pcb
/
reflow-oven-control-pcb
1
0
Fork 0
Code Issues Pull Requests Releases 5 Wiki Activity
reflow-oven-control-pcb/reflow-oven-control-pcb.kic...

12034 lines
958 KiB
Plaintext
Raw Normal View History

Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(kicad_pcb (version 20171130) (host pcbnew 5.1.5)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(general
(thickness 1.6)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(drawings 45)
Move vias to better locations: These vias have proven unfortunately placed for hand soldering
2020-02-05 22:12:31 +01:00
(tracks 1819)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(zones 0)
Re-annotate components
2020-02-05 18:58:36 +01:00
(modules 130)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(nets 134)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
)
(page A4)
(layers
(0 F.Cu signal)
(31 B.Cu signal)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
(32 B.Adhes user)
(33 F.Adhes user)
(34 B.Paste user)
(35 F.Paste user)
(36 B.SilkS user)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(37 F.SilkS user)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
(38 B.Mask user)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(39 F.Mask user)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
(40 Dwgs.User user)
(41 Cmts.User user)
(42 Eco1.User user)
(43 Eco2.User user)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(44 Edge.Cuts user)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
(45 Margin user)
(46 B.CrtYd user)
(47 F.CrtYd user)
Improve layout, change color of B.Silk and improve schematic
2020-01-12 14:56:58 +01:00
(48 B.Fab user)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(49 F.Fab user hide)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
)
(setup
Re-annotate components
2020-02-05 18:58:36 +01:00
(last_trace_width 0.25)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(user_trace_width 0.3)
(user_trace_width 0.4)
(user_trace_width 0.6)
(user_trace_width 1)
(user_trace_width 2)
(trace_clearance 0.2)
(zone_clearance 0.25)
(zone_45_only no)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(trace_min 0.21)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(via_size 0.5)
(via_drill 0.3)
(via_min_size 0.4)
(via_min_drill 0.3)
(user_via 0.9 0.5)
(uvia_size 0.3)
(uvia_drill 0.1)
(uvias_allowed no)
(uvia_min_size 0.2)
(uvia_min_drill 0.1)
(edge_width 0.05)
(segment_width 0.2)
(pcb_text_width 0.3)
(pcb_text_size 1.5 1.5)
(mod_edge_width 0.12)
(mod_text_size 1 1)
(mod_text_width 0.15)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(pad_size 0.7874 0.7874)
(pad_drill 0)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(pad_to_mask_clearance 0.051)
(solder_mask_min_width 0.25)
(aux_axis_origin 13 13)
(grid_origin 13 13)
(visible_elements FFFFFF7F)
(pcbplotparams
(layerselection 0x010fc_ffffffff)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(usegerberextensions true)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(usegerberattributes false)
(usegerberadvancedattributes false)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(creategerberjobfile true)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(excludeedgelayer true)
(linewidth 0.100000)
(plotframeref false)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(viasonmask true)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(mode 1)
(useauxorigin false)
(hpglpennumber 1)
(hpglpenspeed 20)
(hpglpendiameter 15.000000)
(psnegative false)
(psa4output false)
(plotreference true)
(plotvalue true)
(plotinvisibletext false)
(padsonsilk false)
(subtractmaskfromsilk false)
(outputformat 1)
(mirror false)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(drillshape 0)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(scaleselection 1)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(outputdirectory "gerber/"))
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
)
(net 0 "")
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(net 1 Earth)
(net 2 GND)
(net 3 +8V)
(net 4 +3V3)
Improved layout, Add QR code, Add external ADC option for 22 bit ADC
2019-12-26 18:01:55 +01:00
(net 5 +5V)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 6 /Controller/ENC1)
(net 7 /Controller/ENC2)
(net 8 /Controller/VREF)
(net 9 /Controller/SW1)
(net 10 /Frontend/FORCE+)
(net 11 /Frontend/FORCE-)
(net 12 /Frontend/SENS+)
(net 13 /Frontend/SENS-)
(net 14 /Controller/SDIO_D1)
(net 15 /Controller/SDIO_D0)
(net 16 /Controller/SDIO_CLK)
(net 17 /Controller/SDIO_CMD)
(net 18 /Controller/SDIO_D3)
(net 19 /Controller/SDIO_D2)
(net 20 "Net-(D102-Pad1)")
(net 21 /Controller/TEMP_IN)
(net 22 /L_Trafo)
(net 23 /L_IN)
(net 24 /N_IN)
(net 25 /DIGIO3)
(net 26 /DIGIO2)
(net 27 /DIGIO1)
(net 28 /DIGIO0)
(net 29 /Controller/SWDIO)
(net 30 /Controller/SWCLK)
(net 31 /Controller/PC_RX)
(net 32 /Controller/PC_TX)
(net 33 /Controller/~RST)
(net 34 "Net-(LS101-Pad1)")
(net 35 /Controller/LCD_VO)
(net 36 /Controller/LCD_RS)
(net 37 /Controller/LCD_EN)
(net 38 /Controller/LCD_D3)
(net 39 /Controller/LCD_D0)
(net 40 /Controller/LCD_D2)
(net 41 /Controller/LCD_D1)
(net 42 /Controller/FRONTEND_TEMP)
(net 43 /OUT0)
(net 44 /OUT3)
(net 45 /OUT2)
(net 46 /OUT1)
(net 47 /Controller/VDDA)
(net 48 +5VL)
(net 49 /Controller/CARD_DETECT)
(net 50 "Net-(C102-Pad2)")
(net 51 "Net-(C306-Pad1)")
(net 52 "Net-(C313-Pad1)")
(net 53 "Net-(D101-Pad4)")
(net 54 "Net-(D101-Pad2)")
(net 55 "Net-(D103-Pad1)")
(net 56 "Net-(F102-Pad2)")
(net 57 "Net-(J103-Pad1)")
(net 58 "Net-(Q101-Pad1)")
(net 59 +3.3VA)
(net 60 /Controller/NSS)
(net 61 /Controller/SCK)
(net 62 /Controller/MISO)
(net 63 "Net-(C206-Pad1)")
(net 64 "Net-(C207-Pad1)")
(net 65 "Net-(C211-Pad1)")
(net 66 "Net-(C212-Pad2)")
(net 67 "Net-(C213-Pad1)")
(net 68 "Net-(C303-Pad1)")
(net 69 "Net-(C304-Pad2)")
(net 70 "Net-(C304-Pad1)")
(net 71 "Net-(C305-Pad2)")
(net 72 "Net-(C305-Pad1)")
(net 73 "Net-(C308-Pad2)")
(net 74 "Net-(C308-Pad1)")
(net 75 "Net-(J202-Pad5)")
(net 76 "Net-(J202-Pad6)")
(net 77 "Net-(J202-Pad8)")
(net 78 "Net-(R311-Pad1)")
(net 79 "Net-(R314-Pad2)")
(net 80 "Net-(U201-Pad2)")
(net 81 "Net-(U201-Pad4)")
(net 82 "Net-(U201-Pad6)")
(net 83 "Net-(U201-Pad7)")
(net 84 "Net-(U201-Pad8)")
(net 85 "Net-(U201-Pad9)")
(net 86 "Net-(U201-Pad15)")
(net 87 "Net-(U201-Pad17)")
(net 88 "Net-(U202-Pad2)")
(net 89 "Net-(U202-Pad3)")
(net 90 "Net-(U202-Pad4)")
(net 91 "Net-(U202-Pad5)")
(net 92 "Net-(U202-Pad7)")
(net 93 "Net-(U202-Pad8)")
(net 94 "Net-(U202-Pad9)")
(net 95 "Net-(U202-Pad15)")
(net 96 "Net-(U202-Pad16)")
(net 97 "Net-(U202-Pad17)")
(net 98 "Net-(U202-Pad18)")
(net 99 "Net-(U202-Pad26)")
(net 100 "Net-(U202-Pad29)")
(net 101 "Net-(U202-Pad32)")
(net 102 "Net-(U202-Pad33)")
(net 103 "Net-(U202-Pad34)")
(net 104 "Net-(U202-Pad38)")
(net 105 "Net-(U202-Pad39)")
(net 106 "Net-(U202-Pad40)")
(net 107 "Net-(U202-Pad41)")
(net 108 "Net-(U202-Pad42)")
(net 109 "Net-(U202-Pad43)")
(net 110 "Net-(U202-Pad44)")
(net 111 "Net-(U202-Pad45)")
(net 112 "Net-(U202-Pad46)")
(net 113 "Net-(U202-Pad51)")
(net 114 "Net-(U202-Pad52)")
(net 115 "Net-(U202-Pad53)")
(net 116 "Net-(U202-Pad54)")
(net 117 "Net-(U202-Pad59)")
(net 118 "Net-(U202-Pad60)")
(net 119 "Net-(U202-Pad61)")
(net 120 "Net-(U202-Pad62)")
(net 121 "Net-(U202-Pad63)")
(net 122 "Net-(U202-Pad64)")
(net 123 "Net-(U202-Pad70)")
(net 124 "Net-(U202-Pad71)")
(net 125 "Net-(U202-Pad77)")
(net 126 "Net-(U202-Pad81)")
(net 127 "Net-(U202-Pad82)")
(net 128 "Net-(U202-Pad84)")
(net 129 "Net-(U202-Pad86)")
(net 130 "Net-(U202-Pad95)")
(net 131 "Net-(U202-Pad96)")
(net 132 "Net-(U202-Pad97)")
(net 133 "Net-(U202-Pad98)")
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(net_class Default "This is the default net class."
(clearance 0.2)
(trace_width 0.25)
(via_dia 0.5)
(via_drill 0.3)
(uvia_dia 0.3)
(uvia_drill 0.1)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(diff_pair_width 0.21)
(diff_pair_gap 0.25)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(add_net +3.3VA)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net +3V3)
(add_net +5V)
Improved layout, Add QR code, Add external ADC option for 22 bit ADC
2019-12-26 18:01:55 +01:00
(add_net +5VL)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net +8V)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(add_net /Controller/CARD_DETECT)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net /Controller/ENC1)
(add_net /Controller/ENC2)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(add_net /Controller/FRONTEND_TEMP)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net /Controller/LCD_D0)
(add_net /Controller/LCD_D1)
(add_net /Controller/LCD_D2)
(add_net /Controller/LCD_D3)
(add_net /Controller/LCD_EN)
(add_net /Controller/LCD_RS)
(add_net /Controller/LCD_VO)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(add_net /Controller/MISO)
(add_net /Controller/NSS)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net /Controller/PC_RX)
(add_net /Controller/PC_TX)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(add_net /Controller/SCK)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net /Controller/SDIO_CLK)
(add_net /Controller/SDIO_CMD)
(add_net /Controller/SDIO_D0)
(add_net /Controller/SDIO_D1)
(add_net /Controller/SDIO_D2)
(add_net /Controller/SDIO_D3)
(add_net /Controller/SW1)
(add_net /Controller/SWCLK)
(add_net /Controller/SWDIO)
(add_net /Controller/TEMP_IN)
Schematic beautify and layout improvments, Length matching for SDIO
2019-12-25 19:15:32 +01:00
(add_net /Controller/VDDA)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net /Controller/VREF)
(add_net /Controller/~RST)
(add_net /DIGIO0)
(add_net /DIGIO1)
(add_net /DIGIO2)
(add_net /DIGIO3)
(add_net /Frontend/FORCE+)
(add_net /Frontend/FORCE-)
(add_net /Frontend/SENS+)
(add_net /Frontend/SENS-)
Schematic beautify and layout improvments, Length matching for SDIO
2019-12-25 19:15:32 +01:00
(add_net /OUT0)
(add_net /OUT1)
(add_net /OUT2)
(add_net /OUT3)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net Earth)
(add_net GND)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(add_net "Net-(C102-Pad2)")
Re-annotate components
2020-02-05 18:58:36 +01:00
(add_net "Net-(C206-Pad1)")
(add_net "Net-(C207-Pad1)")
(add_net "Net-(C211-Pad1)")
(add_net "Net-(C212-Pad2)")
(add_net "Net-(C213-Pad1)")
(add_net "Net-(C303-Pad1)")
(add_net "Net-(C304-Pad1)")
(add_net "Net-(C304-Pad2)")
(add_net "Net-(C305-Pad1)")
(add_net "Net-(C305-Pad2)")
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(add_net "Net-(C306-Pad1)")
Re-annotate components
2020-02-05 18:58:36 +01:00
(add_net "Net-(C308-Pad1)")
(add_net "Net-(C308-Pad2)")
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(add_net "Net-(C313-Pad1)")
(add_net "Net-(D101-Pad2)")
(add_net "Net-(D101-Pad4)")
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net "Net-(D102-Pad1)")
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(add_net "Net-(D103-Pad1)")
(add_net "Net-(F102-Pad2)")
(add_net "Net-(J103-Pad1)")
Re-annotate components
2020-02-05 18:58:36 +01:00
(add_net "Net-(J202-Pad5)")
(add_net "Net-(J202-Pad6)")
(add_net "Net-(J202-Pad8)")
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net "Net-(LS101-Pad1)")
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(add_net "Net-(Q101-Pad1)")
Re-annotate components
2020-02-05 18:58:36 +01:00
(add_net "Net-(R311-Pad1)")
(add_net "Net-(R314-Pad2)")
(add_net "Net-(U201-Pad15)")
(add_net "Net-(U201-Pad17)")
(add_net "Net-(U201-Pad2)")
(add_net "Net-(U201-Pad4)")
(add_net "Net-(U201-Pad6)")
(add_net "Net-(U201-Pad7)")
(add_net "Net-(U201-Pad8)")
(add_net "Net-(U201-Pad9)")
(add_net "Net-(U202-Pad15)")
(add_net "Net-(U202-Pad16)")
(add_net "Net-(U202-Pad17)")
(add_net "Net-(U202-Pad18)")
(add_net "Net-(U202-Pad2)")
(add_net "Net-(U202-Pad26)")
(add_net "Net-(U202-Pad29)")
(add_net "Net-(U202-Pad3)")
(add_net "Net-(U202-Pad32)")
(add_net "Net-(U202-Pad33)")
(add_net "Net-(U202-Pad34)")
(add_net "Net-(U202-Pad38)")
(add_net "Net-(U202-Pad39)")
(add_net "Net-(U202-Pad4)")
(add_net "Net-(U202-Pad40)")
(add_net "Net-(U202-Pad41)")
(add_net "Net-(U202-Pad42)")
(add_net "Net-(U202-Pad43)")
(add_net "Net-(U202-Pad44)")
(add_net "Net-(U202-Pad45)")
(add_net "Net-(U202-Pad46)")
(add_net "Net-(U202-Pad5)")
(add_net "Net-(U202-Pad51)")
(add_net "Net-(U202-Pad52)")
(add_net "Net-(U202-Pad53)")
(add_net "Net-(U202-Pad54)")
(add_net "Net-(U202-Pad59)")
(add_net "Net-(U202-Pad60)")
(add_net "Net-(U202-Pad61)")
(add_net "Net-(U202-Pad62)")
(add_net "Net-(U202-Pad63)")
(add_net "Net-(U202-Pad64)")
(add_net "Net-(U202-Pad7)")
(add_net "Net-(U202-Pad70)")
(add_net "Net-(U202-Pad71)")
(add_net "Net-(U202-Pad77)")
(add_net "Net-(U202-Pad8)")
(add_net "Net-(U202-Pad81)")
(add_net "Net-(U202-Pad82)")
(add_net "Net-(U202-Pad84)")
(add_net "Net-(U202-Pad86)")
(add_net "Net-(U202-Pad9)")
(add_net "Net-(U202-Pad95)")
(add_net "Net-(U202-Pad96)")
(add_net "Net-(U202-Pad97)")
(add_net "Net-(U202-Pad98)")
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
)
(net_class HV ""
Finalize version v1.0
2020-01-03 21:26:29 +01:00
(clearance 2.55)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(trace_width 1)
(via_dia 0.5)
(via_drill 0.3)
(uvia_dia 0.3)
(uvia_drill 0.1)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(diff_pair_width 0.21)
(diff_pair_gap 0.25)
(add_net /L_IN)
(add_net /L_Trafo)
(add_net /N_IN)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
)
Re-annotate components
2020-02-05 18:58:36 +01:00
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E3B1D87)
(at 59.75 109.5 180)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5E82B184)
(attr smd)
(fp_text reference C314 (at 0 -1.43) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 2u2 (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 52 "Net-(C313-Pad1)"))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E3CFE8D)
(at 70.75 81.5)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5E80AF62)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C112 (at 0 -1.43) (layer F.SilkS)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 59 +3.3VA))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm (layer F.Cu) (tedit 5A64803D) (tstamp 5E3C2274)
(at 50.75 50.75 180)
(descr "SMD Solder Jumper, 1x1.5mm Triangular Pads, 0.3mm gap, open")
(tags "solder jumper open")
(path /5D77EC9D/5E7247D0)
(attr virtual)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference JP201 (at 0.725 -1.775) (layer F.SilkS)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value LCD_5V_3V3 (at 0.725 1.925) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 3 1.25) (end -2.98 1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 3 1.25) (end 3 -1.27) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.98 -1.27) (end -2.98 1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.98 -1.27) (end 3 -1.27) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.75 -1) (end 2.75 -1) (layer F.SilkS) (width 0.12))
(fp_line (start 2.75 -1) (end 2.75 0.95) (layer F.SilkS) (width 0.12))
(fp_line (start 2.75 0.95) (end -2.75 0.95) (layer F.SilkS) (width 0.12))
(fp_line (start -2.75 0.95) (end -2.75 -1) (layer F.SilkS) (width 0.12))
(fp_line (start -1.4 1.2) (end -1.7 1.5) (layer F.SilkS) (width 0.12))
(fp_line (start -1.7 1.5) (end -1.1 1.5) (layer F.SilkS) (width 0.12))
(fp_line (start -1.1 1.5) (end -1.4 1.2) (layer F.SilkS) (width 0.12))
(pad 3 smd custom (at 2 0) (size 0.3 0.3) (layers F.Cu F.Mask)
(net 4 +3V3) (zone_connect 2)
(options (clearance outline) (anchor rect))
(primitives
(gr_poly (pts
(xy -0.5 -0.75) (xy 0.5 -0.75) (xy 1 0) (xy 0.5 0.75) (xy -0.5 0.75)
) (width 0))
))
(pad 2 smd custom (at 0 0 180) (size 0.3 0.3) (layers F.Cu)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 66 "Net-(C212-Pad2)") (zone_connect 2)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(options (clearance outline) (anchor rect))
(primitives
(gr_poly (pts
(xy -1.2 -0.75) (xy 1.2 -0.75) (xy 0.7 0) (xy 1.2 0.75) (xy -1.2 0.75)
(xy -0.7 0)) (width 0))
))
(pad 1 smd custom (at -2 0 180) (size 0.3 0.3) (layers F.Cu F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 48 +5VL) (zone_connect 2)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(options (clearance outline) (anchor rect))
(primitives
(gr_poly (pts
(xy -0.5 -0.75) (xy 0.5 -0.75) (xy 1 0) (xy 0.5 0.75) (xy -0.5 0.75)
) (width 0))
))
(pad "" smd rect (at -1.2 0 180) (size 1.5 1.5) (layers F.Mask))
(pad "" smd rect (at 1.2 0 180) (size 1.5 1.5) (layers F.Mask))
)
(module Package_TO_SOT_SMD:SOT-23 (layer B.Cu) (tedit 5A02FF57) (tstamp 5E3BF097)
(at 75.5 80 270)
(descr "SOT-23, Standard")
(tags SOT-23)
(path /5D8C5188/5E5592F3)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference U303 (at 0 2.5 270) (layer B.SilkS)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value TL431LI-DBZ (at 0 -2.5 270) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start 0.76 -1.58) (end -0.7 -1.58) (layer B.SilkS) (width 0.12))
(fp_line (start 0.76 1.58) (end -1.4 1.58) (layer B.SilkS) (width 0.12))
(fp_line (start -1.7 -1.75) (end -1.7 1.75) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.7 -1.75) (end -1.7 -1.75) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.7 1.75) (end 1.7 -1.75) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.7 1.75) (end 1.7 1.75) (layer B.CrtYd) (width 0.05))
(fp_line (start 0.76 1.58) (end 0.76 0.65) (layer B.SilkS) (width 0.12))
(fp_line (start 0.76 -1.58) (end 0.76 -0.65) (layer B.SilkS) (width 0.12))
(fp_line (start -0.7 -1.52) (end 0.7 -1.52) (layer B.Fab) (width 0.1))
(fp_line (start 0.7 1.52) (end 0.7 -1.52) (layer B.Fab) (width 0.1))
(fp_line (start -0.7 0.95) (end -0.15 1.52) (layer B.Fab) (width 0.1))
(fp_line (start -0.15 1.52) (end 0.7 1.52) (layer B.Fab) (width 0.1))
(fp_line (start -0.7 0.95) (end -0.7 -1.5) (layer B.Fab) (width 0.1))
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.5 0.5) (thickness 0.075)) (justify mirror))
)
(pad 3 smd rect (at 1 0 270) (size 0.9 0.8) (layers B.Cu B.Paste B.Mask)
(net 2 GND))
(pad 2 smd rect (at -1 -0.95 270) (size 0.9 0.8) (layers B.Cu B.Paste B.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 68 "Net-(C303-Pad1)"))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(pad 1 smd rect (at -1 0.95 270) (size 0.9 0.8) (layers B.Cu B.Paste B.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 68 "Net-(C303-Pad1)"))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Package_TO_SOT_SMD:SOT-223-3_TabPin2 (layer F.Cu) (tedit 5A02FF57) (tstamp 5E3BF082)
(at 72.75 76.25 270)
(descr "module CMS SOT223 4 pins")
(tags "CMS SOT")
(path /5E3EDECA)
(attr smd)
(fp_text reference U105 (at 0 -4.5 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value AP1117-33 (at 0 4.5 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.85 -3.35) (end 1.85 3.35) (layer F.Fab) (width 0.1))
(fp_line (start -1.85 3.35) (end 1.85 3.35) (layer F.Fab) (width 0.1))
(fp_line (start -4.1 -3.41) (end 1.91 -3.41) (layer F.SilkS) (width 0.12))
(fp_line (start -0.85 -3.35) (end 1.85 -3.35) (layer F.Fab) (width 0.1))
(fp_line (start -1.85 3.41) (end 1.91 3.41) (layer F.SilkS) (width 0.12))
(fp_line (start -1.85 -2.35) (end -1.85 3.35) (layer F.Fab) (width 0.1))
(fp_line (start -1.85 -2.35) (end -0.85 -3.35) (layer F.Fab) (width 0.1))
(fp_line (start -4.4 -3.6) (end -4.4 3.6) (layer F.CrtYd) (width 0.05))
(fp_line (start -4.4 3.6) (end 4.4 3.6) (layer F.CrtYd) (width 0.05))
(fp_line (start 4.4 3.6) (end 4.4 -3.6) (layer F.CrtYd) (width 0.05))
(fp_line (start 4.4 -3.6) (end -4.4 -3.6) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.91 -3.41) (end 1.91 -2.15) (layer F.SilkS) (width 0.12))
(fp_line (start 1.91 3.41) (end 1.91 2.15) (layer F.SilkS) (width 0.12))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.8 0.8) (thickness 0.12)))
)
(pad 1 smd rect (at -3.15 -2.3 270) (size 2 1.5) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad 3 smd rect (at -3.15 2.3 270) (size 2 1.5) (layers F.Cu F.Paste F.Mask)
(net 5 +5V))
(pad 2 smd rect (at -3.15 0 270) (size 2 1.5) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 59 +3.3VA))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(pad 2 smd rect (at 3.15 0 270) (size 2 3.8) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 59 +3.3VA))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-223.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3BECA8)
(at 59.75 106.5 180)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E696A10)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R315 (at 0 -1.43) (layer F.SilkS)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 0 (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 21 /Controller/TEMP_IN))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 79 "Net-(R314-Pad2)"))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3BEC97)
(at 72.25 101 270)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E6BEB7A)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R311 (at 0 -1.43 90) (layer F.SilkS)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value DNP (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 73 "Net-(C308-Pad2)"))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 78 "Net-(R311-Pad1)"))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3BEC86)
(at 63 88 90)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E5C0B2B)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R318 (at 0 -1.43 90) (layer F.SilkS)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 2M (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 12 /Frontend/SENS+))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 13 /Frontend/SENS-))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E3BE19D)
(at 73.75 101 270)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5E6BF72D)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C308 (at 0 -1.43 90) (layer F.SilkS)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value DNP (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 73 "Net-(C308-Pad2)"))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 74 "Net-(C308-Pad1)"))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E3BE0CC)
(at 64.5 88 90)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5E656F7C)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C315 (at 0 -1.43 90) (layer F.SilkS)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 22n (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 12 /Frontend/SENS+))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 13 /Frontend/SENS-))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_1210_3225Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E3BE0BB)
(at 83 83.65 270)
(descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5E55CA76)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C303 (at 0 -2.28 90) (layer F.SilkS)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10u (at 0 2.28 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.8 0.8) (thickness 0.12)))
)
(fp_line (start 2.28 1.58) (end -2.28 1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 -1.58) (end 2.28 1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 -1.58) (end 2.28 -1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 1.58) (end -2.28 -1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.602064 1.36) (end 0.602064 1.36) (layer F.SilkS) (width 0.12))
(fp_line (start -0.602064 -1.36) (end 0.602064 -1.36) (layer F.SilkS) (width 0.12))
(fp_line (start 1.6 1.25) (end -1.6 1.25) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 -1.25) (end 1.6 1.25) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 -1.25) (end 1.6 -1.25) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 1.25) (end -1.6 -1.25) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 1.4 0 270) (size 1.25 2.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 2 GND))
(pad 1 smd roundrect (at -1.4 0 270) (size 1.25 2.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 68 "Net-(C303-Pad1)"))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5E2E0EA8)
(at 54.75 98.5 90)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5E34D726)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R214 (at 0 1.43 90) (layer B.SilkS)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value DNP (at 0 -1.43 90) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text user %R (at 0 0 90) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 8 /Controller/VREF))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(module Package_TO_SOT_SMD:SOT-353_SC-70-5 (layer F.Cu) (tedit 5A02FF57) (tstamp 5E1B24D9)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(at 73 104.25 270)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(descr "SOT-353, SC-70-5")
(tags "SOT-353 SC-70-5")
(path /5D8C5188/5E2E5D52)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference U305 (at 2 0.25 180) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value MCP6V31U (at 0 2 270) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.175 -1.1) (end -0.675 -0.6) (layer F.Fab) (width 0.1))
(fp_line (start 0.675 1.1) (end -0.675 1.1) (layer F.Fab) (width 0.1))
(fp_line (start 0.675 -1.1) (end 0.675 1.1) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 1.4) (end 1.6 1.4) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.675 -0.6) (end -0.675 1.1) (layer F.Fab) (width 0.1))
(fp_line (start 0.675 -1.1) (end -0.175 -1.1) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 -1.4) (end 1.6 -1.4) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.6 -1.4) (end -1.6 1.4) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.6 1.4) (end 1.6 -1.4) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.7 1.16) (end 0.7 1.16) (layer F.SilkS) (width 0.12))
(fp_line (start 0.7 -1.16) (end -1.2 -1.16) (layer F.SilkS) (width 0.12))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.075)))
)
(pad 5 smd rect (at 0.95 -0.65 270) (size 0.65 0.4) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 59 +3.3VA))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(pad 4 smd rect (at 0.95 0.65 270) (size 0.65 0.4) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 79 "Net-(R314-Pad2)"))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(pad 2 smd rect (at -0.95 0 270) (size 0.65 0.4) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad 3 smd rect (at -0.95 0.65 270) (size 0.65 0.4) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 78 "Net-(R311-Pad1)"))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(pad 1 smd rect (at -0.95 -0.65 270) (size 0.65 0.4) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 74 "Net-(C308-Pad1)"))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-353_SC-70-5.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Package_TO_SOT_SMD:SOT-353_SC-70-5 (layer F.Cu) (tedit 5A02FF57) (tstamp 5E1B3200)
(at 76.5 96.25 270)
(descr "SOT-353, SC-70-5")
(tags "SOT-353 SC-70-5")
(path /5D8C5188/5E224826)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference U302 (at 0 -6.25 90) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value MCP6V31U (at 0 2 270) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.175 -1.1) (end -0.675 -0.6) (layer F.Fab) (width 0.1))
(fp_line (start 0.675 1.1) (end -0.675 1.1) (layer F.Fab) (width 0.1))
(fp_line (start 0.675 -1.1) (end 0.675 1.1) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 1.4) (end 1.6 1.4) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.675 -0.6) (end -0.675 1.1) (layer F.Fab) (width 0.1))
(fp_line (start 0.675 -1.1) (end -0.175 -1.1) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 -1.4) (end 1.6 -1.4) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.6 -1.4) (end -1.6 1.4) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.6 1.4) (end 1.6 -1.4) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.7 1.16) (end 0.7 1.16) (layer F.SilkS) (width 0.12))
(fp_line (start 0.7 -1.16) (end -1.2 -1.16) (layer F.SilkS) (width 0.12))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.075)))
)
(pad 5 smd rect (at 0.95 -0.65 270) (size 0.65 0.4) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 59 +3.3VA))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(pad 4 smd rect (at 0.95 0.65 270) (size 0.65 0.4) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 72 "Net-(C305-Pad1)"))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(pad 2 smd rect (at -0.95 0 270) (size 0.65 0.4) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad 3 smd rect (at -0.95 0.65 270) (size 0.65 0.4) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 71 "Net-(C305-Pad2)"))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(pad 1 smd rect (at -0.95 -0.65 270) (size 0.65 0.4) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 12 /Frontend/SENS+))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-353_SC-70-5.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Package_TO_SOT_SMD:SOT-353_SC-70-5 (layer F.Cu) (tedit 5A02FF57) (tstamp 5DEF190C)
(at 76 86 270)
(descr "SOT-353, SC-70-5")
(tags "SOT-353 SC-70-5")
(path /5D8C5188/5D8C684C)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference U304 (at 0 -2 90) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value MCP6V31U (at 0 2 270) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.175 -1.1) (end -0.675 -0.6) (layer F.Fab) (width 0.1))
(fp_line (start 0.675 1.1) (end -0.675 1.1) (layer F.Fab) (width 0.1))
(fp_line (start 0.675 -1.1) (end 0.675 1.1) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 1.4) (end 1.6 1.4) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.675 -0.6) (end -0.675 1.1) (layer F.Fab) (width 0.1))
(fp_line (start 0.675 -1.1) (end -0.175 -1.1) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 -1.4) (end 1.6 -1.4) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.6 -1.4) (end -1.6 1.4) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.6 1.4) (end 1.6 -1.4) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.7 1.16) (end 0.7 1.16) (layer F.SilkS) (width 0.12))
(fp_line (start 0.7 -1.16) (end -1.2 -1.16) (layer F.SilkS) (width 0.12))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.075)))
)
(pad 5 smd rect (at 0.95 -0.65 270) (size 0.65 0.4) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 59 +3.3VA))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(pad 4 smd rect (at 0.95 0.65 270) (size 0.65 0.4) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 10 /Frontend/FORCE+))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(pad 2 smd rect (at -0.95 0 270) (size 0.65 0.4) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad 3 smd rect (at -0.95 0.65 270) (size 0.65 0.4) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 11 /Frontend/FORCE-))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(pad 1 smd rect (at -0.95 -0.65 270) (size 0.65 0.4) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 51 "Net-(C306-Pad1)"))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-353_SC-70-5.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Package_TO_SOT_SMD:SOT-353_SC-70-5 (layer F.Cu) (tedit 5A02FF57) (tstamp 5E1B28DB)
(at 70.5 92.75 270)
(descr "SOT-353, SC-70-5")
(tags "SOT-353 SC-70-5")
(path /5D8C5188/5E292BB7)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference U301 (at -2.5 -3 180) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value MCP6V31U (at 0 2 270) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.175 -1.1) (end -0.675 -0.6) (layer F.Fab) (width 0.1))
(fp_line (start 0.675 1.1) (end -0.675 1.1) (layer F.Fab) (width 0.1))
(fp_line (start 0.675 -1.1) (end 0.675 1.1) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 1.4) (end 1.6 1.4) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.675 -0.6) (end -0.675 1.1) (layer F.Fab) (width 0.1))
(fp_line (start 0.675 -1.1) (end -0.175 -1.1) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 -1.4) (end 1.6 -1.4) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.6 -1.4) (end -1.6 1.4) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.6 1.4) (end 1.6 -1.4) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.7 1.16) (end 0.7 1.16) (layer F.SilkS) (width 0.12))
(fp_line (start 0.7 -1.16) (end -1.2 -1.16) (layer F.SilkS) (width 0.12))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.075)))
)
(pad 5 smd rect (at 0.95 -0.65 270) (size 0.65 0.4) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 59 +3.3VA))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(pad 4 smd rect (at 0.95 0.65 270) (size 0.65 0.4) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 70 "Net-(C304-Pad1)"))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(pad 2 smd rect (at -0.95 0 270) (size 0.65 0.4) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad 3 smd rect (at -0.95 0.65 270) (size 0.65 0.4) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 69 "Net-(C304-Pad2)"))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(pad 1 smd rect (at -0.95 -0.65 270) (size 0.65 0.4) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 13 /Frontend/SENS-))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-353_SC-70-5.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E1B20F2)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(at 70.5 104.25 270)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E3A5DAA)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R314 (at 0 1.75 90) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value "5k 0.1%" (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 79 "Net-(R314-Pad2)"))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 78 "Net-(R311-Pad1)"))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E1B20E1)
(at 71 97.75 270)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E381FD9)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R312 (at 0.75 2.5 180) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value "1k 0.1%" (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 78 "Net-(R311-Pad1)"))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 70 "Net-(C304-Pad1)"))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E1B20D0)
(at 76.75 98.75 180)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E352DB6)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R309 (at -7.5 -0.25) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value "5k 0.1%" (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 74 "Net-(C308-Pad1)"))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E1B20BF)
(at 73.5 98.5 180)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E333B2A)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R307 (at -6.75 -0.5) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value "1k 0.1%" (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 72 "Net-(C305-Pad1)"))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 74 "Net-(C308-Pad1)"))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E1B20AE)
(at 74.25 96.25 90)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E255618)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R305 (at 0 7 90) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value "1k 0.1%" (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 71 "Net-(C305-Pad2)"))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 72 "Net-(C305-Pad1)"))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E1B209D)
(at 68.75 97 180)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E292BD1)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R304 (at 4.25 -1.25) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value "1k 0.1%" (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 69 "Net-(C304-Pad2)"))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 70 "Net-(C304-Pad1)"))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E1B208C)
(at 76.5 93.5)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E25723A)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R302 (at 0 -1.43) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value "1k 0.1%" (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 71 "Net-(C305-Pad2)"))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E1B1F5B)
(at 68 93 90)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E292BD7)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R301 (at 0 -1.25 90) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value "1k 0.1%" (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 69 "Net-(C304-Pad2)"))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E1B1548)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(at 75.25 104.25 270)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5E2E5D32)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C310 (at -0.5 -3 180) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 59 +3.3VA))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E1B1537)
(at 72.75 96.25 90)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5E232923)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C305 (at 0 7.25 270) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 71 "Net-(C305-Pad2)"))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 72 "Net-(C305-Pad1)"))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E1B1526)
(at 68.75 95.5 180)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5E292BC1)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C304 (at 4.25 -1.5) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 69 "Net-(C304-Pad2)"))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 70 "Net-(C304-Pad1)"))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E1B1515)
(at 72.75 92.75 270)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5E292BA1)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C301 (at 0 -1.43 90) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 59 +3.3VA))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E1B91BA)
(at 78.75 96.25 270)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5DA18039)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C302 (at 0 -5.25 90) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 59 +3.3VA))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(module Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm (layer F.Cu) (tedit 5A64794F) (tstamp 5E102D21)
(at 30 18 270)
(descr "SMD Solder Jumper, 1x1.5mm Triangular Pads, 0.3mm gap, open")
(tags "solder jumper open")
(path /5E154E5C)
(attr virtual)
(fp_text reference JP104 (at 0 -1.8 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value EarthBridge (at 0 1.9 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.65 1.25) (end -1.65 1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.65 1.25) (end 1.65 -1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.65 -1.25) (end -1.65 1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.65 -1.25) (end 1.65 -1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.4 -1) (end 1.4 -1) (layer F.SilkS) (width 0.12))
(fp_line (start 1.4 -1) (end 1.4 1) (layer F.SilkS) (width 0.12))
(fp_line (start 1.4 1) (end -1.4 1) (layer F.SilkS) (width 0.12))
(fp_line (start -1.4 1) (end -1.4 -1) (layer F.SilkS) (width 0.12))
(pad 1 smd custom (at -0.725 0 270) (size 0.3 0.3) (layers F.Cu F.Mask)
(net 1 Earth) (zone_connect 2)
(options (clearance outline) (anchor rect))
(primitives
(gr_poly (pts
(xy -0.5 -0.75) (xy 0.5 -0.75) (xy 1 0) (xy 0.5 0.75) (xy -0.5 0.75)
) (width 0))
))
(pad 2 smd custom (at 0.725 0 270) (size 0.3 0.3) (layers F.Cu F.Mask)
(net 2 GND) (zone_connect 2)
(options (clearance outline) (anchor rect))
(primitives
(gr_poly (pts
(xy -0.65 -0.75) (xy 0.5 -0.75) (xy 0.5 0.75) (xy -0.65 0.75) (xy -0.15 0)
) (width 0))
))
)
(module Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm (layer F.Cu) (tedit 5A64794F) (tstamp 5E102D13)
(at 53 18 270)
(descr "SMD Solder Jumper, 1x1.5mm Triangular Pads, 0.3mm gap, open")
(tags "solder jumper open")
(path /5E154646)
(attr virtual)
(fp_text reference JP103 (at 0 -1.8 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value EarthBridge (at 0 1.9 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.65 1.25) (end -1.65 1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.65 1.25) (end 1.65 -1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.65 -1.25) (end -1.65 1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.65 -1.25) (end 1.65 -1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.4 -1) (end 1.4 -1) (layer F.SilkS) (width 0.12))
(fp_line (start 1.4 -1) (end 1.4 1) (layer F.SilkS) (width 0.12))
(fp_line (start 1.4 1) (end -1.4 1) (layer F.SilkS) (width 0.12))
(fp_line (start -1.4 1) (end -1.4 -1) (layer F.SilkS) (width 0.12))
(pad 1 smd custom (at -0.725 0 270) (size 0.3 0.3) (layers F.Cu F.Mask)
(net 1 Earth) (zone_connect 2)
(options (clearance outline) (anchor rect))
(primitives
(gr_poly (pts
(xy -0.5 -0.75) (xy 0.5 -0.75) (xy 1 0) (xy 0.5 0.75) (xy -0.5 0.75)
) (width 0))
))
(pad 2 smd custom (at 0.725 0 270) (size 0.3 0.3) (layers F.Cu F.Mask)
(net 2 GND) (zone_connect 2)
(options (clearance outline) (anchor rect))
(primitives
(gr_poly (pts
(xy -0.65 -0.75) (xy 0.5 -0.75) (xy 0.5 0.75) (xy -0.65 0.75) (xy -0.15 0)
) (width 0))
))
)
(module Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm (layer F.Cu) (tedit 5A64794F) (tstamp 5E102D05)
(at 33 110 90)
(descr "SMD Solder Jumper, 1x1.5mm Triangular Pads, 0.3mm gap, open")
(tags "solder jumper open")
(path /5E1491CF)
(attr virtual)
(fp_text reference JP102 (at 0 -1.8 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value EarthBridge (at 0 1.9 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.65 1.25) (end -1.65 1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.65 1.25) (end 1.65 -1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.65 -1.25) (end -1.65 1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.65 -1.25) (end 1.65 -1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.4 -1) (end 1.4 -1) (layer F.SilkS) (width 0.12))
(fp_line (start 1.4 -1) (end 1.4 1) (layer F.SilkS) (width 0.12))
(fp_line (start 1.4 1) (end -1.4 1) (layer F.SilkS) (width 0.12))
(fp_line (start -1.4 1) (end -1.4 -1) (layer F.SilkS) (width 0.12))
(pad 1 smd custom (at -0.725 0 90) (size 0.3 0.3) (layers F.Cu F.Mask)
(net 1 Earth) (zone_connect 2)
(options (clearance outline) (anchor rect))
(primitives
(gr_poly (pts
(xy -0.5 -0.75) (xy 0.5 -0.75) (xy 1 0) (xy 0.5 0.75) (xy -0.5 0.75)
) (width 0))
))
(pad 2 smd custom (at 0.725 0 90) (size 0.3 0.3) (layers F.Cu F.Mask)
(net 2 GND) (zone_connect 2)
(options (clearance outline) (anchor rect))
(primitives
(gr_poly (pts
(xy -0.65 -0.75) (xy 0.5 -0.75) (xy 0.5 0.75) (xy -0.65 0.75) (xy -0.15 0)
) (width 0))
))
)
Finalize version v1.0
2020-01-03 21:26:29 +01:00
(module Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm (layer B.Cu) (tedit 5A64794F) (tstamp 5E102CF7)
(at 95 96 180)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(descr "SMD Solder Jumper, 1x1.5mm Triangular Pads, 0.3mm gap, open")
(tags "solder jumper open")
(path /5E168E1A)
(attr virtual)
Finalize version v1.0
2020-01-03 21:26:29 +01:00
(fp_text reference JP101 (at 0 1.8) (layer B.SilkS)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
)
Finalize version v1.0
2020-01-03 21:26:29 +01:00
(fp_text value EarthBridge (at 0 -1.9) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
)
Finalize version v1.0
2020-01-03 21:26:29 +01:00
(fp_line (start 1.65 -1.25) (end -1.65 -1.25) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.65 -1.25) (end 1.65 1.25) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.65 1.25) (end -1.65 -1.25) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.65 1.25) (end 1.65 1.25) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.4 1) (end 1.4 1) (layer B.SilkS) (width 0.12))
(fp_line (start 1.4 1) (end 1.4 -1) (layer B.SilkS) (width 0.12))
(fp_line (start 1.4 -1) (end -1.4 -1) (layer B.SilkS) (width 0.12))
(fp_line (start -1.4 -1) (end -1.4 1) (layer B.SilkS) (width 0.12))
(pad 1 smd custom (at -0.725 0 180) (size 0.3 0.3) (layers B.Cu B.Mask)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(net 1 Earth) (zone_connect 2)
(options (clearance outline) (anchor rect))
(primitives
(gr_poly (pts
Finalize version v1.0
2020-01-03 21:26:29 +01:00
(xy -0.5 0.75) (xy 0.5 0.75) (xy 1 0) (xy 0.5 -0.75) (xy -0.5 -0.75)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
) (width 0))
))
Finalize version v1.0
2020-01-03 21:26:29 +01:00
(pad 2 smd custom (at 0.725 0 180) (size 0.3 0.3) (layers B.Cu B.Mask)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(net 2 GND) (zone_connect 2)
(options (clearance outline) (anchor rect))
(primitives
(gr_poly (pts
Finalize version v1.0
2020-01-03 21:26:29 +01:00
(xy -0.65 0.75) (xy 0.5 0.75) (xy 0.5 -0.75) (xy -0.65 -0.75) (xy -0.15 0)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
) (width 0))
))
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(module shimatta_smd:MCC-SDMICRO3-112J-TDAR-R01 (layer F.Cu) (tedit 5E0F7980) (tstamp 5DEF124A)
(at 28 67.5 270)
(path /5D77EC9D/5DB776DE)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference CON201 (at 13.5 -2.5 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
Improved layout, Add QR code, Add external ADC option for 22 bit ADC
2019-12-26 18:01:55 +01:00
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(fp_text value Micro_SD (at 7.25 -2.25 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(fp_line (start -0.4 14.5) (end -0.4 13.8) (layer F.Fab) (width 0.12))
(fp_line (start 13.8 1.5) (end 13.8 14.5) (layer F.Fab) (width 0.12))
(fp_line (start 12.4 1.5) (end 13.8 1.5) (layer F.Fab) (width 0.12))
(fp_line (start 12.4 1) (end 12.4 1.5) (layer F.Fab) (width 0.12))
(fp_line (start 13.8 1) (end 12.4 1) (layer F.Fab) (width 0.12))
(fp_line (start 13.8 0) (end 13.8 1) (layer F.Fab) (width 0.12))
(fp_line (start -0.7 0) (end 13.8 0) (layer F.Fab) (width 0.12))
(fp_line (start -0.7 13.8) (end -0.7 0) (layer F.Fab) (width 0.12))
(fp_line (start 7.7 13.8) (end -0.7 13.8) (layer F.Fab) (width 0.12))
(fp_line (start 9.5 14.5) (end 7.7 13.8) (layer F.Fab) (width 0.12))
(fp_line (start 13.8 14.5) (end 9.5 14.5) (layer F.Fab) (width 0.12))
(fp_text user Inserted (at 8.1 16.4 90) (layer F.Fab)
(effects (font (size 0.25 0.25) (thickness 0.05)))
)
(fp_line (start -0.4 15.5) (end -0.4 14.5) (layer F.Fab) (width 0.12))
(fp_line (start 0.8 16.7) (end 9.4 16.7) (layer F.Fab) (width 0.12))
(fp_arc (start 0.8 15.5) (end -0.4 15.5) (angle -90) (layer F.Fab) (width 0.12))
(fp_line (start 10.6 15.5) (end 10.6 14.5) (layer F.Fab) (width 0.12))
(fp_arc (start 9.4 15.5) (end 9.4 16.7) (angle -90) (layer F.Fab) (width 0.12))
(fp_text user Push-in (at 8.1 15.4 90) (layer F.Fab)
(effects (font (size 0.25 0.25) (thickness 0.05)))
)
(fp_line (start 0.8 15.7) (end 9.4 15.7) (layer F.Fab) (width 0.12))
(fp_arc (start 0.8 14.5) (end -0.4 14.5) (angle -90) (layer F.Fab) (width 0.12))
(fp_arc (start 9.4 14.5) (end 9.4 15.7) (angle -90) (layer F.Fab) (width 0.12))
(fp_line (start -2.25 14.5) (end -2.25 -1.5) (layer F.CrtYd) (width 0.15))
(fp_line (start 15.25 14.5) (end -2.25 14.5) (layer F.CrtYd) (width 0.15))
(fp_line (start 15.25 -1.5) (end 15.25 14.5) (layer F.CrtYd) (width 0.15))
(fp_line (start -2.25 -1.5) (end 15.25 -1.5) (layer F.CrtYd) (width 0.15))
(fp_line (start -0.4 2.75) (end -0.4 14.5) (layer F.SilkS) (width 0.15))
(fp_line (start 0.75 2.75) (end -0.4 2.75) (layer F.SilkS) (width 0.15))
(fp_line (start 10 2.75) (end 0.75 2.75) (layer F.SilkS) (width 0.15))
(fp_line (start 10 6.55) (end 10 2.75) (layer F.SilkS) (width 0.15))
(fp_line (start 10.6 7.1) (end 10 6.55) (layer F.SilkS) (width 0.15))
(fp_line (start 10.6 8.1) (end 10.6 7.1) (layer F.SilkS) (width 0.15))
(fp_line (start 10 8.55) (end 10.6 8.1) (layer F.SilkS) (width 0.15))
(fp_line (start 10.6 8.9) (end 10 8.55) (layer F.SilkS) (width 0.15))
(fp_line (start 10.6 14.5) (end 10.6 8.9) (layer F.SilkS) (width 0.15))
(fp_line (start -0.4 14.5) (end 10.6 14.5) (layer F.SilkS) (width 0.15))
(fp_line (start -2.25 14.5) (end -2.25 11.25) (layer F.SilkS) (width 0.15))
(fp_line (start 15.25 -1.5) (end 15.25 14.5) (layer F.SilkS) (width 0.15))
(fp_line (start -2.25 -1.5) (end 15.25 -1.5) (layer F.SilkS) (width 0.15))
(fp_line (start -2.25 -1.25) (end -2.25 -1.5) (layer F.SilkS) (width 0.15))
(fp_line (start -2.25 11.25) (end -2.25 -1.25) (layer F.SilkS) (width 0.15))
(fp_line (start 9.6 4) (end 9.6 6) (layer F.CrtYd) (width 0.15))
(fp_line (start 0.6 4) (end 9.6 4) (layer F.CrtYd) (width 0.15))
(fp_line (start 0.6 6) (end 0.6 4) (layer F.CrtYd) (width 0.15))
(fp_line (start 9.6 6) (end 0.6 6) (layer F.CrtYd) (width 0.15))
(pad 11 smd rect (at 14.3 10.1 270) (size 1.2 2.2) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad "" np_thru_hole circle (at 9.6 10.5 270) (size 1 1) (drill 1) (layers *.Cu *.Mask))
(pad "" np_thru_hole circle (at 1.6 10.5 270) (size 1 1) (drill 1) (layers *.Cu *.Mask))
(pad 12 smd rect (at -1.2 10.1 270) (size 1.2 2.2) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad 13 smd rect (at -1.2 0.5 270) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad 10 smd rect (at 13.4 0.5 270) (size 1.6 1.4) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad 1 smd rect (at 8.8 0 270) (size 0.7 1.6) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 19 /Controller/SDIO_D2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd rect (at 7.7 0 270) (size 0.7 1.6) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 18 /Controller/SDIO_D3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 smd rect (at 6.6 0 270) (size 0.7 1.6) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 17 /Controller/SDIO_CMD))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 4 smd rect (at 5.5 0 270) (size 0.7 1.6) (layers F.Cu F.Paste F.Mask)
(net 4 +3V3))
(pad 5 smd rect (at 4.4 0 270) (size 0.7 1.6) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 16 /Controller/SDIO_CLK))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 6 smd rect (at 3.3 0 270) (size 0.7 1.6) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad 7 smd rect (at 2.2 0 270) (size 0.7 1.6) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 15 /Controller/SDIO_D0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 8 smd rect (at 1.1 0 270) (size 0.7 1.6) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 14 /Controller/SDIO_D1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 9 smd rect (at 0 0 270) (size 0.7 1.6) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 49 /Controller/CARD_DETECT))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
(module proz_unknown:1271.1001 (layer F.Cu) (tedit 5C192637) (tstamp 5E0E4506)
(at 21 56 180)
(path /5E220866)
(fp_text reference FID102 (at 0.5 8) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value LightGuide (at 4.1 -2.5) (layer F.Fab) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -1.8 1.2) (end -1.8 -1.2) (layer F.CrtYd) (width 0.12))
(fp_line (start -6 1.2) (end -1.8 1.2) (layer F.CrtYd) (width 0.12))
(fp_line (start -6 -1.2) (end -6 1.2) (layer F.CrtYd) (width 0.12))
(fp_line (start -1.8 -1.2) (end -6 -1.2) (layer F.CrtYd) (width 0.12))
(fp_line (start -1.5 1.5) (end -1.5 -1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start 1.5 -1.5) (end 1.5 1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start -6.3 -1.5) (end -6.3 1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start 8.1 -1.5) (end -6.3 -1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start 8.1 1.5) (end 8.1 -1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start -6.3 1.5) (end 8.1 1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start -2.5 -1.5) (end 2.5 -1.5) (layer F.SilkS) (width 0.15))
(fp_line (start -2.5 1.5) (end 2.5 1.5) (layer F.SilkS) (width 0.15))
(pad "" np_thru_hole circle (at 0 0 180) (size 2.3 2.3) (drill 2.3) (layers *.Cu *.Mask))
)
(module Package_QFP:LQFP-100_14x14mm_P0.5mm (layer F.Cu) (tedit 5C1956D1) (tstamp 5DEF18B5)
(at 48.5 94 90)
(descr "LQFP, 100 Pin (https://www.nxp.com/docs/en/package-information/SOT407-1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py")
(tags "LQFP QFP")
(path /5D77EC9D/5D78060E)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference U202 (at 0 -9.42 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value STM32F407VETx (at 0 9.42 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 6.41 7.11) (end 7.11 7.11) (layer F.SilkS) (width 0.12))
(fp_line (start 7.11 7.11) (end 7.11 6.41) (layer F.SilkS) (width 0.12))
(fp_line (start -6.41 7.11) (end -7.11 7.11) (layer F.SilkS) (width 0.12))
(fp_line (start -7.11 7.11) (end -7.11 6.41) (layer F.SilkS) (width 0.12))
(fp_line (start 6.41 -7.11) (end 7.11 -7.11) (layer F.SilkS) (width 0.12))
(fp_line (start 7.11 -7.11) (end 7.11 -6.41) (layer F.SilkS) (width 0.12))
(fp_line (start -6.41 -7.11) (end -7.11 -7.11) (layer F.SilkS) (width 0.12))
(fp_line (start -7.11 -7.11) (end -7.11 -6.41) (layer F.SilkS) (width 0.12))
(fp_line (start -7.11 -6.41) (end -8.475 -6.41) (layer F.SilkS) (width 0.12))
(fp_line (start -6 -7) (end 7 -7) (layer F.Fab) (width 0.1))
(fp_line (start 7 -7) (end 7 7) (layer F.Fab) (width 0.1))
(fp_line (start 7 7) (end -7 7) (layer F.Fab) (width 0.1))
(fp_line (start -7 7) (end -7 -6) (layer F.Fab) (width 0.1))
(fp_line (start -7 -6) (end -6 -7) (layer F.Fab) (width 0.1))
(fp_line (start 0 -8.72) (end -6.4 -8.72) (layer F.CrtYd) (width 0.05))
(fp_line (start -6.4 -8.72) (end -6.4 -7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -6.4 -7.25) (end -7.25 -7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -7.25 -7.25) (end -7.25 -6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start -7.25 -6.4) (end -8.72 -6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start -8.72 -6.4) (end -8.72 0) (layer F.CrtYd) (width 0.05))
(fp_line (start 0 -8.72) (end 6.4 -8.72) (layer F.CrtYd) (width 0.05))
(fp_line (start 6.4 -8.72) (end 6.4 -7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 6.4 -7.25) (end 7.25 -7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 7.25 -7.25) (end 7.25 -6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start 7.25 -6.4) (end 8.72 -6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start 8.72 -6.4) (end 8.72 0) (layer F.CrtYd) (width 0.05))
(fp_line (start 0 8.72) (end -6.4 8.72) (layer F.CrtYd) (width 0.05))
(fp_line (start -6.4 8.72) (end -6.4 7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -6.4 7.25) (end -7.25 7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -7.25 7.25) (end -7.25 6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start -7.25 6.4) (end -8.72 6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start -8.72 6.4) (end -8.72 0) (layer F.CrtYd) (width 0.05))
(fp_line (start 0 8.72) (end 6.4 8.72) (layer F.CrtYd) (width 0.05))
(fp_line (start 6.4 8.72) (end 6.4 7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 6.4 7.25) (end 7.25 7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 7.25 7.25) (end 7.25 6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start 7.25 6.4) (end 8.72 6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start 8.72 6.4) (end 8.72 0) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 smd roundrect (at -7.675 -6 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 60 /Controller/NSS))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at -7.675 -5.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 88 "Net-(U202-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 smd roundrect (at -7.675 -5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 89 "Net-(U202-Pad3)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 4 smd roundrect (at -7.675 -4.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 90 "Net-(U202-Pad4)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 5 smd roundrect (at -7.675 -4 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 91 "Net-(U202-Pad5)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 6 smd roundrect (at -7.675 -3.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 7 smd roundrect (at -7.675 -3 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 92 "Net-(U202-Pad7)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 8 smd roundrect (at -7.675 -2.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 93 "Net-(U202-Pad8)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 9 smd roundrect (at -7.675 -2 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 94 "Net-(U202-Pad9)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 10 smd roundrect (at -7.675 -1.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 11 smd roundrect (at -7.675 -1 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 12 smd roundrect (at -7.675 -0.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 63 "Net-(C206-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 13 smd roundrect (at -7.675 0 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 64 "Net-(C207-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 14 smd roundrect (at -7.675 0.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 33 /Controller/~RST))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 15 smd roundrect (at -7.675 1 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 95 "Net-(U202-Pad15)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 16 smd roundrect (at -7.675 1.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 96 "Net-(U202-Pad16)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 17 smd roundrect (at -7.675 2 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 97 "Net-(U202-Pad17)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 18 smd roundrect (at -7.675 2.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 98 "Net-(U202-Pad18)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 19 smd roundrect (at -7.675 3 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 20 smd roundrect (at -7.675 3.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 21 smd roundrect (at -7.675 4 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 8 /Controller/VREF))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 22 smd roundrect (at -7.675 4.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 47 /Controller/VDDA))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 23 smd roundrect (at -7.675 5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 6 /Controller/ENC1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 24 smd roundrect (at -7.675 5.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 7 /Controller/ENC2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 25 smd roundrect (at -7.675 6 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 21 /Controller/TEMP_IN))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 26 smd roundrect (at -6 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 99 "Net-(U202-Pad26)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 27 smd roundrect (at -5.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 28 smd roundrect (at -5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 29 smd roundrect (at -4.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 100 "Net-(U202-Pad29)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 30 smd roundrect (at -4 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 61 /Controller/SCK))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 31 smd roundrect (at -3.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 62 /Controller/MISO))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 32 smd roundrect (at -3 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 101 "Net-(U202-Pad32)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 33 smd roundrect (at -2.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 102 "Net-(U202-Pad33)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 34 smd roundrect (at -2 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 103 "Net-(U202-Pad34)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 35 smd roundrect (at -1.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 43 /OUT0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 36 smd roundrect (at -1 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 46 /OUT1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 37 smd roundrect (at -0.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 45 /OUT2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 38 smd roundrect (at 0 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 104 "Net-(U202-Pad38)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 39 smd roundrect (at 0.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 105 "Net-(U202-Pad39)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 40 smd roundrect (at 1 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 106 "Net-(U202-Pad40)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 41 smd roundrect (at 1.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 107 "Net-(U202-Pad41)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 42 smd roundrect (at 2 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 108 "Net-(U202-Pad42)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 43 smd roundrect (at 2.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 109 "Net-(U202-Pad43)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 44 smd roundrect (at 3 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 110 "Net-(U202-Pad44)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 45 smd roundrect (at 3.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 111 "Net-(U202-Pad45)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 46 smd roundrect (at 4 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 112 "Net-(U202-Pad46)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 47 smd roundrect (at 4.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 42 /Controller/FRONTEND_TEMP))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 48 smd roundrect (at 5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 42 /Controller/FRONTEND_TEMP))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 49 smd roundrect (at 5.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 65 "Net-(C211-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 50 smd roundrect (at 6 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 51 smd roundrect (at 7.675 6 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 113 "Net-(U202-Pad51)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 52 smd roundrect (at 7.675 5.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 114 "Net-(U202-Pad52)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 53 smd roundrect (at 7.675 5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 115 "Net-(U202-Pad53)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 54 smd roundrect (at 7.675 4.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 116 "Net-(U202-Pad54)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 55 smd roundrect (at 7.675 4 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 82 "Net-(U201-Pad6)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 56 smd roundrect (at 7.675 3.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 84 "Net-(U201-Pad8)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 57 smd roundrect (at 7.675 3 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 87 "Net-(U201-Pad17)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 58 smd roundrect (at 7.675 2.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 86 "Net-(U201-Pad15)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 59 smd roundrect (at 7.675 2 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 117 "Net-(U202-Pad59)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 60 smd roundrect (at 7.675 1.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 118 "Net-(U202-Pad60)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 61 smd roundrect (at 7.675 1 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 119 "Net-(U202-Pad61)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 62 smd roundrect (at 7.675 0.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 120 "Net-(U202-Pad62)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 63 smd roundrect (at 7.675 0 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 121 "Net-(U202-Pad63)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 64 smd roundrect (at 7.675 -0.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 122 "Net-(U202-Pad64)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 65 smd roundrect (at 7.675 -1 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 15 /Controller/SDIO_D0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 66 smd roundrect (at 7.675 -1.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 14 /Controller/SDIO_D1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 67 smd roundrect (at 7.675 -2 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 49 /Controller/CARD_DETECT))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 68 smd roundrect (at 7.675 -2.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 31 /Controller/PC_RX))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 69 smd roundrect (at 7.675 -3 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 32 /Controller/PC_TX))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 70 smd roundrect (at 7.675 -3.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 123 "Net-(U202-Pad70)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 71 smd roundrect (at 7.675 -4 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 124 "Net-(U202-Pad71)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 72 smd roundrect (at 7.675 -4.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 29 /Controller/SWDIO))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 73 smd roundrect (at 7.675 -5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 67 "Net-(C213-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 74 smd roundrect (at 7.675 -5.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 75 smd roundrect (at 7.675 -6 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 76 smd roundrect (at 6 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 30 /Controller/SWCLK))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 77 smd roundrect (at 5.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 125 "Net-(U202-Pad77)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 78 smd roundrect (at 5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 19 /Controller/SDIO_D2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 79 smd roundrect (at 4.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 18 /Controller/SDIO_D3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 80 smd roundrect (at 4 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 16 /Controller/SDIO_CLK))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 81 smd roundrect (at 3.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 126 "Net-(U202-Pad81)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 82 smd roundrect (at 3 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 127 "Net-(U202-Pad82)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 83 smd roundrect (at 2.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 17 /Controller/SDIO_CMD))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 84 smd roundrect (at 2 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 128 "Net-(U202-Pad84)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 85 smd roundrect (at 1.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 9 /Controller/SW1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 86 smd roundrect (at 1 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 129 "Net-(U202-Pad86)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 87 smd roundrect (at 0.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 80 "Net-(U201-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 88 smd roundrect (at 0 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 81 "Net-(U201-Pad4)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 89 smd roundrect (at -0.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 44 /OUT3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 90 smd roundrect (at -1 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 28 /DIGIO0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 91 smd roundrect (at -1.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 27 /DIGIO1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 92 smd roundrect (at -2 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 26 /DIGIO2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 93 smd roundrect (at -2.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 25 /DIGIO3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 94 smd roundrect (at -3 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 95 smd roundrect (at -3.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 130 "Net-(U202-Pad95)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 96 smd roundrect (at -4 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 131 "Net-(U202-Pad96)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 97 smd roundrect (at -4.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 132 "Net-(U202-Pad97)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 98 smd roundrect (at -5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 133 "Net-(U202-Pad98)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 99 smd roundrect (at -5.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 100 smd roundrect (at -6 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(model ${KISYS3DMOD}/Package_QFP.3dshapes/LQFP-100_14x14mm_P0.5mm.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Connector_Multicomp:Multicomp_MC9A12-1034_2x05_P2.54mm_Vertical (layer F.Cu) (tedit 5E0DF17F) (tstamp 5E016EF0)
(at 62.5 61 180)
(descr http://www.farnell.com/datasheets/1520732.pdf)
(tags "connector multicomp MC9A MC9A12")
(path /5D77EC9D/5E102471)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference J201 (at 5.5 4 180) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value LCD (at 5.08 5 180) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 5.08 -1.27 180) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -5.07 3.2) (end -5.07 -5.74) (layer F.SilkS) (width 0.15))
(fp_line (start -5.07 -5.74) (end 15.23 -5.74) (layer F.SilkS) (width 0.15))
(fp_line (start 15.23 -5.74) (end 15.23 3.2) (layer F.SilkS) (width 0.15))
(fp_line (start 15.23 3.2) (end -5.07 3.2) (layer F.SilkS) (width 0.15))
(fp_line (start 2.855 3.2) (end 2.855 1.9) (layer F.SilkS) (width 0.15))
(fp_line (start 2.855 1.9) (end -3.87 1.9) (layer F.SilkS) (width 0.15))
(fp_line (start -3.87 1.9) (end -3.87 -4.44) (layer F.SilkS) (width 0.15))
(fp_line (start -3.87 -4.44) (end 14.03 -4.44) (layer F.SilkS) (width 0.15))
(fp_line (start 14.03 -4.44) (end 14.03 1.9) (layer F.SilkS) (width 0.15))
(fp_line (start 14.03 1.9) (end 7.305 1.9) (layer F.SilkS) (width 0.15))
(fp_line (start 7.305 1.9) (end 7.305 3.2) (layer F.SilkS) (width 0.15))
(fp_line (start 4.83 -5.74) (end 4.83 -5.94) (layer F.SilkS) (width 0.15))
(fp_line (start 4.83 -5.94) (end 5.33 -5.94) (layer F.SilkS) (width 0.15))
(fp_line (start 5.33 -5.94) (end 5.33 -5.74) (layer F.SilkS) (width 0.15))
(fp_line (start 4.83 -5.84) (end 5.33 -5.84) (layer F.SilkS) (width 0.15))
(fp_line (start 12.31 -5.74) (end 12.31 -5.94) (layer F.SilkS) (width 0.15))
(fp_line (start 12.31 -5.94) (end 12.81 -5.94) (layer F.SilkS) (width 0.15))
(fp_line (start 12.81 -5.94) (end 12.81 -5.74) (layer F.SilkS) (width 0.15))
(fp_line (start 12.31 -5.84) (end 12.81 -5.84) (layer F.SilkS) (width 0.15))
(fp_line (start -2.65 -5.74) (end -2.65 -5.94) (layer F.SilkS) (width 0.15))
(fp_line (start -2.65 -5.94) (end -2.15 -5.94) (layer F.SilkS) (width 0.15))
(fp_line (start -2.15 -5.94) (end -2.15 -5.74) (layer F.SilkS) (width 0.15))
(fp_line (start -2.65 -5.84) (end -2.15 -5.84) (layer F.SilkS) (width 0.15))
(fp_line (start -2.2 0.6) (end -2.2 -0.6) (layer F.SilkS) (width 0.15))
(fp_line (start -2.2 -0.6) (end -1.6 0) (layer F.SilkS) (width 0.15))
(fp_line (start -1.6 0) (end -2.2 0.6) (layer F.SilkS) (width 0.15))
(fp_line (start -5.55 3.7) (end -5.55 -6.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -5.55 -6.25) (end 15.75 -6.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 15.75 -6.25) (end 15.75 3.7) (layer F.CrtYd) (width 0.05))
(fp_line (start 15.75 3.7) (end -5.55 3.7) (layer F.CrtYd) (width 0.05))
(pad 1 thru_hole rect (at 0 0 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(pad 2 thru_hole circle (at 0 -2.54 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(pad 3 thru_hole circle (at 2.54 0 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 66 "Net-(C212-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 4 thru_hole circle (at 2.54 -2.54 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 36 /Controller/LCD_RS))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 5 thru_hole circle (at 5.08 0 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 35 /Controller/LCD_VO))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 6 thru_hole circle (at 5.08 -2.54 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 37 /Controller/LCD_EN))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 7 thru_hole circle (at 7.62 0 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 38 /Controller/LCD_D3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 8 thru_hole circle (at 7.62 -2.54 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 39 /Controller/LCD_D0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 9 thru_hole circle (at 10.16 0 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 40 /Controller/LCD_D2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 10 thru_hole circle (at 10.16 -2.54 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 41 /Controller/LCD_D1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Connector_Multicomp.3dshapes/Multicomp_MC9A12-1034_2x05_P2.54mm_Vertical.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
(model ${SHIMATTA_DIR}/footprints/packages3d/tht.shapes3d/Pin_Header_Socket_2x05.x3d
(offset (xyz 5.08 1.27 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF174C)
(at 59.75 108 180)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5DB0C2DA)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R317 (at 0 -1.43 180) (layer F.SilkS)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text value 250 (at 0 1.43 180) (layer F.Fab)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 180) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 52 "Net-(C313-Pad1)"))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 21 /Controller/TEMP_IN))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E028BA7)
(at 79 86.5 270)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5D910C4E)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C309 (at 0 -3.5 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 59 +3.3VA))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1154)
(at 79.5 84)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5D932D1C)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C306 (at 3.5 0) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 1u (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 51 "Net-(C306-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF16C4)
(at 79.5 82)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5D947159)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R310 (at 3.5 0) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value "1k 0.1%" (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 51 "Net-(C306-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF1691)
(at 76 82 180)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5D9371CC)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R306 (at -7 2) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value "24k 0.1%" (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 68 "Net-(C303-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 51 "Net-(C306-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF1719)
(at 73 83.5 90)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5D90BA7B)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R316 (at -4 0 270) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value "1k 0.1%" (at 0 1.43 270) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0 270) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 11 /Frontend/FORCE-))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module shimatta_tht:BV-EI-303-2010 (layer F.Cu) (tedit 5E092AF7) (tstamp 5DEF178F)
(at 70 35.5 180)
(path /5D6EA3F7)
(fp_text reference T101 (at 12 17.5 180) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 230VAC/6VAC (at 0 -0.5 180) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 13.9 -16.4) (end 13.9 16.4) (layer F.SilkS) (width 0.15))
(fp_line (start -13.9 16.4) (end 13.9 16.4) (layer F.SilkS) (width 0.15))
(fp_line (start -13.9 -16.4) (end -13.9 16.4) (layer F.SilkS) (width 0.15))
(fp_line (start -13.9 -16.4) (end 13.9 -16.4) (layer F.SilkS) (width 0.15))
(pad 4 thru_hole circle (at 10 -5 180) (size 2 2) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 54 "Net-(D101-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 thru_hole circle (at 10 5 180) (size 2 2) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 56 "Net-(F102-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 thru_hole circle (at -10 -10 180) (size 2 2) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 22 /L_Trafo))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 thru_hole circle (at -10 10 180) (size 2 2) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 24 /N_IN))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
(module Capacitor_SMD:C_1206_3216Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF0E11)
(at 26.5 20.5 90)
(descr "Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D708E87)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C113 (at 0 -1.82 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n/1kV (at 0 1.82 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.8 0.8) (thickness 0.12)))
)
(fp_line (start 2.28 1.12) (end -2.28 1.12) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 -1.12) (end 2.28 1.12) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 -1.12) (end 2.28 -1.12) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 1.12) (end -2.28 -1.12) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12))
(fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12))
(fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 1.4 0 90) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 1 Earth))
(pad 1 smd roundrect (at -1.4 0 90) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_1206_3216Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_1206_3216Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF0E22)
(at 85.5 102.5)
(descr "Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D707F91)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C114 (at 0 -1.82) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n/1kV (at 0 1.82) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1))
(fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12))
(fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12))
(fp_line (start -2.28 1.12) (end -2.28 -1.12) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 -1.12) (end 2.28 -1.12) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 -1.12) (end 2.28 1.12) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 1.12) (end -2.28 1.12) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.8 0.8) (thickness 0.12)))
)
(pad 1 smd roundrect (at -1.4 0) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 2 GND))
(pad 2 smd roundrect (at 1.4 0) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 1 Earth))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_1206_3216Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_THT:CP_Radial_D8.0mm_P3.50mm (layer F.Cu) (tedit 5AE50EF0) (tstamp 5DEF0ECB)
(at 37 40 90)
(descr "CP, Radial series, Radial, pin pitch=3.50mm, , diameter=8mm, Electrolytic Capacitor")
(tags "CP Radial series Radial pin pitch 3.50mm diameter 8mm Electrolytic Capacitor")
(path /5D7133CA)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference C104 (at 1.75 -5.25 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 470u (at 1.75 5.25 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 1.75 0 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -2.259698 -2.715) (end -2.259698 -1.915) (layer F.SilkS) (width 0.12))
(fp_line (start -2.659698 -2.315) (end -1.859698 -2.315) (layer F.SilkS) (width 0.12))
(fp_line (start 5.831 -0.533) (end 5.831 0.533) (layer F.SilkS) (width 0.12))
(fp_line (start 5.791 -0.768) (end 5.791 0.768) (layer F.SilkS) (width 0.12))
(fp_line (start 5.751 -0.948) (end 5.751 0.948) (layer F.SilkS) (width 0.12))
(fp_line (start 5.711 -1.098) (end 5.711 1.098) (layer F.SilkS) (width 0.12))
(fp_line (start 5.671 -1.229) (end 5.671 1.229) (layer F.SilkS) (width 0.12))
(fp_line (start 5.631 -1.346) (end 5.631 1.346) (layer F.SilkS) (width 0.12))
(fp_line (start 5.591 -1.453) (end 5.591 1.453) (layer F.SilkS) (width 0.12))
(fp_line (start 5.551 -1.552) (end 5.551 1.552) (layer F.SilkS) (width 0.12))
(fp_line (start 5.511 -1.645) (end 5.511 1.645) (layer F.SilkS) (width 0.12))
(fp_line (start 5.471 -1.731) (end 5.471 1.731) (layer F.SilkS) (width 0.12))
(fp_line (start 5.431 -1.813) (end 5.431 1.813) (layer F.SilkS) (width 0.12))
(fp_line (start 5.391 -1.89) (end 5.391 1.89) (layer F.SilkS) (width 0.12))
(fp_line (start 5.351 -1.964) (end 5.351 1.964) (layer F.SilkS) (width 0.12))
(fp_line (start 5.311 -2.034) (end 5.311 2.034) (layer F.SilkS) (width 0.12))
(fp_line (start 5.271 -2.102) (end 5.271 2.102) (layer F.SilkS) (width 0.12))
(fp_line (start 5.231 -2.166) (end 5.231 2.166) (layer F.SilkS) (width 0.12))
(fp_line (start 5.191 -2.228) (end 5.191 2.228) (layer F.SilkS) (width 0.12))
(fp_line (start 5.151 -2.287) (end 5.151 2.287) (layer F.SilkS) (width 0.12))
(fp_line (start 5.111 -2.345) (end 5.111 2.345) (layer F.SilkS) (width 0.12))
(fp_line (start 5.071 -2.4) (end 5.071 2.4) (layer F.SilkS) (width 0.12))
(fp_line (start 5.031 -2.454) (end 5.031 2.454) (layer F.SilkS) (width 0.12))
(fp_line (start 4.991 -2.505) (end 4.991 2.505) (layer F.SilkS) (width 0.12))
(fp_line (start 4.951 -2.556) (end 4.951 2.556) (layer F.SilkS) (width 0.12))
(fp_line (start 4.911 -2.604) (end 4.911 2.604) (layer F.SilkS) (width 0.12))
(fp_line (start 4.871 -2.651) (end 4.871 2.651) (layer F.SilkS) (width 0.12))
(fp_line (start 4.831 -2.697) (end 4.831 2.697) (layer F.SilkS) (width 0.12))
(fp_line (start 4.791 -2.741) (end 4.791 2.741) (layer F.SilkS) (width 0.12))
(fp_line (start 4.751 -2.784) (end 4.751 2.784) (layer F.SilkS) (width 0.12))
(fp_line (start 4.711 -2.826) (end 4.711 2.826) (layer F.SilkS) (width 0.12))
(fp_line (start 4.671 -2.867) (end 4.671 2.867) (layer F.SilkS) (width 0.12))
(fp_line (start 4.631 -2.907) (end 4.631 2.907) (layer F.SilkS) (width 0.12))
(fp_line (start 4.591 -2.945) (end 4.591 2.945) (layer F.SilkS) (width 0.12))
(fp_line (start 4.551 -2.983) (end 4.551 2.983) (layer F.SilkS) (width 0.12))
(fp_line (start 4.511 1.04) (end 4.511 3.019) (layer F.SilkS) (width 0.12))
(fp_line (start 4.511 -3.019) (end 4.511 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.471 1.04) (end 4.471 3.055) (layer F.SilkS) (width 0.12))
(fp_line (start 4.471 -3.055) (end 4.471 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.431 1.04) (end 4.431 3.09) (layer F.SilkS) (width 0.12))
(fp_line (start 4.431 -3.09) (end 4.431 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.391 1.04) (end 4.391 3.124) (layer F.SilkS) (width 0.12))
(fp_line (start 4.391 -3.124) (end 4.391 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.351 1.04) (end 4.351 3.156) (layer F.SilkS) (width 0.12))
(fp_line (start 4.351 -3.156) (end 4.351 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.311 1.04) (end 4.311 3.189) (layer F.SilkS) (width 0.12))
(fp_line (start 4.311 -3.189) (end 4.311 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.271 1.04) (end 4.271 3.22) (layer F.SilkS) (width 0.12))
(fp_line (start 4.271 -3.22) (end 4.271 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.231 1.04) (end 4.231 3.25) (layer F.SilkS) (width 0.12))
(fp_line (start 4.231 -3.25) (end 4.231 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.191 1.04) (end 4.191 3.28) (layer F.SilkS) (width 0.12))
(fp_line (start 4.191 -3.28) (end 4.191 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.151 1.04) (end 4.151 3.309) (layer F.SilkS) (width 0.12))
(fp_line (start 4.151 -3.309) (end 4.151 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.111 1.04) (end 4.111 3.338) (layer F.SilkS) (width 0.12))
(fp_line (start 4.111 -3.338) (end 4.111 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.071 1.04) (end 4.071 3.365) (layer F.SilkS) (width 0.12))
(fp_line (start 4.071 -3.365) (end 4.071 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.031 1.04) (end 4.031 3.392) (layer F.SilkS) (width 0.12))
(fp_line (start 4.031 -3.392) (end 4.031 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.991 1.04) (end 3.991 3.418) (layer F.SilkS) (width 0.12))
(fp_line (start 3.991 -3.418) (end 3.991 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.951 1.04) (end 3.951 3.444) (layer F.SilkS) (width 0.12))
(fp_line (start 3.951 -3.444) (end 3.951 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.911 1.04) (end 3.911 3.469) (layer F.SilkS) (width 0.12))
(fp_line (start 3.911 -3.469) (end 3.911 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.871 1.04) (end 3.871 3.493) (layer F.SilkS) (width 0.12))
(fp_line (start 3.871 -3.493) (end 3.871 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.831 1.04) (end 3.831 3.517) (layer F.SilkS) (width 0.12))
(fp_line (start 3.831 -3.517) (end 3.831 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.791 1.04) (end 3.791 3.54) (layer F.SilkS) (width 0.12))
(fp_line (start 3.791 -3.54) (end 3.791 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.751 1.04) (end 3.751 3.562) (layer F.SilkS) (width 0.12))
(fp_line (start 3.751 -3.562) (end 3.751 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.711 1.04) (end 3.711 3.584) (layer F.SilkS) (width 0.12))
(fp_line (start 3.711 -3.584) (end 3.711 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.671 1.04) (end 3.671 3.606) (layer F.SilkS) (width 0.12))
(fp_line (start 3.671 -3.606) (end 3.671 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.631 1.04) (end 3.631 3.627) (layer F.SilkS) (width 0.12))
(fp_line (start 3.631 -3.627) (end 3.631 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.591 1.04) (end 3.591 3.647) (layer F.SilkS) (width 0.12))
(fp_line (start 3.591 -3.647) (end 3.591 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.551 1.04) (end 3.551 3.666) (layer F.SilkS) (width 0.12))
(fp_line (start 3.551 -3.666) (end 3.551 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.511 1.04) (end 3.511 3.686) (layer F.SilkS) (width 0.12))
(fp_line (start 3.511 -3.686) (end 3.511 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.471 1.04) (end 3.471 3.704) (layer F.SilkS) (width 0.12))
(fp_line (start 3.471 -3.704) (end 3.471 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.431 1.04) (end 3.431 3.722) (layer F.SilkS) (width 0.12))
(fp_line (start 3.431 -3.722) (end 3.431 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.391 1.04) (end 3.391 3.74) (layer F.SilkS) (width 0.12))
(fp_line (start 3.391 -3.74) (end 3.391 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.351 1.04) (end 3.351 3.757) (layer F.SilkS) (width 0.12))
(fp_line (start 3.351 -3.757) (end 3.351 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.311 1.04) (end 3.311 3.774) (layer F.SilkS) (width 0.12))
(fp_line (start 3.311 -3.774) (end 3.311 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.271 1.04) (end 3.271 3.79) (layer F.SilkS) (width 0.12))
(fp_line (start 3.271 -3.79) (end 3.271 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.231 1.04) (end 3.231 3.805) (layer F.SilkS) (width 0.12))
(fp_line (start 3.231 -3.805) (end 3.231 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.191 1.04) (end 3.191 3.821) (layer F.SilkS) (width 0.12))
(fp_line (start 3.191 -3.821) (end 3.191 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.151 1.04) (end 3.151 3.835) (layer F.SilkS) (width 0.12))
(fp_line (start 3.151 -3.835) (end 3.151 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.111 1.04) (end 3.111 3.85) (layer F.SilkS) (width 0.12))
(fp_line (start 3.111 -3.85) (end 3.111 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.071 1.04) (end 3.071 3.863) (layer F.SilkS) (width 0.12))
(fp_line (start 3.071 -3.863) (end 3.071 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.031 1.04) (end 3.031 3.877) (layer F.SilkS) (width 0.12))
(fp_line (start 3.031 -3.877) (end 3.031 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.991 1.04) (end 2.991 3.889) (layer F.SilkS) (width 0.12))
(fp_line (start 2.991 -3.889) (end 2.991 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.951 1.04) (end 2.951 3.902) (layer F.SilkS) (width 0.12))
(fp_line (start 2.951 -3.902) (end 2.951 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.911 1.04) (end 2.911 3.914) (layer F.SilkS) (width 0.12))
(fp_line (start 2.911 -3.914) (end 2.911 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.871 1.04) (end 2.871 3.925) (layer F.SilkS) (width 0.12))
(fp_line (start 2.871 -3.925) (end 2.871 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.831 1.04) (end 2.831 3.936) (layer F.SilkS) (width 0.12))
(fp_line (start 2.831 -3.936) (end 2.831 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.791 1.04) (end 2.791 3.947) (layer F.SilkS) (width 0.12))
(fp_line (start 2.791 -3.947) (end 2.791 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.751 1.04) (end 2.751 3.957) (layer F.SilkS) (width 0.12))
(fp_line (start 2.751 -3.957) (end 2.751 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.711 1.04) (end 2.711 3.967) (layer F.SilkS) (width 0.12))
(fp_line (start 2.711 -3.967) (end 2.711 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.671 1.04) (end 2.671 3.976) (layer F.SilkS) (width 0.12))
(fp_line (start 2.671 -3.976) (end 2.671 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.631 1.04) (end 2.631 3.985) (layer F.SilkS) (width 0.12))
(fp_line (start 2.631 -3.985) (end 2.631 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.591 1.04) (end 2.591 3.994) (layer F.SilkS) (width 0.12))
(fp_line (start 2.591 -3.994) (end 2.591 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.551 1.04) (end 2.551 4.002) (layer F.SilkS) (width 0.12))
(fp_line (start 2.551 -4.002) (end 2.551 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.511 1.04) (end 2.511 4.01) (layer F.SilkS) (width 0.12))
(fp_line (start 2.511 -4.01) (end 2.511 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.471 1.04) (end 2.471 4.017) (layer F.SilkS) (width 0.12))
(fp_line (start 2.471 -4.017) (end 2.471 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.43 -4.024) (end 2.43 4.024) (layer F.SilkS) (width 0.12))
(fp_line (start 2.39 -4.03) (end 2.39 4.03) (layer F.SilkS) (width 0.12))
(fp_line (start 2.35 -4.037) (end 2.35 4.037) (layer F.SilkS) (width 0.12))
(fp_line (start 2.31 -4.042) (end 2.31 4.042) (layer F.SilkS) (width 0.12))
(fp_line (start 2.27 -4.048) (end 2.27 4.048) (layer F.SilkS) (width 0.12))
(fp_line (start 2.23 -4.052) (end 2.23 4.052) (layer F.SilkS) (width 0.12))
(fp_line (start 2.19 -4.057) (end 2.19 4.057) (layer F.SilkS) (width 0.12))
(fp_line (start 2.15 -4.061) (end 2.15 4.061) (layer F.SilkS) (width 0.12))
(fp_line (start 2.11 -4.065) (end 2.11 4.065) (layer F.SilkS) (width 0.12))
(fp_line (start 2.07 -4.068) (end 2.07 4.068) (layer F.SilkS) (width 0.12))
(fp_line (start 2.03 -4.071) (end 2.03 4.071) (layer F.SilkS) (width 0.12))
(fp_line (start 1.99 -4.074) (end 1.99 4.074) (layer F.SilkS) (width 0.12))
(fp_line (start 1.95 -4.076) (end 1.95 4.076) (layer F.SilkS) (width 0.12))
(fp_line (start 1.91 -4.077) (end 1.91 4.077) (layer F.SilkS) (width 0.12))
(fp_line (start 1.87 -4.079) (end 1.87 4.079) (layer F.SilkS) (width 0.12))
(fp_line (start 1.83 -4.08) (end 1.83 4.08) (layer F.SilkS) (width 0.12))
(fp_line (start 1.79 -4.08) (end 1.79 4.08) (layer F.SilkS) (width 0.12))
(fp_line (start 1.75 -4.08) (end 1.75 4.08) (layer F.SilkS) (width 0.12))
(fp_line (start -1.276759 -2.1475) (end -1.276759 -1.3475) (layer F.Fab) (width 0.1))
(fp_line (start -1.676759 -1.7475) (end -0.876759 -1.7475) (layer F.Fab) (width 0.1))
(fp_circle (center 1.75 0) (end 6 0) (layer F.CrtYd) (width 0.05))
(fp_circle (center 1.75 0) (end 5.87 0) (layer F.SilkS) (width 0.12))
(fp_circle (center 1.75 0) (end 5.75 0) (layer F.Fab) (width 0.1))
(pad 2 thru_hole circle (at 3.5 0 90) (size 1.6 1.6) (drill 0.8) (layers *.Cu *.Mask)
(net 2 GND))
(pad 1 thru_hole rect (at 0 0 90) (size 1.6 1.6) (drill 0.8) (layers *.Cu *.Mask)
(net 3 +8V))
(model ${KISYS3DMOD}/Capacitor_THT.3dshapes/CP_Radial_D8.0mm_P3.50mm.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_THT:CP_Radial_D8.0mm_P3.50mm (layer F.Cu) (tedit 5AE50EF0) (tstamp 5DEF0F74)
(at 26.5 40 90)
(descr "CP, Radial series, Radial, pin pitch=3.50mm, , diameter=8mm, Electrolytic Capacitor")
(tags "CP Radial series Radial pin pitch 3.50mm diameter 8mm Electrolytic Capacitor")
(path /5D7139D5)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference C105 (at 1.75 -5.25 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 470u (at 1.75 5.25 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_circle (center 1.75 0) (end 5.75 0) (layer F.Fab) (width 0.1))
(fp_circle (center 1.75 0) (end 5.87 0) (layer F.SilkS) (width 0.12))
(fp_circle (center 1.75 0) (end 6 0) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.676759 -1.7475) (end -0.876759 -1.7475) (layer F.Fab) (width 0.1))
(fp_line (start -1.276759 -2.1475) (end -1.276759 -1.3475) (layer F.Fab) (width 0.1))
(fp_line (start 1.75 -4.08) (end 1.75 4.08) (layer F.SilkS) (width 0.12))
(fp_line (start 1.79 -4.08) (end 1.79 4.08) (layer F.SilkS) (width 0.12))
(fp_line (start 1.83 -4.08) (end 1.83 4.08) (layer F.SilkS) (width 0.12))
(fp_line (start 1.87 -4.079) (end 1.87 4.079) (layer F.SilkS) (width 0.12))
(fp_line (start 1.91 -4.077) (end 1.91 4.077) (layer F.SilkS) (width 0.12))
(fp_line (start 1.95 -4.076) (end 1.95 4.076) (layer F.SilkS) (width 0.12))
(fp_line (start 1.99 -4.074) (end 1.99 4.074) (layer F.SilkS) (width 0.12))
(fp_line (start 2.03 -4.071) (end 2.03 4.071) (layer F.SilkS) (width 0.12))
(fp_line (start 2.07 -4.068) (end 2.07 4.068) (layer F.SilkS) (width 0.12))
(fp_line (start 2.11 -4.065) (end 2.11 4.065) (layer F.SilkS) (width 0.12))
(fp_line (start 2.15 -4.061) (end 2.15 4.061) (layer F.SilkS) (width 0.12))
(fp_line (start 2.19 -4.057) (end 2.19 4.057) (layer F.SilkS) (width 0.12))
(fp_line (start 2.23 -4.052) (end 2.23 4.052) (layer F.SilkS) (width 0.12))
(fp_line (start 2.27 -4.048) (end 2.27 4.048) (layer F.SilkS) (width 0.12))
(fp_line (start 2.31 -4.042) (end 2.31 4.042) (layer F.SilkS) (width 0.12))
(fp_line (start 2.35 -4.037) (end 2.35 4.037) (layer F.SilkS) (width 0.12))
(fp_line (start 2.39 -4.03) (end 2.39 4.03) (layer F.SilkS) (width 0.12))
(fp_line (start 2.43 -4.024) (end 2.43 4.024) (layer F.SilkS) (width 0.12))
(fp_line (start 2.471 -4.017) (end 2.471 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.471 1.04) (end 2.471 4.017) (layer F.SilkS) (width 0.12))
(fp_line (start 2.511 -4.01) (end 2.511 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.511 1.04) (end 2.511 4.01) (layer F.SilkS) (width 0.12))
(fp_line (start 2.551 -4.002) (end 2.551 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.551 1.04) (end 2.551 4.002) (layer F.SilkS) (width 0.12))
(fp_line (start 2.591 -3.994) (end 2.591 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.591 1.04) (end 2.591 3.994) (layer F.SilkS) (width 0.12))
(fp_line (start 2.631 -3.985) (end 2.631 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.631 1.04) (end 2.631 3.985) (layer F.SilkS) (width 0.12))
(fp_line (start 2.671 -3.976) (end 2.671 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.671 1.04) (end 2.671 3.976) (layer F.SilkS) (width 0.12))
(fp_line (start 2.711 -3.967) (end 2.711 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.711 1.04) (end 2.711 3.967) (layer F.SilkS) (width 0.12))
(fp_line (start 2.751 -3.957) (end 2.751 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.751 1.04) (end 2.751 3.957) (layer F.SilkS) (width 0.12))
(fp_line (start 2.791 -3.947) (end 2.791 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.791 1.04) (end 2.791 3.947) (layer F.SilkS) (width 0.12))
(fp_line (start 2.831 -3.936) (end 2.831 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.831 1.04) (end 2.831 3.936) (layer F.SilkS) (width 0.12))
(fp_line (start 2.871 -3.925) (end 2.871 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.871 1.04) (end 2.871 3.925) (layer F.SilkS) (width 0.12))
(fp_line (start 2.911 -3.914) (end 2.911 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.911 1.04) (end 2.911 3.914) (layer F.SilkS) (width 0.12))
(fp_line (start 2.951 -3.902) (end 2.951 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.951 1.04) (end 2.951 3.902) (layer F.SilkS) (width 0.12))
(fp_line (start 2.991 -3.889) (end 2.991 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.991 1.04) (end 2.991 3.889) (layer F.SilkS) (width 0.12))
(fp_line (start 3.031 -3.877) (end 3.031 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.031 1.04) (end 3.031 3.877) (layer F.SilkS) (width 0.12))
(fp_line (start 3.071 -3.863) (end 3.071 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.071 1.04) (end 3.071 3.863) (layer F.SilkS) (width 0.12))
(fp_line (start 3.111 -3.85) (end 3.111 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.111 1.04) (end 3.111 3.85) (layer F.SilkS) (width 0.12))
(fp_line (start 3.151 -3.835) (end 3.151 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.151 1.04) (end 3.151 3.835) (layer F.SilkS) (width 0.12))
(fp_line (start 3.191 -3.821) (end 3.191 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.191 1.04) (end 3.191 3.821) (layer F.SilkS) (width 0.12))
(fp_line (start 3.231 -3.805) (end 3.231 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.231 1.04) (end 3.231 3.805) (layer F.SilkS) (width 0.12))
(fp_line (start 3.271 -3.79) (end 3.271 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.271 1.04) (end 3.271 3.79) (layer F.SilkS) (width 0.12))
(fp_line (start 3.311 -3.774) (end 3.311 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.311 1.04) (end 3.311 3.774) (layer F.SilkS) (width 0.12))
(fp_line (start 3.351 -3.757) (end 3.351 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.351 1.04) (end 3.351 3.757) (layer F.SilkS) (width 0.12))
(fp_line (start 3.391 -3.74) (end 3.391 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.391 1.04) (end 3.391 3.74) (layer F.SilkS) (width 0.12))
(fp_line (start 3.431 -3.722) (end 3.431 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.431 1.04) (end 3.431 3.722) (layer F.SilkS) (width 0.12))
(fp_line (start 3.471 -3.704) (end 3.471 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.471 1.04) (end 3.471 3.704) (layer F.SilkS) (width 0.12))
(fp_line (start 3.511 -3.686) (end 3.511 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.511 1.04) (end 3.511 3.686) (layer F.SilkS) (width 0.12))
(fp_line (start 3.551 -3.666) (end 3.551 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.551 1.04) (end 3.551 3.666) (layer F.SilkS) (width 0.12))
(fp_line (start 3.591 -3.647) (end 3.591 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.591 1.04) (end 3.591 3.647) (layer F.SilkS) (width 0.12))
(fp_line (start 3.631 -3.627) (end 3.631 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.631 1.04) (end 3.631 3.627) (layer F.SilkS) (width 0.12))
(fp_line (start 3.671 -3.606) (end 3.671 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.671 1.04) (end 3.671 3.606) (layer F.SilkS) (width 0.12))
(fp_line (start 3.711 -3.584) (end 3.711 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.711 1.04) (end 3.711 3.584) (layer F.SilkS) (width 0.12))
(fp_line (start 3.751 -3.562) (end 3.751 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.751 1.04) (end 3.751 3.562) (layer F.SilkS) (width 0.12))
(fp_line (start 3.791 -3.54) (end 3.791 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.791 1.04) (end 3.791 3.54) (layer F.SilkS) (width 0.12))
(fp_line (start 3.831 -3.517) (end 3.831 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.831 1.04) (end 3.831 3.517) (layer F.SilkS) (width 0.12))
(fp_line (start 3.871 -3.493) (end 3.871 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.871 1.04) (end 3.871 3.493) (layer F.SilkS) (width 0.12))
(fp_line (start 3.911 -3.469) (end 3.911 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.911 1.04) (end 3.911 3.469) (layer F.SilkS) (width 0.12))
(fp_line (start 3.951 -3.444) (end 3.951 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.951 1.04) (end 3.951 3.444) (layer F.SilkS) (width 0.12))
(fp_line (start 3.991 -3.418) (end 3.991 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.991 1.04) (end 3.991 3.418) (layer F.SilkS) (width 0.12))
(fp_line (start 4.031 -3.392) (end 4.031 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.031 1.04) (end 4.031 3.392) (layer F.SilkS) (width 0.12))
(fp_line (start 4.071 -3.365) (end 4.071 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.071 1.04) (end 4.071 3.365) (layer F.SilkS) (width 0.12))
(fp_line (start 4.111 -3.338) (end 4.111 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.111 1.04) (end 4.111 3.338) (layer F.SilkS) (width 0.12))
(fp_line (start 4.151 -3.309) (end 4.151 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.151 1.04) (end 4.151 3.309) (layer F.SilkS) (width 0.12))
(fp_line (start 4.191 -3.28) (end 4.191 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.191 1.04) (end 4.191 3.28) (layer F.SilkS) (width 0.12))
(fp_line (start 4.231 -3.25) (end 4.231 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.231 1.04) (end 4.231 3.25) (layer F.SilkS) (width 0.12))
(fp_line (start 4.271 -3.22) (end 4.271 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.271 1.04) (end 4.271 3.22) (layer F.SilkS) (width 0.12))
(fp_line (start 4.311 -3.189) (end 4.311 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.311 1.04) (end 4.311 3.189) (layer F.SilkS) (width 0.12))
(fp_line (start 4.351 -3.156) (end 4.351 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.351 1.04) (end 4.351 3.156) (layer F.SilkS) (width 0.12))
(fp_line (start 4.391 -3.124) (end 4.391 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.391 1.04) (end 4.391 3.124) (layer F.SilkS) (width 0.12))
