pcb
/
reflow-oven-control-pcb
1
0
Fork 0
Code Issues Pull Requests Releases 5 Wiki Activity
reflow-oven-control-pcb/reflow-oven-control-pcb.kic...

7795 lines
473 KiB
Plaintext
Raw Normal View History

Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(kicad_pcb (version 20171130) (host pcbnew 5.1.5)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(general
(thickness 1.6)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(drawings 42)
(tracks 1602)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(zones 0)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(modules 124)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(nets 134)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
)
(page A4)
(layers
(0 F.Cu signal)
(31 B.Cu signal)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
(32 B.Adhes user)
(33 F.Adhes user)
(34 B.Paste user)
(35 F.Paste user)
(36 B.SilkS user)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(37 F.SilkS user)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
(38 B.Mask user)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(39 F.Mask user)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
(40 Dwgs.User user)
(41 Cmts.User user)
(42 Eco1.User user)
(43 Eco2.User user)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(44 Edge.Cuts user)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
(45 Margin user)
(46 B.CrtYd user)
(47 F.CrtYd user)
Improve layout, change color of B.Silk and improve schematic
2020-01-12 14:56:58 +01:00
(48 B.Fab user)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(49 F.Fab user hide)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
)
(setup
Re-annotate components
2020-02-05 18:58:36 +01:00
(last_trace_width 0.25)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(user_trace_width 0.3)
(user_trace_width 0.4)
(user_trace_width 0.6)
(user_trace_width 1)
(user_trace_width 2)
(trace_clearance 0.2)
(zone_clearance 0.25)
(zone_45_only no)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(trace_min 0.21)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(via_size 0.5)
(via_drill 0.3)
(via_min_size 0.4)
(via_min_drill 0.3)
(user_via 0.9 0.5)
(uvia_size 0.3)
(uvia_drill 0.1)
(uvias_allowed no)
(uvia_min_size 0.2)
(uvia_min_drill 0.1)
(edge_width 0.05)
(segment_width 0.2)
(pcb_text_width 0.3)
(pcb_text_size 1.5 1.5)
(mod_edge_width 0.12)
(mod_text_size 1 1)
(mod_text_width 0.15)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(pad_size 0.7874 0.7874)
(pad_drill 0)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(pad_to_mask_clearance 0.051)
(solder_mask_min_width 0.25)
(aux_axis_origin 13 13)
(grid_origin 13 13)
(visible_elements FFFFFF7F)
(pcbplotparams
(layerselection 0x010fc_ffffffff)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(usegerberextensions true)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(usegerberattributes false)
(usegerberadvancedattributes false)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(creategerberjobfile true)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(excludeedgelayer true)
(linewidth 0.100000)
(plotframeref false)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(viasonmask true)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(mode 1)
(useauxorigin false)
(hpglpennumber 1)
(hpglpenspeed 20)
(hpglpendiameter 15.000000)
(psnegative false)
(psa4output false)
(plotreference true)
(plotvalue true)
(plotinvisibletext false)
(padsonsilk false)
(subtractmaskfromsilk false)
(outputformat 1)
(mirror false)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(drillshape 0)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(scaleselection 1)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(outputdirectory "gerber/"))
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
)
(net 0 "")
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(net 1 Earth)
(net 2 GND)
(net 3 +8V)
(net 4 +3V3)
Improved layout, Add QR code, Add external ADC option for 22 bit ADC
2019-12-26 18:01:55 +01:00
(net 5 +5V)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 6 /Controller/ENC1)
(net 7 /Controller/ENC2)
(net 8 /Controller/VREF)
(net 9 /Controller/SW1)
(net 10 /Frontend/FORCE+)
(net 11 /Frontend/FORCE-)
(net 12 /Frontend/SENS+)
(net 13 /Frontend/SENS-)
(net 14 /Controller/SDIO_D1)
(net 15 /Controller/SDIO_D0)
(net 16 /Controller/SDIO_CLK)
(net 17 /Controller/SDIO_CMD)
(net 18 /Controller/SDIO_D3)
(net 19 /Controller/SDIO_D2)
(net 20 "Net-(D102-Pad1)")
(net 21 /Controller/TEMP_IN)
(net 22 /L_Trafo)
(net 23 /L_IN)
(net 24 /N_IN)
(net 25 /DIGIO3)
(net 26 /DIGIO2)
(net 27 /DIGIO1)
(net 28 /DIGIO0)
(net 29 /Controller/SWDIO)
(net 30 /Controller/SWCLK)
(net 31 /Controller/PC_RX)
(net 32 /Controller/PC_TX)
(net 33 /Controller/~RST)
(net 34 "Net-(LS101-Pad1)")
(net 35 /Controller/LCD_VO)
(net 36 /Controller/LCD_RS)
(net 37 /Controller/LCD_EN)
(net 38 /Controller/LCD_D3)
(net 39 /Controller/LCD_D0)
(net 40 /Controller/LCD_D2)
(net 41 /Controller/LCD_D1)
(net 42 /Controller/FRONTEND_TEMP)
(net 43 /OUT0)
(net 44 /OUT3)
(net 45 /OUT2)
(net 46 /OUT1)
(net 47 /Controller/VDDA)
(net 48 +5VL)
(net 49 /Controller/CARD_DETECT)
(net 50 "Net-(C102-Pad2)")
(net 51 "Net-(C306-Pad1)")
(net 52 "Net-(C313-Pad1)")
(net 53 "Net-(D101-Pad4)")
(net 54 "Net-(D101-Pad2)")
(net 55 "Net-(D103-Pad1)")
(net 56 "Net-(F102-Pad2)")
(net 57 "Net-(J103-Pad1)")
(net 58 "Net-(Q101-Pad1)")
(net 59 +3.3VA)
(net 60 /Controller/NSS)
(net 61 /Controller/SCK)
(net 62 /Controller/MISO)
(net 63 "Net-(C206-Pad1)")
(net 64 "Net-(C207-Pad1)")
(net 65 "Net-(C211-Pad1)")
(net 66 "Net-(C212-Pad2)")
(net 67 "Net-(C213-Pad1)")
(net 68 "Net-(C303-Pad1)")
(net 69 "Net-(C304-Pad2)")
(net 70 "Net-(C304-Pad1)")
(net 71 "Net-(C305-Pad2)")
(net 72 "Net-(C305-Pad1)")
(net 73 "Net-(C308-Pad2)")
(net 74 "Net-(C308-Pad1)")
(net 75 "Net-(J202-Pad5)")
(net 76 "Net-(J202-Pad6)")
(net 77 "Net-(J202-Pad8)")
(net 78 "Net-(R311-Pad1)")
(net 79 "Net-(R314-Pad2)")
(net 80 "Net-(U201-Pad2)")
(net 81 "Net-(U201-Pad4)")
(net 82 "Net-(U201-Pad6)")
(net 83 "Net-(U201-Pad7)")
(net 84 "Net-(U201-Pad8)")
(net 85 "Net-(U201-Pad9)")
(net 86 "Net-(U201-Pad15)")
(net 87 "Net-(U201-Pad17)")
(net 88 "Net-(U202-Pad2)")
(net 89 "Net-(U202-Pad3)")
(net 90 "Net-(U202-Pad4)")
(net 91 "Net-(U202-Pad5)")
(net 92 "Net-(U202-Pad7)")
(net 93 "Net-(U202-Pad8)")
(net 94 "Net-(U202-Pad9)")
(net 95 "Net-(U202-Pad15)")
(net 96 "Net-(U202-Pad16)")
(net 97 "Net-(U202-Pad17)")
(net 98 "Net-(U202-Pad18)")
(net 99 "Net-(U202-Pad26)")
(net 100 "Net-(U202-Pad29)")
(net 101 "Net-(U202-Pad32)")
(net 102 "Net-(U202-Pad33)")
(net 103 "Net-(U202-Pad34)")
(net 104 "Net-(U202-Pad38)")
(net 105 "Net-(U202-Pad39)")
(net 106 "Net-(U202-Pad40)")
(net 107 "Net-(U202-Pad41)")
(net 108 "Net-(U202-Pad42)")
(net 109 "Net-(U202-Pad43)")
(net 110 "Net-(U202-Pad44)")
(net 111 "Net-(U202-Pad45)")
(net 112 "Net-(U202-Pad46)")
(net 113 "Net-(U202-Pad51)")
(net 114 "Net-(U202-Pad52)")
(net 115 "Net-(U202-Pad53)")
(net 116 "Net-(U202-Pad54)")
(net 117 "Net-(U202-Pad59)")
(net 118 "Net-(U202-Pad60)")
(net 119 "Net-(U202-Pad61)")
(net 120 "Net-(U202-Pad62)")
(net 121 "Net-(U202-Pad63)")
(net 122 "Net-(U202-Pad64)")
(net 123 "Net-(U202-Pad70)")
(net 124 "Net-(U202-Pad71)")
(net 125 "Net-(U202-Pad77)")
(net 126 "Net-(U202-Pad81)")
(net 127 "Net-(U202-Pad82)")
(net 128 "Net-(U202-Pad84)")
(net 129 "Net-(U202-Pad86)")
(net 130 "Net-(U202-Pad95)")
(net 131 "Net-(U202-Pad96)")
(net 132 "Net-(U202-Pad97)")
(net 133 "Net-(U202-Pad98)")
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(net_class Default "This is the default net class."
(clearance 0.2)
(trace_width 0.25)
(via_dia 0.5)
(via_drill 0.3)
(uvia_dia 0.3)
(uvia_drill 0.1)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(diff_pair_width 0.21)
(diff_pair_gap 0.25)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(add_net +3.3VA)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net +3V3)
(add_net +5V)
Improved layout, Add QR code, Add external ADC option for 22 bit ADC
2019-12-26 18:01:55 +01:00
(add_net +5VL)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net +8V)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(add_net /Controller/CARD_DETECT)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net /Controller/ENC1)
(add_net /Controller/ENC2)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(add_net /Controller/FRONTEND_TEMP)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net /Controller/LCD_D0)
(add_net /Controller/LCD_D1)
(add_net /Controller/LCD_D2)
(add_net /Controller/LCD_D3)
(add_net /Controller/LCD_EN)
(add_net /Controller/LCD_RS)
(add_net /Controller/LCD_VO)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(add_net /Controller/MISO)
(add_net /Controller/NSS)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net /Controller/PC_RX)
(add_net /Controller/PC_TX)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(add_net /Controller/SCK)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net /Controller/SDIO_CLK)
(add_net /Controller/SDIO_CMD)
(add_net /Controller/SDIO_D0)
(add_net /Controller/SDIO_D1)
(add_net /Controller/SDIO_D2)
(add_net /Controller/SDIO_D3)
(add_net /Controller/SW1)
(add_net /Controller/SWCLK)
(add_net /Controller/SWDIO)
(add_net /Controller/TEMP_IN)
Schematic beautify and layout improvments, Length matching for SDIO
2019-12-25 19:15:32 +01:00
(add_net /Controller/VDDA)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net /Controller/VREF)
(add_net /Controller/~RST)
(add_net /DIGIO0)
(add_net /DIGIO1)
(add_net /DIGIO2)
(add_net /DIGIO3)
(add_net /Frontend/FORCE+)
(add_net /Frontend/FORCE-)
(add_net /Frontend/SENS+)
(add_net /Frontend/SENS-)
Schematic beautify and layout improvments, Length matching for SDIO
2019-12-25 19:15:32 +01:00
(add_net /OUT0)
(add_net /OUT1)
(add_net /OUT2)
(add_net /OUT3)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net Earth)
(add_net GND)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(add_net "Net-(C102-Pad2)")
Re-annotate components
2020-02-05 18:58:36 +01:00
(add_net "Net-(C206-Pad1)")
(add_net "Net-(C207-Pad1)")
(add_net "Net-(C211-Pad1)")
(add_net "Net-(C212-Pad2)")
(add_net "Net-(C213-Pad1)")
(add_net "Net-(C303-Pad1)")
(add_net "Net-(C304-Pad1)")
(add_net "Net-(C304-Pad2)")
(add_net "Net-(C305-Pad1)")
(add_net "Net-(C305-Pad2)")
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(add_net "Net-(C306-Pad1)")
Re-annotate components
2020-02-05 18:58:36 +01:00
(add_net "Net-(C308-Pad1)")
(add_net "Net-(C308-Pad2)")
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(add_net "Net-(C313-Pad1)")
(add_net "Net-(D101-Pad2)")
(add_net "Net-(D101-Pad4)")
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net "Net-(D102-Pad1)")
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(add_net "Net-(D103-Pad1)")
(add_net "Net-(F102-Pad2)")
(add_net "Net-(J103-Pad1)")
Re-annotate components
2020-02-05 18:58:36 +01:00
(add_net "Net-(J202-Pad5)")
(add_net "Net-(J202-Pad6)")
(add_net "Net-(J202-Pad8)")
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net "Net-(LS101-Pad1)")
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(add_net "Net-(Q101-Pad1)")
Re-annotate components
2020-02-05 18:58:36 +01:00
(add_net "Net-(R311-Pad1)")
(add_net "Net-(R314-Pad2)")
(add_net "Net-(U201-Pad15)")
(add_net "Net-(U201-Pad17)")
(add_net "Net-(U201-Pad2)")
(add_net "Net-(U201-Pad4)")
(add_net "Net-(U201-Pad6)")
(add_net "Net-(U201-Pad7)")
(add_net "Net-(U201-Pad8)")
(add_net "Net-(U201-Pad9)")
(add_net "Net-(U202-Pad15)")
(add_net "Net-(U202-Pad16)")
(add_net "Net-(U202-Pad17)")
(add_net "Net-(U202-Pad18)")
(add_net "Net-(U202-Pad2)")
(add_net "Net-(U202-Pad26)")
(add_net "Net-(U202-Pad29)")
(add_net "Net-(U202-Pad3)")
(add_net "Net-(U202-Pad32)")
(add_net "Net-(U202-Pad33)")
(add_net "Net-(U202-Pad34)")
(add_net "Net-(U202-Pad38)")
(add_net "Net-(U202-Pad39)")
(add_net "Net-(U202-Pad4)")
(add_net "Net-(U202-Pad40)")
(add_net "Net-(U202-Pad41)")
(add_net "Net-(U202-Pad42)")
(add_net "Net-(U202-Pad43)")
(add_net "Net-(U202-Pad44)")
(add_net "Net-(U202-Pad45)")
(add_net "Net-(U202-Pad46)")
(add_net "Net-(U202-Pad5)")
(add_net "Net-(U202-Pad51)")
(add_net "Net-(U202-Pad52)")
(add_net "Net-(U202-Pad53)")
(add_net "Net-(U202-Pad54)")
(add_net "Net-(U202-Pad59)")
(add_net "Net-(U202-Pad60)")
(add_net "Net-(U202-Pad61)")
(add_net "Net-(U202-Pad62)")
(add_net "Net-(U202-Pad63)")
(add_net "Net-(U202-Pad64)")
(add_net "Net-(U202-Pad7)")
(add_net "Net-(U202-Pad70)")
(add_net "Net-(U202-Pad71)")
(add_net "Net-(U202-Pad77)")
(add_net "Net-(U202-Pad8)")
(add_net "Net-(U202-Pad81)")
(add_net "Net-(U202-Pad82)")
(add_net "Net-(U202-Pad84)")
(add_net "Net-(U202-Pad86)")
(add_net "Net-(U202-Pad9)")
(add_net "Net-(U202-Pad95)")
(add_net "Net-(U202-Pad96)")
(add_net "Net-(U202-Pad97)")
(add_net "Net-(U202-Pad98)")
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
)
(net_class HV ""
Finalize version v1.0
2020-01-03 21:26:29 +01:00
(clearance 2.55)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(trace_width 1)
(via_dia 0.5)
(via_drill 0.3)
(uvia_dia 0.3)
(uvia_drill 0.1)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(diff_pair_width 0.21)
(diff_pair_gap 0.25)
(add_net /L_IN)
(add_net /L_Trafo)
(add_net /N_IN)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Package_TO_SOT_SMD:SOT-23 (layer F.Cu) (tedit 5A02FF57) (tstamp 5E3C9052)
(at 116.45 74.27)
(descr "SOT-23, Standard")
(tags SOT-23)
(path /5D8C5188/5E5592F3)
Re-annotate components
2020-02-05 18:58:36 +01:00
(attr smd)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text reference U303 (at 0 -2.5) (layer F.SilkS)
Re-annotate components
2020-02-05 18:58:36 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value TL431LI-DBZ (at 0 2.5) (layer F.Fab)
Re-annotate components
2020-02-05 18:58:36 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_line (start 0.76 1.58) (end -0.7 1.58) (layer F.SilkS) (width 0.12))
(fp_line (start 0.76 -1.58) (end -1.4 -1.58) (layer F.SilkS) (width 0.12))
(fp_line (start -1.7 1.75) (end -1.7 -1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.7 1.75) (end -1.7 1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.7 -1.75) (end 1.7 1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.7 -1.75) (end 1.7 -1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start 0.76 -1.58) (end 0.76 -0.65) (layer F.SilkS) (width 0.12))
(fp_line (start 0.76 1.58) (end 0.76 0.65) (layer F.SilkS) (width 0.12))
(fp_line (start -0.7 1.52) (end 0.7 1.52) (layer F.Fab) (width 0.1))
(fp_line (start 0.7 -1.52) (end 0.7 1.52) (layer F.Fab) (width 0.1))
(fp_line (start -0.7 -0.95) (end -0.15 -1.52) (layer F.Fab) (width 0.1))
(fp_line (start -0.15 -1.52) (end 0.7 -1.52) (layer F.Fab) (width 0.1))
(fp_line (start -0.7 -0.95) (end -0.7 1.5) (layer F.Fab) (width 0.1))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.075)))
Re-annotate components
2020-02-05 18:58:36 +01:00
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 3 smd rect (at 1 0) (size 0.9 0.8) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 2 GND))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 2 smd rect (at -1 0.95) (size 0.9 0.8) (layers F.Cu F.Paste F.Mask)
(net 68 "Net-(C303-Pad1)"))
(pad 1 smd rect (at -1 -0.95) (size 0.9 0.8) (layers F.Cu F.Paste F.Mask)
(net 68 "Net-(C303-Pad1)"))
(model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl
Re-annotate components
2020-02-05 18:58:36 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Package_SO:TSSOP-14_4.4x5mm_P0.65mm (layer F.Cu) (tedit 5A02F25C) (tstamp 5E3C903D)
(at 109.75 75.32)
(descr "14-Lead Plastic Thin Shrink Small Outline (ST)-4.4 mm Body [TSSOP] (see Microchip Packaging Specification 00000049BS.pdf)")
(tags "SSOP 0.65")
(path /5D8C5188/5E3F0A96)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(attr smd)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text reference U301 (at 0 -3.55) (layer F.SilkS)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value MCP6V34 (at 0 3.55) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
(fp_line (start -2.325 -2.5) (end -3.675 -2.5) (layer F.SilkS) (width 0.15))
(fp_line (start -2.325 2.625) (end 2.325 2.625) (layer F.SilkS) (width 0.15))
(fp_line (start -2.325 -2.625) (end 2.325 -2.625) (layer F.SilkS) (width 0.15))
(fp_line (start -2.325 2.625) (end -2.325 2.4) (layer F.SilkS) (width 0.15))
(fp_line (start 2.325 2.625) (end 2.325 2.4) (layer F.SilkS) (width 0.15))
(fp_line (start 2.325 -2.625) (end 2.325 -2.4) (layer F.SilkS) (width 0.15))
(fp_line (start -2.325 -2.625) (end -2.325 -2.5) (layer F.SilkS) (width 0.15))
(fp_line (start -3.95 2.8) (end 3.95 2.8) (layer F.CrtYd) (width 0.05))
(fp_line (start -3.95 -2.8) (end 3.95 -2.8) (layer F.CrtYd) (width 0.05))
(fp_line (start 3.95 -2.8) (end 3.95 2.8) (layer F.CrtYd) (width 0.05))
(fp_line (start -3.95 -2.8) (end -3.95 2.8) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.2 -1.5) (end -1.2 -2.5) (layer F.Fab) (width 0.15))
(fp_line (start -2.2 2.5) (end -2.2 -1.5) (layer F.Fab) (width 0.15))
(fp_line (start 2.2 2.5) (end -2.2 2.5) (layer F.Fab) (width 0.15))
(fp_line (start 2.2 -2.5) (end 2.2 2.5) (layer F.Fab) (width 0.15))
(fp_line (start -1.2 -2.5) (end 2.2 -2.5) (layer F.Fab) (width 0.15))
(pad 14 smd rect (at 2.95 -1.95) (size 1.45 0.45) (layers F.Cu F.Paste F.Mask)
(net 72 "Net-(C305-Pad1)"))
(pad 13 smd rect (at 2.95 -1.3) (size 1.45 0.45) (layers F.Cu F.Paste F.Mask)
(net 71 "Net-(C305-Pad2)"))
(pad 12 smd rect (at 2.95 -0.65) (size 1.45 0.45) (layers F.Cu F.Paste F.Mask)
(net 12 /Frontend/SENS+))
(pad 11 smd rect (at 2.95 0) (size 1.45 0.45) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad 10 smd rect (at 2.95 0.65) (size 1.45 0.45) (layers F.Cu F.Paste F.Mask)
(net 13 /Frontend/SENS-))
(pad 9 smd rect (at 2.95 1.3) (size 1.45 0.45) (layers F.Cu F.Paste F.Mask)
(net 69 "Net-(C304-Pad2)"))
(pad 8 smd rect (at 2.95 1.95) (size 1.45 0.45) (layers F.Cu F.Paste F.Mask)
(net 70 "Net-(C304-Pad1)"))
(pad 7 smd rect (at -2.95 1.95) (size 1.45 0.45) (layers F.Cu F.Paste F.Mask)
(net 79 "Net-(R314-Pad2)"))
(pad 6 smd rect (at -2.95 1.3) (size 1.45 0.45) (layers F.Cu F.Paste F.Mask)
(net 78 "Net-(R311-Pad1)"))
(pad 5 smd rect (at -2.95 0.65) (size 1.45 0.45) (layers F.Cu F.Paste F.Mask)
(net 74 "Net-(C308-Pad1)"))
(pad 4 smd rect (at -2.95 0) (size 1.45 0.45) (layers F.Cu F.Paste F.Mask)
(net 59 +3.3VA))
(pad 3 smd rect (at -2.95 -0.65) (size 1.45 0.45) (layers F.Cu F.Paste F.Mask)
(net 51 "Net-(C306-Pad1)"))
(pad 2 smd rect (at -2.95 -1.3) (size 1.45 0.45) (layers F.Cu F.Paste F.Mask)
(net 11 /Frontend/FORCE-))
(pad 1 smd rect (at -2.95 -1.95) (size 1.45 0.45) (layers F.Cu F.Paste F.Mask)
(net 10 /Frontend/FORCE+))
(model ${KISYS3DMOD}/Package_SO.3dshapes/TSSOP-14_4.4x5mm_P0.65mm.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3C8D0C)
(at 120.91 78.27)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5D90BA7B)
(attr smd)
(fp_text reference R316 (at 0 -1.43) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value "1k 0.1%" (at 0 1.43) (layer F.Fab)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(net 11 /Frontend/FORCE-))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3C8CDB)
(at 124.92 80.78)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E3A5DAA)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(attr smd)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text reference R314 (at 0 -1.43) (layer F.SilkS)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value "5k 0.1%" (at 0 1.43) (layer F.Fab)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(effects (font (size 0.4 0.4) (thickness 0.06)))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 79 "Net-(R314-Pad2)"))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 78 "Net-(R311-Pad1)"))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3C8CAA)
(at 119.31 85.8)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(path /5D8C5188/5E381FD9)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(attr smd)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text reference R312 (at 0 -1.43) (layer F.SilkS)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value "1k 0.1%" (at 0 1.43) (layer F.Fab)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 78 "Net-(R311-Pad1)"))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 70 "Net-(C304-Pad1)"))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3C8C99)
(at 119.31 83.29)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E6BEB7A)
(attr smd)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text reference R311 (at 0 -1.43) (layer F.SilkS)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value DNP (at 0 1.43) (layer F.Fab)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text user %R (at 0 0) (layer F.Fab)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 73 "Net-(C308-Pad2)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 78 "Net-(R311-Pad1)"))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3C8C88)
(at 124.92 78.27)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(path /5D8C5188/5D947159)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(attr smd)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text reference R310 (at 0 -1.43) (layer F.SilkS)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value "1k 0.1%" (at 0 1.43) (layer F.Fab)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text user %R (at 0 0) (layer F.Fab)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 51 "Net-(C306-Pad1)"))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3C8C77)
(at 115.3 85.33)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E352DB6)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(attr smd)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text reference R309 (at 0 -1.43) (layer F.SilkS)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value "5k 0.1%" (at 0 1.43) (layer F.Fab)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text user %R (at 0 0) (layer F.Fab)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 74 "Net-(C308-Pad1)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3C8C46)
(at 124.92 75.76)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E333B2A)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(attr smd)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text reference R307 (at 0 -1.43) (layer F.SilkS)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value "1k 0.1%" (at 0 1.43) (layer F.Fab)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text user %R (at 0 0) (layer F.Fab)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 72 "Net-(C305-Pad1)"))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 74 "Net-(C308-Pad1)"))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3C8C35)
(at 120.91 80.78)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5D9371CC)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(attr smd)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text reference R306 (at 0 -1.43) (layer F.SilkS)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value "24k 0.1%" (at 0 1.43) (layer F.Fab)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 68 "Net-(C303-Pad1)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 51 "Net-(C306-Pad1)"))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3C8C24)
(at 112.89 79.9)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(path /5D8C5188/5E255618)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(attr smd)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text reference R305 (at 0 -1.43) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value "1k 0.1%" (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 71 "Net-(C305-Pad2)"))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 72 "Net-(C305-Pad1)"))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3C8C13)
(at 128.7 73.25)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E292BD1)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text reference R304 (at 0 -1.43) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value "1k 0.1%" (at 0 1.43) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(effects (font (size 0.4 0.4) (thickness 0.06)))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 69 "Net-(C304-Pad2)"))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 70 "Net-(C304-Pad1)"))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3C8C02)
(at 107.28 84.11)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5D929598)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text reference R303 (at 0 -1.43) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value 150 (at 0 1.43) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(effects (font (size 0.4 0.4) (thickness 0.06)))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 68 "Net-(C303-Pad1)"))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 59 +3.3VA))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3C8BF1)
(at 120.91 75.76)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E25723A)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text reference R302 (at 0 -1.43) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value "1k 0.1%" (at 0 1.43) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(effects (font (size 0.4 0.4) (thickness 0.06)))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(net 2 GND))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 71 "Net-(C305-Pad2)"))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3C8BE0)
(at 115.3 82.82)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E292BD7)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text reference R301 (at 0 -1.43) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value "1k 0.1%" (at 0 1.43) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(effects (font (size 0.4 0.4) (thickness 0.06)))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(net 2 GND))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 69 "Net-(C304-Pad2)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E3C8231)
(at 116.9 80.31)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5D910C4E)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text reference C309 (at 0 -1.43) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value 100n (at 0 1.43) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text user %R (at 0 0) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 59 +3.3VA))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E3C8220)
(at 124.69 73.25)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5E6BF72D)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text reference C308 (at 0 -1.43) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value DNP (at 0 1.43) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text user %R (at 0 0) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 73 "Net-(C308-Pad2)"))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 74 "Net-(C308-Pad1)"))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E3C81EF)
(at 116.9 77.8)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5D932D1C)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text reference C306 (at 0 -1.43) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value 1u (at 0 1.43) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(net 2 GND))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 51 "Net-(C306-Pad1)"))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E3C81DE)
(at 111.29 84.11)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5E232923)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text reference C305 (at 0 -1.43) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value 100n (at 0 1.43) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 71 "Net-(C305-Pad2)"))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 72 "Net-(C305-Pad1)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E3C81CD)
(at 120.68 73.25)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5E292BC1)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text reference C304 (at 0 -1.43) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value 100n (at 0 1.43) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text user %R (at 0 0) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 69 "Net-(C304-Pad2)"))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 70 "Net-(C304-Pad1)"))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Capacitor_SMD:C_1210_3225Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E3C81BC)
(at 108.08 80.75)
(descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5E55CA76)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text reference C303 (at 0 -2.28) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value 10u (at 0 2.28) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.8 0.8) (thickness 0.12)))
)
(fp_line (start 2.28 1.58) (end -2.28 1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 -1.58) (end 2.28 1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 -1.58) (end 2.28 -1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 1.58) (end -2.28 -1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.602064 1.36) (end 0.602064 1.36) (layer F.SilkS) (width 0.12))
(fp_line (start -0.602064 -1.36) (end 0.602064 -1.36) (layer F.SilkS) (width 0.12))
(fp_line (start 1.6 1.25) (end -1.6 1.25) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 -1.25) (end 1.6 1.25) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 -1.25) (end 1.6 -1.25) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 1.25) (end -1.6 -1.25) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 1.4 0) (size 1.25 2.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 2 GND))
(pad 1 smd roundrect (at -1.4 0) (size 1.25 2.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 68 "Net-(C303-Pad1)"))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E3C7F0B)
(at 137.5 73.25)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5E80AF62)
(attr smd)
(fp_text reference C112 (at 0 -1.43) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.43) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 59 +3.3VA))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E3B1D87)
(at 59.75 109.5 180)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5E82B184)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text reference C314 (at 0 -1.43) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value 2u2 (at 0 1.43) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(net 2 GND))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 52 "Net-(C313-Pad1)"))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm (layer F.Cu) (tedit 5A64803D) (tstamp 5E3C2274)
(at 50.75 50.75 180)
(descr "SMD Solder Jumper, 1x1.5mm Triangular Pads, 0.3mm gap, open")
(tags "solder jumper open")
(path /5D77EC9D/5E7247D0)
(attr virtual)
(fp_text reference JP201 (at 0.725 -1.775) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value LCD_5V_3V3 (at 0.725 1.925) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 3 1.25) (end -2.98 1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 3 1.25) (end 3 -1.27) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.98 -1.27) (end -2.98 1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.98 -1.27) (end 3 -1.27) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.75 -1) (end 2.75 -1) (layer F.SilkS) (width 0.12))
(fp_line (start 2.75 -1) (end 2.75 0.95) (layer F.SilkS) (width 0.12))
(fp_line (start 2.75 0.95) (end -2.75 0.95) (layer F.SilkS) (width 0.12))
(fp_line (start -2.75 0.95) (end -2.75 -1) (layer F.SilkS) (width 0.12))
(fp_line (start -1.4 1.2) (end -1.7 1.5) (layer F.SilkS) (width 0.12))
(fp_line (start -1.7 1.5) (end -1.1 1.5) (layer F.SilkS) (width 0.12))
(fp_line (start -1.1 1.5) (end -1.4 1.2) (layer F.SilkS) (width 0.12))
(pad 3 smd custom (at 2 0) (size 0.3 0.3) (layers F.Cu F.Mask)
(net 4 +3V3) (zone_connect 2)
(options (clearance outline) (anchor rect))
(primitives
(gr_poly (pts
(xy -0.5 -0.75) (xy 0.5 -0.75) (xy 1 0) (xy 0.5 0.75) (xy -0.5 0.75)
) (width 0))
))
(pad 2 smd custom (at 0 0 180) (size 0.3 0.3) (layers F.Cu)
(net 66 "Net-(C212-Pad2)") (zone_connect 2)
(options (clearance outline) (anchor rect))
(primitives
(gr_poly (pts
(xy -1.2 -0.75) (xy 1.2 -0.75) (xy 0.7 0) (xy 1.2 0.75) (xy -1.2 0.75)
(xy -0.7 0)) (width 0))
))
(pad 1 smd custom (at -2 0 180) (size 0.3 0.3) (layers F.Cu F.Mask)
(net 48 +5VL) (zone_connect 2)
(options (clearance outline) (anchor rect))
(primitives
(gr_poly (pts
(xy -0.5 -0.75) (xy 0.5 -0.75) (xy 1 0) (xy 0.5 0.75) (xy -0.5 0.75)
) (width 0))
))
(pad "" smd rect (at -1.2 0 180) (size 1.5 1.5) (layers F.Mask))
(pad "" smd rect (at 1.2 0 180) (size 1.5 1.5) (layers F.Mask))
)
(module Package_TO_SOT_SMD:SOT-223-3_TabPin2 (layer F.Cu) (tedit 5A02FF57) (tstamp 5E3BF082)
(at 72.75 76.25 270)
(descr "module CMS SOT223 4 pins")
(tags "CMS SOT")
(path /5E3EDECA)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text reference U105 (at 0 -4.5 90) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value AP1117-33 (at 0 4.5 90) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_line (start 1.85 -3.35) (end 1.85 3.35) (layer F.Fab) (width 0.1))
(fp_line (start -1.85 3.35) (end 1.85 3.35) (layer F.Fab) (width 0.1))
(fp_line (start -4.1 -3.41) (end 1.91 -3.41) (layer F.SilkS) (width 0.12))
(fp_line (start -0.85 -3.35) (end 1.85 -3.35) (layer F.Fab) (width 0.1))
(fp_line (start -1.85 3.41) (end 1.91 3.41) (layer F.SilkS) (width 0.12))
(fp_line (start -1.85 -2.35) (end -1.85 3.35) (layer F.Fab) (width 0.1))
(fp_line (start -1.85 -2.35) (end -0.85 -3.35) (layer F.Fab) (width 0.1))
(fp_line (start -4.4 -3.6) (end -4.4 3.6) (layer F.CrtYd) (width 0.05))
(fp_line (start -4.4 3.6) (end 4.4 3.6) (layer F.CrtYd) (width 0.05))
(fp_line (start 4.4 3.6) (end 4.4 -3.6) (layer F.CrtYd) (width 0.05))
(fp_line (start 4.4 -3.6) (end -4.4 -3.6) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.91 -3.41) (end 1.91 -2.15) (layer F.SilkS) (width 0.12))
(fp_line (start 1.91 3.41) (end 1.91 2.15) (layer F.SilkS) (width 0.12))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.8 0.8) (thickness 0.12)))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 1 smd rect (at -3.15 -2.3 270) (size 2 1.5) (layers F.Cu F.Paste F.Mask)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(net 2 GND))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 3 smd rect (at -3.15 2.3 270) (size 2 1.5) (layers F.Cu F.Paste F.Mask)
(net 5 +5V))
(pad 2 smd rect (at -3.15 0 270) (size 2 1.5) (layers F.Cu F.Paste F.Mask)
(net 59 +3.3VA))
(pad 2 smd rect (at 3.15 0 270) (size 2 3.8) (layers F.Cu F.Paste F.Mask)
(net 59 +3.3VA))
(model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-223.wrl
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3BECA8)
(at 59.75 106.5 180)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E696A10)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text reference R315 (at 0 -1.43) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value 0 (at 0 1.43) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text user %R (at 0 0) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 21 /Controller/TEMP_IN))
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 79 "Net-(R314-Pad2)"))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3BEC86)
(at 63 88 90)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E5C0B2B)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text reference R318 (at 0 -1.43 90) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value 2M (at 0 1.43 90) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(net 12 /Frontend/SENS+))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(net 13 /Frontend/SENS-))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E3BE0CC)
(at 64.5 88 90)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(path /5D8C5188/5E656F7C)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text reference C315 (at 0 -1.43 90) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value 22n (at 0 1.43 90) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 12 /Frontend/SENS+))
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 13 /Frontend/SENS-))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5E2E0EA8)
(at 54.75 98.5 90)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5E34D726)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text reference R214 (at 0 1.43 90) (layer B.SilkS)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value DNP (at 0 -1.43 90) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text user %R (at 0 0 90) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(net 2 GND))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 8 /Controller/VREF))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(module Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm (layer F.Cu) (tedit 5A64794F) (tstamp 5E102D21)
(at 30 18 270)
(descr "SMD Solder Jumper, 1x1.5mm Triangular Pads, 0.3mm gap, open")
(tags "solder jumper open")
(path /5E154E5C)
(attr virtual)
(fp_text reference JP104 (at 0 -1.8 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value EarthBridge (at 0 1.9 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.65 1.25) (end -1.65 1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.65 1.25) (end 1.65 -1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.65 -1.25) (end -1.65 1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.65 -1.25) (end 1.65 -1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.4 -1) (end 1.4 -1) (layer F.SilkS) (width 0.12))
(fp_line (start 1.4 -1) (end 1.4 1) (layer F.SilkS) (width 0.12))
(fp_line (start 1.4 1) (end -1.4 1) (layer F.SilkS) (width 0.12))
(fp_line (start -1.4 1) (end -1.4 -1) (layer F.SilkS) (width 0.12))
(pad 1 smd custom (at -0.725 0 270) (size 0.3 0.3) (layers F.Cu F.Mask)
(net 1 Earth) (zone_connect 2)
(options (clearance outline) (anchor rect))
(primitives
(gr_poly (pts
(xy -0.5 -0.75) (xy 0.5 -0.75) (xy 1 0) (xy 0.5 0.75) (xy -0.5 0.75)
) (width 0))
))
(pad 2 smd custom (at 0.725 0 270) (size 0.3 0.3) (layers F.Cu F.Mask)
(net 2 GND) (zone_connect 2)
(options (clearance outline) (anchor rect))
(primitives
(gr_poly (pts
(xy -0.65 -0.75) (xy 0.5 -0.75) (xy 0.5 0.75) (xy -0.65 0.75) (xy -0.15 0)
) (width 0))
))
)
(module Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm (layer F.Cu) (tedit 5A64794F) (tstamp 5E102D13)
(at 53 18 270)
(descr "SMD Solder Jumper, 1x1.5mm Triangular Pads, 0.3mm gap, open")
(tags "solder jumper open")
(path /5E154646)
(attr virtual)
(fp_text reference JP103 (at 0 -1.8 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value EarthBridge (at 0 1.9 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.65 1.25) (end -1.65 1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.65 1.25) (end 1.65 -1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.65 -1.25) (end -1.65 1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.65 -1.25) (end 1.65 -1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.4 -1) (end 1.4 -1) (layer F.SilkS) (width 0.12))
(fp_line (start 1.4 -1) (end 1.4 1) (layer F.SilkS) (width 0.12))
(fp_line (start 1.4 1) (end -1.4 1) (layer F.SilkS) (width 0.12))
(fp_line (start -1.4 1) (end -1.4 -1) (layer F.SilkS) (width 0.12))
(pad 1 smd custom (at -0.725 0 270) (size 0.3 0.3) (layers F.Cu F.Mask)
(net 1 Earth) (zone_connect 2)
(options (clearance outline) (anchor rect))
(primitives
(gr_poly (pts
(xy -0.5 -0.75) (xy 0.5 -0.75) (xy 1 0) (xy 0.5 0.75) (xy -0.5 0.75)
) (width 0))
))
(pad 2 smd custom (at 0.725 0 270) (size 0.3 0.3) (layers F.Cu F.Mask)
(net 2 GND) (zone_connect 2)
(options (clearance outline) (anchor rect))
(primitives
(gr_poly (pts
(xy -0.65 -0.75) (xy 0.5 -0.75) (xy 0.5 0.75) (xy -0.65 0.75) (xy -0.15 0)
) (width 0))
))
)
(module Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm (layer F.Cu) (tedit 5A64794F) (tstamp 5E102D05)
(at 33 110 90)
(descr "SMD Solder Jumper, 1x1.5mm Triangular Pads, 0.3mm gap, open")
(tags "solder jumper open")
(path /5E1491CF)
(attr virtual)
(fp_text reference JP102 (at 0 -1.8 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value EarthBridge (at 0 1.9 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.65 1.25) (end -1.65 1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.65 1.25) (end 1.65 -1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.65 -1.25) (end -1.65 1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.65 -1.25) (end 1.65 -1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.4 -1) (end 1.4 -1) (layer F.SilkS) (width 0.12))
(fp_line (start 1.4 -1) (end 1.4 1) (layer F.SilkS) (width 0.12))
(fp_line (start 1.4 1) (end -1.4 1) (layer F.SilkS) (width 0.12))
(fp_line (start -1.4 1) (end -1.4 -1) (layer F.SilkS) (width 0.12))
(pad 1 smd custom (at -0.725 0 90) (size 0.3 0.3) (layers F.Cu F.Mask)
(net 1 Earth) (zone_connect 2)
(options (clearance outline) (anchor rect))
(primitives
(gr_poly (pts
(xy -0.5 -0.75) (xy 0.5 -0.75) (xy 1 0) (xy 0.5 0.75) (xy -0.5 0.75)
) (width 0))
))
(pad 2 smd custom (at 0.725 0 90) (size 0.3 0.3) (layers F.Cu F.Mask)
(net 2 GND) (zone_connect 2)
(options (clearance outline) (anchor rect))
(primitives
(gr_poly (pts
(xy -0.65 -0.75) (xy 0.5 -0.75) (xy 0.5 0.75) (xy -0.65 0.75) (xy -0.15 0)
) (width 0))
))
)
Finalize version v1.0
2020-01-03 21:26:29 +01:00
(module Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm (layer B.Cu) (tedit 5A64794F) (tstamp 5E102CF7)
(at 95 96 180)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(descr "SMD Solder Jumper, 1x1.5mm Triangular Pads, 0.3mm gap, open")
(tags "solder jumper open")
(path /5E168E1A)
(attr virtual)
Finalize version v1.0
2020-01-03 21:26:29 +01:00
(fp_text reference JP101 (at 0 1.8) (layer B.SilkS)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
)
Finalize version v1.0
2020-01-03 21:26:29 +01:00
(fp_text value EarthBridge (at 0 -1.9) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
)
Finalize version v1.0
2020-01-03 21:26:29 +01:00
(fp_line (start 1.65 -1.25) (end -1.65 -1.25) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.65 -1.25) (end 1.65 1.25) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.65 1.25) (end -1.65 -1.25) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.65 1.25) (end 1.65 1.25) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.4 1) (end 1.4 1) (layer B.SilkS) (width 0.12))
(fp_line (start 1.4 1) (end 1.4 -1) (layer B.SilkS) (width 0.12))
(fp_line (start 1.4 -1) (end -1.4 -1) (layer B.SilkS) (width 0.12))
(fp_line (start -1.4 -1) (end -1.4 1) (layer B.SilkS) (width 0.12))
(pad 1 smd custom (at -0.725 0 180) (size 0.3 0.3) (layers B.Cu B.Mask)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(net 1 Earth) (zone_connect 2)
(options (clearance outline) (anchor rect))
(primitives
(gr_poly (pts
Finalize version v1.0
2020-01-03 21:26:29 +01:00
(xy -0.5 0.75) (xy 0.5 0.75) (xy 1 0) (xy 0.5 -0.75) (xy -0.5 -0.75)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
) (width 0))
))
Finalize version v1.0
2020-01-03 21:26:29 +01:00
(pad 2 smd custom (at 0.725 0 180) (size 0.3 0.3) (layers B.Cu B.Mask)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(net 2 GND) (zone_connect 2)
(options (clearance outline) (anchor rect))
(primitives
(gr_poly (pts
Finalize version v1.0
2020-01-03 21:26:29 +01:00
(xy -0.65 0.75) (xy 0.5 0.75) (xy 0.5 -0.75) (xy -0.65 -0.75) (xy -0.15 0)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
) (width 0))
))
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(module shimatta_smd:MCC-SDMICRO3-112J-TDAR-R01 (layer F.Cu) (tedit 5E0F7980) (tstamp 5DEF124A)
(at 28 67.5 270)
(path /5D77EC9D/5DB776DE)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference CON201 (at 13.5 -2.5 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
Improved layout, Add QR code, Add external ADC option for 22 bit ADC
2019-12-26 18:01:55 +01:00
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(fp_text value Micro_SD (at 7.25 -2.25 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(fp_line (start -0.4 14.5) (end -0.4 13.8) (layer F.Fab) (width 0.12))
(fp_line (start 13.8 1.5) (end 13.8 14.5) (layer F.Fab) (width 0.12))
(fp_line (start 12.4 1.5) (end 13.8 1.5) (layer F.Fab) (width 0.12))
(fp_line (start 12.4 1) (end 12.4 1.5) (layer F.Fab) (width 0.12))
(fp_line (start 13.8 1) (end 12.4 1) (layer F.Fab) (width 0.12))
(fp_line (start 13.8 0) (end 13.8 1) (layer F.Fab) (width 0.12))
(fp_line (start -0.7 0) (end 13.8 0) (layer F.Fab) (width 0.12))
(fp_line (start -0.7 13.8) (end -0.7 0) (layer F.Fab) (width 0.12))
(fp_line (start 7.7 13.8) (end -0.7 13.8) (layer F.Fab) (width 0.12))
(fp_line (start 9.5 14.5) (end 7.7 13.8) (layer F.Fab) (width 0.12))
(fp_line (start 13.8 14.5) (end 9.5 14.5) (layer F.Fab) (width 0.12))
(fp_text user Inserted (at 8.1 16.4 90) (layer F.Fab)
(effects (font (size 0.25 0.25) (thickness 0.05)))
