/Write
output [31:0] mast1_adr; // Address for the transfer
input [31:0] mast1_din; // Internal Input Data
output [31:0] mast1_dout; // Internal Output Data
input mast1_err; // Indicates an error has occurred
input mast1_drdy; // Indicated that either data is available
// during a read, or that the master can accept
// the next data during a write
output mast1_wait; // Tells the master to insert wait cycles
// because data can not be accepted/provided
// --------------------------------------
// DMA Engine Signals
// DMA Engine Init & Setup
input de_start; // Start DMA Engine Indicator
input nd; // Next Descriptor Indicator
input [31:0] csr; // Selected Channel CSR
input [31:0] pointer; // Linked List Descriptor pointer
input [31:0] pointer_s; // Previous Pointer
input [31:0] txsz; // Selected Channel Transfer Size
input [31:0] adr0, adr1; // Selected Channel Addresses
input [31:0] am0, am1; // Selected Channel Address Masks
// DMA Engine Register File Update Outputs
output de_csr_we; // Write enable for csr register
output de_txsz_we; // Write enable for txsz register
output de_adr0_we; // Write enable for adr0 register
output de_adr1_we; // Write enable for adr1 register
output ptr_set; // Set Pointer as Valid
output [31:0] de_csr; // Write Data for CSR when loading External Desc.
output [11:0] de_txsz; // Write back data for txsz register
output [31:0] de_adr0; // Write back data for adr0 register
output [31:0] de_adr1; // Write back data for adr1 register
output de_fetch_descr; // Indicates that we are fetching a descriptor
// DMA Engine Control Outputs
output next_ch; // Indicates the DMA Engine is done
output de_ack;
// DMA Abort from RF (software forced abort)
input dma_abort;
// DMA Engine Status
input pause_req;
output paused;
output dma_busy, dma_err, dma_done, dma_done_all;
////////////////////////////////////////////////////////////////////
//
// Local Wires
//
parameter [10:0] // synopsys enum state
IDLE = 11'b000_0000_0001,
READ = 11'b000_0000_0010,
WRITE = 11'b000_0000_0100,
UPDATE = 11'b000_0000_1000,
LD_DESC1 = 11'b000_0001_0000,
LD_DESC2 = 11'b000_0010_0000,
LD_DESC3 = 11'b000_0100_0000,
LD_DESC4 = 11'b000_1000_0000,
LD_DESC5 = 11'b001_0000_0000,
WB = 11'b010_0000_0000,
PAUSE = 11'b100_0000_0000;
reg [10:0] /* synopsys enum state */ state, next_state;
// synopsys state_vector state
reg [31:0] mast0_adr, mast1_adr;
reg [29:0] adr0_cnt, adr1_cnt;
wire [29:0] adr0_cnt_next, adr1_cnt_next;
wire [29:0] adr0_cnt_next1, adr1_cnt_next1;
reg adr0_inc, adr1_inc;
reg [8:0] chunk_cnt;
reg chunk_dec;
reg [11:0] tsz_cnt;
reg tsz_dec;
reg de_txsz_we;
reg de_csr_we;
reg de_adr0_we;
reg de_adr1_we;
reg ld_desc_sel;
wire chunk_cnt_is_0_d;
reg chunk_cnt_is_0_r;
