Add C++ template for lex / yacc setup

Reviewed-on: #55

c-style-checker

@@ -1 +1 @@
-Subproject commit cb937262aa71ee3d610900d7f14eef28e9f11dd0
+Subproject commit aeb2707d80049094337742d0f62cd24dbef1c01d

stm-firmware/.gitignore

@@ -16,3 +16,10 @@ reflow-controller.includes
 *.files
 *.user.*
 *.user
+
+# VSCODE and CLANGD sepcific excludes
+
+.vscode/
+build/
+.cache/
+compile_commands.json

stm-firmware/CMakeLists.txt

@@ -1,7 +1,7 @@
 set(CMAKE_SYSTEM_NAME Generic)
 set(CMAKE_SYSTEM_PROCESSOR arm)
 set(CMAKE_CROSSCOMPILING 1)
-cmake_minimum_required(VERSION 3.0)
+cmake_minimum_required(VERSION 3.18)
 
 set(CMAKE_TOOLCHAIN_FILE "arm-none-eabi-gcc.cmake")
 
@@ -38,31 +38,16 @@ if (GIT_FOUND)
 	)
 	message("${BoldGreen}Git based version number: ${GIT_DESCRIBE}${ColorReset}")
 else (GIT_FOUND)
-	set(GIT_DESCRIBE "v0.0.0-unknown")
 	message("${BoldRed}No git installation found. It is highly recommended using git to generate the version number")
-	message("Version is set to: ${GIT_DESCRIBE}${ColorReset}")
+	message(FATAL_ERROR "Git is required")
 endif (GIT_FOUND)
 
-find_program(VIRTUALENV virtualenv)
-if (VIRTUALENV)
-	message("Python virtual environment found")
-	execute_process(
-		COMMAND ${VIRTUALENV} venv
-		WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
-		OUTPUT_QUIET
-		COMMAND_ERROR_IS_FATAL ANY
-	)
-	set(VENV_BIN "${CMAKE_CURRENT_BINARY_DIR}/venv/bin")
-	execute_process(
-		COMMAND ./pip install -r "${CMAKE_CURRENT_SOURCE_DIR}/crc-patcher/requirements.txt"
-		WORKING_DIRECTORY ${VENV_BIN}
-		OUTPUT_QUIET
-		COMMAND_ERROR_IS_FATAL ANY
-	)
-	message("${BoldGreen}python virtual environment set up!${ColorReset}")
-else(VIRTUALENV)
-	message(FATAL_ERROR "${BoldRed}Python virtual environment not set up: virtualenv: command not found!${ColorReset}")
-endif (VIRTUALENV)
+find_program(PATCHELFCRC patchelfcrc)
+if (PATCHELFCRC)
+	message("patchelfcrc found: ${PATCHELFCRC}")
+else(PATCHELFCRC)
+	message(FATAL_ERROR "${BoldRed}Patchelfcrc not found. Cannot patch CRC checksum into ELF file: patchelfcrc: command not found! See: https://git.shimatta.de/mhu/patchelfcrc${ColorReset}")
+endif (PATCHELFCRC)
 
 
 set(ELFFILE ${PROJECT_NAME}.elf)
@@ -71,11 +56,10 @@ set(MAPFILE ${PROJECT_NAME}.map)
 set(LINKER_SCRIPT ${CMAKE_CURRENT_SOURCE_DIR}/stm32f407vet6_flash.ld)
 
 add_compile_options(-Wall -Wextra -Wold-style-declaration -Wuninitialized -Wmaybe-uninitialized -Wunused-parameter)
-add_compile_options(-mlittle-endian -mthumb -mcpu=cortex-m4 -mthumb-interwork -mfloat-abi=hard -mfpu=fpv4-sp-d16 -nostartfiles -Wimplicit-fallthrough=3 -Wsign-compare)
+add_compile_options(-mlittle-endian -mthumb -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -nostartfiles -Wimplicit-fallthrough=3 -Wsign-compare)
 
 
-set(GIT_DESCRIBE "${GIT_DESCRIBE}")
-add_definitions(-DBASE64_LOOKUP_TABLE_SECTION=\".ccm.bss\" -DSHELLMATTA_HELP_ALIAS=\"?\" -DGIT_VER=${GIT_DESCRIBE} -DHSE_VALUE=8000000UL -DSTM32F407xx -DSTM32F4XX -DARM_MATH_CM4)
+add_definitions(-DBASE64_LOOKUP_TABLE_SECTION=\".ccm.bss\" -DSHELLMATTA_HELP_ALIAS=\"?\" -DHSE_VALUE=8000000UL -DSTM32F407xx -DSTM32F4XX -DARM_MATH_CM4)
 
 add_subdirectory(doxygen)
 add_subdirectory(updater/ram-code)
@@ -115,24 +99,35 @@ aux_source_directory("shellmatta/src" SHELLMATTA_SRCS)
 aux_source_directory("updater" UPDATER_SRCS)
 aux_source_directory("temp-profile" PROFILE_SRCS)
 
+set(GEN_VERSION_HEADER_PATH "${CMAKE_CURRENT_BINARY_DIR}/include/generated-version")
+
+
+add_custom_target(
+	generate-version-header
+	COMMAND mkdir -p ${GEN_VERSION_HEADER_PATH} && bash "${CMAKE_CURRENT_SOURCE_DIR}/create_version_header.sh" "${GEN_VERSION_HEADER_PATH}/version.h"
+	WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
+	COMMENT "Generating version number using git"
+)
+
 add_executable(${ELFFILE} ${MAIN_SOURCES} ${CFG_PARSER_SRCS} ${UI_SRCS}
 			${FAT_SRCS} ${SDIO_SRCS} ${BOOT_SRCS} ${SETUP_SRCS}
 			${STM_PERIPH_SRCS} ${SETTINGS_SRCS} ${SAFETY_SRCS}
 			${SHELLMATTA_SRCS} ${UPDATER_SRCS} ${PROFILE_SRCS}
 		)
 	
-add_dependencies(${ELFFILE} updater-ram-code-header-blob)		
+add_dependencies(${ELFFILE} updater-ram-code-header-blob generate-version-header)
+
 
 target_include_directories(${ELFFILE} PRIVATE ${CMAKE_CURRENT_SOURCE_DIR}/shellmatta/api ${CMAKE_CURRENT_SOURCE_DIR}/config-parser/include)
-target_link_options(${ELFFILE} PRIVATE -mlittle-endian -mthumb -mcpu=cortex-m4 -mthumb-interwork -mfloat-abi=hard -mfpu=fpv4-sp-d16 --disable-newlib-supplied-syscalls -nostartfiles -T${LINKER_SCRIPT} -Wl,--print-memory-usage)
+target_link_options(${ELFFILE} PRIVATE -mlittle-endian -mthumb -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 --disable-newlib-supplied-syscalls -nostartfiles -T${LINKER_SCRIPT} -Wl,--print-memory-usage)
 target_link_libraries(${ELFFILE} base64-lib linklist-lib)
-target_include_directories(${ELFFILE} PRIVATE "${CMAKE_CURRENT_BINARY_DIR}/updater/ram-code/include/")
+target_include_directories(${ELFFILE} PRIVATE "${CMAKE_CURRENT_BINARY_DIR}/updater/ram-code/include/" "${CMAKE_CURRENT_BINARY_DIR}/include/")
 
 add_custom_command(
     TARGET ${ELFFILE}
     POST_BUILD
-    COMMAND ./python "${CMAKE_CURRENT_SOURCE_DIR}/crc-patcher/crc-patch-elf.py" "${CMAKE_CURRENT_BINARY_DIR}/${ELFFILE}"
-    WORKING_DIRECTORY ${VENV_BIN}
+    COMMAND ${PATCHELFCRC} --little-endian --verbose --granularity word --start-magic 0xa8be53f9 --end-magic 0xffa582ff -O .flashcrc -p crc-32-mpeg -S .text -S .data -S .ccmdata -S .vectors "${CMAKE_CURRENT_BINARY_DIR}/${ELFFILE}"
+    WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
     COMMENT "Running Flash CRC Patcher"
     )
 

stm-firmware/config-parser/config-parser.c

@@ -28,7 +28,14 @@
 #include <stdio.h>
 #include <stdlib.h>
 
+/**
+ * @brief Config parser magic value used to check sanity of passed structs
+ */
 #define CONFIG_PARSER_MAGIC 0x464a6e2bUL
+
+/**
+ * @brief Config parser type casting macro
+ */
 #define CONFIG_PARSER(p) ((struct config_parser *)(p))
 
 /**
@@ -37,7 +44,8 @@
  * If the pointer is invalid, the function using this macro will return with
  * CONFIG_PARSER_PARAM_ERR
  */
-#define config_parser_check_handle(handle) do { if (!(handle) || \
+#define config_parser_check_handle(handle) do { \
+	if (!(handle) || \
 	((struct config_parser *)(handle))->magic != CONFIG_PARSER_MAGIC) \
 		return CONFIG_PARSER_PARAM_ERR; \
 	} while (0)
@@ -92,17 +100,17 @@ static int parse_value(struct config_parser_entry *entry, char *value_start_toke
 	if (value_start_token[0] != '-') {
 		/* Try parsing as ul */
 		entry->value.uint_val = strtoul(value_start_token, &endptr, 0);
-		if (endptr == value_start_token) {
+		if (endptr == value_start_token)
 			return -1;
-		}
+
 		entry->type = CONFIG_PARSER_TYPE_UINT;
 		goto exit;
 	} else {
 		/* Try parsing as int */
 		entry->value.int_val = strtod(value_start_token, &endptr);
-		if (endptr == value_start_token) {
+		if (endptr == value_start_token)
 			return -1;
-		}
+
 		entry->type = CONFIG_PARSER_TYPE_INT;
 	}
 
@@ -110,14 +118,16 @@ exit:
 	return 0;
 }
 
-enum config_parser_ret config_parser_get_line(config_parser_handle_t handle, struct config_parser_entry *entry, bool force_float)
+enum config_parser_ret config_parser_get_line(config_parser_handle_t handle, struct config_parser_entry *entry,
+					      bool force_float)
 {
 	struct config_parser *p;
-	config_parser_check_handle(handle);
-	p = CONFIG_PARSER(handle);
 	char *token;
 	int token_round = 0;
 
+	config_parser_check_handle(handle);
+	p = CONFIG_PARSER(handle);
+
 	if (!entry)
 		return CONFIG_PARSER_PARAM_ERR;
 
@@ -131,7 +141,6 @@ enum config_parser_ret config_parser_get_line(config_parser_handle_t handle, str
 		if (token[0] == '#') {
 			if (token_round == 0)
 				return CONFIG_PARSER_LINE_COMMENT;
-			else
 			break;
 		}
 
@@ -140,9 +149,8 @@ enum config_parser_ret config_parser_get_line(config_parser_handle_t handle, str
 			entry->name = token;
 			break;
 		case 1: /* = Symbol */
-			if (strcmp(token, "=")) {
+			if (strcmp(token, "="))
 				return CONFIG_PARSER_LINE_MALFORM;
-			}
 			break;
 		case 2: /* VALUE */
 			if (parse_value(entry, token))
@@ -172,6 +180,7 @@ enum config_parser_ret config_parser_reset_to_start(config_parser_handle_t handl
 {
 	FRESULT res;
 	struct config_parser *p;
+
 	config_parser_check_handle(handle);
 	p = CONFIG_PARSER(handle);
 
@@ -194,6 +203,7 @@ enum config_parser_ret config_parser_close_file(config_parser_handle_t handle)
 {
 	struct config_parser *p;
 	FRESULT res;
+
 	config_parser_check_handle(handle);
 	p = CONFIG_PARSER(handle);
 

stm-firmware/crc-patcher/crc-patch-elf.py

@@ -1,114 +0,0 @@
-#!/bin/python
-
-"""
-This script patches the CRC checksums into an existing ELF file.
-
-For this, it searches the follwoing sections:
-	1) .text
-	2) .data
-	3) .ccmdata
-	4) .vectors
-
-All sections MUST be a multiple of 4 bytes long because the CRC calculation relies on whole 32 bit words.
-The sections are excrated and the CRC is calculated for each section.
-
-In the section .flashcrc, the script expects a single struct with the prototype:
-struct flash_crcs {
-	uint32_t start_magic;
-	uint32_t crc_section_text;
-	uint32_t crc_section_data;
-	uint32_t crc_section_ccm_data;
-	uint32_t crc_section_vectors;
-	uint32_t end_magic;
-};
-
-It checks, if the start magic and end magic are set to the appropriate values and then patches in the CRC values of the sections.
-The magic values checked for are: 0xA8BE53F9 and 0xFFA582FF
-"""
-from elftools.elf.elffile import ELFFile
-from elftools.elf.segments import Segment
-import elftools.elf.constants as elf_const
-import sys
-import crcmod
-import crcmod.predefined
-import struct
-
-crc_calc = crcmod.predefined.mkCrcFun('crc-32-mpeg')
-
-if len(sys.argv) < 2:
-	print("Usage:", sys.argv[0], ' <elf file>')
-	sys.exit(-1)
-
-filename=sys.argv[1]
-
-def section_calculate_crc(section):
-	data = bytearray(section.data())
-	be_data = bytearray([0 for k in range(0, len(data))])
-	# Rearrange data, because the STM controller sees it as 32 bit little endian words
-	for i in range(0, int(len(data)/4)):
-		be_data[i*4+0] = data[i*4+3]
-		be_data[i*4+1] = data[i*4+2]
-		be_data[i*4+2] = data[i*4+1]
-		be_data[i*4+3] = data[i*4+0]
-
-	return crc_calc(be_data)
-
-with open(filename, 'r+b') as f:
-	elf = ELFFile(f)
-	sections = {}
-	sections['.text'] = elf.get_section_by_name('.text')
-	sections['.data'] = elf.get_section_by_name('.data')
-	sections['.ccmdata'] = elf.get_section_by_name('.ccmdata')
-	sections['.vectors'] = elf.get_section_by_name('.vectors')
-
-	for key, sec in sections.items():
-		if sec is None:
-			print("Error! Section", key, "not found in ELF file!")
-			sys.exit(-1)
-		print('Found section', key, 'Size:',
-			  sec.data_size, 'Type:', sec['sh_type'])
-		if sec['sh_type'] != 'SHT_PROGBITS':
-			print('Error! Section must be of type SHT_PROGBITS')
-			sys.exit(-1)
-		if (sec.data_size % 4 != 0):
-			print("Section", key, "has wrong size. Must be a multiple of 4 bytes!")
-			sys.exit(-1)
-
-	text_crc = section_calculate_crc(sections['.text'])
-	print('CRC of .text section:', hex(text_crc))
-	data_crc = section_calculate_crc(sections['.data'])
-	print('CRC of .data section:', hex(data_crc))
-	ccmdata_crc = section_calculate_crc(sections['.ccmdata'])
-	print('CRC of .ccmdata section:', hex(ccmdata_crc))
-	vextors_crc = section_calculate_crc(sections['.vectors'])
-	print('CRC of .vectors section:', hex(vextors_crc))
-
-	# Check the flashcrc section
-	flashcrc_sec = elf.get_section_by_name('.flashcrc')
-	if flashcrc_sec is None:
-		print('Section for flash CRC missing!')
-		sys.exit(-1)
-	if flashcrc_sec.data_size != 6*4:
-		print("Error: .flashcrc section has wrong size:",flashcrc_sec.data_size)
-		sys.exit(-1);
-
-	crc_sec_data = bytearray(flashcrc_sec.data())
-	magic1 = struct.unpack('<I'*1, bytes(crc_sec_data[0:4]))[0]
-	magic2 = struct.unpack('<I'*1, bytes(crc_sec_data[-4:]))[0]
-	print("CRC section magic values:", hex(magic1), hex(magic2))
-	if magic1 != 0xA8BE53F9 or magic2 != 0xFFA582FF:
-		print("Wrong magics in CRC section. Data misalignment?")
-		sys.exit(-2)
-
-	crc_sec_offset = flashcrc_sec['sh_offset']
-	print('CRC section ELF file offset:', hex(crc_sec_offset))
-	
-	crc_sec_data[4:8] = struct.pack('<I',text_crc)
-	crc_sec_data[8:12] = struct.pack('<I',data_crc)
-	crc_sec_data[12:16] = struct.pack('<I',ccmdata_crc)
-	crc_sec_data[16:20] = struct.pack('<I',vextors_crc)
-	f.seek(crc_sec_offset)
-	f.write(crc_sec_data)
-	print('CRCs patched successfully')
-
-	

stm-firmware/crc-patcher/requirements.txt

@@ -1,2 +0,0 @@
-crcmod==1.7
-pyelftools==0.27

stm-firmware/create-c-file-with-header.py

@@ -6,7 +6,7 @@ import pathlib
 
 license_header = """/* Reflow Oven Controller
 *
-* Copyright (C) 2020  Mario Hüttel <mario.huettel@gmx.net>
+* Copyright (C) 2022  Mario Hüttel <mario.huettel@gmx.net>
 *
 * This file is part of the Reflow Oven Controller Project.
 *
@@ -37,7 +37,7 @@ cpath = os.path.join(project_dir, sys.argv[1]+'.c')
 hfile = sys.argv[1]+'.h'
 hpath = os.path.join(module_include_dir, hfile)
 
-h_define = '__'+hfile.replace('.', '_').replace('-', '_').replace('/', '_').upper()+'__'
+h_define = '_'+hfile.replace('.', '_').replace('-', '_').replace('/', '_').upper()+'_'
 
 if os.path.exists(cpath) or os.path.exists(hpath):
 	print("File already exists! Abort!")

stm-firmware/create_version_header.sh

@@ -0,0 +1,15 @@
+#!/bin/bash
+
+if [[ -z $1 ]]; then
+	# Exit with error in case no output file is specified
+	exit -1
+fi
+
+firmware_version=`git describe --tags --always --dirty`
+commit=`git rev-parse HEAD`
+
+echo "#ifndef _VERSION_GENERATED_H_" > $1
+echo "#define _VERSION_GENERATED_H_" >> $1
+echo "#define GIT_VERSION_STRING \"$firmware_version\"" >> $1
+echo "#define GIT_FULL_COMMIT \"$commit\"" >> $1
+echo "#endif /* _VERSION_GENERATED_H_ */" >> $1

stm-firmware/fatfs/ffsystem.c

@@ -1,170 +1,208 @@
 /*------------------------------------------------------------------------*/
-/* Sample Code of OS Dependent Functions for FatFs                        */
-/* (C)ChaN, 2018                                                          */
+/* A Sample Code of User Provided OS Dependent Functions for FatFs        */
 /*------------------------------------------------------------------------*/
 
-
 #include <fatfs/ff.h>
 
 
-#if FF_USE_LFN == 3	/* Dynamic memory allocation */
+#if FF_USE_LFN == 3	/* Use dynamic memory allocation */
 
 /*------------------------------------------------------------------------*/
-/* Allocate a memory block                                                */
+/* Allocate/Free a Memory Block                                           */
 /*------------------------------------------------------------------------*/
 
+#include <stdlib.h>		/* with POSIX API */
+
+
 void* ff_memalloc (	/* Returns pointer to the allocated memory block (null if not enough core) */
 	UINT msize		/* Number of bytes to allocate */
 )
 {
-	return malloc(msize);	/* Allocate a new memory block with POSIX API */
+	return malloc((size_t)msize);	/* Allocate a new memory block */
 }
 
 
-/*------------------------------------------------------------------------*/
-/* Free a memory block                                                    */
-/*------------------------------------------------------------------------*/
-
 void ff_memfree (
-	void* mblock	/* Pointer to the memory block to free (nothing to do if null) */
+	void* mblock	/* Pointer to the memory block to free (no effect if null) */
 )
 {
-	free(mblock);	/* Free the memory block with POSIX API */
+	free(mblock);	/* Free the memory block */
 }
 
 #endif
 
 
 
+
 #if FF_FS_REENTRANT	/* Mutal exclusion */
-
 /*------------------------------------------------------------------------*/
-/* Create a Synchronization Object                                        */
+/* Definitions of Mutex                                                   */
 /*------------------------------------------------------------------------*/
-/* This function is called in f_mount() function to create a new
-/  synchronization object for the volume, such as semaphore and mutex.
-/  When a 0 is returned, the f_mount() function fails with FR_INT_ERR.
-*/
 
-//const osMutexDef_t Mutex[FF_VOLUMES];	/* Table of CMSIS-RTOS mutex */
+#define OS_TYPE	0	/* 0:Win32, 1:uITRON4.0, 2:uC/OS-II, 3:FreeRTOS, 4:CMSIS-RTOS */
 
 
-int ff_cre_syncobj (	/* 1:Function succeeded, 0:Could not create the sync object */
-	BYTE vol,			/* Corresponding volume (logical drive number) */
-	FF_SYNC_t* sobj		/* Pointer to return the created sync object */
-)
-{
-	/* Win32 */
-	*sobj = CreateMutex(NULL, FALSE, NULL);
-	return (int)(*sobj != INVALID_HANDLE_VALUE);
+#if   OS_TYPE == 0	/* Win32 */
+#include <windows.h>
+static HANDLE Mutex[FF_VOLUMES + 1];	/* Table of mutex handle */
 
-	/* uITRON */
-//	T_CSEM csem = {TA_TPRI,1,1};
-//	*sobj = acre_sem(&csem);
-//	return (int)(*sobj > 0);
+#elif OS_TYPE == 1	/* uITRON */
+#include "itron.h"
+#include "kernel.h"
+static mtxid Mutex[FF_VOLUMES + 1];		/* Table of mutex ID */
 
-	/* uC/OS-II */
-//	OS_ERR err;
-//	*sobj = OSMutexCreate(0, &err);
-//	return (int)(err == OS_NO_ERR);
+#elif OS_TYPE == 2	/* uc/OS-II */
+#include "includes.h"
+static OS_EVENT *Mutex[FF_VOLUMES + 1];	/* Table of mutex pinter */
 
-	/* FreeRTOS */
-//	*sobj = xSemaphoreCreateMutex();
-//	return (int)(*sobj != NULL);
+#elif OS_TYPE == 3	/* FreeRTOS */
+#include "FreeRTOS.h"
+#include "semphr.h"
+static SemaphoreHandle_t Mutex[FF_VOLUMES + 1];	/* Table of mutex handle */
 
-	/* CMSIS-RTOS */
-//	*sobj = osMutexCreate(&Mutex[vol]);
-//	return (int)(*sobj != NULL);
-}
-
-
-/*------------------------------------------------------------------------*/
-/* Delete a Synchronization Object                                        */
-/*------------------------------------------------------------------------*/
-/* This function is called in f_mount() function to delete a synchronization
-/  object that created with ff_cre_syncobj() function. When a 0 is returned,
-/  the f_mount() function fails with FR_INT_ERR.
-*/
-
-int ff_del_syncobj (	/* 1:Function succeeded, 0:Could not delete due to an error */
-	FF_SYNC_t sobj		/* Sync object tied to the logical drive to be deleted */
-)
-{
-	/* Win32 */
-	return (int)CloseHandle(sobj);
-
-	/* uITRON */
-//	return (int)(del_sem(sobj) == E_OK);
-
-	/* uC/OS-II */
-//	OS_ERR err;
-//	OSMutexDel(sobj, OS_DEL_ALWAYS, &err);
-//	return (int)(err == OS_NO_ERR);
-
-	/* FreeRTOS */
-//  vSemaphoreDelete(sobj);
-//	return 1;
-
-	/* CMSIS-RTOS */
-//	return (int)(osMutexDelete(sobj) == osOK);
-}
-
-
-/*------------------------------------------------------------------------*/
-/* Request Grant to Access the Volume                                     */
-/*------------------------------------------------------------------------*/
-/* This function is called on entering file functions to lock the volume.
-/  When a 0 is returned, the file function fails with FR_TIMEOUT.
-*/
-
-int ff_req_grant (	/* 1:Got a grant to access the volume, 0:Could not get a grant */
-	FF_SYNC_t sobj	/* Sync object to wait */
-)
-{
-	/* Win32 */
-	return (int)(WaitForSingleObject(sobj, FF_FS_TIMEOUT) == WAIT_OBJECT_0);
-
-	/* uITRON */
-//	return (int)(wai_sem(sobj) == E_OK);
-
-	/* uC/OS-II */
-//	OS_ERR err;
-//	OSMutexPend(sobj, FF_FS_TIMEOUT, &err));
-//	return (int)(err == OS_NO_ERR);
-
-	/* FreeRTOS */
-//	return (int)(xSemaphoreTake(sobj, FF_FS_TIMEOUT) == pdTRUE);
-
-	/* CMSIS-RTOS */
-//	return (int)(osMutexWait(sobj, FF_FS_TIMEOUT) == osOK);
-}
-
-
-/*------------------------------------------------------------------------*/
-/* Release Grant to Access the Volume                                     */
-/*------------------------------------------------------------------------*/
-/* This function is called on leaving file functions to unlock the volume.
-*/
-
-void ff_rel_grant (
-	FF_SYNC_t sobj	/* Sync object to be signaled */
-)
-{
-	/* Win32 */
-	ReleaseMutex(sobj);
-
-	/* uITRON */
-//	sig_sem(sobj);
-
-	/* uC/OS-II */
-//	OSMutexPost(sobj);
-
-	/* FreeRTOS */
-//	xSemaphoreGive(sobj);
-
-	/* CMSIS-RTOS */
-//	osMutexRelease(sobj);
-}
+#elif OS_TYPE == 4	/* CMSIS-RTOS */
+#include "cmsis_os.h"
+static osMutexId Mutex[FF_VOLUMES + 1];	/* Table of mutex ID */
 