)
(fp_line (start -0.4 15.5) (end -0.4 14.5) (layer F.Fab) (width 0.12))
(fp_line (start 0.8 16.7) (end 9.4 16.7) (layer F.Fab) (width 0.12))
(fp_arc (start 0.8 15.5) (end -0.4 15.5) (angle -90) (layer F.Fab) (width 0.12))
(fp_line (start 10.6 15.5) (end 10.6 14.5) (layer F.Fab) (width 0.12))
(fp_arc (start 9.4 15.5) (end 9.4 16.7) (angle -90) (layer F.Fab) (width 0.12))
(fp_text user Push-in (at 8.1 15.4 90) (layer F.Fab)
(effects (font (size 0.25 0.25) (thickness 0.05)))
)
(fp_line (start 0.8 15.7) (end 9.4 15.7) (layer F.Fab) (width 0.12))
(fp_arc (start 0.8 14.5) (end -0.4 14.5) (angle -90) (layer F.Fab) (width 0.12))
(fp_arc (start 9.4 14.5) (end 9.4 15.7) (angle -90) (layer F.Fab) (width 0.12))
(fp_line (start -2.25 14.5) (end -2.25 -1.5) (layer F.CrtYd) (width 0.15))
(fp_line (start 15.25 14.5) (end -2.25 14.5) (layer F.CrtYd) (width 0.15))
(fp_line (start 15.25 -1.5) (end 15.25 14.5) (layer F.CrtYd) (width 0.15))
(fp_line (start -2.25 -1.5) (end 15.25 -1.5) (layer F.CrtYd) (width 0.15))
(fp_line (start -0.4 2.75) (end -0.4 14.5) (layer F.SilkS) (width 0.15))
(fp_line (start 0.75 2.75) (end -0.4 2.75) (layer F.SilkS) (width 0.15))
(fp_line (start 10 2.75) (end 0.75 2.75) (layer F.SilkS) (width 0.15))
(fp_line (start 10 6.55) (end 10 2.75) (layer F.SilkS) (width 0.15))
(fp_line (start 10.6 7.1) (end 10 6.55) (layer F.SilkS) (width 0.15))
(fp_line (start 10.6 8.1) (end 10.6 7.1) (layer F.SilkS) (width 0.15))
(fp_line (start 10 8.55) (end 10.6 8.1) (layer F.SilkS) (width 0.15))
(fp_line (start 10.6 8.9) (end 10 8.55) (layer F.SilkS) (width 0.15))
(fp_line (start 10.6 14.5) (end 10.6 8.9) (layer F.SilkS) (width 0.15))
(fp_line (start -0.4 14.5) (end 10.6 14.5) (layer F.SilkS) (width 0.15))
(fp_line (start -2.25 14.5) (end -2.25 11.25) (layer F.SilkS) (width 0.15))
(fp_line (start 15.25 -1.5) (end 15.25 14.5) (layer F.SilkS) (width 0.15))
(fp_line (start -2.25 -1.5) (end 15.25 -1.5) (layer F.SilkS) (width 0.15))
(fp_line (start -2.25 -1.25) (end -2.25 -1.5) (layer F.SilkS) (width 0.15))
(fp_line (start -2.25 11.25) (end -2.25 -1.25) (layer F.SilkS) (width 0.15))
(fp_line (start 9.6 4) (end 9.6 6) (layer F.CrtYd) (width 0.15))
(fp_line (start 0.6 4) (end 9.6 4) (layer F.CrtYd) (width 0.15))
(fp_line (start 0.6 6) (end 0.6 4) (layer F.CrtYd) (width 0.15))
(fp_line (start 9.6 6) (end 0.6 6) (layer F.CrtYd) (width 0.15))
(pad 11 smd rect (at 14.3 10.1 270) (size 1.2 2.2) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad "" np_thru_hole circle (at 9.6 10.5 270) (size 1 1) (drill 1) (layers *.Cu *.Mask))
(pad "" np_thru_hole circle (at 1.6 10.5 270) (size 1 1) (drill 1) (layers *.Cu *.Mask))
(pad 12 smd rect (at -1.2 10.1 270) (size 1.2 2.2) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad 13 smd rect (at -1.2 0.5 270) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad 10 smd rect (at 13.4 0.5 270) (size 1.6 1.4) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad 1 smd rect (at 8.8 0 270) (size 0.7 1.6) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 19 /Controller/SDIO_D2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd rect (at 7.7 0 270) (size 0.7 1.6) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 18 /Controller/SDIO_D3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 smd rect (at 6.6 0 270) (size 0.7 1.6) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 17 /Controller/SDIO_CMD))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 4 smd rect (at 5.5 0 270) (size 0.7 1.6) (layers F.Cu F.Paste F.Mask)
(net 4 +3V3))
(pad 5 smd rect (at 4.4 0 270) (size 0.7 1.6) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 16 /Controller/SDIO_CLK))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 6 smd rect (at 3.3 0 270) (size 0.7 1.6) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad 7 smd rect (at 2.2 0 270) (size 0.7 1.6) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 15 /Controller/SDIO_D0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 8 smd rect (at 1.1 0 270) (size 0.7 1.6) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 14 /Controller/SDIO_D1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 9 smd rect (at 0 0 270) (size 0.7 1.6) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 49 /Controller/CARD_DETECT))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
(module proz_unknown:1271.1001 (layer F.Cu) (tedit 5C192637) (tstamp 5E0E4506)
(at 21 56 180)
(path /5E220866)
(fp_text reference FID102 (at 0.5 8) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value LightGuide (at 4.1 -2.5) (layer F.Fab) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -1.8 1.2) (end -1.8 -1.2) (layer F.CrtYd) (width 0.12))
(fp_line (start -6 1.2) (end -1.8 1.2) (layer F.CrtYd) (width 0.12))
(fp_line (start -6 -1.2) (end -6 1.2) (layer F.CrtYd) (width 0.12))
(fp_line (start -1.8 -1.2) (end -6 -1.2) (layer F.CrtYd) (width 0.12))
(fp_line (start -1.5 1.5) (end -1.5 -1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start 1.5 -1.5) (end 1.5 1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start -6.3 -1.5) (end -6.3 1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start 8.1 -1.5) (end -6.3 -1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start 8.1 1.5) (end 8.1 -1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start -6.3 1.5) (end 8.1 1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start -2.5 -1.5) (end 2.5 -1.5) (layer F.SilkS) (width 0.15))
(fp_line (start -2.5 1.5) (end 2.5 1.5) (layer F.SilkS) (width 0.15))
(pad "" np_thru_hole circle (at 0 0 180) (size 2.3 2.3) (drill 2.3) (layers *.Cu *.Mask))
)
(module Package_QFP:LQFP-100_14x14mm_P0.5mm (layer F.Cu) (tedit 5C1956D1) (tstamp 5DEF18B5)
(at 48.5 94 90)
(descr "LQFP, 100 Pin (https://www.nxp.com/docs/en/package-information/SOT407-1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py")
(tags "LQFP QFP")
(path /5D77EC9D/5D78060E)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference U202 (at 0 -9.42 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value STM32F407VETx (at 0 9.42 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 6.41 7.11) (end 7.11 7.11) (layer F.SilkS) (width 0.12))
(fp_line (start 7.11 7.11) (end 7.11 6.41) (layer F.SilkS) (width 0.12))
(fp_line (start -6.41 7.11) (end -7.11 7.11) (layer F.SilkS) (width 0.12))
(fp_line (start -7.11 7.11) (end -7.11 6.41) (layer F.SilkS) (width 0.12))
(fp_line (start 6.41 -7.11) (end 7.11 -7.11) (layer F.SilkS) (width 0.12))
(fp_line (start 7.11 -7.11) (end 7.11 -6.41) (layer F.SilkS) (width 0.12))
(fp_line (start -6.41 -7.11) (end -7.11 -7.11) (layer F.SilkS) (width 0.12))
(fp_line (start -7.11 -7.11) (end -7.11 -6.41) (layer F.SilkS) (width 0.12))
(fp_line (start -7.11 -6.41) (end -8.475 -6.41) (layer F.SilkS) (width 0.12))
(fp_line (start -6 -7) (end 7 -7) (layer F.Fab) (width 0.1))
(fp_line (start 7 -7) (end 7 7) (layer F.Fab) (width 0.1))
(fp_line (start 7 7) (end -7 7) (layer F.Fab) (width 0.1))
(fp_line (start -7 7) (end -7 -6) (layer F.Fab) (width 0.1))
(fp_line (start -7 -6) (end -6 -7) (layer F.Fab) (width 0.1))
(fp_line (start 0 -8.72) (end -6.4 -8.72) (layer F.CrtYd) (width 0.05))
(fp_line (start -6.4 -8.72) (end -6.4 -7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -6.4 -7.25) (end -7.25 -7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -7.25 -7.25) (end -7.25 -6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start -7.25 -6.4) (end -8.72 -6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start -8.72 -6.4) (end -8.72 0) (layer F.CrtYd) (width 0.05))
(fp_line (start 0 -8.72) (end 6.4 -8.72) (layer F.CrtYd) (width 0.05))
(fp_line (start 6.4 -8.72) (end 6.4 -7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 6.4 -7.25) (end 7.25 -7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 7.25 -7.25) (end 7.25 -6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start 7.25 -6.4) (end 8.72 -6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start 8.72 -6.4) (end 8.72 0) (layer F.CrtYd) (width 0.05))
(fp_line (start 0 8.72) (end -6.4 8.72) (layer F.CrtYd) (width 0.05))
(fp_line (start -6.4 8.72) (end -6.4 7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -6.4 7.25) (end -7.25 7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -7.25 7.25) (end -7.25 6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start -7.25 6.4) (end -8.72 6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start -8.72 6.4) (end -8.72 0) (layer F.CrtYd) (width 0.05))
(fp_line (start 0 8.72) (end 6.4 8.72) (layer F.CrtYd) (width 0.05))
(fp_line (start 6.4 8.72) (end 6.4 7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 6.4 7.25) (end 7.25 7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 7.25 7.25) (end 7.25 6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start 7.25 6.4) (end 8.72 6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start 8.72 6.4) (end 8.72 0) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 smd roundrect (at -7.675 -6 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 60 /Controller/NSS))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at -7.675 -5.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 88 "Net-(U202-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 smd roundrect (at -7.675 -5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 89 "Net-(U202-Pad3)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 4 smd roundrect (at -7.675 -4.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 90 "Net-(U202-Pad4)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 5 smd roundrect (at -7.675 -4 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 91 "Net-(U202-Pad5)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 6 smd roundrect (at -7.675 -3.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 7 smd roundrect (at -7.675 -3 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 92 "Net-(U202-Pad7)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 8 smd roundrect (at -7.675 -2.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 93 "Net-(U202-Pad8)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 9 smd roundrect (at -7.675 -2 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 94 "Net-(U202-Pad9)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 10 smd roundrect (at -7.675 -1.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 11 smd roundrect (at -7.675 -1 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 12 smd roundrect (at -7.675 -0.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 63 "Net-(C206-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 13 smd roundrect (at -7.675 0 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 64 "Net-(C207-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 14 smd roundrect (at -7.675 0.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 33 /Controller/~RST))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 15 smd roundrect (at -7.675 1 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 95 "Net-(U202-Pad15)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 16 smd roundrect (at -7.675 1.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 96 "Net-(U202-Pad16)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 17 smd roundrect (at -7.675 2 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 97 "Net-(U202-Pad17)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 18 smd roundrect (at -7.675 2.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 98 "Net-(U202-Pad18)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 19 smd roundrect (at -7.675 3 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 20 smd roundrect (at -7.675 3.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 21 smd roundrect (at -7.675 4 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 8 /Controller/VREF))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 22 smd roundrect (at -7.675 4.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 47 /Controller/VDDA))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 23 smd roundrect (at -7.675 5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 6 /Controller/ENC1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 24 smd roundrect (at -7.675 5.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 7 /Controller/ENC2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 25 smd roundrect (at -7.675 6 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 21 /Controller/TEMP_IN))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 26 smd roundrect (at -6 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 99 "Net-(U202-Pad26)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 27 smd roundrect (at -5.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 28 smd roundrect (at -5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 29 smd roundrect (at -4.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 100 "Net-(U202-Pad29)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 30 smd roundrect (at -4 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 61 /Controller/SCK))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 31 smd roundrect (at -3.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 62 /Controller/MISO))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 32 smd roundrect (at -3 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 101 "Net-(U202-Pad32)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 33 smd roundrect (at -2.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 102 "Net-(U202-Pad33)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 34 smd roundrect (at -2 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 103 "Net-(U202-Pad34)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 35 smd roundrect (at -1.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 43 /OUT0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 36 smd roundrect (at -1 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 46 /OUT1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 37 smd roundrect (at -0.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 45 /OUT2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 38 smd roundrect (at 0 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 104 "Net-(U202-Pad38)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 39 smd roundrect (at 0.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 105 "Net-(U202-Pad39)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 40 smd roundrect (at 1 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 106 "Net-(U202-Pad40)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 41 smd roundrect (at 1.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 107 "Net-(U202-Pad41)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 42 smd roundrect (at 2 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 108 "Net-(U202-Pad42)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 43 smd roundrect (at 2.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 109 "Net-(U202-Pad43)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 44 smd roundrect (at 3 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 110 "Net-(U202-Pad44)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 45 smd roundrect (at 3.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 111 "Net-(U202-Pad45)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 46 smd roundrect (at 4 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 112 "Net-(U202-Pad46)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 47 smd roundrect (at 4.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 42 /Controller/FRONTEND_TEMP))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 48 smd roundrect (at 5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 42 /Controller/FRONTEND_TEMP))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 49 smd roundrect (at 5.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 65 "Net-(C211-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 50 smd roundrect (at 6 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 51 smd roundrect (at 7.675 6 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 113 "Net-(U202-Pad51)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 52 smd roundrect (at 7.675 5.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 114 "Net-(U202-Pad52)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 53 smd roundrect (at 7.675 5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 115 "Net-(U202-Pad53)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 54 smd roundrect (at 7.675 4.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 116 "Net-(U202-Pad54)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 55 smd roundrect (at 7.675 4 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 82 "Net-(U201-Pad6)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 56 smd roundrect (at 7.675 3.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 84 "Net-(U201-Pad8)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 57 smd roundrect (at 7.675 3 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 87 "Net-(U201-Pad17)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 58 smd roundrect (at 7.675 2.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 86 "Net-(U201-Pad15)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 59 smd roundrect (at 7.675 2 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 117 "Net-(U202-Pad59)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 60 smd roundrect (at 7.675 1.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 118 "Net-(U202-Pad60)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 61 smd roundrect (at 7.675 1 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 119 "Net-(U202-Pad61)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 62 smd roundrect (at 7.675 0.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 120 "Net-(U202-Pad62)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 63 smd roundrect (at 7.675 0 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 121 "Net-(U202-Pad63)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 64 smd roundrect (at 7.675 -0.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 122 "Net-(U202-Pad64)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 65 smd roundrect (at 7.675 -1 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 15 /Controller/SDIO_D0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 66 smd roundrect (at 7.675 -1.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 14 /Controller/SDIO_D1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 67 smd roundrect (at 7.675 -2 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 49 /Controller/CARD_DETECT))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 68 smd roundrect (at 7.675 -2.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 31 /Controller/PC_RX))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 69 smd roundrect (at 7.675 -3 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 32 /Controller/PC_TX))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 70 smd roundrect (at 7.675 -3.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 123 "Net-(U202-Pad70)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 71 smd roundrect (at 7.675 -4 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 124 "Net-(U202-Pad71)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 72 smd roundrect (at 7.675 -4.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 29 /Controller/SWDIO))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 73 smd roundrect (at 7.675 -5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 67 "Net-(C213-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 74 smd roundrect (at 7.675 -5.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 75 smd roundrect (at 7.675 -6 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 76 smd roundrect (at 6 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 30 /Controller/SWCLK))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 77 smd roundrect (at 5.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 125 "Net-(U202-Pad77)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 78 smd roundrect (at 5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 19 /Controller/SDIO_D2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 79 smd roundrect (at 4.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 18 /Controller/SDIO_D3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 80 smd roundrect (at 4 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 16 /Controller/SDIO_CLK))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 81 smd roundrect (at 3.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 126 "Net-(U202-Pad81)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 82 smd roundrect (at 3 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 127 "Net-(U202-Pad82)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 83 smd roundrect (at 2.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 17 /Controller/SDIO_CMD))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 84 smd roundrect (at 2 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 128 "Net-(U202-Pad84)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 85 smd roundrect (at 1.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 9 /Controller/SW1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 86 smd roundrect (at 1 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 129 "Net-(U202-Pad86)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 87 smd roundrect (at 0.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 80 "Net-(U201-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 88 smd roundrect (at 0 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 81 "Net-(U201-Pad4)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 89 smd roundrect (at -0.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 44 /OUT3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 90 smd roundrect (at -1 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 28 /DIGIO0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 91 smd roundrect (at -1.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 27 /DIGIO1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 92 smd roundrect (at -2 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 26 /DIGIO2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 93 smd roundrect (at -2.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 25 /DIGIO3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 94 smd roundrect (at -3 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 95 smd roundrect (at -3.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 130 "Net-(U202-Pad95)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 96 smd roundrect (at -4 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 131 "Net-(U202-Pad96)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 97 smd roundrect (at -4.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 132 "Net-(U202-Pad97)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 98 smd roundrect (at -5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 133 "Net-(U202-Pad98)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 99 smd roundrect (at -5.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 100 smd roundrect (at -6 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(model ${KISYS3DMOD}/Package_QFP.3dshapes/LQFP-100_14x14mm_P0.5mm.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Connector_Multicomp:Multicomp_MC9A12-1034_2x05_P2.54mm_Vertical (layer F.Cu) (tedit 5E0DF17F) (tstamp 5E016EF0)
(at 62.5 61 180)
(descr http://www.farnell.com/datasheets/1520732.pdf)
(tags "connector multicomp MC9A MC9A12")
(path /5D77EC9D/5E102471)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference J201 (at 5.5 4 180) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value LCD (at 5.08 5 180) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 5.08 -1.27 180) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -5.07 3.2) (end -5.07 -5.74) (layer F.SilkS) (width 0.15))
(fp_line (start -5.07 -5.74) (end 15.23 -5.74) (layer F.SilkS) (width 0.15))
(fp_line (start 15.23 -5.74) (end 15.23 3.2) (layer F.SilkS) (width 0.15))
(fp_line (start 15.23 3.2) (end -5.07 3.2) (layer F.SilkS) (width 0.15))
(fp_line (start 2.855 3.2) (end 2.855 1.9) (layer F.SilkS) (width 0.15))
(fp_line (start 2.855 1.9) (end -3.87 1.9) (layer F.SilkS) (width 0.15))
(fp_line (start -3.87 1.9) (end -3.87 -4.44) (layer F.SilkS) (width 0.15))
(fp_line (start -3.87 -4.44) (end 14.03 -4.44) (layer F.SilkS) (width 0.15))
(fp_line (start 14.03 -4.44) (end 14.03 1.9) (layer F.SilkS) (width 0.15))
(fp_line (start 14.03 1.9) (end 7.305 1.9) (layer F.SilkS) (width 0.15))
(fp_line (start 7.305 1.9) (end 7.305 3.2) (layer F.SilkS) (width 0.15))
(fp_line (start 4.83 -5.74) (end 4.83 -5.94) (layer F.SilkS) (width 0.15))
(fp_line (start 4.83 -5.94) (end 5.33 -5.94) (layer F.SilkS) (width 0.15))
(fp_line (start 5.33 -5.94) (end 5.33 -5.74) (layer F.SilkS) (width 0.15))
(fp_line (start 4.83 -5.84) (end 5.33 -5.84) (layer F.SilkS) (width 0.15))
(fp_line (start 12.31 -5.74) (end 12.31 -5.94) (layer F.SilkS) (width 0.15))
(fp_line (start 12.31 -5.94) (end 12.81 -5.94) (layer F.SilkS) (width 0.15))
(fp_line (start 12.81 -5.94) (end 12.81 -5.74) (layer F.SilkS) (width 0.15))
(fp_line (start 12.31 -5.84) (end 12.81 -5.84) (layer F.SilkS) (width 0.15))
(fp_line (start -2.65 -5.74) (end -2.65 -5.94) (layer F.SilkS) (width 0.15))
(fp_line (start -2.65 -5.94) (end -2.15 -5.94) (layer F.SilkS) (width 0.15))
(fp_line (start -2.15 -5.94) (end -2.15 -5.74) (layer F.SilkS) (width 0.15))
(fp_line (start -2.65 -5.84) (end -2.15 -5.84) (layer F.SilkS) (width 0.15))
(fp_line (start -2.2 0.6) (end -2.2 -0.6) (layer F.SilkS) (width 0.15))
(fp_line (start -2.2 -0.6) (end -1.6 0) (layer F.SilkS) (width 0.15))
(fp_line (start -1.6 0) (end -2.2 0.6) (layer F.SilkS) (width 0.15))
(fp_line (start -5.55 3.7) (end -5.55 -6.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -5.55 -6.25) (end 15.75 -6.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 15.75 -6.25) (end 15.75 3.7) (layer F.CrtYd) (width 0.05))
(fp_line (start 15.75 3.7) (end -5.55 3.7) (layer F.CrtYd) (width 0.05))
(pad 1 thru_hole rect (at 0 0 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(pad 2 thru_hole circle (at 0 -2.54 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(pad 3 thru_hole circle (at 2.54 0 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 66 "Net-(C212-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 4 thru_hole circle (at 2.54 -2.54 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 36 /Controller/LCD_RS))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 5 thru_hole circle (at 5.08 0 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 35 /Controller/LCD_VO))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 6 thru_hole circle (at 5.08 -2.54 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 37 /Controller/LCD_EN))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 7 thru_hole circle (at 7.62 0 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 38 /Controller/LCD_D3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 8 thru_hole circle (at 7.62 -2.54 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 39 /Controller/LCD_D0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 9 thru_hole circle (at 10.16 0 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 40 /Controller/LCD_D2))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 10 thru_hole circle (at 10.16 -2.54 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 41 /Controller/LCD_D1))
(model ${KISYS3DMOD}/Connector_Multicomp.3dshapes/Multicomp_MC9A12-1034_2x05_P2.54mm_Vertical.wrl
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(model ${SHIMATTA_DIR}/footprints/packages3d/tht.shapes3d/Pin_Header_Socket_2x05.x3d
(offset (xyz 5.08 1.27 0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF174C)
(at 59.75 108 180)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(path /5D8C5188/5DB0C2DA)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(attr smd)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text reference R317 (at 0 -1.43 180) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value 250 (at 0 1.43 180) (layer F.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text user %R (at 0 0 180) (layer F.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(net 52 "Net-(C313-Pad1)"))
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 21 /Controller/TEMP_IN))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module shimatta_tht:BV-EI-303-2010 (layer F.Cu) (tedit 5E092AF7) (tstamp 5DEF178F)
(at 70 35.5 180)
(path /5D6EA3F7)
(fp_text reference T101 (at 12 17.5 180) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 230VAC/6VAC (at 0 -0.5 180) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 13.9 -16.4) (end 13.9 16.4) (layer F.SilkS) (width 0.15))
(fp_line (start -13.9 16.4) (end 13.9 16.4) (layer F.SilkS) (width 0.15))
(fp_line (start -13.9 -16.4) (end -13.9 16.4) (layer F.SilkS) (width 0.15))
(fp_line (start -13.9 -16.4) (end 13.9 -16.4) (layer F.SilkS) (width 0.15))
(pad 4 thru_hole circle (at 10 -5 180) (size 2 2) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 54 "Net-(D101-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 thru_hole circle (at 10 5 180) (size 2 2) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 56 "Net-(F102-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 thru_hole circle (at -10 -10 180) (size 2 2) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 22 /L_Trafo))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 thru_hole circle (at -10 10 180) (size 2 2) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 24 /N_IN))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
(module Capacitor_SMD:C_1206_3216Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF0E11)
(at 26.5 20.5 90)
(descr "Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D708E87)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C113 (at 0 -1.82 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n/1kV (at 0 1.82 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.8 0.8) (thickness 0.12)))
)
(fp_line (start 2.28 1.12) (end -2.28 1.12) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 -1.12) (end 2.28 1.12) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 -1.12) (end 2.28 -1.12) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 1.12) (end -2.28 -1.12) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12))
(fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12))
(fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 1.4 0 90) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 1 Earth))
(pad 1 smd roundrect (at -1.4 0 90) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_1206_3216Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_1206_3216Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF0E22)
(at 85.5 102.5)
(descr "Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D707F91)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C114 (at 0 -1.82) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n/1kV (at 0 1.82) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1))
(fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12))
(fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12))
(fp_line (start -2.28 1.12) (end -2.28 -1.12) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 -1.12) (end 2.28 -1.12) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 -1.12) (end 2.28 1.12) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 1.12) (end -2.28 1.12) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.8 0.8) (thickness 0.12)))
)
(pad 1 smd roundrect (at -1.4 0) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 2 GND))
(pad 2 smd roundrect (at 1.4 0) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 1 Earth))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_1206_3216Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_THT:CP_Radial_D8.0mm_P3.50mm (layer F.Cu) (tedit 5AE50EF0) (tstamp 5DEF0ECB)
(at 37 40 90)
(descr "CP, Radial series, Radial, pin pitch=3.50mm, , diameter=8mm, Electrolytic Capacitor")
(tags "CP Radial series Radial pin pitch 3.50mm diameter 8mm Electrolytic Capacitor")
(path /5D7133CA)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference C104 (at 1.75 -5.25 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 470u (at 1.75 5.25 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 1.75 0 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -2.259698 -2.715) (end -2.259698 -1.915) (layer F.SilkS) (width 0.12))
(fp_line (start -2.659698 -2.315) (end -1.859698 -2.315) (layer F.SilkS) (width 0.12))
(fp_line (start 5.831 -0.533) (end 5.831 0.533) (layer F.SilkS) (width 0.12))
(fp_line (start 5.791 -0.768) (end 5.791 0.768) (layer F.SilkS) (width 0.12))
(fp_line (start 5.751 -0.948) (end 5.751 0.948) (layer F.SilkS) (width 0.12))
(fp_line (start 5.711 -1.098) (end 5.711 1.098) (layer F.SilkS) (width 0.12))
(fp_line (start 5.671 -1.229) (end 5.671 1.229) (layer F.SilkS) (width 0.12))
(fp_line (start 5.631 -1.346) (end 5.631 1.346) (layer F.SilkS) (width 0.12))
(fp_line (start 5.591 -1.453) (end 5.591 1.453) (layer F.SilkS) (width 0.12))
(fp_line (start 5.551 -1.552) (end 5.551 1.552) (layer F.SilkS) (width 0.12))
(fp_line (start 5.511 -1.645) (end 5.511 1.645) (layer F.SilkS) (width 0.12))
(fp_line (start 5.471 -1.731) (end 5.471 1.731) (layer F.SilkS) (width 0.12))
(fp_line (start 5.431 -1.813) (end 5.431 1.813) (layer F.SilkS) (width 0.12))
(fp_line (start 5.391 -1.89) (end 5.391 1.89) (layer F.SilkS) (width 0.12))
(fp_line (start 5.351 -1.964) (end 5.351 1.964) (layer F.SilkS) (width 0.12))
(fp_line (start 5.311 -2.034) (end 5.311 2.034) (layer F.SilkS) (width 0.12))
(fp_line (start 5.271 -2.102) (end 5.271 2.102) (layer F.SilkS) (width 0.12))
(fp_line (start 5.231 -2.166) (end 5.231 2.166) (layer F.SilkS) (width 0.12))
(fp_line (start 5.191 -2.228) (end 5.191 2.228) (layer F.SilkS) (width 0.12))
(fp_line (start 5.151 -2.287) (end 5.151 2.287) (layer F.SilkS) (width 0.12))
(fp_line (start 5.111 -2.345) (end 5.111 2.345) (layer F.SilkS) (width 0.12))
(fp_line (start 5.071 -2.4) (end 5.071 2.4) (layer F.SilkS) (width 0.12))
(fp_line (start 5.031 -2.454) (end 5.031 2.454) (layer F.SilkS) (width 0.12))
(fp_line (start 4.991 -2.505) (end 4.991 2.505) (layer F.SilkS) (width 0.12))
(fp_line (start 4.951 -2.556) (end 4.951 2.556) (layer F.SilkS) (width 0.12))
(fp_line (start 4.911 -2.604) (end 4.911 2.604) (layer F.SilkS) (width 0.12))
(fp_line (start 4.871 -2.651) (end 4.871 2.651) (layer F.SilkS) (width 0.12))
(fp_line (start 4.831 -2.697) (end 4.831 2.697) (layer F.SilkS) (width 0.12))
(fp_line (start 4.791 -2.741) (end 4.791 2.741) (layer F.SilkS) (width 0.12))
(fp_line (start 4.751 -2.784) (end 4.751 2.784) (layer F.SilkS) (width 0.12))
(fp_line (start 4.711 -2.826) (end 4.711 2.826) (layer F.SilkS) (width 0.12))
(fp_line (start 4.671 -2.867) (end 4.671 2.867) (layer F.SilkS) (width 0.12))
(fp_line (start 4.631 -2.907) (end 4.631 2.907) (layer F.SilkS) (width 0.12))
(fp_line (start 4.591 -2.945) (end 4.591 2.945) (layer F.SilkS) (width 0.12))
(fp_line (start 4.551 -2.983) (end 4.551 2.983) (layer F.SilkS) (width 0.12))
(fp_line (start 4.511 1.04) (end 4.511 3.019) (layer F.SilkS) (width 0.12))
(fp_line (start 4.511 -3.019) (end 4.511 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.471 1.04) (end 4.471 3.055) (layer F.SilkS) (width 0.12))
(fp_line (start 4.471 -3.055) (end 4.471 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.431 1.04) (end 4.431 3.09) (layer F.SilkS) (width 0.12))
(fp_line (start 4.431 -3.09) (end 4.431 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.391 1.04) (end 4.391 3.124) (layer F.SilkS) (width 0.12))
(fp_line (start 4.391 -3.124) (end 4.391 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.351 1.04) (end 4.351 3.156) (layer F.SilkS) (width 0.12))
(fp_line (start 4.351 -3.156) (end 4.351 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.311 1.04) (end 4.311 3.189) (layer F.SilkS) (width 0.12))
(fp_line (start 4.311 -3.189) (end 4.311 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.271 1.04) (end 4.271 3.22) (layer F.SilkS) (width 0.12))
(fp_line (start 4.271 -3.22) (end 4.271 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.231 1.04) (end 4.231 3.25) (layer F.SilkS) (width 0.12))
(fp_line (start 4.231 -3.25) (end 4.231 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.191 1.04) (end 4.191 3.28) (layer F.SilkS) (width 0.12))
(fp_line (start 4.191 -3.28) (end 4.191 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.151 1.04) (end 4.151 3.309) (layer F.SilkS) (width 0.12))
(fp_line (start 4.151 -3.309) (end 4.151 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.111 1.04) (end 4.111 3.338) (layer F.SilkS) (width 0.12))
(fp_line (start 4.111 -3.338) (end 4.111 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.071 1.04) (end 4.071 3.365) (layer F.SilkS) (width 0.12))
(fp_line (start 4.071 -3.365) (end 4.071 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.031 1.04) (end 4.031 3.392) (layer F.SilkS) (width 0.12))
(fp_line (start 4.031 -3.392) (end 4.031 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.991 1.04) (end 3.991 3.418) (layer F.SilkS) (width 0.12))
(fp_line (start 3.991 -3.418) (end 3.991 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.951 1.04) (end 3.951 3.444) (layer F.SilkS) (width 0.12))
(fp_line (start 3.951 -3.444) (end 3.951 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.911 1.04) (end 3.911 3.469) (layer F.SilkS) (width 0.12))
(fp_line (start 3.911 -3.469) (end 3.911 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.871 1.04) (end 3.871 3.493) (layer F.SilkS) (width 0.12))
(fp_line (start 3.871 -3.493) (end 3.871 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.831 1.04) (end 3.831 3.517) (layer F.SilkS) (width 0.12))
(fp_line (start 3.831 -3.517) (end 3.831 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.791 1.04) (end 3.791 3.54) (layer F.SilkS) (width 0.12))
(fp_line (start 3.791 -3.54) (end 3.791 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.751 1.04) (end 3.751 3.562) (layer F.SilkS) (width 0.12))
(fp_line (start 3.751 -3.562) (end 3.751 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.711 1.04) (end 3.711 3.584) (layer F.SilkS) (width 0.12))
(fp_line (start 3.711 -3.584) (end 3.711 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.671 1.04) (end 3.671 3.606) (layer F.SilkS) (width 0.12))
(fp_line (start 3.671 -3.606) (end 3.671 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.631 1.04) (end 3.631 3.627) (layer F.SilkS) (width 0.12))
(fp_line (start 3.631 -3.627) (end 3.631 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.591 1.04) (end 3.591 3.647) (layer F.SilkS) (width 0.12))
(fp_line (start 3.591 -3.647) (end 3.591 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.551 1.04) (end 3.551 3.666) (layer F.SilkS) (width 0.12))
(fp_line (start 3.551 -3.666) (end 3.551 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.511 1.04) (end 3.511 3.686) (layer F.SilkS) (width 0.12))
(fp_line (start 3.511 -3.686) (end 3.511 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.471 1.04) (end 3.471 3.704) (layer F.SilkS) (width 0.12))
(fp_line (start 3.471 -3.704) (end 3.471 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.431 1.04) (end 3.431 3.722) (layer F.SilkS) (width 0.12))
(fp_line (start 3.431 -3.722) (end 3.431 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.391 1.04) (end 3.391 3.74) (layer F.SilkS) (width 0.12))
(fp_line (start 3.391 -3.74) (end 3.391 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.351 1.04) (end 3.351 3.757) (layer F.SilkS) (width 0.12))
(fp_line (start 3.351 -3.757) (end 3.351 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.311 1.04) (end 3.311 3.774) (layer F.SilkS) (width 0.12))
(fp_line (start 3.311 -3.774) (end 3.311 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.271 1.04) (end 3.271 3.79) (layer F.SilkS) (width 0.12))
(fp_line (start 3.271 -3.79) (end 3.271 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.231 1.04) (end 3.231 3.805) (layer F.SilkS) (width 0.12))
(fp_line (start 3.231 -3.805) (end 3.231 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.191 1.04) (end 3.191 3.821) (layer F.SilkS) (width 0.12))
(fp_line (start 3.191 -3.821) (end 3.191 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.151 1.04) (end 3.151 3.835) (layer F.SilkS) (width 0.12))
(fp_line (start 3.151 -3.835) (end 3.151 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.111 1.04) (end 3.111 3.85) (layer F.SilkS) (width 0.12))
(fp_line (start 3.111 -3.85) (end 3.111 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.071 1.04) (end 3.071 3.863) (layer F.SilkS) (width 0.12))
(fp_line (start 3.071 -3.863) (end 3.071 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.031 1.04) (end 3.031 3.877) (layer F.SilkS) (width 0.12))
(fp_line (start 3.031 -3.877) (end 3.031 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.991 1.04) (end 2.991 3.889) (layer F.SilkS) (width 0.12))
(fp_line (start 2.991 -3.889) (end 2.991 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.951 1.04) (end 2.951 3.902) (layer F.SilkS) (width 0.12))
(fp_line (start 2.951 -3.902) (end 2.951 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.911 1.04) (end 2.911 3.914) (layer F.SilkS) (width 0.12))
(fp_line (start 2.911 -3.914) (end 2.911 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.871 1.04) (end 2.871 3.925) (layer F.SilkS) (width 0.12))
(fp_line (start 2.871 -3.925) (end 2.871 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.831 1.04) (end 2.831 3.936) (layer F.SilkS) (width 0.12))
(fp_line (start 2.831 -3.936) (end 2.831 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.791 1.04) (end 2.791 3.947) (layer F.SilkS) (width 0.12))
(fp_line (start 2.791 -3.947) (end 2.791 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.751 1.04) (end 2.751 3.957) (layer F.SilkS) (width 0.12))
(fp_line (start 2.751 -3.957) (end 2.751 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.711 1.04) (end 2.711 3.967) (layer F.SilkS) (width 0.12))
(fp_line (start 2.711 -3.967) (end 2.711 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.671 1.04) (end 2.671 3.976) (layer F.SilkS) (width 0.12))
(fp_line (start 2.671 -3.976) (end 2.671 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.631 1.04) (end 2.631 3.985) (layer F.SilkS) (width 0.12))
(fp_line (start 2.631 -3.985) (end 2.631 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.591 1.04) (end 2.591 3.994) (layer F.SilkS) (width 0.12))
(fp_line (start 2.591 -3.994) (end 2.591 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.551 1.04) (end 2.551 4.002) (layer F.SilkS) (width 0.12))
(fp_line (start 2.551 -4.002) (end 2.551 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.511 1.04) (end 2.511 4.01) (layer F.SilkS) (width 0.12))
(fp_line (start 2.511 -4.01) (end 2.511 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.471 1.04) (end 2.471 4.017) (layer F.SilkS) (width 0.12))
(fp_line (start 2.471 -4.017) (end 2.471 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.43 -4.024) (end 2.43 4.024) (layer F.SilkS) (width 0.12))
(fp_line (start 2.39 -4.03) (end 2.39 4.03) (layer F.SilkS) (width 0.12))
(fp_line (start 2.35 -4.037) (end 2.35 4.037) (layer F.SilkS) (width 0.12))
(fp_line (start 2.31 -4.042) (end 2.31 4.042) (layer F.SilkS) (width 0.12))
(fp_line (start 2.27 -4.048) (end 2.27 4.048) (layer F.SilkS) (width 0.12))
(fp_line (start 2.23 -4.052) (end 2.23 4.052) (layer F.SilkS) (width 0.12))
(fp_line (start 2.19 -4.057) (end 2.19 4.057) (layer F.SilkS) (width 0.12))
(fp_line (start 2.15 -4.061) (end 2.15 4.061) (layer F.SilkS) (width 0.12))
(fp_line (start 2.11 -4.065) (end 2.11 4.065) (layer F.SilkS) (width 0.12))
(fp_line (start 2.07 -4.068) (end 2.07 4.068) (layer F.SilkS) (width 0.12))
(fp_line (start 2.03 -4.071) (end 2.03 4.071) (layer F.SilkS) (width 0.12))
(fp_line (start 1.99 -4.074) (end 1.99 4.074) (layer F.SilkS) (width 0.12))
(fp_line (start 1.95 -4.076) (end 1.95 4.076) (layer F.SilkS) (width 0.12))
(fp_line (start 1.91 -4.077) (end 1.91 4.077) (layer F.SilkS) (width 0.12))
(fp_line (start 1.87 -4.079) (end 1.87 4.079) (layer F.SilkS) (width 0.12))
(fp_line (start 1.83 -4.08) (end 1.83 4.08) (layer F.SilkS) (width 0.12))
(fp_line (start 1.79 -4.08) (end 1.79 4.08) (layer F.SilkS) (width 0.12))
(fp_line (start 1.75 -4.08) (end 1.75 4.08) (layer F.SilkS) (width 0.12))
(fp_line (start -1.276759 -2.1475) (end -1.276759 -1.3475) (layer F.Fab) (width 0.1))
