pcb/reflow-oven-control-pcb
1
0
Fork 0
Code Issues Pull Requests Releases 5 Wiki Activity
3398986f53
reflow-oven-control-pcb/reflow-oven-control-pcb.kicad_pcb

11604 lines
913 KiB
Plaintext
Raw Normal View History

Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(kicad_pcb (version 20171130) (host pcbnew 5.1.6)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(general
(thickness 1.6)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(drawings 94)
(tracks 1890)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(zones 0)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(modules 129)
(nets 137)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
)
(page A4)
(layers
(0 F.Cu signal)
(31 B.Cu signal)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
(32 B.Adhes user)
(33 F.Adhes user)
(34 B.Paste user)
(35 F.Paste user)
(36 B.SilkS user)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(37 F.SilkS user)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
(38 B.Mask user)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(39 F.Mask user)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
(40 Dwgs.User user)
(41 Cmts.User user)
(42 Eco1.User user)
(43 Eco2.User user)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(44 Edge.Cuts user)
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
(45 Margin user)
(46 B.CrtYd user)
(47 F.CrtYd user)
remove selectable voltage level for level shifter on LCB bus. This does not work
2020-02-18 20:12:22 +01:00
(48 B.Fab user)
(49 F.Fab user)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
)
(setup
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(last_trace_width 0.25)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(user_trace_width 0.3)
(user_trace_width 0.4)
(user_trace_width 0.6)
(user_trace_width 1)
(user_trace_width 2)
(trace_clearance 0.2)
(zone_clearance 0.25)
(zone_45_only no)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(trace_min 0.21)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(via_size 0.5)
(via_drill 0.3)
(via_min_size 0.4)
(via_min_drill 0.3)
(user_via 0.9 0.5)
(uvia_size 0.3)
(uvia_drill 0.1)
(uvias_allowed no)
(uvia_min_size 0.2)
(uvia_min_drill 0.1)
(edge_width 0.05)
(segment_width 0.2)
(pcb_text_width 0.3)
(pcb_text_size 1.5 1.5)
(mod_edge_width 0.12)
(mod_text_size 1 1)
(mod_text_width 0.15)
add GND points near test points to get good ground connection
2020-02-18 20:37:26 +01:00
(pad_size 1.5 1.5)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(pad_drill 0)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(pad_to_mask_clearance 0.051)
(solder_mask_min_width 0.25)
(aux_axis_origin 13 13)
(visible_elements FFFFFF7F)
(pcbplotparams
(layerselection 0x010fc_ffffffff)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(usegerberextensions true)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(usegerberattributes false)
(usegerberadvancedattributes false)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(creategerberjobfile true)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(excludeedgelayer true)
(linewidth 0.100000)
(plotframeref false)
Export gerbers with tented vias
2020-02-18 20:40:21 +01:00
(viasonmask false)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(mode 1)
(useauxorigin false)
(hpglpennumber 1)
(hpglpenspeed 20)
(hpglpendiameter 15.000000)
(psnegative false)
(psa4output false)
(plotreference true)
(plotvalue true)
(plotinvisibletext false)
(padsonsilk false)
(subtractmaskfromsilk false)
(outputformat 1)
(mirror false)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(drillshape 0)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(scaleselection 1)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(outputdirectory "gerber/"))
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
)
(net 0 "")
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(net 1 Earth)
(net 2 GND)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3)
(net 4 +5V)
(net 5 /Controller/ENC1)
(net 6 /Controller/ENC2)
(net 7 /Controller/VREF)
(net 8 /Controller/SW1)
(net 9 /Frontend/FORCE+)
(net 10 /Frontend/FORCE-)
(net 11 /Frontend/SENS+)
(net 12 /Frontend/SENS-)
(net 13 /Controller/SDIO_D1)
(net 14 /Controller/SDIO_D0)
(net 15 /Controller/SDIO_CLK)
(net 16 /Controller/SDIO_CMD)
(net 17 /Controller/SDIO_D3)
(net 18 /Controller/SDIO_D2)
(net 19 "Net-(D102-Pad1)")
(net 20 /Controller/TEMP_IN)
(net 21 /L_Trafo)
(net 22 /L_IN)
(net 23 /N_IN)
(net 24 /DIGIO3)
(net 25 /DIGIO2)
(net 26 /DIGIO1)
(net 27 /DIGIO0)
(net 28 /Controller/SWDIO)
(net 29 /Controller/SWCLK)
(net 30 /Controller/PC_RX)
(net 31 /Controller/PC_TX)
(net 32 /Controller/~RST)
(net 33 "Net-(LS101-Pad1)")
(net 34 /Controller/LCD_VO)
(net 35 /Controller/LCD_RS)
(net 36 /Controller/LCD_EN)
(net 37 /Controller/LCD_D3)
(net 38 /Controller/LCD_D0)
(net 39 /Controller/LCD_D2)
(net 40 /Controller/LCD_D1)
(net 41 /OUT0)
(net 42 /OUT3)
(net 43 /OUT2)
(net 44 /OUT1)
(net 45 /Controller/VDDA)
(net 46 +5VL)
(net 47 /Controller/CARD_DETECT)
(net 48 "Net-(C102-Pad2)")
(net 49 "Net-(C306-Pad1)")
(net 50 "Net-(D103-Pad1)")
(net 51 "Net-(J103-Pad1)")
(net 52 "Net-(Q101-Pad1)")
(net 53 +3.3VA)
(net 54 /Controller/NSS)
(net 55 /Controller/SCK)
(net 56 /Controller/MISO)
(net 57 "Net-(C206-Pad1)")
(net 58 "Net-(C207-Pad1)")
(net 59 "Net-(C211-Pad1)")
(net 60 "Net-(C213-Pad1)")
(net 61 "Net-(C304-Pad1)")
(net 62 "Net-(J202-Pad5)")
(net 63 "Net-(J202-Pad6)")
(net 64 "Net-(J202-Pad8)")
(net 65 "Net-(R311-Pad1)")
(net 66 "Net-(R314-Pad2)")
(net 67 "Net-(U201-Pad2)")
(net 68 "Net-(U201-Pad4)")
(net 69 "Net-(U201-Pad6)")
(net 70 "Net-(U201-Pad7)")
(net 71 "Net-(U201-Pad8)")
(net 72 "Net-(U201-Pad9)")
(net 73 "Net-(U201-Pad15)")
(net 74 "Net-(U201-Pad17)")
(net 75 "Net-(U202-Pad2)")
(net 76 "Net-(U202-Pad3)")
(net 77 "Net-(U202-Pad4)")
(net 78 "Net-(U202-Pad5)")
(net 79 "Net-(U202-Pad7)")
(net 80 "Net-(U202-Pad8)")
(net 81 "Net-(U202-Pad9)")
(net 82 "Net-(U202-Pad15)")
(net 83 "Net-(U202-Pad16)")
(net 84 "Net-(U202-Pad17)")
(net 85 "Net-(U202-Pad18)")
(net 86 "Net-(U202-Pad26)")
(net 87 "Net-(U202-Pad29)")
(net 88 "Net-(U202-Pad32)")
(net 89 "Net-(U202-Pad33)")
(net 90 "Net-(U202-Pad34)")
(net 91 "Net-(U202-Pad38)")
(net 92 "Net-(U202-Pad39)")
(net 93 "Net-(U202-Pad40)")
(net 94 "Net-(U202-Pad41)")
(net 95 "Net-(U202-Pad42)")
(net 96 "Net-(U202-Pad43)")
(net 97 "Net-(U202-Pad44)")
(net 98 "Net-(U202-Pad45)")
(net 99 "Net-(U202-Pad46)")
(net 100 "Net-(U202-Pad59)")
(net 101 "Net-(U202-Pad60)")
(net 102 "Net-(U202-Pad61)")
(net 103 "Net-(U202-Pad62)")
(net 104 "Net-(U202-Pad63)")
(net 105 "Net-(U202-Pad64)")
(net 106 "Net-(U202-Pad70)")
(net 107 "Net-(U202-Pad71)")
(net 108 "Net-(U202-Pad77)")
(net 109 "Net-(U202-Pad81)")
(net 110 "Net-(U202-Pad82)")
(net 111 "Net-(U202-Pad84)")
(net 112 "Net-(U202-Pad86)")
(net 113 "Net-(U202-Pad95)")
(net 114 "Net-(U202-Pad96)")
(net 115 "Net-(U202-Pad97)")
(net 116 "Net-(U202-Pad98)")
(net 117 /Frontend/VREF_OP)
(net 118 /DIGIO0_PROT)
(net 119 /DIGIO1_PROT)
(net 120 /DIGIO2_PROT)
(net 121 /DIGIO3_PROT)
(net 122 "Net-(C302-Pad2)")
(net 123 "Net-(C302-Pad1)")
(net 124 "Net-(C303-Pad2)")
(net 125 "Net-(C303-Pad1)")
(net 126 "Net-(C306-Pad2)")
(net 127 "Net-(C309-Pad1)")
(net 128 "Net-(R314-Pad1)")
(net 129 /Controller/~CS~_EEPROM)
(net 130 /Controller/SPI2_SCK)
(net 131 /Controller/SPI2_MISO)
(net 132 /Controller/SPI2_MOSI)
(net 133 "Net-(C104-Pad2)")
(net 134 "Net-(C115-Pad1)")
(net 135 "Net-(U202-Pad47)")
(net 136 "Net-(U202-Pad48)")
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(net_class Default "This is the default net class."