(fp_line (start 4.431 -3.09) (end 4.431 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.431 1.04) (end 4.431 3.09) (layer F.SilkS) (width 0.12))
(fp_line (start 4.471 -3.055) (end 4.471 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.471 1.04) (end 4.471 3.055) (layer F.SilkS) (width 0.12))
(fp_line (start 4.511 -3.019) (end 4.511 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.511 1.04) (end 4.511 3.019) (layer F.SilkS) (width 0.12))
(fp_line (start 4.551 -2.983) (end 4.551 2.983) (layer F.SilkS) (width 0.12))
(fp_line (start 4.591 -2.945) (end 4.591 2.945) (layer F.SilkS) (width 0.12))
(fp_line (start 4.631 -2.907) (end 4.631 2.907) (layer F.SilkS) (width 0.12))
(fp_line (start 4.671 -2.867) (end 4.671 2.867) (layer F.SilkS) (width 0.12))
(fp_line (start 4.711 -2.826) (end 4.711 2.826) (layer F.SilkS) (width 0.12))
(fp_line (start 4.751 -2.784) (end 4.751 2.784) (layer F.SilkS) (width 0.12))
(fp_line (start 4.791 -2.741) (end 4.791 2.741) (layer F.SilkS) (width 0.12))
(fp_line (start 4.831 -2.697) (end 4.831 2.697) (layer F.SilkS) (width 0.12))
(fp_line (start 4.871 -2.651) (end 4.871 2.651) (layer F.SilkS) (width 0.12))
(fp_line (start 4.911 -2.604) (end 4.911 2.604) (layer F.SilkS) (width 0.12))
(fp_line (start 4.951 -2.556) (end 4.951 2.556) (layer F.SilkS) (width 0.12))
(fp_line (start 4.991 -2.505) (end 4.991 2.505) (layer F.SilkS) (width 0.12))
(fp_line (start 5.031 -2.454) (end 5.031 2.454) (layer F.SilkS) (width 0.12))
(fp_line (start 5.071 -2.4) (end 5.071 2.4) (layer F.SilkS) (width 0.12))
(fp_line (start 5.111 -2.345) (end 5.111 2.345) (layer F.SilkS) (width 0.12))
(fp_line (start 5.151 -2.287) (end 5.151 2.287) (layer F.SilkS) (width 0.12))
(fp_line (start 5.191 -2.228) (end 5.191 2.228) (layer F.SilkS) (width 0.12))
(fp_line (start 5.231 -2.166) (end 5.231 2.166) (layer F.SilkS) (width 0.12))
(fp_line (start 5.271 -2.102) (end 5.271 2.102) (layer F.SilkS) (width 0.12))
(fp_line (start 5.311 -2.034) (end 5.311 2.034) (layer F.SilkS) (width 0.12))
(fp_line (start 5.351 -1.964) (end 5.351 1.964) (layer F.SilkS) (width 0.12))
(fp_line (start 5.391 -1.89) (end 5.391 1.89) (layer F.SilkS) (width 0.12))
(fp_line (start 5.431 -1.813) (end 5.431 1.813) (layer F.SilkS) (width 0.12))
(fp_line (start 5.471 -1.731) (end 5.471 1.731) (layer F.SilkS) (width 0.12))
(fp_line (start 5.511 -1.645) (end 5.511 1.645) (layer F.SilkS) (width 0.12))
(fp_line (start 5.551 -1.552) (end 5.551 1.552) (layer F.SilkS) (width 0.12))
(fp_line (start 5.591 -1.453) (end 5.591 1.453) (layer F.SilkS) (width 0.12))
(fp_line (start 5.631 -1.346) (end 5.631 1.346) (layer F.SilkS) (width 0.12))
(fp_line (start 5.671 -1.229) (end 5.671 1.229) (layer F.SilkS) (width 0.12))
(fp_line (start 5.711 -1.098) (end 5.711 1.098) (layer F.SilkS) (width 0.12))
(fp_line (start 5.751 -0.948) (end 5.751 0.948) (layer F.SilkS) (width 0.12))
(fp_line (start 5.791 -0.768) (end 5.791 0.768) (layer F.SilkS) (width 0.12))
(fp_line (start 5.831 -0.533) (end 5.831 0.533) (layer F.SilkS) (width 0.12))
(fp_line (start -2.659698 -2.315) (end -1.859698 -2.315) (layer F.SilkS) (width 0.12))
(fp_line (start -2.259698 -2.715) (end -2.259698 -1.915) (layer F.SilkS) (width 0.12))
(fp_text user %R (at 1.75 0 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 thru_hole rect (at 0 0 90) (size 1.6 1.6) (drill 0.8) (layers *.Cu *.Mask)
(net 3 +8V))
(pad 2 thru_hole circle (at 3.5 0 90) (size 1.6 1.6) (drill 0.8) (layers *.Cu *.Mask)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_THT.3dshapes/CP_Radial_D8.0mm_P3.50mm.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5DEF0F85)
(at 29.5 47.5 270)
(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D71F258)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference C106 (at -1.59 1.71 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.65 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1))
(fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1))
(fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1))
(fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1))
(fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12))
(fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12))
(fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)))
)
(pad 1 smd roundrect (at -0.9375 0 270) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 3 +8V))
(pad 2 smd roundrect (at 0.9375 0 270) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5DEF0F96)
(at 78.5 73 180)
(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D992429)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference C107 (at -3.5 0) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.65) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)))
)
(fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12))
(fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12))
(fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1))
(fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1))
(fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1))
(fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.9375 0 180) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.9375 0 180) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 3 +8V))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF0FA7)
(at 39.5 49.5 90)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D722F9B)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference C108 (at 0.22 1.81 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_Elec_5x5.4 (layer F.Cu) (tedit 5BC8D926) (tstamp 5DEF0FCB)
(at 76 56 180)
(descr "SMD capacitor, aluminum electrolytic nonpolar, 5.0x5.4mm")
(tags "capacitor electrolyic nonpolar")
(path /5D9883BA)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference C109 (at 0 -3.7) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10u (at 0 3.7) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -3.7 1.05) (end -2.9 1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -3.7 -1.05) (end -3.7 1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.9 -1.05) (end -3.7 -1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.9 1.05) (end -2.9 1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.9 -1.75) (end -2.9 -1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.9 -1.75) (end -1.75 -2.9) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.9 1.75) (end -1.75 2.9) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.75 -2.9) (end 2.9 -2.9) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.75 2.9) (end 2.9 2.9) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.9 1.05) (end 2.9 2.9) (layer F.CrtYd) (width 0.05))
(fp_line (start 3.7 1.05) (end 2.9 1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 3.7 -1.05) (end 3.7 1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.9 -1.05) (end 3.7 -1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.9 -2.9) (end 2.9 -1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.76 1.695563) (end -1.695563 2.76) (layer F.SilkS) (width 0.12))
(fp_line (start -2.76 -1.695563) (end -1.695563 -2.76) (layer F.SilkS) (width 0.12))
(fp_line (start -2.76 -1.695563) (end -2.76 -1.06) (layer F.SilkS) (width 0.12))
(fp_line (start -2.76 1.695563) (end -2.76 1.06) (layer F.SilkS) (width 0.12))
(fp_line (start -1.695563 2.76) (end 2.76 2.76) (layer F.SilkS) (width 0.12))
(fp_line (start -1.695563 -2.76) (end 2.76 -2.76) (layer F.SilkS) (width 0.12))
(fp_line (start 2.76 -2.76) (end 2.76 -1.06) (layer F.SilkS) (width 0.12))
(fp_line (start 2.76 2.76) (end 2.76 1.06) (layer F.SilkS) (width 0.12))
(fp_line (start -2.65 1.65) (end -1.65 2.65) (layer F.Fab) (width 0.1))
(fp_line (start -2.65 -1.65) (end -1.65 -2.65) (layer F.Fab) (width 0.1))
(fp_line (start -2.65 -1.65) (end -2.65 1.65) (layer F.Fab) (width 0.1))
(fp_line (start -1.65 2.65) (end 2.65 2.65) (layer F.Fab) (width 0.1))
(fp_line (start -1.65 -2.65) (end 2.65 -2.65) (layer F.Fab) (width 0.1))
(fp_line (start 2.65 -2.65) (end 2.65 2.65) (layer F.Fab) (width 0.1))
(fp_circle (center 0 0) (end 2.5 0) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 2.0625 0 180) (size 2.775 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.15625)
(net 2 GND))
(pad 1 smd roundrect (at -2.0625 0 180) (size 2.775 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.15625)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 48 +5VL))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_Elec_5x5.4.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_Elec_5x5.4 (layer F.Cu) (tedit 5BC8D926) (tstamp 5DEF0FEF)
(at 39.5 58)
(descr "SMD capacitor, aluminum electrolytic nonpolar, 5.0x5.4mm")
(tags "capacitor electrolyic nonpolar")
(path /5D7289BD)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference C110 (at 1.54 -3.71) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10u (at 0 3.7) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_circle (center 0 0) (end 2.5 0) (layer F.Fab) (width 0.1))
(fp_line (start 2.65 -2.65) (end 2.65 2.65) (layer F.Fab) (width 0.1))
(fp_line (start -1.65 -2.65) (end 2.65 -2.65) (layer F.Fab) (width 0.1))
(fp_line (start -1.65 2.65) (end 2.65 2.65) (layer F.Fab) (width 0.1))
(fp_line (start -2.65 -1.65) (end -2.65 1.65) (layer F.Fab) (width 0.1))
(fp_line (start -2.65 -1.65) (end -1.65 -2.65) (layer F.Fab) (width 0.1))
(fp_line (start -2.65 1.65) (end -1.65 2.65) (layer F.Fab) (width 0.1))
(fp_line (start 2.76 2.76) (end 2.76 1.06) (layer F.SilkS) (width 0.12))
(fp_line (start 2.76 -2.76) (end 2.76 -1.06) (layer F.SilkS) (width 0.12))
(fp_line (start -1.695563 -2.76) (end 2.76 -2.76) (layer F.SilkS) (width 0.12))
(fp_line (start -1.695563 2.76) (end 2.76 2.76) (layer F.SilkS) (width 0.12))
(fp_line (start -2.76 1.695563) (end -2.76 1.06) (layer F.SilkS) (width 0.12))
(fp_line (start -2.76 -1.695563) (end -2.76 -1.06) (layer F.SilkS) (width 0.12))
(fp_line (start -2.76 -1.695563) (end -1.695563 -2.76) (layer F.SilkS) (width 0.12))
(fp_line (start -2.76 1.695563) (end -1.695563 2.76) (layer F.SilkS) (width 0.12))
(fp_line (start 2.9 -2.9) (end 2.9 -1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.9 -1.05) (end 3.7 -1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 3.7 -1.05) (end 3.7 1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 3.7 1.05) (end 2.9 1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.9 1.05) (end 2.9 2.9) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.75 2.9) (end 2.9 2.9) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.75 -2.9) (end 2.9 -2.9) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.9 1.75) (end -1.75 2.9) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.9 -1.75) (end -1.75 -2.9) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.9 -1.75) (end -2.9 -1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.9 1.05) (end -2.9 1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.9 -1.05) (end -3.7 -1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -3.7 -1.05) (end -3.7 1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -3.7 1.05) (end -2.9 1.05) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 smd roundrect (at -2.0625 0) (size 2.775 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.15625)
(net 4 +3V3))
(pad 2 smd roundrect (at 2.0625 0) (size 2.775 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.15625)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_Elec_5x5.4.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_1206_3216Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1000)
(at 73 68.5 270)
(descr "Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D99DEEA)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference C111 (at 0 1.5 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 1u (at 0 1.82 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1))
(fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12))
(fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12))
(fp_line (start -2.28 1.12) (end -2.28 -1.12) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 -1.12) (end 2.28 -1.12) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 -1.12) (end 2.28 1.12) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 1.12) (end -2.28 1.12) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.8 0.8) (thickness 0.12)))
)
(pad 1 smd roundrect (at -1.4 0 270) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 5 +5V))
(pad 2 smd roundrect (at 1.4 0 270) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_1206_3216Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_1210_3225Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1011)
(at 93 77.5 180)
(descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8DCE92)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference C103 (at 0 2.5) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10u (at 0 2.28) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.8 0.8) (thickness 0.12)))
)
(fp_line (start 2.28 1.58) (end -2.28 1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 -1.58) (end 2.28 1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 -1.58) (end 2.28 -1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 1.58) (end -2.28 -1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.602064 1.36) (end 0.602064 1.36) (layer F.SilkS) (width 0.12))
(fp_line (start -0.602064 -1.36) (end 0.602064 -1.36) (layer F.SilkS) (width 0.12))
(fp_line (start 1.6 1.25) (end -1.6 1.25) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 -1.25) (end 1.6 1.25) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 -1.25) (end 1.6 -1.25) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 1.25) (end -1.6 -1.25) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 1.4 0 180) (size 1.25 2.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 3 +8V))
(pad 1 smd roundrect (at -1.4 0 180) (size 1.25 2.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5E01D917)
(at 85.5 96)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5DF4E0DE)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference C102 (at 3.47 0.1) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 22n (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 50 "Net-(C102-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 43 /OUT0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1033)
(at 41.64 105.61 270)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D793BDA)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C201 (at -0.11 1.64 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1044)
(at 44.5 105.5 90)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D8447D5)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C206 (at 0 -1.43 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 12p (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 63 "Net-(C206-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1055)
(at 52.5 105.5 270)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D841383)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C207 (at 3.5 0 270) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 12p (at 0 1.43 270) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0 270) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 64 "Net-(C207-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1066)
(at 32 72.5 180)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5DC2C880)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C209 (at 0 10.5) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1077)
(at 59 88.5)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D7A7211)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C211 (at 0.5 1.5) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 2u2 (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 65 "Net-(C211-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1088)
(at 50 80.5 270)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D9BD104)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C212 (at 0 1.5 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 66 "Net-(C212-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1099)
(at 42.7125 83.5 180)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D7A8470)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C213 (at -3.2875 0) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 2u2 (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 67 "Net-(C213-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5DEF10AA)
(at 57.17 102.03)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D7C8AA8)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C214 (at 0 1.43) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 100n (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 47 /Controller/VDDA))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF10BB)
(at 61 101)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D7C724B)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C216 (at 3.25 -1) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 1u (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 47 /Controller/VDDA))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5DEF10CC)
(at 30 95.5 180)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D7EAB78)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C217 (at 0.5 3.5) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 100n (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 6 /Controller/ENC1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5DEF10DD)
(at 30 100.5 180)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D7EB430)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C218 (at 0.5 1.5) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 100n (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 7 /Controller/ENC2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5DEF10FF)
(at 35.5 93)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D82D697)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C219 (at 0 1.43) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 100n (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 9 /Controller/SW1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1110)
(at 59.5 99)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D77625F)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C204 (at 0 -1.43) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1121)
(at 59 86.5)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D771354)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C205 (at 0 -1.5) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1132)
(at 38.5 99.5 90)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D775CE6)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C208 (at 0 -1.43 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_1210_3225Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1143)
(at 37 83.5 270)
(descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D8142D7)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C210 (at 0 -2.28 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10u (at 0 2.28 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -1.6 1.25) (end -1.6 -1.25) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 -1.25) (end 1.6 -1.25) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 -1.25) (end 1.6 1.25) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 1.25) (end -1.6 1.25) (layer F.Fab) (width 0.1))
(fp_line (start -0.602064 -1.36) (end 0.602064 -1.36) (layer F.SilkS) (width 0.12))
(fp_line (start -0.602064 1.36) (end 0.602064 1.36) (layer F.SilkS) (width 0.12))
(fp_line (start -2.28 1.58) (end -2.28 -1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 -1.58) (end 2.28 -1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 -1.58) (end 2.28 1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 1.58) (end -2.28 1.58) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.8 0.8) (thickness 0.12)))
)
(pad 1 smd roundrect (at -1.4 0 270) (size 1.25 2.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 4 +3V3))
(pad 2 smd roundrect (at 1.4 0 270) (size 1.25 2.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5DEF1187)
(at 51.5 98.5 270)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5D9BF43F)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C307 (at 0 1.43 90) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 1u (at 0 -1.43 90) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text user %R (at 0 0 90) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 8 /Controller/VREF))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5DEF11DC)
(at 65.5 87.5 270)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5D918057)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C311 (at -3.5 0 90) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(fp_text value 22n (at 0 -1.43 90) (layer B.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 10 /Frontend/FORCE+))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 11 /Frontend/FORCE-))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_1210_3225Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1220)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(at 80.75 76.75 90)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5D8F201B)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C316 (at 0 -2.28 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(fp_text value DNP (at 0 2.28 90) (layer F.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -1.6 1.25) (end -1.6 -1.25) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 -1.25) (end 1.6 -1.25) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 -1.25) (end 1.6 1.25) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 1.25) (end -1.6 1.25) (layer F.Fab) (width 0.1))
(fp_line (start -0.602064 -1.36) (end 0.602064 -1.36) (layer F.SilkS) (width 0.12))
(fp_line (start -0.602064 1.36) (end 0.602064 1.36) (layer F.SilkS) (width 0.12))
(fp_line (start -2.28 1.58) (end -2.28 -1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 -1.58) (end 2.28 -1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 -1.58) (end 2.28 1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 1.58) (end -2.28 1.58) (layer F.CrtYd) (width 0.05))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(fp_text user %R (at 0 0 90) (layer F.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 0.8 0.8) (thickness 0.12)))
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(pad 1 smd roundrect (at -1.4 0 90) (size 1.25 2.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 59 +3.3VA))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(pad 2 smd roundrect (at 1.4 0 90) (size 1.25 2.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module LED_SMD:LED_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF125D)
(at 25 56)
(descr "LED SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags diode)
(path /5D8E4FA2)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference D103 (at 1.65 1.66) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value LED (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.485 0.735) (end 0.8 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -1.485 -0.735) (end -1.485 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 -0.735) (end -1.485 -0.735) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.1) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.5 -0.4) (end -0.8 -0.1) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.5 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 44 /OUT3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 55 "Net-(D103-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/LED_SMD.3dshapes/LED_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module LED_SMD:LED_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1270)
(at 25 52)
(descr "LED SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags diode)
(path /5D8E4A3B)
(attr smd)
(fp_text reference D102 (at 4.55 -0.91) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value LED (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 0.8 -0.4) (end -0.5 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.5 -0.4) (end -0.8 -0.1) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.1) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.735) (end -1.485 -0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -1.485 -0.735) (end -1.485 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -1.485 0.735) (end 0.8 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 20 "Net-(D102-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 45 /OUT2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/LED_SMD.3dshapes/LED_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Diode_THT:Diode_Bridge_Round_D9.8mm (layer F.Cu) (tedit 5A142105) (tstamp 5DEF1281)
(at 45.5 40.5 90)
(descr "4-lead round diode bridge package, diameter 9.8mm, pin pitch 5.08mm, see http://www.vishay.com/docs/88769/woo5g.pdf")
(tags "diode bridge 9.8mm WOG pitch 5.08mm")
(path /5D6FE708)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference D101 (at 2.54 -3.302 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 2W005G-E4/51 (at 2.6035 8.509 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 3.81 2.54 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -1.524 -0.381) (end -1.524 5.461) (layer F.SilkS) (width 0.12))
(fp_line (start -1.397 5.461) (end -1.397 -0.381) (layer F.Fab) (width 0.12))
(fp_line (start -1.65 -2.61) (end 7.7 -2.61) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.65 -2.61) (end -1.65 7.7) (layer F.CrtYd) (width 0.05))
(fp_line (start 7.7 7.7) (end 7.7 -2.61) (layer F.CrtYd) (width 0.05))
(fp_line (start 7.7 7.7) (end -1.65 7.7) (layer F.CrtYd) (width 0.05))
(fp_arc (start 2.54 2.54) (end -0.381 -1.524) (angle 270) (layer F.SilkS) (width 0.12))
(fp_arc (start 2.54 2.54) (end -1.4 -0.38) (angle 287) (layer F.Fab) (width 0.12))
(pad 4 thru_hole oval (at 5.08 0 90) (size 2 2) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 53 "Net-(D101-Pad4)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 thru_hole oval (at 0 5.08 90) (size 2 2) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 54 "Net-(D101-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 thru_hole oval (at 5.08 5.08 90) (size 2 2) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(pad 1 thru_hole rect (at 0 0 90) (size 2 2) (drill 1) (layers *.Cu *.Mask)
(net 3 +8V))
(model ${KISYS3DMOD}/Diode_THT.3dshapes/Diode_Bridge_Round_D9.8mm.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module shimatta_tht:Schurter_0031.8201_20mm_Fuse (layer F.Cu) (tedit 5D6EB5E7) (tstamp 5DEF3D53)
(at 91 53 90)
(path /5D6ED850)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference F101 (at -14.5 0 180) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100mA/slow (at 0 -0.5 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -11.25 -2) (end -11.25 -5.5) (layer F.SilkS) (width 0.15))
(fp_line (start -11.25 -5.5) (end 11.25 -5.5) (layer F.SilkS) (width 0.15))
(fp_line (start 11.25 -5.5) (end 11.25 -2) (layer F.SilkS) (width 0.15))
(fp_line (start -11.25 2) (end -11.25 5.5) (layer F.SilkS) (width 0.15))
(fp_line (start -11.25 5.5) (end 11.25 5.5) (layer F.SilkS) (width 0.15))
(fp_line (start 11.25 5.5) (end 11.25 2) (layer F.SilkS) (width 0.15))
(pad 1 thru_hole circle (at -11.25 0 90) (size 3 3) (drill 1.3) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 22 /L_Trafo))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 thru_hole circle (at 11.25 0 90) (size 3 3) (drill 1.3) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 23 /L_IN))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
(module shimatta_tht:Schurter_0031.8201_20mm_Fuse (layer F.Cu) (tedit 5D6EB5E7) (tstamp 5E05A272)
(at 41.5 26)
(path /5D75937C)
Improve layout, change color of B.Silk and improve schematic
2020-01-12 14:56:58 +01:00
(fp_text reference F102 (at 8 -6.5) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 500mA/slow (at 0 -0.5) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 11.25 5.5) (end 11.25 2) (layer F.SilkS) (width 0.15))
(fp_line (start -11.25 5.5) (end 11.25 5.5) (layer F.SilkS) (width 0.15))
(fp_line (start -11.25 2) (end -11.25 5.5) (layer F.SilkS) (width 0.15))
(fp_line (start 11.25 -5.5) (end 11.25 -2) (layer F.SilkS) (width 0.15))
(fp_line (start -11.25 -5.5) (end 11.25 -5.5) (layer F.SilkS) (width 0.15))
(fp_line (start -11.25 -2) (end -11.25 -5.5) (layer F.SilkS) (width 0.15))
(pad 2 thru_hole circle (at 11.25 0) (size 3 3) (drill 1.3) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 56 "Net-(F102-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 thru_hole circle (at -11.25 0) (size 3 3) (drill 1.3) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 53 "Net-(D101-Pad4)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
(module Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF12C3)
(at 73 64 90)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags "inductor handsolder")
(path /5D99D868)
(attr smd)
(fp_text reference FB101 (at 0 -1.43 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value "600 Ohm" (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.171267 -0.51) (end 0.171267 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.171267 0.51) (end 0.171267 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.65 0.73) (end -1.65 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.65 -0.73) (end 1.65 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.65 -0.73) (end 1.65 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.65 0.73) (end -1.65 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.875 0 90) (size 1.05 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 5 +5V))
(pad 2 smd roundrect (at 0.875 0 90) (size 1.05 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 48 +5VL))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Inductor_SMD.3dshapes/L_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module MountingHole:MountingHole_3.2mm_M3_Pad_Via (layer F.Cu) (tedit 56DDBCCA) (tstamp 5DEF1303)
(at 91.5 102.5)
(descr "Mounting Hole 3.2mm, M3")
(tags "mounting hole 3.2mm m3")
(path /5D9DB41E)
(attr virtual)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference H101 (at 0 -4.2) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value M3 (at 0 4.2) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0.3 0) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_circle (center 0 0) (end 3.2 0) (layer Cmts.User) (width 0.15))
(fp_circle (center 0 0) (end 3.45 0) (layer F.CrtYd) (width 0.05))
(pad 1 thru_hole circle (at 0 0) (size 6.4 6.4) (drill 3.2) (layers *.Cu *.Mask)
(net 1 Earth))
(pad 1 thru_hole circle (at 2.4 0) (size 0.8 0.8) (drill 0.5) (layers *.Cu *.Mask)
(net 1 Earth))
(pad 1 thru_hole circle (at 1.697056 1.697056) (size 0.8 0.8) (drill 0.5) (layers *.Cu *.Mask)
(net 1 Earth))
(pad 1 thru_hole circle (at 0 2.4) (size 0.8 0.8) (drill 0.5) (layers *.Cu *.Mask)
(net 1 Earth))
(pad 1 thru_hole circle (at -1.697056 1.697056) (size 0.8 0.8) (drill 0.5) (layers *.Cu *.Mask)
(net 1 Earth))
(pad 1 thru_hole circle (at -2.4 0) (size 0.8 0.8) (drill 0.5) (layers *.Cu *.Mask)
(net 1 Earth))
(pad 1 thru_hole circle (at -1.697056 -1.697056) (size 0.8 0.8) (drill 0.5) (layers *.Cu *.Mask)
(net 1 Earth))
(pad 1 thru_hole circle (at 0 -2.4) (size 0.8 0.8) (drill 0.5) (layers *.Cu *.Mask)
(net 1 Earth))
(pad 1 thru_hole circle (at 1.697056 -1.697056) (size 0.8 0.8) (drill 0.5) (layers *.Cu *.Mask)
(net 1 Earth))
)
(module TerminalBlock:TerminalBlock_Altech_AK300-3_P5.00mm (layer F.Cu) (tedit 59FF0306) (tstamp 5DEF1386)
(at 91 25 270)
(descr "Altech AK300 terminal block, pitch 5.0mm, 45 degree angled, see http://www.mouser.com/ds/2/16/PCBMETRC-24178.pdf")
(tags "Altech AK300 terminal block pitch 5.0mm")
(path /5D6DCF6A)
(fp_text reference J101 (at -3.5 0 180) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value "230VAC IN" (at 4.95 7.3 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_arc (start -1.16 -4.66) (end -1.44 -4.14) (angle 104.2) (layer F.Fab) (width 0.1))
(fp_arc (start -0.04 -3.72) (end -1.64 -5.01) (angle 100) (layer F.Fab) (width 0.1))
(fp_arc (start 0.04 -6.08) (end 1.5 -4.13) (angle 75.5) (layer F.Fab) (width 0.1))
(fp_arc (start 1 -4.6) (end 1.51 -5.06) (angle 90.5) (layer F.Fab) (width 0.1))
(fp_arc (start 3.85 -4.66) (end 3.56 -4.14) (angle 104.2) (layer F.Fab) (width 0.1))
(fp_arc (start 4.96 -3.72) (end 3.36 -5.01) (angle 100) (layer F.Fab) (width 0.1))
(fp_arc (start 5.04 -6.08) (end 6.5 -4.13) (angle 75.5) (layer F.Fab) (width 0.1))
(fp_arc (start 6.01 -4.6) (end 6.51 -5.06) (angle 90.5) (layer F.Fab) (width 0.1))
(fp_arc (start 11.09 -4.6) (end 11.59 -5.06) (angle 90.5) (layer F.Fab) (width 0.1))
(fp_arc (start 10.12 -6.08) (end 11.58 -4.13) (angle 75.5) (layer F.Fab) (width 0.1))
(fp_arc (start 10.04 -3.72) (end 8.44 -5.01) (angle 100) (layer F.Fab) (width 0.1))
(fp_arc (start 8.93 -4.66) (end 8.64 -4.14) (angle 104.2) (layer F.Fab) (width 0.1))
(fp_line (start 13.42 6.46) (end -2.83 6.46) (layer F.CrtYd) (width 0.05))
(fp_line (start 13.42 6.46) (end 13.42 -6.48) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.83 -6.48) (end -2.83 6.46) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.83 -6.48) (end 13.42 -6.48) (layer F.CrtYd) (width 0.05))
(fp_line (start 3.34 -0.26) (end 6.64 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 -0.26) (end 3.34 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 7.02 -0.26) (end 6.64 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 1.64 -0.26) (end -1.67 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 -0.26) (end 1.64 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start -2.05 -0.26) (end -1.67 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start -1.51 -4.33) (end 1.53 -4.96) (layer F.Fab) (width 0.1))
(fp_line (start -1.64 -4.46) (end 1.41 -5.09) (layer F.Fab) (width 0.1))
(fp_line (start 3.49 -4.33) (end 6.54 -4.96) (layer F.Fab) (width 0.1))
(fp_line (start 3.36 -4.46) (end 6.41 -5.09) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 -5.98) (end -2.05 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start -2.05 -3.44) (end -2.05 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 -3.44) (end -2.05 -3.44) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 -3.44) (end 2.02 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 7.02 -3.44) (end 2.96 -3.44) (layer F.Fab) (width 0.1))
(fp_line (start 7.02 -5.98) (end 7.02 -3.44) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 -5.98) (end 7.02 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 -3.44) (end 2.96 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start -2.58 -3.19) (end -2.58 -6.23) (layer F.Fab) (width 0.1))
(fp_line (start -2.58 -3.19) (end 7.58 -3.19) (layer F.Fab) (width 0.1))
(fp_line (start -2.58 -0.65) (end -2.58 -3.19) (layer F.Fab) (width 0.1))
(fp_line (start -2.58 6.21) (end -2.58 -0.65) (layer F.Fab) (width 0.1))
(fp_line (start 6.64 0.5) (end 6.26 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 3.34 0.5) (end 3.72 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 1.64 0.5) (end 1.26 0.5) (layer F.Fab) (width 0.1))
(fp_line (start -1.67 0.5) (end -1.28 0.5) (layer F.Fab) (width 0.1))
(fp_line (start -1.67 3.67) (end -1.67 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 1.64 3.67) (end -1.67 3.67) (layer F.Fab) (width 0.1))
(fp_line (start 1.64 3.67) (end 1.64 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 3.34 3.67) (end 3.34 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 6.64 3.67) (end 3.34 3.67) (layer F.Fab) (width 0.1))
(fp_line (start 6.64 3.67) (end 6.64 0.5) (layer F.Fab) (width 0.1))
(fp_line (start -2.05 4.31) (end -2.05 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 4.31) (end 2.02 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 4.31) (end -2.05 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 7.02 4.31) (end 7.02 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 4.31) (end 2.96 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 4.31) (end 7.02 4.31) (layer F.Fab) (width 0.1))
(fp_line (start -2.05 6.21) (end 2.02 6.21) (layer F.Fab) (width 0.1))
(fp_line (start -2.58 6.21) (end -2.05 6.21) (layer F.Fab) (width 0.1))
(fp_line (start -2.05 -0.26) (end -2.05 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 6.21) (end 2.96 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 6.21) (end 2.02 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 7.02 6.21) (end 7.58 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 6.21) (end 7.02 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 7.02 -0.26) (end 7.02 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 6.21) (end 2.96 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 8.02 4.05) (end 8.02 5.2) (layer F.Fab) (width 0.1))
(fp_line (start 8.02 5.2) (end 8.02 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 3.72 2.53) (end 3.72 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 3.72 -0.26) (end 6.26 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 6.26 2.53) (end 6.26 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 3.72 2.53) (end 6.26 2.53) (layer F.Fab) (width 0.1))
(fp_line (start -1.28 2.53) (end -1.28 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start -1.28 -0.26) (end 1.26 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 1.26 2.53) (end 1.26 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start -1.28 2.53) (end 1.26 2.53) (layer F.Fab) (width 0.1))
(fp_line (start 8.8 2.53) (end 11.34 2.53) (layer F.Fab) (width 0.1))
(fp_line (start 11.34 2.53) (end 11.34 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 8.8 -0.26) (end 11.34 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 8.8 2.53) (end 8.8 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 -6.23) (end 12.66 -3.19) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 -6.23) (end 13.17 -6.23) (layer F.Fab) (width 0.1))
(fp_line (start 13.17 -6.23) (end 13.17 -1.41) (layer F.Fab) (width 0.1))
(fp_line (start 13.17 -1.41) (end 12.66 -1.66) (layer F.Fab) (width 0.1))
(fp_line (start 13.17 5.45) (end 12.66 5.2) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 5.2) (end 12.66 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 13.17 3.8) (end 12.66 4.05) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 4.05) (end 12.66 5.2) (layer F.Fab) (width 0.1))
(fp_line (start 13.17 3.8) (end 13.17 5.45) (layer F.Fab) (width 0.1))
(fp_line (start 8.04 6.21) (end 8.04 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 12.1 -0.26) (end 12.1 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 12.1 6.21) (end 12.66 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 8.04 4.31) (end 12.1 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 12.1 4.31) (end 12.1 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 11.72 3.67) (end 11.72 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 11.72 3.67) (end 8.42 3.67) (layer F.Fab) (width 0.1))
(fp_line (start 8.42 3.67) (end 8.42 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 8.42 0.5) (end 8.8 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 11.72 0.5) (end 11.34 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 -1.66) (end 12.66 -0.65) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 -0.65) (end 12.66 4.05) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 -3.19) (end 12.66 -1.66) (layer F.Fab) (width 0.1))
(fp_line (start 8.04 -3.44) (end 8.04 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 8.04 -5.98) (end 12.1 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 12.1 -5.98) (end 12.1 -3.44) (layer F.Fab) (width 0.1))
(fp_line (start 12.1 -3.44) (end 8.04 -3.44) (layer F.Fab) (width 0.1))
(fp_line (start 8.44 -4.46) (end 11.49 -5.09) (layer F.Fab) (width 0.1))
(fp_line (start 8.57 -4.33) (end 11.62 -4.96) (layer F.Fab) (width 0.1))
(fp_line (start 12.1 -0.26) (end 11.72 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 8.04 -0.26) (end 8.42 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 8.42 -0.26) (end 11.72 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start -2.58 -6.23) (end 12.66 -6.23) (layer F.Fab) (width 0.1))
(fp_line (start 7.58 -3.19) (end 12.6 -3.19) (layer F.Fab) (width 0.1))
(fp_line (start 12.09 6.21) (end 7.58 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 8.02 3.99) (end 8.02 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 -0.65) (end -2.52 -0.65) (layer F.Fab) (width 0.1))
(fp_line (start 13.25 -6.3) (end -2.65 -6.3) (layer F.SilkS) (width 0.12))
(fp_line (start 13.25 -1.25) (end 13.25 -6.3) (layer F.SilkS) (width 0.12))
(fp_line (start 12.75 -1.5) (end 13.25 -1.25) (layer F.SilkS) (width 0.12))
(fp_line (start 12.75 3.9) (end 12.75 -1.5) (layer F.SilkS) (width 0.12))
(fp_line (start 13.25 3.65) (end 12.75 3.9) (layer F.SilkS) (width 0.12))
(fp_line (start 13.25 5.65) (end 13.25 3.65) (layer F.SilkS) (width 0.12))
(fp_line (start 12.75 5.35) (end 13.25 5.65) (layer F.SilkS) (width 0.12))
(fp_line (start 12.75 6.3) (end 12.75 5.35) (layer F.SilkS) (width 0.12))
(fp_line (start -2.65 6.3) (end 12.75 6.3) (layer F.SilkS) (width 0.12))
(fp_line (start -2.65 -6.3) (end -2.65 6.3) (layer F.SilkS) (width 0.12))
(fp_text user %R (at 5 -2 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 3 thru_hole oval (at 10 0 270) (size 1.98 3.96) (drill 1.32) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 23 /L_IN))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 thru_hole oval (at 5 0 270) (size 1.98 3.96) (drill 1.32) (layers *.Cu *.Mask)
(net 1 Earth))
(pad 1 thru_hole rect (at 0 0 270) (size 1.98 3.96) (drill 1.32) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 24 /N_IN))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/TerminalBlock.3dshapes/TerminalBlock_Altech_AK300-3_P5.00mm.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module TerminalBlock:TerminalBlock_Altech_AK300-3_P5.00mm (layer F.Cu) (tedit 59FF0306) (tstamp 5DEF46B9)
(at 91.5 93 90)
(descr "Altech AK300 terminal block, pitch 5.0mm, 45 degree angled, see http://www.mouser.com/ds/2/16/PCBMETRC-24178.pdf")
(tags "Altech AK300 terminal block pitch 5.0mm")
(path /5D8B2F0A)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference J103 (at 5 -7.1 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value SSR_OUT (at 4.95 7.3 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 5 -2 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -2.65 -6.3) (end -2.65 6.3) (layer F.SilkS) (width 0.12))
(fp_line (start -2.65 6.3) (end 12.75 6.3) (layer F.SilkS) (width 0.12))
(fp_line (start 12.75 6.3) (end 12.75 5.35) (layer F.SilkS) (width 0.12))
(fp_line (start 12.75 5.35) (end 13.25 5.65) (layer F.SilkS) (width 0.12))
(fp_line (start 13.25 5.65) (end 13.25 3.65) (layer F.SilkS) (width 0.12))
(fp_line (start 13.25 3.65) (end 12.75 3.9) (layer F.SilkS) (width 0.12))
(fp_line (start 12.75 3.9) (end 12.75 -1.5) (layer F.SilkS) (width 0.12))
(fp_line (start 12.75 -1.5) (end 13.25 -1.25) (layer F.SilkS) (width 0.12))
(fp_line (start 13.25 -1.25) (end 13.25 -6.3) (layer F.SilkS) (width 0.12))
(fp_line (start 13.25 -6.3) (end -2.65 -6.3) (layer F.SilkS) (width 0.12))
(fp_line (start 12.66 -0.65) (end -2.52 -0.65) (layer F.Fab) (width 0.1))
(fp_line (start 8.02 3.99) (end 8.02 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 12.09 6.21) (end 7.58 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 7.58 -3.19) (end 12.6 -3.19) (layer F.Fab) (width 0.1))
(fp_line (start -2.58 -6.23) (end 12.66 -6.23) (layer F.Fab) (width 0.1))
(fp_line (start 8.42 -0.26) (end 11.72 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 8.04 -0.26) (end 8.42 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 12.1 -0.26) (end 11.72 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 8.57 -4.33) (end 11.62 -4.96) (layer F.Fab) (width 0.1))
(fp_line (start 8.44 -4.46) (end 11.49 -5.09) (layer F.Fab) (width 0.1))
(fp_line (start 12.1 -3.44) (end 8.04 -3.44) (layer F.Fab) (width 0.1))
(fp_line (start 12.1 -5.98) (end 12.1 -3.44) (layer F.Fab) (width 0.1))
(fp_line (start 8.04 -5.98) (end 12.1 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 8.04 -3.44) (end 8.04 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 -3.19) (end 12.66 -1.66) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 -0.65) (end 12.66 4.05) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 -1.66) (end 12.66 -0.65) (layer F.Fab) (width 0.1))
(fp_line (start 11.72 0.5) (end 11.34 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 8.42 0.5) (end 8.8 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 8.42 3.67) (end 8.42 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 11.72 3.67) (end 8.42 3.67) (layer F.Fab) (width 0.1))
(fp_line (start 11.72 3.67) (end 11.72 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 12.1 4.31) (end 12.1 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 8.04 4.31) (end 12.1 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 12.1 6.21) (end 12.66 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 12.1 -0.26) (end 12.1 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 8.04 6.21) (end 8.04 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 13.17 3.8) (end 13.17 5.45) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 4.05) (end 12.66 5.2) (layer F.Fab) (width 0.1))
(fp_line (start 13.17 3.8) (end 12.66 4.05) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 5.2) (end 12.66 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 13.17 5.45) (end 12.66 5.2) (layer F.Fab) (width 0.1))
(fp_line (start 13.17 -1.41) (end 12.66 -1.66) (layer F.Fab) (width 0.1))
(fp_line (start 13.17 -6.23) (end 13.17 -1.41) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 -6.23) (end 13.17 -6.23) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 -6.23) (end 12.66 -3.19) (layer F.Fab) (width 0.1))
(fp_line (start 8.8 2.53) (end 8.8 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 8.8 -0.26) (end 11.34 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 11.34 2.53) (end 11.34 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 8.8 2.53) (end 11.34 2.53) (layer F.Fab) (width 0.1))
(fp_line (start -1.28 2.53) (end 1.26 2.53) (layer F.Fab) (width 0.1))
(fp_line (start 1.26 2.53) (end 1.26 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start -1.28 -0.26) (end 1.26 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start -1.28 2.53) (end -1.28 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 3.72 2.53) (end 6.26 2.53) (layer F.Fab) (width 0.1))
(fp_line (start 6.26 2.53) (end 6.26 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 3.72 -0.26) (end 6.26 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 3.72 2.53) (end 3.72 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 8.02 5.2) (end 8.02 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 8.02 4.05) (end 8.02 5.2) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 6.21) (end 2.96 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 7.02 -0.26) (end 7.02 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 6.21) (end 7.02 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 7.02 6.21) (end 7.58 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 6.21) (end 2.02 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 6.21) (end 2.96 6.21) (layer F.Fab) (width 0.1))
(fp_line (start -2.05 -0.26) (end -2.05 4.31) (layer F.Fab) (width 0.1))
(fp_line (start -2.58 6.21) (end -2.05 6.21) (layer F.Fab) (width 0.1))
(fp_line (start -2.05 6.21) (end 2.02 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 4.31) (end 7.02 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 4.31) (end 2.96 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 7.02 4.31) (end 7.02 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 4.31) (end -2.05 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 4.31) (end 2.02 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start -2.05 4.31) (end -2.05 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 6.64 3.67) (end 6.64 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 6.64 3.67) (end 3.34 3.67) (layer F.Fab) (width 0.1))
(fp_line (start 3.34 3.67) (end 3.34 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 1.64 3.67) (end 1.64 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 1.64 3.67) (end -1.67 3.67) (layer F.Fab) (width 0.1))
(fp_line (start -1.67 3.67) (end -1.67 0.5) (layer F.Fab) (width 0.1))
(fp_line (start -1.67 0.5) (end -1.28 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 1.64 0.5) (end 1.26 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 3.34 0.5) (end 3.72 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 6.64 0.5) (end 6.26 0.5) (layer F.Fab) (width 0.1))
(fp_line (start -2.58 6.21) (end -2.58 -0.65) (layer F.Fab) (width 0.1))
(fp_line (start -2.58 -0.65) (end -2.58 -3.19) (layer F.Fab) (width 0.1))
(fp_line (start -2.58 -3.19) (end 7.58 -3.19) (layer F.Fab) (width 0.1))
(fp_line (start -2.58 -3.19) (end -2.58 -6.23) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 -3.44) (end 2.96 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 -5.98) (end 7.02 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 7.02 -5.98) (end 7.02 -3.44) (layer F.Fab) (width 0.1))
(fp_line (start 7.02 -3.44) (end 2.96 -3.44) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 -3.44) (end 2.02 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 -3.44) (end -2.05 -3.44) (layer F.Fab) (width 0.1))
(fp_line (start -2.05 -3.44) (end -2.05 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 -5.98) (end -2.05 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 3.36 -4.46) (end 6.41 -5.09) (layer F.Fab) (width 0.1))
(fp_line (start 3.49 -4.33) (end 6.54 -4.96) (layer F.Fab) (width 0.1))
(fp_line (start -1.64 -4.46) (end 1.41 -5.09) (layer F.Fab) (width 0.1))
(fp_line (start -1.51 -4.33) (end 1.53 -4.96) (layer F.Fab) (width 0.1))
(fp_line (start -2.05 -0.26) (end -1.67 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 -0.26) (end 1.64 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 1.64 -0.26) (end -1.67 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 7.02 -0.26) (end 6.64 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 -0.26) (end 3.34 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 3.34 -0.26) (end 6.64 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start -2.83 -6.48) (end 13.42 -6.48) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.83 -6.48) (end -2.83 6.46) (layer F.CrtYd) (width 0.05))
(fp_line (start 13.42 6.46) (end 13.42 -6.48) (layer F.CrtYd) (width 0.05))
(fp_line (start 13.42 6.46) (end -2.83 6.46) (layer F.CrtYd) (width 0.05))
(fp_arc (start 8.93 -4.66) (end 8.64 -4.14) (angle 104.2) (layer F.Fab) (width 0.1))
(fp_arc (start 10.04 -3.72) (end 8.44 -5.01) (angle 100) (layer F.Fab) (width 0.1))
(fp_arc (start 10.12 -6.08) (end 11.58 -4.13) (angle 75.5) (layer F.Fab) (width 0.1))
(fp_arc (start 11.09 -4.6) (end 11.59 -5.06) (angle 90.5) (layer F.Fab) (width 0.1))
(fp_arc (start 6.01 -4.6) (end 6.51 -5.06) (angle 90.5) (layer F.Fab) (width 0.1))
(fp_arc (start 5.04 -6.08) (end 6.5 -4.13) (angle 75.5) (layer F.Fab) (width 0.1))
(fp_arc (start 4.96 -3.72) (end 3.36 -5.01) (angle 100) (layer F.Fab) (width 0.1))
(fp_arc (start 3.85 -4.66) (end 3.56 -4.14) (angle 104.2) (layer F.Fab) (width 0.1))
(fp_arc (start 1 -4.6) (end 1.51 -5.06) (angle 90.5) (layer F.Fab) (width 0.1))
(fp_arc (start 0.04 -6.08) (end 1.5 -4.13) (angle 75.5) (layer F.Fab) (width 0.1))
(fp_arc (start -0.04 -3.72) (end -1.64 -5.01) (angle 100) (layer F.Fab) (width 0.1))
(fp_arc (start -1.16 -4.66) (end -1.44 -4.14) (angle 104.2) (layer F.Fab) (width 0.1))
(pad 1 thru_hole rect (at 0 0 90) (size 1.98 3.96) (drill 1.32) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 57 "Net-(J103-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 thru_hole oval (at 5 0 90) (size 1.98 3.96) (drill 1.32) (layers *.Cu *.Mask)
(net 1 Earth))
(pad 3 thru_hole oval (at 10 0 90) (size 1.98 3.96) (drill 1.32) (layers *.Cu *.Mask)
(net 3 +8V))
(model ${KISYS3DMOD}/TerminalBlock.3dshapes/TerminalBlock_Altech_AK300-3_P5.00mm.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical (layer F.Cu) (tedit 59FED5CC) (tstamp 5DEF1423)
(at 67.5 86.5)
(descr "Through hole straight pin header, 2x02, 2.54mm pitch, double rows")
(tags "Through hole pin header THT 2x02 2.54mm double row")
(path /5DB7154A)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference J105 (at -3.5 4) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value PT1000 (at 1.27 4.87) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 0 -1.27) (end 3.81 -1.27) (layer F.Fab) (width 0.1))
(fp_line (start 3.81 -1.27) (end 3.81 3.81) (layer F.Fab) (width 0.1))
(fp_line (start 3.81 3.81) (end -1.27 3.81) (layer F.Fab) (width 0.1))
(fp_line (start -1.27 3.81) (end -1.27 0) (layer F.Fab) (width 0.1))
(fp_line (start -1.27 0) (end 0 -1.27) (layer F.Fab) (width 0.1))
(fp_line (start -1.33 3.87) (end 3.87 3.87) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 1.27) (end -1.33 3.87) (layer F.SilkS) (width 0.12))
(fp_line (start 3.87 -1.33) (end 3.87 3.87) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 1.27) (end 1.27 1.27) (layer F.SilkS) (width 0.12))
(fp_line (start 1.27 1.27) (end 1.27 -1.33) (layer F.SilkS) (width 0.12))
(fp_line (start 1.27 -1.33) (end 3.87 -1.33) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 0) (end -1.33 -1.33) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 -1.33) (end 0 -1.33) (layer F.SilkS) (width 0.12))
(fp_line (start -1.8 -1.8) (end -1.8 4.35) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.8 4.35) (end 4.35 4.35) (layer F.CrtYd) (width 0.05))
(fp_line (start 4.35 4.35) (end 4.35 -1.8) (layer F.CrtYd) (width 0.05))
(fp_line (start 4.35 -1.8) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 1.27 1.27 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 10 /Frontend/FORCE+))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 thru_hole oval (at 2.54 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 12 /Frontend/SENS+))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 13 /Frontend/SENS-))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 4 thru_hole oval (at 2.54 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 11 /Frontend/FORCE-))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_2x02_P2.54mm_Vertical.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Connector:Tag-Connect_TC2050-IDC-FP_2x05_P1.27mm_Vertical (layer F.Cu) (tedit 5E0126DB) (tstamp 5DEF1467)
(at 40 72.5)
(descr "Tag-Connect programming header; http://www.tag-connect.com/Materials/TC2050-IDC-430%20Datasheet.pdf")
(tags "tag connect programming header pogo pins")
(path /5D77EC9D/5D75F6EB)
(attr virtual)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference J202 (at 5.5 0 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10PIN_JTAG_SWD (at 0 -4.8) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -3.175 1.27) (end -3.175 0.635) (layer F.SilkS) (width 0.12))
(fp_line (start -2.54 1.27) (end -3.175 1.27) (layer F.SilkS) (width 0.12))
(fp_line (start -5.5 4.25) (end -5.5 -4.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 4.75 4.25) (end -5.5 4.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 4.75 -4.25) (end 4.75 4.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -5.5 -4.25) (end 4.75 -4.25) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -2.54 0.635) (end -2.54 -0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start 2.54 0.635) (end -2.54 0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start 2.54 -0.635) (end 2.54 0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start -2.54 -0.635) (end 2.54 -0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start -2.54 0.635) (end -1.27 -0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start -2.54 0) (end -1.905 -0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start -1.905 0.635) (end -0.635 -0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start -1.27 0.635) (end 0 -0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start 1.905 0.635) (end 2.54 0) (layer Dwgs.User) (width 0.1))
(fp_text user KEEPOUT (at 0 0) (layer Cmts.User)
(effects (font (size 0.4 0.4) (thickness 0.07)))
)
(fp_line (start -0.635 0.635) (end 0.635 -0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start 0 0.635) (end 1.27 -0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start 0.635 0.635) (end 1.905 -0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start 1.27 0.635) (end 2.54 -0.635) (layer Dwgs.User) (width 0.1))
(pad "" np_thru_hole circle (at 3.81 -1.016) (size 0.9906 0.9906) (drill 0.9906) (layers *.Cu *.Mask))
(pad "" np_thru_hole circle (at 3.81 1.016) (size 0.9906 0.9906) (drill 0.9906) (layers *.Cu *.Mask))
(pad "" np_thru_hole circle (at -3.81 0) (size 0.9906 0.9906) (drill 0.9906) (layers *.Cu *.Mask))
(pad 1 connect circle (at -2.54 0.635) (size 0.7874 0.7874) (layers F.Cu F.Mask)
(net 4 +3V3))
(pad 2 connect circle (at -1.27 0.635) (size 0.7874 0.7874) (layers F.Cu F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 29 /Controller/SWDIO))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 connect circle (at 0 0.635) (size 0.7874 0.7874) (layers F.Cu F.Mask)
(net 2 GND) (zone_connect 2))
(pad 4 connect circle (at 1.27 0.635) (size 0.7874 0.7874) (layers F.Cu F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 30 /Controller/SWCLK))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 5 connect circle (at 2.54 0.635) (size 0.7874 0.7874) (layers F.Cu F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 75 "Net-(J202-Pad5)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 6 connect circle (at 2.54 -0.635) (size 0.7874 0.7874) (layers F.Cu F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 76 "Net-(J202-Pad6)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 7 connect circle (at 1.27 -0.635) (size 0.7874 0.7874) (layers F.Cu F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 31 /Controller/PC_RX))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 8 connect circle (at 0 -0.635) (size 0.7874 0.7874) (layers F.Cu F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 77 "Net-(J202-Pad8)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 9 connect circle (at -1.27 -0.635) (size 0.7874 0.7874) (layers F.Cu F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 32 /Controller/PC_TX))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 10 connect circle (at -2.54 -0.635) (size 0.7874 0.7874) (layers F.Cu F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 33 /Controller/~RST))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad "" np_thru_hole circle (at -3.81 -2.54) (size 2.3749 2.3749) (drill 2.3749) (layers *.Cu *.Mask))
(pad "" np_thru_hole circle (at -3.81 2.54) (size 2.3749 2.3749) (drill 2.3749) (layers *.Cu *.Mask))
(pad "" np_thru_hole circle (at 1.905 2.54) (size 2.3749 2.3749) (drill 2.3749) (layers *.Cu *.Mask))
(pad "" np_thru_hole circle (at 1.905 -2.54) (size 2.3749 2.3749) (drill 2.3749) (layers *.Cu *.Mask))
)
(module Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical (layer F.Cu) (tedit 59FED5CC) (tstamp 5DEF1497)
(at 32.5 90.34)
(descr "Through hole straight pin header, 1x05, 2.54mm pitch, single row")
(tags "Through hole pin header THT 1x05 2.54mm single row")
(path /5D77EC9D/5D93C5CB)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference J203 (at 0 -2.33) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value RotaryEncoder (at 0 12.49) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer F.Fab) (width 0.1))
(fp_line (start 1.27 -1.27) (end 1.27 11.43) (layer F.Fab) (width 0.1))
(fp_line (start 1.27 11.43) (end -1.27 11.43) (layer F.Fab) (width 0.1))
(fp_line (start -1.27 11.43) (end -1.27 -0.635) (layer F.Fab) (width 0.1))
(fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer F.Fab) (width 0.1))
(fp_line (start -1.33 11.49) (end 1.33 11.49) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 1.27) (end -1.33 11.49) (layer F.SilkS) (width 0.12))
(fp_line (start 1.33 1.27) (end 1.33 11.49) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 1.27) (end 1.33 1.27) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 0) (end -1.33 -1.33) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 -1.33) (end 0 -1.33) (layer F.SilkS) (width 0.12))
(fp_line (start -1.8 -1.8) (end -1.8 11.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.8 11.95) (end 1.8 11.95) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.8 11.95) (end 1.8 -1.8) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 5.08 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(pad 2 thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 9 /Controller/SW1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 6 /Controller/ENC1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 4 thru_hole oval (at 0 7.62) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(pad 5 thru_hole oval (at 0 10.16) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 7 /Controller/ENC2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x05_P2.54mm_Vertical.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5DEF14A8)
(at 61 103)
(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
(tags "inductor handsolder")
(path /5D77EC9D/5D7C535D)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference L201 (at -3.5 0) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100nH (at 0 1.65) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)))
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12))
(fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12))
(fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1))
(fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1))
(fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1))
(fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 1.025 0) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
(net 4 +3V3))
(pad 1 smd roundrect (at -1.025 0) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 47 /Controller/VDDA))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Inductor_SMD.3dshapes/L_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical (layer F.Cu) (tedit 59FED5CC) (tstamp 5DEF14CF)
(at 66.5 74 180)
(descr "Through hole straight pin header, 1x02, 2.54mm pitch, single row")
(tags "Through hole pin header THT 1x02 2.54mm single row")
(path /5D891662)
(fp_text reference LS101 (at 2 1.5 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value Buzzer (at 0 4.87) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer F.Fab) (width 0.1))
(fp_line (start 1.27 -1.27) (end 1.27 3.81) (layer F.Fab) (width 0.1))
(fp_line (start 1.27 3.81) (end -1.27 3.81) (layer F.Fab) (width 0.1))
(fp_line (start -1.27 3.81) (end -1.27 -0.635) (layer F.Fab) (width 0.1))
(fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer F.Fab) (width 0.1))
(fp_line (start -1.33 3.87) (end 1.33 3.87) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 1.27) (end -1.33 3.87) (layer F.SilkS) (width 0.12))
(fp_line (start 1.33 1.27) (end 1.33 3.87) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 1.27) (end 1.33 1.27) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 0) (end -1.33 -1.33) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 -1.33) (end 0 -1.33) (layer F.SilkS) (width 0.12))
(fp_line (start -1.8 -1.8) (end -1.8 4.35) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.8 4.35) (end 1.8 4.35) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.8 4.35) (end 1.8 -1.8) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 1.27 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 thru_hole rect (at 0 0 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 34 "Net-(LS101-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 thru_hole oval (at 0 2.54 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 5 +5V))
(model ${KISYS3DMOD}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x02_P2.54mm_Vertical.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Package_TO_SOT_SMD:SOT-23 (layer B.Cu) (tedit 5A02FF57) (tstamp 5DEF14E4)
(at 87 93)
(descr "SOT-23, Standard")
(tags SOT-23)
(path /5D881694)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference Q102 (at -2.5 0 90) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value BSS123 (at 0 -2.5) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text user %R (at 0 0 -90) (layer B.Fab)
(effects (font (size 0.5 0.5) (thickness 0.075)) (justify mirror))
)
(fp_line (start -0.7 0.95) (end -0.7 -1.5) (layer B.Fab) (width 0.1))
(fp_line (start -0.15 1.52) (end 0.7 1.52) (layer B.Fab) (width 0.1))
(fp_line (start -0.7 0.95) (end -0.15 1.52) (layer B.Fab) (width 0.1))
(fp_line (start 0.7 1.52) (end 0.7 -1.52) (layer B.Fab) (width 0.1))
(fp_line (start -0.7 -1.52) (end 0.7 -1.52) (layer B.Fab) (width 0.1))
(fp_line (start 0.76 -1.58) (end 0.76 -0.65) (layer B.SilkS) (width 0.12))
(fp_line (start 0.76 1.58) (end 0.76 0.65) (layer B.SilkS) (width 0.12))
(fp_line (start -1.7 1.75) (end 1.7 1.75) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.7 1.75) (end 1.7 -1.75) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.7 -1.75) (end -1.7 -1.75) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.7 -1.75) (end -1.7 1.75) (layer B.CrtYd) (width 0.05))
(fp_line (start 0.76 1.58) (end -1.4 1.58) (layer B.SilkS) (width 0.12))
(fp_line (start 0.76 -1.58) (end -0.7 -1.58) (layer B.SilkS) (width 0.12))
(pad 1 smd rect (at -1 0.95) (size 0.9 0.8) (layers B.Cu B.Paste B.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 50 "Net-(C102-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd rect (at -1 -0.95) (size 0.9 0.8) (layers B.Cu B.Paste B.Mask)
(net 2 GND))
(pad 3 smd rect (at 1 0) (size 0.9 0.8) (layers B.Cu B.Paste B.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 57 "Net-(J103-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Package_TO_SOT_SMD:SOT-23 (layer F.Cu) (tedit 5A02FF57) (tstamp 5DEF14F9)
(at 67 78.5 90)
(descr "SOT-23, Standard")
(tags SOT-23)
(path /5D8AFFC1)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference Q101 (at 0 -2.5 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value BSS123 (at 0 2.5 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 0.76 1.58) (end -0.7 1.58) (layer F.SilkS) (width 0.12))
(fp_line (start 0.76 -1.58) (end -1.4 -1.58) (layer F.SilkS) (width 0.12))
(fp_line (start -1.7 1.75) (end -1.7 -1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.7 1.75) (end -1.7 1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.7 -1.75) (end 1.7 1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.7 -1.75) (end 1.7 -1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start 0.76 -1.58) (end 0.76 -0.65) (layer F.SilkS) (width 0.12))
(fp_line (start 0.76 1.58) (end 0.76 0.65) (layer F.SilkS) (width 0.12))
(fp_line (start -0.7 1.52) (end 0.7 1.52) (layer F.Fab) (width 0.1))
(fp_line (start 0.7 -1.52) (end 0.7 1.52) (layer F.Fab) (width 0.1))
(fp_line (start -0.7 -0.95) (end -0.15 -1.52) (layer F.Fab) (width 0.1))
(fp_line (start -0.15 -1.52) (end 0.7 -1.52) (layer F.Fab) (width 0.1))
(fp_line (start -0.7 -0.95) (end -0.7 1.5) (layer F.Fab) (width 0.1))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.075)))
)
(pad 3 smd rect (at 1 0 90) (size 0.9 0.8) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 34 "Net-(LS101-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd rect (at -1 0.95 90) (size 0.9 0.8) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad 1 smd rect (at -1 -0.95 90) (size 0.9 0.8) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 58 "Net-(Q101-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF150A)
(at 22.5 20.5 90)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D70EFF3)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference R106 (at 0 -1.43 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 1M (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 1 Earth))
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5DEF151B)
(at 85.5 98)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D88AD1A)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference R103 (at 3.27 0.05) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 10k (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 50 "Net-(C102-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 43 /OUT0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF152C)
(at 66 82 90)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8BE522)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference R101 (at -1 -1.43 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10k (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 46 /OUT1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 58 "Net-(Q101-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E01540C)
(at 25 49.5)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8F3F07)
(attr smd)
(fp_text reference R104 (at 0.07 -1.5) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 1k5 (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 20 "Net-(D102-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF154E)
(at 29 54.5)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8F3AEF)
(attr smd)
(fp_text reference R105 (at 0.5 -1.5) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 1k5 (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 55 "Net-(D103-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5DEF155F)
(at 87.5 88 270)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8FC0CC)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference R102 (at 0 1.43 90) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 22k (at 0 -1.43 90) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 3 +8V))
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 57 "Net-(J103-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5DEF1570)
(at 48.5 105.5)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5D855B79)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R201 (at 0 1.43) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 1M (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 64 "Net-(C207-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 63 "Net-(C206-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF15A3)
(at 32 69.5 180)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5DDD574C)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R204 (at 0 10) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10k (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 15 /Controller/SDIO_D0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF15B4)
(at 32 71 180)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5DDD5A92)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R205 (at 0 10.25) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10k (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 16 /Controller/SDIO_CLK))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF15C5)
(at 32 74 180)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5DDD5F3A)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R206 (at 0 10.75) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10k (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 17 /Controller/SDIO_CMD))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF15D6)
(at 32 75.5 180)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5DDD7B84)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R207 (at 0 11) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10k (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 18 /Controller/SDIO_D3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF15E7)
(at 32 77 180)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5DDD7F38)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R208 (at 0 11.25) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10k (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 19 /Controller/SDIO_D2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5DEF15F8)
(at 38.5 69.2125 270)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5D7B48C6)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R209 (at 3.2875 0 90) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 10k (at 0 -1.43 90) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 33 /Controller/~RST))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF1609)
(at 37.5 78)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5DE7DF04)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R210 (at 3.5 0) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10k (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 29 /Controller/SWDIO))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF161A)
(at 37.5 80)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5DE7B2A7)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R211 (at 3.5 0) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10k (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 30 /Controller/SWCLK))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5DEF163C)
(at 30 93.5)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5D7D2B75)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R212 (at -0.5 3.5) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 10k (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 6 /Controller/ENC1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5DEF164D)
(at 30 102.5)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5D7D322F)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R213 (at -0.5 1.43) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 10k (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 7 /Controller/ENC2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3D71B1)
(at 81 80.25 180)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5D929598)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R303 (at 0.75 -2.75 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(fp_text value 150 (at 0 1.43) (layer F.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(fp_text user %R (at 0 0) (layer F.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 59 +3.3VA))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 68 "Net-(C303-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5E01C7D3)
(at 53 98.5 90)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5D9B187D)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R308 (at 3.5 0 270) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(fp_text value 0 (at 0 -1.43 270) (layer B.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text user %R (at 0 0 270) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 68 "Net-(C303-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 8 /Controller/VREF))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Potentiometer_THT:Potentiometer_Bourns_3266X_Horizontal (layer F.Cu) (tedit 5A3D4994) (tstamp 5DEF177D)
(at 23.5 59)
(descr "Potentiometer, horizontal, Bourns 3266X, https://www.bourns.com/docs/Product-Datasheets/3266.pdf")
(tags "Potentiometer horizontal Bourns 3266X")
(path /5D77EC9D/5D944119)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference RV201 (at -2.5 4.5 180) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10k (at -3.3 4.73) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -5.895 -1.02) (end -5.895 3.48) (layer F.Fab) (width 0.1))
(fp_line (start -5.895 3.48) (end 0.815 3.48) (layer F.Fab) (width 0.1))
(fp_line (start 0.815 3.48) (end 0.815 -1.02) (layer F.Fab) (width 0.1))
(fp_line (start 0.815 -1.02) (end -5.895 -1.02) (layer F.Fab) (width 0.1))
(fp_line (start -7.415 1.32) (end -7.415 3.1) (layer F.Fab) (width 0.1))
(fp_line (start -7.415 3.1) (end -5.895 3.1) (layer F.Fab) (width 0.1))
(fp_line (start -5.895 3.1) (end -5.895 1.32) (layer F.Fab) (width 0.1))
(fp_line (start -5.895 1.32) (end -7.415 1.32) (layer F.Fab) (width 0.1))
(fp_line (start -7.415 2.21) (end -6.655 2.21) (layer F.Fab) (width 0.1))
(fp_line (start -6.015 -1.14) (end 0.935 -1.14) (layer F.SilkS) (width 0.12))
(fp_line (start -6.015 3.6) (end 0.935 3.6) (layer F.SilkS) (width 0.12))
(fp_line (start -6.015 -1.14) (end -6.015 -0.495) (layer F.SilkS) (width 0.12))
(fp_line (start -6.015 0.495) (end -6.015 3.6) (layer F.SilkS) (width 0.12))
(fp_line (start 0.935 -1.14) (end 0.935 -0.495) (layer F.SilkS) (width 0.12))
(fp_line (start 0.935 0.495) (end 0.935 3.6) (layer F.SilkS) (width 0.12))
(fp_line (start -7.535 1.2) (end -6.016 1.2) (layer F.SilkS) (width 0.12))
(fp_line (start -7.535 3.22) (end -6.016 3.22) (layer F.SilkS) (width 0.12))
(fp_line (start -7.535 1.2) (end -7.535 3.22) (layer F.SilkS) (width 0.12))
(fp_line (start -6.016 1.2) (end -6.016 3.22) (layer F.SilkS) (width 0.12))
(fp_line (start -7.535 2.21) (end -6.776 2.21) (layer F.SilkS) (width 0.12))
(fp_line (start -7.7 -1.3) (end -7.7 3.75) (layer F.CrtYd) (width 0.05))
(fp_line (start -7.7 3.75) (end 1.1 3.75) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.1 3.75) (end 1.1 -1.3) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.1 -1.3) (end -7.7 -1.3) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at -2.54 1.23) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 thru_hole circle (at 0 0) (size 1.44 1.44) (drill 0.8) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 66 "Net-(C212-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 thru_hole circle (at -2.54 2.54) (size 1.44 1.44) (drill 0.8) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 35 /Controller/LCD_VO))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 thru_hole circle (at -5.08 0) (size 1.44 1.44) (drill 0.8) (layers *.Cu *.Mask)
(net 2 GND))
(model ${KISYS3DMOD}/Potentiometer_THT.3dshapes/Potentiometer_Bourns_3266X_Horizontal.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Package_TO_SOT_SMD:TO-252-2 (layer F.Cu) (tedit 5A70A390) (tstamp 5DEF17B3)
(at 35 49 270)
(descr "TO-252 / DPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO252/PG-TO252-3-1/")
(tags "DPAK TO-252 DPAK-3 TO-252-3 SOT-428")
(path /5D71A1E5)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference U103 (at -3.85 -4.2 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value AZ1117-3.3 (at 0 4.5 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 5.55 -3.5) (end -5.55 -3.5) (layer F.CrtYd) (width 0.05))
(fp_line (start 5.55 3.5) (end 5.55 -3.5) (layer F.CrtYd) (width 0.05))
(fp_line (start -5.55 3.5) (end 5.55 3.5) (layer F.CrtYd) (width 0.05))
(fp_line (start -5.55 -3.5) (end -5.55 3.5) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.47 3.18) (end -3.57 3.18) (layer F.SilkS) (width 0.12))
(fp_line (start -2.47 3.45) (end -2.47 3.18) (layer F.SilkS) (width 0.12))
(fp_line (start -0.97 3.45) (end -2.47 3.45) (layer F.SilkS) (width 0.12))
(fp_line (start -2.47 -3.18) (end -5.3 -3.18) (layer F.SilkS) (width 0.12))
(fp_line (start -2.47 -3.45) (end -2.47 -3.18) (layer F.SilkS) (width 0.12))
(fp_line (start -0.97 -3.45) (end -2.47 -3.45) (layer F.SilkS) (width 0.12))
(fp_line (start -4.97 2.655) (end -2.27 2.655) (layer F.Fab) (width 0.1))
(fp_line (start -4.97 1.905) (end -4.97 2.655) (layer F.Fab) (width 0.1))
(fp_line (start -2.27 1.905) (end -4.97 1.905) (layer F.Fab) (width 0.1))
(fp_line (start -4.97 -1.905) (end -2.27 -1.905) (layer F.Fab) (width 0.1))
(fp_line (start -4.97 -2.655) (end -4.97 -1.905) (layer F.Fab) (width 0.1))
(fp_line (start -1.865 -2.655) (end -4.97 -2.655) (layer F.Fab) (width 0.1))
(fp_line (start -1.27 -3.25) (end 3.95 -3.25) (layer F.Fab) (width 0.1))
(fp_line (start -2.27 -2.25) (end -1.27 -3.25) (layer F.Fab) (width 0.1))
(fp_line (start -2.27 3.25) (end -2.27 -2.25) (layer F.Fab) (width 0.1))
(fp_line (start 3.95 3.25) (end -2.27 3.25) (layer F.Fab) (width 0.1))
(fp_line (start 3.95 -3.25) (end 3.95 3.25) (layer F.Fab) (width 0.1))
(fp_line (start 4.95 2.7) (end 3.95 2.7) (layer F.Fab) (width 0.1))
(fp_line (start 4.95 -2.7) (end 4.95 2.7) (layer F.Fab) (width 0.1))
(fp_line (start 3.95 -2.7) (end 4.95 -2.7) (layer F.Fab) (width 0.1))
(pad "" smd rect (at 0.425 1.525 270) (size 3.05 2.75) (layers F.Paste))
(pad "" smd rect (at 3.775 -1.525 270) (size 3.05 2.75) (layers F.Paste))
(pad "" smd rect (at 0.425 -1.525 270) (size 3.05 2.75) (layers F.Paste))
(pad "" smd rect (at 3.775 1.525 270) (size 3.05 2.75) (layers F.Paste))
(pad 2 smd rect (at 2.1 0 270) (size 6.4 5.8) (layers F.Cu F.Mask)
(net 4 +3V3))
(pad 3 smd rect (at -4.2 2.28 270) (size 2.2 1.2) (layers F.Cu F.Paste F.Mask)
(net 3 +8V))
(pad 1 smd rect (at -4.2 -2.28 270) (size 2.2 1.2) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/TO-252-2.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Package_TO_SOT_SMD:TO-252-2 (layer F.Cu) (tedit 5A70A390) (tstamp 5DEF17D7)
(at 78.5 66 90)
(descr "TO-252 / DPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO252/PG-TO252-3-1/")
(tags "DPAK TO-252 DPAK-3 TO-252-3 SOT-428")
(path /5D982620)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference U104 (at 2.5 -4 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value AZ1117-5.0 (at 0 4.5 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 3.95 -2.7) (end 4.95 -2.7) (layer F.Fab) (width 0.1))
(fp_line (start 4.95 -2.7) (end 4.95 2.7) (layer F.Fab) (width 0.1))
(fp_line (start 4.95 2.7) (end 3.95 2.7) (layer F.Fab) (width 0.1))
(fp_line (start 3.95 -3.25) (end 3.95 3.25) (layer F.Fab) (width 0.1))
(fp_line (start 3.95 3.25) (end -2.27 3.25) (layer F.Fab) (width 0.1))
(fp_line (start -2.27 3.25) (end -2.27 -2.25) (layer F.Fab) (width 0.1))
(fp_line (start -2.27 -2.25) (end -1.27 -3.25) (layer F.Fab) (width 0.1))
(fp_line (start -1.27 -3.25) (end 3.95 -3.25) (layer F.Fab) (width 0.1))
(fp_line (start -1.865 -2.655) (end -4.97 -2.655) (layer F.Fab) (width 0.1))
(fp_line (start -4.97 -2.655) (end -4.97 -1.905) (layer F.Fab) (width 0.1))
(fp_line (start -4.97 -1.905) (end -2.27 -1.905) (layer F.Fab) (width 0.1))
(fp_line (start -2.27 1.905) (end -4.97 1.905) (layer F.Fab) (width 0.1))
(fp_line (start -4.97 1.905) (end -4.97 2.655) (layer F.Fab) (width 0.1))
(fp_line (start -4.97 2.655) (end -2.27 2.655) (layer F.Fab) (width 0.1))
(fp_line (start -0.97 -3.45) (end -2.47 -3.45) (layer F.SilkS) (width 0.12))
(fp_line (start -2.47 -3.45) (end -2.47 -3.18) (layer F.SilkS) (width 0.12))
(fp_line (start -2.47 -3.18) (end -5.3 -3.18) (layer F.SilkS) (width 0.12))
(fp_line (start -0.97 3.45) (end -2.47 3.45) (layer F.SilkS) (width 0.12))
(fp_line (start -2.47 3.45) (end -2.47 3.18) (layer F.SilkS) (width 0.12))
(fp_line (start -2.47 3.18) (end -3.57 3.18) (layer F.SilkS) (width 0.12))
(fp_line (start -5.55 -3.5) (end -5.55 3.5) (layer F.CrtYd) (width 0.05))
(fp_line (start -5.55 3.5) (end 5.55 3.5) (layer F.CrtYd) (width 0.05))
(fp_line (start 5.55 3.5) (end 5.55 -3.5) (layer F.CrtYd) (width 0.05))
(fp_line (start 5.55 -3.5) (end -5.55 -3.5) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 smd rect (at -4.2 -2.28 90) (size 2.2 1.2) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad 3 smd rect (at -4.2 2.28 90) (size 2.2 1.2) (layers F.Cu F.Paste F.Mask)
(net 3 +8V))
(pad 2 smd rect (at 2.1 0 90) (size 6.4 5.8) (layers F.Cu F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 48 +5VL))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad "" smd rect (at 3.775 1.525 90) (size 3.05 2.75) (layers F.Paste))
(pad "" smd rect (at 0.425 -1.525 90) (size 3.05 2.75) (layers F.Paste))
(pad "" smd rect (at 3.775 -1.525 90) (size 3.05 2.75) (layers F.Paste))
(pad "" smd rect (at 0.425 1.525 90) (size 3.05 2.75) (layers F.Paste))
(model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/TO-252-2.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm (layer F.Cu) (tedit 5C97300E) (tstamp 5DEF1826)
(at 57.5 75.5 180)
(descr "SOIC, 20 Pin (JEDEC MS-013AC, https://www.analog.com/media/en/package-pcb-resources/package/233848rw_20.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py")
(tags "SOIC SO")
(path /5D77EC9D/5D90FF0A)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference U201 (at 0 -7.35) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 74HCT244 (at 0 7.35) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 0 6.51) (end 3.86 6.51) (layer F.SilkS) (width 0.12))
(fp_line (start 3.86 6.51) (end 3.86 6.275) (layer F.SilkS) (width 0.12))
(fp_line (start 0 6.51) (end -3.86 6.51) (layer F.SilkS) (width 0.12))
(fp_line (start -3.86 6.51) (end -3.86 6.275) (layer F.SilkS) (width 0.12))
(fp_line (start 0 -6.51) (end 3.86 -6.51) (layer F.SilkS) (width 0.12))
(fp_line (start 3.86 -6.51) (end 3.86 -6.275) (layer F.SilkS) (width 0.12))
(fp_line (start 0 -6.51) (end -3.86 -6.51) (layer F.SilkS) (width 0.12))
(fp_line (start -3.86 -6.51) (end -3.86 -6.275) (layer F.SilkS) (width 0.12))
(fp_line (start -3.86 -6.275) (end -5.675 -6.275) (layer F.SilkS) (width 0.12))
(fp_line (start -2.75 -6.4) (end 3.75 -6.4) (layer F.Fab) (width 0.1))
(fp_line (start 3.75 -6.4) (end 3.75 6.4) (layer F.Fab) (width 0.1))
(fp_line (start 3.75 6.4) (end -3.75 6.4) (layer F.Fab) (width 0.1))
(fp_line (start -3.75 6.4) (end -3.75 -5.4) (layer F.Fab) (width 0.1))
(fp_line (start -3.75 -5.4) (end -2.75 -6.4) (layer F.Fab) (width 0.1))
(fp_line (start -5.93 -6.65) (end -5.93 6.65) (layer F.CrtYd) (width 0.05))
(fp_line (start -5.93 6.65) (end 5.93 6.65) (layer F.CrtYd) (width 0.05))
(fp_line (start 5.93 6.65) (end 5.93 -6.65) (layer F.CrtYd) (width 0.05))
(fp_line (start 5.93 -6.65) (end -5.93 -6.65) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 smd roundrect (at -4.65 -5.715 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 2 smd roundrect (at -4.65 -4.445 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 80 "Net-(U201-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 smd roundrect (at -4.65 -3.175 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 40 /Controller/LCD_D2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 4 smd roundrect (at -4.65 -1.905 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 81 "Net-(U201-Pad4)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 5 smd roundrect (at -4.65 -0.635 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 38 /Controller/LCD_D3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 6 smd roundrect (at -4.65 0.635 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 82 "Net-(U201-Pad6)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 7 smd roundrect (at -4.65 1.905 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 83 "Net-(U201-Pad7)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 8 smd roundrect (at -4.65 3.175 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 84 "Net-(U201-Pad8)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 9 smd roundrect (at -4.65 4.445 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 85 "Net-(U201-Pad9)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 10 smd roundrect (at -4.65 5.715 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 11 smd roundrect (at 4.65 5.715 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 12 smd roundrect (at 4.65 4.445 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 41 /Controller/LCD_D1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 13 smd roundrect (at 4.65 3.175 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 14 smd roundrect (at 4.65 1.905 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 39 /Controller/LCD_D0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 15 smd roundrect (at 4.65 0.635 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 86 "Net-(U201-Pad15)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 16 smd roundrect (at 4.65 -0.635 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 37 /Controller/LCD_EN))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 17 smd roundrect (at 4.65 -1.905 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 87 "Net-(U201-Pad17)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 18 smd roundrect (at 4.65 -3.175 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 36 /Controller/LCD_RS))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 19 smd roundrect (at 4.65 -4.445 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 20 smd roundrect (at 4.65 -5.715 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 66 "Net-(C212-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Package_SO.3dshapes/SOIC-20W_7.5x12.8mm_P1.27mm.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Crystal:Crystal_SMD_Abracon_ABM3B-4Pin_5.0x3.2mm (layer F.Cu) (tedit 5A0FD1B2) (tstamp 5DEF1941)
(at 48.5 105.5 180)
(descr "Abracon Miniature Ceramic Smd Crystal ABM3B http://www.abracon.com/Resonators/abm3b.pdf, 5.0x3.2mm^2 package")
(tags "SMD SMT crystal")
(path /5D77EC9D/5D80C867)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference Y201 (at 0 -2.8) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value "ABM3B 8MHz" (at 0 2.8) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -2.3 -1.6) (end 2.3 -1.6) (layer F.Fab) (width 0.1))
(fp_line (start 2.3 -1.6) (end 2.5 -1.4) (layer F.Fab) (width 0.1))
(fp_line (start 2.5 -1.4) (end 2.5 1.4) (layer F.Fab) (width 0.1))
(fp_line (start 2.5 1.4) (end 2.3 1.6) (layer F.Fab) (width 0.1))
(fp_line (start 2.3 1.6) (end -2.3 1.6) (layer F.Fab) (width 0.1))
(fp_line (start -2.3 1.6) (end -2.5 1.4) (layer F.Fab) (width 0.1))
(fp_line (start -2.5 1.4) (end -2.5 -1.4) (layer F.Fab) (width 0.1))
(fp_line (start -2.5 -1.4) (end -2.3 -1.6) (layer F.Fab) (width 0.1))
(fp_line (start -2.5 0.6) (end -1.5 1.6) (layer F.Fab) (width 0.1))
(fp_line (start -3.1 0.4) (end -2.7 0.4) (layer F.SilkS) (width 0.12))
(fp_line (start -2.7 0.4) (end -2.7 -0.4) (layer F.SilkS) (width 0.12))
(fp_line (start 2.7 -0.4) (end 2.7 0.4) (layer F.SilkS) (width 0.12))
(fp_line (start -0.9 -1.8) (end 0.9 -1.8) (layer F.SilkS) (width 0.12))
(fp_line (start 0.9 1.8) (end -0.9 1.8) (layer F.SilkS) (width 0.12))
(fp_line (start -0.9 1.8) (end -0.9 2.04) (layer F.SilkS) (width 0.12))
(fp_line (start -3.2 -2.1) (end -3.2 2.1) (layer F.CrtYd) (width 0.05))
(fp_line (start -3.2 2.1) (end 3.2 2.1) (layer F.CrtYd) (width 0.05))
(fp_line (start 3.2 2.1) (end 3.2 -2.1) (layer F.CrtYd) (width 0.05))
(fp_line (start 3.2 -2.1) (end -3.2 -2.1) (layer F.CrtYd) (width 0.05))
(fp_circle (center 0 0) (end 0.5 0) (layer F.Adhes) (width 0.1))
(fp_circle (center 0 0) (end 0.416667 0) (layer F.Adhes) (width 0.166667))
(fp_circle (center 0 0) (end 0.266667 0) (layer F.Adhes) (width 0.166667))
(fp_circle (center 0 0) (end 0.116667 0) (layer F.Adhes) (width 0.233333))
(pad 1 smd rect (at -2 1.2 180) (size 1.8 1.2) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 64 "Net-(C207-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd rect (at 2 1.2 180) (size 1.8 1.2) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad 3 smd rect (at 2 -1.2 180) (size 1.8 1.2) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 63 "Net-(C206-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 4 smd rect (at -2 -1.2 180) (size 1.8 1.2) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(model ${KISYS3DMOD}/Crystal.3dshapes/Crystal_SMD_Abracon_ABM3B-4Pin_5.0x3.2mm.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Connector_Multicomp:Multicomp_MC9A22-1034_2x05_P2.54mm_Horizontal (layer F.Cu) (tedit 5A16A5B3) (tstamp 5E016E79)
(at 26.5 100.5 90)
(descr http://www.farnell.com/cad/360651.pdf)
(tags "connector multicomp MC9A MC9A22")
(path /5E023D81)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference J102 (at -3 -3.5 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value DIGIO (at 5.08 -5.5 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 5.08 -1.27 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -5.07 -4.34) (end -5.07 -13.24) (layer F.SilkS) (width 0.15))
(fp_line (start -5.07 -13.24) (end 15.23 -13.24) (layer F.SilkS) (width 0.15))
(fp_line (start 15.23 -13.24) (end 15.23 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 15.23 -4.34) (end -5.07 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 2.855 -13.24) (end 2.855 -6.64) (layer F.SilkS) (width 0.15))
(fp_line (start 2.855 -6.64) (end 7.305 -6.64) (layer F.SilkS) (width 0.15))
(fp_line (start 7.305 -6.64) (end 7.305 -13.24) (layer F.SilkS) (width 0.15))
(fp_line (start 4.68 -6.64) (end 4.68 -12.84) (layer F.SilkS) (width 0.15))
(fp_line (start 4.68 -12.84) (end 4.88 -13.04) (layer F.SilkS) (width 0.15))
(fp_line (start 4.88 -13.04) (end 5.28 -13.04) (layer F.SilkS) (width 0.15))
(fp_line (start 5.28 -13.04) (end 5.48 -12.84) (layer F.SilkS) (width 0.15))
(fp_line (start 5.48 -12.84) (end 5.48 -6.64) (layer F.SilkS) (width 0.15))
(fp_line (start -1 -12.5) (end 1 -12.5) (layer F.SilkS) (width 0.15))
(fp_line (start 1 -12.5) (end 0 -11) (layer F.SilkS) (width 0.15))
(fp_line (start 0 -11) (end -1 -12.5) (layer F.SilkS) (width 0.15))
(fp_line (start -5.55 1.35) (end -5.55 -13.75) (layer F.CrtYd) (width 0.05))
(fp_line (start -5.55 -13.75) (end 15.75 -13.75) (layer F.CrtYd) (width 0.05))
(fp_line (start 15.75 -13.75) (end 15.75 1.35) (layer F.CrtYd) (width 0.05))
(fp_line (start 15.75 1.35) (end -5.55 1.35) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.4 -1.1) (end -0.4 -1.44) (layer F.SilkS) (width 0.15))
(fp_line (start 0.4 -1.1) (end 0.4 -1.44) (layer F.SilkS) (width 0.15))
(fp_line (start -0.4 -3.64) (end -0.4 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 0.4 -3.64) (end 0.4 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 2.14 -1.1) (end 2.14 -1.44) (layer F.SilkS) (width 0.15))
(fp_line (start 2.94 -1.1) (end 2.94 -1.44) (layer F.SilkS) (width 0.15))
(fp_line (start 2.14 -3.64) (end 2.14 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 2.94 -3.64) (end 2.94 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 4.68 -1.1) (end 4.68 -1.44) (layer F.SilkS) (width 0.15))
(fp_line (start 5.48 -1.1) (end 5.48 -1.44) (layer F.SilkS) (width 0.15))
(fp_line (start 4.68 -3.64) (end 4.68 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 5.48 -3.64) (end 5.48 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 7.22 -1.1) (end 7.22 -1.44) (layer F.SilkS) (width 0.15))
(fp_line (start 8.02 -1.1) (end 8.02 -1.44) (layer F.SilkS) (width 0.15))
(fp_line (start 7.22 -3.64) (end 7.22 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 8.02 -3.64) (end 8.02 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 9.76 -1.1) (end 9.76 -1.44) (layer F.SilkS) (width 0.15))
(fp_line (start 10.56 -1.1) (end 10.56 -1.44) (layer F.SilkS) (width 0.15))
(fp_line (start 9.76 -3.64) (end 9.76 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 10.56 -3.64) (end 10.56 -4.34) (layer F.SilkS) (width 0.15))
(pad 1 thru_hole rect (at 0 0 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(pad 2 thru_hole circle (at 0 -2.54 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 28 /DIGIO0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 thru_hole circle (at 2.54 0 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(pad 4 thru_hole circle (at 2.54 -2.54 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 27 /DIGIO1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 5 thru_hole circle (at 5.08 0 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(pad 6 thru_hole circle (at 5.08 -2.54 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 26 /DIGIO2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 7 thru_hole circle (at 7.62 0 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(pad 8 thru_hole circle (at 7.62 -2.54 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 25 /DIGIO3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 9 thru_hole circle (at 10.16 0 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(pad 10 thru_hole circle (at 10.16 -2.54 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 4 +3V3))
(model ${KISYS3DMOD}/Connector_Multicomp.3dshapes/Multicomp_MC9A22-1034_2x05_P2.54mm_Horizontal.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical (layer F.Cu) (tedit 59FED5CC) (tstamp 5E016EC3)
(at 24 30.5 90)
(descr "Through hole straight pin header, 1x02, 2.54mm pitch, single row")
(tags "Through hole pin header THT 1x02 2.54mm single row")
(path /5E336524)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference J104 (at 2 1.5 180) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 8V-dev (at 0 4.87 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer F.Fab) (width 0.1))
(fp_line (start 1.27 -1.27) (end 1.27 3.81) (layer F.Fab) (width 0.1))
(fp_line (start 1.27 3.81) (end -1.27 3.81) (layer F.Fab) (width 0.1))
(fp_line (start -1.27 3.81) (end -1.27 -0.635) (layer F.Fab) (width 0.1))
(fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer F.Fab) (width 0.1))
(fp_line (start -1.33 3.87) (end 1.33 3.87) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 1.27) (end -1.33 3.87) (layer F.SilkS) (width 0.12))
(fp_line (start 1.33 1.27) (end 1.33 3.87) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 1.27) (end 1.33 1.27) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 0) (end -1.33 -1.33) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 -1.33) (end 0 -1.33) (layer F.SilkS) (width 0.12))
(fp_line (start -1.8 -1.8) (end -1.8 4.35) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.8 4.35) (end 1.8 4.35) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.8 4.35) (end 1.8 -1.8) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 1.27) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 thru_hole rect (at 0 0 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 3 +8V))
(pad 2 thru_hole oval (at 0 2.54 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(model ${KISYS3DMOD}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x02_P2.54mm_Vertical.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E034027)
(at 32 68 180)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5DDD51E7)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R203 (at 0 9.75) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10k (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 14 /Controller/SDIO_D1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5E03D0D0)
(at 45 96.5 180)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5E579D23)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C202 (at 0 1.43) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 100n (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5E028C5B)
(at 62.25 91.75 270)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5E096137)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C312 (at 0 1.43 270) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 100n (at 0 -1.43 270) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 270) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5E028C6C)
(at 66.5 93 270)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E0B45CD)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R313 (at -0.23 -1.43 90) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 4k7 (at 0 -1.43 90) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 42 /Controller/FRONTEND_TEMP))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Package_TO_SOT_THT:TO-92_Inline (layer F.Cu) (tedit 5A1DD157) (tstamp 5E028C90)
(at 64.25 95 90)
(descr "TO-92 leads in-line, narrow, oval pads, drill 0.75mm (see NXP sot054_po.pdf)")
(tags "to-92 sc-43 sc-43a sot54 PA33 transistor")
(path /5D8C5188/5E08DC55)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference U306 (at 1.27 -3.56 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value DS18B20 (at 1.27 2.79 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 1.27 -3.56 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.53 1.85) (end 3.07 1.85) (layer F.SilkS) (width 0.12))
(fp_line (start -0.5 1.75) (end 3 1.75) (layer F.Fab) (width 0.1))
(fp_line (start -1.46 -2.73) (end 4 -2.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.46 -2.73) (end -1.46 2.01) (layer F.CrtYd) (width 0.05))
(fp_line (start 4 2.01) (end 4 -2.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 4 2.01) (end -1.46 2.01) (layer F.CrtYd) (width 0.05))
(fp_arc (start 1.27 0) (end 1.27 -2.48) (angle 135) (layer F.Fab) (width 0.1))
(fp_arc (start 1.27 0) (end 1.27 -2.6) (angle -135) (layer F.SilkS) (width 0.12))
(fp_arc (start 1.27 0) (end 1.27 -2.48) (angle -135) (layer F.Fab) (width 0.1))
(fp_arc (start 1.27 0) (end 1.27 -2.6) (angle 135) (layer F.SilkS) (width 0.12))
(pad 2 thru_hole oval (at 1.27 0 90) (size 1.05 1.5) (drill 0.75) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 42 /Controller/FRONTEND_TEMP))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 thru_hole oval (at 2.54 0 90) (size 1.05 1.5) (drill 0.75) (layers *.Cu *.Mask)
(net 4 +3V3))
(pad 1 thru_hole rect (at 0 0 90) (size 1.05 1.5) (drill 0.75) (layers *.Cu *.Mask)
(net 2 GND))
(model ${KISYS3DMOD}/Package_TO_SOT_THT.3dshapes/TO-92_Inline.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E06395E)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(at 59.75 105)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5E6DD5D6)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C215 (at 3.5 0) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(fp_text value 22n (at 0 1.43) (layer F.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 21 /Controller/TEMP_IN))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E05FC8D)
(at 57.37 54.25 270)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(path /5D77EC9D/5E2ED53B)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C203 (at 0 -1.43 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(fp_text value 100n (at 0 1.43 90) (layer F.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(fp_text user %R (at 0 0 90) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 0.4 0.4) (thickness 0.06)))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(net 2 GND))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 35 /Controller/LCD_VO))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module proz_unknown:1271.1001 (layer F.Cu) (tedit 5C192637) (tstamp 5E0E44F5)
(at 21 52 180)
(path /5E21EC78)
(fp_text reference FID101 (at 0.5 5.5) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value LightGuide (at 4.1 -2.5) (layer F.Fab) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -2.5 1.5) (end 2.5 1.5) (layer F.SilkS) (width 0.15))
(fp_line (start -2.5 -1.5) (end 2.5 -1.5) (layer F.SilkS) (width 0.15))
(fp_line (start -6.3 1.5) (end 8.1 1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start 8.1 1.5) (end 8.1 -1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start 8.1 -1.5) (end -6.3 -1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start -6.3 -1.5) (end -6.3 1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start 1.5 -1.5) (end 1.5 1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start -1.5 1.5) (end -1.5 -1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start -1.8 -1.2) (end -6 -1.2) (layer F.CrtYd) (width 0.12))
(fp_line (start -6 -1.2) (end -6 1.2) (layer F.CrtYd) (width 0.12))