(fp_line (start -1.676759 -1.7475) (end -0.876759 -1.7475) (layer F.Fab) (width 0.1))
(fp_circle (center 1.75 0) (end 6 0) (layer F.CrtYd) (width 0.05))
(fp_circle (center 1.75 0) (end 5.87 0) (layer F.SilkS) (width 0.12))
(fp_circle (center 1.75 0) (end 5.75 0) (layer F.Fab) (width 0.1))
(pad 2 thru_hole circle (at 3.5 0 90) (size 1.6 1.6) (drill 0.8) (layers *.Cu *.Mask)
(net 2 GND))
(pad 1 thru_hole rect (at 0 0 90) (size 1.6 1.6) (drill 0.8) (layers *.Cu *.Mask)
(net 3 +8V))
(model ${KISYS3DMOD}/Capacitor_THT.3dshapes/CP_Radial_D8.0mm_P3.50mm.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_THT:CP_Radial_D8.0mm_P3.50mm (layer F.Cu) (tedit 5AE50EF0) (tstamp 5DEF0F74)
(at 26.5 40 90)
(descr "CP, Radial series, Radial, pin pitch=3.50mm, , diameter=8mm, Electrolytic Capacitor")
(tags "CP Radial series Radial pin pitch 3.50mm diameter 8mm Electrolytic Capacitor")
(path /5D7139D5)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference C105 (at 1.75 -5.25 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 470u (at 1.75 5.25 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_circle (center 1.75 0) (end 5.75 0) (layer F.Fab) (width 0.1))
(fp_circle (center 1.75 0) (end 5.87 0) (layer F.SilkS) (width 0.12))
(fp_circle (center 1.75 0) (end 6 0) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.676759 -1.7475) (end -0.876759 -1.7475) (layer F.Fab) (width 0.1))
(fp_line (start -1.276759 -2.1475) (end -1.276759 -1.3475) (layer F.Fab) (width 0.1))
(fp_line (start 1.75 -4.08) (end 1.75 4.08) (layer F.SilkS) (width 0.12))
(fp_line (start 1.79 -4.08) (end 1.79 4.08) (layer F.SilkS) (width 0.12))
(fp_line (start 1.83 -4.08) (end 1.83 4.08) (layer F.SilkS) (width 0.12))
(fp_line (start 1.87 -4.079) (end 1.87 4.079) (layer F.SilkS) (width 0.12))
(fp_line (start 1.91 -4.077) (end 1.91 4.077) (layer F.SilkS) (width 0.12))
(fp_line (start 1.95 -4.076) (end 1.95 4.076) (layer F.SilkS) (width 0.12))
(fp_line (start 1.99 -4.074) (end 1.99 4.074) (layer F.SilkS) (width 0.12))
(fp_line (start 2.03 -4.071) (end 2.03 4.071) (layer F.SilkS) (width 0.12))
(fp_line (start 2.07 -4.068) (end 2.07 4.068) (layer F.SilkS) (width 0.12))
(fp_line (start 2.11 -4.065) (end 2.11 4.065) (layer F.SilkS) (width 0.12))
(fp_line (start 2.15 -4.061) (end 2.15 4.061) (layer F.SilkS) (width 0.12))
(fp_line (start 2.19 -4.057) (end 2.19 4.057) (layer F.SilkS) (width 0.12))
(fp_line (start 2.23 -4.052) (end 2.23 4.052) (layer F.SilkS) (width 0.12))
(fp_line (start 2.27 -4.048) (end 2.27 4.048) (layer F.SilkS) (width 0.12))
(fp_line (start 2.31 -4.042) (end 2.31 4.042) (layer F.SilkS) (width 0.12))
(fp_line (start 2.35 -4.037) (end 2.35 4.037) (layer F.SilkS) (width 0.12))
(fp_line (start 2.39 -4.03) (end 2.39 4.03) (layer F.SilkS) (width 0.12))
(fp_line (start 2.43 -4.024) (end 2.43 4.024) (layer F.SilkS) (width 0.12))
(fp_line (start 2.471 -4.017) (end 2.471 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.471 1.04) (end 2.471 4.017) (layer F.SilkS) (width 0.12))
(fp_line (start 2.511 -4.01) (end 2.511 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.511 1.04) (end 2.511 4.01) (layer F.SilkS) (width 0.12))
(fp_line (start 2.551 -4.002) (end 2.551 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.551 1.04) (end 2.551 4.002) (layer F.SilkS) (width 0.12))
(fp_line (start 2.591 -3.994) (end 2.591 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.591 1.04) (end 2.591 3.994) (layer F.SilkS) (width 0.12))
(fp_line (start 2.631 -3.985) (end 2.631 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.631 1.04) (end 2.631 3.985) (layer F.SilkS) (width 0.12))
(fp_line (start 2.671 -3.976) (end 2.671 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.671 1.04) (end 2.671 3.976) (layer F.SilkS) (width 0.12))
(fp_line (start 2.711 -3.967) (end 2.711 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.711 1.04) (end 2.711 3.967) (layer F.SilkS) (width 0.12))
(fp_line (start 2.751 -3.957) (end 2.751 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.751 1.04) (end 2.751 3.957) (layer F.SilkS) (width 0.12))
(fp_line (start 2.791 -3.947) (end 2.791 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.791 1.04) (end 2.791 3.947) (layer F.SilkS) (width 0.12))
(fp_line (start 2.831 -3.936) (end 2.831 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.831 1.04) (end 2.831 3.936) (layer F.SilkS) (width 0.12))
(fp_line (start 2.871 -3.925) (end 2.871 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.871 1.04) (end 2.871 3.925) (layer F.SilkS) (width 0.12))
(fp_line (start 2.911 -3.914) (end 2.911 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.911 1.04) (end 2.911 3.914) (layer F.SilkS) (width 0.12))
(fp_line (start 2.951 -3.902) (end 2.951 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.951 1.04) (end 2.951 3.902) (layer F.SilkS) (width 0.12))
(fp_line (start 2.991 -3.889) (end 2.991 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 2.991 1.04) (end 2.991 3.889) (layer F.SilkS) (width 0.12))
(fp_line (start 3.031 -3.877) (end 3.031 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.031 1.04) (end 3.031 3.877) (layer F.SilkS) (width 0.12))
(fp_line (start 3.071 -3.863) (end 3.071 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.071 1.04) (end 3.071 3.863) (layer F.SilkS) (width 0.12))
(fp_line (start 3.111 -3.85) (end 3.111 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.111 1.04) (end 3.111 3.85) (layer F.SilkS) (width 0.12))
(fp_line (start 3.151 -3.835) (end 3.151 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.151 1.04) (end 3.151 3.835) (layer F.SilkS) (width 0.12))
(fp_line (start 3.191 -3.821) (end 3.191 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.191 1.04) (end 3.191 3.821) (layer F.SilkS) (width 0.12))
(fp_line (start 3.231 -3.805) (end 3.231 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.231 1.04) (end 3.231 3.805) (layer F.SilkS) (width 0.12))
(fp_line (start 3.271 -3.79) (end 3.271 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.271 1.04) (end 3.271 3.79) (layer F.SilkS) (width 0.12))
(fp_line (start 3.311 -3.774) (end 3.311 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.311 1.04) (end 3.311 3.774) (layer F.SilkS) (width 0.12))
(fp_line (start 3.351 -3.757) (end 3.351 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.351 1.04) (end 3.351 3.757) (layer F.SilkS) (width 0.12))
(fp_line (start 3.391 -3.74) (end 3.391 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.391 1.04) (end 3.391 3.74) (layer F.SilkS) (width 0.12))
(fp_line (start 3.431 -3.722) (end 3.431 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.431 1.04) (end 3.431 3.722) (layer F.SilkS) (width 0.12))
(fp_line (start 3.471 -3.704) (end 3.471 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.471 1.04) (end 3.471 3.704) (layer F.SilkS) (width 0.12))
(fp_line (start 3.511 -3.686) (end 3.511 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.511 1.04) (end 3.511 3.686) (layer F.SilkS) (width 0.12))
(fp_line (start 3.551 -3.666) (end 3.551 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.551 1.04) (end 3.551 3.666) (layer F.SilkS) (width 0.12))
(fp_line (start 3.591 -3.647) (end 3.591 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.591 1.04) (end 3.591 3.647) (layer F.SilkS) (width 0.12))
(fp_line (start 3.631 -3.627) (end 3.631 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.631 1.04) (end 3.631 3.627) (layer F.SilkS) (width 0.12))
(fp_line (start 3.671 -3.606) (end 3.671 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.671 1.04) (end 3.671 3.606) (layer F.SilkS) (width 0.12))
(fp_line (start 3.711 -3.584) (end 3.711 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.711 1.04) (end 3.711 3.584) (layer F.SilkS) (width 0.12))
(fp_line (start 3.751 -3.562) (end 3.751 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.751 1.04) (end 3.751 3.562) (layer F.SilkS) (width 0.12))
(fp_line (start 3.791 -3.54) (end 3.791 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.791 1.04) (end 3.791 3.54) (layer F.SilkS) (width 0.12))
(fp_line (start 3.831 -3.517) (end 3.831 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.831 1.04) (end 3.831 3.517) (layer F.SilkS) (width 0.12))
(fp_line (start 3.871 -3.493) (end 3.871 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.871 1.04) (end 3.871 3.493) (layer F.SilkS) (width 0.12))
(fp_line (start 3.911 -3.469) (end 3.911 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.911 1.04) (end 3.911 3.469) (layer F.SilkS) (width 0.12))
(fp_line (start 3.951 -3.444) (end 3.951 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.951 1.04) (end 3.951 3.444) (layer F.SilkS) (width 0.12))
(fp_line (start 3.991 -3.418) (end 3.991 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 3.991 1.04) (end 3.991 3.418) (layer F.SilkS) (width 0.12))
(fp_line (start 4.031 -3.392) (end 4.031 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.031 1.04) (end 4.031 3.392) (layer F.SilkS) (width 0.12))
(fp_line (start 4.071 -3.365) (end 4.071 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.071 1.04) (end 4.071 3.365) (layer F.SilkS) (width 0.12))
(fp_line (start 4.111 -3.338) (end 4.111 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.111 1.04) (end 4.111 3.338) (layer F.SilkS) (width 0.12))
(fp_line (start 4.151 -3.309) (end 4.151 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.151 1.04) (end 4.151 3.309) (layer F.SilkS) (width 0.12))
(fp_line (start 4.191 -3.28) (end 4.191 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.191 1.04) (end 4.191 3.28) (layer F.SilkS) (width 0.12))
(fp_line (start 4.231 -3.25) (end 4.231 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.231 1.04) (end 4.231 3.25) (layer F.SilkS) (width 0.12))
(fp_line (start 4.271 -3.22) (end 4.271 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.271 1.04) (end 4.271 3.22) (layer F.SilkS) (width 0.12))
(fp_line (start 4.311 -3.189) (end 4.311 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.311 1.04) (end 4.311 3.189) (layer F.SilkS) (width 0.12))
(fp_line (start 4.351 -3.156) (end 4.351 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.351 1.04) (end 4.351 3.156) (layer F.SilkS) (width 0.12))
(fp_line (start 4.391 -3.124) (end 4.391 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.391 1.04) (end 4.391 3.124) (layer F.SilkS) (width 0.12))
(fp_line (start 4.431 -3.09) (end 4.431 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.431 1.04) (end 4.431 3.09) (layer F.SilkS) (width 0.12))
(fp_line (start 4.471 -3.055) (end 4.471 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.471 1.04) (end 4.471 3.055) (layer F.SilkS) (width 0.12))
(fp_line (start 4.511 -3.019) (end 4.511 -1.04) (layer F.SilkS) (width 0.12))
(fp_line (start 4.511 1.04) (end 4.511 3.019) (layer F.SilkS) (width 0.12))
(fp_line (start 4.551 -2.983) (end 4.551 2.983) (layer F.SilkS) (width 0.12))
(fp_line (start 4.591 -2.945) (end 4.591 2.945) (layer F.SilkS) (width 0.12))
(fp_line (start 4.631 -2.907) (end 4.631 2.907) (layer F.SilkS) (width 0.12))
(fp_line (start 4.671 -2.867) (end 4.671 2.867) (layer F.SilkS) (width 0.12))
(fp_line (start 4.711 -2.826) (end 4.711 2.826) (layer F.SilkS) (width 0.12))
(fp_line (start 4.751 -2.784) (end 4.751 2.784) (layer F.SilkS) (width 0.12))
(fp_line (start 4.791 -2.741) (end 4.791 2.741) (layer F.SilkS) (width 0.12))
(fp_line (start 4.831 -2.697) (end 4.831 2.697) (layer F.SilkS) (width 0.12))
(fp_line (start 4.871 -2.651) (end 4.871 2.651) (layer F.SilkS) (width 0.12))
(fp_line (start 4.911 -2.604) (end 4.911 2.604) (layer F.SilkS) (width 0.12))
(fp_line (start 4.951 -2.556) (end 4.951 2.556) (layer F.SilkS) (width 0.12))
(fp_line (start 4.991 -2.505) (end 4.991 2.505) (layer F.SilkS) (width 0.12))
(fp_line (start 5.031 -2.454) (end 5.031 2.454) (layer F.SilkS) (width 0.12))
(fp_line (start 5.071 -2.4) (end 5.071 2.4) (layer F.SilkS) (width 0.12))
(fp_line (start 5.111 -2.345) (end 5.111 2.345) (layer F.SilkS) (width 0.12))
(fp_line (start 5.151 -2.287) (end 5.151 2.287) (layer F.SilkS) (width 0.12))
(fp_line (start 5.191 -2.228) (end 5.191 2.228) (layer F.SilkS) (width 0.12))
(fp_line (start 5.231 -2.166) (end 5.231 2.166) (layer F.SilkS) (width 0.12))
(fp_line (start 5.271 -2.102) (end 5.271 2.102) (layer F.SilkS) (width 0.12))
(fp_line (start 5.311 -2.034) (end 5.311 2.034) (layer F.SilkS) (width 0.12))
(fp_line (start 5.351 -1.964) (end 5.351 1.964) (layer F.SilkS) (width 0.12))
(fp_line (start 5.391 -1.89) (end 5.391 1.89) (layer F.SilkS) (width 0.12))
(fp_line (start 5.431 -1.813) (end 5.431 1.813) (layer F.SilkS) (width 0.12))
(fp_line (start 5.471 -1.731) (end 5.471 1.731) (layer F.SilkS) (width 0.12))
(fp_line (start 5.511 -1.645) (end 5.511 1.645) (layer F.SilkS) (width 0.12))
(fp_line (start 5.551 -1.552) (end 5.551 1.552) (layer F.SilkS) (width 0.12))
(fp_line (start 5.591 -1.453) (end 5.591 1.453) (layer F.SilkS) (width 0.12))
(fp_line (start 5.631 -1.346) (end 5.631 1.346) (layer F.SilkS) (width 0.12))
(fp_line (start 5.671 -1.229) (end 5.671 1.229) (layer F.SilkS) (width 0.12))
(fp_line (start 5.711 -1.098) (end 5.711 1.098) (layer F.SilkS) (width 0.12))
(fp_line (start 5.751 -0.948) (end 5.751 0.948) (layer F.SilkS) (width 0.12))
(fp_line (start 5.791 -0.768) (end 5.791 0.768) (layer F.SilkS) (width 0.12))
(fp_line (start 5.831 -0.533) (end 5.831 0.533) (layer F.SilkS) (width 0.12))
(fp_line (start -2.659698 -2.315) (end -1.859698 -2.315) (layer F.SilkS) (width 0.12))
(fp_line (start -2.259698 -2.715) (end -2.259698 -1.915) (layer F.SilkS) (width 0.12))
(fp_text user %R (at 1.75 0 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 thru_hole rect (at 0 0 90) (size 1.6 1.6) (drill 0.8) (layers *.Cu *.Mask)
(net 3 +8V))
(pad 2 thru_hole circle (at 3.5 0 90) (size 1.6 1.6) (drill 0.8) (layers *.Cu *.Mask)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_THT.3dshapes/CP_Radial_D8.0mm_P3.50mm.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5DEF0F85)
(at 29.5 47.5 270)
(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D71F258)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference C106 (at -1.59 1.71 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.65 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1))
(fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1))
(fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1))
(fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1))
(fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12))
(fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12))
(fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)))
)
(pad 1 smd roundrect (at -0.9375 0 270) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 3 +8V))
(pad 2 smd roundrect (at 0.9375 0 270) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5DEF0F96)
(at 78.5 73 180)
(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D992429)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference C107 (at -3.5 0) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.65) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)))
)
(fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12))
(fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12))
(fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1))
(fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1))
(fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1))
(fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.9375 0 180) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.9375 0 180) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 3 +8V))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF0FA7)
(at 39.5 49.5 90)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D722F9B)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference C108 (at 0.22 1.81 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_Elec_5x5.4 (layer F.Cu) (tedit 5BC8D926) (tstamp 5DEF0FCB)
(at 76 56 180)
(descr "SMD capacitor, aluminum electrolytic nonpolar, 5.0x5.4mm")
(tags "capacitor electrolyic nonpolar")
(path /5D9883BA)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference C109 (at 0 -3.7) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10u (at 0 3.7) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -3.7 1.05) (end -2.9 1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -3.7 -1.05) (end -3.7 1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.9 -1.05) (end -3.7 -1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.9 1.05) (end -2.9 1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.9 -1.75) (end -2.9 -1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.9 -1.75) (end -1.75 -2.9) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.9 1.75) (end -1.75 2.9) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.75 -2.9) (end 2.9 -2.9) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.75 2.9) (end 2.9 2.9) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.9 1.05) (end 2.9 2.9) (layer F.CrtYd) (width 0.05))
(fp_line (start 3.7 1.05) (end 2.9 1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 3.7 -1.05) (end 3.7 1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.9 -1.05) (end 3.7 -1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.9 -2.9) (end 2.9 -1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.76 1.695563) (end -1.695563 2.76) (layer F.SilkS) (width 0.12))
(fp_line (start -2.76 -1.695563) (end -1.695563 -2.76) (layer F.SilkS) (width 0.12))
(fp_line (start -2.76 -1.695563) (end -2.76 -1.06) (layer F.SilkS) (width 0.12))
(fp_line (start -2.76 1.695563) (end -2.76 1.06) (layer F.SilkS) (width 0.12))
(fp_line (start -1.695563 2.76) (end 2.76 2.76) (layer F.SilkS) (width 0.12))
(fp_line (start -1.695563 -2.76) (end 2.76 -2.76) (layer F.SilkS) (width 0.12))
(fp_line (start 2.76 -2.76) (end 2.76 -1.06) (layer F.SilkS) (width 0.12))
(fp_line (start 2.76 2.76) (end 2.76 1.06) (layer F.SilkS) (width 0.12))
(fp_line (start -2.65 1.65) (end -1.65 2.65) (layer F.Fab) (width 0.1))
(fp_line (start -2.65 -1.65) (end -1.65 -2.65) (layer F.Fab) (width 0.1))
(fp_line (start -2.65 -1.65) (end -2.65 1.65) (layer F.Fab) (width 0.1))
(fp_line (start -1.65 2.65) (end 2.65 2.65) (layer F.Fab) (width 0.1))
(fp_line (start -1.65 -2.65) (end 2.65 -2.65) (layer F.Fab) (width 0.1))
(fp_line (start 2.65 -2.65) (end 2.65 2.65) (layer F.Fab) (width 0.1))
(fp_circle (center 0 0) (end 2.5 0) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 2.0625 0 180) (size 2.775 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.15625)
(net 2 GND))
(pad 1 smd roundrect (at -2.0625 0 180) (size 2.775 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.15625)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 48 +5VL))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_Elec_5x5.4.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_Elec_5x5.4 (layer F.Cu) (tedit 5BC8D926) (tstamp 5DEF0FEF)
(at 39.5 58)
(descr "SMD capacitor, aluminum electrolytic nonpolar, 5.0x5.4mm")
(tags "capacitor electrolyic nonpolar")
(path /5D7289BD)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference C110 (at 1.54 -3.71) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10u (at 0 3.7) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_circle (center 0 0) (end 2.5 0) (layer F.Fab) (width 0.1))
(fp_line (start 2.65 -2.65) (end 2.65 2.65) (layer F.Fab) (width 0.1))
(fp_line (start -1.65 -2.65) (end 2.65 -2.65) (layer F.Fab) (width 0.1))
(fp_line (start -1.65 2.65) (end 2.65 2.65) (layer F.Fab) (width 0.1))
(fp_line (start -2.65 -1.65) (end -2.65 1.65) (layer F.Fab) (width 0.1))
(fp_line (start -2.65 -1.65) (end -1.65 -2.65) (layer F.Fab) (width 0.1))
(fp_line (start -2.65 1.65) (end -1.65 2.65) (layer F.Fab) (width 0.1))
(fp_line (start 2.76 2.76) (end 2.76 1.06) (layer F.SilkS) (width 0.12))
(fp_line (start 2.76 -2.76) (end 2.76 -1.06) (layer F.SilkS) (width 0.12))
(fp_line (start -1.695563 -2.76) (end 2.76 -2.76) (layer F.SilkS) (width 0.12))
(fp_line (start -1.695563 2.76) (end 2.76 2.76) (layer F.SilkS) (width 0.12))
(fp_line (start -2.76 1.695563) (end -2.76 1.06) (layer F.SilkS) (width 0.12))
(fp_line (start -2.76 -1.695563) (end -2.76 -1.06) (layer F.SilkS) (width 0.12))
(fp_line (start -2.76 -1.695563) (end -1.695563 -2.76) (layer F.SilkS) (width 0.12))
(fp_line (start -2.76 1.695563) (end -1.695563 2.76) (layer F.SilkS) (width 0.12))
(fp_line (start 2.9 -2.9) (end 2.9 -1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.9 -1.05) (end 3.7 -1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 3.7 -1.05) (end 3.7 1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 3.7 1.05) (end 2.9 1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.9 1.05) (end 2.9 2.9) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.75 2.9) (end 2.9 2.9) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.75 -2.9) (end 2.9 -2.9) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.9 1.75) (end -1.75 2.9) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.9 -1.75) (end -1.75 -2.9) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.9 -1.75) (end -2.9 -1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.9 1.05) (end -2.9 1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.9 -1.05) (end -3.7 -1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -3.7 -1.05) (end -3.7 1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -3.7 1.05) (end -2.9 1.05) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 smd roundrect (at -2.0625 0) (size 2.775 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.15625)
(net 4 +3V3))
(pad 2 smd roundrect (at 2.0625 0) (size 2.775 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.15625)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_Elec_5x5.4.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_1206_3216Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1000)
(at 73 68.5 270)
(descr "Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D99DEEA)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference C111 (at 0 1.5 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 1u (at 0 1.82 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1))
(fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12))
(fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12))
(fp_line (start -2.28 1.12) (end -2.28 -1.12) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 -1.12) (end 2.28 -1.12) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 -1.12) (end 2.28 1.12) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 1.12) (end -2.28 1.12) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.8 0.8) (thickness 0.12)))
)
(pad 1 smd roundrect (at -1.4 0 270) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 5 +5V))
(pad 2 smd roundrect (at 1.4 0 270) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_1206_3216Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_1210_3225Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1011)
(at 93 77.5 180)
(descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8DCE92)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference C103 (at 0 2.5) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10u (at 0 2.28) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.8 0.8) (thickness 0.12)))
)
(fp_line (start 2.28 1.58) (end -2.28 1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 -1.58) (end 2.28 1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 -1.58) (end 2.28 -1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 1.58) (end -2.28 -1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.602064 1.36) (end 0.602064 1.36) (layer F.SilkS) (width 0.12))
(fp_line (start -0.602064 -1.36) (end 0.602064 -1.36) (layer F.SilkS) (width 0.12))
(fp_line (start 1.6 1.25) (end -1.6 1.25) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 -1.25) (end 1.6 1.25) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 -1.25) (end 1.6 -1.25) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 1.25) (end -1.6 -1.25) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 1.4 0 180) (size 1.25 2.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 3 +8V))
(pad 1 smd roundrect (at -1.4 0 180) (size 1.25 2.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5E01D917)
(at 85.5 96)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5DF4E0DE)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference C102 (at 3.47 0.1) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 22n (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 50 "Net-(C102-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 43 /OUT0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1033)
(at 41.64 105.61 270)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D793BDA)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C201 (at -0.11 1.64 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1044)
(at 44.5 105.5 90)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D8447D5)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C206 (at 0 -1.43 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 12p (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 63 "Net-(C206-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1055)
(at 52.5 105.5 270)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D841383)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C207 (at 3.5 0 270) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 12p (at 0 1.43 270) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0 270) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 64 "Net-(C207-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1066)
(at 32 72.5 180)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5DC2C880)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C209 (at 0 10.5) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1077)
(at 59 88.5)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D7A7211)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C211 (at 0.5 1.5) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 2u2 (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 65 "Net-(C211-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1088)
(at 50 80.5 270)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D9BD104)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C212 (at 0 1.5 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 66 "Net-(C212-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1099)
(at 42.7125 83.5 180)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D7A8470)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C213 (at -3.2875 0) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 2u2 (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 67 "Net-(C213-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5DEF10AA)
(at 57.17 102.03)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D7C8AA8)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C214 (at 0 1.43) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 100n (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 47 /Controller/VDDA))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF10BB)
(at 61 101)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D7C724B)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C216 (at 3.25 -1) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 1u (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 47 /Controller/VDDA))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5DEF10CC)
(at 30 95.5 180)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D7EAB78)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C217 (at 0.5 3.5) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 100n (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 6 /Controller/ENC1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5DEF10DD)
(at 30 100.5 180)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D7EB430)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C218 (at 0.5 1.5) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 100n (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 7 /Controller/ENC2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5DEF10FF)
(at 35.5 93)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D82D697)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C219 (at 0 1.43) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 100n (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 9 /Controller/SW1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1110)
(at 59.5 99)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D77625F)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C204 (at 0 -1.43) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1121)
(at 59 86.5)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D771354)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C205 (at 0 -1.5) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1132)
(at 38.5 99.5 90)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D775CE6)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C208 (at 0 -1.43 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_1210_3225Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1143)
(at 37 83.5 270)
(descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D8142D7)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C210 (at 0 -2.28 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10u (at 0 2.28 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -1.6 1.25) (end -1.6 -1.25) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 -1.25) (end 1.6 -1.25) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 -1.25) (end 1.6 1.25) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 1.25) (end -1.6 1.25) (layer F.Fab) (width 0.1))
(fp_line (start -0.602064 -1.36) (end 0.602064 -1.36) (layer F.SilkS) (width 0.12))
(fp_line (start -0.602064 1.36) (end 0.602064 1.36) (layer F.SilkS) (width 0.12))
(fp_line (start -2.28 1.58) (end -2.28 -1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 -1.58) (end 2.28 -1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 -1.58) (end 2.28 1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 1.58) (end -2.28 1.58) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.8 0.8) (thickness 0.12)))
)
(pad 1 smd roundrect (at -1.4 0 270) (size 1.25 2.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 4 +3V3))
(pad 2 smd roundrect (at 1.4 0 270) (size 1.25 2.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5DEF1187)
(at 51.5 98.5 270)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5D9BF43F)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C307 (at 0 1.43 90) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 1u (at 0 -1.43 90) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text user %R (at 0 0 90) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 8 /Controller/VREF))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5DEF11DC)
(at 65.5 87.5 270)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5D918057)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C311 (at -3.5 0 90) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(fp_text value 22n (at 0 -1.43 90) (layer B.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 10 /Frontend/FORCE+))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 11 /Frontend/FORCE-))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_1210_3225Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1220)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(at 80.75 76.75 90)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5D8F201B)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C316 (at 0 -2.28 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(fp_text value DNP (at 0 2.28 90) (layer F.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -1.6 1.25) (end -1.6 -1.25) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 -1.25) (end 1.6 -1.25) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 -1.25) (end 1.6 1.25) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 1.25) (end -1.6 1.25) (layer F.Fab) (width 0.1))
(fp_line (start -0.602064 -1.36) (end 0.602064 -1.36) (layer F.SilkS) (width 0.12))
(fp_line (start -0.602064 1.36) (end 0.602064 1.36) (layer F.SilkS) (width 0.12))
(fp_line (start -2.28 1.58) (end -2.28 -1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 -1.58) (end 2.28 -1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 -1.58) (end 2.28 1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 1.58) (end -2.28 1.58) (layer F.CrtYd) (width 0.05))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(fp_text user %R (at 0 0 90) (layer F.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 0.8 0.8) (thickness 0.12)))
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(pad 1 smd roundrect (at -1.4 0 90) (size 1.25 2.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 59 +3.3VA))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(pad 2 smd roundrect (at 1.4 0 90) (size 1.25 2.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module LED_SMD:LED_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF125D)
(at 25 56)
(descr "LED SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags diode)
(path /5D8E4FA2)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference D103 (at 1.65 1.66) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value LED (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.485 0.735) (end 0.8 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -1.485 -0.735) (end -1.485 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 -0.735) (end -1.485 -0.735) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.1) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.5 -0.4) (end -0.8 -0.1) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.5 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 44 /OUT3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 55 "Net-(D103-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/LED_SMD.3dshapes/LED_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module LED_SMD:LED_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1270)
(at 25 52)
(descr "LED SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags diode)
(path /5D8E4A3B)
(attr smd)
(fp_text reference D102 (at 4.55 -0.91) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value LED (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 0.8 -0.4) (end -0.5 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.5 -0.4) (end -0.8 -0.1) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.1) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.735) (end -1.485 -0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -1.485 -0.735) (end -1.485 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -1.485 0.735) (end 0.8 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 20 "Net-(D102-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 45 /OUT2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/LED_SMD.3dshapes/LED_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Diode_THT:Diode_Bridge_Round_D9.8mm (layer F.Cu) (tedit 5A142105) (tstamp 5DEF1281)
(at 45.5 40.5 90)
(descr "4-lead round diode bridge package, diameter 9.8mm, pin pitch 5.08mm, see http://www.vishay.com/docs/88769/woo5g.pdf")
(tags "diode bridge 9.8mm WOG pitch 5.08mm")
(path /5D6FE708)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference D101 (at 2.54 -3.302 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 2W005G-E4/51 (at 2.6035 8.509 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 3.81 2.54 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -1.524 -0.381) (end -1.524 5.461) (layer F.SilkS) (width 0.12))
(fp_line (start -1.397 5.461) (end -1.397 -0.381) (layer F.Fab) (width 0.12))
(fp_line (start -1.65 -2.61) (end 7.7 -2.61) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.65 -2.61) (end -1.65 7.7) (layer F.CrtYd) (width 0.05))
(fp_line (start 7.7 7.7) (end 7.7 -2.61) (layer F.CrtYd) (width 0.05))
(fp_line (start 7.7 7.7) (end -1.65 7.7) (layer F.CrtYd) (width 0.05))
(fp_arc (start 2.54 2.54) (end -0.381 -1.524) (angle 270) (layer F.SilkS) (width 0.12))
(fp_arc (start 2.54 2.54) (end -1.4 -0.38) (angle 287) (layer F.Fab) (width 0.12))
(pad 4 thru_hole oval (at 5.08 0 90) (size 2 2) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 53 "Net-(D101-Pad4)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 thru_hole oval (at 0 5.08 90) (size 2 2) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 54 "Net-(D101-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 thru_hole oval (at 5.08 5.08 90) (size 2 2) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(pad 1 thru_hole rect (at 0 0 90) (size 2 2) (drill 1) (layers *.Cu *.Mask)
(net 3 +8V))
(model ${KISYS3DMOD}/Diode_THT.3dshapes/Diode_Bridge_Round_D9.8mm.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module shimatta_tht:Schurter_0031.8201_20mm_Fuse (layer F.Cu) (tedit 5D6EB5E7) (tstamp 5DEF3D53)
(at 91 53 90)
(path /5D6ED850)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference F101 (at -14.5 0 180) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100mA/slow (at 0 -0.5 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -11.25 -2) (end -11.25 -5.5) (layer F.SilkS) (width 0.15))
(fp_line (start -11.25 -5.5) (end 11.25 -5.5) (layer F.SilkS) (width 0.15))
(fp_line (start 11.25 -5.5) (end 11.25 -2) (layer F.SilkS) (width 0.15))
(fp_line (start -11.25 2) (end -11.25 5.5) (layer F.SilkS) (width 0.15))
(fp_line (start -11.25 5.5) (end 11.25 5.5) (layer F.SilkS) (width 0.15))
(fp_line (start 11.25 5.5) (end 11.25 2) (layer F.SilkS) (width 0.15))
(pad 1 thru_hole circle (at -11.25 0 90) (size 3 3) (drill 1.3) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 22 /L_Trafo))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 thru_hole circle (at 11.25 0 90) (size 3 3) (drill 1.3) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 23 /L_IN))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
(module shimatta_tht:Schurter_0031.8201_20mm_Fuse (layer F.Cu) (tedit 5D6EB5E7) (tstamp 5E05A272)
(at 41.5 26)
(path /5D75937C)
Improve layout, change color of B.Silk and improve schematic
2020-01-12 14:56:58 +01:00
(fp_text reference F102 (at 8 -6.5) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 500mA/slow (at 0 -0.5) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 11.25 5.5) (end 11.25 2) (layer F.SilkS) (width 0.15))
(fp_line (start -11.25 5.5) (end 11.25 5.5) (layer F.SilkS) (width 0.15))
(fp_line (start -11.25 2) (end -11.25 5.5) (layer F.SilkS) (width 0.15))
(fp_line (start 11.25 -5.5) (end 11.25 -2) (layer F.SilkS) (width 0.15))
(fp_line (start -11.25 -5.5) (end 11.25 -5.5) (layer F.SilkS) (width 0.15))
(fp_line (start -11.25 -2) (end -11.25 -5.5) (layer F.SilkS) (width 0.15))
(pad 2 thru_hole circle (at 11.25 0) (size 3 3) (drill 1.3) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 56 "Net-(F102-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 thru_hole circle (at -11.25 0) (size 3 3) (drill 1.3) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 53 "Net-(D101-Pad4)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
(module Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF12C3)
(at 73 64 90)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags "inductor handsolder")
(path /5D99D868)
(attr smd)
(fp_text reference FB101 (at 0 -1.43 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value "600 Ohm" (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.171267 -0.51) (end 0.171267 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.171267 0.51) (end 0.171267 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.65 0.73) (end -1.65 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.65 -0.73) (end 1.65 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.65 -0.73) (end 1.65 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.65 0.73) (end -1.65 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.875 0 90) (size 1.05 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 5 +5V))
(pad 2 smd roundrect (at 0.875 0 90) (size 1.05 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 48 +5VL))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Inductor_SMD.3dshapes/L_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module MountingHole:MountingHole_3.2mm_M3_Pad_Via (layer F.Cu) (tedit 56DDBCCA) (tstamp 5DEF1303)
(at 91.5 102.5)
(descr "Mounting Hole 3.2mm, M3")
(tags "mounting hole 3.2mm m3")
(path /5D9DB41E)
(attr virtual)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference H101 (at 0 -4.2) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value M3 (at 0 4.2) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0.3 0) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_circle (center 0 0) (end 3.2 0) (layer Cmts.User) (width 0.15))
(fp_circle (center 0 0) (end 3.45 0) (layer F.CrtYd) (width 0.05))
(pad 1 thru_hole circle (at 0 0) (size 6.4 6.4) (drill 3.2) (layers *.Cu *.Mask)
(net 1 Earth))
(pad 1 thru_hole circle (at 2.4 0) (size 0.8 0.8) (drill 0.5) (layers *.Cu *.Mask)
(net 1 Earth))
(pad 1 thru_hole circle (at 1.697056 1.697056) (size 0.8 0.8) (drill 0.5) (layers *.Cu *.Mask)
(net 1 Earth))
(pad 1 thru_hole circle (at 0 2.4) (size 0.8 0.8) (drill 0.5) (layers *.Cu *.Mask)
(net 1 Earth))
(pad 1 thru_hole circle (at -1.697056 1.697056) (size 0.8 0.8) (drill 0.5) (layers *.Cu *.Mask)
(net 1 Earth))
(pad 1 thru_hole circle (at -2.4 0) (size 0.8 0.8) (drill 0.5) (layers *.Cu *.Mask)
(net 1 Earth))
(pad 1 thru_hole circle (at -1.697056 -1.697056) (size 0.8 0.8) (drill 0.5) (layers *.Cu *.Mask)
(net 1 Earth))
(pad 1 thru_hole circle (at 0 -2.4) (size 0.8 0.8) (drill 0.5) (layers *.Cu *.Mask)
(net 1 Earth))
(pad 1 thru_hole circle (at 1.697056 -1.697056) (size 0.8 0.8) (drill 0.5) (layers *.Cu *.Mask)
(net 1 Earth))
)
(module TerminalBlock:TerminalBlock_Altech_AK300-3_P5.00mm (layer F.Cu) (tedit 59FF0306) (tstamp 5DEF1386)
(at 91 25 270)
(descr "Altech AK300 terminal block, pitch 5.0mm, 45 degree angled, see http://www.mouser.com/ds/2/16/PCBMETRC-24178.pdf")
(tags "Altech AK300 terminal block pitch 5.0mm")
(path /5D6DCF6A)
(fp_text reference J101 (at -3.5 0 180) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value "230VAC IN" (at 4.95 7.3 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_arc (start -1.16 -4.66) (end -1.44 -4.14) (angle 104.2) (layer F.Fab) (width 0.1))
(fp_arc (start -0.04 -3.72) (end -1.64 -5.01) (angle 100) (layer F.Fab) (width 0.1))
(fp_arc (start 0.04 -6.08) (end 1.5 -4.13) (angle 75.5) (layer F.Fab) (width 0.1))
(fp_arc (start 1 -4.6) (end 1.51 -5.06) (angle 90.5) (layer F.Fab) (width 0.1))
(fp_arc (start 3.85 -4.66) (end 3.56 -4.14) (angle 104.2) (layer F.Fab) (width 0.1))
(fp_arc (start 4.96 -3.72) (end 3.36 -5.01) (angle 100) (layer F.Fab) (width 0.1))
(fp_arc (start 5.04 -6.08) (end 6.5 -4.13) (angle 75.5) (layer F.Fab) (width 0.1))
(fp_arc (start 6.01 -4.6) (end 6.51 -5.06) (angle 90.5) (layer F.Fab) (width 0.1))
(fp_arc (start 11.09 -4.6) (end 11.59 -5.06) (angle 90.5) (layer F.Fab) (width 0.1))
(fp_arc (start 10.12 -6.08) (end 11.58 -4.13) (angle 75.5) (layer F.Fab) (width 0.1))
(fp_arc (start 10.04 -3.72) (end 8.44 -5.01) (angle 100) (layer F.Fab) (width 0.1))
(fp_arc (start 8.93 -4.66) (end 8.64 -4.14) (angle 104.2) (layer F.Fab) (width 0.1))
(fp_line (start 13.42 6.46) (end -2.83 6.46) (layer F.CrtYd) (width 0.05))
(fp_line (start 13.42 6.46) (end 13.42 -6.48) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.83 -6.48) (end -2.83 6.46) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.83 -6.48) (end 13.42 -6.48) (layer F.CrtYd) (width 0.05))
(fp_line (start 3.34 -0.26) (end 6.64 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 -0.26) (end 3.34 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 7.02 -0.26) (end 6.64 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 1.64 -0.26) (end -1.67 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 -0.26) (end 1.64 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start -2.05 -0.26) (end -1.67 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start -1.51 -4.33) (end 1.53 -4.96) (layer F.Fab) (width 0.1))
(fp_line (start -1.64 -4.46) (end 1.41 -5.09) (layer F.Fab) (width 0.1))
(fp_line (start 3.49 -4.33) (end 6.54 -4.96) (layer F.Fab) (width 0.1))
(fp_line (start 3.36 -4.46) (end 6.41 -5.09) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 -5.98) (end -2.05 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start -2.05 -3.44) (end -2.05 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 -3.44) (end -2.05 -3.44) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 -3.44) (end 2.02 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 7.02 -3.44) (end 2.96 -3.44) (layer F.Fab) (width 0.1))