(clearance 0.2)
(trace_width 0.25)
(via_dia 0.5)
(via_drill 0.3)
(uvia_dia 0.3)
(uvia_drill 0.1)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(diff_pair_width 0.21)
(diff_pair_gap 0.25)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(add_net +3.3VA)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net +3V3)
(add_net +5V)
Improved layout, Add QR code, Add external ADC option for 22 bit ADC
2019-12-26 18:01:55 +01:00
(add_net +5VL)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(add_net /Controller/CARD_DETECT)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net /Controller/ENC1)
(add_net /Controller/ENC2)
(add_net /Controller/LCD_D0)
(add_net /Controller/LCD_D1)
(add_net /Controller/LCD_D2)
(add_net /Controller/LCD_D3)
(add_net /Controller/LCD_EN)
(add_net /Controller/LCD_RS)
(add_net /Controller/LCD_VO)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(add_net /Controller/MISO)
(add_net /Controller/NSS)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net /Controller/PC_RX)
(add_net /Controller/PC_TX)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(add_net /Controller/SCK)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net /Controller/SDIO_CLK)
(add_net /Controller/SDIO_CMD)
(add_net /Controller/SDIO_D0)
(add_net /Controller/SDIO_D1)
(add_net /Controller/SDIO_D2)
(add_net /Controller/SDIO_D3)
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(add_net /Controller/SPI2_MISO)
(add_net /Controller/SPI2_MOSI)
(add_net /Controller/SPI2_SCK)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net /Controller/SW1)
(add_net /Controller/SWCLK)
(add_net /Controller/SWDIO)
(add_net /Controller/TEMP_IN)
Schematic beautify and layout improvments, Length matching for SDIO
2019-12-25 19:15:32 +01:00
(add_net /Controller/VDDA)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net /Controller/VREF)
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(add_net /Controller/~CS~_EEPROM)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net /Controller/~RST)
(add_net /DIGIO0)
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(add_net /DIGIO0_PROT)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net /DIGIO1)
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(add_net /DIGIO1_PROT)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net /DIGIO2)
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(add_net /DIGIO2_PROT)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net /DIGIO3)
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(add_net /DIGIO3_PROT)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net /Frontend/FORCE+)
(add_net /Frontend/FORCE-)
(add_net /Frontend/SENS+)
(add_net /Frontend/SENS-)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(add_net /Frontend/VREF_OP)
Schematic beautify and layout improvments, Length matching for SDIO
2019-12-25 19:15:32 +01:00
(add_net /OUT0)
(add_net /OUT1)
(add_net /OUT2)
(add_net /OUT3)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net Earth)
(add_net GND)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(add_net "Net-(C102-Pad2)")
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(add_net "Net-(C104-Pad2)")
(add_net "Net-(C115-Pad1)")
Re-annotate components
2020-02-05 18:58:36 +01:00
(add_net "Net-(C206-Pad1)")
(add_net "Net-(C207-Pad1)")
(add_net "Net-(C211-Pad1)")
(add_net "Net-(C213-Pad1)")
Re-enumerate components. This finilizes draft version for V1.2
2020-02-18 20:19:59 +01:00
(add_net "Net-(C302-Pad1)")
(add_net "Net-(C302-Pad2)")
(add_net "Net-(C303-Pad1)")
(add_net "Net-(C303-Pad2)")
Re-annotate components
2020-02-05 18:58:36 +01:00
(add_net "Net-(C304-Pad1)")
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(add_net "Net-(C306-Pad1)")
Re-enumerate components. This finilizes draft version for V1.2
2020-02-18 20:19:59 +01:00
(add_net "Net-(C306-Pad2)")
(add_net "Net-(C309-Pad1)")
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net "Net-(D102-Pad1)")
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(add_net "Net-(D103-Pad1)")
(add_net "Net-(J103-Pad1)")
Re-annotate components
2020-02-05 18:58:36 +01:00
(add_net "Net-(J202-Pad5)")
(add_net "Net-(J202-Pad6)")
(add_net "Net-(J202-Pad8)")
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(add_net "Net-(LS101-Pad1)")
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(add_net "Net-(Q101-Pad1)")
Re-annotate components
2020-02-05 18:58:36 +01:00
(add_net "Net-(R311-Pad1)")
Re-enumerate components. This finilizes draft version for V1.2
2020-02-18 20:19:59 +01:00
(add_net "Net-(R314-Pad1)")
Re-annotate components
2020-02-05 18:58:36 +01:00
(add_net "Net-(R314-Pad2)")
(add_net "Net-(U201-Pad15)")
(add_net "Net-(U201-Pad17)")
(add_net "Net-(U201-Pad2)")
(add_net "Net-(U201-Pad4)")
(add_net "Net-(U201-Pad6)")
(add_net "Net-(U201-Pad7)")
(add_net "Net-(U201-Pad8)")
(add_net "Net-(U201-Pad9)")
(add_net "Net-(U202-Pad15)")
(add_net "Net-(U202-Pad16)")
(add_net "Net-(U202-Pad17)")
(add_net "Net-(U202-Pad18)")
(add_net "Net-(U202-Pad2)")
(add_net "Net-(U202-Pad26)")
(add_net "Net-(U202-Pad29)")
(add_net "Net-(U202-Pad3)")
(add_net "Net-(U202-Pad32)")
(add_net "Net-(U202-Pad33)")
(add_net "Net-(U202-Pad34)")
(add_net "Net-(U202-Pad38)")
(add_net "Net-(U202-Pad39)")
(add_net "Net-(U202-Pad4)")
(add_net "Net-(U202-Pad40)")
(add_net "Net-(U202-Pad41)")
(add_net "Net-(U202-Pad42)")
(add_net "Net-(U202-Pad43)")
(add_net "Net-(U202-Pad44)")
(add_net "Net-(U202-Pad45)")
(add_net "Net-(U202-Pad46)")
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(add_net "Net-(U202-Pad47)")
(add_net "Net-(U202-Pad48)")
Re-annotate components
2020-02-05 18:58:36 +01:00
(add_net "Net-(U202-Pad5)")
(add_net "Net-(U202-Pad59)")
(add_net "Net-(U202-Pad60)")
(add_net "Net-(U202-Pad61)")
(add_net "Net-(U202-Pad62)")
(add_net "Net-(U202-Pad63)")
(add_net "Net-(U202-Pad64)")
(add_net "Net-(U202-Pad7)")
(add_net "Net-(U202-Pad70)")
(add_net "Net-(U202-Pad71)")
(add_net "Net-(U202-Pad77)")
(add_net "Net-(U202-Pad8)")
(add_net "Net-(U202-Pad81)")
(add_net "Net-(U202-Pad82)")
(add_net "Net-(U202-Pad84)")
(add_net "Net-(U202-Pad86)")
(add_net "Net-(U202-Pad9)")
(add_net "Net-(U202-Pad95)")
(add_net "Net-(U202-Pad96)")
(add_net "Net-(U202-Pad97)")
(add_net "Net-(U202-Pad98)")
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
)
(net_class HV ""
Finalize version v1.0
2020-01-03 21:26:29 +01:00
(clearance 2.55)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
(trace_width 1)
(via_dia 0.5)
(via_drill 0.3)
(uvia_dia 0.3)
(uvia_drill 0.1)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(diff_pair_width 0.21)
(diff_pair_gap 0.25)
(add_net /L_IN)
(add_net /L_Trafo)
(add_net /N_IN)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(module Converter_ACDC:Converter_ACDC_MeanWell_IRM-05-xx_THT (layer F.Cu) (tedit 5AEF7D42) (tstamp 5EC0B38F)
(at 80.75 33.75 180)
(descr http://www.meanwell.com/webapp/product/search.aspx?prod=IRM-05)
(tags "ACDC-Converter 5W Meanwell IRM-05")
(path /5EC7A3DD)
(fp_text reference PS101 (at 22.42 -11.88) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value IRM-05-5 (at 21.7 15.6) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -4 -1) (end -4 1) (layer F.SilkS) (width 0.12))
(fp_line (start 42.2 -11.3) (end 42.2 14.3) (layer F.SilkS) (width 0.12))
(fp_line (start -3.7 -11.3) (end 42.2 -11.3) (layer F.SilkS) (width 0.12))
(fp_line (start -3.6 14.2) (end 42.1 14.2) (layer F.Fab) (width 0.1))
(fp_line (start 42.1 -11.2) (end -3.6 -11.2) (layer F.Fab) (width 0.1))
(fp_line (start -3.85 -11.45) (end -3.85 14.45) (layer F.CrtYd) (width 0.05))
(fp_line (start -3.6 -11.2) (end -3.6 14.2) (layer F.Fab) (width 0.1))
(fp_line (start -3.7 14.3) (end 42.2 14.3) (layer F.SilkS) (width 0.12))
(fp_line (start -3.7 -11.3) (end -3.7 14.3) (layer F.SilkS) (width 0.12))
(fp_line (start 42.1 -11.2) (end 42.1 14.2) (layer F.Fab) (width 0.1))
(fp_line (start -3.85 14.45) (end 42.35 14.45) (layer F.CrtYd) (width 0.05))
(fp_line (start -3.85 -11.45) (end 42.35 -11.45) (layer F.CrtYd) (width 0.05))
(fp_line (start 42.35 -11.45) (end 42.35 14.45) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.6 0) (end -3.6 -1) (layer F.Fab) (width 0.1))
(fp_line (start -2.6 0) (end -3.6 1) (layer F.Fab) (width 0.1))
(fp_text user %R (at 22.42 0.48) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 thru_hole rect (at 0 0 180) (size 3 3) (drill 1.5) (layers *.Cu *.Mask)
(net 21 /L_Trafo))
(pad 4 thru_hole circle (at 38.5 2.75 180) (size 3 3) (drill 1.5) (layers *.Cu *.Mask)
(net 133 "Net-(C104-Pad2)"))
(pad 2 thru_hole circle (at 0 10.75 180) (size 3 3) (drill 1.5) (layers *.Cu *.Mask)
(net 23 /N_IN))
(pad 3 thru_hole circle (at 38.5 10.75 180) (size 3 3) (drill 1.5) (layers *.Cu *.Mask)
(net 2 GND))
(model ${KISYS3DMOD}/Converter_ACDC.3dshapes/Converter_ACDC_MeanWell_IRM-05-xx_THT.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5EC142EA)
(at 50.75 100.5 90)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5EE4C015)
(attr smd)
(fp_text reference C221 (at 0 1.43 270) (layer B.SilkS)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 100n (at 0 -1.43 270) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 270) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 45 /Controller/VDDA))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Inductor_SMD:L_10.4x10.4_H4.8 (layer F.Cu) (tedit 5990349B) (tstamp 5EC0B32D)
(at 27 31 180)
(descr "Choke, SMD, 10.4x10.4mm 4.8mm height")
(tags "Choke SMD")
(path /5ECF1E66)
(attr smd)
(fp_text reference L101 (at 0 -6.35) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10u (at 0 6.35) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 5.3 2.1) (end 5.3 5.3) (layer F.SilkS) (width 0.12))
(fp_line (start 5.3 5.3) (end -5.3 5.3) (layer F.SilkS) (width 0.12))
(fp_line (start -5.3 5.3) (end -5.3 2.1) (layer F.SilkS) (width 0.12))
(fp_line (start -5.3 -2.1) (end -5.3 -5.3) (layer F.SilkS) (width 0.12))
(fp_line (start -5.3 -5.3) (end 5.3 -5.3) (layer F.SilkS) (width 0.12))
(fp_line (start 5.3 -5.3) (end 5.3 -2.1) (layer F.SilkS) (width 0.12))
(fp_line (start -5.75 -5.45) (end -5.75 5.45) (layer F.CrtYd) (width 0.05))
(fp_line (start -5.75 5.45) (end 5.75 5.45) (layer F.CrtYd) (width 0.05))
(fp_line (start 5.75 5.45) (end 5.75 -5.45) (layer F.CrtYd) (width 0.05))
(fp_line (start 5.75 -5.45) (end -5.75 -5.45) (layer F.CrtYd) (width 0.05))
(fp_line (start 5.2 -5.2) (end 5.2 -2.1) (layer F.Fab) (width 0.1))
(fp_line (start -5.2 -5.2) (end -5.2 -2.1) (layer F.Fab) (width 0.1))
(fp_line (start 5.2 5.2) (end 5.2 2.1) (layer F.Fab) (width 0.1))
(fp_line (start -5.2 5.2) (end -5.2 2.1) (layer F.Fab) (width 0.1))
(fp_line (start -5.2 -5.2) (end 5.2 -5.2) (layer F.Fab) (width 0.1))
(fp_line (start -5.2 5.2) (end 5.2 5.2) (layer F.Fab) (width 0.1))
(fp_arc (start 0 0) (end -3.17 -3.17) (angle 90) (layer F.Fab) (width 0.1))
(fp_arc (start 0 0) (end 3.17 3.17) (angle 90) (layer F.Fab) (width 0.1))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 2 smd rect (at 4.15 0 180) (size 2.7 3.6) (layers F.Cu F.Paste F.Mask)
(net 46 +5VL))
(pad 1 smd rect (at -4.15 0 180) (size 2.7 3.6) (layers F.Cu F.Paste F.Mask)
(net 133 "Net-(C104-Pad2)"))
(model ${KISYS3DMOD}/Inductor_SMD.3dshapes/L_10.4x10.4_H4.8.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder (layer F.Cu) (tedit 5B301BBE) (tstamp 5EC0AF10)
(at 77.25 79.25 270)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags "inductor handsolder")
(path /5ED787BE)
(attr smd)
(fp_text reference FB102 (at 0 -1.43 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value "600 Ohm" (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.171267 -0.51) (end 0.171267 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.171267 0.51) (end 0.171267 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.65 0.73) (end -1.65 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.65 -0.73) (end 1.65 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.65 -0.73) (end 1.65 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.65 0.73) (end -1.65 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 2 smd roundrect (at 0.875 0 270) (size 1.05 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 134 "Net-(C115-Pad1)"))