wire tsz_cnt_is_0_d;
reg tsz_cnt_is_0_r;
reg read, write;
reg read_r, write_r;
wire rd_ack, wr_ack;
reg rd_ack_r;
reg chunk_0;
wire done;
reg dma_done_d;
reg dma_done_r;
reg dma_abort_r;
reg next_ch;
wire read_hold, write_hold;
reg write_hold_r;
reg [1:0] ptr_adr_low;
reg m0_go;
reg m0_we;
reg ptr_set;
// Aliases
wire a0_inc_en = csr[4]; // Source Address (Adr 0) increment enable
wire a1_inc_en = csr[3]; // Dest. Address (Adr 1) increment enable
wire ptr_valid = pointer[0];
wire use_ed = csr[`WDMA_USE_ED];
reg mast0_drdy_r;
reg paused;
reg de_fetch_descr; // Indicates that we are fetching a descriptor
////////////////////////////////////////////////////////////////////
//
// Misc Logic
//
always @(posedge clk)
dma_done_r <= #1 dma_done;
// Address Counter 0 (Source Address)
always @(posedge clk)
if(de_start | ptr_set) adr0_cnt <= #1 adr0[31:2];
else
if(adr0_inc & a0_inc_en) adr0_cnt <= #1 adr0_cnt_next;
// 30 Bit Incrementor (registered)
wb_dma_inc30r u0( .clk( clk ),
.in( adr0_cnt ),
.out( adr0_cnt_next1 ) );
assign adr0_cnt_next[1:0] = adr0_cnt_next1[1:0];
assign adr0_cnt_next[2] = am0[4] ? adr0_cnt_next1[2] : adr0_cnt[2];
assign adr0_cnt_next[3] = am0[5] ? adr0_cnt_next1[3] : adr0_cnt[3];
assign adr0_cnt_next[4] = am0[6] ? adr0_cnt_next1[4] : adr0_cnt[4];
assign adr0_cnt_next[5] = am0[7] ? adr0_cnt_next1[5] : adr0_cnt[5];
assign adr0_cnt_next[6] = am0[8] ? adr0_cnt_next1[6] : adr0_cnt[6];
assign adr0_cnt_next[7] = am0[9] ? adr0_cnt_next1[7] : adr0_cnt[7];
assign adr0_cnt_next[8] = am0[10] ? adr0_cnt_next1[8] : adr0_cnt[8];
assign adr0_cnt_next[9] = am0[11] ? adr0_cnt_next1[9] : adr0_cnt[9];
assign adr0_cnt_next[10] = am0[12] ? adr0_cnt_next1[10] : adr0_cnt[10];
assign adr0_cnt_next[11] = am0[13] ? adr0_cnt_next1[11] : adr0_cnt[11];
assign adr0_cnt_next[12] = am0[14] ? adr0_cnt_next1[12] : adr0_cnt[12];
assign adr0_cnt_next[13] = am0[15] ? adr0_cnt_next1[13] : adr0_cnt[13];
assign adr0_cnt_next[14] = am0[16] ? adr0_cnt_next1[14] : adr0_cnt[14];
assign adr0_cnt_next[15] = am0[17] ? adr0_cnt_next1[15] : adr0_cnt[15];
assign adr0_cnt_next[16] = am0[18] ? adr0_cnt_next1[16] : adr0_cnt[16];
assign adr0_cnt_next[17] = am0[19] ? adr0_cnt_next1[17] : adr0_cnt[17];
assign adr0_cnt_next[18] = am0[20] ? adr0_cnt_next1[18] : adr0_cnt[18];
assign adr0_cnt_next[19] = am0[21] ? adr0_cnt_next1[19] : adr0_cnt[19];
assign adr0_cnt_next[20] = am0[22] ? adr0_cnt_next1[20] : adr0_cnt[20];
assign adr0_cnt_next[21] = am0[23] ? adr0_cnt_next1[21] : adr0_cnt[21];
assign adr0_cnt_next[22] = am0[24] ? adr0_cnt_next1[22] : adr0_cnt[22];
assign adr0_cnt_next[23] = am0[25] ? adr0_cnt_next1[23] : adr0_cnt[23];
assign adr0_cnt_next[24] = am0[26] ? adr0_cnt_next1[24] : adr0_cnt[24];