(fp_line (start -6 1.2) (end -1.8 1.2) (layer F.CrtYd) (width 0.12))
(fp_line (start -1.8 1.2) (end -1.8 -1.2) (layer F.CrtYd) (width 0.12))
(pad "" np_thru_hole circle (at 0 0 180) (size 2.3 2.3) (drill 2.3) (layers *.Cu *.Mask))
)
(module Package_TO_SOT_SMD:SOT-23-6 (layer B.Cu) (tedit 5A02FF57) (tstamp 5E0DFDD3)
(at 20.75 99.25 180)
(descr "6-pin SOT-23 package")
(tags SOT-23-6)
(path /5E0F7F35)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference U101 (at 0 2.9) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value USBLC6-2SC6 (at 0 -2.9) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start 0.9 1.55) (end 0.9 -1.55) (layer B.Fab) (width 0.1))
(fp_line (start 0.9 -1.55) (end -0.9 -1.55) (layer B.Fab) (width 0.1))
(fp_line (start -0.9 0.9) (end -0.9 -1.55) (layer B.Fab) (width 0.1))
(fp_line (start 0.9 1.55) (end -0.25 1.55) (layer B.Fab) (width 0.1))
(fp_line (start -0.9 0.9) (end -0.25 1.55) (layer B.Fab) (width 0.1))
(fp_line (start -1.9 1.8) (end -1.9 -1.8) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.9 -1.8) (end 1.9 -1.8) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.9 -1.8) (end 1.9 1.8) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.9 1.8) (end -1.9 1.8) (layer B.CrtYd) (width 0.05))
(fp_line (start 0.9 1.61) (end -1.55 1.61) (layer B.SilkS) (width 0.12))
(fp_line (start -0.9 -1.61) (end 0.9 -1.61) (layer B.SilkS) (width 0.12))
(fp_text user %R (at 0 0 270) (layer B.Fab)
(effects (font (size 0.5 0.5) (thickness 0.075)) (justify mirror))
)
(pad 5 smd rect (at 1.1 0 180) (size 1.06 0.65) (layers B.Cu B.Paste B.Mask)
(net 4 +3V3))
(pad 6 smd rect (at 1.1 0.95 180) (size 1.06 0.65) (layers B.Cu B.Paste B.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 27 /DIGIO1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 4 smd rect (at 1.1 -0.95 180) (size 1.06 0.65) (layers B.Cu B.Paste B.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 28 /DIGIO0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 smd rect (at -1.1 -0.95 180) (size 1.06 0.65) (layers B.Cu B.Paste B.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 28 /DIGIO0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd rect (at -1.1 0 180) (size 1.06 0.65) (layers B.Cu B.Paste B.Mask)
(net 2 GND))
(pad 1 smd rect (at -1.1 0.95 180) (size 1.06 0.65) (layers B.Cu B.Paste B.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 27 /DIGIO1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-23-6.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Package_TO_SOT_SMD:SOT-23-6 (layer B.Cu) (tedit 5A02FF57) (tstamp 5E0DFE94)
(at 20.75 94.25 180)
(descr "6-pin SOT-23 package")
(tags SOT-23-6)
(path /5E0FFF2E)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference U102 (at 0 2.9 180) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value USBLC6-2SC6 (at 0 -2.9 180) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text user %R (at 0 0 90) (layer B.Fab)
(effects (font (size 0.5 0.5) (thickness 0.075)) (justify mirror))
)
(fp_line (start -0.9 -1.61) (end 0.9 -1.61) (layer B.SilkS) (width 0.12))
(fp_line (start 0.9 1.61) (end -1.55 1.61) (layer B.SilkS) (width 0.12))
(fp_line (start 1.9 1.8) (end -1.9 1.8) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.9 -1.8) (end 1.9 1.8) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.9 -1.8) (end 1.9 -1.8) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.9 1.8) (end -1.9 -1.8) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.9 0.9) (end -0.25 1.55) (layer B.Fab) (width 0.1))
(fp_line (start 0.9 1.55) (end -0.25 1.55) (layer B.Fab) (width 0.1))
(fp_line (start -0.9 0.9) (end -0.9 -1.55) (layer B.Fab) (width 0.1))
(fp_line (start 0.9 -1.55) (end -0.9 -1.55) (layer B.Fab) (width 0.1))
(fp_line (start 0.9 1.55) (end 0.9 -1.55) (layer B.Fab) (width 0.1))
(pad 1 smd rect (at -1.1 0.95 180) (size 1.06 0.65) (layers B.Cu B.Paste B.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 25 /DIGIO3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd rect (at -1.1 0 180) (size 1.06 0.65) (layers B.Cu B.Paste B.Mask)
(net 2 GND))
(pad 3 smd rect (at -1.1 -0.95 180) (size 1.06 0.65) (layers B.Cu B.Paste B.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 26 /DIGIO2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 4 smd rect (at 1.1 -0.95 180) (size 1.06 0.65) (layers B.Cu B.Paste B.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 26 /DIGIO2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 6 smd rect (at 1.1 0.95 180) (size 1.06 0.65) (layers B.Cu B.Paste B.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 25 /DIGIO3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 5 smd rect (at 1.1 0 180) (size 1.06 0.65) (layers B.Cu B.Paste B.Mask)
(net 4 +3V3))
(model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-23-6.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5E0E1D28)
(at 25.7125 88 180)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5E1FEFD9)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference C101 (at 0 1.43) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 100n (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
Schematic beautify and layout improvments, Length matching for SDIO
2019-12-25 19:15:32 +01:00
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E0E29E2)
(at 63.5 108)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5E2394E4)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C313 (at 0 -1.43) (layer F.SilkS)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(fp_text value 10u (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 52 "Net-(C313-Pad1)"))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5E0FC476)
(at 32 67.5 90)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5E1C8562)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R202 (at 0 1.43 90) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 10k (at 0 -1.43 90) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 49 /Controller/CARD_DETECT))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
Replace custom opamp circuit with INA126 instrumentation amp
2020-01-02 00:08:09 +01:00
)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(gr_text !230VAC! (at 90.75 17.25) (layer F.SilkS)
(effects (font (size 1.5 1.5) (thickness 0.15)))
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(gr_text v1.2 (at 28.25 19.5) (layer B.Mask)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1.5 1.5) (thickness 0.3)) (justify mirror))
)
(gr_arc (start 76 50.5) (end 76 49.5) (angle -180) (layer Edge.Cuts) (width 0.05))
(gr_arc (start 83.5 50.5) (end 84.5 50.5) (angle -90) (layer Edge.Cuts) (width 0.05))
(gr_line (start 76 49.5) (end 83.5 49.5) (layer Edge.Cuts) (width 0.05))
(gr_line (start 82 51.5) (end 76 51.5) (layer Edge.Cuts) (width 0.05))
(gr_arc (start 82 52) (end 82.5 52) (angle -90) (layer Edge.Cuts) (width 0.05))
(gr_line (start 79 81) (end 77.5 81.5) (layer F.SilkS) (width 0.12))
(gr_line (start 80.5 80.5) (end 79 81) (layer F.SilkS) (width 0.12))
(gr_line (start 84.5 80.5) (end 80.5 80.5) (layer F.SilkS) (width 0.12))
(gr_line (start 33.5 68) (end 33.5 77) (layer F.SilkS) (width 0.12))
(gr_line (start 34 67.5) (end 33.5 68) (layer F.SilkS) (width 0.12))
(gr_line (start 34 65.5) (end 34 67.5) (layer F.SilkS) (width 0.12))
(gr_line (start 30 66.5) (end 30 57.5) (layer F.SilkS) (width 0.12) (tstamp 5E0FCADD))
(gr_line (start 34 66.5) (end 30 66.5) (layer F.SilkS) (width 0.12) (tstamp 5E0FCADA))
(gr_line (start 34 57.5) (end 34 66.5) (layer F.SilkS) (width 0.12) (tstamp 5E0FCAD7))
(gr_line (start 30 57.5) (end 34 57.5) (layer F.SilkS) (width 0.12) (tstamp 5E0FCAD4))
(gr_line (start 72.5 48) (end 72.5 23) (layer Edge.Cuts) (width 0.05) (tstamp 5E018699))
(gr_arc (start 70.5 48) (end 68.5 48) (angle -180) (layer Edge.Cuts) (width 0.05))
(gr_line (start 68.5 23) (end 68.5 48) (layer Edge.Cuts) (width 0.05))
(gr_arc (start 70.5 23) (end 72.5 23) (angle -180) (layer Edge.Cuts) (width 0.05))
(gr_line (start 82.5 71) (end 82.5 52) (layer Edge.Cuts) (width 0.05))
(gr_line (start 83.5 72) (end 84.5 72) (layer Edge.Cuts) (width 0.05) (tstamp 5E0181A1))
(gr_arc (start 83.5 71) (end 82.5 71) (angle -90) (layer Edge.Cuts) (width 0.05))
(gr_line (start 93 72) (end 84.5 72) (layer Edge.Cuts) (width 0.05))
(gr_line (start 84.5 69.5) (end 84.5 50.5) (layer Edge.Cuts) (width 0.05))
(gr_arc (start 85 69.5) (end 84.5 69.5) (angle -90) (layer Edge.Cuts) (width 0.05))
(gr_line (start 93 70) (end 85 70) (layer Edge.Cuts) (width 0.05))
(gr_arc (start 93 71) (end 93 72) (angle -180) (layer Edge.Cuts) (width 0.05))
(gr_arc (start 17.5 108.5) (end 18 108.5) (angle -90) (layer Edge.Cuts) (width 0.05))
(gr_arc (start 17.5 17.5) (end 17.5 18) (angle -90) (layer Edge.Cuts) (width 0.05))
(gr_line (start 18 17.5) (end 18 13) (layer Edge.Cuts) (width 0.05) (tstamp 5E017CD8))
(gr_line (start 16 18) (end 17.5 18) (layer Edge.Cuts) (width 0.05))
(gr_line (start 16 108) (end 16 18) (layer Edge.Cuts) (width 0.05))
(gr_line (start 17.5 108) (end 16 108) (layer Edge.Cuts) (width 0.05))
(gr_line (start 18 113) (end 18 108.5) (layer Edge.Cuts) (width 0.05))
(gr_line (start 13.5 14.5) (end 13.5 115) (layer Dwgs.User) (width 0.15))
(gr_poly (pts (xy 98 15) (xy 18 15) (xy 18 13) (xy 98 13)) (layer Cmts.User) (width 0.1) (tstamp 5E00D0A3))
(gr_poly (pts (xy 98 113) (xy 18 113) (xy 18 111) (xy 98 111)) (layer Cmts.User) (width 0.1))
(gr_line (start 15 18) (end 101 18) (layer Dwgs.User) (width 0.15))
(gr_line (start 18 108) (end 100 108) (layer Dwgs.User) (width 0.15))
(gr_line (start 18 108) (end 13.5 108) (layer Dwgs.User) (width 0.15))
(gr_line (start 98 13) (end 18 13) (layer Edge.Cuts) (width 0.05) (tstamp 5DEF2EDE))
(gr_line (start 98 113) (end 98 13) (layer Edge.Cuts) (width 0.05))
(gr_line (start 18 113) (end 98 113) (layer Edge.Cuts) (width 0.05))
(segment (start 97.25 96.75) (end 91.5 102.5) (width 0.3) (layer B.Cu) (net 1) (status 20))
(segment (start 97 88) (end 97.25 87.75) (width 0.3) (layer B.Cu) (net 1))
(segment (start 22.5 19.1) (end 22.5 16.5) (width 0.3) (layer F.Cu) (net 1))
(segment (start 96.75 14) (end 73 14) (width 0.3) (layer B.Cu) (net 1))
(segment (start 22.5 14) (end 20.25 14) (width 0.3) (layer B.Cu) (net 1))
(segment (start 97.375 14.625) (end 96.875 14.125) (width 0.3) (layer B.Cu) (net 1))
(segment (start 91 30) (end 97.47499 30) (width 0.6) (layer B.Cu) (net 1) (status 10))
(segment (start 97.47499 14.72499) (end 97.375 14.625) (width 0.6) (layer B.Cu) (net 1))
(segment (start 97.47499 30) (end 97.47499 14.72499) (width 0.6) (layer B.Cu) (net 1))
(segment (start 23.5 14) (end 22.5 14) (width 0.3) (layer B.Cu) (net 1) (tstamp 5E0294E1))
(via (at 23.5 14) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 1))
(segment (start 31 14) (end 23.5 14) (width 0.3) (layer B.Cu) (net 1) (tstamp 5E0294E3))
(via (at 31 14) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 1))
(segment (start 66 14) (end 31 14) (width 0.3) (layer B.Cu) (net 1) (tstamp 5E0294E5))
(via (at 66 14) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 1))
(segment (start 73 14) (end 66 14) (width 0.3) (layer B.Cu) (net 1) (tstamp 5E0294E7))
(via (at 73 14) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 1))
(segment (start 96.875 14.125) (end 96.75 14) (width 0.3) (layer B.Cu) (net 1) (tstamp 5E0294E9))
(via (at 96.875 14.125) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 1))
(segment (start 22.5 16) (end 22.5 19.1) (width 0.6) (layer F.Cu) (net 1))
(segment (start 22.5 16.5) (end 22.5 16) (width 0.6) (layer F.Cu) (net 1))
(segment (start 22.5 16) (end 22.5 14.5) (width 0.6) (layer F.Cu) (net 1))
(segment (start 22.5 14.5) (end 23 14.5) (width 0.6) (layer F.Cu) (net 1))
(segment (start 23 14.5) (end 23.5 14) (width 0.6) (layer F.Cu) (net 1))
(segment (start 22.5 19.1) (end 26.5 19.1) (width 0.6) (layer F.Cu) (net 1) (status 20))
(segment (start 97 97) (end 97 90.92) (width 0.6) (layer F.Cu) (net 1))
(segment (start 91.5 102.5) (end 97 97) (width 0.6) (layer F.Cu) (net 1) (status 10))
(segment (start 97 88) (end 91.5 88) (width 0.6) (layer F.Cu) (net 1) (status 20))
(segment (start 97 90.92) (end 97 88) (width 0.6) (layer F.Cu) (net 1))
(via (at 28.5 112) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 1))
(via (at 40 112) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 1))
(via (at 57.5 112) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 1))
(via (at 85 112) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 1))
(segment (start 91.5 107.025483) (end 91.5 111.5) (width 2) (layer B.Cu) (net 1))
(segment (start 91.5 102.5) (end 91.5 107.025483) (width 2) (layer B.Cu) (net 1) (status 10))
(segment (start 91.5 102.5) (end 91.5 111.5) (width 2) (layer F.Cu) (net 1) (status 10))
(segment (start 91 30) (end 96.77499 30) (width 2) (layer B.Cu) (net 1) (status 10))
(segment (start 22.5 19.7125) (end 22.5 19.1) (width 0.6) (layer F.Cu) (net 1) (status 10))
(segment (start 86.9 102.5) (end 91.5 102.5) (width 0.6) (layer F.Cu) (net 1) (status 30))
(segment (start 96.5 97.5) (end 96.5 88) (width 2) (layer B.Cu) (net 1))
(segment (start 91.5 102.5) (end 96.5 97.5) (width 2) (layer B.Cu) (net 1) (status 10))
(segment (start 96.5 88) (end 97 88) (width 0.3) (layer B.Cu) (net 1))
(segment (start 96.5 88) (end 91.5 88) (width 2) (layer B.Cu) (net 1) (status 20))
(segment (start 97.25 30.47501) (end 96.77499 30) (width 0.4) (layer B.Cu) (net 1))
(segment (start 91 30) (end 97.62499 30) (width 0.3) (layer B.Cu) (net 1) (status 10))
(segment (start 96.5 88) (end 97.5 87) (width 0.4) (layer B.Cu) (net 1))
(segment (start 97.5 30) (end 97.5 30.5) (width 0.4) (layer B.Cu) (net 1))
(segment (start 97.5 87) (end 97.5 30) (width 0.4) (layer B.Cu) (net 1))
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(segment (start 91.45 102.45) (end 91.5 102.5) (width 1) (layer F.Cu) (net 1))
(segment (start 60 14) (end 66 14) (width 1) (layer F.Cu) (net 1))
(segment (start 30 14) (end 31 14) (width 1) (layer F.Cu) (net 1))
(segment (start 30 17.275) (end 30 14) (width 1) (layer F.Cu) (net 1))
(segment (start 53 17.275) (end 53 14) (width 1) (layer F.Cu) (net 1))
(segment (start 33 110.725) (end 33 112) (width 1) (layer F.Cu) (net 1))
(segment (start 33 112) (end 28.5 112) (width 1) (layer F.Cu) (net 1))
Improve layout, change color of B.Silk and improve schematic
2020-01-12 14:56:58 +01:00
(via (at 76 68.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 75 68.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 77.5 70) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Move vias to better locations: These vias have proven unfortunately placed for hand soldering
2020-02-05 22:12:31 +01:00
(via (at 75.75 92.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(via (at 68 99.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(via (at 68 100.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 65.75 100.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 36 46) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 34 78) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 34 80) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 41 36.5) (end 42 37.5) (width 1) (layer F.Cu) (net 2))
(segment (start 48.5 37.5) (end 50.58 35.42) (width 1) (layer F.Cu) (net 2) (status 20))
(segment (start 42 37.5) (end 48.5 37.5) (width 1) (layer F.Cu) (net 2))
(segment (start 26.54 21.94) (end 26.5 21.9) (width 1) (layer F.Cu) (net 2) (status 30))
(segment (start 26.54 30.5) (end 26.54 21.94) (width 1) (layer F.Cu) (net 2) (status 30))
(segment (start 26.5 21.9) (end 22.5 21.9) (width 1) (layer F.Cu) (net 2) (status 10))
(via (at 77.5 68.5) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
(segment (start 76.22 70.2) (end 76.22 69.78) (width 1) (layer F.Cu) (net 2) (status 30))
(segment (start 76.22 69.78) (end 77.5 68.5) (width 1) (layer F.Cu) (net 2) (status 10))
(segment (start 77.5625 71.5425) (end 76.22 70.2) (width 1) (layer F.Cu) (net 2) (status 20))
(segment (start 77.5625 73) (end 77.5625 71.5425) (width 1) (layer F.Cu) (net 2) (status 10))
(segment (start 75.92 69.9) (end 76.22 70.2) (width 1) (layer F.Cu) (net 2) (status 30))
(segment (start 73 69.9) (end 75.92 69.9) (width 1) (layer F.Cu) (net 2) (status 30))
(via (at 75.99 83.17) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 76 83.18) (end 75.99 83.17) (width 0.4) (layer F.Cu) (net 2))
(via (at 52.56 107.51) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 52.5 106.2875) (end 52.5 107.45) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 52.5 107.45) (end 52.56 107.51) (width 0.3) (layer F.Cu) (net 2))
(segment (start 46.5 104.3) (end 46.5 104.18) (width 0.3) (layer F.Cu) (net 2) (status 30))
(segment (start 46.5 104.18) (end 47 103.68) (width 0.3) (layer F.Cu) (net 2) (status 10))
Move vias to better locations: These vias have proven unfortunately placed for hand soldering
2020-02-05 22:12:31 +01:00
(via (at 50 97.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(segment (start 50.51 97.74) (end 50.21 97.74) (width 0.3) (layer F.Cu) (net 2))
(segment (start 52 101.675) (end 52 99.23) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 52 99.23) (end 50.51 97.74) (width 0.3) (layer F.Cu) (net 2))
(segment (start 51.4725 97.74) (end 51.5 97.7125) (width 0.3) (layer B.Cu) (net 2) (status 30))
(segment (start 50.21 97.74) (end 51.4725 97.74) (width 0.3) (layer B.Cu) (net 2) (status 20))
(via (at 66 53) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 67 53) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 68 53) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 68 57) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 67 57) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 66 57) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 39.5 59.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 35.5 59.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 26.5 60.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 45 59.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 45 62.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 35.5 62.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 26.5 64) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 50.2325 79.945) (end 50 79.7125) (width 0.3) (layer F.Cu) (net 2) (status 30))
(segment (start 52.85 79.945) (end 50.2325 79.945) (width 0.3) (layer F.Cu) (net 2) (status 30))
(via (at 60.35 81.19) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 62.15 81.215) (end 60.375 81.215) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 60.375 81.215) (end 60.35 81.19) (width 0.3) (layer F.Cu) (net 2))
(via (at 60 70) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 67.94 80.65) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 67.95 79.5) (end 67.95 80.64) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 67.95 80.64) (end 67.94 80.65) (width 0.3) (layer F.Cu) (net 2))
(segment (start 39.2875 99.5) (end 38.5 98.7125) (width 0.3) (layer F.Cu) (net 2) (status 20))
(segment (start 40.825 99.5) (end 39.2875 99.5) (width 0.3) (layer F.Cu) (net 2) (status 10))
Move vias to better locations: These vias have proven unfortunately placed for hand soldering
2020-02-05 22:12:31 +01:00
(via (at 46.75 99.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(segment (start 47 101.675) (end 47 100.04) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 47 100.04) (end 46.35 99.39) (width 0.3) (layer F.Cu) (net 2))
Move vias to better locations: These vias have proven unfortunately placed for hand soldering
2020-02-05 22:12:31 +01:00
(via (at 46 100) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2) (tstamp 5E3B72CF))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(segment (start 47 103.1) (end 47 103.43) (width 0.3) (layer F.Cu) (net 2))
(segment (start 47 103.1) (end 47 101.675) (width 0.3) (layer F.Cu) (net 2) (status 20))
(segment (start 47 103.68) (end 47 103.1) (width 0.3) (layer F.Cu) (net 2))
(via (at 65.75 98.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 60 94) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 82 95) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 82 98) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 32.48 97.98) (end 32.5 97.96) (width 0.3) (layer F.Cu) (net 2) (status 30))
(via (at 37 83.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 37 84.9) (end 37 83.75) (width 0.6) (layer F.Cu) (net 2) (status 10))
(via (at 37 86.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 37 84.9) (end 37 86.25) (width 0.6) (layer F.Cu) (net 2) (status 10))
(via (at 39.5 74) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 40 73.135) (end 40 73.4) (width 0.3) (layer F.Cu) (net 2) (status 30))
(segment (start 43 84.575) (end 41.925 83.5) (width 0.3) (layer F.Cu) (net 2) (status 20))
(segment (start 43 86.325) (end 43 84.575) (width 0.3) (layer F.Cu) (net 2) (status 10))
(via (at 41.9 82.2) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 41.925 83.5) (end 41.925 82.225) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 41.925 82.225) (end 41.9 82.2) (width 0.3) (layer F.Cu) (net 2))
(via (at 39.86 86.21) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 37 84.9) (end 38.55 84.9) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 38.55 84.9) (end 39.86 86.21) (width 0.3) (layer F.Cu) (net 2))
(via (at 25 76.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 29 66) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 58.31 100.56) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 56.175 99.5) (end 57.25 99.5) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 57.25 99.5) (end 58.31 100.56) (width 0.3) (layer F.Cu) (net 2))
(via (at 42.63 96.96) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 40.825 97) (end 42.59 97) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 42.59 97) (end 42.63 96.96) (width 0.3) (layer F.Cu) (net 2))
(via (at 36 45) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 36 44) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 93 77.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 61.7875 100.5) (end 61.14375 99.85625) (width 0.3) (layer F.Cu) (net 2))
(segment (start 61.7875 101) (end 61.7875 100.5) (width 0.3) (layer F.Cu) (net 2) (status 10))
(via (at 39.75 103.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 39.75 101) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 43.04 99.13) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 40.825 99.5) (end 42.67 99.5) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 42.67 99.5) (end 43.04 99.13) (width 0.3) (layer F.Cu) (net 2))
(via (at 73 53) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
(via (at 73 59) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
(via (at 41.5 56) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
(via (at 47.5 89.77) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
(via (at 47 95) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
Move vias to better locations: These vias have proven unfortunately placed for hand soldering
2020-02-05 22:12:31 +01:00
(via (at 52.25 94) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(via (at 44 98) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(via (at 87.5 75.5) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(via (at 71.5 83.5) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
(segment (start 73.9375 53.9375) (end 73 53) (width 0.3) (layer F.Cu) (net 2))
(segment (start 73.9375 56) (end 73.9375 53.9375) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 73 56.9375) (end 73.9375 56) (width 0.3) (layer F.Cu) (net 2) (status 20))
(segment (start 73 59) (end 73 56.9375) (width 0.3) (layer F.Cu) (net 2))
(via (at 34.18 72.45) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 32.7875 72.5) (end 34.13 72.5) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 34.13 72.5) (end 34.18 72.45) (width 0.3) (layer F.Cu) (net 2))
(via (at 24 82) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 22 86) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 25 86) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 63 90) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 40.825 97) (end 39 97) (width 0.25) (layer F.Cu) (net 2) (status 10))
(segment (start 38.5 97.5) (end 38.5 98.7125) (width 0.25) (layer F.Cu) (net 2) (status 20))
(segment (start 39 97) (end 38.5 97.5) (width 0.25) (layer F.Cu) (net 2))
(segment (start 62.25 90.75) (end 63 90) (width 0.3) (layer B.Cu) (net 2) (status 10))
(segment (start 62.25 90.9625) (end 62.25 90.75) (width 0.3) (layer B.Cu) (net 2) (status 30))
(segment (start 61.14375 99.85625) (end 60.2875 99) (width 0.3) (layer F.Cu) (net 2) (tstamp 5E02B2E8) (status 20))
(via (at 61.14375 99.85625) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 48 84.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 49.5 84.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 93 77.5) (end 94.4 77.5) (width 0.6) (layer F.Cu) (net 2) (status 20))
(via (at 25 74) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 25 72) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 19.5 72) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 19.5 74) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 17.9 66.3) (end 19.8 66.3) (width 0.3) (layer F.Cu) (net 2) (status 10))
(via (at 20 66.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 19.8 66.3) (end 20 66.5) (width 0.3) (layer F.Cu) (net 2))
(via (at 19 80.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 17.9 81.8) (end 17.9 80.9) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 18.3 80.5) (end 19 80.5) (width 0.3) (layer F.Cu) (net 2))
(segment (start 17.9 80.9) (end 18.3 80.5) (width 0.3) (layer F.Cu) (net 2))
(via (at 24.5 70.5) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
(segment (start 24.8 70.8) (end 24.5 70.5) (width 0.6) (layer F.Cu) (net 2))
(segment (start 28 70.8) (end 24.8 70.8) (width 0.6) (layer F.Cu) (net 2) (status 10))
(segment (start 39.5 47.02) (end 37.28 44.8) (width 1) (layer F.Cu) (net 2) (status 20))
(segment (start 39.5 48.7125) (end 39.5 47.02) (width 1) (layer F.Cu) (net 2) (status 10))
(segment (start 29.5 48.4375) (end 28.0625 48.4375) (width 1) (layer F.Cu) (net 2) (status 10))
(via (at 28 48.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 28.0625 48.4375) (end 28 48.5) (width 1) (layer F.Cu) (net 2))
(via (at 31 54.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 29.7875 54.5) (end 31 54.5) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 27 49.5) (end 28 48.5) (width 0.3) (layer F.Cu) (net 2))
(segment (start 25.7875 49.5) (end 27 49.5) (width 0.3) (layer F.Cu) (net 2) (status 10))
(via (at 61.5 99) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 59.26251 89.49999) (end 58.999083 89.49999) (width 0.3) (layer F.Cu) (net 2))
(via (at 58.999083 89.49999) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 57.06 100.56) (end 58.31 100.56) (width 0.3) (layer B.Cu) (net 2))
(segment (start 56.5 100) (end 57.06 100.56) (width 0.3) (layer B.Cu) (net 2))
(segment (start 22.5 21.9) (end 22.5 21.2875) (width 0.6) (layer F.Cu) (net 2) (status 20))
(segment (start 50.21 100.21) (end 50.21 97.74) (width 0.3) (layer B.Cu) (net 2))
(segment (start 50.73 100.73) (end 50.21 100.21) (width 0.3) (layer B.Cu) (net 2))
(segment (start 56.5 100) (end 55.77 100.73) (width 0.3) (layer B.Cu) (net 2))
(segment (start 55.77 100.73) (end 50.73 100.73) (width 0.3) (layer B.Cu) (net 2))
(via (at 48.5 108) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 50.5 108) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 29 77.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 29 82.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 25 80.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 46.0875 104.7125) (end 46.5 104.3) (width 0.6) (layer F.Cu) (net 2) (status 30))
(segment (start 44.5 104.7125) (end 46.0875 104.7125) (width 0.6) (layer F.Cu) (net 2) (status 30))
(segment (start 52.0875 106.7) (end 52.5 106.2875) (width 0.6) (layer F.Cu) (net 2) (status 20))
(segment (start 50.5 106.7) (end 52.0875 106.7) (width 0.6) (layer F.Cu) (net 2) (status 10))
(via (at 73 81.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 73.9725 82.7125) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(via (at 65.75 108) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(segment (start 61.893553 95.3) (end 61.54 95.3) (width 0.3) (layer F.Cu) (net 2))
(segment (start 64.25 94.77) (end 63.72 95.3) (width 0.3) (layer F.Cu) (net 2) (status 30))
(segment (start 63.72 95.3) (end 61.893553 95.3) (width 0.3) (layer F.Cu) (net 2) (status 10))
(via (at 61.54 95.3) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 82 100) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 82 102.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 61 102.2625) (end 61 104.5) (width 0.25) (layer F.Cu) (net 2))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(via (at 61.5 104.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(segment (start 61.7875 101) (end 61.7875 101.475) (width 0.25) (layer F.Cu) (net 2) (status 10))
(segment (start 61.7875 101.475) (end 61 102.2625) (width 0.25) (layer F.Cu) (net 2))
(segment (start 65.25 95) (end 64.25 95) (width 0.25) (layer F.Cu) (net 2) (status 20))
(segment (start 65.32501 94.92499) (end 65.32501 91.31501) (width 0.25) (layer F.Cu) (net 2))
(segment (start 65.25 95) (end 65.32501 94.92499) (width 0.25) (layer F.Cu) (net 2))
(segment (start 64.01 90) (end 63 90) (width 0.25) (layer F.Cu) (net 2))
(segment (start 65.32501 91.31501) (end 64.01 90) (width 0.25) (layer F.Cu) (net 2))
(via (at 65.75 104.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2) (tstamp 5E0F966B))
(via (at 60 74.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 52 101.675) (end 52 102.9) (width 0.25) (layer F.Cu) (net 2) (status 10))
(segment (start 52 102.9) (end 53.56 104.46) (width 0.25) (layer F.Cu) (net 2))
(segment (start 52.975 106.2875) (end 52.5 106.2875) (width 0.25) (layer F.Cu) (net 2) (status 20))
(segment (start 53.56 105.7025) (end 52.975 106.2875) (width 0.25) (layer F.Cu) (net 2))
(segment (start 53.56 104.46) (end 53.56 105.7025) (width 0.25) (layer F.Cu) (net 2))
(segment (start 65.5 95.25) (end 65.25 95) (width 0.25) (layer F.Cu) (net 2))
(segment (start 65.85 98.03) (end 65.85 95.92) (width 0.25) (layer F.Cu) (net 2))
(segment (start 65.5 95.57) (end 65.5 95.25) (width 0.25) (layer F.Cu) (net 2))
(segment (start 65.85 95.92) (end 65.5 95.57) (width 0.25) (layer F.Cu) (net 2))
(via (at 58.01 92.54) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 61.59 85.92) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 44.99 87.73) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 43.08 87.73) (end 44.636447 87.73) (width 0.25) (layer F.Cu) (net 2))
(segment (start 44.636447 87.73) (end 44.99 87.73) (width 0.25) (layer F.Cu) (net 2))
(segment (start 43 86.325) (end 43 87.65) (width 0.25) (layer F.Cu) (net 2) (status 10))
(segment (start 43 87.65) (end 43.08 87.73) (width 0.25) (layer F.Cu) (net 2))
Move vias to better locations: These vias have proven unfortunately placed for hand soldering
2020-02-05 22:12:31 +01:00
(via (at 50 96.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(via (at 22 109) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 25 109) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 28 109) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 31 109) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 34 109) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 37 109) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 23 104) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 25 87) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 22 87) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 45.5 91.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 44.25 94.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 44 92.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 34.999992 83.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 35.85 83.75) (end 34.999992 83.75) (width 0.6) (layer F.Cu) (net 2))
(segment (start 37 84.9) (end 35.85 83.75) (width 0.6) (layer F.Cu) (net 2) (status 10))
(via (at 34.75 91.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 33.66 91.5) (end 32.5 90.34) (width 0.6) (layer F.Cu) (net 2) (status 20))
(segment (start 34.75 91.5) (end 33.66 91.5) (width 0.6) (layer F.Cu) (net 2))
(via (at 38.25 93.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 36.75 90.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 76.17 86) (end 78.7125 86) (width 0.4) (layer F.Cu) (net 2) (status 20))
(segment (start 78.7125 86) (end 79 85.7125) (width 0.4) (layer F.Cu) (net 2) (status 30))
(segment (start 76 85.83) (end 76.17 86) (width 0.4) (layer F.Cu) (net 2))
(segment (start 76 84.65) (end 76 85.83) (width 0.4) (layer F.Cu) (net 2) (status 10))
(segment (start 79 85.7125) (end 79 85.2875) (width 0.4) (layer F.Cu) (net 2) (status 30))
(segment (start 79 85.2875) (end 80.2875 84) (width 0.4) (layer F.Cu) (net 2) (status 30))
(segment (start 80.2875 82) (end 80.2875 84) (width 0.4) (layer F.Cu) (net 2) (status 30))
(segment (start 76 84.65) (end 76 83.18) (width 0.4) (layer F.Cu) (net 2) (status 10))
(segment (start 73.9725 82.7125) (end 74.43 83.17) (width 0.4) (layer F.Cu) (net 2))
(segment (start 74.43 83.17) (end 75.99 83.17) (width 0.4) (layer F.Cu) (net 2))
(segment (start 73 82.7125) (end 73.9725 82.7125) (width 0.4) (layer F.Cu) (net 2) (status 10))
(via (at 56.5 106.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 56.5 108.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 60.5 83.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 63.5 82.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 64.25 94.77) (end 64.25 95.4) (width 0.3) (layer B.Cu) (net 2))
(via (at 40.25 109) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 26.5 88) (end 26.5 87) (width 0.3) (layer B.Cu) (net 2))
(segment (start 26.5 87) (end 25 87) (width 0.3) (layer B.Cu) (net 2))
(segment (start 50 79.7125) (end 50 78.5) (width 0.3) (layer F.Cu) (net 2))
(via (at 50 78.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 50 72.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 50.175 72.325) (end 50 72.5) (width 0.3) (layer F.Cu) (net 2))
(segment (start 52.85 72.325) (end 50.175 72.325) (width 0.3) (layer F.Cu) (net 2))
(segment (start 50.215 69.785) (end 50 70) (width 0.3) (layer F.Cu) (net 2))
(segment (start 52.85 69.785) (end 50.215 69.785) (width 0.3) (layer F.Cu) (net 2))
(via (at 50 70) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 41.749984 107.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 41.64 107.640016) (end 41.749984 107.75) (width 0.3) (layer F.Cu) (net 2))
(segment (start 41.64 106.3975) (end 41.64 107.640016) (width 0.3) (layer F.Cu) (net 2))
(via (at 39.5 74.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 39.5 75.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 35.5 64.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 37.5 64.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 37.5 62.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 40.25 62.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 40.25 64.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(segment (start 68.475 92.2125) (end 68 92.2125) (width 0.25) (layer F.Cu) (net 2))
(via (at 68.5 91) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 68 91.5) (end 68.5 91) (width 0.25) (layer F.Cu) (net 2))
(segment (start 68.853553 91) (end 68.5 91) (width 0.25) (layer F.Cu) (net 2))
(segment (start 68 92.2125) (end 68 91.5) (width 0.25) (layer F.Cu) (net 2))
(segment (start 70.5 91.225) (end 70.275 91) (width 0.25) (layer F.Cu) (net 2))
(segment (start 70.5 91.8) (end 70.5 91.225) (width 0.25) (layer F.Cu) (net 2))
(segment (start 70.275 91) (end 68.853553 91) (width 0.25) (layer F.Cu) (net 2))
(segment (start 70.5 92.375) (end 70.5 91.8) (width 0.25) (layer F.Cu) (net 2))
(segment (start 72.75 92.4) (end 72.75 91.9625) (width 0.25) (layer F.Cu) (net 2))
(segment (start 72.4 92.75) (end 72.75 92.4) (width 0.25) (layer F.Cu) (net 2))
(segment (start 70.5 92.375) (end 70.875 92.75) (width 0.25) (layer F.Cu) (net 2))
(segment (start 70.875 92.75) (end 72.4 92.75) (width 0.25) (layer F.Cu) (net 2))
(segment (start 76.5 95.3) (end 76.5 94.5) (width 0.25) (layer F.Cu) (net 2))
(segment (start 77.2875 93.7125) (end 76.5 94.5) (width 0.25) (layer F.Cu) (net 2))
(segment (start 77.2875 93.5) (end 77.2875 93.7125) (width 0.25) (layer F.Cu) (net 2))
(segment (start 78.275 95.4625) (end 77.4875 96.25) (width 0.25) (layer F.Cu) (net 2))
(segment (start 78.75 95.4625) (end 78.275 95.4625) (width 0.25) (layer F.Cu) (net 2))
(segment (start 77.4875 96.25) (end 76.75 96.25) (width 0.25) (layer F.Cu) (net 2))
(segment (start 76.5 96) (end 76.5 95.3) (width 0.25) (layer F.Cu) (net 2))
(segment (start 76.75 96.25) (end 76.5 96) (width 0.25) (layer F.Cu) (net 2))
(via (at 71 95.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 74.25 94) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 76.75 100) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 77.5375 98.75) (end 77.5 98.75) (width 0.25) (layer F.Cu) (net 2))
(segment (start 76.5 97.75) (end 76.5 95.3) (width 0.25) (layer F.Cu) (net 2))
(segment (start 77.5 98.75) (end 76.5 97.75) (width 0.25) (layer F.Cu) (net 2))
Improve layout, change color of B.Silk and improve schematic
2020-01-12 14:56:58 +01:00
(segment (start 56.175 99.5) (end 53.5 99.5) (width 0.25) (layer F.Cu) (net 2))
(segment (start 51.74 97.74) (end 50.21 97.74) (width 0.25) (layer F.Cu) (net 2))
(segment (start 53.5 99.5) (end 51.74 97.74) (width 0.25) (layer F.Cu) (net 2))
(via (at 56 85) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 58.5 85.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 52 109.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 48 109.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(segment (start 77.4625 73.1) (end 77.5625 73) (width 0.6) (layer F.Cu) (net 2))
(segment (start 75.05 73.1) (end 77.4625 73.1) (width 0.6) (layer F.Cu) (net 2))
(segment (start 79.9125 75.35) (end 77.5625 73) (width 0.6) (layer F.Cu) (net 2))
(segment (start 80.75 75.35) (end 79.9125 75.35) (width 0.6) (layer F.Cu) (net 2))
(via (at 74.5 75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 75.05 73.1) (end 75.05 74.45) (width 0.6) (layer F.Cu) (net 2))
(segment (start 75.05 74.45) (end 74.5 75) (width 0.6) (layer F.Cu) (net 2))
(via (at 75.75 75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 74.5 75) (end 75.75 75) (width 0.6) (layer B.Cu) (net 2))
(segment (start 75.05 74.3) (end 75.75 75) (width 0.6) (layer F.Cu) (net 2))
(segment (start 75.05 73.1) (end 75.05 74.3) (width 0.6) (layer F.Cu) (net 2))
(via (at 82.75 75.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 80.75 75.35) (end 82.6 75.35) (width 0.6) (layer F.Cu) (net 2))
(segment (start 82.6 75.35) (end 82.75 75.5) (width 0.6) (layer F.Cu) (net 2))
(segment (start 60.975 105) (end 60.5375 105) (width 0.4) (layer F.Cu) (net 2))
(segment (start 61 104.975) (end 60.975 105) (width 0.4) (layer F.Cu) (net 2))
(segment (start 61 104.5) (end 61 104.975) (width 0.4) (layer F.Cu) (net 2))
(segment (start 61.2875 104.25) (end 60.5375 105) (width 0.4) (layer F.Cu) (net 2))
(segment (start 61.5 104.25) (end 61.2875 104.25) (width 0.4) (layer F.Cu) (net 2))
(segment (start 74.9 104.25) (end 75.25 103.9) (width 0.3) (layer F.Cu) (net 2))
(segment (start 75.25 103.9) (end 75.25 103.4625) (width 0.3) (layer F.Cu) (net 2))
(segment (start 73.325 104.25) (end 74.9 104.25) (width 0.3) (layer F.Cu) (net 2))
(segment (start 73 103.3) (end 73 103.925) (width 0.3) (layer F.Cu) (net 2))
(segment (start 73 103.925) (end 73.325 104.25) (width 0.3) (layer F.Cu) (net 2))
(segment (start 64.2875 108) (end 65.75 108) (width 0.3) (layer F.Cu) (net 2))
(segment (start 76.75 100.353553) (end 76.75 100) (width 0.3) (layer F.Cu) (net 2))
(segment (start 75.725 103.4625) (end 76.75 102.4375) (width 0.3) (layer F.Cu) (net 2))
(segment (start 76.75 102.4375) (end 76.75 100.353553) (width 0.3) (layer F.Cu) (net 2))
(segment (start 75.25 103.4625) (end 75.725 103.4625) (width 0.3) (layer F.Cu) (net 2))
(via (at 83.25 86.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 81.5 86.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Re-annotate components
2020-02-05 18:58:36 +01:00
(via (at 62.5 109.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 71.75 107.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 73 107.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 74.25 107.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Move vias to better locations: These vias have proven unfortunately placed for hand soldering
2020-02-05 22:12:31 +01:00
(via (at 71.75 75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 71.75 76.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 74.5 76.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 75.75 76.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 75.5 88.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 75.5 90.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(via (at 79.5 69) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 3))
(via (at 79.5 71) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 3))
(segment (start 23 39) (end 23 31.5) (width 1) (layer F.Cu) (net 3))
(segment (start 23 31.5) (end 24 30.5) (width 1) (layer F.Cu) (net 3) (status 20))
(segment (start 24.5 40.5) (end 23 39) (width 1) (layer F.Cu) (net 3))
(segment (start 91.6 82.9) (end 91.5 83) (width 1) (layer F.Cu) (net 3) (status 30))
(segment (start 91.6 77.5) (end 91.6 82.9) (width 1) (layer F.Cu) (net 3) (status 30))
(segment (start 46.5 40.5) (end 45.5 40.5) (width 1) (layer B.Cu) (net 3) (status 30))
(segment (start 81 68.5) (end 81 57) (width 1) (layer B.Cu) (net 3))
(segment (start 81 57) (end 79 55) (width 1) (layer B.Cu) (net 3))
(segment (start 79 55) (end 61 55) (width 1) (layer B.Cu) (net 3))
(segment (start 61 55) (end 46.5 40.5) (width 1) (layer B.Cu) (net 3) (status 20))
(segment (start 26.72 40.22) (end 26.5 40) (width 1) (layer F.Cu) (net 3) (status 30))
(segment (start 91.5 83.6875) (end 91.5 83) (width 0.3) (layer B.Cu) (net 3) (status 30))
(segment (start 87.975 87.2125) (end 91.5 83.6875) (width 0.3) (layer B.Cu) (net 3) (status 20))
(segment (start 87.5 87.2125) (end 87.975 87.2125) (width 0.3) (layer B.Cu) (net 3) (status 10))
(segment (start 30.9575 46.5625) (end 32.72 44.8) (width 1) (layer F.Cu) (net 3) (status 20))
(segment (start 29.5 46.5625) (end 30.9575 46.5625) (width 1) (layer F.Cu) (net 3) (status 10))
(segment (start 79.4375 73) (end 80.56 73) (width 0.6) (layer F.Cu) (net 3) (status 10))
(segment (start 80.78 72.78) (end 80.56 73) (width 1) (layer F.Cu) (net 3))
(segment (start 80.78 70.2) (end 80.78 72.78) (width 1) (layer F.Cu) (net 3) (status 10))
(segment (start 83.0997 74.0997) (end 81 72) (width 0.6) (layer B.Cu) (net 3))
(segment (start 91.5 83) (end 91.5 76.514) (width 0.6) (layer B.Cu) (net 3) (status 10))
(segment (start 89.0857 74.0997) (end 83.0997 74.0997) (width 0.6) (layer B.Cu) (net 3))
(segment (start 91.5 76.514) (end 89.0857 74.0997) (width 0.6) (layer B.Cu) (net 3))
(segment (start 24.5 40.5) (end 45.5 40.5) (width 1) (layer F.Cu) (net 3) (status 20))
(via (at 79.5 70) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 3))
(segment (start 79.5 69) (end 79.5 71) (width 1) (layer F.Cu) (net 3))
(segment (start 79.7 70.2) (end 79.5 70) (width 1) (layer F.Cu) (net 3))
(segment (start 80.78 70.2) (end 79.7 70.2) (width 1) (layer F.Cu) (net 3))
(segment (start 33.75 40) (end 37 40) (width 1) (layer F.Cu) (net 3))
(segment (start 32.72 44.8) (end 32.72 41.03) (width 1) (layer F.Cu) (net 3))
(segment (start 32.72 41.03) (end 33.75 40) (width 1) (layer F.Cu) (net 3))
(segment (start 79.5 70) (end 81 70) (width 0.3) (layer B.Cu) (net 3))
(segment (start 81 72) (end 81 70) (width 0.6) (layer B.Cu) (net 3))
(segment (start 81 70) (end 81 68.5) (width 0.6) (layer B.Cu) (net 3))
(via (at 39.25 83.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 4))
(via (at 40.25 83.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 4))
(via (at 40.25 84.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 4))
(via (at 39.25 84.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 4))
(via (at 39.75 84) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 4))
(segment (start 51.5 101.675) (end 51.5 100.39) (width 0.3) (layer F.Cu) (net 4) (status 10))
(segment (start 56.175 99) (end 54.99 99) (width 0.3) (layer F.Cu) (net 4) (status 10))
(via (at 48.48 93.76) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 4))
(segment (start 48.48 92.38) (end 48.48 93.76) (width 0.6) (layer B.Cu) (net 4))
(segment (start 51.5 100.39) (end 49.74 98.55) (width 0.3) (layer F.Cu) (net 4))
(segment (start 57.675 86.5) (end 56.175 88) (width 0.3) (layer F.Cu) (net 4) (status 20))
(segment (start 58.2125 86.5) (end 57.675 86.5) (width 0.3) (layer F.Cu) (net 4) (status 10))
(segment (start 42.5 86.325) (end 42.5 85.5) (width 0.3) (layer F.Cu) (net 4) (status 10))
(segment (start 42.5 85.5) (end 42 85) (width 0.3) (layer F.Cu) (net 4))
(segment (start 38.7875 100) (end 38.5 100.2875) (width 0.3) (layer F.Cu) (net 4) (status 30))
(segment (start 40.825 100) (end 38.7875 100) (width 0.3) (layer F.Cu) (net 4) (status 30))
(segment (start 40.825 100) (end 45.02 100) (width 0.3) (layer F.Cu) (net 4) (status 10))
(segment (start 45 100.02) (end 45 101.675) (width 0.3) (layer F.Cu) (net 4) (status 20))
(segment (start 45.02 100) (end 45 100.02) (width 0.3) (layer F.Cu) (net 4))
(segment (start 45.02 100) (end 45.02 99.37) (width 0.3) (layer F.Cu) (net 4))
(segment (start 45.02 99.37) (end 46.03 98.36) (width 0.3) (layer F.Cu) (net 4))
(segment (start 45 101.675) (end 45 102.97) (width 0.3) (layer F.Cu) (net 4) (status 10))
(segment (start 45 102.97) (end 44.45 103.52) (width 0.3) (layer F.Cu) (net 4))
(segment (start 42.9425 103.52) (end 41.64 104.8225) (width 0.3) (layer F.Cu) (net 4) (status 20))
(segment (start 44.45 103.52) (end 42.9425 103.52) (width 0.3) (layer F.Cu) (net 4))
(segment (start 23.96 90.34) (end 23.96 90.79) (width 0.3) (layer B.Cu) (net 4) (status 30))
(segment (start 23.96 90.79) (end 24.77 91.6) (width 0.3) (layer B.Cu) (net 4) (status 10))
(segment (start 24.77 91.6) (end 28.2 91.6) (width 0.3) (layer B.Cu) (net 4))
(segment (start 29.2125 92.6125) (end 29.2125 93.5) (width 0.3) (layer B.Cu) (net 4) (status 20))
(segment (start 29.2125 102.5) (end 29.2125 103.6375) (width 0.3) (layer B.Cu) (net 4) (status 10))
(via (at 29.21 103.64) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 4))
(segment (start 29.2125 103.6375) (end 29.21 103.64) (width 0.3) (layer B.Cu) (net 4))
(segment (start 28.2 91.6) (end 29.21 92.46) (width 0.3) (layer B.Cu) (net 4))
(segment (start 29.21 92.46) (end 29.2125 92.6125) (width 0.3) (layer B.Cu) (net 4))
(segment (start 31.2125 72.5) (end 29.75 72.5) (width 0.3) (layer F.Cu) (net 4) (status 10))
(segment (start 29.25 73) (end 28 73) (width 0.3) (layer F.Cu) (net 4) (status 20))
(segment (start 29.75 72.5) (end 29.25 73) (width 0.3) (layer F.Cu) (net 4))
(segment (start 31.2875 72.5) (end 32.7875 71) (width 0.3) (layer F.Cu) (net 4) (status 30))
(segment (start 31.2125 72.5) (end 31.2875 72.5) (width 0.3) (layer F.Cu) (net 4) (status 30))
(segment (start 32.7875 71) (end 32.7875 69.5) (width 0.3) (layer F.Cu) (net 4) (status 30))
(segment (start 32.7875 69.5) (end 32.7875 68) (width 0.3) (layer F.Cu) (net 4) (status 30))
(segment (start 31.2875 72.5) (end 32.7875 74) (width 0.3) (layer F.Cu) (net 4) (status 30))
(segment (start 32.7875 74) (end 32.7875 77) (width 0.3) (layer F.Cu) (net 4) (status 30))
(segment (start 21 73) (end 28 73) (width 0.6) (layer F.Cu) (net 4) (status 20))
(segment (start 38.025 68.425) (end 37.45 67.85) (width 0.3) (layer B.Cu) (net 4) (status 10))
(segment (start 38.5 68.425) (end 38.025 68.425) (width 0.3) (layer B.Cu) (net 4) (status 30))
(via (at 33.81 67.88) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 4))
(segment (start 37.45 67.85) (end 33.84 67.85) (width 0.3) (layer B.Cu) (net 4))
(segment (start 33.84 67.85) (end 33.81 67.88) (width 0.3) (layer B.Cu) (net 4))
(segment (start 32.9075 67.88) (end 32.7875 68) (width 0.3) (layer F.Cu) (net 4) (status 30))
(segment (start 33.81 67.88) (end 32.9075 67.88) (width 0.3) (layer F.Cu) (net 4) (status 20))
(segment (start 33.3775 73.41) (end 32.7875 74) (width 0.3) (layer F.Cu) (net 4) (status 20))
(segment (start 36.628225 73.41) (end 33.3775 73.41) (width 0.3) (layer F.Cu) (net 4))
(segment (start 37.46 73.135) (end 36.903225 73.135) (width 0.3) (layer F.Cu) (net 4) (status 10))
(segment (start 36.903225 73.135) (end 36.628225 73.41) (width 0.3) (layer F.Cu) (net 4))
(segment (start 36.7125 78) (end 36.7125 80) (width 0.3) (layer F.Cu) (net 4) (status 30))
(segment (start 36.7125 81.8125) (end 37 82.1) (width 0.3) (layer F.Cu) (net 4) (status 30))
(segment (start 36.7125 80) (end 36.7125 81.8125) (width 0.3) (layer F.Cu) (net 4) (status 30))
(via (at 46 98) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 4))
(segment (start 46.03 98.36) (end 46.03 98.03) (width 0.3) (layer F.Cu) (net 4))
(segment (start 46.03 98.03) (end 46 98) (width 0.3) (layer F.Cu) (net 4))
(segment (start 46 98) (end 46 96.2125) (width 0.3) (layer B.Cu) (net 4) (status 20))
(segment (start 64.2675 92.2125) (end 64.25 92.23) (width 0.3) (layer B.Cu) (net 4) (status 30))
(segment (start 54.99 99) (end 54.5 98.5) (width 0.3) (layer F.Cu) (net 4))
(segment (start 53.75 98.5) (end 54.5 98.5) (width 0.6) (layer F.Cu) (net 4))
(via (at 50.25 92.34) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 4))
(segment (start 49.613604 92.34) (end 50.25 92.34) (width 0.6) (layer B.Cu) (net 4))
(segment (start 48.48 92.38) (end 48.52 92.34) (width 0.6) (layer B.Cu) (net 4))
(segment (start 48.52 92.34) (end 49.613604 92.34) (width 0.6) (layer B.Cu) (net 4))
(segment (start 50.699999 91.890001) (end 50.25 92.34) (width 0.6) (layer F.Cu) (net 4))
(segment (start 21 73) (end 21 68) (width 1) (layer F.Cu) (net 4))
(segment (start 35 54) (end 35 51.1) (width 1) (layer F.Cu) (net 4) (status 30))
(segment (start 21 68) (end 35 54) (width 1) (layer F.Cu) (net 4) (status 20))
(segment (start 37.4375 53.5375) (end 35 51.1) (width 1) (layer F.Cu) (net 4) (status 30))
(segment (start 37.4375 58) (end 37.4375 53.5375) (width 1) (layer F.Cu) (net 4) (status 30))
(segment (start 35.8125 50.2875) (end 35 51.1) (width 1) (layer F.Cu) (net 4) (status 30))
(segment (start 39.5 50.2875) (end 35.8125 50.2875) (width 1) (layer F.Cu) (net 4) (status 30))
(segment (start 58.7125 98.525) (end 58.7125 99) (width 0.6) (layer F.Cu) (net 4) (status 30))
(segment (start 59.4375 97.8) (end 58.7125 98.525) (width 0.6) (layer F.Cu) (net 4) (status 20))
(segment (start 51.045 91.545) (end 50.699999 91.890001) (width 0.6) (layer F.Cu) (net 4) (tstamp 5E039F08))
(via (at 51.045 91.545) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 4))
(segment (start 50.25 92.34) (end 51.045 91.545) (width 0.6) (layer B.Cu) (net 4))
(via (at 54 96.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 4))
(segment (start 52.875 97.625) (end 53.75 98.5) (width 0.6) (layer F.Cu) (net 4))
(segment (start 59.5 97.7375) (end 59.4375 97.8) (width 0.4) (layer F.Cu) (net 4))
(segment (start 52.875 97.625) (end 54 96.5) (width 0.6) (layer F.Cu) (net 4))
(segment (start 39.1 82.1) (end 37 82.1) (width 0.6) (layer F.Cu) (net 4) (status 20))
(segment (start 59.5 97.7375) (end 59.78 97.4575) (width 0.6) (layer F.Cu) (net 4))
(segment (start 59.78 96.473553) (end 59.78 96.12) (width 0.6) (layer F.Cu) (net 4))
(via (at 59.78 96.12) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 4))
(segment (start 59.78 97.4575) (end 59.78 96.473553) (width 0.6) (layer F.Cu) (net 4))
(segment (start 59.33 95.67) (end 59.78 96.12) (width 0.6) (layer B.Cu) (net 4))
(segment (start 54 96.5) (end 54.83 95.67) (width 0.6) (layer B.Cu) (net 4))
(segment (start 61.53 97.8) (end 59.4375 97.8) (width 0.6) (layer F.Cu) (net 4))
(segment (start 62.025 103) (end 62.6 103) (width 0.6) (layer F.Cu) (net 4) (status 10))
(segment (start 63.5 99.77) (end 61.53 97.8) (width 0.6) (layer F.Cu) (net 4))
(segment (start 63.5 102.1) (end 63.5 99.77) (width 0.6) (layer F.Cu) (net 4))
(segment (start 62.6 103) (end 63.5 102.1) (width 0.6) (layer F.Cu) (net 4))
(segment (start 49.09 97.9) (end 49.74 98.55) (width 0.3) (layer F.Cu) (net 4))
(segment (start 49.09 98.05) (end 49.09 97.9) (width 0.3) (layer F.Cu) (net 4))
(segment (start 48.6 98.54) (end 49.09 98.05) (width 0.3) (layer F.Cu) (net 4))
(segment (start 47.59 98.54) (end 48.6 98.54) (width 0.3) (layer F.Cu) (net 4))
(segment (start 47.5 101.675) (end 47.5 98.61) (width 0.3) (layer F.Cu) (net 4) (status 10))
(segment (start 56.81 95.67) (end 56.81 91.38) (width 0.4) (layer B.Cu) (net 4))
(segment (start 54.83 95.67) (end 56.81 95.67) (width 0.6) (layer B.Cu) (net 4))
(segment (start 56.81 95.67) (end 59.33 95.67) (width 0.6) (layer B.Cu) (net 4))
(segment (start 56.81 91.38) (end 57.78 90.41) (width 0.4) (layer B.Cu) (net 4))
(segment (start 59.6475 90.41) (end 61.775 92.5375) (width 0.4) (layer B.Cu) (net 4) (status 20))
(segment (start 61.775 92.5375) (end 62.25 92.5375) (width 0.4) (layer B.Cu) (net 4) (status 30))
(segment (start 57.78 90.41) (end 59.6475 90.41) (width 0.4) (layer B.Cu) (net 4))
(segment (start 51.52 96.27) (end 52.875 97.625) (width 0.6) (layer F.Cu) (net 4))
(segment (start 48.48 93.76) (end 49.36 94.64) (width 0.6) (layer F.Cu) (net 4))
(segment (start 50.99 96.27) (end 51.52 96.27) (width 0.6) (layer F.Cu) (net 4))
(segment (start 49.09 94.37) (end 49.09 97.9) (width 0.6) (layer F.Cu) (net 4))
(segment (start 48.48 93.76) (end 49.09 94.37) (width 0.6) (layer F.Cu) (net 4))
(segment (start 39.25 82.25) (end 39.1 82.1) (width 0.6) (layer F.Cu) (net 4))
(segment (start 39.25 83.5) (end 39.25 82.25) (width 0.6) (layer F.Cu) (net 4))
(segment (start 39.75 84) (end 40.25 83.5) (width 0.6) (layer F.Cu) (net 4))
(segment (start 40.25 84.5) (end 40.25 83.5) (width 0.6) (layer B.Cu) (net 4))
(segment (start 40.25 83.5) (end 39.25 83.5) (width 0.6) (layer B.Cu) (net 4))
(segment (start 39.25 83.5) (end 39.25 84.5) (width 0.6) (layer B.Cu) (net 4))
(segment (start 39.25 84.5) (end 40.25 84.5) (width 0.6) (layer B.Cu) (net 4))
(segment (start 39.75 84) (end 40.25 84.5) (width 0.6) (layer B.Cu) (net 4))
(segment (start 39.25 83.5) (end 40.25 83.5) (width 0.6) (layer F.Cu) (net 4))
(segment (start 40.25 83.5) (end 40.25 84.5) (width 0.6) (layer F.Cu) (net 4))
(segment (start 40.25 84.5) (end 39.25 84.5) (width 0.6) (layer F.Cu) (net 4))
(segment (start 39.25 84.5) (end 39.25 83.5) (width 0.6) (layer F.Cu) (net 4))
(segment (start 41.5 84.5) (end 40.25 84.5) (width 0.6) (layer F.Cu) (net 4))
(segment (start 42 85) (end 41.5 84.5) (width 0.6) (layer F.Cu) (net 4))
(segment (start 29.23 94.146425) (end 29.23 94.499978) (width 0.3) (layer B.Cu) (net 4))
(segment (start 29.21 92.46) (end 29.23 92.48) (width 0.3) (layer B.Cu) (net 4))
(via (at 29.23 94.499978) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 4))
(segment (start 29.23 92.48) (end 29.23 94.146425) (width 0.3) (layer B.Cu) (net 4))
(segment (start 29.21 103.64) (end 29.21 94.519978) (width 0.3) (layer F.Cu) (net 4))
(segment (start 29.21 94.519978) (end 29.23 94.499978) (width 0.3) (layer F.Cu) (net 4))
(segment (start 49.36 94.64) (end 50.99 96.27) (width 0.6) (layer F.Cu) (net 4) (tstamp 5E054C03))
(via (at 49.36 94.64) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 4))
(segment (start 48.48 93.76) (end 49.36 94.64) (width 0.4) (layer B.Cu) (net 4))
(segment (start 23.96 85.5296) (end 19.985 81.5546) (width 0.6) (layer B.Cu) (net 4))
(via (at 19.8834 76.2714) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 4))
(segment (start 19.985 81.5546) (end 19.985 76.373) (width 0.6) (layer B.Cu) (net 4))
(segment (start 19.985 76.373) (end 19.8834 76.2714) (width 0.6) (layer B.Cu) (net 4))
(segment (start 20.8847 76.2714) (end 19.8834 76.2714) (width 0.6) (layer F.Cu) (net 4))
(segment (start 21 76.3867) (end 20.8847 76.2714) (width 0.6) (layer F.Cu) (net 4))
(segment (start 21 76.3867) (end 21 73) (width 1) (layer F.Cu) (net 4))
(segment (start 21 77.3118) (end 21 76.3867) (width 1) (layer F.Cu) (net 4))
(segment (start 28 78.25) (end 21.9382 78.25) (width 1) (layer F.Cu) (net 4))
(segment (start 21.9382 78.25) (end 21 77.3118) (width 1) (layer F.Cu) (net 4))
(segment (start 37 82.1) (end 31.85 82.1) (width 1) (layer F.Cu) (net 4) (status 10))
(segment (start 31.85 82.1) (end 28 78.25) (width 1) (layer F.Cu) (net 4))
(segment (start 22.757919 90.34) (end 23.96 90.34) (width 0.25) (layer B.Cu) (net 4) (status 20))
(segment (start 19.65 99.25) (end 18.75 99.25) (width 0.25) (layer B.Cu) (net 4) (status 10))
(segment (start 21.169998 90.34) (end 22.757919 90.34) (width 0.25) (layer B.Cu) (net 4))
(segment (start 18.75 99.25) (end 18.5 99) (width 0.25) (layer B.Cu) (net 4))
(segment (start 18.5 93.009998) (end 21.169998 90.34) (width 0.25) (layer B.Cu) (net 4))
(segment (start 18.5 99) (end 18.5 94.25) (width 0.25) (layer B.Cu) (net 4))
(segment (start 19.65 94.25) (end 18.5 94.25) (width 0.25) (layer B.Cu) (net 4) (status 10))
(segment (start 18.5 94.25) (end 18.5 93.009998) (width 0.25) (layer B.Cu) (net 4))
(segment (start 24 88) (end 24.925 88) (width 0.3) (layer B.Cu) (net 4) (status 20))
(segment (start 23.96 87.96) (end 24 88) (width 0.3) (layer B.Cu) (net 4))
(segment (start 23.96 90.34) (end 23.96 87.96) (width 0.6) (layer B.Cu) (net 4) (status 10))
(segment (start 23.96 87.96) (end 23.96 85.5296) (width 0.6) (layer B.Cu) (net 4))
(segment (start 64.1725 92.5375) (end 64.25 92.46) (width 0.4) (layer B.Cu) (net 4) (status 30))
(segment (start 62.25 92.5375) (end 64.1725 92.5375) (width 0.4) (layer B.Cu) (net 4) (status 30))
(segment (start 64.4975 92.2125) (end 64.25 92.46) (width 0.3) (layer B.Cu) (net 4))
(segment (start 66.5 92.2125) (end 64.4975 92.2125) (width 0.3) (layer B.Cu) (net 4))
(segment (start 40.25 85.150002) (end 47.479998 92.38) (width 0.6) (layer B.Cu) (net 4))
(segment (start 40.25 84.5) (end 40.25 85.150002) (width 0.6) (layer B.Cu) (net 4))
(segment (start 47.479998 92.38) (end 48.48 92.38) (width 0.6) (layer B.Cu) (net 4))
(segment (start 33.4025 68.2875) (end 33.81 67.88) (width 0.3) (layer B.Cu) (net 4))
(segment (start 32 68.2875) (end 33.4025 68.2875) (width 0.3) (layer B.Cu) (net 4))
Improve layout, change color of B.Silk and improve schematic
2020-01-12 14:56:58 +01:00
(segment (start 53 89.59) (end 51.045 91.545) (width 0.6) (layer F.Cu) (net 4))
(segment (start 53.4725 89.59) (end 53 89.59) (width 0.3) (layer F.Cu) (net 4))
(segment (start 56.175 88) (end 55.0625 88) (width 0.3) (layer F.Cu) (net 4))
(segment (start 55.0625 88) (end 53.4725 89.59) (width 0.3) (layer F.Cu) (net 4))
(segment (start 46.03 98.36) (end 46.21 98.54) (width 0.3) (layer F.Cu) (net 4))
(segment (start 46.21 98.54) (end 47.57 98.54) (width 0.3) (layer F.Cu) (net 4))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(segment (start 39.5 50.725) (end 39.5 50.2875) (width 0.6) (layer F.Cu) (net 4))
(segment (start 39.525 50.75) (end 39.5 50.725) (width 0.6) (layer F.Cu) (net 4))
(segment (start 48.75 50.75) (end 39.525 50.75) (width 0.6) (layer F.Cu) (net 4))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(segment (start 73 67.1) (end 73 64.875) (width 1) (layer F.Cu) (net 5) (status 30))
(segment (start 70.375 67.1) (end 70 67.475) (width 1) (layer F.Cu) (net 5) (status 30))
(segment (start 73 67.1) (end 70.375 67.1) (width 1) (layer F.Cu) (net 5) (status 30))
(segment (start 66.5 71.46) (end 66.5 70.975) (width 0.6) (layer F.Cu) (net 5) (status 30))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(segment (start 70.45 67.95) (end 69.9875 67.4875) (width 0.6) (layer F.Cu) (net 5))
(segment (start 70.45 73.1) (end 70.45 67.95) (width 0.6) (layer F.Cu) (net 5))
(segment (start 66.5 70.975) (end 69.9875 67.4875) (width 0.6) (layer F.Cu) (net 5))
(segment (start 69.9875 67.4875) (end 70 67.475) (width 0.6) (layer F.Cu) (net 5))
Re-annotate components
2020-02-05 18:58:36 +01:00
(segment (start 30.7875 93.5) (end 30.7875 95.5) (width 0.3) (layer B.Cu) (net 6) (status 30))
(segment (start 32.42 95.5) (end 32.5 95.42) (width 0.3) (layer B.Cu) (net 6) (status 30))
(segment (start 30.7875 95.5) (end 32.42 95.5) (width 0.3) (layer B.Cu) (net 6) (status 30))
(segment (start 53.5 101.675) (end 53.5 102.98) (width 0.3) (layer F.Cu) (net 6) (status 10))
(via (at 54.86 103.61) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 6))
(segment (start 53.5 102.98) (end 54.13 103.61) (width 0.3) (layer F.Cu) (net 6))
(segment (start 54.13 103.61) (end 54.86 103.61) (width 0.3) (layer F.Cu) (net 6))
(segment (start 54.26 104.21) (end 54.86 103.61) (width 0.25) (layer B.Cu) (net 6))
(segment (start 52.64 104.21) (end 54.26 104.21) (width 0.25) (layer B.Cu) (net 6))
(segment (start 38.85 101.77) (end 50.2 101.77) (width 0.3) (layer B.Cu) (net 6))
(segment (start 32.5 95.42) (end 38.85 101.77) (width 0.3) (layer B.Cu) (net 6) (status 10))
(segment (start 50.2 101.77) (end 52.64 104.21) (width 0.3) (layer B.Cu) (net 6))
(segment (start 30.7875 100.5) (end 32.5 100.5) (width 0.3) (layer B.Cu) (net 7) (status 30))
(segment (start 30.7875 102.5) (end 30.7875 100.5) (width 0.3) (layer B.Cu) (net 7) (status 30))
(segment (start 54 101.675) (end 54 102.73) (width 0.3) (layer F.Cu) (net 7) (status 10))
(via (at 55.7 103.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 7))
(segment (start 54 102.73) (end 54.27 103) (width 0.3) (layer F.Cu) (net 7))
(segment (start 54.27 103) (end 55.5 103) (width 0.3) (layer F.Cu) (net 7))
(segment (start 55.7 103.2) (end 55.7 103.75) (width 0.3) (layer F.Cu) (net 7))
(segment (start 55.5 103) (end 55.7 103.2) (width 0.3) (layer F.Cu) (net 7))
(segment (start 49.98 102.54) (end 52.44 105) (width 0.3) (layer B.Cu) (net 7))
(segment (start 34.54 102.54) (end 49.98 102.54) (width 0.3) (layer B.Cu) (net 7))
(segment (start 55.238001 105.000001) (end 55.7 104.538002) (width 0.3) (layer B.Cu) (net 7))
(segment (start 52.44 105) (end 55.238001 105.000001) (width 0.3) (layer B.Cu) (net 7))
(segment (start 32.5 100.5) (end 34.54 102.54) (width 0.3) (layer B.Cu) (net 7) (status 10))
(segment (start 55.7 104.538002) (end 55.7 104.103553) (width 0.3) (layer B.Cu) (net 7))
(segment (start 55.7 104.103553) (end 55.7 103.75) (width 0.3) (layer B.Cu) (net 7))
(segment (start 53 99.2875) (end 51.5 99.2875) (width 0.3) (layer B.Cu) (net 8) (status 30))
(segment (start 53 99.2875) (end 54.5 99.2875) (width 0.3) (layer B.Cu) (net 8) (status 30))
(via (at 53 100.000056) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 8))
(segment (start 52.5 100.500056) (end 53 100.000056) (width 0.3) (layer F.Cu) (net 8))
(segment (start 53 99.2875) (end 53 100.000056) (width 0.3) (layer B.Cu) (net 8) (status 10))
(segment (start 52.5 101.675) (end 52.5 100.500056) (width 0.3) (layer F.Cu) (net 8) (status 10))
(segment (start 32.88 92.5) (end 32.5 92.88) (width 0.3) (layer F.Cu) (net 9) (status 30))
(segment (start 40.825 92.5) (end 32.88 92.5) (width 0.3) (layer F.Cu) (net 9) (status 30))
(segment (start 32.62 93) (end 32.5 92.88) (width 0.3) (layer B.Cu) (net 9) (status 30))
(segment (start 34.7125 93) (end 32.62 93) (width 0.3) (layer B.Cu) (net 9) (status 30))
(segment (start 67.5 86.5) (end 65.7125 86.5) (width 0.3) (layer B.Cu) (net 10) (status 30))
(segment (start 65.7125 86.5) (end 65.5 86.7125) (width 0.3) (layer B.Cu) (net 10) (status 30))
(segment (start 67.5 86.5) (end 67.5 86.25) (width 0.4) (layer F.Cu) (net 10) (status 30))
(segment (start 75.35 87.05) (end 75.05 87.35) (width 0.25) (layer F.Cu) (net 10))
(segment (start 75.35 86.95) (end 75.35 87.05) (width 0.25) (layer F.Cu) (net 10))
(segment (start 74.470147 87.303406) (end 74.116594 87.303406) (width 0.4) (layer F.Cu) (net 10))
(segment (start 74.116594 85.736594) (end 74.116594 86.949853) (width 0.4) (layer B.Cu) (net 10))
(via (at 74.116594 87.303406) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 10))
(segment (start 75.003406 87.303406) (end 74.470147 87.303406) (width 0.4) (layer F.Cu) (net 10))
(segment (start 67.5 85.25) (end 67.87 84.88) (width 0.4) (layer B.Cu) (net 10))
(segment (start 73.26 84.88) (end 74.116594 85.736594) (width 0.4) (layer B.Cu) (net 10))
(segment (start 67.87 84.88) (end 73.26 84.88) (width 0.4) (layer B.Cu) (net 10))
(segment (start 74.116594 86.949853) (end 74.116594 87.303406) (width 0.4) (layer B.Cu) (net 10))
(segment (start 67.5 86.5) (end 67.5 85.25) (width 0.4) (layer B.Cu) (net 10))
(segment (start 66.57 87.71) (end 68.71 87.71) (width 0.3) (layer B.Cu) (net 11))
(segment (start 68.71 87.71) (end 70.04 89.04) (width 0.3) (layer B.Cu) (net 11) (status 20))
(segment (start 65.9925 88.2875) (end 66.57 87.71) (width 0.3) (layer B.Cu) (net 11))
(segment (start 65.5 88.2875) (end 65.9925 88.2875) (width 0.3) (layer B.Cu) (net 11) (status 10))
(segment (start 72.32 89.04) (end 70.04 89.04) (width 0.4) (layer B.Cu) (net 11) (status 20))
(segment (start 72.97 88.39) (end 72.32 89.04) (width 0.4) (layer B.Cu) (net 11))
(segment (start 72.97 86.18) (end 72.97 88.39) (width 0.4) (layer B.Cu) (net 11))
(segment (start 75.05 84.65) (end 73.3625 84.65) (width 0.4) (layer F.Cu) (net 11) (status 30))
(segment (start 75.35 84.95) (end 75.05 84.65) (width 0.25) (layer F.Cu) (net 11))
(segment (start 75.35 85.05) (end 75.35 84.95) (width 0.25) (layer F.Cu) (net 11))
(segment (start 73 86.15) (end 72.981594 86.168406) (width 0.3) (layer F.Cu) (net 11))
(segment (start 72.97 86.18) (end 72.981594 86.168406) (width 0.3) (layer B.Cu) (net 11))
(segment (start 73 84.2875) (end 73 86.15) (width 0.3) (layer F.Cu) (net 11))
(via (at 72.981594 86.168406) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 11))
(segment (start 70.25 86.5) (end 70.04 86.5) (width 0.3) (layer F.Cu) (net 12))
(segment (start 77.4875 95.3) (end 78.5 94.2875) (width 0.3) (layer F.Cu) (net 12))
(segment (start 78.5 94.2875) (end 78.5 91.25) (width 0.3) (layer F.Cu) (net 12))
(segment (start 73.5 89.75) (end 70.25 86.5) (width 0.3) (layer F.Cu) (net 12))
(segment (start 77.15 95.3) (end 77.4875 95.3) (width 0.3) (layer F.Cu) (net 12))
(segment (start 78.5 91.25) (end 77 89.75) (width 0.3) (layer F.Cu) (net 12))
(segment (start 77 89.75) (end 73.5 89.75) (width 0.3) (layer F.Cu) (net 12))
(segment (start 66.25 85) (end 64.5 86.75) (width 0.3) (layer F.Cu) (net 12))
(segment (start 70.04 86.5) (end 68.54 85) (width 0.3) (layer F.Cu) (net 12))
(segment (start 64.5 86.75) (end 64.5 87.2125) (width 0.3) (layer F.Cu) (net 12))
(segment (start 68.54 85) (end 66.25 85) (width 0.3) (layer F.Cu) (net 12))
(segment (start 64.5 87.2125) (end 63 87.2125) (width 0.3) (layer F.Cu) (net 12))
(segment (start 70.175 90.25) (end 71.15 91.225) (width 0.25) (layer F.Cu) (net 13))
(segment (start 68.71 90.25) (end 70.175 90.25) (width 0.25) (layer F.Cu) (net 13))
(segment (start 71.15 91.225) (end 71.15 91.8) (width 0.25) (layer F.Cu) (net 13))
(segment (start 67.5 89.04) (end 68.71 90.25) (width 0.25) (layer F.Cu) (net 13))
(segment (start 67.072501 88.612501) (end 67.5 89.04) (width 0.4) (layer F.Cu) (net 13))
(segment (start 63 88.7875) (end 64.5 88.7875) (width 0.3) (layer F.Cu) (net 13))
(segment (start 67.2475 88.7875) (end 67.5 89.04) (width 0.3) (layer F.Cu) (net 13))
(segment (start 64.5 88.7875) (end 67.2475 88.7875) (width 0.3) (layer F.Cu) (net 13))
(segment (start 30.6125 68.6) (end 31.2125 68) (width 0.3) (layer F.Cu) (net 14) (status 20))
(segment (start 28 68.6) (end 30.6125 68.6) (width 0.3) (layer F.Cu) (net 14) (status 10))
(segment (start 47 65.97) (end 47 86.325) (width 0.3) (layer F.Cu) (net 14) (status 20))
(segment (start 44.39 63.36) (end 47 65.97) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.66 63.36) (end 44.39 63.36) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.46 64.198683) (end 38.526756 64.191161) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.752478 63.965439) (end 38.76 63.898683) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.526756 64.191161) (end 38.590165 64.168973) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.393243 64.191161) (end 38.46 64.198683) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.22545 64.085729) (end 38.272953 64.133232) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.352478 62.754561) (end 39.36 62.821317) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.190165 62.551027) (end 39.247046 62.586768) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.06 62.521317) (end 39.126756 62.528839) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.647046 64.133232) (end 38.694549 64.085729) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.16 63.898683) (end 38.167521 63.965439) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.329834 64.168973) (end 38.393243 64.191161) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.590165 64.168973) (end 38.647046 64.133232) (width 0.3) (layer F.Cu) (net 14))
(segment (start 37.86 63.36) (end 37.926756 63.367521) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.13029 63.529834) (end 38.152478 63.593243) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.82545 62.634271) (end 38.872953 62.586768) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.16 63.66) (end 38.16 63.898683) (width 0.3) (layer F.Cu) (net 14))
(segment (start 31.2125 68) (end 31.2125 67.525) (width 0.3) (layer F.Cu) (net 14) (status 30))
(segment (start 38.167521 63.965439) (end 38.189709 64.028848) (width 0.3) (layer F.Cu) (net 14))
(segment (start 37.926756 63.367521) (end 37.990165 63.389709) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.593243 63.352479) (end 39.66 63.36) (width 0.3) (layer F.Cu) (net 14))
(segment (start 31.2125 67.525) (end 35.3775 63.36) (width 0.3) (layer F.Cu) (net 14) (status 10))
(segment (start 37.990165 63.389709) (end 38.047046 63.42545) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.789709 62.691152) (end 38.82545 62.634271) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.094549 63.472953) (end 38.13029 63.529834) (width 0.3) (layer F.Cu) (net 14))
(segment (start 35.3775 63.36) (end 37.86 63.36) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.73029 64.028848) (end 38.752478 63.965439) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.76 63.898683) (end 38.76 62.821317) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.76 62.821317) (end 38.767521 62.754561) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.047046 63.42545) (end 38.094549 63.472953) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.767521 62.754561) (end 38.789709 62.691152) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.42545 63.247047) (end 39.472953 63.29455) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.872953 62.586768) (end 38.929834 62.551027) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.929834 62.551027) (end 38.993243 62.528839) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.694549 64.085729) (end 38.73029 64.028848) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.189709 64.028848) (end 38.22545 64.085729) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.993243 62.528839) (end 39.06 62.521317) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.36 63.06) (end 39.367521 63.126757) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.126756 62.528839) (end 39.190165 62.551027) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.247046 62.586768) (end 39.294549 62.634271) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.472953 63.29455) (end 39.529834 63.330291) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.294549 62.634271) (end 39.33029 62.691152) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.272953 64.133232) (end 38.329834 64.168973) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.389709 63.190166) (end 39.42545 63.247047) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.367521 63.126757) (end 39.389709 63.190166) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.33029 62.691152) (end 39.352478 62.754561) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.36 62.821317) (end 39.36 63.06) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.152478 63.593243) (end 38.16 63.66) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.529834 63.330291) (end 39.593243 63.352479) (width 0.3) (layer F.Cu) (net 14))
(segment (start 31.0125 69.7) (end 31.2125 69.5) (width 0.3) (layer F.Cu) (net 15) (status 30))
(segment (start 28 69.7) (end 31.0125 69.7) (width 0.3) (layer F.Cu) (net 15) (status 30))
(via (at 25.88 69.47) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 15))
(segment (start 28 69.7) (end 26.11 69.7) (width 0.3) (layer F.Cu) (net 15) (status 10))
(segment (start 26.11 69.7) (end 25.88 69.47) (width 0.3) (layer F.Cu) (net 15))
(via (at 42.86 92.26) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 15))
(segment (start 47.5 86.325) (end 47.5 87.62) (width 0.3) (layer F.Cu) (net 15) (status 10))
(segment (start 47.5 87.62) (end 43.109999 92.010001) (width 0.3) (layer F.Cu) (net 15))
(segment (start 43.109999 92.010001) (end 42.86 92.26) (width 0.3) (layer F.Cu) (net 15))
(segment (start 28.658992 72.238355) (end 28.606471 72.196471) (width 0.3) (layer B.Cu) (net 15))
(segment (start 28.785013 72.282452) (end 28.719518 72.267503) (width 0.3) (layer B.Cu) (net 15))
(segment (start 28.852191 72.282452) (end 28.785013 72.282452) (width 0.3) (layer B.Cu) (net 15))
(segment (start 28.917686 72.267503) (end 28.852191 72.282452) (width 0.3) (layer B.Cu) (net 15))
(segment (start 28.978212 72.238355) (end 28.917686 72.267503) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.030734 72.19647) (end 28.978212 72.238355) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.102699 72.124506) (end 29.030734 72.19647) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.155222 72.08262) (end 29.102699 72.124506) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.215748 72.053473) (end 29.155222 72.08262) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.281242 72.038524) (end 29.215748 72.053473) (width 0.3) (layer B.Cu) (net 15))
(segment (start 28.606471 72.196471) (end 27.752909 71.342909) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.413114 72.673258) (end 29.455 72.620735) (width 0.3) (layer B.Cu) (net 15))
(segment (start 27.752909 71.342909) (end 25.88 69.47) (width 0.3) (layer B.Cu) (net 15))
(segment (start 32.5 83.9825) (end 32.5 76.09) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.348421 72.038524) (end 29.281242 72.038524) (width 0.3) (layer B.Cu) (net 15))
(segment (start 40.7775 92.26) (end 32.5 83.9825) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.383967 72.931951) (end 29.369018 72.866457) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.597997 72.435722) (end 29.612946 72.370227) (width 0.3) (layer B.Cu) (net 15))
(segment (start 42.86 92.26) (end 40.7775 92.26) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.383967 72.733784) (end 29.413114 72.673258) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.526964 72.124506) (end 29.474441 72.08262) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.597997 72.237554) (end 29.568849 72.177028) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.369018 72.799278) (end 29.383967 72.733784) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.369018 72.866457) (end 29.369018 72.799278) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.612946 72.370227) (end 29.612946 72.303049) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.413114 72.992477) (end 29.383967 72.931951) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.568849 72.496248) (end 29.597997 72.435722) (width 0.3) (layer B.Cu) (net 15))
(segment (start 28.719518 72.267503) (end 28.658992 72.238355) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.455 73.045) (end 29.413114 72.992477) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.526964 72.54877) (end 29.568849 72.496248) (width 0.3) (layer B.Cu) (net 15))
(segment (start 32.5 76.09) (end 29.455 73.045) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.455 72.620735) (end 29.526964 72.54877) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.612946 72.303049) (end 29.597997 72.237554) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.568849 72.177028) (end 29.526964 72.124506) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.474441 72.08262) (end 29.413915 72.053473) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.413915 72.053473) (end 29.348421 72.038524) (width 0.3) (layer B.Cu) (net 15))
(segment (start 30 71) (end 31.2125 71) (width 0.3) (layer F.Cu) (net 16) (status 20))
(segment (start 28 71.9) (end 29.1 71.9) (width 0.3) (layer F.Cu) (net 16) (status 10))
(segment (start 29.1 71.9) (end 30 71) (width 0.3) (layer F.Cu) (net 16))
(via (at 30.83 85.24) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 16))
(via (at 26 71.92) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 16))
(segment (start 27.98 71.92) (end 28 71.9) (width 0.3) (layer F.Cu) (net 16) (status 30))
(segment (start 26 71.92) (end 27.98 71.92) (width 0.3) (layer F.Cu) (net 16) (status 20))
(segment (start 30.83 85.42) (end 30.83 85.24) (width 0.3) (layer F.Cu) (net 16))
(segment (start 40.825 90) (end 35.41 90) (width 0.3) (layer F.Cu) (net 16) (status 10))
(segment (start 35.41 90) (end 30.83 85.42) (width 0.3) (layer F.Cu) (net 16))
(segment (start 26.17 71.92) (end 26 71.92) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.5 76.25) (end 26.17 71.92) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.43455 77.787046) (end 30.470291 77.730165) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.387047 77.834549) (end 30.43455 77.787046) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.330166 77.87029) (end 30.387047 77.834549) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.266757 77.892478) (end 30.330166 77.87029) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.2 77.9) (end 30.266757 77.892478) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.84159 77.9) (end 30.2 77.9) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.774834 77.907521) (end 29.84159 77.9) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.711425 77.929709) (end 29.774834 77.907521) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.774834 78.492478) (end 29.711425 78.47029) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.84159 78.5) (end 29.774834 78.492478) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.10841 78.5) (end 29.84159 78.5) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.295456 78.56545) (end 31.238575 78.529709) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.342959 78.612953) (end 31.295456 78.56545) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.3787 78.669834) (end 31.342959 78.612953) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.400888 78.866756) (end 31.40841 78.8) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.342959 78.987046) (end 31.3787 78.930165) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.295456 79.034549) (end 31.342959 78.987046) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.238575 79.07029) (end 31.295456 79.034549) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.54159 78.2) (end 29.549112 78.133243) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.175166 79.092478) (end 31.238575 79.07029) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.3787 81.330165) (end 31.400888 81.266756) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.238575 79.729709) (end 31.175166 79.707521) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.5713 78.330165) (end 29.549112 78.266756) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.84159 79.1) (end 31.10841 79.1) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.238575 81.47029) (end 31.295456 81.434549) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.295456 82.16545) (end 31.238575 82.129709) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.607041 78.387046) (end 29.5713 78.330165) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.774834 79.107521) (end 29.84159 79.1) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.175166 81.492478) (end 31.238575 81.47029) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.711425 79.129709) (end 29.774834 79.107521) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.10841 81.5) (end 31.175166 81.492478) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.10841 80.3) (end 31.175166 80.292478) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.5713 81.669834) (end 29.607041 81.612953) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.549112 81.866756) (end 29.54159 81.8) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.400888 81.266756) (end 31.40841 81.2) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.654544 81.56545) (end 29.711425 81.529709) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.470291 77.730165) (end 30.492479 77.666756) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.238575 80.929709) (end 31.175166 80.907521) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.607041 81.987046) (end 29.5713 81.930165) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.175166 78.507521) (end 31.10841 78.5) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.295456 80.96545) (end 31.238575 80.929709) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.654544 82.034549) (end 29.607041 81.987046) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.711425 78.47029) (end 29.654544 78.434549) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.654544 79.634549) (end 29.607041 79.587046) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.40841 82.4) (end 31.400888 82.333243) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.774834 82.092478) (end 29.711425 82.07029) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.549112 80.533243) (end 29.5713 80.469834) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.84159 82.1) (end 29.774834 82.092478) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.175166 82.107521) (end 31.10841 82.1) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.5 83) (end 30.507521 82.933243) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.654544 78.434549) (end 29.607041 78.387046) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.400888 82.333243) (end 31.3787 82.269834) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.711425 81.529709) (end 29.774834 81.507521) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.400888 79.933243) (end 31.3787 79.869834) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.5 84.91) (end 30.5 83) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.342959 81.387046) (end 31.3787 81.330165) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.84159 80.9) (end 29.774834 80.892478) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.549112 78.266756) (end 29.54159 78.2) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.10841 79.1) (end 31.175166 79.092478) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.295456 81.434549) (end 31.342959 81.387046) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.5713 80.469834) (end 29.607041 80.412953) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.612953 82.76545) (end 30.669834 82.729709) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.238575 82.67029) (end 31.295456 82.634549) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.549112 81.733243) (end 29.5713 81.669834) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.238575 78.529709) (end 31.175166 78.507521) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.711425 82.07029) (end 29.654544 82.034549) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.342959 81.012953) (end 31.295456 80.96545) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.733243 82.707521) (end 30.8 82.7) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.549112 78.133243) (end 29.5713 78.069834) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.295456 82.634549) (end 31.342959 82.587046) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.10841 82.1) (end 29.84159 82.1) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.54159 81.8) (end 29.549112 81.733243) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.5713 78.069834) (end 29.607041 78.012953) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.342959 82.587046) (end 31.3787 82.530165) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.83 85.24) (end 30.5 84.91) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.607041 78.012953) (end 29.654544 77.96545) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.3787 82.530165) (end 31.400888 82.466756) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.10841 82.7) (end 31.175166 82.692478) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.607041 81.612953) (end 29.654544 81.56545) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.774834 79.692478) (end 29.711425 79.67029) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.175166 82.692478) (end 31.238575 82.67029) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.84159 80.3) (end 31.10841 80.3) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.40841 80) (end 31.400888 79.933243) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.711425 79.67029) (end 29.654544 79.634549) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.40841 78.8) (end 31.400888 78.733243) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.10841 79.7) (end 29.84159 79.7) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.607041 79.587046) (end 29.5713 79.530165) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.654544 77.96545) (end 29.711425 77.929709) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.400888 82.466756) (end 31.40841 82.4) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.56545 82.812953) (end 30.612953 82.76545) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.529709 82.869834) (end 30.56545 82.812953) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.3787 78.930165) (end 31.400888 78.866756) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.238575 82.129709) (end 31.175166 82.107521) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.711425 80.329709) (end 29.774834 80.307521) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.40841 81.2) (end 31.400888 81.133243) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.5 77.6) (end 30.5 76.25) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.3787 81.069834) (end 31.342959 81.012953) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.5713 81.930165) (end 29.549112 81.866756) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.175166 80.907521) (end 31.10841 80.9) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.175166 80.292478) (end 31.238575 80.27029) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.507521 82.933243) (end 30.529709 82.869834) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.10841 80.9) (end 29.84159 80.9) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.774834 80.892478) (end 29.711425 80.87029) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.711425 80.87029) (end 29.654544 80.834549) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.342959 80.187046) (end 31.3787 80.130165) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.654544 80.834549) (end 29.607041 80.787046) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.3787 80.130165) (end 31.400888 80.066756) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.607041 80.787046) (end 29.5713 80.730165) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.400888 80.066756) (end 31.40841 80) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.5713 80.730165) (end 29.549112 80.666756) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.549112 80.666756) (end 29.54159 80.6) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.238575 80.27029) (end 31.295456 80.234549) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.8 82.7) (end 31.10841 82.7) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.54159 80.6) (end 29.549112 80.533243) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.3787 82.269834) (end 31.342959 82.212953) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.774834 81.507521) (end 29.84159 81.5) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.607041 80.412953) (end 29.654544 80.36545) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.342959 82.212953) (end 31.295456 82.16545) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.84159 81.5) (end 31.10841 81.5) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.654544 80.36545) (end 29.711425 80.329709) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.492479 77.666756) (end 30.5 77.6) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.400888 81.133243) (end 31.3787 81.069834) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.774834 80.307521) (end 29.84159 80.3) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.295456 80.234549) (end 31.342959 80.187046) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.549112 79.333243) (end 29.5713 79.269834) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.669834 82.729709) (end 30.733243 82.707521) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.342959 79.812953) (end 31.295456 79.76545) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.5713 79.269834) (end 29.607041 79.212953) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.295456 79.76545) (end 31.238575 79.729709) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.607041 79.212953) (end 29.654544 79.16545) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.175166 79.707521) (end 31.10841 79.7) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.400888 78.733243) (end 31.3787 78.669834) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.84159 79.7) (end 29.774834 79.692478) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.5713 79.530165) (end 29.549112 79.466756) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.549112 79.466756) (end 29.54159 79.4) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.3787 79.869834) (end 31.342959 79.812953) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.54159 79.4) (end 29.549112 79.333243) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.654544 79.16545) (end 29.711425 79.129709) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.1125 74.1) (end 31.2125 74) (width 0.3) (layer F.Cu) (net 17) (status 30))
(segment (start 28 74.1) (end 31.1125 74.1) (width 0.3) (layer F.Cu) (net 17) (status 30))
(via (at 29.89 85.51) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 17))
(via (at 26.48 74.11) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 17))
(segment (start 27.99 74.11) (end 28 74.1) (width 0.3) (layer F.Cu) (net 17) (status 30))
(segment (start 26.48 74.11) (end 27.99 74.11) (width 0.3) (layer F.Cu) (net 17) (status 20))
(segment (start 29 84.62) (end 29.89 85.51) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27 82) (end 29 84) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.887046 81.06545) (end 26.934549 81.112953) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.830165 81.029709) (end 26.887046 81.06545) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.7 81) (end 26.766756 81.007521) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.3 81) (end 26.7 81) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.112953 80.934549) (end 26.169834 80.97029) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.06545 80.887046) (end 26.112953 80.934549) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.029709 80.830165) (end 26.06545 80.887046) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.112953 80.46545) (end 26.06545 80.512953) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.3 80.4) (end 26.233243 80.407521) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.7 80.4) (end 26.3 80.4) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.830166 80.37029) (end 27.766757 80.392478) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.007521 78.233243) (end 26 78.3) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.992478 81.233243) (end 27 81.3) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.169834 78.029709) (end 26.112953 78.06545) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.233243 80.992478) (end 26.3 81) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.112953 77.334549) (end 26.169834 77.37029) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.233243 78.007521) (end 26.169834 78.029709) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.112953 79.734549) (end 26.169834 79.77029) (width 0.3) (layer B.Cu) (net 17))
(segment (start 28 78.9) (end 27.992479 78.966756) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.830166 77.429709) (end 27.887047 77.46545) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.06545 78.112953) (end 26.029709 78.169834) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.3 77.4) (end 27.7 77.4) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.029709 78.169834) (end 26.007521 78.233243) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.887047 77.934549) (end 27.830166 77.97029) (width 0.3) (layer B.Cu) (net 17))
(segment (start 28 77.7) (end 27.992479 77.766756) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.934549 81.112953) (end 26.97029 81.169834) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.007521 79.433243) (end 26 79.5) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.169834 79.77029) (end 26.233243 79.792478) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.112953 78.06545) (end 26.06545 78.112953) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.7 78) (end 26.3 78) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.93455 77.512953) (end 27.970291 77.569834) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.97029 81.169834) (end 26.992478 81.233243) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.830165 76.77029) (end 26.766756 76.792478) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.93455 80.287046) (end 27.887047 80.334549) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.970291 79.969834) (end 27.992479 80.033243) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.887046 76.734549) (end 26.830165 76.77029) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27 76.5) (end 26.992478 76.566756) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27 74.63) (end 27 76.5) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.233243 77.392478) (end 26.3 77.4) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.007521 77.166756) (end 26.029709 77.230165) (width 0.3) (layer B.Cu) (net 17))
(segment (start 29 84) (end 29 84.62) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.766757 77.992478) (end 27.7 78) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.233243 79.792478) (end 26.3 79.8) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.830166 79.829709) (end 27.887047 79.86545) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.48 74.11) (end 27 74.63) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26 77.1) (end 26.007521 77.166756) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27 81.3) (end 27 82) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.766757 77.407521) (end 27.830166 77.429709) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.992479 78.833243) (end 28 78.9) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.934549 76.687046) (end 26.887046 76.734549) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.970291 77.830165) (end 27.93455 77.887046) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.830166 77.97029) (end 27.766757 77.992478) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.169834 80.97029) (end 26.233243 80.992478) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26 80.7) (end 26.007521 80.766756) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.3 76.8) (end 26.233243 76.807521) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.3 78) (end 26.233243 78.007521) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.887047 77.46545) (end 27.93455 77.512953) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.029709 79.630165) (end 26.06545 79.687046) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.029709 77.230165) (end 26.06545 77.287046) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.233243 78.592478) (end 26.3 78.6) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.233243 79.207521) (end 26.169834 79.229709) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.766756 76.792478) (end 26.7 76.8) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.7 76.8) (end 26.3 76.8) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.766757 80.392478) (end 27.7 80.4) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.830166 78.629709) (end 27.887047 78.66545) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.007521 80.766756) (end 26.029709 80.830165) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.887047 79.86545) (end 27.93455 79.912953) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.992479 78.966756) (end 27.970291 79.030165) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.7 77.4) (end 27.766757 77.407521) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.93455 79.087046) (end 27.887047 79.134549) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.97029 76.630165) (end 26.934549 76.687046) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.007521 80.633243) (end 26 80.7) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.029709 80.569834) (end 26.007521 80.633243) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.112953 79.26545) (end 26.06545 79.312953) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.233243 76.807521) (end 26.169834 76.829709) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.7 79.8) (end 27.766757 79.807521) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.169834 77.37029) (end 26.233243 77.392478) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.169834 76.829709) (end 26.112953 76.86545) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.06545 77.287046) (end 26.112953 77.334549) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.887047 79.134549) (end 27.830166 79.17029) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.992478 76.566756) (end 26.97029 76.630165) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.06545 76.912953) (end 26.029709 76.969834) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.992479 77.766756) (end 27.970291 77.830165) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.7 79.2) (end 26.3 79.2) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.007521 77.033243) (end 26 77.1) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.766756 81.007521) (end 26.830165 81.029709) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26 78.3) (end 26.007521 78.366756) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.06545 80.512953) (end 26.029709 80.569834) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.007521 78.366756) (end 26.029709 78.430165) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.169834 80.429709) (end 26.112953 80.46545) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.06545 78.487046) (end 26.112953 78.534549) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.169834 78.57029) (end 26.233243 78.592478) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.93455 78.712953) (end 27.970291 78.769834) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.3 78.6) (end 27.7 78.6) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.7 78.6) (end 27.766757 78.607521) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.112953 78.534549) (end 26.169834 78.57029) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.766757 78.607521) (end 27.830166 78.629709) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.887047 78.66545) (end 27.93455 78.712953) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.029709 78.430165) (end 26.06545 78.487046) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.970291 78.769834) (end 27.992479 78.833243) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.3 79.8) (end 27.7 79.8) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.970291 79.030165) (end 27.93455 79.087046) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.830166 79.17029) (end 27.766757 79.192478) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.766757 79.192478) (end 27.7 79.2) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.992479 77.633243) (end 28 77.7) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.3 79.2) (end 26.233243 79.207521) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.970291 77.569834) (end 27.992479 77.633243) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.169834 79.229709) (end 26.112953 79.26545) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26 79.5) (end 26.007521 79.566756) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.029709 79.369834) (end 26.007521 79.433243) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.06545 79.312953) (end 26.029709 79.369834) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.93455 77.887046) (end 27.887047 77.934549) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.007521 79.566756) (end 26.029709 79.630165) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.06545 79.687046) (end 26.112953 79.734549) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.766757 79.807521) (end 27.830166 79.829709) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.992479 80.033243) (end 28 80.1) (width 0.3) (layer B.Cu) (net 17))
(segment (start 28 80.1) (end 27.992479 80.166756) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.233243 80.407521) (end 26.169834 80.429709) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.93455 79.912953) (end 27.970291 79.969834) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.992479 80.166756) (end 27.970291 80.230165) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.112953 76.86545) (end 26.06545 76.912953) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.970291 80.230165) (end 27.93455 80.287046) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.029709 76.969834) (end 26.007521 77.033243) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.887047 80.334549) (end 27.830166 80.37029) (width 0.3) (layer B.Cu) (net 17))