(pad 1 smd roundrect (at -0.875 0 270) (size 1.05 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 53 +3.3VA))
(model ${KISYS3DMOD}/Inductor_SMD.3dshapes/L_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5EC0A9E5)
(at 77.25 76 90)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5ED8408E)
(attr smd)
(fp_text reference C115 (at 0 -1.43 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 134 "Net-(C115-Pad1)"))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_1210_3225Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5EC0A8A8)
(at 19.5 29.5 270)
(descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5ED508BB)
(attr smd)
(fp_text reference C107 (at 0 -2.28 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10u (at 0 2.28 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -1.6 1.25) (end -1.6 -1.25) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 -1.25) (end 1.6 -1.25) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 -1.25) (end 1.6 1.25) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 1.25) (end -1.6 1.25) (layer F.Fab) (width 0.1))
(fp_line (start -0.602064 -1.36) (end 0.602064 -1.36) (layer F.SilkS) (width 0.12))
(fp_line (start -0.602064 1.36) (end 0.602064 1.36) (layer F.SilkS) (width 0.12))
(fp_line (start -2.28 1.58) (end -2.28 -1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 -1.58) (end 2.28 -1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 -1.58) (end 2.28 1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 1.58) (end -2.28 1.58) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.8 0.8) (thickness 0.12)))
)
(pad 2 smd roundrect (at 1.4 0 270) (size 1.25 2.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 46 +5VL))
(pad 1 smd roundrect (at -1.4 0 270) (size 1.25 2.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_1210_3225Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5EC0A877)
(at 34.5 28 270)
(descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5ED4FDCA)
(attr smd)
(fp_text reference C105 (at 0 -2.28 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10u (at 0 2.28 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -1.6 1.25) (end -1.6 -1.25) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 -1.25) (end 1.6 -1.25) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 -1.25) (end 1.6 1.25) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 1.25) (end -1.6 1.25) (layer F.Fab) (width 0.1))
(fp_line (start -0.602064 -1.36) (end 0.602064 -1.36) (layer F.SilkS) (width 0.12))
(fp_line (start -0.602064 1.36) (end 0.602064 1.36) (layer F.SilkS) (width 0.12))
(fp_line (start -2.28 1.58) (end -2.28 -1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 -1.58) (end 2.28 -1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 -1.58) (end 2.28 1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 1.58) (end -2.28 1.58) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.8 0.8) (thickness 0.12)))
)
(pad 2 smd roundrect (at 1.4 0 270) (size 1.25 2.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 133 "Net-(C104-Pad2)"))
(pad 1 smd roundrect (at -1.4 0 270) (size 1.25 2.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_1210_3225Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5EC1D9FC)
(at 34.5 33.5 90)
(descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5ED3113D)
(attr smd)
(fp_text reference C104 (at 0 -2.28 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10u (at 0 2.28 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -1.6 1.25) (end -1.6 -1.25) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 -1.25) (end 1.6 -1.25) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 -1.25) (end 1.6 1.25) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 1.25) (end -1.6 1.25) (layer F.Fab) (width 0.1))
(fp_line (start -0.602064 -1.36) (end 0.602064 -1.36) (layer F.SilkS) (width 0.12))
(fp_line (start -0.602064 1.36) (end 0.602064 1.36) (layer F.SilkS) (width 0.12))
(fp_line (start -2.28 1.58) (end -2.28 -1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 -1.58) (end 2.28 -1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 -1.58) (end 2.28 1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 1.58) (end -2.28 1.58) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.8 0.8) (thickness 0.12)))
)
(pad 2 smd roundrect (at 1.4 0 90) (size 1.25 2.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 133 "Net-(C104-Pad2)"))
(pad 1 smd roundrect (at -1.4 0 90) (size 1.25 2.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(module Package_SO:SO-8_5.3x6.2mm_P1.27mm (layer B.Cu) (tedit 5A02F2D3) (tstamp 5E96AA0E)
(at 49.1 78.42 90)
(descr "8-Lead Plastic Small Outline, 5.3x6.2mm Body (http://www.ti.com.cn/cn/lit/ds/symlink/tl7705a.pdf)")
(tags "SOIC 1.27")
(path /5D77EC9D/5E9C446B)
(attr smd)
(fp_text reference U203 (at 0 4.13 90) (layer B.SilkS)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 25LCxxx (at 0 -4.13 90) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -2.75 2.55) (end -4.5 2.55) (layer B.SilkS) (width 0.15))
(fp_line (start -2.75 -3.205) (end 2.75 -3.205) (layer B.SilkS) (width 0.15))
(fp_line (start -2.75 3.205) (end 2.75 3.205) (layer B.SilkS) (width 0.15))
(fp_line (start -2.75 -3.205) (end -2.75 -2.455) (layer B.SilkS) (width 0.15))
(fp_line (start 2.75 -3.205) (end 2.75 -2.455) (layer B.SilkS) (width 0.15))
(fp_line (start 2.75 3.205) (end 2.75 2.455) (layer B.SilkS) (width 0.15))
(fp_line (start -2.75 3.205) (end -2.75 2.55) (layer B.SilkS) (width 0.15))
(fp_line (start -4.83 -3.35) (end 4.83 -3.35) (layer B.CrtYd) (width 0.05))
(fp_line (start -4.83 3.35) (end 4.83 3.35) (layer B.CrtYd) (width 0.05))
(fp_line (start 4.83 3.35) (end 4.83 -3.35) (layer B.CrtYd) (width 0.05))
(fp_line (start -4.83 3.35) (end -4.83 -3.35) (layer B.CrtYd) (width 0.05))
(fp_line (start -2.65 2.1) (end -1.65 3.1) (layer B.Fab) (width 0.15))
(fp_line (start -2.65 -3.1) (end -2.65 2.1) (layer B.Fab) (width 0.15))
(fp_line (start 2.65 -3.1) (end -2.65 -3.1) (layer B.Fab) (width 0.15))
(fp_line (start 2.65 3.1) (end 2.65 -3.1) (layer B.Fab) (width 0.15))
(fp_line (start -1.65 3.1) (end 2.65 3.1) (layer B.Fab) (width 0.15))
(fp_text user %R (at 0 0 90) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(pad 8 smd rect (at 3.7 1.905 90) (size 1.75 0.55) (layers B.Cu B.Paste B.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(pad 7 smd rect (at 3.7 0.635 90) (size 1.75 0.55) (layers B.Cu B.Paste B.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(pad 6 smd rect (at 3.7 -0.635 90) (size 1.75 0.55) (layers B.Cu B.Paste B.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 130 /Controller/SPI2_SCK))
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(pad 5 smd rect (at 3.7 -1.905 90) (size 1.75 0.55) (layers B.Cu B.Paste B.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 132 /Controller/SPI2_MOSI))
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(pad 4 smd rect (at -3.7 -1.905 90) (size 1.75 0.55) (layers B.Cu B.Paste B.Mask)
(net 2 GND))
(pad 3 smd rect (at -3.7 -0.635 90) (size 1.75 0.55) (layers B.Cu B.Paste B.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(pad 2 smd rect (at -3.7 0.635 90) (size 1.75 0.55) (layers B.Cu B.Paste B.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 131 /Controller/SPI2_MISO))
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(pad 1 smd rect (at -3.7 1.905 90) (size 1.75 0.55) (layers B.Cu B.Paste B.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 129 /Controller/~CS~_EEPROM))
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(model ${KISYS3DMOD}/Package_SO.3dshapes/SO-8_5.3x6.2mm_P1.27mm.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5E969A57)
(at 52.0175 72.81 180)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5EAAB237)
(attr smd)
(fp_text reference C220 (at 0 1.43) (layer B.SilkS)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 100n (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module TerminalBlock_RND:TerminalBlock_RND_205-00068_1x03_P7.50mm_Horizontal (layer F.Cu) (tedit 5B294F18) (tstamp 5DEF1386)
(at 91 23 270)
(descr "terminal block RND 205-00068, 3 pins, pitch 7.5mm, size 22.5x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND")
(tags "THT terminal block RND 205-00068 pitch 7.5mm size 22.5x10.3mm^2 drill 1.3mm pad 2.5mm")
(path /5D6DCF6A)
(fp_text reference J101 (at 7.5 -6.36 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value "230VAC IN" (at 7.5 6.06 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 19.25 -5.81) (end -4.25 -5.81) (layer F.CrtYd) (width 0.05))
(fp_line (start 19.25 5.5) (end 19.25 -5.81) (layer F.CrtYd) (width 0.05))
(fp_line (start -4.25 5.5) (end 19.25 5.5) (layer F.CrtYd) (width 0.05))
(fp_line (start -4.25 -5.81) (end -4.25 5.5) (layer F.CrtYd) (width 0.05))
(fp_line (start -4.05 5.3) (end -3.45 5.3) (layer F.SilkS) (width 0.12))
(fp_line (start -4.05 4.46) (end -4.05 5.3) (layer F.SilkS) (width 0.12))
(fp_line (start 16.25 -5.301) (end 16.25 -4.301) (layer F.SilkS) (width 0.12))
(fp_line (start 13.75 -5.301) (end 13.75 -4.301) (layer F.SilkS) (width 0.12))
(fp_line (start 13.75 -4.301) (end 16.25 -4.301) (layer F.SilkS) (width 0.12))
(fp_line (start 13.75 -5.301) (end 16.25 -5.301) (layer F.SilkS) (width 0.12))
(fp_line (start 16.25 -5.3) (end 13.75 -5.3) (layer F.Fab) (width 0.1))
(fp_line (start 16.25 -4.3) (end 16.25 -5.3) (layer F.Fab) (width 0.1))
(fp_line (start 13.75 -4.3) (end 16.25 -4.3) (layer F.Fab) (width 0.1))
(fp_line (start 13.75 -5.3) (end 13.75 -4.3) (layer F.Fab) (width 0.1))
(fp_line (start 13.799 0.076) (end 13.799 -0.076) (layer F.Fab) (width 0.1))
(fp_line (start 14.924 0.076) (end 13.799 0.076) (layer F.Fab) (width 0.1))
(fp_line (start 14.924 1.201) (end 14.924 0.076) (layer F.Fab) (width 0.1))
(fp_line (start 15.076 1.201) (end 14.924 1.201) (layer F.Fab) (width 0.1))
(fp_line (start 15.076 0.076) (end 15.076 1.201) (layer F.Fab) (width 0.1))
(fp_line (start 16.201 0.076) (end 15.076 0.076) (layer F.Fab) (width 0.1))
(fp_line (start 16.201 -0.076) (end 16.201 0.076) (layer F.Fab) (width 0.1))
(fp_line (start 15.076 -0.076) (end 16.201 -0.076) (layer F.Fab) (width 0.1))
(fp_line (start 15.076 -1.201) (end 15.076 -0.076) (layer F.Fab) (width 0.1))
(fp_line (start 14.924 -1.201) (end 15.076 -1.201) (layer F.Fab) (width 0.1))
(fp_line (start 14.924 -0.076) (end 14.924 -1.201) (layer F.Fab) (width 0.1))
(fp_line (start 13.799 -0.076) (end 14.924 -0.076) (layer F.Fab) (width 0.1))
(fp_line (start 8.75 -5.301) (end 8.75 -4.301) (layer F.SilkS) (width 0.12))
(fp_line (start 6.25 -5.301) (end 6.25 -4.301) (layer F.SilkS) (width 0.12))
(fp_line (start 6.25 -4.301) (end 8.75 -4.301) (layer F.SilkS) (width 0.12))
(fp_line (start 6.25 -5.301) (end 8.75 -5.301) (layer F.SilkS) (width 0.12))
(fp_line (start 8.75 -5.3) (end 6.25 -5.3) (layer F.Fab) (width 0.1))
(fp_line (start 8.75 -4.3) (end 8.75 -5.3) (layer F.Fab) (width 0.1))
(fp_line (start 6.25 -4.3) (end 8.75 -4.3) (layer F.Fab) (width 0.1))
(fp_line (start 6.25 -5.3) (end 6.25 -4.3) (layer F.Fab) (width 0.1))
(fp_line (start 6.299 0.076) (end 6.299 -0.076) (layer F.Fab) (width 0.1))
(fp_line (start 7.424 0.076) (end 6.299 0.076) (layer F.Fab) (width 0.1))
(fp_line (start 7.424 1.201) (end 7.424 0.076) (layer F.Fab) (width 0.1))
(fp_line (start 7.576 1.201) (end 7.424 1.201) (layer F.Fab) (width 0.1))
(fp_line (start 7.576 0.076) (end 7.576 1.201) (layer F.Fab) (width 0.1))
(fp_line (start 8.701 0.076) (end 7.576 0.076) (layer F.Fab) (width 0.1))
(fp_line (start 8.701 -0.076) (end 8.701 0.076) (layer F.Fab) (width 0.1))
(fp_line (start 7.576 -0.076) (end 8.701 -0.076) (layer F.Fab) (width 0.1))
(fp_line (start 7.576 -1.201) (end 7.576 -0.076) (layer F.Fab) (width 0.1))
(fp_line (start 7.424 -1.201) (end 7.576 -1.201) (layer F.Fab) (width 0.1))
(fp_line (start 7.424 -0.076) (end 7.424 -1.201) (layer F.Fab) (width 0.1))
(fp_line (start 6.299 -0.076) (end 7.424 -0.076) (layer F.Fab) (width 0.1))
(fp_line (start 1.25 -5.301) (end 1.25 -4.301) (layer F.SilkS) (width 0.12))
(fp_line (start -1.25 -5.301) (end -1.25 -4.301) (layer F.SilkS) (width 0.12))
(fp_line (start -1.25 -4.301) (end 1.25 -4.301) (layer F.SilkS) (width 0.12))