assign adr0_cnt_next[25] = am0[27] ? adr0_cnt_next1[25] : adr0_cnt[25];
assign adr0_cnt_next[26] = am0[28] ? adr0_cnt_next1[26] : adr0_cnt[26];
assign adr0_cnt_next[27] = am0[29] ? adr0_cnt_next1[27] : adr0_cnt[27];
assign adr0_cnt_next[28] = am0[30] ? adr0_cnt_next1[28] : adr0_cnt[28];
assign adr0_cnt_next[29] = am0[31] ? adr0_cnt_next1[29] : adr0_cnt[29];
// Address Counter 1 (Destination Address)
always @(posedge clk)
if(de_start | ptr_set) adr1_cnt <= #1 adr1[31:2];
else
if(adr1_inc & a1_inc_en) adr1_cnt <= #1 adr1_cnt_next;
// 30 Bit Incrementor (registered)
wb_dma_inc30r u1( .clk( clk ),
.in( adr1_cnt ),
.out( adr1_cnt_next1 ) );
assign adr1_cnt_next[1:0] = adr1_cnt_next1[1:0];
assign adr1_cnt_next[2] = am1[4] ? adr1_cnt_next1[2] : adr1_cnt[2];
assign adr1_cnt_next[3] = am1[5] ? adr1_cnt_next1[3] : adr1_cnt[3];
assign adr1_cnt_next[4] = am1[6] ? adr1_cnt_next1[4] : adr1_cnt[4];
assign adr1_cnt_next[5] = am1[7] ? adr1_cnt_next1[5] : adr1_cnt[5];
assign adr1_cnt_next[6] = am1[8] ? adr1_cnt_next1[6] : adr1_cnt[6];
assign adr1_cnt_next[7] = am1[9] ? adr1_cnt_next1[7] : adr1_cnt[7];
assign adr1_cnt_next[8] = am1[10] ? adr1_cnt_next1[8] : adr1_cnt[8];
assign adr1_cnt_next[9] = am1[11] ? adr1_cnt_next1[9] : adr1_cnt[9];
assign adr1_cnt_next[10] = am1[12] ? adr1_cnt_next1[10] : adr1_cnt[10];
assign adr1_cnt_next[11] = am1[13] ? adr1_cnt_next1[11] : adr1_cnt[11];
assign adr1_cnt_next[12] = am1[14] ? adr1_cnt_next1[12] : adr1_cnt[12];
assign adr1_cnt_next[13] = am1[15] ? adr1_cnt_next1[13] : adr1_cnt[13];
assign adr1_cnt_next[14] = am1[16] ? adr1_cnt_next1[14] : adr1_cnt[14];
assign adr1_cnt_next[15] = am1[17] ? adr1_cnt_next1[15] : adr1_cnt[15];
assign adr1_cnt_next[16] = am1[18] ? adr1_cnt_next1[16] : adr1_cnt[16];
assign adr1_cnt_next[17] = am1[19] ? adr1_cnt_next1[17] : adr1_cnt[17];
assign adr1_cnt_next[18] = am1[20] ? adr1_cnt_next1[18] : adr1_cnt[18];
assign adr1_cnt_next[19] = am1[21] ? adr1_cnt_next1[19] : adr1_cnt[19];
assign adr1_cnt_next[20] = am1[22] ? adr1_cnt_next1[20] : adr1_cnt[20];
assign adr1_cnt_next[21] = am1[23] ? adr1_cnt_next1[21] : adr1_cnt[21];
assign adr1_cnt_next[22] = am1[24] ? adr1_cnt_next1[22] : adr1_cnt[22];
assign adr1_cnt_next[23] = am1[25] ? adr1_cnt_next1[23] : adr1_cnt[23];
assign adr1_cnt_next[24] = am1[26] ? adr1_cnt_next1[24] : adr1_cnt[24];
assign adr1_cnt_next[25] = am1[27] ? adr1_cnt_next1[25] : adr1_cnt[25];
assign adr1_cnt_next[26] = am1[28] ? adr1_cnt_next1[26] : adr1_cnt[26];
assign adr1_cnt_next[27] = am1[29] ? adr1_cnt_next1[27] : adr1_cnt[27];
assign adr1_cnt_next[28] = am1[30] ? adr1_cnt_next1[28] : adr1_cnt[28];
assign adr1_cnt_next[29] = am1[31] ? adr1_cnt_next1[29] : adr1_cnt[29];
// Chunk Counter
always @(posedge clk)