(fp_line (start 7.02 -5.98) (end 7.02 -3.44) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 -5.98) (end 7.02 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 -3.44) (end 2.96 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start -2.58 -3.19) (end -2.58 -6.23) (layer F.Fab) (width 0.1))
(fp_line (start -2.58 -3.19) (end 7.58 -3.19) (layer F.Fab) (width 0.1))
(fp_line (start -2.58 -0.65) (end -2.58 -3.19) (layer F.Fab) (width 0.1))
(fp_line (start -2.58 6.21) (end -2.58 -0.65) (layer F.Fab) (width 0.1))
(fp_line (start 6.64 0.5) (end 6.26 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 3.34 0.5) (end 3.72 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 1.64 0.5) (end 1.26 0.5) (layer F.Fab) (width 0.1))
(fp_line (start -1.67 0.5) (end -1.28 0.5) (layer F.Fab) (width 0.1))
(fp_line (start -1.67 3.67) (end -1.67 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 1.64 3.67) (end -1.67 3.67) (layer F.Fab) (width 0.1))
(fp_line (start 1.64 3.67) (end 1.64 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 3.34 3.67) (end 3.34 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 6.64 3.67) (end 3.34 3.67) (layer F.Fab) (width 0.1))
(fp_line (start 6.64 3.67) (end 6.64 0.5) (layer F.Fab) (width 0.1))
(fp_line (start -2.05 4.31) (end -2.05 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 4.31) (end 2.02 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 4.31) (end -2.05 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 7.02 4.31) (end 7.02 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 4.31) (end 2.96 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 4.31) (end 7.02 4.31) (layer F.Fab) (width 0.1))
(fp_line (start -2.05 6.21) (end 2.02 6.21) (layer F.Fab) (width 0.1))
(fp_line (start -2.58 6.21) (end -2.05 6.21) (layer F.Fab) (width 0.1))
(fp_line (start -2.05 -0.26) (end -2.05 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 6.21) (end 2.96 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 6.21) (end 2.02 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 7.02 6.21) (end 7.58 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 6.21) (end 7.02 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 7.02 -0.26) (end 7.02 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 6.21) (end 2.96 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 8.02 4.05) (end 8.02 5.2) (layer F.Fab) (width 0.1))
(fp_line (start 8.02 5.2) (end 8.02 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 3.72 2.53) (end 3.72 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 3.72 -0.26) (end 6.26 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 6.26 2.53) (end 6.26 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 3.72 2.53) (end 6.26 2.53) (layer F.Fab) (width 0.1))
(fp_line (start -1.28 2.53) (end -1.28 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start -1.28 -0.26) (end 1.26 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 1.26 2.53) (end 1.26 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start -1.28 2.53) (end 1.26 2.53) (layer F.Fab) (width 0.1))
(fp_line (start 8.8 2.53) (end 11.34 2.53) (layer F.Fab) (width 0.1))
(fp_line (start 11.34 2.53) (end 11.34 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 8.8 -0.26) (end 11.34 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 8.8 2.53) (end 8.8 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 -6.23) (end 12.66 -3.19) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 -6.23) (end 13.17 -6.23) (layer F.Fab) (width 0.1))
(fp_line (start 13.17 -6.23) (end 13.17 -1.41) (layer F.Fab) (width 0.1))
(fp_line (start 13.17 -1.41) (end 12.66 -1.66) (layer F.Fab) (width 0.1))
(fp_line (start 13.17 5.45) (end 12.66 5.2) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 5.2) (end 12.66 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 13.17 3.8) (end 12.66 4.05) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 4.05) (end 12.66 5.2) (layer F.Fab) (width 0.1))
(fp_line (start 13.17 3.8) (end 13.17 5.45) (layer F.Fab) (width 0.1))
(fp_line (start 8.04 6.21) (end 8.04 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 12.1 -0.26) (end 12.1 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 12.1 6.21) (end 12.66 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 8.04 4.31) (end 12.1 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 12.1 4.31) (end 12.1 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 11.72 3.67) (end 11.72 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 11.72 3.67) (end 8.42 3.67) (layer F.Fab) (width 0.1))
(fp_line (start 8.42 3.67) (end 8.42 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 8.42 0.5) (end 8.8 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 11.72 0.5) (end 11.34 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 -1.66) (end 12.66 -0.65) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 -0.65) (end 12.66 4.05) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 -3.19) (end 12.66 -1.66) (layer F.Fab) (width 0.1))
(fp_line (start 8.04 -3.44) (end 8.04 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 8.04 -5.98) (end 12.1 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 12.1 -5.98) (end 12.1 -3.44) (layer F.Fab) (width 0.1))
(fp_line (start 12.1 -3.44) (end 8.04 -3.44) (layer F.Fab) (width 0.1))
(fp_line (start 8.44 -4.46) (end 11.49 -5.09) (layer F.Fab) (width 0.1))
(fp_line (start 8.57 -4.33) (end 11.62 -4.96) (layer F.Fab) (width 0.1))
(fp_line (start 12.1 -0.26) (end 11.72 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 8.04 -0.26) (end 8.42 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 8.42 -0.26) (end 11.72 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start -2.58 -6.23) (end 12.66 -6.23) (layer F.Fab) (width 0.1))
(fp_line (start 7.58 -3.19) (end 12.6 -3.19) (layer F.Fab) (width 0.1))
(fp_line (start 12.09 6.21) (end 7.58 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 8.02 3.99) (end 8.02 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 -0.65) (end -2.52 -0.65) (layer F.Fab) (width 0.1))
(fp_line (start 13.25 -6.3) (end -2.65 -6.3) (layer F.SilkS) (width 0.12))
(fp_line (start 13.25 -1.25) (end 13.25 -6.3) (layer F.SilkS) (width 0.12))
(fp_line (start 12.75 -1.5) (end 13.25 -1.25) (layer F.SilkS) (width 0.12))
(fp_line (start 12.75 3.9) (end 12.75 -1.5) (layer F.SilkS) (width 0.12))
(fp_line (start 13.25 3.65) (end 12.75 3.9) (layer F.SilkS) (width 0.12))
(fp_line (start 13.25 5.65) (end 13.25 3.65) (layer F.SilkS) (width 0.12))
(fp_line (start 12.75 5.35) (end 13.25 5.65) (layer F.SilkS) (width 0.12))
(fp_line (start 12.75 6.3) (end 12.75 5.35) (layer F.SilkS) (width 0.12))
(fp_line (start -2.65 6.3) (end 12.75 6.3) (layer F.SilkS) (width 0.12))
(fp_line (start -2.65 -6.3) (end -2.65 6.3) (layer F.SilkS) (width 0.12))
(fp_text user %R (at 5 -2 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 3 thru_hole oval (at 10 0 270) (size 1.98 3.96) (drill 1.32) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 23 /L_IN))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 thru_hole oval (at 5 0 270) (size 1.98 3.96) (drill 1.32) (layers *.Cu *.Mask)
(net 1 Earth))
(pad 1 thru_hole rect (at 0 0 270) (size 1.98 3.96) (drill 1.32) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 24 /N_IN))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/TerminalBlock.3dshapes/TerminalBlock_Altech_AK300-3_P5.00mm.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module TerminalBlock:TerminalBlock_Altech_AK300-3_P5.00mm (layer F.Cu) (tedit 59FF0306) (tstamp 5DEF46B9)
(at 91.5 93 90)
(descr "Altech AK300 terminal block, pitch 5.0mm, 45 degree angled, see http://www.mouser.com/ds/2/16/PCBMETRC-24178.pdf")
(tags "Altech AK300 terminal block pitch 5.0mm")
(path /5D8B2F0A)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference J103 (at 5 -7.1 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value SSR_OUT (at 4.95 7.3 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 5 -2 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -2.65 -6.3) (end -2.65 6.3) (layer F.SilkS) (width 0.12))
(fp_line (start -2.65 6.3) (end 12.75 6.3) (layer F.SilkS) (width 0.12))
(fp_line (start 12.75 6.3) (end 12.75 5.35) (layer F.SilkS) (width 0.12))
(fp_line (start 12.75 5.35) (end 13.25 5.65) (layer F.SilkS) (width 0.12))
(fp_line (start 13.25 5.65) (end 13.25 3.65) (layer F.SilkS) (width 0.12))
(fp_line (start 13.25 3.65) (end 12.75 3.9) (layer F.SilkS) (width 0.12))
(fp_line (start 12.75 3.9) (end 12.75 -1.5) (layer F.SilkS) (width 0.12))
(fp_line (start 12.75 -1.5) (end 13.25 -1.25) (layer F.SilkS) (width 0.12))
(fp_line (start 13.25 -1.25) (end 13.25 -6.3) (layer F.SilkS) (width 0.12))
(fp_line (start 13.25 -6.3) (end -2.65 -6.3) (layer F.SilkS) (width 0.12))
(fp_line (start 12.66 -0.65) (end -2.52 -0.65) (layer F.Fab) (width 0.1))
(fp_line (start 8.02 3.99) (end 8.02 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 12.09 6.21) (end 7.58 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 7.58 -3.19) (end 12.6 -3.19) (layer F.Fab) (width 0.1))
(fp_line (start -2.58 -6.23) (end 12.66 -6.23) (layer F.Fab) (width 0.1))
(fp_line (start 8.42 -0.26) (end 11.72 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 8.04 -0.26) (end 8.42 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 12.1 -0.26) (end 11.72 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 8.57 -4.33) (end 11.62 -4.96) (layer F.Fab) (width 0.1))
(fp_line (start 8.44 -4.46) (end 11.49 -5.09) (layer F.Fab) (width 0.1))
(fp_line (start 12.1 -3.44) (end 8.04 -3.44) (layer F.Fab) (width 0.1))
(fp_line (start 12.1 -5.98) (end 12.1 -3.44) (layer F.Fab) (width 0.1))
(fp_line (start 8.04 -5.98) (end 12.1 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 8.04 -3.44) (end 8.04 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 -3.19) (end 12.66 -1.66) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 -0.65) (end 12.66 4.05) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 -1.66) (end 12.66 -0.65) (layer F.Fab) (width 0.1))
(fp_line (start 11.72 0.5) (end 11.34 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 8.42 0.5) (end 8.8 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 8.42 3.67) (end 8.42 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 11.72 3.67) (end 8.42 3.67) (layer F.Fab) (width 0.1))
(fp_line (start 11.72 3.67) (end 11.72 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 12.1 4.31) (end 12.1 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 8.04 4.31) (end 12.1 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 12.1 6.21) (end 12.66 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 12.1 -0.26) (end 12.1 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 8.04 6.21) (end 8.04 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 13.17 3.8) (end 13.17 5.45) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 4.05) (end 12.66 5.2) (layer F.Fab) (width 0.1))
(fp_line (start 13.17 3.8) (end 12.66 4.05) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 5.2) (end 12.66 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 13.17 5.45) (end 12.66 5.2) (layer F.Fab) (width 0.1))
(fp_line (start 13.17 -1.41) (end 12.66 -1.66) (layer F.Fab) (width 0.1))
(fp_line (start 13.17 -6.23) (end 13.17 -1.41) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 -6.23) (end 13.17 -6.23) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 -6.23) (end 12.66 -3.19) (layer F.Fab) (width 0.1))
(fp_line (start 8.8 2.53) (end 8.8 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 8.8 -0.26) (end 11.34 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 11.34 2.53) (end 11.34 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 8.8 2.53) (end 11.34 2.53) (layer F.Fab) (width 0.1))
(fp_line (start -1.28 2.53) (end 1.26 2.53) (layer F.Fab) (width 0.1))
(fp_line (start 1.26 2.53) (end 1.26 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start -1.28 -0.26) (end 1.26 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start -1.28 2.53) (end -1.28 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 3.72 2.53) (end 6.26 2.53) (layer F.Fab) (width 0.1))
(fp_line (start 6.26 2.53) (end 6.26 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 3.72 -0.26) (end 6.26 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 3.72 2.53) (end 3.72 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 8.02 5.2) (end 8.02 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 8.02 4.05) (end 8.02 5.2) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 6.21) (end 2.96 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 7.02 -0.26) (end 7.02 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 6.21) (end 7.02 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 7.02 6.21) (end 7.58 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 6.21) (end 2.02 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 6.21) (end 2.96 6.21) (layer F.Fab) (width 0.1))
(fp_line (start -2.05 -0.26) (end -2.05 4.31) (layer F.Fab) (width 0.1))
(fp_line (start -2.58 6.21) (end -2.05 6.21) (layer F.Fab) (width 0.1))
(fp_line (start -2.05 6.21) (end 2.02 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 4.31) (end 7.02 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 4.31) (end 2.96 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 7.02 4.31) (end 7.02 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 4.31) (end -2.05 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 4.31) (end 2.02 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start -2.05 4.31) (end -2.05 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 6.64 3.67) (end 6.64 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 6.64 3.67) (end 3.34 3.67) (layer F.Fab) (width 0.1))
(fp_line (start 3.34 3.67) (end 3.34 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 1.64 3.67) (end 1.64 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 1.64 3.67) (end -1.67 3.67) (layer F.Fab) (width 0.1))
(fp_line (start -1.67 3.67) (end -1.67 0.5) (layer F.Fab) (width 0.1))
(fp_line (start -1.67 0.5) (end -1.28 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 1.64 0.5) (end 1.26 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 3.34 0.5) (end 3.72 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 6.64 0.5) (end 6.26 0.5) (layer F.Fab) (width 0.1))
(fp_line (start -2.58 6.21) (end -2.58 -0.65) (layer F.Fab) (width 0.1))
(fp_line (start -2.58 -0.65) (end -2.58 -3.19) (layer F.Fab) (width 0.1))
(fp_line (start -2.58 -3.19) (end 7.58 -3.19) (layer F.Fab) (width 0.1))
(fp_line (start -2.58 -3.19) (end -2.58 -6.23) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 -3.44) (end 2.96 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 -5.98) (end 7.02 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 7.02 -5.98) (end 7.02 -3.44) (layer F.Fab) (width 0.1))
(fp_line (start 7.02 -3.44) (end 2.96 -3.44) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 -3.44) (end 2.02 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 -3.44) (end -2.05 -3.44) (layer F.Fab) (width 0.1))
(fp_line (start -2.05 -3.44) (end -2.05 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 -5.98) (end -2.05 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 3.36 -4.46) (end 6.41 -5.09) (layer F.Fab) (width 0.1))
(fp_line (start 3.49 -4.33) (end 6.54 -4.96) (layer F.Fab) (width 0.1))
(fp_line (start -1.64 -4.46) (end 1.41 -5.09) (layer F.Fab) (width 0.1))
(fp_line (start -1.51 -4.33) (end 1.53 -4.96) (layer F.Fab) (width 0.1))
(fp_line (start -2.05 -0.26) (end -1.67 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 -0.26) (end 1.64 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 1.64 -0.26) (end -1.67 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 7.02 -0.26) (end 6.64 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 -0.26) (end 3.34 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 3.34 -0.26) (end 6.64 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start -2.83 -6.48) (end 13.42 -6.48) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.83 -6.48) (end -2.83 6.46) (layer F.CrtYd) (width 0.05))
(fp_line (start 13.42 6.46) (end 13.42 -6.48) (layer F.CrtYd) (width 0.05))
(fp_line (start 13.42 6.46) (end -2.83 6.46) (layer F.CrtYd) (width 0.05))
(fp_arc (start 8.93 -4.66) (end 8.64 -4.14) (angle 104.2) (layer F.Fab) (width 0.1))
(fp_arc (start 10.04 -3.72) (end 8.44 -5.01) (angle 100) (layer F.Fab) (width 0.1))
(fp_arc (start 10.12 -6.08) (end 11.58 -4.13) (angle 75.5) (layer F.Fab) (width 0.1))
(fp_arc (start 11.09 -4.6) (end 11.59 -5.06) (angle 90.5) (layer F.Fab) (width 0.1))
(fp_arc (start 6.01 -4.6) (end 6.51 -5.06) (angle 90.5) (layer F.Fab) (width 0.1))
(fp_arc (start 5.04 -6.08) (end 6.5 -4.13) (angle 75.5) (layer F.Fab) (width 0.1))
(fp_arc (start 4.96 -3.72) (end 3.36 -5.01) (angle 100) (layer F.Fab) (width 0.1))
(fp_arc (start 3.85 -4.66) (end 3.56 -4.14) (angle 104.2) (layer F.Fab) (width 0.1))
(fp_arc (start 1 -4.6) (end 1.51 -5.06) (angle 90.5) (layer F.Fab) (width 0.1))
(fp_arc (start 0.04 -6.08) (end 1.5 -4.13) (angle 75.5) (layer F.Fab) (width 0.1))
(fp_arc (start -0.04 -3.72) (end -1.64 -5.01) (angle 100) (layer F.Fab) (width 0.1))
(fp_arc (start -1.16 -4.66) (end -1.44 -4.14) (angle 104.2) (layer F.Fab) (width 0.1))
(pad 1 thru_hole rect (at 0 0 90) (size 1.98 3.96) (drill 1.32) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 57 "Net-(J103-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 thru_hole oval (at 5 0 90) (size 1.98 3.96) (drill 1.32) (layers *.Cu *.Mask)
(net 1 Earth))
(pad 3 thru_hole oval (at 10 0 90) (size 1.98 3.96) (drill 1.32) (layers *.Cu *.Mask)
(net 3 +8V))
(model ${KISYS3DMOD}/TerminalBlock.3dshapes/TerminalBlock_Altech_AK300-3_P5.00mm.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical (layer F.Cu) (tedit 59FED5CC) (tstamp 5DEF1423)
(at 67.5 86.5)
(descr "Through hole straight pin header, 2x02, 2.54mm pitch, double rows")
(tags "Through hole pin header THT 2x02 2.54mm double row")
(path /5DB7154A)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference J105 (at -3.5 4) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value PT1000 (at 1.27 4.87) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 0 -1.27) (end 3.81 -1.27) (layer F.Fab) (width 0.1))
(fp_line (start 3.81 -1.27) (end 3.81 3.81) (layer F.Fab) (width 0.1))
(fp_line (start 3.81 3.81) (end -1.27 3.81) (layer F.Fab) (width 0.1))
(fp_line (start -1.27 3.81) (end -1.27 0) (layer F.Fab) (width 0.1))
(fp_line (start -1.27 0) (end 0 -1.27) (layer F.Fab) (width 0.1))
(fp_line (start -1.33 3.87) (end 3.87 3.87) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 1.27) (end -1.33 3.87) (layer F.SilkS) (width 0.12))
(fp_line (start 3.87 -1.33) (end 3.87 3.87) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 1.27) (end 1.27 1.27) (layer F.SilkS) (width 0.12))
(fp_line (start 1.27 1.27) (end 1.27 -1.33) (layer F.SilkS) (width 0.12))
(fp_line (start 1.27 -1.33) (end 3.87 -1.33) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 0) (end -1.33 -1.33) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 -1.33) (end 0 -1.33) (layer F.SilkS) (width 0.12))
(fp_line (start -1.8 -1.8) (end -1.8 4.35) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.8 4.35) (end 4.35 4.35) (layer F.CrtYd) (width 0.05))
(fp_line (start 4.35 4.35) (end 4.35 -1.8) (layer F.CrtYd) (width 0.05))
(fp_line (start 4.35 -1.8) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 1.27 1.27 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 10 /Frontend/FORCE+))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 thru_hole oval (at 2.54 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 12 /Frontend/SENS+))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 13 /Frontend/SENS-))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 4 thru_hole oval (at 2.54 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 11 /Frontend/FORCE-))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_2x02_P2.54mm_Vertical.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Connector:Tag-Connect_TC2050-IDC-FP_2x05_P1.27mm_Vertical (layer F.Cu) (tedit 5E0126DB) (tstamp 5DEF1467)
(at 40 72.5)
(descr "Tag-Connect programming header; http://www.tag-connect.com/Materials/TC2050-IDC-430%20Datasheet.pdf")
(tags "tag connect programming header pogo pins")
(path /5D77EC9D/5D75F6EB)
(attr virtual)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference J202 (at 5.5 0 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10PIN_JTAG_SWD (at 0 -4.8) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -3.175 1.27) (end -3.175 0.635) (layer F.SilkS) (width 0.12))
(fp_line (start -2.54 1.27) (end -3.175 1.27) (layer F.SilkS) (width 0.12))
(fp_line (start -5.5 4.25) (end -5.5 -4.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 4.75 4.25) (end -5.5 4.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 4.75 -4.25) (end 4.75 4.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -5.5 -4.25) (end 4.75 -4.25) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -2.54 0.635) (end -2.54 -0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start 2.54 0.635) (end -2.54 0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start 2.54 -0.635) (end 2.54 0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start -2.54 -0.635) (end 2.54 -0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start -2.54 0.635) (end -1.27 -0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start -2.54 0) (end -1.905 -0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start -1.905 0.635) (end -0.635 -0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start -1.27 0.635) (end 0 -0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start 1.905 0.635) (end 2.54 0) (layer Dwgs.User) (width 0.1))
(fp_text user KEEPOUT (at 0 0) (layer Cmts.User)
(effects (font (size 0.4 0.4) (thickness 0.07)))
)
(fp_line (start -0.635 0.635) (end 0.635 -0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start 0 0.635) (end 1.27 -0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start 0.635 0.635) (end 1.905 -0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start 1.27 0.635) (end 2.54 -0.635) (layer Dwgs.User) (width 0.1))
(pad "" np_thru_hole circle (at 3.81 -1.016) (size 0.9906 0.9906) (drill 0.9906) (layers *.Cu *.Mask))
(pad "" np_thru_hole circle (at 3.81 1.016) (size 0.9906 0.9906) (drill 0.9906) (layers *.Cu *.Mask))
(pad "" np_thru_hole circle (at -3.81 0) (size 0.9906 0.9906) (drill 0.9906) (layers *.Cu *.Mask))
(pad 1 connect circle (at -2.54 0.635) (size 0.7874 0.7874) (layers F.Cu F.Mask)
(net 4 +3V3))
(pad 2 connect circle (at -1.27 0.635) (size 0.7874 0.7874) (layers F.Cu F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 29 /Controller/SWDIO))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 connect circle (at 0 0.635) (size 0.7874 0.7874) (layers F.Cu F.Mask)
(net 2 GND) (zone_connect 2))
(pad 4 connect circle (at 1.27 0.635) (size 0.7874 0.7874) (layers F.Cu F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 30 /Controller/SWCLK))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 5 connect circle (at 2.54 0.635) (size 0.7874 0.7874) (layers F.Cu F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 75 "Net-(J202-Pad5)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 6 connect circle (at 2.54 -0.635) (size 0.7874 0.7874) (layers F.Cu F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 76 "Net-(J202-Pad6)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 7 connect circle (at 1.27 -0.635) (size 0.7874 0.7874) (layers F.Cu F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 31 /Controller/PC_RX))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 8 connect circle (at 0 -0.635) (size 0.7874 0.7874) (layers F.Cu F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 77 "Net-(J202-Pad8)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 9 connect circle (at -1.27 -0.635) (size 0.7874 0.7874) (layers F.Cu F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 32 /Controller/PC_TX))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 10 connect circle (at -2.54 -0.635) (size 0.7874 0.7874) (layers F.Cu F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 33 /Controller/~RST))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad "" np_thru_hole circle (at -3.81 -2.54) (size 2.3749 2.3749) (drill 2.3749) (layers *.Cu *.Mask))
(pad "" np_thru_hole circle (at -3.81 2.54) (size 2.3749 2.3749) (drill 2.3749) (layers *.Cu *.Mask))
(pad "" np_thru_hole circle (at 1.905 2.54) (size 2.3749 2.3749) (drill 2.3749) (layers *.Cu *.Mask))
(pad "" np_thru_hole circle (at 1.905 -2.54) (size 2.3749 2.3749) (drill 2.3749) (layers *.Cu *.Mask))
)
(module Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical (layer F.Cu) (tedit 59FED5CC) (tstamp 5DEF1497)
(at 32.5 90.34)
(descr "Through hole straight pin header, 1x05, 2.54mm pitch, single row")
(tags "Through hole pin header THT 1x05 2.54mm single row")
(path /5D77EC9D/5D93C5CB)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference J203 (at 0 -2.33) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value RotaryEncoder (at 0 12.49) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer F.Fab) (width 0.1))
(fp_line (start 1.27 -1.27) (end 1.27 11.43) (layer F.Fab) (width 0.1))
(fp_line (start 1.27 11.43) (end -1.27 11.43) (layer F.Fab) (width 0.1))
(fp_line (start -1.27 11.43) (end -1.27 -0.635) (layer F.Fab) (width 0.1))
(fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer F.Fab) (width 0.1))
(fp_line (start -1.33 11.49) (end 1.33 11.49) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 1.27) (end -1.33 11.49) (layer F.SilkS) (width 0.12))
(fp_line (start 1.33 1.27) (end 1.33 11.49) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 1.27) (end 1.33 1.27) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 0) (end -1.33 -1.33) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 -1.33) (end 0 -1.33) (layer F.SilkS) (width 0.12))
(fp_line (start -1.8 -1.8) (end -1.8 11.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.8 11.95) (end 1.8 11.95) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.8 11.95) (end 1.8 -1.8) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 5.08 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(pad 2 thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 9 /Controller/SW1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 6 /Controller/ENC1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 4 thru_hole oval (at 0 7.62) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(pad 5 thru_hole oval (at 0 10.16) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 7 /Controller/ENC2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x05_P2.54mm_Vertical.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5DEF14A8)
(at 61 103)
(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
(tags "inductor handsolder")
(path /5D77EC9D/5D7C535D)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference L201 (at -3.5 0) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100nH (at 0 1.65) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)))
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12))
(fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12))
(fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1))
(fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1))
(fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1))
(fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 1.025 0) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
(net 4 +3V3))
(pad 1 smd roundrect (at -1.025 0) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 47 /Controller/VDDA))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Inductor_SMD.3dshapes/L_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical (layer F.Cu) (tedit 59FED5CC) (tstamp 5DEF14CF)
(at 66.5 74 180)
(descr "Through hole straight pin header, 1x02, 2.54mm pitch, single row")
(tags "Through hole pin header THT 1x02 2.54mm single row")
(path /5D891662)
(fp_text reference LS101 (at 2 1.5 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value Buzzer (at 0 4.87) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer F.Fab) (width 0.1))
(fp_line (start 1.27 -1.27) (end 1.27 3.81) (layer F.Fab) (width 0.1))
(fp_line (start 1.27 3.81) (end -1.27 3.81) (layer F.Fab) (width 0.1))
(fp_line (start -1.27 3.81) (end -1.27 -0.635) (layer F.Fab) (width 0.1))
(fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer F.Fab) (width 0.1))
(fp_line (start -1.33 3.87) (end 1.33 3.87) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 1.27) (end -1.33 3.87) (layer F.SilkS) (width 0.12))
(fp_line (start 1.33 1.27) (end 1.33 3.87) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 1.27) (end 1.33 1.27) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 0) (end -1.33 -1.33) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 -1.33) (end 0 -1.33) (layer F.SilkS) (width 0.12))
(fp_line (start -1.8 -1.8) (end -1.8 4.35) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.8 4.35) (end 1.8 4.35) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.8 4.35) (end 1.8 -1.8) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 1.27 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 thru_hole rect (at 0 0 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 34 "Net-(LS101-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 thru_hole oval (at 0 2.54 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 5 +5V))
(model ${KISYS3DMOD}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x02_P2.54mm_Vertical.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Package_TO_SOT_SMD:SOT-23 (layer B.Cu) (tedit 5A02FF57) (tstamp 5DEF14E4)
(at 87 93)
(descr "SOT-23, Standard")
(tags SOT-23)
(path /5D881694)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference Q102 (at -2.5 0 90) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value BSS123 (at 0 -2.5) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text user %R (at 0 0 -90) (layer B.Fab)
(effects (font (size 0.5 0.5) (thickness 0.075)) (justify mirror))
)
(fp_line (start -0.7 0.95) (end -0.7 -1.5) (layer B.Fab) (width 0.1))
(fp_line (start -0.15 1.52) (end 0.7 1.52) (layer B.Fab) (width 0.1))
(fp_line (start -0.7 0.95) (end -0.15 1.52) (layer B.Fab) (width 0.1))
(fp_line (start 0.7 1.52) (end 0.7 -1.52) (layer B.Fab) (width 0.1))
(fp_line (start -0.7 -1.52) (end 0.7 -1.52) (layer B.Fab) (width 0.1))
(fp_line (start 0.76 -1.58) (end 0.76 -0.65) (layer B.SilkS) (width 0.12))
(fp_line (start 0.76 1.58) (end 0.76 0.65) (layer B.SilkS) (width 0.12))
(fp_line (start -1.7 1.75) (end 1.7 1.75) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.7 1.75) (end 1.7 -1.75) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.7 -1.75) (end -1.7 -1.75) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.7 -1.75) (end -1.7 1.75) (layer B.CrtYd) (width 0.05))
(fp_line (start 0.76 1.58) (end -1.4 1.58) (layer B.SilkS) (width 0.12))
(fp_line (start 0.76 -1.58) (end -0.7 -1.58) (layer B.SilkS) (width 0.12))
(pad 1 smd rect (at -1 0.95) (size 0.9 0.8) (layers B.Cu B.Paste B.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 50 "Net-(C102-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd rect (at -1 -0.95) (size 0.9 0.8) (layers B.Cu B.Paste B.Mask)
(net 2 GND))
(pad 3 smd rect (at 1 0) (size 0.9 0.8) (layers B.Cu B.Paste B.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 57 "Net-(J103-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Package_TO_SOT_SMD:SOT-23 (layer F.Cu) (tedit 5A02FF57) (tstamp 5DEF14F9)
(at 67 78.5 90)
(descr "SOT-23, Standard")
(tags SOT-23)
(path /5D8AFFC1)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference Q101 (at 0 -2.5 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value BSS123 (at 0 2.5 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 0.76 1.58) (end -0.7 1.58) (layer F.SilkS) (width 0.12))
(fp_line (start 0.76 -1.58) (end -1.4 -1.58) (layer F.SilkS) (width 0.12))
(fp_line (start -1.7 1.75) (end -1.7 -1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.7 1.75) (end -1.7 1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.7 -1.75) (end 1.7 1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.7 -1.75) (end 1.7 -1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start 0.76 -1.58) (end 0.76 -0.65) (layer F.SilkS) (width 0.12))
(fp_line (start 0.76 1.58) (end 0.76 0.65) (layer F.SilkS) (width 0.12))
(fp_line (start -0.7 1.52) (end 0.7 1.52) (layer F.Fab) (width 0.1))
(fp_line (start 0.7 -1.52) (end 0.7 1.52) (layer F.Fab) (width 0.1))
(fp_line (start -0.7 -0.95) (end -0.15 -1.52) (layer F.Fab) (width 0.1))
(fp_line (start -0.15 -1.52) (end 0.7 -1.52) (layer F.Fab) (width 0.1))
(fp_line (start -0.7 -0.95) (end -0.7 1.5) (layer F.Fab) (width 0.1))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.075)))
)
(pad 3 smd rect (at 1 0 90) (size 0.9 0.8) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 34 "Net-(LS101-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd rect (at -1 0.95 90) (size 0.9 0.8) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad 1 smd rect (at -1 -0.95 90) (size 0.9 0.8) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 58 "Net-(Q101-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF150A)
(at 22.5 20.5 90)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D70EFF3)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference R106 (at 0 -1.43 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 1M (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 1 Earth))
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5DEF151B)
(at 85.5 98)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D88AD1A)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference R103 (at 3.27 0.05) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 10k (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 50 "Net-(C102-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 43 /OUT0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF152C)
(at 66 82 90)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8BE522)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference R101 (at -1 -1.43 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10k (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 46 /OUT1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 58 "Net-(Q101-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E01540C)
(at 25 49.5)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8F3F07)
(attr smd)
(fp_text reference R104 (at 0.07 -1.5) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 1k5 (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 20 "Net-(D102-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF154E)
(at 29 54.5)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8F3AEF)
(attr smd)
(fp_text reference R105 (at 0.5 -1.5) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 1k5 (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 55 "Net-(D103-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5DEF155F)
(at 87.5 88 270)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8FC0CC)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference R102 (at 0 1.43 90) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 22k (at 0 -1.43 90) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 3 +8V))
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 57 "Net-(J103-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5DEF1570)
(at 48.5 105.5)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5D855B79)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R201 (at 0 1.43) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 1M (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 64 "Net-(C207-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 63 "Net-(C206-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF15A3)
(at 32 69.5 180)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5DDD574C)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R204 (at 0 10) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10k (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 15 /Controller/SDIO_D0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF15B4)
(at 32 71 180)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5DDD5A92)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R205 (at 0 10.25) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10k (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 16 /Controller/SDIO_CLK))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF15C5)
(at 32 74 180)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5DDD5F3A)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R206 (at 0 10.75) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10k (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 17 /Controller/SDIO_CMD))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF15D6)
(at 32 75.5 180)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5DDD7B84)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R207 (at 0 11) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10k (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 18 /Controller/SDIO_D3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF15E7)
(at 32 77 180)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5DDD7F38)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R208 (at 0 11.25) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10k (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 19 /Controller/SDIO_D2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5DEF15F8)
(at 38.5 69.2125 270)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5D7B48C6)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R209 (at 3.2875 0 90) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 10k (at 0 -1.43 90) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 33 /Controller/~RST))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF1609)
(at 37.5 78)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5DE7DF04)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R210 (at 3.5 0) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10k (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 29 /Controller/SWDIO))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF161A)
(at 37.5 80)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5DE7B2A7)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R211 (at 3.5 0) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10k (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 30 /Controller/SWCLK))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5DEF163C)
(at 30 93.5)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5D7D2B75)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R212 (at -0.5 3.5) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 10k (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 6 /Controller/ENC1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5DEF164D)
(at 30 102.5)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5D7D322F)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R213 (at -0.5 1.43) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 10k (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 7 /Controller/ENC2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5E01C7D3)
(at 53 98.5 90)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5D9B187D)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R308 (at 3.5 0 270) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(fp_text value 0 (at 0 -1.43 270) (layer B.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text user %R (at 0 0 270) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 68 "Net-(C303-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 8 /Controller/VREF))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Potentiometer_THT:Potentiometer_Bourns_3266X_Horizontal (layer F.Cu) (tedit 5A3D4994) (tstamp 5DEF177D)
(at 23.5 59)
(descr "Potentiometer, horizontal, Bourns 3266X, https://www.bourns.com/docs/Product-Datasheets/3266.pdf")
(tags "Potentiometer horizontal Bourns 3266X")
(path /5D77EC9D/5D944119)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference RV201 (at -2.5 4.5 180) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10k (at -3.3 4.73) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -5.895 -1.02) (end -5.895 3.48) (layer F.Fab) (width 0.1))
(fp_line (start -5.895 3.48) (end 0.815 3.48) (layer F.Fab) (width 0.1))
(fp_line (start 0.815 3.48) (end 0.815 -1.02) (layer F.Fab) (width 0.1))
(fp_line (start 0.815 -1.02) (end -5.895 -1.02) (layer F.Fab) (width 0.1))
(fp_line (start -7.415 1.32) (end -7.415 3.1) (layer F.Fab) (width 0.1))
(fp_line (start -7.415 3.1) (end -5.895 3.1) (layer F.Fab) (width 0.1))
(fp_line (start -5.895 3.1) (end -5.895 1.32) (layer F.Fab) (width 0.1))
(fp_line (start -5.895 1.32) (end -7.415 1.32) (layer F.Fab) (width 0.1))
(fp_line (start -7.415 2.21) (end -6.655 2.21) (layer F.Fab) (width 0.1))
(fp_line (start -6.015 -1.14) (end 0.935 -1.14) (layer F.SilkS) (width 0.12))
(fp_line (start -6.015 3.6) (end 0.935 3.6) (layer F.SilkS) (width 0.12))
(fp_line (start -6.015 -1.14) (end -6.015 -0.495) (layer F.SilkS) (width 0.12))
(fp_line (start -6.015 0.495) (end -6.015 3.6) (layer F.SilkS) (width 0.12))
(fp_line (start 0.935 -1.14) (end 0.935 -0.495) (layer F.SilkS) (width 0.12))
(fp_line (start 0.935 0.495) (end 0.935 3.6) (layer F.SilkS) (width 0.12))
(fp_line (start -7.535 1.2) (end -6.016 1.2) (layer F.SilkS) (width 0.12))
(fp_line (start -7.535 3.22) (end -6.016 3.22) (layer F.SilkS) (width 0.12))
(fp_line (start -7.535 1.2) (end -7.535 3.22) (layer F.SilkS) (width 0.12))
(fp_line (start -6.016 1.2) (end -6.016 3.22) (layer F.SilkS) (width 0.12))
(fp_line (start -7.535 2.21) (end -6.776 2.21) (layer F.SilkS) (width 0.12))
(fp_line (start -7.7 -1.3) (end -7.7 3.75) (layer F.CrtYd) (width 0.05))
(fp_line (start -7.7 3.75) (end 1.1 3.75) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.1 3.75) (end 1.1 -1.3) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.1 -1.3) (end -7.7 -1.3) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at -2.54 1.23) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 thru_hole circle (at 0 0) (size 1.44 1.44) (drill 0.8) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 66 "Net-(C212-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 thru_hole circle (at -2.54 2.54) (size 1.44 1.44) (drill 0.8) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 35 /Controller/LCD_VO))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 thru_hole circle (at -5.08 0) (size 1.44 1.44) (drill 0.8) (layers *.Cu *.Mask)
(net 2 GND))
(model ${KISYS3DMOD}/Potentiometer_THT.3dshapes/Potentiometer_Bourns_3266X_Horizontal.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Package_TO_SOT_SMD:TO-252-2 (layer F.Cu) (tedit 5A70A390) (tstamp 5DEF17B3)
(at 35 49 270)
(descr "TO-252 / DPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO252/PG-TO252-3-1/")
(tags "DPAK TO-252 DPAK-3 TO-252-3 SOT-428")
(path /5D71A1E5)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference U103 (at -3.85 -4.2 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value AZ1117-3.3 (at 0 4.5 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 5.55 -3.5) (end -5.55 -3.5) (layer F.CrtYd) (width 0.05))
(fp_line (start 5.55 3.5) (end 5.55 -3.5) (layer F.CrtYd) (width 0.05))
(fp_line (start -5.55 3.5) (end 5.55 3.5) (layer F.CrtYd) (width 0.05))
(fp_line (start -5.55 -3.5) (end -5.55 3.5) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.47 3.18) (end -3.57 3.18) (layer F.SilkS) (width 0.12))
(fp_line (start -2.47 3.45) (end -2.47 3.18) (layer F.SilkS) (width 0.12))
(fp_line (start -0.97 3.45) (end -2.47 3.45) (layer F.SilkS) (width 0.12))
(fp_line (start -2.47 -3.18) (end -5.3 -3.18) (layer F.SilkS) (width 0.12))
(fp_line (start -2.47 -3.45) (end -2.47 -3.18) (layer F.SilkS) (width 0.12))
(fp_line (start -0.97 -3.45) (end -2.47 -3.45) (layer F.SilkS) (width 0.12))
(fp_line (start -4.97 2.655) (end -2.27 2.655) (layer F.Fab) (width 0.1))
(fp_line (start -4.97 1.905) (end -4.97 2.655) (layer F.Fab) (width 0.1))
(fp_line (start -2.27 1.905) (end -4.97 1.905) (layer F.Fab) (width 0.1))
(fp_line (start -4.97 -1.905) (end -2.27 -1.905) (layer F.Fab) (width 0.1))
(fp_line (start -4.97 -2.655) (end -4.97 -1.905) (layer F.Fab) (width 0.1))
(fp_line (start -1.865 -2.655) (end -4.97 -2.655) (layer F.Fab) (width 0.1))
(fp_line (start -1.27 -3.25) (end 3.95 -3.25) (layer F.Fab) (width 0.1))
(fp_line (start -2.27 -2.25) (end -1.27 -3.25) (layer F.Fab) (width 0.1))
(fp_line (start -2.27 3.25) (end -2.27 -2.25) (layer F.Fab) (width 0.1))
(fp_line (start 3.95 3.25) (end -2.27 3.25) (layer F.Fab) (width 0.1))
(fp_line (start 3.95 -3.25) (end 3.95 3.25) (layer F.Fab) (width 0.1))
(fp_line (start 4.95 2.7) (end 3.95 2.7) (layer F.Fab) (width 0.1))