(fp_line (start -1.25 -5.301) (end 1.25 -5.301) (layer F.SilkS) (width 0.12))
(fp_line (start 1.25 -5.3) (end -1.25 -5.3) (layer F.Fab) (width 0.1))
(fp_line (start 1.25 -4.3) (end 1.25 -5.3) (layer F.Fab) (width 0.1))
(fp_line (start -1.25 -4.3) (end 1.25 -4.3) (layer F.Fab) (width 0.1))
(fp_line (start -1.25 -5.3) (end -1.25 -4.3) (layer F.Fab) (width 0.1))
(fp_line (start -1.201 0.076) (end -1.201 -0.076) (layer F.Fab) (width 0.1))
(fp_line (start -0.076 0.076) (end -1.201 0.076) (layer F.Fab) (width 0.1))
(fp_line (start -0.076 1.201) (end -0.076 0.076) (layer F.Fab) (width 0.1))
(fp_line (start 0.076 1.201) (end -0.076 1.201) (layer F.Fab) (width 0.1))
(fp_line (start 0.076 0.076) (end 0.076 1.201) (layer F.Fab) (width 0.1))
(fp_line (start 1.201 0.076) (end 0.076 0.076) (layer F.Fab) (width 0.1))
(fp_line (start 1.201 -0.076) (end 1.201 0.076) (layer F.Fab) (width 0.1))
(fp_line (start 0.076 -0.076) (end 1.201 -0.076) (layer F.Fab) (width 0.1))
(fp_line (start 0.076 -1.201) (end 0.076 -0.076) (layer F.Fab) (width 0.1))
(fp_line (start -0.076 -1.201) (end 0.076 -1.201) (layer F.Fab) (width 0.1))
(fp_line (start -0.076 -0.076) (end -0.076 -1.201) (layer F.Fab) (width 0.1))
(fp_line (start -1.201 -0.076) (end -0.076 -0.076) (layer F.Fab) (width 0.1))
(fp_line (start 18.811 -5.36) (end 18.811 5.06) (layer F.SilkS) (width 0.12))
(fp_line (start -3.81 -5.36) (end -3.81 5.06) (layer F.SilkS) (width 0.12))
(fp_line (start -3.81 5.06) (end 18.811 5.06) (layer F.SilkS) (width 0.12))
(fp_line (start -3.81 -5.36) (end 18.811 -5.36) (layer F.SilkS) (width 0.12))
(fp_line (start -3.81 -3.301) (end 18.811 -3.301) (layer F.SilkS) (width 0.12))
(fp_line (start -3.75 -3.3) (end 18.75 -3.3) (layer F.Fab) (width 0.1))
(fp_line (start -3.81 3.8) (end 18.811 3.8) (layer F.SilkS) (width 0.12))
(fp_line (start -3.75 3.8) (end 18.75 3.8) (layer F.Fab) (width 0.1))
(fp_line (start -3.81 4.4) (end 18.811 4.4) (layer F.SilkS) (width 0.12))
(fp_line (start -3.75 4.4) (end 18.75 4.4) (layer F.Fab) (width 0.1))
(fp_line (start -3.75 4.4) (end -3.75 -5.3) (layer F.Fab) (width 0.1))
(fp_line (start -3.15 5) (end -3.75 4.4) (layer F.Fab) (width 0.1))
(fp_line (start 18.75 5) (end -3.15 5) (layer F.Fab) (width 0.1))
(fp_line (start 18.75 -5.3) (end 18.75 5) (layer F.Fab) (width 0.1))
(fp_line (start -3.75 -5.3) (end 18.75 -5.3) (layer F.Fab) (width 0.1))
(fp_circle (center 15 0) (end 16.68 0) (layer F.SilkS) (width 0.12))
(fp_circle (center 15 0) (end 16.5 0) (layer F.Fab) (width 0.1))
(fp_circle (center 7.5 0) (end 9.18 0) (layer F.SilkS) (width 0.12))
(fp_circle (center 7.5 0) (end 9 0) (layer F.Fab) (width 0.1))
(fp_circle (center 0 0) (end 1.5 0) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 7.5 2.85 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(fp_arc (start 0 0) (end -0.789 1.484) (angle -29) (layer F.SilkS) (width 0.12))
(fp_arc (start 0 0) (end -1.484 -0.789) (angle -56) (layer F.SilkS) (width 0.12))
(fp_arc (start 0 0) (end 0.789 -1.484) (angle -56) (layer F.SilkS) (width 0.12))
(fp_arc (start 0 0) (end 1.484 0.789) (angle -56) (layer F.SilkS) (width 0.12))
(fp_arc (start 0 0) (end 0 1.68) (angle -28) (layer F.SilkS) (width 0.12))
(pad 3 thru_hole circle (at 15 0 270) (size 2.5 2.5) (drill 1.3) (layers *.Cu *.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 22 /L_IN))
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(pad 2 thru_hole circle (at 7.5 0 270) (size 2.5 2.5) (drill 1.3) (layers *.Cu *.Mask)
(net 1 Earth))
(pad 1 thru_hole rect (at 0 0 270) (size 2.5 2.5) (drill 1.3) (layers *.Cu *.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 23 /N_IN))
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(model ${KISYS3DMOD}/TerminalBlock_RND.3dshapes/TerminalBlock_RND_205-00068_1x03_P7.50mm_Horizontal.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module proz_unknown:1271.1001 (layer F.Cu) (tedit 5E866345) (tstamp 5E0E4506)
(at 21 56 180)
(path /5E220866)
(fp_text reference FID102 (at 0.5 8 180) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value LightGuide (at 4.1 -2.5 180) (layer F.Fab) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -1.8 1.2) (end -1.8 -1.2) (layer F.CrtYd) (width 0.12))
(fp_line (start -6 1.2) (end -1.8 1.2) (layer F.CrtYd) (width 0.12))
(fp_line (start -6 -1.2) (end -6 1.2) (layer F.CrtYd) (width 0.12))
(fp_line (start -1.8 -1.2) (end -6 -1.2) (layer F.CrtYd) (width 0.12))
(fp_line (start -1.5 1.5) (end -1.5 -1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start 1.5 -1.5) (end 1.5 1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start -6.3 -1.5) (end -6.3 1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start 8.1 -1.5) (end -6.3 -1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start 8.1 1.5) (end 8.1 -1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start -6.3 1.5) (end 8.1 1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start -2.5 -1.5) (end 2.5 -1.5) (layer F.SilkS) (width 0.15))
(fp_line (start -2.5 1.5) (end 2.5 1.5) (layer F.SilkS) (width 0.15))
(pad "" np_thru_hole circle (at 0 0 180) (size 2.3 2.3) (drill 2.3) (layers *.Cu *.Mask))
(model ${KIPRJMOD}/lightguide.x3d
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
add GND points near test points to get good ground connection
2020-02-18 20:37:26 +01:00
(module TestPoint:TestPoint_Pad_D1.5mm (layer F.Cu) (tedit 5E4C3C37) (tstamp 5E4CFE9F)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(at 84 83.5)
add GND points near test points to get good ground connection
2020-02-18 20:37:26 +01:00
(descr "SMD pad as test Point, diameter 1.5mm")
(tags "test point SMD pad")
(path /5D8C5188/5E5AA625)
(attr virtual)
(fp_text reference TP306 (at 1.75 -0.5 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value GND (at 0 1.75) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_circle (center 0 0) (end 0 0.95) (layer F.SilkS) (width 0.12))
(fp_circle (center 0 0) (end 1.25 0) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 1.25 2.25) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 smd circle (at 0 0) (size 1.5 1.5) (layers F.Cu F.Mask)
(net 2 GND) (zone_connect 2))
)
(module TestPoint:TestPoint_Pad_D1.5mm (layer F.Cu) (tedit 5E4C3C60) (tstamp 5E4CFE97)
(at 65.75 89.5)
(descr "SMD pad as test Point, diameter 1.5mm")
(tags "test point SMD pad")
(path /5D8C5188/5E59C2BA)
(attr virtual)
(fp_text reference TP305 (at -3 -1 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value GND (at 0 1.75) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_circle (center 0 0) (end 0 0.95) (layer F.SilkS) (width 0.12))
(fp_circle (center 0 0) (end 1.25 0) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 -1.65) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 smd circle (at 0 0) (size 1.5 1.5) (layers F.Cu F.Mask)
(net 2 GND) (zone_connect 2))
)
(module TestPoint:TestPoint_Pad_D1.5mm (layer F.Cu) (tedit 5E4C3C13) (tstamp 5E4CFE8F)
(at 64 105)
(descr "SMD pad as test Point, diameter 1.5mm")
(tags "test point SMD pad")
(path /5D8C5188/5E5831F5)
(attr virtual)
(fp_text reference TP304 (at -4 2.25) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value GND (at 0 1.75) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_circle (center 0 0) (end 0 0.95) (layer F.SilkS) (width 0.12))
(fp_circle (center 0 0) (end 1.25 0) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 -1.65) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 smd circle (at 0 0) (size 1.5 1.5) (layers F.Cu F.Mask)
(net 2 GND) (zone_connect 2))
)
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(module shimatta_smd:MCC-SDMICRO3-112J-TDAR-R01 (layer F.Cu) (tedit 5E0F7980) (tstamp 5E9659F5)
(at 29 67.5 270)
remove selectable voltage level for level shifter on LCB bus. This does not work
2020-02-18 20:12:22 +01:00
(path /5D77EC9D/5DB776DE)
(fp_text reference CON201 (at 13.5 -2.5 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value Micro_SD (at 7.25 -2.25 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.4 14.5) (end -0.4 13.8) (layer F.Fab) (width 0.12))
(fp_line (start 13.8 1.5) (end 13.8 14.5) (layer F.Fab) (width 0.12))
(fp_line (start 12.4 1.5) (end 13.8 1.5) (layer F.Fab) (width 0.12))
(fp_line (start 12.4 1) (end 12.4 1.5) (layer F.Fab) (width 0.12))
(fp_line (start 13.8 1) (end 12.4 1) (layer F.Fab) (width 0.12))
(fp_line (start 13.8 0) (end 13.8 1) (layer F.Fab) (width 0.12))
(fp_line (start -0.7 0) (end 13.8 0) (layer F.Fab) (width 0.12))
(fp_line (start -0.7 13.8) (end -0.7 0) (layer F.Fab) (width 0.12))
(fp_line (start 7.7 13.8) (end -0.7 13.8) (layer F.Fab) (width 0.12))
(fp_line (start 9.5 14.5) (end 7.7 13.8) (layer F.Fab) (width 0.12))
(fp_line (start 13.8 14.5) (end 9.5 14.5) (layer F.Fab) (width 0.12))
(fp_line (start -0.4 15.5) (end -0.4 14.5) (layer F.Fab) (width 0.12))
(fp_line (start 0.8 16.7) (end 9.4 16.7) (layer F.Fab) (width 0.12))
(fp_line (start 10.6 15.5) (end 10.6 14.5) (layer F.Fab) (width 0.12))
(fp_line (start 0.8 15.7) (end 9.4 15.7) (layer F.Fab) (width 0.12))
(fp_line (start -2.25 14.5) (end -2.25 -1.5) (layer F.CrtYd) (width 0.15))
(fp_line (start 15.25 14.5) (end -2.25 14.5) (layer F.CrtYd) (width 0.15))
(fp_line (start 15.25 -1.5) (end 15.25 14.5) (layer F.CrtYd) (width 0.15))
(fp_line (start -2.25 -1.5) (end 15.25 -1.5) (layer F.CrtYd) (width 0.15))
(fp_line (start -0.4 2.75) (end -0.4 14.5) (layer F.SilkS) (width 0.15))
(fp_line (start 0.75 2.75) (end -0.4 2.75) (layer F.SilkS) (width 0.15))
(fp_line (start 10 2.75) (end 0.75 2.75) (layer F.SilkS) (width 0.15))
(fp_line (start 10 6.55) (end 10 2.75) (layer F.SilkS) (width 0.15))
(fp_line (start 10.6 7.1) (end 10 6.55) (layer F.SilkS) (width 0.15))
(fp_line (start 10.6 8.1) (end 10.6 7.1) (layer F.SilkS) (width 0.15))
(fp_line (start 10 8.55) (end 10.6 8.1) (layer F.SilkS) (width 0.15))
(fp_line (start 10.6 8.9) (end 10 8.55) (layer F.SilkS) (width 0.15))
(fp_line (start 10.6 14.5) (end 10.6 8.9) (layer F.SilkS) (width 0.15))
(fp_line (start -0.4 14.5) (end 10.6 14.5) (layer F.SilkS) (width 0.15))
(fp_line (start -2.25 14.5) (end -2.25 11.25) (layer F.SilkS) (width 0.15))
(fp_line (start 15.25 -1.5) (end 15.25 14.5) (layer F.SilkS) (width 0.15))
(fp_line (start -2.25 -1.5) (end 15.25 -1.5) (layer F.SilkS) (width 0.15))
(fp_line (start -2.25 -1.25) (end -2.25 -1.5) (layer F.SilkS) (width 0.15))
(fp_line (start -2.25 11.25) (end -2.25 -1.25) (layer F.SilkS) (width 0.15))
(fp_line (start 9.6 4) (end 9.6 6) (layer F.CrtYd) (width 0.15))
(fp_line (start 0.6 4) (end 9.6 4) (layer F.CrtYd) (width 0.15))
(fp_line (start 0.6 6) (end 0.6 4) (layer F.CrtYd) (width 0.15))
(fp_line (start 9.6 6) (end 0.6 6) (layer F.CrtYd) (width 0.15))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user Inserted (at 8.1 16.4 90) (layer F.Fab)
(effects (font (size 0.25 0.25) (thickness 0.05)))
)
(fp_arc (start 0.8 15.5) (end -0.4 15.5) (angle -90) (layer F.Fab) (width 0.12))
(fp_arc (start 9.4 15.5) (end 9.4 16.7) (angle -90) (layer F.Fab) (width 0.12))
(fp_text user Push-in (at 8.1 15.4 90) (layer F.Fab)
(effects (font (size 0.25 0.25) (thickness 0.05)))
)
(fp_arc (start 0.8 14.5) (end -0.4 14.5) (angle -90) (layer F.Fab) (width 0.12))
(fp_arc (start 9.4 14.5) (end 9.4 15.7) (angle -90) (layer F.Fab) (width 0.12))
remove selectable voltage level for level shifter on LCB bus. This does not work
2020-02-18 20:12:22 +01:00
(pad 11 smd rect (at 14.3 10.1 270) (size 1.2 2.2) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad "" np_thru_hole circle (at 9.6 10.5 270) (size 1 1) (drill 1) (layers *.Cu *.Mask))
(pad "" np_thru_hole circle (at 1.6 10.5 270) (size 1 1) (drill 1) (layers *.Cu *.Mask))
(pad 12 smd rect (at -1.2 10.1 270) (size 1.2 2.2) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad 13 smd rect (at -1.2 0.5 270) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad 10 smd rect (at 13.4 0.5 270) (size 1.6 1.4) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad 1 smd rect (at 8.8 0 270) (size 0.7 1.6) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 18 /Controller/SDIO_D2))
remove selectable voltage level for level shifter on LCB bus. This does not work
2020-02-18 20:12:22 +01:00
(pad 2 smd rect (at 7.7 0 270) (size 0.7 1.6) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 17 /Controller/SDIO_D3))