(segment (start 29.9 85.51) (end 29.89 85.51) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.16545 90.612953) (end 38.129709 90.669834) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.506268 91.805631) (end 37.493731 91.69437) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.4 90.5) (end 38.333243 90.507521) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.530165 90.529709) (end 38.466756 90.507521) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.587046 90.56545) (end 38.530165 90.529709) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.269834 90.529709) (end 38.212953 90.56545) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.129709 90.669834) (end 38.107521 90.733243) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.75 92) (end 37.694369 91.993732) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.869834 91.47029) (end 38.812953 91.434549) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.812953 91.434549) (end 38.76545 91.387046) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.67029 90.669834) (end 38.634549 90.612953) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.333243 90.507521) (end 38.269834 90.529709) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.1 90.8) (end 38.1 91.75) (width 0.3) (layer F.Cu) (net 17))
(segment (start 35.89 91.5) (end 29.9 85.51) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.692478 90.733243) (end 38.67029 90.669834) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.85 92) (end 37.75 92) (width 0.3) (layer F.Cu) (net 17))
(segment (start 39 91.5) (end 38.933243 91.492478) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.107521 90.733243) (end 38.1 90.8) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.466756 90.507521) (end 38.4 90.5) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.76545 91.387046) (end 38.729709 91.330165) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.7 90.8) (end 38.692478 90.733243) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.212953 90.56545) (end 38.16545 90.612953) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.707521 91.266756) (end 38.7 91.2) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.7 91.2) (end 38.7 90.8) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.1 91.75) (end 38.093731 91.805631) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.093731 91.805631) (end 38.075242 91.858471) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.045457 91.905873) (end 38.005872 91.945458) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.95847 91.975243) (end 37.90563 91.993732) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.933243 91.492478) (end 38.869834 91.47029) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.005872 91.945458) (end 37.95847 91.975243) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.90563 91.993732) (end 37.85 92) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.694369 91.993732) (end 37.641529 91.975243) (width 0.3) (layer F.Cu) (net 17))
(segment (start 40.825 91.5) (end 39 91.5) (width 0.3) (layer F.Cu) (net 17) (status 10))
(segment (start 37.641529 91.975243) (end 37.594127 91.945458) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.594127 91.945458) (end 37.554542 91.905873) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.35847 91.524758) (end 37.30563 91.506269) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.634549 90.612953) (end 38.587046 90.56545) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.554542 91.905873) (end 37.524757 91.858471) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.075242 91.858471) (end 38.045457 91.905873) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.445457 91.594128) (end 37.405872 91.554543) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.524757 91.858471) (end 37.506268 91.805631) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.493731 91.69437) (end 37.475242 91.64153) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.475242 91.64153) (end 37.445457 91.594128) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.729709 91.330165) (end 38.707521 91.266756) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.405872 91.554543) (end 37.35847 91.524758) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.30563 91.506269) (end 37.25 91.5) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.25 91.5) (end 35.89 91.5) (width 0.3) (layer F.Cu) (net 17))
(segment (start 30.9125 75.2) (end 31.2125 75.5) (width 0.3) (layer F.Cu) (net 18) (status 30))
(segment (start 28 75.2) (end 30.9125 75.2) (width 0.3) (layer F.Cu) (net 18) (status 30))
(via (at 26.13 75.26) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 18))
(segment (start 27.94 75.26) (end 28 75.2) (width 0.3) (layer F.Cu) (net 18) (status 30))
(segment (start 26.13 75.26) (end 27.94 75.26) (width 0.3) (layer F.Cu) (net 18) (status 20))
(via (at 33.5 86.99) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 18))
(segment (start 40.825 89.5) (end 36.01 89.5) (width 0.3) (layer F.Cu) (net 18) (status 10))
(segment (start 33.749999 87.239999) (end 33.5 86.99) (width 0.3) (layer F.Cu) (net 18))
(segment (start 36.01 89.5) (end 33.749999 87.239999) (width 0.3) (layer F.Cu) (net 18))
(segment (start 23.899999 76.600001) (end 23.899999 75.600001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.892477 76.666757) (end 23.899999 76.600001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.834548 76.787047) (end 23.870289 76.730166) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.730164 76.870291) (end 23.787045 76.83455) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.666755 76.892479) (end 23.730164 76.870291) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.012952 76.965451) (end 23.069833 76.92971) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.965449 77.012954) (end 23.012952 76.965451) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.929708 77.069835) (end 22.965449 77.012954) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.90752 77.133244) (end 22.929708 77.069835) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.929708 77.330166) (end 22.90752 77.266757) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.069833 77.470291) (end 23.012952 77.43455) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.787045 76.83455) (end 23.834548 76.787047) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.133242 77.492479) (end 23.069833 77.470291) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.199999 77.500001) (end 23.133242 77.492479) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.149999 77.500001) (end 23.199999 77.500001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.20563 77.506269) (end 24.149999 77.500001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.25847 77.524758) (end 24.20563 77.506269) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.375242 77.64153) (end 24.345457 77.594128) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.399999 77.850001) (end 24.399999 77.750001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.375242 77.958471) (end 24.393731 77.905631) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.345457 78.005873) (end 24.375242 77.958471) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.25847 78.075243) (end 24.305872 78.045458) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.012952 77.43455) (end 22.965449 77.387047) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.20563 78.093732) (end 24.25847 78.075243) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.149999 78.100001) (end 24.20563 78.093732) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.199999 78.100001) (end 24.149999 78.100001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.069833 78.12971) (end 23.133242 78.107522) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.012952 78.165451) (end 23.069833 78.12971) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.965449 78.212954) (end 23.012952 78.165451) (width 0.3) (layer B.Cu) (net 18))
(segment (start 30.71 86.99) (end 29.99 86.99) (width 0.3) (layer B.Cu) (net 18))
(segment (start 30.840165 87.01971) (end 30.776756 86.997522) (width 0.3) (layer B.Cu) (net 18))
(segment (start 32.202478 86.223243) (end 32.18029 86.159834) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.393731 77.905631) (end 24.399999 77.850001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 32.239709 86.820165) (end 32.217521 86.756756) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.002478 87.223244) (end 30.98029 87.159835) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.122953 87.92455) (end 31.07545 87.877047) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.133242 78.107522) (end 23.199999 78.100001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 30.897046 87.055451) (end 30.840165 87.01971) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.243243 87.982479) (end 31.179834 87.960291) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.01 87.69) (end 31.01 87.29) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.133242 79.307522) (end 23.199999 79.300001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.440165 87.960291) (end 31.376756 87.982479) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.544549 87.877047) (end 31.497046 87.92455) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.199999 78.700001) (end 23.133242 78.692479) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.017521 87.756757) (end 31.01 87.69) (width 0.3) (layer B.Cu) (net 18))
(segment (start 32.21 86.29) (end 32.202478 86.223243) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.345457 77.594128) (end 24.305872 77.554543) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.07545 87.877047) (end 31.039709 87.820166) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.602478 87.756757) (end 31.58029 87.820166) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.834549 79.187047) (end 24.87029 79.130166) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.965449 77.387047) (end 22.929708 77.330166) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.133242 78.692479) (end 23.069833 78.670291) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.497046 87.92455) (end 31.440165 87.960291) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.133242 76.907522) (end 23.199999 76.900001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.393731 77.69437) (end 24.375242 77.64153) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.61 86.29) (end 31.61 87.69) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.639709 86.159834) (end 31.617521 86.223243) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.779834 86.019709) (end 31.722953 86.05545) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.01 87.29) (end 31.002478 87.223244) (width 0.3) (layer B.Cu) (net 18))
(segment (start 32.322953 86.924549) (end 32.27545 86.877046) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.61 87.69) (end 31.602478 87.756757) (width 0.3) (layer B.Cu) (net 18))
(segment (start 32.21 86.69) (end 32.21 86.29) (width 0.3) (layer B.Cu) (net 18))
(segment (start 32.379834 86.96029) (end 32.322953 86.924549) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.31 87.99) (end 31.243243 87.982479) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.399999 77.750001) (end 24.393731 77.69437) (width 0.3) (layer B.Cu) (net 18))
(segment (start 32.27545 86.877046) (end 32.239709 86.820165) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.730165 78.72971) (end 24.666756 78.707522) (width 0.3) (layer B.Cu) (net 18))
(segment (start 32.144549 86.102953) (end 32.097046 86.05545) (width 0.3) (layer B.Cu) (net 18))
(segment (start 33.5 86.99) (end 32.51 86.99) (width 0.3) (layer B.Cu) (net 18))
(segment (start 32.097046 86.05545) (end 32.040165 86.019709) (width 0.3) (layer B.Cu) (net 18))
(segment (start 30.776756 86.997522) (end 30.71 86.99) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.87029 79.130166) (end 24.892478 79.066757) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.133242 79.892479) (end 23.069833 79.870291) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.305872 78.045458) (end 24.345457 78.005873) (width 0.3) (layer B.Cu) (net 18))
(segment (start 30.944549 87.102954) (end 30.897046 87.055451) (width 0.3) (layer B.Cu) (net 18))
(segment (start 32.443243 86.982478) (end 32.379834 86.96029) (width 0.3) (layer B.Cu) (net 18))
(segment (start 29.99 86.99) (end 23.899999 80.899999) (width 0.3) (layer B.Cu) (net 18))
(segment (start 32.217521 86.756756) (end 32.21 86.69) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.899999 75.600001) (end 24.5 75) (width 0.3) (layer B.Cu) (net 18))
(segment (start 32.51 86.99) (end 32.443243 86.982478) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.012952 79.83455) (end 22.965449 79.787047) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.5 75) (end 25.87 75) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.67545 86.102953) (end 31.639709 86.159834) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.722953 86.05545) (end 31.67545 86.102953) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.599999 76.900001) (end 23.666755 76.892479) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.599999 78.700001) (end 23.199999 78.700001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.843243 85.997521) (end 31.779834 86.019709) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.179834 87.960291) (end 31.122953 87.92455) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.91 85.99) (end 31.843243 85.997521) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.617521 86.223243) (end 31.61 86.29) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.870289 80.069835) (end 23.834548 80.012954) (width 0.3) (layer B.Cu) (net 18))
(segment (start 30.98029 87.159835) (end 30.944549 87.102954) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.834548 80.012954) (end 23.787045 79.965451) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.069833 76.92971) (end 23.133242 76.907522) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.730164 79.92971) (end 23.666755 79.907522) (width 0.3) (layer B.Cu) (net 18))
(segment (start 32.18029 86.159834) (end 32.144549 86.102953) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.787046 78.765451) (end 24.730165 78.72971) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.899999 80.899999) (end 23.899999 80.200001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.899999 80.200001) (end 23.892477 80.133244) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.892477 80.133244) (end 23.870289 80.069835) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.899999 79.600001) (end 22.90752 79.533244) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.90752 79.533244) (end 22.929708 79.469835) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.976756 85.997521) (end 31.91 85.99) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.666755 79.907522) (end 23.599999 79.900001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.787045 79.965451) (end 23.730164 79.92971) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.199999 79.900001) (end 23.133242 79.892479) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.376756 87.982479) (end 31.31 87.99) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.965449 79.412954) (end 23.012952 79.365451) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.870289 76.730166) (end 23.892477 76.666757) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.069833 79.870291) (end 23.012952 79.83455) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.965449 79.787047) (end 22.929708 79.730166) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.58029 87.820166) (end 31.544549 87.877047) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.929708 79.730166) (end 22.90752 79.666757) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.90752 79.666757) (end 22.899999 79.600001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 32.040165 86.019709) (end 31.976756 85.997521) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.929708 79.469835) (end 22.965449 79.412954) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.90752 77.266757) (end 22.899999 77.200001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.305872 77.554543) (end 24.25847 77.524758) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.039709 87.820166) (end 31.017521 87.756757) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.012952 79.365451) (end 23.069833 79.32971) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.069833 79.32971) (end 23.133242 79.307522) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.199999 79.300001) (end 24.599999 79.300001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.599999 79.300001) (end 24.666756 79.292479) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.730165 79.270291) (end 24.787046 79.23455) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.199999 76.900001) (end 23.599999 76.900001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.666756 79.292479) (end 24.730165 79.270291) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.90752 78.466757) (end 22.899999 78.400001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.787046 79.23455) (end 24.834549 79.187047) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.90752 78.333244) (end 22.929708 78.269835) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.892478 79.066757) (end 24.899999 79.000001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.899999 77.200001) (end 22.90752 77.133244) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.899999 79.000001) (end 24.892478 78.933244) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.892478 78.933244) (end 24.87029 78.869835) (width 0.3) (layer B.Cu) (net 18))
(segment (start 25.87 75) (end 26.13 75.26) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.87029 78.869835) (end 24.834549 78.812954) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.834549 78.812954) (end 24.787046 78.765451) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.666756 78.707522) (end 24.599999 78.700001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.599999 79.900001) (end 23.199999 79.900001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.069833 78.670291) (end 23.012952 78.63455) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.012952 78.63455) (end 22.965449 78.587047) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.965449 78.587047) (end 22.929708 78.530166) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.929708 78.530166) (end 22.90752 78.466757) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.899999 78.400001) (end 22.90752 78.333244) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.929708 78.269835) (end 22.965449 78.212954) (width 0.3) (layer B.Cu) (net 18))
(segment (start 28 76.3) (end 29.55 76.3) (width 0.3) (layer F.Cu) (net 19) (status 10))
(segment (start 30.25 77) (end 31.2125 77) (width 0.3) (layer F.Cu) (net 19) (status 20))
(segment (start 29.55 76.3) (end 30.25 77) (width 0.3) (layer F.Cu) (net 19))
(via (at 34.06 84.38) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 19))
(segment (start 34.06 84.38) (end 33.250001 83.570001) (width 0.3) (layer B.Cu) (net 19))
(via (at 33.5 79) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 19))
(segment (start 33.250001 79.249999) (end 33.5 79) (width 0.3) (layer B.Cu) (net 19))
(segment (start 33.250001 83.570001) (end 33.250001 79.249999) (width 0.3) (layer B.Cu) (net 19))
(segment (start 38.326447 89) (end 34.06 84.733553) (width 0.3) (layer F.Cu) (net 19))
(segment (start 40.825 89) (end 38.326447 89) (width 0.3) (layer F.Cu) (net 19) (status 10))
(segment (start 34.06 84.733553) (end 34.06 84.38) (width 0.3) (layer F.Cu) (net 19))
(segment (start 29.55 77.175) (end 31.375 79) (width 0.3) (layer F.Cu) (net 19))
(segment (start 29.55 76.3) (end 29.55 77.175) (width 0.3) (layer F.Cu) (net 19))
(segment (start 31.375 79) (end 33.5 79) (width 0.3) (layer F.Cu) (net 19))
(segment (start 24.2125 50) (end 24.2125 52) (width 0.3) (layer F.Cu) (net 20) (status 20))
(segment (start 24.2125 49.5) (end 24.2125 50) (width 0.3) (layer F.Cu) (net 20) (status 10))
(segment (start 58.9625 105) (end 58.9625 106.5) (width 0.3) (layer F.Cu) (net 21))
(segment (start 55.925 101.675) (end 54.5 101.675) (width 0.3) (layer F.Cu) (net 21))
(segment (start 58.7125 104.75) (end 58.25 104.75) (width 0.3) (layer F.Cu) (net 21))
(segment (start 57 102.75) (end 55.925 101.675) (width 0.3) (layer F.Cu) (net 21))
(segment (start 58.9625 105) (end 58.7125 104.75) (width 0.3) (layer F.Cu) (net 21))
(segment (start 58.25 104.75) (end 57 103.5) (width 0.3) (layer F.Cu) (net 21))
(segment (start 57 103.5) (end 57 102.75) (width 0.3) (layer F.Cu) (net 21))
(segment (start 58.9625 108) (end 58.9625 106.5) (width 0.3) (layer F.Cu) (net 21))
(segment (start 88.5 61.75) (end 91 64.25) (width 1) (layer F.Cu) (net 22) (status 20))
(segment (start 88.5 48.5) (end 88.5 61.75) (width 1) (layer F.Cu) (net 22))
(segment (start 80 45.5) (end 85.5 45.5) (width 1) (layer F.Cu) (net 22) (status 10))
(segment (start 85.5 45.5) (end 88.5 48.5) (width 1) (layer F.Cu) (net 22))
(segment (start 89.5 40.25) (end 91 41.75) (width 1) (layer F.Cu) (net 23) (status 20))
(segment (start 91 35) (end 89.5 36.5) (width 1) (layer F.Cu) (net 23) (status 10))
(segment (start 89.5 36.5) (end 89.5 40.25) (width 1) (layer F.Cu) (net 23))
(segment (start 80.5 25) (end 80 25.5) (width 1) (layer F.Cu) (net 24) (status 30))
(segment (start 91 25) (end 80.5 25) (width 1) (layer F.Cu) (net 24) (status 30))
(segment (start 35.5 107.5) (end 36.5 106.5) (width 0.3) (layer F.Cu) (net 25))
(segment (start 22.12 92.88) (end 19 96) (width 0.3) (layer F.Cu) (net 25))
(segment (start 23.96 92.88) (end 22.12 92.88) (width 0.3) (layer F.Cu) (net 25) (status 10))
(segment (start 19 96) (end 19 106.66) (width 0.3) (layer F.Cu) (net 25))
(segment (start 19.84 107.5) (end 35.5 107.5) (width 0.3) (layer F.Cu) (net 25))
(segment (start 37.75 96.5) (end 40.825 96.5) (width 0.3) (layer F.Cu) (net 25) (status 20))
(segment (start 36.5 97.75) (end 37.75 96.5) (width 0.3) (layer F.Cu) (net 25))
(segment (start 36.5 106.5) (end 36.5 97.75) (width 0.3) (layer F.Cu) (net 25))
(segment (start 19 106.66) (end 19.84 107.5) (width 0.3) (layer F.Cu) (net 25))
(segment (start 19.65 93.3) (end 21.85 93.3) (width 0.25) (layer B.Cu) (net 25) (status 30))
(segment (start 23.54 93.3) (end 23.96 92.88) (width 0.25) (layer B.Cu) (net 25) (status 30))
(segment (start 21.85 93.3) (end 23.54 93.3) (width 0.25) (layer B.Cu) (net 25) (status 30))
(segment (start 20 97.5) (end 22.08 95.42) (width 0.3) (layer F.Cu) (net 26))
(segment (start 22.08 95.42) (end 23.96 95.42) (width 0.3) (layer F.Cu) (net 26) (status 20))
(segment (start 20.89 106.5) (end 20 105.61) (width 0.3) (layer F.Cu) (net 26))
(segment (start 40.825 96) (end 37.25 96) (width 0.3) (layer F.Cu) (net 26) (status 10))
(segment (start 37.25 96) (end 35.5 97.75) (width 0.3) (layer F.Cu) (net 26))
(segment (start 35.5 97.75) (end 35.5 105.16) (width 0.3) (layer F.Cu) (net 26))
(segment (start 20 105.61) (end 20 97.5) (width 0.3) (layer F.Cu) (net 26))
(segment (start 35.5 105.16) (end 34.16 106.5) (width 0.3) (layer F.Cu) (net 26))
(segment (start 34.16 106.5) (end 20.89 106.5) (width 0.3) (layer F.Cu) (net 26))
(segment (start 19.65 95.2) (end 21.85 95.2) (width 0.25) (layer B.Cu) (net 26) (status 30))
(segment (start 23.74 95.2) (end 23.96 95.42) (width 0.25) (layer B.Cu) (net 26) (status 30))
(segment (start 21.85 95.2) (end 23.74 95.2) (width 0.25) (layer B.Cu) (net 26) (status 30))
(segment (start 36.75 95.5) (end 40.825 95.5) (width 0.3) (layer F.Cu) (net 27) (status 20))
(segment (start 35 97.25) (end 36.75 95.5) (width 0.3) (layer F.Cu) (net 27))
(segment (start 22.87 97.96) (end 21.5 99.33) (width 0.3) (layer F.Cu) (net 27))
(segment (start 35 103.99) (end 35 97.25) (width 0.3) (layer F.Cu) (net 27))
(segment (start 21.5 99.33) (end 21.5 105) (width 0.3) (layer F.Cu) (net 27))
(segment (start 22.07 105.57) (end 33.42 105.57) (width 0.3) (layer F.Cu) (net 27))
(segment (start 23.96 97.96) (end 22.87 97.96) (width 0.3) (layer F.Cu) (net 27) (status 10))
(segment (start 33.42 105.57) (end 35 103.99) (width 0.3) (layer F.Cu) (net 27))
(segment (start 21.5 105) (end 22.07 105.57) (width 0.3) (layer F.Cu) (net 27))
(segment (start 19.65 98.3) (end 21.85 98.3) (width 0.25) (layer B.Cu) (net 27) (status 30))
(segment (start 23.62 98.3) (end 23.96 97.96) (width 0.25) (layer B.Cu) (net 27) (status 30))
(segment (start 21.85 98.3) (end 23.62 98.3) (width 0.25) (layer B.Cu) (net 27) (status 30))
(segment (start 23.88 101.88) (end 23.88 100.58) (width 0.3) (layer F.Cu) (net 28) (status 20))
(segment (start 23.88 100.58) (end 23.96 100.5) (width 0.3) (layer F.Cu) (net 28) (status 30))
(segment (start 35.985 95) (end 34 96.985) (width 0.3) (layer F.Cu) (net 28))
(segment (start 40.825 95) (end 35.985 95) (width 0.3) (layer F.Cu) (net 28) (status 10))
(segment (start 26.5 104.5) (end 23.88 101.88) (width 0.3) (layer F.Cu) (net 28))
(segment (start 34 96.985) (end 34 103.5) (width 0.3) (layer F.Cu) (net 28))
(segment (start 34 103.5) (end 33 104.5) (width 0.3) (layer F.Cu) (net 28))
(segment (start 33 104.5) (end 26.5 104.5) (width 0.3) (layer F.Cu) (net 28))
(segment (start 19.65 100.2) (end 21.85 100.2) (width 0.25) (layer B.Cu) (net 28) (status 30))
(segment (start 23.66 100.2) (end 23.96 100.5) (width 0.25) (layer B.Cu) (net 28) (status 30))
(segment (start 21.85 100.2) (end 23.66 100.2) (width 0.25) (layer B.Cu) (net 28) (status 30))
(segment (start 38.725 78) (end 38.2875 78) (width 0.3) (layer F.Cu) (net 29) (status 20))
(segment (start 38.73 77.995) (end 38.725 78) (width 0.3) (layer F.Cu) (net 29))
(via (at 39.11 76.51) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 29))
(segment (start 38.73 76.52) (end 38.74 76.51) (width 0.3) (layer F.Cu) (net 29))
(segment (start 38.73 73.135) (end 38.73 76.52) (width 0.3) (layer F.Cu) (net 29) (status 10))
(segment (start 38.74 76.51) (end 39.11 76.51) (width 0.3) (layer F.Cu) (net 29))
(segment (start 38.73 76.52) (end 38.73 77.995) (width 0.3) (layer F.Cu) (net 29))
(via (at 40.5 76.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 29))
(segment (start 39.11 76.51) (end 40.49 76.51) (width 0.3) (layer B.Cu) (net 29))
(segment (start 44 86.325) (end 44 85) (width 0.3) (layer F.Cu) (net 29) (status 10))
(segment (start 40.49 76.51) (end 40.5 76.5) (width 0.3) (layer B.Cu) (net 29))
(segment (start 44.28751 84.71249) (end 44.28751 80.28751) (width 0.3) (layer F.Cu) (net 29))
(segment (start 44.28751 80.28751) (end 40.749999 76.749999) (width 0.3) (layer F.Cu) (net 29))
(segment (start 40.749999 76.749999) (end 40.5 76.5) (width 0.3) (layer F.Cu) (net 29))
(segment (start 44 85) (end 44.28751 84.71249) (width 0.3) (layer F.Cu) (net 29))
(segment (start 38.2875 80) (end 38.725 80) (width 0.3) (layer F.Cu) (net 30) (status 10))
(segment (start 38.725 80) (end 39.73 78.995) (width 0.3) (layer F.Cu) (net 30))
(via (at 39.73 78.995) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 30))
(segment (start 44.386447 88.54) (end 44.74 88.54) (width 0.3) (layer F.Cu) (net 30))
(segment (start 39.73 78.995) (end 45.609999 84.874999) (width 0.3) (layer B.Cu) (net 30))
(segment (start 45.609999 88.023554) (end 45.093553 88.54) (width 0.3) (layer B.Cu) (net 30))
(segment (start 45.609999 84.874999) (end 45.609999 88.023554) (width 0.3) (layer B.Cu) (net 30))
(segment (start 45.093553 88.54) (end 44.74 88.54) (width 0.3) (layer B.Cu) (net 30))
(segment (start 40.825 88) (end 42 88) (width 0.3) (layer F.Cu) (net 30) (status 10))
(segment (start 42.54 88.54) (end 44.386447 88.54) (width 0.3) (layer F.Cu) (net 30))
(segment (start 42 88) (end 42.54 88.54) (width 0.3) (layer F.Cu) (net 30))
(via (at 44.74 88.54) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 30))
(segment (start 40.25 74.155) (end 41.27 73.135) (width 0.3) (layer F.Cu) (net 30))
(segment (start 40.25 75.75) (end 40.25 74.155) (width 0.3) (layer F.Cu) (net 30))
(segment (start 39.73 78.995) (end 39.73 76.27) (width 0.3) (layer F.Cu) (net 30))
(segment (start 39.73 76.27) (end 40.25 75.75) (width 0.3) (layer F.Cu) (net 30))
(segment (start 46 68.35) (end 44.33 66.68) (width 0.3) (layer F.Cu) (net 31))
(segment (start 46 86.325) (end 46 68.35) (width 0.3) (layer F.Cu) (net 31) (status 10))
(segment (start 44.33 66.68) (end 41.8 66.68) (width 0.3) (layer F.Cu) (net 31))
(segment (start 39.88 70.475) (end 41.27 71.865) (width 0.3) (layer F.Cu) (net 31) (status 20))
(segment (start 39.88 68.6) (end 39.88 70.475) (width 0.3) (layer F.Cu) (net 31))
(segment (start 41.8 66.68) (end 39.88 68.6) (width 0.3) (layer F.Cu) (net 31))
(via (at 43.47 67.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 32))
(segment (start 45.5 86.325) (end 45.5 69.53) (width 0.3) (layer F.Cu) (net 32) (status 10))
(segment (start 45.5 69.53) (end 43.47 67.5) (width 0.3) (layer F.Cu) (net 32))
(via (at 39.73 66.56) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 32))
(segment (start 38.73 67.56) (end 39.73 66.56) (width 0.3) (layer F.Cu) (net 32))
(segment (start 38.73 71.865) (end 38.73 67.56) (width 0.3) (layer F.Cu) (net 32) (status 10))
(segment (start 40.67 67.5) (end 39.73 66.56) (width 0.25) (layer B.Cu) (net 32))
(segment (start 43.47 67.5) (end 40.67 67.5) (width 0.25) (layer B.Cu) (net 32))
(via (at 47.25 97.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 33))
(via (at 37.73 70.94) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 33))
(segment (start 38.5 70) (end 38.025 70) (width 0.3) (layer B.Cu) (net 33) (status 30))
(segment (start 37.46 71.21) (end 37.480001 71.189999) (width 0.3) (layer F.Cu) (net 33))
(segment (start 37.480001 71.189999) (end 37.73 70.94) (width 0.3) (layer F.Cu) (net 33))
(segment (start 37.73 70.586447) (end 37.73 70.94) (width 0.3) (layer B.Cu) (net 33))
(segment (start 37.46 71.865) (end 37.46 71.21) (width 0.3) (layer F.Cu) (net 33) (status 10))
(segment (start 38.025 70) (end 37.73 70.295) (width 0.3) (layer B.Cu) (net 33) (status 10))
(segment (start 37.73 70.295) (end 37.73 70.586447) (width 0.3) (layer B.Cu) (net 33))
(via (at 45.28 94.64) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 33))
(segment (start 45.28 95.28) (end 45.28 94.64) (width 0.3) (layer F.Cu) (net 33))
(segment (start 47.25 97.25) (end 45.28 95.28) (width 0.3) (layer F.Cu) (net 33))
(segment (start 45.28 94.286447) (end 45.28 94.64) (width 0.3) (layer B.Cu) (net 33))
(segment (start 45.28 92.56) (end 45.28 94.286447) (width 0.3) (layer B.Cu) (net 33))
(segment (start 37.73 70.94) (end 37.73 85.01) (width 0.3) (layer B.Cu) (net 33))
(segment (start 37.73 85.01) (end 45.28 92.56) (width 0.3) (layer B.Cu) (net 33))
(via (at 48.82 99.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 33))
(segment (start 49 101.675) (end 49 99.93) (width 0.3) (layer F.Cu) (net 33) (status 10))
(segment (start 48.82 98.82) (end 48.82 99.75) (width 0.3) (layer B.Cu) (net 33))
(segment (start 49 99.93) (end 48.82 99.75) (width 0.3) (layer F.Cu) (net 33))
(segment (start 47.25 97.25) (end 48.82 98.82) (width 0.3) (layer B.Cu) (net 33))
(segment (start 67 74.5) (end 66.5 74) (width 0.3) (layer F.Cu) (net 34) (status 30))
(segment (start 67 77.5) (end 67 74.5) (width 0.3) (layer F.Cu) (net 34) (status 30))
(segment (start 20.96 61.54) (end 47.2 61.54) (width 0.3) (layer B.Cu) (net 35) (status 10))
(segment (start 47.2 61.54) (end 49.55 59.19) (width 0.3) (layer B.Cu) (net 35))
(segment (start 55.61 59.19) (end 57.42 61) (width 0.3) (layer B.Cu) (net 35) (status 20))
(segment (start 49.55 59.19) (end 55.61 59.19) (width 0.3) (layer B.Cu) (net 35))
(segment (start 57.42 61) (end 57.42 55.0875) (width 0.3) (layer F.Cu) (net 35) (status 30))
(segment (start 57.42 55.0875) (end 57.37 55.0375) (width 0.3) (layer F.Cu) (net 35) (status 30))
(segment (start 57.12 66.38) (end 59.96 63.54) (width 0.3) (layer F.Cu) (net 36) (status 20))
(segment (start 57.12 76.21) (end 57.12 66.38) (width 0.3) (layer F.Cu) (net 36))
(segment (start 52.85 78.675) (end 54.655 78.675) (width 0.3) (layer F.Cu) (net 36) (status 10))
(segment (start 54.655 78.675) (end 57.12 76.21) (width 0.3) (layer F.Cu) (net 36))
(segment (start 56.11 64.85) (end 57.42 63.54) (width 0.3) (layer F.Cu) (net 37) (status 20))
(segment (start 56.11 75.2) (end 56.11 64.85) (width 0.3) (layer F.Cu) (net 37))
(segment (start 52.85 76.135) (end 55.175 76.135) (width 0.3) (layer F.Cu) (net 37) (status 10))
(segment (start 55.175 76.135) (end 56.11 75.2) (width 0.3) (layer F.Cu) (net 37))
(segment (start 54.88 61) (end 56.13 62.25) (width 0.3) (layer B.Cu) (net 38))
(segment (start 58.249999 67.769999) (end 58 67.52) (width 0.3) (layer F.Cu) (net 38))
(segment (start 59.505 76.135) (end 58.9 75.53) (width 0.3) (layer F.Cu) (net 38))
(segment (start 57.750001 67.270001) (end 58 67.52) (width 0.3) (layer B.Cu) (net 38))
(segment (start 58.9 75.53) (end 58.9 68.42) (width 0.3) (layer F.Cu) (net 38))
(segment (start 58.9 68.42) (end 58.249999 67.769999) (width 0.3) (layer F.Cu) (net 38))
(segment (start 56.13 65.65) (end 57.750001 67.270001) (width 0.3) (layer B.Cu) (net 38))
(segment (start 62.15 76.135) (end 59.505 76.135) (width 0.3) (layer F.Cu) (net 38))
(via (at 58 67.52) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 38))
(segment (start 56.13 62.25) (end 56.13 65.65) (width 0.3) (layer B.Cu) (net 38))
(segment (start 55.28 63.94) (end 54.88 63.54) (width 0.3) (layer F.Cu) (net 39) (status 30))
(segment (start 55.28 73.51) (end 55.28 63.94) (width 0.3) (layer F.Cu) (net 39) (status 20))
(segment (start 52.85 73.595) (end 55.195 73.595) (width 0.3) (layer F.Cu) (net 39) (status 10))
(segment (start 55.195 73.595) (end 55.28 73.51) (width 0.3) (layer F.Cu) (net 39))
(segment (start 58 69.853553) (end 58 69.5) (width 0.3) (layer F.Cu) (net 40))
(via (at 58 69.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 40))
(segment (start 53.56 62.22) (end 53.56 65.06) (width 0.3) (layer B.Cu) (net 40))
(segment (start 52.34 61) (end 53.56 62.22) (width 0.3) (layer B.Cu) (net 40))
(segment (start 57.750001 69.250001) (end 58 69.5) (width 0.3) (layer B.Cu) (net 40))
(segment (start 53.56 65.06) (end 57.750001 69.250001) (width 0.3) (layer B.Cu) (net 40))
(segment (start 62.15 78.675) (end 59.315 78.675) (width 0.3) (layer F.Cu) (net 40))
(segment (start 59.315 78.675) (end 58 77.36) (width 0.3) (layer F.Cu) (net 40))
(segment (start 58 77.36) (end 58 69.853553) (width 0.3) (layer F.Cu) (net 40))
(segment (start 54.405 71.055) (end 52.85 71.055) (width 0.3) (layer F.Cu) (net 41) (status 20))
(segment (start 54.53 70.93) (end 54.405 71.055) (width 0.3) (layer F.Cu) (net 41))
(segment (start 52.34 63.54) (end 52.34 65.63) (width 0.3) (layer F.Cu) (net 41) (status 10))
(segment (start 54.53 67.82) (end 54.53 70.93) (width 0.3) (layer F.Cu) (net 41))
(segment (start 52.34 65.63) (end 54.53 67.82) (width 0.3) (layer F.Cu) (net 41))
(via (at 58.5 91.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 42))
(segment (start 56.175 89.5) (end 57.75 89.5) (width 0.25) (layer F.Cu) (net 42) (status 10))
(segment (start 57.75 89.5) (end 58 89.75) (width 0.25) (layer F.Cu) (net 42))
(segment (start 58 90.75) (end 58.5 91.25) (width 0.25) (layer F.Cu) (net 42))
(segment (start 58 89.75) (end 58 90.75) (width 0.25) (layer F.Cu) (net 42))
(segment (start 60.98 93.73) (end 64.25 93.73) (width 0.3) (layer B.Cu) (net 42) (status 20))
(segment (start 58.5 91.25) (end 60.98 93.73) (width 0.3) (layer B.Cu) (net 42))
(segment (start 54.75 89.5) (end 56.175 89.5) (width 0.25) (layer F.Cu) (net 42) (status 20))
(segment (start 54.5 89.25) (end 54.75 89.5) (width 0.25) (layer F.Cu) (net 42))
(segment (start 56.175 89) (end 54.75 89) (width 0.25) (layer F.Cu) (net 42) (status 10))
(segment (start 54.75 89) (end 54.5 89.25) (width 0.25) (layer F.Cu) (net 42))
(segment (start 64.25 93.73) (end 64.3075 93.7875) (width 0.3) (layer B.Cu) (net 42) (status 30))
(segment (start 66.4425 93.73) (end 66.5 93.7875) (width 0.3) (layer B.Cu) (net 42))
(segment (start 64.25 93.73) (end 66.4425 93.73) (width 0.3) (layer B.Cu) (net 42))
(segment (start 84.7125 98) (end 84.7125 96) (width 0.3) (layer B.Cu) (net 43) (status 30))
(via (at 61.04 94.34) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 43))
(segment (start 58.533624 95.5) (end 59.313646 94.719978) (width 0.3) (layer F.Cu) (net 43))
(segment (start 60.790001 94.589999) (end 61.04 94.34) (width 0.3) (layer F.Cu) (net 43))
(segment (start 56.175 95.5) (end 58.533624 95.5) (width 0.3) (layer F.Cu) (net 43) (status 10))
(segment (start 60.660022 94.719978) (end 60.790001 94.589999) (width 0.3) (layer F.Cu) (net 43))
(segment (start 59.313646 94.719978) (end 60.660022 94.719978) (width 0.3) (layer F.Cu) (net 43))
(segment (start 61.393553 94.34) (end 61.04 94.34) (width 0.3) (layer B.Cu) (net 43))
(segment (start 61.575 94.34) (end 61.393553 94.34) (width 0.3) (layer B.Cu) (net 43))
(segment (start 63.5 96.265) (end 61.575 94.34) (width 0.3) (layer B.Cu) (net 43))
(segment (start 63.5 107.6833) (end 63.5 96.265) (width 0.3) (layer B.Cu) (net 43))
(segment (start 65.0667 109.25) (end 63.5 107.6833) (width 0.3) (layer B.Cu) (net 43))
(segment (start 84.7125 104.0507) (end 84.7169 104.0551) (width 0.3) (layer B.Cu) (net 43))
(segment (start 84.7125 98) (end 84.7125 104.0507) (width 0.3) (layer B.Cu) (net 43))
(segment (start 84.7169 104.0551) (end 84.7169 108.3897) (width 0.3) (layer B.Cu) (net 43))
(segment (start 84.7169 108.3897) (end 83.8566 109.25) (width 0.3) (layer B.Cu) (net 43))
(segment (start 83.8566 109.25) (end 65.0667 109.25) (width 0.3) (layer B.Cu) (net 43))
(via (at 27 86) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 44))
(via (at 27.5 56) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 44))
(segment (start 27.5 56) (end 25.7875 56) (width 0.3) (layer F.Cu) (net 44) (status 20))
(segment (start 21 80) (end 21 65.881996) (width 0.3) (layer B.Cu) (net 44))
(segment (start 21 65.881996) (end 19.37 64.251996) (width 0.3) (layer B.Cu) (net 44))
(segment (start 24.4 56) (end 27.5 56) (width 0.3) (layer B.Cu) (net 44))
(segment (start 27 86) (end 21 80) (width 0.3) (layer B.Cu) (net 44))
(segment (start 19.37 64.251996) (end 19.37 61.03) (width 0.3) (layer B.Cu) (net 44))
(segment (start 19.37 61.03) (end 24.4 56) (width 0.3) (layer B.Cu) (net 44))
(segment (start 29.75 88.75) (end 27 86) (width 0.3) (layer F.Cu) (net 44))
(segment (start 35.280001 94.5) (end 35 94.219999) (width 0.3) (layer F.Cu) (net 44))
(segment (start 40.825 94.5) (end 35.280001 94.5) (width 0.3) (layer F.Cu) (net 44) (status 10))
(segment (start 35 94.219999) (end 31.219999 94.219999) (width 0.3) (layer F.Cu) (net 44))
(segment (start 31.219999 94.219999) (end 29.75 92.75) (width 0.3) (layer F.Cu) (net 44))
(segment (start 29.75 92.75) (end 29.75 88.75) (width 0.3) (layer F.Cu) (net 44))
(via (at 47.88 63.54) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 45))
(via (at 27 52) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 45))
(segment (start 27 52) (end 25.7875 52) (width 0.3) (layer F.Cu) (net 45) (status 20))
(segment (start 56.103553 82.75) (end 55.75 82.75) (width 0.3) (layer F.Cu) (net 45))
(segment (start 60.86 91.27) (end 60.86 86.256447) (width 0.3) (layer F.Cu) (net 45))
(segment (start 60.86 86.256447) (end 57.353553 82.75) (width 0.3) (layer F.Cu) (net 45))
(segment (start 57.353553 82.75) (end 56.103553 82.75) (width 0.3) (layer F.Cu) (net 45))
(segment (start 47.88 74.88) (end 55.500001 82.500001) (width 0.3) (layer B.Cu) (net 45))
(segment (start 57.63 94.5) (end 60.86 91.27) (width 0.3) (layer F.Cu) (net 45))
(via (at 55.75 82.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 45))
(segment (start 56.175 94.5) (end 57.63 94.5) (width 0.3) (layer F.Cu) (net 45))
(segment (start 47.88 63.54) (end 47.88 74.88) (width 0.3) (layer B.Cu) (net 45))
(segment (start 55.500001 82.500001) (end 55.75 82.75) (width 0.3) (layer B.Cu) (net 45))
(segment (start 27 52) (end 46.5 52) (width 0.3) (layer B.Cu) (net 45))
(segment (start 46.5 52) (end 46.500026 52.000026) (width 0.3) (layer B.Cu) (net 45))
(segment (start 46.500026 62.160026) (end 46.500026 52.353579) (width 0.3) (layer F.Cu) (net 45))
(segment (start 47.88 63.54) (end 46.500026 62.160026) (width 0.3) (layer F.Cu) (net 45))
(via (at 46.500026 52.000026) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 45))
(segment (start 46.500026 52.353579) (end 46.500026 52.000026) (width 0.3) (layer F.Cu) (net 45))
(segment (start 56.175 95) (end 58.08 95) (width 0.3) (layer F.Cu) (net 46) (status 10))
(segment (start 58.08 95) (end 61.56 91.52) (width 0.3) (layer F.Cu) (net 46))
(segment (start 61.56 87.2275) (end 66 82.7875) (width 0.3) (layer F.Cu) (net 46) (status 20))
(segment (start 61.56 91.52) (end 61.56 87.2275) (width 0.3) (layer F.Cu) (net 46))
(segment (start 59.975 101.2375) (end 60.2125 101) (width 0.3) (layer F.Cu) (net 47) (status 30))
(segment (start 59.975 103) (end 59.975 101.2375) (width 0.3) (layer F.Cu) (net 47) (status 30))
(via (at 56.25 105) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 47))
(segment (start 54.81 105) (end 56.25 105) (width 0.3) (layer F.Cu) (net 47))
(segment (start 53 101.675) (end 53 103.19) (width 0.3) (layer F.Cu) (net 47) (status 10))
(segment (start 53 103.19) (end 54.81 105) (width 0.3) (layer F.Cu) (net 47))
(via (at 58 103.19) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 47))
(segment (start 58.19 103) (end 58 103.19) (width 0.3) (layer F.Cu) (net 47))
(segment (start 57.646447 103.19) (end 58 103.19) (width 0.3) (layer B.Cu) (net 47))
(segment (start 56.25 105) (end 58 103.25) (width 0.3) (layer B.Cu) (net 47))
(segment (start 56.3825 102.03) (end 56.3825 102.505) (width 0.3) (layer B.Cu) (net 47) (status 10))
(segment (start 57.0675 103.19) (end 57.646447 103.19) (width 0.3) (layer B.Cu) (net 47))
(segment (start 56.3825 102.505) (end 57.0675 103.19) (width 0.3) (layer B.Cu) (net 47))
(segment (start 58 103.25) (end 58 103.19) (width 0.3) (layer B.Cu) (net 47))
(segment (start 59.975 103) (end 58.19 103) (width 0.3) (layer F.Cu) (net 47) (status 10))
(segment (start 78.5 56.4375) (end 78.0625 56) (width 1) (layer F.Cu) (net 48) (status 30))
(segment (start 78.5 63.9) (end 78.5 56.4375) (width 1) (layer F.Cu) (net 48) (status 30))
(segment (start 77.725 63.125) (end 78.5 63.9) (width 1) (layer F.Cu) (net 48) (status 30))
(segment (start 73 63.125) (end 77.725 63.125) (width 1) (layer F.Cu) (net 48) (status 30))
(segment (start 53.25 50.75) (end 52.75 50.75) (width 0.6) (layer F.Cu) (net 48))
(segment (start 69.256386 63.125) (end 63.5 57.368614) (width 0.6) (layer F.Cu) (net 48))
(segment (start 73 63.125) (end 69.256386 63.125) (width 0.6) (layer F.Cu) (net 48))
(segment (start 63.5 55.75) (end 58.5 50.75) (width 0.6) (layer F.Cu) (net 48))
(segment (start 63.5 57.368614) (end 63.5 55.75) (width 0.6) (layer F.Cu) (net 48))
(segment (start 58.5 50.75) (end 53.25 50.75) (width 0.6) (layer F.Cu) (net 48))
(segment (start 46.5 86.325) (end 46.5 67.75) (width 0.3) (layer F.Cu) (net 49))
(segment (start 46.5 67.75) (end 44.25 65.5) (width 0.3) (layer F.Cu) (net 49))
(via (at 34.25 65.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 49))
(segment (start 44.25 65.5) (end 34.25 65.5) (width 0.3) (layer F.Cu) (net 49))
(via (at 32 65.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 49))
(segment (start 34.25 65.5) (end 32 65.5) (width 0.3) (layer B.Cu) (net 49))
(segment (start 29.25 67.5) (end 28 67.5) (width 0.3) (layer F.Cu) (net 49))
(segment (start 32 65.5) (end 31.25 65.5) (width 0.3) (layer F.Cu) (net 49))
(segment (start 31.25 65.5) (end 29.25 67.5) (width 0.3) (layer F.Cu) (net 49))
(segment (start 32 65.5) (end 32 66.7125) (width 0.3) (layer B.Cu) (net 49))
(segment (start 86 95.7125) (end 86.2875 96) (width 0.3) (layer B.Cu) (net 50) (status 30))
(segment (start 86 93.95) (end 86 95.7125) (width 0.3) (layer B.Cu) (net 50) (status 30))
(segment (start 86.2875 96) (end 86.2875 98) (width 0.3) (layer B.Cu) (net 50) (status 30))
(segment (start 78.7125 84) (end 77.6 84) (width 0.4) (layer F.Cu) (net 51) (status 10))
(segment (start 77.6 84) (end 76.95 84.65) (width 0.4) (layer F.Cu) (net 51) (status 20))
(segment (start 78.7125 82) (end 78.7125 84) (width 0.4) (layer F.Cu) (net 51) (status 30))
(segment (start 76.7875 82) (end 78.7125 82) (width 0.4) (layer F.Cu) (net 51) (status 30))
(segment (start 76.65 84.95) (end 76.95 84.65) (width 0.25) (layer F.Cu) (net 51))
(segment (start 76.65 85.05) (end 76.65 84.95) (width 0.25) (layer F.Cu) (net 51))
(segment (start 60.5375 108) (end 62.7125 108) (width 0.3) (layer F.Cu) (net 52))
(segment (start 60.5375 109.5) (end 60.5375 108) (width 0.25) (layer F.Cu) (net 52))
(segment (start 30.25 26) (end 43 26) (width 1) (layer F.Cu) (net 53) (status 10))
(segment (start 45.5 28.5) (end 45.5 35.42) (width 1) (layer F.Cu) (net 53) (status 20))
(segment (start 43 26) (end 45.5 28.5) (width 1) (layer F.Cu) (net 53))
(segment (start 60 40.5) (end 50.58 40.5) (width 1) (layer F.Cu) (net 54) (status 30))
(segment (start 25.2375 54.5) (end 26.775 54.5) (width 0.3) (layer F.Cu) (net 55))
(segment (start 24.2125 55.525) (end 25.2375 54.5) (width 0.3) (layer F.Cu) (net 55) (status 10))
(segment (start 24.2125 56) (end 24.2125 55.525) (width 0.3) (layer F.Cu) (net 55) (status 30))
(segment (start 28.2125 54.5) (end 27 54.5) (width 0.3) (layer F.Cu) (net 55) (status 10))
(segment (start 26.775 54.5) (end 27 54.5) (width 0.3) (layer F.Cu) (net 55))
(segment (start 27 54.5) (end 27.2125 54.5) (width 0.3) (layer F.Cu) (net 55))
(segment (start 57.25 30.5) (end 52.75 26) (width 1) (layer F.Cu) (net 56) (status 20))
(segment (start 60 30.5) (end 57.25 30.5) (width 1) (layer F.Cu) (net 56) (status 10))
(segment (start 87.975 88.7875) (end 87.5 88.7875) (width 0.3) (layer B.Cu) (net 57) (status 20))
(segment (start 88 88.8125) (end 87.975 88.7875) (width 0.3) (layer B.Cu) (net 57))
(segment (start 88 93) (end 88 88.8125) (width 0.3) (layer B.Cu) (net 57) (status 10))
(segment (start 88 93) (end 91.5 93) (width 0.3) (layer B.Cu) (net 57) (status 30))
(segment (start 66 79.55) (end 66.05 79.5) (width 0.3) (layer F.Cu) (net 58) (status 30))
(segment (start 66 81.2125) (end 66 79.55) (width 0.3) (layer F.Cu) (net 58) (status 30))
(segment (start 72.75 73.1) (end 72.75 79.4) (width 0.6) (layer F.Cu) (net 59))
(segment (start 80.0375 87.2875) (end 79 87.2875) (width 0.6) (layer F.Cu) (net 59))
(segment (start 81 88.25) (end 80.0375 87.2875) (width 0.6) (layer F.Cu) (net 59))
(segment (start 78.6625 86.95) (end 79 87.2875) (width 0.3) (layer F.Cu) (net 59))
(segment (start 76.65 86.95) (end 78.6625 86.95) (width 0.3) (layer F.Cu) (net 59))
(segment (start 78.5875 97.2) (end 78.75 97.0375) (width 0.3) (layer F.Cu) (net 59))
(segment (start 77.15 97.2) (end 78.5875 97.2) (width 0.3) (layer F.Cu) (net 59))
(segment (start 80.5375 97.0375) (end 78.75 97.0375) (width 0.3) (layer F.Cu) (net 59))
(segment (start 81 97.5) (end 80.5375 97.0375) (width 0.3) (layer F.Cu) (net 59))
(segment (start 70.45 79.4) (end 72.75 79.4) (width 0.4) (layer F.Cu) (net 59))
(segment (start 69.9625 79.8875) (end 70.45 79.4) (width 0.4) (layer F.Cu) (net 59))
(segment (start 69.9625 81.5) (end 69.9625 79.8875) (width 0.4) (layer F.Cu) (net 59))
(segment (start 75.725 105.0375) (end 75.25 105.0375) (width 0.6) (layer F.Cu) (net 59))
(segment (start 81 99.7625) (end 75.725 105.0375) (width 0.6) (layer F.Cu) (net 59))
(segment (start 81 97.5) (end 81 99.7625) (width 0.6) (layer F.Cu) (net 59))
(segment (start 75.0875 105.2) (end 75.25 105.0375) (width 0.3) (layer F.Cu) (net 59))
(segment (start 73.65 105.2) (end 75.0875 105.2) (width 0.3) (layer F.Cu) (net 59))
(segment (start 74 78.15) (end 80.75 78.15) (width 1) (layer F.Cu) (net 59))
(segment (start 72.75 79.4) (end 74 78.15) (width 1) (layer F.Cu) (net 59))
(segment (start 81.7875 80.01875) (end 81.7875 80.25) (width 0.3) (layer F.Cu) (net 59))
(segment (start 86.5 86.25) (end 84.5 88.25) (width 1) (layer F.Cu) (net 59))
(segment (start 80.75 78.15) (end 85.15 78.15) (width 1) (layer F.Cu) (net 59))
(segment (start 84.5 88.25) (end 81 88.25) (width 1) (layer F.Cu) (net 59))
(segment (start 86.5 79.5) (end 86.5 86.25) (width 1) (layer F.Cu) (net 59))
(segment (start 85.15 78.15) (end 86.5 79.5) (width 1) (layer F.Cu) (net 59))
(segment (start 81.7875 79.1875) (end 80.75 78.15) (width 0.3) (layer F.Cu) (net 59))
(segment (start 81.7875 80.25) (end 81.7875 79.1875) (width 0.3) (layer F.Cu) (net 59))
(segment (start 72.5875 93.7) (end 72.75 93.5375) (width 0.3) (layer F.Cu) (net 59))
(segment (start 71.15 93.7) (end 72.5875 93.7) (width 0.3) (layer F.Cu) (net 59))
(segment (start 81 97.5) (end 81 91.75) (width 1) (layer F.Cu) (net 59))
(segment (start 81 91.75) (end 81 88.25) (width 1) (layer F.Cu) (net 59))
Move vias to better locations: These vias have proven unfortunately placed for hand soldering
2020-02-05 22:12:31 +01:00
(segment (start 75.2625 91.5) (end 76.646447 91.5) (width 0.3) (layer F.Cu) (net 59))
(segment (start 73.225 93.5375) (end 75.2625 91.5) (width 0.3) (layer F.Cu) (net 59))
(segment (start 72.75 93.5375) (end 73.225 93.5375) (width 0.3) (layer F.Cu) (net 59))
(segment (start 76.646447 91.5) (end 77 91.5) (width 0.3) (layer F.Cu) (net 59))
(via (at 77 91.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 59))
(segment (start 77 91.5) (end 80.249994 91.5) (width 0.3) (layer B.Cu) (net 59))
(via (at 80.249994 91.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 59))
(segment (start 81 91.5) (end 80.249994 91.5) (width 0.3) (layer F.Cu) (net 59))
(segment (start 81 91.75) (end 81 91.5) (width 0.3) (layer F.Cu) (net 59))
Re-annotate components
2020-02-05 18:58:36 +01:00
(segment (start 46.0875 106.2875) (end 46.5 106.7) (width 0.3) (layer F.Cu) (net 63) (status 30))
(segment (start 44.5 106.2875) (end 46.0875 106.2875) (width 0.3) (layer F.Cu) (net 63) (status 30))
(via (at 48.14 106.72) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 63))
(segment (start 46.5 106.7) (end 48.12 106.7) (width 0.3) (layer F.Cu) (net 63) (status 10))
(segment (start 48.12 106.7) (end 48.14 106.72) (width 0.3) (layer F.Cu) (net 63))
(segment (start 47.7125 106.2925) (end 47.7125 105.5) (width 0.3) (layer B.Cu) (net 63) (status 20))
(segment (start 48.14 106.72) (end 47.7125 106.2925) (width 0.3) (layer B.Cu) (net 63))
(segment (start 48 106.58) (end 48.14 106.72) (width 0.3) (layer F.Cu) (net 63))
(segment (start 48 101.675) (end 48 106.58) (width 0.3) (layer F.Cu) (net 63) (status 10))
(segment (start 50.9125 104.7125) (end 50.5 104.3) (width 0.3) (layer F.Cu) (net 64) (status 30))
(segment (start 52.5 104.7125) (end 50.9125 104.7125) (width 0.3) (layer F.Cu) (net 64) (status 30))
(segment (start 49.05 104.26) (end 49.09 104.3) (width 0.3) (layer F.Cu) (net 64))
(segment (start 49.2875 104.4975) (end 49.2875 105.5) (width 0.3) (layer B.Cu) (net 64) (status 20))
(segment (start 49.09 104.3) (end 50.5 104.3) (width 0.3) (layer F.Cu) (net 64) (status 20))
(via (at 49.05 104.26) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 64))
(segment (start 49.05 104.26) (end 49.2875 104.4975) (width 0.3) (layer B.Cu) (net 64))
(segment (start 48.5 103.71) (end 49.05 104.26) (width 0.3) (layer F.Cu) (net 64))
(segment (start 48.5 101.675) (end 48.5 103.71) (width 0.3) (layer F.Cu) (net 64) (status 10))
(segment (start 58.2125 88.5) (end 56.175 88.5) (width 0.3) (layer F.Cu) (net 65) (status 30))
(segment (start 26.5 59) (end 23.5 59) (width 0.3) (layer B.Cu) (net 66) (status 20))
(segment (start 57.04 58.08) (end 48.78 58.08) (width 0.3) (layer B.Cu) (net 66))
(segment (start 46.629999 60.230001) (end 27.730001 60.230001) (width 0.3) (layer B.Cu) (net 66))
(segment (start 27.730001 60.230001) (end 26.5 59) (width 0.3) (layer B.Cu) (net 66))
(segment (start 48.78 58.08) (end 46.629999 60.230001) (width 0.3) (layer B.Cu) (net 66))
(segment (start 52.7775 81.2875) (end 52.85 81.215) (width 0.3) (layer F.Cu) (net 66) (status 30))
(segment (start 50 81.2875) (end 52.7775 81.2875) (width 0.3) (layer F.Cu) (net 66) (status 30))
(segment (start 57.04 58.08) (end 59.96 61) (width 0.3) (layer B.Cu) (net 66) (status 20))
(via (at 54.9 80.28) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 66))
(segment (start 52.85 81.215) (end 53.965 81.215) (width 0.4) (layer F.Cu) (net 66) (status 10))
(segment (start 53.965 81.215) (end 54.9 80.28) (width 0.4) (layer F.Cu) (net 66))
(segment (start 59.96 59.797919) (end 59.96 61) (width 0.6) (layer F.Cu) (net 66))
(segment (start 59.96 54.561018) (end 59.96 59.797919) (width 0.6) (layer F.Cu) (net 66))
(segment (start 52.00001 52.00001) (end 57.398992 52.00001) (width 0.6) (layer F.Cu) (net 66))
(segment (start 50.75 50.75) (end 52.00001 52.00001) (width 0.6) (layer F.Cu) (net 66))
(segment (start 57.398992 52.00001) (end 59.96 54.561018) (width 0.6) (layer F.Cu) (net 66))
(segment (start 59.96 61) (end 61.299999 62.339999) (width 0.3) (layer B.Cu) (net 66))
(segment (start 61.25 70.249974) (end 61.25 65) (width 0.4) (layer B.Cu) (net 66))
(segment (start 54.9 80.28) (end 54.9 76.599974) (width 0.4) (layer B.Cu) (net 66))
(segment (start 54.9 76.599974) (end 61.25 70.249974) (width 0.4) (layer B.Cu) (net 66))
(segment (start 61.299999 64.950001) (end 61.25 65) (width 0.3) (layer B.Cu) (net 66))
(segment (start 61.299999 62.339999) (end 61.299999 64.950001) (width 0.3) (layer B.Cu) (net 66))
(segment (start 43.5 86.325) (end 43.5 83.5) (width 0.3) (layer F.Cu) (net 67) (status 30))
(via (at 53.83 91.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 68))
(via (at 52.94 95.44) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 68))
(segment (start 53 97.7125) (end 53 95.5) (width 0.3) (layer B.Cu) (net 68) (status 10))
(segment (start 53 95.5) (end 52.94 95.44) (width 0.3) (layer B.Cu) (net 68))
(segment (start 53.83 94.55) (end 52.94 95.44) (width 0.3) (layer F.Cu) (net 68))
(segment (start 53.83 91.25) (end 53.83 94.55) (width 0.3) (layer F.Cu) (net 68))
(segment (start 76.45 79) (end 74.55 79) (width 0.4) (layer B.Cu) (net 68))
(via (at 79 80.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 68))
(segment (start 75.9875 80.75) (end 79 80.75) (width 0.4) (layer F.Cu) (net 68))
(segment (start 75.2125 82) (end 75.2125 81.525) (width 0.4) (layer F.Cu) (net 68))
(segment (start 75.2125 81.525) (end 75.9875 80.75) (width 0.4) (layer F.Cu) (net 68))
(segment (start 79 80.75) (end 79 79.75) (width 0.4) (layer B.Cu) (net 68))
(segment (start 78.25 79) (end 76.45 79) (width 0.4) (layer B.Cu) (net 68))
(segment (start 79 79.75) (end 78.25 79) (width 0.4) (layer B.Cu) (net 68))
(segment (start 79.5 80.25) (end 79 80.75) (width 0.3) (layer F.Cu) (net 68))
(segment (start 80.2125 80.25) (end 79.5 80.25) (width 0.3) (layer F.Cu) (net 68))
(segment (start 72.25 79) (end 74.55 79) (width 0.4) (layer B.Cu) (net 68))
(segment (start 71.5 79.75) (end 72.25 79) (width 0.4) (layer B.Cu) (net 68))
(segment (start 65.25 79.75) (end 71.5 79.75) (width 0.4) (layer B.Cu) (net 68))
(segment (start 53.83 91.25) (end 53.83 91.17) (width 0.4) (layer B.Cu) (net 68))
(segment (start 53.83 91.17) (end 65.25 79.75) (width 0.4) (layer B.Cu) (net 68))
(via (at 83.5 81) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 68))
(segment (start 83.5 82.25) (end 83.5 81) (width 0.3) (layer F.Cu) (net 68))
(segment (start 79.249999 80.999999) (end 79 80.75) (width 0.3) (layer B.Cu) (net 68))
(segment (start 83.5 81) (end 79.249999 80.999999) (width 0.3) (layer B.Cu) (net 68))
(segment (start 68 95.4625) (end 67.9625 95.5) (width 0.25) (layer F.Cu) (net 69))
(segment (start 68 93.7875) (end 68 95.4625) (width 0.25) (layer F.Cu) (net 69))
(segment (start 67.9625 95.5) (end 67.9625 97) (width 0.25) (layer F.Cu) (net 69))
(segment (start 69.85 92.4125) (end 69.85 92.375) (width 0.25) (layer F.Cu) (net 69))
(segment (start 69.85 92.375) (end 69.85 91.8) (width 0.25) (layer F.Cu) (net 69))
(segment (start 68.475 93.7875) (end 69.85 92.4125) (width 0.25) (layer F.Cu) (net 69))
(segment (start 68 93.7875) (end 68.475 93.7875) (width 0.25) (layer F.Cu) (net 69))
(segment (start 69.5375 95.5) (end 69.5375 97) (width 0.25) (layer F.Cu) (net 70))
(segment (start 69.85 95.1875) (end 69.5375 95.5) (width 0.25) (layer F.Cu) (net 70))
(segment (start 69.85 93.7) (end 69.85 95.1875) (width 0.25) (layer F.Cu) (net 70))
(segment (start 70.9625 97) (end 71 96.9625) (width 0.25) (layer F.Cu) (net 70))
(segment (start 69.5375 97) (end 70.9625 97) (width 0.25) (layer F.Cu) (net 70))
(segment (start 75.7125 95.1625) (end 75.85 95.3) (width 0.25) (layer F.Cu) (net 71))
(segment (start 75.7125 93.5) (end 75.7125 95.1625) (width 0.25) (layer F.Cu) (net 71))
(segment (start 74.4125 95.3) (end 74.25 95.4625) (width 0.25) (layer F.Cu) (net 71))
(segment (start 75.85 95.3) (end 74.4125 95.3) (width 0.25) (layer F.Cu) (net 71))
(segment (start 72.75 95.4625) (end 74.25 95.4625) (width 0.25) (layer F.Cu) (net 71))
(segment (start 72.75 98.4625) (end 72.7125 98.5) (width 0.25) (layer F.Cu) (net 72))
(segment (start 72.75 97.0375) (end 72.75 98.4625) (width 0.25) (layer F.Cu) (net 72))
(segment (start 72.75 97.0375) (end 74.25 97.0375) (width 0.25) (layer F.Cu) (net 72))
(segment (start 75.6875 97.0375) (end 75.85 97.2) (width 0.25) (layer F.Cu) (net 72))
(segment (start 74.25 97.0375) (end 75.6875 97.0375) (width 0.25) (layer F.Cu) (net 72))
(segment (start 72.25 101.7875) (end 73.75 101.7875) (width 0.4) (layer F.Cu) (net 73))
(segment (start 73.75 99.0375) (end 74.2875 98.5) (width 0.4) (layer F.Cu) (net 74))
(segment (start 73.75 100.2125) (end 73.75 99.0375) (width 0.4) (layer F.Cu) (net 74))
(segment (start 75.7125 98.5) (end 75.9625 98.75) (width 0.4) (layer F.Cu) (net 74))
(segment (start 74.2875 98.5) (end 75.7125 98.5) (width 0.4) (layer F.Cu) (net 74))
Move vias to better locations: These vias have proven unfortunately placed for hand soldering
2020-02-05 22:12:31 +01:00
(segment (start 75 102) (end 75 100.9875) (width 0.3) (layer F.Cu) (net 74))
(segment (start 73.65 103.3) (end 73.7 103.3) (width 0.3) (layer F.Cu) (net 74))
Re-annotate components
2020-02-05 18:58:36 +01:00
(segment (start 74.225 100.2125) (end 73.75 100.2125) (width 0.3) (layer F.Cu) (net 74))
Move vias to better locations: These vias have proven unfortunately placed for hand soldering
2020-02-05 22:12:31 +01:00
(segment (start 75 100.9875) (end 74.225 100.2125) (width 0.3) (layer F.Cu) (net 74))
(segment (start 73.7 103.3) (end 75 102) (width 0.3) (layer F.Cu) (net 74))
Re-annotate components
2020-02-05 18:58:36 +01:00
(segment (start 71 98.9625) (end 72.25 100.2125) (width 0.4) (layer F.Cu) (net 78))
(segment (start 71 98.5375) (end 71 98.9625) (width 0.4) (layer F.Cu) (net 78))
(segment (start 70.6625 103.3) (end 70.5 103.4625) (width 0.3) (layer F.Cu) (net 78))
(segment (start 72.35 103.3) (end 70.6625 103.3) (width 0.3) (layer F.Cu) (net 78))
(segment (start 71.775 100.2125) (end 72.25 100.2125) (width 0.3) (layer F.Cu) (net 78))
(segment (start 71.25 100.7375) (end 71.775 100.2125) (width 0.3) (layer F.Cu) (net 78))
(segment (start 72.35 103.3) (end 71.25 103.3) (width 0.3) (layer F.Cu) (net 78))
(segment (start 71.25 103.3) (end 71.25 100.7375) (width 0.3) (layer F.Cu) (net 78))
(segment (start 70.6625 105.2) (end 70.5 105.0375) (width 0.3) (layer F.Cu) (net 79))
(segment (start 72.35 105.2) (end 70.6625 105.2) (width 0.3) (layer F.Cu) (net 79))
(segment (start 70.5 105.475) (end 70.5 105.0375) (width 0.3) (layer F.Cu) (net 79))
(segment (start 69.475 106.5) (end 70.5 105.475) (width 0.3) (layer F.Cu) (net 79))
(segment (start 60.5375 106.5) (end 69.475 106.5) (width 0.3) (layer F.Cu) (net 79))
(via (at 59.8 79.97) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 80))
(segment (start 59.825 79.945) (end 59.8 79.97) (width 0.3) (layer F.Cu) (net 80))
(segment (start 62.15 79.945) (end 59.825 79.945) (width 0.3) (layer F.Cu) (net 80) (status 10))
(segment (start 49.89 88.14) (end 49.89 89.04) (width 0.3) (layer F.Cu) (net 80))
(segment (start 45.43 93.5) (end 40.825 93.5) (width 0.3) (layer F.Cu) (net 80) (status 20))
(via (at 49.89 88.14) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 80))
(segment (start 49.89 89.04) (end 45.43 93.5) (width 0.3) (layer F.Cu) (net 80))
(segment (start 59.8 80.56) (end 59.8 79.97) (width 0.3) (layer B.Cu) (net 80))
(segment (start 56.36 84) (end 59.8 80.56) (width 0.3) (layer B.Cu) (net 80))
(segment (start 54.93 84) (end 56.36 84) (width 0.3) (layer B.Cu) (net 80))
(segment (start 49.89 88.14) (end 50.79 88.14) (width 0.3) (layer B.Cu) (net 80))
(segment (start 50.79 88.14) (end 54.93 84) (width 0.3) (layer B.Cu) (net 80))
(via (at 50 90) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 81))
(segment (start 46 94) (end 50 90) (width 0.3) (layer F.Cu) (net 81))
(segment (start 40.825 94) (end 46 94) (width 0.3) (layer F.Cu) (net 81) (status 10))
(via (at 64.25 77.500016) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 81))
(segment (start 64.154984 77.405) (end 64.25 77.500016) (width 0.3) (layer F.Cu) (net 81))
(segment (start 62.15 77.405) (end 64.154984 77.405) (width 0.3) (layer F.Cu) (net 81) (status 10))
(segment (start 64.25 78) (end 64.25 77.500016) (width 0.3) (layer B.Cu) (net 81))
(segment (start 64.25 78.25) (end 64.25 78) (width 0.3) (layer B.Cu) (net 81))
(segment (start 50 90) (end 52.5 90) (width 0.3) (layer B.Cu) (net 81))
(segment (start 52.5 90) (end 64.25 78.25) (width 0.3) (layer B.Cu) (net 81))
(segment (start 62.15 74.865) (end 64.005 74.865) (width 0.3) (layer F.Cu) (net 82) (status 10))
(via (at 64.05 74.82) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 82))
(segment (start 64.005 74.865) (end 64.05 74.82) (width 0.3) (layer F.Cu) (net 82))
(segment (start 52.5 84.76) (end 52.5 86.325) (width 0.3) (layer F.Cu) (net 82) (status 20))
(segment (start 57.37 81.2) (end 56.06 81.2) (width 0.3) (layer F.Cu) (net 82))
(segment (start 56.06 81.2) (end 52.5 84.76) (width 0.3) (layer F.Cu) (net 82))
(via (at 57.37 81.2) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 82))
(segment (start 64.01 74.78) (end 64.05 74.82) (width 0.3) (layer B.Cu) (net 82))
(segment (start 61.94 74.78) (end 64.01 74.78) (width 0.3) (layer B.Cu) (net 82))
(segment (start 57.65 79.07) (end 61.94 74.78) (width 0.3) (layer B.Cu) (net 82))
(segment (start 57.37 81.2) (end 57.65 80.92) (width 0.3) (layer B.Cu) (net 82))
(segment (start 57.65 80.92) (end 57.65 79.07) (width 0.3) (layer B.Cu) (net 82))
(via (at 60.34 72.4) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 84))
(segment (start 60.415 72.325) (end 62.15 72.325) (width 0.3) (layer F.Cu) (net 84) (status 20))
(segment (start 60.34 72.4) (end 60.415 72.325) (width 0.3) (layer F.Cu) (net 84))
(segment (start 56.5 76.24) (end 56.5 79.646447) (width 0.3) (layer B.Cu) (net 84))
(segment (start 52 86.325) (end 52 84.5) (width 0.3) (layer F.Cu) (net 84))
(segment (start 56.5 79.646447) (end 56.5 80) (width 0.3) (layer B.Cu) (net 84))
(segment (start 52 84.5) (end 56.250001 80.249999) (width 0.3) (layer F.Cu) (net 84))
(segment (start 60.34 72.4) (end 56.5 76.24) (width 0.3) (layer B.Cu) (net 84))
(via (at 56.5 80) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 84))
(segment (start 56.250001 80.249999) (end 56.5 80) (width 0.3) (layer F.Cu) (net 84))
(segment (start 48.25 75.83) (end 49.215 74.865) (width 0.3) (layer F.Cu) (net 86))
(segment (start 49.215 74.865) (end 52.85 74.865) (width 0.3) (layer F.Cu) (net 86) (status 20))
(segment (start 48.25 82.15) (end 48.25 75.83) (width 0.3) (layer F.Cu) (net 86))
(segment (start 51 86.325) (end 51 84.9) (width 0.3) (layer F.Cu) (net 86) (status 10))
(segment (start 51 84.9) (end 48.25 82.15) (width 0.3) (layer F.Cu) (net 86))
(segment (start 52.85 77.405) (end 49.595 77.405) (width 0.3) (layer F.Cu) (net 87) (status 10))
(segment (start 49.595 77.405) (end 48.77 78.23) (width 0.3) (layer F.Cu) (net 87))
(segment (start 48.77 78.23) (end 48.77 81.75) (width 0.3) (layer F.Cu) (net 87))
(segment (start 51.5 84.48) (end 51.5 86.325) (width 0.3) (layer F.Cu) (net 87) (status 20))
(segment (start 48.77 81.75) (end 51.5 84.48) (width 0.3) (layer F.Cu) (net 87))
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(zone (net 2) (net_name GND) (layer F.Cu) (tstamp 5E1002D7) (hatch edge 0.508)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(connect_pads (clearance 0.25))
(min_thickness 0.254)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
(fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(polygon
(pts
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 64 52) (xy 82 52) (xy 82 72.5) (xy 97.5 72.5) (xy 98 110.5)
(xy 67 110.5) (xy 64.5 110.5) (xy 18 110.5) (xy 18 18) (xy 64 18)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
)
)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
(filled_polygon
(pts
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 21.823001 19.066738) (xy 21.822681 19.069986) (xy 21.821201 19.071201) (xy 21.746885 19.161756) (xy 21.691664 19.265068)
(xy 21.657658 19.377169) (xy 21.646176 19.49375) (xy 21.646176 19.93125) (xy 21.657658 20.047831) (xy 21.691664 20.159932)
(xy 21.746885 20.263244) (xy 21.755666 20.273943) (xy 21.670506 20.319463) (xy 21.573815 20.398815) (xy 21.494463 20.495506)
(xy 21.435498 20.60582) (xy 21.399188 20.725518) (xy 21.386928 20.85) (xy 21.39 21.00175) (xy 21.54875 21.1605)
(xy 22.373 21.1605) (xy 22.373 21.1405) (xy 22.627 21.1405) (xy 22.627 21.1605) (xy 23.45125 21.1605)
(xy 23.61 21.00175) (xy 23.613072 20.85) (xy 23.600812 20.725518) (xy 23.564502 20.60582) (xy 23.505537 20.495506)
(xy 23.426185 20.398815) (xy 23.329494 20.319463) (xy 23.244334 20.273943) (xy 23.253115 20.263244) (xy 23.308336 20.159932)
(xy 23.342342 20.047831) (xy 23.353824 19.93125) (xy 23.353824 19.777) (xy 25.326839 19.777) (xy 25.352152 19.824356)
(xy 25.430354 19.919646) (xy 25.525644 19.997848) (xy 25.634359 20.055958) (xy 25.752323 20.091741) (xy 25.875 20.103824)
(xy 27.125 20.103824) (xy 27.247677 20.091741) (xy 27.365641 20.055958) (xy 27.474356 19.997848) (xy 27.569646 19.919646)
(xy 27.647848 19.824356) (xy 27.705958 19.715641) (xy 27.741741 19.597677) (xy 27.753824 19.475) (xy 27.753824 18.725)
(xy 27.741741 18.602323) (xy 27.705958 18.484359) (xy 27.647848 18.375644) (xy 27.569646 18.280354) (xy 27.474356 18.202152)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(xy 27.365641 18.144042) (xy 27.30946 18.127) (xy 29.095064 18.127) (xy 29.789866 18.590201) (xy 29.854664 18.624836)
(xy 29.925707 18.646467) (xy 29.999604 18.653824) (xy 30.073516 18.646622) (xy 30.144603 18.625139) (xy 30.210134 18.590201)
(xy 30.904936 18.127) (xy 52.095064 18.127) (xy 52.789866 18.590201) (xy 52.854664 18.624836) (xy 52.925707 18.646467)
(xy 52.999604 18.653824) (xy 53.073516 18.646622) (xy 53.144603 18.625139) (xy 53.210134 18.590201) (xy 53.904936 18.127)
(xy 63.873 18.127) (xy 63.873 52) (xy 63.87544 52.024776) (xy 63.882667 52.048601) (xy 63.894403 52.070557)
(xy 63.910197 52.089803) (xy 63.929443 52.105597) (xy 63.951399 52.117333) (xy 63.975224 52.12456) (xy 64 52.127)
(xy 81.873 52.127) (xy 81.873 72.5) (xy 81.87544 72.524776) (xy 81.882667 72.548601) (xy 81.894403 72.570557)
(xy 81.910197 72.589803) (xy 81.929443 72.605597) (xy 81.951399 72.617333) (xy 81.975224 72.62456) (xy 82 72.627)
(xy 97.37466 72.627) (xy 97.572123 87.634211) (xy 97.565628 87.622059) (xy 97.481027 87.518973) (xy 97.377941 87.434372)
(xy 97.26033 87.371508) (xy 97.132715 87.332796) (xy 97.099188 87.329494) (xy 97 87.319725) (xy 96.966748 87.323)
(xy 93.67816 87.323) (xy 93.632118 87.236861) (xy 93.461292 87.028708) (xy 93.253139 86.857882) (xy 93.015659 86.730946)
(xy 92.757979 86.65278) (xy 92.557152 86.633) (xy 90.442848 86.633) (xy 90.242021 86.65278) (xy 89.984341 86.730946)
(xy 89.746861 86.857882) (xy 89.538708 87.028708) (xy 89.367882 87.236861) (xy 89.240946 87.474341) (xy 89.16278 87.732021)
(xy 89.136386 88) (xy 89.16278 88.267979) (xy 89.240946 88.525659) (xy 89.367882 88.763139) (xy 89.538708 88.971292)
(xy 89.746861 89.142118) (xy 89.984341 89.269054) (xy 90.242021 89.34722) (xy 90.442848 89.367) (xy 92.557152 89.367)
(xy 92.757979 89.34722) (xy 93.015659 89.269054) (xy 93.253139 89.142118) (xy 93.461292 88.971292) (xy 93.632118 88.763139)
(xy 93.67816 88.677) (xy 96.323001 88.677) (xy 96.323 90.953251) (xy 96.323001 90.953261) (xy 96.323 96.719577)
Finalize version v1.0
2020-01-03 21:26:29 +01:00
(xy 93.504941 99.537637) (xy 93.194345 99.330103) (xy 92.543373 99.060462) (xy 91.852304 98.923) (xy 91.147696 98.923)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(xy 90.456627 99.060462) (xy 89.805655 99.330103) (xy 89.219795 99.721562) (xy 88.721562 100.219795) (xy 88.330103 100.805655)
(xy 88.060462 101.456627) (xy 87.987586 101.823) (xy 87.898702 101.823) (xy 87.891741 101.752323) (xy 87.855958 101.634359)
(xy 87.797848 101.525644) (xy 87.719646 101.430354) (xy 87.624356 101.352152) (xy 87.515641 101.294042) (xy 87.397677 101.258259)
(xy 87.275 101.246176) (xy 86.525 101.246176) (xy 86.402323 101.258259) (xy 86.284359 101.294042) (xy 86.175644 101.352152)
(xy 86.080354 101.430354) (xy 86.002152 101.525644) (xy 85.944042 101.634359) (xy 85.908259 101.752323) (xy 85.896176 101.875)
(xy 85.896176 103.125) (xy 85.908259 103.247677) (xy 85.944042 103.365641) (xy 86.002152 103.474356) (xy 86.080354 103.569646)
(xy 86.175644 103.647848) (xy 86.284359 103.705958) (xy 86.402323 103.741741) (xy 86.525 103.753824) (xy 87.275 103.753824)
(xy 87.397677 103.741741) (xy 87.515641 103.705958) (xy 87.624356 103.647848) (xy 87.719646 103.569646) (xy 87.797848 103.474356)
(xy 87.855958 103.365641) (xy 87.891741 103.247677) (xy 87.898702 103.177) (xy 87.987586 103.177) (xy 88.060462 103.543373)
Finalize version v1.0
2020-01-03 21:26:29 +01:00
(xy 88.330103 104.194345) (xy 88.721562 104.780205) (xy 89.219795 105.278438) (xy 89.805655 105.669897) (xy 90.123 105.801346)
Re-annotate components
2020-02-05 18:58:36 +01:00
(xy 90.123001 110.373) (xy 59.894833 110.373) (xy 59.930537 110.329494) (xy 59.976057 110.244334) (xy 59.986756 110.253115)
(xy 60.090068 110.308336) (xy 60.202169 110.342342) (xy 60.31875 110.353824) (xy 60.75625 110.353824) (xy 60.872831 110.342342)
(xy 60.984932 110.308336) (xy 61.088244 110.253115) (xy 61.178799 110.178799) (xy 61.253115 110.088244) (xy 61.308336 109.984932)
(xy 61.342342 109.872831) (xy 61.353824 109.75625) (xy 61.353824 109.24375) (xy 61.342342 109.127169) (xy 61.308336 109.015068)
(xy 61.253115 108.911756) (xy 61.178799 108.821201) (xy 61.09204 108.75) (xy 61.178799 108.678799) (xy 61.253115 108.588244)
(xy 61.28585 108.527) (xy 61.96415 108.527) (xy 61.996885 108.588244) (xy 62.071201 108.678799) (xy 62.161756 108.753115)
(xy 62.265068 108.808336) (xy 62.377169 108.842342) (xy 62.49375 108.853824) (xy 62.93125 108.853824) (xy 63.047831 108.842342)
(xy 63.159932 108.808336) (xy 63.263244 108.753115) (xy 63.273943 108.744334) (xy 63.319463 108.829494) (xy 63.398815 108.926185)
(xy 63.495506 109.005537) (xy 63.60582 109.064502) (xy 63.725518 109.100812) (xy 63.85 109.113072) (xy 64.00175 109.11)
(xy 64.1605 108.95125) (xy 64.1605 108.127) (xy 64.4145 108.127) (xy 64.4145 108.95125) (xy 64.57325 109.11)
(xy 64.725 109.113072) (xy 64.849482 109.100812) (xy 64.96918 109.064502) (xy 65.079494 109.005537) (xy 65.176185 108.926185)
(xy 65.255537 108.829494) (xy 65.314502 108.71918) (xy 65.350812 108.599482) (xy 65.363072 108.475) (xy 65.36 108.28575)
(xy 65.20125 108.127) (xy 64.4145 108.127) (xy 64.1605 108.127) (xy 64.1405 108.127) (xy 64.1405 107.873)
(xy 64.1605 107.873) (xy 64.1605 107.853) (xy 64.4145 107.853) (xy 64.4145 107.873) (xy 65.20125 107.873)
(xy 65.36 107.71425) (xy 65.363072 107.525) (xy 65.350812 107.400518) (xy 65.314502 107.28082) (xy 65.255537 107.170506)
(xy 65.176185 107.073815) (xy 65.119141 107.027) (xy 69.449119 107.027) (xy 69.475 107.029549) (xy 69.500881 107.027)
(xy 69.57831 107.019374) (xy 69.67765 106.989239) (xy 69.769202 106.940304) (xy 69.849448 106.874448) (xy 69.865955 106.854334)
(xy 70.854339 105.865951) (xy 70.874448 105.849448) (xy 70.882749 105.839333) (xy 70.984932 105.808336) (xy 71.088244 105.753115)
(xy 71.120065 105.727) (xy 71.830495 105.727) (xy 71.835019 105.735463) (xy 71.882131 105.792869) (xy 71.939537 105.839981)
(xy 72.00503 105.874988) (xy 72.076095 105.896545) (xy 72.15 105.903824) (xy 72.55 105.903824) (xy 72.623905 105.896545)
(xy 72.69497 105.874988) (xy 72.760463 105.839981) (xy 72.817869 105.792869) (xy 72.864981 105.735463) (xy 72.899988 105.66997)
(xy 72.921545 105.598905) (xy 72.928824 105.525) (xy 72.928824 104.875) (xy 72.921545 104.801095) (xy 72.899988 104.73003)
(xy 72.864981 104.664537) (xy 72.817869 104.607131) (xy 72.760463 104.560019) (xy 72.69497 104.525012) (xy 72.623905 104.503455)
(xy 72.55 104.496176) (xy 72.15 104.496176) (xy 72.076095 104.503455) (xy 72.00503 104.525012) (xy 71.939537 104.560019)
(xy 71.882131 104.607131) (xy 71.835019 104.664537) (xy 71.830495 104.673) (xy 71.333494 104.673) (xy 71.308336 104.590068)
(xy 71.253115 104.486756) (xy 71.178799 104.396201) (xy 71.088244 104.321885) (xy 70.984932 104.266664) (xy 70.929999 104.25)
(xy 70.984932 104.233336) (xy 71.088244 104.178115) (xy 71.178799 104.103799) (xy 71.253115 104.013244) (xy 71.308336 103.909932)
(xy 71.333494 103.827) (xy 71.830495 103.827) (xy 71.835019 103.835463) (xy 71.882131 103.892869) (xy 71.939537 103.939981)
(xy 72.00503 103.974988) (xy 72.076095 103.996545) (xy 72.15 104.003824) (xy 72.290157 104.003824) (xy 72.337808 104.064903)
(xy 72.43251 104.146619) (xy 72.541334 104.20829) (xy 72.660098 104.247546) (xy 72.76825 104.26) (xy 72.927 104.10125)
(xy 72.927 103.643519) (xy 72.928824 103.625) (xy 72.928824 103.153) (xy 73.071176 103.153) (xy 73.071176 103.625)
(xy 73.073 103.643519) (xy 73.073 104.10125) (xy 73.23175 104.26) (xy 73.339902 104.247546) (xy 73.458666 104.20829)
(xy 73.56749 104.146619) (xy 73.662192 104.064903) (xy 73.709843 104.003824) (xy 73.85 104.003824) (xy 73.923905 103.996545)
(xy 73.99497 103.974988) (xy 74.060463 103.939981) (xy 74.117869 103.892869) (xy 74.137558 103.868878) (xy 74.136928 103.9)
(xy 74.149188 104.024482) (xy 74.185498 104.14418) (xy 74.244463 104.254494) (xy 74.323815 104.351185) (xy 74.420506 104.430537)
(xy 74.505666 104.476057) (xy 74.496885 104.486756) (xy 74.441664 104.590068) (xy 74.416506 104.673) (xy 74.169505 104.673)
(xy 74.164981 104.664537) (xy 74.117869 104.607131) (xy 74.060463 104.560019) (xy 73.99497 104.525012) (xy 73.923905 104.503455)
(xy 73.85 104.496176) (xy 73.45 104.496176) (xy 73.376095 104.503455) (xy 73.30503 104.525012) (xy 73.239537 104.560019)
(xy 73.182131 104.607131) (xy 73.135019 104.664537) (xy 73.100012 104.73003) (xy 73.078455 104.801095) (xy 73.071176 104.875)
(xy 73.071176 105.525) (xy 73.078455 105.598905) (xy 73.100012 105.66997) (xy 73.135019 105.735463) (xy 73.182131 105.792869)
(xy 73.239537 105.839981) (xy 73.30503 105.874988) (xy 73.376095 105.896545) (xy 73.45 105.903824) (xy 73.85 105.903824)
(xy 73.923905 105.896545) (xy 73.99497 105.874988) (xy 74.060463 105.839981) (xy 74.117869 105.792869) (xy 74.164981 105.735463)
(xy 74.169505 105.727) (xy 74.629935 105.727) (xy 74.661756 105.753115) (xy 74.765068 105.808336) (xy 74.877169 105.842342)
(xy 74.99375 105.853824) (xy 75.50625 105.853824) (xy 75.622831 105.842342) (xy 75.734932 105.808336) (xy 75.838244 105.753115)
(xy 75.920406 105.685687) (xy 75.98533 105.665992) (xy 76.102941 105.603128) (xy 76.206027 105.518527) (xy 76.227226 105.492696)
(xy 78.344922 103.375) (xy 82.836928 103.375) (xy 82.849188 103.499482) (xy 82.885498 103.61918) (xy 82.944463 103.729494)
(xy 83.023815 103.826185) (xy 83.120506 103.905537) (xy 83.23082 103.964502) (xy 83.350518 104.000812) (xy 83.475 104.013072)
(xy 83.81425 104.01) (xy 83.973 103.85125) (xy 83.973 102.627) (xy 84.227 102.627) (xy 84.227 103.85125)
(xy 84.38575 104.01) (xy 84.725 104.013072) (xy 84.849482 104.000812) (xy 84.96918 103.964502) (xy 85.079494 103.905537)
(xy 85.176185 103.826185) (xy 85.255537 103.729494) (xy 85.314502 103.61918) (xy 85.350812 103.499482) (xy 85.363072 103.375)
(xy 85.36 102.78575) (xy 85.20125 102.627) (xy 84.227 102.627) (xy 83.973 102.627) (xy 82.99875 102.627)
(xy 82.84 102.78575) (xy 82.836928 103.375) (xy 78.344922 103.375) (xy 80.094922 101.625) (xy 82.836928 101.625)
(xy 82.84 102.21425) (xy 82.99875 102.373) (xy 83.973 102.373) (xy 83.973 101.14875) (xy 84.227 101.14875)
(xy 84.227 102.373) (xy 85.20125 102.373) (xy 85.36 102.21425) (xy 85.363072 101.625) (xy 85.350812 101.500518)
(xy 85.314502 101.38082) (xy 85.255537 101.270506) (xy 85.176185 101.173815) (xy 85.079494 101.094463) (xy 84.96918 101.035498)
(xy 84.849482 100.999188) (xy 84.725 100.986928) (xy 84.38575 100.99) (xy 84.227 101.14875) (xy 83.973 101.14875)
(xy 83.81425 100.99) (xy 83.475 100.986928) (xy 83.350518 100.999188) (xy 83.23082 101.035498) (xy 83.120506 101.094463)
(xy 83.023815 101.173815) (xy 82.944463 101.270506) (xy 82.885498 101.38082) (xy 82.849188 101.500518) (xy 82.836928 101.625)
(xy 80.094922 101.625) (xy 81.455201 100.264722) (xy 81.481027 100.243527) (xy 81.505055 100.21425) (xy 81.565628 100.140441)
(xy 81.628492 100.02283) (xy 81.667204 99.895215) (xy 81.680275 99.7625) (xy 81.677 99.729248) (xy 81.677 98.057496)
(xy 81.732727 97.989592) (xy 81.814162 97.837237) (xy 81.86431 97.671922) (xy 81.877 97.543079) (xy 81.877 92.01)
(xy 89.141176 92.01) (xy 89.141176 93.99) (xy 89.148455 94.063905) (xy 89.170012 94.13497) (xy 89.205019 94.200463)
(xy 89.252131 94.257869) (xy 89.309537 94.304981) (xy 89.37503 94.339988) (xy 89.446095 94.361545) (xy 89.52 94.368824)
(xy 93.48 94.368824) (xy 93.553905 94.361545) (xy 93.62497 94.339988) (xy 93.690463 94.304981) (xy 93.747869 94.257869)
(xy 93.794981 94.200463) (xy 93.829988 94.13497) (xy 93.851545 94.063905) (xy 93.858824 93.99) (xy 93.858824 92.01)
(xy 93.851545 91.936095) (xy 93.829988 91.86503) (xy 93.794981 91.799537) (xy 93.747869 91.742131) (xy 93.690463 91.695019)
(xy 93.62497 91.660012) (xy 93.553905 91.638455) (xy 93.48 91.631176) (xy 89.52 91.631176) (xy 89.446095 91.638455)
(xy 89.37503 91.660012) (xy 89.309537 91.695019) (xy 89.252131 91.742131) (xy 89.205019 91.799537) (xy 89.170012 91.86503)
(xy 89.148455 91.936095) (xy 89.141176 92.01) (xy 81.877 92.01) (xy 81.877 89.127) (xy 84.456921 89.127)
(xy 84.5 89.131243) (xy 84.543079 89.127) (xy 84.585408 89.122831) (xy 84.671922 89.11431) (xy 84.733468 89.09564)
(xy 84.837237 89.064162) (xy 84.989592 88.982727) (xy 85.123133 88.873133) (xy 85.150597 88.839668) (xy 87.089674 86.900592)
(xy 87.123133 86.873133) (xy 87.165003 86.822115) (xy 87.232726 86.739593) (xy 87.233438 86.738261) (xy 87.314162 86.587237)
(xy 87.36431 86.421922) (xy 87.377 86.293079) (xy 87.377 86.293078) (xy 87.381243 86.250001) (xy 87.377 86.206924)
(xy 87.377 83) (xy 89.136386 83) (xy 89.16278 83.267979) (xy 89.240946 83.525659) (xy 89.367882 83.763139)
(xy 89.538708 83.971292) (xy 89.746861 84.142118) (xy 89.984341 84.269054) (xy 90.242021 84.34722) (xy 90.442848 84.367)
(xy 92.557152 84.367) (xy 92.757979 84.34722) (xy 93.015659 84.269054) (xy 93.253139 84.142118) (xy 93.461292 83.971292)
(xy 93.632118 83.763139) (xy 93.759054 83.525659) (xy 93.83722 83.267979) (xy 93.863614 83) (xy 93.83722 82.732021)
(xy 93.759054 82.474341) (xy 93.632118 82.236861) (xy 93.461292 82.028708) (xy 93.253139 81.857882) (xy 93.015659 81.730946)
(xy 92.757979 81.65278) (xy 92.557152 81.633) (xy 92.477 81.633) (xy 92.477 78.94976) (xy 92.497848 78.924356)
(xy 92.550955 78.825) (xy 93.136928 78.825) (xy 93.149188 78.949482) (xy 93.185498 79.06918) (xy 93.244463 79.179494)
(xy 93.323815 79.276185) (xy 93.420506 79.355537) (xy 93.53082 79.414502) (xy 93.650518 79.450812) (xy 93.775 79.463072)
(xy 94.11425 79.46) (xy 94.273 79.30125) (xy 94.273 77.627) (xy 94.527 77.627) (xy 94.527 79.30125)
(xy 94.68575 79.46) (xy 95.025 79.463072) (xy 95.149482 79.450812) (xy 95.26918 79.414502) (xy 95.379494 79.355537)
(xy 95.476185 79.276185) (xy 95.555537 79.179494) (xy 95.614502 79.06918) (xy 95.650812 78.949482) (xy 95.663072 78.825)
(xy 95.66 77.78575) (xy 95.50125 77.627) (xy 94.527 77.627) (xy 94.273 77.627) (xy 93.29875 77.627)
(xy 93.14 77.78575) (xy 93.136928 78.825) (xy 92.550955 78.825) (xy 92.555958 78.815641) (xy 92.591741 78.697677)
(xy 92.603824 78.575) (xy 92.603824 76.425) (xy 92.591741 76.302323) (xy 92.555958 76.184359) (xy 92.550956 76.175)
(xy 93.136928 76.175) (xy 93.14 77.21425) (xy 93.29875 77.373) (xy 94.273 77.373) (xy 94.273 75.69875)
(xy 94.527 75.69875) (xy 94.527 77.373) (xy 95.50125 77.373) (xy 95.66 77.21425) (xy 95.663072 76.175)
(xy 95.650812 76.050518) (xy 95.614502 75.93082) (xy 95.555537 75.820506) (xy 95.476185 75.723815) (xy 95.379494 75.644463)
(xy 95.26918 75.585498) (xy 95.149482 75.549188) (xy 95.025 75.536928) (xy 94.68575 75.54) (xy 94.527 75.69875)
(xy 94.273 75.69875) (xy 94.11425 75.54) (xy 93.775 75.536928) (xy 93.650518 75.549188) (xy 93.53082 75.585498)
(xy 93.420506 75.644463) (xy 93.323815 75.723815) (xy 93.244463 75.820506) (xy 93.185498 75.93082) (xy 93.149188 76.050518)
(xy 93.136928 76.175) (xy 92.550956 76.175) (xy 92.497848 76.075644) (xy 92.419646 75.980354) (xy 92.324356 75.902152)
(xy 92.215641 75.844042) (xy 92.097677 75.808259) (xy 91.975 75.796176) (xy 91.225 75.796176) (xy 91.102323 75.808259)
(xy 90.984359 75.844042) (xy 90.875644 75.902152) (xy 90.780354 75.980354) (xy 90.702152 76.075644) (xy 90.644042 76.184359)
(xy 90.608259 76.302323) (xy 90.596176 76.425) (xy 90.596176 78.575) (xy 90.608259 78.697677) (xy 90.644042 78.815641)
(xy 90.702152 78.924356) (xy 90.723 78.94976) (xy 90.723001 81.633) (xy 90.442848 81.633) (xy 90.242021 81.65278)
(xy 89.984341 81.730946) (xy 89.746861 81.857882) (xy 89.538708 82.028708) (xy 89.367882 82.236861) (xy 89.240946 82.474341)
(xy 89.16278 82.732021) (xy 89.136386 83) (xy 87.377 83) (xy 87.377 79.543069) (xy 87.381242 79.499999)
(xy 87.377 79.45693) (xy 87.377 79.456921) (xy 87.36431 79.328078) (xy 87.314162 79.162763) (xy 87.232727 79.010408)
(xy 87.123133 78.876867) (xy 87.089669 78.849404) (xy 85.800597 77.560332) (xy 85.773133 77.526867) (xy 85.639592 77.417273)
(xy 85.487237 77.335838) (xy 85.321922 77.28569) (xy 85.193079 77.273) (xy 85.15 77.268757) (xy 85.106921 77.273)
(xy 82.19976 77.273) (xy 82.174356 77.252152) (xy 82.065641 77.194042) (xy 81.947677 77.158259) (xy 81.825 77.146176)
(xy 79.675 77.146176) (xy 79.552323 77.158259) (xy 79.434359 77.194042) (xy 79.325644 77.252152) (xy 79.30024 77.273)
(xy 74.043079 77.273) (xy 74 77.268757) (xy 73.828077 77.28569) (xy 73.711014 77.321201) (xy 73.662763 77.335838)
(xy 73.510408 77.417273) (xy 73.484833 77.438262) (xy 73.429441 77.483721) (xy 73.427 77.485724) (xy 73.427 75.975)
(xy 78.786928 75.975) (xy 78.799188 76.099482) (xy 78.835498 76.21918) (xy 78.894463 76.329494) (xy 78.973815 76.426185)
(xy 79.070506 76.505537) (xy 79.18082 76.564502) (xy 79.300518 76.600812) (xy 79.425 76.613072) (xy 80.46425 76.61)
(xy 80.623 76.45125) (xy 80.623 75.477) (xy 80.877 75.477) (xy 80.877 76.45125) (xy 81.03575 76.61)
(xy 82.075 76.613072) (xy 82.199482 76.600812) (xy 82.31918 76.564502) (xy 82.429494 76.505537) (xy 82.526185 76.426185)
(xy 82.605537 76.329494) (xy 82.664502 76.21918) (xy 82.700812 76.099482) (xy 82.713072 75.975) (xy 82.71 75.63575)
(xy 82.55125 75.477) (xy 80.877 75.477) (xy 80.623 75.477) (xy 78.94875 75.477) (xy 78.79 75.63575)
(xy 78.786928 75.975) (xy 73.427 75.975) (xy 73.427 74.478824) (xy 73.5 74.478824) (xy 73.573905 74.471545)
(xy 73.64497 74.449988) (xy 73.710463 74.414981) (xy 73.736793 74.393373) (xy 73.769463 74.454494) (xy 73.848815 74.551185)
(xy 73.945506 74.630537) (xy 74.05582 74.689502) (xy 74.175518 74.725812) (xy 74.3 74.738072) (xy 74.76425 74.735)
(xy 74.923 74.57625) (xy 74.923 73.227) (xy 75.177 73.227) (xy 75.177 74.57625) (xy 75.33575 74.735)
(xy 75.8 74.738072) (xy 75.924482 74.725812) (xy 75.927158 74.725) (xy 78.786928 74.725) (xy 78.79 75.06425)
(xy 78.94875 75.223) (xy 80.623 75.223) (xy 80.623 74.24875) (xy 80.877 74.24875) (xy 80.877 75.223)
(xy 82.55125 75.223) (xy 82.71 75.06425) (xy 82.713072 74.725) (xy 82.700812 74.600518) (xy 82.664502 74.48082)
(xy 82.605537 74.370506) (xy 82.526185 74.273815) (xy 82.429494 74.194463) (xy 82.31918 74.135498) (xy 82.199482 74.099188)
(xy 82.075 74.086928) (xy 81.03575 74.09) (xy 80.877 74.24875) (xy 80.623 74.24875) (xy 80.46425 74.09)
(xy 79.425 74.086928) (xy 79.300518 74.099188) (xy 79.18082 74.135498) (xy 79.070506 74.194463) (xy 78.973815 74.273815)
(xy 78.894463 74.370506) (xy 78.835498 74.48082) (xy 78.799188 74.600518) (xy 78.786928 74.725) (xy 75.927158 74.725)
(xy 76.04418 74.689502) (xy 76.154494 74.630537) (xy 76.251185 74.551185) (xy 76.330537 74.454494) (xy 76.389502 74.34418)
(xy 76.425812 74.224482) (xy 76.438072 74.1) (xy 76.436352 73.7) (xy 76.436928 73.7) (xy 76.449188 73.824482)
(xy 76.485498 73.94418) (xy 76.544463 74.054494) (xy 76.623815 74.151185) (xy 76.720506 74.230537) (xy 76.83082 74.289502)
(xy 76.950518 74.325812) (xy 77.075 74.338072) (xy 77.27675 74.335) (xy 77.4355 74.17625) (xy 77.4355 73.127)
(xy 76.59875 73.127) (xy 76.44 73.28575) (xy 76.436928 73.7) (xy 76.436352 73.7) (xy 76.435 73.38575)
(xy 76.27625 73.227) (xy 75.177 73.227) (xy 74.923 73.227) (xy 74.903 73.227) (xy 74.903 72.973)
(xy 74.923 72.973) (xy 74.923 72.953) (xy 75.177 72.953) (xy 75.177 72.973) (xy 76.27625 72.973)
(xy 76.435 72.81425) (xy 76.437108 72.324221) (xy 76.44 72.71425) (xy 76.59875 72.873) (xy 77.4355 72.873)
(xy 77.4355 71.82375) (xy 77.6895 71.82375) (xy 77.6895 72.873) (xy 77.7095 72.873) (xy 77.7095 73.127)
(xy 77.6895 73.127) (xy 77.6895 74.17625) (xy 77.84825 74.335) (xy 78.05 74.338072) (xy 78.174482 74.325812)
(xy 78.29418 74.289502) (xy 78.404494 74.230537) (xy 78.501185 74.151185) (xy 78.580537 74.054494) (xy 78.639502 73.94418)
(xy 78.675812 73.824482) (xy 78.677808 73.804216) (xy 78.753524 73.896476) (xy 78.847866 73.973901) (xy 78.955501 74.031433)
(xy 79.072292 74.066861) (xy 79.19375 74.078824) (xy 79.68125 74.078824) (xy 79.802708 74.066861) (xy 79.919499 74.031433)
(xy 80.027134 73.973901) (xy 80.121476 73.896476) (xy 80.198901 73.802134) (xy 80.199203 73.801569) (xy 80.222764 73.814162)
(xy 80.388078 73.86431) (xy 80.56 73.881243) (xy 80.731922 73.86431) (xy 80.897236 73.814162) (xy 81.049592 73.732726)
(xy 81.149671 73.650594) (xy 81.369668 73.430597) (xy 81.403133 73.403133) (xy 81.512727 73.269592) (xy 81.594162 73.117237)
(xy 81.628566 73.003824) (xy 81.64431 72.951923) (xy 81.661243 72.78) (xy 81.657 72.736921) (xy 81.657 71.556743)
(xy 81.694981 71.510463) (xy 81.729988 71.44497) (xy 81.751545 71.373905) (xy 81.758824 71.3) (xy 81.758824 69.1)
(xy 81.751545 69.026095) (xy 81.729988 68.95503) (xy 81.694981 68.889537) (xy 81.647869 68.832131) (xy 81.590463 68.785019)
(xy 81.52497 68.750012) (xy 81.453905 68.728455) (xy 81.38 68.721176) (xy 80.331881 68.721176) (xy 80.314162 68.662763)
(xy 80.232727 68.510408) (xy 80.123133 68.376867) (xy 79.989591 68.267273) (xy 79.837236 68.185838) (xy 79.671921 68.13569)
(xy 79.5 68.118757) (xy 79.328078 68.13569) (xy 79.162763 68.185838) (xy 79.010408 68.267273) (xy 78.876867 68.376867)
(xy 78.767273 68.510409) (xy 78.685838 68.662764) (xy 78.63569 68.828079) (xy 78.623 68.956922) (xy 78.623 69.956916)
(xy 78.618757 70) (xy 78.623001 70.043085) (xy 78.623001 71.043079) (xy 78.635691 71.171922) (xy 78.685839 71.337237)
(xy 78.767274 71.489592) (xy 78.876868 71.623133) (xy 79.010409 71.732727) (xy 79.162764 71.814162) (xy 79.328079 71.86431)
(xy 79.5 71.881243) (xy 79.671922 71.86431) (xy 79.837237 71.814162) (xy 79.903001 71.779011) (xy 79.903001 71.963562)
(xy 79.802708 71.933139) (xy 79.68125 71.921176) (xy 79.19375 71.921176) (xy 79.072292 71.933139) (xy 78.955501 71.968567)
(xy 78.847866 72.026099) (xy 78.753524 72.103524) (xy 78.677808 72.195784) (xy 78.675812 72.175518) (xy 78.639502 72.05582)
(xy 78.580537 71.945506) (xy 78.501185 71.848815) (xy 78.404494 71.769463) (xy 78.29418 71.710498) (xy 78.174482 71.674188)
(xy 78.05 71.661928) (xy 77.84825 71.665) (xy 77.6895 71.82375) (xy 77.4355 71.82375) (xy 77.312542 71.700792)
(xy 77.350537 71.654494) (xy 77.409502 71.54418) (xy 77.445812 71.424482) (xy 77.458072 71.3) (xy 77.455 70.48575)
(xy 77.29625 70.327) (xy 76.347 70.327) (xy 76.347 70.347) (xy 76.093 70.347) (xy 76.093 70.327)
(xy 75.14375 70.327) (xy 74.985 70.48575) (xy 74.981928 71.3) (xy 74.994188 71.424482) (xy 75.006479 71.465)
(xy 74.922998 71.465) (xy 74.922998 71.623748) (xy 74.76425 71.465) (xy 74.3 71.461928) (xy 74.175518 71.474188)
(xy 74.05582 71.510498) (xy 73.945506 71.569463) (xy 73.848815 71.648815) (xy 73.769463 71.745506) (xy 73.736793 71.806627)
(xy 73.710463 71.785019) (xy 73.64497 71.750012) (xy 73.573905 71.728455) (xy 73.5 71.721176) (xy 72 71.721176)
(xy 71.926095 71.728455) (xy 71.85503 71.750012) (xy 71.789537 71.785019) (xy 71.732131 71.832131) (xy 71.685019 71.889537)
(xy 71.650012 71.95503) (xy 71.628455 72.026095) (xy 71.621176 72.1) (xy 71.621176 74.1) (xy 71.628455 74.173905)
(xy 71.650012 74.24497) (xy 71.685019 74.310463) (xy 71.732131 74.367869) (xy 71.789537 74.414981) (xy 71.85503 74.449988)
(xy 71.926095 74.471545) (xy 72 74.478824) (xy 72.073 74.478824) (xy 72.073001 78.021176) (xy 70.85 78.021176)
(xy 70.776095 78.028455) (xy 70.70503 78.050012) (xy 70.639537 78.085019) (xy 70.582131 78.132131) (xy 70.535019 78.189537)
(xy 70.500012 78.25503) (xy 70.478455 78.326095) (xy 70.471176 78.4) (xy 70.471176 78.822296) (xy 70.449999 78.82021)
(xy 70.42167 78.823) (xy 70.421664 78.823) (xy 70.336888 78.83135) (xy 70.228124 78.864343) (xy 70.127885 78.917921)
(xy 70.08198 78.955595) (xy 70.062035 78.971963) (xy 70.062033 78.971965) (xy 70.040026 78.990026) (xy 70.021965 79.012033)
(xy 69.574533 79.459466) (xy 69.552527 79.477526) (xy 69.534466 79.499533) (xy 69.534463 79.499536) (xy 69.518183 79.519374)
(xy 69.480422 79.565385) (xy 69.434769 79.650798) (xy 69.426844 79.665624) (xy 69.393849 79.774389) (xy 69.38271 79.8875)
(xy 69.385501 79.915841) (xy 69.3855 80.768432) (xy 69.321201 80.821201) (xy 69.246885 80.911756) (xy 69.191664 81.015068)
(xy 69.157658 81.127169) (xy 69.146176 81.24375) (xy 69.146176 81.75625) (xy 69.157658 81.872831) (xy 69.191664 81.984932)
(xy 69.246885 82.088244) (xy 69.321201 82.178799) (xy 69.411756 82.253115) (xy 69.515068 82.308336) (xy 69.627169 82.342342)
(xy 69.74375 82.353824) (xy 70.18125 82.353824) (xy 70.297831 82.342342) (xy 70.409932 82.308336) (xy 70.513244 82.253115)
(xy 70.523943 82.244334) (xy 70.569463 82.329494) (xy 70.648815 82.426185) (xy 70.745506 82.505537) (xy 70.85582 82.564502)
(xy 70.975518 82.600812) (xy 71.1 82.613072) (xy 71.25175 82.61) (xy 71.4105 82.45125) (xy 71.4105 81.627)
(xy 71.6645 81.627) (xy 71.6645 82.45125) (xy 71.82325 82.61) (xy 71.975 82.613072) (xy 72.099482 82.600812)
(xy 72.149959 82.5855) (xy 72.873 82.5855) (xy 72.873 81.79875) (xy 73.127 81.79875) (xy 73.127 82.5855)
(xy 73.95125 82.5855) (xy 74.11 82.42675) (xy 74.113072 82.275) (xy 74.100812 82.150518) (xy 74.064502 82.03082)
(xy 74.005537 81.920506) (xy 73.926185 81.823815) (xy 73.829494 81.744463) (xy 73.71918 81.685498) (xy 73.599482 81.649188)
(xy 73.475 81.636928) (xy 73.28575 81.64) (xy 73.127 81.79875) (xy 72.873 81.79875) (xy 72.71425 81.64)
(xy 72.525 81.636928) (xy 72.4669 81.64265) (xy 72.45125 81.627) (xy 71.6645 81.627) (xy 71.4105 81.627)
(xy 71.3905 81.627) (xy 71.3905 81.373) (xy 71.4105 81.373) (xy 71.4105 81.353) (xy 71.6645 81.353)
(xy 71.6645 81.373) (xy 72.45125 81.373) (xy 72.61 81.21425) (xy 72.613072 81.025) (xy 72.600812 80.900518)
(xy 72.564502 80.78082) (xy 72.563435 80.778824) (xy 74.65 80.778824) (xy 74.723905 80.771545) (xy 74.79497 80.749988)
(xy 74.860463 80.714981) (xy 74.917869 80.667869) (xy 74.964981 80.610463) (xy 74.999988 80.54497) (xy 75.021545 80.473905)
(xy 75.028824 80.4) (xy 75.028824 79.027) (xy 79.30024 79.027) (xy 79.325644 79.047848) (xy 79.434359 79.105958)
(xy 79.552323 79.141741) (xy 79.675 79.153824) (xy 81.008534 79.153824) (xy 81.260501 79.405791) (xy 81.260501 79.484193)
(xy 81.236756 79.496885) (xy 81.146201 79.571201) (xy 81.071885 79.661756) (xy 81.016664 79.765068) (xy 81 79.820001)
(xy 80.983336 79.765068) (xy 80.928115 79.661756) (xy 80.853799 79.571201) (xy 80.763244 79.496885) (xy 80.659932 79.441664)
(xy 80.547831 79.407658) (xy 80.43125 79.396176) (xy 79.99375 79.396176) (xy 79.877169 79.407658) (xy 79.765068 79.441664)
(xy 79.661756 79.496885) (xy 79.571201 79.571201) (xy 79.496885 79.661756) (xy 79.463596 79.724036) (xy 79.39669 79.730626)
(xy 79.29735 79.760761) (xy 79.205798 79.809696) (xy 79.125552 79.875552) (xy 79.109054 79.895655) (xy 78.867672 80.137038)
(xy 78.817111 80.147095) (xy 78.754571 80.173) (xy 76.015839 80.173) (xy 75.9875 80.170209) (xy 75.874388 80.181349)
(xy 75.765623 80.214343) (xy 75.739728 80.228184) (xy 75.665385 80.267921) (xy 75.577526 80.340026) (xy 75.559461 80.362038)
(xy 74.824534 81.096965) (xy 74.802527 81.115026) (xy 74.784466 81.137033) (xy 74.784463 81.137036) (xy 74.774079 81.149689)
(xy 74.730422 81.202885) (xy 74.724961 81.213101) (xy 74.661756 81.246885) (xy 74.571201 81.321201) (xy 74.496885 81.411756)
(xy 74.441664 81.515068) (xy 74.407658 81.627169) (xy 74.396176 81.74375) (xy 74.396176 82.25625) (xy 74.407658 82.372831)
(xy 74.441664 82.484932) (xy 74.496885 82.588244) (xy 74.571201 82.678799) (xy 74.661756 82.753115) (xy 74.765068 82.808336)
(xy 74.877169 82.842342) (xy 74.99375 82.853824) (xy 75.43125 82.853824) (xy 75.547831 82.842342) (xy 75.659932 82.808336)
(xy 75.763244 82.753115) (xy 75.853799 82.678799) (xy 75.928115 82.588244) (xy 75.983336 82.484932) (xy 76 82.429999)
(xy 76.016664 82.484932) (xy 76.071885 82.588244) (xy 76.146201 82.678799) (xy 76.236756 82.753115) (xy 76.340068 82.808336)
(xy 76.452169 82.842342) (xy 76.56875 82.853824) (xy 77.00625 82.853824) (xy 77.122831 82.842342) (xy 77.234932 82.808336)
(xy 77.338244 82.753115) (xy 77.428799 82.678799) (xy 77.503115 82.588244) (xy 77.509125 82.577) (xy 77.990875 82.577)
(xy 77.996885 82.588244) (xy 78.071201 82.678799) (xy 78.1355 82.731568) (xy 78.135501 83.268432) (xy 78.071201 83.321201)
(xy 77.996885 83.411756) (xy 77.990875 83.423) (xy 77.628331 83.423) (xy 77.6 83.42021) (xy 77.571669 83.423)
(xy 77.571664 83.423) (xy 77.544886 83.425637) (xy 77.486888 83.431349) (xy 77.422782 83.450796) (xy 77.378124 83.464343)
(xy 77.277885 83.517921) (xy 77.190026 83.590026) (xy 77.171961 83.612038) (xy 76.574537 84.209462) (xy 76.56749 84.203381)
(xy 76.458666 84.14171) (xy 76.339902 84.102454) (xy 76.23175 84.09) (xy 76.073 84.24875) (xy 76.073 84.706481)
(xy 76.071176 84.725) (xy 76.071176 85.375) (xy 76.073 85.393519) (xy 76.073 85.85125) (xy 76.23175 86.01)
(xy 76.339902 85.997546) (xy 76.458666 85.95829) (xy 76.56749 85.896619) (xy 76.662192 85.814903) (xy 76.709843 85.753824)
(xy 76.85 85.753824) (xy 76.923905 85.746545) (xy 76.99497 85.724988) (xy 77.060463 85.689981) (xy 77.078717 85.675)
(xy 81.036928 85.675) (xy 81.049188 85.799482) (xy 81.085498 85.91918) (xy 81.144463 86.029494) (xy 81.223815 86.126185)
(xy 81.320506 86.205537) (xy 81.43082 86.264502) (xy 81.550518 86.300812) (xy 81.675 86.313072) (xy 82.71425 86.31)
(xy 82.873 86.15125) (xy 82.873 85.177) (xy 83.127 85.177) (xy 83.127 86.15125) (xy 83.28575 86.31)
(xy 84.325 86.313072) (xy 84.449482 86.300812) (xy 84.56918 86.264502) (xy 84.679494 86.205537) (xy 84.776185 86.126185)
(xy 84.855537 86.029494) (xy 84.914502 85.91918) (xy 84.950812 85.799482) (xy 84.963072 85.675) (xy 84.96 85.33575)
(xy 84.80125 85.177) (xy 83.127 85.177) (xy 82.873 85.177) (xy 81.19875 85.177) (xy 81.04 85.33575)
(xy 81.036928 85.675) (xy 77.078717 85.675) (xy 77.117869 85.642869) (xy 77.164981 85.585463) (xy 77.199988 85.51997)
(xy 77.221545 85.448905) (xy 77.228824 85.375) (xy 77.228824 85.155217) (xy 77.272114 85.132078) (xy 77.337964 85.078037)
(xy 77.839001 84.577) (xy 77.990875 84.577) (xy 77.996885 84.588244) (xy 78.071201 84.678799) (xy 78.16086 84.752379)
(xy 78.073815 84.823815) (xy 77.994463 84.920506) (xy 77.935498 85.03082) (xy 77.899188 85.150518) (xy 77.886928 85.275)
(xy 77.89 85.42675) (xy 78.04875 85.5855) (xy 78.873 85.5855) (xy 78.873 85.5655) (xy 79.127 85.5655)
(xy 79.127 85.5855) (xy 79.95125 85.5855) (xy 80.11 85.42675) (xy 80.113072 85.275) (xy 80.100812 85.150518)
(xy 80.068326 85.043424) (xy 80.1605 84.95125) (xy 80.1605 84.127) (xy 80.1405 84.127) (xy 80.1405 83.873)
(xy 80.1605 83.873) (xy 80.1605 83.04875) (xy 80.11175 83) (xy 80.1605 82.95125) (xy 80.1605 82.127)
(xy 80.1405 82.127) (xy 80.1405 81.873) (xy 80.1605 81.873) (xy 80.1605 81.853) (xy 80.4145 81.853)
(xy 80.4145 81.873) (xy 80.4345 81.873) (xy 80.4345 82.127) (xy 80.4145 82.127) (xy 80.4145 82.95125)
(xy 80.46325 83) (xy 80.4145 83.04875) (xy 80.4145 83.873) (xy 80.4345 83.873) (xy 80.4345 84.127)
(xy 80.4145 84.127) (xy 80.4145 84.95125) (xy 80.57325 85.11) (xy 80.725 85.113072) (xy 80.849482 85.100812)
(xy 80.96918 85.064502) (xy 81.079494 85.005537) (xy 81.176185 84.926185) (xy 81.187792 84.912042) (xy 81.19875 84.923)
(xy 82.873 84.923) (xy 82.873 83.94875) (xy 83.127 83.94875) (xy 83.127 84.923) (xy 84.80125 84.923)
(xy 84.96 84.76425) (xy 84.963072 84.425) (xy 84.950812 84.300518) (xy 84.914502 84.18082) (xy 84.855537 84.070506)
(xy 84.776185 83.973815) (xy 84.679494 83.894463) (xy 84.56918 83.835498) (xy 84.449482 83.799188) (xy 84.325 83.786928)
(xy 83.28575 83.79) (xy 83.127 83.94875) (xy 82.873 83.94875) (xy 82.71425 83.79) (xy 81.675 83.786928)
(xy 81.550518 83.799188) (xy 81.43082 83.835498) (xy 81.36 83.873353) (xy 81.36 83.872998) (xy 81.201252 83.872998)
(xy 81.36 83.71425) (xy 81.363072 83.525) (xy 81.350812 83.400518) (xy 81.314502 83.28082) (xy 81.255537 83.170506)
(xy 81.176185 83.073815) (xy 81.086241 83) (xy 81.176185 82.926185) (xy 81.255537 82.829494) (xy 81.30686 82.733476)
(xy 81.308259 82.747677) (xy 81.344042 82.865641) (xy 81.402152 82.974356) (xy 81.480354 83.069646) (xy 81.575644 83.147848)
(xy 81.684359 83.205958) (xy 81.802323 83.241741) (xy 81.925 83.253824) (xy 84.075 83.253824) (xy 84.197677 83.241741)
(xy 84.315641 83.205958) (xy 84.424356 83.147848) (xy 84.519646 83.069646) (xy 84.597848 82.974356) (xy 84.655958 82.865641)
(xy 84.691741 82.747677) (xy 84.703824 82.625) (xy 84.703824 81.875) (xy 84.691741 81.752323) (xy 84.655958 81.634359)
(xy 84.597848 81.525644) (xy 84.519646 81.430354) (xy 84.424356 81.352152) (xy 84.315641 81.294042) (xy 84.197677 81.258259)
(xy 84.076624 81.246336) (xy 84.102905 81.182889) (xy 84.127 81.061754) (xy 84.127 80.938246) (xy 84.102905 80.817111)
(xy 84.05564 80.703004) (xy 83.987023 80.600311) (xy 83.899689 80.512977) (xy 83.796996 80.44436) (xy 83.682889 80.397095)
(xy 83.561754 80.373) (xy 83.438246 80.373) (xy 83.317111 80.397095) (xy 83.203004 80.44436) (xy 83.100311 80.512977)
(xy 83.012977 80.600311) (xy 82.94436 80.703004) (xy 82.897095 80.817111) (xy 82.873 80.938246) (xy 82.873 81.061754)
(xy 82.897095 81.182889) (xy 82.92331 81.246176) (xy 81.925 81.246176) (xy 81.802323 81.258259) (xy 81.684359 81.294042)
(xy 81.575644 81.352152) (xy 81.480354 81.430354) (xy 81.402152 81.525644) (xy 81.361837 81.601067) (xy 81.363072 81.525)
(xy 81.350812 81.400518) (xy 81.314502 81.28082) (xy 81.255537 81.170506) (xy 81.176185 81.073815) (xy 81.079494 80.994463)
(xy 80.96918 80.935498) (xy 80.872396 80.906139) (xy 80.928115 80.838244) (xy 80.983336 80.734932) (xy 81 80.679999)
(xy 81.016664 80.734932) (xy 81.071885 80.838244) (xy 81.146201 80.928799) (xy 81.236756 81.003115) (xy 81.340068 81.058336)
(xy 81.452169 81.092342) (xy 81.56875 81.103824) (xy 82.00625 81.103824) (xy 82.122831 81.092342) (xy 82.234932 81.058336)
(xy 82.338244 81.003115) (xy 82.428799 80.928799) (xy 82.503115 80.838244) (xy 82.558336 80.734932) (xy 82.592342 80.622831)
(xy 82.603824 80.50625) (xy 82.603824 79.99375) (xy 82.592342 79.877169) (xy 82.558336 79.765068) (xy 82.503115 79.661756)
(xy 82.428799 79.571201) (xy 82.338244 79.496885) (xy 82.3145 79.484194) (xy 82.3145 79.213381) (xy 82.317049 79.1875)
(xy 82.306874 79.08419) (xy 82.296335 79.049447) (xy 82.289525 79.027) (xy 84.786735 79.027) (xy 85.623 79.863265)
(xy 85.623001 85.886733) (xy 84.136735 87.373) (xy 81.080423 87.373) (xy 80.539726 86.832304) (xy 80.518527 86.806473)
(xy 80.415441 86.721872) (xy 80.29783 86.659008) (xy 80.170215 86.620296) (xy 80.070752 86.6105) (xy 80.070745 86.6105)
(xy 80.0375 86.607226) (xy 80.004255 86.6105) (xy 79.914835 86.6105) (xy 79.926185 86.601185) (xy 80.005537 86.504494)
(xy 80.064502 86.39418) (xy 80.100812 86.274482) (xy 80.113072 86.15) (xy 80.11 85.99825) (xy 79.95125 85.8395)
(xy 79.127 85.8395) (xy 79.127 85.8595) (xy 78.873 85.8595) (xy 78.873 85.8395) (xy 78.04875 85.8395)
(xy 77.89 85.99825) (xy 77.886928 86.15) (xy 77.899188 86.274482) (xy 77.935498 86.39418) (xy 77.950903 86.423)
(xy 77.169505 86.423) (xy 77.164981 86.414537) (xy 77.117869 86.357131) (xy 77.060463 86.310019) (xy 76.99497 86.275012)
(xy 76.923905 86.253455) (xy 76.85 86.246176) (xy 76.45 86.246176) (xy 76.376095 86.253455) (xy 76.30503 86.275012)
(xy 76.239537 86.310019) (xy 76.182131 86.357131) (xy 76.135019 86.414537) (xy 76.100012 86.48003) (xy 76.078455 86.551095)
(xy 76.071176 86.625) (xy 76.071176 87.275) (xy 76.078455 87.348905) (xy 76.100012 87.41997) (xy 76.135019 87.485463)
(xy 76.182131 87.542869) (xy 76.239537 87.589981) (xy 76.30503 87.624988) (xy 76.376095 87.646545) (xy 76.45 87.653824)
(xy 76.85 87.653824) (xy 76.923905 87.646545) (xy 76.99497 87.624988) (xy 77.060463 87.589981) (xy 77.117869 87.542869)
(xy 77.164981 87.485463) (xy 77.169505 87.477) (xy 78.146176 87.477) (xy 78.146176 87.50625) (xy 78.157658 87.622831)
(xy 78.191664 87.734932) (xy 78.246885 87.838244) (xy 78.321201 87.928799) (xy 78.411756 88.003115) (xy 78.515068 88.058336)
(xy 78.627169 88.092342) (xy 78.74375 88.103824) (xy 79.25625 88.103824) (xy 79.372831 88.092342) (xy 79.484932 88.058336)
Move vias to better locations: These vias have proven unfortunately placed for hand soldering
2020-02-05 22:12:31 +01:00
(xy 79.588244 88.003115) (xy 79.635297 87.9645) (xy 79.757078 87.9645) (xy 80.123001 88.330424) (xy 80.123 90.885977)
(xy 80.067105 90.897095) (xy 79.952998 90.94436) (xy 79.850305 91.012977) (xy 79.762971 91.100311) (xy 79.694354 91.203004)
(xy 79.647089 91.317111) (xy 79.622994 91.438246) (xy 79.622994 91.561754) (xy 79.647089 91.682889) (xy 79.694354 91.796996)