(fp_line (start 4.95 -2.7) (end 4.95 2.7) (layer F.Fab) (width 0.1))
(fp_line (start 3.95 -2.7) (end 4.95 -2.7) (layer F.Fab) (width 0.1))
(pad "" smd rect (at 0.425 1.525 270) (size 3.05 2.75) (layers F.Paste))
(pad "" smd rect (at 3.775 -1.525 270) (size 3.05 2.75) (layers F.Paste))
(pad "" smd rect (at 0.425 -1.525 270) (size 3.05 2.75) (layers F.Paste))
(pad "" smd rect (at 3.775 1.525 270) (size 3.05 2.75) (layers F.Paste))
(pad 2 smd rect (at 2.1 0 270) (size 6.4 5.8) (layers F.Cu F.Mask)
(net 4 +3V3))
(pad 3 smd rect (at -4.2 2.28 270) (size 2.2 1.2) (layers F.Cu F.Paste F.Mask)
(net 3 +8V))
(pad 1 smd rect (at -4.2 -2.28 270) (size 2.2 1.2) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/TO-252-2.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Package_TO_SOT_SMD:TO-252-2 (layer F.Cu) (tedit 5A70A390) (tstamp 5DEF17D7)
(at 78.5 66 90)
(descr "TO-252 / DPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO252/PG-TO252-3-1/")
(tags "DPAK TO-252 DPAK-3 TO-252-3 SOT-428")
(path /5D982620)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference U104 (at 2.5 -4 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value AZ1117-5.0 (at 0 4.5 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 3.95 -2.7) (end 4.95 -2.7) (layer F.Fab) (width 0.1))
(fp_line (start 4.95 -2.7) (end 4.95 2.7) (layer F.Fab) (width 0.1))
(fp_line (start 4.95 2.7) (end 3.95 2.7) (layer F.Fab) (width 0.1))
(fp_line (start 3.95 -3.25) (end 3.95 3.25) (layer F.Fab) (width 0.1))
(fp_line (start 3.95 3.25) (end -2.27 3.25) (layer F.Fab) (width 0.1))
(fp_line (start -2.27 3.25) (end -2.27 -2.25) (layer F.Fab) (width 0.1))
(fp_line (start -2.27 -2.25) (end -1.27 -3.25) (layer F.Fab) (width 0.1))
(fp_line (start -1.27 -3.25) (end 3.95 -3.25) (layer F.Fab) (width 0.1))
(fp_line (start -1.865 -2.655) (end -4.97 -2.655) (layer F.Fab) (width 0.1))
(fp_line (start -4.97 -2.655) (end -4.97 -1.905) (layer F.Fab) (width 0.1))
(fp_line (start -4.97 -1.905) (end -2.27 -1.905) (layer F.Fab) (width 0.1))
(fp_line (start -2.27 1.905) (end -4.97 1.905) (layer F.Fab) (width 0.1))
(fp_line (start -4.97 1.905) (end -4.97 2.655) (layer F.Fab) (width 0.1))
(fp_line (start -4.97 2.655) (end -2.27 2.655) (layer F.Fab) (width 0.1))
(fp_line (start -0.97 -3.45) (end -2.47 -3.45) (layer F.SilkS) (width 0.12))
(fp_line (start -2.47 -3.45) (end -2.47 -3.18) (layer F.SilkS) (width 0.12))
(fp_line (start -2.47 -3.18) (end -5.3 -3.18) (layer F.SilkS) (width 0.12))
(fp_line (start -0.97 3.45) (end -2.47 3.45) (layer F.SilkS) (width 0.12))
(fp_line (start -2.47 3.45) (end -2.47 3.18) (layer F.SilkS) (width 0.12))
(fp_line (start -2.47 3.18) (end -3.57 3.18) (layer F.SilkS) (width 0.12))
(fp_line (start -5.55 -3.5) (end -5.55 3.5) (layer F.CrtYd) (width 0.05))
(fp_line (start -5.55 3.5) (end 5.55 3.5) (layer F.CrtYd) (width 0.05))
(fp_line (start 5.55 3.5) (end 5.55 -3.5) (layer F.CrtYd) (width 0.05))
(fp_line (start 5.55 -3.5) (end -5.55 -3.5) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 smd rect (at -4.2 -2.28 90) (size 2.2 1.2) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad 3 smd rect (at -4.2 2.28 90) (size 2.2 1.2) (layers F.Cu F.Paste F.Mask)
(net 3 +8V))
(pad 2 smd rect (at 2.1 0 90) (size 6.4 5.8) (layers F.Cu F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 48 +5VL))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad "" smd rect (at 3.775 1.525 90) (size 3.05 2.75) (layers F.Paste))
(pad "" smd rect (at 0.425 -1.525 90) (size 3.05 2.75) (layers F.Paste))
(pad "" smd rect (at 3.775 -1.525 90) (size 3.05 2.75) (layers F.Paste))
(pad "" smd rect (at 0.425 1.525 90) (size 3.05 2.75) (layers F.Paste))
(model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/TO-252-2.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm (layer F.Cu) (tedit 5C97300E) (tstamp 5DEF1826)
(at 57.5 75.5 180)
(descr "SOIC, 20 Pin (JEDEC MS-013AC, https://www.analog.com/media/en/package-pcb-resources/package/233848rw_20.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py")
(tags "SOIC SO")
(path /5D77EC9D/5D90FF0A)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference U201 (at 0 -7.35) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 74HCT244 (at 0 7.35) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 0 6.51) (end 3.86 6.51) (layer F.SilkS) (width 0.12))
(fp_line (start 3.86 6.51) (end 3.86 6.275) (layer F.SilkS) (width 0.12))
(fp_line (start 0 6.51) (end -3.86 6.51) (layer F.SilkS) (width 0.12))
(fp_line (start -3.86 6.51) (end -3.86 6.275) (layer F.SilkS) (width 0.12))
(fp_line (start 0 -6.51) (end 3.86 -6.51) (layer F.SilkS) (width 0.12))
(fp_line (start 3.86 -6.51) (end 3.86 -6.275) (layer F.SilkS) (width 0.12))
(fp_line (start 0 -6.51) (end -3.86 -6.51) (layer F.SilkS) (width 0.12))
(fp_line (start -3.86 -6.51) (end -3.86 -6.275) (layer F.SilkS) (width 0.12))
(fp_line (start -3.86 -6.275) (end -5.675 -6.275) (layer F.SilkS) (width 0.12))
(fp_line (start -2.75 -6.4) (end 3.75 -6.4) (layer F.Fab) (width 0.1))
(fp_line (start 3.75 -6.4) (end 3.75 6.4) (layer F.Fab) (width 0.1))
(fp_line (start 3.75 6.4) (end -3.75 6.4) (layer F.Fab) (width 0.1))
(fp_line (start -3.75 6.4) (end -3.75 -5.4) (layer F.Fab) (width 0.1))
(fp_line (start -3.75 -5.4) (end -2.75 -6.4) (layer F.Fab) (width 0.1))
(fp_line (start -5.93 -6.65) (end -5.93 6.65) (layer F.CrtYd) (width 0.05))
(fp_line (start -5.93 6.65) (end 5.93 6.65) (layer F.CrtYd) (width 0.05))
(fp_line (start 5.93 6.65) (end 5.93 -6.65) (layer F.CrtYd) (width 0.05))
(fp_line (start 5.93 -6.65) (end -5.93 -6.65) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 smd roundrect (at -4.65 -5.715 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 2 smd roundrect (at -4.65 -4.445 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 80 "Net-(U201-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 smd roundrect (at -4.65 -3.175 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 40 /Controller/LCD_D2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 4 smd roundrect (at -4.65 -1.905 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 81 "Net-(U201-Pad4)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 5 smd roundrect (at -4.65 -0.635 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 38 /Controller/LCD_D3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 6 smd roundrect (at -4.65 0.635 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 82 "Net-(U201-Pad6)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 7 smd roundrect (at -4.65 1.905 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 83 "Net-(U201-Pad7)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 8 smd roundrect (at -4.65 3.175 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 84 "Net-(U201-Pad8)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 9 smd roundrect (at -4.65 4.445 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 85 "Net-(U201-Pad9)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 10 smd roundrect (at -4.65 5.715 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 11 smd roundrect (at 4.65 5.715 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 12 smd roundrect (at 4.65 4.445 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 41 /Controller/LCD_D1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 13 smd roundrect (at 4.65 3.175 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 14 smd roundrect (at 4.65 1.905 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 39 /Controller/LCD_D0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 15 smd roundrect (at 4.65 0.635 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 86 "Net-(U201-Pad15)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 16 smd roundrect (at 4.65 -0.635 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 37 /Controller/LCD_EN))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 17 smd roundrect (at 4.65 -1.905 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 87 "Net-(U201-Pad17)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 18 smd roundrect (at 4.65 -3.175 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 36 /Controller/LCD_RS))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 19 smd roundrect (at 4.65 -4.445 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 20 smd roundrect (at 4.65 -5.715 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 66 "Net-(C212-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Package_SO.3dshapes/SOIC-20W_7.5x12.8mm_P1.27mm.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Crystal:Crystal_SMD_Abracon_ABM3B-4Pin_5.0x3.2mm (layer F.Cu) (tedit 5A0FD1B2) (tstamp 5DEF1941)
(at 48.5 105.5 180)
(descr "Abracon Miniature Ceramic Smd Crystal ABM3B http://www.abracon.com/Resonators/abm3b.pdf, 5.0x3.2mm^2 package")
(tags "SMD SMT crystal")
(path /5D77EC9D/5D80C867)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference Y201 (at 0 -2.8) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value "ABM3B 8MHz" (at 0 2.8) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -2.3 -1.6) (end 2.3 -1.6) (layer F.Fab) (width 0.1))
(fp_line (start 2.3 -1.6) (end 2.5 -1.4) (layer F.Fab) (width 0.1))
(fp_line (start 2.5 -1.4) (end 2.5 1.4) (layer F.Fab) (width 0.1))
(fp_line (start 2.5 1.4) (end 2.3 1.6) (layer F.Fab) (width 0.1))
(fp_line (start 2.3 1.6) (end -2.3 1.6) (layer F.Fab) (width 0.1))
(fp_line (start -2.3 1.6) (end -2.5 1.4) (layer F.Fab) (width 0.1))
(fp_line (start -2.5 1.4) (end -2.5 -1.4) (layer F.Fab) (width 0.1))
(fp_line (start -2.5 -1.4) (end -2.3 -1.6) (layer F.Fab) (width 0.1))
(fp_line (start -2.5 0.6) (end -1.5 1.6) (layer F.Fab) (width 0.1))
(fp_line (start -3.1 0.4) (end -2.7 0.4) (layer F.SilkS) (width 0.12))
(fp_line (start -2.7 0.4) (end -2.7 -0.4) (layer F.SilkS) (width 0.12))
(fp_line (start 2.7 -0.4) (end 2.7 0.4) (layer F.SilkS) (width 0.12))
(fp_line (start -0.9 -1.8) (end 0.9 -1.8) (layer F.SilkS) (width 0.12))
(fp_line (start 0.9 1.8) (end -0.9 1.8) (layer F.SilkS) (width 0.12))
(fp_line (start -0.9 1.8) (end -0.9 2.04) (layer F.SilkS) (width 0.12))
(fp_line (start -3.2 -2.1) (end -3.2 2.1) (layer F.CrtYd) (width 0.05))
(fp_line (start -3.2 2.1) (end 3.2 2.1) (layer F.CrtYd) (width 0.05))
(fp_line (start 3.2 2.1) (end 3.2 -2.1) (layer F.CrtYd) (width 0.05))
(fp_line (start 3.2 -2.1) (end -3.2 -2.1) (layer F.CrtYd) (width 0.05))
(fp_circle (center 0 0) (end 0.5 0) (layer F.Adhes) (width 0.1))
(fp_circle (center 0 0) (end 0.416667 0) (layer F.Adhes) (width 0.166667))
(fp_circle (center 0 0) (end 0.266667 0) (layer F.Adhes) (width 0.166667))
(fp_circle (center 0 0) (end 0.116667 0) (layer F.Adhes) (width 0.233333))
(pad 1 smd rect (at -2 1.2 180) (size 1.8 1.2) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 64 "Net-(C207-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd rect (at 2 1.2 180) (size 1.8 1.2) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad 3 smd rect (at 2 -1.2 180) (size 1.8 1.2) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 63 "Net-(C206-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 4 smd rect (at -2 -1.2 180) (size 1.8 1.2) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(model ${KISYS3DMOD}/Crystal.3dshapes/Crystal_SMD_Abracon_ABM3B-4Pin_5.0x3.2mm.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Connector_Multicomp:Multicomp_MC9A22-1034_2x05_P2.54mm_Horizontal (layer F.Cu) (tedit 5A16A5B3) (tstamp 5E016E79)
(at 26.5 100.5 90)
(descr http://www.farnell.com/cad/360651.pdf)
(tags "connector multicomp MC9A MC9A22")
(path /5E023D81)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference J102 (at -3 -3.5 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value DIGIO (at 5.08 -5.5 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 5.08 -1.27 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -5.07 -4.34) (end -5.07 -13.24) (layer F.SilkS) (width 0.15))
(fp_line (start -5.07 -13.24) (end 15.23 -13.24) (layer F.SilkS) (width 0.15))
(fp_line (start 15.23 -13.24) (end 15.23 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 15.23 -4.34) (end -5.07 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 2.855 -13.24) (end 2.855 -6.64) (layer F.SilkS) (width 0.15))
(fp_line (start 2.855 -6.64) (end 7.305 -6.64) (layer F.SilkS) (width 0.15))
(fp_line (start 7.305 -6.64) (end 7.305 -13.24) (layer F.SilkS) (width 0.15))
(fp_line (start 4.68 -6.64) (end 4.68 -12.84) (layer F.SilkS) (width 0.15))
(fp_line (start 4.68 -12.84) (end 4.88 -13.04) (layer F.SilkS) (width 0.15))
(fp_line (start 4.88 -13.04) (end 5.28 -13.04) (layer F.SilkS) (width 0.15))
(fp_line (start 5.28 -13.04) (end 5.48 -12.84) (layer F.SilkS) (width 0.15))
(fp_line (start 5.48 -12.84) (end 5.48 -6.64) (layer F.SilkS) (width 0.15))
(fp_line (start -1 -12.5) (end 1 -12.5) (layer F.SilkS) (width 0.15))
(fp_line (start 1 -12.5) (end 0 -11) (layer F.SilkS) (width 0.15))
(fp_line (start 0 -11) (end -1 -12.5) (layer F.SilkS) (width 0.15))
(fp_line (start -5.55 1.35) (end -5.55 -13.75) (layer F.CrtYd) (width 0.05))
(fp_line (start -5.55 -13.75) (end 15.75 -13.75) (layer F.CrtYd) (width 0.05))
(fp_line (start 15.75 -13.75) (end 15.75 1.35) (layer F.CrtYd) (width 0.05))
(fp_line (start 15.75 1.35) (end -5.55 1.35) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.4 -1.1) (end -0.4 -1.44) (layer F.SilkS) (width 0.15))
(fp_line (start 0.4 -1.1) (end 0.4 -1.44) (layer F.SilkS) (width 0.15))
(fp_line (start -0.4 -3.64) (end -0.4 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 0.4 -3.64) (end 0.4 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 2.14 -1.1) (end 2.14 -1.44) (layer F.SilkS) (width 0.15))
(fp_line (start 2.94 -1.1) (end 2.94 -1.44) (layer F.SilkS) (width 0.15))
(fp_line (start 2.14 -3.64) (end 2.14 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 2.94 -3.64) (end 2.94 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 4.68 -1.1) (end 4.68 -1.44) (layer F.SilkS) (width 0.15))
(fp_line (start 5.48 -1.1) (end 5.48 -1.44) (layer F.SilkS) (width 0.15))
(fp_line (start 4.68 -3.64) (end 4.68 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 5.48 -3.64) (end 5.48 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 7.22 -1.1) (end 7.22 -1.44) (layer F.SilkS) (width 0.15))
(fp_line (start 8.02 -1.1) (end 8.02 -1.44) (layer F.SilkS) (width 0.15))
(fp_line (start 7.22 -3.64) (end 7.22 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 8.02 -3.64) (end 8.02 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 9.76 -1.1) (end 9.76 -1.44) (layer F.SilkS) (width 0.15))
(fp_line (start 10.56 -1.1) (end 10.56 -1.44) (layer F.SilkS) (width 0.15))
(fp_line (start 9.76 -3.64) (end 9.76 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 10.56 -3.64) (end 10.56 -4.34) (layer F.SilkS) (width 0.15))
(pad 1 thru_hole rect (at 0 0 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(pad 2 thru_hole circle (at 0 -2.54 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 28 /DIGIO0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 thru_hole circle (at 2.54 0 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(pad 4 thru_hole circle (at 2.54 -2.54 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 27 /DIGIO1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 5 thru_hole circle (at 5.08 0 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(pad 6 thru_hole circle (at 5.08 -2.54 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 26 /DIGIO2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 7 thru_hole circle (at 7.62 0 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(pad 8 thru_hole circle (at 7.62 -2.54 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 25 /DIGIO3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 9 thru_hole circle (at 10.16 0 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(pad 10 thru_hole circle (at 10.16 -2.54 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 4 +3V3))
(model ${KISYS3DMOD}/Connector_Multicomp.3dshapes/Multicomp_MC9A22-1034_2x05_P2.54mm_Horizontal.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical (layer F.Cu) (tedit 59FED5CC) (tstamp 5E016EC3)
(at 24 30.5 90)
(descr "Through hole straight pin header, 1x02, 2.54mm pitch, single row")
(tags "Through hole pin header THT 1x02 2.54mm single row")
(path /5E336524)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference J104 (at 2 1.5 180) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 8V-dev (at 0 4.87 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer F.Fab) (width 0.1))
(fp_line (start 1.27 -1.27) (end 1.27 3.81) (layer F.Fab) (width 0.1))
(fp_line (start 1.27 3.81) (end -1.27 3.81) (layer F.Fab) (width 0.1))
(fp_line (start -1.27 3.81) (end -1.27 -0.635) (layer F.Fab) (width 0.1))
(fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer F.Fab) (width 0.1))
(fp_line (start -1.33 3.87) (end 1.33 3.87) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 1.27) (end -1.33 3.87) (layer F.SilkS) (width 0.12))
(fp_line (start 1.33 1.27) (end 1.33 3.87) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 1.27) (end 1.33 1.27) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 0) (end -1.33 -1.33) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 -1.33) (end 0 -1.33) (layer F.SilkS) (width 0.12))
(fp_line (start -1.8 -1.8) (end -1.8 4.35) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.8 4.35) (end 1.8 4.35) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.8 4.35) (end 1.8 -1.8) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 1.27) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 thru_hole rect (at 0 0 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 3 +8V))
(pad 2 thru_hole oval (at 0 2.54 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(model ${KISYS3DMOD}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x02_P2.54mm_Vertical.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E034027)
(at 32 68 180)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5DDD51E7)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R203 (at 0 9.75) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10k (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 14 /Controller/SDIO_D1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5E03D0D0)
(at 45 96.5 180)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5E579D23)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C202 (at 0 1.43) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 100n (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5E028C5B)
(at 62.25 91.75 270)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5E096137)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C312 (at 0 1.43 270) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 100n (at 0 -1.43 270) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 270) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5E028C6C)
(at 66.5 93 270)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E0B45CD)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R313 (at -0.23 -1.43 90) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 4k7 (at 0 -1.43 90) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 42 /Controller/FRONTEND_TEMP))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Package_TO_SOT_THT:TO-92_Inline (layer F.Cu) (tedit 5A1DD157) (tstamp 5E028C90)
(at 64.25 95 90)
(descr "TO-92 leads in-line, narrow, oval pads, drill 0.75mm (see NXP sot054_po.pdf)")
(tags "to-92 sc-43 sc-43a sot54 PA33 transistor")
(path /5D8C5188/5E08DC55)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference U306 (at 1.27 -3.56 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value DS18B20 (at 1.27 2.79 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user %R (at 1.27 -3.56 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.53 1.85) (end 3.07 1.85) (layer F.SilkS) (width 0.12))
(fp_line (start -0.5 1.75) (end 3 1.75) (layer F.Fab) (width 0.1))
(fp_line (start -1.46 -2.73) (end 4 -2.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.46 -2.73) (end -1.46 2.01) (layer F.CrtYd) (width 0.05))
(fp_line (start 4 2.01) (end 4 -2.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 4 2.01) (end -1.46 2.01) (layer F.CrtYd) (width 0.05))
(fp_arc (start 1.27 0) (end 1.27 -2.48) (angle 135) (layer F.Fab) (width 0.1))
(fp_arc (start 1.27 0) (end 1.27 -2.6) (angle -135) (layer F.SilkS) (width 0.12))
(fp_arc (start 1.27 0) (end 1.27 -2.48) (angle -135) (layer F.Fab) (width 0.1))
(fp_arc (start 1.27 0) (end 1.27 -2.6) (angle 135) (layer F.SilkS) (width 0.12))
(pad 2 thru_hole oval (at 1.27 0 90) (size 1.05 1.5) (drill 0.75) (layers *.Cu *.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 42 /Controller/FRONTEND_TEMP))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 thru_hole oval (at 2.54 0 90) (size 1.05 1.5) (drill 0.75) (layers *.Cu *.Mask)
(net 4 +3V3))
(pad 1 thru_hole rect (at 0 0 90) (size 1.05 1.5) (drill 0.75) (layers *.Cu *.Mask)
(net 2 GND))
(model ${KISYS3DMOD}/Package_TO_SOT_THT.3dshapes/TO-92_Inline.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E06395E)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(at 59.75 105)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5E6DD5D6)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C215 (at 3.5 0) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(fp_text value 22n (at 0 1.43) (layer F.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 21 /Controller/TEMP_IN))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E05FC8D)
(at 57.37 54.25 270)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(path /5D77EC9D/5E2ED53B)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C203 (at 0 -1.43 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(fp_text value 100n (at 0 1.43 90) (layer F.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(fp_text user %R (at 0 0 90) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 0.4 0.4) (thickness 0.06)))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(net 2 GND))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 35 /Controller/LCD_VO))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module proz_unknown:1271.1001 (layer F.Cu) (tedit 5C192637) (tstamp 5E0E44F5)
(at 21 52 180)
(path /5E21EC78)
(fp_text reference FID101 (at 0.5 5.5) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value LightGuide (at 4.1 -2.5) (layer F.Fab) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -2.5 1.5) (end 2.5 1.5) (layer F.SilkS) (width 0.15))
(fp_line (start -2.5 -1.5) (end 2.5 -1.5) (layer F.SilkS) (width 0.15))
(fp_line (start -6.3 1.5) (end 8.1 1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start 8.1 1.5) (end 8.1 -1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start 8.1 -1.5) (end -6.3 -1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start -6.3 -1.5) (end -6.3 1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start 1.5 -1.5) (end 1.5 1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start -1.5 1.5) (end -1.5 -1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start -1.8 -1.2) (end -6 -1.2) (layer F.CrtYd) (width 0.12))
(fp_line (start -6 -1.2) (end -6 1.2) (layer F.CrtYd) (width 0.12))
(fp_line (start -6 1.2) (end -1.8 1.2) (layer F.CrtYd) (width 0.12))
(fp_line (start -1.8 1.2) (end -1.8 -1.2) (layer F.CrtYd) (width 0.12))
(pad "" np_thru_hole circle (at 0 0 180) (size 2.3 2.3) (drill 2.3) (layers *.Cu *.Mask))
)
(module Package_TO_SOT_SMD:SOT-23-6 (layer B.Cu) (tedit 5A02FF57) (tstamp 5E0DFDD3)
(at 20.75 99.25 180)
(descr "6-pin SOT-23 package")
(tags SOT-23-6)
(path /5E0F7F35)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference U101 (at 0 2.9) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value USBLC6-2SC6 (at 0 -2.9) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start 0.9 1.55) (end 0.9 -1.55) (layer B.Fab) (width 0.1))
(fp_line (start 0.9 -1.55) (end -0.9 -1.55) (layer B.Fab) (width 0.1))
(fp_line (start -0.9 0.9) (end -0.9 -1.55) (layer B.Fab) (width 0.1))
(fp_line (start 0.9 1.55) (end -0.25 1.55) (layer B.Fab) (width 0.1))
(fp_line (start -0.9 0.9) (end -0.25 1.55) (layer B.Fab) (width 0.1))
(fp_line (start -1.9 1.8) (end -1.9 -1.8) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.9 -1.8) (end 1.9 -1.8) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.9 -1.8) (end 1.9 1.8) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.9 1.8) (end -1.9 1.8) (layer B.CrtYd) (width 0.05))
(fp_line (start 0.9 1.61) (end -1.55 1.61) (layer B.SilkS) (width 0.12))
(fp_line (start -0.9 -1.61) (end 0.9 -1.61) (layer B.SilkS) (width 0.12))
(fp_text user %R (at 0 0 270) (layer B.Fab)
(effects (font (size 0.5 0.5) (thickness 0.075)) (justify mirror))
)
(pad 5 smd rect (at 1.1 0 180) (size 1.06 0.65) (layers B.Cu B.Paste B.Mask)
(net 4 +3V3))
(pad 6 smd rect (at 1.1 0.95 180) (size 1.06 0.65) (layers B.Cu B.Paste B.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 27 /DIGIO1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 4 smd rect (at 1.1 -0.95 180) (size 1.06 0.65) (layers B.Cu B.Paste B.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 28 /DIGIO0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 smd rect (at -1.1 -0.95 180) (size 1.06 0.65) (layers B.Cu B.Paste B.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 28 /DIGIO0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd rect (at -1.1 0 180) (size 1.06 0.65) (layers B.Cu B.Paste B.Mask)
(net 2 GND))
(pad 1 smd rect (at -1.1 0.95 180) (size 1.06 0.65) (layers B.Cu B.Paste B.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 27 /DIGIO1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-23-6.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Package_TO_SOT_SMD:SOT-23-6 (layer B.Cu) (tedit 5A02FF57) (tstamp 5E0DFE94)
(at 20.75 94.25 180)
(descr "6-pin SOT-23 package")
(tags SOT-23-6)
(path /5E0FFF2E)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference U102 (at 0 2.9 180) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value USBLC6-2SC6 (at 0 -2.9 180) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text user %R (at 0 0 90) (layer B.Fab)
(effects (font (size 0.5 0.5) (thickness 0.075)) (justify mirror))
)
(fp_line (start -0.9 -1.61) (end 0.9 -1.61) (layer B.SilkS) (width 0.12))
(fp_line (start 0.9 1.61) (end -1.55 1.61) (layer B.SilkS) (width 0.12))
(fp_line (start 1.9 1.8) (end -1.9 1.8) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.9 -1.8) (end 1.9 1.8) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.9 -1.8) (end 1.9 -1.8) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.9 1.8) (end -1.9 -1.8) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.9 0.9) (end -0.25 1.55) (layer B.Fab) (width 0.1))
(fp_line (start 0.9 1.55) (end -0.25 1.55) (layer B.Fab) (width 0.1))
(fp_line (start -0.9 0.9) (end -0.9 -1.55) (layer B.Fab) (width 0.1))
(fp_line (start 0.9 -1.55) (end -0.9 -1.55) (layer B.Fab) (width 0.1))
(fp_line (start 0.9 1.55) (end 0.9 -1.55) (layer B.Fab) (width 0.1))
(pad 1 smd rect (at -1.1 0.95 180) (size 1.06 0.65) (layers B.Cu B.Paste B.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 25 /DIGIO3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd rect (at -1.1 0 180) (size 1.06 0.65) (layers B.Cu B.Paste B.Mask)
(net 2 GND))
(pad 3 smd rect (at -1.1 -0.95 180) (size 1.06 0.65) (layers B.Cu B.Paste B.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 26 /DIGIO2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 4 smd rect (at 1.1 -0.95 180) (size 1.06 0.65) (layers B.Cu B.Paste B.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 26 /DIGIO2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 6 smd rect (at 1.1 0.95 180) (size 1.06 0.65) (layers B.Cu B.Paste B.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 25 /DIGIO3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 5 smd rect (at 1.1 0 180) (size 1.06 0.65) (layers B.Cu B.Paste B.Mask)
(net 4 +3V3))
(model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-23-6.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5E0E1D28)
(at 25.7125 88 180)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5E1FEFD9)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference C101 (at 0 1.43) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 100n (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
Schematic beautify and layout improvments, Length matching for SDIO
2019-12-25 19:15:32 +01:00
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E0E29E2)
(at 63.5 108)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5E2394E4)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C313 (at 0 -1.43) (layer F.SilkS)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(fp_text value 10u (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 52 "Net-(C313-Pad1)"))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5E0FC476)
(at 32 67.5 90)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5E1C8562)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R202 (at 0 1.43 90) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 10k (at 0 -1.43 90) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 4 +3V3))
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 49 /Controller/CARD_DETECT))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
Replace custom opamp circuit with INA126 instrumentation amp
2020-01-02 00:08:09 +01:00
)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(gr_text !230VAC! (at 90.75 17.25) (layer F.SilkS)
(effects (font (size 1.5 1.5) (thickness 0.15)))
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(gr_text v1.2 (at 28.25 19.5) (layer B.Mask)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1.5 1.5) (thickness 0.3)) (justify mirror))
)
(gr_arc (start 76 50.5) (end 76 49.5) (angle -180) (layer Edge.Cuts) (width 0.05))
(gr_arc (start 83.5 50.5) (end 84.5 50.5) (angle -90) (layer Edge.Cuts) (width 0.05))
(gr_line (start 76 49.5) (end 83.5 49.5) (layer Edge.Cuts) (width 0.05))
(gr_line (start 82 51.5) (end 76 51.5) (layer Edge.Cuts) (width 0.05))
(gr_arc (start 82 52) (end 82.5 52) (angle -90) (layer Edge.Cuts) (width 0.05))
(gr_line (start 33.5 68) (end 33.5 77) (layer F.SilkS) (width 0.12))
(gr_line (start 34 67.5) (end 33.5 68) (layer F.SilkS) (width 0.12))
(gr_line (start 34 65.5) (end 34 67.5) (layer F.SilkS) (width 0.12))
(gr_line (start 30 66.5) (end 30 57.5) (layer F.SilkS) (width 0.12) (tstamp 5E0FCADD))
(gr_line (start 34 66.5) (end 30 66.5) (layer F.SilkS) (width 0.12) (tstamp 5E0FCADA))
(gr_line (start 34 57.5) (end 34 66.5) (layer F.SilkS) (width 0.12) (tstamp 5E0FCAD7))
(gr_line (start 30 57.5) (end 34 57.5) (layer F.SilkS) (width 0.12) (tstamp 5E0FCAD4))
(gr_line (start 72.5 48) (end 72.5 23) (layer Edge.Cuts) (width 0.05) (tstamp 5E018699))
(gr_arc (start 70.5 48) (end 68.5 48) (angle -180) (layer Edge.Cuts) (width 0.05))
(gr_line (start 68.5 23) (end 68.5 48) (layer Edge.Cuts) (width 0.05))
(gr_arc (start 70.5 23) (end 72.5 23) (angle -180) (layer Edge.Cuts) (width 0.05))
(gr_line (start 82.5 71) (end 82.5 52) (layer Edge.Cuts) (width 0.05))
(gr_line (start 83.5 72) (end 84.5 72) (layer Edge.Cuts) (width 0.05) (tstamp 5E0181A1))
(gr_arc (start 83.5 71) (end 82.5 71) (angle -90) (layer Edge.Cuts) (width 0.05))
(gr_line (start 93 72) (end 84.5 72) (layer Edge.Cuts) (width 0.05))
(gr_line (start 84.5 69.5) (end 84.5 50.5) (layer Edge.Cuts) (width 0.05))
(gr_arc (start 85 69.5) (end 84.5 69.5) (angle -90) (layer Edge.Cuts) (width 0.05))
(gr_line (start 93 70) (end 85 70) (layer Edge.Cuts) (width 0.05))
(gr_arc (start 93 71) (end 93 72) (angle -180) (layer Edge.Cuts) (width 0.05))
(gr_arc (start 17.5 108.5) (end 18 108.5) (angle -90) (layer Edge.Cuts) (width 0.05))
(gr_arc (start 17.5 17.5) (end 17.5 18) (angle -90) (layer Edge.Cuts) (width 0.05))
(gr_line (start 18 17.5) (end 18 13) (layer Edge.Cuts) (width 0.05) (tstamp 5E017CD8))
(gr_line (start 16 18) (end 17.5 18) (layer Edge.Cuts) (width 0.05))
(gr_line (start 16 108) (end 16 18) (layer Edge.Cuts) (width 0.05))
(gr_line (start 17.5 108) (end 16 108) (layer Edge.Cuts) (width 0.05))
(gr_line (start 18 113) (end 18 108.5) (layer Edge.Cuts) (width 0.05))
(gr_line (start 13.5 14.5) (end 13.5 115) (layer Dwgs.User) (width 0.15))
(gr_poly (pts (xy 98 15) (xy 18 15) (xy 18 13) (xy 98 13)) (layer Cmts.User) (width 0.1) (tstamp 5E00D0A3))
(gr_poly (pts (xy 98 113) (xy 18 113) (xy 18 111) (xy 98 111)) (layer Cmts.User) (width 0.1))
(gr_line (start 15 18) (end 101 18) (layer Dwgs.User) (width 0.15))
(gr_line (start 18 108) (end 100 108) (layer Dwgs.User) (width 0.15))
(gr_line (start 18 108) (end 13.5 108) (layer Dwgs.User) (width 0.15))
(gr_line (start 98 13) (end 18 13) (layer Edge.Cuts) (width 0.05) (tstamp 5DEF2EDE))
(gr_line (start 98 113) (end 98 13) (layer Edge.Cuts) (width 0.05))
(gr_line (start 18 113) (end 98 113) (layer Edge.Cuts) (width 0.05))
(segment (start 97.25 96.75) (end 91.5 102.5) (width 0.3) (layer B.Cu) (net 1) (status 20))
(segment (start 97 88) (end 97.25 87.75) (width 0.3) (layer B.Cu) (net 1))
(segment (start 22.5 19.1) (end 22.5 16.5) (width 0.3) (layer F.Cu) (net 1))
(segment (start 96.75 14) (end 73 14) (width 0.3) (layer B.Cu) (net 1))
(segment (start 22.5 14) (end 20.25 14) (width 0.3) (layer B.Cu) (net 1))
(segment (start 97.375 14.625) (end 96.875 14.125) (width 0.3) (layer B.Cu) (net 1))
(segment (start 91 30) (end 97.47499 30) (width 0.6) (layer B.Cu) (net 1) (status 10))
(segment (start 97.47499 14.72499) (end 97.375 14.625) (width 0.6) (layer B.Cu) (net 1))
(segment (start 97.47499 30) (end 97.47499 14.72499) (width 0.6) (layer B.Cu) (net 1))
(segment (start 23.5 14) (end 22.5 14) (width 0.3) (layer B.Cu) (net 1) (tstamp 5E0294E1))
(via (at 23.5 14) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 1))
(segment (start 31 14) (end 23.5 14) (width 0.3) (layer B.Cu) (net 1) (tstamp 5E0294E3))
(via (at 31 14) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 1))
(segment (start 66 14) (end 31 14) (width 0.3) (layer B.Cu) (net 1) (tstamp 5E0294E5))
(via (at 66 14) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 1))
(segment (start 73 14) (end 66 14) (width 0.3) (layer B.Cu) (net 1) (tstamp 5E0294E7))
(via (at 73 14) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 1))
(segment (start 96.875 14.125) (end 96.75 14) (width 0.3) (layer B.Cu) (net 1) (tstamp 5E0294E9))
(via (at 96.875 14.125) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 1))
(segment (start 22.5 16) (end 22.5 19.1) (width 0.6) (layer F.Cu) (net 1))
(segment (start 22.5 16.5) (end 22.5 16) (width 0.6) (layer F.Cu) (net 1))
(segment (start 22.5 16) (end 22.5 14.5) (width 0.6) (layer F.Cu) (net 1))
(segment (start 22.5 14.5) (end 23 14.5) (width 0.6) (layer F.Cu) (net 1))
(segment (start 23 14.5) (end 23.5 14) (width 0.6) (layer F.Cu) (net 1))
(segment (start 22.5 19.1) (end 26.5 19.1) (width 0.6) (layer F.Cu) (net 1) (status 20))
(segment (start 97 97) (end 97 90.92) (width 0.6) (layer F.Cu) (net 1))
(segment (start 91.5 102.5) (end 97 97) (width 0.6) (layer F.Cu) (net 1) (status 10))
(segment (start 97 88) (end 91.5 88) (width 0.6) (layer F.Cu) (net 1) (status 20))
(segment (start 97 90.92) (end 97 88) (width 0.6) (layer F.Cu) (net 1))
(via (at 28.5 112) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 1))
(via (at 40 112) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 1))
(via (at 57.5 112) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 1))
(via (at 85 112) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 1))
(segment (start 91.5 107.025483) (end 91.5 111.5) (width 2) (layer B.Cu) (net 1))
(segment (start 91.5 102.5) (end 91.5 107.025483) (width 2) (layer B.Cu) (net 1) (status 10))
(segment (start 91.5 102.5) (end 91.5 111.5) (width 2) (layer F.Cu) (net 1) (status 10))
(segment (start 91 30) (end 96.77499 30) (width 2) (layer B.Cu) (net 1) (status 10))
(segment (start 22.5 19.7125) (end 22.5 19.1) (width 0.6) (layer F.Cu) (net 1) (status 10))
(segment (start 86.9 102.5) (end 91.5 102.5) (width 0.6) (layer F.Cu) (net 1) (status 30))
(segment (start 96.5 97.5) (end 96.5 88) (width 2) (layer B.Cu) (net 1))
(segment (start 91.5 102.5) (end 96.5 97.5) (width 2) (layer B.Cu) (net 1) (status 10))
(segment (start 96.5 88) (end 97 88) (width 0.3) (layer B.Cu) (net 1))
(segment (start 96.5 88) (end 91.5 88) (width 2) (layer B.Cu) (net 1) (status 20))
(segment (start 97.25 30.47501) (end 96.77499 30) (width 0.4) (layer B.Cu) (net 1))
(segment (start 91 30) (end 97.62499 30) (width 0.3) (layer B.Cu) (net 1) (status 10))
(segment (start 96.5 88) (end 97.5 87) (width 0.4) (layer B.Cu) (net 1))
(segment (start 97.5 30) (end 97.5 30.5) (width 0.4) (layer B.Cu) (net 1))
(segment (start 97.5 87) (end 97.5 30) (width 0.4) (layer B.Cu) (net 1))
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(segment (start 91.45 102.45) (end 91.5 102.5) (width 1) (layer F.Cu) (net 1))
(segment (start 60 14) (end 66 14) (width 1) (layer F.Cu) (net 1))
(segment (start 30 14) (end 31 14) (width 1) (layer F.Cu) (net 1))
(segment (start 30 17.275) (end 30 14) (width 1) (layer F.Cu) (net 1))
(segment (start 53 17.275) (end 53 14) (width 1) (layer F.Cu) (net 1))
(segment (start 33 110.725) (end 33 112) (width 1) (layer F.Cu) (net 1))
(segment (start 33 112) (end 28.5 112) (width 1) (layer F.Cu) (net 1))
Improve layout, change color of B.Silk and improve schematic
2020-01-12 14:56:58 +01:00
(via (at 76 68.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 75 68.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 77.5 70) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(via (at 65.75 100.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 36 46) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 34 78) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 34 80) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 41 36.5) (end 42 37.5) (width 1) (layer F.Cu) (net 2))
(segment (start 48.5 37.5) (end 50.58 35.42) (width 1) (layer F.Cu) (net 2) (status 20))
(segment (start 42 37.5) (end 48.5 37.5) (width 1) (layer F.Cu) (net 2))
(segment (start 26.54 21.94) (end 26.5 21.9) (width 1) (layer F.Cu) (net 2) (status 30))
(segment (start 26.54 30.5) (end 26.54 21.94) (width 1) (layer F.Cu) (net 2) (status 30))
(segment (start 26.5 21.9) (end 22.5 21.9) (width 1) (layer F.Cu) (net 2) (status 10))
(via (at 77.5 68.5) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
(segment (start 76.22 70.2) (end 76.22 69.78) (width 1) (layer F.Cu) (net 2) (status 30))
(segment (start 76.22 69.78) (end 77.5 68.5) (width 1) (layer F.Cu) (net 2) (status 10))
(segment (start 77.5625 71.5425) (end 76.22 70.2) (width 1) (layer F.Cu) (net 2) (status 20))
(segment (start 77.5625 73) (end 77.5625 71.5425) (width 1) (layer F.Cu) (net 2) (status 10))
(segment (start 75.92 69.9) (end 76.22 70.2) (width 1) (layer F.Cu) (net 2) (status 30))
(segment (start 73 69.9) (end 75.92 69.9) (width 1) (layer F.Cu) (net 2) (status 30))
(via (at 52.56 107.51) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 52.5 106.2875) (end 52.5 107.45) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 52.5 107.45) (end 52.56 107.51) (width 0.3) (layer F.Cu) (net 2))
(segment (start 46.5 104.3) (end 46.5 104.18) (width 0.3) (layer F.Cu) (net 2) (status 30))
(segment (start 46.5 104.18) (end 47 103.68) (width 0.3) (layer F.Cu) (net 2) (status 10))
Move vias to better locations: These vias have proven unfortunately placed for hand soldering
2020-02-05 22:12:31 +01:00
(via (at 50 97.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(segment (start 50.51 97.74) (end 50.21 97.74) (width 0.3) (layer F.Cu) (net 2))
(segment (start 52 101.675) (end 52 99.23) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 52 99.23) (end 50.51 97.74) (width 0.3) (layer F.Cu) (net 2))
(segment (start 51.4725 97.74) (end 51.5 97.7125) (width 0.3) (layer B.Cu) (net 2) (status 30))
(segment (start 50.21 97.74) (end 51.4725 97.74) (width 0.3) (layer B.Cu) (net 2) (status 20))
(via (at 66 53) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 67 53) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 68 53) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 68 57) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 67 57) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 66 57) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 39.5 59.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 35.5 59.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 26.5 60.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 45 59.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 45 62.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 35.5 62.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 26.5 64) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 50.2325 79.945) (end 50 79.7125) (width 0.3) (layer F.Cu) (net 2) (status 30))
(segment (start 52.85 79.945) (end 50.2325 79.945) (width 0.3) (layer F.Cu) (net 2) (status 30))
(via (at 60.35 81.19) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 62.15 81.215) (end 60.375 81.215) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 60.375 81.215) (end 60.35 81.19) (width 0.3) (layer F.Cu) (net 2))
(via (at 60 70) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 67.94 80.65) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 67.95 79.5) (end 67.95 80.64) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 67.95 80.64) (end 67.94 80.65) (width 0.3) (layer F.Cu) (net 2))
(segment (start 39.2875 99.5) (end 38.5 98.7125) (width 0.3) (layer F.Cu) (net 2) (status 20))
(segment (start 40.825 99.5) (end 39.2875 99.5) (width 0.3) (layer F.Cu) (net 2) (status 10))
Move vias to better locations: These vias have proven unfortunately placed for hand soldering
2020-02-05 22:12:31 +01:00
(via (at 46.75 99.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(segment (start 47 101.675) (end 47 100.04) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 47 100.04) (end 46.35 99.39) (width 0.3) (layer F.Cu) (net 2))
Move vias to better locations: These vias have proven unfortunately placed for hand soldering
2020-02-05 22:12:31 +01:00
(via (at 46 100) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2) (tstamp 5E3B72CF))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(segment (start 47 103.1) (end 47 103.43) (width 0.3) (layer F.Cu) (net 2))
(segment (start 47 103.1) (end 47 101.675) (width 0.3) (layer F.Cu) (net 2) (status 20))
(segment (start 47 103.68) (end 47 103.1) (width 0.3) (layer F.Cu) (net 2))
(via (at 65.75 98.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 60 94) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 82 95) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 82 98) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 32.48 97.98) (end 32.5 97.96) (width 0.3) (layer F.Cu) (net 2) (status 30))
(via (at 37 83.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 37 84.9) (end 37 83.75) (width 0.6) (layer F.Cu) (net 2) (status 10))
(via (at 37 86.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 37 84.9) (end 37 86.25) (width 0.6) (layer F.Cu) (net 2) (status 10))
(via (at 39.5 74) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 40 73.135) (end 40 73.4) (width 0.3) (layer F.Cu) (net 2) (status 30))
(segment (start 43 84.575) (end 41.925 83.5) (width 0.3) (layer F.Cu) (net 2) (status 20))
(segment (start 43 86.325) (end 43 84.575) (width 0.3) (layer F.Cu) (net 2) (status 10))
(via (at 41.9 82.2) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 41.925 83.5) (end 41.925 82.225) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 41.925 82.225) (end 41.9 82.2) (width 0.3) (layer F.Cu) (net 2))
(via (at 39.86 86.21) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 37 84.9) (end 38.55 84.9) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 38.55 84.9) (end 39.86 86.21) (width 0.3) (layer F.Cu) (net 2))
(via (at 25 76.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 29 66) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 58.31 100.56) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 56.175 99.5) (end 57.25 99.5) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 57.25 99.5) (end 58.31 100.56) (width 0.3) (layer F.Cu) (net 2))
(via (at 42.63 96.96) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 40.825 97) (end 42.59 97) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 42.59 97) (end 42.63 96.96) (width 0.3) (layer F.Cu) (net 2))
(via (at 36 45) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 36 44) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 93 77.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 61.7875 100.5) (end 61.14375 99.85625) (width 0.3) (layer F.Cu) (net 2))
(segment (start 61.7875 101) (end 61.7875 100.5) (width 0.3) (layer F.Cu) (net 2) (status 10))