 #endif
 
+
+
+/*------------------------------------------------------------------------*/
+/* Create a Mutex                                                         */
+/*------------------------------------------------------------------------*/
+/* This function is called in f_mount function to create a new mutex
+/  or semaphore for the volume. When a 0 is returned, the f_mount function
+/  fails with FR_INT_ERR.
+*/
+
+int ff_mutex_create (	/* Returns 1:Function succeeded or 0:Could not create the mutex */
+	int vol				/* Mutex ID: Volume mutex (0 to FF_VOLUMES - 1) or system mutex (FF_VOLUMES) */
+)
+{
+#if OS_TYPE == 0	/* Win32 */
+	Mutex[vol] = CreateMutex(NULL, FALSE, NULL);
+	return (int)(Mutex[vol] != INVALID_HANDLE_VALUE);
+
+#elif OS_TYPE == 1	/* uITRON */
+	T_CMTX cmtx = {TA_TPRI,1};
+
+	Mutex[vol] = acre_mtx(&cmtx);
+	return (int)(Mutex[vol] > 0);
+
+#elif OS_TYPE == 2	/* uC/OS-II */
+	OS_ERR err;
+
+	Mutex[vol] = OSMutexCreate(0, &err);
+	return (int)(err == OS_NO_ERR);
+
+#elif OS_TYPE == 3	/* FreeRTOS */
+	Mutex[vol] = xSemaphoreCreateMutex();
+	return (int)(Mutex[vol] != NULL);
+
+#elif OS_TYPE == 4	/* CMSIS-RTOS */
+	osMutexDef(cmsis_os_mutex);
+
+	Mutex[vol] = osMutexCreate(osMutex(cmsis_os_mutex));
+	return (int)(Mutex[vol] != NULL);
+
+#endif
+}
+
+
+/*------------------------------------------------------------------------*/
+/* Delete a Mutex                                                         */
+/*------------------------------------------------------------------------*/
+/* This function is called in f_mount function to delete a mutex or
+/  semaphore of the volume created with ff_mutex_create function.
+*/
+
+void ff_mutex_delete (	/* Returns 1:Function succeeded or 0:Could not delete due to an error */
+	int vol				/* Mutex ID: Volume mutex (0 to FF_VOLUMES - 1) or system mutex (FF_VOLUMES) */
+)
+{
+#if OS_TYPE == 0	/* Win32 */
+	CloseHandle(Mutex[vol]);
+
+#elif OS_TYPE == 1	/* uITRON */
+	del_mtx(Mutex[vol]);
+
+#elif OS_TYPE == 2	/* uC/OS-II */
+	OS_ERR err;
+
+	OSMutexDel(Mutex[vol], OS_DEL_ALWAYS, &err);
+
+#elif OS_TYPE == 3	/* FreeRTOS */
+	vSemaphoreDelete(Mutex[vol]);
+
+#elif OS_TYPE == 4	/* CMSIS-RTOS */
+	osMutexDelete(Mutex[vol]);
+
+#endif
+}
+
+
+/*------------------------------------------------------------------------*/
+/* Request a Grant to Access the Volume                                   */
+/*------------------------------------------------------------------------*/
+/* This function is called on enter file functions to lock the volume.
+/  When a 0 is returned, the file function fails with FR_TIMEOUT.
+*/
+
+int ff_mutex_take (	/* Returns 1:Succeeded or 0:Timeout */
+	int vol			/* Mutex ID: Volume mutex (0 to FF_VOLUMES - 1) or system mutex (FF_VOLUMES) */
+)
+{
+#if OS_TYPE == 0	/* Win32 */
+	return (int)(WaitForSingleObject(Mutex[vol], FF_FS_TIMEOUT) == WAIT_OBJECT_0);
+
+#elif OS_TYPE == 1	/* uITRON */
+	return (int)(tloc_mtx(Mutex[vol], FF_FS_TIMEOUT) == E_OK);
+
+#elif OS_TYPE == 2	/* uC/OS-II */
+	OS_ERR err;
+
+	OSMutexPend(Mutex[vol], FF_FS_TIMEOUT, &err));
+	return (int)(err == OS_NO_ERR);
+
+#elif OS_TYPE == 3	/* FreeRTOS */
+	return (int)(xSemaphoreTake(Mutex[vol], FF_FS_TIMEOUT) == pdTRUE);
+
+#elif OS_TYPE == 4	/* CMSIS-RTOS */
+	return (int)(osMutexWait(Mutex[vol], FF_FS_TIMEOUT) == osOK);
+
+#endif
+}
+
+
+
+/*------------------------------------------------------------------------*/
+/* Release a Grant to Access the Volume                                   */
+/*------------------------------------------------------------------------*/
+/* This function is called on leave file functions to unlock the volume.
+*/
+
+void ff_mutex_give (
+	int vol			/* Mutex ID: Volume mutex (0 to FF_VOLUMES - 1) or system mutex (FF_VOLUMES) */
+)
+{
+#if OS_TYPE == 0	/* Win32 */
+	ReleaseMutex(Mutex[vol]);
+
+#elif OS_TYPE == 1	/* uITRON */
+	unl_mtx(Mutex[vol]);
+
+#elif OS_TYPE == 2	/* uC/OS-II */
+	OSMutexPost(Mutex[vol]);
+
+#elif OS_TYPE == 3	/* FreeRTOS */
+	xSemaphoreGive(Mutex[vol]);
+
+#elif OS_TYPE == 4	/* CMSIS-RTOS */
+	osMutexRelease(Mutex[vol]);
+
+#endif
+}
+
+#endif	/* FF_FS_REENTRANT */
+

stm-firmware/fatfs/ffunicode.c

@@ -1,13 +1,13 @@
 /*------------------------------------------------------------------------*/
-/* Unicode handling functions for FatFs R0.13+                            */
+/* Unicode Handling Functions for FatFs R0.13 and Later                   */
+/*------------------------------------------------------------------------*/
+/* This module will occupy a huge memory in the .rodata section when the  */
+/* FatFs is configured for LFN with DBCS. If the system has a Unicode     */
+/* library for the code conversion, this module should be modified to use */
+/* it to avoid silly memory consumption.                                  */
 /*------------------------------------------------------------------------*/
-/* This module will occupy a huge memory in the .const section when the    /
-/  FatFs is configured for LFN with DBCS. If the system has any Unicode    /
-/  utilitiy for the code conversion, this module should be modified to use /
-/  that function to avoid silly memory consumption.                        /
-/-------------------------------------------------------------------------*/
 /*
-/ Copyright (C) 2014, ChaN, all right reserved.
+/ Copyright (C) 2022, ChaN, all right reserved.
 /
 / FatFs module is an open source software. Redistribution and use of FatFs in
 / source and binary forms, with or without modification, are permitted provided
@@ -25,7 +25,7 @@
 
 #include <fatfs/ff.h>
 
-#if FF_USE_LFN	/* This module will be blanked if non-LFN configuration */
+#if FF_USE_LFN != 0	/* This module will be blanked if in non-LFN configuration */
 
 #define MERGE2(a, b) a ## b
 #define CVTBL(tbl, cp) MERGE2(tbl, cp)
@@ -15214,8 +15214,8 @@ static const WCHAR uc869[] = {	/*  CP869(Greek 2) to Unicode conversion table */
 
 
 /*------------------------------------------------------------------------*/
-/* OEM <==> Unicode conversions for static code page configuration        */
-/* SBCS fixed code page                                                   */
+/* OEM <==> Unicode Conversions for Static Code Page Configuration with   */
+/* SBCS Fixed Code Page                                                   */
 /*------------------------------------------------------------------------*/
 
 #if FF_CODE_PAGE != 0 && FF_CODE_PAGE < 900
@@ -15267,8 +15267,8 @@ WCHAR ff_oem2uni (	/* Returns Unicode character in UTF-16, zero on error */
 
 
 /*------------------------------------------------------------------------*/
-/* OEM <==> Unicode conversions for static code page configuration        */
-/* DBCS fixed code page                                                   */
+/* OEM <==> Unicode Conversions for Static Code Page Configuration with   */
+/* DBCS Fixed Code Page                                                   */
 /*------------------------------------------------------------------------*/
 
 #if FF_CODE_PAGE >= 900
@@ -15346,7 +15346,7 @@ WCHAR ff_oem2uni (	/* Returns Unicode character in UTF-16, zero on error */
 
 
 /*------------------------------------------------------------------------*/
-/* OEM <==> Unicode conversions for dynamic code page configuration       */
+/* OEM <==> Unicode Conversions for Dynamic Code Page Configuration       */
 /*------------------------------------------------------------------------*/
 
 #if FF_CODE_PAGE == 0
@@ -15458,7 +15458,7 @@ WCHAR ff_oem2uni (	/* Returns Unicode character in UTF-16, zero on error */
 
 
 /*------------------------------------------------------------------------*/
-/* Unicode up-case conversion                                             */
+/* Unicode Up-case Conversion                                             */
 /*------------------------------------------------------------------------*/
 
 DWORD ff_wtoupper (	/* Returns up-converted code point */
@@ -15590,4 +15590,4 @@ DWORD ff_wtoupper (	/* Returns up-converted code point */
 }
 
 
-#endif /* #if FF_USE_LFN */
+#endif /* #if FF_USE_LFN != 0 */

stm-firmware/hw-version-detect.c

@@ -27,10 +27,15 @@
 #include <stm-periph/rcc-manager.h>
 #include <stm32/stm32f4xx.h>
 
+#if HW_REV_DETECT_PIN_LOW > HW_REV_DETECT_PIN_HIGH
+#error Configuration error for Hardware derection pins. Lowest position must be less than the highest pin position.
+#endif
+
 enum hw_revision get_pcb_hardware_version(void)
 {
 	uint8_t current_pin;
-	uint16_t port_bitmask = 0U;
+	uint16_t port_bitmask = 0U; /* Use uint16_t because a port can have 16 IOs max. */
+	const uint16_t highest_bit_mask = (1 << (HW_REV_DETECT_PIN_HIGH - HW_REV_DETECT_PIN_LOW));
 	static enum hw_revision revision = HW_REV_NOT_DETECTED;
 
 	/* If the revision has been previously detected,
@@ -53,7 +58,7 @@ enum hw_revision get_pcb_hardware_version(void)
 	 */
 	for (current_pin = HW_REV_DETECT_PIN_LOW; current_pin <= HW_REV_DETECT_PIN_HIGH; current_pin++) {
 		port_bitmask >>= 1;
-		port_bitmask |= (HW_REV_DETECT_GPIO->IDR & (1 << current_pin)) ? 0x0 : 0x80;
+		port_bitmask |= (HW_REV_DETECT_GPIO->IDR & (1 << current_pin)) ? 0x0 : highest_bit_mask;
 	}
 
 	/* Resolve the read in bitmask to a hardware version */

stm-firmware/include/fatfs/ff.h

@@ -1,8 +1,8 @@
 /*----------------------------------------------------------------------------/
-/  FatFs - Generic FAT Filesystem module  R0.14b                              /
+/  FatFs - Generic FAT Filesystem module  R0.15                               /
 /-----------------------------------------------------------------------------/
 /
-/ Copyright (C) 2021, ChaN, all right reserved.
+/ Copyright (C) 2022, ChaN, all right reserved.
 /
 / FatFs module is an open source software. Redistribution and use of FatFs in
 / source and binary forms, with or without modification, are permitted provided
@@ -20,7 +20,7 @@
 
 
 #ifndef FF_DEFINED
-#define FF_DEFINED	86631	/* Revision ID */
+#define FF_DEFINED	80286	/* Revision ID */
 
 #ifdef __cplusplus
 extern "C" {
@@ -131,10 +131,11 @@ extern const char* VolumeStr[FF_VOLUMES];	/* User defied volume ID */
 
 typedef struct {
 	BYTE	fs_type;		/* Filesystem type (0:not mounted) */
-	BYTE	pdrv;			/* Associated physical drive */
+	BYTE	pdrv;			/* Volume hosting physical drive */
+	BYTE	ldrv;			/* Logical drive number (used only when FF_FS_REENTRANT) */
 	BYTE	n_fats;			/* Number of FATs (1 or 2) */
-	BYTE	wflag;			/* win[] flag (b0:dirty) */
-	BYTE	fsi_flag;		/* FSINFO flags (b7:disabled, b0:dirty) */
+	BYTE	wflag;			/* win[] status (b0:dirty) */
+	BYTE	fsi_flag;		/* FSINFO status (b7:disabled, b0:dirty) */
 	WORD	id;				/* Volume mount ID */
 	WORD	n_rootdir;		/* Number of root directory entries (FAT12/16) */
 	WORD	csize;			/* Cluster size [sectors] */
@@ -147,9 +148,6 @@ typedef struct {
 #if FF_FS_EXFAT
 	BYTE*	dirbuf;			/* Directory entry block scratchpad buffer for exFAT */
 #endif
-#if FF_FS_REENTRANT
-	FF_SYNC_t	sobj;		/* Identifier of sync object */
-#endif
 #if !FF_FS_READONLY
 	DWORD	last_clst;		/* Last allocated cluster */
 	DWORD	free_clst;		/* Number of free clusters */
@@ -163,10 +161,10 @@ typedef struct {
 #endif
 #endif
 	DWORD	n_fatent;		/* Number of FAT entries (number of clusters + 2) */
-	DWORD	fsize;			/* Size of an FAT [sectors] */
+	DWORD	fsize;			/* Number of sectors per FAT */
 	LBA_t	volbase;		/* Volume base sector */
 	LBA_t	fatbase;		/* FAT base sector */
-	LBA_t	dirbase;		/* Root directory base sector/cluster */
+	LBA_t	dirbase;		/* Root directory base sector (FAT12/16) or cluster (FAT32/exFAT) */
 	LBA_t	database;		/* Data base sector */
 #if FF_FS_EXFAT
 	LBA_t	bitbase;		/* Allocation bitmap base sector */
@@ -181,7 +179,7 @@ typedef struct {
 
 typedef struct {
 	FATFS*	fs;				/* Pointer to the hosting volume of this object */
-	WORD	id;				/* Hosting volume mount ID */
+	WORD	id;				/* Hosting volume's mount ID */
 	BYTE	attr;			/* Object attribute */
 	BYTE	stat;			/* Object chain status (b1-0: =0:not contiguous, =2:contiguous, =3:fragmented in this session, b2:sub-directory stretched) */
 	DWORD	sclust;			/* Object data start cluster (0:no cluster or root directory) */
@@ -250,7 +248,7 @@ typedef struct {
 	WORD	ftime;			/* Modified time */
 	BYTE	fattrib;		/* File attribute */
 #if FF_USE_LFN
-	TCHAR	altname[FF_SFN_BUF + 1];/* Altenative file name */
+	TCHAR	altname[FF_SFN_BUF + 1];/* Alternative file name */
 	TCHAR	fname[FF_LFN_BUF + 1];	/* Primary file name */
 #else
 	TCHAR	fname[12 + 1];	/* File name */
@@ -298,8 +296,10 @@ typedef enum {
 
 
 
+
+/*--------------------------------------------------------------*/
+/* FatFs Module Application Interface                           */
 /*--------------------------------------------------------------*/
-/* FatFs module application interface                           */
 
 FRESULT f_open (FIL* fp, const TCHAR* path, BYTE mode);				/* Open or create a file */
 FRESULT f_close (FIL* fp);											/* Close an open file object */
@@ -336,6 +336,8 @@ int f_puts (const TCHAR* str, FIL* cp);								/* Put a string to the file */
 int f_printf (FIL* fp, const TCHAR* str, ...);						/* Put a formatted string to the file */
 TCHAR* f_gets (TCHAR* buff, int len, FIL* fp);						/* Get a string from the file */
 
+/* Some API fucntions are implemented as macro */
+
 #define f_eof(fp) ((int)((fp)->fptr == (fp)->obj.objsize))
 #define f_error(fp) ((fp)->err)
 #define f_tell(fp) ((fp)->fptr)
@@ -349,38 +351,43 @@ TCHAR* f_gets (TCHAR* buff, int len, FIL* fp);						/* Get a string from the fil
 
 
 /*--------------------------------------------------------------*/
-/* Additional user defined functions                            */
+/* Additional Functions                                         */
+/*--------------------------------------------------------------*/
 
-/* RTC function */
+/* RTC function (provided by user) */
 #if !FF_FS_READONLY && !FF_FS_NORTC
-DWORD get_fattime (void);
+DWORD get_fattime (void);	/* Get current time */
 #endif
 
-/* LFN support functions */
-#if FF_USE_LFN >= 1						/* Code conversion (defined in unicode.c) */
+
+/* LFN support functions (defined in ffunicode.c) */
+
+#if FF_USE_LFN >= 1
 WCHAR ff_oem2uni (WCHAR oem, WORD cp);	/* OEM code to Unicode conversion */
 WCHAR ff_uni2oem (DWORD uni, WORD cp);	/* Unicode to OEM code conversion */
 DWORD ff_wtoupper (DWORD uni);			/* Unicode upper-case conversion */
 #endif
+
+
+/* O/S dependent functions (samples available in ffsystem.c) */
+
 #if FF_USE_LFN == 3		/* Dynamic memory allocation */
 void* ff_memalloc (UINT msize);		/* Allocate memory block */
 void ff_memfree (void* mblock);		/* Free memory block */
 #endif
-
-/* Sync functions */
-#if FF_FS_REENTRANT
-int ff_cre_syncobj (BYTE vol, FF_SYNC_t* sobj);	/* Create a sync object */
-int ff_req_grant (FF_SYNC_t sobj);		/* Lock sync object */
-void ff_rel_grant (FF_SYNC_t sobj);		/* Unlock sync object */
-int ff_del_syncobj (FF_SYNC_t sobj);	/* Delete a sync object */
+#if FF_FS_REENTRANT	/* Sync functions */
+int ff_mutex_create (int vol);		/* Create a sync object */
+void ff_mutex_delete (int vol);		/* Delete a sync object */
+int ff_mutex_take (int vol);		/* Lock sync object */
+void ff_mutex_give (int vol);		/* Unlock sync object */
 #endif
 
 
 
 
 /*--------------------------------------------------------------*/
-/* Flags and offset address                                     */
-
+/* Flags and Offset Address                                     */
+/*--------------------------------------------------------------*/
 
 /* File access mode and open method flags (3rd argument of f_open) */
 #define	FA_READ				0x01

stm-firmware/include/fatfs/ffconf.h

@@ -1,8 +1,8 @@
 /*---------------------------------------------------------------------------/
-/  FatFs Functional Configurations
+/  Configurations of FatFs Module
 /---------------------------------------------------------------------------*/
 
-#define FFCONF_DEF	86631	/* Revision ID */
+#define FFCONF_DEF	80286	/* Revision ID */
 
 /*---------------------------------------------------------------------------/
 / Function Configurations
@@ -68,7 +68,7 @@
 /   2: Enable with LF-CRLF conversion.
 /
 /  FF_PRINT_LLI = 1 makes f_printf() support long long argument and FF_PRINT_FLOAT = 1/2
-   makes f_printf() support floating point argument. These features want C99 or later.
+/  makes f_printf() support floating point argument. These features want C99 or later.
 /  When FF_LFN_UNICODE >= 1 with LFN enabled, string functions convert the character
 /  encoding in it. FF_STRF_ENCODE selects assumption of character encoding ON THE FILE
 /  to be read/written via those functions.
@@ -178,7 +178,7 @@
 /  logical drives. Number of items must not be less than FF_VOLUMES. Valid
 /  characters for the volume ID strings are A-Z, a-z and 0-9, however, they are
 /  compared in case-insensitive. If FF_STR_VOLUME_ID >= 1 and FF_VOLUME_STRS is
-/  not defined, a user defined volume string table needs to be defined as:
+/  not defined, a user defined volume string table is needed as:
 /
 /  const char* VolumeStr[FF_VOLUMES] = {"ram","flash","sd","usb",...
 */
@@ -190,7 +190,7 @@
 /  number and only an FAT volume found on the physical drive will be mounted.
 /  When this function is enabled (1), each logical drive number can be bound to
 /  arbitrary physical drive and partition listed in the VolToPart[]. Also f_fdisk()
-/  funciton will be available. */
+/  function will be available. */
 
 
 #define FF_MIN_SS		512
@@ -240,10 +240,10 @@
 #define FF_FS_NORTC		0
 #define FF_NORTC_MON	1
 #define FF_NORTC_MDAY	1
-#define FF_NORTC_YEAR	2020
-/* The option FF_FS_NORTC switches timestamp functiton. If the system does not have
-/  any RTC function or valid timestamp is not needed, set FF_FS_NORTC = 1 to disable
-/  the timestamp function. Every object modified by FatFs will have a fixed timestamp
+#define FF_NORTC_YEAR	2022
+/* The option FF_FS_NORTC switches timestamp feature. If the system does not have
+/  an RTC or valid timestamp is not needed, set FF_FS_NORTC = 1 to disable the
+/  timestamp feature. Every object modified by FatFs will have a fixed timestamp
 /  defined by FF_NORTC_MON, FF_NORTC_MDAY and FF_NORTC_YEAR in local time.
 /  To enable timestamp function (FF_FS_NORTC = 0), get_fattime() function need to be
 /  added to the project to read current time form real-time clock. FF_NORTC_MON,
@@ -253,7 +253,7 @@
 
 #define FF_FS_NOFSINFO	0
 /* If you need to know correct free space on the FAT32 volume, set bit 0 of this
-/  option, and f_getfree() function at first time after volume mount will force
+/  option, and f_getfree() function at the first time after volume mount will force
 /  a full FAT scan. Bit 1 controls the use of last allocated cluster number.
 /
 /  bit0=0: Use free cluster count in the FSINFO if available.
@@ -275,26 +275,21 @@
 /      lock control is independent of re-entrancy. */
 
 
-/* #include <somertos.h>	// O/S definitions */
 #define FF_FS_REENTRANT	0
 #define FF_FS_TIMEOUT	1000
-#define FF_SYNC_t		HANDLE
 /* The option FF_FS_REENTRANT switches the re-entrancy (thread safe) of the FatFs
 /  module itself. Note that regardless of this option, file access to different
 /  volume is always re-entrant and volume control functions, f_mount(), f_mkfs()
 /  and f_fdisk() function, are always not re-entrant. Only file/directory access
-/  to the same volume is under control of this function.
+/  to the same volume is under control of this featuer.
 /
-/   0: Disable re-entrancy. FF_FS_TIMEOUT and FF_SYNC_t have no effect.
+/   0: Disable re-entrancy. FF_FS_TIMEOUT have no effect.
 /   1: Enable re-entrancy. Also user provided synchronization handlers,
-/      ff_req_grant(), ff_rel_grant(), ff_del_syncobj() and ff_cre_syncobj()
-/      function, must be added to the project. Samples are available in
-/      option/syscall.c.
+/      ff_mutex_create(), ff_mutex_delete(), ff_mutex_take() and ff_mutex_give()
+/      function, must be added to the project. Samples are available in ffsystem.c.
 /
-/  The FF_FS_TIMEOUT defines timeout period in unit of time tick.
-/  The FF_SYNC_t defines O/S dependent sync object type. e.g. HANDLE, ID, OS_EVENT*,
-/  SemaphoreHandle_t and etc. A header file for O/S definitions needs to be
-/  included somewhere in the scope of ff.h. */
+/  The FF_FS_TIMEOUT defines timeout period in unit of O/S time tick.
+*/
 