if(de_start) chunk_cnt <= #1 txsz[24:16];
else
if(chunk_dec & !chunk_cnt_is_0_r) chunk_cnt <= #1 chunk_cnt - 9'h1;
assign chunk_cnt_is_0_d = (chunk_cnt == 9'h0);
always @(posedge clk)
chunk_cnt_is_0_r <= #1 chunk_cnt_is_0_d;
// Total Size Counter
always @(posedge clk)
if(de_start | ptr_set) tsz_cnt <= #1 txsz[11:0];
else
if(tsz_dec & !tsz_cnt_is_0_r) tsz_cnt <= #1 tsz_cnt - 12'h1;
assign tsz_cnt_is_0_d = (tsz_cnt == 12'h0) & !txsz[15];
always @(posedge clk)
tsz_cnt_is_0_r <= #1 tsz_cnt_is_0_d;
// Counter Control Logic
always @(posedge clk)
chunk_dec <= #1 read & !read_r;
always @(posedge clk)
tsz_dec <= #1 read & !read_r;
//always @(posedge clk)
always @(rd_ack or read_r)
adr0_inc = rd_ack & read_r;
//always @(posedge clk)
always @(wr_ack or write_r)
adr1_inc = wr_ack & write_r;
// Done logic
always @(posedge clk)
chunk_0 <= #1 (txsz[24:16] == 9'h0);
assign done = chunk_0 ? tsz_cnt_is_0_d : (tsz_cnt_is_0_d | chunk_cnt_is_0_d);
assign dma_done = dma_done_d & done;
assign dma_done_all = dma_done_d & (tsz_cnt_is_0_r | (nd & chunk_cnt_is_0_d));
always @(posedge clk)
next_ch <= #1 dma_done;
// Register Update Outputs
assign de_txsz = ld_desc_sel ? mast0_din[11:0] : tsz_cnt;
assign de_adr0 = ld_desc_sel ? mast0_din : {adr0_cnt, 2'b00};
assign de_adr1 = ld_desc_sel ? mast0_din : {adr1_cnt, 2'b00};
assign de_csr = mast0_din;
// Abort logic
always @(posedge clk)
dma_abort_r <= #1 dma_abort | mast0_err | mast1_err;
assign dma_err = dma_abort_r;
assign dma_busy = (state != IDLE);
////////////////////////////////////////////////////////////////////
//
// WISHBONE Interface Logic
//
always @(posedge clk)
read_r <= #1 read;
always @(posedge clk)
write_r <= #1 write;
always @(posedge clk)
rd_ack_r <= #1 read_r;
// Data Path
assign mast0_dout = m0_we ? {20'h0, tsz_cnt} : csr[2] ? mast1_din : mast0_din;
assign mast1_dout = csr[2] ? mast1_din : mast0_din;
// Address Path
always @(posedge clk)
mast0_adr <= #1 m0_go ?
(m0_we ? pointer_s : {pointer[31:4], ptr_adr_low, 2'b00}) :
read ? {adr0_cnt, 2'b00} : {adr1_cnt, 2'b00};
always @(posedge clk)
mast1_adr <= #1 read ? {adr0_cnt, 2'b00} : {adr1_cnt, 2'b00};
// CTRL
assign write_hold = (read | write) & write_hold_r;
always @(posedge clk)
write_hold_r <= #1 read | write;
assign read_hold = done ? read : (read | write);
assign mast0_go = (!csr[2] & read_hold) | (!csr[1] & write_hold) | m0_go;
assign mast1_go = ( csr[2] & read_hold) | ( csr[1] & write_hold);
assign mast0_we = m0_go ? m0_we : (!csr[1] & write);
assign mast1_we = csr[1] & write;
assign rd_ack = (csr[2] ? mast1_drdy : mast0_drdy);
assign wr_ack = (csr[1] ? mast1_drdy : mast0_drdy);
assign mast0_wait = !((!csr[2] & read) | (!csr[1] & write)) & !m0_go;