(xy 79.762971 91.899689) (xy 79.850305 91.987023) (xy 79.952998 92.05564) (xy 80.067105 92.102905) (xy 80.123001 92.114023)
(xy 80.123 96.5105) (xy 79.515806 96.5105) (xy 79.503115 96.486756) (xy 79.494334 96.476057) (xy 79.579494 96.430537)
(xy 79.676185 96.351185) (xy 79.755537 96.254494) (xy 79.814502 96.14418) (xy 79.850812 96.024482) (xy 79.863072 95.9)
(xy 79.86 95.74825) (xy 79.70125 95.5895) (xy 78.877 95.5895) (xy 78.877 95.6095) (xy 78.623 95.6095)
(xy 78.623 95.5895) (xy 78.603 95.5895) (xy 78.603 95.3355) (xy 78.623 95.3355) (xy 78.623 95.3155)
(xy 78.877 95.3155) (xy 78.877 95.3355) (xy 79.70125 95.3355) (xy 79.86 95.17675) (xy 79.863072 95.025)
(xy 79.850812 94.900518) (xy 79.814502 94.78082) (xy 79.755537 94.670506) (xy 79.676185 94.573815) (xy 79.579494 94.494463)
(xy 79.46918 94.435498) (xy 79.349482 94.399188) (xy 79.225 94.386928) (xy 79.03575 94.39) (xy 79.012596 94.413154)
(xy 79.019374 94.39081) (xy 79.020932 94.374988) (xy 79.029549 94.287501) (xy 79.027 94.26162) (xy 79.027 91.275877)
(xy 79.029549 91.249999) (xy 79.026823 91.222325) (xy 79.019374 91.14669) (xy 78.989239 91.04735) (xy 78.940304 90.955798)
(xy 78.874448 90.875552) (xy 78.854339 90.859049) (xy 77.390955 89.395666) (xy 77.374448 89.375552) (xy 77.294202 89.309696)
(xy 77.20265 89.260761) (xy 77.10331 89.230626) (xy 77.025881 89.223) (xy 77 89.220451) (xy 76.974119 89.223)
(xy 73.71829 89.223) (xy 71.736942 87.241652) (xy 73.489594 87.241652) (xy 73.489594 87.36516) (xy 73.513689 87.486295)
(xy 73.560954 87.600402) (xy 73.629571 87.703095) (xy 73.716905 87.790429) (xy 73.819598 87.859046) (xy 73.933705 87.906311)
(xy 74.05484 87.930406) (xy 74.178348 87.930406) (xy 74.299483 87.906311) (xy 74.362023 87.880406) (xy 75.031742 87.880406)
(xy 75.116518 87.872056) (xy 75.225282 87.839063) (xy 75.325521 87.785485) (xy 75.41338 87.71338) (xy 75.462257 87.653824)
(xy 75.55 87.653824) (xy 75.623905 87.646545) (xy 75.69497 87.624988) (xy 75.760463 87.589981) (xy 75.817869 87.542869)
(xy 75.864981 87.485463) (xy 75.899988 87.41997) (xy 75.921545 87.348905) (xy 75.928824 87.275) (xy 75.928824 86.625)
(xy 75.921545 86.551095) (xy 75.899988 86.48003) (xy 75.864981 86.414537) (xy 75.817869 86.357131) (xy 75.760463 86.310019)
(xy 75.69497 86.275012) (xy 75.623905 86.253455) (xy 75.55 86.246176) (xy 75.15 86.246176) (xy 75.076095 86.253455)
(xy 75.00503 86.275012) (xy 74.939537 86.310019) (xy 74.882131 86.357131) (xy 74.835019 86.414537) (xy 74.800012 86.48003)
(xy 74.778455 86.551095) (xy 74.771176 86.625) (xy 74.771176 86.726406) (xy 74.362023 86.726406) (xy 74.299483 86.700501)
(xy 74.178348 86.676406) (xy 74.05484 86.676406) (xy 73.933705 86.700501) (xy 73.819598 86.747766) (xy 73.716905 86.816383)
(xy 73.629571 86.903717) (xy 73.560954 87.00641) (xy 73.513689 87.120517) (xy 73.489594 87.241652) (xy 71.736942 87.241652)
(xy 71.24197 86.746681) (xy 71.267 86.620849) (xy 71.267 86.379151) (xy 71.219847 86.142097) (xy 71.127353 85.918798)
(xy 70.993073 85.717833) (xy 70.822167 85.546927) (xy 70.621202 85.412647) (xy 70.397903 85.320153) (xy 70.160849 85.273)
(xy 69.919151 85.273) (xy 69.682097 85.320153) (xy 69.627894 85.342605) (xy 68.930955 84.645666) (xy 68.914448 84.625552)
(xy 68.834202 84.559696) (xy 68.74265 84.510761) (xy 68.64331 84.480626) (xy 68.565881 84.473) (xy 68.54 84.470451)
(xy 68.514119 84.473) (xy 66.275881 84.473) (xy 66.25 84.470451) (xy 66.224119 84.473) (xy 66.14669 84.480626)
(xy 66.04735 84.510761) (xy 65.955798 84.559696) (xy 65.875552 84.625552) (xy 65.859053 84.645656) (xy 64.145666 86.359045)
(xy 64.125552 86.375552) (xy 64.089933 86.418953) (xy 64.015068 86.441664) (xy 63.911756 86.496885) (xy 63.821201 86.571201)
(xy 63.75 86.65796) (xy 63.678799 86.571201) (xy 63.588244 86.496885) (xy 63.484932 86.441664) (xy 63.372831 86.407658)
(xy 63.25625 86.396176) (xy 63.136613 86.396176) (xy 65.928966 83.603824) (xy 66.25625 83.603824) (xy 66.372831 83.592342)
(xy 66.484932 83.558336) (xy 66.588244 83.503115) (xy 66.678799 83.428799) (xy 66.753115 83.338244) (xy 66.808336 83.234932)
(xy 66.8341 83.15) (xy 71.886928 83.15) (xy 71.899188 83.274482) (xy 71.935498 83.39418) (xy 71.994463 83.504494)
(xy 72.073815 83.601185) (xy 72.170506 83.680537) (xy 72.255666 83.726057) (xy 72.246885 83.736756) (xy 72.191664 83.840068)
(xy 72.157658 83.952169) (xy 72.146176 84.06875) (xy 72.146176 84.50625) (xy 72.157658 84.622831) (xy 72.191664 84.734932)
(xy 72.246885 84.838244) (xy 72.321201 84.928799) (xy 72.411756 85.003115) (xy 72.473 85.035851) (xy 72.473001 85.800999)
(xy 72.425954 85.87141) (xy 72.378689 85.985517) (xy 72.354594 86.106652) (xy 72.354594 86.23016) (xy 72.378689 86.351295)
(xy 72.425954 86.465402) (xy 72.494571 86.568095) (xy 72.581905 86.655429) (xy 72.684598 86.724046) (xy 72.798705 86.771311)
(xy 72.91984 86.795406) (xy 73.043348 86.795406) (xy 73.164483 86.771311) (xy 73.27859 86.724046) (xy 73.381283 86.655429)
(xy 73.468617 86.568095) (xy 73.537234 86.465402) (xy 73.584499 86.351295) (xy 73.608594 86.23016) (xy 73.608594 86.106652)
(xy 73.584499 85.985517) (xy 73.537234 85.87141) (xy 73.527 85.856094) (xy 73.527 85.227) (xy 74.771176 85.227)
(xy 74.771176 85.375) (xy 74.778455 85.448905) (xy 74.800012 85.51997) (xy 74.835019 85.585463) (xy 74.882131 85.642869)
(xy 74.939537 85.689981) (xy 75.00503 85.724988) (xy 75.076095 85.746545) (xy 75.15 85.753824) (xy 75.290157 85.753824)
(xy 75.337808 85.814903) (xy 75.43251 85.896619) (xy 75.541334 85.95829) (xy 75.660098 85.997546) (xy 75.76825 86.01)
(xy 75.927 85.85125) (xy 75.927 85.393519) (xy 75.928824 85.375) (xy 75.928824 84.725) (xy 75.927 84.706481)
(xy 75.927 84.24875) (xy 75.76825 84.09) (xy 75.660098 84.102454) (xy 75.541334 84.14171) (xy 75.43251 84.203381)
(xy 75.424132 84.210611) (xy 75.372115 84.167921) (xy 75.271876 84.114343) (xy 75.163112 84.08135) (xy 75.078336 84.073)
(xy 73.853824 84.073) (xy 73.853824 84.06875) (xy 73.842342 83.952169) (xy 73.808336 83.840068) (xy 73.753115 83.736756)
(xy 73.744334 83.726057) (xy 73.829494 83.680537) (xy 73.926185 83.601185) (xy 74.005537 83.504494) (xy 74.064502 83.39418)
(xy 74.100812 83.274482) (xy 74.113072 83.15) (xy 74.11 82.99825) (xy 73.95125 82.8395) (xy 73.127 82.8395)
(xy 73.127 82.8595) (xy 72.873 82.8595) (xy 72.873 82.8395) (xy 72.04875 82.8395) (xy 71.89 82.99825)
(xy 71.886928 83.15) (xy 66.8341 83.15) (xy 66.842342 83.122831) (xy 66.853824 83.00625) (xy 66.853824 82.56875)
(xy 66.842342 82.452169) (xy 66.808336 82.340068) (xy 66.753115 82.236756) (xy 66.678799 82.146201) (xy 66.588244 82.071885)
(xy 66.484932 82.016664) (xy 66.429999 82) (xy 66.484932 81.983336) (xy 66.588244 81.928115) (xy 66.678799 81.853799)
(xy 66.753115 81.763244) (xy 66.808336 81.659932) (xy 66.842342 81.547831) (xy 66.853824 81.43125) (xy 66.853824 80.99375)
(xy 66.842342 80.877169) (xy 66.808336 80.765068) (xy 66.753115 80.661756) (xy 66.678799 80.571201) (xy 66.588244 80.496885)
(xy 66.527 80.46415) (xy 66.527 80.320606) (xy 66.59497 80.299988) (xy 66.660463 80.264981) (xy 66.717869 80.217869)
(xy 66.764981 80.160463) (xy 66.799988 80.09497) (xy 66.821545 80.023905) (xy 66.828824 79.95) (xy 66.911928 79.95)
(xy 66.924188 80.074482) (xy 66.960498 80.19418) (xy 67.019463 80.304494) (xy 67.098815 80.401185) (xy 67.195506 80.480537)
(xy 67.30582 80.539502) (xy 67.425518 80.575812) (xy 67.55 80.588072) (xy 67.66425 80.585) (xy 67.823 80.42625)
(xy 67.823 79.627) (xy 68.077 79.627) (xy 68.077 80.42625) (xy 68.23575 80.585) (xy 68.35 80.588072)
(xy 68.474482 80.575812) (xy 68.59418 80.539502) (xy 68.704494 80.480537) (xy 68.801185 80.401185) (xy 68.880537 80.304494)
(xy 68.939502 80.19418) (xy 68.975812 80.074482) (xy 68.988072 79.95) (xy 68.985 79.78575) (xy 68.82625 79.627)
(xy 68.077 79.627) (xy 67.823 79.627) (xy 67.07375 79.627) (xy 66.915 79.78575) (xy 66.911928 79.95)
(xy 66.828824 79.95) (xy 66.828824 79.05) (xy 66.911928 79.05) (xy 66.915 79.21425) (xy 67.07375 79.373)
(xy 67.823 79.373) (xy 67.823 78.57375) (xy 68.077 78.57375) (xy 68.077 79.373) (xy 68.82625 79.373)
(xy 68.985 79.21425) (xy 68.988072 79.05) (xy 68.975812 78.925518) (xy 68.939502 78.80582) (xy 68.880537 78.695506)
(xy 68.801185 78.598815) (xy 68.704494 78.519463) (xy 68.59418 78.460498) (xy 68.474482 78.424188) (xy 68.35 78.411928)
(xy 68.23575 78.415) (xy 68.077 78.57375) (xy 67.823 78.57375) (xy 67.66425 78.415) (xy 67.55 78.411928)
(xy 67.425518 78.424188) (xy 67.30582 78.460498) (xy 67.195506 78.519463) (xy 67.098815 78.598815) (xy 67.019463 78.695506)
(xy 66.960498 78.80582) (xy 66.924188 78.925518) (xy 66.911928 79.05) (xy 66.828824 79.05) (xy 66.821545 78.976095)
(xy 66.799988 78.90503) (xy 66.764981 78.839537) (xy 66.717869 78.782131) (xy 66.660463 78.735019) (xy 66.59497 78.700012)
(xy 66.523905 78.678455) (xy 66.45 78.671176) (xy 65.65 78.671176) (xy 65.576095 78.678455) (xy 65.50503 78.700012)
(xy 65.439537 78.735019) (xy 65.382131 78.782131) (xy 65.335019 78.839537) (xy 65.300012 78.90503) (xy 65.278455 78.976095)
(xy 65.271176 79.05) (xy 65.271176 79.95) (xy 65.278455 80.023905) (xy 65.300012 80.09497) (xy 65.335019 80.160463)
(xy 65.382131 80.217869) (xy 65.439537 80.264981) (xy 65.473001 80.282868) (xy 65.473 80.464149) (xy 65.411756 80.496885)
(xy 65.321201 80.571201) (xy 65.246885 80.661756) (xy 65.191664 80.765068) (xy 65.157658 80.877169) (xy 65.146176 80.99375)
(xy 65.146176 81.43125) (xy 65.157658 81.547831) (xy 65.191664 81.659932) (xy 65.246885 81.763244) (xy 65.321201 81.853799)
(xy 65.411756 81.928115) (xy 65.515068 81.983336) (xy 65.570001 82) (xy 65.515068 82.016664) (xy 65.411756 82.071885)
(xy 65.321201 82.146201) (xy 65.246885 82.236756) (xy 65.191664 82.340068) (xy 65.157658 82.452169) (xy 65.146176 82.56875)
(xy 65.146176 82.896034) (xy 61.387 86.655211) (xy 61.387 86.282328) (xy 61.389549 86.256447) (xy 61.380353 86.163072)
(xy 61.379374 86.153137) (xy 61.349239 86.053797) (xy 61.300304 85.962245) (xy 61.234448 85.881999) (xy 61.214339 85.865496)
(xy 57.744508 82.395666) (xy 57.728001 82.375552) (xy 57.647755 82.309696) (xy 57.556203 82.260761) (xy 57.456863 82.230626)
(xy 57.379434 82.223) (xy 57.353553 82.220451) (xy 57.327672 82.223) (xy 56.089859 82.223) (xy 56.046996 82.19436)
(xy 55.932889 82.147095) (xy 55.870587 82.134703) (xy 56.27829 81.727) (xy 57.030141 81.727) (xy 57.073004 81.75564)
(xy 57.187111 81.802905) (xy 57.308246 81.827) (xy 57.431754 81.827) (xy 57.552889 81.802905) (xy 57.666996 81.75564)
(xy 57.769689 81.687023) (xy 57.857023 81.599689) (xy 57.91361 81.515) (xy 60.486928 81.515) (xy 60.499188 81.639482)
(xy 60.535498 81.75918) (xy 60.594463 81.869494) (xy 60.673815 81.966185) (xy 60.770506 82.045537) (xy 60.88082 82.104502)
(xy 61.000518 82.140812) (xy 61.125 82.153072) (xy 61.86425 82.15) (xy 62.023 81.99125) (xy 62.023 81.342)
(xy 62.277 81.342) (xy 62.277 81.99125) (xy 62.43575 82.15) (xy 63.175 82.153072) (xy 63.299482 82.140812)
(xy 63.41918 82.104502) (xy 63.529494 82.045537) (xy 63.626185 81.966185) (xy 63.705537 81.869494) (xy 63.764502 81.75918)
(xy 63.800812 81.639482) (xy 63.813072 81.515) (xy 63.81 81.50075) (xy 63.65125 81.342) (xy 62.277 81.342)
(xy 62.023 81.342) (xy 60.64875 81.342) (xy 60.49 81.50075) (xy 60.486928 81.515) (xy 57.91361 81.515)
(xy 57.92564 81.496996) (xy 57.972905 81.382889) (xy 57.997 81.261754) (xy 57.997 81.138246) (xy 57.972905 81.017111)
(xy 57.92564 80.903004) (xy 57.857023 80.800311) (xy 57.769689 80.712977) (xy 57.666996 80.64436) (xy 57.552889 80.597095)
(xy 57.431754 80.573) (xy 57.308246 80.573) (xy 57.187111 80.597095) (xy 57.073004 80.64436) (xy 57.030141 80.673)
(xy 56.57229 80.673) (xy 56.632328 80.612962) (xy 56.682889 80.602905) (xy 56.796996 80.55564) (xy 56.899689 80.487023)
(xy 56.987023 80.399689) (xy 57.05564 80.296996) (xy 57.102905 80.182889) (xy 57.127 80.061754) (xy 57.127 79.938246)
(xy 57.102905 79.817111) (xy 57.05564 79.703004) (xy 56.987023 79.600311) (xy 56.899689 79.512977) (xy 56.796996 79.44436)
(xy 56.682889 79.397095) (xy 56.561754 79.373) (xy 56.438246 79.373) (xy 56.317111 79.397095) (xy 56.203004 79.44436)
(xy 56.100311 79.512977) (xy 56.012977 79.600311) (xy 55.94436 79.703004) (xy 55.897095 79.817111) (xy 55.887038 79.867672)
(xy 55.527 80.22771) (xy 55.527 80.218246) (xy 55.502905 80.097111) (xy 55.45564 79.983004) (xy 55.387023 79.880311)
(xy 55.299689 79.792977) (xy 55.196996 79.72436) (xy 55.082889 79.677095) (xy 54.961754 79.653) (xy 54.838246 79.653)
(xy 54.717111 79.677095) (xy 54.603004 79.72436) (xy 54.500311 79.792977) (xy 54.47529 79.817998) (xy 54.351252 79.817998)
(xy 54.51 79.65925) (xy 54.513072 79.645) (xy 54.500812 79.520518) (xy 54.464502 79.40082) (xy 54.405537 79.290506)
(xy 54.332902 79.202) (xy 54.629119 79.202) (xy 54.655 79.204549) (xy 54.680881 79.202) (xy 54.75831 79.194374)
(xy 54.85765 79.164239) (xy 54.949202 79.115304) (xy 55.029448 79.049448) (xy 55.045955 79.029334) (xy 57.473 76.60229)
(xy 57.473 77.334119) (xy 57.470451 77.36) (xy 57.476092 77.417273) (xy 57.480626 77.463309) (xy 57.510761 77.562649)
(xy 57.559696 77.654202) (xy 57.625552 77.734448) (xy 57.645666 77.750955) (xy 58.924053 79.029344) (xy 58.940552 79.049448)
(xy 59.020798 79.115304) (xy 59.11235 79.164239) (xy 59.20301 79.191741) (xy 59.21169 79.194374) (xy 59.315 79.204549)
(xy 59.340881 79.202) (xy 60.9048 79.202) (xy 60.981201 79.264701) (xy 61.065949 79.31) (xy 60.981201 79.355299)
(xy 60.9048 79.418) (xy 60.102444 79.418) (xy 60.096996 79.41436) (xy 59.982889 79.367095) (xy 59.861754 79.343)
(xy 59.738246 79.343) (xy 59.617111 79.367095) (xy 59.503004 79.41436) (xy 59.400311 79.482977) (xy 59.312977 79.570311)
(xy 59.24436 79.673004) (xy 59.197095 79.787111) (xy 59.173 79.908246) (xy 59.173 80.031754) (xy 59.197095 80.152889)
(xy 59.24436 80.266996) (xy 59.312977 80.369689) (xy 59.400311 80.457023) (xy 59.503004 80.52564) (xy 59.617111 80.572905)
(xy 59.738246 80.597) (xy 59.861754 80.597) (xy 59.982889 80.572905) (xy 60.096996 80.52564) (xy 60.177274 80.472)
(xy 60.667098 80.472) (xy 60.594463 80.560506) (xy 60.535498 80.67082) (xy 60.499188 80.790518) (xy 60.486928 80.915)
(xy 60.49 80.92925) (xy 60.64875 81.088) (xy 62.023 81.088) (xy 62.023 81.068) (xy 62.277 81.068)
(xy 62.277 81.088) (xy 63.65125 81.088) (xy 63.81 80.92925) (xy 63.813072 80.915) (xy 63.800812 80.790518)
(xy 63.764502 80.67082) (xy 63.705537 80.560506) (xy 63.626185 80.463815) (xy 63.529494 80.384463) (xy 63.480902 80.35849)
(xy 63.51357 80.297372) (xy 63.543663 80.198168) (xy 63.553824 80.095) (xy 63.553824 79.795) (xy 63.543663 79.691832)
(xy 63.51357 79.592628) (xy 63.464701 79.501201) (xy 63.398935 79.421065) (xy 63.318799 79.355299) (xy 63.234051 79.31)
(xy 63.318799 79.264701) (xy 63.398935 79.198935) (xy 63.464701 79.118799) (xy 63.51357 79.027372) (xy 63.543663 78.928168)
(xy 63.553824 78.825) (xy 63.553824 78.525) (xy 63.543663 78.421832) (xy 63.51357 78.322628) (xy 63.464701 78.231201)
(xy 63.398935 78.151065) (xy 63.318799 78.085299) (xy 63.234051 78.04) (xy 63.318799 77.994701) (xy 63.3952 77.932)
(xy 63.795272 77.932) (xy 63.850311 77.987039) (xy 63.953004 78.055656) (xy 64.067111 78.102921) (xy 64.188246 78.127016)
(xy 64.311754 78.127016) (xy 64.432889 78.102921) (xy 64.546996 78.055656) (xy 64.649689 77.987039) (xy 64.737023 77.899705)
(xy 64.80564 77.797012) (xy 64.852905 77.682905) (xy 64.877 77.56177) (xy 64.877 77.438262) (xy 64.852905 77.317127)
(xy 64.80564 77.20302) (xy 64.737023 77.100327) (xy 64.649689 77.012993) (xy 64.546996 76.944376) (xy 64.432889 76.897111)
(xy 64.311754 76.873016) (xy 64.188246 76.873016) (xy 64.169043 76.876836) (xy 64.154984 76.875451) (xy 64.129103 76.878)
(xy 63.3952 76.878) (xy 63.318799 76.815299) (xy 63.234051 76.77) (xy 63.318799 76.724701) (xy 63.398935 76.658935)
(xy 63.464701 76.578799) (xy 63.51357 76.487372) (xy 63.543663 76.388168) (xy 63.553824 76.285) (xy 63.553824 75.985)
(xy 63.543663 75.881832) (xy 63.51357 75.782628) (xy 63.464701 75.691201) (xy 63.398935 75.611065) (xy 63.318799 75.545299)
(xy 63.234051 75.5) (xy 63.318799 75.454701) (xy 63.3952 75.392) (xy 63.7925 75.392) (xy 63.867111 75.422905)
(xy 63.988246 75.447) (xy 64.111754 75.447) (xy 64.232889 75.422905) (xy 64.346996 75.37564) (xy 64.449689 75.307023)
(xy 64.537023 75.219689) (xy 64.60564 75.116996) (xy 64.652905 75.002889) (xy 64.677 74.881754) (xy 64.677 74.758246)
(xy 64.652905 74.637111) (xy 64.60564 74.523004) (xy 64.537023 74.420311) (xy 64.449689 74.332977) (xy 64.346996 74.26436)
(xy 64.232889 74.217095) (xy 64.111754 74.193) (xy 63.988246 74.193) (xy 63.867111 74.217095) (xy 63.753004 74.26436)
(xy 63.650311 74.332977) (xy 63.645288 74.338) (xy 63.3952 74.338) (xy 63.318799 74.275299) (xy 63.234051 74.23)
(xy 63.318799 74.184701) (xy 63.398935 74.118935) (xy 63.464701 74.038799) (xy 63.51357 73.947372) (xy 63.543663 73.848168)
(xy 63.553824 73.745) (xy 63.553824 73.445) (xy 63.543663 73.341832) (xy 63.51357 73.242628) (xy 63.464701 73.151201)
(xy 63.463716 73.15) (xy 65.271176 73.15) (xy 65.271176 74.85) (xy 65.278455 74.923905) (xy 65.300012 74.99497)
(xy 65.335019 75.060463) (xy 65.382131 75.117869) (xy 65.439537 75.164981) (xy 65.50503 75.199988) (xy 65.576095 75.221545)
(xy 65.65 75.228824) (xy 66.473001 75.228824) (xy 66.473 76.694561) (xy 66.45503 76.700012) (xy 66.389537 76.735019)
(xy 66.332131 76.782131) (xy 66.285019 76.839537) (xy 66.250012 76.90503) (xy 66.228455 76.976095) (xy 66.221176 77.05)
(xy 66.221176 77.95) (xy 66.228455 78.023905) (xy 66.250012 78.09497) (xy 66.285019 78.160463) (xy 66.332131 78.217869)
(xy 66.389537 78.264981) (xy 66.45503 78.299988) (xy 66.526095 78.321545) (xy 66.6 78.328824) (xy 67.4 78.328824)
(xy 67.473905 78.321545) (xy 67.54497 78.299988) (xy 67.610463 78.264981) (xy 67.667869 78.217869) (xy 67.714981 78.160463)
(xy 67.749988 78.09497) (xy 67.771545 78.023905) (xy 67.778824 77.95) (xy 67.778824 77.05) (xy 67.771545 76.976095)
(xy 67.749988 76.90503) (xy 67.714981 76.839537) (xy 67.667869 76.782131) (xy 67.610463 76.735019) (xy 67.54497 76.700012)
(xy 67.527 76.694561) (xy 67.527 75.182867) (xy 67.560463 75.164981) (xy 67.617869 75.117869) (xy 67.664981 75.060463)
(xy 67.699988 74.99497) (xy 67.721545 74.923905) (xy 67.728824 74.85) (xy 67.728824 73.15) (xy 67.721545 73.076095)
(xy 67.699988 73.00503) (xy 67.664981 72.939537) (xy 67.617869 72.882131) (xy 67.560463 72.835019) (xy 67.49497 72.800012)
(xy 67.423905 72.778455) (xy 67.35 72.771176) (xy 65.65 72.771176) (xy 65.576095 72.778455) (xy 65.50503 72.800012)
(xy 65.439537 72.835019) (xy 65.382131 72.882131) (xy 65.335019 72.939537) (xy 65.300012 73.00503) (xy 65.278455 73.076095)
(xy 65.271176 73.15) (xy 63.463716 73.15) (xy 63.398935 73.071065) (xy 63.318799 73.005299) (xy 63.234051 72.96)
(xy 63.318799 72.914701) (xy 63.398935 72.848935) (xy 63.464701 72.768799) (xy 63.51357 72.677372) (xy 63.543663 72.578168)
(xy 63.553824 72.475) (xy 63.553824 72.175) (xy 63.543663 72.071832) (xy 63.51357 71.972628) (xy 63.464701 71.881201)
(xy 63.398935 71.801065) (xy 63.318799 71.735299) (xy 63.234051 71.69) (xy 63.318799 71.644701) (xy 63.398935 71.578935)
(xy 63.464701 71.498799) (xy 63.51357 71.407372) (xy 63.543663 71.308168) (xy 63.553824 71.205) (xy 63.553824 70.905)
(xy 63.543663 70.801832) (xy 63.51357 70.702628) (xy 63.480902 70.64151) (xy 63.529494 70.615537) (xy 63.626185 70.536185)
(xy 63.705537 70.439494) (xy 63.764502 70.32918) (xy 63.800812 70.209482) (xy 63.813072 70.085) (xy 63.81 70.07075)
(xy 63.65125 69.912) (xy 62.277 69.912) (xy 62.277 69.932) (xy 62.023 69.932) (xy 62.023 69.912)
(xy 60.64875 69.912) (xy 60.49 70.07075) (xy 60.486928 70.085) (xy 60.499188 70.209482) (xy 60.535498 70.32918)
(xy 60.594463 70.439494) (xy 60.673815 70.536185) (xy 60.770506 70.615537) (xy 60.819098 70.64151) (xy 60.78643 70.702628)
(xy 60.756337 70.801832) (xy 60.746176 70.905) (xy 60.746176 71.205) (xy 60.756337 71.308168) (xy 60.78643 71.407372)
(xy 60.835299 71.498799) (xy 60.901065 71.578935) (xy 60.981201 71.644701) (xy 61.065949 71.69) (xy 60.981201 71.735299)
(xy 60.9048 71.798) (xy 60.525074 71.798) (xy 60.522889 71.797095) (xy 60.401754 71.773) (xy 60.278246 71.773)
(xy 60.157111 71.797095) (xy 60.043004 71.84436) (xy 59.940311 71.912977) (xy 59.852977 72.000311) (xy 59.78436 72.103004)
(xy 59.737095 72.217111) (xy 59.713 72.338246) (xy 59.713 72.461754) (xy 59.737095 72.582889) (xy 59.78436 72.696996)
(xy 59.852977 72.799689) (xy 59.940311 72.887023) (xy 60.043004 72.95564) (xy 60.157111 73.002905) (xy 60.278246 73.027)
(xy 60.401754 73.027) (xy 60.522889 73.002905) (xy 60.636996 72.95564) (xy 60.739689 72.887023) (xy 60.774712 72.852)
(xy 60.9048 72.852) (xy 60.981201 72.914701) (xy 61.065949 72.96) (xy 60.981201 73.005299) (xy 60.901065 73.071065)
(xy 60.835299 73.151201) (xy 60.78643 73.242628) (xy 60.756337 73.341832) (xy 60.746176 73.445) (xy 60.746176 73.745)
(xy 60.756337 73.848168) (xy 60.78643 73.947372) (xy 60.835299 74.038799) (xy 60.901065 74.118935) (xy 60.981201 74.184701)
(xy 61.065949 74.23) (xy 60.981201 74.275299) (xy 60.901065 74.341065) (xy 60.835299 74.421201) (xy 60.78643 74.512628)
(xy 60.756337 74.611832) (xy 60.746176 74.715) (xy 60.746176 75.015) (xy 60.756337 75.118168) (xy 60.78643 75.217372)
(xy 60.835299 75.308799) (xy 60.901065 75.388935) (xy 60.981201 75.454701) (xy 61.065949 75.5) (xy 60.981201 75.545299)
(xy 60.9048 75.608) (xy 59.72329 75.608) (xy 59.427 75.311711) (xy 59.427 69.485) (xy 60.486928 69.485)
(xy 60.49 69.49925) (xy 60.64875 69.658) (xy 62.023 69.658) (xy 62.023 69.00875) (xy 62.277 69.00875)
(xy 62.277 69.658) (xy 63.65125 69.658) (xy 63.81 69.49925) (xy 63.813072 69.485) (xy 63.800812 69.360518)
(xy 63.764502 69.24082) (xy 63.705537 69.130506) (xy 63.626185 69.033815) (xy 63.529494 68.954463) (xy 63.41918 68.895498)
(xy 63.299482 68.859188) (xy 63.175 68.846928) (xy 62.43575 68.85) (xy 62.277 69.00875) (xy 62.023 69.00875)
(xy 61.86425 68.85) (xy 61.125 68.846928) (xy 61.000518 68.859188) (xy 60.88082 68.895498) (xy 60.770506 68.954463)
(xy 60.673815 69.033815) (xy 60.594463 69.130506) (xy 60.535498 69.24082) (xy 60.499188 69.360518) (xy 60.486928 69.485)
(xy 59.427 69.485) (xy 59.427 68.44588) (xy 59.429549 68.419999) (xy 59.419374 68.31669) (xy 59.389239 68.21735)
(xy 59.376997 68.194447) (xy 59.340304 68.125798) (xy 59.274448 68.045552) (xy 59.254339 68.029049) (xy 58.612962 67.387673)
(xy 58.602905 67.337111) (xy 58.55564 67.223004) (xy 58.487023 67.120311) (xy 58.399689 67.032977) (xy 58.296996 66.96436)
(xy 58.182889 66.917095) (xy 58.061754 66.893) (xy 57.938246 66.893) (xy 57.817111 66.917095) (xy 57.703004 66.96436)
(xy 57.647 67.001781) (xy 57.647 66.598289) (xy 59.547895 64.697396) (xy 59.602097 64.719847) (xy 59.839151 64.767)
(xy 60.080849 64.767) (xy 60.317903 64.719847) (xy 60.541202 64.627353) (xy 60.629436 64.568397) (xy 61.651208 64.568397)
(xy 61.728843 64.817472) (xy 61.992883 64.943371) (xy 62.276411 65.015339) (xy 62.568531 65.030611) (xy 62.858019 64.988599)
(xy 63.133747 64.890919) (xy 63.271157 64.817472) (xy 63.348792 64.568397) (xy 62.5 63.719605) (xy 61.651208 64.568397)
(xy 60.629436 64.568397) (xy 60.742167 64.493073) (xy 60.913073 64.322167) (xy 61.047353 64.121202) (xy 61.092152 64.013049)
(xy 61.149081 64.173747) (xy 61.222528 64.311157) (xy 61.471603 64.388792) (xy 62.320395 63.54) (xy 62.679605 63.54)
(xy 63.528397 64.388792) (xy 63.777472 64.311157) (xy 63.903371 64.047117) (xy 63.975339 63.763589) (xy 63.990611 63.471469)
(xy 63.948599 63.181981) (xy 63.850919 62.906253) (xy 63.777472 62.768843) (xy 63.528397 62.691208) (xy 62.679605 63.54)
(xy 62.320395 63.54) (xy 61.471603 62.691208) (xy 61.222528 62.768843) (xy 61.096629 63.032883) (xy 61.089566 63.060709)
(xy 61.047353 62.958798) (xy 60.913073 62.757833) (xy 60.742167 62.586927) (xy 60.541202 62.452647) (xy 60.317903 62.360153)
(xy 60.080849 62.313) (xy 59.839151 62.313) (xy 59.602097 62.360153) (xy 59.378798 62.452647) (xy 59.177833 62.586927)
(xy 59.006927 62.757833) (xy 58.872647 62.958798) (xy 58.780153 63.182097) (xy 58.733 63.419151) (xy 58.733 63.660849)
(xy 58.780153 63.897903) (xy 58.802604 63.952105) (xy 56.765662 65.989049) (xy 56.745553 66.005552) (xy 56.716769 66.040626)
(xy 56.679696 66.085799) (xy 56.637 66.165679) (xy 56.637 65.068289) (xy 57.007894 64.697395) (xy 57.062097 64.719847)
(xy 57.299151 64.767) (xy 57.540849 64.767) (xy 57.777903 64.719847) (xy 58.001202 64.627353) (xy 58.202167 64.493073)
(xy 58.373073 64.322167) (xy 58.507353 64.121202) (xy 58.599847 63.897903) (xy 58.647 63.660849) (xy 58.647 63.419151)
(xy 58.599847 63.182097) (xy 58.507353 62.958798) (xy 58.373073 62.757833) (xy 58.202167 62.586927) (xy 58.001202 62.452647)
(xy 57.777903 62.360153) (xy 57.540849 62.313) (xy 57.299151 62.313) (xy 57.062097 62.360153) (xy 56.838798 62.452647)
(xy 56.637833 62.586927) (xy 56.466927 62.757833) (xy 56.332647 62.958798) (xy 56.240153 63.182097) (xy 56.193 63.419151)
(xy 56.193 63.660849) (xy 56.240153 63.897903) (xy 56.262605 63.952106) (xy 55.807 64.407711) (xy 55.807 64.34824)
(xy 55.833073 64.322167) (xy 55.967353 64.121202) (xy 56.059847 63.897903) (xy 56.107 63.660849) (xy 56.107 63.419151)
(xy 56.059847 63.182097) (xy 55.967353 62.958798) (xy 55.833073 62.757833) (xy 55.662167 62.586927) (xy 55.461202 62.452647)
(xy 55.237903 62.360153) (xy 55.000849 62.313) (xy 54.759151 62.313) (xy 54.522097 62.360153) (xy 54.298798 62.452647)
(xy 54.097833 62.586927) (xy 53.926927 62.757833) (xy 53.792647 62.958798) (xy 53.700153 63.182097) (xy 53.653 63.419151)
(xy 53.653 63.660849) (xy 53.700153 63.897903) (xy 53.792647 64.121202) (xy 53.926927 64.322167) (xy 54.097833 64.493073)
(xy 54.298798 64.627353) (xy 54.522097 64.719847) (xy 54.753001 64.765777) (xy 54.753001 67.29771) (xy 52.867 65.411711)
(xy 52.867 64.649804) (xy 52.921202 64.627353) (xy 53.122167 64.493073) (xy 53.293073 64.322167) (xy 53.427353 64.121202)
(xy 53.519847 63.897903) (xy 53.567 63.660849) (xy 53.567 63.419151) (xy 53.519847 63.182097) (xy 53.427353 62.958798)
(xy 53.293073 62.757833) (xy 53.122167 62.586927) (xy 52.921202 62.452647) (xy 52.697903 62.360153) (xy 52.460849 62.313)
(xy 52.219151 62.313) (xy 51.982097 62.360153) (xy 51.758798 62.452647) (xy 51.557833 62.586927) (xy 51.386927 62.757833)
(xy 51.252647 62.958798) (xy 51.160153 63.182097) (xy 51.113 63.419151) (xy 51.113 63.660849) (xy 51.160153 63.897903)
(xy 51.252647 64.121202) (xy 51.386927 64.322167) (xy 51.557833 64.493073) (xy 51.758798 64.627353) (xy 51.813001 64.649805)
(xy 51.813001 65.60411) (xy 51.810451 65.63) (xy 51.820626 65.733309) (xy 51.850761 65.832649) (xy 51.899696 65.924201)
(xy 51.899697 65.924202) (xy 51.965553 66.004448) (xy 51.985662 66.020951) (xy 54.003 68.038291) (xy 54.003 68.860255)
(xy 53.999482 68.859188) (xy 53.875 68.846928) (xy 53.13575 68.85) (xy 52.977 69.00875) (xy 52.977 69.658)
(xy 52.997 69.658) (xy 52.997 69.912) (xy 52.977 69.912) (xy 52.977 69.932) (xy 52.723 69.932)
(xy 52.723 69.912) (xy 51.34875 69.912) (xy 51.19 70.07075) (xy 51.186928 70.085) (xy 51.199188 70.209482)
(xy 51.235498 70.32918) (xy 51.294463 70.439494) (xy 51.373815 70.536185) (xy 51.470506 70.615537) (xy 51.519098 70.64151)
(xy 51.48643 70.702628) (xy 51.456337 70.801832) (xy 51.446176 70.905) (xy 51.446176 71.205) (xy 51.456337 71.308168)
(xy 51.48643 71.407372) (xy 51.519098 71.46849) (xy 51.470506 71.494463) (xy 51.373815 71.573815) (xy 51.294463 71.670506)
(xy 51.235498 71.78082) (xy 51.199188 71.900518) (xy 51.186928 72.025) (xy 51.19 72.03925) (xy 51.34875 72.198)
(xy 52.723 72.198) (xy 52.723 72.178) (xy 52.977 72.178) (xy 52.977 72.198) (xy 54.35125 72.198)
(xy 54.51 72.03925) (xy 54.513072 72.025) (xy 54.500812 71.900518) (xy 54.464502 71.78082) (xy 54.405537 71.670506)
(xy 54.332902 71.582) (xy 54.379119 71.582) (xy 54.405 71.584549) (xy 54.430881 71.582) (xy 54.50831 71.574374)
(xy 54.60765 71.544239) (xy 54.699202 71.495304) (xy 54.753 71.451153) (xy 54.753 73.068) (xy 54.332902 73.068)
(xy 54.405537 72.979494) (xy 54.464502 72.86918) (xy 54.500812 72.749482) (xy 54.513072 72.625) (xy 54.51 72.61075)
(xy 54.35125 72.452) (xy 52.977 72.452) (xy 52.977 72.472) (xy 52.723 72.472) (xy 52.723 72.452)
(xy 51.34875 72.452) (xy 51.19 72.61075) (xy 51.186928 72.625) (xy 51.199188 72.749482) (xy 51.235498 72.86918)
(xy 51.294463 72.979494) (xy 51.373815 73.076185) (xy 51.470506 73.155537) (xy 51.519098 73.18151) (xy 51.48643 73.242628)
(xy 51.456337 73.341832) (xy 51.446176 73.445) (xy 51.446176 73.745) (xy 51.456337 73.848168) (xy 51.48643 73.947372)
(xy 51.535299 74.038799) (xy 51.601065 74.118935) (xy 51.681201 74.184701) (xy 51.765949 74.23) (xy 51.681201 74.275299)
(xy 51.6048 74.338) (xy 49.24088 74.338) (xy 49.214999 74.335451) (xy 49.157999 74.341065) (xy 49.11169 74.345626)
(xy 49.01235 74.375761) (xy 48.920798 74.424696) (xy 48.840552 74.490552) (xy 48.824049 74.510661) (xy 47.895662 75.439049)
(xy 47.875553 75.455552) (xy 47.836146 75.50357) (xy 47.809696 75.535799) (xy 47.760761 75.627351) (xy 47.730626 75.726691)
(xy 47.720451 75.83) (xy 47.723001 75.855891) (xy 47.723 82.124119) (xy 47.720451 82.15) (xy 47.723 82.17588)
(xy 47.730626 82.253309) (xy 47.760761 82.352649) (xy 47.809696 82.444202) (xy 47.875552 82.524448) (xy 47.895666 82.540955)
(xy 50.473001 85.118291) (xy 50.473001 85.146176) (xy 50.425 85.146176) (xy 50.336463 85.154896) (xy 50.251329 85.180721)
(xy 50.25 85.181431) (xy 50.248671 85.180721) (xy 50.163537 85.154896) (xy 50.075 85.146176) (xy 49.925 85.146176)
(xy 49.836463 85.154896) (xy 49.751329 85.180721) (xy 49.75 85.181431) (xy 49.748671 85.180721) (xy 49.663537 85.154896)
(xy 49.575 85.146176) (xy 49.425 85.146176) (xy 49.336463 85.154896) (xy 49.251329 85.180721) (xy 49.25 85.181431)
(xy 49.248671 85.180721) (xy 49.163537 85.154896) (xy 49.075 85.146176) (xy 48.925 85.146176) (xy 48.836463 85.154896)
(xy 48.751329 85.180721) (xy 48.75 85.181431) (xy 48.748671 85.180721) (xy 48.663537 85.154896) (xy 48.575 85.146176)
(xy 48.425 85.146176) (xy 48.336463 85.154896) (xy 48.251329 85.180721) (xy 48.25 85.181431) (xy 48.248671 85.180721)
(xy 48.163537 85.154896) (xy 48.075 85.146176) (xy 47.925 85.146176) (xy 47.836463 85.154896) (xy 47.751329 85.180721)
(xy 47.75 85.181431) (xy 47.748671 85.180721) (xy 47.663537 85.154896) (xy 47.575 85.146176) (xy 47.527 85.146176)
(xy 47.527 69.485) (xy 51.186928 69.485) (xy 51.19 69.49925) (xy 51.34875 69.658) (xy 52.723 69.658)
(xy 52.723 69.00875) (xy 52.56425 68.85) (xy 51.825 68.846928) (xy 51.700518 68.859188) (xy 51.58082 68.895498)
(xy 51.470506 68.954463) (xy 51.373815 69.033815) (xy 51.294463 69.130506) (xy 51.235498 69.24082) (xy 51.199188 69.360518)
(xy 51.186928 69.485) (xy 47.527 69.485) (xy 47.527 65.995877) (xy 47.529549 65.969999) (xy 47.525038 65.924201)
(xy 47.519374 65.86669) (xy 47.489239 65.76735) (xy 47.440304 65.675798) (xy 47.374448 65.595552) (xy 47.354339 65.579049)
(xy 44.780955 63.005666) (xy 44.764448 62.985552) (xy 44.684202 62.919696) (xy 44.59265 62.870761) (xy 44.49331 62.840626)
(xy 44.415881 62.833) (xy 44.39 62.830451) (xy 44.364119 62.833) (xy 39.887214 62.833) (xy 39.887 62.817734)
(xy 39.887 62.795436) (xy 39.886635 62.79173) (xy 39.886583 62.788026) (xy 39.884098 62.765971) (xy 39.879374 62.718007)
(xy 39.878292 62.714439) (xy 39.878232 62.713908) (xy 39.876827 62.680534) (xy 39.866314 62.637279) (xy 39.857018 62.593747)
(xy 39.843803 62.563068) (xy 39.833818 62.534535) (xy 39.82502 62.502302) (xy 39.805138 62.462457) (xy 39.786396 62.4221)
(xy 39.766683 62.395128) (xy 39.750599 62.36953) (xy 39.734852 62.34007) (xy 39.706616 62.305664) (xy 39.679349 62.270471)
(xy 39.654128 62.248561) (xy 39.632756 62.227189) (xy 39.610846 62.201968) (xy 39.575662 62.174708) (xy 39.541247 62.146464)
(xy 39.51178 62.130714) (xy 39.486189 62.114634) (xy 39.459217 62.094921) (xy 39.41886 62.076179) (xy 39.379015 62.056297)
(xy 39.346779 62.047498) (xy 39.318254 62.037516) (xy 39.28757 62.024299) (xy 39.244023 62.015) (xy 39.200783 62.00449)
(xy 39.167408 62.003085) (xy 39.137359 61.999699) (xy 39.104506 61.993642) (xy 39.06 61.994267) (xy 39.015495 61.993642)
(xy 38.982638 61.9997) (xy 38.952593 62.003085) (xy 38.919216 62.00449) (xy 38.875957 62.015004) (xy 38.832429 62.024299)
(xy 38.801746 62.037516) (xy 38.773217 62.047499) (xy 38.740984 62.056297) (xy 38.701139 62.076179) (xy 38.660782 62.094921)
(xy 38.63381 62.114634) (xy 38.608212 62.130718) (xy 38.578752 62.146465) (xy 38.544346 62.174701) (xy 38.509153 62.201968)
(xy 38.487243 62.227189) (xy 38.465871 62.248561) (xy 38.44065 62.270471) (xy 38.41339 62.305655) (xy 38.385146 62.34007)
(xy 38.369396 62.369537) (xy 38.353316 62.395128) (xy 38.333603 62.4221) (xy 38.314861 62.462457) (xy 38.294979 62.502302)
(xy 38.28618 62.534538) (xy 38.276197 62.563068) (xy 38.262979 62.593754) (xy 38.253683 62.637288) (xy 38.243172 62.680534)
(xy 38.241767 62.713913) (xy 38.241707 62.714448) (xy 38.240627 62.718007) (xy 38.235911 62.765887) (xy 38.233416 62.788035)
(xy 38.233364 62.791751) (xy 38.233001 62.795436) (xy 38.233001 62.817656) (xy 38.232326 62.86583) (xy 38.233001 62.869491)
(xy 38.233001 62.921428) (xy 38.21886 62.914861) (xy 38.179015 62.894979) (xy 38.146779 62.88618) (xy 38.118249 62.876197)
(xy 38.087563 62.862979) (xy 38.044029 62.853683) (xy 38.000783 62.843172) (xy 37.967404 62.841767) (xy 37.966874 62.841707)
(xy 37.96331 62.840626) (xy 37.91536 62.835903) (xy 37.893282 62.833416) (xy 37.889578 62.833364) (xy 37.885881 62.833)
(xy 37.863591 62.833) (xy 37.815487 62.832326) (xy 37.811831 62.833) (xy 35.403377 62.833) (xy 35.377499 62.830451)
(xy 35.351621 62.833) (xy 35.351619 62.833) (xy 35.27419 62.840626) (xy 35.17485 62.870761) (xy 35.083298 62.919696)
(xy 35.003052 62.985552) (xy 34.986549 63.005661) (xy 32.614883 65.377328) (xy 32.602905 65.317111) (xy 32.55564 65.203004)
(xy 32.487023 65.100311) (xy 32.399689 65.012977) (xy 32.296996 64.94436) (xy 32.182889 64.897095) (xy 32.061754 64.873)
(xy 31.938246 64.873) (xy 31.817111 64.897095) (xy 31.703004 64.94436) (xy 31.660141 64.973) (xy 31.27588 64.973)
(xy 31.249999 64.970451) (xy 31.14669 64.980626) (xy 31.04735 65.010761) (xy 30.955798 65.059696) (xy 30.875552 65.125552)
(xy 30.859049 65.145661) (xy 29.09253 66.912181) (xy 29.067869 66.882131) (xy 29.010463 66.835019) (xy 28.94497 66.800012)
(xy 28.873905 66.778455) (xy 28.836848 66.774805) (xy 28.835 66.58575) (xy 28.67625 66.427) (xy 27.627 66.427)
(xy 27.627 66.447) (xy 27.373 66.447) (xy 27.373 66.427) (xy 26.32375 66.427) (xy 26.165 66.58575)
(xy 26.161928 66.9) (xy 26.174188 67.024482) (xy 26.210498 67.14418) (xy 26.269463 67.254494) (xy 26.348815 67.351185)
(xy 26.445506 67.430537) (xy 26.55582 67.489502) (xy 26.675518 67.525812) (xy 26.8 67.538072) (xy 26.821176 67.537915)
(xy 26.821176 67.85) (xy 26.828455 67.923905) (xy 26.850012 67.99497) (xy 26.879426 68.05) (xy 26.850012 68.10503)
(xy 26.828455 68.176095) (xy 26.821176 68.25) (xy 26.821176 68.95) (xy 26.828455 69.023905) (xy 26.850012 69.09497)
(xy 26.879426 69.15) (xy 26.867133 69.173) (xy 26.435637 69.173) (xy 26.367023 69.070311) (xy 26.279689 68.982977)
(xy 26.176996 68.91436) (xy 26.062889 68.867095) (xy 25.941754 68.843) (xy 25.818246 68.843) (xy 25.697111 68.867095)
(xy 25.583004 68.91436) (xy 25.480311 68.982977) (xy 25.392977 69.070311) (xy 25.32436 69.173004) (xy 25.277095 69.287111)
(xy 25.253 69.408246) (xy 25.253 69.531754) (xy 25.277095 69.652889) (xy 25.32436 69.766996) (xy 25.392977 69.869689)
(xy 25.480311 69.957023) (xy 25.583004 70.02564) (xy 25.697111 70.072905) (xy 25.745368 70.082504) (xy 25.815798 70.140304)
(xy 25.901747 70.186244) (xy 25.90735 70.189239) (xy 26.00669 70.219374) (xy 26.109999 70.229549) (xy 26.13588 70.227)
(xy 26.604073 70.227) (xy 26.574188 70.325518) (xy 26.561928 70.45) (xy 26.565 70.51425) (xy 26.72375 70.673)
(xy 27.873 70.673) (xy 27.873 70.653) (xy 28.127 70.653) (xy 28.127 70.673) (xy 29.27625 70.673)
(xy 29.435 70.51425) (xy 29.438072 70.45) (xy 29.425812 70.325518) (xy 29.395927 70.227) (xy 30.629935 70.227)
(xy 30.65796 70.25) (xy 30.571201 70.321201) (xy 30.496885 70.411756) (xy 30.46415 70.473) (xy 30.02588 70.473)
(xy 29.999999 70.470451) (xy 29.931069 70.47724) (xy 29.89669 70.480626) (xy 29.79735 70.510761) (xy 29.705798 70.559696)
(xy 29.625552 70.625552) (xy 29.609049 70.645661) (xy 29.30198 70.95273) (xy 29.27625 70.927) (xy 28.127 70.927)
(xy 28.127 70.947) (xy 27.873 70.947) (xy 27.873 70.927) (xy 26.72375 70.927) (xy 26.565 71.08575)
(xy 26.561928 71.15) (xy 26.574188 71.274482) (xy 26.61014 71.393) (xy 26.339859 71.393) (xy 26.296996 71.36436)
(xy 26.182889 71.317095) (xy 26.061754 71.293) (xy 25.938246 71.293) (xy 25.817111 71.317095) (xy 25.703004 71.36436)
(xy 25.600311 71.432977) (xy 25.512977 71.520311) (xy 25.44436 71.623004) (xy 25.397095 71.737111) (xy 25.373 71.858246)
(xy 25.373 71.981754) (xy 25.397095 72.102889) (xy 25.44436 72.216996) (xy 25.512977 72.319689) (xy 25.516288 72.323)
(xy 21.877 72.323) (xy 21.877 68.363265) (xy 24.540265 65.7) (xy 26.161928 65.7) (xy 26.165 66.01425)
(xy 26.32375 66.173) (xy 27.373 66.173) (xy 27.373 65.22375) (xy 27.627 65.22375) (xy 27.627 66.173)
(xy 28.67625 66.173) (xy 28.835 66.01425) (xy 28.838072 65.7) (xy 28.825812 65.575518) (xy 28.789502 65.45582)
(xy 28.730537 65.345506) (xy 28.651185 65.248815) (xy 28.554494 65.169463) (xy 28.44418 65.110498) (xy 28.324482 65.074188)
(xy 28.2 65.061928) (xy 27.78575 65.065) (xy 27.627 65.22375) (xy 27.373 65.22375) (xy 27.21425 65.065)
(xy 26.8 65.061928) (xy 26.675518 65.074188) (xy 26.55582 65.110498) (xy 26.445506 65.169463) (xy 26.348815 65.248815)
(xy 26.269463 65.345506) (xy 26.210498 65.45582) (xy 26.174188 65.575518) (xy 26.161928 65.7) (xy 24.540265 65.7)
(xy 35.561442 54.678824) (xy 36.560501 54.678824) (xy 36.5605 56.821176) (xy 36.3 56.821176) (xy 36.177323 56.833259)
(xy 36.059359 56.869042) (xy 35.950644 56.927152) (xy 35.855354 57.005354) (xy 35.777152 57.100644) (xy 35.719042 57.209359)
(xy 35.683259 57.327323) (xy 35.671176 57.45) (xy 35.671176 58.55) (xy 35.683259 58.672677) (xy 35.719042 58.790641)
(xy 35.777152 58.899356) (xy 35.855354 58.994646) (xy 35.950644 59.072848) (xy 36.059359 59.130958) (xy 36.177323 59.166741)
(xy 36.3 59.178824) (xy 38.575 59.178824) (xy 38.697677 59.166741) (xy 38.815641 59.130958) (xy 38.924356 59.072848)
(xy 39.019646 58.994646) (xy 39.097848 58.899356) (xy 39.150955 58.8) (xy 39.536928 58.8) (xy 39.549188 58.924482)
(xy 39.585498 59.04418) (xy 39.644463 59.154494) (xy 39.723815 59.251185) (xy 39.820506 59.330537) (xy 39.93082 59.389502)
(xy 40.050518 59.425812) (xy 40.175 59.438072) (xy 41.27675 59.435) (xy 41.4355 59.27625) (xy 41.4355 58.127)
(xy 41.6895 58.127) (xy 41.6895 59.27625) (xy 41.84825 59.435) (xy 42.95 59.438072) (xy 43.074482 59.425812)
(xy 43.19418 59.389502) (xy 43.304494 59.330537) (xy 43.401185 59.251185) (xy 43.480537 59.154494) (xy 43.539502 59.04418)
(xy 43.575812 58.924482) (xy 43.588072 58.8) (xy 43.585 58.28575) (xy 43.42625 58.127) (xy 41.6895 58.127)
(xy 41.4355 58.127) (xy 39.69875 58.127) (xy 39.54 58.28575) (xy 39.536928 58.8) (xy 39.150955 58.8)
(xy 39.155958 58.790641) (xy 39.191741 58.672677) (xy 39.203824 58.55) (xy 39.203824 57.45) (xy 39.191741 57.327323)
(xy 39.155958 57.209359) (xy 39.150956 57.2) (xy 39.536928 57.2) (xy 39.54 57.71425) (xy 39.69875 57.873)
(xy 41.4355 57.873) (xy 41.4355 56.72375) (xy 41.6895 56.72375) (xy 41.6895 57.873) (xy 43.42625 57.873)
(xy 43.585 57.71425) (xy 43.588072 57.2) (xy 43.575812 57.075518) (xy 43.539502 56.95582) (xy 43.480537 56.845506)
(xy 43.401185 56.748815) (xy 43.304494 56.669463) (xy 43.19418 56.610498) (xy 43.074482 56.574188) (xy 42.95 56.561928)
(xy 41.84825 56.565) (xy 41.6895 56.72375) (xy 41.4355 56.72375) (xy 41.27675 56.565) (xy 40.175 56.561928)
(xy 40.050518 56.574188) (xy 39.93082 56.610498) (xy 39.820506 56.669463) (xy 39.723815 56.748815) (xy 39.644463 56.845506)
(xy 39.585498 56.95582) (xy 39.549188 57.075518) (xy 39.536928 57.2) (xy 39.150956 57.2) (xy 39.097848 57.100644)
(xy 39.019646 57.005354) (xy 38.924356 56.927152) (xy 38.815641 56.869042) (xy 38.697677 56.833259) (xy 38.575 56.821176)
(xy 38.3145 56.821176) (xy 38.3145 53.580579) (xy 38.318743 53.5375) (xy 38.30181 53.365577) (xy 38.278824 53.289803)
(xy 38.278824 51.1645) (xy 38.984893 51.1645) (xy 38.991981 51.173136) (xy 39.018973 51.206026) (xy 39.032702 51.217293)
(xy 39.043973 51.231027) (xy 39.147059 51.315628) (xy 39.26467 51.378492) (xy 39.392285 51.417204) (xy 39.491748 51.427)
(xy 39.491757 51.427) (xy 39.524999 51.430274) (xy 39.558241 51.427) (xy 46.245003 51.427) (xy 46.20303 51.444386)
(xy 46.100337 51.513003) (xy 46.013003 51.600337) (xy 45.944386 51.70303) (xy 45.897121 51.817137) (xy 45.873026 51.938272)
(xy 45.873026 52.06178) (xy 45.897121 52.182915) (xy 45.944386 52.297022) (xy 45.973026 52.339885) (xy 45.973026 52.379459)
(xy 45.973027 52.379469) (xy 45.973026 62.134145) (xy 45.970477 62.160026) (xy 45.979341 62.250021) (xy 45.980652 62.263335)
(xy 46.010787 62.362675) (xy 46.059722 62.454228) (xy 46.125578 62.534474) (xy 46.145692 62.550981) (xy 47.267038 63.672328)
(xy 47.277095 63.722889) (xy 47.32436 63.836996) (xy 47.392977 63.939689) (xy 47.480311 64.027023) (xy 47.583004 64.09564)
(xy 47.697111 64.142905) (xy 47.818246 64.167) (xy 47.941754 64.167) (xy 48.062889 64.142905) (xy 48.176996 64.09564)
(xy 48.279689 64.027023) (xy 48.367023 63.939689) (xy 48.43564 63.836996) (xy 48.482905 63.722889) (xy 48.507 63.601754)
(xy 48.507 63.478246) (xy 48.482905 63.357111) (xy 48.43564 63.243004) (xy 48.367023 63.140311) (xy 48.279689 63.052977)
(xy 48.176996 62.98436) (xy 48.062889 62.937095) (xy 48.012328 62.927038) (xy 47.027026 61.941737) (xy 47.027026 60.879151)
(xy 51.113 60.879151) (xy 51.113 61.120849) (xy 51.160153 61.357903) (xy 51.252647 61.581202) (xy 51.386927 61.782167)
(xy 51.557833 61.953073) (xy 51.758798 62.087353) (xy 51.982097 62.179847) (xy 52.219151 62.227) (xy 52.460849 62.227)
(xy 52.697903 62.179847) (xy 52.921202 62.087353) (xy 53.122167 61.953073) (xy 53.293073 61.782167) (xy 53.427353 61.581202)
(xy 53.519847 61.357903) (xy 53.567 61.120849) (xy 53.567 60.879151) (xy 53.653 60.879151) (xy 53.653 61.120849)
(xy 53.700153 61.357903) (xy 53.792647 61.581202) (xy 53.926927 61.782167) (xy 54.097833 61.953073) (xy 54.298798 62.087353)
(xy 54.522097 62.179847) (xy 54.759151 62.227) (xy 55.000849 62.227) (xy 55.237903 62.179847) (xy 55.461202 62.087353)
(xy 55.662167 61.953073) (xy 55.833073 61.782167) (xy 55.967353 61.581202) (xy 56.059847 61.357903) (xy 56.107 61.120849)
(xy 56.107 60.879151) (xy 56.059847 60.642097) (xy 55.967353 60.418798) (xy 55.833073 60.217833) (xy 55.662167 60.046927)
(xy 55.461202 59.912647) (xy 55.237903 59.820153) (xy 55.000849 59.773) (xy 54.759151 59.773) (xy 54.522097 59.820153)
(xy 54.298798 59.912647) (xy 54.097833 60.046927) (xy 53.926927 60.217833) (xy 53.792647 60.418798) (xy 53.700153 60.642097)
(xy 53.653 60.879151) (xy 53.567 60.879151) (xy 53.519847 60.642097) (xy 53.427353 60.418798) (xy 53.293073 60.217833)
(xy 53.122167 60.046927) (xy 52.921202 59.912647) (xy 52.697903 59.820153) (xy 52.460849 59.773) (xy 52.219151 59.773)
(xy 51.982097 59.820153) (xy 51.758798 59.912647) (xy 51.557833 60.046927) (xy 51.386927 60.217833) (xy 51.252647 60.418798)
(xy 51.160153 60.642097) (xy 51.113 60.879151) (xy 47.027026 60.879151) (xy 47.027026 52.339885) (xy 47.055666 52.297022)
(xy 47.102931 52.182915) (xy 47.127026 52.06178) (xy 47.127026 51.938272) (xy 47.102931 51.817137) (xy 47.055666 51.70303)
(xy 46.987049 51.600337) (xy 46.899715 51.513003) (xy 46.797022 51.444386) (xy 46.755049 51.427) (xy 47.871176 51.427)
(xy 47.871176 51.5) (xy 47.878455 51.573905) (xy 47.900012 51.64497) (xy 47.935019 51.710463) (xy 47.982131 51.767869)
(xy 48.039537 51.814981) (xy 48.10503 51.849988) (xy 48.176095 51.871545) (xy 48.25 51.878824) (xy 49.25 51.878824)
(xy 49.324293 51.871467) (xy 49.395336 51.849836) (xy 49.400035 51.847318) (xy 49.40503 51.849988) (xy 49.476095 51.871545)
(xy 49.55 51.878824) (xy 50.921402 51.878824) (xy 51.497784 52.455206) (xy 51.518983 52.481037) (xy 51.622069 52.565638)
(xy 51.73968 52.628502) (xy 51.867295 52.667214) (xy 51.966758 52.67701) (xy 51.966767 52.67701) (xy 52.000009 52.680284)
(xy 52.033251 52.67701) (xy 56.360986 52.67701) (xy 56.305498 52.78082) (xy 56.269188 52.900518) (xy 56.256928 53.025)
(xy 56.26 53.17675) (xy 56.41875 53.3355) (xy 57.243 53.3355) (xy 57.243 53.3155) (xy 57.497 53.3155)
(xy 57.497 53.3355) (xy 57.517 53.3355) (xy 57.517 53.5895) (xy 57.497 53.5895) (xy 57.497 53.6095)
(xy 57.243 53.6095) (xy 57.243 53.5895) (xy 56.41875 53.5895) (xy 56.26 53.74825) (xy 56.256928 53.9)
(xy 56.269188 54.024482) (xy 56.305498 54.14418) (xy 56.364463 54.254494) (xy 56.443815 54.351185) (xy 56.540506 54.430537)
(xy 56.625666 54.476057) (xy 56.616885 54.486756) (xy 56.561664 54.590068) (xy 56.527658 54.702169) (xy 56.516176 54.81875)
(xy 56.516176 55.25625) (xy 56.527658 55.372831) (xy 56.561664 55.484932) (xy 56.616885 55.588244) (xy 56.691201 55.678799)
(xy 56.781756 55.753115) (xy 56.885068 55.808336) (xy 56.893001 55.810742) (xy 56.893 59.890196) (xy 56.838798 59.912647)
(xy 56.637833 60.046927) (xy 56.466927 60.217833) (xy 56.332647 60.418798) (xy 56.240153 60.642097) (xy 56.193 60.879151)
(xy 56.193 61.120849) (xy 56.240153 61.357903) (xy 56.332647 61.581202) (xy 56.466927 61.782167) (xy 56.637833 61.953073)
(xy 56.838798 62.087353) (xy 57.062097 62.179847) (xy 57.299151 62.227) (xy 57.540849 62.227) (xy 57.777903 62.179847)
(xy 58.001202 62.087353) (xy 58.202167 61.953073) (xy 58.373073 61.782167) (xy 58.507353 61.581202) (xy 58.599847 61.357903)
(xy 58.647 61.120849) (xy 58.647 60.879151) (xy 58.599847 60.642097) (xy 58.507353 60.418798) (xy 58.373073 60.217833)
(xy 58.202167 60.046927) (xy 58.001202 59.912647) (xy 57.947 59.890196) (xy 57.947 55.759125) (xy 57.958244 55.753115)
(xy 58.048799 55.678799) (xy 58.123115 55.588244) (xy 58.178336 55.484932) (xy 58.212342 55.372831) (xy 58.223824 55.25625)
(xy 58.223824 54.81875) (xy 58.212342 54.702169) (xy 58.178336 54.590068) (xy 58.123115 54.486756) (xy 58.114334 54.476057)
(xy 58.199494 54.430537) (xy 58.296185 54.351185) (xy 58.375537 54.254494) (xy 58.434502 54.14418) (xy 58.469702 54.028142)
(xy 59.283 54.84144) (xy 59.283001 59.764658) (xy 59.283 59.764668) (xy 59.283 59.976657) (xy 59.177833 60.046927)
(xy 59.006927 60.217833) (xy 58.872647 60.418798) (xy 58.780153 60.642097) (xy 58.733 60.879151) (xy 58.733 61.120849)
(xy 58.780153 61.357903) (xy 58.872647 61.581202) (xy 59.006927 61.782167) (xy 59.177833 61.953073) (xy 59.378798 62.087353)
(xy 59.602097 62.179847) (xy 59.839151 62.227) (xy 60.080849 62.227) (xy 60.317903 62.179847) (xy 60.541202 62.087353)
(xy 60.742167 61.953073) (xy 60.913073 61.782167) (xy 61.013112 61.632447) (xy 61.011928 61.85) (xy 61.024188 61.974482)
(xy 61.060498 62.09418) (xy 61.119463 62.204494) (xy 61.198815 62.301185) (xy 61.295506 62.380537) (xy 61.40582 62.439502)
(xy 61.525518 62.475812) (xy 61.65 62.488072) (xy 61.658557 62.488025) (xy 61.651208 62.511603) (xy 62.5 63.360395)
(xy 63.348792 62.511603) (xy 63.341443 62.488025) (xy 63.35 62.488072) (xy 63.474482 62.475812) (xy 63.59418 62.439502)
(xy 63.704494 62.380537) (xy 63.801185 62.301185) (xy 63.880537 62.204494) (xy 63.939502 62.09418) (xy 63.975812 61.974482)
(xy 63.988072 61.85) (xy 63.985 61.28575) (xy 63.82625 61.127) (xy 62.627 61.127) (xy 62.627 61.147)
(xy 62.373 61.147) (xy 62.373 61.127) (xy 62.353 61.127) (xy 62.353 60.873) (xy 62.373 60.873)
(xy 62.373 59.67375) (xy 62.627 59.67375) (xy 62.627 60.873) (xy 63.82625 60.873) (xy 63.985 60.71425)
(xy 63.988072 60.15) (xy 63.975812 60.025518) (xy 63.939502 59.90582) (xy 63.880537 59.795506) (xy 63.801185 59.698815)
(xy 63.704494 59.619463) (xy 63.59418 59.560498) (xy 63.474482 59.524188) (xy 63.35 59.511928) (xy 62.78575 59.515)
(xy 62.627 59.67375) (xy 62.373 59.67375) (xy 62.21425 59.515) (xy 61.65 59.511928) (xy 61.525518 59.524188)
(xy 61.40582 59.560498) (xy 61.295506 59.619463) (xy 61.198815 59.698815) (xy 61.119463 59.795506) (xy 61.060498 59.90582)
(xy 61.024188 60.025518) (xy 61.011928 60.15) (xy 61.013112 60.367553) (xy 60.913073 60.217833) (xy 60.742167 60.046927)
(xy 60.637 59.976657) (xy 60.637 54.594259) (xy 60.640274 54.561017) (xy 60.637 54.527775) (xy 60.637 54.527766)
(xy 60.627204 54.428303) (xy 60.588492 54.300688) (xy 60.525628 54.183077) (xy 60.441026 54.079991) (xy 60.4152 54.058796)
(xy 57.901218 51.544814) (xy 57.880019 51.518983) (xy 57.776933 51.434382) (xy 57.763122 51.427) (xy 58.219578 51.427)
(xy 62.823001 56.030424) (xy 62.823 57.335369) (xy 62.819726 57.368614) (xy 62.823 57.401859) (xy 62.823 57.401865)
(xy 62.832796 57.501328) (xy 62.871508 57.628943) (xy 62.934372 57.746554) (xy 63.018973 57.84964) (xy 63.0448 57.870836)
(xy 68.75416 63.580196) (xy 68.775359 63.606027) (xy 68.878445 63.690628) (xy 68.996056 63.753492) (xy 69.123671 63.792204)
(xy 69.223134 63.802) (xy 69.223143 63.802) (xy 69.256385 63.805274) (xy 69.289627 63.802) (xy 72.28869 63.802)
(xy 72.326693 63.848307) (xy 72.420089 63.924955) (xy 72.526643 63.981909) (xy 72.58628 64) (xy 72.526643 64.018091)
(xy 72.420089 64.075045) (xy 72.326693 64.151693) (xy 72.250045 64.245089) (xy 72.193091 64.351643) (xy 72.158018 64.467261)
(xy 72.146176 64.5875) (xy 72.146176 64.668514) (xy 72.135691 64.703078) (xy 72.123001 64.831921) (xy 72.123 66.150113)
(xy 72.025644 66.202152) (xy 72.00024 66.223) (xy 70.418076 66.223) (xy 70.374999 66.218757) (xy 70.331922 66.223)
(xy 70.331921 66.223) (xy 70.203078 66.23569) (xy 70.037763 66.285838) (xy 69.885408 66.367273) (xy 69.751867 66.476867)
(xy 69.724403 66.510332) (xy 69.349406 66.885329) (xy 69.267274 66.985408) (xy 69.185838 67.137764) (xy 69.13569 67.303078)
(xy 69.12708 67.390497) (xy 66.261095 70.256483) (xy 66.142097 70.280153) (xy 65.918798 70.372647) (xy 65.717833 70.506927)
(xy 65.546927 70.677833) (xy 65.412647 70.878798) (xy 65.320153 71.102097) (xy 65.273 71.339151) (xy 65.273 71.580849)
(xy 65.320153 71.817903) (xy 65.412647 72.041202) (xy 65.546927 72.242167) (xy 65.717833 72.413073) (xy 65.918798 72.547353)
(xy 66.142097 72.639847) (xy 66.379151 72.687) (xy 66.620849 72.687) (xy 66.857903 72.639847) (xy 67.081202 72.547353)
(xy 67.282167 72.413073) (xy 67.453073 72.242167) (xy 67.587353 72.041202) (xy 67.679847 71.817903) (xy 67.727 71.580849)
(xy 67.727 71.339151) (xy 67.679847 71.102097) (xy 67.587353 70.878798) (xy 67.573843 70.858579) (xy 69.773001 68.659422)
(xy 69.773 71.721176) (xy 69.7 71.721176) (xy 69.626095 71.728455) (xy 69.55503 71.750012) (xy 69.489537 71.785019)
(xy 69.432131 71.832131) (xy 69.385019 71.889537) (xy 69.350012 71.95503) (xy 69.328455 72.026095) (xy 69.321176 72.1)
(xy 69.321176 74.1) (xy 69.328455 74.173905) (xy 69.350012 74.24497) (xy 69.385019 74.310463) (xy 69.432131 74.367869)
(xy 69.489537 74.414981) (xy 69.55503 74.449988) (xy 69.626095 74.471545) (xy 69.7 74.478824) (xy 71.2 74.478824)
(xy 71.273905 74.471545) (xy 71.34497 74.449988) (xy 71.410463 74.414981) (xy 71.467869 74.367869) (xy 71.514981 74.310463)
(xy 71.549988 74.24497) (xy 71.571545 74.173905) (xy 71.578824 74.1) (xy 71.578824 72.1) (xy 71.571545 72.026095)
(xy 71.549988 71.95503) (xy 71.514981 71.889537) (xy 71.467869 71.832131) (xy 71.410463 71.785019) (xy 71.34497 71.750012)
(xy 71.273905 71.728455) (xy 71.2 71.721176) (xy 71.127 71.721176) (xy 71.127 70.525) (xy 71.486928 70.525)
(xy 71.499188 70.649482) (xy 71.535498 70.76918) (xy 71.594463 70.879494) (xy 71.673815 70.976185) (xy 71.770506 71.055537)
(xy 71.88082 71.114502) (xy 72.000518 71.150812) (xy 72.125 71.163072) (xy 72.71425 71.16) (xy 72.873 71.00125)
(xy 72.873 70.027) (xy 73.127 70.027) (xy 73.127 71.00125) (xy 73.28575 71.16) (xy 73.875 71.163072)
(xy 73.999482 71.150812) (xy 74.11918 71.114502) (xy 74.229494 71.055537) (xy 74.326185 70.976185) (xy 74.405537 70.879494)
(xy 74.464502 70.76918) (xy 74.500812 70.649482) (xy 74.513072 70.525) (xy 74.51 70.18575) (xy 74.35125 70.027)
(xy 73.127 70.027) (xy 72.873 70.027) (xy 71.64875 70.027) (xy 71.49 70.18575) (xy 71.486928 70.525)
(xy 71.127 70.525) (xy 71.127 69.275) (xy 71.486928 69.275) (xy 71.49 69.61425) (xy 71.64875 69.773)
(xy 72.873 69.773) (xy 72.873 68.79875) (xy 73.127 68.79875) (xy 73.127 69.773) (xy 74.35125 69.773)
(xy 74.51 69.61425) (xy 74.513072 69.275) (xy 74.500812 69.150518) (xy 74.485488 69.1) (xy 74.981928 69.1)
(xy 74.985 69.91425) (xy 75.14375 70.073) (xy 76.093 70.073) (xy 76.093 68.62375) (xy 76.347 68.62375)
(xy 76.347 70.073) (xy 77.29625 70.073) (xy 77.455 69.91425) (xy 77.458072 69.1) (xy 77.445812 68.975518)
(xy 77.409502 68.85582) (xy 77.350537 68.745506) (xy 77.271185 68.648815) (xy 77.174494 68.569463) (xy 77.06418 68.510498)
(xy 76.944482 68.474188) (xy 76.82 68.461928) (xy 76.50575 68.465) (xy 76.347 68.62375) (xy 76.093 68.62375)
(xy 75.93425 68.465) (xy 75.62 68.461928) (xy 75.495518 68.474188) (xy 75.37582 68.510498) (xy 75.265506 68.569463)
(xy 75.168815 68.648815) (xy 75.089463 68.745506) (xy 75.030498 68.85582) (xy 74.994188 68.975518) (xy 74.981928 69.1)
(xy 74.485488 69.1) (xy 74.464502 69.03082) (xy 74.405537 68.920506) (xy 74.326185 68.823815) (xy 74.229494 68.744463)
(xy 74.11918 68.685498) (xy 73.999482 68.649188) (xy 73.875 68.636928) (xy 73.28575 68.64) (xy 73.127 68.79875)
(xy 72.873 68.79875) (xy 72.71425 68.64) (xy 72.125 68.636928) (xy 72.000518 68.649188) (xy 71.88082 68.685498)
(xy 71.770506 68.744463) (xy 71.673815 68.823815) (xy 71.594463 68.920506) (xy 71.535498 69.03082) (xy 71.499188 69.150518)
(xy 71.486928 69.275) (xy 71.127 69.275) (xy 71.127 67.983252) (xy 71.127616 67.977) (xy 72.00024 67.977)
(xy 72.025644 67.997848) (xy 72.134359 68.055958) (xy 72.252323 68.091741) (xy 72.375 68.103824) (xy 73.625 68.103824)
(xy 73.747677 68.091741) (xy 73.865641 68.055958) (xy 73.974356 67.997848) (xy 74.069646 67.919646) (xy 74.147848 67.824356)
(xy 74.205958 67.715641) (xy 74.241741 67.597677) (xy 74.253824 67.475) (xy 74.253824 66.725) (xy 74.241741 66.602323)
(xy 74.205958 66.484359) (xy 74.147848 66.375644) (xy 74.069646 66.280354) (xy 73.974356 66.202152) (xy 73.877 66.150114)
(xy 73.877 64.831921) (xy 73.86431 64.703078) (xy 73.853824 64.66851) (xy 73.853824 64.5875) (xy 73.841982 64.467261)
(xy 73.806909 64.351643) (xy 73.749955 64.245089) (xy 73.673307 64.151693) (xy 73.579911 64.075045) (xy 73.473357 64.018091)
(xy 73.420313 64.002) (xy 75.221176 64.002) (xy 75.221176 67.1) (xy 75.228455 67.173905) (xy 75.250012 67.24497)
(xy 75.285019 67.310463) (xy 75.332131 67.367869) (xy 75.389537 67.414981) (xy 75.45503 67.449988) (xy 75.526095 67.471545)
(xy 75.6 67.478824) (xy 81.4 67.478824) (xy 81.473905 67.471545) (xy 81.54497 67.449988) (xy 81.610463 67.414981)
(xy 81.667869 67.367869) (xy 81.714981 67.310463) (xy 81.749988 67.24497) (xy 81.771545 67.173905) (xy 81.778824 67.1)
(xy 81.778824 60.7) (xy 81.771545 60.626095) (xy 81.749988 60.55503) (xy 81.714981 60.489537) (xy 81.667869 60.432131)
(xy 81.610463 60.385019) (xy 81.54497 60.350012) (xy 81.473905 60.328455) (xy 81.4 60.321176) (xy 79.377 60.321176)
(xy 79.377 57.150263) (xy 79.440641 57.130958) (xy 79.549356 57.072848) (xy 79.644646 56.994646) (xy 79.722848 56.899356)
(xy 79.780958 56.790641) (xy 79.816741 56.672677) (xy 79.828824 56.55) (xy 79.828824 55.45) (xy 79.816741 55.327323)
(xy 79.780958 55.209359) (xy 79.722848 55.100644) (xy 79.644646 55.005354) (xy 79.549356 54.927152) (xy 79.440641 54.869042)
(xy 79.322677 54.833259) (xy 79.2 54.821176) (xy 76.925 54.821176) (xy 76.802323 54.833259) (xy 76.684359 54.869042)
(xy 76.575644 54.927152) (xy 76.480354 55.005354) (xy 76.402152 55.100644) (xy 76.344042 55.209359) (xy 76.308259 55.327323)
(xy 76.296176 55.45) (xy 76.296176 56.55) (xy 76.308259 56.672677) (xy 76.344042 56.790641) (xy 76.402152 56.899356)
(xy 76.480354 56.994646) (xy 76.575644 57.072848) (xy 76.684359 57.130958) (xy 76.802323 57.166741) (xy 76.925 57.178824)
(xy 77.623001 57.178824) (xy 77.623 60.321176) (xy 75.6 60.321176) (xy 75.526095 60.328455) (xy 75.45503 60.350012)
(xy 75.389537 60.385019) (xy 75.332131 60.432131) (xy 75.285019 60.489537) (xy 75.250012 60.55503) (xy 75.228455 60.626095)
(xy 75.221176 60.7) (xy 75.221176 62.248) (xy 73.407127 62.248) (xy 73.357739 62.233018) (xy 73.2375 62.221176)
(xy 72.7625 62.221176) (xy 72.642261 62.233018) (xy 72.526643 62.268091) (xy 72.420089 62.325045) (xy 72.326693 62.401693)
(xy 72.28869 62.448) (xy 69.536808 62.448) (xy 64.177 57.088192) (xy 64.177 56.8) (xy 71.911928 56.8)
(xy 71.924188 56.924482) (xy 71.960498 57.04418) (xy 72.019463 57.154494) (xy 72.098815 57.251185) (xy 72.195506 57.330537)
(xy 72.30582 57.389502) (xy 72.425518 57.425812) (xy 72.55 57.438072) (xy 73.65175 57.435) (xy 73.8105 57.27625)
(xy 73.8105 56.127) (xy 74.0645 56.127) (xy 74.0645 57.27625) (xy 74.22325 57.435) (xy 75.325 57.438072)
(xy 75.449482 57.425812) (xy 75.56918 57.389502) (xy 75.679494 57.330537) (xy 75.776185 57.251185) (xy 75.855537 57.154494)
(xy 75.914502 57.04418) (xy 75.950812 56.924482) (xy 75.963072 56.8) (xy 75.96 56.28575) (xy 75.80125 56.127)
(xy 74.0645 56.127) (xy 73.8105 56.127) (xy 72.07375 56.127) (xy 71.915 56.28575) (xy 71.911928 56.8)
(xy 64.177 56.8) (xy 64.177 55.783252) (xy 64.180275 55.75) (xy 64.167204 55.617285) (xy 64.128492 55.48967)
(xy 64.065628 55.372059) (xy 64.002224 55.294801) (xy 64.002222 55.294799) (xy 63.981027 55.268973) (xy 63.955201 55.247778)
(xy 63.907423 55.2) (xy 71.911928 55.2) (xy 71.915 55.71425) (xy 72.07375 55.873) (xy 73.8105 55.873)
(xy 73.8105 54.72375) (xy 74.0645 54.72375) (xy 74.0645 55.873) (xy 75.80125 55.873) (xy 75.96 55.71425)
(xy 75.963072 55.2) (xy 75.950812 55.075518) (xy 75.914502 54.95582) (xy 75.855537 54.845506) (xy 75.776185 54.748815)
(xy 75.679494 54.669463) (xy 75.56918 54.610498) (xy 75.449482 54.574188) (xy 75.325 54.561928) (xy 74.22325 54.565)
(xy 74.0645 54.72375) (xy 73.8105 54.72375) (xy 73.65175 54.565) (xy 72.55 54.561928) (xy 72.425518 54.574188)
(xy 72.30582 54.610498) (xy 72.195506 54.669463) (xy 72.098815 54.748815) (xy 72.019463 54.845506) (xy 71.960498 54.95582)
(xy 71.924188 55.075518) (xy 71.911928 55.2) (xy 63.907423 55.2) (xy 59.002224 50.294802) (xy 58.981027 50.268973)
(xy 58.877941 50.184372) (xy 58.76033 50.121508) (xy 58.632715 50.082796) (xy 58.533252 50.073) (xy 58.533245 50.073)
(xy 58.5 50.069726) (xy 58.466755 50.073) (xy 53.628824 50.073) (xy 53.628824 50) (xy 53.621545 49.926095)
(xy 53.599988 49.85503) (xy 53.564981 49.789537) (xy 53.517869 49.732131) (xy 53.460463 49.685019) (xy 53.39497 49.650012)
(xy 53.323905 49.628455) (xy 53.25 49.621176) (xy 52.25 49.621176) (xy 52.175707 49.628533) (xy 52.104664 49.650164)
(xy 52.099965 49.652682) (xy 52.09497 49.650012) (xy 52.023905 49.628455) (xy 51.95 49.621176) (xy 49.55 49.621176)
(xy 49.476484 49.628378) (xy 49.405397 49.649861) (xy 49.400035 49.65272) (xy 49.39497 49.650012) (xy 49.323905 49.628455)
(xy 49.25 49.621176) (xy 48.25 49.621176) (xy 48.176095 49.628455) (xy 48.10503 49.650012) (xy 48.039537 49.685019)
(xy 47.982131 49.732131) (xy 47.935019 49.789537) (xy 47.900012 49.85503) (xy 47.878455 49.926095) (xy 47.871176 50)
(xy 47.871176 50.073) (xy 40.353824 50.073) (xy 40.353824 50.06875) (xy 40.342342 49.952169) (xy 40.308336 49.840068)
(xy 40.253115 49.736756) (xy 40.244334 49.726057) (xy 40.329494 49.680537) (xy 40.426185 49.601185) (xy 40.505537 49.504494)
(xy 40.564502 49.39418) (xy 40.600812 49.274482) (xy 40.613072 49.15) (xy 40.61 48.99825) (xy 40.45125 48.8395)
(xy 39.627 48.8395) (xy 39.627 48.8595) (xy 39.373 48.8595) (xy 39.373 48.8395) (xy 38.54875 48.8395)
(xy 38.39 48.99825) (xy 38.386928 49.15) (xy 38.399188 49.274482) (xy 38.435498 49.39418) (xy 38.444221 49.4105)
(xy 38.278824 49.4105) (xy 38.278824 48.275) (xy 38.386928 48.275) (xy 38.39 48.42675) (xy 38.54875 48.5855)
(xy 39.373 48.5855) (xy 39.373 47.79875) (xy 39.627 47.79875) (xy 39.627 48.5855) (xy 40.45125 48.5855)
(xy 40.61 48.42675) (xy 40.613072 48.275) (xy 40.600812 48.150518) (xy 40.564502 48.03082) (xy 40.505537 47.920506)
(xy 40.426185 47.823815) (xy 40.329494 47.744463) (xy 40.21918 47.685498) (xy 40.099482 47.649188) (xy 39.975 47.636928)
(xy 39.78575 47.64) (xy 39.627 47.79875) (xy 39.373 47.79875) (xy 39.21425 47.64) (xy 39.025 47.636928)
(xy 38.900518 47.649188) (xy 38.78082 47.685498) (xy 38.670506 47.744463) (xy 38.573815 47.823815) (xy 38.494463 47.920506)
(xy 38.435498 48.03082) (xy 38.399188 48.150518) (xy 38.386928 48.275) (xy 38.278824 48.275) (xy 38.278824 47.9)
(xy 38.271545 47.826095) (xy 38.249988 47.75503) (xy 38.214981 47.689537) (xy 38.167869 47.632131) (xy 38.110463 47.585019)
(xy 38.04497 47.550012) (xy 37.973905 47.528455) (xy 37.9 47.521176) (xy 34.510978 47.521176) (xy 34.516579 47.516579)
(xy 34.563464 47.45945) (xy 34.598303 47.394272) (xy 34.619756 47.323549) (xy 34.627 47.25) (xy 34.627 45.9)
(xy 36.041928 45.9) (xy 36.054188 46.024482) (xy 36.090498 46.14418) (xy 36.149463 46.254494) (xy 36.228815 46.351185)
(xy 36.325506 46.430537) (xy 36.43582 46.489502) (xy 36.555518 46.525812) (xy 36.68 46.538072) (xy 36.99425 46.535)
(xy 37.153 46.37625) (xy 37.153 44.927) (xy 37.407 44.927) (xy 37.407 46.37625) (xy 37.56575 46.535)
(xy 37.88 46.538072) (xy 38.004482 46.525812) (xy 38.12418 46.489502) (xy 38.234494 46.430537) (xy 38.331185 46.351185)
(xy 38.410537 46.254494) (xy 38.469502 46.14418) (xy 38.505812 46.024482) (xy 38.518072 45.9) (xy 38.515 45.08575)
(xy 38.35625 44.927) (xy 37.407 44.927) (xy 37.153 44.927) (xy 36.20375 44.927) (xy 36.045 45.08575)
(xy 36.041928 45.9) (xy 34.627 45.9) (xy 34.627 43.7) (xy 36.041928 43.7) (xy 36.045 44.51425)
(xy 36.20375 44.673) (xy 37.153 44.673) (xy 37.153 43.22375) (xy 37.407 43.22375) (xy 37.407 44.673)
(xy 38.35625 44.673) (xy 38.515 44.51425) (xy 38.518072 43.7) (xy 38.505812 43.575518) (xy 38.469502 43.45582)
(xy 38.410537 43.345506) (xy 38.331185 43.248815) (xy 38.234494 43.169463) (xy 38.12418 43.110498) (xy 38.004482 43.074188)
(xy 37.88 43.061928) (xy 37.56575 43.065) (xy 37.407 43.22375) (xy 37.153 43.22375) (xy 36.99425 43.065)
(xy 36.68 43.061928) (xy 36.555518 43.074188) (xy 36.43582 43.110498) (xy 36.325506 43.169463) (xy 36.228815 43.248815)
(xy 36.149463 43.345506) (xy 36.090498 43.45582) (xy 36.054188 43.575518) (xy 36.041928 43.7) (xy 34.627 43.7)
(xy 34.627 42.877) (xy 47.5 42.877) (xy 47.573549 42.869756) (xy 47.644272 42.848303) (xy 47.70945 42.813464)
(xy 47.766579 42.766579) (xy 47.813464 42.70945) (xy 47.848303 42.644272) (xy 47.869756 42.573549) (xy 47.877 42.5)
(xy 47.877 40.364377) (xy 49.203 40.364377) (xy 49.203 40.635623) (xy 49.255917 40.901656) (xy 49.359718 41.152254)
(xy 49.510414 41.377787) (xy 49.702213 41.569586) (xy 49.927746 41.720282) (xy 50.178344 41.824083) (xy 50.444377 41.877)
(xy 50.715623 41.877) (xy 50.981656 41.824083) (xy 51.232254 41.720282) (xy 51.457787 41.569586) (xy 51.649586 41.377787)
(xy 51.650112 41.377) (xy 58.929888 41.377) (xy 58.930414 41.377787) (xy 59.122213 41.569586) (xy 59.347746 41.720282)
(xy 59.598344 41.824083) (xy 59.864377 41.877) (xy 60.135623 41.877) (xy 60.401656 41.824083) (xy 60.652254 41.720282)
(xy 60.877787 41.569586) (xy 61.069586 41.377787) (xy 61.220282 41.152254) (xy 61.324083 40.901656) (xy 61.377 40.635623)
(xy 61.377 40.364377) (xy 61.324083 40.098344) (xy 61.220282 39.847746) (xy 61.069586 39.622213) (xy 60.877787 39.430414)
(xy 60.652254 39.279718) (xy 60.401656 39.175917) (xy 60.135623 39.123) (xy 59.864377 39.123) (xy 59.598344 39.175917)
(xy 59.347746 39.279718) (xy 59.122213 39.430414) (xy 58.930414 39.622213) (xy 58.929888 39.623) (xy 51.650112 39.623)
(xy 51.649586 39.622213) (xy 51.457787 39.430414) (xy 51.232254 39.279718) (xy 50.981656 39.175917) (xy 50.715623 39.123)
(xy 50.444377 39.123) (xy 50.178344 39.175917) (xy 49.927746 39.279718) (xy 49.702213 39.430414) (xy 49.510414 39.622213)
(xy 49.359718 39.847746) (xy 49.255917 40.098344) (xy 49.203 40.364377) (xy 47.877 40.364377) (xy 47.877 38.25)
(xy 47.869756 38.176451) (xy 47.848303 38.105728) (xy 47.813464 38.04055) (xy 47.766579 37.983421) (xy 47.70945 37.936536)
(xy 47.644272 37.901697) (xy 47.573549 37.880244) (xy 47.5 37.873) (xy 37.422238 37.873) (xy 37.616292 37.803603)
(xy 37.741514 37.736671) (xy 37.813097 37.492702) (xy 37 36.679605) (xy 36.186903 37.492702) (xy 36.258486 37.736671)
(xy 36.513996 37.857571) (xy 36.575549 37.873) (xy 26.922238 37.873) (xy 27.116292 37.803603) (xy 27.241514 37.736671)
(xy 27.313097 37.492702) (xy 26.5 36.679605) (xy 25.686903 37.492702) (xy 25.758486 37.736671) (xy 26.013996 37.857571)
(xy 26.075549 37.873) (xy 23.877 37.873) (xy 23.877 36.570512) (xy 25.059783 36.570512) (xy 25.101213 36.85013)
(xy 25.196397 37.116292) (xy 25.263329 37.241514) (xy 25.507298 37.313097) (xy 26.320395 36.5) (xy 26.679605 36.5)
(xy 27.492702 37.313097) (xy 27.736671 37.241514) (xy 27.857571 36.986004) (xy 27.9263 36.711816) (xy 27.933265 36.570512)
(xy 35.559783 36.570512) (xy 35.601213 36.85013) (xy 35.696397 37.116292) (xy 35.763329 37.241514) (xy 36.007298 37.313097)
(xy 36.820395 36.5) (xy 37.179605 36.5) (xy 37.992702 37.313097) (xy 38.236671 37.241514) (xy 38.357571 36.986004)
(xy 38.4263 36.711816) (xy 38.440217 36.429488) (xy 38.398787 36.14987) (xy 38.303603 35.883708) (xy 38.236671 35.758486)
(xy 37.992702 35.686903) (xy 37.179605 36.5) (xy 36.820395 36.5) (xy 36.007298 35.686903) (xy 35.763329 35.758486)
(xy 35.642429 36.013996) (xy 35.5737 36.288184) (xy 35.559783 36.570512) (xy 27.933265 36.570512) (xy 27.940217 36.429488)
(xy 27.898787 36.14987) (xy 27.803603 35.883708) (xy 27.736671 35.758486) (xy 27.492702 35.686903) (xy 26.679605 36.5)
(xy 26.320395 36.5) (xy 25.507298 35.686903) (xy 25.263329 35.758486) (xy 25.142429 36.013996) (xy 25.0737 36.288184)
(xy 25.059783 36.570512) (xy 23.877 36.570512) (xy 23.877 35.507298) (xy 25.686903 35.507298) (xy 26.5 36.320395)
(xy 27.313097 35.507298) (xy 36.186903 35.507298) (xy 37 36.320395) (xy 37.813097 35.507298) (xy 37.741514 35.263329)
(xy 37.486004 35.142429) (xy 37.211816 35.0737) (xy 36.929488 35.059783) (xy 36.64987 35.101213) (xy 36.383708 35.196397)
(xy 36.258486 35.263329) (xy 36.186903 35.507298) (xy 27.313097 35.507298) (xy 27.241514 35.263329) (xy 26.986004 35.142429)
(xy 26.711816 35.0737) (xy 26.429488 35.059783) (xy 26.14987 35.101213) (xy 25.883708 35.196397) (xy 25.758486 35.263329)
(xy 25.686903 35.507298) (xy 23.877 35.507298) (xy 23.877 31.863265) (xy 24.011441 31.728824) (xy 24.85 31.728824)
(xy 24.923905 31.721545) (xy 24.99497 31.699988) (xy 25.060463 31.664981) (xy 25.117869 31.617869) (xy 25.164981 31.560463)
(xy 25.199988 31.49497) (xy 25.221545 31.423905) (xy 25.228824 31.35) (xy 25.228824 31.18662) (xy 25.344822 31.381355)
(xy 25.539731 31.597588) (xy 25.77308 31.771641) (xy 26.035901 31.896825) (xy 26.18311 31.941476) (xy 26.413 31.820155)
(xy 26.413 30.627) (xy 26.667 30.627) (xy 26.667 31.820155) (xy 26.89689 31.941476) (xy 27.044099 31.896825)
(xy 27.30692 31.771641) (xy 27.540269 31.597588) (xy 27.735178 31.381355) (xy 27.884157 31.131252) (xy 27.981481 30.856891)
(xy 27.860814 30.627) (xy 26.667 30.627) (xy 26.413 30.627) (xy 26.393 30.627) (xy 26.393 30.373)
(xy 26.413 30.373) (xy 26.413 29.179845) (xy 26.667 29.179845) (xy 26.667 30.373) (xy 27.860814 30.373)
(xy 27.981481 30.143109) (xy 27.884157 29.868748) (xy 27.735178 29.618645) (xy 27.540269 29.402412) (xy 27.30692 29.228359)
(xy 27.044099 29.103175) (xy 26.89689 29.058524) (xy 26.667 29.179845) (xy 26.413 29.179845) (xy 26.18311 29.058524)
(xy 26.035901 29.103175) (xy 25.77308 29.228359) (xy 25.539731 29.402412) (xy 25.344822 29.618645) (xy 25.228824 29.81338)
(xy 25.228824 29.65) (xy 25.221545 29.576095) (xy 25.199988 29.50503) (xy 25.164981 29.439537) (xy 25.117869 29.382131)
(xy 25.060463 29.335019) (xy 24.99497 29.300012) (xy 24.923905 29.278455) (xy 24.85 29.271176) (xy 23.15 29.271176)
(xy 23.076095 29.278455) (xy 23.00503 29.300012) (xy 22.939537 29.335019) (xy 22.882131 29.382131) (xy 22.835019 29.439537)
(xy 22.800012 29.50503) (xy 22.778455 29.576095) (xy 22.771176 29.65) (xy 22.771176 30.488559) (xy 22.410327 30.849408)
(xy 22.376868 30.876867) (xy 22.349409 30.910326) (xy 22.349406 30.910329) (xy 22.267274 31.010408) (xy 22.185838 31.162764)
(xy 22.13569 31.328078) (xy 22.118757 31.5) (xy 22.123001 31.54309) (xy 22.123 37.873) (xy 22 37.873)
(xy 21.926451 37.880244) (xy 21.855728 37.901697) (xy 21.79055 37.936536) (xy 21.733421 37.983421) (xy 21.686536 38.04055)
(xy 21.651697 38.105728) (xy 21.630244 38.176451) (xy 21.623 38.25) (xy 21.623 42.5) (xy 21.630244 42.573549)
(xy 21.651697 42.644272) (xy 21.686536 42.70945) (xy 21.733421 42.766579) (xy 21.79055 42.813464) (xy 21.855728 42.848303)
(xy 21.926451 42.869756) (xy 22 42.877) (xy 30.623 42.877) (xy 30.623 45.656735) (xy 30.594235 45.6855)
(xy 29.456921 45.6855) (xy 29.348526 45.696176) (xy 29.04375 45.696176) (xy 28.922292 45.708139) (xy 28.805501 45.743567)
(xy 28.697866 45.801099) (xy 28.603524 45.878524) (xy 28.526099 45.972866) (xy 28.468567 46.080501) (xy 28.433139 46.197292)
(xy 28.421176 46.31875) (xy 28.421176 46.80625) (xy 28.433139 46.927708) (xy 28.468567 47.044499) (xy 28.526099 47.152134)
(xy 28.603524 47.246476) (xy 28.695784 47.322192) (xy 28.675518 47.324188) (xy 28.55582 47.360498) (xy 28.445506 47.419463)
(xy 28.348815 47.498815) (xy 28.269463 47.595506) (xy 28.210498 47.70582) (xy 28.174188 47.825518) (xy 28.161928 47.95)
(xy 28.165 48.15175) (xy 28.32375 48.3105) (xy 29.373 48.3105) (xy 29.373 48.2905) (xy 29.627 48.2905)
(xy 29.627 48.3105) (xy 30.67625 48.3105) (xy 30.835 48.15175) (xy 30.838072 47.95) (xy 30.825812 47.825518)
(xy 30.789502 47.70582) (xy 30.730537 47.595506) (xy 30.651185 47.498815) (xy 30.578909 47.4395) (xy 30.675872 47.4395)
(xy 30.686536 47.45945) (xy 30.733421 47.516579) (xy 30.79055 47.563464) (xy 30.855728 47.598303) (xy 30.926451 47.619756)
(xy 31 47.627) (xy 31.838383 47.627) (xy 31.832131 47.632131) (xy 31.785019 47.689537) (xy 31.750012 47.75503)
(xy 31.728455 47.826095) (xy 31.721176 47.9) (xy 31.721176 54.3) (xy 31.728455 54.373905) (xy 31.750012 54.44497)
(xy 31.785019 54.510463) (xy 31.832131 54.567869) (xy 31.889537 54.614981) (xy 31.95503 54.649988) (xy 32.026095 54.671545)
(xy 32.1 54.678824) (xy 33.08091 54.678824) (xy 20.410327 67.349408) (xy 20.376868 67.376867) (xy 20.349409 67.410326)
(xy 20.349406 67.410329) (xy 20.267274 67.510408) (xy 20.185838 67.662764) (xy 20.13569 67.828078) (xy 20.118757 68)
(xy 20.123001 68.043089) (xy 20.123 73.043078) (xy 20.123001 73.043088) (xy 20.123 75.5944) (xy 19.850148 75.5944)
(xy 19.750685 75.604196) (xy 19.62307 75.642908) (xy 19.505459 75.705772) (xy 19.402373 75.790373) (xy 19.317772 75.893459)
(xy 19.254908 76.01107) (xy 19.216196 76.138685) (xy 19.203125 76.2714) (xy 19.216196 76.404115) (xy 19.254908 76.53173)
(xy 19.317772 76.649341) (xy 19.402373 76.752427) (xy 19.505459 76.837028) (xy 19.62307 76.899892) (xy 19.750685 76.938604)
(xy 19.850148 76.9484) (xy 20.123 76.9484) (xy 20.123 77.26872) (xy 20.118757 77.3118) (xy 20.13569 77.483722)
(xy 20.149592 77.529549) (xy 20.185838 77.649036) (xy 20.267273 77.801391) (xy 20.376867 77.934933) (xy 20.410332 77.962397)
(xy 21.287603 78.839668) (xy 21.315067 78.873133) (xy 21.448608 78.982727) (xy 21.600963 79.064162) (xy 21.766278 79.11431)
(xy 21.895121 79.127) (xy 21.895122 79.127) (xy 21.938199 79.131243) (xy 21.981276 79.127) (xy 27.636735 79.127)
(xy 27.973344 79.463609) (xy 27.78575 79.465) (xy 27.627 79.62375) (xy 27.627 80.773) (xy 28.67625 80.773)
(xy 28.835 80.61425) (xy 28.836716 80.326981) (xy 31.199403 82.689668) (xy 31.226867 82.723133) (xy 31.360408 82.832727)
(xy 31.512763 82.914162) (xy 31.678078 82.96431) (xy 31.806921 82.977) (xy 31.80693 82.977) (xy 31.849999 82.981242)
(xy 31.893069 82.977) (xy 35.55024 82.977) (xy 35.575644 82.997848) (xy 35.684359 83.055958) (xy 35.802323 83.091741)
(xy 35.925 83.103824) (xy 37.373929 83.103824) (xy 37.426451 83.119756) (xy 37.5 83.127) (xy 38.573 83.127)
(xy 38.573 83.466747) (xy 38.569725 83.5) (xy 38.573001 83.533262) (xy 38.573001 83.68754) (xy 38.56918 83.685498)
(xy 38.449482 83.649188) (xy 38.325 83.636928) (xy 37.28575 83.64) (xy 37.127 83.79875) (xy 37.127 84.773)
(xy 37.147 84.773) (xy 37.147 85.027) (xy 37.127 85.027) (xy 37.127 86.00125) (xy 37.28575 86.16)
(xy 38.325 86.163072) (xy 38.449482 86.150812) (xy 38.56918 86.114502) (xy 38.679494 86.055537) (xy 38.776185 85.976185)
(xy 38.855537 85.879494) (xy 38.914502 85.76918) (xy 38.950812 85.649482) (xy 38.963072 85.525) (xy 38.96 85.18575)
(xy 38.879879 85.105629) (xy 38.926451 85.119756) (xy 38.983915 85.125416) (xy 38.98967 85.128492) (xy 39.117285 85.167204)
(xy 39.25 85.180275) (xy 39.283252 85.177) (xy 40.216748 85.177) (xy 40.25 85.180275) (xy 40.283252 85.177)
(xy 41.219578 85.177) (xy 41.544801 85.502224) (xy 41.622059 85.565628) (xy 41.73967 85.628492) (xy 41.867285 85.667204)
(xy 41.927882 85.673172) (xy 41.971176 85.716466) (xy 41.971176 87.05) (xy 41.979896 87.138537) (xy 42.005721 87.223671)
(xy 42.047659 87.302131) (xy 42.104098 87.370902) (xy 42.172869 87.427341) (xy 42.251329 87.469279) (xy 42.331844 87.493703)
(xy 42.392452 87.569731) (xy 42.488006 87.650449) (xy 42.597472 87.710974) (xy 42.716642 87.74898) (xy 42.81825 87.76)
(xy 42.977 87.60125) (xy 42.977 87.255998) (xy 42.994279 87.223671) (xy 43 87.204811) (xy 43.005721 87.223671)
(xy 43.023 87.255998) (xy 43.023 87.60125) (xy 43.18175 87.76) (xy 43.283358 87.74898) (xy 43.402528 87.710974)
(xy 43.511994 87.650449) (xy 43.607548 87.569731) (xy 43.668156 87.493703) (xy 43.748671 87.469279) (xy 43.75 87.468569)
(xy 43.751329 87.469279) (xy 43.836463 87.495104) (xy 43.925 87.503824) (xy 44.075 87.503824) (xy 44.163537 87.495104)
(xy 44.248671 87.469279) (xy 44.25 87.468569) (xy 44.251329 87.469279) (xy 44.336463 87.495104) (xy 44.425 87.503824)
(xy 44.575 87.503824) (xy 44.663537 87.495104) (xy 44.748671 87.469279) (xy 44.75 87.468569) (xy 44.751329 87.469279)
(xy 44.836463 87.495104) (xy 44.925 87.503824) (xy 45.075 87.503824) (xy 45.163537 87.495104) (xy 45.248671 87.469279)
(xy 45.25 87.468569) (xy 45.251329 87.469279) (xy 45.336463 87.495104) (xy 45.425 87.503824) (xy 45.575 87.503824)
(xy 45.663537 87.495104) (xy 45.748671 87.469279) (xy 45.75 87.468569) (xy 45.751329 87.469279) (xy 45.836463 87.495104)
(xy 45.925 87.503824) (xy 46.075 87.503824) (xy 46.163537 87.495104) (xy 46.248671 87.469279) (xy 46.25 87.468569)
(xy 46.251329 87.469279) (xy 46.336463 87.495104) (xy 46.425 87.503824) (xy 46.575 87.503824) (xy 46.663537 87.495104)
(xy 46.748671 87.469279) (xy 46.75 87.468569) (xy 46.751329 87.469279) (xy 46.836463 87.495104) (xy 46.875738 87.498972)
(xy 42.755655 91.619056) (xy 42.727673 91.647038) (xy 42.677111 91.657095) (xy 42.563004 91.70436) (xy 42.460311 91.772977)
(xy 42.372977 91.860311) (xy 42.30436 91.963004) (xy 42.257095 92.077111) (xy 42.233 92.198246) (xy 42.233 92.321754)
(xy 42.257095 92.442889) (xy 42.30436 92.556996) (xy 42.372977 92.659689) (xy 42.460311 92.747023) (xy 42.563004 92.81564)
(xy 42.677111 92.862905) (xy 42.798246 92.887) (xy 42.921754 92.887) (xy 43.042889 92.862905) (xy 43.156996 92.81564)
(xy 43.259689 92.747023) (xy 43.347023 92.659689) (xy 43.41564 92.556996) (xy 43.462905 92.442889) (xy 43.472962 92.392327)
(xy 43.500944 92.364345) (xy 47.854339 88.010951) (xy 47.874448 87.994448) (xy 47.940304 87.914202) (xy 47.989239 87.82265)
(xy 48.019374 87.72331) (xy 48.027 87.645881) (xy 48.029549 87.62) (xy 48.027 87.594119) (xy 48.027 87.503824)
(xy 48.075 87.503824) (xy 48.163537 87.495104) (xy 48.248671 87.469279) (xy 48.25 87.468569) (xy 48.251329 87.469279)
(xy 48.336463 87.495104) (xy 48.425 87.503824) (xy 48.575 87.503824) (xy 48.663537 87.495104) (xy 48.748671 87.469279)
(xy 48.75 87.468569) (xy 48.751329 87.469279) (xy 48.836463 87.495104) (xy 48.925 87.503824) (xy 49.075 87.503824)
(xy 49.163537 87.495104) (xy 49.248671 87.469279) (xy 49.25 87.468569) (xy 49.251329 87.469279) (xy 49.336463 87.495104)
(xy 49.425 87.503824) (xy 49.575 87.503824) (xy 49.663537 87.495104) (xy 49.748671 87.469279) (xy 49.75 87.468569)
(xy 49.751329 87.469279) (xy 49.836463 87.495104) (xy 49.925 87.503824) (xy 50.075 87.503824) (xy 50.163537 87.495104)
(xy 50.248671 87.469279) (xy 50.25 87.468569) (xy 50.251329 87.469279) (xy 50.336463 87.495104) (xy 50.425 87.503824)
(xy 50.575 87.503824) (xy 50.663537 87.495104) (xy 50.748671 87.469279) (xy 50.75 87.468569) (xy 50.751329 87.469279)
(xy 50.836463 87.495104) (xy 50.925 87.503824) (xy 51.075 87.503824) (xy 51.163537 87.495104) (xy 51.248671 87.469279)
(xy 51.25 87.468569) (xy 51.251329 87.469279) (xy 51.336463 87.495104) (xy 51.425 87.503824) (xy 51.575 87.503824)
(xy 51.663537 87.495104) (xy 51.748671 87.469279) (xy 51.75 87.468569) (xy 51.751329 87.469279) (xy 51.836463 87.495104)
(xy 51.925 87.503824) (xy 52.075 87.503824) (xy 52.163537 87.495104) (xy 52.248671 87.469279) (xy 52.25 87.468569)
(xy 52.251329 87.469279) (xy 52.336463 87.495104) (xy 52.425 87.503824) (xy 52.575 87.503824) (xy 52.663537 87.495104)
(xy 52.748671 87.469279) (xy 52.75 87.468569) (xy 52.751329 87.469279) (xy 52.836463 87.495104) (xy 52.925 87.503824)
(xy 53.075 87.503824) (xy 53.163537 87.495104) (xy 53.248671 87.469279) (xy 53.25 87.468569) (xy 53.251329 87.469279)
(xy 53.336463 87.495104) (xy 53.425 87.503824) (xy 53.575 87.503824) (xy 53.663537 87.495104) (xy 53.748671 87.469279)
(xy 53.75 87.468569) (xy 53.751329 87.469279) (xy 53.836463 87.495104) (xy 53.925 87.503824) (xy 54.075 87.503824)
(xy 54.163537 87.495104) (xy 54.248671 87.469279) (xy 54.25 87.468569) (xy 54.251329 87.469279) (xy 54.336463 87.495104)
(xy 54.425 87.503824) (xy 54.575 87.503824) (xy 54.663537 87.495104) (xy 54.748671 87.469279) (xy 54.827131 87.427341)
(xy 54.895902 87.370902) (xy 54.952341 87.302131) (xy 54.994279 87.223671) (xy 55.020104 87.138537) (xy 55.028824 87.05)
(xy 55.028824 85.6) (xy 55.020104 85.511463) (xy 54.994279 85.426329) (xy 54.952341 85.347869) (xy 54.895902 85.279098)
(xy 54.827131 85.222659) (xy 54.748671 85.180721) (xy 54.663537 85.154896) (xy 54.575 85.146176) (xy 54.425 85.146176)
(xy 54.336463 85.154896) (xy 54.251329 85.180721) (xy 54.25 85.181431) (xy 54.248671 85.180721) (xy 54.163537 85.154896)
(xy 54.075 85.146176) (xy 53.925 85.146176) (xy 53.836463 85.154896) (xy 53.751329 85.180721) (xy 53.75 85.181431)
(xy 53.748671 85.180721) (xy 53.663537 85.154896) (xy 53.575 85.146176) (xy 53.425 85.146176) (xy 53.336463 85.154896)
(xy 53.251329 85.180721) (xy 53.25 85.181431) (xy 53.248671 85.180721) (xy 53.163537 85.154896) (xy 53.075 85.146176)
(xy 53.027 85.146176) (xy 53.027 84.978289) (xy 55.134703 82.870587) (xy 55.147095 82.932889) (xy 55.19436 83.046996)
(xy 55.262977 83.149689) (xy 55.350311 83.237023) (xy 55.453004 83.30564) (xy 55.567111 83.352905) (xy 55.688246 83.377)
(xy 55.811754 83.377) (xy 55.932889 83.352905) (xy 56.046996 83.30564) (xy 56.089859 83.277) (xy 57.135264 83.277)
(xy 59.254588 85.396325) (xy 59.225518 85.399188) (xy 59.10582 85.435498) (xy 58.995506 85.494463) (xy 58.898815 85.573815)
(xy 58.819463 85.670506) (xy 58.773943 85.755666) (xy 58.763244 85.746885) (xy 58.659932 85.691664) (xy 58.547831 85.657658)
(xy 58.43125 85.646176) (xy 57.99375 85.646176) (xy 57.877169 85.657658) (xy 57.765068 85.691664) (xy 57.661756 85.746885)
(xy 57.571201 85.821201) (xy 57.496885 85.911756) (xy 57.441664 86.015068) (xy 57.437285 86.029503) (xy 57.380798 86.059696)
(xy 57.300552 86.125552) (xy 57.284049 86.145661) (xy 55.958535 87.471176) (xy 55.45 87.471176) (xy 55.43148 87.473)
(xy 55.088381 87.473) (xy 55.0625 87.470451) (xy 55.036619 87.473) (xy 54.95919 87.480626) (xy 54.85985 87.510761)
(xy 54.768298 87.559696) (xy 54.688052 87.625552) (xy 54.671553 87.645656) (xy 53.322482 88.994729) (xy 53.26033 88.961508)
(xy 53.132715 88.922796) (xy 53 88.909725) (xy 52.867285 88.922796) (xy 52.73967 88.961508) (xy 52.622059 89.024372)
(xy 52.544801 89.087776) (xy 50.542776 91.089802) (xy 50.542772 91.089807) (xy 50.244802 91.387776) (xy 50.107418 91.52516)
(xy 50.008773 91.544782) (xy 49.858269 91.607123) (xy 49.722819 91.697628) (xy 49.607628 91.812819) (xy 49.517123 91.948269)
(xy 49.454782 92.098773) (xy 49.423 92.258548) (xy 49.423 92.421452) (xy 49.454782 92.581227) (xy 49.517123 92.731731)
(xy 49.607628 92.867181) (xy 49.722819 92.982372) (xy 49.858269 93.072877) (xy 50.008773 93.135218) (xy 50.168548 93.167)
(xy 50.331452 93.167) (xy 50.491227 93.135218) (xy 50.641731 93.072877) (xy 50.777181 92.982372) (xy 50.892372 92.867181)
(xy 50.982877 92.731731) (xy 51.045218 92.581227) (xy 51.06484 92.482582) (xy 51.202224 92.345198) (xy 51.500193 92.047228)
(xy 51.500198 92.047224) (xy 53.430423 90.117) (xy 53.446619 90.117) (xy 53.4725 90.119549) (xy 53.498381 90.117)
(xy 53.57581 90.109374) (xy 53.67515 90.079239) (xy 53.766702 90.030304) (xy 53.846948 89.964448) (xy 53.863455 89.944334)
(xy 54.173928 89.633862) (xy 54.377598 89.837532) (xy 54.393316 89.856684) (xy 54.469755 89.919417) (xy 54.556964 89.966031)
(xy 54.651591 89.994736) (xy 54.725347 90.002) (xy 54.725356 90.002) (xy 54.749999 90.004427) (xy 54.774642 90.002)
(xy 54.996176 90.002) (xy 54.996176 90.075) (xy 55.004896 90.163537) (xy 55.030721 90.248671) (xy 55.031431 90.25)
(xy 55.030721 90.251329) (xy 55.004896 90.336463) (xy 54.996176 90.425) (xy 54.996176 90.575) (xy 55.004896 90.663537)
(xy 55.030721 90.748671) (xy 55.031431 90.75) (xy 55.030721 90.751329) (xy 55.004896 90.836463) (xy 54.996176 90.925)
(xy 54.996176 91.075) (xy 55.004896 91.163537) (xy 55.030721 91.248671) (xy 55.031431 91.25) (xy 55.030721 91.251329)
(xy 55.004896 91.336463) (xy 54.996176 91.425) (xy 54.996176 91.575) (xy 55.004896 91.663537) (xy 55.030721 91.748671)
(xy 55.031431 91.75) (xy 55.030721 91.751329) (xy 55.004896 91.836463) (xy 54.996176 91.925) (xy 54.996176 92.075)
(xy 55.004896 92.163537) (xy 55.030721 92.248671) (xy 55.031431 92.25) (xy 55.030721 92.251329) (xy 55.004896 92.336463)
(xy 54.996176 92.425) (xy 54.996176 92.575) (xy 55.004896 92.663537) (xy 55.030721 92.748671) (xy 55.031431 92.75)
(xy 55.030721 92.751329) (xy 55.004896 92.836463) (xy 54.996176 92.925) (xy 54.996176 93.075) (xy 55.004896 93.163537)
(xy 55.030721 93.248671) (xy 55.031431 93.25) (xy 55.030721 93.251329) (xy 55.004896 93.336463) (xy 54.996176 93.425)
(xy 54.996176 93.575) (xy 55.004896 93.663537) (xy 55.030721 93.748671) (xy 55.031431 93.75) (xy 55.030721 93.751329)
(xy 55.004896 93.836463) (xy 54.996176 93.925) (xy 54.996176 94.075) (xy 55.004896 94.163537) (xy 55.030721 94.248671)
(xy 55.031431 94.25) (xy 55.030721 94.251329) (xy 55.004896 94.336463) (xy 54.996176 94.425) (xy 54.996176 94.575)
(xy 55.004896 94.663537) (xy 55.030721 94.748671) (xy 55.031431 94.75) (xy 55.030721 94.751329) (xy 55.004896 94.836463)
(xy 54.996176 94.925) (xy 54.996176 95.075) (xy 55.004896 95.163537) (xy 55.030721 95.248671) (xy 55.031431 95.25)
(xy 55.030721 95.251329) (xy 55.004896 95.336463) (xy 54.996176 95.425) (xy 54.996176 95.575) (xy 55.004896 95.663537)
(xy 55.030721 95.748671) (xy 55.031431 95.75) (xy 55.030721 95.751329) (xy 55.004896 95.836463) (xy 54.996176 95.925)
(xy 54.996176 96.075) (xy 55.004896 96.163537) (xy 55.030721 96.248671) (xy 55.031431 96.25) (xy 55.030721 96.251329)
(xy 55.004896 96.336463) (xy 54.996176 96.425) (xy 54.996176 96.575) (xy 55.004896 96.663537) (xy 55.030721 96.748671)
(xy 55.031431 96.75) (xy 55.030721 96.751329) (xy 55.004896 96.836463) (xy 54.996176 96.925) (xy 54.996176 97.075)
(xy 55.004896 97.163537) (xy 55.030721 97.248671) (xy 55.031431 97.25) (xy 55.030721 97.251329) (xy 55.004896 97.336463)
(xy 54.996176 97.425) (xy 54.996176 97.575) (xy 55.004896 97.663537) (xy 55.030721 97.748671) (xy 55.031431 97.75)
(xy 55.030721 97.751329) (xy 55.004896 97.836463) (xy 54.996176 97.925) (xy 54.996176 98.037432) (xy 54.981027 98.018973)
(xy 54.877941 97.934372) (xy 54.76033 97.871508) (xy 54.632715 97.832796) (xy 54.533252 97.823) (xy 54.030423 97.823)
(xy 53.832422 97.625) (xy 54.502223 96.955199) (xy 54.565627 96.877941) (xy 54.628491 96.760331) (xy 54.667203 96.632715)
(xy 54.680274 96.500001) (xy 54.667203 96.367286) (xy 54.628491 96.239671) (xy 54.565627 96.12206) (xy 54.481026 96.018974)
(xy 54.37794 95.934373) (xy 54.260329 95.871509) (xy 54.132714 95.832797) (xy 53.999999 95.819726) (xy 53.867285 95.832797)
(xy 53.739669 95.871509) (xy 53.622059 95.934373) (xy 53.544801 95.997777) (xy 52.875 96.667578) (xy 52.022226 95.814804)
(xy 52.001027 95.788973) (xy 51.897941 95.704372) (xy 51.78033 95.641508) (xy 51.652715 95.602796) (xy 51.553252 95.593)
(xy 51.553245 95.593) (xy 51.52 95.589726) (xy 51.486755 95.593) (xy 51.270422 95.593) (xy 51.055668 95.378246)
(xy 52.313 95.378246) (xy 52.313 95.501754) (xy 52.337095 95.622889) (xy 52.38436 95.736996) (xy 52.452977 95.839689)
(xy 52.540311 95.927023) (xy 52.643004 95.99564) (xy 52.757111 96.042905) (xy 52.878246 96.067) (xy 53.001754 96.067)
(xy 53.122889 96.042905) (xy 53.236996 95.99564) (xy 53.339689 95.927023) (xy 53.427023 95.839689) (xy 53.49564 95.736996)
(xy 53.542905 95.622889) (xy 53.552962 95.572327) (xy 54.184339 94.940951) (xy 54.204448 94.924448) (xy 54.270304 94.844202)
(xy 54.319239 94.75265) (xy 54.349374 94.65331) (xy 54.357 94.575881) (xy 54.359549 94.550001) (xy 54.357 94.52412)
(xy 54.357 91.589859) (xy 54.38564 91.546996) (xy 54.432905 91.432889) (xy 54.457 91.311754) (xy 54.457 91.188246)
(xy 54.432905 91.067111) (xy 54.38564 90.953004) (xy 54.317023 90.850311) (xy 54.229689 90.762977) (xy 54.126996 90.69436)
(xy 54.012889 90.647095) (xy 53.891754 90.623) (xy 53.768246 90.623) (xy 53.647111 90.647095) (xy 53.533004 90.69436)
(xy 53.430311 90.762977) (xy 53.342977 90.850311) (xy 53.27436 90.953004) (xy 53.227095 91.067111) (xy 53.203 91.188246)
(xy 53.203 91.311754) (xy 53.227095 91.432889) (xy 53.27436 91.546996) (xy 53.303 91.589859) (xy 53.303001 94.331709)
(xy 52.807673 94.827038) (xy 52.757111 94.837095) (xy 52.643004 94.88436) (xy 52.540311 94.952977) (xy 52.452977 95.040311)
(xy 52.38436 95.143004) (xy 52.337095 95.257111) (xy 52.313 95.378246) (xy 51.055668 95.378246) (xy 49.862229 94.184807)
(xy 49.862224 94.184801) (xy 49.592219 93.914796) (xy 49.571026 93.888973) (xy 49.545204 93.867781) (xy 49.29484 93.617418)
(xy 49.275218 93.518773) (xy 49.212877 93.368269) (xy 49.122372 93.232819) (xy 49.007181 93.117628) (xy 48.871731 93.027123)
(xy 48.721227 92.964782) (xy 48.561452 92.933) (xy 48.398548 92.933) (xy 48.238773 92.964782) (xy 48.088269 93.027123)
(xy 47.952819 93.117628) (xy 47.837628 93.232819) (xy 47.747123 93.368269) (xy 47.684782 93.518773) (xy 47.653 93.678548)
(xy 47.653 93.841452) (xy 47.684782 94.001227) (xy 47.747123 94.151731) (xy 47.837628 94.287181) (xy 47.952819 94.402372)
(xy 48.088269 94.492877) (xy 48.238773 94.555218) (xy 48.337418 94.57484) (xy 48.413 94.650423) (xy 48.413001 97.933252)
(xy 48.417346 97.977365) (xy 48.38171 98.013) (xy 46.627 98.013) (xy 46.627 97.938246) (xy 46.602905 97.817111)
(xy 46.55564 97.703004) (xy 46.487023 97.600311) (xy 46.399689 97.512977) (xy 46.296996 97.44436) (xy 46.182889 97.397095)
(xy 46.061754 97.373) (xy 45.938246 97.373) (xy 45.817111 97.397095) (xy 45.703004 97.44436) (xy 45.600311 97.512977)
(xy 45.512977 97.600311) (xy 45.44436 97.703004) (xy 45.397095 97.817111) (xy 45.373 97.938246) (xy 45.373 98.061754)
(xy 45.397095 98.182889) (xy 45.416053 98.228657) (xy 44.665662 98.979049) (xy 44.645553 98.995552) (xy 44.603041 99.047353)
(xy 44.579696 99.075799) (xy 44.530761 99.167351) (xy 44.500626 99.266691) (xy 44.490451 99.37) (xy 44.493 99.395881)
(xy 44.493 99.473) (xy 42.26 99.473) (xy 42.26 99.372998) (xy 42.205252 99.372998) (xy 42.26 99.31825)
(xy 42.24898 99.216642) (xy 42.210974 99.097472) (xy 42.150449 98.988006) (xy 42.069731 98.892452) (xy 41.993703 98.831844)
(xy 41.969279 98.751329) (xy 41.968569 98.75) (xy 41.969279 98.748671) (xy 41.995104 98.663537) (xy 42.003824 98.575)
(xy 42.003824 98.425) (xy 41.995104 98.336463) (xy 41.969279 98.251329) (xy 41.968569 98.25) (xy 41.969279 98.248671)
(xy 41.995104 98.163537) (xy 42.003824 98.075) (xy 42.003824 97.925) (xy 41.995104 97.836463) (xy 41.969279 97.751329)
(xy 41.968569 97.75) (xy 41.969279 97.748671) (xy 41.993703 97.668156) (xy 42.069731 97.607548) (xy 42.150449 97.511994)
(xy 42.210974 97.402528) (xy 42.24898 97.283358) (xy 42.26 97.18175) (xy 42.10125 97.023) (xy 41.755998 97.023)
(xy 41.723671 97.005721) (xy 41.704811 97) (xy 41.723671 96.994279) (xy 41.755998 96.977) (xy 42.10125 96.977)
(xy 42.26 96.81825) (xy 42.24898 96.716642) (xy 42.210974 96.597472) (xy 42.150449 96.488006) (xy 42.069731 96.392452)
(xy 41.993703 96.331844) (xy 41.969279 96.251329) (xy 41.968569 96.25) (xy 41.969279 96.248671) (xy 41.995104 96.163537)
(xy 42.003824 96.075) (xy 42.003824 95.925) (xy 41.995104 95.836463) (xy 41.969279 95.751329) (xy 41.968569 95.75)
(xy 41.969279 95.748671) (xy 41.995104 95.663537) (xy 42.003824 95.575) (xy 42.003824 95.425) (xy 41.995104 95.336463)
(xy 41.969279 95.251329) (xy 41.968569 95.25) (xy 41.969279 95.248671) (xy 41.995104 95.163537) (xy 42.003824 95.075)
(xy 42.003824 94.925) (xy 41.995104 94.836463) (xy 41.969279 94.751329) (xy 41.968569 94.75) (xy 41.969279 94.748671)
(xy 41.995104 94.663537) (xy 42.003824 94.575) (xy 42.003824 94.527) (xy 44.663193 94.527) (xy 44.653 94.578246)
(xy 44.653 94.701754) (xy 44.677095 94.822889) (xy 44.72436 94.936996) (xy 44.753 94.979859) (xy 44.753 95.254119)
(xy 44.750451 95.28) (xy 44.753 95.30588) (xy 44.760626 95.383309) (xy 44.790761 95.482649) (xy 44.839696 95.574202)
(xy 44.905552 95.654448) (xy 44.925666 95.670955) (xy 46.637038 97.382329) (xy 46.647095 97.432889) (xy 46.69436 97.546996)
(xy 46.762977 97.649689) (xy 46.850311 97.737023) (xy 46.953004 97.80564) (xy 47.067111 97.852905) (xy 47.188246 97.877)
(xy 47.311754 97.877) (xy 47.432889 97.852905) (xy 47.546996 97.80564) (xy 47.649689 97.737023) (xy 47.737023 97.649689)
(xy 47.80564 97.546996) (xy 47.852905 97.432889) (xy 47.877 97.311754) (xy 47.877 97.188246) (xy 47.852905 97.067111)
(xy 47.80564 96.953004) (xy 47.737023 96.850311) (xy 47.649689 96.762977) (xy 47.546996 96.69436) (xy 47.432889 96.647095)
(xy 47.382329 96.637038) (xy 45.807 95.061711) (xy 45.807 94.979859) (xy 45.83564 94.936996) (xy 45.882905 94.822889)
(xy 45.907 94.701754) (xy 45.907 94.578246) (xy 45.896807 94.527) (xy 45.974119 94.527) (xy 46 94.529549)
(xy 46.025881 94.527) (xy 46.10331 94.519374) (xy 46.20265 94.489239) (xy 46.294202 94.440304) (xy 46.374448 94.374448)
(xy 46.390955 94.354334) (xy 50.132328 90.612962) (xy 50.182889 90.602905) (xy 50.296996 90.55564) (xy 50.399689 90.487023)
(xy 50.487023 90.399689) (xy 50.55564 90.296996) (xy 50.602905 90.182889) (xy 50.627 90.061754) (xy 50.627 89.938246)
(xy 50.602905 89.817111) (xy 50.55564 89.703004) (xy 50.487023 89.600311) (xy 50.399689 89.512977) (xy 50.296996 89.44436)
(xy 50.251143 89.425367) (xy 50.264448 89.414448) (xy 50.330304 89.334202) (xy 50.379239 89.24265) (xy 50.409374 89.14331)
(xy 50.417 89.065881) (xy 50.417 89.065879) (xy 50.419549 89.040001) (xy 50.417 89.014123) (xy 50.417 88.479859)
(xy 50.44564 88.436996) (xy 50.492905 88.322889) (xy 50.517 88.201754) (xy 50.517 88.078246) (xy 50.492905 87.957111)
(xy 50.44564 87.843004) (xy 50.377023 87.740311) (xy 50.289689 87.652977) (xy 50.186996 87.58436) (xy 50.072889 87.537095)
(xy 49.951754 87.513) (xy 49.828246 87.513) (xy 49.707111 87.537095) (xy 49.593004 87.58436) (xy 49.490311 87.652977)
(xy 49.402977 87.740311) (xy 49.33436 87.843004) (xy 49.287095 87.957111) (xy 49.263 88.078246) (xy 49.263 88.201754)
(xy 49.287095 88.322889) (xy 49.33436 88.436996) (xy 49.363 88.479859) (xy 49.363 88.82171) (xy 45.211711 92.973)
(xy 42.003824 92.973) (xy 42.003824 92.925) (xy 41.995104 92.836463) (xy 41.969279 92.751329) (xy 41.968569 92.75)
(xy 41.969279 92.748671) (xy 41.995104 92.663537) (xy 42.003824 92.575) (xy 42.003824 92.425) (xy 41.995104 92.336463)
(xy 41.969279 92.251329) (xy 41.968569 92.25) (xy 41.969279 92.248671) (xy 41.995104 92.163537) (xy 42.003824 92.075)
(xy 42.003824 91.925) (xy 41.995104 91.836463) (xy 41.969279 91.751329) (xy 41.968569 91.75) (xy 41.969279 91.748671)
(xy 41.995104 91.663537) (xy 42.003824 91.575) (xy 42.003824 91.425) (xy 41.995104 91.336463) (xy 41.969279 91.251329)
(xy 41.968569 91.25) (xy 41.969279 91.248671) (xy 41.995104 91.163537) (xy 42.003824 91.075) (xy 42.003824 90.925)
(xy 41.995104 90.836463) (xy 41.969279 90.751329) (xy 41.968569 90.75) (xy 41.969279 90.748671) (xy 41.995104 90.663537)
(xy 42.003824 90.575) (xy 42.003824 90.425) (xy 41.995104 90.336463) (xy 41.969279 90.251329) (xy 41.968569 90.25)
(xy 41.969279 90.248671) (xy 41.995104 90.163537) (xy 42.003824 90.075) (xy 42.003824 89.925) (xy 41.995104 89.836463)
(xy 41.969279 89.751329) (xy 41.968569 89.75) (xy 41.969279 89.748671) (xy 41.995104 89.663537) (xy 42.003824 89.575)
(xy 42.003824 89.425) (xy 41.995104 89.336463) (xy 41.969279 89.251329) (xy 41.968569 89.25) (xy 41.969279 89.248671)
(xy 41.995104 89.163537) (xy 42.003824 89.075) (xy 42.003824 88.925) (xy 41.995104 88.836463) (xy 41.969279 88.751329)
(xy 41.968569 88.75) (xy 41.969279 88.748671) (xy 41.977216 88.722506) (xy 42.149049 88.894339) (xy 42.165552 88.914448)
(xy 42.245798 88.980304) (xy 42.33735 89.029239) (xy 42.43669 89.059374) (xy 42.514119 89.067) (xy 42.514121 89.067)
(xy 42.539999 89.069549) (xy 42.565877 89.067) (xy 44.400141 89.067) (xy 44.443004 89.09564) (xy 44.557111 89.142905)
(xy 44.678246 89.167) (xy 44.801754 89.167) (xy 44.922889 89.142905) (xy 45.036996 89.09564) (xy 45.139689 89.027023)
(xy 45.227023 88.939689) (xy 45.29564 88.836996) (xy 45.342905 88.722889) (xy 45.367 88.601754) (xy 45.367 88.478246)
(xy 45.342905 88.357111) (xy 45.29564 88.243004) (xy 45.227023 88.140311) (xy 45.139689 88.052977) (xy 45.036996 87.98436)
(xy 44.922889 87.937095) (xy 44.801754 87.913) (xy 44.678246 87.913) (xy 44.557111 87.937095) (xy 44.443004 87.98436)
(xy 44.400141 88.013) (xy 42.75829 88.013) (xy 42.390955 87.645666) (xy 42.374448 87.625552) (xy 42.294202 87.559696)
(xy 42.20265 87.510761) (xy 42.10331 87.480626) (xy 42.025881 87.473) (xy 42 87.470451) (xy 41.974119 87.473)
(xy 41.56852 87.473) (xy 41.55 87.471176) (xy 40.1 87.471176) (xy 40.011463 87.479896) (xy 39.926329 87.505721)
(xy 39.847869 87.547659) (xy 39.779098 87.604098) (xy 39.722659 87.672869) (xy 39.680721 87.751329) (xy 39.654896 87.836463)
(xy 39.646176 87.925) (xy 39.646176 88.075) (xy 39.654896 88.163537) (xy 39.680721 88.248671) (xy 39.681431 88.25)
(xy 39.680721 88.251329) (xy 39.654896 88.336463) (xy 39.646176 88.425) (xy 39.646176 88.473) (xy 38.544737 88.473)
(xy 36.233159 86.161422) (xy 36.71425 86.16) (xy 36.873 86.00125) (xy 36.873 85.027) (xy 35.19875 85.027)
(xy 35.148743 85.077007) (xy 34.654622 84.582886) (xy 34.662905 84.562889) (xy 34.687 84.441754) (xy 34.687 84.318246)
(xy 34.678398 84.275) (xy 35.036928 84.275) (xy 35.04 84.61425) (xy 35.19875 84.773) (xy 36.873 84.773)
(xy 36.873 83.79875) (xy 36.71425 83.64) (xy 35.675 83.636928) (xy 35.550518 83.649188) (xy 35.43082 83.685498)
(xy 35.320506 83.744463) (xy 35.223815 83.823815) (xy 35.144463 83.920506) (xy 35.085498 84.03082) (xy 35.049188 84.150518)
(xy 35.036928 84.275) (xy 34.678398 84.275) (xy 34.662905 84.197111) (xy 34.61564 84.083004) (xy 34.547023 83.980311)
(xy 34.459689 83.892977) (xy 34.356996 83.82436) (xy 34.242889 83.777095) (xy 34.121754 83.753) (xy 33.998246 83.753)
(xy 33.877111 83.777095) (xy 33.763004 83.82436) (xy 33.660311 83.892977) (xy 33.572977 83.980311) (xy 33.50436 84.083004)
(xy 33.457095 84.197111) (xy 33.433 84.318246) (xy 33.433 84.441754) (xy 33.457095 84.562889) (xy 33.50436 84.676996)
(xy 33.531954 84.718293) (xy 33.530451 84.733553) (xy 33.538552 84.8158) (xy 33.540626 84.836862) (xy 33.570761 84.936202)
(xy 33.619696 85.027755) (xy 33.685552 85.108001) (xy 33.705666 85.124508) (xy 37.554157 88.973) (xy 36.22829 88.973)
(xy 34.112962 86.857673) (xy 34.102905 86.807111) (xy 34.05564 86.693004) (xy 33.987023 86.590311) (xy 33.899689 86.502977)
(xy 33.796996 86.43436) (xy 33.682889 86.387095) (xy 33.561754 86.363) (xy 33.438246 86.363) (xy 33.317111 86.387095)
(xy 33.203004 86.43436) (xy 33.100311 86.502977) (xy 33.012977 86.590311) (xy 32.94436 86.693004) (xy 32.916223 86.760933)
(xy 31.457 85.301711) (xy 31.457 85.178246) (xy 31.432905 85.057111) (xy 31.38564 84.943004) (xy 31.317023 84.840311)
(xy 31.229689 84.752977) (xy 31.126996 84.68436) (xy 31.012889 84.637095) (xy 30.891754 84.613) (xy 30.768246 84.613)
(xy 30.647111 84.637095) (xy 30.533004 84.68436) (xy 30.430311 84.752977) (xy 30.342977 84.840311) (xy 30.27436 84.943004)
(xy 30.251738 84.997619) (xy 30.186996 84.95436) (xy 30.072889 84.907095) (xy 29.951754 84.883) (xy 29.828246 84.883)
(xy 29.707111 84.907095) (xy 29.593004 84.95436) (xy 29.490311 85.022977) (xy 29.402977 85.110311) (xy 29.33436 85.213004)
(xy 29.287095 85.327111) (xy 29.263 85.448246) (xy 29.263 85.571754) (xy 29.287095 85.692889) (xy 29.33436 85.806996)
(xy 29.402977 85.909689) (xy 29.490311 85.997023) (xy 29.593004 86.06564) (xy 29.707111 86.112905) (xy 29.770156 86.125445)
(xy 32.49971 88.855) (xy 32.372998 88.855) (xy 32.372998 89.013748) (xy 32.21425 88.855) (xy 31.65 88.851928)
(xy 31.525518 88.864188) (xy 31.40582 88.900498) (xy 31.295506 88.959463) (xy 31.198815 89.038815) (xy 31.119463 89.135506)
(xy 31.060498 89.24582) (xy 31.024188 89.365518) (xy 31.011928 89.49) (xy 31.015 90.05425) (xy 31.17375 90.213)
(xy 32.373 90.213) (xy 32.373 90.193) (xy 32.627 90.193) (xy 32.627 90.213) (xy 32.647 90.213)
(xy 32.647 90.467) (xy 32.627 90.467) (xy 32.627 90.487) (xy 32.373 90.487) (xy 32.373 90.467)
(xy 31.17375 90.467) (xy 31.015 90.62575) (xy 31.011928 91.19) (xy 31.024188 91.314482) (xy 31.060498 91.43418)
(xy 31.119463 91.544494) (xy 31.198815 91.641185) (xy 31.295506 91.720537) (xy 31.40582 91.779502) (xy 31.525518 91.815812)
(xy 31.65 91.828072) (xy 31.867553 91.826888) (xy 31.717833 91.926927) (xy 31.546927 92.097833) (xy 31.412647 92.298798)
(xy 31.320153 92.522097) (xy 31.273 92.759151) (xy 31.273 93.000849) (xy 31.320153 93.237903) (xy 31.412647 93.461202)
(xy 31.546927 93.662167) (xy 31.577759 93.692999) (xy 31.43829 93.692999) (xy 30.277 92.531711) (xy 30.277 88.775877)
(xy 30.279549 88.749999) (xy 30.276386 88.717886) (xy 30.269374 88.64669) (xy 30.239239 88.54735) (xy 30.190304 88.455798)
(xy 30.124448 88.375552) (xy 30.104339 88.359049) (xy 27.612962 85.867673) (xy 27.602905 85.817111) (xy 27.55564 85.703004)
(xy 27.487023 85.600311) (xy 27.399689 85.512977) (xy 27.296996 85.44436) (xy 27.182889 85.397095) (xy 27.061754 85.373)
(xy 26.938246 85.373) (xy 26.817111 85.397095) (xy 26.703004 85.44436) (xy 26.600311 85.512977) (xy 26.512977 85.600311)
(xy 26.44436 85.703004) (xy 26.397095 85.817111) (xy 26.373 85.938246) (xy 26.373 86.061754) (xy 26.397095 86.182889)
(xy 26.44436 86.296996) (xy 26.512977 86.399689) (xy 26.600311 86.487023) (xy 26.703004 86.55564) (xy 26.817111 86.602905)
(xy 26.867673 86.612962) (xy 29.223001 88.968291) (xy 29.223 92.724119) (xy 29.220451 92.75) (xy 29.224826 92.794417)
(xy 29.230626 92.853309) (xy 29.260761 92.952649) (xy 29.309696 93.044202) (xy 29.375552 93.124448) (xy 29.395666 93.140955)
(xy 30.829052 94.574343) (xy 30.845551 94.594447) (xy 30.925797 94.660303) (xy 31.017349 94.709238) (xy 31.116689 94.739373)
(xy 31.178452 94.745456) (xy 31.219999 94.749548) (xy 31.24588 94.746999) (xy 31.473985 94.746999) (xy 31.412647 94.838798)
(xy 31.320153 95.062097) (xy 31.273 95.299151) (xy 31.273 95.540849) (xy 31.320153 95.777903) (xy 31.412647 96.001202)
(xy 31.546927 96.202167) (xy 31.717833 96.373073) (xy 31.918798 96.507353) (xy 32.036798 96.556231) (xy 31.868748 96.615843)
(xy 31.618645 96.764822) (xy 31.402412 96.959731) (xy 31.228359 97.19308) (xy 31.103175 97.455901) (xy 31.058524 97.60311)
(xy 31.179845 97.833) (xy 32.373 97.833) (xy 32.373 97.813) (xy 32.627 97.813) (xy 32.627 97.833)
(xy 32.647 97.833) (xy 32.647 98.087) (xy 32.627 98.087) (xy 32.627 98.107) (xy 32.373 98.107)
(xy 32.373 98.087) (xy 31.179845 98.087) (xy 31.058524 98.31689) (xy 31.103175 98.464099) (xy 31.228359 98.72692)
(xy 31.402412 98.960269) (xy 31.618645 99.155178) (xy 31.868748 99.304157) (xy 32.036798 99.363769) (xy 31.918798 99.412647)
(xy 31.717833 99.546927) (xy 31.546927 99.717833) (xy 31.412647 99.918798) (xy 31.320153 100.142097) (xy 31.273 100.379151)
(xy 31.273 100.620849) (xy 31.320153 100.857903) (xy 31.412647 101.081202) (xy 31.546927 101.282167) (xy 31.717833 101.453073)
(xy 31.918798 101.587353) (xy 32.142097 101.679847) (xy 32.379151 101.727) (xy 32.620849 101.727) (xy 32.857903 101.679847)
(xy 33.081202 101.587353) (xy 33.282167 101.453073) (xy 33.453073 101.282167) (xy 33.473001 101.252343) (xy 33.473001 103.281708)
(xy 32.781711 103.973) (xy 29.741583 103.973) (xy 29.76564 103.936996) (xy 29.812905 103.822889) (xy 29.837 103.701754)
(xy 29.837 103.578246) (xy 29.812905 103.457111) (xy 29.76564 103.343004) (xy 29.737 103.300141) (xy 29.737 94.869769)
(xy 29.78564 94.796974) (xy 29.832905 94.682867) (xy 29.857 94.561732) (xy 29.857 94.438224) (xy 29.832905 94.317089)
(xy 29.78564 94.202982) (xy 29.717023 94.100289) (xy 29.629689 94.012955) (xy 29.526996 93.944338) (xy 29.412889 93.897073)
(xy 29.291754 93.872978) (xy 29.168246 93.872978) (xy 29.047111 93.897073) (xy 28.933004 93.944338) (xy 28.830311 94.012955)
(xy 28.742977 94.100289) (xy 28.67436 94.202982) (xy 28.627095 94.317089) (xy 28.603 94.438224) (xy 28.603 94.561732)
(xy 28.627095 94.682867) (xy 28.67436 94.796974) (xy 28.683001 94.809906) (xy 28.683 103.300141) (xy 28.65436 103.343004)
(xy 28.607095 103.457111) (xy 28.583 103.578246) (xy 28.583 103.701754) (xy 28.607095 103.822889) (xy 28.65436 103.936996)
(xy 28.678417 103.973) (xy 26.718291 103.973) (xy 24.407 101.661711) (xy 24.407 101.642942) (xy 24.541202 101.587353)
(xy 24.742167 101.453073) (xy 24.913073 101.282167) (xy 25.013112 101.132447) (xy 25.011928 101.35) (xy 25.024188 101.474482)
(xy 25.060498 101.59418) (xy 25.119463 101.704494) (xy 25.198815 101.801185) (xy 25.295506 101.880537) (xy 25.40582 101.939502)
(xy 25.525518 101.975812) (xy 25.65 101.988072) (xy 26.21425 101.985) (xy 26.373 101.82625) (xy 26.373 100.627)
(xy 26.627 100.627) (xy 26.627 101.82625) (xy 26.78575 101.985) (xy 27.35 101.988072) (xy 27.474482 101.975812)
(xy 27.59418 101.939502) (xy 27.704494 101.880537) (xy 27.801185 101.801185) (xy 27.880537 101.704494) (xy 27.939502 101.59418)
(xy 27.975812 101.474482) (xy 27.988072 101.35) (xy 27.985 100.78575) (xy 27.82625 100.627) (xy 26.627 100.627)
(xy 26.373 100.627) (xy 26.353 100.627) (xy 26.353 100.373) (xy 26.373 100.373) (xy 26.373 100.353)
(xy 26.627 100.353) (xy 26.627 100.373) (xy 27.82625 100.373) (xy 27.985 100.21425) (xy 27.988072 99.65)
(xy 27.975812 99.525518) (xy 27.939502 99.40582) (xy 27.880537 99.295506) (xy 27.801185 99.198815) (xy 27.704494 99.119463)