remove selectable voltage level for level shifter on LCB bus. This does not work
2020-02-18 20:12:22 +01:00
(pad 3 smd rect (at 6.6 0 270) (size 0.7 1.6) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 16 /Controller/SDIO_CMD))
remove selectable voltage level for level shifter on LCB bus. This does not work
2020-02-18 20:12:22 +01:00
(pad 4 smd rect (at 5.5 0 270) (size 0.7 1.6) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
remove selectable voltage level for level shifter on LCB bus. This does not work
2020-02-18 20:12:22 +01:00
(pad 5 smd rect (at 4.4 0 270) (size 0.7 1.6) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 15 /Controller/SDIO_CLK))
remove selectable voltage level for level shifter on LCB bus. This does not work
2020-02-18 20:12:22 +01:00
(pad 6 smd rect (at 3.3 0 270) (size 0.7 1.6) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad 7 smd rect (at 2.2 0 270) (size 0.7 1.6) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 14 /Controller/SDIO_D0))
remove selectable voltage level for level shifter on LCB bus. This does not work
2020-02-18 20:12:22 +01:00
(pad 8 smd rect (at 1.1 0 270) (size 0.7 1.6) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 13 /Controller/SDIO_D1))
remove selectable voltage level for level shifter on LCB bus. This does not work
2020-02-18 20:12:22 +01:00
(pad 9 smd rect (at 0 0 270) (size 0.7 1.6) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 47 /Controller/CARD_DETECT))
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(model ${KIPRJMOD}/attend-microsd.wrl
(offset (xyz 5.6 0 0))
(scale (xyz 393 393 393))
(rotate (xyz -90 0 180))
)
remove selectable voltage level for level shifter on LCB bus. This does not work
2020-02-18 20:12:22 +01:00
)
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(module Package_TO_SOT_SMD:SOT-23-6 (layer F.Cu) (tedit 5A02FF57) (tstamp 5E4B1664)
(at 37.5 104.75 270)
(descr "6-pin SOT-23 package")
(tags SOT-23-6)
(path /5E0FFF2E)
(attr smd)
(fp_text reference U102 (at -0.75 -2.5 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value USBLC6-2SC6 (at 0 2.9 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 0.9 -1.55) (end 0.9 1.55) (layer F.Fab) (width 0.1))
(fp_line (start 0.9 1.55) (end -0.9 1.55) (layer F.Fab) (width 0.1))
(fp_line (start -0.9 -0.9) (end -0.9 1.55) (layer F.Fab) (width 0.1))
(fp_line (start 0.9 -1.55) (end -0.25 -1.55) (layer F.Fab) (width 0.1))
(fp_line (start -0.9 -0.9) (end -0.25 -1.55) (layer F.Fab) (width 0.1))
(fp_line (start -1.9 -1.8) (end -1.9 1.8) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.9 1.8) (end 1.9 1.8) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.9 1.8) (end 1.9 -1.8) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.9 -1.8) (end -1.9 -1.8) (layer F.CrtYd) (width 0.05))
(fp_line (start 0.9 -1.61) (end -1.55 -1.61) (layer F.SilkS) (width 0.12))
(fp_line (start -0.9 1.61) (end 0.9 1.61) (layer F.SilkS) (width 0.12))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.075)))
)
(pad 5 smd rect (at 1.1 0 270) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(pad 6 smd rect (at 1.1 -0.95 270) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 24 /DIGIO3))
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(pad 4 smd rect (at 1.1 0.95 270) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 25 /DIGIO2))
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(pad 3 smd rect (at -1.1 0.95 270) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 120 /DIGIO2_PROT))
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(pad 2 smd rect (at -1.1 0 270) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad 1 smd rect (at -1.1 -0.95 270) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 121 /DIGIO3_PROT))
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-23-6.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Package_TO_SOT_SMD:SOT-23-6 (layer F.Cu) (tedit 5A02FF57) (tstamp 5E4B164E)
(at 33.75 104.75 270)
(descr "6-pin SOT-23 package")
(tags SOT-23-6)
(path /5E0F7F35)
(attr smd)
(fp_text reference U101 (at 0 2.5 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value USBLC6-2SC6 (at 0 2.9 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 0.9 -1.55) (end 0.9 1.55) (layer F.Fab) (width 0.1))
(fp_line (start 0.9 1.55) (end -0.9 1.55) (layer F.Fab) (width 0.1))
(fp_line (start -0.9 -0.9) (end -0.9 1.55) (layer F.Fab) (width 0.1))
(fp_line (start 0.9 -1.55) (end -0.25 -1.55) (layer F.Fab) (width 0.1))
(fp_line (start -0.9 -0.9) (end -0.25 -1.55) (layer F.Fab) (width 0.1))
(fp_line (start -1.9 -1.8) (end -1.9 1.8) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.9 1.8) (end 1.9 1.8) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.9 1.8) (end 1.9 -1.8) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.9 -1.8) (end -1.9 -1.8) (layer F.CrtYd) (width 0.05))
(fp_line (start 0.9 -1.61) (end -1.55 -1.61) (layer F.SilkS) (width 0.12))
(fp_line (start -0.9 1.61) (end 0.9 1.61) (layer F.SilkS) (width 0.12))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.075)))
)
(pad 5 smd rect (at 1.1 0 270) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(pad 6 smd rect (at 1.1 -0.95 270) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 26 /DIGIO1))
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(pad 4 smd rect (at 1.1 0.95 270) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 27 /DIGIO0))
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(pad 3 smd rect (at -1.1 0.95 270) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 118 /DIGIO0_PROT))
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(pad 2 smd rect (at -1.1 0 270) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad 1 smd rect (at -1.1 -0.95 270) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 119 /DIGIO1_PROT))
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-23-6.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(module TestPoint:TestPoint_Pad_D1.5mm (layer F.Cu) (tedit 5A0F774F) (tstamp 5E3FC308)
(at 76 83.5)
(descr "SMD pad as test Point, diameter 1.5mm")
(tags "test point SMD pad")
(path /5D8C5188/5E4680D7)
(attr virtual)
Re-enumerate components. This finilizes draft version for V1.2
2020-02-18 20:19:59 +01:00
(fp_text reference TP302 (at -3.25 -1.75) (layer F.SilkS)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value IBIAS (at 0 1.75) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_circle (center 0 0) (end 0 0.95) (layer F.SilkS) (width 0.12))
(fp_circle (center 0 0) (end 1.25 0) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 -1.65) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 smd circle (at 0 0) (size 1.5 1.5) (layers F.Cu F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 10 /Frontend/FORCE-))
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
)
(module TestPoint:TestPoint_Pad_D1.5mm (layer F.Cu) (tedit 5A0F774F) (tstamp 5E3F8ABB)
(at 67 105)
(descr "SMD pad as test Point, diameter 1.5mm")
(tags "test point SMD pad")
(path /5D8C5188/5E42D334)
(attr virtual)
Re-enumerate components. This finilizes draft version for V1.2
2020-02-18 20:19:59 +01:00
(fp_text reference TP303 (at 0 2) (layer F.SilkS)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value TEMP_OUT (at 0 1.75) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_circle (center 0 0) (end 0 0.95) (layer F.SilkS) (width 0.12))
(fp_circle (center 0 0) (end 1.25 0) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 -1.65) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 smd circle (at 0 0) (size 1.5 1.5) (layers F.Cu F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 20 /Controller/TEMP_IN))
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
)
(module TestPoint:TestPoint_Pad_D1.5mm (layer F.Cu) (tedit 5A0F774F) (tstamp 5E3F8AB3)
(at 65.75 87.25 90)
(descr "SMD pad as test Point, diameter 1.5mm")
(tags "test point SMD pad")
(path /5D8C5188/5E43ED77)
(attr virtual)
(fp_text reference TP301 (at 0 -1.648 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value VREF (at 0 1.75 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_circle (center 0 0) (end 0 0.95) (layer F.SilkS) (width 0.12))
(fp_circle (center 0 0) (end 1.25 0) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 -1.65 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 smd circle (at 0 0 90) (size 1.5 1.5) (layers F.Cu F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 117 /Frontend/VREF_OP))
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3D9AE4)
(at 71.5 101.75 270)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E6300E3)
(attr smd)
Re-enumerate components. This finilizes draft version for V1.2
2020-02-18 20:19:59 +01:00
(fp_text reference R314 (at 0.5 1.25 90) (layer F.SilkS)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100 (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 66 "Net-(R314-Pad2)"))
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 128 "Net-(R314-Pad1)"))
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Package_TO_SOT_SMD:SOT-23 (layer F.Cu) (tedit 5A02FF57) (tstamp 5E3C9052)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(at 80 82.25 270)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(descr "SOT-23, Standard")
(tags SOT-23)
(path /5D8C5188/5E5592F3)
Re-annotate components
2020-02-05 18:58:36 +01:00
(attr smd)
add GND points near test points to get good ground connection
2020-02-18 20:37:26 +01:00
(fp_text reference U302 (at -1.5 -2.5 90) (layer F.SilkS)
Re-annotate components
2020-02-05 18:58:36 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(fp_text value TL431LI-DBZ (at 0 2.5 90) (layer F.Fab)
Re-annotate components
2020-02-05 18:58:36 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_line (start 0.76 1.58) (end -0.7 1.58) (layer F.SilkS) (width 0.12))
(fp_line (start 0.76 -1.58) (end -1.4 -1.58) (layer F.SilkS) (width 0.12))
(fp_line (start -1.7 1.75) (end -1.7 -1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.7 1.75) (end -1.7 1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.7 -1.75) (end 1.7 1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.7 -1.75) (end 1.7 -1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start 0.76 -1.58) (end 0.76 -0.65) (layer F.SilkS) (width 0.12))
(fp_line (start 0.76 1.58) (end 0.76 0.65) (layer F.SilkS) (width 0.12))
(fp_line (start -0.7 1.52) (end 0.7 1.52) (layer F.Fab) (width 0.1))
(fp_line (start 0.7 -1.52) (end 0.7 1.52) (layer F.Fab) (width 0.1))
(fp_line (start -0.7 -0.95) (end -0.15 -1.52) (layer F.Fab) (width 0.1))
(fp_line (start -0.15 -1.52) (end 0.7 -1.52) (layer F.Fab) (width 0.1))
(fp_line (start -0.7 -0.95) (end -0.7 1.5) (layer F.Fab) (width 0.1))
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(fp_text user %R (at 0 0) (layer F.Fab)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(effects (font (size 0.5 0.5) (thickness 0.075)))
Re-annotate components
2020-02-05 18:58:36 +01:00
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 3 smd rect (at 1 0 270) (size 0.9 0.8) (layers F.Cu F.Paste F.Mask)
Re-annotate components
2020-02-05 18:58:36 +01:00
(net 2 GND))
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 2 smd rect (at -1 0.95 270) (size 0.9 0.8) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 117 /Frontend/VREF_OP))
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 1 smd rect (at -1 -0.95 270) (size 0.9 0.8) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 117 /Frontend/VREF_OP))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl
Re-annotate components
2020-02-05 18:58:36 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Package_SO:TSSOP-14_4.4x5mm_P0.65mm (layer F.Cu) (tedit 5A02F25C) (tstamp 5E3C903D)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(at 76.75 96.25)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(descr "14-Lead Plastic Thin Shrink Small Outline (ST)-4.4 mm Body [TSSOP] (see Microchip Packaging Specification 00000049BS.pdf)")
(tags "SSOP 0.65")
(path /5D8C5188/5E3F0A96)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(attr smd)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(fp_text reference U301 (at -2.25 -3.55) (layer F.SilkS)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value MCP6V34 (at 0 3.55) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -2.325 -2.5) (end -3.675 -2.5) (layer F.SilkS) (width 0.15))