 
 

stm-firmware/include/reflow-controller/hw-version-detect.h

@@ -48,7 +48,6 @@
  */
 #define HW_REV_DETECT_PIN_HIGH (15U)
 
-
 /**
  * @brief PCB/Hardware Revision Type
  */

stm-firmware/include/reflow-controller/main-cycle-counter.h

@@ -30,10 +30,16 @@
 #include <stdint.h>
 
 /**
- * @brief Initialize/Reset the main cycle counter to 0.
+ * @brief Initialize the main cycle counter and reset to 0. This also enables the core cycle counter
  * This function can be called multiple times.
  */
-void main_cycle_counter_init(void);
+void main_and_core_cycle_counter_init(void);
+
+/**
+ * @brief Reset the main cycle counter.
+ * @note This does not reset the core cycle counter
+ */
+void main_cycle_counter_reset(void);
 
 /**
  * @brief Increment the main cycle counter by 1
@@ -46,6 +52,18 @@ void main_cycle_counter_inc(void);
  */
 uint64_t main_cycle_counter_get(void);
 
+/**
+ * @brief Reset the core cycle counter to 0
+ */
+void core_cycle_counter_reset(void);
+
+/**
+ * @brief Get the current value of the core cycle counter
+ * 
+ * @return uint32_t Counter value
+ */
+uint32_t core_cycle_counter_get(void);
+
 #endif /* __MAIN_CYCLE_COUNTER_H__ */
 
 /** @} */

stm-firmware/include/reflow-controller/safety/flash-crc-struct.h

@@ -0,0 +1,37 @@
+/* Reflow Oven Controller
+*
+* Copyright (C) 2022  Mario Hüttel <mario.huettel@gmx.net>
+*
+* This file is part of the Reflow Oven Controller Project.
+*
+* The reflow oven controller is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+* The Reflow Oven Control Firmware is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with the reflow oven controller project.
+* If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _SAFETY_FLASH_CRC_STRUCT_H_
+#define _SAFETY_FLASH_CRC_STRUCT_H_
+
+#include <stdint.h>
+
+struct flash_crcs {
+    uint32_t start_magic;
+    uint32_t crc_section_text;
+    uint32_t crc_section_data;
+    uint32_t crc_section_ccm_data;
+    uint32_t crc_section_vectors;
+    uint32_t end_magic;
+};
+
+extern const struct flash_crcs crcs_in_flash;
+
+#endif /* _SAFETY_FLASH_CRC_STRUCT_H_ */

stm-firmware/include/reflow-controller/safety/flash-crc.h

@@ -0,0 +1,56 @@
+/* Reflow Oven Controller
+*
+* Copyright (C) 2022  Mario Hüttel <mario.huettel@gmx.net>
+*
+* This file is part of the Reflow Oven Controller Project.
+*
+* The reflow oven controller is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+* The Reflow Oven Control Firmware is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with the reflow oven controller project.
+* If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _SAFETY_FLASH_CRC_H_
+#define _SAFETY_FLASH_CRC_H_
+
+#include <stdint.h>
+
+enum flash_crc_section {
+    FLASH_CRC_VECTOR = 0,
+    FLASH_CRC_TEXT,
+    FLASH_CRC_DATA,
+    FLASH_CRC_CCMDATA,
+    N_FLASH_CRC,
+};
+
+/**
+ * @brief Perform a CRC check of the flash memory and set appropriate flags
+ * @return negative if internal error occured. Otherwise (independent from CRC check result) 0.
+ * @note This function requires the safety controller (and CRC unit) to be set up before calling!
+ */
+int flash_crc_trigger_check(void);
+
+/**
+ * @brief Calculate CRC over flash section
+ * @param sec Section to calculate CRC over
+ * @param[out] crc_result Calculated CRC
+ * @return negative if internal error occured. Otherwise (independent from CRC check result) 0.
+ */
+int flash_crc_calc_section(enum flash_crc_section sec, uint32_t *crc_result);
+
+/**
+ * @brief Get expected CRC value of a section
+ * @param sec Section
+ * @return Expected CRC
+ */
+uint32_t flash_crc_get_expected_crc(enum flash_crc_section sec);
+
+#endif /* _SAFETY_FLASH_CRC_H_ */

stm-firmware/include/reflow-controller/safety/safety-config.h

@@ -27,6 +27,15 @@
 #ifndef __SAFETY_CONFIG_H__
 #define __SAFETY_CONFIG_H__
 
+/**
+ * @brief Weights of error flags.
+ */
+enum config_weight {
+    SAFETY_FLAG_CONFIG_WEIGHT_NONE = 0, /**< @brief This flag has no global error consequence, but might be respected by certain software modules. */
+    SAFETY_FLAG_CONFIG_WEIGHT_PID = 1, /**< @brief This flag will force a stop of the temperature PID controller */
+    SAFETY_FLAG_CONFIG_WEIGHT_PANIC = 2, /**< @brief This flag will trigger the panic mode */
+};
+
 /**
  * @brief Enum type representing safety flags.
  *
@@ -60,6 +69,7 @@ enum safety_flag {
 	ERR_FLAG_FLASH_CRC_DATA = (1<<20),
 	ERR_FLAG_CFG_CRC_MEAS_ADC = (1<<21),
 	ERR_FLAG_CFG_CRC_SAFETY_ADC = (1<<22),
+	ERR_FLAG_CFG_CRC_MISC = (1<<23),
 };
 
 /**
@@ -78,6 +88,7 @@ enum timing_monitor {
 enum crc_monitor {
 	ERR_CRC_MON_MEAS_ADC = 0,
 	ERR_CRC_MON_SAFETY_ADC,
+	ERR_CRC_MON_MISC,
 	N_ERR_CRC_MON
 };
 
@@ -115,7 +126,15 @@ enum analog_value_monitor {
 #define WATCHDOG_HALT_DEBUG (0)
 #endif
 
-#define WATCHDOG_PRESCALER 16
+/**
+ * @brief Watchdog clock prescaler value
+ */
+#define WATCHDOG_PRESCALER (16)
+
+/**
+ * @brief Watchdog reload value
+ */
+#define WATCHDOG_RELOAD_VALUE (2500)
 
 /**
  * @brief Minimum number of bytes that have to be free on the stack. If this is not the case, an error is detected
@@ -159,7 +178,13 @@ enum analog_value_monitor {
 #define SAFETY_CRC_MON_SAFETY_ADC_PW 0xA8DF2368
 
 /**
- * @brief Default persistence of safety flags. These values are loaded into the safety tables on startup
+ * @brief Password for resetting ERR_CRC_MON_MISC
+ * 
+ */
+#define SAFETY_CRC_MON_MISC_PW 0x9A62E96A
+
+/**
+ * @brief Default persistence of safety flags. These values are loaded into the safety tables on startup.
  */
 #define SAFETY_CONFIG_DEFAULT_PERSIST	ERR_FLAG_PERSIST_ENTRY(ERR_FLAG_MEAS_ADC_OFF, false), \
 					ERR_FLAG_PERSIST_ENTRY(ERR_FLAG_MEAS_ADC_WATCHDOG, false), \
@@ -184,8 +209,9 @@ enum analog_value_monitor {
 					ERR_FLAG_PERSIST_ENTRY(ERR_FLAG_FLASH_CRC_DATA, true), \
 					ERR_FLAG_PERSIST_ENTRY(ERR_FLAG_CFG_CRC_MEAS_ADC, true), \
 					ERR_FLAG_PERSIST_ENTRY(ERR_FLAG_CFG_CRC_SAFETY_ADC, true), \
+					ERR_FLAG_PERSIST_ENTRY(ERR_FLAG_CFG_CRC_MISC, true),
 /**
- * @brief Default config weights of safety flags. These values are loaded into the safety tables on startup
+ * @brief Default config weights of safety flags. These values are loaded into the safety tables on startup.
  */
 #define SAFETY_CONFIG_DEFAULT_WEIGHTS 	ERR_FLAG_WEIGHT_ENTRY(ERR_FLAG_MEAS_ADC_OFF, SAFETY_FLAG_CONFIG_WEIGHT_PID), \
 			ERR_FLAG_WEIGHT_ENTRY(ERR_FLAG_MEAS_ADC_WATCHDOG, SAFETY_FLAG_CONFIG_WEIGHT_PID), \
@@ -206,9 +232,10 @@ enum analog_value_monitor {
 			ERR_FLAG_WEIGHT_ENTRY(ERR_FLAG_SAFETY_TAB_CORRUPT, SAFETY_FLAG_CONFIG_WEIGHT_PANIC), \
 			ERR_FLAG_WEIGHT_ENTRY(ERR_FLAG_AMON_SUPPLY_VOLT, SAFETY_FLAG_CONFIG_WEIGHT_PID), \
 			ERR_FLAG_WEIGHT_ENTRY(ERR_FLAG_OVERTEMP, SAFETY_FLAG_CONFIG_WEIGHT_PID), \
-			ERR_FLAG_WEIGHT_ENTRY(ERR_FLAG_FLASH_CRC_CODE, SAFETY_FLAG_CONFIG_WEIGHT_NONE), \
-			ERR_FLAG_WEIGHT_ENTRY(ERR_FLAG_FLASH_CRC_DATA, SAFETY_FLAG_CONFIG_WEIGHT_NONE), \
-			ERR_FLAG_WEIGHT_ENTRY(ERR_FLAG_CFG_CRC_MEAS_ADC, SAFETY_FLAG_CONFIG_WEIGHT_NONE), \
-			ERR_FLAG_WEIGHT_ENTRY(ERR_FLAG_CFG_CRC_SAFETY_ADC, SAFETY_FLAG_CONFIG_WEIGHT_NONE), \
+			ERR_FLAG_WEIGHT_ENTRY(ERR_FLAG_FLASH_CRC_CODE, SAFETY_FLAG_CONFIG_WEIGHT_PANIC), \
+			ERR_FLAG_WEIGHT_ENTRY(ERR_FLAG_FLASH_CRC_DATA, SAFETY_FLAG_CONFIG_WEIGHT_PANIC), \
+			ERR_FLAG_WEIGHT_ENTRY(ERR_FLAG_CFG_CRC_MEAS_ADC, SAFETY_FLAG_CONFIG_WEIGHT_PID), \
+			ERR_FLAG_WEIGHT_ENTRY(ERR_FLAG_CFG_CRC_SAFETY_ADC, SAFETY_FLAG_CONFIG_WEIGHT_PANIC), \
+			ERR_FLAG_WEIGHT_ENTRY(ERR_FLAG_CFG_CRC_MISC, SAFETY_FLAG_CONFIG_WEIGHT_PANIC)			
 
 #endif /* __SAFETY_CONFIG_H__ */

stm-firmware/include/reflow-controller/safety/safety-controller.h

@@ -70,14 +70,14 @@ struct timing_monitor_info {
  * You have to call safety_controller_handle
  * If this function fails, it will hang, because errors in the safety controller are not recoverable
  */
-void safety_controller_init();
+void safety_controller_init(void);
 
 /**
  * @brief Handle the safety controller.
  * @note This function must be executed periodically in order to prevent the watchdog from resetting the firmware
- * @return 0 if successful
+ * @returns Worst flag weigth that is currently set.
  */
-int safety_controller_handle();
+enum config_weight safety_controller_handle(void);
 
 /**
  * @brief Report one or multiple errors to the safety controller
@@ -170,13 +170,13 @@ bool safety_controller_get_flags_by_mask(enum safety_flag mask);
  * @brief Get the count of error flags
  * @return Error flag count
  */
-uint32_t safety_controller_get_flag_count();
+uint32_t safety_controller_get_flag_count(void);
 
 /**
  * @brief Get the count of analog monitors
  * @return Analog monitor count
  */
-uint32_t safety_controller_get_analog_monitor_count();
+uint32_t safety_controller_get_analog_monitor_count(void);
 
 /**
  * @brief Get an error flag's name by its index.
@@ -267,13 +267,6 @@ int safety_controller_set_overtemp_limit(float over_temperature);
  */
 float safety_controller_get_overtemp_limit(void);
 
-/**
- * @brief Perform a CRC check of the flash memory and set appropriate flags
- * @return negative if internal error occured. Otherwise (independent from CRC check result) 0.
- * @note This function requires the safety controller to be set up before!
- */
-int safety_controller_trigger_flash_crc_check(void);
-
 /**
  * @brief Recalculate the CRC of a given CRC Monitor. This has to be done once the supervised registers update
  * @param mon Monitor to recalculate

stm-firmware/include/reflow-controller/safety/safety-memory.h

@@ -24,6 +24,7 @@
 #include <stdint.h>
 #include <stddef.h>
 #include <stdbool.h>
+#include <reflow-controller/safety/safety-config.h>
 
 /** @addtogroup safety-memory
  * @{
@@ -131,15 +132,6 @@ enum config_override_entry_type {
 	SAFETY_MEMORY_CONFIG_OVERRIDE_PERSISTENCE = 2,
 };
 
-/**
- * @brief Weights of error flags.
- */
-enum config_weight {
-	SAFETY_FLAG_CONFIG_WEIGHT_NONE = 0, /**< @brief This flag has no global error consequence, but might be respected by certain software modules. */
-	SAFETY_FLAG_CONFIG_WEIGHT_PID = 1, /**< @brief This flag will force a stop of the temperature PID controller */
-	SAFETY_FLAG_CONFIG_WEIGHT_PANIC = 2, /**< @brief This flag will trigger the panic mode */
-};
-
 /**
  * @brief representation of a config override memory entry
  */

stm-firmware/include/reflow-controller/safety/watchdog.h

@@ -27,11 +27,19 @@
 
 /**
  * @brief Setup the watchdog for the safety controller
- * @param Prescaler to use for the 32 KHz LSI clock
+ *
+ * The watchdog timeout can be calculated with:
+ * \f[ t = \frac{(\mathrm{RELOAD_VAL} + 1)\cdot \mathrm{PRESCALER}}{32000 } s\f]
+ *
+ * Valid prescaler values are: 4, 8, 16, 32, 64, 128, 256.
+ * @param prescaler Prescaler to use for the 32 KHz LSI clock
+ * @param reload_value Reload value to reload the timer with when reset. 0 to 0xFFF
  * @return 0 if successful
+ * @return -1 if prescaler is wrong
+ * @return -2 if a reload value > 0xFFF is selected. 0xFFF will be used in this case
  * @note Once the watchdog is enabled, it cannot be turned off!
  */
-int watchdog_setup(uint8_t prescaler);
+int watchdog_setup(uint16_t prescaler, uint16_t reload_value);
 
 /**
  * @brief Reset watchdog counter

stm-firmware/include/reflow-controller/sd.h

@@ -0,0 +1,42 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2022  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * GDSII-Converter is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+ #ifndef _SD_H_
+ #define _SD_H_
+
+#include <stdbool.h>
+#include <fatfs/ff.h>
+
+/**
+ * @brief Mount the SD card if available and not already mounted
+ * @param fs Filesystem to mount to.
+ * @return true if mounted, false if an error occured or the SD is not inserted and cannot be mounted
+ */
+bool mount_sd_card_if_avail(FATFS *fs);
+
+/**
+ * @brief Return whether an SD card is inserted and mounted
+ * 
+ * @return true SD inserted and mounted
+ * @return false No SD inserted or not mounted
+ */
+bool sd_card_is_mounted(void);
+
+#endif /* _SD_H_ */

stm-firmware/include/reflow-controller/settings/spi-eeprom.h

@@ -28,12 +28,12 @@
  * @brief Initialize the SPI for the eeprom.
  * @return 0 if succesful
  */
-int spi_eeprom_init();
+int spi_eeprom_init(void);
 
 /**
  * @brief Uninitialize the SPI EEPROM
  */
-void spi_eeprom_deinit();
+void spi_eeprom_deinit(void);
 
 /**
  * @brief Read from SPI EEPROM

stm-firmware/include/reflow-controller/version.h

@@ -0,0 +1,29 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2022  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The Reflow Oven Control Firmware is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _VERSION_H_
+#define _VERSION_H_
+
+extern const char *version_git_version_string;
+extern const char *version_git_full_commit_string;
+extern const char *version_compile_date;
+extern const char *version_compile_time;
+
+#endif /* _VERSION_H_ */

stm-firmware/include/stm-periph/rng.h

@@ -33,7 +33,7 @@ enum random_number_error {
 
 void random_number_gen_init(bool int_enable);
 
-void random_number_gen_deinit();
+void random_number_gen_deinit(void);
 
 void random_number_gen_reset(bool int_en);
 

stm-firmware/include/stm-periph/unique-id.h

@@ -33,4 +33,6 @@ void stm_unique_id_get(uint32_t *high, uint32_t *mid, uint32_t *low);
 
 void stm_dev_rev_id_get(uint32_t *device_id, uint32_t *revision_id);
 
+void stm_cpuid_get(uint8_t *implementer, uint8_t *variant, uint16_t *part_no, uint8_t *rev);
+
 #endif /* __UNIQUE_ID_H__ */

stm-firmware/main-cycle-counter.c

@@ -25,6 +25,7 @@
 
 #include <reflow-controller/main-cycle-counter.h>
 #include <helper-macros/helper-macros.h>
+#include <stm32/stm32f4xx.h>
 
 /**
  * @brief Variable storing the main cycle counter.
@@ -33,7 +34,22 @@
  */
 static uint64_t IN_SECTION(.ccm.bss) main_cycle_counter;
 
-void main_cycle_counter_init(void)
+void main_and_core_cycle_counter_init(void)
+{
+	CoreDebug->DEMCR |= CoreDebug_DEMCR_TRCENA_Msk;	
+
+	/* Enable the core cycle counter if available on current processor */
+	if (!(DWT->CTRL & DWT_CTRL_NOCYCCNT_Msk)) {
+		/* Cycle counter is available. Enable */
+		DWT->CTRL |= DWT_CTRL_CYCCNTENA_Msk;
+	}
+
+	/* Reset the counters to 0 */
+	main_cycle_counter_reset();
+	core_cycle_counter_reset();
+}	
+
+void main_cycle_counter_reset(void)
 {
 	main_cycle_counter = 0ULL;
 }
@@ -48,4 +64,14 @@ uint64_t main_cycle_counter_get(void)
 	return main_cycle_counter;
 }
 
+void core_cycle_counter_reset(void)
+{
+	DWT->CYCCNT = 0UL;
+}
+
+uint32_t core_cycle_counter_get(void)
+{
+	return DWT->CYCCNT;
+}
+
 /** @} */

stm-firmware/main.c

@@ -23,6 +23,7 @@
  * @brief Main file for firmware
  */
 
+#include "reflow-controller/safety/safety-config.h"
 #include <stdlib.h>
 #include <stdio.h>
 #include <string.h>
@@ -32,13 +33,13 @@
 #include <reflow-controller/systick.h>
 #include <reflow-controller/adc-meas.h>
 #include <reflow-controller/digio.h>
-#include "fatfs/shimatta_sdio_driver/shimatta_sdio.h"
 #include <stm-periph/stm32-gpio-macros.h>
 #include <stm-periph/rcc-manager.h>
 #include <stm-periph/uart.h>
 #include <reflow-controller/periph-config/shell-uart-config.h>
 #include <reflow-controller/oven-driver.h>
 #include <fatfs/ff.h>
+#include <reflow-controller/sd.h>
 #include <reflow-controller/ui/gui.h>
 #include <reflow-controller/ui/shell.h>
 #include <reflow-controller/ui/shell-uart.h>
@@ -88,40 +89,6 @@ static inline void uart_gpio_config(void)
 #endif
 }
 
-/**
- * @brief Mount the SD card if available and not already mounted
- * @param mounted The current mounting state of the SD card
- * @return true if mounted, false if an error occured or the SD is not inserted and cannot be mounted
- */
-static bool mount_sd_card_if_avail(bool mounted)
-{
-	FRESULT res;
-	static uint8_t IN_SECTION(.ccm.bss) inserted_counter = 0;
-
-	if (sdio_check_inserted() && mounted) {
-		memset(fs_ptr, 0, sizeof(FATFS));
-		sdio_stop_clk();
-		inserted_counter = 0;
-		return false;
-	}
-
-	if (!sdio_check_inserted() && inserted_counter < 255)
-		inserted_counter++;
-
-	if (!sdio_check_inserted() && !mounted && inserted_counter > 4) {
-		inserted_counter = 0;
-		res = f_mount(fs_ptr, "0:/", 1);
-		if (res == FR_OK) {
-			led_set(1, 1);
-			return true;
-		} else {
-			return false;
-		}
-	}
-
-	return mounted;
-}
-
 /**
  * @brief Process the boot status structure in the safety (backup) RAM
  * Depending on the flags set there, this function will:
@@ -249,6 +216,9 @@ static inline void setup_system(void)
 
 	/** - Enable the ADC for PT1000 measurement */
 	adc_pt1000_setup_meas();
+
+	/** - Enable the misc CRC config monitor to supervise clock, systick and flash settings */
+	(void)safety_controller_set_crc_monitor(ERR_CRC_MON_MISC, SAFETY_CRC_MON_MISC_PW);
 }
 
 /**
@@ -286,6 +256,7 @@ int main(void)
 	shellmatta_handle_t shell_handle;
 	int menu_wait_request;
 	uint64_t quarter_sec_timestamp = 0ULL;
+	enum config_weight worst_safety_flag = SAFETY_FLAG_CONFIG_WEIGHT_NONE;
 
 	/** - Setup all the peripherals and external componets like LCD, EEPROM etc. and the safety controller */
 	setup_system();
@@ -301,8 +272,8 @@ int main(void)
 	/** - Print motd to shell */
 	shell_print_motd(shell_handle);
 
-	/** - Set the main cycle counter to 0 */
-	main_cycle_counter_init();
+	/** - Set the main cycle counter to 0 and activate the core cycle counter if available */
+	main_and_core_cycle_counter_init();
 
 	/** - Do a loop over the following */
 	while (1) {
@@ -312,9 +283,9 @@ int main(void)
 		 *  it is tried to load it from SD card.
 		 */
 		if (systick_ticks_have_passed(quarter_sec_timestamp, 250)) {
-			led_set(1, 0);
+			led_set(1u, 0);
 			sd_old = sd_card_mounted;
-			sd_card_mounted = mount_sd_card_if_avail(sd_card_mounted);
+			sd_card_mounted = mount_sd_card_if_avail(fs_ptr);
 
 			if (sd_card_mounted && !sd_old) {
 				adc_pt1000_get_resistance_calibration(NULL, NULL, &cal_active);
@@ -325,6 +296,14 @@ int main(void)
 				}
 			}
 
+			/* Check if any flags are present, that disable the PID controller. Blink
+			 * LED 0 in this case
+			 */
+			if (worst_safety_flag >= SAFETY_FLAG_CONFIG_WEIGHT_PID)
+				led_set(0u, led_get(0u) ? 0 : 1);
+			else
+				led_set(0u, 0);
+
 			quarter_sec_timestamp = systick_get_global_tick();
 		}
 
@@ -338,7 +317,7 @@ int main(void)
 		temp_profile_executer_handle();
 
 		/** - Handle the safety controller. This must be called! Otherwise a watchdog reset will occur */
-		safety_controller_handle();
+		worst_safety_flag = safety_controller_handle();
 