assign mast1_wait = !(( csr[2] & read) | ( csr[1] & write));
always @(posedge clk)
mast0_drdy_r <= #1 mast0_drdy;
assign de_ack = dma_done;
////////////////////////////////////////////////////////////////////
//
// State Machine
//
always @(posedge clk or negedge rst)
if(!rst) state <= #1 IDLE;
else state <= #1 next_state;
always @(state or pause_req or dma_abort_r or de_start or rd_ack or wr_ack or
done or ptr_valid or use_ed or mast0_drdy or mast0_drdy_r or csr or nd)
begin
next_state = state; // Default keep state
read = 1'b0;
write = 1'b0;
dma_done_d = 1'b0;
de_csr_we = 1'b0;
de_txsz_we = 1'b0;
de_adr0_we = 1'b0;
de_adr1_we = 1'b0;
de_fetch_descr = 1'b0;
m0_go = 1'b0;
m0_we = 1'b0;
ptr_adr_low = 2'h0;
ptr_set = 1'b0;
ld_desc_sel = 1'b0;
paused = 1'b0;
case(state) // synopsys parallel_case full_case
IDLE:
begin
if(pause_req) next_state = PAUSE;
else
if(de_start & !csr[`WDMA_ERR])
begin
if(use_ed & !ptr_valid) next_state = LD_DESC1;
else next_state = READ;
end
end
PAUSE:
begin
paused = 1'b1;
if(!pause_req) next_state = IDLE;
end
READ: // Read From Source
begin
if(dma_abort_r) next_state = UPDATE;
else
if(!rd_ack) read = 1'b1;
else
begin
write = 1'b1;
next_state = WRITE;
end
end
WRITE: // Write To Destination
begin
if(dma_abort_r) next_state = UPDATE;
else
if(!wr_ack) write = 1'b1;
else
begin
if(done) next_state = UPDATE;
else
begin
read = 1'b1;
next_state = READ;
end
end
end
UPDATE: // Update Registers
begin
dma_done_d = 1'b1;
de_txsz_we = 1'b1;
de_adr0_we = 1'b1;
de_adr1_we = 1'b1;
if(use_ed & csr[`WDMA_WRB] & nd)
begin
m0_we = 1'b1;
m0_go = 1'b1;
next_state = WB;
end
else next_state = IDLE;
end
WB:
begin
m0_we = 1'b1;
if(mast0_drdy)
begin
next_state = IDLE;
end
else m0_go = 1'b1;
end
LD_DESC1: // Load Descriptor from memory to registers
begin
ptr_adr_low = 2'h0;
ld_desc_sel = 1'b1;
m0_go = 1'b1;
de_csr_we = 1'b1;
de_txsz_we = 1'b1;
de_fetch_descr = 1'b1;
if(mast0_drdy)
begin
ptr_adr_low = 2'h1;
next_state = LD_DESC2;
end
end
LD_DESC2:
begin
de_fetch_descr = 1'b1;
if(mast0_drdy_r) de_csr_we = 1'b1;
if(mast0_drdy_r) de_txsz_we = 1'b1;
ptr_adr_low = 2'h1;
ld_desc_sel = 1'b1;
m0_go = 1'b1;
if(mast0_drdy)
begin
ptr_adr_low = 2'h2;
next_state = LD_DESC3;
end
end
LD_DESC3:
begin
de_fetch_descr = 1'b1;
if(mast0_drdy_r) de_adr0_we = 1'b1;
ptr_adr_low = 2'h2;
ld_desc_sel = 1'b1;
m0_go = 1'b1;
if(mast0_drdy)
begin
ptr_adr_low = 2'h3;
next_state = LD_DESC4;
end
end
LD_DESC4:
begin
de_fetch_descr = 1'b1;
if(mast0_drdy_r) de_adr1_we = 1'b1;
ptr_adr_low = 2'h3;
ld_desc_sel = 1'b1;
if(mast0_drdy)
begin
next_state = LD_DESC5;
end
else m0_go = 1'b1;
end
LD_DESC5:
begin
de_fetch_descr = 1'b1;
ptr_set = 1'b1;
next_state = READ;
end
endcase
end
endmodule
Reference in New Issue View Git Blame Copy Permalink