(fp_line (start -2.325 2.625) (end 2.325 2.625) (layer F.SilkS) (width 0.15))
(fp_line (start -2.325 -2.625) (end 2.325 -2.625) (layer F.SilkS) (width 0.15))
(fp_line (start -2.325 2.625) (end -2.325 2.4) (layer F.SilkS) (width 0.15))
(fp_line (start 2.325 2.625) (end 2.325 2.4) (layer F.SilkS) (width 0.15))
(fp_line (start 2.325 -2.625) (end 2.325 -2.4) (layer F.SilkS) (width 0.15))
(fp_line (start -2.325 -2.625) (end -2.325 -2.5) (layer F.SilkS) (width 0.15))
(fp_line (start -3.95 2.8) (end 3.95 2.8) (layer F.CrtYd) (width 0.05))
(fp_line (start -3.95 -2.8) (end 3.95 -2.8) (layer F.CrtYd) (width 0.05))
(fp_line (start 3.95 -2.8) (end 3.95 2.8) (layer F.CrtYd) (width 0.05))
(fp_line (start -3.95 -2.8) (end -3.95 2.8) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.2 -1.5) (end -1.2 -2.5) (layer F.Fab) (width 0.15))
(fp_line (start -2.2 2.5) (end -2.2 -1.5) (layer F.Fab) (width 0.15))
(fp_line (start 2.2 2.5) (end -2.2 2.5) (layer F.Fab) (width 0.15))
(fp_line (start 2.2 -2.5) (end 2.2 2.5) (layer F.Fab) (width 0.15))
(fp_line (start -1.2 -2.5) (end 2.2 -2.5) (layer F.Fab) (width 0.15))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.8 0.8) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 14 smd rect (at 2.95 -1.95) (size 1.45 0.45) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 125 "Net-(C303-Pad1)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 13 smd rect (at 2.95 -1.3) (size 1.45 0.45) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 124 "Net-(C303-Pad2)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 12 smd rect (at 2.95 -0.65) (size 1.45 0.45) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 11 /Frontend/SENS+))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 11 smd rect (at 2.95 0) (size 1.45 0.45) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad 10 smd rect (at 2.95 0.65) (size 1.45 0.45) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 12 /Frontend/SENS-))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 9 smd rect (at 2.95 1.3) (size 1.45 0.45) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 122 "Net-(C302-Pad2)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 8 smd rect (at 2.95 1.95) (size 1.45 0.45) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 123 "Net-(C302-Pad1)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 7 smd rect (at -2.95 1.95) (size 1.45 0.45) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 128 "Net-(R314-Pad1)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 6 smd rect (at -2.95 1.3) (size 1.45 0.45) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 65 "Net-(R311-Pad1)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 5 smd rect (at -2.95 0.65) (size 1.45 0.45) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 49 "Net-(C306-Pad1)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 4 smd rect (at -2.95 0) (size 1.45 0.45) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 53 +3.3VA))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 3 smd rect (at -2.95 -0.65) (size 1.45 0.45) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 61 "Net-(C304-Pad1)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 2 smd rect (at -2.95 -1.3) (size 1.45 0.45) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 10 /Frontend/FORCE-))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 1 smd rect (at -2.95 -1.95) (size 1.45 0.45) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 9 /Frontend/FORCE+))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(model ${KISYS3DMOD}/Package_SO.3dshapes/TSSOP-14_4.4x5mm_P0.65mm.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3C8D0C)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(at 80.25 89)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5D90BA7B)
(attr smd)
Re-enumerate components. This finilizes draft version for V1.2
2020-02-18 20:19:59 +01:00
(fp_text reference R317 (at 0 -4) (layer F.SilkS)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value "1k 0.1%" (at 0 1.43) (layer F.Fab)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 10 /Frontend/FORCE-))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3C8CDB)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(at 76.5 100.75 180)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E3A5DAA)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(attr smd)
Re-enumerate components. This finilizes draft version for V1.2
2020-02-18 20:19:59 +01:00
(fp_text reference R315 (at 0 -8.25) (layer F.SilkS)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value "5k 0.1%" (at 0 1.43) (layer F.Fab)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 66 "Net-(R314-Pad2)"))
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 65 "Net-(R311-Pad1)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3C8CAA)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(at 76.5 102.5)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(path /5D8C5188/5E381FD9)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(attr smd)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(fp_text reference R312 (at 0 8) (layer F.SilkS)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value "1k 0.1%" (at 0 1.43) (layer F.Fab)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 65 "Net-(R311-Pad1)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 123 "Net-(C302-Pad1)"))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3C8C99)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(at 70.25 98.25 270)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E6BEB7A)
(attr smd)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(fp_text reference R311 (at 0 -1.43 90) (layer F.SilkS)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(fp_text value DNP (at 0 1.43 90) (layer F.Fab)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 126 "Net-(C306-Pad2)"))
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 65 "Net-(R311-Pad1)"))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3C8C88)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(at 71.75 94.5 90)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(path /5D8C5188/5D947159)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(attr smd)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(fp_text reference R310 (at 3.5 -1 90) (layer F.SilkS)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(fp_text value "1k 0.1%" (at 0 1.43 90) (layer F.Fab)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(net 2 GND))
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 61 "Net-(C304-Pad1)"))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3C8C77)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(at 67 101.5 90)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E352DB6)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(attr smd)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(fp_text reference R309 (at -0.75 -1.25 90) (layer F.SilkS)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(fp_text value "5k 0.1%" (at 0 1.43 90) (layer F.Fab)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 49 "Net-(C306-Pad1)"))
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(net 2 GND))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3CE587)
(at 67 98.25 90)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E333B2A)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(attr smd)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(fp_text reference R307 (at 0 -1.43 90) (layer F.SilkS)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(fp_text value "1k 0.1%" (at 0 1.43 90) (layer F.Fab)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 125 "Net-(C303-Pad1)"))
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 49 "Net-(C306-Pad1)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3C8C35)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(at 68.75 94.5 90)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5D9371CC)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(attr smd)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(fp_text reference R306 (at 3.5 -1 90) (layer F.SilkS)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(fp_text value "24k 0.1%" (at 0 1.43 90) (layer F.Fab)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 117 /Frontend/VREF_OP))
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 61 "Net-(C304-Pad1)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3C8C24)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(at 80.25 91)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(path /5D8C5188/5E255618)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(attr smd)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(fp_text reference R305 (at 0 -4.75) (layer F.SilkS)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(effects (font (size 1 1) (thickness 0.15)))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value "1k 0.1%" (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 124 "Net-(C303-Pad2)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 125 "Net-(C303-Pad1)"))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3C8C13)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(at 80.5 102.5)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E292BD1)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(fp_text reference R304 (at 0 1.25) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value "1k 0.1%" (at 0 1.43) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 122 "Net-(C302-Pad2)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 123 "Net-(C302-Pad1)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3C8C02)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(at 80.75 79.75)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5D929598)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text reference R303 (at 0 1.25) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text value 150 (at 0 1.43) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 117 /Frontend/VREF_OP))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 53 +3.3VA))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3C8BF1)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(at 82.5 91.75 90)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E25723A)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(fp_text reference R302 (at 0 1.5 90) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(fp_text value "1k 0.1%" (at 0 1.43 90) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(net 2 GND))
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 124 "Net-(C303-Pad2)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3C8BE0)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(at 83 96.75 90)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E292BD7)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(fp_text reference R301 (at 0 -1.43 90) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(fp_text value "1k 0.1%" (at 0 1.43 90) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(net 2 GND))
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 122 "Net-(C302-Pad2)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5E3C8231)
(at 77 97.5 180)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5D910C4E)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Re-enumerate components. This finilizes draft version for V1.2
2020-02-18 20:19:59 +01:00
(fp_text reference C312 (at 0 1.43) (layer B.SilkS)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(fp_text value 100n (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 53 +3.3VA))
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E3C8220)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(at 68.75 98.25 270)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5E6BF72D)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Re-enumerate components. This finilizes draft version for V1.2
2020-02-18 20:19:59 +01:00