 		/** - If the Oven PID controller is running, we handle its sample function */
 		if (oven_pid_get_status() == OVEN_PID_RUNNING)

stm-firmware/safety/fault.c

@@ -78,5 +78,6 @@ void panic_mode(void)
 	}
 
 	/* Let the watchdog do the rest */
-	while (1);
+	while (1)
+		;
 }

stm-firmware/safety/flash-crc-struct.c

@@ -0,0 +1,31 @@
+/* Reflow Oven Controller
+*
+* Copyright (C) 2022  Mario Hüttel <mario.huettel@gmx.net>
+*
+* This file is part of the Reflow Oven Controller Project.
+*
+* The reflow oven controller is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+* The Reflow Oven Control Firmware is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with the reflow oven controller project.
+* If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <reflow-controller/safety/flash-crc-struct.h>
+#include <helper-macros/helper-macros.h>
+
+const struct flash_crcs IN_SECTION(.flashcrc) crcs_in_flash = {
+	.start_magic = 0xA8BE53F9UL,
+	.crc_section_ccm_data = 0UL,
+	.crc_section_text = 0UL,
+	.crc_section_data = 0UL,
+	.crc_section_vectors = 0UL,
+	.end_magic = 0xFFA582FFUL,
+};

stm-firmware/safety/flash-crc.c

@@ -0,0 +1,152 @@
+/* Reflow Oven Controller
+*
+* Copyright (C) 2022  Mario Hüttel <mario.huettel@gmx.net>
+*
+* This file is part of the Reflow Oven Controller Project.
+*
+* The reflow oven controller is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+* The Reflow Oven Control Firmware is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with the reflow oven controller project.
+* If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <reflow-controller/safety/flash-crc.h>
+#include <reflow-controller/safety/flash-crc-struct.h>
+#include <reflow-controller/safety/safety-controller.h>
+#include <stm-periph/crc-unit.h>
+
+extern const uint32_t __ld_vectors_start;
+extern const uint32_t __ld_vectors_end;
+extern const uint32_t __ld_text_start;
+extern const uint32_t __ld_text_end;
+
+extern const uint32_t __ld_sdata_ccm;
+extern const uint32_t __ld_edata_ccm;
+extern const uint32_t __ld_load_ccm_data;
+
+extern const uint32_t __ld_sdata;
+extern const uint32_t __ld_edata;
+extern const uint32_t __ld_load_data;
+
+
+int flash_crc_trigger_check(void)
+{
+	int ret = -1;
+	int res;
+	int any_err = 0;
+	uint32_t crc;
+
+	/* Perform CRC check over vector table */
+	res = flash_crc_calc_section(FLASH_CRC_VECTOR, &crc);
+	if (res || crc != flash_crc_get_expected_crc(FLASH_CRC_VECTOR))
+		safety_controller_report_error(ERR_FLAG_FLASH_CRC_CODE);
+	any_err |= res;
+
+	/* Perform CRC check over text section */
+	res = flash_crc_calc_section(FLASH_CRC_TEXT, &crc);
+	if (res || crc != flash_crc_get_expected_crc(FLASH_CRC_TEXT))
+		safety_controller_report_error(ERR_FLAG_FLASH_CRC_CODE);
+	any_err |= res;
+
+	/* Perform CRC check over data section */
+	res = flash_crc_calc_section(FLASH_CRC_DATA, &crc);
+	if (res || crc != flash_crc_get_expected_crc(FLASH_CRC_DATA))
+		safety_controller_report_error(ERR_FLAG_FLASH_CRC_DATA);
+	any_err |= res;
+
+	/* Perform CRC check over ccm data section */
+	res = flash_crc_calc_section(FLASH_CRC_CCMDATA, &crc);
+	if (res || crc != flash_crc_get_expected_crc(FLASH_CRC_CCMDATA))
+		safety_controller_report_error(ERR_FLAG_FLASH_CRC_DATA);
+	any_err |= res;
+
+	if (!any_err)
+		ret = 0;
+
+	return ret;
+}
+
+int flash_crc_calc_section(enum flash_crc_section sec, uint32_t *crc_result)
+{
+	uint32_t len;
+	const uint32_t *startptr;
+	const uint32_t *endptr;
+	const uint32_t *load_addr = NULL;
+
+	if (!crc_result)
+		return -1002;
+
+	switch (sec) {
+	case FLASH_CRC_VECTOR:
+		startptr = &__ld_vectors_start;
+		endptr = &__ld_vectors_end;
+		break;
+	case FLASH_CRC_TEXT:
+		startptr = &__ld_text_start;
+		endptr = &__ld_text_end;
+		break;
+	case FLASH_CRC_DATA:
+		startptr = &__ld_sdata;
+		endptr = &__ld_edata;
+		load_addr = &__ld_load_data;
+		break;
+	case FLASH_CRC_CCMDATA:
+		startptr = &__ld_sdata_ccm;
+		endptr = &__ld_edata_ccm;
+		load_addr = &__ld_load_ccm_data;
+		break;
+	default:
+		return -1001;
+	}
+
+	len = (uint32_t)((void *)endptr - (void *)startptr);
+	if (!load_addr)
+		load_addr = startptr;
+
+	/* Not a multiple of 32bit words long. Cannot calculate CRC in this case! */
+	if (len % 4)
+		return -1;
+
+	/* Calculate word count */
+	len /= 4;
+
+	/* Reset CRC and calculate over data range */
+	crc_unit_reset();
+	crc_unit_input_array(load_addr, len);
+	*crc_result = crc_unit_get_crc();
+
+	return 0;
+}
+
+uint32_t flash_crc_get_expected_crc(enum flash_crc_section sec)
+{
+	uint32_t crc;
+
+	switch (sec) {
+	case FLASH_CRC_VECTOR:
+		crc = crcs_in_flash.crc_section_vectors;
+		break;
+	case FLASH_CRC_TEXT:
+		crc = crcs_in_flash.crc_section_text;
+		break;
+	case FLASH_CRC_DATA:
+		crc = crcs_in_flash.crc_section_data;
+		break;
+	case FLASH_CRC_CCMDATA:
+		crc = crcs_in_flash.crc_section_ccm_data;
+		break;
+	default:
+		crc = 0xFFFFFFFFul;
+		break;
+	}
+
+	return crc;
+}

stm-firmware/safety/safety-adc.c

@@ -60,7 +60,8 @@ void safety_adc_init(void)
 	rcc_manager_enable_clock(&RCC->AHB1ENR, BITMASK_TO_BITNO(RCC_AHB1ENR_DMA2EN));
 
 	if (hw_rev != HW_REV_V1_2) {
-		rcc_manager_enable_clock(&RCC->AHB1ENR, BITMASK_TO_BITNO(SAFETY_ADC_SUPPLY_VOLTAGE_MONITOR_PORT_RCC_MASK));
+		rcc_manager_enable_clock(&RCC->AHB1ENR,
+					 BITMASK_TO_BITNO(SAFETY_ADC_SUPPLY_VOLTAGE_MONITOR_PORT_RCC_MASK));
 		SAFETY_ADC_SUPPLY_VOLTAGE_MONITOR_PORT->MODER &= MODER_DELETE(SAFETY_ADC_SUPPLY_VOLTAGE_MONITOR_PIN);
 		SAFETY_ADC_SUPPLY_VOLTAGE_MONITOR_PORT->MODER |= ANALOG(SAFETY_ADC_SUPPLY_VOLTAGE_MONITOR_PIN);
 	}
@@ -97,7 +98,8 @@ void safety_adc_init(void)
 	DMA2_Stream4->PAR = (uint32_t)&SAFETY_ADC_ADC_PERIPHERAL->DR;
 	DMA2_Stream4->M0AR = (uint32_t)safety_adc_conversions;
 	DMA2_Stream4->NDTR = SAFETY_ADC_NUM_OF_CHANNELS;
-	DMA2_Stream4->CR = DMA_SxCR_PL_0 | DMA_SxCR_MSIZE_0 | DMA_SxCR_PSIZE_0 | DMA_SxCR_MINC | DMA_SxCR_CIRC | DMA_SxCR_TCIE | DMA_SxCR_EN;
+	DMA2_Stream4->CR = DMA_SxCR_PL_0 | DMA_SxCR_MSIZE_0 | DMA_SxCR_PSIZE_0 | DMA_SxCR_MINC | DMA_SxCR_CIRC |
+			DMA_SxCR_TCIE | DMA_SxCR_EN;
 	NVIC_EnableIRQ(DMA2_Stream4_IRQn);
 
 	/* Enable ADC */
@@ -175,7 +177,7 @@ void safety_adc_trigger_meas(void)
 	safety_adc_triggered = 1;
 }
 
-void DMA2_Stream4_IRQHandler()
+void DMA2_Stream4_IRQHandler(void)
 {
 	uint32_t hisr;
 

stm-firmware/safety/safety-controller.c

@@ -23,6 +23,7 @@
  * @{
  */
 
+#include "stm32/stm32f407xx.h"
 #include <reflow-controller/safety/safety-controller.h>
 #include <reflow-controller/safety/safety-config.h>
 #include <reflow-controller/safety/watchdog.h>
@@ -43,6 +44,7 @@
 #include <stm-periph/rcc-manager.h>
 #include <reflow-controller/temp-converter.h>
 #include <reflow-controller/adc-meas.h>
+#include <reflow-controller/safety/flash-crc.h>
 #include <reflow-controller/periph-config/safety-adc-hwcfg.h>
 
 /**
@@ -154,15 +156,6 @@ struct overtemp_config {
 	uint32_t crc;
 };
 
-struct flash_crcs {
-	uint32_t start_magic;
-	uint32_t crc_section_text;
-	uint32_t crc_section_data;
-	uint32_t crc_section_ccm_data;
-	uint32_t crc_section_vectors;
-	uint32_t end_magic;
-};
-
 struct crc_monitor_register {
 	const volatile void *reg_addr;
 	uint32_t mask;
@@ -171,9 +164,15 @@ struct crc_monitor_register {
 
 #define CRC_MON_REGISTER_ENTRY(_addr, _mask, _size) {.reg_addr = &(_addr), .mask = (_mask), .size = (_size)}
 
+/**
+ * @brief Sentinel Element for crc monitor register list
+ * 
+ */
+#define CRC_MON_REGISTER_SENTINEL {.reg_addr = NULL, .mask = 0, .size = 0}
+
 struct crc_mon {
 	/**
-	 * @brief Array of registers to monitor. Terminated by NULL sentinel!
+	 * @brief Array of registers to monitor. Terminated by NULL sentinel @ref CRC_MON_REGISTER_SENTINEL
 	 */
 	const struct crc_monitor_register *registers;
 	const enum crc_monitor monitor;
@@ -212,6 +211,7 @@ static volatile struct error_flag IN_SECTION(.ccm.data) flags[] = {
 	ERR_FLAG_ENTRY(ERR_FLAG_FLASH_CRC_DATA),
 	ERR_FLAG_ENTRY(ERR_FLAG_CFG_CRC_MEAS_ADC),
 	ERR_FLAG_ENTRY(ERR_FLAG_CFG_CRC_SAFETY_ADC),
+	ERR_FLAG_ENTRY(ERR_FLAG_CFG_CRC_MISC),
 };
 
 /**
@@ -299,7 +299,7 @@ static const struct crc_monitor_register meas_adc_crc_regs[] = {
 			       ADC_SQR2_SQ8 | ADC_SQR2_SQ7, 4),
 	CRC_MON_REGISTER_ENTRY(ADC_PT1000_PERIPH->SQR3, ADC_SQR3_SQ6 | ADC_SQR3_SQ5 | ADC_SQR3_SQ4 |
 			       ADC_SQR3_SQ3 | ADC_SQR3_SQ2 | ADC_SQR3_SQ1, 4),
-	{NULL, 0, 0}
+	CRC_MON_REGISTER_SENTINEL
 };
 
 static const struct crc_monitor_register safety_adc_crc_regs[] = {
@@ -315,11 +315,27 @@ static const struct crc_monitor_register safety_adc_crc_regs[] = {
 			       ADC_SQR2_SQ8 | ADC_SQR2_SQ7, 4),
 	CRC_MON_REGISTER_ENTRY(SAFETY_ADC_ADC_PERIPHERAL->SQR3, ADC_SQR3_SQ6 | ADC_SQR3_SQ5 | ADC_SQR3_SQ4 |
 			       ADC_SQR3_SQ3 | ADC_SQR3_SQ2 | ADC_SQR3_SQ1, 4),
-	{NULL, 0, 0}
+	CRC_MON_REGISTER_ENTRY(RCC->APB2ENR, SAFETY_ADC_ADC_RCC_MASK, 4),
+	CRC_MON_REGISTER_SENTINEL
 };
 
-static struct crc_mon IN_SECTION(.ccm.data) crc_monitors[] =
-{
+static const struct crc_monitor_register misc_config_crc_regs[] = {
+	/* Check clock tree settings */
+	CRC_MON_REGISTER_ENTRY(RCC->CR, RCC_CR_PLLON | RCC_CR_HSEON | RCC_CR_PLLI2SON | RCC_CR_HSION, 4),
+    CRC_MON_REGISTER_ENTRY(RCC->CSR, RCC_CSR_LSION, 4),
+	CRC_MON_REGISTER_ENTRY(RCC->CFGR, RCC_CFGR_SWS | RCC_CFGR_HPRE | RCC_CFGR_PPRE1 | RCC_CFGR_PPRE2, 4),
+	CRC_MON_REGISTER_ENTRY(RCC->PLLCFGR, RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLQ | RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLP | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLM , 4),
+	/* Check Flash settings */
+	CRC_MON_REGISTER_ENTRY(FLASH->ACR, FLASH_ACR_LATENCY | FLASH_ACR_DCEN | FLASH_ACR_ICEN | FLASH_ACR_PRFTEN, 4),
+	/* Check vector table offset */
+	CRC_MON_REGISTER_ENTRY(SCB->VTOR, 0xFFFFFFFF, 4),
+	/* Check system tick configuration */
+	CRC_MON_REGISTER_ENTRY(SysTick->CTRL, SysTick_CTRL_CLKSOURCE_Msk | SysTick_CTRL_TICKINT_Msk | SysTick_CTRL_ENABLE_Msk, 4),
+	CRC_MON_REGISTER_ENTRY(SysTick->LOAD, 0xFFFFFFFF, 4),
+	CRC_MON_REGISTER_SENTINEL
+};
+
+static struct crc_mon IN_SECTION(.ccm.data) crc_monitors[] = {
 	{
 		.registers = meas_adc_crc_regs,
 		.monitor = ERR_CRC_MON_MEAS_ADC,
@@ -340,6 +356,16 @@ static struct crc_mon IN_SECTION(.ccm.data) crc_monitors[] =
 		.last_crc = 0UL,
 		.active = false,
 	},
+	{
+		.registers = misc_config_crc_regs,
+		.monitor = ERR_CRC_MON_MISC,
+		.pw = SAFETY_CRC_MON_MISC_PW,
+		.flag_to_set = ERR_FLAG_CFG_CRC_MISC,
+		.expected_crc = 0UL,
+		.expected_crc_inv = ~0UL,
+		.last_crc = 0UL,
+		.active = false,
+	}
 };
 
 /**
@@ -360,16 +386,22 @@ static void set_overtemp_config(float over_temperature)
 	safety_controller_overtemp_config.crc_dummy_seed = 0xA4F5C7E6UL;
 	safety_controller_overtemp_config.overtemp_deg_celsius = over_temperature;
 	safety_controller_overtemp_config.overtemp_equiv_resistance = resistance;
-	crc_unit_input_array((const uint32_t *)&safety_controller_overtemp_config, wordsize_of(struct overtemp_config) - 1);
+	crc_unit_input_array((const uint32_t *)&safety_controller_overtemp_config,
+			     wordsize_of(struct overtemp_config) - 1);
 	safety_controller_overtemp_config.crc = crc_unit_get_crc();
 }
 
+/**
+ * @brief Check the overtemperature config structure's CRC
+ * @return true if check failed. false if CRC check successful
+ */
 static bool over_temperature_config_check(void)
 {
 	if (safety_controller_overtemp_config.crc_dummy_seed != 0xA4F5C7E6UL)
 		return true;
 	crc_unit_reset();
-	crc_unit_input_array((const uint32_t *)&safety_controller_overtemp_config, wordsize_of(struct overtemp_config) - 1);
+	crc_unit_input_array((const uint32_t *)&safety_controller_overtemp_config,
+			     wordsize_of(struct overtemp_config) - 1);
 	if (crc_unit_get_crc() != safety_controller_overtemp_config.crc)
 		return true;
 
@@ -519,9 +551,8 @@ static int safety_controller_check_crc_monitors(void)
 
 		if (crc_monitor_calculate_crc(mon->registers, &crc))
 			return -1;
-		if (mon->expected_crc != crc || ~mon->expected_crc_inv != crc) {
+		if (mon->expected_crc != crc || ~mon->expected_crc_inv != crc)
 			safety_controller_report_error(mon->flag_to_set);
-		}
 		mon->last_crc = crc;
 	}
 
@@ -608,16 +639,14 @@ static void apply_config_overrides(void)
 		case SAFETY_MEMORY_CONFIG_OVERRIDE_WEIGHT:
 			flag_enum = flag_no_to_flag_enum(override.entry.weight_override.flag);
 			flag = find_error_flag(flag_enum);
-			if (flag && flag->weight) {
+			if (flag && flag->weight)
 				flag->weight->weight = override.entry.weight_override.weight;
-			}
 			break;
 		case SAFETY_MEMORY_CONFIG_OVERRIDE_PERSISTENCE:
 			flag_enum = flag_no_to_flag_enum(override.entry.persistence_override.flag);
 			flag = find_error_flag(flag_enum);
-			if (flag && flag->persistence) {
+			if (flag && flag->persistence)
 				flag->persistence->persistence = override.entry.persistence_override.persistence;
-			}
 			break;
 		default:
 			continue;
@@ -647,12 +676,11 @@ static bool error_flag_get_status(const volatile struct error_flag *flag)
 	if (!flag)
 		return true;
 
-	if (flag->error_state == flag->error_state_inv) {
+	if (flag->error_state == flag->error_state_inv)
 		return true;
-	} else {
+	else
 		return flag->error_state;
 }
-}
 
 /**
  * @brief Find a analog value monitor structure by its enum number
@@ -693,7 +721,7 @@ static volatile struct timing_mon *find_timing_mon(enum timing_monitor mon)
 /**
  * @brief Check the active timing monitors and set the appropriate flags in case of an error.
  */
-static void safety_controller_process_active_timing_mons()
+static void safety_controller_process_active_timing_mons(void)
 {
 	uint32_t i;
 	volatile struct timing_mon *current_mon;
@@ -716,7 +744,8 @@ static void safety_controller_process_active_timing_mons()
  * Process the analog and timing monitors and set the relevant flags in case of a monitor outside its limits.
  * Furthermore, the PT1000 resistance is checked for overtemperature
  *
- * The checking of the analog monitors will only be armed after a startup delay of 1000 ms to allow the values to stabilize.
+ * The checking of the analog monitors will only be armed after a startup delay of 1000 ms to
+ * allow the values to stabilize.
  */
 static void safety_controller_process_monitor_checks(void)
 {
@@ -731,21 +760,18 @@ static void safety_controller_process_monitor_checks(void)
 
 	if (startup_completed) {
 		analog_mon_count = safety_controller_get_analog_monitor_count();
-		for (idx = 0; idx < analog_mon_count; idx++) {
+		for (idx = 0; idx < analog_mon_count; idx++)
 			if (safety_controller_get_analog_mon_by_index(idx, &amon_info)) {
 				panic_mode();
-			}
 
-			if (amon_info.status != ANALOG_MONITOR_OK) {
+			if (amon_info.status != ANALOG_MONITOR_OK)
 				safety_controller_report_error(amon_info.associated_flag);
 		}
 	}
-	}
 
 	adc_pt1000_get_current_resistance(&pt1000_val);
-	if (pt1000_val > safety_controller_overtemp_config.overtemp_equiv_resistance) {
+	if (pt1000_val > safety_controller_overtemp_config.overtemp_equiv_resistance)
 		safety_controller_report_error(ERR_FLAG_OVERTEMP);
-	}
 
 	(void)safety_controller_check_crc_monitors();
 
@@ -820,10 +846,9 @@ void safety_controller_report_timing(enum timing_monitor monitor)
 	tim = find_timing_mon(monitor);
 	if (tim) {
 		if (tim->enabled) {
-			if (!systick_ticks_have_passed(tim->last, tim->min_delta) && tim->min_delta > 0U) {
+			if (!systick_ticks_have_passed(tim->last, tim->min_delta) && tim->min_delta > 0U)
 				safety_controller_report_error(tim->associated_flag);
 		}
-		}
 
 		tim->calculated_delta = timestamp - tim->last;
 		tim->last = timestamp;
@@ -870,10 +895,9 @@ static int get_safety_flags_from_error_mem(enum safety_flag *flags)
 
 	for (idx = 0; idx < count; idx++) {
 		res = safety_memory_get_error_entry(idx, &entry);
-		if (entry.type == SAFETY_MEMORY_ERR_ENTRY_FLAG) {
+		if (entry.type == SAFETY_MEMORY_ERR_ENTRY_FLAG)
 			return_flags |= flag_no_to_flag_enum(entry.flag_num);
 	}
-	}
 
 	*flags = return_flags;
 	return 0;
@@ -884,11 +908,12 @@ static int get_safety_flags_from_error_mem(enum safety_flag *flags)
  *
  * The external harware watchdog has to be periodically reset or it will reset hte controller.
  * Because debugging is not possible, when the watchdog is active, it is only activated, if the application is
- * compiled in release mode. Any interruption of the main programm will then trigger the internal and/or the external watchdog.
+ * compiled in release mode. Any interruption of the main programm will then trigger the internal and/or
+ * the external watchdog.
  *
  * @note When enabled, execute the @ref external_watchdog_toggle function to reset the external watchdog.
  */
-static void safety_controller_init_external_watchdog()
+static void safety_controller_init_external_watchdog(void)
 {
 	rcc_manager_enable_clock(&RCC->AHB1ENR, BITMASK_TO_BITNO(SAFETY_EXT_WATCHDOG_RCC_MASK));
 	SAFETY_EXT_WATCHDOG_PORT->MODER &= MODER_DELETE(SAFETY_EXT_WATCHDOG_PIN);
@@ -899,7 +924,7 @@ static void safety_controller_init_external_watchdog()
 	__DSB();
 }
 
-void safety_controller_init()
+void safety_controller_init(void)
 {
 	enum safety_memory_state found_memory_state;
 	enum safety_flag flags_in_err_mem = ERR_FLAG_NO_FLAG;
@@ -916,7 +941,7 @@ void safety_controller_init()
 	/* This is usually done by the safety memory already. But, since this module also uses the CRC... */
 	crc_unit_init();
 
-	safety_controller_trigger_flash_crc_check();
+	flash_crc_trigger_check();
 	stack_check_init_corruption_detect_area();
 
 	hw_rev = get_pcb_hardware_version();
@@ -948,7 +973,7 @@ void safety_controller_init()
 						MEAS_ADC_SAFETY_FLAG_KEY);
 
 	safety_adc_init();
-	watchdog_setup(WATCHDOG_PRESCALER);
+	(void)watchdog_setup(WATCHDOG_PRESCALER, WATCHDOG_RELOAD_VALUE);
 
 	if (rcc_manager_get_reset_cause(false) & RCC_RESET_SOURCE_IWDG)
 		safety_controller_report_error(ERR_FLAG_WTCHDG_FIRED);
@@ -967,7 +992,7 @@ void safety_controller_init()
  * 1) Checking the remaining free space at the moment between stack pointer and top of heap.
  * 2) Checking The CRC of the corruption detect area between heap and stack
  */
-static void safety_controller_check_stack()
+static void safety_controller_check_stack(void)
 {
 	int32_t free_stack;
 
@@ -975,18 +1000,17 @@ static void safety_controller_check_stack()
 	if (free_stack < SAFETY_MIN_STACK_FREE)
 		safety_controller_report_error(ERR_FLAG_STACK);
 
-	if (stack_check_corruption_detect_area()) {
+	if (stack_check_corruption_detect_area())
 		safety_controller_report_error(ERR_FLAG_STACK);
 }
-}
 
 /**
  * @brief Handle the Safety ADC
  *
  * This function handles the safety ADC.
- * If the safety ADC ius not executing a measurment and the time since the last measurement has
- * passed @ref SAFETY_CONTROLLER_ADC_DELAY_MS, the safety ADC is retriggered and will automatically perform a measurement
- * on all of its channels.
+ * If the safety ADC is not executing a measurment and the time since the last measurement has
+ * passed @ref SAFETY_CONTROLLER_ADC_DELAY_MS, the safety ADC is retriggered and will automatically perform a
+ * measurement on all of its channels.
  * When called again, this function will retrieve the data from the safety ADC and  converts it into the
  * appropriate analog values for the analog value monitors.
  *
@@ -995,7 +1019,7 @@ static void safety_controller_check_stack()
  *
  * The channels, the ssafety ADC will convert is defined in its header file using the define @ref SAFETY_ADC_CHANNELS.
  */
-static void safety_controller_handle_safety_adc()
+static void safety_controller_handle_safety_adc(void)
 {
 	static uint64_t last_result_timestamp = 0;
 	const uint16_t *channels;
@@ -1066,10 +1090,9 @@ static void safety_controller_handle_memory_checks(void)
 		/* Check the safety memory */
 		if (safety_memory_check()) {
 			(void)safety_memory_reinit(&found_state);
-			if (found_state != SAFETY_MEMORY_INIT_VALID_MEMORY) {
+			if (found_state != SAFETY_MEMORY_INIT_VALID_MEMORY)
 				safety_controller_report_error(ERR_FLAG_SAFETY_MEM_CORRUPT);
 		}
-		}
 