(xy 27.59418 99.060498) (xy 27.474482 99.024188) (xy 27.35 99.011928) (xy 27.341443 99.011975) (xy 27.348792 98.988397)
(xy 26.5 98.139605) (xy 25.651208 98.988397) (xy 25.658557 99.011975) (xy 25.65 99.011928) (xy 25.525518 99.024188)
(xy 25.40582 99.060498) (xy 25.295506 99.119463) (xy 25.198815 99.198815) (xy 25.119463 99.295506) (xy 25.060498 99.40582)
(xy 25.024188 99.525518) (xy 25.011928 99.65) (xy 25.013112 99.867553) (xy 24.913073 99.717833) (xy 24.742167 99.546927)
(xy 24.541202 99.412647) (xy 24.317903 99.320153) (xy 24.080849 99.273) (xy 23.839151 99.273) (xy 23.602097 99.320153)
(xy 23.378798 99.412647) (xy 23.177833 99.546927) (xy 23.006927 99.717833) (xy 22.872647 99.918798) (xy 22.780153 100.142097)
(xy 22.733 100.379151) (xy 22.733 100.620849) (xy 22.780153 100.857903) (xy 22.872647 101.081202) (xy 23.006927 101.282167)
(xy 23.177833 101.453073) (xy 23.353 101.570116) (xy 23.353 101.854119) (xy 23.350451 101.88) (xy 23.35837 101.960408)
(xy 23.360626 101.983309) (xy 23.390761 102.082649) (xy 23.439696 102.174202) (xy 23.505552 102.254448) (xy 23.525666 102.270955)
(xy 26.109054 104.854345) (xy 26.125552 104.874448) (xy 26.205798 104.940304) (xy 26.29735 104.989239) (xy 26.39669 105.019374)
(xy 26.462758 105.025881) (xy 26.5 105.029549) (xy 26.525881 105.027) (xy 32.974119 105.027) (xy 33 105.029549)
(xy 33.025881 105.027) (xy 33.10331 105.019374) (xy 33.20265 104.989239) (xy 33.294202 104.940304) (xy 33.351109 104.893602)
(xy 33.201711 105.043) (xy 22.28829 105.043) (xy 22.027 104.78171) (xy 22.027 99.548289) (xy 22.937311 98.637979)
(xy 23.006927 98.742167) (xy 23.177833 98.913073) (xy 23.378798 99.047353) (xy 23.602097 99.139847) (xy 23.839151 99.187)
(xy 24.080849 99.187) (xy 24.317903 99.139847) (xy 24.541202 99.047353) (xy 24.742167 98.913073) (xy 24.913073 98.742167)
(xy 25.047353 98.541202) (xy 25.092152 98.433049) (xy 25.149081 98.593747) (xy 25.222528 98.731157) (xy 25.471603 98.808792)
(xy 26.320395 97.96) (xy 26.679605 97.96) (xy 27.528397 98.808792) (xy 27.777472 98.731157) (xy 27.903371 98.467117)
(xy 27.975339 98.183589) (xy 27.990611 97.891469) (xy 27.948599 97.601981) (xy 27.850919 97.326253) (xy 27.777472 97.188843)
(xy 27.528397 97.111208) (xy 26.679605 97.96) (xy 26.320395 97.96) (xy 25.471603 97.111208) (xy 25.222528 97.188843)
(xy 25.096629 97.452883) (xy 25.089566 97.480709) (xy 25.047353 97.378798) (xy 24.913073 97.177833) (xy 24.742167 97.006927)
(xy 24.541202 96.872647) (xy 24.317903 96.780153) (xy 24.080849 96.733) (xy 23.839151 96.733) (xy 23.602097 96.780153)
(xy 23.378798 96.872647) (xy 23.177833 97.006927) (xy 23.006927 97.177833) (xy 22.872647 97.378798) (xy 22.850454 97.432376)
(xy 22.844119 97.433) (xy 22.76669 97.440626) (xy 22.66735 97.470761) (xy 22.575798 97.519696) (xy 22.495552 97.585552)
(xy 22.479053 97.605656) (xy 21.145666 98.939045) (xy 21.125552 98.955552) (xy 21.059696 99.035798) (xy 21.026731 99.097472)
(xy 21.010761 99.127351) (xy 20.980626 99.226691) (xy 20.970451 99.33) (xy 20.973 99.355881) (xy 20.973001 104.974109)
(xy 20.970451 105) (xy 20.980626 105.103309) (xy 21.010761 105.202649) (xy 21.059696 105.294201) (xy 21.062674 105.29783)
(xy 21.125553 105.374448) (xy 21.145661 105.39095) (xy 21.679053 105.924344) (xy 21.695552 105.944448) (xy 21.730343 105.973)
(xy 21.10829 105.973) (xy 20.527 105.391711) (xy 20.527 97.718289) (xy 22.29829 95.947) (xy 22.850196 95.947)
(xy 22.872647 96.001202) (xy 23.006927 96.202167) (xy 23.177833 96.373073) (xy 23.378798 96.507353) (xy 23.602097 96.599847)
(xy 23.839151 96.647) (xy 24.080849 96.647) (xy 24.317903 96.599847) (xy 24.541202 96.507353) (xy 24.629436 96.448397)
(xy 25.651208 96.448397) (xy 25.726514 96.69) (xy 25.651208 96.931603) (xy 26.5 97.780395) (xy 27.348792 96.931603)
(xy 27.273486 96.69) (xy 27.348792 96.448397) (xy 26.5 95.599605) (xy 25.651208 96.448397) (xy 24.629436 96.448397)
(xy 24.742167 96.373073) (xy 24.913073 96.202167) (xy 25.047353 96.001202) (xy 25.092152 95.893049) (xy 25.149081 96.053747)
(xy 25.222528 96.191157) (xy 25.471603 96.268792) (xy 26.320395 95.42) (xy 26.679605 95.42) (xy 27.528397 96.268792)
(xy 27.777472 96.191157) (xy 27.903371 95.927117) (xy 27.975339 95.643589) (xy 27.990611 95.351469) (xy 27.948599 95.061981)
(xy 27.850919 94.786253) (xy 27.777472 94.648843) (xy 27.528397 94.571208) (xy 26.679605 95.42) (xy 26.320395 95.42)
(xy 25.471603 94.571208) (xy 25.222528 94.648843) (xy 25.096629 94.912883) (xy 25.089566 94.940709) (xy 25.047353 94.838798)
(xy 24.913073 94.637833) (xy 24.742167 94.466927) (xy 24.541202 94.332647) (xy 24.317903 94.240153) (xy 24.080849 94.193)
(xy 23.839151 94.193) (xy 23.602097 94.240153) (xy 23.378798 94.332647) (xy 23.177833 94.466927) (xy 23.006927 94.637833)
(xy 22.872647 94.838798) (xy 22.850196 94.893) (xy 22.10588 94.893) (xy 22.079999 94.890451) (xy 22.027314 94.89564)
(xy 21.97669 94.900626) (xy 21.87735 94.930761) (xy 21.785798 94.979696) (xy 21.705552 95.045552) (xy 21.689049 95.065661)
(xy 19.645662 97.109049) (xy 19.625553 97.125552) (xy 19.570134 97.19308) (xy 19.559696 97.205799) (xy 19.527 97.26697)
(xy 19.527 96.218289) (xy 22.33829 93.407) (xy 22.850196 93.407) (xy 22.872647 93.461202) (xy 23.006927 93.662167)
(xy 23.177833 93.833073) (xy 23.378798 93.967353) (xy 23.602097 94.059847) (xy 23.839151 94.107) (xy 24.080849 94.107)
(xy 24.317903 94.059847) (xy 24.541202 93.967353) (xy 24.629436 93.908397) (xy 25.651208 93.908397) (xy 25.726514 94.15)
(xy 25.651208 94.391603) (xy 26.5 95.240395) (xy 27.348792 94.391603) (xy 27.273486 94.15) (xy 27.348792 93.908397)
(xy 26.5 93.059605) (xy 25.651208 93.908397) (xy 24.629436 93.908397) (xy 24.742167 93.833073) (xy 24.913073 93.662167)
(xy 25.047353 93.461202) (xy 25.092152 93.353049) (xy 25.149081 93.513747) (xy 25.222528 93.651157) (xy 25.471603 93.728792)
(xy 26.320395 92.88) (xy 26.679605 92.88) (xy 27.528397 93.728792) (xy 27.777472 93.651157) (xy 27.903371 93.387117)
(xy 27.975339 93.103589) (xy 27.990611 92.811469) (xy 27.948599 92.521981) (xy 27.850919 92.246253) (xy 27.777472 92.108843)
(xy 27.528397 92.031208) (xy 26.679605 92.88) (xy 26.320395 92.88) (xy 25.471603 92.031208) (xy 25.222528 92.108843)
(xy 25.096629 92.372883) (xy 25.089566 92.400709) (xy 25.047353 92.298798) (xy 24.913073 92.097833) (xy 24.742167 91.926927)
(xy 24.541202 91.792647) (xy 24.317903 91.700153) (xy 24.080849 91.653) (xy 23.839151 91.653) (xy 23.602097 91.700153)
(xy 23.378798 91.792647) (xy 23.177833 91.926927) (xy 23.006927 92.097833) (xy 22.872647 92.298798) (xy 22.850196 92.353)
(xy 22.145877 92.353) (xy 22.119999 92.350451) (xy 22.094121 92.353) (xy 22.094119 92.353) (xy 22.01669 92.360626)
(xy 21.91735 92.390761) (xy 21.825798 92.439696) (xy 21.745552 92.505552) (xy 21.729049 92.525661) (xy 18.645666 95.609045)
(xy 18.625552 95.625552) (xy 18.559696 95.705798) (xy 18.525787 95.769239) (xy 18.510761 95.797351) (xy 18.480626 95.896691)
(xy 18.470451 96) (xy 18.473 96.025881) (xy 18.473001 106.634109) (xy 18.470451 106.66) (xy 18.480626 106.763309)
(xy 18.510761 106.862649) (xy 18.552268 106.940304) (xy 18.559697 106.954202) (xy 18.625553 107.034448) (xy 18.645662 107.050951)
(xy 19.449049 107.854339) (xy 19.465552 107.874448) (xy 19.545798 107.940304) (xy 19.63735 107.989239) (xy 19.73669 108.019374)
(xy 19.814119 108.027) (xy 19.814121 108.027) (xy 19.839999 108.029549) (xy 19.865877 108.027) (xy 35.474119 108.027)
(xy 35.5 108.029549) (xy 35.525881 108.027) (xy 35.60331 108.019374) (xy 35.70265 107.989239) (xy 35.794202 107.940304)
(xy 35.874448 107.874448) (xy 35.890955 107.854334) (xy 36.854346 106.890945) (xy 36.874448 106.874448) (xy 36.906822 106.835)
(xy 40.526928 106.835) (xy 40.539188 106.959482) (xy 40.575498 107.07918) (xy 40.634463 107.189494) (xy 40.713815 107.286185)
(xy 40.810506 107.365537) (xy 40.92082 107.424502) (xy 41.040518 107.460812) (xy 41.165 107.473072) (xy 41.35425 107.47)
(xy 41.513 107.31125) (xy 41.513 106.5245) (xy 40.68875 106.5245) (xy 40.53 106.68325) (xy 40.526928 106.835)
(xy 36.906822 106.835) (xy 36.940304 106.794202) (xy 36.989239 106.70265) (xy 37.019374 106.60331) (xy 37.027 106.525881)
(xy 37.027 106.52588) (xy 37.029549 106.5) (xy 37.027 106.474119) (xy 37.027 98.275) (xy 37.386928 98.275)
(xy 37.39 98.42675) (xy 37.54875 98.5855) (xy 38.373 98.5855) (xy 38.373 97.79875) (xy 38.627 97.79875)
(xy 38.627 98.5855) (xy 39.45125 98.5855) (xy 39.61 98.42675) (xy 39.613072 98.275) (xy 39.600812 98.150518)
(xy 39.564502 98.03082) (xy 39.505537 97.920506) (xy 39.426185 97.823815) (xy 39.329494 97.744463) (xy 39.21918 97.685498)
(xy 39.099482 97.649188) (xy 38.975 97.636928) (xy 38.78575 97.64) (xy 38.627 97.79875) (xy 38.373 97.79875)
(xy 38.21425 97.64) (xy 38.025 97.636928) (xy 37.900518 97.649188) (xy 37.78082 97.685498) (xy 37.670506 97.744463)
(xy 37.573815 97.823815) (xy 37.494463 97.920506) (xy 37.435498 98.03082) (xy 37.399188 98.150518) (xy 37.386928 98.275)
(xy 37.027 98.275) (xy 37.027 97.968289) (xy 37.96829 97.027) (xy 39.39 97.027) (xy 39.39 97.127002)
(xy 39.444748 97.127002) (xy 39.39 97.18175) (xy 39.40102 97.283358) (xy 39.439026 97.402528) (xy 39.499551 97.511994)
(xy 39.580269 97.607548) (xy 39.656297 97.668156) (xy 39.680721 97.748671) (xy 39.681431 97.75) (xy 39.680721 97.751329)
(xy 39.654896 97.836463) (xy 39.646176 97.925) (xy 39.646176 98.075) (xy 39.654896 98.163537) (xy 39.680721 98.248671)
(xy 39.681431 98.25) (xy 39.680721 98.251329) (xy 39.654896 98.336463) (xy 39.646176 98.425) (xy 39.646176 98.575)
(xy 39.654896 98.663537) (xy 39.680721 98.748671) (xy 39.681431 98.75) (xy 39.680721 98.751329) (xy 39.656297 98.831844)
(xy 39.580269 98.892452) (xy 39.545437 98.933687) (xy 39.45125 98.8395) (xy 38.627 98.8395) (xy 38.627 98.8595)
(xy 38.373 98.8595) (xy 38.373 98.8395) (xy 37.54875 98.8395) (xy 37.39 98.99825) (xy 37.386928 99.15)
(xy 37.399188 99.274482) (xy 37.435498 99.39418) (xy 37.494463 99.504494) (xy 37.573815 99.601185) (xy 37.670506 99.680537)
(xy 37.755666 99.726057) (xy 37.746885 99.736756) (xy 37.691664 99.840068) (xy 37.657658 99.952169) (xy 37.646176 100.06875)
(xy 37.646176 100.50625) (xy 37.657658 100.622831) (xy 37.691664 100.734932) (xy 37.746885 100.838244) (xy 37.821201 100.928799)
(xy 37.911756 101.003115) (xy 38.015068 101.058336) (xy 38.127169 101.092342) (xy 38.24375 101.103824) (xy 38.75625 101.103824)
(xy 38.872831 101.092342) (xy 38.984932 101.058336) (xy 39.088244 101.003115) (xy 39.178799 100.928799) (xy 39.253115 100.838244)
(xy 39.308336 100.734932) (xy 39.342342 100.622831) (xy 39.35178 100.527) (xy 40.08148 100.527) (xy 40.1 100.528824)
(xy 41.55 100.528824) (xy 41.56852 100.527) (xy 42.263596 100.527) (xy 42.251329 100.530721) (xy 42.172869 100.572659)
(xy 42.104098 100.629098) (xy 42.047659 100.697869) (xy 42.005721 100.776329) (xy 41.979896 100.861463) (xy 41.971176 100.95)
(xy 41.971176 102.4) (xy 41.979896 102.488537) (xy 42.005721 102.573671) (xy 42.047659 102.652131) (xy 42.104098 102.720902)
(xy 42.172869 102.777341) (xy 42.251329 102.819279) (xy 42.336463 102.845104) (xy 42.425 102.853824) (xy 42.575 102.853824)
(xy 42.663537 102.845104) (xy 42.748671 102.819279) (xy 42.75 102.818569) (xy 42.751329 102.819279) (xy 42.836463 102.845104)
(xy 42.925 102.853824) (xy 43.075 102.853824) (xy 43.163537 102.845104) (xy 43.248671 102.819279) (xy 43.25 102.818569)
(xy 43.251329 102.819279) (xy 43.336463 102.845104) (xy 43.425 102.853824) (xy 43.575 102.853824) (xy 43.663537 102.845104)
(xy 43.748671 102.819279) (xy 43.75 102.818569) (xy 43.751329 102.819279) (xy 43.836463 102.845104) (xy 43.925 102.853824)
(xy 44.075 102.853824) (xy 44.163537 102.845104) (xy 44.248671 102.819279) (xy 44.25 102.818569) (xy 44.251329 102.819279)
(xy 44.336463 102.845104) (xy 44.375738 102.848972) (xy 44.231711 102.993) (xy 42.96838 102.993) (xy 42.942499 102.990451)
(xy 42.893175 102.995309) (xy 42.83919 103.000626) (xy 42.73985 103.030761) (xy 42.648298 103.079696) (xy 42.568052 103.145552)
(xy 42.551549 103.165661) (xy 41.711035 104.006176) (xy 41.38375 104.006176) (xy 41.267169 104.017658) (xy 41.155068 104.051664)
(xy 41.051756 104.106885) (xy 40.961201 104.181201) (xy 40.886885 104.271756) (xy 40.831664 104.375068) (xy 40.797658 104.487169)
(xy 40.786176 104.60375) (xy 40.786176 105.04125) (xy 40.797658 105.157831) (xy 40.831664 105.269932) (xy 40.886885 105.373244)
(xy 40.895666 105.383943) (xy 40.810506 105.429463) (xy 40.713815 105.508815) (xy 40.634463 105.605506) (xy 40.575498 105.71582)
(xy 40.539188 105.835518) (xy 40.526928 105.96) (xy 40.53 106.11175) (xy 40.68875 106.2705) (xy 41.513 106.2705)
(xy 41.513 106.2505) (xy 41.767 106.2505) (xy 41.767 106.2705) (xy 41.787 106.2705) (xy 41.787 106.5245)
(xy 41.767 106.5245) (xy 41.767 107.31125) (xy 41.92575 107.47) (xy 42.115 107.473072) (xy 42.239482 107.460812)
(xy 42.35918 107.424502) (xy 42.373 107.417115) (xy 42.373 109) (xy 42.37544 109.024776) (xy 42.382667 109.048601)
(xy 42.394403 109.070557) (xy 42.410197 109.089803) (xy 42.429443 109.105597) (xy 42.451399 109.117333) (xy 42.475224 109.12456)
(xy 42.5 109.127) (xy 54.25 109.127) (xy 54.274776 109.12456) (xy 54.298601 109.117333) (xy 54.320557 109.105597)
(xy 54.339803 109.089803) (xy 54.355597 109.070557) (xy 54.367333 109.048601) (xy 54.37456 109.024776) (xy 54.377 109)
(xy 54.377 105.312291) (xy 54.419053 105.354344) (xy 54.435552 105.374448) (xy 54.515798 105.440304) (xy 54.60735 105.489239)
(xy 54.70669 105.519374) (xy 54.763813 105.525) (xy 54.81 105.529549) (xy 54.835881 105.527) (xy 55.910141 105.527)
(xy 55.953004 105.55564) (xy 56.067111 105.602905) (xy 56.188246 105.627) (xy 56.311754 105.627) (xy 56.432889 105.602905)
(xy 56.546996 105.55564) (xy 56.649689 105.487023) (xy 56.737023 105.399689) (xy 56.80564 105.296996) (xy 56.852905 105.182889)
(xy 56.877 105.061754) (xy 56.877 104.938246) (xy 56.852905 104.817111) (xy 56.80564 104.703004) (xy 56.737023 104.600311)
(xy 56.649689 104.512977) (xy 56.546996 104.44436) (xy 56.432889 104.397095) (xy 56.311754 104.373) (xy 56.188246 104.373)
(xy 56.067111 104.397095) (xy 55.953004 104.44436) (xy 55.910141 104.473) (xy 55.028291 104.473) (xy 54.790812 104.235521)
(xy 54.798246 104.237) (xy 54.921754 104.237) (xy 55.042889 104.212905) (xy 55.156996 104.16564) (xy 55.203066 104.134857)
(xy 55.212977 104.149689) (xy 55.300311 104.237023) (xy 55.403004 104.30564) (xy 55.517111 104.352905) (xy 55.638246 104.377)
(xy 55.761754 104.377) (xy 55.882889 104.352905) (xy 55.996996 104.30564) (xy 56.099689 104.237023) (xy 56.187023 104.149689)
(xy 56.25564 104.046996) (xy 56.302905 103.932889) (xy 56.327 103.811754) (xy 56.327 103.688246) (xy 56.302905 103.567111)
(xy 56.25564 103.453004) (xy 56.227 103.410141) (xy 56.227 103.225881) (xy 56.229549 103.2) (xy 56.219374 103.09669)
(xy 56.212282 103.073311) (xy 56.189239 102.99735) (xy 56.140304 102.905798) (xy 56.074448 102.825552) (xy 56.054338 102.809048)
(xy 55.890955 102.645666) (xy 55.874448 102.625552) (xy 55.794202 102.559696) (xy 55.70265 102.510761) (xy 55.60331 102.480626)
(xy 55.525881 102.473) (xy 55.5 102.470451) (xy 55.474119 102.473) (xy 55.021634 102.473) (xy 55.028824 102.4)
(xy 55.028824 102.202) (xy 55.706711 102.202) (xy 56.473 102.968291) (xy 56.473 103.474119) (xy 56.470451 103.5)
(xy 56.477609 103.572678) (xy 56.480626 103.603309) (xy 56.510761 103.702649) (xy 56.559696 103.794202) (xy 56.625552 103.874448)
(xy 56.645666 103.890955) (xy 57.859049 105.104339) (xy 57.875552 105.124448) (xy 57.955798 105.190304) (xy 58.04735 105.239239)
(xy 58.1267 105.26331) (xy 58.14669 105.269374) (xy 58.147476 105.269451) (xy 58.157658 105.372831) (xy 58.191664 105.484932)
(xy 58.246885 105.588244) (xy 58.321201 105.678799) (xy 58.40796 105.75) (xy 58.321201 105.821201) (xy 58.246885 105.911756)
(xy 58.191664 106.015068) (xy 58.157658 106.127169) (xy 58.146176 106.24375) (xy 58.146176 106.75625) (xy 58.157658 106.872831)
(xy 58.191664 106.984932) (xy 58.246885 107.088244) (xy 58.321201 107.178799) (xy 58.40796 107.25) (xy 58.321201 107.321201)
(xy 58.246885 107.411756) (xy 58.191664 107.515068) (xy 58.157658 107.627169) (xy 58.146176 107.74375) (xy 58.146176 108.25625)
(xy 58.157658 108.372831) (xy 58.1912 108.483402) (xy 58.170506 108.494463) (xy 58.073815 108.573815) (xy 57.994463 108.670506)
(xy 57.935498 108.78082) (xy 57.899188 108.900518) (xy 57.886928 109.025) (xy 57.89 109.21425) (xy 58.04875 109.373)
(xy 58.8355 109.373) (xy 58.8355 109.353) (xy 59.0895 109.353) (xy 59.0895 109.373) (xy 59.1095 109.373)
(xy 59.1095 109.627) (xy 59.0895 109.627) (xy 59.0895 109.647) (xy 58.8355 109.647) (xy 58.8355 109.627)
(xy 58.04875 109.627) (xy 57.89 109.78575) (xy 57.886928 109.975) (xy 57.899188 110.099482) (xy 57.935498 110.21918)
(xy 57.994463 110.329494) (xy 58.030167 110.373) (xy 34.128824 110.373) (xy 34.128824 110.225) (xy 34.121467 110.150707)
(xy 34.099836 110.079664) (xy 34.06476 110.014207) (xy 34.017589 109.956851) (xy 33.960134 109.909799) (xy 33.210134 109.409799)
(xy 33.145336 109.375164) (xy 33.074293 109.353533) (xy 33.000396 109.346176) (xy 32.926484 109.353378) (xy 32.855397 109.374861)
(xy 32.789866 109.409799) (xy 32.039866 109.909799) (xy 31.982131 109.957131) (xy 31.935019 110.014537) (xy 31.900012 110.08003)
(xy 31.878455 110.151095) (xy 31.871176 110.225) (xy 31.871176 110.373) (xy 18.402 110.373) (xy 18.402 108.480253)
(xy 18.400313 108.463122) (xy 18.400334 108.460076) (xy 18.399786 108.45449) (xy 18.389586 108.357441) (xy 18.382261 108.321755)
(xy 18.375433 108.28596) (xy 18.37381 108.280587) (xy 18.344954 108.187368) (xy 18.330836 108.153784) (xy 18.317185 108.119995)
(xy 18.31455 108.115039) (xy 18.268137 108.029201) (xy 18.247759 107.998989) (xy 18.227813 107.968509) (xy 18.224265 107.964159)
(xy 18.162063 107.88897) (xy 18.136198 107.863285) (xy 18.127 107.853892) (xy 18.127 90.219151) (xy 22.733 90.219151)
(xy 22.733 90.460849) (xy 22.780153 90.697903) (xy 22.872647 90.921202) (xy 23.006927 91.122167) (xy 23.177833 91.293073)
(xy 23.378798 91.427353) (xy 23.602097 91.519847) (xy 23.839151 91.567) (xy 24.080849 91.567) (xy 24.317903 91.519847)
(xy 24.541202 91.427353) (xy 24.629436 91.368397) (xy 25.651208 91.368397) (xy 25.726514 91.61) (xy 25.651208 91.851603)
(xy 26.5 92.700395) (xy 27.348792 91.851603) (xy 27.273486 91.61) (xy 27.348792 91.368397) (xy 26.5 90.519605)
(xy 25.651208 91.368397) (xy 24.629436 91.368397) (xy 24.742167 91.293073) (xy 24.913073 91.122167) (xy 25.047353 90.921202)
(xy 25.092152 90.813049) (xy 25.149081 90.973747) (xy 25.222528 91.111157) (xy 25.471603 91.188792) (xy 26.320395 90.34)
(xy 26.679605 90.34) (xy 27.528397 91.188792) (xy 27.777472 91.111157) (xy 27.903371 90.847117) (xy 27.975339 90.563589)
(xy 27.990611 90.271469) (xy 27.948599 89.981981) (xy 27.850919 89.706253) (xy 27.777472 89.568843) (xy 27.528397 89.491208)
(xy 26.679605 90.34) (xy 26.320395 90.34) (xy 25.471603 89.491208) (xy 25.222528 89.568843) (xy 25.096629 89.832883)
(xy 25.089566 89.860709) (xy 25.047353 89.758798) (xy 24.913073 89.557833) (xy 24.742167 89.386927) (xy 24.629437 89.311603)
(xy 25.651208 89.311603) (xy 26.5 90.160395) (xy 27.348792 89.311603) (xy 27.271157 89.062528) (xy 27.007117 88.936629)
(xy 26.723589 88.864661) (xy 26.431469 88.849389) (xy 26.141981 88.891401) (xy 25.866253 88.989081) (xy 25.728843 89.062528)
(xy 25.651208 89.311603) (xy 24.629437 89.311603) (xy 24.541202 89.252647) (xy 24.317903 89.160153) (xy 24.080849 89.113)
(xy 23.839151 89.113) (xy 23.602097 89.160153) (xy 23.378798 89.252647) (xy 23.177833 89.386927) (xy 23.006927 89.557833)
(xy 22.872647 89.758798) (xy 22.780153 89.982097) (xy 22.733 90.219151) (xy 18.127 90.219151) (xy 18.127 82.97625)
(xy 18.18575 83.035) (xy 19 83.038072) (xy 19.124482 83.025812) (xy 19.24418 82.989502) (xy 19.354494 82.930537)
(xy 19.451185 82.851185) (xy 19.530537 82.754494) (xy 19.589502 82.64418) (xy 19.625812 82.524482) (xy 19.638072 82.4)
(xy 19.635 82.08575) (xy 19.47625 81.927) (xy 18.127 81.927) (xy 18.127 81.7) (xy 26.161928 81.7)
(xy 26.174188 81.824482) (xy 26.210498 81.94418) (xy 26.269463 82.054494) (xy 26.348815 82.151185) (xy 26.445506 82.230537)
(xy 26.55582 82.289502) (xy 26.675518 82.325812) (xy 26.8 82.338072) (xy 27.21425 82.335) (xy 27.373 82.17625)
(xy 27.373 81.027) (xy 27.627 81.027) (xy 27.627 82.17625) (xy 27.78575 82.335) (xy 28.2 82.338072)
(xy 28.324482 82.325812) (xy 28.44418 82.289502) (xy 28.554494 82.230537) (xy 28.651185 82.151185) (xy 28.730537 82.054494)
(xy 28.789502 81.94418) (xy 28.825812 81.824482) (xy 28.838072 81.7) (xy 28.835 81.18575) (xy 28.67625 81.027)
(xy 27.627 81.027) (xy 27.373 81.027) (xy 26.32375 81.027) (xy 26.165 81.18575) (xy 26.161928 81.7)
(xy 18.127 81.7) (xy 18.127 81.673) (xy 19.47625 81.673) (xy 19.635 81.51425) (xy 19.638072 81.2)
(xy 19.625812 81.075518) (xy 19.589502 80.95582) (xy 19.530537 80.845506) (xy 19.451185 80.748815) (xy 19.354494 80.669463)
(xy 19.24418 80.610498) (xy 19.124482 80.574188) (xy 19 80.561928) (xy 18.18575 80.565) (xy 18.127 80.62375)
(xy 18.127 80.1) (xy 26.161928 80.1) (xy 26.165 80.61425) (xy 26.32375 80.773) (xy 27.373 80.773)
(xy 27.373 79.62375) (xy 27.21425 79.465) (xy 26.8 79.461928) (xy 26.675518 79.474188) (xy 26.55582 79.510498)
(xy 26.445506 79.569463) (xy 26.348815 79.648815) (xy 26.269463 79.745506) (xy 26.210498 79.85582) (xy 26.174188 79.975518)
(xy 26.161928 80.1) (xy 18.127 80.1) (xy 18.127 77.713265) (xy 18.18121 77.659055) (xy 18.277187 77.515415)
(xy 18.343297 77.355811) (xy 18.377 77.186377) (xy 18.377 77.013623) (xy 18.343297 76.844189) (xy 18.277187 76.684585)
(xy 18.18121 76.540945) (xy 18.127 76.486735) (xy 18.127 69.713265) (xy 18.18121 69.659055) (xy 18.277187 69.515415)
(xy 18.343297 69.355811) (xy 18.377 69.186377) (xy 18.377 69.013623) (xy 18.343297 68.844189) (xy 18.277187 68.684585)
(xy 18.18121 68.540945) (xy 18.127 68.486735) (xy 18.127 67.47625) (xy 18.18575 67.535) (xy 19 67.538072)
(xy 19.124482 67.525812) (xy 19.24418 67.489502) (xy 19.354494 67.430537) (xy 19.451185 67.351185) (xy 19.530537 67.254494)
(xy 19.589502 67.14418) (xy 19.625812 67.024482) (xy 19.638072 66.9) (xy 19.635 66.58575) (xy 19.47625 66.427)
(xy 18.127 66.427) (xy 18.127 66.173) (xy 19.47625 66.173) (xy 19.635 66.01425) (xy 19.638072 65.7)
(xy 19.625812 65.575518) (xy 19.589502 65.45582) (xy 19.530537 65.345506) (xy 19.451185 65.248815) (xy 19.354494 65.169463)
(xy 19.24418 65.110498) (xy 19.124482 65.074188) (xy 19 65.061928) (xy 18.18575 65.065) (xy 18.127 65.12375)
(xy 18.127 61.431955) (xy 19.863 61.431955) (xy 19.863 61.648045) (xy 19.905157 61.859983) (xy 19.987851 62.059624)
(xy 20.107904 62.239297) (xy 20.260703 62.392096) (xy 20.440376 62.512149) (xy 20.640017 62.594843) (xy 20.851955 62.637)
(xy 21.068045 62.637) (xy 21.279983 62.594843) (xy 21.479624 62.512149) (xy 21.659297 62.392096) (xy 21.812096 62.239297)
(xy 21.932149 62.059624) (xy 22.014843 61.859983) (xy 22.057 61.648045) (xy 22.057 61.431955) (xy 22.014843 61.220017)
(xy 21.932149 61.020376) (xy 21.812096 60.840703) (xy 21.659297 60.687904) (xy 21.479624 60.567851) (xy 21.279983 60.485157)
(xy 21.068045 60.443) (xy 20.851955 60.443) (xy 20.640017 60.485157) (xy 20.440376 60.567851) (xy 20.260703 60.687904)
(xy 20.107904 60.840703) (xy 19.987851 61.020376) (xy 19.905157 61.220017) (xy 19.863 61.431955) (xy 18.127 61.431955)
(xy 18.127 60.323292) (xy 18.227027 60.347811) (xy 18.49368 60.359561) (xy 18.757501 60.319063) (xy 19.008353 60.227875)
(xy 19.114068 60.171368) (xy 19.175955 59.93556) (xy 18.42 59.179605) (xy 18.405858 59.193748) (xy 18.226253 59.014143)
(xy 18.240395 59) (xy 18.599605 59) (xy 19.35556 59.755955) (xy 19.591368 59.694068) (xy 19.704266 59.45221)
(xy 19.767811 59.192973) (xy 19.779561 58.92632) (xy 19.774286 58.891955) (xy 22.403 58.891955) (xy 22.403 59.108045)
(xy 22.445157 59.319983) (xy 22.527851 59.519624) (xy 22.647904 59.699297) (xy 22.800703 59.852096) (xy 22.980376 59.972149)
(xy 23.180017 60.054843) (xy 23.391955 60.097) (xy 23.608045 60.097) (xy 23.819983 60.054843) (xy 24.019624 59.972149)
(xy 24.199297 59.852096) (xy 24.352096 59.699297) (xy 24.472149 59.519624) (xy 24.554843 59.319983) (xy 24.597 59.108045)
(xy 24.597 58.891955) (xy 24.554843 58.680017) (xy 24.472149 58.480376) (xy 24.352096 58.300703) (xy 24.199297 58.147904)
(xy 24.019624 58.027851) (xy 23.819983 57.945157) (xy 23.608045 57.903) (xy 23.391955 57.903) (xy 23.180017 57.945157)
(xy 22.980376 58.027851) (xy 22.800703 58.147904) (xy 22.647904 58.300703) (xy 22.527851 58.480376) (xy 22.445157 58.680017)
(xy 22.403 58.891955) (xy 19.774286 58.891955) (xy 19.739063 58.662499) (xy 19.647875 58.411647) (xy 19.591368 58.305932)
(xy 19.35556 58.244045) (xy 18.599605 59) (xy 18.240395 59) (xy 18.226253 58.985858) (xy 18.405858 58.806253)
(xy 18.42 58.820395) (xy 19.175955 58.06444) (xy 19.114068 57.828632) (xy 18.87221 57.715734) (xy 18.612973 57.652189)
(xy 18.34632 57.640439) (xy 18.127 57.674106) (xy 18.127 55.849604) (xy 19.473 55.849604) (xy 19.473 56.150396)
(xy 19.531681 56.44541) (xy 19.64679 56.723306) (xy 19.813901 56.973406) (xy 20.026594 57.186099) (xy 20.276694 57.35321)
(xy 20.55459 57.468319) (xy 20.849604 57.527) (xy 21.150396 57.527) (xy 21.44541 57.468319) (xy 21.723306 57.35321)
(xy 21.973406 57.186099) (xy 22.186099 56.973406) (xy 22.35321 56.723306) (xy 22.468319 56.44541) (xy 22.527 56.150396)
(xy 22.527 55.849604) (xy 22.505945 55.74375) (xy 23.396176 55.74375) (xy 23.396176 56.25625) (xy 23.407658 56.372831)
(xy 23.441664 56.484932) (xy 23.496885 56.588244) (xy 23.571201 56.678799) (xy 23.661756 56.753115) (xy 23.765068 56.808336)
(xy 23.877169 56.842342) (xy 23.99375 56.853824) (xy 24.43125 56.853824) (xy 24.547831 56.842342) (xy 24.659932 56.808336)
(xy 24.763244 56.753115) (xy 24.853799 56.678799) (xy 24.928115 56.588244) (xy 24.983336 56.484932) (xy 25 56.429999)
(xy 25.016664 56.484932) (xy 25.071885 56.588244) (xy 25.146201 56.678799) (xy 25.236756 56.753115) (xy 25.340068 56.808336)
(xy 25.452169 56.842342) (xy 25.56875 56.853824) (xy 26.00625 56.853824) (xy 26.122831 56.842342) (xy 26.234932 56.808336)
(xy 26.338244 56.753115) (xy 26.428799 56.678799) (xy 26.503115 56.588244) (xy 26.53585 56.527) (xy 27.160141 56.527)
(xy 27.203004 56.55564) (xy 27.317111 56.602905) (xy 27.438246 56.627) (xy 27.561754 56.627) (xy 27.682889 56.602905)
(xy 27.796996 56.55564) (xy 27.899689 56.487023) (xy 27.987023 56.399689) (xy 28.05564 56.296996) (xy 28.102905 56.182889)
(xy 28.127 56.061754) (xy 28.127 55.938246) (xy 28.102905 55.817111) (xy 28.05564 55.703004) (xy 27.987023 55.600311)
(xy 27.899689 55.512977) (xy 27.796996 55.44436) (xy 27.682889 55.397095) (xy 27.561754 55.373) (xy 27.438246 55.373)
(xy 27.317111 55.397095) (xy 27.203004 55.44436) (xy 27.160141 55.473) (xy 26.53585 55.473) (xy 26.503115 55.411756)
(xy 26.428799 55.321201) (xy 26.338244 55.246885) (xy 26.234932 55.191664) (xy 26.122831 55.157658) (xy 26.00625 55.146176)
(xy 25.56875 55.146176) (xy 25.452169 55.157658) (xy 25.340068 55.191664) (xy 25.236756 55.246885) (xy 25.232008 55.250781)
(xy 25.45579 55.027) (xy 27.46415 55.027) (xy 27.496885 55.088244) (xy 27.571201 55.178799) (xy 27.661756 55.253115)
(xy 27.765068 55.308336) (xy 27.877169 55.342342) (xy 27.99375 55.353824) (xy 28.43125 55.353824) (xy 28.547831 55.342342)
(xy 28.659932 55.308336) (xy 28.763244 55.253115) (xy 28.773943 55.244334) (xy 28.819463 55.329494) (xy 28.898815 55.426185)
(xy 28.995506 55.505537) (xy 29.10582 55.564502) (xy 29.225518 55.600812) (xy 29.35 55.613072) (xy 29.50175 55.61)
(xy 29.6605 55.45125) (xy 29.6605 54.627) (xy 29.9145 54.627) (xy 29.9145 55.45125) (xy 30.07325 55.61)
(xy 30.225 55.613072) (xy 30.349482 55.600812) (xy 30.46918 55.564502) (xy 30.579494 55.505537) (xy 30.676185 55.426185)
(xy 30.755537 55.329494) (xy 30.814502 55.21918) (xy 30.850812 55.099482) (xy 30.863072 54.975) (xy 30.86 54.78575)
(xy 30.70125 54.627) (xy 29.9145 54.627) (xy 29.6605 54.627) (xy 29.6405 54.627) (xy 29.6405 54.373)
(xy 29.6605 54.373) (xy 29.6605 53.54875) (xy 29.9145 53.54875) (xy 29.9145 54.373) (xy 30.70125 54.373)
(xy 30.86 54.21425) (xy 30.863072 54.025) (xy 30.850812 53.900518) (xy 30.814502 53.78082) (xy 30.755537 53.670506)
(xy 30.676185 53.573815) (xy 30.579494 53.494463) (xy 30.46918 53.435498) (xy 30.349482 53.399188) (xy 30.225 53.386928)
(xy 30.07325 53.39) (xy 29.9145 53.54875) (xy 29.6605 53.54875) (xy 29.50175 53.39) (xy 29.35 53.386928)
(xy 29.225518 53.399188) (xy 29.10582 53.435498) (xy 28.995506 53.494463) (xy 28.898815 53.573815) (xy 28.819463 53.670506)
(xy 28.773943 53.755666) (xy 28.763244 53.746885) (xy 28.659932 53.691664) (xy 28.547831 53.657658) (xy 28.43125 53.646176)
(xy 27.99375 53.646176) (xy 27.877169 53.657658) (xy 27.765068 53.691664) (xy 27.661756 53.746885) (xy 27.571201 53.821201)
(xy 27.496885 53.911756) (xy 27.46415 53.973) (xy 25.263381 53.973) (xy 25.2375 53.970451) (xy 25.211619 53.973)
(xy 25.13419 53.980626) (xy 25.03485 54.010761) (xy 24.943298 54.059696) (xy 24.863052 54.125552) (xy 24.846549 54.145661)
(xy 23.858162 55.134049) (xy 23.838053 55.150552) (xy 23.817322 55.175813) (xy 23.765068 55.191664) (xy 23.661756 55.246885)
(xy 23.571201 55.321201) (xy 23.496885 55.411756) (xy 23.441664 55.515068) (xy 23.407658 55.627169) (xy 23.396176 55.74375)
(xy 22.505945 55.74375) (xy 22.468319 55.55459) (xy 22.35321 55.276694) (xy 22.186099 55.026594) (xy 21.973406 54.813901)
(xy 21.723306 54.64679) (xy 21.44541 54.531681) (xy 21.150396 54.473) (xy 20.849604 54.473) (xy 20.55459 54.531681)
(xy 20.276694 54.64679) (xy 20.026594 54.813901) (xy 19.813901 55.026594) (xy 19.64679 55.276694) (xy 19.531681 55.55459)
(xy 19.473 55.849604) (xy 18.127 55.849604) (xy 18.127 51.849604) (xy 19.473 51.849604) (xy 19.473 52.150396)
(xy 19.531681 52.44541) (xy 19.64679 52.723306) (xy 19.813901 52.973406) (xy 20.026594 53.186099) (xy 20.276694 53.35321)
(xy 20.55459 53.468319) (xy 20.849604 53.527) (xy 21.150396 53.527) (xy 21.44541 53.468319) (xy 21.723306 53.35321)
(xy 21.973406 53.186099) (xy 22.186099 52.973406) (xy 22.35321 52.723306) (xy 22.468319 52.44541) (xy 22.527 52.150396)
(xy 22.527 51.849604) (xy 22.468319 51.55459) (xy 22.35321 51.276694) (xy 22.186099 51.026594) (xy 21.973406 50.813901)
(xy 21.723306 50.64679) (xy 21.44541 50.531681) (xy 21.150396 50.473) (xy 20.849604 50.473) (xy 20.55459 50.531681)
(xy 20.276694 50.64679) (xy 20.026594 50.813901) (xy 19.813901 51.026594) (xy 19.64679 51.276694) (xy 19.531681 51.55459)
(xy 19.473 51.849604) (xy 18.127 51.849604) (xy 18.127 49.24375) (xy 23.396176 49.24375) (xy 23.396176 49.75625)
(xy 23.407658 49.872831) (xy 23.441664 49.984932) (xy 23.496885 50.088244) (xy 23.571201 50.178799) (xy 23.661756 50.253115)
(xy 23.6855 50.265806) (xy 23.685501 51.234193) (xy 23.661756 51.246885) (xy 23.571201 51.321201) (xy 23.496885 51.411756)
(xy 23.441664 51.515068) (xy 23.407658 51.627169) (xy 23.396176 51.74375) (xy 23.396176 52.25625) (xy 23.407658 52.372831)
(xy 23.441664 52.484932) (xy 23.496885 52.588244) (xy 23.571201 52.678799) (xy 23.661756 52.753115) (xy 23.765068 52.808336)
(xy 23.877169 52.842342) (xy 23.99375 52.853824) (xy 24.43125 52.853824) (xy 24.547831 52.842342) (xy 24.659932 52.808336)
(xy 24.763244 52.753115) (xy 24.853799 52.678799) (xy 24.928115 52.588244) (xy 24.983336 52.484932) (xy 25 52.429999)
(xy 25.016664 52.484932) (xy 25.071885 52.588244) (xy 25.146201 52.678799) (xy 25.236756 52.753115) (xy 25.340068 52.808336)
(xy 25.452169 52.842342) (xy 25.56875 52.853824) (xy 26.00625 52.853824) (xy 26.122831 52.842342) (xy 26.234932 52.808336)
(xy 26.338244 52.753115) (xy 26.428799 52.678799) (xy 26.503115 52.588244) (xy 26.53585 52.527) (xy 26.660141 52.527)
(xy 26.703004 52.55564) (xy 26.817111 52.602905) (xy 26.938246 52.627) (xy 27.061754 52.627) (xy 27.182889 52.602905)
(xy 27.296996 52.55564) (xy 27.399689 52.487023) (xy 27.487023 52.399689) (xy 27.55564 52.296996) (xy 27.602905 52.182889)
(xy 27.627 52.061754) (xy 27.627 51.938246) (xy 27.602905 51.817111) (xy 27.55564 51.703004) (xy 27.487023 51.600311)
(xy 27.399689 51.512977) (xy 27.296996 51.44436) (xy 27.182889 51.397095) (xy 27.061754 51.373) (xy 26.938246 51.373)
(xy 26.817111 51.397095) (xy 26.703004 51.44436) (xy 26.660141 51.473) (xy 26.53585 51.473) (xy 26.503115 51.411756)
(xy 26.428799 51.321201) (xy 26.338244 51.246885) (xy 26.234932 51.191664) (xy 26.122831 51.157658) (xy 26.00625 51.146176)
(xy 25.56875 51.146176) (xy 25.452169 51.157658) (xy 25.340068 51.191664) (xy 25.236756 51.246885) (xy 25.146201 51.321201)
(xy 25.071885 51.411756) (xy 25.016664 51.515068) (xy 25 51.570001) (xy 24.983336 51.515068) (xy 24.928115 51.411756)
(xy 24.853799 51.321201) (xy 24.763244 51.246885) (xy 24.7395 51.234194) (xy 24.7395 50.265806) (xy 24.763244 50.253115)
(xy 24.773943 50.244334) (xy 24.819463 50.329494) (xy 24.898815 50.426185) (xy 24.995506 50.505537) (xy 25.10582 50.564502)
(xy 25.225518 50.600812) (xy 25.35 50.613072) (xy 25.50175 50.61) (xy 25.6605 50.45125) (xy 25.6605 49.627)
(xy 25.9145 49.627) (xy 25.9145 50.45125) (xy 26.07325 50.61) (xy 26.225 50.613072) (xy 26.349482 50.600812)
(xy 26.46918 50.564502) (xy 26.579494 50.505537) (xy 26.676185 50.426185) (xy 26.755537 50.329494) (xy 26.814502 50.21918)
(xy 26.850812 50.099482) (xy 26.863072 49.975) (xy 26.86 49.78575) (xy 26.70125 49.627) (xy 25.9145 49.627)
(xy 25.6605 49.627) (xy 25.6405 49.627) (xy 25.6405 49.373) (xy 25.6605 49.373) (xy 25.6605 48.54875)
(xy 25.9145 48.54875) (xy 25.9145 49.373) (xy 26.70125 49.373) (xy 26.86 49.21425) (xy 26.863072 49.025)
(xy 26.853224 48.925) (xy 28.161928 48.925) (xy 28.174188 49.049482) (xy 28.210498 49.16918) (xy 28.269463 49.279494)
(xy 28.348815 49.376185) (xy 28.445506 49.455537) (xy 28.55582 49.514502) (xy 28.675518 49.550812) (xy 28.8 49.563072)
(xy 29.21425 49.56) (xy 29.373 49.40125) (xy 29.373 48.5645) (xy 29.627 48.5645) (xy 29.627 49.40125)
(xy 29.78575 49.56) (xy 30.2 49.563072) (xy 30.324482 49.550812) (xy 30.44418 49.514502) (xy 30.554494 49.455537)
(xy 30.651185 49.376185) (xy 30.730537 49.279494) (xy 30.789502 49.16918) (xy 30.825812 49.049482) (xy 30.838072 48.925)
(xy 30.835 48.72325) (xy 30.67625 48.5645) (xy 29.627 48.5645) (xy 29.373 48.5645) (xy 28.32375 48.5645)
(xy 28.165 48.72325) (xy 28.161928 48.925) (xy 26.853224 48.925) (xy 26.850812 48.900518) (xy 26.814502 48.78082)
(xy 26.755537 48.670506) (xy 26.676185 48.573815) (xy 26.579494 48.494463) (xy 26.46918 48.435498) (xy 26.349482 48.399188)
(xy 26.225 48.386928) (xy 26.07325 48.39) (xy 25.9145 48.54875) (xy 25.6605 48.54875) (xy 25.50175 48.39)
(xy 25.35 48.386928) (xy 25.225518 48.399188) (xy 25.10582 48.435498) (xy 24.995506 48.494463) (xy 24.898815 48.573815)
(xy 24.819463 48.670506) (xy 24.773943 48.755666) (xy 24.763244 48.746885) (xy 24.659932 48.691664) (xy 24.547831 48.657658)
(xy 24.43125 48.646176) (xy 23.99375 48.646176) (xy 23.877169 48.657658) (xy 23.765068 48.691664) (xy 23.661756 48.746885)
(xy 23.571201 48.821201) (xy 23.496885 48.911756) (xy 23.441664 49.015068) (xy 23.407658 49.127169) (xy 23.396176 49.24375)
(xy 18.127 49.24375) (xy 18.127 25.815132) (xy 28.373 25.815132) (xy 28.373 26.184868) (xy 28.445132 26.547501)
(xy 28.586624 26.889093) (xy 28.792039 27.196518) (xy 29.053482 27.457961) (xy 29.360907 27.663376) (xy 29.702499 27.804868)
(xy 30.065132 27.877) (xy 30.434868 27.877) (xy 30.797501 27.804868) (xy 31.139093 27.663376) (xy 31.446518 27.457961)
(xy 31.707961 27.196518) (xy 31.913376 26.889093) (xy 31.918385 26.877) (xy 42.636735 26.877) (xy 44.623 28.863266)
(xy 44.623001 34.349888) (xy 44.622213 34.350414) (xy 44.430414 34.542213) (xy 44.279718 34.767746) (xy 44.175917 35.018344)
(xy 44.123 35.284377) (xy 44.123 35.555623) (xy 44.175917 35.821656) (xy 44.279718 36.072254) (xy 44.430414 36.297787)
(xy 44.622213 36.489586) (xy 44.847746 36.640282) (xy 45.098344 36.744083) (xy 45.364377 36.797) (xy 45.635623 36.797)
(xy 45.901656 36.744083) (xy 46.152254 36.640282) (xy 46.377787 36.489586) (xy 46.569586 36.297787) (xy 46.720282 36.072254)
(xy 46.824083 35.821656) (xy 46.828304 35.800435) (xy 48.989871 35.800435) (xy 49.094644 36.103344) (xy 49.256499 36.379992)
(xy 49.469215 36.619748) (xy 49.724618 36.813399) (xy 50.012893 36.953502) (xy 50.199566 37.010124) (xy 50.453 36.890777)
(xy 50.453 35.547) (xy 50.707 35.547) (xy 50.707 36.890777) (xy 50.960434 37.010124) (xy 51.147107 36.953502)
(xy 51.435382 36.813399) (xy 51.690785 36.619748) (xy 51.903501 36.379992) (xy 52.065356 36.103344) (xy 52.170129 35.800435)
(xy 52.051315 35.547) (xy 50.707 35.547) (xy 50.453 35.547) (xy 49.108685 35.547) (xy 48.989871 35.800435)
(xy 46.828304 35.800435) (xy 46.877 35.555623) (xy 46.877 35.284377) (xy 46.828305 35.039565) (xy 48.989871 35.039565)
(xy 49.108685 35.293) (xy 50.453 35.293) (xy 50.453 33.949223) (xy 50.707 33.949223) (xy 50.707 35.293)
(xy 52.051315 35.293) (xy 52.170129 35.039565) (xy 52.065356 34.736656) (xy 51.903501 34.460008) (xy 51.690785 34.220252)
(xy 51.435382 34.026601) (xy 51.147107 33.886498) (xy 50.960434 33.829876) (xy 50.707 33.949223) (xy 50.453 33.949223)
(xy 50.199566 33.829876) (xy 50.012893 33.886498) (xy 49.724618 34.026601) (xy 49.469215 34.220252) (xy 49.256499 34.460008)
(xy 49.094644 34.736656) (xy 48.989871 35.039565) (xy 46.828305 35.039565) (xy 46.824083 35.018344) (xy 46.720282 34.767746)
(xy 46.569586 34.542213) (xy 46.377787 34.350414) (xy 46.377 34.349888) (xy 46.377 28.543079) (xy 46.381243 28.5)
(xy 46.36431 28.328077) (xy 46.314162 28.162763) (xy 46.297201 28.131031) (xy 46.232727 28.010408) (xy 46.123133 27.876867)
(xy 46.089675 27.849409) (xy 44.055398 25.815132) (xy 50.873 25.815132) (xy 50.873 26.184868) (xy 50.945132 26.547501)
(xy 51.086624 26.889093) (xy 51.292039 27.196518) (xy 51.553482 27.457961) (xy 51.860907 27.663376) (xy 52.202499 27.804868)
(xy 52.565132 27.877) (xy 52.934868 27.877) (xy 53.297501 27.804868) (xy 53.309594 27.799859) (xy 56.599408 31.089674)
(xy 56.626867 31.123133) (xy 56.660326 31.150592) (xy 56.660328 31.150594) (xy 56.725427 31.204019) (xy 56.760408 31.232727)
(xy 56.912763 31.314162) (xy 57.078077 31.36431) (xy 57.249999 31.381243) (xy 57.293079 31.377) (xy 58.929888 31.377)
(xy 58.930414 31.377787) (xy 59.122213 31.569586) (xy 59.347746 31.720282) (xy 59.598344 31.824083) (xy 59.864377 31.877)
(xy 60.135623 31.877) (xy 60.401656 31.824083) (xy 60.652254 31.720282) (xy 60.877787 31.569586) (xy 61.069586 31.377787)
(xy 61.220282 31.152254) (xy 61.324083 30.901656) (xy 61.377 30.635623) (xy 61.377 30.364377) (xy 61.324083 30.098344)
(xy 61.220282 29.847746) (xy 61.069586 29.622213) (xy 60.877787 29.430414) (xy 60.652254 29.279718) (xy 60.401656 29.175917)
(xy 60.135623 29.123) (xy 59.864377 29.123) (xy 59.598344 29.175917) (xy 59.347746 29.279718) (xy 59.122213 29.430414)
(xy 58.930414 29.622213) (xy 58.929888 29.623) (xy 57.613266 29.623) (xy 54.549859 26.559594) (xy 54.554868 26.547501)
(xy 54.627 26.184868) (xy 54.627 25.815132) (xy 54.554868 25.452499) (xy 54.413376 25.110907) (xy 54.207961 24.803482)
(xy 53.946518 24.542039) (xy 53.639093 24.336624) (xy 53.297501 24.195132) (xy 52.934868 24.123) (xy 52.565132 24.123)
(xy 52.202499 24.195132) (xy 51.860907 24.336624) (xy 51.553482 24.542039) (xy 51.292039 24.803482) (xy 51.086624 25.110907)
(xy 50.945132 25.452499) (xy 50.873 25.815132) (xy 44.055398 25.815132) (xy 43.650597 25.410332) (xy 43.623133 25.376867)
(xy 43.489592 25.267273) (xy 43.337237 25.185838) (xy 43.171922 25.13569) (xy 43.043079 25.123) (xy 43 25.118757)
(xy 42.956921 25.123) (xy 31.918385 25.123) (xy 31.913376 25.110907) (xy 31.707961 24.803482) (xy 31.446518 24.542039)
(xy 31.139093 24.336624) (xy 30.797501 24.195132) (xy 30.434868 24.123) (xy 30.065132 24.123) (xy 29.702499 24.195132)
(xy 29.360907 24.336624) (xy 29.053482 24.542039) (xy 28.792039 24.803482) (xy 28.586624 25.110907) (xy 28.445132 25.452499)
(xy 28.373 25.815132) (xy 18.127 25.815132) (xy 18.127 22.525) (xy 24.986928 22.525) (xy 24.999188 22.649482)
(xy 25.035498 22.76918) (xy 25.094463 22.879494) (xy 25.173815 22.976185) (xy 25.270506 23.055537) (xy 25.38082 23.114502)
(xy 25.500518 23.150812) (xy 25.625 23.163072) (xy 26.21425 23.16) (xy 26.373 23.00125) (xy 26.373 22.027)
(xy 26.627 22.027) (xy 26.627 23.00125) (xy 26.78575 23.16) (xy 27.375 23.163072) (xy 27.499482 23.150812)
(xy 27.61918 23.114502) (xy 27.729494 23.055537) (xy 27.826185 22.976185) (xy 27.905537 22.879494) (xy 27.964502 22.76918)
(xy 28.000812 22.649482) (xy 28.013072 22.525) (xy 28.01 22.18575) (xy 27.85125 22.027) (xy 26.627 22.027)
(xy 26.373 22.027) (xy 25.14875 22.027) (xy 24.99 22.18575) (xy 24.986928 22.525) (xy 18.127 22.525)
(xy 18.127 21.725) (xy 21.386928 21.725) (xy 21.399188 21.849482) (xy 21.435498 21.96918) (xy 21.494463 22.079494)
(xy 21.573815 22.176185) (xy 21.670506 22.255537) (xy 21.78082 22.314502) (xy 21.900518 22.350812) (xy 22.025 22.363072)
(xy 22.21425 22.36) (xy 22.373 22.20125) (xy 22.373 21.4145) (xy 22.627 21.4145) (xy 22.627 22.20125)
(xy 22.78575 22.36) (xy 22.975 22.363072) (xy 23.099482 22.350812) (xy 23.21918 22.314502) (xy 23.329494 22.255537)
(xy 23.426185 22.176185) (xy 23.505537 22.079494) (xy 23.564502 21.96918) (xy 23.600812 21.849482) (xy 23.613072 21.725)
(xy 23.61 21.57325) (xy 23.45125 21.4145) (xy 22.627 21.4145) (xy 22.373 21.4145) (xy 21.54875 21.4145)
(xy 21.39 21.57325) (xy 21.386928 21.725) (xy 18.127 21.725) (xy 18.127 21.275) (xy 24.986928 21.275)
(xy 24.99 21.61425) (xy 25.14875 21.773) (xy 26.373 21.773) (xy 26.373 20.79875) (xy 26.627 20.79875)
(xy 26.627 21.773) (xy 27.85125 21.773) (xy 28.01 21.61425) (xy 28.013072 21.275) (xy 28.000812 21.150518)
(xy 27.964502 21.03082) (xy 27.905537 20.920506) (xy 27.826185 20.823815) (xy 27.729494 20.744463) (xy 27.61918 20.685498)
(xy 27.499482 20.649188) (xy 27.375 20.636928) (xy 26.78575 20.64) (xy 26.627 20.79875) (xy 26.373 20.79875)
(xy 26.21425 20.64) (xy 25.625 20.636928) (xy 25.500518 20.649188) (xy 25.38082 20.685498) (xy 25.270506 20.744463)
(xy 25.173815 20.823815) (xy 25.094463 20.920506) (xy 25.035498 21.03082) (xy 24.999188 21.150518) (xy 24.986928 21.275)
(xy 18.127 21.275) (xy 18.127 18.145981) (xy 18.136715 18.136198) (xy 18.146108 18.127) (xy 21.823001 18.127)
fix sym lib table and refill zones
2020-01-04 20:52:22 +01:00
)
)
Schematic beautify and layout improvments, Length matching for SDIO
2019-12-25 19:15:32 +01:00
(filled_polygon
(pts
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 43.399188 104.150518) (xy 43.386928 104.275) (xy 43.39 104.42675) (xy 43.54875 104.5855) (xy 44.373 104.5855)
(xy 44.373 104.5655) (xy 44.627 104.5655) (xy 44.627 104.5855) (xy 44.647 104.5855) (xy 44.647 104.8395)
(xy 44.627 104.8395) (xy 44.627 104.8595) (xy 44.373 104.8595) (xy 44.373 104.8395) (xy 43.54875 104.8395)
(xy 43.39 104.99825) (xy 43.386928 105.15) (xy 43.399188 105.274482) (xy 43.435498 105.39418) (xy 43.494463 105.504494)
(xy 43.573815 105.601185) (xy 43.670506 105.680537) (xy 43.755666 105.726057) (xy 43.746885 105.736756) (xy 43.691664 105.840068)
(xy 43.657658 105.952169) (xy 43.646176 106.06875) (xy 43.646176 106.50625) (xy 43.657658 106.622831) (xy 43.691664 106.734932)
(xy 43.746885 106.838244) (xy 43.821201 106.928799) (xy 43.911756 107.003115) (xy 44.015068 107.058336) (xy 44.127169 107.092342)
(xy 44.24375 107.103824) (xy 44.75625 107.103824) (xy 44.872831 107.092342) (xy 44.984932 107.058336) (xy 45.088244 107.003115)
(xy 45.178799 106.928799) (xy 45.221176 106.877162) (xy 45.221176 107.3) (xy 45.228455 107.373905) (xy 45.250012 107.44497)
(xy 45.285019 107.510463) (xy 45.332131 107.567869) (xy 45.389537 107.614981) (xy 45.45503 107.649988) (xy 45.526095 107.671545)
(xy 45.6 107.678824) (xy 47.4 107.678824) (xy 47.473905 107.671545) (xy 47.54497 107.649988) (xy 47.610463 107.614981)
(xy 47.667869 107.567869) (xy 47.714981 107.510463) (xy 47.749988 107.44497) (xy 47.771545 107.373905) (xy 47.778824 107.3)
(xy 47.778824 107.232756) (xy 47.843004 107.27564) (xy 47.957111 107.322905) (xy 48.078246 107.347) (xy 48.201754 107.347)
(xy 48.322889 107.322905) (xy 48.378186 107.3) (xy 48.961928 107.3) (xy 48.974188 107.424482) (xy 49.010498 107.54418)
(xy 49.069463 107.654494) (xy 49.148815 107.751185) (xy 49.245506 107.830537) (xy 49.35582 107.889502) (xy 49.475518 107.925812)
(xy 49.6 107.938072) (xy 50.21425 107.935) (xy 50.373 107.77625) (xy 50.373 106.827) (xy 49.12375 106.827)
(xy 48.965 106.98575) (xy 48.961928 107.3) (xy 48.378186 107.3) (xy 48.436996 107.27564) (xy 48.539689 107.207023)
(xy 48.627023 107.119689) (xy 48.69564 107.016996) (xy 48.742905 106.902889) (xy 48.767 106.781754) (xy 48.767 106.658246)
(xy 48.742905 106.537111) (xy 48.69564 106.423004) (xy 48.627023 106.320311) (xy 48.539689 106.232977) (xy 48.527 106.224499)
(xy 48.527 106.1) (xy 48.961928 106.1) (xy 48.965 106.41425) (xy 49.12375 106.573) (xy 50.373 106.573)
(xy 50.373 105.62375) (xy 50.21425 105.465) (xy 49.6 105.461928) (xy 49.475518 105.474188) (xy 49.35582 105.510498)
(xy 49.245506 105.569463) (xy 49.148815 105.648815) (xy 49.069463 105.745506) (xy 49.010498 105.85582) (xy 48.974188 105.975518)
(xy 48.961928 106.1) (xy 48.527 106.1) (xy 48.527 104.605845) (xy 48.562977 104.659689) (xy 48.650311 104.747023)
(xy 48.753004 104.81564) (xy 48.867111 104.862905) (xy 48.988246 104.887) (xy 49.111754 104.887) (xy 49.221176 104.865235)
(xy 49.221176 104.9) (xy 49.228455 104.973905) (xy 49.250012 105.04497) (xy 49.285019 105.110463) (xy 49.332131 105.167869)
(xy 49.389537 105.214981) (xy 49.45503 105.249988) (xy 49.526095 105.271545) (xy 49.6 105.278824) (xy 51.4 105.278824)
(xy 51.473905 105.271545) (xy 51.54497 105.249988) (xy 51.564592 105.2395) (xy 51.734194 105.2395) (xy 51.746885 105.263244)
(xy 51.755666 105.273943) (xy 51.670506 105.319463) (xy 51.573815 105.398815) (xy 51.512895 105.473047) (xy 51.4 105.461928)
(xy 50.78575 105.465) (xy 50.627 105.62375) (xy 50.627 106.573) (xy 50.647 106.573) (xy 50.647 106.827)
(xy 50.627 106.827) (xy 50.627 107.77625) (xy 50.78575 107.935) (xy 51.4 107.938072) (xy 51.524482 107.925812)
(xy 51.64418 107.889502) (xy 51.754494 107.830537) (xy 51.851185 107.751185) (xy 51.930537 107.654494) (xy 51.989502 107.54418)
(xy 52.025812 107.424482) (xy 52.031871 107.36296) (xy 52.21425 107.36) (xy 52.373 107.20125) (xy 52.373 106.4145)
(xy 52.627 106.4145) (xy 52.627 107.20125) (xy 52.78575 107.36) (xy 52.975 107.363072) (xy 53.099482 107.350812)
(xy 53.21918 107.314502) (xy 53.329494 107.255537) (xy 53.426185 107.176185) (xy 53.505537 107.079494) (xy 53.564502 106.96918)
(xy 53.600812 106.849482) (xy 53.613072 106.725) (xy 53.61 106.57325) (xy 53.45125 106.4145) (xy 52.627 106.4145)
(xy 52.373 106.4145) (xy 52.353 106.4145) (xy 52.353 106.1605) (xy 52.373 106.1605) (xy 52.373 106.1405)
(xy 52.627 106.1405) (xy 52.627 106.1605) (xy 53.45125 106.1605) (xy 53.61 106.00175) (xy 53.613072 105.85)
(xy 53.600812 105.725518) (xy 53.564502 105.60582) (xy 53.505537 105.495506) (xy 53.426185 105.398815) (xy 53.329494 105.319463)
(xy 53.244334 105.273943) (xy 53.253115 105.263244) (xy 53.308336 105.159932) (xy 53.342342 105.047831) (xy 53.353824 104.93125)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(xy 53.353824 104.49375) (xy 53.342342 104.377169) (xy 53.308336 104.265068) (xy 53.283715 104.219004) (xy 53.698778 104.634068)
(xy 53.679443 104.644403) (xy 53.660197 104.660197) (xy 53.644403 104.679443) (xy 53.632667 104.701399) (xy 53.62544 104.725224)
(xy 53.623 104.75) (xy 53.623 108.373) (xy 43.127 108.373) (xy 43.127 104.08079) (xy 43.16079 104.047)
(xy 43.43059 104.047)
)
)
(filled_polygon
(pts
(xy 62.146176 87.43125) (xy 62.157658 87.547831) (xy 62.191664 87.659932) (xy 62.246885 87.763244) (xy 62.321201 87.853799)
(xy 62.411756 87.928115) (xy 62.515068 87.983336) (xy 62.570001 88) (xy 62.515068 88.016664) (xy 62.411756 88.071885)
(xy 62.321201 88.146201) (xy 62.246885 88.236756) (xy 62.191664 88.340068) (xy 62.157658 88.452169) (xy 62.146176 88.56875)
(xy 62.146176 89.00625) (xy 62.157658 89.122831) (xy 62.191664 89.234932) (xy 62.246885 89.338244) (xy 62.321201 89.428799)
(xy 62.411756 89.503115) (xy 62.515068 89.558336) (xy 62.627169 89.592342) (xy 62.74375 89.603824) (xy 63.25625 89.603824)
(xy 63.372831 89.592342) (xy 63.484932 89.558336) (xy 63.588244 89.503115) (xy 63.678799 89.428799) (xy 63.75 89.34204)
(xy 63.821201 89.428799) (xy 63.911756 89.503115) (xy 64.015068 89.558336) (xy 64.127169 89.592342) (xy 64.24375 89.603824)
(xy 64.75625 89.603824) (xy 64.872831 89.592342) (xy 64.984932 89.558336) (xy 65.088244 89.503115) (xy 65.178799 89.428799)
(xy 65.253115 89.338244) (xy 65.265806 89.3145) (xy 66.303563 89.3145) (xy 66.320153 89.397903) (xy 66.412647 89.621202)
(xy 66.546927 89.822167) (xy 66.717833 89.993073) (xy 66.918798 90.127353) (xy 67.142097 90.219847) (xy 67.379151 90.267)
(xy 67.620849 90.267) (xy 67.857903 90.219847) (xy 67.937105 90.18704) (xy 68.337603 90.587538) (xy 68.353316 90.606684)
(xy 68.372462 90.622397) (xy 68.372464 90.622399) (xy 68.402556 90.647095) (xy 68.429755 90.669417) (xy 68.516964 90.716031)
(xy 68.611591 90.744736) (xy 68.685347 90.752) (xy 68.685356 90.752) (xy 68.709999 90.754427) (xy 68.734642 90.752)
(xy 69.967066 90.752) (xy 70.090518 90.875453) (xy 70.041334 90.89171) (xy 69.93251 90.953381) (xy 69.837808 91.035097)
(xy 69.790157 91.096176) (xy 69.65 91.096176) (xy 69.576095 91.103455) (xy 69.50503 91.125012) (xy 69.439537 91.160019)
(xy 69.382131 91.207131) (xy 69.335019 91.264537) (xy 69.300012 91.33003) (xy 69.278455 91.401095) (xy 69.271176 91.475)
(xy 69.271176 92.125) (xy 69.278455 92.198905) (xy 69.295958 92.256606) (xy 69.082157 92.470407) (xy 68.95125 92.3395)
(xy 68.127 92.3395) (xy 68.127 92.3595) (xy 67.873 92.3595) (xy 67.873 92.3395) (xy 67.04875 92.3395)
(xy 66.89 92.49825) (xy 66.886928 92.65) (xy 66.899188 92.774482) (xy 66.935498 92.89418) (xy 66.994463 93.004494)
(xy 67.073815 93.101185) (xy 67.170506 93.180537) (xy 67.255666 93.226057) (xy 67.246885 93.236756) (xy 67.191664 93.340068)
(xy 67.157658 93.452169) (xy 67.146176 93.56875) (xy 67.146176 94.00625) (xy 67.157658 94.122831) (xy 67.191664 94.234932)
(xy 67.246885 94.338244) (xy 67.321201 94.428799) (xy 67.411756 94.503115) (xy 67.498 94.549213) (xy 67.498001 94.700787)
(xy 67.411756 94.746885) (xy 67.321201 94.821201) (xy 67.246885 94.911756) (xy 67.191664 95.015068) (xy 67.157658 95.127169)
(xy 67.146176 95.24375) (xy 67.146176 95.75625) (xy 67.157658 95.872831) (xy 67.191664 95.984932) (xy 67.246885 96.088244)
(xy 67.321201 96.178799) (xy 67.40796 96.25) (xy 67.321201 96.321201) (xy 67.246885 96.411756) (xy 67.191664 96.515068)
(xy 67.157658 96.627169) (xy 67.146176 96.74375) (xy 67.146176 97.25625) (xy 67.157658 97.372831) (xy 67.191664 97.484932)
(xy 67.246885 97.588244) (xy 67.321201 97.678799) (xy 67.411756 97.753115) (xy 67.515068 97.808336) (xy 67.627169 97.842342)
(xy 67.74375 97.853824) (xy 68.18125 97.853824) (xy 68.297831 97.842342) (xy 68.409932 97.808336) (xy 68.513244 97.753115)
(xy 68.603799 97.678799) (xy 68.678115 97.588244) (xy 68.733336 97.484932) (xy 68.75 97.429999) (xy 68.766664 97.484932)
(xy 68.821885 97.588244) (xy 68.896201 97.678799) (xy 68.986756 97.753115) (xy 69.090068 97.808336) (xy 69.202169 97.842342)
(xy 69.31875 97.853824) (xy 69.75625 97.853824) (xy 69.872831 97.842342) (xy 69.984932 97.808336) (xy 70.088244 97.753115)
(xy 70.178799 97.678799) (xy 70.253115 97.588244) (xy 70.274934 97.547423) (xy 70.321201 97.603799) (xy 70.411756 97.678115)
(xy 70.515068 97.733336) (xy 70.570001 97.75) (xy 70.515068 97.766664) (xy 70.411756 97.821885) (xy 70.321201 97.896201)
(xy 70.246885 97.986756) (xy 70.191664 98.090068) (xy 70.157658 98.202169) (xy 70.146176 98.31875) (xy 70.146176 98.75625)
(xy 70.157658 98.872831) (xy 70.191664 98.984932) (xy 70.246885 99.088244) (xy 70.321201 99.178799) (xy 70.411756 99.253115)
(xy 70.515068 99.308336) (xy 70.544789 99.317352) (xy 70.545526 99.31825) (xy 70.571963 99.350464) (xy 70.571966 99.350467)
(xy 70.590027 99.372474) (xy 70.612033 99.390534) (xy 71.231854 100.010356) (xy 70.895662 100.346549) (xy 70.875553 100.363052)
(xy 70.829442 100.419239) (xy 70.809696 100.443299) (xy 70.760761 100.534851) (xy 70.730626 100.634191) (xy 70.720451 100.7375)
(xy 70.723001 100.763391) (xy 70.723 102.646176) (xy 70.24375 102.646176) (xy 70.127169 102.657658) (xy 70.015068 102.691664)
(xy 69.911756 102.746885) (xy 69.821201 102.821201) (xy 69.746885 102.911756) (xy 69.691664 103.015068) (xy 69.657658 103.127169)
(xy 69.646176 103.24375) (xy 69.646176 103.68125) (xy 69.657658 103.797831) (xy 69.691664 103.909932) (xy 69.746885 104.013244)
(xy 69.821201 104.103799) (xy 69.911756 104.178115) (xy 70.015068 104.233336) (xy 70.070001 104.25) (xy 70.015068 104.266664)
(xy 69.911756 104.321885) (xy 69.821201 104.396201) (xy 69.746885 104.486756) (xy 69.691664 104.590068) (xy 69.657658 104.702169)
(xy 69.646176 104.81875) (xy 69.646176 105.25625) (xy 69.657658 105.372831) (xy 69.691664 105.484932) (xy 69.710165 105.519545)
(xy 69.256711 105.973) (xy 61.369141 105.973) (xy 61.426185 105.926185) (xy 61.505537 105.829494) (xy 61.564502 105.71918)
(xy 61.600812 105.599482) (xy 61.613072 105.475) (xy 61.61 105.28575) (xy 61.45125 105.127) (xy 60.6645 105.127)
(xy 60.6645 105.147) (xy 60.4105 105.147) (xy 60.4105 105.127) (xy 60.3905 105.127) (xy 60.3905 104.873)
(xy 60.4105 104.873) (xy 60.4105 104.853) (xy 60.6645 104.853) (xy 60.6645 104.873) (xy 61.45125 104.873)
(xy 61.61 104.71425) (xy 61.613072 104.525) (xy 61.600812 104.400518) (xy 61.564502 104.28082) (xy 61.505537 104.170506)
(xy 61.426185 104.073815) (xy 61.329494 103.994463) (xy 61.21918 103.935498) (xy 61.099482 103.899188) (xy 60.975 103.886928)
(xy 60.82325 103.89) (xy 60.664502 104.048748) (xy 60.664502 103.960418) (xy 60.744646 103.894646) (xy 60.822848 103.799356)
(xy 60.880958 103.690641) (xy 60.916741 103.572678) (xy 60.928824 103.450001) (xy 60.928824 102.549999) (xy 60.916741 102.427322)
(xy 60.880958 102.309359) (xy 60.822848 102.200644) (xy 60.744646 102.105354) (xy 60.649356 102.027152) (xy 60.540641 101.969042)
(xy 60.502 101.957321) (xy 60.502 101.846856) (xy 60.547831 101.842342) (xy 60.659932 101.808336) (xy 60.763244 101.753115)
(xy 60.773943 101.744334) (xy 60.819463 101.829494) (xy 60.898815 101.926185) (xy 60.995506 102.005537) (xy 61.10582 102.064502)
(xy 61.225518 102.100812) (xy 61.257099 102.103922) (xy 61.255354 102.105354) (xy 61.177152 102.200644) (xy 61.119042 102.309359)
(xy 61.083259 102.427322) (xy 61.071176 102.549999) (xy 61.071176 103.450001) (xy 61.083259 103.572678) (xy 61.119042 103.690641)
(xy 61.177152 103.799356) (xy 61.255354 103.894646) (xy 61.350644 103.972848) (xy 61.459359 104.030958) (xy 61.577322 104.066741)
(xy 61.699999 104.078824) (xy 62.350001 104.078824) (xy 62.472678 104.066741) (xy 62.590641 104.030958) (xy 62.699356 103.972848)
(xy 62.794646 103.894646) (xy 62.872848 103.799356) (xy 62.930958 103.690641) (xy 62.966741 103.572678) (xy 62.966852 103.571555)
(xy 62.977941 103.565628) (xy 63.081027 103.481027) (xy 63.102226 103.455196) (xy 63.9552 102.602222) (xy 63.981026 102.581027)
(xy 64.006491 102.549999) (xy 64.065628 102.477941) (xy 64.074883 102.460626) (xy 64.128492 102.36033) (xy 64.167204 102.232715)
(xy 64.177 102.133252) (xy 64.177 102.133243) (xy 64.180274 102.100001) (xy 64.177 102.066759) (xy 64.177 99.803252)
(xy 64.180275 99.77) (xy 64.167204 99.637285) (xy 64.128492 99.50967) (xy 64.065628 99.392059) (xy 64.002224 99.314801)
(xy 64.002222 99.314799) (xy 63.981027 99.288973) (xy 63.955201 99.267778) (xy 62.032226 97.344804) (xy 62.011027 97.318973)
(xy 61.907941 97.234372) (xy 61.79033 97.171508) (xy 61.662715 97.132796) (xy 61.563252 97.123) (xy 61.563245 97.123)
(xy 61.53 97.119726) (xy 61.496755 97.123) (xy 60.457 97.123) (xy 60.457 96.086749) (xy 60.447204 95.987286)
(xy 60.408492 95.85967) (xy 60.345628 95.742059) (xy 60.261027 95.638973) (xy 60.157941 95.554372) (xy 60.10299 95.525)
(xy 62.861928 95.525) (xy 62.874188 95.649482) (xy 62.910498 95.76918) (xy 62.969463 95.879494) (xy 63.048815 95.976185)
(xy 63.145506 96.055537) (xy 63.25582 96.114502) (xy 63.375518 96.150812) (xy 63.5 96.163072) (xy 63.96425 96.16)
(xy 64.123 96.00125) (xy 64.123 95.127) (xy 64.377 95.127) (xy 64.377 96.00125) (xy 64.53575 96.16)
(xy 65 96.163072) (xy 65.124482 96.150812) (xy 65.24418 96.114502) (xy 65.354494 96.055537) (xy 65.451185 95.976185)
(xy 65.530537 95.879494) (xy 65.589502 95.76918) (xy 65.625812 95.649482) (xy 65.638072 95.525) (xy 65.635 95.28575)
(xy 65.47625 95.127) (xy 64.377 95.127) (xy 64.123 95.127) (xy 63.02375 95.127) (xy 62.865 95.28575)
(xy 62.861928 95.525) (xy 60.10299 95.525) (xy 60.04033 95.491508) (xy 59.912715 95.452796) (xy 59.78 95.439725)
(xy 59.647286 95.452796) (xy 59.519671 95.491508) (xy 59.40206 95.554372) (xy 59.298974 95.638973) (xy 59.214372 95.742059)
(xy 59.151508 95.85967) (xy 59.112796 95.987285) (xy 59.103 96.086748) (xy 59.103 96.506804) (xy 59.103001 96.506814)
(xy 59.103 97.177078) (xy 58.997776 97.282302) (xy 58.990803 97.290799) (xy 58.982821 97.29735) (xy 58.956473 97.318973)
(xy 58.935278 97.344799) (xy 58.2573 98.022778) (xy 58.231473 98.043974) (xy 58.210278 98.0698) (xy 58.210276 98.069802)
(xy 58.168455 98.120761) (xy 58.146872 98.14706) (xy 58.084008 98.264671) (xy 58.064314 98.329593) (xy 57.996885 98.411756)
(xy 57.941664 98.515068) (xy 57.907658 98.627169) (xy 57.896176 98.74375) (xy 57.896176 99.25625) (xy 57.907658 99.372831)
(xy 57.941664 99.484932) (xy 57.996885 99.588244) (xy 58.071201 99.678799) (xy 58.161756 99.753115) (xy 58.265068 99.808336)
(xy 58.377169 99.842342) (xy 58.49375 99.853824) (xy 58.93125 99.853824) (xy 59.047831 99.842342) (xy 59.159932 99.808336)
(xy 59.263244 99.753115) (xy 59.273943 99.744334) (xy 59.319463 99.829494) (xy 59.398815 99.926185) (xy 59.495506 100.005537)
(xy 59.60582 100.064502) (xy 59.725518 100.100812) (xy 59.85 100.113072) (xy 60.00175 100.11) (xy 60.1605 99.95125)
(xy 60.1605 99.127) (xy 60.1405 99.127) (xy 60.1405 98.873) (xy 60.1605 98.873) (xy 60.1605 98.853)
(xy 60.4145 98.853) (xy 60.4145 98.873) (xy 61.20125 98.873) (xy 61.36 98.71425) (xy 61.362026 98.589448)
(xy 62.823001 100.050424) (xy 62.823001 100.308837) (xy 62.814502 100.28082) (xy 62.755537 100.170506) (xy 62.676185 100.073815)
(xy 62.579494 99.994463) (xy 62.46918 99.935498) (xy 62.349482 99.899188) (xy 62.225 99.886928) (xy 62.07325 99.89)
(xy 61.9145 100.04875) (xy 61.9145 100.873) (xy 61.9345 100.873) (xy 61.9345 101.127) (xy 61.9145 101.127)
(xy 61.9145 101.147) (xy 61.6605 101.147) (xy 61.6605 101.127) (xy 61.6405 101.127) (xy 61.6405 100.873)
(xy 61.6605 100.873) (xy 61.6605 100.04875) (xy 61.50175 99.89) (xy 61.35 99.886928) (xy 61.225518 99.899188)
(xy 61.189332 99.910165) (xy 61.255537 99.829494) (xy 61.314502 99.71918) (xy 61.350812 99.599482) (xy 61.363072 99.475)
(xy 61.36 99.28575) (xy 61.20125 99.127) (xy 60.4145 99.127) (xy 60.4145 99.95125) (xy 60.57325 100.11)
(xy 60.725 100.113072) (xy 60.849482 100.100812) (xy 60.885668 100.089835) (xy 60.819463 100.170506) (xy 60.773943 100.255666)
(xy 60.763244 100.246885) (xy 60.659932 100.191664) (xy 60.547831 100.157658) (xy 60.43125 100.146176) (xy 59.99375 100.146176)
(xy 59.877169 100.157658) (xy 59.765068 100.191664) (xy 59.661756 100.246885) (xy 59.571201 100.321201) (xy 59.496885 100.411756)
(xy 59.441664 100.515068) (xy 59.407658 100.627169) (xy 59.396176 100.74375) (xy 59.396176 101.25625) (xy 59.407658 101.372831)
(xy 59.441664 101.484932) (xy 59.448001 101.496787) (xy 59.448001 101.95732) (xy 59.409359 101.969042) (xy 59.300644 102.027152)
(xy 59.205354 102.105354) (xy 59.127152 102.200644) (xy 59.069042 102.309359) (xy 59.033259 102.427322) (xy 59.02876 102.473)
(xy 58.215881 102.473) (xy 58.19 102.470451) (xy 58.164119 102.473) (xy 58.08669 102.480626) (xy 57.98735 102.510761)
(xy 57.895798 102.559696) (xy 57.876904 102.575201) (xy 57.817111 102.587095) (xy 57.703004 102.63436) (xy 57.600311 102.702977)
(xy 57.527 102.776288) (xy 57.527 102.775881) (xy 57.529549 102.75) (xy 57.519374 102.64669) (xy 57.511902 102.622059)
(xy 57.489239 102.54735) (xy 57.440304 102.455798) (xy 57.374448 102.375552) (xy 57.354344 102.359053) (xy 56.315955 101.320666)
(xy 56.299448 101.300552) (xy 56.219202 101.234696) (xy 56.12765 101.185761) (xy 56.02831 101.155626) (xy 55.950881 101.148)
(xy 55.925 101.145451) (xy 55.899119 101.148) (xy 55.028824 101.148) (xy 55.028824 100.95) (xy 55.020104 100.861463)
(xy 54.994279 100.776329) (xy 54.952341 100.697869) (xy 54.895902 100.629098) (xy 54.827131 100.572659) (xy 54.748671 100.530721)
(xy 54.663537 100.504896) (xy 54.575 100.496176) (xy 54.425 100.496176) (xy 54.336463 100.504896) (xy 54.251329 100.530721)
(xy 54.25 100.531431) (xy 54.248671 100.530721) (xy 54.163537 100.504896) (xy 54.075 100.496176) (xy 53.925 100.496176)
(xy 53.836463 100.504896) (xy 53.751329 100.530721) (xy 53.75 100.531431) (xy 53.748671 100.530721) (xy 53.663537 100.504896)
(xy 53.575 100.496176) (xy 53.425 100.496176) (xy 53.379345 100.500673) (xy 53.399689 100.487079) (xy 53.487023 100.399745)
(xy 53.55564 100.297052) (xy 53.602905 100.182945) (xy 53.627 100.06181) (xy 53.627 99.938302) (xy 53.602905 99.817167)
(xy 53.55564 99.70306) (xy 53.487023 99.600367) (xy 53.399689 99.513033) (xy 53.296996 99.444416) (xy 53.182889 99.397151)
(xy 53.061754 99.373056) (xy 52.938246 99.373056) (xy 52.817111 99.397151) (xy 52.703004 99.444416) (xy 52.600311 99.513033)
(xy 52.512977 99.600367) (xy 52.44436 99.70306) (xy 52.397095 99.817167) (xy 52.387038 99.867728) (xy 52.145661 100.109106)
(xy 52.125553 100.125608) (xy 52.074883 100.18735) (xy 52.059696 100.205855) (xy 52.041446 100.24) (xy 52.005273 100.24)
(xy 51.99362 100.19827) (xy 51.990954 100.193005) (xy 51.989239 100.18735) (xy 51.967519 100.146714) (xy 51.946731 100.105653)
(xy 51.943089 100.101009) (xy 51.940304 100.095798) (xy 51.911071 100.060177) (xy 51.898721 100.044428) (xy 51.894671 100.040194)
(xy 51.874448 100.015552) (xy 51.858878 100.002774) (xy 50.134673 98.200196) (xy 50.130946 98.195655) (xy 50.116759 98.181468)
(xy 50.102942 98.167023) (xy 50.098501 98.16321) (xy 49.767 97.83171) (xy 49.767 96.004422) (xy 50.487774 96.725196)
(xy 50.508973 96.751027) (xy 50.612059 96.835628) (xy 50.72967 96.898492) (xy 50.857285 96.937204) (xy 50.956748 96.947)
(xy 50.956757 96.947) (xy 50.989999 96.950274) (xy 51.023241 96.947) (xy 51.239578 96.947) (xy 52.372775 98.080197)
(xy 52.393973 98.106027) (xy 52.419802 98.127224) (xy 53.247778 98.955201) (xy 53.268973 98.981027) (xy 53.294799 99.002222)
(xy 53.294801 99.002224) (xy 53.372059 99.065628) (xy 53.48967 99.128492) (xy 53.617285 99.167204) (xy 53.75 99.180275)
(xy 53.783252 99.177) (xy 54.425585 99.177) (xy 54.597359 99.352279) (xy 54.615552 99.374448) (xy 54.653655 99.405718)
(xy 54.691365 99.437309) (xy 54.69372 99.438598) (xy 54.695798 99.440304) (xy 54.739262 99.463536) (xy 54.782419 99.487167)
(xy 54.78498 99.487972) (xy 54.78735 99.489239) (xy 54.834525 99.50355) (xy 54.881449 99.518303) (xy 54.884115 99.518593)
(xy 54.88669 99.519374) (xy 54.923506 99.523) (xy 54.89875 99.523) (xy 54.74 99.68175) (xy 54.75102 99.783358)
(xy 54.789026 99.902528) (xy 54.849551 100.011994) (xy 54.930269 100.107548) (xy 55.006297 100.168156) (xy 55.030721 100.248671)
(xy 55.072659 100.327131) (xy 55.129098 100.395902) (xy 55.197869 100.452341) (xy 55.276329 100.494279) (xy 55.361463 100.520104)
(xy 55.45 100.528824) (xy 56.9 100.528824) (xy 56.988537 100.520104) (xy 57.073671 100.494279) (xy 57.152131 100.452341)
(xy 57.220902 100.395902) (xy 57.277341 100.327131) (xy 57.319279 100.248671) (xy 57.343703 100.168156) (xy 57.419731 100.107548)
(xy 57.500449 100.011994) (xy 57.560974 99.902528) (xy 57.59898 99.783358) (xy 57.61 99.68175) (xy 57.45125 99.523)
(xy 57.105998 99.523) (xy 57.073671 99.505721) (xy 57.054811 99.5) (xy 57.073671 99.494279) (xy 57.105998 99.477)
(xy 57.45125 99.477) (xy 57.61 99.31825) (xy 57.59898 99.216642) (xy 57.560974 99.097472) (xy 57.500449 98.988006)
(xy 57.419731 98.892452) (xy 57.343703 98.831844) (xy 57.319279 98.751329) (xy 57.318569 98.75) (xy 57.319279 98.748671)
(xy 57.345104 98.663537) (xy 57.353824 98.575) (xy 57.353824 98.425) (xy 57.345104 98.336463) (xy 57.319279 98.251329)
(xy 57.318569 98.25) (xy 57.319279 98.248671) (xy 57.345104 98.163537) (xy 57.353824 98.075) (xy 57.353824 97.925)
(xy 57.345104 97.836463) (xy 57.319279 97.751329) (xy 57.318569 97.75) (xy 57.319279 97.748671) (xy 57.345104 97.663537)
(xy 57.353824 97.575) (xy 57.353824 97.425) (xy 57.345104 97.336463) (xy 57.319279 97.251329) (xy 57.318569 97.25)
(xy 57.319279 97.248671) (xy 57.345104 97.163537) (xy 57.353824 97.075) (xy 57.353824 96.925) (xy 57.345104 96.836463)
(xy 57.319279 96.751329) (xy 57.318569 96.75) (xy 57.319279 96.748671) (xy 57.345104 96.663537) (xy 57.353824 96.575)
(xy 57.353824 96.425) (xy 57.345104 96.336463) (xy 57.319279 96.251329) (xy 57.318569 96.25) (xy 57.319279 96.248671)
(xy 57.345104 96.163537) (xy 57.353824 96.075) (xy 57.353824 96.027) (xy 58.507743 96.027) (xy 58.533624 96.029549)
(xy 58.559505 96.027) (xy 58.636934 96.019374) (xy 58.736274 95.989239) (xy 58.827826 95.940304) (xy 58.908072 95.874448)
(xy 58.924579 95.854334) (xy 59.531937 95.246978) (xy 60.634141 95.246978) (xy 60.660022 95.249527) (xy 60.685903 95.246978)
(xy 60.763332 95.239352) (xy 60.862672 95.209217) (xy 60.954224 95.160282) (xy 61.03447 95.094426) (xy 61.050977 95.074312)
(xy 61.172327 94.952962) (xy 61.222889 94.942905) (xy 61.336996 94.89564) (xy 61.439689 94.827023) (xy 61.527023 94.739689)
(xy 61.59564 94.636996) (xy 61.642905 94.522889) (xy 61.65243 94.475) (xy 62.861928 94.475) (xy 62.865 94.71425)
(xy 63.02375 94.873) (xy 64.123 94.873) (xy 64.123 94.853) (xy 64.377 94.853) (xy 64.377 94.873)
(xy 65.47625 94.873) (xy 65.635 94.71425) (xy 65.638072 94.475) (xy 65.625812 94.350518) (xy 65.589502 94.23082)
(xy 65.530537 94.120506) (xy 65.451185 94.023815) (xy 65.354494 93.944463) (xy 65.352804 93.94356) (xy 65.363948 93.906823)
(xy 65.381364 93.73) (xy 65.363948 93.553177) (xy 65.312371 93.38315) (xy 65.228614 93.226451) (xy 65.120735 93.095)
(xy 65.228614 92.963549) (xy 65.312371 92.80685) (xy 65.363948 92.636823) (xy 65.381364 92.46) (xy 65.363948 92.283177)
(xy 65.312371 92.11315) (xy 65.228614 91.956451) (xy 65.115896 91.819104) (xy 65.062156 91.775) (xy 66.886928 91.775)
(xy 66.89 91.92675) (xy 67.04875 92.0855) (xy 67.873 92.0855) (xy 67.873 91.29875) (xy 68.127 91.29875)
(xy 68.127 92.0855) (xy 68.95125 92.0855) (xy 69.11 91.92675) (xy 69.113072 91.775) (xy 69.100812 91.650518)
(xy 69.064502 91.53082) (xy 69.005537 91.420506) (xy 68.926185 91.323815) (xy 68.829494 91.244463) (xy 68.71918 91.185498)
(xy 68.599482 91.149188) (xy 68.475 91.136928) (xy 68.28575 91.14) (xy 68.127 91.29875) (xy 67.873 91.29875)
(xy 67.71425 91.14) (xy 67.525 91.136928) (xy 67.400518 91.149188) (xy 67.28082 91.185498) (xy 67.170506 91.244463)
(xy 67.073815 91.323815) (xy 66.994463 91.420506) (xy 66.935498 91.53082) (xy 66.899188 91.650518) (xy 66.886928 91.775)
(xy 65.062156 91.775) (xy 64.978549 91.706386) (xy 64.82185 91.622629) (xy 64.651823 91.571052) (xy 64.519307 91.558)
(xy 63.980693 91.558) (xy 63.848177 91.571052) (xy 63.67815 91.622629) (xy 63.521451 91.706386) (xy 63.384104 91.819104)
(xy 63.271386 91.956451) (xy 63.187629 92.11315) (xy 63.136052 92.283177) (xy 63.118636 92.46) (xy 63.136052 92.636823)
(xy 63.187629 92.80685) (xy 63.271386 92.963549) (xy 63.379265 93.095) (xy 63.271386 93.226451) (xy 63.187629 93.38315)
(xy 63.136052 93.553177) (xy 63.118636 93.73) (xy 63.136052 93.906823) (xy 63.147196 93.94356) (xy 63.145506 93.944463)
(xy 63.048815 94.023815) (xy 62.969463 94.120506) (xy 62.910498 94.23082) (xy 62.874188 94.350518) (xy 62.861928 94.475)
(xy 61.65243 94.475) (xy 61.667 94.401754) (xy 61.667 94.278246) (xy 61.642905 94.157111) (xy 61.59564 94.043004)
(xy 61.527023 93.940311) (xy 61.439689 93.852977) (xy 61.336996 93.78436) (xy 61.222889 93.737095) (xy 61.101754 93.713)
(xy 60.978246 93.713) (xy 60.857111 93.737095) (xy 60.743004 93.78436) (xy 60.640311 93.852977) (xy 60.552977 93.940311)
(xy 60.48436 94.043004) (xy 60.437095 94.157111) (xy 60.429961 94.192978) (xy 59.632311 94.192978) (xy 61.914339 91.910951)
(xy 61.934448 91.894448) (xy 62.000304 91.814202) (xy 62.049239 91.72265) (xy 62.079374 91.62331) (xy 62.081005 91.606754)
(xy 62.089549 91.520001) (xy 62.087 91.49412) (xy 62.087 87.445789) (xy 62.146176 87.386613)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
)
)
(filled_polygon
(pts
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 46.251329 102.819279) (xy 46.331844 102.843703) (xy 46.392452 102.919731) (xy 46.488006 103.000449) (xy 46.597472 103.060974)
(xy 46.716642 103.09898) (xy 46.748333 103.102417) (xy 46.627 103.22375) (xy 46.627 104.173) (xy 46.647 104.173)
(xy 46.647 104.427) (xy 46.627 104.427) (xy 46.627 105.37625) (xy 46.78575 105.535) (xy 47.4 105.538072)
(xy 47.473001 105.530882) (xy 47.473001 105.728366) (xy 47.4 105.721176) (xy 45.6 105.721176) (xy 45.526095 105.728455)
(xy 45.45503 105.750012) (xy 45.435408 105.7605) (xy 45.265806 105.7605) (xy 45.253115 105.736756) (xy 45.244334 105.726057)
(xy 45.329494 105.680537) (xy 45.426185 105.601185) (xy 45.487105 105.526953) (xy 45.6 105.538072) (xy 46.21425 105.535)
(xy 46.373 105.37625) (xy 46.373 104.427) (xy 46.353 104.427) (xy 46.353 104.173) (xy 46.373 104.173)
(xy 46.373 103.22375) (xy 46.21425 103.065) (xy 45.6 103.061928) (xy 45.519716 103.069835) (xy 45.527 102.995881)
(xy 45.527 102.995879) (xy 45.529549 102.970001) (xy 45.527 102.944123) (xy 45.527 102.853824) (xy 45.575 102.853824)
(xy 45.663537 102.845104) (xy 45.748671 102.819279) (xy 45.75 102.818569) (xy 45.751329 102.819279) (xy 45.836463 102.845104)
(xy 45.925 102.853824) (xy 46.075 102.853824) (xy 46.163537 102.845104) (xy 46.248671 102.819279) (xy 46.25 102.818569)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
)
)
Schematic beautify and layout improvments, Length matching for SDIO
2019-12-25 19:15:32 +01:00
(filled_polygon
(pts
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 52.005721 102.573671) (xy 52.023 102.605998) (xy 52.023 102.95125) (xy 52.18175 103.11) (xy 52.283358 103.09898)
(xy 52.402528 103.060974) (xy 52.473001 103.022009) (xy 52.473001 103.16411) (xy 52.470451 103.19) (xy 52.480626 103.293309)
(xy 52.510761 103.392649) (xy 52.559696 103.484201) (xy 52.564075 103.489537) (xy 52.625553 103.564448) (xy 52.645662 103.580951)
(xy 53.030996 103.966286) (xy 52.984932 103.941664) (xy 52.872831 103.907658) (xy 52.75625 103.896176) (xy 52.24375 103.896176)
(xy 52.127169 103.907658) (xy 52.015068 103.941664) (xy 51.911756 103.996885) (xy 51.821201 104.071201) (xy 51.778824 104.122838)
(xy 51.778824 103.7) (xy 51.771545 103.626095) (xy 51.749988 103.55503) (xy 51.714981 103.489537) (xy 51.667869 103.432131)
(xy 51.610463 103.385019) (xy 51.54497 103.350012) (xy 51.473905 103.328455) (xy 51.4 103.321176) (xy 49.6 103.321176)
(xy 49.526095 103.328455) (xy 49.45503 103.350012) (xy 49.389537 103.385019) (xy 49.332131 103.432131) (xy 49.285019 103.489537)
(xy 49.250012 103.55503) (xy 49.228455 103.626095) (xy 49.225546 103.655634) (xy 49.182327 103.647038) (xy 49.027 103.491711)
(xy 49.027 102.853824) (xy 49.075 102.853824) (xy 49.163537 102.845104) (xy 49.248671 102.819279) (xy 49.25 102.818569)
(xy 49.251329 102.819279) (xy 49.336463 102.845104) (xy 49.425 102.853824) (xy 49.575 102.853824) (xy 49.663537 102.845104)
(xy 49.748671 102.819279) (xy 49.75 102.818569) (xy 49.751329 102.819279) (xy 49.836463 102.845104) (xy 49.925 102.853824)
(xy 50.075 102.853824) (xy 50.163537 102.845104) (xy 50.248671 102.819279) (xy 50.25 102.818569) (xy 50.251329 102.819279)
(xy 50.336463 102.845104) (xy 50.425 102.853824) (xy 50.575 102.853824) (xy 50.663537 102.845104) (xy 50.748671 102.819279)
(xy 50.75 102.818569) (xy 50.751329 102.819279) (xy 50.836463 102.845104) (xy 50.925 102.853824) (xy 51.075 102.853824)
(xy 51.163537 102.845104) (xy 51.248671 102.819279) (xy 51.25 102.818569) (xy 51.251329 102.819279) (xy 51.331844 102.843703)
(xy 51.392452 102.919731) (xy 51.488006 103.000449) (xy 51.597472 103.060974) (xy 51.716642 103.09898) (xy 51.81825 103.11)
(xy 51.977 102.95125) (xy 51.977 102.605998) (xy 51.994279 102.573671) (xy 52 102.554811)
Schematic beautify and layout improvments, Length matching for SDIO
2019-12-25 19:15:32 +01:00
)
)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
(filled_polygon
(pts
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(xy 75.377 103.3355) (xy 75.397 103.3355) (xy 75.397 103.5895) (xy 75.377 103.5895) (xy 75.377 103.6095)
(xy 75.123 103.6095) (xy 75.123 103.5895) (xy 75.103 103.5895) (xy 75.103 103.3355) (xy 75.123 103.3355)
(xy 75.123 103.3155) (xy 75.377 103.3155)
)
)
(filled_polygon
(pts
(xy 80.13569 97.671921) (xy 80.185838 97.837236) (xy 80.267273 97.989591) (xy 80.323 98.057496) (xy 80.323001 99.482076)
(xy 76.36 103.445078) (xy 76.36 103.335498) (xy 76.201252 103.335498) (xy 76.36 103.17675) (xy 76.363072 103.025)
(xy 76.350812 102.900518) (xy 76.314502 102.78082) (xy 76.255537 102.670506) (xy 76.176185 102.573815) (xy 76.079494 102.494463)
Move vias to better locations: These vias have proven unfortunately placed for hand soldering
2020-02-05 22:12:31 +01:00
(xy 75.96918 102.435498) (xy 75.849482 102.399188) (xy 75.725 102.386928) (xy 75.53575 102.39) (xy 75.377002 102.548748)
(xy 75.377002 102.39) (xy 75.355498 102.39) (xy 75.374448 102.374448) (xy 75.440304 102.294202) (xy 75.489239 102.20265)
(xy 75.519374 102.10331) (xy 75.527 102.025881) (xy 75.527 102.02588) (xy 75.529549 102) (xy 75.527 101.974119)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(xy 75.527 101.013381) (xy 75.529549 100.9875) (xy 75.519374 100.88419) (xy 75.501012 100.823659) (xy 75.489239 100.78485)
(xy 75.440304 100.693298) (xy 75.374448 100.613052) (xy 75.354344 100.596553) (xy 74.615955 99.858166) (xy 74.599448 99.838052)
(xy 74.574187 99.817321) (xy 74.558336 99.765068) (xy 74.503115 99.661756) (xy 74.428799 99.571201) (xy 74.338244 99.496885)
(xy 74.327 99.490875) (xy 74.327 99.353824) (xy 74.50625 99.353824) (xy 74.622831 99.342342) (xy 74.734932 99.308336)
(xy 74.838244 99.253115) (xy 74.928799 99.178799) (xy 75.003115 99.088244) (xy 75.009125 99.077) (xy 75.153144 99.077)
(xy 75.157658 99.122831) (xy 75.191664 99.234932) (xy 75.246885 99.338244) (xy 75.321201 99.428799) (xy 75.411756 99.503115)
(xy 75.515068 99.558336) (xy 75.627169 99.592342) (xy 75.74375 99.603824) (xy 76.18125 99.603824) (xy 76.297831 99.592342)
(xy 76.409932 99.558336) (xy 76.513244 99.503115) (xy 76.523943 99.494334) (xy 76.569463 99.579494) (xy 76.648815 99.676185)
(xy 76.745506 99.755537) (xy 76.85582 99.814502) (xy 76.975518 99.850812) (xy 77.1 99.863072) (xy 77.25175 99.86)
(xy 77.4105 99.70125) (xy 77.4105 98.877) (xy 77.6645 98.877) (xy 77.6645 99.70125) (xy 77.82325 99.86)
(xy 77.975 99.863072) (xy 78.099482 99.850812) (xy 78.21918 99.814502) (xy 78.329494 99.755537) (xy 78.426185 99.676185)
(xy 78.505537 99.579494) (xy 78.564502 99.46918) (xy 78.600812 99.349482) (xy 78.613072 99.225) (xy 78.61 99.03575)
(xy 78.45125 98.877) (xy 77.6645 98.877) (xy 77.4105 98.877) (xy 77.3905 98.877) (xy 77.3905 98.623)
(xy 77.4105 98.623) (xy 77.4105 98.603) (xy 77.6645 98.603) (xy 77.6645 98.623) (xy 78.45125 98.623)
(xy 78.61 98.46425) (xy 78.613072 98.275) (xy 78.600812 98.150518) (xy 78.564502 98.03082) (xy 78.505537 97.920506)
(xy 78.447037 97.849223) (xy 78.49375 97.853824) (xy 79.00625 97.853824) (xy 79.122831 97.842342) (xy 79.234932 97.808336)
(xy 79.338244 97.753115) (xy 79.428799 97.678799) (xy 79.503115 97.588244) (xy 79.515806 97.5645) (xy 80.12511 97.5645)
Improve layout, change color of B.Silk and improve schematic
2020-01-12 14:56:58 +01:00
)
)
(filled_polygon
(pts
(xy 46.10669 99.059374) (xy 46.184119 99.067) (xy 46.184121 99.067) (xy 46.209999 99.069549) (xy 46.235877 99.067)
(xy 46.973001 99.067) (xy 46.973 100.24) (xy 46.872998 100.24) (xy 46.872998 100.294748) (xy 46.81825 100.24)
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 46.716642 100.25102) (xy 46.597472 100.289026) (xy 46.488006 100.349551) (xy 46.392452 100.430269) (xy 46.331844 100.506297)
(xy 46.251329 100.530721) (xy 46.25 100.531431) (xy 46.248671 100.530721) (xy 46.163537 100.504896) (xy 46.075 100.496176)
(xy 45.925 100.496176) (xy 45.836463 100.504896) (xy 45.751329 100.530721) (xy 45.75 100.531431) (xy 45.748671 100.530721)
(xy 45.663537 100.504896) (xy 45.575 100.496176) (xy 45.527 100.496176) (xy 45.527 100.144101) (xy 45.539374 100.10331)
Improve layout, change color of B.Silk and improve schematic
2020-01-12 14:56:58 +01:00
(xy 45.549004 100.005537) (xy 45.549549 100.000001) (xy 45.547 99.974123) (xy 45.547 99.588289) (xy 46.083079 99.052212)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
)
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(filled_polygon
(pts
Move vias to better locations: These vias have proven unfortunately placed for hand soldering
2020-02-05 22:12:31 +01:00
(xy 66.271176 87.35) (xy 66.278455 87.423905) (xy 66.300012 87.49497) (xy 66.335019 87.560463) (xy 66.382131 87.617869)
(xy 66.439537 87.664981) (xy 66.50503 87.699988) (xy 66.576095 87.721545) (xy 66.65 87.728824) (xy 68.35 87.728824)
(xy 68.423905 87.721545) (xy 68.49497 87.699988) (xy 68.560463 87.664981) (xy 68.617869 87.617869) (xy 68.664981 87.560463)
(xy 68.699988 87.49497) (xy 68.721545 87.423905) (xy 68.728824 87.35) (xy 68.728824 85.934113) (xy 68.882605 86.087894)
(xy 68.860153 86.142097) (xy 68.813 86.379151) (xy 68.813 86.620849) (xy 68.860153 86.857903) (xy 68.952647 87.081202)
(xy 69.086927 87.282167) (xy 69.257833 87.453073) (xy 69.458798 87.587353) (xy 69.682097 87.679847) (xy 69.919151 87.727)
(xy 70.160849 87.727) (xy 70.397903 87.679847) (xy 70.600598 87.595887) (xy 73.109049 90.104339) (xy 73.125552 90.124448)
(xy 73.194035 90.18065) (xy 73.205798 90.190304) (xy 73.29735 90.239239) (xy 73.39669 90.269374) (xy 73.499999 90.279549)
(xy 73.52588 90.277) (xy 76.781711 90.277) (xy 77.973001 91.468291) (xy 77.973001 92.43754) (xy 77.96918 92.435498)
(xy 77.849482 92.399188) (xy 77.725 92.386928) (xy 77.57325 92.39) (xy 77.4145 92.54875) (xy 77.4145 93.373)
(xy 77.4345 93.373) (xy 77.4345 93.627) (xy 77.4145 93.627) (xy 77.4145 93.647) (xy 77.1605 93.647)
(xy 77.1605 93.627) (xy 77.1405 93.627) (xy 77.1405 93.373) (xy 77.1605 93.373) (xy 77.1605 92.54875)
(xy 77.00175 92.39) (xy 76.85 92.386928) (xy 76.725518 92.399188) (xy 76.60582 92.435498) (xy 76.495506 92.494463)
(xy 76.398815 92.573815) (xy 76.319463 92.670506) (xy 76.273943 92.755666) (xy 76.263244 92.746885) (xy 76.159932 92.691664)
(xy 76.047831 92.657658) (xy 75.93125 92.646176) (xy 75.49375 92.646176) (xy 75.377169 92.657658) (xy 75.265068 92.691664)
(xy 75.161756 92.746885) (xy 75.071201 92.821201) (xy 74.996885 92.911756) (xy 74.941664 93.015068) (xy 74.907658 93.127169)
(xy 74.896176 93.24375) (xy 74.896176 93.75625) (xy 74.907658 93.872831) (xy 74.941664 93.984932) (xy 74.996885 94.088244)
(xy 75.071201 94.178799) (xy 75.161756 94.253115) (xy 75.2105 94.279169) (xy 75.210501 94.798) (xy 74.900528 94.798)
(xy 74.838244 94.746885) (xy 74.734932 94.691664) (xy 74.622831 94.657658) (xy 74.50625 94.646176) (xy 73.99375 94.646176)
(xy 73.877169 94.657658) (xy 73.765068 94.691664) (xy 73.661756 94.746885) (xy 73.571201 94.821201) (xy 73.5 94.90796)
(xy 73.428799 94.821201) (xy 73.338244 94.746885) (xy 73.234932 94.691664) (xy 73.122831 94.657658) (xy 73.00625 94.646176)
(xy 72.49375 94.646176) (xy 72.377169 94.657658) (xy 72.265068 94.691664) (xy 72.161756 94.746885) (xy 72.071201 94.821201)
(xy 71.996885 94.911756) (xy 71.941664 95.015068) (xy 71.907658 95.127169) (xy 71.896176 95.24375) (xy 71.896176 95.68125)
(xy 71.907658 95.797831) (xy 71.941664 95.909932) (xy 71.996885 96.013244) (xy 72.071201 96.103799) (xy 72.161756 96.178115)
(xy 72.265068 96.233336) (xy 72.320001 96.25) (xy 72.265068 96.266664) (xy 72.161756 96.321885) (xy 72.071201 96.396201)
(xy 71.996885 96.486756) (xy 71.941664 96.590068) (xy 71.907658 96.702169) (xy 71.896176 96.81875) (xy 71.896176 97.25625)
(xy 71.907658 97.372831) (xy 71.941664 97.484932) (xy 71.996885 97.588244) (xy 72.071201 97.678799) (xy 72.15796 97.75)
(xy 72.071201 97.821201) (xy 71.996885 97.911756) (xy 71.941664 98.015068) (xy 71.907658 98.127169) (xy 71.896176 98.24375)
(xy 71.896176 98.75625) (xy 71.907658 98.872831) (xy 71.941664 98.984932) (xy 71.996885 99.088244) (xy 72.071201 99.178799)
(xy 72.161756 99.253115) (xy 72.265068 99.308336) (xy 72.377169 99.342342) (xy 72.49375 99.353824) (xy 72.93125 99.353824)
(xy 73.047831 99.342342) (xy 73.159932 99.308336) (xy 73.173001 99.301351) (xy 73.173001 99.490875) (xy 73.161756 99.496885)
(xy 73.071201 99.571201) (xy 73 99.65796) (xy 72.928799 99.571201) (xy 72.838244 99.496885) (xy 72.734932 99.441664)
(xy 72.622831 99.407658) (xy 72.50625 99.396176) (xy 72.249678 99.396176) (xy 71.815341 98.96184) (xy 71.842342 98.872831)
(xy 71.853824 98.75625) (xy 71.853824 98.31875) (xy 71.842342 98.202169) (xy 71.808336 98.090068) (xy 71.753115 97.986756)
(xy 71.678799 97.896201) (xy 71.588244 97.821885) (xy 71.484932 97.766664) (xy 71.429999 97.75) (xy 71.484932 97.733336)
(xy 71.588244 97.678115) (xy 71.678799 97.603799) (xy 71.753115 97.513244) (xy 71.808336 97.409932) (xy 71.842342 97.297831)
(xy 71.853824 97.18125) (xy 71.853824 96.74375) (xy 71.842342 96.627169) (xy 71.808336 96.515068) (xy 71.753115 96.411756)
(xy 71.678799 96.321201) (xy 71.588244 96.246885) (xy 71.484932 96.191664) (xy 71.372831 96.157658) (xy 71.25625 96.146176)
(xy 70.74375 96.146176) (xy 70.627169 96.157658) (xy 70.515068 96.191664) (xy 70.411756 96.246885) (xy 70.321201 96.321201)
(xy 70.25 96.40796) (xy 70.178799 96.321201) (xy 70.09204 96.25) (xy 70.178799 96.178799) (xy 70.253115 96.088244)
(xy 70.308336 95.984932) (xy 70.342342 95.872831) (xy 70.353824 95.75625) (xy 70.353824 95.24375) (xy 70.351356 95.218692)
(xy 70.352 95.212153) (xy 70.352 95.212143) (xy 70.354427 95.1875) (xy 70.352 95.162857) (xy 70.352 94.25128)
(xy 70.364981 94.235463) (xy 70.399988 94.16997) (xy 70.421545 94.098905) (xy 70.428824 94.025) (xy 70.428824 93.375)
(xy 70.421545 93.301095) (xy 70.399988 93.23003) (xy 70.364981 93.164537) (xy 70.317869 93.107131) (xy 70.260463 93.060019)
(xy 70.19497 93.025012) (xy 70.123905 93.003455) (xy 70.05 92.996176) (xy 69.97626 92.996176) (xy 70.187543 92.784893)
(xy 70.206684 92.769184) (xy 70.218886 92.754316) (xy 70.26825 92.76) (xy 70.427 92.60125) (xy 70.427 92.143519)
(xy 70.428824 92.125) (xy 70.428824 91.653) (xy 70.571176 91.653) (xy 70.571176 92.125) (xy 70.573 92.143519)
(xy 70.573 92.60125) (xy 70.73175 92.76) (xy 70.839902 92.747546) (xy 70.958666 92.70829) (xy 71.06749 92.646619)
(xy 71.162192 92.564903) (xy 71.209843 92.503824) (xy 71.35 92.503824) (xy 71.423905 92.496545) (xy 71.49497 92.474988)
(xy 71.560463 92.439981) (xy 71.617869 92.392869) (xy 71.637558 92.368878) (xy 71.636928 92.4) (xy 71.649188 92.524482)
(xy 71.685498 92.64418) (xy 71.744463 92.754494) (xy 71.823815 92.851185) (xy 71.920506 92.930537) (xy 72.005666 92.976057)
(xy 71.996885 92.986756) (xy 71.941664 93.090068) (xy 71.916506 93.173) (xy 71.669505 93.173) (xy 71.664981 93.164537)
(xy 71.617869 93.107131) (xy 71.560463 93.060019) (xy 71.49497 93.025012) (xy 71.423905 93.003455) (xy 71.35 92.996176)
(xy 70.95 92.996176) (xy 70.876095 93.003455) (xy 70.80503 93.025012) (xy 70.739537 93.060019) (xy 70.682131 93.107131)
(xy 70.635019 93.164537) (xy 70.600012 93.23003) (xy 70.578455 93.301095) (xy 70.571176 93.375) (xy 70.571176 94.025)
(xy 70.578455 94.098905) (xy 70.600012 94.16997) (xy 70.635019 94.235463) (xy 70.682131 94.292869) (xy 70.739537 94.339981)
(xy 70.80503 94.374988) (xy 70.876095 94.396545) (xy 70.95 94.403824) (xy 71.35 94.403824) (xy 71.423905 94.396545)
(xy 71.49497 94.374988) (xy 71.560463 94.339981) (xy 71.617869 94.292869) (xy 71.664981 94.235463) (xy 71.669505 94.227)
(xy 72.129935 94.227) (xy 72.161756 94.253115) (xy 72.265068 94.308336) (xy 72.377169 94.342342) (xy 72.49375 94.353824)
(xy 73.00625 94.353824) (xy 73.122831 94.342342) (xy 73.234932 94.308336) (xy 73.338244 94.253115) (xy 73.428799 94.178799)
(xy 73.503115 94.088244) (xy 73.558336 93.984932) (xy 73.574187 93.932679) (xy 73.599448 93.911948) (xy 73.615955 93.891834)
(xy 75.48079 92.027) (xy 76.660141 92.027) (xy 76.703004 92.05564) (xy 76.817111 92.102905) (xy 76.938246 92.127)
(xy 77.061754 92.127) (xy 77.182889 92.102905) (xy 77.296996 92.05564) (xy 77.399689 91.987023) (xy 77.487023 91.899689)
(xy 77.55564 91.796996) (xy 77.602905 91.682889) (xy 77.627 91.561754) (xy 77.627 91.438246) (xy 77.602905 91.317111)
(xy 77.55564 91.203004) (xy 77.487023 91.100311) (xy 77.399689 91.012977) (xy 77.296996 90.94436) (xy 77.182889 90.897095)
(xy 77.061754 90.873) (xy 76.938246 90.873) (xy 76.817111 90.897095) (xy 76.703004 90.94436) (xy 76.660141 90.973)
(xy 75.28838 90.973) (xy 75.262499 90.970451) (xy 75.232385 90.973417) (xy 75.15919 90.980626) (xy 75.05985 91.010761)
(xy 74.968298 91.059696) (xy 74.888052 91.125552) (xy 74.871549 91.145661) (xy 73.81448 92.20273) (xy 73.70125 92.0895)
(xy 72.877 92.0895) (xy 72.877 92.1095) (xy 72.623 92.1095) (xy 72.623 92.0895) (xy 72.603 92.0895)
(xy 72.603 91.8355) (xy 72.623 91.8355) (xy 72.623 91.04875) (xy 72.877 91.04875) (xy 72.877 91.8355)
(xy 73.70125 91.8355) (xy 73.86 91.67675) (xy 73.863072 91.525) (xy 73.850812 91.400518) (xy 73.814502 91.28082)
(xy 73.755537 91.170506) (xy 73.676185 91.073815) (xy 73.579494 90.994463) (xy 73.46918 90.935498) (xy 73.349482 90.899188)
(xy 73.225 90.886928) (xy 73.03575 90.89) (xy 72.877 91.04875) (xy 72.623 91.04875) (xy 72.46425 90.89)
(xy 72.275 90.886928) (xy 72.150518 90.899188) (xy 72.03082 90.935498) (xy 71.920506 90.994463) (xy 71.823815 91.073815)
(xy 71.744463 91.170506) (xy 71.685498 91.28082) (xy 71.681221 91.29492) (xy 71.664981 91.264537) (xy 71.652081 91.248818)
(xy 71.654427 91.224999) (xy 71.652 91.200356) (xy 71.652 91.200347) (xy 71.644736 91.126591) (xy 71.616031 91.031964)
(xy 71.569417 90.944755) (xy 71.550361 90.921536) (xy 71.522399 90.887464) (xy 71.522397 90.887462) (xy 71.506684 90.868316)
(xy 71.487538 90.852603) (xy 70.705777 90.070842) (xy 70.822167 89.993073) (xy 70.993073 89.822167) (xy 71.127353 89.621202)
(xy 71.219847 89.397903) (xy 71.267 89.160849) (xy 71.267 88.919151) (xy 71.219847 88.682097) (xy 71.127353 88.458798)
(xy 70.993073 88.257833) (xy 70.822167 88.086927) (xy 70.621202 87.952647) (xy 70.397903 87.860153) (xy 70.160849 87.813)
(xy 69.919151 87.813) (xy 69.682097 87.860153) (xy 69.458798 87.952647) (xy 69.257833 88.086927) (xy 69.086927 88.257833)
(xy 68.952647 88.458798) (xy 68.860153 88.682097) (xy 68.813 88.919151) (xy 68.813 89.160849) (xy 68.860153 89.397903)
(xy 68.952647 89.621202) (xy 69.03737 89.748) (xy 68.917935 89.748) (xy 68.64704 89.477105) (xy 68.679847 89.397903)
(xy 68.727 89.160849) (xy 68.727 88.919151) (xy 68.679847 88.682097) (xy 68.587353 88.458798) (xy 68.453073 88.257833)
(xy 68.282167 88.086927) (xy 68.081202 87.952647) (xy 67.857903 87.860153) (xy 67.620849 87.813) (xy 67.379151 87.813)
(xy 67.142097 87.860153) (xy 66.918798 87.952647) (xy 66.717833 88.086927) (xy 66.546927 88.257833) (xy 66.545145 88.2605)
(xy 65.265806 88.2605) (xy 65.253115 88.236756) (xy 65.178799 88.146201) (xy 65.088244 88.071885) (xy 64.984932 88.016664)
(xy 64.929999 88) (xy 64.984932 87.983336) (xy 65.088244 87.928115) (xy 65.178799 87.853799) (xy 65.253115 87.763244)
(xy 65.308336 87.659932) (xy 65.342342 87.547831) (xy 65.353824 87.43125) (xy 65.353824 86.99375) (xy 65.342342 86.877169)
(xy 65.308336 86.765068) (xy 65.281127 86.714163) (xy 66.271176 85.724115)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
)
)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(filled_polygon
(pts
(xy 76.571176 95.625) (xy 76.573 95.643519) (xy 76.573 96.10125) (xy 76.73175 96.26) (xy 76.839902 96.247546)
(xy 76.958666 96.20829) (xy 77.06749 96.146619) (xy 77.162192 96.064903) (xy 77.209843 96.003824) (xy 77.35 96.003824)
(xy 77.423905 95.996545) (xy 77.49497 95.974988) (xy 77.560463 95.939981) (xy 77.617869 95.892869) (xy 77.637558 95.868878)
(xy 77.636928 95.9) (xy 77.649188 96.024482) (xy 77.685498 96.14418) (xy 77.744463 96.254494) (xy 77.823815 96.351185)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(xy 77.920506 96.430537) (xy 78.005666 96.476057) (xy 77.996885 96.486756) (xy 77.941664 96.590068) (xy 77.916506 96.673)
(xy 77.669505 96.673) (xy 77.664981 96.664537) (xy 77.617869 96.607131) (xy 77.560463 96.560019) (xy 77.49497 96.525012)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(xy 77.423905 96.503455) (xy 77.35 96.496176) (xy 76.95 96.496176) (xy 76.876095 96.503455) (xy 76.80503 96.525012)
(xy 76.739537 96.560019) (xy 76.682131 96.607131) (xy 76.635019 96.664537) (xy 76.600012 96.73003) (xy 76.578455 96.801095)
(xy 76.571176 96.875) (xy 76.571176 97.525) (xy 76.578455 97.598905) (xy 76.600012 97.66997) (xy 76.635019 97.735463)
(xy 76.682131 97.792869) (xy 76.684327 97.794671) (xy 76.648815 97.823815) (xy 76.569463 97.920506) (xy 76.523943 98.005666)
(xy 76.513244 97.996885) (xy 76.409932 97.941664) (xy 76.297831 97.907658) (xy 76.18125 97.896176) (xy 76.125121 97.896176)
(xy 76.19497 97.874988) (xy 76.260463 97.839981) (xy 76.317869 97.792869) (xy 76.364981 97.735463) (xy 76.399988 97.66997)
(xy 76.421545 97.598905) (xy 76.428824 97.525) (xy 76.428824 96.875) (xy 76.421545 96.801095) (xy 76.399988 96.73003)
(xy 76.364981 96.664537) (xy 76.317869 96.607131) (xy 76.260463 96.560019) (xy 76.19497 96.525012) (xy 76.123905 96.503455)
(xy 76.05 96.496176) (xy 75.65 96.496176) (xy 75.576095 96.503455) (xy 75.50503 96.525012) (xy 75.485408 96.5355)
(xy 75.029169 96.5355) (xy 75.003115 96.486756) (xy 74.928799 96.396201) (xy 74.838244 96.321885) (xy 74.734932 96.266664)
(xy 74.679999 96.25) (xy 74.734932 96.233336) (xy 74.838244 96.178115) (xy 74.928799 96.103799) (xy 75.003115 96.013244)
(xy 75.058336 95.909932) (xy 75.091077 95.802) (xy 75.317133 95.802) (xy 75.335019 95.835463) (xy 75.382131 95.892869)
(xy 75.439537 95.939981) (xy 75.50503 95.974988) (xy 75.576095 95.996545) (xy 75.65 96.003824) (xy 75.790157 96.003824)
(xy 75.837808 96.064903) (xy 75.93251 96.146619) (xy 76.041334 96.20829) (xy 76.160098 96.247546) (xy 76.26825 96.26)
(xy 76.427 96.10125) (xy 76.427 95.643519) (xy 76.428824 95.625) (xy 76.428824 95.153) (xy 76.571176 95.153)
)
)
Move vias to better locations: These vias have proven unfortunately placed for hand soldering
2020-02-05 22:12:31 +01:00
(filled_polygon
(pts
(xy 39.646176 93.075) (xy 39.654896 93.163537) (xy 39.680721 93.248671) (xy 39.681431 93.25) (xy 39.680721 93.251329)
(xy 39.654896 93.336463) (xy 39.646176 93.425) (xy 39.646176 93.575) (xy 39.654896 93.663537) (xy 39.680721 93.748671)
(xy 39.681431 93.75) (xy 39.680721 93.751329) (xy 39.654896 93.836463) (xy 39.646176 93.925) (xy 39.646176 93.973)
(xy 35.49829 93.973) (xy 35.390955 93.865665) (xy 35.374448 93.845551) (xy 35.294202 93.779695) (xy 35.20265 93.73076)
(xy 35.10331 93.700625) (xy 35.025881 93.692999) (xy 35 93.69045) (xy 34.974119 93.692999) (xy 33.422241 93.692999)
(xy 33.453073 93.662167) (xy 33.587353 93.461202) (xy 33.679847 93.237903) (xy 33.721798 93.027) (xy 39.646176 93.027)
)
)
Moved stuff
2019-12-27 21:36:56 +01:00
(filled_polygon
(pts
(xy 59.9145 86.373) (xy 59.9345 86.373) (xy 59.9345 86.627) (xy 59.9145 86.627) (xy 59.9145 87.45125)
(xy 59.96325 87.5) (xy 59.9145 87.54875) (xy 59.9145 88.373) (xy 59.9345 88.373) (xy 59.9345 88.627)
(xy 59.9145 88.627) (xy 59.9145 89.45125) (xy 60.07325 89.61) (xy 60.225 89.613072) (xy 60.333 89.602435)
(xy 60.333 91.051709) (xy 57.411711 93.973) (xy 57.353824 93.973) (xy 57.353824 93.925) (xy 57.345104 93.836463)
(xy 57.319279 93.751329) (xy 57.318569 93.75) (xy 57.319279 93.748671) (xy 57.345104 93.663537) (xy 57.353824 93.575)
(xy 57.353824 93.425) (xy 57.345104 93.336463) (xy 57.319279 93.251329) (xy 57.318569 93.25) (xy 57.319279 93.248671)
(xy 57.345104 93.163537) (xy 57.353824 93.075) (xy 57.353824 92.925) (xy 57.345104 92.836463) (xy 57.319279 92.751329)
(xy 57.318569 92.75) (xy 57.319279 92.748671) (xy 57.345104 92.663537) (xy 57.353824 92.575) (xy 57.353824 92.425)
(xy 57.345104 92.336463) (xy 57.319279 92.251329) (xy 57.318569 92.25) (xy 57.319279 92.248671) (xy 57.345104 92.163537)
(xy 57.353824 92.075) (xy 57.353824 91.925) (xy 57.345104 91.836463) (xy 57.319279 91.751329) (xy 57.318569 91.75)
(xy 57.319279 91.748671) (xy 57.345104 91.663537) (xy 57.353824 91.575) (xy 57.353824 91.425) (xy 57.345104 91.336463)
(xy 57.319279 91.251329) (xy 57.318569 91.25) (xy 57.319279 91.248671) (xy 57.345104 91.163537) (xy 57.353824 91.075)
(xy 57.353824 90.925) (xy 57.345104 90.836463) (xy 57.319279 90.751329) (xy 57.318569 90.75) (xy 57.319279 90.748671)
(xy 57.345104 90.663537) (xy 57.353824 90.575) (xy 57.353824 90.425) (xy 57.345104 90.336463) (xy 57.319279 90.251329)
(xy 57.318569 90.25) (xy 57.319279 90.248671) (xy 57.345104 90.163537) (xy 57.353824 90.075) (xy 57.353824 90.002)
(xy 57.498 90.002) (xy 57.498001 90.725347) (xy 57.495573 90.75) (xy 57.505265 90.848409) (xy 57.53397 90.943036)
(xy 57.580584 91.030245) (xy 57.627601 91.087535) (xy 57.627604 91.087538) (xy 57.643317 91.106684) (xy 57.662462 91.122396)
(xy 57.878259 91.338194) (xy 57.897095 91.432889) (xy 57.94436 91.546996) (xy 58.012977 91.649689) (xy 58.100311 91.737023)
(xy 58.203004 91.80564) (xy 58.317111 91.852905) (xy 58.438246 91.877) (xy 58.561754 91.877) (xy 58.682889 91.852905)
(xy 58.796996 91.80564) (xy 58.899689 91.737023) (xy 58.987023 91.649689) (xy 59.05564 91.546996) (xy 59.102905 91.432889)
(xy 59.127 91.311754) (xy 59.127 91.188246) (xy 59.102905 91.067111) (xy 59.05564 90.953004) (xy 58.987023 90.850311)
(xy 58.899689 90.762977) (xy 58.796996 90.69436) (xy 58.682889 90.647095) (xy 58.588194 90.628259) (xy 58.502 90.542065)
(xy 58.502 89.774642) (xy 58.504427 89.749999) (xy 58.502 89.725356) (xy 58.502 89.725347) (xy 58.494736 89.651591)
(xy 58.466031 89.556964) (xy 58.419417 89.469755) (xy 58.356684 89.393316) (xy 58.337532 89.377598) (xy 58.313758 89.353824)
(xy 58.43125 89.353824) (xy 58.547831 89.342342) (xy 58.659932 89.308336) (xy 58.763244 89.253115) (xy 58.773943 89.244334)
(xy 58.819463 89.329494) (xy 58.898815 89.426185) (xy 58.995506 89.505537) (xy 59.10582 89.564502) (xy 59.225518 89.600812)
(xy 59.35 89.613072) (xy 59.50175 89.61) (xy 59.6605 89.45125) (xy 59.6605 88.627) (xy 59.6405 88.627)
(xy 59.6405 88.373) (xy 59.6605 88.373) (xy 59.6605 87.54875) (xy 59.61175 87.5) (xy 59.6605 87.45125)
(xy 59.6605 86.627) (xy 59.6405 86.627) (xy 59.6405 86.373) (xy 59.6605 86.373) (xy 59.6605 86.353)
(xy 59.9145 86.353)
)
)
Improved layout, Add QR code, Add external ADC option for 22 bit ADC
2019-12-26 18:01:55 +01:00
(filled_polygon
(pts
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 35.499049 91.854339) (xy 35.515552 91.874448) (xy 35.595798 91.940304) (xy 35.656969 91.973) (xy 33.32824 91.973)
(xy 33.282167 91.926927) (xy 33.132447 91.826888) (xy 33.35 91.828072) (xy 33.474482 91.815812) (xy 33.59418 91.779502)
(xy 33.704494 91.720537) (xy 33.801185 91.641185) (xy 33.880537 91.544494) (xy 33.939502 91.43418) (xy 33.975812 91.314482)
(xy 33.988072 91.19) (xy 33.985 90.62575) (xy 33.826252 90.467002) (xy 33.985 90.467002) (xy 33.985 90.34029)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
)
)
(filled_polygon
(pts
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 37.616195 90.541755) (xy 37.602979 90.572437) (xy 37.593685 90.615962) (xy 37.583172 90.659216) (xy 37.581767 90.692597)
(xy 37.581707 90.693127) (xy 37.580626 90.696691) (xy 37.575904 90.74464) (xy 37.573416 90.766719) (xy 37.573364 90.770423)
(xy 37.573 90.77412) (xy 37.573 90.796408) (xy 37.572326 90.844514) (xy 37.573 90.84817) (xy 37.573 91.042842)
(xy 37.547321 91.030029) (xy 37.515093 91.021232) (xy 37.497124 91.014944) (xy 37.46645 91.001731) (xy 37.422906 90.992432)
(xy 37.379651 90.981919) (xy 37.354016 90.98084) (xy 37.35331 90.980626) (xy 37.305364 90.975904) (xy 37.283296 90.973417)
(xy 37.279586 90.973365) (xy 37.275881 90.973) (xy 37.253616 90.973) (xy 37.205501 90.972324) (xy 37.201834 90.973)
(xy 36.10829 90.973) (xy 35.66229 90.527) (xy 37.621358 90.527)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
)
)
(filled_polygon
(pts
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 42.949256 84.253115) (xy 42.973001 84.265807) (xy 42.973 84.89) (xy 42.872998 84.89) (xy 42.872998 84.944748)
(xy 42.81825 84.89) (xy 42.716642 84.90102) (xy 42.671931 84.915279) (xy 42.667204 84.867285) (xy 42.628492 84.73967)
(xy 42.565628 84.622059) (xy 42.53599 84.585945) (xy 42.60668 84.564502) (xy 42.716994 84.505537) (xy 42.813685 84.426185)
(xy 42.893037 84.329494) (xy 42.938557 84.244334)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
)
)
(filled_polygon
(pts
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 40.317111 77.102905) (xy 40.367673 77.112962) (xy 43.760511 80.505801) (xy 43.76051 82.650289) (xy 43.71875 82.646176)
(xy 43.28125 82.646176) (xy 43.164669 82.657658) (xy 43.052568 82.691664) (xy 42.949256 82.746885) (xy 42.938557 82.755666)
(xy 42.893037 82.670506) (xy 42.813685 82.573815) (xy 42.716994 82.494463) (xy 42.60668 82.435498) (xy 42.486982 82.399188)
(xy 42.3625 82.386928) (xy 42.21075 82.39) (xy 42.052 82.54875) (xy 42.052 83.373) (xy 42.072 83.373)
(xy 42.072 83.627) (xy 42.052 83.627) (xy 42.052 83.647) (xy 41.798 83.647) (xy 41.798 83.627)
(xy 41.778 83.627) (xy 41.778 83.373) (xy 41.798 83.373) (xy 41.798 82.54875) (xy 41.63925 82.39)
(xy 41.4875 82.386928) (xy 41.363018 82.399188) (xy 41.24332 82.435498) (xy 41.133006 82.494463) (xy 41.036315 82.573815)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(xy 40.956963 82.670506) (xy 40.897998 82.78082) (xy 40.877 82.850041) (xy 40.877 81.5) (xy 40.869756 81.426451)
(xy 40.848303 81.355728) (xy 40.813464 81.29055) (xy 40.766579 81.233421) (xy 40.70945 81.186536) (xy 40.644272 81.151697)
(xy 40.573549 81.130244) (xy 40.5 81.123) (xy 38.246273 81.123) (xy 38.197677 81.108259) (xy 38.075 81.096176)
(xy 37.2395 81.096176) (xy 37.2395 80.765806) (xy 37.263244 80.753115) (xy 37.353799 80.678799) (xy 37.428115 80.588244)
(xy 37.483336 80.484932) (xy 37.5 80.429999) (xy 37.516664 80.484932) (xy 37.571885 80.588244) (xy 37.646201 80.678799)
(xy 37.736756 80.753115) (xy 37.840068 80.808336) (xy 37.952169 80.842342) (xy 38.06875 80.853824) (xy 38.50625 80.853824)
(xy 38.622831 80.842342) (xy 38.734932 80.808336) (xy 38.838244 80.753115) (xy 38.928799 80.678799) (xy 39.003115 80.588244)
(xy 39.058336 80.484932) (xy 39.089333 80.382749) (xy 39.099448 80.374448) (xy 39.115955 80.354334) (xy 39.862328 79.607962)
(xy 39.912889 79.597905) (xy 40.026996 79.55064) (xy 40.129689 79.482023) (xy 40.217023 79.394689) (xy 40.28564 79.291996)
(xy 40.332905 79.177889) (xy 40.357 79.056754) (xy 40.357 78.933246) (xy 40.332905 78.812111) (xy 40.28564 78.698004)
(xy 40.257 78.655141) (xy 40.257 77.078006)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
)
)
(filled_polygon
(pts
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 38.131358 73.626293) (xy 38.203 73.697935) (xy 38.203001 76.494109) (xy 38.200451 76.52) (xy 38.203 76.545881)
(xy 38.203 77.146176) (xy 38.06875 77.146176) (xy 37.952169 77.157658) (xy 37.840068 77.191664) (xy 37.736756 77.246885)
(xy 37.646201 77.321201) (xy 37.571885 77.411756) (xy 37.516664 77.515068) (xy 37.5 77.570001) (xy 37.483336 77.515068)
(xy 37.428115 77.411756) (xy 37.353799 77.321201) (xy 37.263244 77.246885) (xy 37.159932 77.191664) (xy 37.047831 77.157658)
(xy 36.93125 77.146176) (xy 36.49375 77.146176) (xy 36.377169 77.157658) (xy 36.265068 77.191664) (xy 36.161756 77.246885)
(xy 36.071201 77.321201) (xy 35.996885 77.411756) (xy 35.941664 77.515068) (xy 35.907658 77.627169) (xy 35.896176 77.74375)
(xy 35.896176 78.25625) (xy 35.907658 78.372831) (xy 35.941664 78.484932) (xy 35.996885 78.588244) (xy 36.071201 78.678799)
(xy 36.161756 78.753115) (xy 36.1855 78.765807) (xy 36.185501 79.234193) (xy 36.161756 79.246885) (xy 36.071201 79.321201)
(xy 35.996885 79.411756) (xy 35.941664 79.515068) (xy 35.907658 79.627169) (xy 35.896176 79.74375) (xy 35.896176 80.25625)
(xy 35.907658 80.372831) (xy 35.941664 80.484932) (xy 35.996885 80.588244) (xy 36.071201 80.678799) (xy 36.161756 80.753115)
(xy 36.1855 80.765807) (xy 36.185501 81.096176) (xy 35.925 81.096176) (xy 35.802323 81.108259) (xy 35.684359 81.144042)
(xy 35.575644 81.202152) (xy 35.55024 81.223) (xy 32.213265 81.223) (xy 28.650597 77.660332) (xy 28.623133 77.626867)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(xy 28.489592 77.517273) (xy 28.337237 77.435838) (xy 28.171922 77.38569) (xy 28.043079 77.373) (xy 28 77.368757)
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 27.956921 77.373) (xy 22.301465 77.373) (xy 21.877 76.948535) (xy 21.877 73.677) (xy 26.026288 73.677)
(xy 25.992977 73.710311) (xy 25.92436 73.813004) (xy 25.877095 73.927111) (xy 25.853 74.048246) (xy 25.853 74.171754)
(xy 25.877095 74.292889) (xy 25.92436 74.406996) (xy 25.992977 74.509689) (xy 26.080311 74.597023) (xy 26.134155 74.633)
(xy 26.068246 74.633) (xy 25.947111 74.657095) (xy 25.833004 74.70436) (xy 25.730311 74.772977) (xy 25.642977 74.860311)
(xy 25.57436 74.963004) (xy 25.527095 75.077111) (xy 25.503 75.198246) (xy 25.503 75.321754) (xy 25.527095 75.442889)
(xy 25.57436 75.556996) (xy 25.642977 75.659689) (xy 25.730311 75.747023) (xy 25.833004 75.81564) (xy 25.947111 75.862905)
(xy 26.068246 75.887) (xy 26.191754 75.887) (xy 26.312889 75.862905) (xy 26.426996 75.81564) (xy 26.469859 75.787)
(xy 26.859649 75.787) (xy 26.850012 75.80503) (xy 26.828455 75.876095) (xy 26.821176 75.95) (xy 26.821176 76.65)
(xy 26.828455 76.723905) (xy 26.850012 76.79497) (xy 26.885019 76.860463) (xy 26.932131 76.917869) (xy 26.989537 76.964981)
(xy 27.05503 76.999988) (xy 27.126095 77.021545) (xy 27.2 77.028824) (xy 28.8 77.028824) (xy 28.873905 77.021545)
(xy 28.94497 76.999988) (xy 29.010463 76.964981) (xy 29.023 76.954692) (xy 29.023 77.149119) (xy 29.020451 77.175)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(xy 29.030626 77.278309) (xy 29.060761 77.377649) (xy 29.107692 77.465451) (xy 29.109697 77.469202) (xy 29.175553 77.549448)
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 29.195662 77.565951) (xy 30.984053 79.354344) (xy 31.000552 79.374448) (xy 31.080798 79.440304) (xy 31.17235 79.489239)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(xy 31.255208 79.514374) (xy 31.27169 79.519374) (xy 31.375 79.529549) (xy 31.400881 79.527) (xy 33.160141 79.527)
(xy 33.203004 79.55564) (xy 33.317111 79.602905) (xy 33.438246 79.627) (xy 33.561754 79.627) (xy 33.682889 79.602905)