(fp_text reference C306 (at 3.75 0 90) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(fp_text value DNP (at 0 1.43 90) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 126 "Net-(C306-Pad2)"))
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 49 "Net-(C306-Pad1)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E3C81EF)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(at 70.25 94.5 90)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5D932D1C)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Re-enumerate components. This finilizes draft version for V1.2
2020-02-18 20:19:59 +01:00
(fp_text reference C304 (at 3.5 -1 90) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(fp_text value 1u (at 0 1.43 90) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(net 2 GND))
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 61 "Net-(C304-Pad1)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E3C81DE)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(at 80.25 92.5)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5E232923)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Re-enumerate components. This finilizes draft version for V1.2
2020-02-18 20:19:59 +01:00
(fp_text reference C303 (at 0 -5) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value 100n (at 0 1.43) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 124 "Net-(C303-Pad2)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 125 "Net-(C303-Pad1)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E3C81CD)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(at 80.5 100.75)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5E292BC1)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Re-enumerate components. This finilizes draft version for V1.2
2020-02-18 20:19:59 +01:00
(fp_text reference C302 (at 0.75 -1.25) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value 100n (at 0 1.43) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 122 "Net-(C302-Pad2)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 123 "Net-(C302-Pad1)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Capacitor_SMD:C_1210_3225Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E3C81BC)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(at 65 93.5 180)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5E55CA76)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text reference C301 (at 0 2.25) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text value 10u (at 0 2.28) (layer F.Fab)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 2.28 1.58) (end -2.28 1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 -1.58) (end 2.28 1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 -1.58) (end 2.28 -1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 1.58) (end -2.28 -1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.602064 1.36) (end 0.602064 1.36) (layer F.SilkS) (width 0.12))
(fp_line (start -0.602064 -1.36) (end 0.602064 -1.36) (layer F.SilkS) (width 0.12))
(fp_line (start 1.6 1.25) (end -1.6 1.25) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 -1.25) (end 1.6 1.25) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 -1.25) (end 1.6 -1.25) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 1.25) (end -1.6 -1.25) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.8 0.8) (thickness 0.12)))
)
(pad 2 smd roundrect (at 1.4 0 180) (size 1.25 2.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(net 2 GND))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(pad 1 smd roundrect (at -1.4 0 180) (size 1.25 2.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 117 /Frontend/VREF_OP))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5E3C7F0B)
(at 77 99.25)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5E80AF62)
(attr smd)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(fp_text reference C112 (at 0 1.43 180) (layer B.SilkS)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(fp_text value 100n (at 0 -1.43 180) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0 180) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(net 2 GND))
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 53 +3.3VA))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E3D3F38)
(at 76.75 107.25)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5E82B184)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Re-enumerate components. This finilizes draft version for V1.2
2020-02-18 20:19:59 +01:00
(fp_text reference C310 (at 3.25 0) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(fp_text value DNP (at 0 1.43) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(net 2 GND))
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 127 "Net-(C309-Pad1)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Package_TO_SOT_SMD:SOT-223-3_TabPin2 (layer F.Cu) (tedit 5A02FF57) (tstamp 5E3BF082)
(at 72.75 76.25 270)
(descr "module CMS SOT223 4 pins")
(tags "CMS SOT")
(path /5E3EDECA)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text reference U105 (at 0 -4.5 90) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value AP1117-33 (at 0 4.5 90) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_line (start 1.85 -3.35) (end 1.85 3.35) (layer F.Fab) (width 0.1))
(fp_line (start -1.85 3.35) (end 1.85 3.35) (layer F.Fab) (width 0.1))
(fp_line (start -4.1 -3.41) (end 1.91 -3.41) (layer F.SilkS) (width 0.12))
(fp_line (start -0.85 -3.35) (end 1.85 -3.35) (layer F.Fab) (width 0.1))
(fp_line (start -1.85 3.41) (end 1.91 3.41) (layer F.SilkS) (width 0.12))
(fp_line (start -1.85 -2.35) (end -1.85 3.35) (layer F.Fab) (width 0.1))
(fp_line (start -1.85 -2.35) (end -0.85 -3.35) (layer F.Fab) (width 0.1))
(fp_line (start -4.4 -3.6) (end -4.4 3.6) (layer F.CrtYd) (width 0.05))
(fp_line (start -4.4 3.6) (end 4.4 3.6) (layer F.CrtYd) (width 0.05))
(fp_line (start 4.4 3.6) (end 4.4 -3.6) (layer F.CrtYd) (width 0.05))
(fp_line (start 4.4 -3.6) (end -4.4 -3.6) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.91 -3.41) (end 1.91 -2.15) (layer F.SilkS) (width 0.12))
(fp_line (start 1.91 3.41) (end 1.91 2.15) (layer F.SilkS) (width 0.12))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.8 0.8) (thickness 0.12)))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 1 smd rect (at -3.15 -2.3 270) (size 2 1.5) (layers F.Cu F.Paste F.Mask)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(net 2 GND))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 3 smd rect (at -3.15 2.3 270) (size 2 1.5) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 4 +5V))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 2 smd rect (at -3.15 0 270) (size 2 1.5) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 134 "Net-(C115-Pad1)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 2 smd rect (at 3.15 0 270) (size 2 3.8) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 134 "Net-(C115-Pad1)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-223.wrl
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3BECA8)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(at 73.75 101.75 270)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E696A10)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Re-enumerate components. This finilizes draft version for V1.2
2020-02-18 20:19:59 +01:00
(fp_text reference R316 (at 4.5 2.5 90) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(fp_text value 0 (at 0 1.43 90) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 20 /Controller/TEMP_IN))
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 66 "Net-(R314-Pad2)"))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E3BEC86)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(at 69 87.75 90)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5E5C0B2B)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Re-enumerate components. This finilizes draft version for V1.2
2020-02-18 20:19:59 +01:00
(fp_text reference R319 (at 3.25 0 90) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value 2M (at 0 1.43 90) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 11 /Frontend/SENS+))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 12 /Frontend/SENS-))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E3BE0CC)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(at 70.5 87.75 90)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(path /5D8C5188/5E656F7C)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Re-enumerate components. This finilizes draft version for V1.2
2020-02-18 20:19:59 +01:00
(fp_text reference C311 (at 3.25 0 90) (layer F.SilkS)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value 22n (at 0 1.43 90) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 11 /Frontend/SENS+))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 12 /Frontend/SENS-))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5E2E0EA8)
(at 54.75 98.5 90)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5E34D726)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(attr smd)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text reference R214 (at 0 1.43 90) (layer B.SilkS)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_text value DNP (at 0 -1.43 90) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0 90) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(net 2 GND))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 7 /Controller/VREF))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(module Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm (layer B.Cu) (tedit 5A64794F) (tstamp 5E102D21)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(at 30 18 270)
(descr "SMD Solder Jumper, 1x1.5mm Triangular Pads, 0.3mm gap, open")
(tags "solder jumper open")
(path /5E154E5C)
(attr virtual)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text reference JP104 (at 0 1.8 270) (layer B.SilkS)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text value EarthBridge (at 0 -1.9 270) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_line (start 1.65 -1.25) (end -1.65 -1.25) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.65 -1.25) (end 1.65 1.25) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.65 1.25) (end -1.65 -1.25) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.65 1.25) (end 1.65 1.25) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.4 1) (end 1.4 1) (layer B.SilkS) (width 0.12))
(fp_line (start 1.4 1) (end 1.4 -1) (layer B.SilkS) (width 0.12))
(fp_line (start 1.4 -1) (end -1.4 -1) (layer B.SilkS) (width 0.12))
(fp_line (start -1.4 -1) (end -1.4 1) (layer B.SilkS) (width 0.12))
(pad 1 smd custom (at -0.725 0 270) (size 0.3 0.3) (layers B.Cu B.Mask)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(net 1 Earth) (zone_connect 2)
(options (clearance outline) (anchor rect))
(primitives
(gr_poly (pts
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy -0.5 0.75) (xy 0.5 0.75) (xy 1 0) (xy 0.5 -0.75) (xy -0.5 -0.75)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
) (width 0))
))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(pad 2 smd custom (at 0.725 0 270) (size 0.3 0.3) (layers B.Cu B.Mask)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(net 2 GND) (zone_connect 2)
(options (clearance outline) (anchor rect))
(primitives
(gr_poly (pts
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy -0.65 0.75) (xy 0.5 0.75) (xy 0.5 -0.75) (xy -0.65 -0.75) (xy -0.15 0)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
) (width 0))
))
)
(module Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm (layer F.Cu) (tedit 5A64794F) (tstamp 5E102D13)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(at 86.5 105.5 180)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(descr "SMD Solder Jumper, 1x1.5mm Triangular Pads, 0.3mm gap, open")
(tags "solder jumper open")
(path /5E154646)
(attr virtual)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text reference JP103 (at 0 -1.8) (layer F.SilkS)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text value EarthBridge (at 0 1.9) (layer F.Fab)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.65 1.25) (end -1.65 1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.65 1.25) (end 1.65 -1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.65 -1.25) (end -1.65 1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.65 -1.25) (end 1.65 -1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.4 -1) (end 1.4 -1) (layer F.SilkS) (width 0.12))