 		/* If flag weight table is broken, reinit to default and set flag */
 		if (flag_weight_table_crc_check()) {
@@ -1097,7 +1120,7 @@ static void safety_controller_handle_memory_checks(void)
  * If the systick stays constant for more than 1000 calls of this function,
  * the @ref ERR_FLAG_SYSTICK flag is set.
  */
-static void safety_controller_do_systick_checking()
+static void safety_controller_do_systick_checking(void)
 {
 	static uint64_t last_systick;
 	static uint32_t same_systick_cnt = 0UL;
@@ -1121,22 +1144,29 @@ static void safety_controller_do_systick_checking()
  * is set, the appropriate action defined by the flag weight is executed.
  * @note If no flag weigth is present for a given error flag, it is treated as the most critical category
  * (@ref SAFETY_FLAG_CONFIG_WEIGHT_PANIC)
+ *
+ * @returns Worst config weight set
  */
-static void safety_controller_handle_weighted_flags()
+static enum config_weight safety_controller_handle_weighted_flags(void)
 {
 	uint32_t flag_index;
 	volatile struct error_flag *current_flag;
 	enum config_weight flag_weigth;
+	enum config_weight worst = SAFETY_FLAG_CONFIG_WEIGHT_NONE;
 
 	for (flag_index = 0u; flag_index < COUNT_OF(flags); flag_index++) {
 		current_flag = &flags[flag_index];
 
 		/* Continue if this flag is not set */
-		if (!error_flag_get_status(current_flag)) {
+		if (!error_flag_get_status(current_flag))
 			continue;
-		}
 
 		flag_weigth = get_flag_weight(current_flag);
+
+		/* Override the worst flag weigt set, if it is worse than the previous ones */
+		if (flag_weigth > worst)
+			worst = flag_weigth;
+
 		switch (flag_weigth) {
 		case SAFETY_FLAG_CONFIG_WEIGHT_NONE:
 			break;
@@ -1152,18 +1182,20 @@ static void safety_controller_handle_weighted_flags()
 		}
 
 	}
+
+	return worst;
 }
 
 #ifndef DEBUGBUILD
-static void external_watchdog_toggle()
+static void external_watchdog_toggle(void)
 {
 	SAFETY_EXT_WATCHDOG_PORT->ODR ^= (1<<SAFETY_EXT_WATCHDOG_PIN);
 }
 #endif
 
-int safety_controller_handle()
+enum config_weight safety_controller_handle(void)
 {
-	int ret = 0;
+	enum config_weight worst_weight_set;
 #ifndef DEBUGBUILD
 	static uint32_t watchdog_counter = 0UL;
 #endif
@@ -1173,9 +1205,10 @@ int safety_controller_handle()
 	safety_controller_handle_memory_checks();
 	safety_controller_do_systick_checking();
 	safety_controller_process_monitor_checks();
-	safety_controller_handle_weighted_flags();
+	worst_weight_set = safety_controller_handle_weighted_flags();
 
-	ret |= watchdog_ack(WATCHDOG_MAGIC_KEY);
+	/* Ignore error here. Will trigger restart anyway */
+	(void)watchdog_ack(WATCHDOG_MAGIC_KEY);
 
 #ifndef DEBUGBUILD
 	if (get_pcb_hardware_version() != HW_REV_V1_2) {
@@ -1186,7 +1219,8 @@ int safety_controller_handle()
 		}
 	}
 #endif
-	return (ret ? -1 : 0);
+
+	return worst_weight_set;
 }
 
 int safety_controller_enable_timing_mon(enum timing_monitor monitor, bool enable)
@@ -1273,9 +1307,8 @@ int safety_controller_ack_flag_with_key(enum safety_flag flag, uint32_t key)
 	int ret = -1;
 	volatile struct error_flag *found_flag;
 
-	if (!is_power_of_two(flag)) {
+	if (!is_power_of_two(flag))
 		return -1001;
-	}
 
 	found_flag = find_error_flag(flag);
 	if (found_flag) {
@@ -1306,17 +1339,17 @@ bool safety_controller_get_flags_by_mask(enum safety_flag mask)
 	return ret;
 }
 
-uint32_t safety_controller_get_flag_count()
+uint32_t safety_controller_get_flag_count(void)
 {
 	return COUNT_OF(flags);
 }
 
-uint32_t safety_controller_get_analog_monitor_count()
+uint32_t safety_controller_get_analog_monitor_count(void)
 {
 	return COUNT_OF(analog_mons);
 }
 
-uint32_t safety_controller_get_timing_monitor_count()
+uint32_t safety_controller_get_timing_monitor_count(void)
 {
 	return COUNT_OF(timings);
 }
@@ -1423,9 +1456,8 @@ int safety_controller_get_timing_mon_by_index(uint32_t index, struct timing_moni
 	if (!info)
 		return -1002;
 
-	if (index >= COUNT_OF(timings)) {
+	if (index >= COUNT_OF(timings))
 		return -1001;
-	}
 
 	mon = &timings[index];
 
@@ -1449,99 +1481,6 @@ float safety_controller_get_overtemp_limit(void)
 	return safety_controller_overtemp_config.overtemp_deg_celsius;
 }
 
-extern const uint32_t __ld_vectors_start;
-extern const uint32_t __ld_vectors_end;
-extern const uint32_t __ld_text_start;
-extern const uint32_t __ld_text_end;
-
-extern const uint32_t __ld_sdata_ccm;
-extern const uint32_t __ld_edata_ccm;
-extern const uint32_t __ld_load_ccm_data;
-
-extern const uint32_t __ld_sdata;
-extern const uint32_t __ld_edata;
-extern const uint32_t __ld_load_data;
-
-int safety_controller_trigger_flash_crc_check()
-{
-	/* This structs needs to be volatile!!
-	 * This prevents the compiler form optimizing out the reads to the crcs which will be patched in later by
-	 * a separate python script!
-	 */
-	static volatile const struct flash_crcs IN_SECTION(.flashcrc) crcs_in_flash =
-	{
-		.start_magic = 0xA8BE53F9UL,
-		.crc_section_ccm_data = 0UL,
-		.crc_section_text = 0UL,
-		.crc_section_data = 0UL,
-		.crc_section_vectors = 0UL,
-		.end_magic = 0xFFA582FFUL,
-	};
-
-	int ret = -1;
-	uint32_t len;
-	uint32_t crc;
-
-	/* Perform CRC check over vector table */
-	len = (uint32_t)((void *)&__ld_vectors_end - (void *)&__ld_vectors_start);
-	if (len % 4) {
-		safety_controller_report_error(ERR_FLAG_FLASH_CRC_CODE);
-	} else {
-		len /= 4;
-		crc_unit_reset();
-		crc_unit_input_array(&__ld_vectors_start, len);
-		crc = crc_unit_get_crc();
-		if (crc != crcs_in_flash.crc_section_vectors) {
-			safety_controller_report_error(ERR_FLAG_FLASH_CRC_CODE);
-		}
-	}
-
-	/* Perform CRC check over text section */
-	len = (uint32_t)((void *)&__ld_text_end - (void *)&__ld_text_start);
-	if (len % 4) {
-		safety_controller_report_error(ERR_FLAG_FLASH_CRC_CODE);
-	} else {
-		len /= 4;
-		crc_unit_reset();
-		crc_unit_input_array(&__ld_text_start, len);
-		crc = crc_unit_get_crc();
-		if (crc != crcs_in_flash.crc_section_text) {
-			safety_controller_report_error(ERR_FLAG_FLASH_CRC_CODE);
-		}
-	}
-
-	/* Perform CRC check over data section */
-	len = (uint32_t)((void *)&__ld_edata - (void *)&__ld_sdata);
-	if (len % 4) {
-		safety_controller_report_error(ERR_FLAG_FLASH_CRC_DATA);
-	} else {
-		len /= 4;
-		crc_unit_reset();
-		crc_unit_input_array(&__ld_load_data, len);
-		crc = crc_unit_get_crc();
-		if (crc != crcs_in_flash.crc_section_data) {
-			safety_controller_report_error(ERR_FLAG_FLASH_CRC_DATA);
-		}
-	}
-
-	/* Perform CRC check over ccm data section */
-	len = (uint32_t)((void *)&__ld_edata_ccm - (void *)&__ld_sdata_ccm);
-	if (len % 4) {
-		safety_controller_report_error(ERR_FLAG_FLASH_CRC_DATA);
-	} else {
-		len /= 4;
-		crc_unit_reset();
-		crc_unit_input_array(&__ld_load_ccm_data, len);
-		crc = crc_unit_get_crc();
-		if (crc != crcs_in_flash.crc_section_ccm_data) {
-			safety_controller_report_error(ERR_FLAG_FLASH_CRC_DATA);
-		}
-	}
-
-	ret = 0;
-	return ret;
-}
-
 int safety_controller_set_crc_monitor(enum crc_monitor mon, uint32_t password)
 {
 	uint32_t i;

stm-firmware/safety/safety-memory.c

@@ -99,7 +99,8 @@ static enum safety_memory_state safety_memory_get_header(struct safety_memory_he
 	res = 0;
 	if (header->boot_status_offset < wordsize_of(struct safety_memory_header))
 		res++;
-	if (header->config_overrides_offset < header->boot_status_offset + wordsize_of(struct safety_memory_boot_status))
+	if (header->config_overrides_offset < header->boot_status_offset +
+			wordsize_of(struct safety_memory_boot_status))
 		res++;
 	if (header->config_overrides_len > SAFETY_MEMORY_CONFIG_OVERRIDE_COUNT)
 		res++;
@@ -107,7 +108,8 @@ static enum safety_memory_state safety_memory_get_header(struct safety_memory_he
 		res++;
 	if (header->err_memory_offset < header->firmware_update_filename + (SAFETY_MEMORY_UPDATE_FILENAME_MAXSIZE / 4))
 		res++;
-	if (header->err_memory_end >= backup_ram_get_size_in_words() || header->err_memory_end < header->err_memory_offset)
+	if (header->err_memory_end >= backup_ram_get_size_in_words() ||
+			header->err_memory_end < header->err_memory_offset)
 		res++;
 
 	if (res) {
@@ -148,7 +150,7 @@ static void safety_memory_write_new_header(void)
 	safety_memory_write_and_patch_header(&header);
 }
 
-static int safety_memory_check_crc()
+static int safety_memory_check_crc(void)
 {
 	struct safety_memory_header header;
 	enum safety_memory_state state = safety_memory_get_header(&header);
@@ -181,7 +183,7 @@ static int safety_memory_check_crc()
 		return 0;
 }
 
-static int safety_memory_gen_crc()
+static int safety_memory_gen_crc(void)
 {
 	struct safety_memory_header header;
 	uint32_t word_addr;
@@ -268,9 +270,8 @@ int safety_memory_get_boot_status(struct safety_memory_boot_status *status)
 	if (!status)
 		return -1001;
 
-	if (safety_memory_get_header(&header) != SAFETY_MEMORY_INIT_VALID_MEMORY) {
+	if (safety_memory_get_header(&header) != SAFETY_MEMORY_INIT_VALID_MEMORY)
 		return -2000;
-	}
 
 	if (safety_memory_check_crc())
 		return -2001;
@@ -289,9 +290,8 @@ int safety_memory_set_boot_status(const struct safety_memory_boot_status *status
 	if (!status)
 		return -1001;
 
-	if (safety_memory_get_header(&header) != SAFETY_MEMORY_INIT_VALID_MEMORY) {
+	if (safety_memory_get_header(&header) != SAFETY_MEMORY_INIT_VALID_MEMORY)
 		return -2000;
-	}
 
 	if (safety_memory_check_crc())
 		return -2001;
@@ -304,7 +304,7 @@ int safety_memory_set_boot_status(const struct safety_memory_boot_status *status
 	return 0;
 }
 
-static int safety_memory_check_error_entries()
+static int safety_memory_check_error_entries(void)
 {
 	struct safety_memory_header header;
 	uint32_t addr;
@@ -312,9 +312,8 @@ static int safety_memory_check_error_entries()
 	int ret = 0;
 	int res;
 
-	if (safety_memory_get_header(&header) != SAFETY_MEMORY_INIT_VALID_MEMORY) {
+	if (safety_memory_get_header(&header) != SAFETY_MEMORY_INIT_VALID_MEMORY)
 		return -2000;
-	}
 
 	for (addr = header.err_memory_offset; addr < header.err_memory_end; addr++) {
 		res = backup_ram_get_data(addr, &data, 1UL);
@@ -340,9 +339,8 @@ int safety_memory_get_error_entry_count(uint32_t *count)
 	if (!count)
 		return -1001;
 
-	if (safety_memory_get_header(&header) != SAFETY_MEMORY_INIT_VALID_MEMORY) {
+	if (safety_memory_get_header(&header) != SAFETY_MEMORY_INIT_VALID_MEMORY)
 		return -2000;
-	}
 
 	*count = header.err_memory_end - header.err_memory_offset;
 
@@ -354,9 +352,8 @@ int safety_memory_check(void)
 	int res;
 
 	res = safety_memory_check_crc();
-	if (!res) {
+	if (!res)
 		res |= safety_memory_check_error_entries();
-	}
 
 	return -!!res;
 }
@@ -372,9 +369,8 @@ int safety_memory_get_error_entry(uint32_t idx, struct error_memory_entry *entry
 	if (!entry)
 		return -1001;
 
-	if (safety_memory_get_header(&header) != SAFETY_MEMORY_INIT_VALID_MEMORY) {
+	if (safety_memory_get_header(&header) != SAFETY_MEMORY_INIT_VALID_MEMORY)
 		return -2000;
-	}
 
 	err_mem_count = header.err_memory_end - header.err_memory_offset;
 	if (idx < err_mem_count && err_mem_count > 0) {
@@ -410,9 +406,8 @@ int safety_memory_insert_error_entry(struct error_memory_entry *entry)
 
 	input_data = error_memory_entry_to_word(entry);
 
-	if (safety_memory_get_header(&header) != SAFETY_MEMORY_INIT_VALID_MEMORY) {
+	if (safety_memory_get_header(&header) != SAFETY_MEMORY_INIT_VALID_MEMORY)
 		return -2000;
-	}
 
 	if (entry->type == SAFETY_MEMORY_ERR_ENTRY_NOP) {
 		/* Append to end */
@@ -510,9 +505,8 @@ int safety_memory_insert_config_override(struct config_override *config_override
 	int res;
 	int ret = -3;
 
-	if (safety_memory_get_header(&header) != SAFETY_MEMORY_INIT_VALID_MEMORY) {
+	if (safety_memory_get_header(&header) != SAFETY_MEMORY_INIT_VALID_MEMORY)
 		return -2000;
-	}
 
 	if (header.config_overrides_len == 0)
 		return -1;
@@ -550,9 +544,8 @@ int safety_memory_get_config_override_count(uint32_t *count)
 
 	*count = 0UL;
 
-	if (safety_memory_get_header(&header) != SAFETY_MEMORY_INIT_VALID_MEMORY) {
+	if (safety_memory_get_header(&header) != SAFETY_MEMORY_INIT_VALID_MEMORY)
 		return -2000;
-	}
 
 	if (header.config_overrides_len == 0)
 		return 0;
@@ -582,18 +575,15 @@ int safety_memory_get_config_override(uint32_t idx, struct config_override *conf
 	if (!config_override)
 		return -1002;
 
-	if (safety_memory_get_header(&header) != SAFETY_MEMORY_INIT_VALID_MEMORY) {
+	if (safety_memory_get_header(&header) != SAFETY_MEMORY_INIT_VALID_MEMORY)
 		return -2000;
-	}
 
-	if (idx >= header.config_overrides_len) {
+	if (idx >= header.config_overrides_len)
 		return -1001;
-	}
 
 	res = backup_ram_get_data(header.config_overrides_offset + idx, &data, 1UL);
-	if (res) {
+	if (res)
 		return -1;
-	}
 
 	switch (data & 0xFF) {
 	case 0xA2:
@@ -649,8 +639,8 @@ int safety_memory_get_update_filename(char *filename, size_t *outlen)
 {
 	struct safety_memory_header header;
 	unsigned int i;
-	volatile char *ptr;
 	size_t len = 0u;
+	volatile char *ptr;
 
 	/* If filename and outlen are both NULL, we don't do anything */
 	if (!filename && !outlen)
@@ -696,9 +686,9 @@ int safety_memory_set_update_filename(const char *filename)
 	ram_ptr = backup_ram_get_base_ptr();
 	ram_ptr += header.firmware_update_filename * 4;
 
-	for (i = 0u; i < len; i++) {
+	for (i = 0u; i < len; i++)
 		ram_ptr[i] = filename[i];
-	}
+
 	ram_ptr[i] = 0;
 
 	ret = safety_memory_gen_crc();

stm-firmware/safety/stack-check.c

@@ -26,7 +26,7 @@
 extern char __ld_top_of_stack;
 extern char __ld_end_stack;
 
-int32_t stack_check_get_usage()
+int32_t stack_check_get_usage(void)
 {
 	uint32_t stack_top;
 	uint32_t stack_ptr;
@@ -37,7 +37,7 @@ int32_t stack_check_get_usage()
 	return stack_top - stack_ptr;
 }
 
-int32_t stack_check_get_free()
+int32_t stack_check_get_free(void)
 {
 	uint32_t upper_heap_boundary;
 	uint32_t stack_ptr;
@@ -102,9 +102,6 @@ int stack_check_corruption_detect_area(void)
 						&__ld_start_stack_corruption_detect_area;
 	crc_unit_reset();
 	crc_unit_input_array(&__ld_start_stack_corruption_detect_area, area_size_in_words);
-	if (crc_unit_get_crc() == 0UL) {
-		return 0;
-	} else {
-		return -1;
-	}
+
+	return crc_unit_get_crc() == 0UL ? 0 : -1;
 }

stm-firmware/safety/watchdog.c

@@ -42,52 +42,63 @@
  */
 #define STM32_WATCHDOG_REGISTER_ACCESS_KEY 0x5555
 
-int watchdog_setup(uint8_t prescaler)
+int watchdog_setup(uint16_t prescaler, uint16_t reload_value)
 {
 	uint32_t prescaler_reg_val;
+	int ret = 0;
 
 	/** - Activate the LSI oscillator */
 	RCC->CSR |= RCC_CSR_LSION;
 	__DSB();
 	/** - Wait for the oscillator to be ready */
-	while (!(RCC->CSR & RCC_CSR_LSIRDY));
+	while (!(RCC->CSR & RCC_CSR_LSIRDY))
+		;
 
-	if (prescaler == 4U)
+	if (prescaler == 4U) {
 		prescaler_reg_val = 0UL;
-	else if (prescaler == 8U)
+	} else if (prescaler == 8U) {
 		prescaler_reg_val = 1UL;
-	else if (prescaler == 16U)
+	} else if (prescaler == 16U) {
 		prescaler_reg_val = 2UL;
-	else if (prescaler == 32U)
+	} else if (prescaler == 32U) {
 		prescaler_reg_val = 3UL;
-	else if (prescaler == 64U)
+	} else if (prescaler == 64U) {
 		prescaler_reg_val = 4UL;
-	else if (prescaler == 128U)
+	} else if (prescaler == 128U) {
 		prescaler_reg_val = 5UL;
-	else
+	} else if (prescaler == 256U) {
 		prescaler_reg_val = 6UL;
+	} else {
+		prescaler_reg_val = 6UL;
+		ret = -1;
+	}
 
 	/** - (De)activate the watchdog during debug access according to @ref WATCHDOG_HALT_DEBUG */
-	if (WATCHDOG_HALT_DEBUG) {
+	if (WATCHDOG_HALT_DEBUG)
 		DBGMCU->APB1FZ |= DBGMCU_APB1_FZ_DBG_IWDG_STOP;
-	} else {
+	else
 		DBGMCU->APB1FZ &= ~DBGMCU_APB1_FZ_DBG_IWDG_STOP;
-	}
 
 	/** - Unlock registers */
 	IWDG->KR = STM32_WATCHDOG_REGISTER_ACCESS_KEY;
 
 	/** - Wait until prescaler can be written */
-	while (IWDG->SR & IWDG_SR_PVU);
+	while (IWDG->SR & IWDG_SR_PVU)
+		;
 
 	/** - Write prescaler value */
 	IWDG->PR = prescaler_reg_val;
 
 	/* - Wait until reload value can be written */
-	while (IWDG->SR & IWDG_SR_RVU);
+	while (IWDG->SR & IWDG_SR_RVU)
+		;
 
-	/** - Set reload value fixed to 0xFFF */
-	IWDG->RLR = 0xFFFU;
+	/** - Set reload value */
+	if (reload_value > 0xFFFu) {
+		reload_value = 0xFFFFu;
+		ret = -2;
+	}
+	IWDG->RLR = reload_value;
 
 	/** - Write enable key */
 	IWDG->KR = STM32_WATCHDOG_ENABLE_KEY;
@@ -95,7 +106,7 @@ int watchdog_setup(uint8_t prescaler)
 	/** - Do a first reset of the counter. This also locks the config regs */
 	watchdog_ack(WATCHDOG_MAGIC_KEY);
 
-	return 0;
+	return ret;
 }
 
 int watchdog_ack(uint32_t magic)

stm-firmware/sd.c

@@ -0,0 +1,65 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2022  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * GDSII-Converter is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <reflow-controller/sd.h>
+#include "fatfs/ff.h"
+#include "fatfs/shimatta_sdio_driver/shimatta_sdio.h"
+#include <stdint.h>
+#include <string.h>
+#include <helper-macros/helper-macros.h>
+#include <reflow-controller/digio.h>
+
+static bool sd_card_mounted_state = false;
+
+bool mount_sd_card_if_avail(FATFS *fs)
+{
+	FRESULT res;
+	static uint8_t IN_SECTION(.ccm.bss) inserted_counter = 0;
+
+	if (sdio_check_inserted() && sd_card_mounted_state) {
+		memset(fs, 0, sizeof(FATFS));
+		sdio_stop_clk();
+		inserted_counter = 0;
+		sd_card_mounted_state = false;
+		goto ret;
+	}
+
+	if (!sdio_check_inserted() && inserted_counter < 255)
+		inserted_counter++;
+
+	if (!sdio_check_inserted() && !sd_card_mounted_state && inserted_counter > 4) {
+		inserted_counter = 0;
+		res = f_mount(fs, "0:/", 1);
+		if (res == FR_OK) {
+			led_set(1, 1);
+			sd_card_mounted_state = true;
+		} else {
+			sd_card_mounted_state = false;
+		}
+	}
+
+ret:
+	return sd_card_mounted_state;
+}
+
+bool sd_card_is_mounted(void)
+{
+	return sd_card_mounted_state;
+}

stm-firmware/settings/settings-eeprom.c

@@ -37,6 +37,7 @@ struct eeprom_calibration_settings {
 };
 
 #define EEPROM_OVER_TEMP_CONFIG_BASE_ADDR (EEPROM_CALIBRATION_BASE_ADDR + sizeof(struct eeprom_calibration_settings))
+
 struct eeprom_over_temp_config {
 	float over_temperature;
 	uint32_t over_temp_crc;
@@ -54,7 +55,7 @@ static bool check_eeprom_header(void)
 		return true;
 }
 
-static void settings_eeprom_zero()
+static void settings_eeprom_zero(void)
 {
 	settings_eeprom_save_calibration(0.0f, 0.0f, false);
 	settings_eeprom_save_overtemp_limit(0.0f, false);
@@ -62,7 +63,7 @@ static void settings_eeprom_zero()
 
 bool settings_eeprom_detect_and_prepare(void)
 {
-	bool eeprom_ready = false;;
+	bool eeprom_ready = false;
 
 	int res;
 
@@ -77,7 +78,10 @@ bool settings_eeprom_detect_and_prepare(void)
 	if (check_eeprom_header() == false) {
 		/* Try to write a new header and check it again */
 		spi_eeprom_write(0, expected_header, sizeof(expected_header));
-		while (spi_eeprom_write_in_progress());
+
+		while (spi_eeprom_write_in_progress())
+			;
+
 		if (check_eeprom_header() == false) {
 			goto ret_deinit_crc;
 		} else {

stm-firmware/settings/settings-sd-card.c

@@ -72,18 +72,12 @@ static int create_controller_folder(void)
 		ret = 0;
 	} else {
 		filesystem_result = f_mkdir(foldername);
-		if (filesystem_result == FR_OK) {
-			ret = 1;
-		} else {
-			ret = -1;
-		}
+		ret = filesystem_result == FR_OK ? 1 : -1;
 	}
 
 	return ret;
 }
 
-
-
 int sd_card_settings_save_calibration(float sens_deviation, float offset, bool active)
 {
 	char path[200];

stm-firmware/settings/spi-eeprom.c

@@ -52,7 +52,7 @@ static void eeprom_cs_deactivate(void)
 	SPI_EEPROM_SPI_PORT->ODR |= (1<<SPI_EEPROM_CS_PIN);
 }
 