(xy 33.796996 79.55564) (xy 33.899689 79.487023) (xy 33.987023 79.399689) (xy 34.05564 79.296996) (xy 34.102905 79.182889)
(xy 34.127 79.061754) (xy 34.127 78.938246) (xy 34.102905 78.817111) (xy 34.05564 78.703004) (xy 33.987023 78.600311)
(xy 33.899689 78.512977) (xy 33.796996 78.44436) (xy 33.682889 78.397095) (xy 33.561754 78.373) (xy 33.438246 78.373)
(xy 33.317111 78.397095) (xy 33.203004 78.44436) (xy 33.160141 78.473) (xy 31.593291 78.473) (xy 30.971969 77.851679)
(xy 30.99375 77.853824) (xy 31.43125 77.853824) (xy 31.547831 77.842342) (xy 31.659932 77.808336) (xy 31.763244 77.753115)
(xy 31.853799 77.678799) (xy 31.928115 77.588244) (xy 31.983336 77.484932) (xy 32 77.429999) (xy 32.016664 77.484932)
(xy 32.071885 77.588244) (xy 32.146201 77.678799) (xy 32.236756 77.753115) (xy 32.340068 77.808336) (xy 32.452169 77.842342)
(xy 32.56875 77.853824) (xy 33.00625 77.853824) (xy 33.122831 77.842342) (xy 33.234932 77.808336) (xy 33.338244 77.753115)
(xy 33.428799 77.678799) (xy 33.503115 77.588244) (xy 33.558336 77.484932) (xy 33.592342 77.372831) (xy 33.603824 77.25625)
(xy 33.603824 76.74375) (xy 33.592342 76.627169) (xy 33.558336 76.515068) (xy 33.503115 76.411756) (xy 33.428799 76.321201)
(xy 33.34204 76.25) (xy 33.428799 76.178799) (xy 33.503115 76.088244) (xy 33.558336 75.984932) (xy 33.592342 75.872831)
(xy 33.603824 75.75625) (xy 33.603824 75.24375) (xy 33.592342 75.127169) (xy 33.558336 75.015068) (xy 33.503115 74.911756)
(xy 33.428799 74.821201) (xy 33.34204 74.75) (xy 33.428799 74.678799) (xy 33.503115 74.588244) (xy 33.558336 74.484932)
(xy 33.592342 74.372831) (xy 33.603824 74.25625) (xy 33.603824 73.937) (xy 35.080533 73.937) (xy 34.974812 74.042721)
(xy 34.803602 74.298955) (xy 34.685671 74.583667) (xy 34.62555 74.885915) (xy 34.62555 75.194085) (xy 34.685671 75.496333)
(xy 34.803602 75.781045) (xy 34.974812 76.037279) (xy 35.192721 76.255188) (xy 35.448955 76.426398) (xy 35.733667 76.544329)
(xy 36.035915 76.60445) (xy 36.344085 76.60445) (xy 36.646333 76.544329) (xy 36.931045 76.426398) (xy 37.187279 76.255188)
(xy 37.405188 76.037279) (xy 37.576398 75.781045) (xy 37.694329 75.496333) (xy 37.75445 75.194085) (xy 37.75445 74.885915)
(xy 37.694329 74.583667) (xy 37.576398 74.298955) (xy 37.405188 74.042721) (xy 37.239382 73.876915) (xy 37.384093 73.9057)
(xy 37.535907 73.9057) (xy 37.684805 73.876082) (xy 37.825063 73.817985) (xy 37.951293 73.733642) (xy 38.058642 73.626293)
(xy 38.095 73.571879)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
)
)
(filled_polygon
(pts
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 51.681201 77.994701) (xy 51.765949 78.04) (xy 51.681201 78.085299) (xy 51.601065 78.151065) (xy 51.535299 78.231201)
(xy 51.48643 78.322628) (xy 51.456337 78.421832) (xy 51.446176 78.525) (xy 51.446176 78.825) (xy 51.456337 78.928168)
(xy 51.48643 79.027372) (xy 51.519098 79.08849) (xy 51.470506 79.114463) (xy 51.373815 79.193815) (xy 51.294463 79.290506)
(xy 51.235498 79.40082) (xy 51.199188 79.520518) (xy 51.186928 79.645) (xy 51.19 79.65925) (xy 51.34875 79.818)
(xy 52.723 79.818) (xy 52.723 79.798) (xy 52.977 79.798) (xy 52.977 79.818) (xy 52.997 79.818)
(xy 52.997 80.072) (xy 52.977 80.072) (xy 52.977 80.092) (xy 52.723 80.092) (xy 52.723 80.072)
(xy 51.34875 80.072) (xy 51.19 80.23075) (xy 51.186928 80.245) (xy 51.199188 80.369482) (xy 51.235498 80.48918)
(xy 51.294463 80.599494) (xy 51.373815 80.696185) (xy 51.452183 80.7605) (xy 50.765806 80.7605) (xy 50.753115 80.736756)
(xy 50.744334 80.726057) (xy 50.829494 80.680537) (xy 50.926185 80.601185) (xy 51.005537 80.504494) (xy 51.064502 80.39418)
(xy 51.100812 80.274482) (xy 51.113072 80.15) (xy 51.11 79.99825) (xy 50.95125 79.8395) (xy 50.127 79.8395)
(xy 50.127 79.8595) (xy 49.873 79.8595) (xy 49.873 79.8395) (xy 49.853 79.8395) (xy 49.853 79.5855)
(xy 49.873 79.5855) (xy 49.873 78.79875) (xy 50.127 78.79875) (xy 50.127 79.5855) (xy 50.95125 79.5855)
(xy 51.11 79.42675) (xy 51.113072 79.275) (xy 51.100812 79.150518) (xy 51.064502 79.03082) (xy 51.005537 78.920506)
(xy 50.926185 78.823815) (xy 50.829494 78.744463) (xy 50.71918 78.685498) (xy 50.599482 78.649188) (xy 50.475 78.636928)
(xy 50.28575 78.64) (xy 50.127 78.79875) (xy 49.873 78.79875) (xy 49.71425 78.64) (xy 49.525 78.636928)
(xy 49.400518 78.649188) (xy 49.297 78.68059) (xy 49.297 78.448289) (xy 49.81329 77.932) (xy 51.6048 77.932)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
)
)
(filled_polygon
(pts
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 40.671358 72.356293) (xy 40.778707 72.463642) (xy 40.833121 72.5) (xy 40.778707 72.536358) (xy 40.671358 72.643707)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(xy 40.587015 72.769937) (xy 40.528918 72.910195) (xy 40.4993 73.059093) (xy 40.4993 73.16041) (xy 39.895662 73.764049)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(xy 39.875553 73.780552) (xy 39.846627 73.815799) (xy 39.809696 73.860799) (xy 39.760761 73.952351) (xy 39.730626 74.051691)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(xy 39.720451 74.155) (xy 39.723001 74.18089) (xy 39.723 75.53171) (xy 39.375662 75.879049) (xy 39.355553 75.895552)
(xy 39.332586 75.923538) (xy 39.292889 75.907095) (xy 39.257 75.899956) (xy 39.257 73.697935) (xy 39.328642 73.626293)
(xy 39.412985 73.500063) (xy 39.471082 73.359805) (xy 39.5007 73.210907) (xy 39.5007 73.059093) (xy 39.471082 72.910195)
(xy 39.412985 72.769937) (xy 39.328642 72.643707) (xy 39.221293 72.536358) (xy 39.166879 72.5) (xy 39.221293 72.463642)
(xy 39.328642 72.356293) (xy 39.365 72.301879) (xy 39.401358 72.356293) (xy 39.508707 72.463642) (xy 39.634937 72.547985)
(xy 39.775195 72.606082) (xy 39.924093 72.6357) (xy 40.075907 72.6357) (xy 40.224805 72.606082) (xy 40.365063 72.547985)
(xy 40.491293 72.463642) (xy 40.598642 72.356293) (xy 40.635 72.301879)
)
)
(filled_polygon
(pts
(xy 33.69436 65.796996) (xy 33.762977 65.899689) (xy 33.850311 65.987023) (xy 33.953004 66.05564) (xy 34.067111 66.102905)
(xy 34.188246 66.127) (xy 34.311754 66.127) (xy 34.432889 66.102905) (xy 34.546996 66.05564) (xy 34.589859 66.027)
(xy 39.399121 66.027) (xy 39.330311 66.072977) (xy 39.242977 66.160311) (xy 39.17436 66.263004) (xy 39.127095 66.377111)
(xy 39.117038 66.427672) (xy 38.375662 67.169049) (xy 38.355553 67.185552) (xy 38.302149 67.250625) (xy 38.289696 67.265799)
(xy 38.240761 67.357351) (xy 38.210626 67.456691) (xy 38.200451 67.56) (xy 38.203001 67.585891) (xy 38.203 70.526288)
(xy 38.129689 70.452977) (xy 38.026996 70.38436) (xy 37.912889 70.337095) (xy 37.791754 70.313) (xy 37.714883 70.313)
(xy 37.75445 70.114085) (xy 37.75445 69.805915) (xy 37.694329 69.503667) (xy 37.576398 69.218955) (xy 37.405188 68.962721)
(xy 37.187279 68.744812) (xy 36.931045 68.573602) (xy 36.646333 68.455671) (xy 36.344085 68.39555) (xy 36.035915 68.39555)
(xy 35.733667 68.455671) (xy 35.448955 68.573602) (xy 35.192721 68.744812) (xy 34.974812 68.962721) (xy 34.803602 69.218955)
(xy 34.685671 69.503667) (xy 34.62555 69.805915) (xy 34.62555 70.114085) (xy 34.685671 70.416333) (xy 34.803602 70.701045)
(xy 34.974812 70.957279) (xy 35.192721 71.175188) (xy 35.448955 71.346398) (xy 35.733667 71.464329) (xy 36.035915 71.52445)
(xy 36.344085 71.52445) (xy 36.646333 71.464329) (xy 36.85992 71.375859) (xy 36.777015 71.499937) (xy 36.718918 71.640195)
(xy 36.690104 71.785052) (xy 36.603189 71.726977) (xy 36.444441 71.661222) (xy 36.275914 71.6277) (xy 36.104086 71.6277)
(xy 35.935559 71.661222) (xy 35.776811 71.726977) (xy 35.633941 71.82244) (xy 35.51244 71.943941) (xy 35.416977 72.086811)
(xy 35.351222 72.245559) (xy 35.3177 72.414086) (xy 35.3177 72.585914) (xy 35.351222 72.754441) (xy 35.404472 72.883)
(xy 33.861579 72.883) (xy 33.86 72.78575) (xy 33.70125 72.627) (xy 32.9145 72.627) (xy 32.9145 72.647)
(xy 32.6605 72.647) (xy 32.6605 72.627) (xy 32.6405 72.627) (xy 32.6405 72.373) (xy 32.6605 72.373)
(xy 32.6605 72.353) (xy 32.9145 72.353) (xy 32.9145 72.373) (xy 33.70125 72.373) (xy 33.86 72.21425)
(xy 33.863072 72.025) (xy 33.850812 71.900518) (xy 33.814502 71.78082) (xy 33.755537 71.670506) (xy 33.676185 71.573815)
(xy 33.579494 71.494463) (xy 33.5588 71.483402) (xy 33.592342 71.372831) (xy 33.603824 71.25625) (xy 33.603824 70.74375)
(xy 33.592342 70.627169) (xy 33.558336 70.515068) (xy 33.503115 70.411756) (xy 33.428799 70.321201) (xy 33.34204 70.25)
(xy 33.428799 70.178799) (xy 33.503115 70.088244) (xy 33.558336 69.984932) (xy 33.592342 69.872831) (xy 33.603824 69.75625)
(xy 33.603824 69.24375) (xy 33.592342 69.127169) (xy 33.558336 69.015068) (xy 33.503115 68.911756) (xy 33.428799 68.821201)
(xy 33.34204 68.75) (xy 33.428799 68.678799) (xy 33.503115 68.588244) (xy 33.558336 68.484932) (xy 33.566559 68.457824)
(xy 33.627111 68.482905) (xy 33.748246 68.507) (xy 33.871754 68.507) (xy 33.992889 68.482905) (xy 34.106996 68.43564)
(xy 34.209689 68.367023) (xy 34.297023 68.279689) (xy 34.36564 68.176996) (xy 34.412905 68.062889) (xy 34.437 67.941754)
(xy 34.437 67.818246) (xy 34.412905 67.697111) (xy 34.36564 67.583004) (xy 34.297023 67.480311) (xy 34.209689 67.392977)
(xy 34.106996 67.32436) (xy 33.992889 67.277095) (xy 33.871754 67.253) (xy 33.748246 67.253) (xy 33.627111 67.277095)
(xy 33.513004 67.32436) (xy 33.470141 67.353) (xy 33.454896 67.353) (xy 33.428799 67.321201) (xy 33.338244 67.246885)
(xy 33.234932 67.191664) (xy 33.122831 67.157658) (xy 33.00625 67.146176) (xy 32.56875 67.146176) (xy 32.452169 67.157658)
(xy 32.340068 67.191664) (xy 32.236756 67.246885) (xy 32.232006 67.250783) (xy 33.691851 65.790939)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
)
)
(filled_polygon
(pts
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 39.301139 63.805139) (xy 39.340984 63.825021) (xy 39.373217 63.833819) (xy 39.401758 63.843807) (xy 39.432437 63.857021)
(xy 39.475952 63.866313) (xy 39.519216 63.876828) (xy 39.552595 63.878233) (xy 39.553126 63.878293) (xy 39.55669 63.879374)
(xy 39.604639 63.884096) (xy 39.626718 63.886584) (xy 39.630422 63.886636) (xy 39.634119 63.887) (xy 39.656409 63.887)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(xy 39.704514 63.887674) (xy 39.708169 63.887) (xy 44.171711 63.887) (xy 46.473 66.18829) (xy 46.473 66.977709)
(xy 44.640955 65.145666) (xy 44.624448 65.125552) (xy 44.544202 65.059696) (xy 44.45265 65.010761) (xy 44.35331 64.980626)
(xy 44.275881 64.973) (xy 44.25 64.970451) (xy 44.224119 64.973) (xy 34.589859 64.973) (xy 34.546996 64.94436)
(xy 34.540939 64.941851) (xy 35.59579 63.887) (xy 37.632786 63.887) (xy 37.633 63.902274) (xy 37.633 63.924564)
(xy 37.633364 63.928261) (xy 37.633416 63.931965) (xy 37.635903 63.954043) (xy 37.640626 64.001993) (xy 37.641707 64.005557)
(xy 37.641767 64.006087) (xy 37.643172 64.039466) (xy 37.653683 64.082712) (xy 37.662979 64.126246) (xy 37.676197 64.156932)
(xy 37.68618 64.185462) (xy 37.694979 64.217698) (xy 37.714861 64.257543) (xy 37.733603 64.2979) (xy 37.753316 64.324872)
(xy 37.769396 64.350463) (xy 37.785146 64.37993) (xy 37.81339 64.414345) (xy 37.84065 64.449529) (xy 37.865871 64.471439)
(xy 37.887243 64.492811) (xy 37.909153 64.518032) (xy 37.944346 64.545299) (xy 37.978752 64.573535) (xy 38.008212 64.589282)
(xy 38.03381 64.605366) (xy 38.060782 64.625079) (xy 38.101139 64.643821) (xy 38.140984 64.663703) (xy 38.173217 64.672501)
(xy 38.201746 64.682484) (xy 38.232429 64.695701) (xy 38.275957 64.704996) (xy 38.319216 64.71551) (xy 38.352593 64.716915)
(xy 38.382638 64.7203) (xy 38.415495 64.726358) (xy 38.46 64.725733) (xy 38.504506 64.726358) (xy 38.537359 64.720301)
(xy 38.567408 64.716915) (xy 38.600783 64.71551) (xy 38.644023 64.705) (xy 38.68757 64.695701) (xy 38.718254 64.682484)
(xy 38.746779 64.672502) (xy 38.779015 64.663703) (xy 38.81886 64.643821) (xy 38.859217 64.625079) (xy 38.886189 64.605366)
(xy 38.91178 64.589286) (xy 38.941247 64.573536) (xy 38.975662 64.545292) (xy 39.010846 64.518032) (xy 39.032756 64.492811)
(xy 39.054128 64.471439) (xy 39.079349 64.449529) (xy 39.106616 64.414336) (xy 39.134852 64.37993) (xy 39.150599 64.35047)
(xy 39.166683 64.324872) (xy 39.186396 64.2979) (xy 39.205138 64.257543) (xy 39.22502 64.217698) (xy 39.233818 64.185465)
(xy 39.243803 64.156932) (xy 39.257018 64.126253) (xy 39.266314 64.082721) (xy 39.276827 64.039466) (xy 39.278232 64.006092)
(xy 39.278292 64.005561) (xy 39.279374 64.001993) (xy 39.284098 63.954029) (xy 39.286583 63.931974) (xy 39.286635 63.92827)
(xy 39.287 63.924564) (xy 39.287 63.902266) (xy 39.287675 63.854178) (xy 39.287 63.850517) (xy 39.287 63.798573)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
)
)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(zone (net 1) (net_name Earth) (layer B.Cu) (tstamp 5E1002D4) (hatch edge 0.508)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(connect_pads (clearance 0.25))
(min_thickness 0.254)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
(fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(polygon
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(pts
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 98 15) (xy 18 15) (xy 18 13) (xy 98 13)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
)
)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
(filled_polygon
(pts
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 97.598001 14.873) (xy 18.402 14.873) (xy 18.402 13.402) (xy 97.598001 13.402)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
)
)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(zone (net 1) (net_name Earth) (layer F.Cu) (tstamp 5E1002D1) (hatch edge 0.508)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(connect_pads (clearance 0.25))
(min_thickness 0.254)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
(fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(polygon
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(pts
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 98 15) (xy 18 15) (xy 18 13) (xy 98 13)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
)
)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
(filled_polygon
(pts
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 97.598001 14.873) (xy 18.402 14.873) (xy 18.402 13.402) (xy 97.598001 13.402)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
)
)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(zone (net 1) (net_name Earth) (layer B.Cu) (tstamp 5E1002CE) (hatch edge 0.508)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(connect_pads (clearance 0.25))
(min_thickness 0.254)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
(fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(polygon
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(pts
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 98 113) (xy 18 113) (xy 18 111) (xy 98 111)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
)
)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
(filled_polygon
(pts
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 97.598 112.598) (xy 18.402 112.598) (xy 18.402 111.127) (xy 97.598 111.127)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
)
)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(zone (net 1) (net_name Earth) (layer F.Cu) (tstamp 5E1002CB) (hatch edge 0.508)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(connect_pads (clearance 0.25))
(min_thickness 0.254)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
(fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(polygon
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(pts
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 98 113) (xy 18 113) (xy 18 111) (xy 98 111)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
)
)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
(filled_polygon
(pts
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(xy 97.598 112.598) (xy 18.402 112.598) (xy 18.402 111.127) (xy 97.598 111.127)
)
)
)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(zone (net 2) (net_name GND) (layer B.Cu) (tstamp 5E1002C8) (hatch edge 0.508)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(priority 4)
(connect_pads (clearance 0.25))
(min_thickness 0.254)
(fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
(polygon
(pts
(xy 50 104.5) (xy 52 106.5) (xy 53.5 106.5) (xy 53.5 108.5) (xy 46.5 108.5)
(xy 46.5 103) (xy 50 103)
)
)
(filled_polygon
(pts
(xy 49.873 103.178289) (xy 49.873 104.5) (xy 49.87544 104.524776) (xy 49.882667 104.548601) (xy 49.894403 104.570557)
(xy 49.910197 104.589803) (xy 51.910197 106.589803) (xy 51.929443 106.605597) (xy 51.951399 106.617333) (xy 51.975224 106.62456)
(xy 52 106.627) (xy 53.373 106.627) (xy 53.373 108.373) (xy 46.627 108.373) (xy 46.627 105.24375)
(xy 46.896176 105.24375) (xy 46.896176 105.75625) (xy 46.907658 105.872831) (xy 46.941664 105.984932) (xy 46.996885 106.088244)
(xy 47.071201 106.178799) (xy 47.161756 106.253115) (xy 47.1855 106.265806) (xy 47.1855 106.266619) (xy 47.182951 106.2925)
(xy 47.1855 106.31838) (xy 47.193126 106.395809) (xy 47.223261 106.495149) (xy 47.272196 106.586702) (xy 47.338052 106.666948)
(xy 47.358166 106.683455) (xy 47.527038 106.852327) (xy 47.537095 106.902889) (xy 47.58436 107.016996) (xy 47.652977 107.119689)
(xy 47.740311 107.207023) (xy 47.843004 107.27564) (xy 47.957111 107.322905) (xy 48.078246 107.347) (xy 48.201754 107.347)
(xy 48.322889 107.322905) (xy 48.436996 107.27564) (xy 48.539689 107.207023) (xy 48.627023 107.119689) (xy 48.69564 107.016996)
(xy 48.742905 106.902889) (xy 48.767 106.781754) (xy 48.767 106.658246) (xy 48.742905 106.537111) (xy 48.69564 106.423004)
(xy 48.627023 106.320311) (xy 48.539689 106.232977) (xy 48.436996 106.16436) (xy 48.383749 106.142304) (xy 48.428115 106.088244)
(xy 48.483336 105.984932) (xy 48.5 105.929999) (xy 48.516664 105.984932) (xy 48.571885 106.088244) (xy 48.646201 106.178799)
(xy 48.736756 106.253115) (xy 48.840068 106.308336) (xy 48.952169 106.342342) (xy 49.06875 106.353824) (xy 49.50625 106.353824)
(xy 49.622831 106.342342) (xy 49.734932 106.308336) (xy 49.838244 106.253115) (xy 49.928799 106.178799) (xy 50.003115 106.088244)
(xy 50.058336 105.984932) (xy 50.092342 105.872831) (xy 50.103824 105.75625) (xy 50.103824 105.24375) (xy 50.092342 105.127169)
(xy 50.058336 105.015068) (xy 50.003115 104.911756) (xy 49.928799 104.821201) (xy 49.838244 104.746885) (xy 49.8145 104.734194)
(xy 49.8145 104.523381) (xy 49.817049 104.4975) (xy 49.806874 104.39419) (xy 49.7849 104.321754) (xy 49.776739 104.29485)
(xy 49.727804 104.203298) (xy 49.662074 104.123205) (xy 49.652905 104.077111) (xy 49.60564 103.963004) (xy 49.537023 103.860311)
(xy 49.449689 103.772977) (xy 49.346996 103.70436) (xy 49.232889 103.657095) (xy 49.111754 103.633) (xy 48.988246 103.633)
(xy 48.867111 103.657095) (xy 48.753004 103.70436) (xy 48.650311 103.772977) (xy 48.562977 103.860311) (xy 48.49436 103.963004)
(xy 48.447095 104.077111) (xy 48.423 104.198246) (xy 48.423 104.321754) (xy 48.447095 104.442889) (xy 48.49436 104.556996)
(xy 48.562977 104.659689) (xy 48.650311 104.747023) (xy 48.697868 104.778799) (xy 48.646201 104.821201) (xy 48.571885 104.911756)
(xy 48.516664 105.015068) (xy 48.5 105.070001) (xy 48.483336 105.015068) (xy 48.428115 104.911756) (xy 48.353799 104.821201)
(xy 48.263244 104.746885) (xy 48.159932 104.691664) (xy 48.047831 104.657658) (xy 47.93125 104.646176) (xy 47.49375 104.646176)
(xy 47.377169 104.657658) (xy 47.265068 104.691664) (xy 47.161756 104.746885) (xy 47.071201 104.821201) (xy 46.996885 104.911756)
(xy 46.941664 105.015068) (xy 46.907658 105.127169) (xy 46.896176 105.24375) (xy 46.627 105.24375) (xy 46.627 103.127)
(xy 49.821711 103.127)
)
)
)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(zone (net 0) (net_name "") (layer B.Cu) (tstamp 5E1002C5) (hatch edge 0.508)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(priority 3)
(connect_pads (clearance 0.25))
(min_thickness 0.254)
(fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
(polygon
(pts
(xy 50 104.5) (xy 52 106.5) (xy 53.5 106.5) (xy 53.5 108.5) (xy 46.5 108.5)
(xy 46.5 103) (xy 50 103)
)
)
)
(zone (net 0) (net_name "") (layer F.Cu) (tstamp 0) (hatch edge 0.508)
(connect_pads (clearance 0.25))
(min_thickness 0.254)
(keepout (tracks allowed) (vias allowed) (copperpour not_allowed))
(fill (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
(polygon
(pts
(xy 43 108) (xy 42.5 108) (xy 42.5 103.5) (xy 43 103.5)
)
)
)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(zone (net 3) (net_name +8V) (layer B.Cu) (tstamp 5E1002C2) (hatch edge 0.508)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(priority 1)
(connect_pads (clearance 0.25))
(min_thickness 0.254)
(fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
(polygon
(pts
(xy 81.5 71.5) (xy 79 71.5) (xy 79 68.5) (xy 81.5 68.5)
)
)
(filled_polygon
(pts
(xy 81.373 71.373) (xy 79.127 71.373) (xy 79.127 68.627) (xy 81.373 68.627)
)
)
)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(zone (net 4) (net_name +3V3) (layer B.Cu) (tstamp 5E1002BF) (hatch edge 0.508)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(priority 1)
(connect_pads (clearance 0.25))
(min_thickness 0.254)
(fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
(polygon
(pts
(xy 51.5 93) (xy 50 93) (xy 50 94.5) (xy 49 95.5) (xy 46 92.5)
(xy 47.25 91.25) (xy 51.5 91.25)
)
)
(filled_polygon
(pts
(xy 51.373 92.873) (xy 50 92.873) (xy 49.975224 92.87544) (xy 49.951399 92.882667) (xy 49.929443 92.894403)
(xy 49.910197 92.910197) (xy 49.894403 92.929443) (xy 49.882667 92.951399) (xy 49.87544 92.975224) (xy 49.873 93)
(xy 49.873 94.447394) (xy 49 95.320394) (xy 46.179606 92.5) (xy 47.302606 91.377) (xy 51.373 91.377)
)
)
)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(zone (net 3) (net_name +8V) (layer F.Cu) (tstamp 5E1002BC) (hatch edge 0.508)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(priority 1)
(connect_pads (clearance 0.25))
(min_thickness 0.254)
(fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
(polygon
(pts
(xy 47.5 42.5) (xy 34.25 42.5) (xy 34.25 47.25) (xy 31 47.25) (xy 31 42.5)
(xy 22 42.5) (xy 22 38.25) (xy 47.5 38.25)
)
)
(filled_polygon
(pts
(xy 42 38.381243) (xy 42.043079 38.377) (xy 47.373 38.377) (xy 47.373 42.373) (xy 34.25 42.373)
(xy 34.225224 42.37544) (xy 34.201399 42.382667) (xy 34.179443 42.394403) (xy 34.160197 42.410197) (xy 34.144403 42.429443)
(xy 34.132667 42.451399) (xy 34.12544 42.475224) (xy 34.123 42.5) (xy 34.123 47.123) (xy 31.127 47.123)
(xy 31.127 45.9) (xy 31.481928 45.9) (xy 31.494188 46.024482) (xy 31.530498 46.14418) (xy 31.589463 46.254494)
(xy 31.668815 46.351185) (xy 31.765506 46.430537) (xy 31.87582 46.489502) (xy 31.995518 46.525812) (xy 32.12 46.538072)
(xy 32.43425 46.535) (xy 32.593 46.37625) (xy 32.593 44.927) (xy 32.847 44.927) (xy 32.847 46.37625)
(xy 33.00575 46.535) (xy 33.32 46.538072) (xy 33.444482 46.525812) (xy 33.56418 46.489502) (xy 33.674494 46.430537)
(xy 33.771185 46.351185) (xy 33.850537 46.254494) (xy 33.909502 46.14418) (xy 33.945812 46.024482) (xy 33.958072 45.9)
(xy 33.955 45.08575) (xy 33.79625 44.927) (xy 32.847 44.927) (xy 32.593 44.927) (xy 31.64375 44.927)
(xy 31.485 45.08575) (xy 31.481928 45.9) (xy 31.127 45.9) (xy 31.127 43.7) (xy 31.481928 43.7)
(xy 31.485 44.51425) (xy 31.64375 44.673) (xy 32.593 44.673) (xy 32.593 43.22375) (xy 32.847 43.22375)
(xy 32.847 44.673) (xy 33.79625 44.673) (xy 33.955 44.51425) (xy 33.958072 43.7) (xy 33.945812 43.575518)
(xy 33.909502 43.45582) (xy 33.850537 43.345506) (xy 33.771185 43.248815) (xy 33.674494 43.169463) (xy 33.56418 43.110498)
(xy 33.444482 43.074188) (xy 33.32 43.061928) (xy 33.00575 43.065) (xy 32.847 43.22375) (xy 32.593 43.22375)
(xy 32.43425 43.065) (xy 32.12 43.061928) (xy 31.995518 43.074188) (xy 31.87582 43.110498) (xy 31.765506 43.169463)
(xy 31.668815 43.248815) (xy 31.589463 43.345506) (xy 31.530498 43.45582) (xy 31.494188 43.575518) (xy 31.481928 43.7)
(xy 31.127 43.7) (xy 31.127 42.5) (xy 31.12456 42.475224) (xy 31.117333 42.451399) (xy 31.105597 42.429443)
(xy 31.089803 42.410197) (xy 31.070557 42.394403) (xy 31.048601 42.382667) (xy 31.024776 42.37544) (xy 31 42.373)
(xy 22.127 42.373) (xy 22.127 41.5) (xy 43.861928 41.5) (xy 43.874188 41.624482) (xy 43.910498 41.74418)
(xy 43.969463 41.854494) (xy 44.048815 41.951185) (xy 44.145506 42.030537) (xy 44.25582 42.089502) (xy 44.375518 42.125812)
(xy 44.5 42.138072) (xy 45.21425 42.135) (xy 45.373 41.97625) (xy 45.373 40.627) (xy 45.627 40.627)
(xy 45.627 41.97625) (xy 45.78575 42.135) (xy 46.5 42.138072) (xy 46.624482 42.125812) (xy 46.74418 42.089502)
(xy 46.854494 42.030537) (xy 46.951185 41.951185) (xy 47.030537 41.854494) (xy 47.089502 41.74418) (xy 47.125812 41.624482)
(xy 47.138072 41.5) (xy 47.135 40.78575) (xy 46.97625 40.627) (xy 45.627 40.627) (xy 45.373 40.627)
(xy 44.02375 40.627) (xy 43.865 40.78575) (xy 43.861928 41.5) (xy 22.127 41.5) (xy 22.127 40.8)
(xy 25.061928 40.8) (xy 25.074188 40.924482) (xy 25.110498 41.04418) (xy 25.169463 41.154494) (xy 25.248815 41.251185)
(xy 25.345506 41.330537) (xy 25.45582 41.389502) (xy 25.575518 41.425812) (xy 25.7 41.438072) (xy 26.21425 41.435)
(xy 26.373 41.27625) (xy 26.373 40.127) (xy 26.627 40.127) (xy 26.627 41.27625) (xy 26.78575 41.435)
(xy 27.3 41.438072) (xy 27.424482 41.425812) (xy 27.54418 41.389502) (xy 27.654494 41.330537) (xy 27.751185 41.251185)
(xy 27.830537 41.154494) (xy 27.889502 41.04418) (xy 27.925812 40.924482) (xy 27.938072 40.8) (xy 35.561928 40.8)
(xy 35.574188 40.924482) (xy 35.610498 41.04418) (xy 35.669463 41.154494) (xy 35.748815 41.251185) (xy 35.845506 41.330537)
(xy 35.95582 41.389502) (xy 36.075518 41.425812) (xy 36.2 41.438072) (xy 36.71425 41.435) (xy 36.873 41.27625)
(xy 36.873 40.127) (xy 37.127 40.127) (xy 37.127 41.27625) (xy 37.28575 41.435) (xy 37.8 41.438072)
(xy 37.924482 41.425812) (xy 38.04418 41.389502) (xy 38.154494 41.330537) (xy 38.251185 41.251185) (xy 38.330537 41.154494)
(xy 38.389502 41.04418) (xy 38.425812 40.924482) (xy 38.438072 40.8) (xy 38.435 40.28575) (xy 38.27625 40.127)
(xy 37.127 40.127) (xy 36.873 40.127) (xy 35.72375 40.127) (xy 35.565 40.28575) (xy 35.561928 40.8)
(xy 27.938072 40.8) (xy 27.935 40.28575) (xy 27.77625 40.127) (xy 26.627 40.127) (xy 26.373 40.127)
(xy 25.22375 40.127) (xy 25.065 40.28575) (xy 25.061928 40.8) (xy 22.127 40.8) (xy 22.127 39.2)
(xy 25.061928 39.2) (xy 25.065 39.71425) (xy 25.22375 39.873) (xy 26.373 39.873) (xy 26.373 38.72375)
(xy 26.627 38.72375) (xy 26.627 39.873) (xy 27.77625 39.873) (xy 27.935 39.71425) (xy 27.938072 39.2)
(xy 35.561928 39.2) (xy 35.565 39.71425) (xy 35.72375 39.873) (xy 36.873 39.873) (xy 36.873 38.72375)
(xy 37.127 38.72375) (xy 37.127 39.873) (xy 38.27625 39.873) (xy 38.435 39.71425) (xy 38.436279 39.5)
(xy 43.861928 39.5) (xy 43.865 40.21425) (xy 44.02375 40.373) (xy 45.373 40.373) (xy 45.373 39.02375)
(xy 45.627 39.02375) (xy 45.627 40.373) (xy 46.97625 40.373) (xy 47.135 40.21425) (xy 47.138072 39.5)
(xy 47.125812 39.375518) (xy 47.089502 39.25582) (xy 47.030537 39.145506) (xy 46.951185 39.048815) (xy 46.854494 38.969463)
(xy 46.74418 38.910498) (xy 46.624482 38.874188) (xy 46.5 38.861928) (xy 45.78575 38.865) (xy 45.627 39.02375)
(xy 45.373 39.02375) (xy 45.21425 38.865) (xy 44.5 38.861928) (xy 44.375518 38.874188) (xy 44.25582 38.910498)
(xy 44.145506 38.969463) (xy 44.048815 39.048815) (xy 43.969463 39.145506) (xy 43.910498 39.25582) (xy 43.874188 39.375518)
(xy 43.861928 39.5) (xy 38.436279 39.5) (xy 38.438072 39.2) (xy 38.425812 39.075518) (xy 38.389502 38.95582)
(xy 38.330537 38.845506) (xy 38.251185 38.748815) (xy 38.154494 38.669463) (xy 38.04418 38.610498) (xy 37.924482 38.574188)
(xy 37.8 38.561928) (xy 37.28575 38.565) (xy 37.127 38.72375) (xy 36.873 38.72375) (xy 36.71425 38.565)
(xy 36.2 38.561928) (xy 36.075518 38.574188) (xy 35.95582 38.610498) (xy 35.845506 38.669463) (xy 35.748815 38.748815)
(xy 35.669463 38.845506) (xy 35.610498 38.95582) (xy 35.574188 39.075518) (xy 35.561928 39.2) (xy 27.938072 39.2)
(xy 27.925812 39.075518) (xy 27.889502 38.95582) (xy 27.830537 38.845506) (xy 27.751185 38.748815) (xy 27.654494 38.669463)
(xy 27.54418 38.610498) (xy 27.424482 38.574188) (xy 27.3 38.561928) (xy 26.78575 38.565) (xy 26.627 38.72375)
(xy 26.373 38.72375) (xy 26.21425 38.565) (xy 25.7 38.561928) (xy 25.575518 38.574188) (xy 25.45582 38.610498)
(xy 25.345506 38.669463) (xy 25.248815 38.748815) (xy 25.169463 38.845506) (xy 25.110498 38.95582) (xy 25.074188 39.075518)
(xy 25.061928 39.2) (xy 22.127 39.2) (xy 22.127 38.377) (xy 41.95692 38.377)
)
)
)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(zone (net 4) (net_name +3V3) (layer F.Cu) (tstamp 5E1002B9) (hatch edge 0.508)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(priority 1)
(connect_pads yes (clearance 0.25))
(min_thickness 0.254)
(fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
(polygon
(pts
(xy 40.5 84.75) (xy 39 84.75) (xy 39 82.75) (xy 37.5 82.75) (xy 37.5 81.5)
(xy 40.5 81.5)
)
)
(filled_polygon
(pts
(xy 40.373 84.623) (xy 39.127 84.623) (xy 39.127 82.75) (xy 39.12456 82.725224) (xy 39.117333 82.701399)
(xy 39.105597 82.679443) (xy 39.089803 82.660197) (xy 39.070557 82.644403) (xy 39.048601 82.632667) (xy 39.024776 82.62544)
(xy 39 82.623) (xy 37.627 82.623) (xy 37.627 81.627) (xy 40.373 81.627)
)
)
)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(zone (net 2) (net_name GND) (layer B.Cu) (tstamp 5E1002B6) (hatch edge 0.508)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(connect_pads (clearance 0.25))
(min_thickness 0.254)
(fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
(polygon
(pts
(xy 67 52) (xy 83 52) (xy 83 72) (xy 98 72) (xy 98 110.5)
(xy 17 110.5) (xy 17 18) (xy 67 18)
)
)
(filled_polygon
(pts
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(xy 66.873 52) (xy 66.87544 52.024776) (xy 66.882667 52.048601) (xy 66.894403 52.070557) (xy 66.910197 52.089803)
(xy 66.929443 52.105597) (xy 66.951399 52.117333) (xy 66.975224 52.12456) (xy 67 52.127) (xy 82.098001 52.127)
(xy 82.098 71.019746) (xy 82.099721 71.037222) (xy 82.099678 71.043416) (xy 82.100226 71.049003) (xy 82.120627 71.243099)
(xy 82.127955 71.278798) (xy 82.13478 71.314579) (xy 82.136403 71.319952) (xy 82.194115 71.50639) (xy 82.208238 71.539987)
(xy 82.221883 71.57376) (xy 82.224518 71.578716) (xy 82.317343 71.750393) (xy 82.337704 71.78058) (xy 82.357668 71.811088)
(xy 82.361216 71.815438) (xy 82.48562 71.965816) (xy 82.511486 71.991503) (xy 82.536965 72.017521) (xy 82.54129 72.021099)
(xy 82.692532 72.144449) (xy 82.722888 72.164617) (xy 82.752943 72.185197) (xy 82.757876 72.187863) (xy 82.75788 72.187866)
(xy 82.757884 72.187868) (xy 82.930203 72.279491) (xy 82.963894 72.293378) (xy 82.997377 72.307729) (xy 83.002739 72.309389)
(xy 83.189576 72.365798) (xy 83.22532 72.372875) (xy 83.260955 72.38045) (xy 83.266537 72.381036) (xy 83.460487 72.400053)
(xy 83.480253 72.402) (xy 93.019747 72.402) (xy 93.040207 72.399985) (xy 93.05319 72.399985) (xy 93.058773 72.399398)
(xy 93.252722 72.377643) (xy 93.288385 72.370063) (xy 93.324104 72.36299) (xy 93.32946 72.361332) (xy 93.329464 72.361331)
(xy 93.329467 72.36133) (xy 93.515496 72.302317) (xy 93.548987 72.287963) (xy 93.58267 72.27408) (xy 93.587603 72.271412)
(xy 93.587608 72.27141) (xy 93.587612 72.271407) (xy 93.758632 72.177388) (xy 93.788709 72.156794) (xy 93.819042 72.136641)
(xy 93.823362 72.133067) (xy 93.823368 72.133063) (xy 93.823373 72.133058) (xy 93.830593 72.127) (xy 96.923 72.127)
(xy 96.923 86.689355) (xy 96.769939 86.642925) (xy 96.56764 86.623) (xy 96.5 86.616338) (xy 96.432361 86.623)
(xy 91.43236 86.623) (xy 91.33083 86.633) (xy 90.442848 86.633) (xy 90.242021 86.65278) (xy 89.984341 86.730946)
(xy 89.746861 86.857882) (xy 89.538708 87.028708) (xy 89.367882 87.236861) (xy 89.240946 87.474341) (xy 89.16278 87.732021)
(xy 89.136386 88) (xy 89.16278 88.267979) (xy 89.240946 88.525659) (xy 89.367882 88.763139) (xy 89.538708 88.971292)
(xy 89.746861 89.142118) (xy 89.984341 89.269054) (xy 90.242021 89.34722) (xy 90.442848 89.367) (xy 91.33083 89.367)
(xy 91.43236 89.377) (xy 95.123001 89.377) (xy 95.123 94.886969) (xy 95.079664 94.900164) (xy 95.014207 94.93524)
(xy 94.956851 94.982411) (xy 94.909799 95.039866) (xy 94.409799 95.789866) (xy 94.375164 95.854664) (xy 94.353533 95.925707)
(xy 94.346176 95.999604) (xy 94.353378 96.073516) (xy 94.374861 96.144603) (xy 94.409799 96.210134) (xy 94.909799 96.960134)
(xy 94.957131 97.017869) (xy 94.999768 97.05286) (xy 92.860718 99.19191) (xy 92.543373 99.060462) (xy 91.852304 98.923)
(xy 91.147696 98.923) (xy 90.456627 99.060462) (xy 89.805655 99.330103) (xy 89.219795 99.721562) (xy 88.721562 100.219795)
(xy 88.330103 100.805655) (xy 88.060462 101.456627) (xy 87.923 102.147696) (xy 87.923 102.852304) (xy 88.060462 103.543373)
(xy 88.330103 104.194345) (xy 88.721562 104.780205) (xy 89.219795 105.278438) (xy 89.805655 105.669897) (xy 90.123001 105.801346)
(xy 90.123001 106.957834) (xy 90.123 106.957844) (xy 90.123001 110.373) (xy 18.402 110.373) (xy 18.402 108.480253)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(xy 18.400313 108.463122) (xy 18.400334 108.460076) (xy 18.399786 108.45449) (xy 18.389586 108.357441) (xy 18.382261 108.321755)
(xy 18.375433 108.28596) (xy 18.37381 108.280587) (xy 18.344954 108.187368) (xy 18.330836 108.153784) (xy 18.317185 108.119995)
(xy 18.31455 108.115039) (xy 18.268137 108.029201) (xy 18.247759 107.998989) (xy 18.227813 107.968509) (xy 18.224265 107.964159)
(xy 18.162063 107.88897) (xy 18.136198 107.863285) (xy 18.11072 107.837267) (xy 18.106395 107.833689) (xy 18.030774 107.772013)
(xy 18.00039 107.751826) (xy 17.970359 107.731263) (xy 17.965422 107.728593) (xy 17.879261 107.682781) (xy 17.845555 107.668889)
(xy 17.81209 107.654545) (xy 17.806727 107.652885) (xy 17.713309 107.62468) (xy 17.677575 107.617604) (xy 17.641926 107.610027)
(xy 17.636344 107.60944) (xy 17.539227 107.599918) (xy 17.53922 107.599918) (xy 17.519747 107.598) (xy 17.127 107.598)
(xy 17.127 94.25) (xy 17.995572 94.25) (xy 17.998001 94.274663) (xy 17.998 98.975357) (xy 17.995573 99)
(xy 17.998 99.024643) (xy 17.998 99.024652) (xy 18.005264 99.098408) (xy 18.033969 99.193035) (xy 18.080583 99.280245)
(xy 18.143316 99.356684) (xy 18.162468 99.372402) (xy 18.377598 99.587532) (xy 18.393316 99.606684) (xy 18.469755 99.669417)
(xy 18.556964 99.716031) (xy 18.651591 99.744736) (xy 18.725347 99.752) (xy 18.725356 99.752) (xy 18.749999 99.754427)
(xy 18.763 99.753147) (xy 18.748455 99.801095) (xy 18.741176 99.875) (xy 18.741176 100.525) (xy 18.748455 100.598905)
(xy 18.770012 100.66997) (xy 18.805019 100.735463) (xy 18.852131 100.792869) (xy 18.909537 100.839981) (xy 18.97503 100.874988)
(xy 19.046095 100.896545) (xy 19.12 100.903824) (xy 20.18 100.903824) (xy 20.253905 100.896545) (xy 20.32497 100.874988)
(xy 20.390463 100.839981) (xy 20.447869 100.792869) (xy 20.494981 100.735463) (xy 20.512867 100.702) (xy 20.987133 100.702)
(xy 21.005019 100.735463) (xy 21.052131 100.792869) (xy 21.109537 100.839981) (xy 21.17503 100.874988) (xy 21.246095 100.896545)
(xy 21.32 100.903824) (xy 22.38 100.903824) (xy 22.453905 100.896545) (xy 22.52497 100.874988) (xy 22.590463 100.839981)
(xy 22.647869 100.792869) (xy 22.694981 100.735463) (xy 22.712867 100.702) (xy 22.749142 100.702) (xy 22.780153 100.857903)
(xy 22.872647 101.081202) (xy 23.006927 101.282167) (xy 23.177833 101.453073) (xy 23.378798 101.587353) (xy 23.602097 101.679847)
(xy 23.839151 101.727) (xy 24.080849 101.727) (xy 24.317903 101.679847) (xy 24.541202 101.587353) (xy 24.742167 101.453073)
(xy 24.913073 101.282167) (xy 25.013112 101.132447) (xy 25.011928 101.35) (xy 25.024188 101.474482) (xy 25.060498 101.59418)
(xy 25.119463 101.704494) (xy 25.198815 101.801185) (xy 25.295506 101.880537) (xy 25.40582 101.939502) (xy 25.525518 101.975812)
(xy 25.65 101.988072) (xy 26.21425 101.985) (xy 26.373 101.82625) (xy 26.373 100.627) (xy 26.627 100.627)
(xy 26.627 101.82625) (xy 26.78575 101.985) (xy 27.35 101.988072) (xy 27.474482 101.975812) (xy 27.59418 101.939502)
(xy 27.704494 101.880537) (xy 27.801185 101.801185) (xy 27.880537 101.704494) (xy 27.939502 101.59418) (xy 27.975812 101.474482)
(xy 27.988072 101.35) (xy 27.986031 100.975) (xy 28.136928 100.975) (xy 28.149188 101.099482) (xy 28.185498 101.21918)
(xy 28.244463 101.329494) (xy 28.323815 101.426185) (xy 28.420506 101.505537) (xy 28.53082 101.564502) (xy 28.650518 101.600812)
(xy 28.775 101.613072) (xy 28.92675 101.61) (xy 29.0855 101.45125) (xy 29.0855 100.627) (xy 28.29875 100.627)
(xy 28.14 100.78575) (xy 28.136928 100.975) (xy 27.986031 100.975) (xy 27.985 100.78575) (xy 27.82625 100.627)
(xy 26.627 100.627) (xy 26.373 100.627) (xy 26.353 100.627) (xy 26.353 100.373) (xy 26.373 100.373)
(xy 26.373 100.353) (xy 26.627 100.353) (xy 26.627 100.373) (xy 27.82625 100.373) (xy 27.985 100.21425)
(xy 27.98603 100.025) (xy 28.136928 100.025) (xy 28.14 100.21425) (xy 28.29875 100.373) (xy 29.0855 100.373)
(xy 29.0855 99.54875) (xy 28.92675 99.39) (xy 28.775 99.386928) (xy 28.650518 99.399188) (xy 28.53082 99.435498)
(xy 28.420506 99.494463) (xy 28.323815 99.573815) (xy 28.244463 99.670506) (xy 28.185498 99.78082) (xy 28.149188 99.900518)
(xy 28.136928 100.025) (xy 27.98603 100.025) (xy 27.988072 99.65) (xy 27.975812 99.525518) (xy 27.939502 99.40582)
(xy 27.880537 99.295506) (xy 27.801185 99.198815) (xy 27.704494 99.119463) (xy 27.59418 99.060498) (xy 27.474482 99.024188)
(xy 27.35 99.011928) (xy 27.341443 99.011975) (xy 27.348792 98.988397) (xy 26.5 98.139605) (xy 25.651208 98.988397)
(xy 25.658557 99.011975) (xy 25.65 99.011928) (xy 25.525518 99.024188) (xy 25.40582 99.060498) (xy 25.295506 99.119463)
(xy 25.198815 99.198815) (xy 25.119463 99.295506) (xy 25.060498 99.40582) (xy 25.024188 99.525518) (xy 25.011928 99.65)
(xy 25.013112 99.867553) (xy 24.913073 99.717833) (xy 24.742167 99.546927) (xy 24.541202 99.412647) (xy 24.317903 99.320153)
(xy 24.080849 99.273) (xy 23.839151 99.273) (xy 23.602097 99.320153) (xy 23.378798 99.412647) (xy 23.177833 99.546927)
(xy 23.02676 99.698) (xy 23.005958 99.698) (xy 23.018072 99.575) (xy 23.015 99.53575) (xy 22.85625 99.377)
(xy 21.977 99.377) (xy 21.977 99.397) (xy 21.723 99.397) (xy 21.723 99.377) (xy 20.84375 99.377)
(xy 20.685 99.53575) (xy 20.681928 99.575) (xy 20.694042 99.698) (xy 20.536652 99.698) (xy 20.551545 99.648905)
(xy 20.558824 99.575) (xy 20.558824 98.925) (xy 20.551545 98.851095) (xy 20.536652 98.802) (xy 20.694042 98.802)
(xy 20.681928 98.925) (xy 20.685 98.96425) (xy 20.84375 99.123) (xy 21.723 99.123) (xy 21.723 99.103)
(xy 21.977 99.103) (xy 21.977 99.123) (xy 22.85625 99.123) (xy 23.015 98.96425) (xy 23.018072 98.925)
(xy 23.005958 98.802) (xy 23.06676 98.802) (xy 23.177833 98.913073) (xy 23.378798 99.047353) (xy 23.602097 99.139847)
(xy 23.839151 99.187) (xy 24.080849 99.187) (xy 24.317903 99.139847) (xy 24.541202 99.047353) (xy 24.742167 98.913073)
(xy 24.913073 98.742167) (xy 25.047353 98.541202) (xy 25.092152 98.433049) (xy 25.149081 98.593747) (xy 25.222528 98.731157)
(xy 25.471603 98.808792) (xy 26.320395 97.96) (xy 26.679605 97.96) (xy 27.528397 98.808792) (xy 27.777472 98.731157)
(xy 27.903371 98.467117) (xy 27.975339 98.183589) (xy 27.990611 97.891469) (xy 27.948599 97.601981) (xy 27.850919 97.326253)
(xy 27.777472 97.188843) (xy 27.528397 97.111208) (xy 26.679605 97.96) (xy 26.320395 97.96) (xy 25.471603 97.111208)
(xy 25.222528 97.188843) (xy 25.096629 97.452883) (xy 25.089566 97.480709) (xy 25.047353 97.378798) (xy 24.913073 97.177833)
(xy 24.742167 97.006927) (xy 24.541202 96.872647) (xy 24.317903 96.780153) (xy 24.080849 96.733) (xy 23.839151 96.733)
(xy 23.602097 96.780153) (xy 23.378798 96.872647) (xy 23.177833 97.006927) (xy 23.006927 97.177833) (xy 22.872647 97.378798)
(xy 22.780153 97.602097) (xy 22.741185 97.798) (xy 22.712867 97.798) (xy 22.694981 97.764537) (xy 22.647869 97.707131)
(xy 22.590463 97.660019) (xy 22.52497 97.625012) (xy 22.453905 97.603455) (xy 22.38 97.596176) (xy 21.32 97.596176)
(xy 21.246095 97.603455) (xy 21.17503 97.625012) (xy 21.109537 97.660019) (xy 21.052131 97.707131) (xy 21.005019 97.764537)
(xy 20.987133 97.798) (xy 20.512867 97.798) (xy 20.494981 97.764537) (xy 20.447869 97.707131) (xy 20.390463 97.660019)
(xy 20.32497 97.625012) (xy 20.253905 97.603455) (xy 20.18 97.596176) (xy 19.12 97.596176) (xy 19.046095 97.603455)
(xy 19.002 97.616831) (xy 19.002 95.883169) (xy 19.046095 95.896545) (xy 19.12 95.903824) (xy 20.18 95.903824)
(xy 20.253905 95.896545) (xy 20.32497 95.874988) (xy 20.390463 95.839981) (xy 20.447869 95.792869) (xy 20.494981 95.735463)
(xy 20.512867 95.702) (xy 20.987133 95.702) (xy 21.005019 95.735463) (xy 21.052131 95.792869) (xy 21.109537 95.839981)
(xy 21.17503 95.874988) (xy 21.246095 95.896545) (xy 21.32 95.903824) (xy 22.38 95.903824) (xy 22.453905 95.896545)
(xy 22.52497 95.874988) (xy 22.590463 95.839981) (xy 22.647869 95.792869) (xy 22.694981 95.735463) (xy 22.712867 95.702)
(xy 22.765055 95.702) (xy 22.780153 95.777903) (xy 22.872647 96.001202) (xy 23.006927 96.202167) (xy 23.177833 96.373073)
(xy 23.378798 96.507353) (xy 23.602097 96.599847) (xy 23.839151 96.647) (xy 24.080849 96.647) (xy 24.317903 96.599847)
(xy 24.541202 96.507353) (xy 24.629436 96.448397) (xy 25.651208 96.448397) (xy 25.726514 96.69) (xy 25.651208 96.931603)
(xy 26.5 97.780395) (xy 27.348792 96.931603) (xy 27.273486 96.69) (xy 27.348792 96.448397) (xy 26.5 95.599605)
(xy 25.651208 96.448397) (xy 24.629436 96.448397) (xy 24.742167 96.373073) (xy 24.913073 96.202167) (xy 25.047353 96.001202)
(xy 25.092152 95.893049) (xy 25.149081 96.053747) (xy 25.222528 96.191157) (xy 25.471603 96.268792) (xy 26.320395 95.42)
(xy 26.679605 95.42) (xy 27.528397 96.268792) (xy 27.777472 96.191157) (xy 27.880539 95.975) (xy 28.136928 95.975)
(xy 28.149188 96.099482) (xy 28.185498 96.21918) (xy 28.244463 96.329494) (xy 28.323815 96.426185) (xy 28.420506 96.505537)
(xy 28.53082 96.564502) (xy 28.650518 96.600812) (xy 28.775 96.613072) (xy 28.92675 96.61) (xy 29.0855 96.45125)
(xy 29.0855 95.627) (xy 28.29875 95.627) (xy 28.14 95.78575) (xy 28.136928 95.975) (xy 27.880539 95.975)
(xy 27.903371 95.927117) (xy 27.975339 95.643589) (xy 27.990611 95.351469) (xy 27.948599 95.061981) (xy 27.850919 94.786253)
(xy 27.777472 94.648843) (xy 27.528397 94.571208) (xy 26.679605 95.42) (xy 26.320395 95.42) (xy 25.471603 94.571208)
(xy 25.222528 94.648843) (xy 25.096629 94.912883) (xy 25.089566 94.940709) (xy 25.047353 94.838798) (xy 24.913073 94.637833)
(xy 24.742167 94.466927) (xy 24.541202 94.332647) (xy 24.317903 94.240153) (xy 24.080849 94.193) (xy 23.839151 94.193)
(xy 23.602097 94.240153) (xy 23.378798 94.332647) (xy 23.177833 94.466927) (xy 23.012425 94.632335) (xy 23.018072 94.575)
(xy 23.015 94.53575) (xy 22.85625 94.377) (xy 21.977 94.377) (xy 21.977 94.397) (xy 21.723 94.397)
(xy 21.723 94.377) (xy 20.84375 94.377) (xy 20.685 94.53575) (xy 20.681928 94.575) (xy 20.694042 94.698)
(xy 20.536652 94.698) (xy 20.551545 94.648905) (xy 20.558824 94.575) (xy 20.558824 93.925) (xy 20.551545 93.851095)
(xy 20.536652 93.802) (xy 20.694042 93.802) (xy 20.681928 93.925) (xy 20.685 93.96425) (xy 20.84375 94.123)
(xy 21.723 94.123) (xy 21.723 94.103) (xy 21.977 94.103) (xy 21.977 94.123) (xy 22.85625 94.123)
(xy 23.015 93.96425) (xy 23.018072 93.925) (xy 23.005958 93.802) (xy 23.14676 93.802) (xy 23.177833 93.833073)
(xy 23.378798 93.967353) (xy 23.602097 94.059847) (xy 23.839151 94.107) (xy 24.080849 94.107) (xy 24.317903 94.059847)
(xy 24.541202 93.967353) (xy 24.629436 93.908397) (xy 25.651208 93.908397) (xy 25.726514 94.15) (xy 25.651208 94.391603)
(xy 26.5 95.240395) (xy 27.348792 94.391603) (xy 27.273486 94.15) (xy 27.348792 93.908397) (xy 26.5 93.059605)
(xy 25.651208 93.908397) (xy 24.629436 93.908397) (xy 24.742167 93.833073) (xy 24.913073 93.662167) (xy 25.047353 93.461202)
(xy 25.092152 93.353049) (xy 25.149081 93.513747) (xy 25.222528 93.651157) (xy 25.471603 93.728792) (xy 26.320395 92.88)
(xy 26.306253 92.865858) (xy 26.485858 92.686253) (xy 26.5 92.700395) (xy 26.514143 92.686253) (xy 26.693748 92.865858)
(xy 26.679605 92.88) (xy 27.528397 93.728792) (xy 27.777472 93.651157) (xy 27.903371 93.387117) (xy 27.975339 93.103589)
(xy 27.990611 92.811469) (xy 27.948599 92.521981) (xy 27.850919 92.246253) (xy 27.787177 92.127) (xy 28.00603 92.127)
(xy 28.6855 92.705559) (xy 28.6855 92.734194) (xy 28.661756 92.746885) (xy 28.571201 92.821201) (xy 28.496885 92.911756)
(xy 28.441664 93.015068) (xy 28.407658 93.127169) (xy 28.396176 93.24375) (xy 28.396176 93.75625) (xy 28.407658 93.872831)
(xy 28.441664 93.984932) (xy 28.496885 94.088244) (xy 28.571201 94.178799) (xy 28.655665 94.248116) (xy 28.627095 94.317089)
(xy 28.608212 94.412021) (xy 28.53082 94.435498) (xy 28.420506 94.494463) (xy 28.323815 94.573815) (xy 28.244463 94.670506)
(xy 28.185498 94.78082) (xy 28.149188 94.900518) (xy 28.136928 95.025) (xy 28.14 95.21425) (xy 28.29875 95.373)
(xy 29.0855 95.373) (xy 29.0855 95.353) (xy 29.3395 95.353) (xy 29.3395 95.373) (xy 29.3595 95.373)
(xy 29.3595 95.627) (xy 29.3395 95.627) (xy 29.3395 96.45125) (xy 29.49825 96.61) (xy 29.65 96.613072)
(xy 29.774482 96.600812) (xy 29.89418 96.564502) (xy 30.004494 96.505537) (xy 30.101185 96.426185) (xy 30.180537 96.329494)
(xy 30.226057 96.244334) (xy 30.236756 96.253115) (xy 30.340068 96.308336) (xy 30.452169 96.342342) (xy 30.56875 96.353824)
(xy 31.00625 96.353824) (xy 31.122831 96.342342) (xy 31.234932 96.308336) (xy 31.338244 96.253115) (xy 31.428799 96.178799)
(xy 31.485306 96.109944) (xy 31.546927 96.202167) (xy 31.717833 96.373073) (xy 31.918798 96.507353) (xy 32.036798 96.556231)
(xy 31.868748 96.615843) (xy 31.618645 96.764822) (xy 31.402412 96.959731) (xy 31.228359 97.19308) (xy 31.103175 97.455901)
(xy 31.058524 97.60311) (xy 31.179845 97.833) (xy 32.373 97.833) (xy 32.373 97.813) (xy 32.627 97.813)
(xy 32.627 97.833) (xy 33.820155 97.833) (xy 33.940213 97.605503) (xy 38.34771 102.013) (xy 34.758291 102.013)
(xy 33.657395 100.912106) (xy 33.679847 100.857903) (xy 33.727 100.620849) (xy 33.727 100.379151) (xy 33.679847 100.142097)
(xy 33.587353 99.918798) (xy 33.453073 99.717833) (xy 33.282167 99.546927) (xy 33.081202 99.412647) (xy 32.963202 99.363769)
(xy 33.131252 99.304157) (xy 33.381355 99.155178) (xy 33.597588 98.960269) (xy 33.771641 98.72692) (xy 33.896825 98.464099)
(xy 33.941476 98.31689) (xy 33.820155 98.087) (xy 32.627 98.087) (xy 32.627 98.107) (xy 32.373 98.107)
(xy 32.373 98.087) (xy 31.179845 98.087) (xy 31.058524 98.31689) (xy 31.103175 98.464099) (xy 31.228359 98.72692)
(xy 31.402412 98.960269) (xy 31.618645 99.155178) (xy 31.868748 99.304157) (xy 32.036798 99.363769) (xy 31.918798 99.412647)
(xy 31.717833 99.546927) (xy 31.546927 99.717833) (xy 31.455841 99.854153) (xy 31.428799 99.821201) (xy 31.338244 99.746885)
(xy 31.234932 99.691664) (xy 31.122831 99.657658) (xy 31.00625 99.646176) (xy 30.56875 99.646176) (xy 30.452169 99.657658)
(xy 30.340068 99.691664) (xy 30.236756 99.746885) (xy 30.226057 99.755666) (xy 30.180537 99.670506) (xy 30.101185 99.573815)
(xy 30.004494 99.494463) (xy 29.89418 99.435498) (xy 29.774482 99.399188) (xy 29.65 99.386928) (xy 29.49825 99.39)
(xy 29.3395 99.54875) (xy 29.3395 100.373) (xy 29.3595 100.373) (xy 29.3595 100.627) (xy 29.3395 100.627)
(xy 29.3395 101.45125) (xy 29.49825 101.61) (xy 29.65 101.613072) (xy 29.774482 101.600812) (xy 29.89418 101.564502)
(xy 30.004494 101.505537) (xy 30.101185 101.426185) (xy 30.180537 101.329494) (xy 30.226057 101.244334) (xy 30.236756 101.253115)
(xy 30.260501 101.265807) (xy 30.2605 101.734193) (xy 30.236756 101.746885) (xy 30.146201 101.821201) (xy 30.071885 101.911756)
(xy 30.016664 102.015068) (xy 30 102.070001) (xy 29.983336 102.015068) (xy 29.928115 101.911756) (xy 29.853799 101.821201)
(xy 29.763244 101.746885) (xy 29.659932 101.691664) (xy 29.547831 101.657658) (xy 29.43125 101.646176) (xy 28.99375 101.646176)
(xy 28.877169 101.657658) (xy 28.765068 101.691664) (xy 28.661756 101.746885) (xy 28.571201 101.821201) (xy 28.496885 101.911756)
(xy 28.441664 102.015068) (xy 28.407658 102.127169) (xy 28.396176 102.24375) (xy 28.396176 102.75625) (xy 28.407658 102.872831)
(xy 28.441664 102.984932) (xy 28.496885 103.088244) (xy 28.571201 103.178799) (xy 28.661756 103.253115) (xy 28.685501 103.265807)
(xy 28.685501 103.296398) (xy 28.65436 103.343004) (xy 28.607095 103.457111) (xy 28.583 103.578246) (xy 28.583 103.701754)
(xy 28.607095 103.822889) (xy 28.65436 103.936996) (xy 28.722977 104.039689) (xy 28.810311 104.127023) (xy 28.913004 104.19564)
(xy 29.027111 104.242905) (xy 29.148246 104.267) (xy 29.271754 104.267) (xy 29.392889 104.242905) (xy 29.506996 104.19564)
(xy 29.609689 104.127023) (xy 29.697023 104.039689) (xy 29.76564 103.936996) (xy 29.812905 103.822889) (xy 29.837 103.701754)
(xy 29.837 103.578246) (xy 29.812905 103.457111) (xy 29.76564 103.343004) (xy 29.7395 103.303883) (xy 29.7395 103.265806)
(xy 29.763244 103.253115) (xy 29.853799 103.178799) (xy 29.928115 103.088244) (xy 29.983336 102.984932) (xy 30 102.929999)
(xy 30.016664 102.984932) (xy 30.071885 103.088244) (xy 30.146201 103.178799) (xy 30.236756 103.253115) (xy 30.340068 103.308336)
(xy 30.452169 103.342342) (xy 30.56875 103.353824) (xy 31.00625 103.353824) (xy 31.122831 103.342342) (xy 31.234932 103.308336)
(xy 31.338244 103.253115) (xy 31.428799 103.178799) (xy 31.503115 103.088244) (xy 31.558336 102.984932) (xy 31.592342 102.872831)
(xy 31.603824 102.75625) (xy 31.603824 102.24375) (xy 31.592342 102.127169) (xy 31.558336 102.015068) (xy 31.503115 101.911756)
(xy 31.428799 101.821201) (xy 31.338244 101.746885) (xy 31.3145 101.734194) (xy 31.3145 101.265806) (xy 31.338244 101.253115)
(xy 31.428799 101.178799) (xy 31.455841 101.145847) (xy 31.546927 101.282167) (xy 31.717833 101.453073) (xy 31.918798 101.587353)
(xy 32.142097 101.679847) (xy 32.379151 101.727) (xy 32.620849 101.727) (xy 32.857903 101.679847) (xy 32.912106 101.657395)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(xy 34.149054 102.894344) (xy 34.165552 102.914448) (xy 34.245798 102.980304) (xy 34.33735 103.029239) (xy 34.43669 103.059374)
(xy 34.54 103.069549) (xy 34.565881 103.067) (xy 46.123 103.067) (xy 46.123 108.5) (xy 46.130244 108.573549)
(xy 46.151697 108.644272) (xy 46.186536 108.70945) (xy 46.233421 108.766579) (xy 46.29055 108.813464) (xy 46.355728 108.848303)
(xy 46.426451 108.869756) (xy 46.5 108.877) (xy 53.5 108.877) (xy 53.573549 108.869756) (xy 53.644272 108.848303)
(xy 53.70945 108.813464) (xy 53.766579 108.766579) (xy 53.813464 108.70945) (xy 53.848303 108.644272) (xy 53.869756 108.573549)
(xy 53.877 108.5) (xy 53.877 106.5) (xy 53.869756 106.426451) (xy 53.848303 106.355728) (xy 53.813464 106.29055)
(xy 53.766579 106.233421) (xy 53.70945 106.186536) (xy 53.644272 106.151697) (xy 53.573549 106.130244) (xy 53.5 106.123)
(xy 52.156158 106.123) (xy 50.377 104.343842) (xy 50.377 103.682289) (xy 52.049054 105.354344) (xy 52.065552 105.374447)
(xy 52.092655 105.39669) (xy 52.145798 105.440303) (xy 52.23735 105.489239) (xy 52.33669 105.519373) (xy 52.439999 105.529549)
(xy 52.465887 105.526999) (xy 55.21212 105.527001) (xy 55.238001 105.52955) (xy 55.34131 105.519375) (xy 55.44065 105.48924)
(xy 55.532202 105.440305) (xy 55.532204 105.440303) (xy 55.612448 105.374449) (xy 55.628951 105.354341) (xy 55.691998 105.291293)
(xy 55.69436 105.296996) (xy 55.762977 105.399689) (xy 55.850311 105.487023) (xy 55.953004 105.55564) (xy 56.067111 105.602905)
(xy 56.188246 105.627) (xy 56.311754 105.627) (xy 56.432889 105.602905) (xy 56.546996 105.55564) (xy 56.649689 105.487023)
(xy 56.737023 105.399689) (xy 56.80564 105.296996) (xy 56.852905 105.182889) (xy 56.862962 105.132327) (xy 58.216172 103.779119)
(xy 58.296996 103.74564) (xy 58.399689 103.677023) (xy 58.487023 103.589689) (xy 58.55564 103.486996) (xy 58.602905 103.372889)
(xy 58.627 103.251754) (xy 58.627 103.128246) (xy 58.621363 103.099907) (xy 58.63918 103.094502) (xy 58.749494 103.035537)
(xy 58.846185 102.956185) (xy 58.925537 102.859494) (xy 58.984502 102.74918) (xy 59.020812 102.629482) (xy 59.033072 102.505)
(xy 59.03 102.31575) (xy 58.87125 102.157) (xy 58.0845 102.157) (xy 58.0845 102.177) (xy 57.8305 102.177)
(xy 57.8305 102.157) (xy 57.8105 102.157) (xy 57.8105 101.903) (xy 57.8305 101.903) (xy 57.8305 101.07875)
(xy 58.0845 101.07875) (xy 58.0845 101.903) (xy 58.87125 101.903) (xy 59.03 101.74425) (xy 59.033072 101.555)
(xy 59.020812 101.430518) (xy 58.984502 101.31082) (xy 58.925537 101.200506) (xy 58.846185 101.103815) (xy 58.749494 101.024463)
(xy 58.63918 100.965498) (xy 58.519482 100.929188) (xy 58.395 100.916928) (xy 58.24325 100.92) (xy 58.0845 101.07875)
(xy 57.8305 101.07875) (xy 57.67175 100.92) (xy 57.52 100.916928) (xy 57.395518 100.929188) (xy 57.27582 100.965498)
(xy 57.165506 101.024463) (xy 57.068815 101.103815) (xy 56.989463 101.200506) (xy 56.943943 101.285666) (xy 56.933244 101.276885)
(xy 56.829932 101.221664) (xy 56.717831 101.187658) (xy 56.60125 101.176176) (xy 56.16375 101.176176) (xy 56.047169 101.187658)
(xy 55.935068 101.221664) (xy 55.831756 101.276885) (xy 55.741201 101.351201) (xy 55.666885 101.441756) (xy 55.611664 101.545068)
(xy 55.577658 101.657169) (xy 55.566176 101.77375) (xy 55.566176 102.28625) (xy 55.577658 102.402831) (xy 55.611664 102.514932)
(xy 55.666885 102.618244) (xy 55.741201 102.708799) (xy 55.831756 102.783115) (xy 55.935068 102.838336) (xy 55.987322 102.854187)
(xy 56.008053 102.879448) (xy 56.028162 102.895951) (xy 56.676549 103.544339) (xy 56.693052 103.564448) (xy 56.773298 103.630304)
(xy 56.839188 103.665522) (xy 56.227 104.277711) (xy 56.227 104.089859) (xy 56.25564 104.046996) (xy 56.302905 103.932889)
(xy 56.327 103.811754) (xy 56.327 103.688246) (xy 56.302905 103.567111) (xy 56.25564 103.453004) (xy 56.187023 103.350311)
(xy 56.099689 103.262977) (xy 55.996996 103.19436) (xy 55.882889 103.147095) (xy 55.761754 103.123) (xy 55.638246 103.123)
(xy 55.517111 103.147095) (xy 55.403004 103.19436) (xy 55.356934 103.225143) (xy 55.347023 103.210311) (xy 55.259689 103.122977)
(xy 55.156996 103.05436) (xy 55.042889 103.007095) (xy 54.921754 102.983) (xy 54.798246 102.983) (xy 54.677111 103.007095)
(xy 54.563004 103.05436) (xy 54.460311 103.122977) (xy 54.372977 103.210311) (xy 54.30436 103.313004) (xy 54.257095 103.427111)
(xy 54.238259 103.521806) (xy 54.052066 103.708) (xy 52.88329 103.708) (xy 50.590955 101.415666) (xy 50.574448 101.395552)
(xy 50.494202 101.329696) (xy 50.40265 101.280761) (xy 50.30331 101.250626) (xy 50.225881 101.243) (xy 50.2 101.240451)
(xy 50.174119 101.243) (xy 39.06829 101.243) (xy 34.80029 96.975) (xy 43.136928 96.975) (xy 43.149188 97.099482)
(xy 43.185498 97.21918) (xy 43.244463 97.329494) (xy 43.323815 97.426185) (xy 43.420506 97.505537) (xy 43.53082 97.564502)
(xy 43.650518 97.600812) (xy 43.775 97.613072) (xy 43.92675 97.61) (xy 44.0855 97.45125) (xy 44.0855 96.627)
(xy 43.29875 96.627) (xy 43.14 96.78575) (xy 43.136928 96.975) (xy 34.80029 96.975) (xy 33.85029 96.025)
(xy 43.136928 96.025) (xy 43.14 96.21425) (xy 43.29875 96.373) (xy 44.0855 96.373) (xy 44.0855 95.54875)
(xy 44.3395 95.54875) (xy 44.3395 96.373) (xy 44.3595 96.373) (xy 44.3595 96.627) (xy 44.3395 96.627)
(xy 44.3395 97.45125) (xy 44.49825 97.61) (xy 44.65 97.613072) (xy 44.774482 97.600812) (xy 44.89418 97.564502)
(xy 45.004494 97.505537) (xy 45.101185 97.426185) (xy 45.180537 97.329494) (xy 45.226057 97.244334) (xy 45.236756 97.253115)
(xy 45.340068 97.308336) (xy 45.452169 97.342342) (xy 45.473 97.344394) (xy 45.473 97.660141) (xy 45.44436 97.703004)
(xy 45.397095 97.817111) (xy 45.373 97.938246) (xy 45.373 98.061754) (xy 45.397095 98.182889) (xy 45.44436 98.296996)
(xy 45.512977 98.399689) (xy 45.600311 98.487023) (xy 45.703004 98.55564) (xy 45.817111 98.602905) (xy 45.938246 98.627)
(xy 46.061754 98.627) (xy 46.182889 98.602905) (xy 46.296996 98.55564) (xy 46.399689 98.487023) (xy 46.487023 98.399689)
(xy 46.55564 98.296996) (xy 46.602905 98.182889) (xy 46.627 98.061754) (xy 46.627 97.938246) (xy 46.602905 97.817111)
(xy 46.55564 97.703004) (xy 46.527 97.660141) (xy 46.527 97.188246) (xy 46.623 97.188246) (xy 46.623 97.311754)
(xy 46.647095 97.432889) (xy 46.69436 97.546996) (xy 46.762977 97.649689) (xy 46.850311 97.737023) (xy 46.953004 97.80564)
(xy 47.067111 97.852905) (xy 47.117673 97.862962) (xy 48.293 99.03829) (xy 48.293001 99.41014) (xy 48.26436 99.453004)
(xy 48.217095 99.567111) (xy 48.193 99.688246) (xy 48.193 99.811754) (xy 48.217095 99.932889) (xy 48.26436 100.046996)
(xy 48.332977 100.149689) (xy 48.420311 100.237023) (xy 48.523004 100.30564) (xy 48.637111 100.352905) (xy 48.758246 100.377)
(xy 48.881754 100.377) (xy 49.002889 100.352905) (xy 49.116996 100.30564) (xy 49.219689 100.237023) (xy 49.307023 100.149689)
(xy 49.37564 100.046996) (xy 49.422905 99.932889) (xy 49.447 99.811754) (xy 49.447 99.688246) (xy 49.422905 99.567111)
(xy 49.37564 99.453004) (xy 49.347 99.410141) (xy 49.347 98.845877) (xy 49.349549 98.819999) (xy 49.345612 98.78003)
(xy 49.339374 98.71669) (xy 49.309239 98.61735) (xy 49.260304 98.525798) (xy 49.194448 98.445552) (xy 49.174339 98.429049)
(xy 48.89529 98.15) (xy 50.386928 98.15) (xy 50.399188 98.274482) (xy 50.435498 98.39418) (xy 50.494463 98.504494)
(xy 50.573815 98.601185) (xy 50.670506 98.680537) (xy 50.755666 98.726057) (xy 50.746885 98.736756) (xy 50.691664 98.840068)
(xy 50.657658 98.952169) (xy 50.646176 99.06875) (xy 50.646176 99.50625) (xy 50.657658 99.622831) (xy 50.691664 99.734932)
(xy 50.746885 99.838244) (xy 50.821201 99.928799) (xy 50.911756 100.003115) (xy 51.015068 100.058336) (xy 51.127169 100.092342)
(xy 51.24375 100.103824) (xy 51.75625 100.103824) (xy 51.872831 100.092342) (xy 51.984932 100.058336) (xy 52.088244 100.003115)
(xy 52.178799 99.928799) (xy 52.25 99.84204) (xy 52.321201 99.928799) (xy 52.373 99.971309) (xy 52.373 100.06181)
(xy 52.397095 100.182945) (xy 52.44436 100.297052) (xy 52.512977 100.399745) (xy 52.600311 100.487079) (xy 52.703004 100.555696)
(xy 52.817111 100.602961) (xy 52.938246 100.627056) (xy 53.061754 100.627056) (xy 53.182889 100.602961) (xy 53.296996 100.555696)
(xy 53.399689 100.487079) (xy 53.487023 100.399745) (xy 53.55564 100.297052) (xy 53.602905 100.182945) (xy 53.627 100.06181)
(xy 53.627 99.971309) (xy 53.678799 99.928799) (xy 53.753115 99.838244) (xy 53.765806 99.8145) (xy 53.984194 99.8145)
(xy 53.996885 99.838244) (xy 54.071201 99.928799) (xy 54.161756 100.003115) (xy 54.265068 100.058336) (xy 54.377169 100.092342)
(xy 54.49375 100.103824) (xy 55.00625 100.103824) (xy 55.122831 100.092342) (xy 55.234932 100.058336) (xy 55.338244 100.003115)
(xy 55.428799 99.928799) (xy 55.503115 99.838244) (xy 55.558336 99.734932) (xy 55.592342 99.622831) (xy 55.603824 99.50625)
(xy 55.603824 99.06875) (xy 55.592342 98.952169) (xy 55.558336 98.840068) (xy 55.503115 98.736756) (xy 55.494334 98.726057)
(xy 55.579494 98.680537) (xy 55.676185 98.601185) (xy 55.755537 98.504494) (xy 55.814502 98.39418) (xy 55.850812 98.274482)
(xy 55.863072 98.15) (xy 55.86 97.99825) (xy 55.70125 97.8395) (xy 54.877 97.8395) (xy 54.877 97.8595)
(xy 54.623 97.8595) (xy 54.623 97.8395) (xy 54.603 97.8395) (xy 54.603 97.5855) (xy 54.623 97.5855)
(xy 54.623 97.5655) (xy 54.877 97.5655) (xy 54.877 97.5855) (xy 55.70125 97.5855) (xy 55.86 97.42675)
(xy 55.863072 97.275) (xy 55.850812 97.150518) (xy 55.814502 97.03082) (xy 55.755537 96.920506) (xy 55.676185 96.823815)
(xy 55.579494 96.744463) (xy 55.46918 96.685498) (xy 55.349482 96.649188) (xy 55.225 96.636928) (xy 55.03575 96.64)
(xy 54.877002 96.798748) (xy 54.877002 96.64) (xy 54.817422 96.64) (xy 55.110422 96.347) (xy 59.049578 96.347)
(xy 59.324802 96.622223) (xy 59.402059 96.685628) (xy 59.51967 96.748491) (xy 59.647285 96.787203) (xy 59.779999 96.800274)
(xy 59.912714 96.787203) (xy 60.040329 96.748491) (xy 60.15794 96.685628) (xy 60.261026 96.601026) (xy 60.345628 96.49794)
(xy 60.408491 96.380329) (xy 60.447203 96.252714) (xy 60.460274 96.119999) (xy 60.447203 95.987285) (xy 60.408491 95.85967)
(xy 60.345628 95.742059) (xy 60.282223 95.664802) (xy 59.832227 95.214805) (xy 59.811027 95.188973) (xy 59.707941 95.104372)
(xy 59.59033 95.041508) (xy 59.462715 95.002796) (xy 59.363252 94.993) (xy 59.363245 94.993) (xy 59.33 94.989726)
(xy 59.296755 94.993) (xy 57.387 94.993) (xy 57.387 91.619001) (xy 57.886717 91.119285) (xy 57.873 91.188246)
(xy 57.873 91.311754) (xy 57.897095 91.432889) (xy 57.94436 91.546996) (xy 58.012977 91.649689) (xy 58.100311 91.737023)
(xy 58.203004 91.80564) (xy 58.317111 91.852905) (xy 58.367673 91.862962) (xy 60.509736 94.005027) (xy 60.48436 94.043004)
(xy 60.437095 94.157111) (xy 60.413 94.278246) (xy 60.413 94.401754) (xy 60.437095 94.522889) (xy 60.48436 94.636996)
(xy 60.552977 94.739689) (xy 60.640311 94.827023) (xy 60.743004 94.89564) (xy 60.857111 94.942905) (xy 60.978246 94.967)
(xy 61.101754 94.967) (xy 61.222889 94.942905) (xy 61.336996 94.89564) (xy 61.365983 94.876272) (xy 62.973001 96.483291)
(xy 62.973 107.657419) (xy 62.970451 107.6833) (xy 62.973 107.70918) (xy 62.980626 107.786609) (xy 63.010761 107.885949)
(xy 63.059696 107.977502) (xy 63.125552 108.057748) (xy 63.145666 108.074255) (xy 64.675749 109.604339) (xy 64.692252 109.624448)
(xy 64.772498 109.690304) (xy 64.86405 109.739239) (xy 64.96339 109.769374) (xy 65.040819 109.777) (xy 65.040821 109.777)
(xy 65.066699 109.779549) (xy 65.092577 109.777) (xy 83.830719 109.777) (xy 83.8566 109.779549) (xy 83.882481 109.777)
(xy 83.95991 109.769374) (xy 84.05925 109.739239) (xy 84.150802 109.690304) (xy 84.231048 109.624448) (xy 84.247555 109.604334)
(xy 85.071239 108.780651) (xy 85.091348 108.764148) (xy 85.157204 108.683902) (xy 85.206139 108.59235) (xy 85.236274 108.49301)
(xy 85.2439 108.415581) (xy 85.246449 108.3897) (xy 85.2439 108.363819) (xy 85.2439 104.080981) (xy 85.246449 104.0551)
(xy 85.2395 103.984545) (xy 85.2395 98.765806) (xy 85.263244 98.753115) (xy 85.353799 98.678799) (xy 85.428115 98.588244)
(xy 85.483336 98.484932) (xy 85.5 98.429999) (xy 85.516664 98.484932) (xy 85.571885 98.588244) (xy 85.646201 98.678799)
(xy 85.736756 98.753115) (xy 85.840068 98.808336) (xy 85.952169 98.842342) (xy 86.06875 98.853824) (xy 86.50625 98.853824)
(xy 86.622831 98.842342) (xy 86.734932 98.808336) (xy 86.838244 98.753115) (xy 86.928799 98.678799) (xy 87.003115 98.588244)
(xy 87.058336 98.484932) (xy 87.092342 98.372831) (xy 87.103824 98.25625) (xy 87.103824 97.74375) (xy 87.092342 97.627169)
(xy 87.058336 97.515068) (xy 87.003115 97.411756) (xy 86.928799 97.321201) (xy 86.838244 97.246885) (xy 86.8145 97.234194)
(xy 86.8145 96.765806) (xy 86.838244 96.753115) (xy 86.928799 96.678799) (xy 87.003115 96.588244) (xy 87.058336 96.484932)
(xy 87.092342 96.372831) (xy 87.103824 96.25625) (xy 87.103824 95.74375) (xy 87.092342 95.627169) (xy 87.058336 95.515068)
(xy 87.003115 95.411756) (xy 86.928799 95.321201) (xy 86.838244 95.246885) (xy 86.734932 95.191664) (xy 86.622831 95.157658)
(xy 86.527 95.14822) (xy 86.527 94.720606) (xy 86.59497 94.699988) (xy 86.660463 94.664981) (xy 86.717869 94.617869)
(xy 86.764981 94.560463) (xy 86.799988 94.49497) (xy 86.821545 94.423905) (xy 86.828824 94.35) (xy 86.828824 93.55)
(xy 86.821545 93.476095) (xy 86.799988 93.40503) (xy 86.764981 93.339537) (xy 86.717869 93.282131) (xy 86.660463 93.235019)
(xy 86.59497 93.200012) (xy 86.523905 93.178455) (xy 86.45 93.171176) (xy 85.55 93.171176) (xy 85.476095 93.178455)
(xy 85.40503 93.200012) (xy 85.339537 93.235019) (xy 85.282131 93.282131) (xy 85.235019 93.339537) (xy 85.200012 93.40503)
(xy 85.178455 93.476095) (xy 85.171176 93.55) (xy 85.171176 94.35) (xy 85.178455 94.423905) (xy 85.200012 94.49497)
(xy 85.235019 94.560463) (xy 85.282131 94.617869) (xy 85.339537 94.664981) (xy 85.40503 94.699988) (xy 85.473 94.720606)
(xy 85.473001 95.495732) (xy 85.428115 95.411756) (xy 85.353799 95.321201) (xy 85.263244 95.246885) (xy 85.159932 95.191664)
(xy 85.047831 95.157658) (xy 84.93125 95.146176) (xy 84.49375 95.146176) (xy 84.377169 95.157658) (xy 84.265068 95.191664)
(xy 84.161756 95.246885) (xy 84.071201 95.321201) (xy 83.996885 95.411756) (xy 83.941664 95.515068) (xy 83.907658 95.627169)
(xy 83.896176 95.74375) (xy 83.896176 96.25625) (xy 83.907658 96.372831) (xy 83.941664 96.484932) (xy 83.996885 96.588244)
(xy 84.071201 96.678799) (xy 84.161756 96.753115) (xy 84.185501 96.765807) (xy 84.1855 97.234193) (xy 84.161756 97.246885)
(xy 84.071201 97.321201) (xy 83.996885 97.411756) (xy 83.941664 97.515068) (xy 83.907658 97.627169) (xy 83.896176 97.74375)
(xy 83.896176 98.25625) (xy 83.907658 98.372831) (xy 83.941664 98.484932) (xy 83.996885 98.588244) (xy 84.071201 98.678799)
(xy 84.161756 98.753115) (xy 84.1855 98.765806) (xy 84.185501 104.024809) (xy 84.182951 104.0507) (xy 84.1899 104.121255)
(xy 84.189901 108.171409) (xy 83.638311 108.723) (xy 65.28499 108.723) (xy 64.027 107.465011) (xy 64.027 96.29088)
(xy 64.029549 96.264999) (xy 64.019374 96.16169) (xy 64.006151 96.118099) (xy 64.123 96.00125) (xy 64.123 95.127)
(xy 64.377 95.127) (xy 64.377 96.00125) (xy 64.53575 96.16) (xy 65 96.163072) (xy 65.124482 96.150812)
(xy 65.24418 96.114502) (xy 65.354494 96.055537) (xy 65.451185 95.976185) (xy 65.530537 95.879494) (xy 65.589502 95.76918)
(xy 65.625812 95.649482) (xy 65.638072 95.525) (xy 65.635 95.28575) (xy 65.47625 95.127) (xy 64.377 95.127)
(xy 64.123 95.127) (xy 64.103 95.127) (xy 64.103 94.873) (xy 64.123 94.873) (xy 64.123 94.853)
(xy 64.377 94.853) (xy 64.377 94.873) (xy 65.47625 94.873) (xy 65.635 94.71425) (xy 65.638072 94.475)
(xy 65.625812 94.350518) (xy 65.597444 94.257) (xy 65.70346 94.257) (xy 65.746885 94.338244) (xy 65.821201 94.428799)
(xy 65.911756 94.503115) (xy 66.015068 94.558336) (xy 66.127169 94.592342) (xy 66.24375 94.603824) (xy 66.75625 94.603824)
(xy 66.872831 94.592342) (xy 66.984932 94.558336) (xy 67.088244 94.503115) (xy 67.178799 94.428799) (xy 67.253115 94.338244)
(xy 67.308336 94.234932) (xy 67.342342 94.122831) (xy 67.353824 94.00625) (xy 67.353824 93.56875) (xy 67.342342 93.452169)
(xy 67.308336 93.340068) (xy 67.253115 93.236756) (xy 67.178799 93.146201) (xy 67.088244 93.071885) (xy 66.984932 93.016664)
(xy 66.929999 93) (xy 66.984932 92.983336) (xy 67.088244 92.928115) (xy 67.178799 92.853799) (xy 67.253115 92.763244)
Move vias to better locations: These vias have proven unfortunately placed for hand soldering
2020-02-05 22:12:31 +01:00
(xy 67.308336 92.659932) (xy 67.342342 92.547831) (xy 67.351977 92.45) (xy 84.911928 92.45) (xy 84.924188 92.574482)
(xy 84.960498 92.69418) (xy 85.019463 92.804494) (xy 85.098815 92.901185) (xy 85.195506 92.980537) (xy 85.30582 93.039502)
(xy 85.425518 93.075812) (xy 85.55 93.088072) (xy 85.71425 93.085) (xy 85.873 92.92625) (xy 85.873 92.177)
(xy 86.127 92.177) (xy 86.127 92.92625) (xy 86.28575 93.085) (xy 86.45 93.088072) (xy 86.574482 93.075812)
(xy 86.69418 93.039502) (xy 86.804494 92.980537) (xy 86.901185 92.901185) (xy 86.980537 92.804494) (xy 87.039502 92.69418)
(xy 87.075812 92.574482) (xy 87.088072 92.45) (xy 87.085 92.33575) (xy 86.92625 92.177) (xy 86.127 92.177)
(xy 85.873 92.177) (xy 85.07375 92.177) (xy 84.915 92.33575) (xy 84.911928 92.45) (xy 67.351977 92.45)
(xy 67.353824 92.43125) (xy 67.353824 91.99375) (xy 67.342342 91.877169) (xy 67.308336 91.765068) (xy 67.253115 91.661756)
(xy 67.178799 91.571201) (xy 67.088244 91.496885) (xy 66.984932 91.441664) (xy 66.973665 91.438246) (xy 76.373 91.438246)
(xy 76.373 91.561754) (xy 76.397095 91.682889) (xy 76.44436 91.796996) (xy 76.512977 91.899689) (xy 76.600311 91.987023)
(xy 76.703004 92.05564) (xy 76.817111 92.102905) (xy 76.938246 92.127) (xy 77.061754 92.127) (xy 77.182889 92.102905)
(xy 77.296996 92.05564) (xy 77.339859 92.027) (xy 79.910135 92.027) (xy 79.952998 92.05564) (xy 80.067105 92.102905)
(xy 80.18824 92.127) (xy 80.311748 92.127) (xy 80.432883 92.102905) (xy 80.54699 92.05564) (xy 80.649683 91.987023)
(xy 80.737017 91.899689) (xy 80.805634 91.796996) (xy 80.852899 91.682889) (xy 80.85944 91.65) (xy 84.911928 91.65)
(xy 84.915 91.76425) (xy 85.07375 91.923) (xy 85.873 91.923) (xy 85.873 91.17375) (xy 86.127 91.17375)
(xy 86.127 91.923) (xy 86.92625 91.923) (xy 87.085 91.76425) (xy 87.088072 91.65) (xy 87.075812 91.525518)
(xy 87.039502 91.40582) (xy 86.980537 91.295506) (xy 86.901185 91.198815) (xy 86.804494 91.119463) (xy 86.69418 91.060498)
(xy 86.574482 91.024188) (xy 86.45 91.011928) (xy 86.28575 91.015) (xy 86.127 91.17375) (xy 85.873 91.17375)
(xy 85.71425 91.015) (xy 85.55 91.011928) (xy 85.425518 91.024188) (xy 85.30582 91.060498) (xy 85.195506 91.119463)
(xy 85.098815 91.198815) (xy 85.019463 91.295506) (xy 84.960498 91.40582) (xy 84.924188 91.525518) (xy 84.911928 91.65)
(xy 80.85944 91.65) (xy 80.876994 91.561754) (xy 80.876994 91.438246) (xy 80.852899 91.317111) (xy 80.805634 91.203004)
(xy 80.737017 91.100311) (xy 80.649683 91.012977) (xy 80.54699 90.94436) (xy 80.432883 90.897095) (xy 80.311748 90.873)
(xy 80.18824 90.873) (xy 80.067105 90.897095) (xy 79.952998 90.94436) (xy 79.910135 90.973) (xy 77.339859 90.973)
(xy 77.296996 90.94436) (xy 77.182889 90.897095) (xy 77.061754 90.873) (xy 76.938246 90.873) (xy 76.817111 90.897095)
(xy 76.703004 90.94436) (xy 76.600311 91.012977) (xy 76.512977 91.100311) (xy 76.44436 91.203004) (xy 76.397095 91.317111)
(xy 76.373 91.438246) (xy 66.973665 91.438246) (xy 66.872831 91.407658) (xy 66.75625 91.396176) (xy 66.24375 91.396176)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(xy 66.127169 91.407658) (xy 66.015068 91.441664) (xy 65.911756 91.496885) (xy 65.821201 91.571201) (xy 65.746885 91.661756)
(xy 65.734194 91.6855) (xy 64.939474 91.6855) (xy 64.82185 91.622629) (xy 64.651823 91.571052) (xy 64.519307 91.558)
(xy 63.980693 91.558) (xy 63.848177 91.571052) (xy 63.67815 91.622629) (xy 63.521451 91.706386) (xy 63.384104 91.819104)
(xy 63.271386 91.956451) (xy 63.269222 91.9605) (xy 63.023438 91.9605) (xy 63.079494 91.930537) (xy 63.176185 91.851185)
(xy 63.255537 91.754494) (xy 63.314502 91.64418) (xy 63.350812 91.524482) (xy 63.363072 91.4) (xy 63.36 91.24825)
(xy 63.20125 91.0895) (xy 62.377 91.0895) (xy 62.377 91.1095) (xy 62.123 91.1095) (xy 62.123 91.0895)
(xy 61.29875 91.0895) (xy 61.220876 91.167375) (xy 60.578501 90.525) (xy 61.136928 90.525) (xy 61.14 90.67675)
(xy 61.29875 90.8355) (xy 62.123 90.8355) (xy 62.123 90.04875) (xy 62.377 90.04875) (xy 62.377 90.8355)
(xy 63.20125 90.8355) (xy 63.36 90.67675) (xy 63.363072 90.525) (xy 63.350812 90.400518) (xy 63.314502 90.28082)
(xy 63.255537 90.170506) (xy 63.176185 90.073815) (xy 63.079494 89.994463) (xy 62.96918 89.935498) (xy 62.849482 89.899188)
(xy 62.725 89.886928) (xy 62.53575 89.89) (xy 62.377 90.04875) (xy 62.123 90.04875) (xy 61.96425 89.89)
(xy 61.775 89.886928) (xy 61.650518 89.899188) (xy 61.53082 89.935498) (xy 61.420506 89.994463) (xy 61.323815 90.073815)
(xy 61.244463 90.170506) (xy 61.185498 90.28082) (xy 61.149188 90.400518) (xy 61.136928 90.525) (xy 60.578501 90.525)
(xy 60.075539 90.022038) (xy 60.057474 90.000026) (xy 59.969615 89.927921) (xy 59.869376 89.874343) (xy 59.80527 89.854897)
(xy 59.760611 89.841349) (xy 59.701959 89.835573) (xy 59.675836 89.833) (xy 59.675831 89.833) (xy 59.6475 89.83021)
(xy 59.619169 89.833) (xy 57.808328 89.833) (xy 57.779999 89.83021) (xy 57.75167 89.833) (xy 57.751664 89.833)
(xy 57.666888 89.84135) (xy 57.558124 89.874343) (xy 57.457885 89.927921) (xy 57.412032 89.965552) (xy 57.392035 89.981963)
(xy 57.392033 89.981965) (xy 57.370026 90.000026) (xy 57.351965 90.022033) (xy 56.422033 90.951966) (xy 56.400027 90.970026)
Move vias to better locations: These vias have proven unfortunately placed for hand soldering
2020-02-05 22:12:31 +01:00
(xy 56.381966 90.992033) (xy 56.381963 90.992036) (xy 56.363117 91.015) (xy 56.327922 91.057885) (xy 56.281193 91.145311)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(xy 56.274344 91.158124) (xy 56.241349 91.266889) (xy 56.23021 91.38) (xy 56.233001 91.408341) (xy 56.233 94.993)
(xy 54.863241 94.993) (xy 54.829999 94.989726) (xy 54.796757 94.993) (xy 54.796748 94.993) (xy 54.697285 95.002796)
(xy 54.56967 95.041508) (xy 54.452059 95.104372) (xy 54.348973 95.188973) (xy 54.327774 95.214804) (xy 53.527 96.015578)
(xy 53.527 95.661287) (xy 53.542905 95.622889) (xy 53.567 95.501754) (xy 53.567 95.378246) (xy 53.542905 95.257111)
(xy 53.49564 95.143004) (xy 53.427023 95.040311) (xy 53.339689 94.952977) (xy 53.236996 94.88436) (xy 53.122889 94.837095)
(xy 53.001754 94.813) (xy 52.878246 94.813) (xy 52.757111 94.837095) (xy 52.643004 94.88436) (xy 52.540311 94.952977)
(xy 52.452977 95.040311) (xy 52.38436 95.143004) (xy 52.337095 95.257111) (xy 52.313 95.378246) (xy 52.313 95.501754)
(xy 52.337095 95.622889) (xy 52.38436 95.736996) (xy 52.452977 95.839689) (xy 52.473001 95.859713) (xy 52.473 96.88086)
(xy 52.426185 96.823815) (xy 52.329494 96.744463) (xy 52.21918 96.685498) (xy 52.099482 96.649188) (xy 51.975 96.636928)
(xy 51.78575 96.64) (xy 51.627 96.79875) (xy 51.627 97.5855) (xy 51.647 97.5855) (xy 51.647 97.8395)
(xy 51.627 97.8395) (xy 51.627 97.8595) (xy 51.373 97.8595) (xy 51.373 97.8395) (xy 50.54875 97.8395)
(xy 50.39 97.99825) (xy 50.386928 98.15) (xy 48.89529 98.15) (xy 48.02029 97.275) (xy 50.386928 97.275)
(xy 50.39 97.42675) (xy 50.54875 97.5855) (xy 51.373 97.5855) (xy 51.373 96.79875) (xy 51.21425 96.64)
(xy 51.025 96.636928) (xy 50.900518 96.649188) (xy 50.78082 96.685498) (xy 50.670506 96.744463) (xy 50.573815 96.823815)
(xy 50.494463 96.920506) (xy 50.435498 97.03082) (xy 50.399188 97.150518) (xy 50.386928 97.275) (xy 48.02029 97.275)
(xy 47.862962 97.117673) (xy 47.852905 97.067111) (xy 47.80564 96.953004) (xy 47.737023 96.850311) (xy 47.649689 96.762977)
(xy 47.546996 96.69436) (xy 47.432889 96.647095) (xy 47.311754 96.623) (xy 47.188246 96.623) (xy 47.067111 96.647095)
(xy 46.953004 96.69436) (xy 46.850311 96.762977) (xy 46.762977 96.850311) (xy 46.69436 96.953004) (xy 46.647095 97.067111)
(xy 46.623 97.188246) (xy 46.527 97.188246) (xy 46.527 97.043558) (xy 46.558336 96.984932) (xy 46.592342 96.872831)
(xy 46.603824 96.75625) (xy 46.603824 96.24375) (xy 46.592342 96.127169) (xy 46.558336 96.015068) (xy 46.503115 95.911756)
(xy 46.428799 95.821201) (xy 46.338244 95.746885) (xy 46.234932 95.691664) (xy 46.122831 95.657658) (xy 46.00625 95.646176)
(xy 45.56875 95.646176) (xy 45.452169 95.657658) (xy 45.340068 95.691664) (xy 45.236756 95.746885) (xy 45.226057 95.755666)
(xy 45.180537 95.670506) (xy 45.101185 95.573815) (xy 45.004494 95.494463) (xy 44.89418 95.435498) (xy 44.774482 95.399188)
(xy 44.65 95.386928) (xy 44.49825 95.39) (xy 44.3395 95.54875) (xy 44.0855 95.54875) (xy 43.92675 95.39)
(xy 43.775 95.386928) (xy 43.650518 95.399188) (xy 43.53082 95.435498) (xy 43.420506 95.494463) (xy 43.323815 95.573815)
(xy 43.244463 95.670506) (xy 43.185498 95.78082) (xy 43.149188 95.900518) (xy 43.136928 96.025) (xy 33.85029 96.025)
(xy 33.657395 95.832106) (xy 33.679847 95.777903) (xy 33.727 95.540849) (xy 33.727 95.299151) (xy 33.679847 95.062097)
(xy 33.587353 94.838798) (xy 33.453073 94.637833) (xy 33.282167 94.466927) (xy 33.081202 94.332647) (xy 32.857903 94.240153)
(xy 32.620849 94.193) (xy 32.379151 94.193) (xy 32.142097 94.240153) (xy 31.918798 94.332647) (xy 31.717833 94.466927)
(xy 31.546927 94.637833) (xy 31.425961 94.818872) (xy 31.338244 94.746885) (xy 31.3145 94.734194) (xy 31.3145 94.265806)
(xy 31.338244 94.253115) (xy 31.428799 94.178799) (xy 31.503115 94.088244) (xy 31.558336 93.984932) (xy 31.592342 93.872831)
(xy 31.603824 93.75625) (xy 31.603824 93.719064) (xy 31.717833 93.833073) (xy 31.918798 93.967353) (xy 32.142097 94.059847)
(xy 32.379151 94.107) (xy 32.620849 94.107) (xy 32.857903 94.059847) (xy 33.081202 93.967353) (xy 33.282167 93.833073)
(xy 33.453073 93.662167) (xy 33.543388 93.527) (xy 33.96415 93.527) (xy 33.996885 93.588244) (xy 34.071201 93.678799)
(xy 34.161756 93.753115) (xy 34.265068 93.808336) (xy 34.377169 93.842342) (xy 34.49375 93.853824) (xy 34.93125 93.853824)
(xy 35.047831 93.842342) (xy 35.159932 93.808336) (xy 35.263244 93.753115) (xy 35.273943 93.744334) (xy 35.319463 93.829494)
(xy 35.398815 93.926185) (xy 35.495506 94.005537) (xy 35.60582 94.064502) (xy 35.725518 94.100812) (xy 35.85 94.113072)
(xy 36.00175 94.11) (xy 36.1605 93.95125) (xy 36.1605 93.127) (xy 36.4145 93.127) (xy 36.4145 93.95125)
(xy 36.57325 94.11) (xy 36.725 94.113072) (xy 36.849482 94.100812) (xy 36.96918 94.064502) (xy 37.079494 94.005537)
(xy 37.176185 93.926185) (xy 37.255537 93.829494) (xy 37.314502 93.71918) (xy 37.350812 93.599482) (xy 37.363072 93.475)
(xy 37.36 93.28575) (xy 37.20125 93.127) (xy 36.4145 93.127) (xy 36.1605 93.127) (xy 36.1405 93.127)
(xy 36.1405 92.873) (xy 36.1605 92.873) (xy 36.1605 92.04875) (xy 36.4145 92.04875) (xy 36.4145 92.873)
(xy 37.20125 92.873) (xy 37.36 92.71425) (xy 37.363072 92.525) (xy 37.350812 92.400518) (xy 37.314502 92.28082)
(xy 37.255537 92.170506) (xy 37.176185 92.073815) (xy 37.079494 91.994463) (xy 36.96918 91.935498) (xy 36.849482 91.899188)
(xy 36.725 91.886928) (xy 36.57325 91.89) (xy 36.4145 92.04875) (xy 36.1605 92.04875) (xy 36.00175 91.89)
(xy 35.85 91.886928) (xy 35.725518 91.899188) (xy 35.60582 91.935498) (xy 35.495506 91.994463) (xy 35.398815 92.073815)
(xy 35.319463 92.170506) (xy 35.273943 92.255666) (xy 35.263244 92.246885) (xy 35.159932 92.191664) (xy 35.047831 92.157658)
(xy 34.93125 92.146176) (xy 34.49375 92.146176) (xy 34.377169 92.157658) (xy 34.265068 92.191664) (xy 34.161756 92.246885)
(xy 34.071201 92.321201) (xy 33.996885 92.411756) (xy 33.96415 92.473) (xy 33.65951 92.473) (xy 33.587353 92.298798)
(xy 33.453073 92.097833) (xy 33.282167 91.926927) (xy 33.132447 91.826888) (xy 33.35 91.828072) (xy 33.474482 91.815812)
(xy 33.59418 91.779502) (xy 33.704494 91.720537) (xy 33.801185 91.641185) (xy 33.880537 91.544494) (xy 33.939502 91.43418)
(xy 33.975812 91.314482) (xy 33.988072 91.19) (xy 33.985 90.62575) (xy 33.82625 90.467) (xy 32.627 90.467)
(xy 32.627 90.487) (xy 32.373 90.487) (xy 32.373 90.467) (xy 31.17375 90.467) (xy 31.015 90.62575)
(xy 31.011928 91.19) (xy 31.024188 91.314482) (xy 31.060498 91.43418) (xy 31.119463 91.544494) (xy 31.198815 91.641185)
(xy 31.295506 91.720537) (xy 31.40582 91.779502) (xy 31.525518 91.815812) (xy 31.65 91.828072) (xy 31.867553 91.826888)
(xy 31.717833 91.926927) (xy 31.546927 92.097833) (xy 31.412647 92.298798) (xy 31.320153 92.522097) (xy 31.281475 92.716542)
(xy 31.234932 92.691664) (xy 31.122831 92.657658) (xy 31.00625 92.646176) (xy 30.56875 92.646176) (xy 30.452169 92.657658)
(xy 30.340068 92.691664) (xy 30.236756 92.746885) (xy 30.146201 92.821201) (xy 30.071885 92.911756) (xy 30.016664 93.015068)
(xy 30 93.070001) (xy 29.983336 93.015068) (xy 29.928115 92.911756) (xy 29.853799 92.821201) (xy 29.763244 92.746885)
(xy 29.757 92.743548) (xy 29.757 92.505877) (xy 29.759549 92.479999) (xy 29.754885 92.432649) (xy 29.749374 92.37669)
(xy 29.719239 92.27735) (xy 29.670304 92.185798) (xy 29.604448 92.105552) (xy 29.591099 92.094597) (xy 29.57826 92.079465)
(xy 29.544736 92.05286) (xy 28.577506 91.229278) (xy 28.574448 91.225552) (xy 28.538016 91.195653) (xy 28.521951 91.181974)
(xy 28.518021 91.179244) (xy 28.494202 91.159696) (xy 28.475478 91.149688) (xy 28.458054 91.137583) (xy 28.429822 91.125284)
(xy 28.40265 91.110761) (xy 28.382337 91.104599) (xy 28.362882 91.096124) (xy 28.332792 91.089569) (xy 28.30331 91.080626)
(xy 28.282184 91.078545) (xy 28.261451 91.074029) (xy 28.23066 91.073471) (xy 28.225881 91.073) (xy 28.204702 91.073)
(xy 28.157659 91.072147) (xy 28.152924 91.073) (xy 27.795666 91.073) (xy 27.903371 90.847117) (xy 27.975339 90.563589)
(xy 27.990611 90.271469) (xy 27.948599 89.981981) (xy 27.850919 89.706253) (xy 27.777472 89.568843) (xy 27.528397 89.491208)
(xy 26.679605 90.34) (xy 26.693748 90.354143) (xy 26.514143 90.533748) (xy 26.5 90.519605) (xy 26.485858 90.533748)
(xy 26.306253 90.354143) (xy 26.320395 90.34) (xy 25.471603 89.491208) (xy 25.222528 89.568843) (xy 25.096629 89.832883)
(xy 25.089566 89.860709) (xy 25.047353 89.758798) (xy 24.913073 89.557833) (xy 24.742167 89.386927) (xy 24.637 89.316657)
(xy 24.637 88.847004) (xy 24.70625 88.853824) (xy 25.14375 88.853824) (xy 25.260331 88.842342) (xy 25.372432 88.808336)
(xy 25.475744 88.753115) (xy 25.486443 88.744334) (xy 25.531963 88.829494) (xy 25.611315 88.926185) (xy 25.708006 89.005537)
(xy 25.771735 89.039602) (xy 25.728843 89.062528) (xy 25.651208 89.311603) (xy 26.5 90.160395) (xy 27.170395 89.49)
(xy 31.011928 89.49) (xy 31.015 90.05425) (xy 31.17375 90.213) (xy 32.373 90.213) (xy 32.373 89.01375)
(xy 32.627 89.01375) (xy 32.627 90.213) (xy 33.82625 90.213) (xy 33.985 90.05425) (xy 33.988072 89.49)
(xy 33.975812 89.365518) (xy 33.939502 89.24582) (xy 33.880537 89.135506) (xy 33.801185 89.038815) (xy 33.704494 88.959463)
(xy 33.59418 88.900498) (xy 33.474482 88.864188) (xy 33.35 88.851928) (xy 32.78575 88.855) (xy 32.627 89.01375)
(xy 32.373 89.01375) (xy 32.21425 88.855) (xy 31.65 88.851928) (xy 31.525518 88.864188) (xy 31.40582 88.900498)
(xy 31.295506 88.959463) (xy 31.198815 89.038815) (xy 31.119463 89.135506) (xy 31.060498 89.24582) (xy 31.024188 89.365518)
(xy 31.011928 89.49) (xy 27.170395 89.49) (xy 27.348792 89.311603) (xy 27.271157 89.062528) (xy 27.225818 89.040909)
(xy 27.291994 89.005537) (xy 27.388685 88.926185) (xy 27.468037 88.829494) (xy 27.527002 88.71918) (xy 27.563312 88.599482)
(xy 27.575572 88.475) (xy 27.5725 88.28575) (xy 27.41375 88.127) (xy 26.627 88.127) (xy 26.627 88.147)
(xy 26.373 88.147) (xy 26.373 88.127) (xy 26.353 88.127) (xy 26.353 87.873) (xy 26.373 87.873)
(xy 26.373 87.04875) (xy 26.627 87.04875) (xy 26.627 87.873) (xy 27.41375 87.873) (xy 27.5725 87.71425)
(xy 27.575572 87.525) (xy 27.563312 87.400518) (xy 27.527002 87.28082) (xy 27.468037 87.170506) (xy 27.388685 87.073815)
(xy 27.291994 86.994463) (xy 27.18168 86.935498) (xy 27.061982 86.899188) (xy 26.9375 86.886928) (xy 26.78575 86.89)
(xy 26.627 87.04875) (xy 26.373 87.04875) (xy 26.21425 86.89) (xy 26.0625 86.886928) (xy 25.938018 86.899188)
(xy 25.81832 86.935498) (xy 25.708006 86.994463) (xy 25.611315 87.073815) (xy 25.531963 87.170506) (xy 25.486443 87.255666)
(xy 25.475744 87.246885) (xy 25.372432 87.191664) (xy 25.260331 87.157658) (xy 25.14375 87.146176) (xy 24.70625 87.146176)
(xy 24.637 87.152996) (xy 24.637 85.562845) (xy 24.640274 85.5296) (xy 24.637 85.496355) (xy 24.637 85.496348)
(xy 24.627204 85.396885) (xy 24.588492 85.26927) (xy 24.525628 85.151659) (xy 24.493613 85.112649) (xy 24.462224 85.074401)
(xy 24.462222 85.074399) (xy 24.441027 85.048573) (xy 24.415201 85.027378) (xy 20.662 81.274178) (xy 20.662 80.407289)
(xy 26.387038 86.132328) (xy 26.397095 86.182889) (xy 26.44436 86.296996) (xy 26.512977 86.399689) (xy 26.600311 86.487023)
(xy 26.703004 86.55564) (xy 26.817111 86.602905) (xy 26.938246 86.627) (xy 27.061754 86.627) (xy 27.182889 86.602905)
(xy 27.296996 86.55564) (xy 27.399689 86.487023) (xy 27.487023 86.399689) (xy 27.55564 86.296996) (xy 27.602905 86.182889)
(xy 27.627 86.061754) (xy 27.627 85.938246) (xy 27.602905 85.817111) (xy 27.55564 85.703004) (xy 27.487023 85.600311)
(xy 27.399689 85.512977) (xy 27.296996 85.44436) (xy 27.182889 85.397095) (xy 27.132328 85.387038) (xy 21.527 79.781711)
(xy 21.527 77.155488) (xy 22.372325 77.155488) (xy 22.372949 77.200001) (xy 22.372325 77.244515) (xy 22.37838 77.277355)
(xy 22.381766 77.307405) (xy 22.383171 77.340784) (xy 22.393682 77.38403) (xy 22.402978 77.427564) (xy 22.416196 77.45825)
(xy 22.426179 77.48678) (xy 22.434978 77.519016) (xy 22.45486 77.558861) (xy 22.473602 77.599218) (xy 22.493315 77.62619)
(xy 22.509395 77.651781) (xy 22.525145 77.681248) (xy 22.553389 77.715663) (xy 22.580649 77.750847) (xy 22.60587 77.772757)
(xy 22.627242 77.794129) (xy 22.632343 77.800001) (xy 22.627242 77.805872) (xy 22.60587 77.827244) (xy 22.580649 77.849154)
(xy 22.553389 77.884338) (xy 22.525145 77.918753) (xy 22.509395 77.94822) (xy 22.493315 77.973811) (xy 22.473602 78.000783)
(xy 22.45486 78.04114) (xy 22.434978 78.080985) (xy 22.426179 78.113221) (xy 22.416194 78.141756) (xy 22.402978 78.172438)
(xy 22.393684 78.215963) (xy 22.383171 78.259217) (xy 22.381766 78.292598) (xy 22.378381 78.322644) (xy 22.372325 78.355488)
(xy 22.372949 78.400002) (xy 22.372325 78.444515) (xy 22.37838 78.477355) (xy 22.381766 78.507405) (xy 22.383171 78.540784)
(xy 22.393682 78.58403) (xy 22.402978 78.627564) (xy 22.416196 78.65825) (xy 22.426179 78.68678) (xy 22.434978 78.719016)
(xy 22.45486 78.758861) (xy 22.473602 78.799218) (xy 22.493315 78.82619) (xy 22.509395 78.851781) (xy 22.525145 78.881248)
(xy 22.553389 78.915663) (xy 22.580649 78.950847) (xy 22.60587 78.972757) (xy 22.627242 78.994129) (xy 22.632343 79)
(xy 22.627242 79.005872) (xy 22.60587 79.027244) (xy 22.580649 79.049154) (xy 22.553389 79.084338) (xy 22.525145 79.118753)
(xy 22.509395 79.14822) (xy 22.493315 79.173811) (xy 22.473602 79.200783) (xy 22.45486 79.24114) (xy 22.434978 79.280985)
(xy 22.426179 79.313221) (xy 22.416194 79.341756) (xy 22.402978 79.372438) (xy 22.393684 79.415963) (xy 22.383171 79.459217)
(xy 22.381766 79.492598) (xy 22.378381 79.522644) (xy 22.372325 79.555488) (xy 22.372949 79.600002) (xy 22.372325 79.644515)
(xy 22.37838 79.677355) (xy 22.381766 79.707405) (xy 22.383171 79.740784) (xy 22.393682 79.78403) (xy 22.402978 79.827564)
(xy 22.416196 79.85825) (xy 22.426179 79.88678) (xy 22.434978 79.919016) (xy 22.45486 79.958861) (xy 22.473602 79.999218)
(xy 22.493315 80.02619) (xy 22.509395 80.051781) (xy 22.525145 80.081248) (xy 22.553389 80.115663) (xy 22.580649 80.150847)
(xy 22.60587 80.172757) (xy 22.627242 80.194129) (xy 22.649152 80.21935) (xy 22.684345 80.246617) (xy 22.718751 80.274853)
(xy 22.748211 80.2906) (xy 22.773809 80.306684) (xy 22.800781 80.326397) (xy 22.841138 80.345139) (xy 22.880983 80.365021)
(xy 22.913216 80.373819) (xy 22.941745 80.383802) (xy 22.972428 80.397019) (xy 23.015956 80.406314) (xy 23.059215 80.416828)
(xy 23.092592 80.418233) (xy 23.093121 80.418293) (xy 23.096689 80.419375) (xy 23.14466 80.4241) (xy 23.166709 80.426584)
(xy 23.170412 80.426636) (xy 23.174118 80.427001) (xy 23.196417 80.427001) (xy 23.244505 80.427676) (xy 23.248166 80.427001)
(xy 23.372999 80.427001) (xy 23.372999 80.874118) (xy 23.37045 80.899999) (xy 23.37629 80.959293) (xy 23.380625 81.003308)
(xy 23.41076 81.102648) (xy 23.459695 81.194201) (xy 23.525551 81.274447) (xy 23.545665 81.290954) (xy 29.599049 87.344339)
(xy 29.615552 87.364448) (xy 29.679 87.416518) (xy 29.695798 87.430304) (xy 29.78735 87.479239) (xy 29.88669 87.509374)
(xy 29.989999 87.519549) (xy 30.01588 87.517) (xy 30.483 87.517) (xy 30.483 87.641831) (xy 30.482326 87.645486)
(xy 30.483 87.69359) (xy 30.483 87.71588) (xy 30.483364 87.719577) (xy 30.483416 87.723281) (xy 30.485904 87.74536)
(xy 30.490626 87.793309) (xy 30.491707 87.796873) (xy 30.491767 87.797403) (xy 30.493172 87.830784) (xy 30.503685 87.874038)
(xy 30.512979 87.917563) (xy 30.526195 87.948245) (xy 30.53618 87.97678) (xy 30.544979 88.009016) (xy 30.564861 88.048861)
(xy 30.583603 88.089218) (xy 30.603316 88.11619) (xy 30.619396 88.141781) (xy 30.635146 88.171248) (xy 30.66339 88.205663)
(xy 30.69065 88.240847) (xy 30.715871 88.262757) (xy 30.737243 88.284129) (xy 30.759153 88.30935) (xy 30.794346 88.336617)
(xy 30.828752 88.364853) (xy 30.858212 88.3806) (xy 30.88381 88.396684) (xy 30.910782 88.416397) (xy 30.951139 88.435139)
(xy 30.990984 88.455021) (xy 31.023217 88.463819) (xy 31.051758 88.473807) (xy 31.082437 88.487021) (xy 31.125952 88.496313)
(xy 31.169216 88.506828) (xy 31.202595 88.508233) (xy 31.232644 88.511619) (xy 31.265487 88.517674) (xy 31.31 88.51705)
(xy 31.354514 88.517674) (xy 31.387354 88.511619) (xy 31.417404 88.508233) (xy 31.450783 88.506828) (xy 31.494029 88.496317)
(xy 31.537563 88.487021) (xy 31.568249 88.473803) (xy 31.596779 88.46382) (xy 31.629015 88.455021) (xy 31.66886 88.435139)
(xy 31.709217 88.416397) (xy 31.736189 88.396684) (xy 31.76178 88.380604) (xy 31.791247 88.364854) (xy 31.825662 88.33661)
(xy 31.860846 88.30935) (xy 31.882756 88.284129) (xy 31.904128 88.262757) (xy 31.929349 88.240847) (xy 31.956616 88.205654)
(xy 31.984852 88.171248) (xy 32.000599 88.141788) (xy 32.016683 88.11619) (xy 32.036396 88.089218) (xy 32.055138 88.048861)
(xy 32.07502 88.009016) (xy 32.083818 87.976783) (xy 32.093801 87.948254) (xy 32.107018 87.917571) (xy 32.116313 87.874043)
(xy 32.126827 87.830784) (xy 32.128232 87.797407) (xy 32.128292 87.796878) (xy 32.129374 87.79331) (xy 32.134099 87.745339)
(xy 32.136583 87.72329) (xy 32.136635 87.719587) (xy 32.137 87.715881) (xy 32.137 87.693582) (xy 32.137675 87.645494)
(xy 32.137 87.641833) (xy 32.137 87.428572) (xy 32.151139 87.435138) (xy 32.190984 87.45502) (xy 32.223217 87.463818)
(xy 32.251746 87.473801) (xy 32.282429 87.487018) (xy 32.325957 87.496313) (xy 32.369216 87.506827) (xy 32.402593 87.508232)
(xy 32.403122 87.508292) (xy 32.40669 87.509374) (xy 32.454661 87.514099) (xy 32.47671 87.516583) (xy 32.480413 87.516635)
(xy 32.484119 87.517) (xy 32.506418 87.517) (xy 32.554506 87.517675) (xy 32.558167 87.517) (xy 33.160141 87.517)
(xy 33.203004 87.54564) (xy 33.317111 87.592905) (xy 33.438246 87.617) (xy 33.561754 87.617) (xy 33.682889 87.592905)
(xy 33.796996 87.54564) (xy 33.899689 87.477023) (xy 33.987023 87.389689) (xy 34.05564 87.286996) (xy 34.102905 87.172889)
(xy 34.127 87.051754) (xy 34.127 86.928246) (xy 34.102905 86.807111) (xy 34.05564 86.693004) (xy 33.987023 86.590311)
(xy 33.899689 86.502977) (xy 33.796996 86.43436) (xy 33.682889 86.387095) (xy 33.561754 86.363) (xy 33.438246 86.363)
(xy 33.317111 86.387095) (xy 33.203004 86.43436) (xy 33.160141 86.463) (xy 32.737 86.463) (xy 32.737 86.338167)
(xy 32.737675 86.334506) (xy 32.737 86.286418) (xy 32.737 86.26412) (xy 32.736635 86.260414) (xy 32.736583 86.25671)
(xy 32.734098 86.234654) (xy 32.729374 86.186691) (xy 32.728292 86.183124) (xy 32.728232 86.182593) (xy 32.726827 86.149216)
(xy 32.716313 86.105957) (xy 32.707018 86.062429) (xy 32.693801 86.031746) (xy 32.683818 86.003217) (xy 32.67502 85.970984)
(xy 32.655138 85.931139) (xy 32.636396 85.890782) (xy 32.616683 85.86381) (xy 32.600599 85.838212) (xy 32.584852 85.808752)
(xy 32.556616 85.774346) (xy 32.529349 85.739153) (xy 32.504128 85.717243) (xy 32.482756 85.695871) (xy 32.460846 85.67065)
(xy 32.425662 85.64339) (xy 32.391247 85.615146) (xy 32.36178 85.599396) (xy 32.336189 85.583316) (xy 32.309217 85.563603)
(xy 32.26886 85.544861) (xy 32.229015 85.524979) (xy 32.196779 85.51618) (xy 32.168249 85.506197) (xy 32.137563 85.492979)
(xy 32.094029 85.483683) (xy 32.050783 85.473172) (xy 32.017404 85.471767) (xy 31.987354 85.468381) (xy 31.954514 85.462326)
(xy 31.91 85.46295) (xy 31.865487 85.462326) (xy 31.832644 85.468381) (xy 31.802595 85.471767) (xy 31.769216 85.473172)
(xy 31.725952 85.483687) (xy 31.682437 85.492979) (xy 31.651758 85.506193) (xy 31.623217 85.516181) (xy 31.590984 85.524979)
(xy 31.551139 85.544861) (xy 31.510782 85.563603) (xy 31.48381 85.583316) (xy 31.458212 85.5994) (xy 31.428752 85.615147)
(xy 31.394346 85.643383) (xy 31.359153 85.67065) (xy 31.337243 85.695871) (xy 31.315871 85.717243) (xy 31.29065 85.739153)
(xy 31.26339 85.774337) (xy 31.235146 85.808752) (xy 31.219396 85.838219) (xy 31.203316 85.86381) (xy 31.183603 85.890782)
(xy 31.164861 85.931139) (xy 31.144979 85.970984) (xy 31.13618 86.00322) (xy 31.126195 86.031755) (xy 31.112979 86.062437)
(xy 31.103685 86.105962) (xy 31.093172 86.149216) (xy 31.091767 86.182597) (xy 31.091707 86.183127) (xy 31.090626 86.186691)
(xy 31.085904 86.23464) (xy 31.083416 86.256719) (xy 31.083364 86.260423) (xy 31.083 86.26412) (xy 31.083 86.286408)
(xy 31.082326 86.334514) (xy 31.083 86.33817) (xy 31.083 86.551429) (xy 31.06886 86.544862) (xy 31.029015 86.52498)
(xy 30.996779 86.516181) (xy 30.968254 86.506199) (xy 30.93757 86.492982) (xy 30.894023 86.483683) (xy 30.850783 86.473173)
(xy 30.817408 86.471768) (xy 30.816878 86.471708) (xy 30.81331 86.470626) (xy 30.765339 86.465901) (xy 30.74329 86.463417)
(xy 30.739587 86.463365) (xy 30.735881 86.463) (xy 30.713583 86.463) (xy 30.665495 86.462325) (xy 30.661834 86.463)
(xy 30.20829 86.463) (xy 29.88229 86.137) (xy 29.951754 86.137) (xy 30.072889 86.112905) (xy 30.186996 86.06564)
(xy 30.289689 85.997023) (xy 30.377023 85.909689) (xy 30.44564 85.806996) (xy 30.468262 85.752381) (xy 30.533004 85.79564)
(xy 30.647111 85.842905) (xy 30.768246 85.867) (xy 30.891754 85.867) (xy 31.012889 85.842905) (xy 31.126996 85.79564)
(xy 31.229689 85.727023) (xy 31.317023 85.639689) (xy 31.38564 85.536996) (xy 31.432905 85.422889) (xy 31.457 85.301754)
(xy 31.457 85.178246) (xy 31.432905 85.057111) (xy 31.38564 84.943004) (xy 31.317023 84.840311) (xy 31.229689 84.752977)
(xy 31.126996 84.68436) (xy 31.027 84.64294) (xy 31.027 83.227) (xy 31.060244 83.227) (xy 31.063905 83.227675)
(xy 31.111993 83.227) (xy 31.134291 83.227) (xy 31.137997 83.226635) (xy 31.1417 83.226583) (xy 31.163749 83.224099)
(xy 31.21172 83.219374) (xy 31.215288 83.218292) (xy 31.215818 83.218232) (xy 31.249193 83.216827) (xy 31.292433 83.206317)
(xy 31.33598 83.197018) (xy 31.366664 83.183801) (xy 31.395189 83.173819) (xy 31.427425 83.16502) (xy 31.46727 83.145138)
(xy 31.507627 83.126396) (xy 31.534599 83.106683) (xy 31.56019 83.090603) (xy 31.589657 83.074853) (xy 31.624072 83.046609)
(xy 31.659256 83.019349) (xy 31.681166 82.994128) (xy 31.702538 82.972756) (xy 31.727759 82.950846) (xy 31.755026 82.915653)
(xy 31.783262 82.881247) (xy 31.799009 82.851787) (xy 31.815093 82.826189) (xy 31.834806 82.799217) (xy 31.853548 82.75886)
(xy 31.87343 82.719015) (xy 31.882228 82.686782) (xy 31.892213 82.658249) (xy 31.905428 82.62757) (xy 31.914724 82.584038)
(xy 31.925237 82.540783) (xy 31.926642 82.507409) (xy 31.930028 82.477358) (xy 31.936085 82.444506) (xy 31.93546 82.400001)
(xy 31.936085 82.355495) (xy 31.930027 82.322639) (xy 31.926642 82.292593) (xy 31.925237 82.259216) (xy 31.914723 82.215957)
(xy 31.905428 82.172429) (xy 31.892211 82.141746) (xy 31.882228 82.113217) (xy 31.87343 82.080984) (xy 31.853548 82.041139)
(xy 31.834806 82.000782) (xy 31.815093 81.97381) (xy 31.799009 81.948212) (xy 31.783262 81.918752) (xy 31.755026 81.884346)
(xy 31.727759 81.849153) (xy 31.702538 81.827243) (xy 31.681166 81.805871) (xy 31.676065 81.8) (xy 31.681166 81.794128)
(xy 31.702538 81.772756) (xy 31.727759 81.750846) (xy 31.755026 81.715653) (xy 31.783262 81.681247) (xy 31.799009 81.651787)
(xy 31.815093 81.626189) (xy 31.834806 81.599217) (xy 31.853548 81.55886) (xy 31.87343 81.519015) (xy 31.882228 81.486782)
(xy 31.892213 81.458249) (xy 31.905428 81.42757) (xy 31.914724 81.384038) (xy 31.925237 81.340783) (xy 31.926642 81.307409)
(xy 31.930028 81.277358) (xy 31.936085 81.244506) (xy 31.93546 81.2) (xy 31.936085 81.155495) (xy 31.930027 81.122639)
(xy 31.926642 81.092593) (xy 31.925237 81.059216) (xy 31.914723 81.015957) (xy 31.905428 80.972429) (xy 31.892211 80.941746)
(xy 31.882228 80.913217) (xy 31.87343 80.880984) (xy 31.853548 80.841139) (xy 31.834806 80.800782) (xy 31.815093 80.77381)
(xy 31.799009 80.748212) (xy 31.783262 80.718752) (xy 31.755026 80.684346) (xy 31.727759 80.649153) (xy 31.702538 80.627243)
(xy 31.681166 80.605871) (xy 31.676065 80.6) (xy 31.681166 80.594128) (xy 31.702538 80.572756) (xy 31.727759 80.550846)
(xy 31.755026 80.515653) (xy 31.783262 80.481247) (xy 31.799009 80.451787) (xy 31.815093 80.426189) (xy 31.834806 80.399217)
(xy 31.853548 80.35886) (xy 31.87343 80.319015) (xy 31.882228 80.286782) (xy 31.892213 80.258249) (xy 31.905428 80.22757)
(xy 31.914724 80.184038) (xy 31.925237 80.140783) (xy 31.926642 80.107409) (xy 31.930028 80.077358) (xy 31.936085 80.044506)
(xy 31.93546 80) (xy 31.936085 79.955495) (xy 31.930027 79.922639) (xy 31.926642 79.892593) (xy 31.925237 79.859216)
(xy 31.914723 79.815957) (xy 31.905428 79.772429) (xy 31.892211 79.741746) (xy 31.882228 79.713217) (xy 31.87343 79.680984)
(xy 31.853548 79.641139) (xy 31.834806 79.600782) (xy 31.815093 79.57381) (xy 31.799009 79.548212) (xy 31.783262 79.518752)
(xy 31.755026 79.484346) (xy 31.727759 79.449153) (xy 31.702538 79.427243) (xy 31.681166 79.405871) (xy 31.676065 79.4)
(xy 31.681166 79.394128) (xy 31.702538 79.372756) (xy 31.727759 79.350846) (xy 31.755026 79.315653) (xy 31.783262 79.281247)
(xy 31.799009 79.251787) (xy 31.815093 79.226189) (xy 31.834806 79.199217) (xy 31.853548 79.15886) (xy 31.87343 79.119015)
(xy 31.882228 79.086782) (xy 31.892213 79.058249) (xy 31.905428 79.02757) (xy 31.914724 78.984038) (xy 31.925237 78.940783)
(xy 31.926642 78.907409) (xy 31.930028 78.877358) (xy 31.936085 78.844506) (xy 31.93546 78.8) (xy 31.936085 78.755495)
(xy 31.930027 78.722639) (xy 31.926642 78.692593) (xy 31.925237 78.659216) (xy 31.914723 78.615957) (xy 31.905428 78.572429)
(xy 31.892211 78.541746) (xy 31.882228 78.513217) (xy 31.87343 78.480984) (xy 31.853548 78.441139) (xy 31.834806 78.400782)
(xy 31.815093 78.37381) (xy 31.799009 78.348212) (xy 31.783262 78.318752) (xy 31.755026 78.284346) (xy 31.727759 78.249153)
(xy 31.702538 78.227243) (xy 31.681166 78.205871) (xy 31.659256 78.18065) (xy 31.624072 78.15339) (xy 31.589657 78.125146)
(xy 31.56019 78.109396) (xy 31.534599 78.093316) (xy 31.507627 78.073603) (xy 31.46727 78.054861) (xy 31.427425 78.034979)
(xy 31.395189 78.02618) (xy 31.366659 78.016197) (xy 31.335973 78.002979) (xy 31.292439 77.993683) (xy 31.249193 77.983172)
(xy 31.215814 77.981767) (xy 31.215284 77.981707) (xy 31.21172 77.980626) (xy 31.16377 77.975903) (xy 31.141692 77.973416)
(xy 31.137988 77.973364) (xy 31.134291 77.973) (xy 31.112001 77.973) (xy 31.063897 77.972326) (xy 31.060241 77.973)
(xy 30.938572 77.973) (xy 30.945139 77.95886) (xy 30.965021 77.919015) (xy 30.973819 77.886782) (xy 30.983805 77.858246)
(xy 30.997021 77.827563) (xy 31.006313 77.784044) (xy 31.016828 77.740783) (xy 31.018233 77.707405) (xy 31.018293 77.706874)
(xy 31.019374 77.70331) (xy 31.024096 77.655366) (xy 31.026584 77.633283) (xy 31.026636 77.629578) (xy 31.027 77.625881)
(xy 31.027 77.603592) (xy 31.027674 77.555487) (xy 31.027 77.551831) (xy 31.027 76.275881) (xy 31.029549 76.25)
(xy 31.019374 76.14669) (xy 31.01596 76.135435) (xy 30.989239 76.04735) (xy 30.940304 75.955798) (xy 30.874448 75.875552)
(xy 30.854345 75.859054) (xy 26.560955 71.565666) (xy 26.544448 71.545552) (xy 26.464202 71.479696) (xy 26.425976 71.459264)
(xy 26.399689 71.432977) (xy 26.296996 71.36436) (xy 26.182889 71.317095) (xy 26.061754 71.293) (xy 25.938246 71.293)
(xy 25.817111 71.317095) (xy 25.703004 71.36436) (xy 25.600311 71.432977) (xy 25.512977 71.520311) (xy 25.44436 71.623004)
(xy 25.397095 71.737111) (xy 25.373 71.858246) (xy 25.373 71.981754) (xy 25.397095 72.102889) (xy 25.44436 72.216996)
(xy 25.512977 72.319689) (xy 25.600311 72.407023) (xy 25.703004 72.47564) (xy 25.817111 72.522905) (xy 25.938246 72.547)
(xy 26.051711 72.547) (xy 29.973001 76.468292) (xy 29.973 77.373) (xy 29.889759 77.373) (xy 29.886103 77.372326)
(xy 29.837998 77.373) (xy 29.815709 77.373) (xy 29.812012 77.373364) (xy 29.808307 77.373416) (xy 29.786224 77.375904)
(xy 29.73828 77.380626) (xy 29.734716 77.381707) (xy 29.734185 77.381767) (xy 29.700807 77.383172) (xy 29.657546 77.393687)
(xy 29.614027 77.402979) (xy 29.583344 77.416195) (xy 29.554808 77.426181) (xy 29.522575 77.434979) (xy 29.48273 77.454861)
(xy 29.442373 77.473603) (xy 29.415401 77.493316) (xy 29.389803 77.5094) (xy 29.360343 77.525147) (xy 29.325937 77.553383)
(xy 29.290744 77.58065) (xy 29.268834 77.605871) (xy 29.247462 77.627243) (xy 29.222241 77.649153) (xy 29.194981 77.684337)
(xy 29.166737 77.718752) (xy 29.150987 77.748219) (xy 29.134907 77.77381) (xy 29.115194 77.800782) (xy 29.096452 77.841139)
(xy 29.07657 77.880984) (xy 29.067771 77.91322) (xy 29.057789 77.941746) (xy 29.044572 77.97243) (xy 29.035275 78.015969)
(xy 29.024763 78.059216) (xy 29.023358 78.092593) (xy 29.019973 78.122637) (xy 29.013915 78.155495) (xy 29.01454 78.2)
(xy 29.013915 78.244506) (xy 29.019973 78.277364) (xy 29.023358 78.307408) (xy 29.024763 78.340783) (xy 29.035273 78.384023)
(xy 29.044572 78.42757) (xy 29.057789 78.458254) (xy 29.067771 78.486779) (xy 29.07657 78.519015) (xy 29.096452 78.55886)
(xy 29.115194 78.599217) (xy 29.134907 78.626189) (xy 29.150987 78.65178) (xy 29.166737 78.681247) (xy 29.194981 78.715662)
(xy 29.222241 78.750846) (xy 29.247462 78.772756) (xy 29.268834 78.794128) (xy 29.273935 78.8) (xy 29.268834 78.805871)
(xy 29.247462 78.827243) (xy 29.222241 78.849153) (xy 29.194981 78.884337) (xy 29.166737 78.918752) (xy 29.150987 78.948219)
(xy 29.134907 78.97381) (xy 29.115194 79.000782) (xy 29.096452 79.041139) (xy 29.07657 79.080984) (xy 29.067771 79.11322)
(xy 29.057789 79.141746) (xy 29.044572 79.17243) (xy 29.035275 79.215969) (xy 29.024763 79.259216) (xy 29.023358 79.292593)
(xy 29.019973 79.322637) (xy 29.013915 79.355495) (xy 29.01454 79.4) (xy 29.013915 79.444506) (xy 29.019973 79.477364)
(xy 29.023358 79.507408) (xy 29.024763 79.540783) (xy 29.035273 79.584023) (xy 29.044572 79.62757) (xy 29.057789 79.658254)
(xy 29.067771 79.686779) (xy 29.07657 79.719015) (xy 29.096452 79.75886) (xy 29.115194 79.799217) (xy 29.134907 79.826189)
(xy 29.150987 79.85178) (xy 29.166737 79.881247) (xy 29.194981 79.915662) (xy 29.222241 79.950846) (xy 29.247462 79.972756)
(xy 29.268834 79.994128) (xy 29.273935 80) (xy 29.268834 80.005871) (xy 29.247462 80.027243) (xy 29.222241 80.049153)
(xy 29.194981 80.084337) (xy 29.166737 80.118752) (xy 29.150987 80.148219) (xy 29.134907 80.17381) (xy 29.115194 80.200782)
(xy 29.096452 80.241139) (xy 29.07657 80.280984) (xy 29.067771 80.31322) (xy 29.057789 80.341746) (xy 29.044572 80.37243)
(xy 29.035275 80.415969) (xy 29.024763 80.459216) (xy 29.023358 80.492593) (xy 29.019973 80.522637) (xy 29.013915 80.555495)
(xy 29.01454 80.6) (xy 29.013915 80.644506) (xy 29.019973 80.677364) (xy 29.023358 80.707408) (xy 29.024763 80.740783)
(xy 29.035273 80.784023) (xy 29.044572 80.82757) (xy 29.057789 80.858254) (xy 29.067771 80.886779) (xy 29.07657 80.919015)
(xy 29.096452 80.95886) (xy 29.115194 80.999217) (xy 29.134907 81.026189) (xy 29.150987 81.05178) (xy 29.166737 81.081247)
(xy 29.194981 81.115662) (xy 29.222241 81.150846) (xy 29.247462 81.172756) (xy 29.268834 81.194128) (xy 29.273935 81.2)
(xy 29.268834 81.205871) (xy 29.247462 81.227243) (xy 29.222241 81.249153) (xy 29.194981 81.284337) (xy 29.166737 81.318752)
(xy 29.150987 81.348219) (xy 29.134907 81.37381) (xy 29.115194 81.400782) (xy 29.096452 81.441139) (xy 29.07657 81.480984)
(xy 29.067771 81.51322) (xy 29.057789 81.541746) (xy 29.044572 81.57243) (xy 29.035275 81.615969) (xy 29.024763 81.659216)
(xy 29.023358 81.692593) (xy 29.019973 81.722637) (xy 29.013915 81.755495) (xy 29.01454 81.8) (xy 29.013915 81.844506)
(xy 29.019973 81.877364) (xy 29.023358 81.907408) (xy 29.024763 81.940783) (xy 29.035273 81.984023) (xy 29.044572 82.02757)