(via (at 39.75 103.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 39.75 101) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 43.04 99.13) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 40.825 99.5) (end 42.67 99.5) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 42.67 99.5) (end 43.04 99.13) (width 0.3) (layer F.Cu) (net 2))
(via (at 73 53) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
(via (at 73 59) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
(via (at 41.5 56) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
(via (at 47.5 89.77) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
(via (at 47 95) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
Move vias to better locations: These vias have proven unfortunately placed for hand soldering
2020-02-05 22:12:31 +01:00
(via (at 52.25 94) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(via (at 44 98) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(via (at 87.5 75.5) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(segment (start 73.9375 53.9375) (end 73 53) (width 0.3) (layer F.Cu) (net 2))
(segment (start 73.9375 56) (end 73.9375 53.9375) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 73 56.9375) (end 73.9375 56) (width 0.3) (layer F.Cu) (net 2) (status 20))
(segment (start 73 59) (end 73 56.9375) (width 0.3) (layer F.Cu) (net 2))
(via (at 34.18 72.45) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 32.7875 72.5) (end 34.13 72.5) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 34.13 72.5) (end 34.18 72.45) (width 0.3) (layer F.Cu) (net 2))
(via (at 24 82) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 22 86) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 25 86) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 63 90) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 40.825 97) (end 39 97) (width 0.25) (layer F.Cu) (net 2) (status 10))
(segment (start 38.5 97.5) (end 38.5 98.7125) (width 0.25) (layer F.Cu) (net 2) (status 20))
(segment (start 39 97) (end 38.5 97.5) (width 0.25) (layer F.Cu) (net 2))
(segment (start 62.25 90.75) (end 63 90) (width 0.3) (layer B.Cu) (net 2) (status 10))
(segment (start 62.25 90.9625) (end 62.25 90.75) (width 0.3) (layer B.Cu) (net 2) (status 30))
(segment (start 61.14375 99.85625) (end 60.2875 99) (width 0.3) (layer F.Cu) (net 2) (tstamp 5E02B2E8) (status 20))
(via (at 61.14375 99.85625) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 48 84.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 49.5 84.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 93 77.5) (end 94.4 77.5) (width 0.6) (layer F.Cu) (net 2) (status 20))
(via (at 25 74) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 25 72) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 19.5 72) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 19.5 74) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 17.9 66.3) (end 19.8 66.3) (width 0.3) (layer F.Cu) (net 2) (status 10))
(via (at 20 66.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 19.8 66.3) (end 20 66.5) (width 0.3) (layer F.Cu) (net 2))
(via (at 19 80.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 17.9 81.8) (end 17.9 80.9) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 18.3 80.5) (end 19 80.5) (width 0.3) (layer F.Cu) (net 2))
(segment (start 17.9 80.9) (end 18.3 80.5) (width 0.3) (layer F.Cu) (net 2))
(via (at 24.5 70.5) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
(segment (start 24.8 70.8) (end 24.5 70.5) (width 0.6) (layer F.Cu) (net 2))
(segment (start 28 70.8) (end 24.8 70.8) (width 0.6) (layer F.Cu) (net 2) (status 10))
(segment (start 39.5 47.02) (end 37.28 44.8) (width 1) (layer F.Cu) (net 2) (status 20))
(segment (start 39.5 48.7125) (end 39.5 47.02) (width 1) (layer F.Cu) (net 2) (status 10))
(segment (start 29.5 48.4375) (end 28.0625 48.4375) (width 1) (layer F.Cu) (net 2) (status 10))
(via (at 28 48.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 28.0625 48.4375) (end 28 48.5) (width 1) (layer F.Cu) (net 2))
(via (at 31 54.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 29.7875 54.5) (end 31 54.5) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 27 49.5) (end 28 48.5) (width 0.3) (layer F.Cu) (net 2))
(segment (start 25.7875 49.5) (end 27 49.5) (width 0.3) (layer F.Cu) (net 2) (status 10))
(via (at 61.5 99) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 59.26251 89.49999) (end 58.999083 89.49999) (width 0.3) (layer F.Cu) (net 2))
(via (at 58.999083 89.49999) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 57.06 100.56) (end 58.31 100.56) (width 0.3) (layer B.Cu) (net 2))
(segment (start 56.5 100) (end 57.06 100.56) (width 0.3) (layer B.Cu) (net 2))
(segment (start 22.5 21.9) (end 22.5 21.2875) (width 0.6) (layer F.Cu) (net 2) (status 20))
(segment (start 50.21 100.21) (end 50.21 97.74) (width 0.3) (layer B.Cu) (net 2))
(segment (start 50.73 100.73) (end 50.21 100.21) (width 0.3) (layer B.Cu) (net 2))
(segment (start 56.5 100) (end 55.77 100.73) (width 0.3) (layer B.Cu) (net 2))
(segment (start 55.77 100.73) (end 50.73 100.73) (width 0.3) (layer B.Cu) (net 2))
(via (at 48.5 108) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 50.5 108) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 29 77.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 29 82.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 25 80.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 46.0875 104.7125) (end 46.5 104.3) (width 0.6) (layer F.Cu) (net 2) (status 30))
(segment (start 44.5 104.7125) (end 46.0875 104.7125) (width 0.6) (layer F.Cu) (net 2) (status 30))
(segment (start 52.0875 106.7) (end 52.5 106.2875) (width 0.6) (layer F.Cu) (net 2) (status 20))
(segment (start 50.5 106.7) (end 52.0875 106.7) (width 0.6) (layer F.Cu) (net 2) (status 10))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(via (at 65.75 108) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(segment (start 61.893553 95.3) (end 61.54 95.3) (width 0.3) (layer F.Cu) (net 2))
(segment (start 64.25 94.77) (end 63.72 95.3) (width 0.3) (layer F.Cu) (net 2) (status 30))
(segment (start 63.72 95.3) (end 61.893553 95.3) (width 0.3) (layer F.Cu) (net 2) (status 10))
(via (at 61.54 95.3) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 82 100) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 82 102.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 61 102.2625) (end 61 104.5) (width 0.25) (layer F.Cu) (net 2))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(via (at 61.5 104.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(segment (start 61.7875 101) (end 61.7875 101.475) (width 0.25) (layer F.Cu) (net 2) (status 10))
(segment (start 61.7875 101.475) (end 61 102.2625) (width 0.25) (layer F.Cu) (net 2))
(segment (start 65.25 95) (end 64.25 95) (width 0.25) (layer F.Cu) (net 2) (status 20))
(segment (start 65.32501 94.92499) (end 65.32501 91.31501) (width 0.25) (layer F.Cu) (net 2))
(segment (start 65.25 95) (end 65.32501 94.92499) (width 0.25) (layer F.Cu) (net 2))
(segment (start 64.01 90) (end 63 90) (width 0.25) (layer F.Cu) (net 2))
(segment (start 65.32501 91.31501) (end 64.01 90) (width 0.25) (layer F.Cu) (net 2))
(via (at 65.75 104.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2) (tstamp 5E0F966B))
(via (at 60 74.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 52 101.675) (end 52 102.9) (width 0.25) (layer F.Cu) (net 2) (status 10))
(segment (start 52 102.9) (end 53.56 104.46) (width 0.25) (layer F.Cu) (net 2))
(segment (start 52.975 106.2875) (end 52.5 106.2875) (width 0.25) (layer F.Cu) (net 2) (status 20))
(segment (start 53.56 105.7025) (end 52.975 106.2875) (width 0.25) (layer F.Cu) (net 2))
(segment (start 53.56 104.46) (end 53.56 105.7025) (width 0.25) (layer F.Cu) (net 2))
(segment (start 65.5 95.25) (end 65.25 95) (width 0.25) (layer F.Cu) (net 2))
(segment (start 65.85 98.03) (end 65.85 95.92) (width 0.25) (layer F.Cu) (net 2))
(segment (start 65.5 95.57) (end 65.5 95.25) (width 0.25) (layer F.Cu) (net 2))
(segment (start 65.85 95.92) (end 65.5 95.57) (width 0.25) (layer F.Cu) (net 2))
(via (at 58.01 92.54) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 61.59 85.92) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 44.99 87.73) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 43.08 87.73) (end 44.636447 87.73) (width 0.25) (layer F.Cu) (net 2))
(segment (start 44.636447 87.73) (end 44.99 87.73) (width 0.25) (layer F.Cu) (net 2))
(segment (start 43 86.325) (end 43 87.65) (width 0.25) (layer F.Cu) (net 2) (status 10))
(segment (start 43 87.65) (end 43.08 87.73) (width 0.25) (layer F.Cu) (net 2))
Move vias to better locations: These vias have proven unfortunately placed for hand soldering
2020-02-05 22:12:31 +01:00
(via (at 50 96.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(via (at 22 109) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 25 109) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 28 109) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 31 109) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 34 109) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 37 109) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 23 104) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 25 87) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 22 87) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 45.5 91.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 44.25 94.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 44 92.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 34.999992 83.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 35.85 83.75) (end 34.999992 83.75) (width 0.6) (layer F.Cu) (net 2))
(segment (start 37 84.9) (end 35.85 83.75) (width 0.6) (layer F.Cu) (net 2) (status 10))
(via (at 34.75 91.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 33.66 91.5) (end 32.5 90.34) (width 0.6) (layer F.Cu) (net 2) (status 20))
(segment (start 34.75 91.5) (end 33.66 91.5) (width 0.6) (layer F.Cu) (net 2))
(via (at 38.25 93.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 36.75 90.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 56.5 106.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 56.5 108.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 60.5 83.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 63.5 82.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 64.25 94.77) (end 64.25 95.4) (width 0.3) (layer B.Cu) (net 2))
(via (at 40.25 109) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 26.5 88) (end 26.5 87) (width 0.3) (layer B.Cu) (net 2))
(segment (start 26.5 87) (end 25 87) (width 0.3) (layer B.Cu) (net 2))
(segment (start 50 79.7125) (end 50 78.5) (width 0.3) (layer F.Cu) (net 2))
(via (at 50 78.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 50 72.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 50.175 72.325) (end 50 72.5) (width 0.3) (layer F.Cu) (net 2))
(segment (start 52.85 72.325) (end 50.175 72.325) (width 0.3) (layer F.Cu) (net 2))
(segment (start 50.215 69.785) (end 50 70) (width 0.3) (layer F.Cu) (net 2))
(segment (start 52.85 69.785) (end 50.215 69.785) (width 0.3) (layer F.Cu) (net 2))
(via (at 50 70) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 41.749984 107.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 41.64 107.640016) (end 41.749984 107.75) (width 0.3) (layer F.Cu) (net 2))
(segment (start 41.64 106.3975) (end 41.64 107.640016) (width 0.3) (layer F.Cu) (net 2))
(via (at 39.5 74.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 39.5 75.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 35.5 64.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 37.5 64.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 37.5 62.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 40.25 62.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 40.25 64.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Improve layout, change color of B.Silk and improve schematic
2020-01-12 14:56:58 +01:00
(segment (start 56.175 99.5) (end 53.5 99.5) (width 0.25) (layer F.Cu) (net 2))
(segment (start 51.74 97.74) (end 50.21 97.74) (width 0.25) (layer F.Cu) (net 2))
(segment (start 53.5 99.5) (end 51.74 97.74) (width 0.25) (layer F.Cu) (net 2))
(via (at 56 85) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 58.5 85.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 52 109.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 48 109.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(segment (start 77.4625 73.1) (end 77.5625 73) (width 0.6) (layer F.Cu) (net 2))
(segment (start 75.05 73.1) (end 77.4625 73.1) (width 0.6) (layer F.Cu) (net 2))
(segment (start 79.9125 75.35) (end 77.5625 73) (width 0.6) (layer F.Cu) (net 2))
(segment (start 80.75 75.35) (end 79.9125 75.35) (width 0.6) (layer F.Cu) (net 2))
(via (at 74.5 75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 75.05 73.1) (end 75.05 74.45) (width 0.6) (layer F.Cu) (net 2))
(segment (start 75.05 74.45) (end 74.5 75) (width 0.6) (layer F.Cu) (net 2))
(via (at 75.75 75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 74.5 75) (end 75.75 75) (width 0.6) (layer B.Cu) (net 2))
(segment (start 75.05 74.3) (end 75.75 75) (width 0.6) (layer F.Cu) (net 2))
(segment (start 75.05 73.1) (end 75.05 74.3) (width 0.6) (layer F.Cu) (net 2))
(via (at 82.75 75.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 80.75 75.35) (end 82.6 75.35) (width 0.6) (layer F.Cu) (net 2))
(segment (start 82.6 75.35) (end 82.75 75.5) (width 0.6) (layer F.Cu) (net 2))
(segment (start 60.975 105) (end 60.5375 105) (width 0.4) (layer F.Cu) (net 2))
(segment (start 61 104.975) (end 60.975 105) (width 0.4) (layer F.Cu) (net 2))
(segment (start 61 104.5) (end 61 104.975) (width 0.4) (layer F.Cu) (net 2))
(segment (start 61.2875 104.25) (end 60.5375 105) (width 0.4) (layer F.Cu) (net 2))
(segment (start 61.5 104.25) (end 61.2875 104.25) (width 0.4) (layer F.Cu) (net 2))
(segment (start 64.2875 108) (end 65.75 108) (width 0.3) (layer F.Cu) (net 2))
Re-annotate components
2020-02-05 18:58:36 +01:00
(via (at 62.5 109.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Move vias to better locations: These vias have proven unfortunately placed for hand soldering
2020-02-05 22:12:31 +01:00
(via (at 71.75 75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 71.75 76.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 74.5 76.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 75.75 76.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 75.5 90.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(via (at 79.5 69) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 3))
(via (at 79.5 71) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 3))
(segment (start 23 39) (end 23 31.5) (width 1) (layer F.Cu) (net 3))
(segment (start 23 31.5) (end 24 30.5) (width 1) (layer F.Cu) (net 3) (status 20))
(segment (start 24.5 40.5) (end 23 39) (width 1) (layer F.Cu) (net 3))
(segment (start 91.6 82.9) (end 91.5 83) (width 1) (layer F.Cu) (net 3) (status 30))
(segment (start 91.6 77.5) (end 91.6 82.9) (width 1) (layer F.Cu) (net 3) (status 30))
(segment (start 46.5 40.5) (end 45.5 40.5) (width 1) (layer B.Cu) (net 3) (status 30))
(segment (start 81 68.5) (end 81 57) (width 1) (layer B.Cu) (net 3))
(segment (start 81 57) (end 79 55) (width 1) (layer B.Cu) (net 3))
(segment (start 79 55) (end 61 55) (width 1) (layer B.Cu) (net 3))
(segment (start 61 55) (end 46.5 40.5) (width 1) (layer B.Cu) (net 3) (status 20))
(segment (start 26.72 40.22) (end 26.5 40) (width 1) (layer F.Cu) (net 3) (status 30))
(segment (start 91.5 83.6875) (end 91.5 83) (width 0.3) (layer B.Cu) (net 3) (status 30))
(segment (start 87.975 87.2125) (end 91.5 83.6875) (width 0.3) (layer B.Cu) (net 3) (status 20))
(segment (start 87.5 87.2125) (end 87.975 87.2125) (width 0.3) (layer B.Cu) (net 3) (status 10))
(segment (start 30.9575 46.5625) (end 32.72 44.8) (width 1) (layer F.Cu) (net 3) (status 20))
(segment (start 29.5 46.5625) (end 30.9575 46.5625) (width 1) (layer F.Cu) (net 3) (status 10))
(segment (start 79.4375 73) (end 80.56 73) (width 0.6) (layer F.Cu) (net 3) (status 10))
(segment (start 80.78 72.78) (end 80.56 73) (width 1) (layer F.Cu) (net 3))
(segment (start 80.78 70.2) (end 80.78 72.78) (width 1) (layer F.Cu) (net 3) (status 10))
(segment (start 83.0997 74.0997) (end 81 72) (width 0.6) (layer B.Cu) (net 3))
(segment (start 91.5 83) (end 91.5 76.514) (width 0.6) (layer B.Cu) (net 3) (status 10))
(segment (start 89.0857 74.0997) (end 83.0997 74.0997) (width 0.6) (layer B.Cu) (net 3))
(segment (start 91.5 76.514) (end 89.0857 74.0997) (width 0.6) (layer B.Cu) (net 3))
(segment (start 24.5 40.5) (end 45.5 40.5) (width 1) (layer F.Cu) (net 3) (status 20))
(via (at 79.5 70) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 3))
(segment (start 79.5 69) (end 79.5 71) (width 1) (layer F.Cu) (net 3))
(segment (start 79.7 70.2) (end 79.5 70) (width 1) (layer F.Cu) (net 3))
(segment (start 80.78 70.2) (end 79.7 70.2) (width 1) (layer F.Cu) (net 3))
(segment (start 33.75 40) (end 37 40) (width 1) (layer F.Cu) (net 3))
(segment (start 32.72 44.8) (end 32.72 41.03) (width 1) (layer F.Cu) (net 3))
(segment (start 32.72 41.03) (end 33.75 40) (width 1) (layer F.Cu) (net 3))
(segment (start 79.5 70) (end 81 70) (width 0.3) (layer B.Cu) (net 3))
(segment (start 81 72) (end 81 70) (width 0.6) (layer B.Cu) (net 3))
(segment (start 81 70) (end 81 68.5) (width 0.6) (layer B.Cu) (net 3))
(via (at 39.25 83.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 4))
(via (at 40.25 83.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 4))
(via (at 40.25 84.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 4))
(via (at 39.25 84.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 4))
(via (at 39.75 84) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 4))
(segment (start 51.5 101.675) (end 51.5 100.39) (width 0.3) (layer F.Cu) (net 4) (status 10))
(segment (start 56.175 99) (end 54.99 99) (width 0.3) (layer F.Cu) (net 4) (status 10))
(via (at 48.48 93.76) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 4))
(segment (start 48.48 92.38) (end 48.48 93.76) (width 0.6) (layer B.Cu) (net 4))
(segment (start 51.5 100.39) (end 49.74 98.55) (width 0.3) (layer F.Cu) (net 4))
(segment (start 57.675 86.5) (end 56.175 88) (width 0.3) (layer F.Cu) (net 4) (status 20))
(segment (start 58.2125 86.5) (end 57.675 86.5) (width 0.3) (layer F.Cu) (net 4) (status 10))
(segment (start 42.5 86.325) (end 42.5 85.5) (width 0.3) (layer F.Cu) (net 4) (status 10))
(segment (start 42.5 85.5) (end 42 85) (width 0.3) (layer F.Cu) (net 4))
(segment (start 38.7875 100) (end 38.5 100.2875) (width 0.3) (layer F.Cu) (net 4) (status 30))
(segment (start 40.825 100) (end 38.7875 100) (width 0.3) (layer F.Cu) (net 4) (status 30))
(segment (start 40.825 100) (end 45.02 100) (width 0.3) (layer F.Cu) (net 4) (status 10))
(segment (start 45 100.02) (end 45 101.675) (width 0.3) (layer F.Cu) (net 4) (status 20))
(segment (start 45.02 100) (end 45 100.02) (width 0.3) (layer F.Cu) (net 4))
(segment (start 45.02 100) (end 45.02 99.37) (width 0.3) (layer F.Cu) (net 4))
(segment (start 45.02 99.37) (end 46.03 98.36) (width 0.3) (layer F.Cu) (net 4))
(segment (start 45 101.675) (end 45 102.97) (width 0.3) (layer F.Cu) (net 4) (status 10))
(segment (start 45 102.97) (end 44.45 103.52) (width 0.3) (layer F.Cu) (net 4))
(segment (start 42.9425 103.52) (end 41.64 104.8225) (width 0.3) (layer F.Cu) (net 4) (status 20))
(segment (start 44.45 103.52) (end 42.9425 103.52) (width 0.3) (layer F.Cu) (net 4))
(segment (start 23.96 90.34) (end 23.96 90.79) (width 0.3) (layer B.Cu) (net 4) (status 30))
(segment (start 23.96 90.79) (end 24.77 91.6) (width 0.3) (layer B.Cu) (net 4) (status 10))
(segment (start 24.77 91.6) (end 28.2 91.6) (width 0.3) (layer B.Cu) (net 4))
(segment (start 29.2125 92.6125) (end 29.2125 93.5) (width 0.3) (layer B.Cu) (net 4) (status 20))
(segment (start 29.2125 102.5) (end 29.2125 103.6375) (width 0.3) (layer B.Cu) (net 4) (status 10))
(via (at 29.21 103.64) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 4))
(segment (start 29.2125 103.6375) (end 29.21 103.64) (width 0.3) (layer B.Cu) (net 4))
(segment (start 28.2 91.6) (end 29.21 92.46) (width 0.3) (layer B.Cu) (net 4))
(segment (start 29.21 92.46) (end 29.2125 92.6125) (width 0.3) (layer B.Cu) (net 4))
(segment (start 31.2125 72.5) (end 29.75 72.5) (width 0.3) (layer F.Cu) (net 4) (status 10))
(segment (start 29.25 73) (end 28 73) (width 0.3) (layer F.Cu) (net 4) (status 20))
(segment (start 29.75 72.5) (end 29.25 73) (width 0.3) (layer F.Cu) (net 4))
(segment (start 31.2875 72.5) (end 32.7875 71) (width 0.3) (layer F.Cu) (net 4) (status 30))
(segment (start 31.2125 72.5) (end 31.2875 72.5) (width 0.3) (layer F.Cu) (net 4) (status 30))
(segment (start 32.7875 71) (end 32.7875 69.5) (width 0.3) (layer F.Cu) (net 4) (status 30))
(segment (start 32.7875 69.5) (end 32.7875 68) (width 0.3) (layer F.Cu) (net 4) (status 30))
(segment (start 31.2875 72.5) (end 32.7875 74) (width 0.3) (layer F.Cu) (net 4) (status 30))
(segment (start 32.7875 74) (end 32.7875 77) (width 0.3) (layer F.Cu) (net 4) (status 30))
(segment (start 21 73) (end 28 73) (width 0.6) (layer F.Cu) (net 4) (status 20))
(segment (start 38.025 68.425) (end 37.45 67.85) (width 0.3) (layer B.Cu) (net 4) (status 10))
(segment (start 38.5 68.425) (end 38.025 68.425) (width 0.3) (layer B.Cu) (net 4) (status 30))
(via (at 33.81 67.88) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 4))
(segment (start 37.45 67.85) (end 33.84 67.85) (width 0.3) (layer B.Cu) (net 4))
(segment (start 33.84 67.85) (end 33.81 67.88) (width 0.3) (layer B.Cu) (net 4))
(segment (start 32.9075 67.88) (end 32.7875 68) (width 0.3) (layer F.Cu) (net 4) (status 30))
(segment (start 33.81 67.88) (end 32.9075 67.88) (width 0.3) (layer F.Cu) (net 4) (status 20))
(segment (start 33.3775 73.41) (end 32.7875 74) (width 0.3) (layer F.Cu) (net 4) (status 20))
(segment (start 36.628225 73.41) (end 33.3775 73.41) (width 0.3) (layer F.Cu) (net 4))
(segment (start 37.46 73.135) (end 36.903225 73.135) (width 0.3) (layer F.Cu) (net 4) (status 10))
(segment (start 36.903225 73.135) (end 36.628225 73.41) (width 0.3) (layer F.Cu) (net 4))
(segment (start 36.7125 78) (end 36.7125 80) (width 0.3) (layer F.Cu) (net 4) (status 30))
(segment (start 36.7125 81.8125) (end 37 82.1) (width 0.3) (layer F.Cu) (net 4) (status 30))
(segment (start 36.7125 80) (end 36.7125 81.8125) (width 0.3) (layer F.Cu) (net 4) (status 30))
(via (at 46 98) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 4))
(segment (start 46.03 98.36) (end 46.03 98.03) (width 0.3) (layer F.Cu) (net 4))
(segment (start 46.03 98.03) (end 46 98) (width 0.3) (layer F.Cu) (net 4))
(segment (start 46 98) (end 46 96.2125) (width 0.3) (layer B.Cu) (net 4) (status 20))
(segment (start 64.2675 92.2125) (end 64.25 92.23) (width 0.3) (layer B.Cu) (net 4) (status 30))
(segment (start 54.99 99) (end 54.5 98.5) (width 0.3) (layer F.Cu) (net 4))
(segment (start 53.75 98.5) (end 54.5 98.5) (width 0.6) (layer F.Cu) (net 4))
(via (at 50.25 92.34) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 4))
(segment (start 49.613604 92.34) (end 50.25 92.34) (width 0.6) (layer B.Cu) (net 4))
(segment (start 48.48 92.38) (end 48.52 92.34) (width 0.6) (layer B.Cu) (net 4))
(segment (start 48.52 92.34) (end 49.613604 92.34) (width 0.6) (layer B.Cu) (net 4))
(segment (start 50.699999 91.890001) (end 50.25 92.34) (width 0.6) (layer F.Cu) (net 4))
(segment (start 21 73) (end 21 68) (width 1) (layer F.Cu) (net 4))
(segment (start 35 54) (end 35 51.1) (width 1) (layer F.Cu) (net 4) (status 30))
(segment (start 21 68) (end 35 54) (width 1) (layer F.Cu) (net 4) (status 20))
(segment (start 37.4375 53.5375) (end 35 51.1) (width 1) (layer F.Cu) (net 4) (status 30))
(segment (start 37.4375 58) (end 37.4375 53.5375) (width 1) (layer F.Cu) (net 4) (status 30))
(segment (start 35.8125 50.2875) (end 35 51.1) (width 1) (layer F.Cu) (net 4) (status 30))
(segment (start 39.5 50.2875) (end 35.8125 50.2875) (width 1) (layer F.Cu) (net 4) (status 30))
(segment (start 58.7125 98.525) (end 58.7125 99) (width 0.6) (layer F.Cu) (net 4) (status 30))
(segment (start 59.4375 97.8) (end 58.7125 98.525) (width 0.6) (layer F.Cu) (net 4) (status 20))
(segment (start 51.045 91.545) (end 50.699999 91.890001) (width 0.6) (layer F.Cu) (net 4) (tstamp 5E039F08))
(via (at 51.045 91.545) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 4))
(segment (start 50.25 92.34) (end 51.045 91.545) (width 0.6) (layer B.Cu) (net 4))
(via (at 54 96.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 4))
(segment (start 52.875 97.625) (end 53.75 98.5) (width 0.6) (layer F.Cu) (net 4))
(segment (start 59.5 97.7375) (end 59.4375 97.8) (width 0.4) (layer F.Cu) (net 4))
(segment (start 52.875 97.625) (end 54 96.5) (width 0.6) (layer F.Cu) (net 4))
(segment (start 39.1 82.1) (end 37 82.1) (width 0.6) (layer F.Cu) (net 4) (status 20))
(segment (start 59.5 97.7375) (end 59.78 97.4575) (width 0.6) (layer F.Cu) (net 4))
(segment (start 59.78 96.473553) (end 59.78 96.12) (width 0.6) (layer F.Cu) (net 4))
(via (at 59.78 96.12) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 4))
(segment (start 59.78 97.4575) (end 59.78 96.473553) (width 0.6) (layer F.Cu) (net 4))
(segment (start 59.33 95.67) (end 59.78 96.12) (width 0.6) (layer B.Cu) (net 4))
(segment (start 54 96.5) (end 54.83 95.67) (width 0.6) (layer B.Cu) (net 4))
(segment (start 61.53 97.8) (end 59.4375 97.8) (width 0.6) (layer F.Cu) (net 4))
(segment (start 62.025 103) (end 62.6 103) (width 0.6) (layer F.Cu) (net 4) (status 10))
(segment (start 63.5 99.77) (end 61.53 97.8) (width 0.6) (layer F.Cu) (net 4))
(segment (start 63.5 102.1) (end 63.5 99.77) (width 0.6) (layer F.Cu) (net 4))
(segment (start 62.6 103) (end 63.5 102.1) (width 0.6) (layer F.Cu) (net 4))
(segment (start 49.09 97.9) (end 49.74 98.55) (width 0.3) (layer F.Cu) (net 4))
(segment (start 49.09 98.05) (end 49.09 97.9) (width 0.3) (layer F.Cu) (net 4))
(segment (start 48.6 98.54) (end 49.09 98.05) (width 0.3) (layer F.Cu) (net 4))
(segment (start 47.59 98.54) (end 48.6 98.54) (width 0.3) (layer F.Cu) (net 4))
(segment (start 47.5 101.675) (end 47.5 98.61) (width 0.3) (layer F.Cu) (net 4) (status 10))
(segment (start 56.81 95.67) (end 56.81 91.38) (width 0.4) (layer B.Cu) (net 4))
(segment (start 54.83 95.67) (end 56.81 95.67) (width 0.6) (layer B.Cu) (net 4))
(segment (start 56.81 95.67) (end 59.33 95.67) (width 0.6) (layer B.Cu) (net 4))
(segment (start 56.81 91.38) (end 57.78 90.41) (width 0.4) (layer B.Cu) (net 4))
(segment (start 59.6475 90.41) (end 61.775 92.5375) (width 0.4) (layer B.Cu) (net 4) (status 20))
(segment (start 61.775 92.5375) (end 62.25 92.5375) (width 0.4) (layer B.Cu) (net 4) (status 30))
(segment (start 57.78 90.41) (end 59.6475 90.41) (width 0.4) (layer B.Cu) (net 4))
(segment (start 51.52 96.27) (end 52.875 97.625) (width 0.6) (layer F.Cu) (net 4))
(segment (start 48.48 93.76) (end 49.36 94.64) (width 0.6) (layer F.Cu) (net 4))
(segment (start 50.99 96.27) (end 51.52 96.27) (width 0.6) (layer F.Cu) (net 4))
(segment (start 49.09 94.37) (end 49.09 97.9) (width 0.6) (layer F.Cu) (net 4))
(segment (start 48.48 93.76) (end 49.09 94.37) (width 0.6) (layer F.Cu) (net 4))
(segment (start 39.25 82.25) (end 39.1 82.1) (width 0.6) (layer F.Cu) (net 4))
(segment (start 39.25 83.5) (end 39.25 82.25) (width 0.6) (layer F.Cu) (net 4))
(segment (start 39.75 84) (end 40.25 83.5) (width 0.6) (layer F.Cu) (net 4))
(segment (start 40.25 84.5) (end 40.25 83.5) (width 0.6) (layer B.Cu) (net 4))
(segment (start 40.25 83.5) (end 39.25 83.5) (width 0.6) (layer B.Cu) (net 4))
(segment (start 39.25 83.5) (end 39.25 84.5) (width 0.6) (layer B.Cu) (net 4))
(segment (start 39.25 84.5) (end 40.25 84.5) (width 0.6) (layer B.Cu) (net 4))
(segment (start 39.75 84) (end 40.25 84.5) (width 0.6) (layer B.Cu) (net 4))
(segment (start 39.25 83.5) (end 40.25 83.5) (width 0.6) (layer F.Cu) (net 4))
(segment (start 40.25 83.5) (end 40.25 84.5) (width 0.6) (layer F.Cu) (net 4))
(segment (start 40.25 84.5) (end 39.25 84.5) (width 0.6) (layer F.Cu) (net 4))
(segment (start 39.25 84.5) (end 39.25 83.5) (width 0.6) (layer F.Cu) (net 4))
(segment (start 41.5 84.5) (end 40.25 84.5) (width 0.6) (layer F.Cu) (net 4))
(segment (start 42 85) (end 41.5 84.5) (width 0.6) (layer F.Cu) (net 4))
(segment (start 29.23 94.146425) (end 29.23 94.499978) (width 0.3) (layer B.Cu) (net 4))
(segment (start 29.21 92.46) (end 29.23 92.48) (width 0.3) (layer B.Cu) (net 4))
(via (at 29.23 94.499978) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 4))
(segment (start 29.23 92.48) (end 29.23 94.146425) (width 0.3) (layer B.Cu) (net 4))
(segment (start 29.21 103.64) (end 29.21 94.519978) (width 0.3) (layer F.Cu) (net 4))
(segment (start 29.21 94.519978) (end 29.23 94.499978) (width 0.3) (layer F.Cu) (net 4))
(segment (start 49.36 94.64) (end 50.99 96.27) (width 0.6) (layer F.Cu) (net 4) (tstamp 5E054C03))
(via (at 49.36 94.64) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 4))
(segment (start 48.48 93.76) (end 49.36 94.64) (width 0.4) (layer B.Cu) (net 4))
(segment (start 23.96 85.5296) (end 19.985 81.5546) (width 0.6) (layer B.Cu) (net 4))
(via (at 19.8834 76.2714) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 4))
(segment (start 19.985 81.5546) (end 19.985 76.373) (width 0.6) (layer B.Cu) (net 4))
(segment (start 19.985 76.373) (end 19.8834 76.2714) (width 0.6) (layer B.Cu) (net 4))
(segment (start 20.8847 76.2714) (end 19.8834 76.2714) (width 0.6) (layer F.Cu) (net 4))
(segment (start 21 76.3867) (end 20.8847 76.2714) (width 0.6) (layer F.Cu) (net 4))
(segment (start 21 76.3867) (end 21 73) (width 1) (layer F.Cu) (net 4))
(segment (start 21 77.3118) (end 21 76.3867) (width 1) (layer F.Cu) (net 4))
(segment (start 28 78.25) (end 21.9382 78.25) (width 1) (layer F.Cu) (net 4))
(segment (start 21.9382 78.25) (end 21 77.3118) (width 1) (layer F.Cu) (net 4))
(segment (start 37 82.1) (end 31.85 82.1) (width 1) (layer F.Cu) (net 4) (status 10))
(segment (start 31.85 82.1) (end 28 78.25) (width 1) (layer F.Cu) (net 4))
(segment (start 22.757919 90.34) (end 23.96 90.34) (width 0.25) (layer B.Cu) (net 4) (status 20))
(segment (start 19.65 99.25) (end 18.75 99.25) (width 0.25) (layer B.Cu) (net 4) (status 10))
(segment (start 21.169998 90.34) (end 22.757919 90.34) (width 0.25) (layer B.Cu) (net 4))
(segment (start 18.75 99.25) (end 18.5 99) (width 0.25) (layer B.Cu) (net 4))
(segment (start 18.5 93.009998) (end 21.169998 90.34) (width 0.25) (layer B.Cu) (net 4))
(segment (start 18.5 99) (end 18.5 94.25) (width 0.25) (layer B.Cu) (net 4))
(segment (start 19.65 94.25) (end 18.5 94.25) (width 0.25) (layer B.Cu) (net 4) (status 10))
(segment (start 18.5 94.25) (end 18.5 93.009998) (width 0.25) (layer B.Cu) (net 4))
(segment (start 24 88) (end 24.925 88) (width 0.3) (layer B.Cu) (net 4) (status 20))
(segment (start 23.96 87.96) (end 24 88) (width 0.3) (layer B.Cu) (net 4))
(segment (start 23.96 90.34) (end 23.96 87.96) (width 0.6) (layer B.Cu) (net 4) (status 10))
(segment (start 23.96 87.96) (end 23.96 85.5296) (width 0.6) (layer B.Cu) (net 4))
(segment (start 64.1725 92.5375) (end 64.25 92.46) (width 0.4) (layer B.Cu) (net 4) (status 30))
(segment (start 62.25 92.5375) (end 64.1725 92.5375) (width 0.4) (layer B.Cu) (net 4) (status 30))
(segment (start 64.4975 92.2125) (end 64.25 92.46) (width 0.3) (layer B.Cu) (net 4))
(segment (start 66.5 92.2125) (end 64.4975 92.2125) (width 0.3) (layer B.Cu) (net 4))
(segment (start 40.25 85.150002) (end 47.479998 92.38) (width 0.6) (layer B.Cu) (net 4))
(segment (start 40.25 84.5) (end 40.25 85.150002) (width 0.6) (layer B.Cu) (net 4))
(segment (start 47.479998 92.38) (end 48.48 92.38) (width 0.6) (layer B.Cu) (net 4))
(segment (start 33.4025 68.2875) (end 33.81 67.88) (width 0.3) (layer B.Cu) (net 4))
(segment (start 32 68.2875) (end 33.4025 68.2875) (width 0.3) (layer B.Cu) (net 4))
Improve layout, change color of B.Silk and improve schematic
2020-01-12 14:56:58 +01:00
(segment (start 53 89.59) (end 51.045 91.545) (width 0.6) (layer F.Cu) (net 4))
(segment (start 53.4725 89.59) (end 53 89.59) (width 0.3) (layer F.Cu) (net 4))
(segment (start 56.175 88) (end 55.0625 88) (width 0.3) (layer F.Cu) (net 4))
(segment (start 55.0625 88) (end 53.4725 89.59) (width 0.3) (layer F.Cu) (net 4))
(segment (start 46.03 98.36) (end 46.21 98.54) (width 0.3) (layer F.Cu) (net 4))
(segment (start 46.21 98.54) (end 47.57 98.54) (width 0.3) (layer F.Cu) (net 4))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(segment (start 39.5 50.725) (end 39.5 50.2875) (width 0.6) (layer F.Cu) (net 4))
(segment (start 39.525 50.75) (end 39.5 50.725) (width 0.6) (layer F.Cu) (net 4))
(segment (start 48.75 50.75) (end 39.525 50.75) (width 0.6) (layer F.Cu) (net 4))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(segment (start 73 67.1) (end 73 64.875) (width 1) (layer F.Cu) (net 5) (status 30))
(segment (start 70.375 67.1) (end 70 67.475) (width 1) (layer F.Cu) (net 5) (status 30))
(segment (start 73 67.1) (end 70.375 67.1) (width 1) (layer F.Cu) (net 5) (status 30))
(segment (start 66.5 71.46) (end 66.5 70.975) (width 0.6) (layer F.Cu) (net 5) (status 30))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(segment (start 70.45 67.95) (end 69.9875 67.4875) (width 0.6) (layer F.Cu) (net 5))
(segment (start 70.45 73.1) (end 70.45 67.95) (width 0.6) (layer F.Cu) (net 5))
(segment (start 66.5 70.975) (end 69.9875 67.4875) (width 0.6) (layer F.Cu) (net 5))
(segment (start 69.9875 67.4875) (end 70 67.475) (width 0.6) (layer F.Cu) (net 5))
Re-annotate components
2020-02-05 18:58:36 +01:00
(segment (start 30.7875 93.5) (end 30.7875 95.5) (width 0.3) (layer B.Cu) (net 6) (status 30))
(segment (start 32.42 95.5) (end 32.5 95.42) (width 0.3) (layer B.Cu) (net 6) (status 30))
(segment (start 30.7875 95.5) (end 32.42 95.5) (width 0.3) (layer B.Cu) (net 6) (status 30))
(segment (start 53.5 101.675) (end 53.5 102.98) (width 0.3) (layer F.Cu) (net 6) (status 10))
(via (at 54.86 103.61) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 6))
(segment (start 53.5 102.98) (end 54.13 103.61) (width 0.3) (layer F.Cu) (net 6))
(segment (start 54.13 103.61) (end 54.86 103.61) (width 0.3) (layer F.Cu) (net 6))
(segment (start 54.26 104.21) (end 54.86 103.61) (width 0.25) (layer B.Cu) (net 6))
(segment (start 52.64 104.21) (end 54.26 104.21) (width 0.25) (layer B.Cu) (net 6))
(segment (start 38.85 101.77) (end 50.2 101.77) (width 0.3) (layer B.Cu) (net 6))
(segment (start 32.5 95.42) (end 38.85 101.77) (width 0.3) (layer B.Cu) (net 6) (status 10))
(segment (start 50.2 101.77) (end 52.64 104.21) (width 0.3) (layer B.Cu) (net 6))
(segment (start 30.7875 100.5) (end 32.5 100.5) (width 0.3) (layer B.Cu) (net 7) (status 30))
(segment (start 30.7875 102.5) (end 30.7875 100.5) (width 0.3) (layer B.Cu) (net 7) (status 30))
(segment (start 54 101.675) (end 54 102.73) (width 0.3) (layer F.Cu) (net 7) (status 10))
(via (at 55.7 103.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 7))
(segment (start 54 102.73) (end 54.27 103) (width 0.3) (layer F.Cu) (net 7))
(segment (start 54.27 103) (end 55.5 103) (width 0.3) (layer F.Cu) (net 7))
(segment (start 55.7 103.2) (end 55.7 103.75) (width 0.3) (layer F.Cu) (net 7))
(segment (start 55.5 103) (end 55.7 103.2) (width 0.3) (layer F.Cu) (net 7))
(segment (start 49.98 102.54) (end 52.44 105) (width 0.3) (layer B.Cu) (net 7))
(segment (start 34.54 102.54) (end 49.98 102.54) (width 0.3) (layer B.Cu) (net 7))
(segment (start 55.238001 105.000001) (end 55.7 104.538002) (width 0.3) (layer B.Cu) (net 7))
(segment (start 52.44 105) (end 55.238001 105.000001) (width 0.3) (layer B.Cu) (net 7))
(segment (start 32.5 100.5) (end 34.54 102.54) (width 0.3) (layer B.Cu) (net 7) (status 10))
(segment (start 55.7 104.538002) (end 55.7 104.103553) (width 0.3) (layer B.Cu) (net 7))
(segment (start 55.7 104.103553) (end 55.7 103.75) (width 0.3) (layer B.Cu) (net 7))
(segment (start 53 99.2875) (end 51.5 99.2875) (width 0.3) (layer B.Cu) (net 8) (status 30))
(segment (start 53 99.2875) (end 54.5 99.2875) (width 0.3) (layer B.Cu) (net 8) (status 30))
(via (at 53 100.000056) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 8))
(segment (start 52.5 100.500056) (end 53 100.000056) (width 0.3) (layer F.Cu) (net 8))
(segment (start 53 99.2875) (end 53 100.000056) (width 0.3) (layer B.Cu) (net 8) (status 10))
(segment (start 52.5 101.675) (end 52.5 100.500056) (width 0.3) (layer F.Cu) (net 8) (status 10))
(segment (start 32.88 92.5) (end 32.5 92.88) (width 0.3) (layer F.Cu) (net 9) (status 30))
(segment (start 40.825 92.5) (end 32.88 92.5) (width 0.3) (layer F.Cu) (net 9) (status 30))
(segment (start 32.62 93) (end 32.5 92.88) (width 0.3) (layer B.Cu) (net 9) (status 30))
(segment (start 34.7125 93) (end 32.62 93) (width 0.3) (layer B.Cu) (net 9) (status 30))
(segment (start 30.6125 68.6) (end 31.2125 68) (width 0.3) (layer F.Cu) (net 14) (status 20))
(segment (start 28 68.6) (end 30.6125 68.6) (width 0.3) (layer F.Cu) (net 14) (status 10))
(segment (start 47 65.97) (end 47 86.325) (width 0.3) (layer F.Cu) (net 14) (status 20))
(segment (start 44.39 63.36) (end 47 65.97) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.66 63.36) (end 44.39 63.36) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.46 64.198683) (end 38.526756 64.191161) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.752478 63.965439) (end 38.76 63.898683) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.526756 64.191161) (end 38.590165 64.168973) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.393243 64.191161) (end 38.46 64.198683) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.22545 64.085729) (end 38.272953 64.133232) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.352478 62.754561) (end 39.36 62.821317) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.190165 62.551027) (end 39.247046 62.586768) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.06 62.521317) (end 39.126756 62.528839) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.647046 64.133232) (end 38.694549 64.085729) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.16 63.898683) (end 38.167521 63.965439) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.329834 64.168973) (end 38.393243 64.191161) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.590165 64.168973) (end 38.647046 64.133232) (width 0.3) (layer F.Cu) (net 14))
(segment (start 37.86 63.36) (end 37.926756 63.367521) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.13029 63.529834) (end 38.152478 63.593243) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.82545 62.634271) (end 38.872953 62.586768) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.16 63.66) (end 38.16 63.898683) (width 0.3) (layer F.Cu) (net 14))
(segment (start 31.2125 68) (end 31.2125 67.525) (width 0.3) (layer F.Cu) (net 14) (status 30))
(segment (start 38.167521 63.965439) (end 38.189709 64.028848) (width 0.3) (layer F.Cu) (net 14))
(segment (start 37.926756 63.367521) (end 37.990165 63.389709) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.593243 63.352479) (end 39.66 63.36) (width 0.3) (layer F.Cu) (net 14))
(segment (start 31.2125 67.525) (end 35.3775 63.36) (width 0.3) (layer F.Cu) (net 14) (status 10))
(segment (start 37.990165 63.389709) (end 38.047046 63.42545) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.789709 62.691152) (end 38.82545 62.634271) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.094549 63.472953) (end 38.13029 63.529834) (width 0.3) (layer F.Cu) (net 14))
(segment (start 35.3775 63.36) (end 37.86 63.36) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.73029 64.028848) (end 38.752478 63.965439) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.76 63.898683) (end 38.76 62.821317) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.76 62.821317) (end 38.767521 62.754561) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.047046 63.42545) (end 38.094549 63.472953) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.767521 62.754561) (end 38.789709 62.691152) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.42545 63.247047) (end 39.472953 63.29455) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.872953 62.586768) (end 38.929834 62.551027) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.929834 62.551027) (end 38.993243 62.528839) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.694549 64.085729) (end 38.73029 64.028848) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.189709 64.028848) (end 38.22545 64.085729) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.993243 62.528839) (end 39.06 62.521317) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.36 63.06) (end 39.367521 63.126757) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.126756 62.528839) (end 39.190165 62.551027) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.247046 62.586768) (end 39.294549 62.634271) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.472953 63.29455) (end 39.529834 63.330291) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.294549 62.634271) (end 39.33029 62.691152) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.272953 64.133232) (end 38.329834 64.168973) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.389709 63.190166) (end 39.42545 63.247047) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.367521 63.126757) (end 39.389709 63.190166) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.33029 62.691152) (end 39.352478 62.754561) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.36 62.821317) (end 39.36 63.06) (width 0.3) (layer F.Cu) (net 14))
(segment (start 38.152478 63.593243) (end 38.16 63.66) (width 0.3) (layer F.Cu) (net 14))
(segment (start 39.529834 63.330291) (end 39.593243 63.352479) (width 0.3) (layer F.Cu) (net 14))
(segment (start 31.0125 69.7) (end 31.2125 69.5) (width 0.3) (layer F.Cu) (net 15) (status 30))
(segment (start 28 69.7) (end 31.0125 69.7) (width 0.3) (layer F.Cu) (net 15) (status 30))
(via (at 25.88 69.47) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 15))
(segment (start 28 69.7) (end 26.11 69.7) (width 0.3) (layer F.Cu) (net 15) (status 10))
(segment (start 26.11 69.7) (end 25.88 69.47) (width 0.3) (layer F.Cu) (net 15))
(via (at 42.86 92.26) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 15))
(segment (start 47.5 86.325) (end 47.5 87.62) (width 0.3) (layer F.Cu) (net 15) (status 10))
(segment (start 47.5 87.62) (end 43.109999 92.010001) (width 0.3) (layer F.Cu) (net 15))
(segment (start 43.109999 92.010001) (end 42.86 92.26) (width 0.3) (layer F.Cu) (net 15))
(segment (start 28.658992 72.238355) (end 28.606471 72.196471) (width 0.3) (layer B.Cu) (net 15))
(segment (start 28.785013 72.282452) (end 28.719518 72.267503) (width 0.3) (layer B.Cu) (net 15))
(segment (start 28.852191 72.282452) (end 28.785013 72.282452) (width 0.3) (layer B.Cu) (net 15))
(segment (start 28.917686 72.267503) (end 28.852191 72.282452) (width 0.3) (layer B.Cu) (net 15))
(segment (start 28.978212 72.238355) (end 28.917686 72.267503) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.030734 72.19647) (end 28.978212 72.238355) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.102699 72.124506) (end 29.030734 72.19647) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.155222 72.08262) (end 29.102699 72.124506) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.215748 72.053473) (end 29.155222 72.08262) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.281242 72.038524) (end 29.215748 72.053473) (width 0.3) (layer B.Cu) (net 15))
(segment (start 28.606471 72.196471) (end 27.752909 71.342909) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.413114 72.673258) (end 29.455 72.620735) (width 0.3) (layer B.Cu) (net 15))
(segment (start 27.752909 71.342909) (end 25.88 69.47) (width 0.3) (layer B.Cu) (net 15))
(segment (start 32.5 83.9825) (end 32.5 76.09) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.348421 72.038524) (end 29.281242 72.038524) (width 0.3) (layer B.Cu) (net 15))
(segment (start 40.7775 92.26) (end 32.5 83.9825) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.383967 72.931951) (end 29.369018 72.866457) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.597997 72.435722) (end 29.612946 72.370227) (width 0.3) (layer B.Cu) (net 15))