-int spi_eeprom_init()
+int spi_eeprom_init(void)
 {
 	static struct stm_spi_dev spi_dev;
 	struct stm_spi_settings settings;
@@ -61,7 +61,8 @@ int spi_eeprom_init()
 
 	SPI_EEPROM_SPI_PORT->MODER &= MODER_DELETE(SPI_EEPROM_CS_PIN) & MODER_DELETE(SPI_EEPROM_MISO_PIN) &
 			MODER_DELETE(SPI_EEPROM_MOSI_PIN) & MODER_DELETE(SPI_EEPROM_SCK_PIN);
-	SPI_EEPROM_SPI_PORT->MODER |= ALTFUNC(SPI_EEPROM_MISO_PIN) | ALTFUNC(SPI_EEPROM_SCK_PIN) | ALTFUNC(SPI_EEPROM_MOSI_PIN);
+	SPI_EEPROM_SPI_PORT->MODER |= ALTFUNC(SPI_EEPROM_MISO_PIN) | ALTFUNC(SPI_EEPROM_SCK_PIN) |
+			ALTFUNC(SPI_EEPROM_MOSI_PIN);
 	SPI_EEPROM_SPI_PORT->MODER |= OUTPUT(SPI_EEPROM_CS_PIN);
 
 	SETAF(SPI_EEPROM_SPI_PORT, SPI_EEPROM_MISO_PIN, SPI_EEPROM_SPI_ALTFUNC_NO);
@@ -85,7 +86,7 @@ int spi_eeprom_init()
 		return -1;
 }
 
-void spi_eeprom_deinit()
+void spi_eeprom_deinit(void)
 {
 	spi_deinit(eeprom_spi_handle);
 
@@ -166,7 +167,8 @@ static void spi_eeprom_do_write_page(uint32_t addr, const uint8_t *data, uint8_t
 	uint8_t cmd[2];
 
 	/* Wait for the previous write to finish */
-	while (spi_eeprom_write_in_progress());
+	while (spi_eeprom_write_in_progress())
+		;
 	/* Set the write enable latch */
 	spi_eeprom_set_write_enable_latch(true);
 

stm-firmware/stm-periph/backup-ram.c

@@ -46,7 +46,8 @@ void backup_ram_init(bool use_backup_regulator)
 		PWR->CSR |= PWR_CSR_BRE;
 
 		/* Wait until regulator is ready */
-		while (!(PWR->CSR & PWR_CSR_BRR));
+		while (!(PWR->CSR & PWR_CSR_BRR))
+			;
 	}
 
 	/* Enable clock for backup ram interface */

stm-firmware/stm-periph/dma-ring-buffer.c

@@ -37,11 +37,10 @@ static size_t calculate_ring_buffer_fill_level(size_t buffer_size, size_t get_id
 {
 	size_t fill_level;
 
-	if (put_idx >= get_idx) {
+	if (put_idx >= get_idx)
 		fill_level = (put_idx - get_idx);
-	} else {
+	else
 		fill_level = buffer_size - get_idx + put_idx;
-	}
 
 	return fill_level;
 }
@@ -49,7 +48,7 @@ static size_t calculate_ring_buffer_fill_level(size_t buffer_size, size_t get_id
 static int dma_ring_buffer_switch_clock_enable(uint8_t base_dma, bool clk_en)
 {
 	int ret_val;
-	int (*clk_func)(volatile uint32_t *, uint8_t);
+	int (*clk_func)(volatile uint32_t *reg, uint8_t bit_no);
 
 	if (clk_en)
 		clk_func = rcc_manager_enable_clock;
@@ -72,8 +71,9 @@ static int dma_ring_buffer_switch_clock_enable(uint8_t base_dma, bool clk_en)
 }
 
 int dma_ring_buffer_periph_to_mem_initialize(struct dma_ring_buffer_to_mem *dma_buffer, uint8_t base_dma_id,
-					     DMA_Stream_TypeDef *dma_stream, size_t buffer_element_count, size_t element_size,
-					     volatile void *data_buffer, void* src_reg, uint8_t dma_trigger_channel)
+					     DMA_Stream_TypeDef *dma_stream, size_t buffer_element_count,
+					     size_t element_size, volatile void *data_buffer,
+					     void *src_reg, uint8_t dma_trigger_channel)
 {
 	int ret_val = 0;
 
@@ -106,7 +106,8 @@ int dma_ring_buffer_periph_to_mem_initialize(struct dma_ring_buffer_to_mem *dma_
 	return 0;
 }
 
-int dma_ring_buffer_periph_to_mem_get_data(struct dma_ring_buffer_to_mem *buff, const volatile void **data_buff, size_t *len)
+int dma_ring_buffer_periph_to_mem_get_data(struct dma_ring_buffer_to_mem *buff, const volatile void **data_buff,
+						size_t *len)
 {
 	int ret_code = 0;
 	uint32_t ndtr;
@@ -167,7 +168,10 @@ int dma_ring_buffer_periph_to_mem_fill_level(struct dma_ring_buffer_to_mem *buff
 	return 0;
 }
 
-int dma_ring_buffer_mem_to_periph_initialize(struct dma_ring_buffer_to_periph *dma_buffer, uint8_t base_dma_id, DMA_Stream_TypeDef *dma_stream, size_t buffer_element_count, size_t element_size, volatile void *data_buffer, uint8_t dma_trigger_channel, void *dest_reg)
+int dma_ring_buffer_mem_to_periph_initialize(struct dma_ring_buffer_to_periph *dma_buffer, uint8_t base_dma_id,
+					     DMA_Stream_TypeDef *dma_stream, size_t buffer_element_count,
+					     size_t element_size, volatile void *data_buffer,
+					     uint8_t dma_trigger_channel, void *dest_reg)
 {
 	if (!dma_buffer || !dma_stream || !data_buffer || !dest_reg)
 		return -1000;
@@ -221,7 +225,8 @@ static void queue_or_start_dma_transfer(struct dma_ring_buffer_to_periph *buff)
 	buff->dma->CR |= DMA_SxCR_EN;
 }
 
-int dma_ring_buffer_mem_to_periph_insert_data(struct dma_ring_buffer_to_periph *buff, const void *data_to_insert, size_t count)
+int dma_ring_buffer_mem_to_periph_insert_data(struct dma_ring_buffer_to_periph *buff, const void *data_to_insert,
+					      size_t count)
 {
 	int ret = 0;
 	size_t free_item_count;
@@ -234,7 +239,8 @@ int dma_ring_buffer_mem_to_periph_insert_data(struct dma_ring_buffer_to_periph *
 		return -1000;
 
 	/* Check if data fits into buffer minus one element. If not: try full-1 buffer and rest
-	 * Buffer is not allowed to be completely full, because I cannot ddifferentiate a full buffer from a completely empty one
+	 * Buffer is not allowed to be completely full, because I cannot ddifferentiate a full buffer from a
+	 * completely empty one
 	 */
 	if (count >= buff->buffer_count) {
 		ret = dma_ring_buffer_mem_to_periph_insert_data(buff, data_to_insert, buff->buffer_count - 1);
@@ -247,7 +253,9 @@ int dma_ring_buffer_mem_to_periph_insert_data(struct dma_ring_buffer_to_periph *
 
 	/* Wait for buffer to be able to handle input */
 	do {
-		free_item_count = buff->buffer_count - calculate_ring_buffer_fill_level(buff->buffer_count, buff->dma_get_idx_current, buff->sw_put_idx);
+		free_item_count = buff->buffer_count -
+				calculate_ring_buffer_fill_level(buff->buffer_count, buff->dma_get_idx_current,
+								 buff->sw_put_idx);
 	} while (free_item_count < count+1);
 
 	/* Fillup buffer (max is buffer end, wrap around afterwards) */

stm-firmware/stm-periph/option-bytes.c

@@ -76,12 +76,14 @@ int stm_option_bytes_program(const struct option_bytes *opts)
 	reg |= (opts->read_protection << 8) & FLASH_OPTCR_RDP;
 	reg |= (opts->wdg_sw << 5) & FLASH_OPTCR_WDG_SW;
 
-	while (FLASH->SR & FLASH_SR_BSY);
+	while (FLASH->SR & FLASH_SR_BSY)
+		;
 
 	FLASH->OPTCR = reg;
 	FLASH->OPTCR |= FLASH_OPTCR_OPTSTRT;
 	__DSB();
-	while (FLASH->SR & FLASH_SR_BSY);
+	while (FLASH->SR & FLASH_SR_BSY)
+		;
 
 	FLASH->OPTCR |= FLASH_OPTCR_OPTLOCK;
 

stm-firmware/stm-periph/rcc-manager.c

@@ -95,9 +95,8 @@ int rcc_manager_enable_clock(volatile uint32_t *rcc_enable_register, uint8_t bit
 	int ret_val = 0;
 	struct rcc_enable_count *entry;
 
-	if (!rcc_enable_register || bit_no > 31) {
+	if (!rcc_enable_register || bit_no > 31)
 		return -1000;
-	}
 
 	/* Enable the clock in any case, no matter what follows */
 	*rcc_enable_register |= (1U<<bit_no);
@@ -132,9 +131,8 @@ int rcc_manager_disable_clock(volatile uint32_t *rcc_enable_register, uint8_t bi
 	int ret_val = -1;
 	struct rcc_enable_count *entry;
 
-	if (!rcc_enable_register || bit_no > 31) {
+	if (!rcc_enable_register || bit_no > 31)
 		return -1000;
-	}
 
 	entry = search_enable_entry_in_list(rcc_enable_register, bit_no);
 

stm-firmware/stm-periph/rng.c

@@ -30,7 +30,7 @@ void random_number_gen_init(bool int_enable)
 	random_number_gen_reset(int_enable);
 }
 
-void random_number_gen_deinit()
+void random_number_gen_deinit(void)
 {
 	RNG->CR = 0;
 	__DSB();
@@ -66,5 +66,5 @@ enum random_number_error random_number_gen_get_number(uint32_t *random_number, b
 		*random_number = RNG->DR;
 
 	/* Return from function with proper status */
-	return (value_ready ? RNG_ERROR_OK : RNG_ERROR_NOT_READY);
+	return value_ready ? RNG_ERROR_OK : RNG_ERROR_NOT_READY;
 }

stm-firmware/stm-periph/spi.c

@@ -65,7 +65,8 @@ static struct stm_spi_dev *spi_handle_to_struct(stm_spi_handle handle)
 	return dev;
 }
 
-stm_spi_handle spi_init(struct stm_spi_dev *spi_dev_struct, SPI_TypeDef *spi_regs, const struct stm_spi_settings *settings)
+stm_spi_handle spi_init(struct stm_spi_dev *spi_dev_struct, SPI_TypeDef *spi_regs,
+			const struct stm_spi_settings *settings)
 {
 	stm_spi_handle ret_handle = NULL;
 	uint32_t reg_val;
@@ -131,10 +132,14 @@ void spi_deinit(stm_spi_handle handle)
 
 static uint8_t transfer_byte(uint8_t byte, struct stm_spi_dev *dev)
 {
-	while (dev->spi_regs->SR & SPI_SR_BSY);
+	while (dev->spi_regs->SR & SPI_SR_BSY)
+		;
+
 	dev->spi_regs->DR = (uint16_t)byte;
 	__DSB();
-	while((dev->spi_regs->SR & SPI_SR_BSY) || !(dev->spi_regs->SR & SPI_SR_TXE));
+
+	while ((dev->spi_regs->SR & SPI_SR_BSY) || !(dev->spi_regs->SR & SPI_SR_TXE))
+		;
 
 	return (uint8_t)dev->spi_regs->DR;
 }

stm-firmware/stm-periph/uart.c

@@ -126,7 +126,9 @@ void uart_send_char(struct stm_uart *uart, char c)
 	if (!uart || !uart->uart_dev)
 		return;
 
-	while(!(uart->uart_dev->SR & USART_SR_TXE));
+	while (!(uart->uart_dev->SR & USART_SR_TXE))
+		;
+
 	uart->uart_dev->DR = c;
 }
 
@@ -175,7 +177,8 @@ char uart_get_char(struct stm_uart *uart)
 	if (!uart)
 		return 0;
 	/* Wait for data to be available */
-	while (!(uart->uart_dev->SR & USART_SR_RXNE));
+	while (!(uart->uart_dev->SR & USART_SR_RXNE))
+		;
 
 	return (char)uart->uart_dev->DR;
 }

stm-firmware/stm-periph/unique-id.c

@@ -43,3 +43,23 @@ void stm_dev_rev_id_get(uint32_t *device_id, uint32_t *revision_id)
 	if (revision_id)
 		*revision_id = (DBGMCU->IDCODE & DBGMCU_IDCODE_REV_ID) >> 16;
 }
+
+void stm_cpuid_get(uint8_t *implementer, uint8_t *variant, uint16_t *part_no, uint8_t *rev)
+{
+	uint32_t cpuid;
+
+	cpuid = SCB->CPUID;
+
+	if (implementer)
+		*implementer = (uint8_t)((cpuid >> 24) & 0xFFU);
+
+	if (variant)
+		*variant = (uint8_t)((cpuid >> 20) & 0x0FU);
+
+	if (part_no)
+		*part_no = (uint16_t)((cpuid >> 4) & 0x0FFFU);
+
+	if (rev)
+		*rev = (uint8_t)(cpuid & 0x0FU);
+
+}

stm-firmware/ui/gui.c

@@ -18,10 +18,12 @@
 * If not, see <http://www.gnu.org/licenses/>.
 */
 
+#include "reflow-controller/version.h"
 #include <reflow-controller/ui/gui.h>
 #include <reflow-controller/ui/gui-config.h>
 #include <reflow-controller/ui/menu.h>
 #include <reflow-controller/ui/lcd.h>
+#include <reflow-controller/sd.h>
 #include <reflow-controller/ui/rotary-encoder.h>
 #include <reflow-controller/systick.h>
 #include <reflow-controller/adc-meas.h>
@@ -166,9 +168,9 @@ static void gui_menu_about(struct lcd_menu *menu, enum menu_entry_func_entry ent
 			break;
 		last_page = 1;
 		menu_lcd_output(menu, 0, "Version Number:");
-		menu_lcd_outputf(menu, 1, "%.*s", LCD_CHAR_WIDTH, xstr(GIT_VER));
-		if (strlen(xstr(GIT_VER)) > LCD_CHAR_WIDTH) {
-			menu_lcd_outputf(menu, 2, "%s", &xstr(GIT_VER)[LCD_CHAR_WIDTH]);
+		menu_lcd_outputf(menu, 1, "%.*s", LCD_CHAR_WIDTH, version_git_version_string);
+		if (strlen(version_git_version_string) > LCD_CHAR_WIDTH) {
+			menu_lcd_outputf(menu, 2, "%s", &version_git_version_string[LCD_CHAR_WIDTH]);
 		}
 #ifdef DEBUGBUILD
 		menu_lcd_output(menu, 3, "Page 2/5 [DEBUG]");
@@ -691,6 +693,37 @@ static void gui_update_firmware(struct lcd_menu *menu, enum menu_entry_func_entr
 	}
 }
 
+static void gui_connector_info(struct lcd_menu *menu, enum menu_entry_func_entry entry_type, void *parent)
+{
+	static void *my_parent;
+	enum button_state button;
+
+	if (entry_type == MENU_ENTRY_FIRST_ENTER) {
+		my_parent = parent;
+		menu_display_clear(menu);
+
+		menu_lcd_output(menu, 0, "2,4: DIGIO[0,1]");
+		menu_lcd_output(menu, 1, "6: DIGIO2 (TX)");
+		menu_lcd_output(menu, 2, "8: DIGIO3 (RX)");
+		menu_lcd_output(menu, 3, "10:3V3 Rest:GND");
+	}
+
+	if (menu_get_button_ready_state(menu)) {
+		/* Buttons are ready. Read button */
+		button = menu_get_button_state(menu);
+		/* Throw away any rotation */
+		(void)menu_get_rotary_delta(menu);
+
+		if (button == BUTTON_SHORT_RELEASED || button == BUTTON_LONG ||
+				button == BUTTON_LONG_RELEASED) {
+			/* Exit menu */
+			menu_entry_dropback(menu, my_parent);
+		}
+	}
+
+
+}
+
 static char *overlay_heading = NULL;
 static char *overlay_text = NULL;
 
@@ -740,6 +773,7 @@ static void gui_menu_root_entry(struct lcd_menu *menu, enum menu_entry_func_entr
 		"Error Flags",
 		"About",
 		"Update",
+		"Connector Info",
 		NULL
 	};
 	static const menu_func_t root_entry_funcs[] = {
@@ -749,6 +783,7 @@ static void gui_menu_root_entry(struct lcd_menu *menu, enum menu_entry_func_entr
 		gui_menu_err_flags,
 		gui_menu_about,
 		gui_update_firmware,
+		gui_connector_info,
 	};
 	enum button_state push_button;
 	int16_t rot_delta;
@@ -756,7 +791,6 @@ static void gui_menu_root_entry(struct lcd_menu *menu, enum menu_entry_func_entr
 	if (entry_type != MENU_ENTRY_CONTINUE) {
 		menu_changed = true;
 		menu_display_clear(menu);
-		update_display_buffer(0, "Main Menu");
 		menu_ack_rotary_delta(menu);
 		if (entry_type == MENU_ENTRY_FIRST_ENTER) {
 			list.entry_names = root_entry_names;
@@ -767,6 +801,8 @@ static void gui_menu_root_entry(struct lcd_menu *menu, enum menu_entry_func_entr
 		}
 	}
 
+	update_display_buffer(0, sd_card_is_mounted() ? "Main Menu [SD]" : "Main Menu [--]");
+
 	push_button = menu_get_button_state(menu);
 	rot_delta = menu_get_rotary_delta(menu);
 

stm-firmware/ui/shell.c

@@ -48,13 +48,11 @@
 #include <stm-periph/option-bytes.h>
 #include <reflow-controller/ui/gui.h>
 #include <reflow-controller/ui/shell-uart.h>
+#include <reflow-controller/safety/flash-crc.h>
+#include <reflow-controller/version.h>
 
 #include <stdio.h>
 
-#ifndef GIT_VER
-#define GIT_VER "VERSION NOT SET"
-#endif
-
 static shellmatta_instance_t shell;
 static char shell_buffer[512];
 static char IN_SECTION(.ccm.bss) history_buffer[512];
@@ -70,14 +68,19 @@ static shellmatta_retCode_t shell_cmd_ver(const shellmatta_handle_t   handle,
 	uint32_t high_id;
 	uint32_t stm_rev_id;
 	uint32_t stm_dev_id;
+	uint8_t core_rev;
+	uint8_t core_implementer;
+	uint8_t core_variant;
+	uint16_t core_part_no;
 	const char *hw_rev_str;
 	enum hw_revision pcb_rev;
 
 	stm_unique_id_get(&high_id, &mid_id, &low_id);
 	stm_dev_rev_id_get(&stm_dev_id, &stm_rev_id);
 
-	shellmatta_printf(handle, "Reflow Oven Controller Firmware " xstr(GIT_VER) "\r\n"
-				"Compiled: " __DATE__ " at " __TIME__ "\r\n");
+	shellmatta_printf(handle, "Reflow Oven Controller Firmware %s\r\n"
+				"Compiled: %s at %s\r\n",
+				version_git_version_string, version_compile_date, version_compile_time);
 	shellmatta_printf(handle, "Serial: %08X-%08X-%08X\r\n", high_id, mid_id, low_id);
 
 	pcb_rev = get_pcb_hardware_version();
@@ -100,6 +103,12 @@ static shellmatta_retCode_t shell_cmd_ver(const shellmatta_handle_t   handle,
 	shellmatta_printf(handle, "STM Device ID: 0x%04X\r\n", stm_dev_id);
 	shellmatta_printf(handle, "STM Revision ID: 0x%04X\r\n", stm_rev_id);
 
+	stm_cpuid_get(&core_implementer, &core_variant, &core_part_no, &core_rev);
+	shellmatta_printf(handle, "CPU Implementer: 0x%02X\r\n", (unsigned int)core_implementer);
+	shellmatta_printf(handle, "CPU Variant: 0x%02X\r\n", (unsigned int)core_variant);
+	shellmatta_printf(handle, "CPU Part No.: 0x%04X\r\n", (unsigned int)core_part_no);
+	shellmatta_printf(handle, "CPU Revision: 0x%02X\r\n", (unsigned int)core_rev);
+
 	return SHELLMATTA_OK;
 }
 
@@ -849,6 +858,7 @@ shellmatta_retCode_t shell_cmd_execute(const shellmatta_handle_t handle, const c
 shellmatta_retCode_t shell_cmd_cycle_count(const shellmatta_handle_t handle, const char *args, uint32_t len)
 {
 	uint64_t counter;
+	uint32_t core_cycle_count;
 	(void)args;
 	(void)len;
 	char option;
@@ -856,8 +866,10 @@ shellmatta_retCode_t shell_cmd_cycle_count(const shellmatta_handle_t handle, con
 	uint32_t arg_len;
 	int opt_stat;
 	bool clear = false;
+	bool hex = false;
 	const shellmatta_opt_long_t options[] = {
 		{"clear", 'c', SHELLMATTA_OPT_ARG_NONE},
+		{"hex", 'h', SHELLMATTA_OPT_ARG_NONE},
 		{NULL, '\0', SHELLMATTA_OPT_ARG_NONE},
 	};
 
@@ -869,6 +881,8 @@ shellmatta_retCode_t shell_cmd_cycle_count(const shellmatta_handle_t handle, con
 		case 'c':
 			clear = true;
 			break;
+		case 'h':
+			hex = true;
 		default:
 			break;
 		}
@@ -876,10 +890,18 @@ shellmatta_retCode_t shell_cmd_cycle_count(const shellmatta_handle_t handle, con
 
 
 	counter = main_cycle_counter_get();
-	shellmatta_printf(handle, "%"PRIu64"\r\n", counter);
-	if (clear)
-		main_cycle_counter_init();
-
+	core_cycle_count = core_cycle_counter_get();
+	if (hex) {
+		shellmatta_printf(handle, "Main loop: 0x%016"PRIX64"\r\n", counter);
+		shellmatta_printf(handle, "CPU cycles: 0x%08"PRIX32"\r\n", core_cycle_count);
+	} else {
+		shellmatta_printf(handle, "Main loop: %"PRIu64"\r\n", counter);
+		shellmatta_printf(handle, "CPU cycles: %"PRIu32"\r\n", core_cycle_count);
+	}
+	if (clear) {
+		main_cycle_counter_reset();
+		core_cycle_counter_reset();
+	}
 	return SHELLMATTA_OK;
 }
 
@@ -997,6 +1019,53 @@ shellmatta_retCode_t shell_cmd_set_baud(const shellmatta_handle_t handle, const
 	return SHELLMATTA_OK;
 }
 