(xy 29.057789 82.058254) (xy 29.067771 82.086779) (xy 29.07657 82.119015) (xy 29.096452 82.15886) (xy 29.115194 82.199217)
(xy 29.134907 82.226189) (xy 29.150987 82.25178) (xy 29.166737 82.281247) (xy 29.194981 82.315662) (xy 29.222241 82.350846)
(xy 29.247462 82.372756) (xy 29.268834 82.394128) (xy 29.290744 82.419349) (xy 29.325937 82.446616) (xy 29.360343 82.474852)
(xy 29.389803 82.490599) (xy 29.415401 82.506683) (xy 29.442373 82.526396) (xy 29.48273 82.545138) (xy 29.522575 82.56502)
(xy 29.554808 82.573818) (xy 29.583341 82.583803) (xy 29.61402 82.597018) (xy 29.657552 82.606314) (xy 29.700807 82.616827)
(xy 29.734181 82.618232) (xy 29.734712 82.618292) (xy 29.73828 82.619374) (xy 29.786244 82.624098) (xy 29.808299 82.626583)
(xy 29.812003 82.626635) (xy 29.815709 82.627) (xy 29.838007 82.627) (xy 29.886095 82.627675) (xy 29.889756 82.627)
(xy 30.061427 82.627) (xy 30.054861 82.641139) (xy 30.034979 82.680984) (xy 30.02618 82.71322) (xy 30.016195 82.741755)
(xy 30.002979 82.772437) (xy 29.993685 82.815962) (xy 29.983172 82.859216) (xy 29.981767 82.892597) (xy 29.981707 82.893131)
(xy 29.980627 82.89669) (xy 29.975911 82.944576) (xy 29.973416 82.966719) (xy 29.973364 82.970434) (xy 29.973001 82.974119)
(xy 29.973001 82.996339) (xy 29.972326 83.044514) (xy 29.973001 83.048175) (xy 29.973 84.84771) (xy 29.527 84.401711)
(xy 29.527 84.02588) (xy 29.529549 83.999999) (xy 29.519374 83.89669) (xy 29.489239 83.79735) (xy 29.479886 83.779851)
(xy 29.440304 83.705798) (xy 29.374448 83.625552) (xy 29.354339 83.609049) (xy 27.527 81.781711) (xy 27.527 81.348167)
(xy 27.527675 81.344506) (xy 27.527 81.296418) (xy 27.527 81.274119) (xy 27.526635 81.27041) (xy 27.526583 81.26671)
(xy 27.524099 81.244661) (xy 27.519374 81.19669) (xy 27.518292 81.193122) (xy 27.518232 81.192593) (xy 27.516827 81.159216)
(xy 27.506313 81.115957) (xy 27.497018 81.072429) (xy 27.483801 81.041746) (xy 27.473818 81.013217) (xy 27.46502 80.980984)
(xy 27.445138 80.941139) (xy 27.438572 80.927) (xy 27.651833 80.927) (xy 27.655494 80.927675) (xy 27.703582 80.927)
(xy 27.725881 80.927) (xy 27.729587 80.926635) (xy 27.733289 80.926583) (xy 27.755333 80.924099) (xy 27.80331 80.919374)
(xy 27.806878 80.918292) (xy 27.807407 80.918232) (xy 27.840784 80.916827) (xy 27.884031 80.906315) (xy 27.92757 80.897018)
(xy 27.958254 80.883801) (xy 27.98678 80.873819) (xy 28.019016 80.86502) (xy 28.058861 80.845138) (xy 28.099218 80.826396)
(xy 28.12619 80.806683) (xy 28.151781 80.790603) (xy 28.181248 80.774853) (xy 28.215663 80.746609) (xy 28.250847 80.719349)
(xy 28.272757 80.694128) (xy 28.294129 80.672756) (xy 28.31935 80.650846) (xy 28.346617 80.615653) (xy 28.374853 80.581247)
(xy 28.3906 80.551787) (xy 28.406684 80.526189) (xy 28.426397 80.499217) (xy 28.445139 80.45886) (xy 28.465021 80.419015)
(xy 28.473819 80.386782) (xy 28.483805 80.358246) (xy 28.497021 80.327563) (xy 28.506313 80.284044) (xy 28.516828 80.240783)
(xy 28.518233 80.207405) (xy 28.521619 80.177353) (xy 28.527674 80.144514) (xy 28.52705 80.1) (xy 28.527674 80.055487)
(xy 28.521619 80.022644) (xy 28.518233 79.992595) (xy 28.516828 79.959216) (xy 28.506313 79.915952) (xy 28.497021 79.872437)
(xy 28.483807 79.841758) (xy 28.473819 79.813217) (xy 28.465021 79.780984) (xy 28.445139 79.741139) (xy 28.426397 79.700782)
(xy 28.406684 79.67381) (xy 28.3906 79.648212) (xy 28.374853 79.618752) (xy 28.346617 79.584346) (xy 28.31935 79.549153)
(xy 28.294129 79.527243) (xy 28.272757 79.505871) (xy 28.267656 79.5) (xy 28.272757 79.494128) (xy 28.294129 79.472756)
(xy 28.31935 79.450846) (xy 28.346617 79.415653) (xy 28.374853 79.381247) (xy 28.3906 79.351787) (xy 28.406684 79.326189)
(xy 28.426397 79.299217) (xy 28.445139 79.25886) (xy 28.465021 79.219015) (xy 28.473819 79.186782) (xy 28.483805 79.158246)
(xy 28.497021 79.127563) (xy 28.506313 79.084044) (xy 28.516828 79.040783) (xy 28.518233 79.007405) (xy 28.521619 78.977353)
(xy 28.527674 78.944514) (xy 28.52705 78.9) (xy 28.527674 78.855487) (xy 28.521619 78.822644) (xy 28.518233 78.792595)
(xy 28.516828 78.759216) (xy 28.506313 78.715952) (xy 28.497021 78.672437) (xy 28.483807 78.641758) (xy 28.473819 78.613217)
(xy 28.465021 78.580984) (xy 28.445139 78.541139) (xy 28.426397 78.500782) (xy 28.406684 78.47381) (xy 28.3906 78.448212)
(xy 28.374853 78.418752) (xy 28.346617 78.384346) (xy 28.31935 78.349153) (xy 28.294129 78.327243) (xy 28.272757 78.305871)
(xy 28.267656 78.3) (xy 28.272757 78.294128) (xy 28.294129 78.272756) (xy 28.31935 78.250846) (xy 28.346617 78.215653)
(xy 28.374853 78.181247) (xy 28.3906 78.151787) (xy 28.406684 78.126189) (xy 28.426397 78.099217) (xy 28.445139 78.05886)
(xy 28.465021 78.019015) (xy 28.473819 77.986782) (xy 28.483805 77.958246) (xy 28.497021 77.927563) (xy 28.506313 77.884044)
(xy 28.516828 77.840783) (xy 28.518233 77.807405) (xy 28.521619 77.777353) (xy 28.527674 77.744514) (xy 28.52705 77.7)
(xy 28.527674 77.655487) (xy 28.521619 77.622644) (xy 28.518233 77.592595) (xy 28.516828 77.559216) (xy 28.506313 77.515952)
(xy 28.497021 77.472437) (xy 28.483807 77.441758) (xy 28.473819 77.413217) (xy 28.465021 77.380984) (xy 28.445139 77.341139)
(xy 28.426397 77.300782) (xy 28.406684 77.27381) (xy 28.3906 77.248212) (xy 28.374853 77.218752) (xy 28.346617 77.184346)
(xy 28.31935 77.149153) (xy 28.294129 77.127243) (xy 28.272757 77.105871) (xy 28.250847 77.08065) (xy 28.215663 77.05339)
(xy 28.181248 77.025146) (xy 28.151781 77.009396) (xy 28.12619 76.993316) (xy 28.099218 76.973603) (xy 28.058861 76.954861)
(xy 28.019016 76.934979) (xy 27.98678 76.92618) (xy 27.958245 76.916195) (xy 27.927563 76.902979) (xy 27.884038 76.893685)
(xy 27.840784 76.883172) (xy 27.807403 76.881767) (xy 27.806874 76.881707) (xy 27.80331 76.880626) (xy 27.755353 76.875903)
(xy 27.733281 76.873416) (xy 27.729578 76.873364) (xy 27.725881 76.873) (xy 27.70359 76.873) (xy 27.655486 76.872326)
(xy 27.651831 76.873) (xy 27.438571 76.873) (xy 27.445138 76.85886) (xy 27.46502 76.819015) (xy 27.473818 76.786782)
(xy 27.483803 76.758249) (xy 27.497018 76.72757) (xy 27.506314 76.684038) (xy 27.516827 76.640783) (xy 27.518232 76.607409)
(xy 27.518292 76.606878) (xy 27.519374 76.60331) (xy 27.524098 76.555346) (xy 27.526583 76.533291) (xy 27.526635 76.529587)
(xy 27.527 76.525881) (xy 27.527 76.503583) (xy 27.527675 76.455495) (xy 27.527 76.451834) (xy 27.527 74.65588)
(xy 27.529549 74.629999) (xy 27.519374 74.52669) (xy 27.489239 74.42735) (xy 27.440304 74.335798) (xy 27.421306 74.312649)
(xy 27.374448 74.255552) (xy 27.354339 74.239049) (xy 27.092962 73.977673) (xy 27.082905 73.927111) (xy 27.03564 73.813004)
(xy 26.967023 73.710311) (xy 26.879689 73.622977) (xy 26.776996 73.55436) (xy 26.662889 73.507095) (xy 26.541754 73.483)
(xy 26.418246 73.483) (xy 26.297111 73.507095) (xy 26.183004 73.55436) (xy 26.080311 73.622977) (xy 25.992977 73.710311)
(xy 25.92436 73.813004) (xy 25.877095 73.927111) (xy 25.853 74.048246) (xy 25.853 74.171754) (xy 25.877095 74.292889)
(xy 25.92436 74.406996) (xy 25.973621 74.48072) (xy 25.97331 74.480626) (xy 25.895881 74.473) (xy 25.87 74.470451)
(xy 25.844119 74.473) (xy 24.525881 74.473) (xy 24.5 74.470451) (xy 24.474119 74.473) (xy 24.39669 74.480626)
(xy 24.29735 74.510761) (xy 24.205798 74.559696) (xy 24.125552 74.625552) (xy 24.109053 74.645656) (xy 23.54566 75.209051)
(xy 23.525552 75.225553) (xy 23.497033 75.260304) (xy 23.459695 75.3058) (xy 23.41076 75.397352) (xy 23.380625 75.496692)
(xy 23.37045 75.600001) (xy 23.373 75.625891) (xy 23.372999 76.373001) (xy 23.248168 76.373001) (xy 23.244513 76.372327)
(xy 23.196408 76.373001) (xy 23.174118 76.373001) (xy 23.170421 76.373365) (xy 23.166717 76.373417) (xy 23.144638 76.375905)
(xy 23.096689 76.380627) (xy 23.093125 76.381708) (xy 23.092594 76.381768) (xy 23.059215 76.383173) (xy 23.015951 76.393688)
(xy 22.972436 76.40298) (xy 22.941757 76.416194) (xy 22.913216 76.426182) (xy 22.880983 76.43498) (xy 22.841138 76.454862)
(xy 22.800781 76.473604) (xy 22.773809 76.493317) (xy 22.748211 76.509401) (xy 22.718751 76.525148) (xy 22.684345 76.553384)
(xy 22.649152 76.580651) (xy 22.627242 76.605872) (xy 22.60587 76.627244) (xy 22.580649 76.649154) (xy 22.553389 76.684338)
(xy 22.525145 76.718753) (xy 22.509395 76.74822) (xy 22.493315 76.773811) (xy 22.473602 76.800783) (xy 22.45486 76.84114)
(xy 22.434978 76.880985) (xy 22.426179 76.913221) (xy 22.416194 76.941756) (xy 22.402978 76.972438) (xy 22.393684 77.015963)
(xy 22.383171 77.059217) (xy 22.381766 77.092598) (xy 22.378381 77.122644) (xy 22.372325 77.155488) (xy 21.527 77.155488)
(xy 21.527 69.408246) (xy 25.253 69.408246) (xy 25.253 69.531754) (xy 25.277095 69.652889) (xy 25.32436 69.766996)
(xy 25.392977 69.869689) (xy 25.480311 69.957023) (xy 25.583004 70.02564) (xy 25.697111 70.072905) (xy 25.747673 70.082962)
(xy 27.398564 71.733854) (xy 27.398569 71.733858) (xy 28.199764 72.535054) (xy 28.201876 72.538121) (xy 28.236401 72.571691)
(xy 28.252126 72.587416) (xy 28.254994 72.58977) (xy 28.257658 72.59236) (xy 28.275046 72.606226) (xy 28.312269 72.636775)
(xy 28.315557 72.638533) (xy 28.31597 72.638861) (xy 28.340564 72.661469) (xy 28.378587 72.684623) (xy 28.41594 72.708831)
(xy 28.446977 72.721179) (xy 28.474223 72.734301) (xy 28.503226 72.750865) (xy 28.545424 72.76497) (xy 28.587248 72.780267)
(xy 28.620263 72.785401) (xy 28.649725 72.792125) (xy 28.681703 72.801826) (xy 28.726028 72.806192) (xy 28.770159 72.811792)
(xy 28.803472 72.809452) (xy 28.833731 72.809452) (xy 28.841474 72.809996) (xy 28.842018 72.817741) (xy 28.842018 72.847994)
(xy 28.839678 72.881312) (xy 28.845279 72.92545) (xy 28.849644 72.969766) (xy 28.859343 73.001739) (xy 28.866071 73.031216)
(xy 28.871202 73.064214) (xy 28.886492 73.106021) (xy 28.900605 73.148244) (xy 28.917168 73.177245) (xy 28.93029 73.204493)
(xy 28.94264 73.235532) (xy 28.966845 73.272881) (xy 28.989996 73.310899) (xy 29.012602 73.335492) (xy 29.012941 73.335917)
(xy 29.014696 73.339201) (xy 29.045223 73.376397) (xy 29.059113 73.393815) (xy 29.061706 73.396481) (xy 29.064055 73.399344)
(xy 29.079761 73.41505) (xy 29.113352 73.449596) (xy 29.116419 73.451708) (xy 31.973001 76.308291) (xy 31.973 83.956619)
(xy 31.970451 83.9825) (xy 31.973 84.00838) (xy 31.980626 84.085809) (xy 32.010761 84.185149) (xy 32.059696 84.276702)
(xy 32.125552 84.356948) (xy 32.145666 84.373455) (xy 40.386554 92.614345) (xy 40.403052 92.634448) (xy 40.483298 92.700304)
(xy 40.57485 92.749239) (xy 40.67419 92.779374) (xy 40.7775 92.789549) (xy 40.803381 92.787) (xy 42.520141 92.787)
(xy 42.563004 92.81564) (xy 42.677111 92.862905) (xy 42.798246 92.887) (xy 42.921754 92.887) (xy 43.042889 92.862905)
(xy 43.156996 92.81564) (xy 43.259689 92.747023) (xy 43.347023 92.659689) (xy 43.41564 92.556996) (xy 43.462905 92.442889)
(xy 43.487 92.321754) (xy 43.487 92.198246) (xy 43.462905 92.077111) (xy 43.41564 91.963004) (xy 43.347023 91.860311)
(xy 43.259689 91.772977) (xy 43.156996 91.70436) (xy 43.042889 91.657095) (xy 42.921754 91.633) (xy 42.798246 91.633)
(xy 42.677111 91.657095) (xy 42.563004 91.70436) (xy 42.520141 91.733) (xy 40.995791 91.733) (xy 34.244873 84.982083)
(xy 34.356996 84.93564) (xy 34.459689 84.867023) (xy 34.547023 84.779689) (xy 34.61564 84.676996) (xy 34.662905 84.562889)
(xy 34.687 84.441754) (xy 34.687 84.318246) (xy 34.662905 84.197111) (xy 34.61564 84.083004) (xy 34.547023 83.980311)
(xy 34.459689 83.892977) (xy 34.356996 83.82436) (xy 34.242889 83.777095) (xy 34.192328 83.767038) (xy 33.777001 83.351712)
(xy 33.777001 79.563922) (xy 33.796996 79.55564) (xy 33.899689 79.487023) (xy 33.987023 79.399689) (xy 34.05564 79.296996)
(xy 34.102905 79.182889) (xy 34.127 79.061754) (xy 34.127 78.938246) (xy 34.102905 78.817111) (xy 34.05564 78.703004)
(xy 33.987023 78.600311) (xy 33.899689 78.512977) (xy 33.796996 78.44436) (xy 33.682889 78.397095) (xy 33.561754 78.373)
(xy 33.438246 78.373) (xy 33.317111 78.397095) (xy 33.203004 78.44436) (xy 33.100311 78.512977) (xy 33.027 78.586288)
(xy 33.027 76.115877) (xy 33.029549 76.089999) (xy 33.026476 76.058801) (xy 33.019374 75.98669) (xy 32.989239 75.88735)
(xy 32.940304 75.795798) (xy 32.874448 75.715552) (xy 32.854339 75.699049) (xy 29.981427 72.826138) (xy 29.991963 72.814676)
(xy 30.015112 72.776661) (xy 30.039324 72.739302) (xy 30.051674 72.708262) (xy 30.064795 72.681017) (xy 30.081359 72.652014)
(xy 30.095464 72.609816) (xy 30.110761 72.567992) (xy 30.115895 72.534977) (xy 30.122619 72.505515) (xy 30.13232 72.473537)
(xy 30.136686 72.429212) (xy 30.138605 72.414086) (xy 35.3177 72.414086) (xy 35.3177 72.585914) (xy 35.351222 72.754441)
(xy 35.416977 72.913189) (xy 35.51244 73.056059) (xy 35.633941 73.17756) (xy 35.776811 73.273023) (xy 35.935559 73.338778)
(xy 36.104086 73.3723) (xy 36.275914 73.3723) (xy 36.444441 73.338778) (xy 36.603189 73.273023) (xy 36.746059 73.17756)
(xy 36.86756 73.056059) (xy 36.963023 72.913189) (xy 37.028778 72.754441) (xy 37.0623 72.585914) (xy 37.0623 72.414086)
(xy 37.028778 72.245559) (xy 36.963023 72.086811) (xy 36.86756 71.943941) (xy 36.746059 71.82244) (xy 36.603189 71.726977)
(xy 36.444441 71.661222) (xy 36.275914 71.6277) (xy 36.104086 71.6277) (xy 35.935559 71.661222) (xy 35.776811 71.726977)
(xy 35.633941 71.82244) (xy 35.51244 71.943941) (xy 35.416977 72.086811) (xy 35.351222 72.245559) (xy 35.3177 72.414086)
(xy 30.138605 72.414086) (xy 30.142286 72.385081) (xy 30.139946 72.351768) (xy 30.139946 72.321508) (xy 30.142286 72.288195)
(xy 30.136685 72.244061) (xy 30.13232 72.19974) (xy 30.12262 72.167765) (xy 30.115895 72.138299) (xy 30.110761 72.105284)
(xy 30.095464 72.06346) (xy 30.081359 72.021262) (xy 30.064795 71.992259) (xy 30.051674 71.965014) (xy 30.039324 71.933974)
(xy 30.015112 71.896615) (xy 29.991963 71.8586) (xy 29.969357 71.834007) (xy 29.950501 71.810363) (xy 29.93156 71.782858)
(xy 29.899645 71.751826) (xy 29.868613 71.719911) (xy 29.841109 71.70097) (xy 29.817456 71.682108) (xy 29.792863 71.659502)
(xy 29.754845 71.636351) (xy 29.717496 71.612146) (xy 29.686457 71.599796) (xy 29.659209 71.586674) (xy 29.630208 71.570111)
(xy 29.587985 71.555998) (xy 29.546178 71.540708) (xy 29.51318 71.535577) (xy 29.483707 71.52885) (xy 29.451731 71.51915)
(xy 29.40741 71.514785) (xy 29.363276 71.509184) (xy 29.329958 71.511524) (xy 29.299704 71.511524) (xy 29.266386 71.509184)
(xy 29.222251 71.514785) (xy 29.177932 71.51915) (xy 29.145956 71.52885) (xy 29.116484 71.535577) (xy 29.083485 71.540708)
(xy 29.041694 71.555992) (xy 28.999454 71.570111) (xy 28.970442 71.586681) (xy 28.94322 71.599791) (xy 28.912168 71.612145)
(xy 28.874809 71.636357) (xy 28.8368 71.659502) (xy 28.825333 71.670043) (xy 28.143858 70.988569) (xy 28.143854 70.988564)
(xy 26.492962 69.337673) (xy 26.482905 69.287111) (xy 26.43564 69.173004) (xy 26.367023 69.070311) (xy 26.279689 68.982977)
(xy 26.176996 68.91436) (xy 26.062889 68.867095) (xy 25.941754 68.843) (xy 25.818246 68.843) (xy 25.697111 68.867095)
(xy 25.583004 68.91436) (xy 25.480311 68.982977) (xy 25.392977 69.070311) (xy 25.32436 69.173004) (xy 25.277095 69.287111)
(xy 25.253 69.408246) (xy 21.527 69.408246) (xy 21.527 66.49375) (xy 31.146176 66.49375) (xy 31.146176 66.93125)
(xy 31.157658 67.047831) (xy 31.191664 67.159932) (xy 31.246885 67.263244) (xy 31.321201 67.353799) (xy 31.411756 67.428115)
(xy 31.515068 67.483336) (xy 31.570001 67.5) (xy 31.515068 67.516664) (xy 31.411756 67.571885) (xy 31.321201 67.646201)
(xy 31.246885 67.736756) (xy 31.191664 67.840068) (xy 31.157658 67.952169) (xy 31.146176 68.06875) (xy 31.146176 68.50625)
(xy 31.157658 68.622831) (xy 31.191664 68.734932) (xy 31.246885 68.838244) (xy 31.321201 68.928799) (xy 31.411756 69.003115)
(xy 31.515068 69.058336) (xy 31.627169 69.092342) (xy 31.74375 69.103824) (xy 32.25625 69.103824) (xy 32.372831 69.092342)
(xy 32.484932 69.058336) (xy 32.588244 69.003115) (xy 32.678799 68.928799) (xy 32.753115 68.838244) (xy 32.765806 68.8145)
(xy 33.376619 68.8145) (xy 33.4025 68.817049) (xy 33.428381 68.8145) (xy 33.50581 68.806874) (xy 33.60515 68.776739)
(xy 33.696702 68.727804) (xy 33.776948 68.661948) (xy 33.793455 68.641834) (xy 33.942327 68.492962) (xy 33.992889 68.482905)
(xy 34.106996 68.43564) (xy 34.194757 68.377) (xy 37.23171 68.377) (xy 37.634053 68.779344) (xy 37.650552 68.799448)
(xy 37.675813 68.820179) (xy 37.691664 68.872432) (xy 37.746885 68.975744) (xy 37.821201 69.066299) (xy 37.911756 69.140615)
(xy 38.015068 69.195836) (xy 38.070001 69.2125) (xy 38.015068 69.229164) (xy 37.911756 69.284385) (xy 37.821201 69.358701)
(xy 37.746885 69.449256) (xy 37.700695 69.535672) (xy 37.694329 69.503667) (xy 37.576398 69.218955) (xy 37.405188 68.962721)
(xy 37.187279 68.744812) (xy 36.931045 68.573602) (xy 36.646333 68.455671) (xy 36.344085 68.39555) (xy 36.035915 68.39555)
(xy 35.733667 68.455671) (xy 35.448955 68.573602) (xy 35.192721 68.744812) (xy 34.974812 68.962721) (xy 34.803602 69.218955)
(xy 34.685671 69.503667) (xy 34.62555 69.805915) (xy 34.62555 70.114085) (xy 34.685671 70.416333) (xy 34.803602 70.701045)
(xy 34.974812 70.957279) (xy 35.192721 71.175188) (xy 35.448955 71.346398) (xy 35.733667 71.464329) (xy 36.035915 71.52445)
(xy 36.344085 71.52445) (xy 36.646333 71.464329) (xy 36.931045 71.346398) (xy 37.157108 71.195347) (xy 37.17436 71.236996)
(xy 37.203 71.279859) (xy 37.203 73.840533) (xy 37.187279 73.824812) (xy 36.931045 73.653602) (xy 36.646333 73.535671)
(xy 36.344085 73.47555) (xy 36.035915 73.47555) (xy 35.733667 73.535671) (xy 35.448955 73.653602) (xy 35.192721 73.824812)
(xy 34.974812 74.042721) (xy 34.803602 74.298955) (xy 34.685671 74.583667) (xy 34.62555 74.885915) (xy 34.62555 75.194085)
(xy 34.685671 75.496333) (xy 34.803602 75.781045) (xy 34.974812 76.037279) (xy 35.192721 76.255188) (xy 35.448955 76.426398)
(xy 35.733667 76.544329) (xy 36.035915 76.60445) (xy 36.344085 76.60445) (xy 36.646333 76.544329) (xy 36.931045 76.426398)
(xy 37.187279 76.255188) (xy 37.203 76.239467) (xy 37.203001 84.984109) (xy 37.200451 85.01) (xy 37.210626 85.113309)
(xy 37.240761 85.212649) (xy 37.289696 85.304201) (xy 37.289697 85.304202) (xy 37.355553 85.384448) (xy 37.375662 85.400951)
(xy 44.753 92.77829) (xy 44.753001 94.260557) (xy 44.753 94.260567) (xy 44.753 94.300141) (xy 44.72436 94.343004)
(xy 44.677095 94.457111) (xy 44.653 94.578246) (xy 44.653 94.701754) (xy 44.677095 94.822889) (xy 44.72436 94.936996)
(xy 44.792977 95.039689) (xy 44.880311 95.127023) (xy 44.983004 95.19564) (xy 45.097111 95.242905) (xy 45.218246 95.267)
(xy 45.341754 95.267) (xy 45.462889 95.242905) (xy 45.576996 95.19564) (xy 45.679689 95.127023) (xy 45.767023 95.039689)
(xy 45.83564 94.936996) (xy 45.882905 94.822889) (xy 45.907 94.701754) (xy 45.907 94.578246) (xy 45.882905 94.457111)
(xy 45.83564 94.343004) (xy 45.807 94.300141) (xy 45.807 92.840158) (xy 48.733421 95.766579) (xy 48.79055 95.813464)
(xy 48.855728 95.848303) (xy 48.926451 95.869756) (xy 49 95.877) (xy 49.073549 95.869756) (xy 49.144272 95.848303)
(xy 49.20945 95.813464) (xy 49.266579 95.766579) (xy 50.266579 94.766579) (xy 50.313464 94.70945) (xy 50.348303 94.644272)
(xy 50.369756 94.573549) (xy 50.377 94.5) (xy 50.377 93.377) (xy 51.5 93.377) (xy 51.573549 93.369756)
(xy 51.644272 93.348303) (xy 51.70945 93.313464) (xy 51.766579 93.266579) (xy 51.813464 93.20945) (xy 51.848303 93.144272)
(xy 51.869756 93.073549) (xy 51.877 93) (xy 51.877 91.25) (xy 51.870918 91.188246) (xy 53.203 91.188246)
(xy 53.203 91.311754) (xy 53.227095 91.432889) (xy 53.27436 91.546996) (xy 53.342977 91.649689) (xy 53.430311 91.737023)
(xy 53.533004 91.80564) (xy 53.647111 91.852905) (xy 53.768246 91.877) (xy 53.891754 91.877) (xy 54.012889 91.852905)
(xy 54.126996 91.80564) (xy 54.229689 91.737023) (xy 54.317023 91.649689) (xy 54.38564 91.546996) (xy 54.432905 91.432889)
(xy 54.445269 91.370732) (xy 59.322251 86.49375) (xy 64.646176 86.49375) (xy 64.646176 86.93125) (xy 64.657658 87.047831)
(xy 64.691664 87.159932) (xy 64.746885 87.263244) (xy 64.821201 87.353799) (xy 64.911756 87.428115) (xy 65.015068 87.483336)
(xy 65.070001 87.5) (xy 65.015068 87.516664) (xy 64.911756 87.571885) (xy 64.821201 87.646201) (xy 64.746885 87.736756)
(xy 64.691664 87.840068) (xy 64.657658 87.952169) (xy 64.646176 88.06875) (xy 64.646176 88.50625) (xy 64.657658 88.622831)
(xy 64.691664 88.734932) (xy 64.746885 88.838244) (xy 64.821201 88.928799) (xy 64.911756 89.003115) (xy 65.015068 89.058336)
(xy 65.127169 89.092342) (xy 65.24375 89.103824) (xy 65.75625 89.103824) (xy 65.872831 89.092342) (xy 65.984932 89.058336)
(xy 66.088244 89.003115) (xy 66.178799 88.928799) (xy 66.253115 88.838244) (xy 66.308336 88.734932) (xy 66.312134 88.722413)
(xy 66.273 88.919151) (xy 66.273 89.160849) (xy 66.320153 89.397903) (xy 66.412647 89.621202) (xy 66.546927 89.822167)
(xy 66.717833 89.993073) (xy 66.918798 90.127353) (xy 67.142097 90.219847) (xy 67.379151 90.267) (xy 67.620849 90.267)
(xy 67.857903 90.219847) (xy 68.081202 90.127353) (xy 68.282167 89.993073) (xy 68.453073 89.822167) (xy 68.587353 89.621202)
(xy 68.679847 89.397903) (xy 68.727 89.160849) (xy 68.727 88.919151) (xy 68.679847 88.682097) (xy 68.587353 88.458798)
(xy 68.453073 88.257833) (xy 68.43224 88.237) (xy 68.491711 88.237) (xy 68.882605 88.627894) (xy 68.860153 88.682097)
(xy 68.813 88.919151) (xy 68.813 89.160849) (xy 68.860153 89.397903) (xy 68.952647 89.621202) (xy 69.086927 89.822167)
(xy 69.257833 89.993073) (xy 69.458798 90.127353) (xy 69.682097 90.219847) (xy 69.919151 90.267) (xy 70.160849 90.267)
(xy 70.397903 90.219847) (xy 70.621202 90.127353) (xy 70.822167 89.993073) (xy 70.993073 89.822167) (xy 71.127353 89.621202)
(xy 71.129094 89.617) (xy 72.291669 89.617) (xy 72.32 89.61979) (xy 72.348331 89.617) (xy 72.348336 89.617)
(xy 72.378045 89.614074) (xy 72.433111 89.608651) (xy 72.47777 89.595103) (xy 72.541876 89.575657) (xy 72.642115 89.522079)
(xy 72.729974 89.449974) (xy 72.748039 89.427962) (xy 73.357962 88.818039) (xy 73.379974 88.799974) (xy 73.452079 88.712115)
(xy 73.505657 88.611876) (xy 73.522024 88.557921) (xy 73.538651 88.503112) (xy 73.545437 88.434201) (xy 73.547 88.418336)
(xy 73.547 88.418331) (xy 73.54979 88.39) (xy 73.547 88.361669) (xy 73.547 87.566714) (xy 73.560954 87.600402)
(xy 73.629571 87.703095) (xy 73.716905 87.790429) (xy 73.819598 87.859046) (xy 73.933705 87.906311) (xy 74.05484 87.930406)
(xy 74.178348 87.930406) (xy 74.299483 87.906311) (xy 74.41359 87.859046) (xy 74.516283 87.790429) (xy 74.603617 87.703095)
(xy 74.672234 87.600402) (xy 74.719499 87.486295) (xy 74.743594 87.36516) (xy 74.743594 87.241652) (xy 74.719499 87.120517)
(xy 74.693594 87.057977) (xy 74.693594 85.764925) (xy 74.696384 85.736594) (xy 74.693352 85.705798) (xy 74.690617 85.678037)
(xy 74.685245 85.623482) (xy 74.662021 85.546927) (xy 74.652251 85.514718) (xy 74.598673 85.414479) (xy 74.526568 85.32662)
(xy 74.504557 85.308556) (xy 73.688039 84.492038) (xy 73.669974 84.470026) (xy 73.582115 84.397921) (xy 73.481876 84.344343)
(xy 73.41777 84.324897) (xy 73.373111 84.311349) (xy 73.318045 84.305926) (xy 73.288336 84.303) (xy 73.288331 84.303)
(xy 73.26 84.30021) (xy 73.231669 84.303) (xy 67.89833 84.303) (xy 67.869999 84.30021) (xy 67.841668 84.303)
(xy 67.841664 84.303) (xy 67.817971 84.305334) (xy 67.756888 84.311349) (xy 67.692782 84.330796) (xy 67.648124 84.344343)
(xy 67.547885 84.397921) (xy 67.460026 84.470026) (xy 67.441961 84.492038) (xy 67.112034 84.821965) (xy 67.090027 84.840026)
(xy 67.071966 84.862033) (xy 67.071963 84.862036) (xy 67.057221 84.88) (xy 67.017922 84.927885) (xy 66.988514 84.982905)
(xy 66.964344 85.028124) (xy 66.931349 85.136889) (xy 66.92021 85.25) (xy 66.922295 85.271176) (xy 66.65 85.271176)
(xy 66.576095 85.278455) (xy 66.50503 85.300012) (xy 66.439537 85.335019) (xy 66.382131 85.382131) (xy 66.335019 85.439537)
(xy 66.300012 85.50503) (xy 66.278455 85.576095) (xy 66.271176 85.65) (xy 66.271176 85.973) (xy 66.043558 85.973)
(xy 65.984932 85.941664) (xy 65.872831 85.907658) (xy 65.75625 85.896176) (xy 65.24375 85.896176) (xy 65.127169 85.907658)
(xy 65.015068 85.941664) (xy 64.911756 85.996885) (xy 64.821201 86.071201) (xy 64.746885 86.161756) (xy 64.691664 86.265068)
(xy 64.657658 86.377169) (xy 64.646176 86.49375) (xy 59.322251 86.49375) (xy 64.366001 81.45) (xy 74.461928 81.45)
(xy 74.474188 81.574482) (xy 74.510498 81.69418) (xy 74.569463 81.804494) (xy 74.648815 81.901185) (xy 74.745506 81.980537)
(xy 74.85582 82.039502) (xy 74.975518 82.075812) (xy 75.1 82.088072) (xy 75.21425 82.085) (xy 75.373 81.92625)
(xy 75.373 81.127) (xy 75.627 81.127) (xy 75.627 81.92625) (xy 75.78575 82.085) (xy 75.9 82.088072)
(xy 76.024482 82.075812) (xy 76.14418 82.039502) (xy 76.254494 81.980537) (xy 76.351185 81.901185) (xy 76.430537 81.804494)
(xy 76.489502 81.69418) (xy 76.525812 81.574482) (xy 76.538072 81.45) (xy 76.535 81.28575) (xy 76.37625 81.127)
(xy 75.627 81.127) (xy 75.373 81.127) (xy 74.62375 81.127) (xy 74.465 81.28575) (xy 74.461928 81.45)
(xy 64.366001 81.45) (xy 65.266001 80.55) (xy 74.461928 80.55) (xy 74.465 80.71425) (xy 74.62375 80.873)
(xy 75.373 80.873) (xy 75.373 80.07375) (xy 75.627 80.07375) (xy 75.627 80.873) (xy 76.37625 80.873)
(xy 76.535 80.71425) (xy 76.538072 80.55) (xy 76.525812 80.425518) (xy 76.489502 80.30582) (xy 76.430537 80.195506)
(xy 76.351185 80.098815) (xy 76.254494 80.019463) (xy 76.14418 79.960498) (xy 76.024482 79.924188) (xy 75.9 79.911928)
(xy 75.78575 79.915) (xy 75.627 80.07375) (xy 75.373 80.07375) (xy 75.21425 79.915) (xy 75.1 79.911928)
(xy 74.975518 79.924188) (xy 74.85582 79.960498) (xy 74.745506 80.019463) (xy 74.648815 80.098815) (xy 74.569463 80.195506)
(xy 74.510498 80.30582) (xy 74.474188 80.425518) (xy 74.461928 80.55) (xy 65.266001 80.55) (xy 65.489001 80.327)
(xy 71.471669 80.327) (xy 71.5 80.32979) (xy 71.528331 80.327) (xy 71.528336 80.327) (xy 71.560937 80.323789)
(xy 71.613111 80.318651) (xy 71.661743 80.303898) (xy 71.721876 80.285657) (xy 71.822115 80.232079) (xy 71.909974 80.159974)
(xy 71.928039 80.137962) (xy 72.489002 79.577) (xy 73.794561 79.577) (xy 73.800012 79.59497) (xy 73.835019 79.660463)
(xy 73.882131 79.717869) (xy 73.939537 79.764981) (xy 74.00503 79.799988) (xy 74.076095 79.821545) (xy 74.15 79.828824)
(xy 74.95 79.828824) (xy 75.023905 79.821545) (xy 75.09497 79.799988) (xy 75.160463 79.764981) (xy 75.217869 79.717869)
(xy 75.264981 79.660463) (xy 75.299988 79.59497) (xy 75.305439 79.577) (xy 75.694561 79.577) (xy 75.700012 79.59497)
(xy 75.735019 79.660463) (xy 75.782131 79.717869) (xy 75.839537 79.764981) (xy 75.90503 79.799988) (xy 75.976095 79.821545)
(xy 76.05 79.828824) (xy 76.85 79.828824) (xy 76.923905 79.821545) (xy 76.99497 79.799988) (xy 77.060463 79.764981)
(xy 77.117869 79.717869) (xy 77.164981 79.660463) (xy 77.199988 79.59497) (xy 77.205439 79.577) (xy 78.010999 79.577)
(xy 78.423001 79.989003) (xy 78.423 80.504571) (xy 78.397095 80.567111) (xy 78.373 80.688246) (xy 78.373 80.811754)
(xy 78.397095 80.932889) (xy 78.44436 81.046996) (xy 78.512977 81.149689) (xy 78.600311 81.237023) (xy 78.703004 81.30564)
(xy 78.817111 81.352905) (xy 78.865825 81.362595) (xy 78.875551 81.374446) (xy 78.940283 81.42757) (xy 78.955798 81.440303)
(xy 79.047349 81.489238) (xy 79.146689 81.519373) (xy 79.249999 81.529548) (xy 79.275889 81.526998) (xy 83.160141 81.527)
(xy 83.203004 81.55564) (xy 83.317111 81.602905) (xy 83.438246 81.627) (xy 83.561754 81.627) (xy 83.682889 81.602905)
(xy 83.796996 81.55564) (xy 83.899689 81.487023) (xy 83.987023 81.399689) (xy 84.05564 81.296996) (xy 84.102905 81.182889)
(xy 84.127 81.061754) (xy 84.127 80.938246) (xy 84.102905 80.817111) (xy 84.05564 80.703004) (xy 83.987023 80.600311)
(xy 83.899689 80.512977) (xy 83.796996 80.44436) (xy 83.682889 80.397095) (xy 83.561754 80.373) (xy 83.438246 80.373)
(xy 83.317111 80.397095) (xy 83.203004 80.44436) (xy 83.16014 80.473001) (xy 79.577 80.472999) (xy 79.577 79.778328)
(xy 79.57979 79.749999) (xy 79.577 79.72167) (xy 79.577 79.721664) (xy 79.56865 79.636888) (xy 79.535657 79.528124)
(xy 79.482079 79.427885) (xy 79.437036 79.373001) (xy 79.428037 79.362035) (xy 79.428035 79.362033) (xy 79.409974 79.340026)
(xy 79.387967 79.321965) (xy 78.678039 78.612038) (xy 78.659974 78.590026) (xy 78.572115 78.517921) (xy 78.471876 78.464343)
(xy 78.40777 78.444897) (xy 78.363111 78.431349) (xy 78.308045 78.425926) (xy 78.278336 78.423) (xy 78.278331 78.423)
(xy 78.25 78.42021) (xy 78.221669 78.423) (xy 77.205439 78.423) (xy 77.199988 78.40503) (xy 77.164981 78.339537)
(xy 77.117869 78.282131) (xy 77.060463 78.235019) (xy 76.99497 78.200012) (xy 76.923905 78.178455) (xy 76.85 78.171176)
(xy 76.05 78.171176) (xy 75.976095 78.178455) (xy 75.90503 78.200012) (xy 75.839537 78.235019) (xy 75.782131 78.282131)
(xy 75.735019 78.339537) (xy 75.700012 78.40503) (xy 75.694561 78.423) (xy 75.305439 78.423) (xy 75.299988 78.40503)
(xy 75.264981 78.339537) (xy 75.217869 78.282131) (xy 75.160463 78.235019) (xy 75.09497 78.200012) (xy 75.023905 78.178455)
(xy 74.95 78.171176) (xy 74.15 78.171176) (xy 74.076095 78.178455) (xy 74.00503 78.200012) (xy 73.939537 78.235019)
(xy 73.882131 78.282131) (xy 73.835019 78.339537) (xy 73.800012 78.40503) (xy 73.794561 78.423) (xy 72.278328 78.423)
(xy 72.249999 78.42021) (xy 72.22167 78.423) (xy 72.221664 78.423) (xy 72.136888 78.43135) (xy 72.028124 78.464343)
(xy 71.927885 78.517921) (xy 71.884829 78.553257) (xy 71.862035 78.571963) (xy 71.862033 78.571965) (xy 71.840026 78.590026)
(xy 71.821965 78.612033) (xy 71.260999 79.173) (xy 65.278331 79.173) (xy 65.25 79.17021) (xy 65.221669 79.173)
(xy 65.221664 79.173) (xy 65.194886 79.175637) (xy 65.136888 79.181349) (xy 65.078126 79.199175) (xy 65.028124 79.214343)
(xy 64.927885 79.267921) (xy 64.840026 79.340026) (xy 64.821963 79.362036) (xy 53.442034 90.741965) (xy 53.420027 90.760026)
(xy 53.359447 90.833841) (xy 53.342977 90.850311) (xy 53.27436 90.953004) (xy 53.227095 91.067111) (xy 53.203 91.188246)
(xy 51.870918 91.188246) (xy 51.869756 91.176451) (xy 51.848303 91.105728) (xy 51.813464 91.04055) (xy 51.766579 90.983421)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(xy 51.70945 90.936536) (xy 51.644272 90.901697) (xy 51.573549 90.880244) (xy 51.5 90.873) (xy 51.129019 90.873)
(xy 51.045 90.864725) (xy 50.960981 90.873) (xy 47.25 90.873) (xy 47.176451 90.880244) (xy 47.105728 90.901697)
(xy 47.04055 90.936536) (xy 47.014959 90.957539) (xy 45.995666 89.938246) (xy 49.373 89.938246) (xy 49.373 90.061754)
(xy 49.397095 90.182889) (xy 49.44436 90.296996) (xy 49.512977 90.399689) (xy 49.600311 90.487023) (xy 49.703004 90.55564)
(xy 49.817111 90.602905) (xy 49.938246 90.627) (xy 50.061754 90.627) (xy 50.182889 90.602905) (xy 50.296996 90.55564)
(xy 50.339859 90.527) (xy 52.474119 90.527) (xy 52.5 90.529549) (xy 52.525881 90.527) (xy 52.60331 90.519374)
(xy 52.70265 90.489239) (xy 52.794202 90.440304) (xy 52.874448 90.374448) (xy 52.890955 90.354334) (xy 64.604339 78.640951)
(xy 64.624448 78.624448) (xy 64.690304 78.544202) (xy 64.739239 78.45265) (xy 64.769374 78.35331) (xy 64.777 78.275881)
(xy 64.777 78.275879) (xy 64.779549 78.250001) (xy 64.777 78.224123) (xy 64.777 77.839875) (xy 64.80564 77.797012)
(xy 64.852905 77.682905) (xy 64.877 77.56177) (xy 64.877 77.438262) (xy 64.852905 77.317127) (xy 64.80564 77.20302)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(xy 64.737023 77.100327) (xy 64.649689 77.012993) (xy 64.546996 76.944376) (xy 64.432889 76.897111) (xy 64.311754 76.873016)
(xy 64.188246 76.873016) (xy 64.067111 76.897111) (xy 63.953004 76.944376) (xy 63.850311 77.012993) (xy 63.762977 77.100327)
(xy 63.69436 77.20302) (xy 63.647095 77.317127) (xy 63.623 77.438262) (xy 63.623 77.56177) (xy 63.647095 77.682905)
(xy 63.69436 77.797012) (xy 63.723 77.839875) (xy 63.723 78.03171) (xy 52.281711 89.473) (xy 50.339859 89.473)
(xy 50.296996 89.44436) (xy 50.182889 89.397095) (xy 50.061754 89.373) (xy 49.938246 89.373) (xy 49.817111 89.397095)
(xy 49.703004 89.44436) (xy 49.600311 89.512977) (xy 49.512977 89.600311) (xy 49.44436 89.703004) (xy 49.397095 89.817111)
(xy 49.373 89.938246) (xy 45.995666 89.938246) (xy 45.123973 89.066553) (xy 45.196863 89.059374) (xy 45.296203 89.029239)
(xy 45.387755 88.980304) (xy 45.468001 88.914448) (xy 45.484508 88.894334) (xy 45.964338 88.414505) (xy 45.984447 88.398002)
(xy 46.050303 88.317756) (xy 46.099238 88.226204) (xy 46.129373 88.126864) (xy 46.134161 88.078246) (xy 49.263 88.078246)
(xy 49.263 88.201754) (xy 49.287095 88.322889) (xy 49.33436 88.436996) (xy 49.402977 88.539689) (xy 49.490311 88.627023)
(xy 49.593004 88.69564) (xy 49.707111 88.742905) (xy 49.828246 88.767) (xy 49.951754 88.767) (xy 50.072889 88.742905)
(xy 50.186996 88.69564) (xy 50.229859 88.667) (xy 50.764119 88.667) (xy 50.79 88.669549) (xy 50.815881 88.667)
(xy 50.89331 88.659374) (xy 50.99265 88.629239) (xy 51.084202 88.580304) (xy 51.164448 88.514448) (xy 51.180955 88.494334)
(xy 55.14829 84.527) (xy 56.334119 84.527) (xy 56.36 84.529549) (xy 56.385881 84.527) (xy 56.46331 84.519374)
(xy 56.56265 84.489239) (xy 56.654202 84.440304) (xy 56.734448 84.374448) (xy 56.750955 84.354334) (xy 60.154345 80.950946)
(xy 60.174448 80.934448) (xy 60.240304 80.854202) (xy 60.289239 80.76265) (xy 60.319374 80.66331) (xy 60.327 80.585881)
(xy 60.327 80.58588) (xy 60.329549 80.56) (xy 60.327 80.534119) (xy 60.327 80.309859) (xy 60.35564 80.266996)
(xy 60.402905 80.152889) (xy 60.427 80.031754) (xy 60.427 79.908246) (xy 60.402905 79.787111) (xy 60.35564 79.673004)
(xy 60.287023 79.570311) (xy 60.199689 79.482977) (xy 60.096996 79.41436) (xy 59.982889 79.367095) (xy 59.861754 79.343)
(xy 59.738246 79.343) (xy 59.617111 79.367095) (xy 59.503004 79.41436) (xy 59.400311 79.482977) (xy 59.312977 79.570311)
(xy 59.24436 79.673004) (xy 59.197095 79.787111) (xy 59.173 79.908246) (xy 59.173 80.031754) (xy 59.197095 80.152889)
(xy 59.24436 80.266996) (xy 59.273 80.309859) (xy 59.273 80.341709) (xy 56.141711 83.473) (xy 54.95588 83.473)
(xy 54.929999 83.470451) (xy 54.82669 83.480626) (xy 54.72735 83.510761) (xy 54.635798 83.559696) (xy 54.555552 83.625552)
(xy 54.539049 83.645661) (xy 50.571711 87.613) (xy 50.229859 87.613) (xy 50.186996 87.58436) (xy 50.072889 87.537095)
(xy 49.951754 87.513) (xy 49.828246 87.513) (xy 49.707111 87.537095) (xy 49.593004 87.58436) (xy 49.490311 87.652977)
(xy 49.402977 87.740311) (xy 49.33436 87.843004) (xy 49.287095 87.957111) (xy 49.263 88.078246) (xy 46.134161 88.078246)
(xy 46.136999 88.049435) (xy 46.139548 88.023554) (xy 46.136999 87.997673) (xy 46.136999 84.900876) (xy 46.139548 84.874998)
(xy 46.136999 84.849118) (xy 46.129373 84.771689) (xy 46.099238 84.672349) (xy 46.050303 84.580797) (xy 45.984447 84.500551)
(xy 45.964338 84.484048) (xy 40.342962 78.862673) (xy 40.332905 78.812111) (xy 40.28564 78.698004) (xy 40.217023 78.595311)
(xy 40.129689 78.507977) (xy 40.026996 78.43936) (xy 39.912889 78.392095) (xy 39.791754 78.368) (xy 39.668246 78.368)
(xy 39.547111 78.392095) (xy 39.433004 78.43936) (xy 39.330311 78.507977) (xy 39.242977 78.595311) (xy 39.17436 78.698004)
(xy 39.127095 78.812111) (xy 39.103 78.933246) (xy 39.103 79.056754) (xy 39.127095 79.177889) (xy 39.17436 79.291996)
(xy 39.242977 79.394689) (xy 39.330311 79.482023) (xy 39.433004 79.55064) (xy 39.547111 79.597905) (xy 39.597673 79.607962)
(xy 45.082999 85.093289) (xy 45.083 87.805263) (xy 44.942886 87.945378) (xy 44.922889 87.937095) (xy 44.801754 87.913)
(xy 44.678246 87.913) (xy 44.557111 87.937095) (xy 44.443004 87.98436) (xy 44.340311 88.052977) (xy 44.252977 88.140311)
(xy 44.230849 88.173429) (xy 40.927 84.86958) (xy 40.927 84.533251) (xy 40.930275 84.5) (xy 40.927 84.466748)
(xy 40.927 83.533252) (xy 40.930275 83.5) (xy 40.917204 83.367285) (xy 40.878492 83.23967) (xy 40.815628 83.122059)
(xy 40.731027 83.018973) (xy 40.627941 82.934372) (xy 40.51033 82.871508) (xy 40.382715 82.832796) (xy 40.283252 82.823)
(xy 40.25 82.819725) (xy 40.216748 82.823) (xy 39.283252 82.823) (xy 39.25 82.819725) (xy 39.216748 82.823)
(xy 39.117285 82.832796) (xy 38.98967 82.871508) (xy 38.872059 82.934372) (xy 38.768973 83.018973) (xy 38.684372 83.122059)
(xy 38.621508 83.23967) (xy 38.582796 83.367285) (xy 38.569725 83.5) (xy 38.573 83.533253) (xy 38.573001 84.466738)
(xy 38.569725 84.5) (xy 38.582796 84.632715) (xy 38.621508 84.76033) (xy 38.684372 84.877941) (xy 38.768973 84.981027)
(xy 38.872059 85.065628) (xy 38.98967 85.128492) (xy 39.117285 85.167204) (xy 39.216748 85.177) (xy 39.25 85.180275)
(xy 39.283252 85.177) (xy 39.572385 85.177) (xy 39.573 85.183247) (xy 39.573 85.183254) (xy 39.582796 85.282717)
(xy 39.621508 85.410332) (xy 39.639697 85.44436) (xy 39.684372 85.527942) (xy 39.747776 85.6052) (xy 39.747779 85.605203)
(xy 39.768974 85.631029) (xy 39.7948 85.652224) (xy 46.054709 91.912133) (xy 45.733421 92.233421) (xy 45.713577 92.257601)
(xy 45.654448 92.185552) (xy 45.634339 92.169049) (xy 38.257 84.791711) (xy 38.257 76.448246) (xy 38.483 76.448246)
(xy 38.483 76.571754) (xy 38.507095 76.692889) (xy 38.55436 76.806996) (xy 38.622977 76.909689) (xy 38.710311 76.997023)
(xy 38.813004 77.06564) (xy 38.927111 77.112905) (xy 39.048246 77.137) (xy 39.171754 77.137) (xy 39.292889 77.112905)
(xy 39.406996 77.06564) (xy 39.449859 77.037) (xy 40.175107 77.037) (xy 40.203004 77.05564) (xy 40.317111 77.102905)
(xy 40.438246 77.127) (xy 40.561754 77.127) (xy 40.682889 77.102905) (xy 40.796996 77.05564) (xy 40.899689 76.987023)
(xy 40.987023 76.899689) (xy 41.05564 76.796996) (xy 41.102905 76.682889) (xy 41.127 76.561754) (xy 41.127 76.438246)
(xy 41.118618 76.396105) (xy 41.163955 76.426398) (xy 41.448667 76.544329) (xy 41.750915 76.60445) (xy 42.059085 76.60445)
(xy 42.361333 76.544329) (xy 42.646045 76.426398) (xy 42.902279 76.255188) (xy 43.120188 76.037279) (xy 43.291398 75.781045)
(xy 43.409329 75.496333) (xy 43.46945 75.194085) (xy 43.46945 74.885915) (xy 43.409329 74.583667) (xy 43.291398 74.298955)
(xy 43.154594 74.094213) (xy 43.253941 74.19356) (xy 43.396811 74.289023) (xy 43.555559 74.354778) (xy 43.724086 74.3883)
(xy 43.895914 74.3883) (xy 44.064441 74.354778) (xy 44.223189 74.289023) (xy 44.366059 74.19356) (xy 44.48756 74.072059)
(xy 44.583023 73.929189) (xy 44.648778 73.770441) (xy 44.6823 73.601914) (xy 44.6823 73.430086) (xy 44.648778 73.261559)
(xy 44.583023 73.102811) (xy 44.48756 72.959941) (xy 44.366059 72.83844) (xy 44.223189 72.742977) (xy 44.064441 72.677222)
(xy 43.895914 72.6437) (xy 43.724086 72.6437) (xy 43.555559 72.677222) (xy 43.396811 72.742977) (xy 43.253941 72.83844)
(xy 43.13244 72.959941) (xy 43.036977 73.102811) (xy 42.971222 73.261559) (xy 42.9377 73.430086) (xy 42.9377 73.601914)
(xy 42.971222 73.770441) (xy 43.036977 73.929189) (xy 43.098034 74.020567) (xy 42.902279 73.824812) (xy 42.646045 73.653602)
(xy 42.361333 73.535671) (xy 42.059085 73.47555) (xy 41.750915 73.47555) (xy 41.448667 73.535671) (xy 41.163955 73.653602)
(xy 40.907721 73.824812) (xy 40.689812 74.042721) (xy 40.518602 74.298955) (xy 40.400671 74.583667) (xy 40.34055 74.885915)
(xy 40.34055 75.194085) (xy 40.400671 75.496333) (xy 40.518602 75.781045) (xy 40.582848 75.877196) (xy 40.561754 75.873)
(xy 40.438246 75.873) (xy 40.317111 75.897095) (xy 40.203004 75.94436) (xy 40.145175 75.983) (xy 39.449859 75.983)
(xy 39.406996 75.95436) (xy 39.292889 75.907095) (xy 39.171754 75.883) (xy 39.048246 75.883) (xy 38.927111 75.907095)
(xy 38.813004 75.95436) (xy 38.710311 76.022977) (xy 38.622977 76.110311) (xy 38.55436 76.213004) (xy 38.507095 76.327111)
(xy 38.483 76.448246) (xy 38.257 76.448246) (xy 38.257 71.279859) (xy 38.28564 71.236996) (xy 38.332905 71.122889)
(xy 38.357 71.001754) (xy 38.357 70.878246) (xy 38.344683 70.816324) (xy 38.75625 70.816324) (xy 38.872831 70.804842)
(xy 38.984932 70.770836) (xy 39.088244 70.715615) (xy 39.178799 70.641299) (xy 39.253115 70.550744) (xy 39.308336 70.447432)
(xy 39.342342 70.335331) (xy 39.353824 70.21875) (xy 39.353824 69.805915) (xy 40.34055 69.805915) (xy 40.34055 70.114085)
(xy 40.400671 70.416333) (xy 40.518602 70.701045) (xy 40.689812 70.957279) (xy 40.907721 71.175188) (xy 41.163955 71.346398)
(xy 41.448667 71.464329) (xy 41.750915 71.52445) (xy 42.059085 71.52445) (xy 42.361333 71.464329) (xy 42.646045 71.346398)
(xy 42.902279 71.175188) (xy 43.098034 70.979433) (xy 43.036977 71.070811) (xy 42.971222 71.229559) (xy 42.9377 71.398086)
(xy 42.9377 71.569914) (xy 42.971222 71.738441) (xy 43.036977 71.897189) (xy 43.13244 72.040059) (xy 43.253941 72.16156)
(xy 43.396811 72.257023) (xy 43.555559 72.322778) (xy 43.724086 72.3563) (xy 43.895914 72.3563) (xy 44.064441 72.322778)
(xy 44.223189 72.257023) (xy 44.366059 72.16156) (xy 44.48756 72.040059) (xy 44.583023 71.897189) (xy 44.648778 71.738441)
(xy 44.6823 71.569914) (xy 44.6823 71.398086) (xy 44.648778 71.229559) (xy 44.583023 71.070811) (xy 44.48756 70.927941)
(xy 44.366059 70.80644) (xy 44.223189 70.710977) (xy 44.064441 70.645222) (xy 43.895914 70.6117) (xy 43.724086 70.6117)
(xy 43.555559 70.645222) (xy 43.396811 70.710977) (xy 43.253941 70.80644) (xy 43.154594 70.905787) (xy 43.291398 70.701045)
(xy 43.409329 70.416333) (xy 43.46945 70.114085) (xy 43.46945 69.805915) (xy 43.409329 69.503667) (xy 43.291398 69.218955)
(xy 43.120188 68.962721) (xy 42.902279 68.744812) (xy 42.646045 68.573602) (xy 42.361333 68.455671) (xy 42.059085 68.39555)
(xy 41.750915 68.39555) (xy 41.448667 68.455671) (xy 41.163955 68.573602) (xy 40.907721 68.744812) (xy 40.689812 68.962721)
(xy 40.518602 69.218955) (xy 40.400671 69.503667) (xy 40.34055 69.805915) (xy 39.353824 69.805915) (xy 39.353824 69.78125)
(xy 39.342342 69.664669) (xy 39.308336 69.552568) (xy 39.253115 69.449256) (xy 39.178799 69.358701) (xy 39.088244 69.284385)
(xy 38.984932 69.229164) (xy 38.929999 69.2125) (xy 38.984932 69.195836) (xy 39.088244 69.140615) (xy 39.178799 69.066299)
(xy 39.253115 68.975744) (xy 39.308336 68.872432) (xy 39.342342 68.760331) (xy 39.353824 68.64375) (xy 39.353824 68.20625)
(xy 39.342342 68.089669) (xy 39.308336 67.977568) (xy 39.253115 67.874256) (xy 39.178799 67.783701) (xy 39.088244 67.709385)
(xy 38.984932 67.654164) (xy 38.872831 67.620158) (xy 38.75625 67.608676) (xy 38.24375 67.608676) (xy 38.127169 67.620158)
(xy 38.015068 67.654164) (xy 38.004893 67.659603) (xy 37.840955 67.495666) (xy 37.824448 67.475552) (xy 37.744202 67.409696)
(xy 37.65265 67.360761) (xy 37.55331 67.330626) (xy 37.475881 67.323) (xy 37.45 67.320451) (xy 37.424119 67.323)
(xy 34.103713 67.323) (xy 33.992889 67.277095) (xy 33.871754 67.253) (xy 33.748246 67.253) (xy 33.627111 67.277095)
(xy 33.513004 67.32436) (xy 33.410311 67.392977) (xy 33.322977 67.480311) (xy 33.25436 67.583004) (xy 33.207095 67.697111)
(xy 33.197038 67.747673) (xy 33.184211 67.7605) (xy 32.765806 67.7605) (xy 32.753115 67.736756) (xy 32.678799 67.646201)
(xy 32.588244 67.571885) (xy 32.484932 67.516664) (xy 32.429999 67.5) (xy 32.484932 67.483336) (xy 32.588244 67.428115)
(xy 32.678799 67.353799) (xy 32.753115 67.263244) (xy 32.808336 67.159932) (xy 32.842342 67.047831) (xy 32.853824 66.93125)
(xy 32.853824 66.498246) (xy 39.103 66.498246) (xy 39.103 66.621754) (xy 39.127095 66.742889) (xy 39.17436 66.856996)
(xy 39.242977 66.959689) (xy 39.330311 67.047023) (xy 39.433004 67.11564) (xy 39.547111 67.162905) (xy 39.641806 67.181741)
(xy 40.297607 67.837543) (xy 40.313316 67.856684) (xy 40.332456 67.872392) (xy 40.332464 67.8724) (xy 40.389754 67.919417)
(xy 40.431545 67.941754) (xy 40.476964 67.966031) (xy 40.571591 67.994736) (xy 40.645347 68.002) (xy 40.645357 68.002)
(xy 40.67 68.004427) (xy 40.694643 68.002) (xy 43.092726 68.002) (xy 43.173004 68.05564) (xy 43.287111 68.102905)
(xy 43.408246 68.127) (xy 43.531754 68.127) (xy 43.652889 68.102905) (xy 43.766996 68.05564) (xy 43.869689 67.987023)
(xy 43.957023 67.899689) (xy 44.02564 67.796996) (xy 44.072905 67.682889) (xy 44.097 67.561754) (xy 44.097 67.438246)
(xy 44.072905 67.317111) (xy 44.02564 67.203004) (xy 43.957023 67.100311) (xy 43.869689 67.012977) (xy 43.766996 66.94436)
(xy 43.652889 66.897095) (xy 43.531754 66.873) (xy 43.408246 66.873) (xy 43.287111 66.897095) (xy 43.173004 66.94436)
(xy 43.092726 66.998) (xy 40.877936 66.998) (xy 40.351741 66.471806) (xy 40.332905 66.377111) (xy 40.28564 66.263004)
(xy 40.217023 66.160311) (xy 40.129689 66.072977) (xy 40.026996 66.00436) (xy 39.912889 65.957095) (xy 39.791754 65.933)
(xy 39.668246 65.933) (xy 39.547111 65.957095) (xy 39.433004 66.00436) (xy 39.330311 66.072977) (xy 39.242977 66.160311)
(xy 39.17436 66.263004) (xy 39.127095 66.377111) (xy 39.103 66.498246) (xy 32.853824 66.498246) (xy 32.853824 66.49375)
(xy 32.842342 66.377169) (xy 32.808336 66.265068) (xy 32.753115 66.161756) (xy 32.678799 66.071201) (xy 32.62494 66.027)
(xy 33.910141 66.027) (xy 33.953004 66.05564) (xy 34.067111 66.102905) (xy 34.188246 66.127) (xy 34.311754 66.127)
(xy 34.432889 66.102905) (xy 34.546996 66.05564) (xy 34.649689 65.987023) (xy 34.737023 65.899689) (xy 34.80564 65.796996)
(xy 34.852905 65.682889) (xy 34.877 65.561754) (xy 34.877 65.438246) (xy 34.852905 65.317111) (xy 34.80564 65.203004)
(xy 34.737023 65.100311) (xy 34.649689 65.012977) (xy 34.546996 64.94436) (xy 34.432889 64.897095) (xy 34.311754 64.873)
(xy 34.188246 64.873) (xy 34.067111 64.897095) (xy 33.953004 64.94436) (xy 33.910141 64.973) (xy 32.339859 64.973)
(xy 32.296996 64.94436) (xy 32.182889 64.897095) (xy 32.061754 64.873) (xy 31.938246 64.873) (xy 31.817111 64.897095)
(xy 31.703004 64.94436) (xy 31.600311 65.012977) (xy 31.512977 65.100311) (xy 31.44436 65.203004) (xy 31.397095 65.317111)
(xy 31.373 65.438246) (xy 31.373 65.561754) (xy 31.397095 65.682889) (xy 31.44436 65.796996) (xy 31.473 65.839859)
(xy 31.473 65.964149) (xy 31.411756 65.996885) (xy 31.321201 66.071201) (xy 31.246885 66.161756) (xy 31.191664 66.265068)
(xy 31.157658 66.377169) (xy 31.146176 66.49375) (xy 21.527 66.49375) (xy 21.527 65.907876) (xy 21.529549 65.881995)
(xy 21.519374 65.778686) (xy 21.489239 65.679346) (xy 21.440304 65.587794) (xy 21.433394 65.579374) (xy 21.374448 65.507548)
(xy 21.354339 65.491045) (xy 19.897 64.033707) (xy 19.897 61.818975) (xy 19.905157 61.859983) (xy 19.987851 62.059624)
(xy 20.107904 62.239297) (xy 20.260703 62.392096) (xy 20.440376 62.512149) (xy 20.640017 62.594843) (xy 20.851955 62.637)
(xy 21.068045 62.637) (xy 21.279983 62.594843) (xy 21.479624 62.512149) (xy 21.659297 62.392096) (xy 21.812096 62.239297)
(xy 21.927221 62.067) (xy 47.174119 62.067) (xy 47.2 62.069549) (xy 47.225881 62.067) (xy 47.30331 62.059374)
(xy 47.40265 62.029239) (xy 47.494202 61.980304) (xy 47.574448 61.914448) (xy 47.590955 61.894334) (xy 48.606138 60.879151)
(xy 51.113 60.879151) (xy 51.113 61.120849) (xy 51.160153 61.357903) (xy 51.252647 61.581202) (xy 51.386927 61.782167)
(xy 51.557833 61.953073) (xy 51.758798 62.087353) (xy 51.982097 62.179847) (xy 52.219151 62.227) (xy 52.460849 62.227)
(xy 52.697903 62.179847) (xy 52.752105 62.157396) (xy 53.033 62.438291) (xy 53.033 62.527348) (xy 52.921202 62.452647)
(xy 52.697903 62.360153) (xy 52.460849 62.313) (xy 52.219151 62.313) (xy 51.982097 62.360153) (xy 51.758798 62.452647)
(xy 51.557833 62.586927) (xy 51.386927 62.757833) (xy 51.252647 62.958798) (xy 51.160153 63.182097) (xy 51.113 63.419151)
(xy 51.113 63.660849) (xy 51.160153 63.897903) (xy 51.252647 64.121202) (xy 51.386927 64.322167) (xy 51.557833 64.493073)
(xy 51.758798 64.627353) (xy 51.982097 64.719847) (xy 52.219151 64.767) (xy 52.460849 64.767) (xy 52.697903 64.719847)
(xy 52.921202 64.627353) (xy 53.033001 64.552652) (xy 53.033001 65.034109) (xy 53.030451 65.06) (xy 53.040626 65.163309)
(xy 53.070761 65.262649) (xy 53.119696 65.354201) (xy 53.126607 65.362622) (xy 53.185553 65.434448) (xy 53.205662 65.450951)
(xy 57.387038 69.632328) (xy 57.397095 69.682889) (xy 57.44436 69.796996) (xy 57.512977 69.899689) (xy 57.600311 69.987023)
(xy 57.703004 70.05564) (xy 57.817111 70.102905) (xy 57.938246 70.127) (xy 58.061754 70.127) (xy 58.182889 70.102905)
(xy 58.296996 70.05564) (xy 58.399689 69.987023) (xy 58.487023 69.899689) (xy 58.55564 69.796996) (xy 58.602905 69.682889)
(xy 58.627 69.561754) (xy 58.627 69.438246) (xy 58.602905 69.317111) (xy 58.55564 69.203004) (xy 58.487023 69.100311)
(xy 58.399689 69.012977) (xy 58.296996 68.94436) (xy 58.182889 68.897095) (xy 58.132328 68.887038) (xy 54.087 64.841711)
(xy 54.087 64.48224) (xy 54.097833 64.493073) (xy 54.298798 64.627353) (xy 54.522097 64.719847) (xy 54.759151 64.767)
(xy 55.000849 64.767) (xy 55.237903 64.719847) (xy 55.461202 64.627353) (xy 55.603001 64.532607) (xy 55.603001 65.624109)
(xy 55.600451 65.65) (xy 55.610626 65.753309) (xy 55.640761 65.852649) (xy 55.670164 65.907658) (xy 55.689697 65.944202)
(xy 55.755553 66.024448) (xy 55.775662 66.040951) (xy 57.387038 67.652328) (xy 57.397095 67.702889) (xy 57.44436 67.816996)
(xy 57.512977 67.919689) (xy 57.600311 68.007023) (xy 57.703004 68.07564) (xy 57.817111 68.122905) (xy 57.938246 68.147)
(xy 58.061754 68.147) (xy 58.182889 68.122905) (xy 58.296996 68.07564) (xy 58.399689 68.007023) (xy 58.487023 67.919689)
(xy 58.55564 67.816996) (xy 58.602905 67.702889) (xy 58.627 67.581754) (xy 58.627 67.458246) (xy 58.602905 67.337111)
(xy 58.55564 67.223004) (xy 58.487023 67.120311) (xy 58.399689 67.032977) (xy 58.296996 66.96436) (xy 58.182889 66.917095)
(xy 58.132328 66.907038) (xy 56.657 65.431711) (xy 56.657 64.50588) (xy 56.838798 64.627353) (xy 57.062097 64.719847)
(xy 57.299151 64.767) (xy 57.540849 64.767) (xy 57.777903 64.719847) (xy 58.001202 64.627353) (xy 58.202167 64.493073)
(xy 58.373073 64.322167) (xy 58.507353 64.121202) (xy 58.599847 63.897903) (xy 58.647 63.660849) (xy 58.647 63.419151)
(xy 58.599847 63.182097) (xy 58.507353 62.958798) (xy 58.373073 62.757833) (xy 58.202167 62.586927) (xy 58.001202 62.452647)
(xy 57.777903 62.360153) (xy 57.540849 62.313) (xy 57.299151 62.313) (xy 57.062097 62.360153) (xy 56.838798 62.452647)
(xy 56.657 62.57412) (xy 56.657 62.275881) (xy 56.659549 62.25) (xy 56.649374 62.14669) (xy 56.622962 62.059624)
(xy 56.619239 62.04735) (xy 56.570304 61.955798) (xy 56.504448 61.875552) (xy 56.484339 61.859049) (xy 56.037395 61.412106)
(xy 56.059847 61.357903) (xy 56.107 61.120849) (xy 56.107 60.879151) (xy 56.059847 60.642097) (xy 55.967353 60.418798)
(xy 55.833073 60.217833) (xy 55.662167 60.046927) (xy 55.461202 59.912647) (xy 55.237903 59.820153) (xy 55.000849 59.773)
(xy 54.759151 59.773) (xy 54.522097 59.820153) (xy 54.298798 59.912647) (xy 54.097833 60.046927) (xy 53.926927 60.217833)
(xy 53.792647 60.418798) (xy 53.700153 60.642097) (xy 53.653 60.879151) (xy 53.653 61.120849) (xy 53.700153 61.357903)
(xy 53.792647 61.581202) (xy 53.926927 61.782167) (xy 54.097833 61.953073) (xy 54.298798 62.087353) (xy 54.522097 62.179847)
(xy 54.759151 62.227) (xy 55.000849 62.227) (xy 55.237903 62.179847) (xy 55.292106 62.157395) (xy 55.603 62.46829)
(xy 55.603 62.547393) (xy 55.461202 62.452647) (xy 55.237903 62.360153) (xy 55.000849 62.313) (xy 54.759151 62.313)
(xy 54.522097 62.360153) (xy 54.298798 62.452647) (xy 54.097833 62.586927) (xy 54.087 62.59776) (xy 54.087 62.245881)
(xy 54.089549 62.22) (xy 54.079374 62.11669) (xy 54.049239 62.01735) (xy 54.000304 61.925798) (xy 53.934448 61.845552)
(xy 53.914344 61.829053) (xy 53.497396 61.412105) (xy 53.519847 61.357903) (xy 53.567 61.120849) (xy 53.567 60.879151)
(xy 53.519847 60.642097) (xy 53.427353 60.418798) (xy 53.293073 60.217833) (xy 53.122167 60.046927) (xy 52.921202 59.912647)
(xy 52.697903 59.820153) (xy 52.460849 59.773) (xy 52.219151 59.773) (xy 51.982097 59.820153) (xy 51.758798 59.912647)
(xy 51.557833 60.046927) (xy 51.386927 60.217833) (xy 51.252647 60.418798) (xy 51.160153 60.642097) (xy 51.113 60.879151)
(xy 48.606138 60.879151) (xy 49.76829 59.717) (xy 55.391711 59.717) (xy 56.262604 60.587895) (xy 56.240153 60.642097)
(xy 56.193 60.879151) (xy 56.193 61.120849) (xy 56.240153 61.357903) (xy 56.332647 61.581202) (xy 56.466927 61.782167)
(xy 56.637833 61.953073) (xy 56.838798 62.087353) (xy 57.062097 62.179847) (xy 57.299151 62.227) (xy 57.540849 62.227)
(xy 57.777903 62.179847) (xy 58.001202 62.087353) (xy 58.202167 61.953073) (xy 58.373073 61.782167) (xy 58.507353 61.581202)
(xy 58.599847 61.357903) (xy 58.647 61.120849) (xy 58.647 60.879151) (xy 58.599847 60.642097) (xy 58.507353 60.418798)
(xy 58.373073 60.217833) (xy 58.202167 60.046927) (xy 58.001202 59.912647) (xy 57.777903 59.820153) (xy 57.540849 59.773)
(xy 57.299151 59.773) (xy 57.062097 59.820153) (xy 57.007895 59.842604) (xy 56.000955 58.835666) (xy 55.984448 58.815552)
(xy 55.904202 58.749696) (xy 55.81265 58.700761) (xy 55.71331 58.670626) (xy 55.635881 58.663) (xy 55.61 58.660451)
(xy 55.584119 58.663) (xy 49.575881 58.663) (xy 49.55 58.660451) (xy 49.524119 58.663) (xy 49.44669 58.670626)
(xy 49.34735 58.700761) (xy 49.255798 58.749696) (xy 49.175552 58.815552) (xy 49.159049 58.835661) (xy 46.981711 61.013)
(xy 21.927221 61.013) (xy 21.812096 60.840703) (xy 21.659297 60.687904) (xy 21.479624 60.567851) (xy 21.279983 60.485157)
(xy 21.068045 60.443) (xy 20.851955 60.443) (xy 20.665127 60.480162) (xy 22.440162 58.705127) (xy 22.403 58.891955)
(xy 22.403 59.108045) (xy 22.445157 59.319983) (xy 22.527851 59.519624) (xy 22.647904 59.699297) (xy 22.800703 59.852096)
(xy 22.980376 59.972149) (xy 23.180017 60.054843) (xy 23.391955 60.097) (xy 23.608045 60.097) (xy 23.819983 60.054843)
(xy 24.019624 59.972149) (xy 24.199297 59.852096) (xy 24.352096 59.699297) (xy 24.467221 59.527) (xy 26.281711 59.527)
(xy 27.33905 60.58434) (xy 27.355553 60.604449) (xy 27.435799 60.670305) (xy 27.527351 60.71924) (xy 27.626691 60.749375)
(xy 27.73 60.75955) (xy 27.755881 60.757001) (xy 46.604118 60.757001) (xy 46.629999 60.75955) (xy 46.65588 60.757001)
(xy 46.733309 60.749375) (xy 46.832649 60.71924) (xy 46.924201 60.670305) (xy 47.004447 60.604449) (xy 47.020954 60.584335)
(xy 48.998291 58.607) (xy 56.821711 58.607) (xy 58.802604 60.587895) (xy 58.780153 60.642097) (xy 58.733 60.879151)
(xy 58.733 61.120849) (xy 58.780153 61.357903) (xy 58.872647 61.581202) (xy 59.006927 61.782167) (xy 59.177833 61.953073)
(xy 59.378798 62.087353) (xy 59.602097 62.179847) (xy 59.839151 62.227) (xy 60.080849 62.227) (xy 60.317903 62.179847)
(xy 60.372105 62.157396) (xy 60.772999 62.55829) (xy 60.772999 62.617759) (xy 60.742167 62.586927) (xy 60.541202 62.452647)
(xy 60.317903 62.360153) (xy 60.080849 62.313) (xy 59.839151 62.313) (xy 59.602097 62.360153) (xy 59.378798 62.452647)
(xy 59.177833 62.586927) (xy 59.006927 62.757833) (xy 58.872647 62.958798) (xy 58.780153 63.182097) (xy 58.733 63.419151)
(xy 58.733 63.660849) (xy 58.780153 63.897903) (xy 58.872647 64.121202) (xy 59.006927 64.322167) (xy 59.177833 64.493073)
(xy 59.378798 64.627353) (xy 59.602097 64.719847) (xy 59.839151 64.767) (xy 60.080849 64.767) (xy 60.317903 64.719847)
(xy 60.541202 64.627353) (xy 60.742167 64.493073) (xy 60.773 64.46224) (xy 60.773 64.671698) (xy 60.767922 64.677885)
(xy 60.714344 64.778124) (xy 60.681351 64.886888) (xy 60.673001 64.971664) (xy 60.673 70.010972) (xy 54.512034 76.171939)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(xy 54.490027 76.19) (xy 54.471966 76.212007) (xy 54.471963 76.21201) (xy 54.44884 76.240186) (xy 54.417922 76.277859)
(xy 54.381459 76.346077) (xy 54.364344 76.378098) (xy 54.331349 76.486863) (xy 54.32021 76.599974) (xy 54.323001 76.628315)
(xy 54.323 80.034571) (xy 54.297095 80.097111) (xy 54.273 80.218246) (xy 54.273 80.341754) (xy 54.297095 80.462889)
(xy 54.34436 80.576996) (xy 54.388808 80.643517) (xy 48.407 74.661711) (xy 48.407 63.879859) (xy 48.43564 63.836996)
(xy 48.482905 63.722889) (xy 48.507 63.601754) (xy 48.507 63.478246) (xy 48.482905 63.357111) (xy 48.43564 63.243004)
(xy 48.367023 63.140311) (xy 48.279689 63.052977) (xy 48.176996 62.98436) (xy 48.062889 62.937095) (xy 47.941754 62.913)
(xy 47.818246 62.913) (xy 47.697111 62.937095) (xy 47.583004 62.98436) (xy 47.480311 63.052977) (xy 47.392977 63.140311)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(xy 47.32436 63.243004) (xy 47.277095 63.357111) (xy 47.253 63.478246) (xy 47.253 63.601754) (xy 47.277095 63.722889)
(xy 47.32436 63.836996) (xy 47.353 63.879859) (xy 47.353001 74.854109) (xy 47.350451 74.88) (xy 47.360626 74.983309)
(xy 47.390761 75.082649) (xy 47.431944 75.159697) (xy 47.439697 75.174202) (xy 47.505553 75.254448) (xy 47.525662 75.270951)
(xy 55.137038 82.882329) (xy 55.147095 82.932889) (xy 55.19436 83.046996) (xy 55.262977 83.149689) (xy 55.350311 83.237023)
(xy 55.453004 83.30564) (xy 55.567111 83.352905) (xy 55.688246 83.377) (xy 55.811754 83.377) (xy 55.932889 83.352905)
(xy 56.046996 83.30564) (xy 56.149689 83.237023) (xy 56.237023 83.149689) (xy 56.30564 83.046996) (xy 56.352905 82.932889)
(xy 56.377 82.811754) (xy 56.377 82.688246) (xy 56.352905 82.567111) (xy 56.30564 82.453004) (xy 56.237023 82.350311)
(xy 56.149689 82.262977) (xy 56.046996 82.19436) (xy 55.932889 82.147095) (xy 55.882329 82.137038) (xy 54.536483 80.791192)
(xy 54.603004 80.83564) (xy 54.717111 80.882905) (xy 54.838246 80.907) (xy 54.961754 80.907) (xy 55.082889 80.882905)
(xy 55.196996 80.83564) (xy 55.299689 80.767023) (xy 55.387023 80.679689) (xy 55.45564 80.576996) (xy 55.502905 80.462889)
(xy 55.527 80.341754) (xy 55.527 80.218246) (xy 55.502905 80.097111) (xy 55.477 80.034571) (xy 55.477 76.838975)
(xy 55.973 76.342975) (xy 55.973001 79.620557) (xy 55.973 79.620567) (xy 55.973 79.660141) (xy 55.94436 79.703004)
(xy 55.897095 79.817111) (xy 55.873 79.938246) (xy 55.873 80.061754) (xy 55.897095 80.182889) (xy 55.94436 80.296996)
(xy 56.012977 80.399689) (xy 56.100311 80.487023) (xy 56.203004 80.55564) (xy 56.317111 80.602905) (xy 56.438246 80.627)
(xy 56.561754 80.627) (xy 56.682889 80.602905) (xy 56.796996 80.55564) (xy 56.899689 80.487023) (xy 56.987023 80.399689)
(xy 57.05564 80.296996) (xy 57.102905 80.182889) (xy 57.123 80.081861) (xy 57.123 80.623651) (xy 57.073004 80.64436)
(xy 56.970311 80.712977) (xy 56.882977 80.800311) (xy 56.81436 80.903004) (xy 56.767095 81.017111) (xy 56.743 81.138246)
(xy 56.743 81.261754) (xy 56.767095 81.382889) (xy 56.81436 81.496996) (xy 56.882977 81.599689) (xy 56.970311 81.687023)
(xy 57.073004 81.75564) (xy 57.187111 81.802905) (xy 57.308246 81.827) (xy 57.431754 81.827) (xy 57.552889 81.802905)
(xy 57.666996 81.75564) (xy 57.769689 81.687023) (xy 57.857023 81.599689) (xy 57.92564 81.496996) (xy 57.972905 81.382889)
(xy 57.982962 81.332328) (xy 58.004338 81.310951) (xy 58.024448 81.294448) (xy 58.090304 81.214202) (xy 58.139239 81.12265)
(xy 58.169374 81.02331) (xy 58.177 80.945881) (xy 58.177 80.94588) (xy 58.179549 80.92) (xy 58.177 80.894119)
(xy 58.177 79.288289) (xy 62.15829 75.307) (xy 63.650288 75.307) (xy 63.650311 75.307023) (xy 63.753004 75.37564)
(xy 63.867111 75.422905) (xy 63.988246 75.447) (xy 64.111754 75.447) (xy 64.232889 75.422905) (xy 64.346996 75.37564)
(xy 64.449689 75.307023) (xy 64.537023 75.219689) (xy 64.60564 75.116996) (xy 64.652905 75.002889) (xy 64.677 74.881754)
(xy 64.677 74.758246) (xy 64.652905 74.637111) (xy 64.60564 74.523004) (xy 64.537023 74.420311) (xy 64.449689 74.332977)
(xy 64.346996 74.26436) (xy 64.232889 74.217095) (xy 64.111754 74.193) (xy 63.988246 74.193) (xy 63.867111 74.217095)
(xy 63.780429 74.253) (xy 61.96588 74.253) (xy 61.939999 74.250451) (xy 61.83669 74.260626) (xy 61.73735 74.290761)
(xy 61.645798 74.339696) (xy 61.565552 74.405552) (xy 61.549049 74.425661) (xy 57.295662 78.679049) (xy 57.275553 78.695552)
(xy 57.223242 78.759293) (xy 57.209696 78.775799) (xy 57.160761 78.867351) (xy 57.130626 78.966691) (xy 57.120451 79.07)
(xy 57.123001 79.09589) (xy 57.123001 79.918139) (xy 57.102905 79.817111) (xy 57.05564 79.703004) (xy 57.027 79.660141)
(xy 57.027 76.458289) (xy 60.335289 73.15) (xy 65.271176 73.15) (xy 65.271176 74.85) (xy 65.278455 74.923905)
(xy 65.300012 74.99497) (xy 65.335019 75.060463) (xy 65.382131 75.117869) (xy 65.439537 75.164981) (xy 65.50503 75.199988)
(xy 65.576095 75.221545) (xy 65.65 75.228824) (xy 67.35 75.228824) (xy 67.423905 75.221545) (xy 67.49497 75.199988)
(xy 67.560463 75.164981) (xy 67.617869 75.117869) (xy 67.664981 75.060463) (xy 67.699988 74.99497) (xy 67.721545 74.923905)
(xy 67.728824 74.85) (xy 67.728824 73.15) (xy 67.721545 73.076095) (xy 67.699988 73.00503) (xy 67.664981 72.939537)
(xy 67.617869 72.882131) (xy 67.560463 72.835019) (xy 67.49497 72.800012) (xy 67.423905 72.778455) (xy 67.35 72.771176)
(xy 65.65 72.771176) (xy 65.576095 72.778455) (xy 65.50503 72.800012) (xy 65.439537 72.835019) (xy 65.382131 72.882131)
(xy 65.335019 72.939537) (xy 65.300012 73.00503) (xy 65.278455 73.076095) (xy 65.271176 73.15) (xy 60.335289 73.15)
(xy 60.472328 73.012962) (xy 60.522889 73.002905) (xy 60.636996 72.95564) (xy 60.739689 72.887023) (xy 60.827023 72.799689)
(xy 60.89564 72.696996) (xy 60.942905 72.582889) (xy 60.967 72.461754) (xy 60.967 72.338246) (xy 60.942905 72.217111)
(xy 60.89564 72.103004) (xy 60.827023 72.000311) (xy 60.739689 71.912977) (xy 60.636996 71.84436) (xy 60.522889 71.797095)
(xy 60.519546 71.79643) (xy 60.976825 71.339151) (xy 65.273 71.339151) (xy 65.273 71.580849) (xy 65.320153 71.817903)
(xy 65.412647 72.041202) (xy 65.546927 72.242167) (xy 65.717833 72.413073) (xy 65.918798 72.547353) (xy 66.142097 72.639847)
(xy 66.379151 72.687) (xy 66.620849 72.687) (xy 66.857903 72.639847) (xy 67.081202 72.547353) (xy 67.282167 72.413073)
(xy 67.453073 72.242167) (xy 67.587353 72.041202) (xy 67.679847 71.817903) (xy 67.727 71.580849) (xy 67.727 71.339151)
(xy 67.679847 71.102097) (xy 67.587353 70.878798) (xy 67.453073 70.677833) (xy 67.282167 70.506927) (xy 67.081202 70.372647)
(xy 66.857903 70.280153) (xy 66.620849 70.233) (xy 66.379151 70.233) (xy 66.142097 70.280153) (xy 65.918798 70.372647)
(xy 65.717833 70.506927) (xy 65.546927 70.677833) (xy 65.412647 70.878798) (xy 65.320153 71.102097) (xy 65.273 71.339151)
(xy 60.976825 71.339151) (xy 61.637969 70.678007) (xy 61.659974 70.659948) (xy 61.691004 70.622139) (xy 61.704302 70.605935)
(xy 61.732079 70.572089) (xy 61.785657 70.47185) (xy 61.81865 70.363086) (xy 61.827 70.27831) (xy 61.827 70.278304)
(xy 61.82979 70.249975) (xy 61.827 70.221646) (xy 61.827 64.97587) (xy 61.829548 64.950002) (xy 61.826999 64.924124)
(xy 61.826999 64.864275) (xy 61.992883 64.943371) (xy 62.276411 65.015339) (xy 62.568531 65.030611) (xy 62.858019 64.988599)
(xy 63.133747 64.890919) (xy 63.271157 64.817472) (xy 63.348792 64.568397) (xy 62.5 63.719605) (xy 62.485858 63.733748)
(xy 62.306253 63.554143) (xy 62.320395 63.54) (xy 62.679605 63.54) (xy 63.528397 64.388792) (xy 63.777472 64.311157)
(xy 63.903371 64.047117) (xy 63.975339 63.763589) (xy 63.990611 63.471469) (xy 63.948599 63.181981) (xy 63.850919 62.906253)
(xy 63.777472 62.768843) (xy 63.528397 62.691208) (xy 62.679605 63.54) (xy 62.320395 63.54) (xy 62.306253 63.525858)
(xy 62.485858 63.346253) (xy 62.5 63.360395) (xy 63.348792 62.511603) (xy 63.341443 62.488025) (xy 63.35 62.488072)
(xy 63.474482 62.475812) (xy 63.59418 62.439502) (xy 63.704494 62.380537) (xy 63.801185 62.301185) (xy 63.880537 62.204494)
(xy 63.939502 62.09418) (xy 63.975812 61.974482) (xy 63.988072 61.85) (xy 63.985 61.28575) (xy 63.82625 61.127)
(xy 62.627 61.127) (xy 62.627 61.147) (xy 62.373 61.147) (xy 62.373 61.127) (xy 62.353 61.127)
(xy 62.353 60.873) (xy 62.373 60.873) (xy 62.373 59.67375) (xy 62.627 59.67375) (xy 62.627 60.873)
(xy 63.82625 60.873) (xy 63.985 60.71425) (xy 63.988072 60.15) (xy 63.975812 60.025518) (xy 63.939502 59.90582)
(xy 63.880537 59.795506) (xy 63.801185 59.698815) (xy 63.704494 59.619463) (xy 63.59418 59.560498) (xy 63.474482 59.524188)
(xy 63.35 59.511928) (xy 62.78575 59.515) (xy 62.627 59.67375) (xy 62.373 59.67375) (xy 62.21425 59.515)
(xy 61.65 59.511928) (xy 61.525518 59.524188) (xy 61.40582 59.560498) (xy 61.295506 59.619463) (xy 61.198815 59.698815)
(xy 61.119463 59.795506) (xy 61.060498 59.90582) (xy 61.024188 60.025518) (xy 61.011928 60.15) (xy 61.013112 60.367553)
(xy 60.913073 60.217833) (xy 60.742167 60.046927) (xy 60.541202 59.912647) (xy 60.317903 59.820153) (xy 60.080849 59.773)
(xy 59.839151 59.773) (xy 59.602097 59.820153) (xy 59.547895 59.842604) (xy 57.430955 57.725666) (xy 57.414448 57.705552)
(xy 57.334202 57.639696) (xy 57.24265 57.590761) (xy 57.14331 57.560626) (xy 57.065881 57.553) (xy 57.04 57.550451)
(xy 57.014119 57.553) (xy 48.805881 57.553) (xy 48.78 57.550451) (xy 48.754119 57.553) (xy 48.67669 57.560626)
(xy 48.57735 57.590761) (xy 48.485798 57.639696) (xy 48.405552 57.705552) (xy 48.389054 57.725656) (xy 46.41171 59.703001)
(xy 27.948291 59.703001) (xy 26.890955 58.645666) (xy 26.874448 58.625552) (xy 26.794202 58.559696) (xy 26.70265 58.510761)
(xy 26.60331 58.480626) (xy 26.525881 58.473) (xy 26.5 58.470451) (xy 26.474119 58.473) (xy 24.467221 58.473)
(xy 24.352096 58.300703) (xy 24.199297 58.147904) (xy 24.019624 58.027851) (xy 23.819983 57.945157) (xy 23.608045 57.903)
(xy 23.391955 57.903) (xy 23.205127 57.940162) (xy 24.61829 56.527) (xy 27.160141 56.527) (xy 27.203004 56.55564)
(xy 27.317111 56.602905) (xy 27.438246 56.627) (xy 27.561754 56.627) (xy 27.682889 56.602905) (xy 27.796996 56.55564)
(xy 27.899689 56.487023) (xy 27.987023 56.399689) (xy 28.05564 56.296996) (xy 28.102905 56.182889) (xy 28.127 56.061754)
(xy 28.127 55.938246) (xy 28.102905 55.817111) (xy 28.05564 55.703004) (xy 27.987023 55.600311) (xy 27.899689 55.512977)
(xy 27.796996 55.44436) (xy 27.682889 55.397095) (xy 27.561754 55.373) (xy 27.438246 55.373) (xy 27.317111 55.397095)
(xy 27.203004 55.44436) (xy 27.160141 55.473) (xy 24.42588 55.473) (xy 24.399999 55.470451) (xy 24.29669 55.480626)
(xy 24.19735 55.510761) (xy 24.105798 55.559696) (xy 24.025552 55.625552) (xy 24.009049 55.645661) (xy 19.015662 60.639049)
(xy 18.995553 60.655552) (xy 18.947381 60.71425) (xy 18.929696 60.735799) (xy 18.880761 60.827351) (xy 18.850626 60.926691)
(xy 18.840451 61.03) (xy 18.843001 61.055891) (xy 18.843 64.226115) (xy 18.840451 64.251996) (xy 18.843 64.277876)
(xy 18.850626 64.355305) (xy 18.880761 64.454645) (xy 18.929696 64.546198) (xy 18.995552 64.626444) (xy 19.015666 64.642951)
(xy 20.473001 66.100287) (xy 20.473 75.90047) (xy 20.466027 75.891973) (xy 20.440192 75.87077) (xy 20.338598 75.769176)
(xy 20.26134 75.705772) (xy 20.143729 75.642908) (xy 20.016114 75.604196) (xy 19.8834 75.591126) (xy 19.750686 75.604196)
(xy 19.623071 75.642908) (xy 19.50546 75.705772) (xy 19.402373 75.790373) (xy 19.317772 75.89346) (xy 19.254908 76.011071)
(xy 19.216196 76.138686) (xy 19.203126 76.2714) (xy 19.216196 76.404114) (xy 19.254908 76.531729) (xy 19.308001 76.63106)
(xy 19.308 81.521355) (xy 19.304726 81.5546) (xy 19.308 81.587845) (xy 19.308 81.587851) (xy 19.317537 81.684684)
(xy 19.317796 81.687314) (xy 19.356508 81.814929) (xy 19.419372 81.93254) (xy 19.482001 82.008853) (xy 19.503973 82.035626)
(xy 19.5298 82.056822) (xy 23.283001 85.810024) (xy 23.283 87.993251) (xy 23.283001 87.993261) (xy 23.283 89.316657)
(xy 23.177833 89.386927) (xy 23.006927 89.557833) (xy 22.872647 89.758798) (xy 22.83984 89.838) (xy 21.19464 89.838)
(xy 21.169997 89.835573) (xy 21.145354 89.838) (xy 21.145345 89.838) (xy 21.071589 89.845264) (xy 20.976962 89.873969)
(xy 20.889753 89.920583) (xy 20.813314 89.983316) (xy 20.797601 90.002462) (xy 18.162463 92.637601) (xy 18.143317 92.653314)
(xy 18.127604 92.67246) (xy 18.127601 92.672463) (xy 18.080584 92.729753) (xy 18.03397 92.816962) (xy 18.005265 92.911589)
(xy 17.995573 93.009998) (xy 17.998001 93.034651) (xy 17.998 94.225347) (xy 17.995572 94.25) (xy 17.127 94.25)
(xy 17.127 77.894756) (xy 17.244189 77.943297) (xy 17.413623 77.977) (xy 17.586377 77.977) (xy 17.755811 77.943297)
(xy 17.915415 77.877187) (xy 18.059055 77.78121) (xy 18.18121 77.659055) (xy 18.277187 77.515415) (xy 18.343297 77.355811)
(xy 18.377 77.186377) (xy 18.377 77.013623) (xy 18.343297 76.844189) (xy 18.277187 76.684585) (xy 18.18121 76.540945)
(xy 18.059055 76.41879) (xy 17.915415 76.322813) (xy 17.755811 76.256703) (xy 17.586377 76.223) (xy 17.413623 76.223)
(xy 17.244189 76.256703) (xy 17.127 76.305244) (xy 17.127 69.894756) (xy 17.244189 69.943297) (xy 17.413623 69.977)
(xy 17.586377 69.977) (xy 17.755811 69.943297) (xy 17.915415 69.877187) (xy 18.059055 69.78121) (xy 18.18121 69.659055)
(xy 18.277187 69.515415) (xy 18.343297 69.355811) (xy 18.377 69.186377) (xy 18.377 69.013623) (xy 18.343297 68.844189)
(xy 18.277187 68.684585) (xy 18.18121 68.540945) (xy 18.059055 68.41879) (xy 17.915415 68.322813) (xy 17.755811 68.256703)
(xy 17.586377 68.223) (xy 17.413623 68.223) (xy 17.244189 68.256703) (xy 17.127 68.305244) (xy 17.127 59.93556)
(xy 17.664045 59.93556) (xy 17.725932 60.171368) (xy 17.96779 60.284266) (xy 18.227027 60.347811) (xy 18.49368 60.359561)
(xy 18.757501 60.319063) (xy 19.008353 60.227875) (xy 19.114068 60.171368) (xy 19.175955 59.93556) (xy 18.42 59.179605)
(xy 17.664045 59.93556) (xy 17.127 59.93556) (xy 17.127 59.409199) (xy 17.192125 59.588353) (xy 17.248632 59.694068)
(xy 17.48444 59.755955) (xy 18.240395 59) (xy 18.599605 59) (xy 19.35556 59.755955) (xy 19.591368 59.694068)
(xy 19.704266 59.45221) (xy 19.767811 59.192973) (xy 19.779561 58.92632) (xy 19.739063 58.662499) (xy 19.647875 58.411647)
(xy 19.591368 58.305932) (xy 19.35556 58.244045) (xy 18.599605 59) (xy 18.240395 59) (xy 17.48444 58.244045)
(xy 17.248632 58.305932) (xy 17.135734 58.54779) (xy 17.127 58.583421) (xy 17.127 58.06444) (xy 17.664045 58.06444)
(xy 18.42 58.820395) (xy 19.175955 58.06444) (xy 19.114068 57.828632) (xy 18.87221 57.715734) (xy 18.612973 57.652189)
(xy 18.34632 57.640439) (xy 18.082499 57.680937) (xy 17.831647 57.772125) (xy 17.725932 57.828632) (xy 17.664045 58.06444)
(xy 17.127 58.06444) (xy 17.127 55.849604) (xy 19.473 55.849604) (xy 19.473 56.150396) (xy 19.531681 56.44541)
(xy 19.64679 56.723306) (xy 19.813901 56.973406) (xy 20.026594 57.186099) (xy 20.276694 57.35321) (xy 20.55459 57.468319)
(xy 20.849604 57.527) (xy 21.150396 57.527) (xy 21.44541 57.468319) (xy 21.723306 57.35321) (xy 21.973406 57.186099)
(xy 22.186099 56.973406) (xy 22.35321 56.723306) (xy 22.468319 56.44541) (xy 22.527 56.150396) (xy 22.527 55.849604)
(xy 22.468319 55.55459) (xy 22.35321 55.276694) (xy 22.186099 55.026594) (xy 21.973406 54.813901) (xy 21.723306 54.64679)
(xy 21.44541 54.531681) (xy 21.150396 54.473) (xy 20.849604 54.473) (xy 20.55459 54.531681) (xy 20.276694 54.64679)
(xy 20.026594 54.813901) (xy 19.813901 55.026594) (xy 19.64679 55.276694) (xy 19.531681 55.55459) (xy 19.473 55.849604)
(xy 17.127 55.849604) (xy 17.127 51.849604) (xy 19.473 51.849604) (xy 19.473 52.150396) (xy 19.531681 52.44541)
(xy 19.64679 52.723306) (xy 19.813901 52.973406) (xy 20.026594 53.186099) (xy 20.276694 53.35321) (xy 20.55459 53.468319)
(xy 20.849604 53.527) (xy 21.150396 53.527) (xy 21.44541 53.468319) (xy 21.723306 53.35321) (xy 21.973406 53.186099)
(xy 22.186099 52.973406) (xy 22.35321 52.723306) (xy 22.468319 52.44541) (xy 22.527 52.150396) (xy 22.527 51.938246)
(xy 26.373 51.938246) (xy 26.373 52.061754) (xy 26.397095 52.182889) (xy 26.44436 52.296996) (xy 26.512977 52.399689)
(xy 26.600311 52.487023) (xy 26.703004 52.55564) (xy 26.817111 52.602905) (xy 26.938246 52.627) (xy 27.061754 52.627)
(xy 27.182889 52.602905) (xy 27.296996 52.55564) (xy 27.339859 52.527) (xy 46.160128 52.527) (xy 46.20303 52.555666)
(xy 46.317137 52.602931) (xy 46.438272 52.627026) (xy 46.56178 52.627026) (xy 46.682915 52.602931) (xy 46.797022 52.555666)
(xy 46.899715 52.487049) (xy 46.987049 52.399715) (xy 47.055666 52.297022) (xy 47.102931 52.182915) (xy 47.127026 52.06178)
(xy 47.127026 51.938272) (xy 47.102931 51.817137) (xy 47.055666 51.70303) (xy 46.987049 51.600337) (xy 46.899715 51.513003)
(xy 46.797022 51.444386) (xy 46.682915 51.397121) (xy 46.56178 51.373026) (xy 46.438272 51.373026) (xy 46.317137 51.397121)
(xy 46.20303 51.444386) (xy 46.160206 51.473) (xy 27.339859 51.473) (xy 27.296996 51.44436) (xy 27.182889 51.397095)
(xy 27.061754 51.373) (xy 26.938246 51.373) (xy 26.817111 51.397095) (xy 26.703004 51.44436) (xy 26.600311 51.512977)
(xy 26.512977 51.600311) (xy 26.44436 51.703004) (xy 26.397095 51.817111) (xy 26.373 51.938246) (xy 22.527 51.938246)
(xy 22.527 51.849604) (xy 22.468319 51.55459) (xy 22.35321 51.276694) (xy 22.186099 51.026594) (xy 21.973406 50.813901)
(xy 21.723306 50.64679) (xy 21.44541 50.531681) (xy 21.150396 50.473) (xy 20.849604 50.473) (xy 20.55459 50.531681)
(xy 20.276694 50.64679) (xy 20.026594 50.813901) (xy 19.813901 51.026594) (xy 19.64679 51.276694) (xy 19.531681 51.55459)
(xy 19.473 51.849604) (xy 17.127 51.849604) (xy 17.127 39.2) (xy 25.321176 39.2) (xy 25.321176 40.8)
(xy 25.328455 40.873905) (xy 25.350012 40.94497) (xy 25.385019 41.010463) (xy 25.432131 41.067869) (xy 25.489537 41.114981)
(xy 25.55503 41.149988) (xy 25.626095 41.171545) (xy 25.7 41.178824) (xy 27.3 41.178824) (xy 27.373905 41.171545)
(xy 27.44497 41.149988) (xy 27.510463 41.114981) (xy 27.567869 41.067869) (xy 27.614981 41.010463) (xy 27.649988 40.94497)
(xy 27.671545 40.873905) (xy 27.678824 40.8) (xy 27.678824 39.2) (xy 35.821176 39.2) (xy 35.821176 40.8)
(xy 35.828455 40.873905) (xy 35.850012 40.94497) (xy 35.885019 41.010463) (xy 35.932131 41.067869) (xy 35.989537 41.114981)
(xy 36.05503 41.149988) (xy 36.126095 41.171545) (xy 36.2 41.178824) (xy 37.8 41.178824) (xy 37.873905 41.171545)
(xy 37.94497 41.149988) (xy 38.010463 41.114981) (xy 38.067869 41.067869) (xy 38.114981 41.010463) (xy 38.149988 40.94497)
(xy 38.171545 40.873905) (xy 38.178824 40.8) (xy 38.178824 39.5) (xy 44.121176 39.5) (xy 44.121176 41.5)
(xy 44.128455 41.573905) (xy 44.150012 41.64497) (xy 44.185019 41.710463) (xy 44.232131 41.767869) (xy 44.289537 41.814981)
(xy 44.35503 41.849988) (xy 44.426095 41.871545) (xy 44.5 41.878824) (xy 46.5 41.878824) (xy 46.573905 41.871545)
(xy 46.617926 41.858191) (xy 60.349403 55.589668) (xy 60.376867 55.623133) (xy 60.510408 55.732727) (xy 60.63131 55.79735)
(xy 60.662763 55.814162) (xy 60.828077 55.86431) (xy 61 55.881243) (xy 61.043079 55.877) (xy 78.636735 55.877)
(xy 80.123001 57.363267) (xy 80.123 68.123) (xy 79 68.123) (xy 78.926451 68.130244) (xy 78.855728 68.151697)
(xy 78.79055 68.186536) (xy 78.733421 68.233421) (xy 78.686536 68.29055) (xy 78.651697 68.355728) (xy 78.630244 68.426451)
(xy 78.623 68.5) (xy 78.623 71.5) (xy 78.630244 71.573549) (xy 78.651697 71.644272) (xy 78.686536 71.70945)
(xy 78.733421 71.766579) (xy 78.79055 71.813464) (xy 78.855728 71.848303) (xy 78.926451 71.869756) (xy 79 71.877)
(xy 80.323 71.877) (xy 80.323 71.966755) (xy 80.319726 72) (xy 80.323 72.033245) (xy 80.323 72.033251)
(xy 80.330786 72.112305) (xy 80.332796 72.132714) (xy 80.371508 72.260329) (xy 80.434372 72.37794) (xy 80.48389 72.438277)
(xy 80.518973 72.481026) (xy 80.5448 72.502222) (xy 82.597474 74.554896) (xy 82.618673 74.580727) (xy 82.721759 74.665328)
(xy 82.83937 74.728192) (xy 82.966985 74.766904) (xy 83.066448 74.7767) (xy 83.066457 74.7767) (xy 83.099699 74.779974)
(xy 83.132941 74.7767) (xy 88.805278 74.7767) (xy 90.823001 76.794424) (xy 90.823 81.633) (xy 90.442848 81.633)
(xy 90.242021 81.65278) (xy 89.984341 81.730946) (xy 89.746861 81.857882) (xy 89.538708 82.028708) (xy 89.367882 82.236861)
(xy 89.240946 82.474341) (xy 89.16278 82.732021) (xy 89.136386 83) (xy 89.16278 83.267979) (xy 89.240946 83.525659)
(xy 89.367882 83.763139) (xy 89.538708 83.971292) (xy 89.746861 84.142118) (xy 89.984341 84.269054) (xy 90.12921 84.312999)
(xy 87.995108 86.447103) (xy 87.984932 86.441664) (xy 87.872831 86.407658) (xy 87.75625 86.396176) (xy 87.24375 86.396176)
(xy 87.127169 86.407658) (xy 87.015068 86.441664) (xy 86.911756 86.496885) (xy 86.821201 86.571201) (xy 86.746885 86.661756)
(xy 86.691664 86.765068) (xy 86.657658 86.877169) (xy 86.646176 86.99375) (xy 86.646176 87.43125) (xy 86.657658 87.547831)
(xy 86.691664 87.659932) (xy 86.746885 87.763244) (xy 86.821201 87.853799) (xy 86.911756 87.928115) (xy 87.015068 87.983336)
(xy 87.070001 88) (xy 87.015068 88.016664) (xy 86.911756 88.071885) (xy 86.821201 88.146201) (xy 86.746885 88.236756)
(xy 86.691664 88.340068) (xy 86.657658 88.452169) (xy 86.646176 88.56875) (xy 86.646176 89.00625) (xy 86.657658 89.122831)
(xy 86.691664 89.234932) (xy 86.746885 89.338244) (xy 86.821201 89.428799) (xy 86.911756 89.503115) (xy 87.015068 89.558336)
(xy 87.127169 89.592342) (xy 87.24375 89.603824) (xy 87.473001 89.603824) (xy 87.473 92.229394) (xy 87.40503 92.250012)
(xy 87.339537 92.285019) (xy 87.282131 92.332131) (xy 87.235019 92.389537) (xy 87.200012 92.45503) (xy 87.178455 92.526095)
(xy 87.171176 92.6) (xy 87.171176 93.4) (xy 87.178455 93.473905) (xy 87.200012 93.54497) (xy 87.235019 93.610463)
(xy 87.282131 93.667869) (xy 87.339537 93.714981) (xy 87.40503 93.749988) (xy 87.476095 93.771545) (xy 87.55 93.778824)
(xy 88.45 93.778824) (xy 88.523905 93.771545) (xy 88.59497 93.749988) (xy 88.660463 93.714981) (xy 88.717869 93.667869)
(xy 88.764981 93.610463) (xy 88.799988 93.54497) (xy 88.805439 93.527) (xy 89.141176 93.527) (xy 89.141176 93.99)
(xy 89.148455 94.063905) (xy 89.170012 94.13497) (xy 89.205019 94.200463) (xy 89.252131 94.257869) (xy 89.309537 94.304981)
(xy 89.37503 94.339988) (xy 89.446095 94.361545) (xy 89.52 94.368824) (xy 93.48 94.368824) (xy 93.553905 94.361545)
(xy 93.62497 94.339988) (xy 93.690463 94.304981) (xy 93.747869 94.257869) (xy 93.794981 94.200463) (xy 93.829988 94.13497)
(xy 93.851545 94.063905) (xy 93.858824 93.99) (xy 93.858824 92.01) (xy 93.851545 91.936095) (xy 93.829988 91.86503)
(xy 93.794981 91.799537) (xy 93.747869 91.742131) (xy 93.690463 91.695019) (xy 93.62497 91.660012) (xy 93.553905 91.638455)
(xy 93.48 91.631176) (xy 89.52 91.631176) (xy 89.446095 91.638455) (xy 89.37503 91.660012) (xy 89.309537 91.695019)
(xy 89.252131 91.742131) (xy 89.205019 91.799537) (xy 89.170012 91.86503) (xy 89.148455 91.936095) (xy 89.141176 92.01)
(xy 89.141176 92.473) (xy 88.805439 92.473) (xy 88.799988 92.45503) (xy 88.764981 92.389537) (xy 88.717869 92.332131)
(xy 88.660463 92.285019) (xy 88.59497 92.250012) (xy 88.527 92.229394) (xy 88.527 88.838377) (xy 88.529549 88.812499)
(xy 88.527 88.786619) (xy 88.519374 88.70919) (xy 88.489239 88.60985) (xy 88.440304 88.518298) (xy 88.374448 88.438052)
(xy 88.360717 88.426783) (xy 88.349448 88.413052) (xy 88.324187 88.392321) (xy 88.308336 88.340068) (xy 88.253115 88.236756)
(xy 88.178799 88.146201) (xy 88.088244 88.071885) (xy 87.984932 88.016664) (xy 87.929999 88) (xy 87.984932 87.983336)
(xy 88.088244 87.928115) (xy 88.178799 87.853799) (xy 88.253115 87.763244) (xy 88.308336 87.659932) (xy 88.324187 87.607679)
(xy 88.349448 87.586948) (xy 88.365955 87.566834) (xy 91.565791 84.367) (xy 92.557152 84.367) (xy 92.757979 84.34722)
(xy 93.015659 84.269054) (xy 93.253139 84.142118) (xy 93.461292 83.971292) (xy 93.632118 83.763139) (xy 93.759054 83.525659)
(xy 93.83722 83.267979) (xy 93.863614 83) (xy 93.83722 82.732021) (xy 93.759054 82.474341) (xy 93.632118 82.236861)
(xy 93.461292 82.028708) (xy 93.253139 81.857882) (xy 93.015659 81.730946) (xy 92.757979 81.65278) (xy 92.557152 81.633)
(xy 92.177 81.633) (xy 92.177 76.547252) (xy 92.180275 76.514) (xy 92.167204 76.381285) (xy 92.128492 76.25367)
(xy 92.065628 76.136059) (xy 92.002224 76.058801) (xy 92.002222 76.058799) (xy 91.981027 76.032973) (xy 91.955201 76.011778)
(xy 89.587926 73.644504) (xy 89.566727 73.618673) (xy 89.463641 73.534072) (xy 89.34603 73.471208) (xy 89.218415 73.432496)
(xy 89.118952 73.4227) (xy 89.118945 73.4227) (xy 89.0857 73.419426) (xy 89.052455 73.4227) (xy 83.380122 73.4227)
(xy 81.743193 71.785771) (xy 81.766579 71.766579) (xy 81.813464 71.70945) (xy 81.848303 71.644272) (xy 81.869756 71.573549)
(xy 81.877 71.5) (xy 81.877 57.043076) (xy 81.881243 56.999999) (xy 81.877 56.956921) (xy 81.86431 56.828078)
(xy 81.814162 56.662763) (xy 81.732727 56.510408) (xy 81.623133 56.376867) (xy 81.589674 56.349408) (xy 79.650594 54.410329)
(xy 79.623133 54.376867) (xy 79.489592 54.267273) (xy 79.337237 54.185838) (xy 79.171922 54.13569) (xy 79.043079 54.123)
(xy 79 54.118757) (xy 78.956921 54.123) (xy 61.363265 54.123) (xy 47.604642 40.364377) (xy 49.203 40.364377)
(xy 49.203 40.635623) (xy 49.255917 40.901656) (xy 49.359718 41.152254) (xy 49.510414 41.377787) (xy 49.702213 41.569586)
(xy 49.927746 41.720282) (xy 50.178344 41.824083) (xy 50.444377 41.877) (xy 50.715623 41.877) (xy 50.981656 41.824083)
(xy 51.232254 41.720282) (xy 51.457787 41.569586) (xy 51.649586 41.377787) (xy 51.800282 41.152254) (xy 51.904083 40.901656)
(xy 51.957 40.635623) (xy 51.957 40.364377) (xy 58.623 40.364377) (xy 58.623 40.635623) (xy 58.675917 40.901656)
(xy 58.779718 41.152254) (xy 58.930414 41.377787) (xy 59.122213 41.569586) (xy 59.347746 41.720282) (xy 59.598344 41.824083)
(xy 59.864377 41.877) (xy 60.135623 41.877) (xy 60.401656 41.824083) (xy 60.652254 41.720282) (xy 60.877787 41.569586)
(xy 61.069586 41.377787) (xy 61.220282 41.152254) (xy 61.324083 40.901656) (xy 61.377 40.635623) (xy 61.377 40.364377)
(xy 61.324083 40.098344) (xy 61.220282 39.847746) (xy 61.069586 39.622213) (xy 60.877787 39.430414) (xy 60.652254 39.279718)
(xy 60.401656 39.175917) (xy 60.135623 39.123) (xy 59.864377 39.123) (xy 59.598344 39.175917) (xy 59.347746 39.279718)
(xy 59.122213 39.430414) (xy 58.930414 39.622213) (xy 58.779718 39.847746) (xy 58.675917 40.098344) (xy 58.623 40.364377)
(xy 51.957 40.364377) (xy 51.904083 40.098344) (xy 51.800282 39.847746) (xy 51.649586 39.622213) (xy 51.457787 39.430414)
(xy 51.232254 39.279718) (xy 50.981656 39.175917) (xy 50.715623 39.123) (xy 50.444377 39.123) (xy 50.178344 39.175917)
(xy 49.927746 39.279718) (xy 49.702213 39.430414) (xy 49.510414 39.622213) (xy 49.359718 39.847746) (xy 49.255917 40.098344)
(xy 49.203 40.364377) (xy 47.604642 40.364377) (xy 47.150597 39.910332) (xy 47.123133 39.876867) (xy 46.989592 39.767273)
(xy 46.878824 39.708067) (xy 46.878824 39.5) (xy 46.871545 39.426095) (xy 46.849988 39.35503) (xy 46.814981 39.289537)
(xy 46.767869 39.232131) (xy 46.710463 39.185019) (xy 46.64497 39.150012) (xy 46.573905 39.128455) (xy 46.5 39.121176)
(xy 44.5 39.121176) (xy 44.426095 39.128455) (xy 44.35503 39.150012) (xy 44.289537 39.185019) (xy 44.232131 39.232131)
(xy 44.185019 39.289537) (xy 44.150012 39.35503) (xy 44.128455 39.426095) (xy 44.121176 39.5) (xy 38.178824 39.5)
(xy 38.178824 39.2) (xy 38.171545 39.126095) (xy 38.149988 39.05503) (xy 38.114981 38.989537) (xy 38.067869 38.932131)
(xy 38.010463 38.885019) (xy 37.94497 38.850012) (xy 37.873905 38.828455) (xy 37.8 38.821176) (xy 36.2 38.821176)
(xy 36.126095 38.828455) (xy 36.05503 38.850012) (xy 35.989537 38.885019) (xy 35.932131 38.932131) (xy 35.885019 38.989537)
(xy 35.850012 39.05503) (xy 35.828455 39.126095) (xy 35.821176 39.2) (xy 27.678824 39.2) (xy 27.671545 39.126095)
(xy 27.649988 39.05503) (xy 27.614981 38.989537) (xy 27.567869 38.932131) (xy 27.510463 38.885019) (xy 27.44497 38.850012)
(xy 27.373905 38.828455) (xy 27.3 38.821176) (xy 25.7 38.821176) (xy 25.626095 38.828455) (xy 25.55503 38.850012)
(xy 25.489537 38.885019) (xy 25.432131 38.932131) (xy 25.385019 38.989537) (xy 25.350012 39.05503) (xy 25.328455 39.126095)
(xy 25.321176 39.2) (xy 17.127 39.2) (xy 17.127 37.492702) (xy 25.686903 37.492702) (xy 25.758486 37.736671)
(xy 26.013996 37.857571) (xy 26.288184 37.9263) (xy 26.570512 37.940217) (xy 26.85013 37.898787) (xy 27.116292 37.803603)
(xy 27.241514 37.736671) (xy 27.313097 37.492702) (xy 36.186903 37.492702) (xy 36.258486 37.736671) (xy 36.513996 37.857571)
(xy 36.788184 37.9263) (xy 37.070512 37.940217) (xy 37.35013 37.898787) (xy 37.616292 37.803603) (xy 37.741514 37.736671)
(xy 37.813097 37.492702) (xy 37 36.679605) (xy 36.186903 37.492702) (xy 27.313097 37.492702) (xy 26.5 36.679605)
(xy 25.686903 37.492702) (xy 17.127 37.492702) (xy 17.127 36.570512) (xy 25.059783 36.570512) (xy 25.101213 36.85013)
(xy 25.196397 37.116292) (xy 25.263329 37.241514) (xy 25.507298 37.313097) (xy 26.320395 36.5) (xy 26.679605 36.5)
(xy 27.492702 37.313097) (xy 27.736671 37.241514) (xy 27.857571 36.986004) (xy 27.9263 36.711816) (xy 27.933265 36.570512)
(xy 35.559783 36.570512) (xy 35.601213 36.85013) (xy 35.696397 37.116292) (xy 35.763329 37.241514) (xy 36.007298 37.313097)
(xy 36.820395 36.5) (xy 37.179605 36.5) (xy 37.992702 37.313097) (xy 38.236671 37.241514) (xy 38.357571 36.986004)
(xy 38.4263 36.711816) (xy 38.440217 36.429488) (xy 38.398787 36.14987) (xy 38.303603 35.883708) (xy 38.236671 35.758486)
(xy 37.992702 35.686903) (xy 37.179605 36.5) (xy 36.820395 36.5) (xy 36.007298 35.686903) (xy 35.763329 35.758486)
(xy 35.642429 36.013996) (xy 35.5737 36.288184) (xy 35.559783 36.570512) (xy 27.933265 36.570512) (xy 27.940217 36.429488)
(xy 27.898787 36.14987) (xy 27.803603 35.883708) (xy 27.736671 35.758486) (xy 27.492702 35.686903) (xy 26.679605 36.5)
(xy 26.320395 36.5) (xy 25.507298 35.686903) (xy 25.263329 35.758486) (xy 25.142429 36.013996) (xy 25.0737 36.288184)
(xy 25.059783 36.570512) (xy 17.127 36.570512) (xy 17.127 35.507298) (xy 25.686903 35.507298) (xy 26.5 36.320395)
(xy 27.313097 35.507298) (xy 36.186903 35.507298) (xy 37 36.320395) (xy 37.813097 35.507298) (xy 37.74769 35.284377)
(xy 44.123 35.284377) (xy 44.123 35.555623) (xy 44.175917 35.821656) (xy 44.279718 36.072254) (xy 44.430414 36.297787)
(xy 44.622213 36.489586) (xy 44.847746 36.640282) (xy 45.098344 36.744083) (xy 45.364377 36.797) (xy 45.635623 36.797)
(xy 45.901656 36.744083) (xy 46.152254 36.640282) (xy 46.377787 36.489586) (xy 46.569586 36.297787) (xy 46.720282 36.072254)
(xy 46.824083 35.821656) (xy 46.828304 35.800435) (xy 48.989871 35.800435) (xy 49.094644 36.103344) (xy 49.256499 36.379992)
(xy 49.469215 36.619748) (xy 49.724618 36.813399) (xy 50.012893 36.953502) (xy 50.199566 37.010124) (xy 50.453 36.890777)
(xy 50.453 35.547) (xy 50.707 35.547) (xy 50.707 36.890777) (xy 50.960434 37.010124) (xy 51.147107 36.953502)
(xy 51.435382 36.813399) (xy 51.690785 36.619748) (xy 51.903501 36.379992) (xy 52.065356 36.103344) (xy 52.170129 35.800435)
(xy 52.051315 35.547) (xy 50.707 35.547) (xy 50.453 35.547) (xy 49.108685 35.547) (xy 48.989871 35.800435)
(xy 46.828304 35.800435) (xy 46.877 35.555623) (xy 46.877 35.284377) (xy 46.828305 35.039565) (xy 48.989871 35.039565)
(xy 49.108685 35.293) (xy 50.453 35.293) (xy 50.453 33.949223) (xy 50.707 33.949223) (xy 50.707 35.293)
(xy 52.051315 35.293) (xy 52.170129 35.039565) (xy 52.065356 34.736656) (xy 51.903501 34.460008) (xy 51.690785 34.220252)
(xy 51.435382 34.026601) (xy 51.147107 33.886498) (xy 50.960434 33.829876) (xy 50.707 33.949223) (xy 50.453 33.949223)
(xy 50.199566 33.829876) (xy 50.012893 33.886498) (xy 49.724618 34.026601) (xy 49.469215 34.220252) (xy 49.256499 34.460008)
(xy 49.094644 34.736656) (xy 48.989871 35.039565) (xy 46.828305 35.039565) (xy 46.824083 35.018344) (xy 46.720282 34.767746)
(xy 46.569586 34.542213) (xy 46.377787 34.350414) (xy 46.152254 34.199718) (xy 45.901656 34.095917) (xy 45.635623 34.043)
(xy 45.364377 34.043) (xy 45.098344 34.095917) (xy 44.847746 34.199718) (xy 44.622213 34.350414) (xy 44.430414 34.542213)
(xy 44.279718 34.767746) (xy 44.175917 35.018344) (xy 44.123 35.284377) (xy 37.74769 35.284377) (xy 37.741514 35.263329)
(xy 37.486004 35.142429) (xy 37.211816 35.0737) (xy 36.929488 35.059783) (xy 36.64987 35.101213) (xy 36.383708 35.196397)
(xy 36.258486 35.263329) (xy 36.186903 35.507298) (xy 27.313097 35.507298) (xy 27.241514 35.263329) (xy 26.986004 35.142429)
(xy 26.711816 35.0737) (xy 26.429488 35.059783) (xy 26.14987 35.101213) (xy 25.883708 35.196397) (xy 25.758486 35.263329)
(xy 25.686903 35.507298) (xy 17.127 35.507298) (xy 17.127 29.65) (xy 22.771176 29.65) (xy 22.771176 31.35)
(xy 22.778455 31.423905) (xy 22.800012 31.49497) (xy 22.835019 31.560463) (xy 22.882131 31.617869) (xy 22.939537 31.664981)
(xy 23.00503 31.699988) (xy 23.076095 31.721545) (xy 23.15 31.728824) (xy 24.85 31.728824) (xy 24.923905 31.721545)
(xy 24.99497 31.699988) (xy 25.060463 31.664981) (xy 25.117869 31.617869) (xy 25.164981 31.560463) (xy 25.199988 31.49497)
(xy 25.221545 31.423905) (xy 25.228824 31.35) (xy 25.228824 31.18662) (xy 25.344822 31.381355) (xy 25.539731 31.597588)
(xy 25.77308 31.771641) (xy 26.035901 31.896825) (xy 26.18311 31.941476) (xy 26.413 31.820155) (xy 26.413 30.627)
(xy 26.667 30.627) (xy 26.667 31.820155) (xy 26.89689 31.941476) (xy 27.044099 31.896825) (xy 27.30692 31.771641)
(xy 27.540269 31.597588) (xy 27.735178 31.381355) (xy 27.884157 31.131252) (xy 27.981481 30.856891) (xy 27.860814 30.627)
(xy 26.667 30.627) (xy 26.413 30.627) (xy 26.393 30.627) (xy 26.393 30.373) (xy 26.413 30.373)
(xy 26.413 29.179845) (xy 26.667 29.179845) (xy 26.667 30.373) (xy 27.860814 30.373) (xy 27.86534 30.364377)
(xy 58.623 30.364377) (xy 58.623 30.635623) (xy 58.675917 30.901656) (xy 58.779718 31.152254) (xy 58.930414 31.377787)
(xy 59.122213 31.569586) (xy 59.347746 31.720282) (xy 59.598344 31.824083) (xy 59.864377 31.877) (xy 60.135623 31.877)
(xy 60.401656 31.824083) (xy 60.652254 31.720282) (xy 60.877787 31.569586) (xy 61.069586 31.377787) (xy 61.220282 31.152254)
(xy 61.324083 30.901656) (xy 61.377 30.635623) (xy 61.377 30.364377) (xy 61.324083 30.098344) (xy 61.220282 29.847746)
(xy 61.069586 29.622213) (xy 60.877787 29.430414) (xy 60.652254 29.279718) (xy 60.401656 29.175917) (xy 60.135623 29.123)
(xy 59.864377 29.123) (xy 59.598344 29.175917) (xy 59.347746 29.279718) (xy 59.122213 29.430414) (xy 58.930414 29.622213)
(xy 58.779718 29.847746) (xy 58.675917 30.098344) (xy 58.623 30.364377) (xy 27.86534 30.364377) (xy 27.981481 30.143109)
(xy 27.884157 29.868748) (xy 27.735178 29.618645) (xy 27.540269 29.402412) (xy 27.30692 29.228359) (xy 27.044099 29.103175)
(xy 26.89689 29.058524) (xy 26.667 29.179845) (xy 26.413 29.179845) (xy 26.18311 29.058524) (xy 26.035901 29.103175)
(xy 25.77308 29.228359) (xy 25.539731 29.402412) (xy 25.344822 29.618645) (xy 25.228824 29.81338) (xy 25.228824 29.65)
(xy 25.221545 29.576095) (xy 25.199988 29.50503) (xy 25.164981 29.439537) (xy 25.117869 29.382131) (xy 25.060463 29.335019)
(xy 24.99497 29.300012) (xy 24.923905 29.278455) (xy 24.85 29.271176) (xy 23.15 29.271176) (xy 23.076095 29.278455)
(xy 23.00503 29.300012) (xy 22.939537 29.335019) (xy 22.882131 29.382131) (xy 22.835019 29.439537) (xy 22.800012 29.50503)
(xy 22.778455 29.576095) (xy 22.771176 29.65) (xy 17.127 29.65) (xy 17.127 25.815132) (xy 28.373 25.815132)
(xy 28.373 26.184868) (xy 28.445132 26.547501) (xy 28.586624 26.889093) (xy 28.792039 27.196518) (xy 29.053482 27.457961)
(xy 29.360907 27.663376) (xy 29.702499 27.804868) (xy 30.065132 27.877) (xy 30.434868 27.877) (xy 30.797501 27.804868)
(xy 31.139093 27.663376) (xy 31.446518 27.457961) (xy 31.707961 27.196518) (xy 31.913376 26.889093) (xy 32.054868 26.547501)
(xy 32.127 26.184868) (xy 32.127 25.815132) (xy 50.873 25.815132) (xy 50.873 26.184868) (xy 50.945132 26.547501)
(xy 51.086624 26.889093) (xy 51.292039 27.196518) (xy 51.553482 27.457961) (xy 51.860907 27.663376) (xy 52.202499 27.804868)
(xy 52.565132 27.877) (xy 52.934868 27.877) (xy 53.297501 27.804868) (xy 53.639093 27.663376) (xy 53.946518 27.457961)
(xy 54.207961 27.196518) (xy 54.413376 26.889093) (xy 54.554868 26.547501) (xy 54.627 26.184868) (xy 54.627 25.815132)
(xy 54.554868 25.452499) (xy 54.413376 25.110907) (xy 54.207961 24.803482) (xy 53.946518 24.542039) (xy 53.639093 24.336624)
(xy 53.297501 24.195132) (xy 52.934868 24.123) (xy 52.565132 24.123) (xy 52.202499 24.195132) (xy 51.860907 24.336624)
(xy 51.553482 24.542039) (xy 51.292039 24.803482) (xy 51.086624 25.110907) (xy 50.945132 25.452499) (xy 50.873 25.815132)
(xy 32.127 25.815132) (xy 32.054868 25.452499) (xy 31.913376 25.110907) (xy 31.707961 24.803482) (xy 31.446518 24.542039)
(xy 31.139093 24.336624) (xy 30.797501 24.195132) (xy 30.434868 24.123) (xy 30.065132 24.123) (xy 29.702499 24.195132)
(xy 29.360907 24.336624) (xy 29.053482 24.542039) (xy 28.792039 24.803482) (xy 28.586624 25.110907) (xy 28.445132 25.452499)
(xy 28.373 25.815132) (xy 17.127 25.815132) (xy 17.127 18.402) (xy 17.519747 18.402) (xy 17.536878 18.400313)
(xy 17.539924 18.400334) (xy 17.545511 18.399786) (xy 17.642559 18.389586) (xy 17.678245 18.382261) (xy 17.71404 18.375433)
(xy 17.719413 18.37381) (xy 17.812632 18.344954) (xy 17.846216 18.330836) (xy 17.880005 18.317185) (xy 17.884961 18.31455)
(xy 17.970798 18.268137) (xy 18.000977 18.247781) (xy 18.031491 18.227813) (xy 18.035841 18.224265) (xy 18.11103 18.162063)
(xy 18.136715 18.136198) (xy 18.146108 18.127) (xy 66.873 18.127)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
)
(filled_polygon
(pts
(xy 25.57436 75.556996) (xy 25.642977 75.659689) (xy 25.730311 75.747023) (xy 25.833004 75.81564) (xy 25.947111 75.862905)
(xy 26.068246 75.887) (xy 26.191754 75.887) (xy 26.312889 75.862905) (xy 26.426996 75.81564) (xy 26.473001 75.784901)
(xy 26.473001 76.273) (xy 26.348169 76.273) (xy 26.344514 76.272326) (xy 26.296409 76.273) (xy 26.274119 76.273)
(xy 26.270422 76.273364) (xy 26.266718 76.273416) (xy 26.244639 76.275904) (xy 26.19669 76.280626) (xy 26.193126 76.281707)
(xy 26.192595 76.281767) (xy 26.159216 76.283172) (xy 26.115952 76.293687) (xy 26.072437 76.302979) (xy 26.041758 76.316193)
(xy 26.013217 76.326181) (xy 25.980984 76.334979) (xy 25.941139 76.354861) (xy 25.900782 76.373603) (xy 25.87381 76.393316)
(xy 25.848212 76.4094) (xy 25.818752 76.425147) (xy 25.784346 76.453383) (xy 25.749153 76.48065) (xy 25.727243 76.505871)
(xy 25.705871 76.527243) (xy 25.68065 76.549153) (xy 25.65339 76.584337) (xy 25.625146 76.618752) (xy 25.609396 76.648219)
(xy 25.593316 76.67381) (xy 25.573603 76.700782) (xy 25.554861 76.741139) (xy 25.534979 76.780984) (xy 25.52618 76.81322)
(xy 25.516195 76.841755) (xy 25.502979 76.872437) (xy 25.493685 76.915962) (xy 25.483172 76.959216) (xy 25.481767 76.992597)
(xy 25.478382 77.022643) (xy 25.472326 77.055487) (xy 25.47295 77.1) (xy 25.472326 77.144514) (xy 25.478381 77.177354)
(xy 25.481767 77.207404) (xy 25.483172 77.240783) (xy 25.493683 77.284029) (xy 25.502979 77.327563) (xy 25.516197 77.358249)
(xy 25.52618 77.386779) (xy 25.534979 77.419015) (xy 25.554861 77.45886) (xy 25.573603 77.499217) (xy 25.593316 77.526189)
(xy 25.609396 77.55178) (xy 25.625146 77.581247) (xy 25.65339 77.615662) (xy 25.68065 77.650846) (xy 25.705871 77.672756)
(xy 25.727243 77.694128) (xy 25.732344 77.7) (xy 25.727243 77.705871) (xy 25.705871 77.727243) (xy 25.68065 77.749153)
(xy 25.65339 77.784337) (xy 25.625146 77.818752) (xy 25.609396 77.848219) (xy 25.593316 77.87381) (xy 25.573603 77.900782)
(xy 25.554861 77.941139) (xy 25.534979 77.980984) (xy 25.52618 78.01322) (xy 25.516195 78.041755) (xy 25.502979 78.072437)
(xy 25.493685 78.115962) (xy 25.483172 78.159216) (xy 25.481767 78.192597) (xy 25.478382 78.222643) (xy 25.472326 78.255487)
(xy 25.47295 78.300001) (xy 25.472326 78.344514) (xy 25.478381 78.377354) (xy 25.481767 78.407404) (xy 25.483172 78.440783)
(xy 25.493683 78.484029) (xy 25.502979 78.527563) (xy 25.516197 78.558249) (xy 25.52618 78.586779) (xy 25.534979 78.619015)
(xy 25.554861 78.65886) (xy 25.573603 78.699217) (xy 25.593316 78.726189) (xy 25.609396 78.75178) (xy 25.625146 78.781247)
(xy 25.65339 78.815662) (xy 25.68065 78.850846) (xy 25.705871 78.872756) (xy 25.727243 78.894128) (xy 25.732344 78.9)
(xy 25.727243 78.905871) (xy 25.705871 78.927243) (xy 25.68065 78.949153) (xy 25.65339 78.984337) (xy 25.625146 79.018752)
(xy 25.609396 79.048219) (xy 25.593316 79.07381) (xy 25.573603 79.100782) (xy 25.554861 79.141139) (xy 25.534979 79.180984)
(xy 25.52618 79.21322) (xy 25.516195 79.241755) (xy 25.502979 79.272437) (xy 25.493685 79.315962) (xy 25.483172 79.359216)
(xy 25.481767 79.392597) (xy 25.478382 79.422643) (xy 25.472326 79.455487) (xy 25.47295 79.500001) (xy 25.472326 79.544514)
(xy 25.478381 79.57735) (xy 25.481767 79.607404) (xy 25.483172 79.640783) (xy 25.493683 79.684029) (xy 25.502979 79.727563)
(xy 25.516197 79.758249) (xy 25.52618 79.786779) (xy 25.534979 79.819015) (xy 25.554861 79.85886) (xy 25.573603 79.899217)
(xy 25.593316 79.926189) (xy 25.609396 79.95178) (xy 25.625146 79.981247) (xy 25.65339 80.015662) (xy 25.68065 80.050846)
(xy 25.705871 80.072756) (xy 25.727243 80.094128) (xy 25.732344 80.1) (xy 25.727243 80.105871) (xy 25.705871 80.127243)
(xy 25.68065 80.149153) (xy 25.65339 80.184337) (xy 25.625146 80.218752) (xy 25.609396 80.248219) (xy 25.593316 80.27381)
(xy 25.573603 80.300782) (xy 25.554861 80.341139) (xy 25.534979 80.380984) (xy 25.52618 80.41322) (xy 25.516195 80.441755)
(xy 25.502979 80.472437) (xy 25.493685 80.515962) (xy 25.483172 80.559216) (xy 25.481767 80.592597) (xy 25.478382 80.622643)
(xy 25.472326 80.655487) (xy 25.47295 80.7) (xy 25.472326 80.744514) (xy 25.478381 80.777354) (xy 25.481767 80.807404)
(xy 25.483172 80.840783) (xy 25.493683 80.884029) (xy 25.502979 80.927563) (xy 25.516197 80.958249) (xy 25.52618 80.986779)
(xy 25.534979 81.019015) (xy 25.554861 81.05886) (xy 25.573603 81.099217) (xy 25.593316 81.126189) (xy 25.609396 81.15178)
(xy 25.625146 81.181247) (xy 25.65339 81.215662) (xy 25.68065 81.250846) (xy 25.705871 81.272756) (xy 25.727243 81.294128)
(xy 25.749153 81.319349) (xy 25.784346 81.346616) (xy 25.818752 81.374852) (xy 25.848212 81.390599) (xy 25.87381 81.406683)
(xy 25.900782 81.426396) (xy 25.941139 81.445138) (xy 25.980984 81.46502) (xy 26.013217 81.473818) (xy 26.041746 81.483801)
(xy 26.072429 81.497018) (xy 26.115957 81.506313) (xy 26.159216 81.516827) (xy 26.192593 81.518232) (xy 26.193122 81.518292)
(xy 26.19669 81.519374) (xy 26.244661 81.524099) (xy 26.26671 81.526583) (xy 26.270413 81.526635) (xy 26.274119 81.527)
(xy 26.296418 81.527) (xy 26.344506 81.527675) (xy 26.348167 81.527) (xy 26.473 81.527) (xy 26.473 81.974119)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(xy 26.470451 82) (xy 26.480626 82.103309) (xy 26.510761 82.202649) (xy 26.559696 82.294201) (xy 26.564497 82.300051)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(xy 26.625553 82.374448) (xy 26.645662 82.390951) (xy 28.473 84.21829) (xy 28.473 84.594119) (xy 28.470451 84.62)
(xy 28.480626 84.723309) (xy 28.485863 84.740574) (xy 24.426999 80.68171) (xy 24.426999 80.248168) (xy 24.427674 80.244507)
(xy 24.426999 80.196398) (xy 24.426999 80.17412) (xy 24.426634 80.17041) (xy 24.426582 80.166711) (xy 24.424098 80.144662)
(xy 24.419373 80.096691) (xy 24.418291 80.093123) (xy 24.418231 80.092594) (xy 24.416826 80.059217) (xy 24.406312 80.015958)
(xy 24.397017 79.97243) (xy 24.3838 79.941747) (xy 24.373817 79.913218) (xy 24.365019 79.880985) (xy 24.345137 79.84114)
(xy 24.338571 79.827001) (xy 24.551832 79.827001) (xy 24.555493 79.827676) (xy 24.603581 79.827001) (xy 24.62588 79.827001)
(xy 24.629586 79.826636) (xy 24.633288 79.826584) (xy 24.655332 79.8241) (xy 24.703309 79.819375) (xy 24.706877 79.818293)
(xy 24.707406 79.818233) (xy 24.740783 79.816828) (xy 24.78403 79.806316) (xy 24.827569 79.797019) (xy 24.858253 79.783802)
(xy 24.886779 79.77382) (xy 24.919015 79.765021) (xy 24.95886 79.745139) (xy 24.999217 79.726397) (xy 25.026189 79.706684)
(xy 25.05178 79.690604) (xy 25.081247 79.674854) (xy 25.115662 79.64661) (xy 25.150846 79.61935) (xy 25.172756 79.594129)
(xy 25.194128 79.572757) (xy 25.219349 79.550847) (xy 25.246616 79.515654) (xy 25.274852 79.481248) (xy 25.290599 79.451788)
(xy 25.306683 79.42619) (xy 25.326396 79.399218) (xy 25.345138 79.358861) (xy 25.36502 79.319016) (xy 25.373818 79.286783)
(xy 25.383804 79.258247) (xy 25.39702 79.227564) (xy 25.406312 79.184045) (xy 25.416827 79.140784) (xy 25.418232 79.107406)
(xy 25.421618 79.077354) (xy 25.427673 79.044515) (xy 25.427049 79) (xy 25.427673 78.955488) (xy 25.421617 78.922644)
(xy 25.418232 78.892596) (xy 25.416827 78.859217) (xy 25.406312 78.815953) (xy 25.39702 78.772438) (xy 25.383806 78.741759)
(xy 25.373818 78.713218) (xy 25.36502 78.680985) (xy 25.345138 78.64114) (xy 25.326396 78.600783) (xy 25.306683 78.573811)
(xy 25.290599 78.548213) (xy 25.274852 78.518753) (xy 25.246616 78.484347) (xy 25.219349 78.449154) (xy 25.194128 78.427244)
(xy 25.172756 78.405872) (xy 25.150846 78.380651) (xy 25.115662 78.353391) (xy 25.081247 78.325147) (xy 25.05178 78.309397)
(xy 25.026189 78.293317) (xy 24.999217 78.273604) (xy 24.95886 78.254862) (xy 24.919015 78.23498) (xy 24.886779 78.226181)
(xy 24.858244 78.216196) (xy 24.840215 78.20843) (xy 24.8501 78.187145) (xy 24.869971 78.147322) (xy 24.878768 78.115094)
(xy 24.885056 78.097124) (xy 24.898272 78.066442) (xy 24.907568 78.022909) (xy 24.918081 77.979652) (xy 24.91916 77.954013)
(xy 24.919373 77.953311) (xy 24.924093 77.905385) (xy 24.926583 77.883289) (xy 24.926635 77.879577) (xy 24.926999 77.875882)
(xy 24.926999 77.853625) (xy 24.927674 77.805493) (xy 24.926999 77.801832) (xy 24.926999 77.798171) (xy 24.927674 77.79451)
(xy 24.926999 77.746378) (xy 24.926999 77.724121) (xy 24.926635 77.720426) (xy 24.926583 77.716715) (xy 24.924094 77.694623)
(xy 24.919373 77.646692) (xy 24.91916 77.64599) (xy 24.918081 77.620349) (xy 24.907566 77.577085) (xy 24.898272 77.53356)
(xy 24.885058 77.502883) (xy 24.878768 77.484907) (xy 24.869971 77.452679) (xy 24.8501 77.412856) (xy 24.831351 77.372484)
(xy 24.81164 77.345514) (xy 24.801508 77.329389) (xy 24.785761 77.299927) (xy 24.757515 77.265509) (xy 24.730257 77.230328)
(xy 24.70504 77.208421) (xy 24.69158 77.194961) (xy 24.669672 77.169743) (xy 24.634478 77.142475) (xy 24.600073 77.114239)
(xy 24.570609 77.09849) (xy 24.554486 77.08836) (xy 24.527516 77.068649) (xy 24.487144 77.0499) (xy 24.447321 77.030029)
(xy 24.415093 77.021232) (xy 24.397117 77.014942) (xy 24.36644 77.001728) (xy 24.328947 76.993722) (xy 24.345137 76.958861)
(xy 24.365019 76.919016) (xy 24.373817 76.886783) (xy 24.383802 76.85825) (xy 24.397017 76.827571) (xy 24.406313 76.784039)
(xy 24.416826 76.740784) (xy 24.418231 76.70741) (xy 24.418291 76.706879) (xy 24.419373 76.703311) (xy 24.424097 76.655347)
(xy 24.426582 76.633292) (xy 24.426634 76.629588) (xy 24.426999 76.625882) (xy 24.426999 76.603584) (xy 24.427674 76.555496)
(xy 24.426999 76.551835) (xy 24.426999 75.818291) (xy 24.71829 75.527) (xy 25.561935 75.527)
Schematic beautify and layout improvments, Length matching for SDIO
2019-12-25 19:15:32 +01:00
)
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
)
(zone (net 0) (net_name "") (layer F.Cu) (tstamp 0) (hatch edge 0.508)
(connect_pads (clearance 0.25))
(min_thickness 0.254)
(keepout (tracks allowed) (vias allowed) (copperpour not_allowed))
(fill (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
(polygon
Schematic beautify and layout improvments, Length matching for SDIO
2019-12-25 19:15:32 +01:00
(pts
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(xy 54.25 109) (xy 42.5 109) (xy 42.5 108) (xy 43 108) (xy 43 108.5)
(xy 53.75 108.5) (xy 53.75 104.75) (xy 54.25 104.75)
Schematic beautify and layout improvments, Length matching for SDIO
2019-12-25 19:15:32 +01:00
)
)
)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
)