(segment (start 42.86 92.26) (end 40.7775 92.26) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.383967 72.733784) (end 29.413114 72.673258) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.526964 72.124506) (end 29.474441 72.08262) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.597997 72.237554) (end 29.568849 72.177028) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.369018 72.799278) (end 29.383967 72.733784) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.369018 72.866457) (end 29.369018 72.799278) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.612946 72.370227) (end 29.612946 72.303049) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.413114 72.992477) (end 29.383967 72.931951) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.568849 72.496248) (end 29.597997 72.435722) (width 0.3) (layer B.Cu) (net 15))
(segment (start 28.719518 72.267503) (end 28.658992 72.238355) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.455 73.045) (end 29.413114 72.992477) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.526964 72.54877) (end 29.568849 72.496248) (width 0.3) (layer B.Cu) (net 15))
(segment (start 32.5 76.09) (end 29.455 73.045) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.455 72.620735) (end 29.526964 72.54877) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.612946 72.303049) (end 29.597997 72.237554) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.568849 72.177028) (end 29.526964 72.124506) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.474441 72.08262) (end 29.413915 72.053473) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.413915 72.053473) (end 29.348421 72.038524) (width 0.3) (layer B.Cu) (net 15))
(segment (start 30 71) (end 31.2125 71) (width 0.3) (layer F.Cu) (net 16) (status 20))
(segment (start 28 71.9) (end 29.1 71.9) (width 0.3) (layer F.Cu) (net 16) (status 10))
(segment (start 29.1 71.9) (end 30 71) (width 0.3) (layer F.Cu) (net 16))
(via (at 30.83 85.24) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 16))
(via (at 26 71.92) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 16))
(segment (start 27.98 71.92) (end 28 71.9) (width 0.3) (layer F.Cu) (net 16) (status 30))
(segment (start 26 71.92) (end 27.98 71.92) (width 0.3) (layer F.Cu) (net 16) (status 20))
(segment (start 30.83 85.42) (end 30.83 85.24) (width 0.3) (layer F.Cu) (net 16))
(segment (start 40.825 90) (end 35.41 90) (width 0.3) (layer F.Cu) (net 16) (status 10))
(segment (start 35.41 90) (end 30.83 85.42) (width 0.3) (layer F.Cu) (net 16))
(segment (start 26.17 71.92) (end 26 71.92) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.5 76.25) (end 26.17 71.92) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.43455 77.787046) (end 30.470291 77.730165) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.387047 77.834549) (end 30.43455 77.787046) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.330166 77.87029) (end 30.387047 77.834549) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.266757 77.892478) (end 30.330166 77.87029) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.2 77.9) (end 30.266757 77.892478) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.84159 77.9) (end 30.2 77.9) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.774834 77.907521) (end 29.84159 77.9) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.711425 77.929709) (end 29.774834 77.907521) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.774834 78.492478) (end 29.711425 78.47029) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.84159 78.5) (end 29.774834 78.492478) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.10841 78.5) (end 29.84159 78.5) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.295456 78.56545) (end 31.238575 78.529709) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.342959 78.612953) (end 31.295456 78.56545) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.3787 78.669834) (end 31.342959 78.612953) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.400888 78.866756) (end 31.40841 78.8) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.342959 78.987046) (end 31.3787 78.930165) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.295456 79.034549) (end 31.342959 78.987046) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.238575 79.07029) (end 31.295456 79.034549) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.54159 78.2) (end 29.549112 78.133243) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.175166 79.092478) (end 31.238575 79.07029) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.3787 81.330165) (end 31.400888 81.266756) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.238575 79.729709) (end 31.175166 79.707521) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.5713 78.330165) (end 29.549112 78.266756) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.84159 79.1) (end 31.10841 79.1) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.238575 81.47029) (end 31.295456 81.434549) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.295456 82.16545) (end 31.238575 82.129709) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.607041 78.387046) (end 29.5713 78.330165) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.774834 79.107521) (end 29.84159 79.1) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.175166 81.492478) (end 31.238575 81.47029) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.711425 79.129709) (end 29.774834 79.107521) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.10841 81.5) (end 31.175166 81.492478) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.10841 80.3) (end 31.175166 80.292478) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.5713 81.669834) (end 29.607041 81.612953) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.549112 81.866756) (end 29.54159 81.8) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.400888 81.266756) (end 31.40841 81.2) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.654544 81.56545) (end 29.711425 81.529709) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.470291 77.730165) (end 30.492479 77.666756) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.238575 80.929709) (end 31.175166 80.907521) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.607041 81.987046) (end 29.5713 81.930165) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.175166 78.507521) (end 31.10841 78.5) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.295456 80.96545) (end 31.238575 80.929709) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.654544 82.034549) (end 29.607041 81.987046) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.711425 78.47029) (end 29.654544 78.434549) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.654544 79.634549) (end 29.607041 79.587046) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.40841 82.4) (end 31.400888 82.333243) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.774834 82.092478) (end 29.711425 82.07029) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.549112 80.533243) (end 29.5713 80.469834) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.84159 82.1) (end 29.774834 82.092478) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.175166 82.107521) (end 31.10841 82.1) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.5 83) (end 30.507521 82.933243) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.654544 78.434549) (end 29.607041 78.387046) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.400888 82.333243) (end 31.3787 82.269834) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.711425 81.529709) (end 29.774834 81.507521) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.400888 79.933243) (end 31.3787 79.869834) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.5 84.91) (end 30.5 83) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.342959 81.387046) (end 31.3787 81.330165) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.84159 80.9) (end 29.774834 80.892478) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.549112 78.266756) (end 29.54159 78.2) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.10841 79.1) (end 31.175166 79.092478) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.295456 81.434549) (end 31.342959 81.387046) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.5713 80.469834) (end 29.607041 80.412953) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.612953 82.76545) (end 30.669834 82.729709) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.238575 82.67029) (end 31.295456 82.634549) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.549112 81.733243) (end 29.5713 81.669834) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.238575 78.529709) (end 31.175166 78.507521) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.711425 82.07029) (end 29.654544 82.034549) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.342959 81.012953) (end 31.295456 80.96545) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.733243 82.707521) (end 30.8 82.7) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.549112 78.133243) (end 29.5713 78.069834) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.295456 82.634549) (end 31.342959 82.587046) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.10841 82.1) (end 29.84159 82.1) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.54159 81.8) (end 29.549112 81.733243) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.5713 78.069834) (end 29.607041 78.012953) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.342959 82.587046) (end 31.3787 82.530165) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.83 85.24) (end 30.5 84.91) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.607041 78.012953) (end 29.654544 77.96545) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.3787 82.530165) (end 31.400888 82.466756) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.10841 82.7) (end 31.175166 82.692478) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.607041 81.612953) (end 29.654544 81.56545) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.774834 79.692478) (end 29.711425 79.67029) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.175166 82.692478) (end 31.238575 82.67029) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.84159 80.3) (end 31.10841 80.3) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.40841 80) (end 31.400888 79.933243) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.711425 79.67029) (end 29.654544 79.634549) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.40841 78.8) (end 31.400888 78.733243) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.10841 79.7) (end 29.84159 79.7) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.607041 79.587046) (end 29.5713 79.530165) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.654544 77.96545) (end 29.711425 77.929709) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.400888 82.466756) (end 31.40841 82.4) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.56545 82.812953) (end 30.612953 82.76545) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.529709 82.869834) (end 30.56545 82.812953) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.3787 78.930165) (end 31.400888 78.866756) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.238575 82.129709) (end 31.175166 82.107521) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.711425 80.329709) (end 29.774834 80.307521) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.40841 81.2) (end 31.400888 81.133243) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.5 77.6) (end 30.5 76.25) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.3787 81.069834) (end 31.342959 81.012953) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.5713 81.930165) (end 29.549112 81.866756) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.175166 80.907521) (end 31.10841 80.9) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.175166 80.292478) (end 31.238575 80.27029) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.507521 82.933243) (end 30.529709 82.869834) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.10841 80.9) (end 29.84159 80.9) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.774834 80.892478) (end 29.711425 80.87029) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.711425 80.87029) (end 29.654544 80.834549) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.342959 80.187046) (end 31.3787 80.130165) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.654544 80.834549) (end 29.607041 80.787046) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.3787 80.130165) (end 31.400888 80.066756) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.607041 80.787046) (end 29.5713 80.730165) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.400888 80.066756) (end 31.40841 80) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.5713 80.730165) (end 29.549112 80.666756) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.549112 80.666756) (end 29.54159 80.6) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.238575 80.27029) (end 31.295456 80.234549) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.8 82.7) (end 31.10841 82.7) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.54159 80.6) (end 29.549112 80.533243) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.3787 82.269834) (end 31.342959 82.212953) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.774834 81.507521) (end 29.84159 81.5) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.607041 80.412953) (end 29.654544 80.36545) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.342959 82.212953) (end 31.295456 82.16545) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.84159 81.5) (end 31.10841 81.5) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.654544 80.36545) (end 29.711425 80.329709) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.492479 77.666756) (end 30.5 77.6) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.400888 81.133243) (end 31.3787 81.069834) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.774834 80.307521) (end 29.84159 80.3) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.295456 80.234549) (end 31.342959 80.187046) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.549112 79.333243) (end 29.5713 79.269834) (width 0.3) (layer B.Cu) (net 16))
(segment (start 30.669834 82.729709) (end 30.733243 82.707521) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.342959 79.812953) (end 31.295456 79.76545) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.5713 79.269834) (end 29.607041 79.212953) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.295456 79.76545) (end 31.238575 79.729709) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.607041 79.212953) (end 29.654544 79.16545) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.175166 79.707521) (end 31.10841 79.7) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.400888 78.733243) (end 31.3787 78.669834) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.84159 79.7) (end 29.774834 79.692478) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.5713 79.530165) (end 29.549112 79.466756) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.549112 79.466756) (end 29.54159 79.4) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.3787 79.869834) (end 31.342959 79.812953) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.54159 79.4) (end 29.549112 79.333243) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.654544 79.16545) (end 29.711425 79.129709) (width 0.3) (layer B.Cu) (net 16))
(segment (start 31.1125 74.1) (end 31.2125 74) (width 0.3) (layer F.Cu) (net 17) (status 30))
(segment (start 28 74.1) (end 31.1125 74.1) (width 0.3) (layer F.Cu) (net 17) (status 30))
(via (at 29.89 85.51) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 17))
(via (at 26.48 74.11) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 17))
(segment (start 27.99 74.11) (end 28 74.1) (width 0.3) (layer F.Cu) (net 17) (status 30))
(segment (start 26.48 74.11) (end 27.99 74.11) (width 0.3) (layer F.Cu) (net 17) (status 20))
(segment (start 29 84.62) (end 29.89 85.51) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27 82) (end 29 84) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.887046 81.06545) (end 26.934549 81.112953) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.830165 81.029709) (end 26.887046 81.06545) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.7 81) (end 26.766756 81.007521) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.3 81) (end 26.7 81) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.112953 80.934549) (end 26.169834 80.97029) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.06545 80.887046) (end 26.112953 80.934549) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.029709 80.830165) (end 26.06545 80.887046) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.112953 80.46545) (end 26.06545 80.512953) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.3 80.4) (end 26.233243 80.407521) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.7 80.4) (end 26.3 80.4) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.830166 80.37029) (end 27.766757 80.392478) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.007521 78.233243) (end 26 78.3) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.992478 81.233243) (end 27 81.3) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.169834 78.029709) (end 26.112953 78.06545) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.233243 80.992478) (end 26.3 81) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.112953 77.334549) (end 26.169834 77.37029) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.233243 78.007521) (end 26.169834 78.029709) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.112953 79.734549) (end 26.169834 79.77029) (width 0.3) (layer B.Cu) (net 17))
(segment (start 28 78.9) (end 27.992479 78.966756) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.830166 77.429709) (end 27.887047 77.46545) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.06545 78.112953) (end 26.029709 78.169834) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.3 77.4) (end 27.7 77.4) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.029709 78.169834) (end 26.007521 78.233243) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.887047 77.934549) (end 27.830166 77.97029) (width 0.3) (layer B.Cu) (net 17))
(segment (start 28 77.7) (end 27.992479 77.766756) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.934549 81.112953) (end 26.97029 81.169834) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.007521 79.433243) (end 26 79.5) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.169834 79.77029) (end 26.233243 79.792478) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.112953 78.06545) (end 26.06545 78.112953) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.7 78) (end 26.3 78) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.93455 77.512953) (end 27.970291 77.569834) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.97029 81.169834) (end 26.992478 81.233243) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.830165 76.77029) (end 26.766756 76.792478) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.93455 80.287046) (end 27.887047 80.334549) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.970291 79.969834) (end 27.992479 80.033243) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.887046 76.734549) (end 26.830165 76.77029) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27 76.5) (end 26.992478 76.566756) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27 74.63) (end 27 76.5) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.233243 77.392478) (end 26.3 77.4) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.007521 77.166756) (end 26.029709 77.230165) (width 0.3) (layer B.Cu) (net 17))
(segment (start 29 84) (end 29 84.62) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.766757 77.992478) (end 27.7 78) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.233243 79.792478) (end 26.3 79.8) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.830166 79.829709) (end 27.887047 79.86545) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.48 74.11) (end 27 74.63) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26 77.1) (end 26.007521 77.166756) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27 81.3) (end 27 82) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.766757 77.407521) (end 27.830166 77.429709) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.992479 78.833243) (end 28 78.9) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.934549 76.687046) (end 26.887046 76.734549) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.970291 77.830165) (end 27.93455 77.887046) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.830166 77.97029) (end 27.766757 77.992478) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.169834 80.97029) (end 26.233243 80.992478) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26 80.7) (end 26.007521 80.766756) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.3 76.8) (end 26.233243 76.807521) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.3 78) (end 26.233243 78.007521) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.887047 77.46545) (end 27.93455 77.512953) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.029709 79.630165) (end 26.06545 79.687046) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.029709 77.230165) (end 26.06545 77.287046) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.233243 78.592478) (end 26.3 78.6) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.233243 79.207521) (end 26.169834 79.229709) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.766756 76.792478) (end 26.7 76.8) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.7 76.8) (end 26.3 76.8) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.766757 80.392478) (end 27.7 80.4) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.830166 78.629709) (end 27.887047 78.66545) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.007521 80.766756) (end 26.029709 80.830165) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.887047 79.86545) (end 27.93455 79.912953) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.992479 78.966756) (end 27.970291 79.030165) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.7 77.4) (end 27.766757 77.407521) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.93455 79.087046) (end 27.887047 79.134549) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.97029 76.630165) (end 26.934549 76.687046) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.007521 80.633243) (end 26 80.7) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.029709 80.569834) (end 26.007521 80.633243) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.112953 79.26545) (end 26.06545 79.312953) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.233243 76.807521) (end 26.169834 76.829709) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.7 79.8) (end 27.766757 79.807521) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.169834 77.37029) (end 26.233243 77.392478) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.169834 76.829709) (end 26.112953 76.86545) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.06545 77.287046) (end 26.112953 77.334549) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.887047 79.134549) (end 27.830166 79.17029) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.992478 76.566756) (end 26.97029 76.630165) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.06545 76.912953) (end 26.029709 76.969834) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.992479 77.766756) (end 27.970291 77.830165) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.7 79.2) (end 26.3 79.2) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.007521 77.033243) (end 26 77.1) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.766756 81.007521) (end 26.830165 81.029709) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26 78.3) (end 26.007521 78.366756) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.06545 80.512953) (end 26.029709 80.569834) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.007521 78.366756) (end 26.029709 78.430165) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.169834 80.429709) (end 26.112953 80.46545) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.06545 78.487046) (end 26.112953 78.534549) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.169834 78.57029) (end 26.233243 78.592478) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.93455 78.712953) (end 27.970291 78.769834) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.3 78.6) (end 27.7 78.6) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.7 78.6) (end 27.766757 78.607521) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.112953 78.534549) (end 26.169834 78.57029) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.766757 78.607521) (end 27.830166 78.629709) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.887047 78.66545) (end 27.93455 78.712953) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.029709 78.430165) (end 26.06545 78.487046) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.970291 78.769834) (end 27.992479 78.833243) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.3 79.8) (end 27.7 79.8) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.970291 79.030165) (end 27.93455 79.087046) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.830166 79.17029) (end 27.766757 79.192478) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.766757 79.192478) (end 27.7 79.2) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.992479 77.633243) (end 28 77.7) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.3 79.2) (end 26.233243 79.207521) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.970291 77.569834) (end 27.992479 77.633243) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.169834 79.229709) (end 26.112953 79.26545) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26 79.5) (end 26.007521 79.566756) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.029709 79.369834) (end 26.007521 79.433243) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.06545 79.312953) (end 26.029709 79.369834) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.93455 77.887046) (end 27.887047 77.934549) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.007521 79.566756) (end 26.029709 79.630165) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.06545 79.687046) (end 26.112953 79.734549) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.766757 79.807521) (end 27.830166 79.829709) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.992479 80.033243) (end 28 80.1) (width 0.3) (layer B.Cu) (net 17))
(segment (start 28 80.1) (end 27.992479 80.166756) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.233243 80.407521) (end 26.169834 80.429709) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.93455 79.912953) (end 27.970291 79.969834) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.992479 80.166756) (end 27.970291 80.230165) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.112953 76.86545) (end 26.06545 76.912953) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.970291 80.230165) (end 27.93455 80.287046) (width 0.3) (layer B.Cu) (net 17))
(segment (start 26.029709 76.969834) (end 26.007521 77.033243) (width 0.3) (layer B.Cu) (net 17))
(segment (start 27.887047 80.334549) (end 27.830166 80.37029) (width 0.3) (layer B.Cu) (net 17))
(segment (start 29.9 85.51) (end 29.89 85.51) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.16545 90.612953) (end 38.129709 90.669834) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.506268 91.805631) (end 37.493731 91.69437) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.4 90.5) (end 38.333243 90.507521) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.530165 90.529709) (end 38.466756 90.507521) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.587046 90.56545) (end 38.530165 90.529709) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.269834 90.529709) (end 38.212953 90.56545) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.129709 90.669834) (end 38.107521 90.733243) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.75 92) (end 37.694369 91.993732) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.869834 91.47029) (end 38.812953 91.434549) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.812953 91.434549) (end 38.76545 91.387046) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.67029 90.669834) (end 38.634549 90.612953) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.333243 90.507521) (end 38.269834 90.529709) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.1 90.8) (end 38.1 91.75) (width 0.3) (layer F.Cu) (net 17))
(segment (start 35.89 91.5) (end 29.9 85.51) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.692478 90.733243) (end 38.67029 90.669834) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.85 92) (end 37.75 92) (width 0.3) (layer F.Cu) (net 17))
(segment (start 39 91.5) (end 38.933243 91.492478) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.107521 90.733243) (end 38.1 90.8) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.466756 90.507521) (end 38.4 90.5) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.76545 91.387046) (end 38.729709 91.330165) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.7 90.8) (end 38.692478 90.733243) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.212953 90.56545) (end 38.16545 90.612953) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.707521 91.266756) (end 38.7 91.2) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.7 91.2) (end 38.7 90.8) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.1 91.75) (end 38.093731 91.805631) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.093731 91.805631) (end 38.075242 91.858471) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.045457 91.905873) (end 38.005872 91.945458) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.95847 91.975243) (end 37.90563 91.993732) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.933243 91.492478) (end 38.869834 91.47029) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.005872 91.945458) (end 37.95847 91.975243) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.90563 91.993732) (end 37.85 92) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.694369 91.993732) (end 37.641529 91.975243) (width 0.3) (layer F.Cu) (net 17))
(segment (start 40.825 91.5) (end 39 91.5) (width 0.3) (layer F.Cu) (net 17) (status 10))
(segment (start 37.641529 91.975243) (end 37.594127 91.945458) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.594127 91.945458) (end 37.554542 91.905873) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.35847 91.524758) (end 37.30563 91.506269) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.634549 90.612953) (end 38.587046 90.56545) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.554542 91.905873) (end 37.524757 91.858471) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.075242 91.858471) (end 38.045457 91.905873) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.445457 91.594128) (end 37.405872 91.554543) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.524757 91.858471) (end 37.506268 91.805631) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.493731 91.69437) (end 37.475242 91.64153) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.475242 91.64153) (end 37.445457 91.594128) (width 0.3) (layer F.Cu) (net 17))
(segment (start 38.729709 91.330165) (end 38.707521 91.266756) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.405872 91.554543) (end 37.35847 91.524758) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.30563 91.506269) (end 37.25 91.5) (width 0.3) (layer F.Cu) (net 17))
(segment (start 37.25 91.5) (end 35.89 91.5) (width 0.3) (layer F.Cu) (net 17))
(segment (start 30.9125 75.2) (end 31.2125 75.5) (width 0.3) (layer F.Cu) (net 18) (status 30))
(segment (start 28 75.2) (end 30.9125 75.2) (width 0.3) (layer F.Cu) (net 18) (status 30))
(via (at 26.13 75.26) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 18))
(segment (start 27.94 75.26) (end 28 75.2) (width 0.3) (layer F.Cu) (net 18) (status 30))
(segment (start 26.13 75.26) (end 27.94 75.26) (width 0.3) (layer F.Cu) (net 18) (status 20))
(via (at 33.5 86.99) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 18))
(segment (start 40.825 89.5) (end 36.01 89.5) (width 0.3) (layer F.Cu) (net 18) (status 10))
(segment (start 33.749999 87.239999) (end 33.5 86.99) (width 0.3) (layer F.Cu) (net 18))
(segment (start 36.01 89.5) (end 33.749999 87.239999) (width 0.3) (layer F.Cu) (net 18))
(segment (start 23.899999 76.600001) (end 23.899999 75.600001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.892477 76.666757) (end 23.899999 76.600001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.834548 76.787047) (end 23.870289 76.730166) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.730164 76.870291) (end 23.787045 76.83455) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.666755 76.892479) (end 23.730164 76.870291) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.012952 76.965451) (end 23.069833 76.92971) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.965449 77.012954) (end 23.012952 76.965451) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.929708 77.069835) (end 22.965449 77.012954) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.90752 77.133244) (end 22.929708 77.069835) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.929708 77.330166) (end 22.90752 77.266757) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.069833 77.470291) (end 23.012952 77.43455) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.787045 76.83455) (end 23.834548 76.787047) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.133242 77.492479) (end 23.069833 77.470291) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.199999 77.500001) (end 23.133242 77.492479) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.149999 77.500001) (end 23.199999 77.500001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.20563 77.506269) (end 24.149999 77.500001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.25847 77.524758) (end 24.20563 77.506269) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.375242 77.64153) (end 24.345457 77.594128) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.399999 77.850001) (end 24.399999 77.750001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.375242 77.958471) (end 24.393731 77.905631) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.345457 78.005873) (end 24.375242 77.958471) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.25847 78.075243) (end 24.305872 78.045458) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.012952 77.43455) (end 22.965449 77.387047) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.20563 78.093732) (end 24.25847 78.075243) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.149999 78.100001) (end 24.20563 78.093732) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.199999 78.100001) (end 24.149999 78.100001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.069833 78.12971) (end 23.133242 78.107522) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.012952 78.165451) (end 23.069833 78.12971) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.965449 78.212954) (end 23.012952 78.165451) (width 0.3) (layer B.Cu) (net 18))
(segment (start 30.71 86.99) (end 29.99 86.99) (width 0.3) (layer B.Cu) (net 18))
(segment (start 30.840165 87.01971) (end 30.776756 86.997522) (width 0.3) (layer B.Cu) (net 18))
(segment (start 32.202478 86.223243) (end 32.18029 86.159834) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.393731 77.905631) (end 24.399999 77.850001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 32.239709 86.820165) (end 32.217521 86.756756) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.002478 87.223244) (end 30.98029 87.159835) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.122953 87.92455) (end 31.07545 87.877047) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.133242 78.107522) (end 23.199999 78.100001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 30.897046 87.055451) (end 30.840165 87.01971) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.243243 87.982479) (end 31.179834 87.960291) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.01 87.69) (end 31.01 87.29) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.133242 79.307522) (end 23.199999 79.300001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.440165 87.960291) (end 31.376756 87.982479) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.544549 87.877047) (end 31.497046 87.92455) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.199999 78.700001) (end 23.133242 78.692479) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.017521 87.756757) (end 31.01 87.69) (width 0.3) (layer B.Cu) (net 18))
(segment (start 32.21 86.29) (end 32.202478 86.223243) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.345457 77.594128) (end 24.305872 77.554543) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.07545 87.877047) (end 31.039709 87.820166) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.602478 87.756757) (end 31.58029 87.820166) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.834549 79.187047) (end 24.87029 79.130166) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.965449 77.387047) (end 22.929708 77.330166) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.133242 78.692479) (end 23.069833 78.670291) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.497046 87.92455) (end 31.440165 87.960291) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.133242 76.907522) (end 23.199999 76.900001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.393731 77.69437) (end 24.375242 77.64153) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.61 86.29) (end 31.61 87.69) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.639709 86.159834) (end 31.617521 86.223243) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.779834 86.019709) (end 31.722953 86.05545) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.01 87.29) (end 31.002478 87.223244) (width 0.3) (layer B.Cu) (net 18))
(segment (start 32.322953 86.924549) (end 32.27545 86.877046) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.61 87.69) (end 31.602478 87.756757) (width 0.3) (layer B.Cu) (net 18))
(segment (start 32.21 86.69) (end 32.21 86.29) (width 0.3) (layer B.Cu) (net 18))
(segment (start 32.379834 86.96029) (end 32.322953 86.924549) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.31 87.99) (end 31.243243 87.982479) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.399999 77.750001) (end 24.393731 77.69437) (width 0.3) (layer B.Cu) (net 18))
(segment (start 32.27545 86.877046) (end 32.239709 86.820165) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.730165 78.72971) (end 24.666756 78.707522) (width 0.3) (layer B.Cu) (net 18))
(segment (start 32.144549 86.102953) (end 32.097046 86.05545) (width 0.3) (layer B.Cu) (net 18))
(segment (start 33.5 86.99) (end 32.51 86.99) (width 0.3) (layer B.Cu) (net 18))
(segment (start 32.097046 86.05545) (end 32.040165 86.019709) (width 0.3) (layer B.Cu) (net 18))
(segment (start 30.776756 86.997522) (end 30.71 86.99) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.87029 79.130166) (end 24.892478 79.066757) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.133242 79.892479) (end 23.069833 79.870291) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.305872 78.045458) (end 24.345457 78.005873) (width 0.3) (layer B.Cu) (net 18))
(segment (start 30.944549 87.102954) (end 30.897046 87.055451) (width 0.3) (layer B.Cu) (net 18))
(segment (start 32.443243 86.982478) (end 32.379834 86.96029) (width 0.3) (layer B.Cu) (net 18))
(segment (start 29.99 86.99) (end 23.899999 80.899999) (width 0.3) (layer B.Cu) (net 18))
(segment (start 32.217521 86.756756) (end 32.21 86.69) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.899999 75.600001) (end 24.5 75) (width 0.3) (layer B.Cu) (net 18))
(segment (start 32.51 86.99) (end 32.443243 86.982478) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.012952 79.83455) (end 22.965449 79.787047) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.5 75) (end 25.87 75) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.67545 86.102953) (end 31.639709 86.159834) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.722953 86.05545) (end 31.67545 86.102953) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.599999 76.900001) (end 23.666755 76.892479) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.599999 78.700001) (end 23.199999 78.700001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.843243 85.997521) (end 31.779834 86.019709) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.179834 87.960291) (end 31.122953 87.92455) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.91 85.99) (end 31.843243 85.997521) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.617521 86.223243) (end 31.61 86.29) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.870289 80.069835) (end 23.834548 80.012954) (width 0.3) (layer B.Cu) (net 18))
(segment (start 30.98029 87.159835) (end 30.944549 87.102954) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.834548 80.012954) (end 23.787045 79.965451) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.069833 76.92971) (end 23.133242 76.907522) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.730164 79.92971) (end 23.666755 79.907522) (width 0.3) (layer B.Cu) (net 18))
(segment (start 32.18029 86.159834) (end 32.144549 86.102953) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.787046 78.765451) (end 24.730165 78.72971) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.899999 80.899999) (end 23.899999 80.200001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.899999 80.200001) (end 23.892477 80.133244) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.892477 80.133244) (end 23.870289 80.069835) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.899999 79.600001) (end 22.90752 79.533244) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.90752 79.533244) (end 22.929708 79.469835) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.976756 85.997521) (end 31.91 85.99) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.666755 79.907522) (end 23.599999 79.900001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.787045 79.965451) (end 23.730164 79.92971) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.199999 79.900001) (end 23.133242 79.892479) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.376756 87.982479) (end 31.31 87.99) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.965449 79.412954) (end 23.012952 79.365451) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.870289 76.730166) (end 23.892477 76.666757) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.069833 79.870291) (end 23.012952 79.83455) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.965449 79.787047) (end 22.929708 79.730166) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.58029 87.820166) (end 31.544549 87.877047) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.929708 79.730166) (end 22.90752 79.666757) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.90752 79.666757) (end 22.899999 79.600001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 32.040165 86.019709) (end 31.976756 85.997521) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.929708 79.469835) (end 22.965449 79.412954) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.90752 77.266757) (end 22.899999 77.200001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.305872 77.554543) (end 24.25847 77.524758) (width 0.3) (layer B.Cu) (net 18))
(segment (start 31.039709 87.820166) (end 31.017521 87.756757) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.012952 79.365451) (end 23.069833 79.32971) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.069833 79.32971) (end 23.133242 79.307522) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.199999 79.300001) (end 24.599999 79.300001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.599999 79.300001) (end 24.666756 79.292479) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.730165 79.270291) (end 24.787046 79.23455) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.199999 76.900001) (end 23.599999 76.900001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.666756 79.292479) (end 24.730165 79.270291) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.90752 78.466757) (end 22.899999 78.400001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.787046 79.23455) (end 24.834549 79.187047) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.90752 78.333244) (end 22.929708 78.269835) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.892478 79.066757) (end 24.899999 79.000001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.899999 77.200001) (end 22.90752 77.133244) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.899999 79.000001) (end 24.892478 78.933244) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.892478 78.933244) (end 24.87029 78.869835) (width 0.3) (layer B.Cu) (net 18))