+static void shell_print_crc_line(const shellmatta_handle_t handle, const char *name,
+				 uint32_t crc, uint32_t crc_expected)
+{
+	shellmatta_printf(handle, "%-15s0x%08x    0x%08x  [%s]\r\n",
+			  name,
+			  crc,
+			  crc_expected,
+			  crc != crc_expected ? "\e[1;31mERR\e[m" : "\e[32mOK\e[m");
+}
+
+shellmatta_retCode_t shell_cmd_flash_crc(const shellmatta_handle_t handle, const char *args, uint32_t len)
+{
+	(void)args;
+	(void)len;
+	uint32_t crc = 0;
+	uint32_t crc_expected = 0;
+	int res;
+
+	shellmatta_printf(handle, "               Calculated    Expected    State\r\n\r\n");
+
+	res = flash_crc_calc_section(FLASH_CRC_VECTOR, &crc);
+	crc_expected = flash_crc_get_expected_crc(FLASH_CRC_VECTOR);
+	if (res)
+		shellmatta_printf(handle, "Error during calculation!\r\n");
+	shell_print_crc_line(handle, "Vector CRC:", crc, crc_expected);
+
+	res = flash_crc_calc_section(FLASH_CRC_TEXT, &crc);
+	crc_expected = flash_crc_get_expected_crc(FLASH_CRC_TEXT);
+	if (res)
+		shellmatta_printf(handle, "Error during calculation!\r\n");
+	shell_print_crc_line(handle, "Code CRC:", crc, crc_expected);
+
+	res = flash_crc_calc_section(FLASH_CRC_DATA, &crc);
+	crc_expected = flash_crc_get_expected_crc(FLASH_CRC_DATA);
+	if (res)
+		shellmatta_printf(handle, "Error during calculation!\r\n");
+	shell_print_crc_line(handle, "Data CRC:", crc, crc_expected);
+
+	res = flash_crc_calc_section(FLASH_CRC_CCMDATA, &crc);
+	crc_expected = flash_crc_get_expected_crc(FLASH_CRC_CCMDATA);
+	if (res)
+		shellmatta_printf(handle, "Error during calculation!\r\n");
+	shell_print_crc_line(handle, "CCM Data CRC:", crc, crc_expected);
+
+	return SHELLMATTA_OK;
+}
+
 //typedef struct shellmatta_cmd
 //{
 //    char                    *cmd;       /**< command name                           */
@@ -1006,7 +1075,7 @@ shellmatta_retCode_t shell_cmd_set_baud(const shellmatta_handle_t handle, const
 //    shellmatta_cmdFct_t     cmdFct;     /**< pointer to the cmd callack function    */
 //    struct shellmatta_cmd   *next;      /**< pointer to next command or NULL        */
 //} shellmatta_cmd_t;
-static shellmatta_cmd_t cmd[25] = {
+static shellmatta_cmd_t cmd[26] = {
 	{
 		.cmd = "version",
 		.cmdAlias = "ver",
@@ -1202,10 +1271,18 @@ static shellmatta_cmd_t cmd[25] = {
 	},
 	{
 		.cmd = "baudrate",
-		.cmdAlias = "opt-bytes",
+		.cmdAlias = "baud",
 		.helpText = "Set a new temporary baudrate for the UART",
 		.usageText = "baudrate <new baud>",
 		.cmdFct = shell_cmd_set_baud,
+		.next = &cmd[25],
+	},
+	{
+		.cmd = "flashcrc",
+		.cmdAlias = "fcrc",
+		.helpText = "Calculate the Flash CRCs",
+		.usageText = "flashcrc",
+		.cmdFct = shell_cmd_flash_crc,
 		.next = NULL,
 	},
 

stm-firmware/updater/ram-code/CMakeLists.txt

@@ -31,7 +31,7 @@ add_executable(${ELFFILE} ${SRCS} ${FATFS_SRCS} ${SDIO_SRCS} ${STM_PERIPH_SRCS}
 target_include_directories(${ELFFILE} PRIVATE ${CMAKE_CURRENT_SOURCE_DIR}/include ../../include ${CMAKE_CURRENT_SOURCE_DIR}/3rd-party)
 target_compile_options(${ELFFILE} PRIVATE -Wall -Wextra -Wold-style-declaration -Wuninitialized -Wmaybe-uninitialized -Wunused-parameter)
 target_compile_options(${ELFFILE} PRIVATE -mlittle-endian -mthumb -mcpu=cortex-m4 -mthumb-interwork -mfloat-abi=hard -mfpu=fpv4-sp-d16 -nostartfiles -Wimplicit-fallthrough=3 -Wsign-compare -Os -g3)
-target_compile_definitions(${ELFFILE} PRIVATE -DGIT_VER=${GIT_DESCRIBE} -DHSE_VALUE=8000000UL -DSTM32F407xx -DSTM32F4XX -DARM_MATH_CM4 -DSAFETY_MEMORY_STRIPOUT_DUMP)
+target_compile_definitions(${ELFFILE} PRIVATE -DHSE_VALUE=8000000UL -DSTM32F407xx -DSTM32F4XX -DARM_MATH_CM4 -DSAFETY_MEMORY_STRIPOUT_DUMP)
 target_link_options(${ELFFILE} PRIVATE -mlittle-endian -mthumb -mcpu=cortex-m4 -mthumb-interwork -mfloat-abi=hard -mfpu=fpv4-sp-d16 --disable-newlib-supplied-syscalls -nostartfiles -T${LINKER_SCRIPT} -Wl,--print-memory-usage)
 set(GEN_HEADER_PATH "${CMAKE_CURRENT_BINARY_DIR}/include/generated")
 set(GEN_HEADER_FILE "${GEN_HEADER_PATH}/${PROJECT_NAME}.bin.h")

stm-firmware/updater/ram-code/bin2carray.py

@@ -1,35 +1,45 @@
 #!env python
 
-# Convert a file to a c array
-# bin2carray <output file> <input file>
+"""
+Convert a file to a c array
+bin2carray <output file> <input file>
+"""
 
 import os
 import os.path
 import sys
 
+def main():
+    """
+    Main script function
+    """
     if len(sys.argv) < 3:
-	sys.exit(-1)
+        return -1
 
     source_file = sys.argv[2]
     dest_file = sys.argv[1]
 
-print("%s --> %s" % (source_file, dest_file))
+    print(f'{source_file} --> {dest_file}')
 
-with open(source_file, "rb") as src:
+    with open(source_file, 'rb') as src:
         data = src.read()
 
-with open(dest_file, "w") as dest:
-	header_guard = "__" + os.path.basename(dest_file).replace('.', '_').replace('-', '_') + "_H__"
-	dest.write("#ifndef %s\n" % (header_guard))
-	dest.write("#define %s\n" % (header_guard))
-	dest.write("static const char binary_blob[%d] = {\n" % (len(data)))
-	for current,idx in zip(data, range(len(data))):
-		if ((idx+1) % 4 == 0):
-			dest.write(hex(current)+",\n")
+    with open(dest_file, 'w', encoding='utf-8') as dest:
+        header_guard = '_' + os.path.basename(dest_file).replace('.', '_').replace('-', '_') + '_H_'
+        header_guard = header_guard.upper()
+        dest.write(f'#ifndef {header_guard}\n')
+        dest.write(f'#define {header_guard}\n')
+        dest.write(f'static const char binary_blob[{len(data)}] = {{\n')
+        for idx, current in enumerate(data, start=1):
+            if idx % 4 == 0:
+                dest.write(hex(current)+',\n')
             else:
-			dest.write(hex(current)+",")
+                dest.write(hex(current)+',')
 
-	dest.write("};\n")
-	dest.write("#endif /* %s */\n" % (header_guard))
+        dest.write('};\n')
+        dest.write(f'#endif /* {header_guard} */\n')
 
-sys.exit(0)
+    return 0
+
+if __name__ == '__main__':
+    sys.exit(main())

stm-firmware/updater/ram-code/fatfs/ffsystem.c

@@ -1,170 +1,208 @@
 /*------------------------------------------------------------------------*/
-/* Sample Code of OS Dependent Functions for FatFs                        */
-/* (C)ChaN, 2018                                                          */
+/* A Sample Code of User Provided OS Dependent Functions for FatFs        */
 /*------------------------------------------------------------------------*/
 
-
 #include <fatfs/ff.h>
 
 
-#if FF_USE_LFN == 3	/* Dynamic memory allocation */
+#if FF_USE_LFN == 3	/* Use dynamic memory allocation */
 
 /*------------------------------------------------------------------------*/
-/* Allocate a memory block                                                */
+/* Allocate/Free a Memory Block                                           */
 /*------------------------------------------------------------------------*/
 
+#include <stdlib.h>		/* with POSIX API */
+
+
 void* ff_memalloc (	/* Returns pointer to the allocated memory block (null if not enough core) */
 	UINT msize		/* Number of bytes to allocate */
 )
 {
-	return malloc(msize);	/* Allocate a new memory block with POSIX API */
+	return malloc((size_t)msize);	/* Allocate a new memory block */
 }
 
 
-/*------------------------------------------------------------------------*/
-/* Free a memory block                                                    */
-/*------------------------------------------------------------------------*/
-
 void ff_memfree (
-	void* mblock	/* Pointer to the memory block to free (nothing to do if null) */
+	void* mblock	/* Pointer to the memory block to free (no effect if null) */
 )
 {
-	free(mblock);	/* Free the memory block with POSIX API */
+	free(mblock);	/* Free the memory block */
 }
 
 #endif
 
 
 
+
 #if FF_FS_REENTRANT	/* Mutal exclusion */
-
 /*------------------------------------------------------------------------*/
-/* Create a Synchronization Object                                        */
+/* Definitions of Mutex                                                   */
 /*------------------------------------------------------------------------*/
-/* This function is called in f_mount() function to create a new
-/  synchronization object for the volume, such as semaphore and mutex.
-/  When a 0 is returned, the f_mount() function fails with FR_INT_ERR.
-*/
 
-//const osMutexDef_t Mutex[FF_VOLUMES];	/* Table of CMSIS-RTOS mutex */
+#define OS_TYPE	0	/* 0:Win32, 1:uITRON4.0, 2:uC/OS-II, 3:FreeRTOS, 4:CMSIS-RTOS */
 
 
-int ff_cre_syncobj (	/* 1:Function succeeded, 0:Could not create the sync object */
-	BYTE vol,			/* Corresponding volume (logical drive number) */
-	FF_SYNC_t* sobj		/* Pointer to return the created sync object */
-)
-{
-	/* Win32 */
-	*sobj = CreateMutex(NULL, FALSE, NULL);
-	return (int)(*sobj != INVALID_HANDLE_VALUE);
+#if   OS_TYPE == 0	/* Win32 */
+#include <windows.h>
+static HANDLE Mutex[FF_VOLUMES + 1];	/* Table of mutex handle */
 
-	/* uITRON */
-//	T_CSEM csem = {TA_TPRI,1,1};
-//	*sobj = acre_sem(&csem);
-//	return (int)(*sobj > 0);
+#elif OS_TYPE == 1	/* uITRON */
+#include "itron.h"
+#include "kernel.h"
+static mtxid Mutex[FF_VOLUMES + 1];		/* Table of mutex ID */
 
-	/* uC/OS-II */
-//	OS_ERR err;
-//	*sobj = OSMutexCreate(0, &err);
-//	return (int)(err == OS_NO_ERR);
+#elif OS_TYPE == 2	/* uc/OS-II */
+#include "includes.h"
+static OS_EVENT *Mutex[FF_VOLUMES + 1];	/* Table of mutex pinter */
 
-	/* FreeRTOS */
-//	*sobj = xSemaphoreCreateMutex();
-//	return (int)(*sobj != NULL);
+#elif OS_TYPE == 3	/* FreeRTOS */
+#include "FreeRTOS.h"
+#include "semphr.h"
+static SemaphoreHandle_t Mutex[FF_VOLUMES + 1];	/* Table of mutex handle */
 
-	/* CMSIS-RTOS */
-//	*sobj = osMutexCreate(&Mutex[vol]);
-//	return (int)(*sobj != NULL);
-}
-
-
-/*------------------------------------------------------------------------*/
-/* Delete a Synchronization Object                                        */
-/*------------------------------------------------------------------------*/
-/* This function is called in f_mount() function to delete a synchronization
-/  object that created with ff_cre_syncobj() function. When a 0 is returned,
-/  the f_mount() function fails with FR_INT_ERR.
-*/
-
-int ff_del_syncobj (	/* 1:Function succeeded, 0:Could not delete due to an error */
-	FF_SYNC_t sobj		/* Sync object tied to the logical drive to be deleted */
-)
-{
-	/* Win32 */
-	return (int)CloseHandle(sobj);
-
-	/* uITRON */
-//	return (int)(del_sem(sobj) == E_OK);
-
-	/* uC/OS-II */
-//	OS_ERR err;
-//	OSMutexDel(sobj, OS_DEL_ALWAYS, &err);
-//	return (int)(err == OS_NO_ERR);
-
-	/* FreeRTOS */
-//  vSemaphoreDelete(sobj);
-//	return 1;
-
-	/* CMSIS-RTOS */
-//	return (int)(osMutexDelete(sobj) == osOK);
-}
-
-
-/*------------------------------------------------------------------------*/
-/* Request Grant to Access the Volume                                     */
-/*------------------------------------------------------------------------*/
-/* This function is called on entering file functions to lock the volume.
-/  When a 0 is returned, the file function fails with FR_TIMEOUT.
-*/
-
-int ff_req_grant (	/* 1:Got a grant to access the volume, 0:Could not get a grant */
-	FF_SYNC_t sobj	/* Sync object to wait */
-)
-{
-	/* Win32 */
-	return (int)(WaitForSingleObject(sobj, FF_FS_TIMEOUT) == WAIT_OBJECT_0);
-
-	/* uITRON */
-//	return (int)(wai_sem(sobj) == E_OK);
-
-	/* uC/OS-II */
-//	OS_ERR err;
-//	OSMutexPend(sobj, FF_FS_TIMEOUT, &err));
-//	return (int)(err == OS_NO_ERR);
-
-	/* FreeRTOS */
-//	return (int)(xSemaphoreTake(sobj, FF_FS_TIMEOUT) == pdTRUE);
-
-	/* CMSIS-RTOS */
-//	return (int)(osMutexWait(sobj, FF_FS_TIMEOUT) == osOK);
-}
-
-
-/*------------------------------------------------------------------------*/
-/* Release Grant to Access the Volume                                     */
-/*------------------------------------------------------------------------*/
-/* This function is called on leaving file functions to unlock the volume.
-*/
-
-void ff_rel_grant (
-	FF_SYNC_t sobj	/* Sync object to be signaled */
-)
-{
-	/* Win32 */
-	ReleaseMutex(sobj);
-
-	/* uITRON */
-//	sig_sem(sobj);
-
-	/* uC/OS-II */
-//	OSMutexPost(sobj);
-
-	/* FreeRTOS */
-//	xSemaphoreGive(sobj);
-
-	/* CMSIS-RTOS */
-//	osMutexRelease(sobj);
-}
+#elif OS_TYPE == 4	/* CMSIS-RTOS */
+#include "cmsis_os.h"
+static osMutexId Mutex[FF_VOLUMES + 1];	/* Table of mutex ID */
 
 #endif
 
+
+
+/*------------------------------------------------------------------------*/
+/* Create a Mutex                                                         */
+/*------------------------------------------------------------------------*/
+/* This function is called in f_mount function to create a new mutex
+/  or semaphore for the volume. When a 0 is returned, the f_mount function
+/  fails with FR_INT_ERR.
+*/
+
+int ff_mutex_create (	/* Returns 1:Function succeeded or 0:Could not create the mutex */
+	int vol				/* Mutex ID: Volume mutex (0 to FF_VOLUMES - 1) or system mutex (FF_VOLUMES) */
+)
+{
+#if OS_TYPE == 0	/* Win32 */
+	Mutex[vol] = CreateMutex(NULL, FALSE, NULL);
+	return (int)(Mutex[vol] != INVALID_HANDLE_VALUE);
+
+#elif OS_TYPE == 1	/* uITRON */
+	T_CMTX cmtx = {TA_TPRI,1};
+
+	Mutex[vol] = acre_mtx(&cmtx);
+	return (int)(Mutex[vol] > 0);
+
+#elif OS_TYPE == 2	/* uC/OS-II */
+	OS_ERR err;
+
+	Mutex[vol] = OSMutexCreate(0, &err);
+	return (int)(err == OS_NO_ERR);
+
+#elif OS_TYPE == 3	/* FreeRTOS */
+	Mutex[vol] = xSemaphoreCreateMutex();
+	return (int)(Mutex[vol] != NULL);
+
+#elif OS_TYPE == 4	/* CMSIS-RTOS */
+	osMutexDef(cmsis_os_mutex);
+
+	Mutex[vol] = osMutexCreate(osMutex(cmsis_os_mutex));
+	return (int)(Mutex[vol] != NULL);
+
+#endif
+}
+
+
+/*------------------------------------------------------------------------*/
+/* Delete a Mutex                                                         */
+/*------------------------------------------------------------------------*/
+/* This function is called in f_mount function to delete a mutex or
+/  semaphore of the volume created with ff_mutex_create function.
+*/
+
+void ff_mutex_delete (	/* Returns 1:Function succeeded or 0:Could not delete due to an error */
+	int vol				/* Mutex ID: Volume mutex (0 to FF_VOLUMES - 1) or system mutex (FF_VOLUMES) */
+)
+{
+#if OS_TYPE == 0	/* Win32 */
+	CloseHandle(Mutex[vol]);
+
+#elif OS_TYPE == 1	/* uITRON */
+	del_mtx(Mutex[vol]);
+
+#elif OS_TYPE == 2	/* uC/OS-II */
+	OS_ERR err;
+
+	OSMutexDel(Mutex[vol], OS_DEL_ALWAYS, &err);
+
+#elif OS_TYPE == 3	/* FreeRTOS */
+	vSemaphoreDelete(Mutex[vol]);
+
+#elif OS_TYPE == 4	/* CMSIS-RTOS */
+	osMutexDelete(Mutex[vol]);
+
+#endif
+}
+
+
+/*------------------------------------------------------------------------*/
+/* Request a Grant to Access the Volume                                   */
+/*------------------------------------------------------------------------*/
+/* This function is called on enter file functions to lock the volume.
+/  When a 0 is returned, the file function fails with FR_TIMEOUT.
+*/
+
+int ff_mutex_take (	/* Returns 1:Succeeded or 0:Timeout */
+	int vol			/* Mutex ID: Volume mutex (0 to FF_VOLUMES - 1) or system mutex (FF_VOLUMES) */
+)
+{
+#if OS_TYPE == 0	/* Win32 */
+	return (int)(WaitForSingleObject(Mutex[vol], FF_FS_TIMEOUT) == WAIT_OBJECT_0);
+
+#elif OS_TYPE == 1	/* uITRON */
+	return (int)(tloc_mtx(Mutex[vol], FF_FS_TIMEOUT) == E_OK);
+
+#elif OS_TYPE == 2	/* uC/OS-II */
+	OS_ERR err;
+
+	OSMutexPend(Mutex[vol], FF_FS_TIMEOUT, &err));
+	return (int)(err == OS_NO_ERR);
+
+#elif OS_TYPE == 3	/* FreeRTOS */
+	return (int)(xSemaphoreTake(Mutex[vol], FF_FS_TIMEOUT) == pdTRUE);
+
+#elif OS_TYPE == 4	/* CMSIS-RTOS */
+	return (int)(osMutexWait(Mutex[vol], FF_FS_TIMEOUT) == osOK);
+
+#endif
+}
+
+
+
+/*------------------------------------------------------------------------*/
+/* Release a Grant to Access the Volume                                   */
+/*------------------------------------------------------------------------*/
+/* This function is called on leave file functions to unlock the volume.
+*/
+
+void ff_mutex_give (
+	int vol			/* Mutex ID: Volume mutex (0 to FF_VOLUMES - 1) or system mutex (FF_VOLUMES) */
+)
+{
+#if OS_TYPE == 0	/* Win32 */
+	ReleaseMutex(Mutex[vol]);
+
+#elif OS_TYPE == 1	/* uITRON */
+	unl_mtx(Mutex[vol]);
+
+#elif OS_TYPE == 2	/* uC/OS-II */
+	OSMutexPost(Mutex[vol]);
+
+#elif OS_TYPE == 3	/* FreeRTOS */
+	xSemaphoreGive(Mutex[vol]);
+
+#elif OS_TYPE == 4	/* CMSIS-RTOS */
+	osMutexRelease(Mutex[vol]);
+
+#endif
+}
+
+#endif	/* FF_FS_REENTRANT */
+

stm-firmware/updater/ram-code/fatfs/ffunicode.c

@@ -1,13 +1,13 @@
 /*------------------------------------------------------------------------*/
-/* Unicode handling functions for FatFs R0.13+                            */
+/* Unicode Handling Functions for FatFs R0.13 and Later                   */
+/*------------------------------------------------------------------------*/
+/* This module will occupy a huge memory in the .rodata section when the  */
+/* FatFs is configured for LFN with DBCS. If the system has a Unicode     */
+/* library for the code conversion, this module should be modified to use */
+/* it to avoid silly memory consumption.                                  */
 /*------------------------------------------------------------------------*/
-/* This module will occupy a huge memory in the .const section when the    /
-/  FatFs is configured for LFN with DBCS. If the system has any Unicode    /
-/  utilitiy for the code conversion, this module should be modified to use /
-/  that function to avoid silly memory consumption.                        /
-/-------------------------------------------------------------------------*/
 /*
-/ Copyright (C) 2014, ChaN, all right reserved.
+/ Copyright (C) 2022, ChaN, all right reserved.
 /
 / FatFs module is an open source software. Redistribution and use of FatFs in
 / source and binary forms, with or without modification, are permitted provided
@@ -22,10 +22,9 @@
 / by use of this software.
 */
 
-
 #include <fatfs/ff.h>
 
-#if FF_USE_LFN	/* This module will be blanked if non-LFN configuration */
+#if FF_USE_LFN != 0	/* This module will be blanked if in non-LFN configuration */
 
 #define MERGE2(a, b) a ## b
 #define CVTBL(tbl, cp) MERGE2(tbl, cp)
@@ -15214,8 +15213,8 @@ static const WCHAR uc869[] = {	/*  CP869(Greek 2) to Unicode conversion table */
 
 
 /*------------------------------------------------------------------------*/
-/* OEM <==> Unicode conversions for static code page configuration        */
-/* SBCS fixed code page                                                   */
+/* OEM <==> Unicode Conversions for Static Code Page Configuration with   */
+/* SBCS Fixed Code Page                                                   */
 /*------------------------------------------------------------------------*/
 
 #if FF_CODE_PAGE != 0 && FF_CODE_PAGE < 900
@@ -15267,8 +15266,8 @@ WCHAR ff_oem2uni (	/* Returns Unicode character in UTF-16, zero on error */
 
 
 /*------------------------------------------------------------------------*/
-/* OEM <==> Unicode conversions for static code page configuration        */
-/* DBCS fixed code page                                                   */
+/* OEM <==> Unicode Conversions for Static Code Page Configuration with   */
+/* DBCS Fixed Code Page                                                   */
 /*------------------------------------------------------------------------*/
 
 #if FF_CODE_PAGE >= 900
@@ -15346,7 +15345,7 @@ WCHAR ff_oem2uni (	/* Returns Unicode character in UTF-16, zero on error */
 
 
 /*------------------------------------------------------------------------*/
-/* OEM <==> Unicode conversions for dynamic code page configuration       */
+/* OEM <==> Unicode Conversions for Dynamic Code Page Configuration       */
 /*------------------------------------------------------------------------*/
 
 #if FF_CODE_PAGE == 0
@@ -15458,7 +15457,7 @@ WCHAR ff_oem2uni (	/* Returns Unicode character in UTF-16, zero on error */
 
 
 /*------------------------------------------------------------------------*/
-/* Unicode up-case conversion                                             */
+/* Unicode Up-case Conversion                                             */
 /*------------------------------------------------------------------------*/
 
 DWORD ff_wtoupper (	/* Returns up-converted code point */
@@ -15590,4 +15589,4 @@ DWORD ff_wtoupper (	/* Returns up-converted code point */
 }
 
 
-#endif /* #if FF_USE_LFN */
+#endif /* #if FF_USE_LFN != 0 */

stm-firmware/updater/ram-code/include/fatfs/ff.h

@@ -1,8 +1,8 @@
 /*----------------------------------------------------------------------------/
-/  FatFs - Generic FAT Filesystem module  R0.14b                              /
+/  FatFs - Generic FAT Filesystem module  R0.15                               /
 /-----------------------------------------------------------------------------/
 /
-/ Copyright (C) 2021, ChaN, all right reserved.
+/ Copyright (C) 2022, ChaN, all right reserved.
 /
 / FatFs module is an open source software. Redistribution and use of FatFs in
 / source and binary forms, with or without modification, are permitted provided
@@ -20,7 +20,7 @@
 
 
 #ifndef FF_DEFINED
-#define FF_DEFINED	86631	/* Revision ID */
+#define FF_DEFINED	80286	/* Revision ID */
 
