-
Release v1.3.1 Stable
released this
2021-10-24 22:12:56 +02:00 | 1 commits to master since this releaseDownloads
-
Release v1.3 Stable
released this
2020-12-13 20:27:59 +01:00 | 15 commits to master since this releaseChange Notes
- Add switch mode power supply
- Add a shielding to the analog part. This is not needed! I just designed it for fun...
- Add voltage monitoring
- Add external watchdog IC
- Fix errata from previous version
Errata
- Bridge between GND and EARTH has to be connected. Otherwise the SD Card insertion detection doesn't work.
Downloads
- Source Code (ZIP)
- Source Code (TAR.GZ)
-
bom-reflow-oven-control-pcb-v1.3.csv
4.5 KiB
-
ibom.html
273 KiB
-
reflow-oven-control-pcb-bottom-v1.3.pos
3.4 KiB
-
reflow-oven-control-pcb-drl_map-v1.3.pdf
29 KiB
-
reflow-oven-control-pcb-top-v1.3.pos
11 KiB
-
reflow-oven-control-pcb-v1.3.zip
335 KiB
-
schematic-v1.3.pdf
378 KiB
-
Version v1.2 Stable
released this
2020-02-18 20:52:50 +01:00 | 40 commits to master since this releaseChange Notes
- Replace single opamps with 4-in-1 part
- Remove possibility to use an external ADC. Internal ADC is enough
- Improve ESD protection
- Fix OpAmp instabilities
- Improved reference stability
- Fixed some minor design flaws in layout
Errata
- Solder a 100 nF capacitor in parallel to R315 in order to improve noise robustness of the analog frontend. This prevents the wirebreeak detection from tripping, if noise is picked up.
Downloads
- Source Code (ZIP)
- Source Code (TAR.GZ)
-
ibom.html
209 KiB
-
reflow-oven-control-pcb-all-pos.csv
6.9 KiB
-
reflow-oven-control-pcb-drl_map.pdf
27 KiB
-
reflow-oven-control-pcb_gerber_v1.2.zip
536 KiB
-
reflow-oven-control-pcb_v1.2.jpg
136 KiB
-
schematic_v1-2.pdf
348 KiB
-
Version 1.1 Stable
released this
2020-01-12 16:09:39 +01:00 | 57 commits to master since this releaseChangenotes:
- Replace INA126 opamp with custom circuit
Errata
- Silkscreen of C317 and R312 is swapped. Consult interactive BOM for correct placement.
- Stability of OPAMPs is not guaranteed in this version. You have to make a few modifications
Downloads
-
V1.0 Stable
released this
2020-01-03 21:26:29 +01:00 | 64 commits to master since this releaseFirst produced version.
Due to a design error, this version DOES NOT WORK
Please only consider versions >=v1.2Downloads
- Source Code (ZIP)
- Source Code (TAR.GZ)
-
gerber_v1.0.tar.xz
241 KiB
-
ibom.html
218 KiB
-
reflow-oven-control-pcb.png
1.2 MiB
-
schematic_v1.pdf
329 KiB