(segment (start 25.87 75) (end 26.13 75.26) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.87029 78.869835) (end 24.834549 78.812954) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.834549 78.812954) (end 24.787046 78.765451) (width 0.3) (layer B.Cu) (net 18))
(segment (start 24.666756 78.707522) (end 24.599999 78.700001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.599999 79.900001) (end 23.199999 79.900001) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.069833 78.670291) (end 23.012952 78.63455) (width 0.3) (layer B.Cu) (net 18))
(segment (start 23.012952 78.63455) (end 22.965449 78.587047) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.965449 78.587047) (end 22.929708 78.530166) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.929708 78.530166) (end 22.90752 78.466757) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.899999 78.400001) (end 22.90752 78.333244) (width 0.3) (layer B.Cu) (net 18))
(segment (start 22.929708 78.269835) (end 22.965449 78.212954) (width 0.3) (layer B.Cu) (net 18))
(segment (start 28 76.3) (end 29.55 76.3) (width 0.3) (layer F.Cu) (net 19) (status 10))
(segment (start 30.25 77) (end 31.2125 77) (width 0.3) (layer F.Cu) (net 19) (status 20))
(segment (start 29.55 76.3) (end 30.25 77) (width 0.3) (layer F.Cu) (net 19))
(via (at 34.06 84.38) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 19))
(segment (start 34.06 84.38) (end 33.250001 83.570001) (width 0.3) (layer B.Cu) (net 19))
(via (at 33.5 79) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 19))
(segment (start 33.250001 79.249999) (end 33.5 79) (width 0.3) (layer B.Cu) (net 19))
(segment (start 33.250001 83.570001) (end 33.250001 79.249999) (width 0.3) (layer B.Cu) (net 19))
(segment (start 38.326447 89) (end 34.06 84.733553) (width 0.3) (layer F.Cu) (net 19))
(segment (start 40.825 89) (end 38.326447 89) (width 0.3) (layer F.Cu) (net 19) (status 10))
(segment (start 34.06 84.733553) (end 34.06 84.38) (width 0.3) (layer F.Cu) (net 19))
(segment (start 29.55 77.175) (end 31.375 79) (width 0.3) (layer F.Cu) (net 19))
(segment (start 29.55 76.3) (end 29.55 77.175) (width 0.3) (layer F.Cu) (net 19))
(segment (start 31.375 79) (end 33.5 79) (width 0.3) (layer F.Cu) (net 19))
(segment (start 24.2125 50) (end 24.2125 52) (width 0.3) (layer F.Cu) (net 20) (status 20))
(segment (start 24.2125 49.5) (end 24.2125 50) (width 0.3) (layer F.Cu) (net 20) (status 10))
(segment (start 58.9625 105) (end 58.9625 106.5) (width 0.3) (layer F.Cu) (net 21))
(segment (start 55.925 101.675) (end 54.5 101.675) (width 0.3) (layer F.Cu) (net 21))
(segment (start 58.7125 104.75) (end 58.25 104.75) (width 0.3) (layer F.Cu) (net 21))
(segment (start 57 102.75) (end 55.925 101.675) (width 0.3) (layer F.Cu) (net 21))
(segment (start 58.9625 105) (end 58.7125 104.75) (width 0.3) (layer F.Cu) (net 21))
(segment (start 58.25 104.75) (end 57 103.5) (width 0.3) (layer F.Cu) (net 21))
(segment (start 57 103.5) (end 57 102.75) (width 0.3) (layer F.Cu) (net 21))
(segment (start 58.9625 108) (end 58.9625 106.5) (width 0.3) (layer F.Cu) (net 21))
(segment (start 88.5 61.75) (end 91 64.25) (width 1) (layer F.Cu) (net 22) (status 20))
(segment (start 88.5 48.5) (end 88.5 61.75) (width 1) (layer F.Cu) (net 22))
(segment (start 80 45.5) (end 85.5 45.5) (width 1) (layer F.Cu) (net 22) (status 10))
(segment (start 85.5 45.5) (end 88.5 48.5) (width 1) (layer F.Cu) (net 22))
(segment (start 89.5 40.25) (end 91 41.75) (width 1) (layer F.Cu) (net 23) (status 20))
(segment (start 91 35) (end 89.5 36.5) (width 1) (layer F.Cu) (net 23) (status 10))
(segment (start 89.5 36.5) (end 89.5 40.25) (width 1) (layer F.Cu) (net 23))
(segment (start 80.5 25) (end 80 25.5) (width 1) (layer F.Cu) (net 24) (status 30))
(segment (start 91 25) (end 80.5 25) (width 1) (layer F.Cu) (net 24) (status 30))
(segment (start 35.5 107.5) (end 36.5 106.5) (width 0.3) (layer F.Cu) (net 25))
(segment (start 22.12 92.88) (end 19 96) (width 0.3) (layer F.Cu) (net 25))
(segment (start 23.96 92.88) (end 22.12 92.88) (width 0.3) (layer F.Cu) (net 25) (status 10))
(segment (start 19 96) (end 19 106.66) (width 0.3) (layer F.Cu) (net 25))
(segment (start 19.84 107.5) (end 35.5 107.5) (width 0.3) (layer F.Cu) (net 25))
(segment (start 37.75 96.5) (end 40.825 96.5) (width 0.3) (layer F.Cu) (net 25) (status 20))
(segment (start 36.5 97.75) (end 37.75 96.5) (width 0.3) (layer F.Cu) (net 25))
(segment (start 36.5 106.5) (end 36.5 97.75) (width 0.3) (layer F.Cu) (net 25))
(segment (start 19 106.66) (end 19.84 107.5) (width 0.3) (layer F.Cu) (net 25))
(segment (start 19.65 93.3) (end 21.85 93.3) (width 0.25) (layer B.Cu) (net 25) (status 30))
(segment (start 23.54 93.3) (end 23.96 92.88) (width 0.25) (layer B.Cu) (net 25) (status 30))
(segment (start 21.85 93.3) (end 23.54 93.3) (width 0.25) (layer B.Cu) (net 25) (status 30))
(segment (start 20 97.5) (end 22.08 95.42) (width 0.3) (layer F.Cu) (net 26))
(segment (start 22.08 95.42) (end 23.96 95.42) (width 0.3) (layer F.Cu) (net 26) (status 20))
(segment (start 20.89 106.5) (end 20 105.61) (width 0.3) (layer F.Cu) (net 26))
(segment (start 40.825 96) (end 37.25 96) (width 0.3) (layer F.Cu) (net 26) (status 10))
(segment (start 37.25 96) (end 35.5 97.75) (width 0.3) (layer F.Cu) (net 26))
(segment (start 35.5 97.75) (end 35.5 105.16) (width 0.3) (layer F.Cu) (net 26))
(segment (start 20 105.61) (end 20 97.5) (width 0.3) (layer F.Cu) (net 26))
(segment (start 35.5 105.16) (end 34.16 106.5) (width 0.3) (layer F.Cu) (net 26))
(segment (start 34.16 106.5) (end 20.89 106.5) (width 0.3) (layer F.Cu) (net 26))
(segment (start 19.65 95.2) (end 21.85 95.2) (width 0.25) (layer B.Cu) (net 26) (status 30))
(segment (start 23.74 95.2) (end 23.96 95.42) (width 0.25) (layer B.Cu) (net 26) (status 30))
(segment (start 21.85 95.2) (end 23.74 95.2) (width 0.25) (layer B.Cu) (net 26) (status 30))
(segment (start 36.75 95.5) (end 40.825 95.5) (width 0.3) (layer F.Cu) (net 27) (status 20))
(segment (start 35 97.25) (end 36.75 95.5) (width 0.3) (layer F.Cu) (net 27))
(segment (start 22.87 97.96) (end 21.5 99.33) (width 0.3) (layer F.Cu) (net 27))
(segment (start 35 103.99) (end 35 97.25) (width 0.3) (layer F.Cu) (net 27))
(segment (start 21.5 99.33) (end 21.5 105) (width 0.3) (layer F.Cu) (net 27))
(segment (start 22.07 105.57) (end 33.42 105.57) (width 0.3) (layer F.Cu) (net 27))
(segment (start 23.96 97.96) (end 22.87 97.96) (width 0.3) (layer F.Cu) (net 27) (status 10))
(segment (start 33.42 105.57) (end 35 103.99) (width 0.3) (layer F.Cu) (net 27))
(segment (start 21.5 105) (end 22.07 105.57) (width 0.3) (layer F.Cu) (net 27))
(segment (start 19.65 98.3) (end 21.85 98.3) (width 0.25) (layer B.Cu) (net 27) (status 30))
(segment (start 23.62 98.3) (end 23.96 97.96) (width 0.25) (layer B.Cu) (net 27) (status 30))
(segment (start 21.85 98.3) (end 23.62 98.3) (width 0.25) (layer B.Cu) (net 27) (status 30))
(segment (start 23.88 101.88) (end 23.88 100.58) (width 0.3) (layer F.Cu) (net 28) (status 20))
(segment (start 23.88 100.58) (end 23.96 100.5) (width 0.3) (layer F.Cu) (net 28) (status 30))
(segment (start 35.985 95) (end 34 96.985) (width 0.3) (layer F.Cu) (net 28))
(segment (start 40.825 95) (end 35.985 95) (width 0.3) (layer F.Cu) (net 28) (status 10))
(segment (start 26.5 104.5) (end 23.88 101.88) (width 0.3) (layer F.Cu) (net 28))
(segment (start 34 96.985) (end 34 103.5) (width 0.3) (layer F.Cu) (net 28))
(segment (start 34 103.5) (end 33 104.5) (width 0.3) (layer F.Cu) (net 28))
(segment (start 33 104.5) (end 26.5 104.5) (width 0.3) (layer F.Cu) (net 28))
(segment (start 19.65 100.2) (end 21.85 100.2) (width 0.25) (layer B.Cu) (net 28) (status 30))
(segment (start 23.66 100.2) (end 23.96 100.5) (width 0.25) (layer B.Cu) (net 28) (status 30))
(segment (start 21.85 100.2) (end 23.66 100.2) (width 0.25) (layer B.Cu) (net 28) (status 30))
(segment (start 38.725 78) (end 38.2875 78) (width 0.3) (layer F.Cu) (net 29) (status 20))
(segment (start 38.73 77.995) (end 38.725 78) (width 0.3) (layer F.Cu) (net 29))
(via (at 39.11 76.51) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 29))
(segment (start 38.73 76.52) (end 38.74 76.51) (width 0.3) (layer F.Cu) (net 29))
(segment (start 38.73 73.135) (end 38.73 76.52) (width 0.3) (layer F.Cu) (net 29) (status 10))
(segment (start 38.74 76.51) (end 39.11 76.51) (width 0.3) (layer F.Cu) (net 29))
(segment (start 38.73 76.52) (end 38.73 77.995) (width 0.3) (layer F.Cu) (net 29))
(via (at 40.5 76.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 29))
(segment (start 39.11 76.51) (end 40.49 76.51) (width 0.3) (layer B.Cu) (net 29))
(segment (start 44 86.325) (end 44 85) (width 0.3) (layer F.Cu) (net 29) (status 10))
(segment (start 40.49 76.51) (end 40.5 76.5) (width 0.3) (layer B.Cu) (net 29))
(segment (start 44.28751 84.71249) (end 44.28751 80.28751) (width 0.3) (layer F.Cu) (net 29))
(segment (start 44.28751 80.28751) (end 40.749999 76.749999) (width 0.3) (layer F.Cu) (net 29))
(segment (start 40.749999 76.749999) (end 40.5 76.5) (width 0.3) (layer F.Cu) (net 29))
(segment (start 44 85) (end 44.28751 84.71249) (width 0.3) (layer F.Cu) (net 29))
(segment (start 38.2875 80) (end 38.725 80) (width 0.3) (layer F.Cu) (net 30) (status 10))
(segment (start 38.725 80) (end 39.73 78.995) (width 0.3) (layer F.Cu) (net 30))
(via (at 39.73 78.995) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 30))
(segment (start 44.386447 88.54) (end 44.74 88.54) (width 0.3) (layer F.Cu) (net 30))
(segment (start 39.73 78.995) (end 45.609999 84.874999) (width 0.3) (layer B.Cu) (net 30))
(segment (start 45.609999 88.023554) (end 45.093553 88.54) (width 0.3) (layer B.Cu) (net 30))
(segment (start 45.609999 84.874999) (end 45.609999 88.023554) (width 0.3) (layer B.Cu) (net 30))
(segment (start 45.093553 88.54) (end 44.74 88.54) (width 0.3) (layer B.Cu) (net 30))
(segment (start 40.825 88) (end 42 88) (width 0.3) (layer F.Cu) (net 30) (status 10))
(segment (start 42.54 88.54) (end 44.386447 88.54) (width 0.3) (layer F.Cu) (net 30))
(segment (start 42 88) (end 42.54 88.54) (width 0.3) (layer F.Cu) (net 30))
(via (at 44.74 88.54) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 30))
(segment (start 40.25 74.155) (end 41.27 73.135) (width 0.3) (layer F.Cu) (net 30))
(segment (start 40.25 75.75) (end 40.25 74.155) (width 0.3) (layer F.Cu) (net 30))
(segment (start 39.73 78.995) (end 39.73 76.27) (width 0.3) (layer F.Cu) (net 30))
(segment (start 39.73 76.27) (end 40.25 75.75) (width 0.3) (layer F.Cu) (net 30))
(segment (start 46 68.35) (end 44.33 66.68) (width 0.3) (layer F.Cu) (net 31))
(segment (start 46 86.325) (end 46 68.35) (width 0.3) (layer F.Cu) (net 31) (status 10))
(segment (start 44.33 66.68) (end 41.8 66.68) (width 0.3) (layer F.Cu) (net 31))
(segment (start 39.88 70.475) (end 41.27 71.865) (width 0.3) (layer F.Cu) (net 31) (status 20))
(segment (start 39.88 68.6) (end 39.88 70.475) (width 0.3) (layer F.Cu) (net 31))
(segment (start 41.8 66.68) (end 39.88 68.6) (width 0.3) (layer F.Cu) (net 31))
(via (at 43.47 67.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 32))
(segment (start 45.5 86.325) (end 45.5 69.53) (width 0.3) (layer F.Cu) (net 32) (status 10))
(segment (start 45.5 69.53) (end 43.47 67.5) (width 0.3) (layer F.Cu) (net 32))
(via (at 39.73 66.56) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 32))
(segment (start 38.73 67.56) (end 39.73 66.56) (width 0.3) (layer F.Cu) (net 32))
(segment (start 38.73 71.865) (end 38.73 67.56) (width 0.3) (layer F.Cu) (net 32) (status 10))
(segment (start 40.67 67.5) (end 39.73 66.56) (width 0.25) (layer B.Cu) (net 32))
(segment (start 43.47 67.5) (end 40.67 67.5) (width 0.25) (layer B.Cu) (net 32))
(via (at 47.25 97.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 33))
(via (at 37.73 70.94) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 33))
(segment (start 38.5 70) (end 38.025 70) (width 0.3) (layer B.Cu) (net 33) (status 30))
(segment (start 37.46 71.21) (end 37.480001 71.189999) (width 0.3) (layer F.Cu) (net 33))
(segment (start 37.480001 71.189999) (end 37.73 70.94) (width 0.3) (layer F.Cu) (net 33))
(segment (start 37.73 70.586447) (end 37.73 70.94) (width 0.3) (layer B.Cu) (net 33))
(segment (start 37.46 71.865) (end 37.46 71.21) (width 0.3) (layer F.Cu) (net 33) (status 10))
(segment (start 38.025 70) (end 37.73 70.295) (width 0.3) (layer B.Cu) (net 33) (status 10))
(segment (start 37.73 70.295) (end 37.73 70.586447) (width 0.3) (layer B.Cu) (net 33))
(via (at 45.28 94.64) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 33))
(segment (start 45.28 95.28) (end 45.28 94.64) (width 0.3) (layer F.Cu) (net 33))
(segment (start 47.25 97.25) (end 45.28 95.28) (width 0.3) (layer F.Cu) (net 33))
(segment (start 45.28 94.286447) (end 45.28 94.64) (width 0.3) (layer B.Cu) (net 33))
(segment (start 45.28 92.56) (end 45.28 94.286447) (width 0.3) (layer B.Cu) (net 33))
(segment (start 37.73 70.94) (end 37.73 85.01) (width 0.3) (layer B.Cu) (net 33))
(segment (start 37.73 85.01) (end 45.28 92.56) (width 0.3) (layer B.Cu) (net 33))
(via (at 48.82 99.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 33))
(segment (start 49 101.675) (end 49 99.93) (width 0.3) (layer F.Cu) (net 33) (status 10))
(segment (start 48.82 98.82) (end 48.82 99.75) (width 0.3) (layer B.Cu) (net 33))
(segment (start 49 99.93) (end 48.82 99.75) (width 0.3) (layer F.Cu) (net 33))
(segment (start 47.25 97.25) (end 48.82 98.82) (width 0.3) (layer B.Cu) (net 33))
(segment (start 67 74.5) (end 66.5 74) (width 0.3) (layer F.Cu) (net 34) (status 30))
(segment (start 67 77.5) (end 67 74.5) (width 0.3) (layer F.Cu) (net 34) (status 30))
(segment (start 20.96 61.54) (end 47.2 61.54) (width 0.3) (layer B.Cu) (net 35) (status 10))
(segment (start 47.2 61.54) (end 49.55 59.19) (width 0.3) (layer B.Cu) (net 35))
(segment (start 55.61 59.19) (end 57.42 61) (width 0.3) (layer B.Cu) (net 35) (status 20))
(segment (start 49.55 59.19) (end 55.61 59.19) (width 0.3) (layer B.Cu) (net 35))
(segment (start 57.42 61) (end 57.42 55.0875) (width 0.3) (layer F.Cu) (net 35) (status 30))
(segment (start 57.42 55.0875) (end 57.37 55.0375) (width 0.3) (layer F.Cu) (net 35) (status 30))
(segment (start 57.12 66.38) (end 59.96 63.54) (width 0.3) (layer F.Cu) (net 36) (status 20))
(segment (start 57.12 76.21) (end 57.12 66.38) (width 0.3) (layer F.Cu) (net 36))
(segment (start 52.85 78.675) (end 54.655 78.675) (width 0.3) (layer F.Cu) (net 36) (status 10))
(segment (start 54.655 78.675) (end 57.12 76.21) (width 0.3) (layer F.Cu) (net 36))
(segment (start 56.11 64.85) (end 57.42 63.54) (width 0.3) (layer F.Cu) (net 37) (status 20))
(segment (start 56.11 75.2) (end 56.11 64.85) (width 0.3) (layer F.Cu) (net 37))
(segment (start 52.85 76.135) (end 55.175 76.135) (width 0.3) (layer F.Cu) (net 37) (status 10))
(segment (start 55.175 76.135) (end 56.11 75.2) (width 0.3) (layer F.Cu) (net 37))
(segment (start 54.88 61) (end 56.13 62.25) (width 0.3) (layer B.Cu) (net 38))
(segment (start 58.249999 67.769999) (end 58 67.52) (width 0.3) (layer F.Cu) (net 38))
(segment (start 59.505 76.135) (end 58.9 75.53) (width 0.3) (layer F.Cu) (net 38))
(segment (start 57.750001 67.270001) (end 58 67.52) (width 0.3) (layer B.Cu) (net 38))
(segment (start 58.9 75.53) (end 58.9 68.42) (width 0.3) (layer F.Cu) (net 38))
(segment (start 58.9 68.42) (end 58.249999 67.769999) (width 0.3) (layer F.Cu) (net 38))
(segment (start 56.13 65.65) (end 57.750001 67.270001) (width 0.3) (layer B.Cu) (net 38))
(segment (start 62.15 76.135) (end 59.505 76.135) (width 0.3) (layer F.Cu) (net 38))
(via (at 58 67.52) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 38))
(segment (start 56.13 62.25) (end 56.13 65.65) (width 0.3) (layer B.Cu) (net 38))
(segment (start 55.28 63.94) (end 54.88 63.54) (width 0.3) (layer F.Cu) (net 39) (status 30))
(segment (start 55.28 73.51) (end 55.28 63.94) (width 0.3) (layer F.Cu) (net 39) (status 20))
(segment (start 52.85 73.595) (end 55.195 73.595) (width 0.3) (layer F.Cu) (net 39) (status 10))
(segment (start 55.195 73.595) (end 55.28 73.51) (width 0.3) (layer F.Cu) (net 39))
(segment (start 58 69.853553) (end 58 69.5) (width 0.3) (layer F.Cu) (net 40))
(via (at 58 69.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 40))
(segment (start 53.56 62.22) (end 53.56 65.06) (width 0.3) (layer B.Cu) (net 40))
(segment (start 52.34 61) (end 53.56 62.22) (width 0.3) (layer B.Cu) (net 40))
(segment (start 57.750001 69.250001) (end 58 69.5) (width 0.3) (layer B.Cu) (net 40))
(segment (start 53.56 65.06) (end 57.750001 69.250001) (width 0.3) (layer B.Cu) (net 40))
(segment (start 62.15 78.675) (end 59.315 78.675) (width 0.3) (layer F.Cu) (net 40))
(segment (start 59.315 78.675) (end 58 77.36) (width 0.3) (layer F.Cu) (net 40))
(segment (start 58 77.36) (end 58 69.853553) (width 0.3) (layer F.Cu) (net 40))
(segment (start 54.405 71.055) (end 52.85 71.055) (width 0.3) (layer F.Cu) (net 41) (status 20))
(segment (start 54.53 70.93) (end 54.405 71.055) (width 0.3) (layer F.Cu) (net 41))
(segment (start 52.34 63.54) (end 52.34 65.63) (width 0.3) (layer F.Cu) (net 41) (status 10))
(segment (start 54.53 67.82) (end 54.53 70.93) (width 0.3) (layer F.Cu) (net 41))
(segment (start 52.34 65.63) (end 54.53 67.82) (width 0.3) (layer F.Cu) (net 41))
(via (at 58.5 91.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 42))
(segment (start 56.175 89.5) (end 57.75 89.5) (width 0.25) (layer F.Cu) (net 42) (status 10))
(segment (start 57.75 89.5) (end 58 89.75) (width 0.25) (layer F.Cu) (net 42))
(segment (start 58 90.75) (end 58.5 91.25) (width 0.25) (layer F.Cu) (net 42))
(segment (start 58 89.75) (end 58 90.75) (width 0.25) (layer F.Cu) (net 42))
(segment (start 60.98 93.73) (end 64.25 93.73) (width 0.3) (layer B.Cu) (net 42) (status 20))
(segment (start 58.5 91.25) (end 60.98 93.73) (width 0.3) (layer B.Cu) (net 42))
(segment (start 54.75 89.5) (end 56.175 89.5) (width 0.25) (layer F.Cu) (net 42) (status 20))
(segment (start 54.5 89.25) (end 54.75 89.5) (width 0.25) (layer F.Cu) (net 42))
(segment (start 56.175 89) (end 54.75 89) (width 0.25) (layer F.Cu) (net 42) (status 10))
(segment (start 54.75 89) (end 54.5 89.25) (width 0.25) (layer F.Cu) (net 42))
(segment (start 64.25 93.73) (end 64.3075 93.7875) (width 0.3) (layer B.Cu) (net 42) (status 30))
(segment (start 66.4425 93.73) (end 66.5 93.7875) (width 0.3) (layer B.Cu) (net 42))
(segment (start 64.25 93.73) (end 66.4425 93.73) (width 0.3) (layer B.Cu) (net 42))
(segment (start 84.7125 98) (end 84.7125 96) (width 0.3) (layer B.Cu) (net 43) (status 30))
(via (at 61.04 94.34) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 43))
(segment (start 58.533624 95.5) (end 59.313646 94.719978) (width 0.3) (layer F.Cu) (net 43))
(segment (start 60.790001 94.589999) (end 61.04 94.34) (width 0.3) (layer F.Cu) (net 43))
(segment (start 56.175 95.5) (end 58.533624 95.5) (width 0.3) (layer F.Cu) (net 43) (status 10))
(segment (start 60.660022 94.719978) (end 60.790001 94.589999) (width 0.3) (layer F.Cu) (net 43))
(segment (start 59.313646 94.719978) (end 60.660022 94.719978) (width 0.3) (layer F.Cu) (net 43))
(segment (start 61.393553 94.34) (end 61.04 94.34) (width 0.3) (layer B.Cu) (net 43))
(segment (start 61.575 94.34) (end 61.393553 94.34) (width 0.3) (layer B.Cu) (net 43))
(segment (start 63.5 96.265) (end 61.575 94.34) (width 0.3) (layer B.Cu) (net 43))
(segment (start 63.5 107.6833) (end 63.5 96.265) (width 0.3) (layer B.Cu) (net 43))
(segment (start 65.0667 109.25) (end 63.5 107.6833) (width 0.3) (layer B.Cu) (net 43))
(segment (start 84.7125 104.0507) (end 84.7169 104.0551) (width 0.3) (layer B.Cu) (net 43))
(segment (start 84.7125 98) (end 84.7125 104.0507) (width 0.3) (layer B.Cu) (net 43))
(segment (start 84.7169 104.0551) (end 84.7169 108.3897) (width 0.3) (layer B.Cu) (net 43))
(segment (start 84.7169 108.3897) (end 83.8566 109.25) (width 0.3) (layer B.Cu) (net 43))
(segment (start 83.8566 109.25) (end 65.0667 109.25) (width 0.3) (layer B.Cu) (net 43))
(via (at 27 86) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 44))
(via (at 27.5 56) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 44))
(segment (start 27.5 56) (end 25.7875 56) (width 0.3) (layer F.Cu) (net 44) (status 20))
(segment (start 21 80) (end 21 65.881996) (width 0.3) (layer B.Cu) (net 44))
(segment (start 21 65.881996) (end 19.37 64.251996) (width 0.3) (layer B.Cu) (net 44))
(segment (start 24.4 56) (end 27.5 56) (width 0.3) (layer B.Cu) (net 44))
(segment (start 27 86) (end 21 80) (width 0.3) (layer B.Cu) (net 44))
(segment (start 19.37 64.251996) (end 19.37 61.03) (width 0.3) (layer B.Cu) (net 44))
(segment (start 19.37 61.03) (end 24.4 56) (width 0.3) (layer B.Cu) (net 44))
(segment (start 29.75 88.75) (end 27 86) (width 0.3) (layer F.Cu) (net 44))
(segment (start 35.280001 94.5) (end 35 94.219999) (width 0.3) (layer F.Cu) (net 44))
(segment (start 40.825 94.5) (end 35.280001 94.5) (width 0.3) (layer F.Cu) (net 44) (status 10))
(segment (start 35 94.219999) (end 31.219999 94.219999) (width 0.3) (layer F.Cu) (net 44))
(segment (start 31.219999 94.219999) (end 29.75 92.75) (width 0.3) (layer F.Cu) (net 44))
(segment (start 29.75 92.75) (end 29.75 88.75) (width 0.3) (layer F.Cu) (net 44))
(via (at 47.88 63.54) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 45))
(via (at 27 52) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 45))
(segment (start 27 52) (end 25.7875 52) (width 0.3) (layer F.Cu) (net 45) (status 20))
(segment (start 56.103553 82.75) (end 55.75 82.75) (width 0.3) (layer F.Cu) (net 45))
(segment (start 60.86 91.27) (end 60.86 86.256447) (width 0.3) (layer F.Cu) (net 45))
(segment (start 60.86 86.256447) (end 57.353553 82.75) (width 0.3) (layer F.Cu) (net 45))
(segment (start 57.353553 82.75) (end 56.103553 82.75) (width 0.3) (layer F.Cu) (net 45))
(segment (start 47.88 74.88) (end 55.500001 82.500001) (width 0.3) (layer B.Cu) (net 45))
(segment (start 57.63 94.5) (end 60.86 91.27) (width 0.3) (layer F.Cu) (net 45))
(via (at 55.75 82.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 45))
(segment (start 56.175 94.5) (end 57.63 94.5) (width 0.3) (layer F.Cu) (net 45))
(segment (start 47.88 63.54) (end 47.88 74.88) (width 0.3) (layer B.Cu) (net 45))
(segment (start 55.500001 82.500001) (end 55.75 82.75) (width 0.3) (layer B.Cu) (net 45))
(segment (start 27 52) (end 46.5 52) (width 0.3) (layer B.Cu) (net 45))
(segment (start 46.5 52) (end 46.500026 52.000026) (width 0.3) (layer B.Cu) (net 45))
(segment (start 46.500026 62.160026) (end 46.500026 52.353579) (width 0.3) (layer F.Cu) (net 45))
(segment (start 47.88 63.54) (end 46.500026 62.160026) (width 0.3) (layer F.Cu) (net 45))
(via (at 46.500026 52.000026) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 45))
(segment (start 46.500026 52.353579) (end 46.500026 52.000026) (width 0.3) (layer F.Cu) (net 45))
(segment (start 56.175 95) (end 58.08 95) (width 0.3) (layer F.Cu) (net 46) (status 10))
(segment (start 58.08 95) (end 61.56 91.52) (width 0.3) (layer F.Cu) (net 46))
(segment (start 61.56 87.2275) (end 66 82.7875) (width 0.3) (layer F.Cu) (net 46) (status 20))
(segment (start 61.56 91.52) (end 61.56 87.2275) (width 0.3) (layer F.Cu) (net 46))
(segment (start 59.975 101.2375) (end 60.2125 101) (width 0.3) (layer F.Cu) (net 47) (status 30))
(segment (start 59.975 103) (end 59.975 101.2375) (width 0.3) (layer F.Cu) (net 47) (status 30))
(via (at 56.25 105) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 47))
(segment (start 54.81 105) (end 56.25 105) (width 0.3) (layer F.Cu) (net 47))
(segment (start 53 101.675) (end 53 103.19) (width 0.3) (layer F.Cu) (net 47) (status 10))
(segment (start 53 103.19) (end 54.81 105) (width 0.3) (layer F.Cu) (net 47))
(via (at 58 103.19) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 47))
(segment (start 58.19 103) (end 58 103.19) (width 0.3) (layer F.Cu) (net 47))
(segment (start 57.646447 103.19) (end 58 103.19) (width 0.3) (layer B.Cu) (net 47))
(segment (start 56.25 105) (end 58 103.25) (width 0.3) (layer B.Cu) (net 47))
(segment (start 56.3825 102.03) (end 56.3825 102.505) (width 0.3) (layer B.Cu) (net 47) (status 10))
(segment (start 57.0675 103.19) (end 57.646447 103.19) (width 0.3) (layer B.Cu) (net 47))
(segment (start 56.3825 102.505) (end 57.0675 103.19) (width 0.3) (layer B.Cu) (net 47))
(segment (start 58 103.25) (end 58 103.19) (width 0.3) (layer B.Cu) (net 47))
(segment (start 59.975 103) (end 58.19 103) (width 0.3) (layer F.Cu) (net 47) (status 10))
(segment (start 78.5 56.4375) (end 78.0625 56) (width 1) (layer F.Cu) (net 48) (status 30))
(segment (start 78.5 63.9) (end 78.5 56.4375) (width 1) (layer F.Cu) (net 48) (status 30))
(segment (start 77.725 63.125) (end 78.5 63.9) (width 1) (layer F.Cu) (net 48) (status 30))
(segment (start 73 63.125) (end 77.725 63.125) (width 1) (layer F.Cu) (net 48) (status 30))
(segment (start 53.25 50.75) (end 52.75 50.75) (width 0.6) (layer F.Cu) (net 48))
(segment (start 69.256386 63.125) (end 63.5 57.368614) (width 0.6) (layer F.Cu) (net 48))
(segment (start 73 63.125) (end 69.256386 63.125) (width 0.6) (layer F.Cu) (net 48))
(segment (start 63.5 55.75) (end 58.5 50.75) (width 0.6) (layer F.Cu) (net 48))
(segment (start 63.5 57.368614) (end 63.5 55.75) (width 0.6) (layer F.Cu) (net 48))
(segment (start 58.5 50.75) (end 53.25 50.75) (width 0.6) (layer F.Cu) (net 48))
(segment (start 46.5 86.325) (end 46.5 67.75) (width 0.3) (layer F.Cu) (net 49))
(segment (start 46.5 67.75) (end 44.25 65.5) (width 0.3) (layer F.Cu) (net 49))
(via (at 34.25 65.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 49))
(segment (start 44.25 65.5) (end 34.25 65.5) (width 0.3) (layer F.Cu) (net 49))
(via (at 32 65.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 49))
(segment (start 34.25 65.5) (end 32 65.5) (width 0.3) (layer B.Cu) (net 49))
(segment (start 29.25 67.5) (end 28 67.5) (width 0.3) (layer F.Cu) (net 49))
(segment (start 32 65.5) (end 31.25 65.5) (width 0.3) (layer F.Cu) (net 49))
(segment (start 31.25 65.5) (end 29.25 67.5) (width 0.3) (layer F.Cu) (net 49))
(segment (start 32 65.5) (end 32 66.7125) (width 0.3) (layer B.Cu) (net 49))
(segment (start 86 95.7125) (end 86.2875 96) (width 0.3) (layer B.Cu) (net 50) (status 30))
(segment (start 86 93.95) (end 86 95.7125) (width 0.3) (layer B.Cu) (net 50) (status 30))
(segment (start 86.2875 96) (end 86.2875 98) (width 0.3) (layer B.Cu) (net 50) (status 30))
(segment (start 60.5375 108) (end 62.7125 108) (width 0.3) (layer F.Cu) (net 52))
(segment (start 60.5375 109.5) (end 60.5375 108) (width 0.25) (layer F.Cu) (net 52))
(segment (start 30.25 26) (end 43 26) (width 1) (layer F.Cu) (net 53) (status 10))
(segment (start 45.5 28.5) (end 45.5 35.42) (width 1) (layer F.Cu) (net 53) (status 20))
(segment (start 43 26) (end 45.5 28.5) (width 1) (layer F.Cu) (net 53))
(segment (start 60 40.5) (end 50.58 40.5) (width 1) (layer F.Cu) (net 54) (status 30))
(segment (start 25.2375 54.5) (end 26.775 54.5) (width 0.3) (layer F.Cu) (net 55))
(segment (start 24.2125 55.525) (end 25.2375 54.5) (width 0.3) (layer F.Cu) (net 55) (status 10))
(segment (start 24.2125 56) (end 24.2125 55.525) (width 0.3) (layer F.Cu) (net 55) (status 30))
(segment (start 28.2125 54.5) (end 27 54.5) (width 0.3) (layer F.Cu) (net 55) (status 10))
(segment (start 26.775 54.5) (end 27 54.5) (width 0.3) (layer F.Cu) (net 55))
(segment (start 27 54.5) (end 27.2125 54.5) (width 0.3) (layer F.Cu) (net 55))
(segment (start 57.25 30.5) (end 52.75 26) (width 1) (layer F.Cu) (net 56) (status 20))
(segment (start 60 30.5) (end 57.25 30.5) (width 1) (layer F.Cu) (net 56) (status 10))
(segment (start 87.975 88.7875) (end 87.5 88.7875) (width 0.3) (layer B.Cu) (net 57) (status 20))
(segment (start 88 88.8125) (end 87.975 88.7875) (width 0.3) (layer B.Cu) (net 57))
(segment (start 88 93) (end 88 88.8125) (width 0.3) (layer B.Cu) (net 57) (status 10))
(segment (start 88 93) (end 91.5 93) (width 0.3) (layer B.Cu) (net 57) (status 30))
(segment (start 66 79.55) (end 66.05 79.5) (width 0.3) (layer F.Cu) (net 58) (status 30))
(segment (start 66 81.2125) (end 66 79.55) (width 0.3) (layer F.Cu) (net 58) (status 30))
(segment (start 46.0875 106.2875) (end 46.5 106.7) (width 0.3) (layer F.Cu) (net 63) (status 30))
(segment (start 44.5 106.2875) (end 46.0875 106.2875) (width 0.3) (layer F.Cu) (net 63) (status 30))
(via (at 48.14 106.72) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 63))
(segment (start 46.5 106.7) (end 48.12 106.7) (width 0.3) (layer F.Cu) (net 63) (status 10))
(segment (start 48.12 106.7) (end 48.14 106.72) (width 0.3) (layer F.Cu) (net 63))
(segment (start 47.7125 106.2925) (end 47.7125 105.5) (width 0.3) (layer B.Cu) (net 63) (status 20))
(segment (start 48.14 106.72) (end 47.7125 106.2925) (width 0.3) (layer B.Cu) (net 63))
(segment (start 48 106.58) (end 48.14 106.72) (width 0.3) (layer F.Cu) (net 63))
(segment (start 48 101.675) (end 48 106.58) (width 0.3) (layer F.Cu) (net 63) (status 10))
(segment (start 50.9125 104.7125) (end 50.5 104.3) (width 0.3) (layer F.Cu) (net 64) (status 30))
(segment (start 52.5 104.7125) (end 50.9125 104.7125) (width 0.3) (layer F.Cu) (net 64) (status 30))
(segment (start 49.05 104.26) (end 49.09 104.3) (width 0.3) (layer F.Cu) (net 64))
(segment (start 49.2875 104.4975) (end 49.2875 105.5) (width 0.3) (layer B.Cu) (net 64) (status 20))
(segment (start 49.09 104.3) (end 50.5 104.3) (width 0.3) (layer F.Cu) (net 64) (status 20))
(via (at 49.05 104.26) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 64))
(segment (start 49.05 104.26) (end 49.2875 104.4975) (width 0.3) (layer B.Cu) (net 64))
(segment (start 48.5 103.71) (end 49.05 104.26) (width 0.3) (layer F.Cu) (net 64))
(segment (start 48.5 101.675) (end 48.5 103.71) (width 0.3) (layer F.Cu) (net 64) (status 10))
(segment (start 58.2125 88.5) (end 56.175 88.5) (width 0.3) (layer F.Cu) (net 65) (status 30))
(segment (start 26.5 59) (end 23.5 59) (width 0.3) (layer B.Cu) (net 66) (status 20))
(segment (start 57.04 58.08) (end 48.78 58.08) (width 0.3) (layer B.Cu) (net 66))
(segment (start 46.629999 60.230001) (end 27.730001 60.230001) (width 0.3) (layer B.Cu) (net 66))
(segment (start 27.730001 60.230001) (end 26.5 59) (width 0.3) (layer B.Cu) (net 66))
(segment (start 48.78 58.08) (end 46.629999 60.230001) (width 0.3) (layer B.Cu) (net 66))
(segment (start 52.7775 81.2875) (end 52.85 81.215) (width 0.3) (layer F.Cu) (net 66) (status 30))
(segment (start 50 81.2875) (end 52.7775 81.2875) (width 0.3) (layer F.Cu) (net 66) (status 30))
(segment (start 57.04 58.08) (end 59.96 61) (width 0.3) (layer B.Cu) (net 66) (status 20))
(via (at 54.9 80.28) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 66))
(segment (start 52.85 81.215) (end 53.965 81.215) (width 0.4) (layer F.Cu) (net 66) (status 10))
(segment (start 53.965 81.215) (end 54.9 80.28) (width 0.4) (layer F.Cu) (net 66))
(segment (start 59.96 59.797919) (end 59.96 61) (width 0.6) (layer F.Cu) (net 66))
(segment (start 59.96 54.561018) (end 59.96 59.797919) (width 0.6) (layer F.Cu) (net 66))
(segment (start 52.00001 52.00001) (end 57.398992 52.00001) (width 0.6) (layer F.Cu) (net 66))
(segment (start 50.75 50.75) (end 52.00001 52.00001) (width 0.6) (layer F.Cu) (net 66))
(segment (start 57.398992 52.00001) (end 59.96 54.561018) (width 0.6) (layer F.Cu) (net 66))
(segment (start 59.96 61) (end 61.299999 62.339999) (width 0.3) (layer B.Cu) (net 66))
(segment (start 61.25 70.249974) (end 61.25 65) (width 0.4) (layer B.Cu) (net 66))
(segment (start 54.9 80.28) (end 54.9 76.599974) (width 0.4) (layer B.Cu) (net 66))
(segment (start 54.9 76.599974) (end 61.25 70.249974) (width 0.4) (layer B.Cu) (net 66))
(segment (start 61.299999 64.950001) (end 61.25 65) (width 0.3) (layer B.Cu) (net 66))
(segment (start 61.299999 62.339999) (end 61.299999 64.950001) (width 0.3) (layer B.Cu) (net 66))
(segment (start 43.5 86.325) (end 43.5 83.5) (width 0.3) (layer F.Cu) (net 67) (status 30))
(via (at 53.83 91.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 68))
(via (at 52.94 95.44) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 68))
(segment (start 53 97.7125) (end 53 95.5) (width 0.3) (layer B.Cu) (net 68) (status 10))
(segment (start 53 95.5) (end 52.94 95.44) (width 0.3) (layer B.Cu) (net 68))
(segment (start 53.83 94.55) (end 52.94 95.44) (width 0.3) (layer F.Cu) (net 68))
(segment (start 53.83 91.25) (end 53.83 94.55) (width 0.3) (layer F.Cu) (net 68))
(segment (start 53.83 91.25) (end 53.83 91.17) (width 0.4) (layer B.Cu) (net 68))
(segment (start 53.83 91.17) (end 65.25 79.75) (width 0.4) (layer B.Cu) (net 68))
(via (at 59.8 79.97) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 80))
(segment (start 59.825 79.945) (end 59.8 79.97) (width 0.3) (layer F.Cu) (net 80))
(segment (start 62.15 79.945) (end 59.825 79.945) (width 0.3) (layer F.Cu) (net 80) (status 10))
(segment (start 49.89 88.14) (end 49.89 89.04) (width 0.3) (layer F.Cu) (net 80))
(segment (start 45.43 93.5) (end 40.825 93.5) (width 0.3) (layer F.Cu) (net 80) (status 20))
(via (at 49.89 88.14) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 80))
(segment (start 49.89 89.04) (end 45.43 93.5) (width 0.3) (layer F.Cu) (net 80))
(segment (start 59.8 80.56) (end 59.8 79.97) (width 0.3) (layer B.Cu) (net 80))
(segment (start 56.36 84) (end 59.8 80.56) (width 0.3) (layer B.Cu) (net 80))
(segment (start 54.93 84) (end 56.36 84) (width 0.3) (layer B.Cu) (net 80))
(segment (start 49.89 88.14) (end 50.79 88.14) (width 0.3) (layer B.Cu) (net 80))
(segment (start 50.79 88.14) (end 54.93 84) (width 0.3) (layer B.Cu) (net 80))
(via (at 50 90) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 81))
(segment (start 46 94) (end 50 90) (width 0.3) (layer F.Cu) (net 81))
(segment (start 40.825 94) (end 46 94) (width 0.3) (layer F.Cu) (net 81) (status 10))
(via (at 64.25 77.500016) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 81))
(segment (start 64.154984 77.405) (end 64.25 77.500016) (width 0.3) (layer F.Cu) (net 81))
(segment (start 62.15 77.405) (end 64.154984 77.405) (width 0.3) (layer F.Cu) (net 81) (status 10))
(segment (start 64.25 78) (end 64.25 77.500016) (width 0.3) (layer B.Cu) (net 81))
(segment (start 64.25 78.25) (end 64.25 78) (width 0.3) (layer B.Cu) (net 81))
(segment (start 50 90) (end 52.5 90) (width 0.3) (layer B.Cu) (net 81))
(segment (start 52.5 90) (end 64.25 78.25) (width 0.3) (layer B.Cu) (net 81))
(segment (start 62.15 74.865) (end 64.005 74.865) (width 0.3) (layer F.Cu) (net 82) (status 10))
(via (at 64.05 74.82) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 82))
(segment (start 64.005 74.865) (end 64.05 74.82) (width 0.3) (layer F.Cu) (net 82))
(segment (start 52.5 84.76) (end 52.5 86.325) (width 0.3) (layer F.Cu) (net 82) (status 20))
(segment (start 57.37 81.2) (end 56.06 81.2) (width 0.3) (layer F.Cu) (net 82))
(segment (start 56.06 81.2) (end 52.5 84.76) (width 0.3) (layer F.Cu) (net 82))
(via (at 57.37 81.2) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 82))
(segment (start 64.01 74.78) (end 64.05 74.82) (width 0.3) (layer B.Cu) (net 82))
(segment (start 61.94 74.78) (end 64.01 74.78) (width 0.3) (layer B.Cu) (net 82))
(segment (start 57.65 79.07) (end 61.94 74.78) (width 0.3) (layer B.Cu) (net 82))
(segment (start 57.37 81.2) (end 57.65 80.92) (width 0.3) (layer B.Cu) (net 82))
(segment (start 57.65 80.92) (end 57.65 79.07) (width 0.3) (layer B.Cu) (net 82))
(via (at 60.34 72.4) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 84))
(segment (start 60.415 72.325) (end 62.15 72.325) (width 0.3) (layer F.Cu) (net 84) (status 20))
(segment (start 60.34 72.4) (end 60.415 72.325) (width 0.3) (layer F.Cu) (net 84))
(segment (start 56.5 76.24) (end 56.5 79.646447) (width 0.3) (layer B.Cu) (net 84))
(segment (start 52 86.325) (end 52 84.5) (width 0.3) (layer F.Cu) (net 84))
(segment (start 56.5 79.646447) (end 56.5 80) (width 0.3) (layer B.Cu) (net 84))
(segment (start 52 84.5) (end 56.250001 80.249999) (width 0.3) (layer F.Cu) (net 84))
(segment (start 60.34 72.4) (end 56.5 76.24) (width 0.3) (layer B.Cu) (net 84))
(via (at 56.5 80) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 84))
(segment (start 56.250001 80.249999) (end 56.5 80) (width 0.3) (layer F.Cu) (net 84))
(segment (start 48.25 75.83) (end 49.215 74.865) (width 0.3) (layer F.Cu) (net 86))
(segment (start 49.215 74.865) (end 52.85 74.865) (width 0.3) (layer F.Cu) (net 86) (status 20))
(segment (start 48.25 82.15) (end 48.25 75.83) (width 0.3) (layer F.Cu) (net 86))
(segment (start 51 86.325) (end 51 84.9) (width 0.3) (layer F.Cu) (net 86) (status 10))
(segment (start 51 84.9) (end 48.25 82.15) (width 0.3) (layer F.Cu) (net 86))
(segment (start 52.85 77.405) (end 49.595 77.405) (width 0.3) (layer F.Cu) (net 87) (status 10))
(segment (start 49.595 77.405) (end 48.77 78.23) (width 0.3) (layer F.Cu) (net 87))
(segment (start 48.77 78.23) (end 48.77 81.75) (width 0.3) (layer F.Cu) (net 87))
(segment (start 51.5 84.48) (end 51.5 86.325) (width 0.3) (layer F.Cu) (net 87) (status 20))
(segment (start 48.77 81.75) (end 51.5 84.48) (width 0.3) (layer F.Cu) (net 87))
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(zone (net 2) (net_name GND) (layer F.Cu) (tstamp 5E1002D7) (hatch edge 0.508)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(connect_pads (clearance 0.25))
(min_thickness 0.254)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fill (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(polygon
(pts
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 64 52) (xy 82 52) (xy 82 72.5) (xy 97.5 72.5) (xy 98 110.5)
(xy 67 110.5) (xy 64.5 110.5) (xy 18 110.5) (xy 18 18) (xy 64 18)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
)
)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(zone (net 1) (net_name Earth) (layer B.Cu) (tstamp 5E1002D4) (hatch edge 0.508)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(connect_pads (clearance 0.25))
(min_thickness 0.254)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fill (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(polygon
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(pts
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 98 15) (xy 18 15) (xy 18 13) (xy 98 13)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
)
)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(zone (net 1) (net_name Earth) (layer F.Cu) (tstamp 5E1002D1) (hatch edge 0.508)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(connect_pads (clearance 0.25))
(min_thickness 0.254)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fill (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(polygon
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(pts
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 98 15) (xy 18 15) (xy 18 13) (xy 98 13)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
)
)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(zone (net 1) (net_name Earth) (layer B.Cu) (tstamp 5E1002CE) (hatch edge 0.508)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(connect_pads (clearance 0.25))
(min_thickness 0.254)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fill (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(polygon
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(pts
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 98 113) (xy 18 113) (xy 18 111) (xy 98 111)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
)
)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(zone (net 1) (net_name Earth) (layer F.Cu) (tstamp 5E1002CB) (hatch edge 0.508)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(connect_pads (clearance 0.25))
(min_thickness 0.254)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fill (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(polygon
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(pts
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 98 113) (xy 18 113) (xy 18 111) (xy 98 111)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
)
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(zone (net 2) (net_name GND) (layer B.Cu) (tstamp 5E1002C8) (hatch edge 0.508)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(priority 4)
(connect_pads (clearance 0.25))
(min_thickness 0.254)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fill (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(polygon
(pts
(xy 50 104.5) (xy 52 106.5) (xy 53.5 106.5) (xy 53.5 108.5) (xy 46.5 108.5)
(xy 46.5 103) (xy 50 103)
)
)
)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(zone (net 0) (net_name "") (layer B.Cu) (tstamp 5E1002C5) (hatch edge 0.508)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(priority 3)
(connect_pads (clearance 0.25))
(min_thickness 0.254)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fill (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(polygon
(pts
(xy 50 104.5) (xy 52 106.5) (xy 53.5 106.5) (xy 53.5 108.5) (xy 46.5 108.5)
(xy 46.5 103) (xy 50 103)
)
)
)
(zone (net 0) (net_name "") (layer F.Cu) (tstamp 0) (hatch edge 0.508)
(connect_pads (clearance 0.25))
(min_thickness 0.254)
(keepout (tracks allowed) (vias allowed) (copperpour not_allowed))
(fill (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
(polygon
(pts
(xy 43 108) (xy 42.5 108) (xy 42.5 103.5) (xy 43 103.5)
)
)
)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(zone (net 3) (net_name +8V) (layer B.Cu) (tstamp 5E1002C2) (hatch edge 0.508)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(priority 1)
(connect_pads (clearance 0.25))
(min_thickness 0.254)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fill (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(polygon
(pts
(xy 81.5 71.5) (xy 79 71.5) (xy 79 68.5) (xy 81.5 68.5)
)
)
)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(zone (net 4) (net_name +3V3) (layer B.Cu) (tstamp 5E1002BF) (hatch edge 0.508)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(priority 1)
(connect_pads (clearance 0.25))
(min_thickness 0.254)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fill (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(polygon
(pts
(xy 51.5 93) (xy 50 93) (xy 50 94.5) (xy 49 95.5) (xy 46 92.5)
(xy 47.25 91.25) (xy 51.5 91.25)
)
)
)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(zone (net 3) (net_name +8V) (layer F.Cu) (tstamp 5E1002BC) (hatch edge 0.508)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(priority 1)
(connect_pads (clearance 0.25))
(min_thickness 0.254)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fill (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(polygon
(pts
(xy 47.5 42.5) (xy 34.25 42.5) (xy 34.25 47.25) (xy 31 47.25) (xy 31 42.5)
(xy 22 42.5) (xy 22 38.25) (xy 47.5 38.25)
)
)
)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(zone (net 4) (net_name +3V3) (layer F.Cu) (tstamp 5E1002B9) (hatch edge 0.508)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(priority 1)
(connect_pads yes (clearance 0.25))
(min_thickness 0.254)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fill (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(polygon
(pts
(xy 40.5 84.75) (xy 39 84.75) (xy 39 82.75) (xy 37.5 82.75) (xy 37.5 81.5)
(xy 40.5 81.5)
)
)
)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(zone (net 2) (net_name GND) (layer B.Cu) (tstamp 5E1002B6) (hatch edge 0.508)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(connect_pads (clearance 0.25))
(min_thickness 0.254)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fill (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(polygon
(pts
(xy 67 52) (xy 83 52) (xy 83 72) (xy 98 72) (xy 98 110.5)
(xy 17 110.5) (xy 17 18) (xy 67 18)
)
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
)
(zone (net 0) (net_name "") (layer F.Cu) (tstamp 0) (hatch edge 0.508)
(connect_pads (clearance 0.25))
(min_thickness 0.254)
(keepout (tracks allowed) (vias allowed) (copperpour not_allowed))
(fill (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
(polygon
Schematic beautify and layout improvments, Length matching for SDIO
2019-12-25 19:15:32 +01:00
(pts
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(xy 54.25 109) (xy 42.5 109) (xy 42.5 108) (xy 43 108) (xy 43 108.5)
(xy 53.75 108.5) (xy 53.75 104.75) (xy 54.25 104.75)
Schematic beautify and layout improvments, Length matching for SDIO
2019-12-25 19:15:32 +01:00
)
)
)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
)