 #ifdef __cplusplus
 extern "C" {
@@ -131,10 +131,11 @@ extern const char* VolumeStr[FF_VOLUMES];	/* User defied volume ID */
 
 typedef struct {
 	BYTE	fs_type;		/* Filesystem type (0:not mounted) */
-	BYTE	pdrv;			/* Associated physical drive */
+	BYTE	pdrv;			/* Volume hosting physical drive */
+	BYTE	ldrv;			/* Logical drive number (used only when FF_FS_REENTRANT) */
 	BYTE	n_fats;			/* Number of FATs (1 or 2) */
-	BYTE	wflag;			/* win[] flag (b0:dirty) */
-	BYTE	fsi_flag;		/* FSINFO flags (b7:disabled, b0:dirty) */
+	BYTE	wflag;			/* win[] status (b0:dirty) */
+	BYTE	fsi_flag;		/* FSINFO status (b7:disabled, b0:dirty) */
 	WORD	id;				/* Volume mount ID */
 	WORD	n_rootdir;		/* Number of root directory entries (FAT12/16) */
 	WORD	csize;			/* Cluster size [sectors] */
@@ -147,9 +148,6 @@ typedef struct {
 #if FF_FS_EXFAT
 	BYTE*	dirbuf;			/* Directory entry block scratchpad buffer for exFAT */
 #endif
-#if FF_FS_REENTRANT
-	FF_SYNC_t	sobj;		/* Identifier of sync object */
-#endif
 #if !FF_FS_READONLY
 	DWORD	last_clst;		/* Last allocated cluster */
 	DWORD	free_clst;		/* Number of free clusters */
@@ -163,10 +161,10 @@ typedef struct {
 #endif
 #endif
 	DWORD	n_fatent;		/* Number of FAT entries (number of clusters + 2) */
-	DWORD	fsize;			/* Size of an FAT [sectors] */
+	DWORD	fsize;			/* Number of sectors per FAT */
 	LBA_t	volbase;		/* Volume base sector */
 	LBA_t	fatbase;		/* FAT base sector */
-	LBA_t	dirbase;		/* Root directory base sector/cluster */
+	LBA_t	dirbase;		/* Root directory base sector (FAT12/16) or cluster (FAT32/exFAT) */
 	LBA_t	database;		/* Data base sector */
 #if FF_FS_EXFAT
 	LBA_t	bitbase;		/* Allocation bitmap base sector */
@@ -181,7 +179,7 @@ typedef struct {
 
 typedef struct {
 	FATFS*	fs;				/* Pointer to the hosting volume of this object */
-	WORD	id;				/* Hosting volume mount ID */
+	WORD	id;				/* Hosting volume's mount ID */
 	BYTE	attr;			/* Object attribute */
 	BYTE	stat;			/* Object chain status (b1-0: =0:not contiguous, =2:contiguous, =3:fragmented in this session, b2:sub-directory stretched) */
 	DWORD	sclust;			/* Object data start cluster (0:no cluster or root directory) */
@@ -250,7 +248,7 @@ typedef struct {
 	WORD	ftime;			/* Modified time */
 	BYTE	fattrib;		/* File attribute */
 #if FF_USE_LFN
-	TCHAR	altname[FF_SFN_BUF + 1];/* Altenative file name */
+	TCHAR	altname[FF_SFN_BUF + 1];/* Alternative file name */
 	TCHAR	fname[FF_LFN_BUF + 1];	/* Primary file name */
 #else
 	TCHAR	fname[12 + 1];	/* File name */
@@ -298,8 +296,10 @@ typedef enum {
 
 
 
+
+/*--------------------------------------------------------------*/
+/* FatFs Module Application Interface                           */
 /*--------------------------------------------------------------*/
-/* FatFs module application interface                           */
 
 FRESULT f_open (FIL* fp, const TCHAR* path, BYTE mode);				/* Open or create a file */
 FRESULT f_close (FIL* fp);											/* Close an open file object */
@@ -336,6 +336,8 @@ int f_puts (const TCHAR* str, FIL* cp);								/* Put a string to the file */
 int f_printf (FIL* fp, const TCHAR* str, ...);						/* Put a formatted string to the file */
 TCHAR* f_gets (TCHAR* buff, int len, FIL* fp);						/* Get a string from the file */
 
+/* Some API fucntions are implemented as macro */
+
 #define f_eof(fp) ((int)((fp)->fptr == (fp)->obj.objsize))
 #define f_error(fp) ((fp)->err)
 #define f_tell(fp) ((fp)->fptr)
@@ -349,38 +351,43 @@ TCHAR* f_gets (TCHAR* buff, int len, FIL* fp);						/* Get a string from the fil
 
 
 /*--------------------------------------------------------------*/
-/* Additional user defined functions                            */
+/* Additional Functions                                         */
+/*--------------------------------------------------------------*/
 
-/* RTC function */
+/* RTC function (provided by user) */
 #if !FF_FS_READONLY && !FF_FS_NORTC
-DWORD get_fattime (void);
+DWORD get_fattime (void);	/* Get current time */
 #endif
 
-/* LFN support functions */
-#if FF_USE_LFN >= 1						/* Code conversion (defined in unicode.c) */
+
+/* LFN support functions (defined in ffunicode.c) */
+
+#if FF_USE_LFN >= 1
 WCHAR ff_oem2uni (WCHAR oem, WORD cp);	/* OEM code to Unicode conversion */
 WCHAR ff_uni2oem (DWORD uni, WORD cp);	/* Unicode to OEM code conversion */
 DWORD ff_wtoupper (DWORD uni);			/* Unicode upper-case conversion */
 #endif
+
+
+/* O/S dependent functions (samples available in ffsystem.c) */
+
 #if FF_USE_LFN == 3		/* Dynamic memory allocation */
 void* ff_memalloc (UINT msize);		/* Allocate memory block */
 void ff_memfree (void* mblock);		/* Free memory block */
 #endif
-
-/* Sync functions */
-#if FF_FS_REENTRANT
-int ff_cre_syncobj (BYTE vol, FF_SYNC_t* sobj);	/* Create a sync object */
-int ff_req_grant (FF_SYNC_t sobj);		/* Lock sync object */
-void ff_rel_grant (FF_SYNC_t sobj);		/* Unlock sync object */
-int ff_del_syncobj (FF_SYNC_t sobj);	/* Delete a sync object */
+#if FF_FS_REENTRANT	/* Sync functions */
+int ff_mutex_create (int vol);		/* Create a sync object */
+void ff_mutex_delete (int vol);		/* Delete a sync object */
+int ff_mutex_take (int vol);		/* Lock sync object */
+void ff_mutex_give (int vol);		/* Unlock sync object */
 #endif
 
 
 
 
 /*--------------------------------------------------------------*/
-/* Flags and offset address                                     */
-
+/* Flags and Offset Address                                     */
+/*--------------------------------------------------------------*/
 
 /* File access mode and open method flags (3rd argument of f_open) */
 #define	FA_READ				0x01

stm-firmware/updater/ram-code/include/fatfs/ffconf.h

@@ -1,8 +1,8 @@
 /*---------------------------------------------------------------------------/
-/  FatFs Functional Configurations
+/  Configurations of FatFs Module
 /---------------------------------------------------------------------------*/
 
-#define FFCONF_DEF	86631	/* Revision ID */
+#define FFCONF_DEF	80286	/* Revision ID */
 
 /*---------------------------------------------------------------------------/
 / Function Configurations
@@ -68,7 +68,7 @@
 /   2: Enable with LF-CRLF conversion.
 /
 /  FF_PRINT_LLI = 1 makes f_printf() support long long argument and FF_PRINT_FLOAT = 1/2
-   makes f_printf() support floating point argument. These features want C99 or later.
+/  makes f_printf() support floating point argument. These features want C99 or later.
 /  When FF_LFN_UNICODE >= 1 with LFN enabled, string functions convert the character
 /  encoding in it. FF_STRF_ENCODE selects assumption of character encoding ON THE FILE
 /  to be read/written via those functions.
@@ -178,7 +178,7 @@
 /  logical drives. Number of items must not be less than FF_VOLUMES. Valid
 /  characters for the volume ID strings are A-Z, a-z and 0-9, however, they are
 /  compared in case-insensitive. If FF_STR_VOLUME_ID >= 1 and FF_VOLUME_STRS is
-/  not defined, a user defined volume string table needs to be defined as:
+/  not defined, a user defined volume string table is needed as:
 /
 /  const char* VolumeStr[FF_VOLUMES] = {"ram","flash","sd","usb",...
 */
@@ -190,7 +190,7 @@
 /  number and only an FAT volume found on the physical drive will be mounted.
 /  When this function is enabled (1), each logical drive number can be bound to
 /  arbitrary physical drive and partition listed in the VolToPart[]. Also f_fdisk()
-/  funciton will be available. */
+/  function will be available. */
 
 
 #define FF_MIN_SS		512
@@ -240,10 +240,10 @@
 #define FF_FS_NORTC		0
 #define FF_NORTC_MON	1
 #define FF_NORTC_MDAY	1
-#define FF_NORTC_YEAR	2020
-/* The option FF_FS_NORTC switches timestamp functiton. If the system does not have
-/  any RTC function or valid timestamp is not needed, set FF_FS_NORTC = 1 to disable
-/  the timestamp function. Every object modified by FatFs will have a fixed timestamp
+#define FF_NORTC_YEAR	2022
+/* The option FF_FS_NORTC switches timestamp feature. If the system does not have
+/  an RTC or valid timestamp is not needed, set FF_FS_NORTC = 1 to disable the
+/  timestamp feature. Every object modified by FatFs will have a fixed timestamp
 /  defined by FF_NORTC_MON, FF_NORTC_MDAY and FF_NORTC_YEAR in local time.
 /  To enable timestamp function (FF_FS_NORTC = 0), get_fattime() function need to be
 /  added to the project to read current time form real-time clock. FF_NORTC_MON,
@@ -253,7 +253,7 @@
 
 #define FF_FS_NOFSINFO	0
 /* If you need to know correct free space on the FAT32 volume, set bit 0 of this
-/  option, and f_getfree() function at first time after volume mount will force
+/  option, and f_getfree() function at the first time after volume mount will force
 /  a full FAT scan. Bit 1 controls the use of last allocated cluster number.
 /
 /  bit0=0: Use free cluster count in the FSINFO if available.
@@ -275,26 +275,21 @@
 /      lock control is independent of re-entrancy. */
 
 
-/* #include <somertos.h>	// O/S definitions */
 #define FF_FS_REENTRANT	0
 #define FF_FS_TIMEOUT	1000
-#define FF_SYNC_t		HANDLE
 /* The option FF_FS_REENTRANT switches the re-entrancy (thread safe) of the FatFs
 /  module itself. Note that regardless of this option, file access to different
 /  volume is always re-entrant and volume control functions, f_mount(), f_mkfs()
 /  and f_fdisk() function, are always not re-entrant. Only file/directory access
-/  to the same volume is under control of this function.
+/  to the same volume is under control of this featuer.
 /
-/   0: Disable re-entrancy. FF_FS_TIMEOUT and FF_SYNC_t have no effect.
+/   0: Disable re-entrancy. FF_FS_TIMEOUT have no effect.
 /   1: Enable re-entrancy. Also user provided synchronization handlers,
-/      ff_req_grant(), ff_rel_grant(), ff_del_syncobj() and ff_cre_syncobj()
-/      function, must be added to the project. Samples are available in
-/      option/syscall.c.
+/      ff_mutex_create(), ff_mutex_delete(), ff_mutex_take() and ff_mutex_give()
+/      function, must be added to the project. Samples are available in ffsystem.c.
 /
-/  The FF_FS_TIMEOUT defines timeout period in unit of time tick.
-/  The FF_SYNC_t defines O/S dependent sync object type. e.g. HANDLE, ID, OS_EVENT*,
-/  SemaphoreHandle_t and etc. A header file for O/S definitions needs to be
-/  included somewhere in the scope of ff.h. */
+/  The FF_FS_TIMEOUT defines timeout period in unit of O/S time tick.
+*/
 
 
 

stm-firmware/version.c

@@ -0,0 +1,27 @@
+/* Reflow Oven Controller
+ *
+ * Copyright (C) 2022  Mario Hüttel <mario.huettel@gmx.net>
+ *
+ * This file is part of the Reflow Oven Controller Project.
+ *
+ * The reflow oven controller is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The Reflow Oven Control Firmware is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the reflow oven controller project.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <reflow-controller/version.h>
+#include <generated-version/version.h>
+
+const char *version_git_version_string = GIT_VERSION_STRING;
+const char *version_git_full_commit_string = GIT_FULL_COMMIT;
+const char *version_compile_date = __DATE__;
+const char *version_compile_time = __TIME__;

temp-profile-checker/.gitignore

@@ -0,0 +1,2 @@
+*.o
+build/*

temp-profile-checker/CMakeLists.txt

@@ -0,0 +1,41 @@
+cmake_minimum_required(VERSION 3.8)
+project(tprcc LANGUAGES CXX)
+
+set (CMAKE_CXX_STANDARD 17)
+
+aux_source_directory("src" SRC_DIR)
+
+set (SRC_GENERATED "${CMAKE_CURRENT_BINARY_DIR}/tpr-parser.cpp" "${CMAKE_CURRENT_BINARY_DIR}/tpr-scanner.cpp")
+
+set (SOURCES
+	${SRC_DIR}
+	${SRC_GENERATED}
+)
+
+add_custom_command(
+	DEPENDS
+		${CMAKE_CURRENT_SOURCE_DIR}/parser/tpr.l
+	OUTPUT
+		${CMAKE_CURRENT_BINARY_DIR}/tpr-scanner.cpp
+	COMMAND
+		flex -+ -o "${CMAKE_CURRENT_BINARY_DIR}/tpr-scanner.cpp" "${CMAKE_CURRENT_SOURCE_DIR}/parser/tpr.l"
+)
+
+add_custom_command(
+	DEPENDS
+		${CMAKE_CURRENT_SOURCE_DIR}/parser/tpr.ypp
+	OUTPUT
+		${CMAKE_CURRENT_BINARY_DIR}/tpr-parser.cpp
+	COMMAND
+		mkdir -p "${CMAKE_CURRENT_BINARY_DIR}/generated" && bison -o"${CMAKE_CURRENT_BINARY_DIR}/tpr-parser.cpp" --header="${CMAKE_CURRENT_BINARY_DIR}/generated/tpr-parser.hpp" "${CMAKE_CURRENT_SOURCE_DIR}/parser/tpr.ypp"
+)	
+
+
+
+SET_SOURCE_FILES_PROPERTIES(${SRC_GENERATED} PROPERTIES GENERATED 1)
+add_executable(${PROJECT_NAME} ${SOURCES})
+
+target_include_directories(${PROJECT_NAME} PRIVATE "${CMAKE_CURRENT_BINARY_DIR}/generated")
+target_include_directories(${PROJECT_NAME} PRIVATE "${CMAKE_CURRENT_SOURCE_DIR}/include")
+# TEMPORARY FIx:
+target_include_directories(${PROJECT_NAME} PRIVATE "${CMAKE_CURRENT_BINARY_DIR}")

temp-profile-checker/include/tpr/tpr-scanner.hpp

@@ -0,0 +1,38 @@
+#ifndef _TPR_SCANNER_HPP_
+#define _TPR_SCANNER_HPP_
+
+
+#if ! defined(yyFlexLexerOnce)
+#include <FlexLexer.h>
+#endif
+
+#include "tpr-parser.hpp"
+#include "location.hh"
+
+namespace tpr {
+
+class TempProfileScanner : public yyFlexLexer{
+  public:
+
+    TempProfileScanner(std::istream *in) : yyFlexLexer(in) {
+    };
+    virtual ~TempProfileScanner() {};
+
+    //get rid of override virtual function warning
+    using FlexLexer::yylex;
+
+    virtual
+      int yylex( tpr::TempProfileParser::semantic_type * const lval, 
+          tpr::TempProfileParser::location_type *location );
+    // YY_DECL defined in mc_lexer.l
+    // Method body created by flex in mc_lexer.yy.cc
+
+  private:
+    /* yyval ptr */
+    tpr::TempProfileParser::semantic_type *yylval = nullptr;
+};
+
+} /* end namespace MC */
+
+
+#endif /* _TPR_SCANNER_HPP_ */

temp-profile-checker/parser/Makefile

@@ -1,43 +0,0 @@
-LEXER := flex
-YACC := bison
-CC := gcc
-
-YACC_FLAGS := -yd
-LEXER_FLAGS := 
-
-LANG_NAME := lang
-
-
-ifneq ($(VERBOSE),true)
-QUIET=@
-else
-QUIET=
-endif
-
-default: test
-
-y.tab.c: $(LANG_NAME).yacc
-	$(QUIET)echo "[$(YACC)] $@"
-	$(QUIET)$(YACC) $(YACC_FLAGS) $<
-	
-lex.yy.c: $(LANG_NAME).lex
-	$(QUIET)echo "[$(LEXER)] $@"
-	$(QUIET)$(LEXER) $^
-
-test: y.tab.c lex.yy.c
-	$(QUIET)echo "[CC] $@"
-	$(QUIET)$(CC) -o $@ $^
-	
-	
-
-.PHONY: clean run
-
-run: test
-	./test
-
-clean:
-	$(QUIET)echo "Clean up..."
-	$(QUIET)rm -f *.c *.o y.tab.h test
-
-
-

temp-profile-checker/parser/lang.lex

@@ -1,45 +0,0 @@
-%{
-#include <stdio.h>
-#include "y.tab.h"
-%}
-
-/*
-static const struct pl_command_list_map cmd_list_map[_PL_NUM_CMDS] = {
-	{PL_PID_CONF, "pid_conf", 6u},
-	{PL_SET_TEMP, "temp_set", 1u},
-	{PL_WAIT_FOR_TEMP, "wait_temp", 1u},
-	{PL_WAIT_FOR_TIME, "wait_time", 1u},
-	{PL_SET_RAMP, "temp_ramp", 2u},
-	{PL_LOUDSPEAKER_SET, "beep", 1u},
-	{PL_OFF, "temp_off", 0u},
-	{PL_CLEAR_FLAGS, "clear_flags", 0u},
-	{PL_DIGIO_CONF, "digio_conf", 2u},
-	{PL_DIGIO_SET, "digio_set", 2u},
-	{PL_DIGIO_WAIT, "digio_wait", 2u},
-};
-*/
-
-%option yylineno
-
-%%
-
-#[^\n]* return COMMENT;
-pid_conf return PL_PID_CONF;
-temp_set return PL_SET_TEMP;
-wait_temp return PL_WAIT_FOR_TEMP;
-wait_time return PL_WAIT_FOR_TIME;
-temp_ramp return PL_SET_RAMP;
-beep return PL_LOUDSPEAKER_SET;
-temp_off return PL_OFF;
-clear_flags return PL_CLEAR_FLAGS;
-digio_conf return PL_DIGIO_CONF;
-digio_set return PL_DIGIO_SET;
-digio_wait return PL_DIGIO_WAIT;
-[+-]?[0-9]+ yylval.int_value=atoi(yytext); return INT_NUMBER;
-[+-]?[0-9]+[.]?[0-9]* yylval.float_value=atof(yytext); return NUMBER;
-[ \t]+ /* Ignore whitespaces */;
-[\r]?\n return NEWLINE;
-
-[^\t\n #]+ return LITERAL;
-
-%%

temp-profile-checker/parser/lang.yacc

@@ -1,137 +0,0 @@
-%{
-#include <stdio.h>
-#include <string.h>
-
-extern int yylineno;
-extern int yylex();
-extern int yyparse();
-
-void yyerror(const char *str)
-{
-	fprintf(stderr, "Error: %s, line %d\n", str, yylineno);
-}
-
-int yywrap()
-{
-        return 1;
-} 
-  
-int main()
-{
-        yyparse();
-        return 0;
-} 
-
-%}
-
-%locations
-
-%token COMMENT PL_PID_CONF PL_SET_TEMP PL_WAIT_FOR_TEMP PL_WAIT_FOR_TIME PL_SET_RAMP PL_LOUDSPEAKER_SET PL_OFF PL_CLEAR_FLAGS PL_DIGIO_CONF PL_DIGIO_SET PL_DIGIO_WAIT NEWLINE LITERAL
-%token <float_value> NUMBER
-%token <int_value> INT_NUMBER
-
-%type <float_value> any_num
-
-%union
-{
-    int int_value;
-    float float_value;
-}
-
-%%
-
-program: /* empty */
-	| program command
-	| program NEWLINE
-	| program cmt_line
-	;
-
-command:
-	command_core NEWLINE
-	|
-	command_core cmt_line
-	;
-	
-command_core:
-	pid_conf | temp_set | wait_time | wait_temp | temp_ramp | beep | temp_off | clear_flags | digio_conf | digio_set | digio_wait;
-	
-pid_conf: PL_PID_CONF any_num any_num any_num any_num any_num any_num
-	{
-		printf("PID Config\n");
-	} 
-	;
-
-temp_set: PL_SET_TEMP any_num
-	{
-		printf("Target temp set: %f\n", $2);
-	}
-	;
-	
-wait_time: PL_WAIT_FOR_TIME any_num
-	{
-		printf("Wait for %f seconds\n", $2);
-	}
-	;
-
-wait_temp: PL_WAIT_FOR_TEMP any_num
-	{
-		printf("Wait for temperature %f\n", $2);
-	}
-	;
-	
-temp_ramp: PL_SET_RAMP any_num any_num
-	{
-		printf("Temperature ramp. Target %f, duration: %f\n", $2, $3);
-	}
-	;
-	
-cmt_line: COMMENT NEWLINE
-	{
-		printf("Comment line detected\n");
-	};
-	
-beep: PL_LOUDSPEAKER_SET INT_NUMBER
-	{
-		printf("Beep: %d\n", $2);
-	}
-	|
-	PL_LOUDSPEAKER_SET NUMBER
-	{
-		printf("Warning: Float value casted to int!\n");
-		printf("Beep %u\n", (unsigned int)$2);
-	};
-
-temp_off: PL_OFF
-	{
-		printf("Turn off oven\n");
-	}
-	;
-	
-clear_flags: PL_CLEAR_FLAGS
-	{
-		printf("Clear flags\n");
-	}
-	;
-
-digio_conf: PL_DIGIO_CONF INT_NUMBER INT_NUMBER
-	{
-		printf("Configure digio pin\n");
-	};
-	
-digio_set: PL_DIGIO_SET INT_NUMBER INT_NUMBER
-	{
-		printf("Configure digio pin\n");
-	};
-	
-digio_wait: PL_DIGIO_WAIT INT_NUMBER INT_NUMBER
-	{
-		printf("Configure digio pin\n");
-	};
-
-/* Matches any number format that can be interpreted as float */	
-any_num : NUMBER | INT_NUMBER
-	{
-		$$ = (float)$1;
-	};
-%%
-

temp-profile-checker/parser/tpr.l

@@ -0,0 +1,26 @@
+%{
+#include <tpr/tpr-scanner.hpp>
+#undef  YY_DECL
+#define YY_DECL int tpr::TempProfileScanner::yylex(tpr::TempProfileParser::semantic_type * const lval, tpr::TempProfileParser::location_type *loc )
+
+#define YY_USER_ACTION loc->step(); loc->columns(yyleng);
+
+%}
+
+%option yyclass="tpr::TempProgileScanner"
+%option noyywrap
+%option never-interactive
+%option c++
+
+/* Predefined rules */
+NEWLINE         "\n"|"\r\n"
+SPACE           " "|"\t"|"\f"
+COMMENT_BEGIN   "/*"
+COMMENT_END     "*/" 
+COMMENT_LINE  "//".*\n
+
+%%
+
+SPACE {return 0;}
+
+%%

temp-profile-checker/parser/tpr.ypp

@@ -0,0 +1,48 @@
+
+%language "c++"
+%require  "3.2"
+%defines 
+%define api.namespace {tpr}
+%define api.parser.class {TempProfileParser}
+
+%define parse.error verbose
+
+%code requires{
+  namespace tpr {
+    class TempProfileScanner;
+}
+}
+
+%parse-param { TempProfileScanner &scanner }
+
+%code {
+	#include <iostream>
+	#include <cstdlib>
+	#include <fstream>
+	#include <utility>
+	#include <tuple>
+	#include <tpr/tpr-scanner.hpp>
+	#undef yylex
+	#define yylex scanner.yylex
+}
+
+%define api.value.type variant
+%locations
+%start tpr_file
+
+%token foo
+
+%%
+
+tpr_file: foo
+	| tpr_file foo
+	;
+
+
+%%
+
+void tpr::TempProfileParser::error(const location_type &l, const std::string &err_message)
+{
+	std::cerr << "Error " << err_message << " at " << l << std::endl;
+	std::abort();
+}

temp-profile-checker/src/main.cpp

@@ -0,0 +1,8 @@
+#include <iostream>
+
+int main(int argc, char **argv)
+{
+	std::cout << "Hello world" << std::endl;
+
+	return 0;
+}