(fp_line (start 1.4 -1) (end 1.4 1) (layer F.SilkS) (width 0.12))
(fp_line (start 1.4 1) (end -1.4 1) (layer F.SilkS) (width 0.12))
(fp_line (start -1.4 1) (end -1.4 -1) (layer F.SilkS) (width 0.12))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(pad 1 smd custom (at -0.725 0 180) (size 0.3 0.3) (layers F.Cu F.Mask)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(net 1 Earth) (zone_connect 2)
(options (clearance outline) (anchor rect))
(primitives
(gr_poly (pts
(xy -0.5 -0.75) (xy 0.5 -0.75) (xy 1 0) (xy 0.5 0.75) (xy -0.5 0.75)
) (width 0))
))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(pad 2 smd custom (at 0.725 0 180) (size 0.3 0.3) (layers F.Cu F.Mask)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(net 2 GND) (zone_connect 2)
(options (clearance outline) (anchor rect))
(primitives
(gr_poly (pts
(xy -0.65 -0.75) (xy 0.5 -0.75) (xy 0.5 0.75) (xy -0.65 0.75) (xy -0.15 0)
) (width 0))
))
)
(module Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm (layer F.Cu) (tedit 5A64794F) (tstamp 5E102D05)
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(at 38.5 109.75 90)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(descr "SMD Solder Jumper, 1x1.5mm Triangular Pads, 0.3mm gap, open")
(tags "solder jumper open")
(path /5E1491CF)
(attr virtual)
(fp_text reference JP102 (at 0 -1.8 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value EarthBridge (at 0 1.9 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.65 1.25) (end -1.65 1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.65 1.25) (end 1.65 -1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.65 -1.25) (end -1.65 1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.65 -1.25) (end 1.65 -1.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.4 -1) (end 1.4 -1) (layer F.SilkS) (width 0.12))
(fp_line (start 1.4 -1) (end 1.4 1) (layer F.SilkS) (width 0.12))
(fp_line (start 1.4 1) (end -1.4 1) (layer F.SilkS) (width 0.12))
(fp_line (start -1.4 1) (end -1.4 -1) (layer F.SilkS) (width 0.12))
(pad 1 smd custom (at -0.725 0 90) (size 0.3 0.3) (layers F.Cu F.Mask)
(net 1 Earth) (zone_connect 2)
(options (clearance outline) (anchor rect))
(primitives
(gr_poly (pts
(xy -0.5 -0.75) (xy 0.5 -0.75) (xy 1 0) (xy 0.5 0.75) (xy -0.5 0.75)
) (width 0))
))
(pad 2 smd custom (at 0.725 0 90) (size 0.3 0.3) (layers F.Cu F.Mask)
(net 2 GND) (zone_connect 2)
(options (clearance outline) (anchor rect))
(primitives
(gr_poly (pts
(xy -0.65 -0.75) (xy 0.5 -0.75) (xy 0.5 0.75) (xy -0.65 0.75) (xy -0.15 0)
) (width 0))
))
)
Finalize version v1.0
2020-01-03 21:26:29 +01:00
(module Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm (layer B.Cu) (tedit 5A64794F) (tstamp 5E102CF7)
(at 95 96 180)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(descr "SMD Solder Jumper, 1x1.5mm Triangular Pads, 0.3mm gap, open")
(tags "solder jumper open")
(path /5E168E1A)
(attr virtual)
Finalize version v1.0
2020-01-03 21:26:29 +01:00
(fp_text reference JP101 (at 0 1.8) (layer B.SilkS)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
)
Finalize version v1.0
2020-01-03 21:26:29 +01:00
(fp_text value EarthBridge (at 0 -1.9) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
)
Finalize version v1.0
2020-01-03 21:26:29 +01:00
(fp_line (start 1.65 -1.25) (end -1.65 -1.25) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.65 -1.25) (end 1.65 1.25) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.65 1.25) (end -1.65 -1.25) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.65 1.25) (end 1.65 1.25) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.4 1) (end 1.4 1) (layer B.SilkS) (width 0.12))
(fp_line (start 1.4 1) (end 1.4 -1) (layer B.SilkS) (width 0.12))
(fp_line (start 1.4 -1) (end -1.4 -1) (layer B.SilkS) (width 0.12))
(fp_line (start -1.4 -1) (end -1.4 1) (layer B.SilkS) (width 0.12))
(pad 1 smd custom (at -0.725 0 180) (size 0.3 0.3) (layers B.Cu B.Mask)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(net 1 Earth) (zone_connect 2)
(options (clearance outline) (anchor rect))
(primitives
(gr_poly (pts
Finalize version v1.0
2020-01-03 21:26:29 +01:00
(xy -0.5 0.75) (xy 0.5 0.75) (xy 1 0) (xy 0.5 -0.75) (xy -0.5 -0.75)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
) (width 0))
))
Finalize version v1.0
2020-01-03 21:26:29 +01:00
(pad 2 smd custom (at 0.725 0 180) (size 0.3 0.3) (layers B.Cu B.Mask)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(net 2 GND) (zone_connect 2)
(options (clearance outline) (anchor rect))
(primitives
(gr_poly (pts
Finalize version v1.0
2020-01-03 21:26:29 +01:00
(xy -0.65 0.75) (xy 0.5 0.75) (xy 0.5 -0.75) (xy -0.65 -0.75) (xy -0.15 0)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
) (width 0))
))
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(module Package_QFP:LQFP-100_14x14mm_P0.5mm (layer F.Cu) (tedit 5C1956D1) (tstamp 5DEF18B5)
(at 48.5 94 90)
(descr "LQFP, 100 Pin (https://www.nxp.com/docs/en/package-information/SOT407-1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py")
(tags "LQFP QFP")
(path /5D77EC9D/5D78060E)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference U202 (at 0 -9.42 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value STM32F407VETx (at 0 9.42 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 6.41 7.11) (end 7.11 7.11) (layer F.SilkS) (width 0.12))
(fp_line (start 7.11 7.11) (end 7.11 6.41) (layer F.SilkS) (width 0.12))
(fp_line (start -6.41 7.11) (end -7.11 7.11) (layer F.SilkS) (width 0.12))
(fp_line (start -7.11 7.11) (end -7.11 6.41) (layer F.SilkS) (width 0.12))
(fp_line (start 6.41 -7.11) (end 7.11 -7.11) (layer F.SilkS) (width 0.12))
(fp_line (start 7.11 -7.11) (end 7.11 -6.41) (layer F.SilkS) (width 0.12))
(fp_line (start -6.41 -7.11) (end -7.11 -7.11) (layer F.SilkS) (width 0.12))
(fp_line (start -7.11 -7.11) (end -7.11 -6.41) (layer F.SilkS) (width 0.12))
(fp_line (start -7.11 -6.41) (end -8.475 -6.41) (layer F.SilkS) (width 0.12))
(fp_line (start -6 -7) (end 7 -7) (layer F.Fab) (width 0.1))
(fp_line (start 7 -7) (end 7 7) (layer F.Fab) (width 0.1))
(fp_line (start 7 7) (end -7 7) (layer F.Fab) (width 0.1))
(fp_line (start -7 7) (end -7 -6) (layer F.Fab) (width 0.1))
(fp_line (start -7 -6) (end -6 -7) (layer F.Fab) (width 0.1))
(fp_line (start 0 -8.72) (end -6.4 -8.72) (layer F.CrtYd) (width 0.05))
(fp_line (start -6.4 -8.72) (end -6.4 -7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -6.4 -7.25) (end -7.25 -7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -7.25 -7.25) (end -7.25 -6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start -7.25 -6.4) (end -8.72 -6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start -8.72 -6.4) (end -8.72 0) (layer F.CrtYd) (width 0.05))
(fp_line (start 0 -8.72) (end 6.4 -8.72) (layer F.CrtYd) (width 0.05))
(fp_line (start 6.4 -8.72) (end 6.4 -7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 6.4 -7.25) (end 7.25 -7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 7.25 -7.25) (end 7.25 -6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start 7.25 -6.4) (end 8.72 -6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start 8.72 -6.4) (end 8.72 0) (layer F.CrtYd) (width 0.05))
(fp_line (start 0 8.72) (end -6.4 8.72) (layer F.CrtYd) (width 0.05))
(fp_line (start -6.4 8.72) (end -6.4 7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -6.4 7.25) (end -7.25 7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -7.25 7.25) (end -7.25 6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start -7.25 6.4) (end -8.72 6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start -8.72 6.4) (end -8.72 0) (layer F.CrtYd) (width 0.05))
(fp_line (start 0 8.72) (end 6.4 8.72) (layer F.CrtYd) (width 0.05))
(fp_line (start 6.4 8.72) (end 6.4 7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 6.4 7.25) (end 7.25 7.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 7.25 7.25) (end 7.25 6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start 7.25 6.4) (end 8.72 6.4) (layer F.CrtYd) (width 0.05))
(fp_line (start 8.72 6.4) (end 8.72 0) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 smd roundrect (at -7.675 -6 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 54 /Controller/NSS))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at -7.675 -5.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 75 "Net-(U202-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 smd roundrect (at -7.675 -5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 76 "Net-(U202-Pad3)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 4 smd roundrect (at -7.675 -4.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 77 "Net-(U202-Pad4)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 5 smd roundrect (at -7.675 -4 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 78 "Net-(U202-Pad5)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 6 smd roundrect (at -7.675 -3.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 7 smd roundrect (at -7.675 -3 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 79 "Net-(U202-Pad7)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 8 smd roundrect (at -7.675 -2.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 80 "Net-(U202-Pad8)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 9 smd roundrect (at -7.675 -2 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 81 "Net-(U202-Pad9)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 10 smd roundrect (at -7.675 -1.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 11 smd roundrect (at -7.675 -1 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 12 smd roundrect (at -7.675 -0.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 57 "Net-(C206-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 13 smd roundrect (at -7.675 0 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 58 "Net-(C207-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 14 smd roundrect (at -7.675 0.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 32 /Controller/~RST))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 15 smd roundrect (at -7.675 1 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 82 "Net-(U202-Pad15)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 16 smd roundrect (at -7.675 1.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 83 "Net-(U202-Pad16)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 17 smd roundrect (at -7.675 2 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 84 "Net-(U202-Pad17)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 18 smd roundrect (at -7.675 2.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 85 "Net-(U202-Pad18)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 19 smd roundrect (at -7.675 3 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 20 smd roundrect (at -7.675 3.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 21 smd roundrect (at -7.675 4 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 7 /Controller/VREF))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 22 smd roundrect (at -7.675 4.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 45 /Controller/VDDA))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 23 smd roundrect (at -7.675 5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 5 /Controller/ENC1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 24 smd roundrect (at -7.675 5.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 6 /Controller/ENC2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 25 smd roundrect (at -7.675 6 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 20 /Controller/TEMP_IN))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 26 smd roundrect (at -6 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 86 "Net-(U202-Pad26)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 27 smd roundrect (at -5.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 28 smd roundrect (at -5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 29 smd roundrect (at -4.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 87 "Net-(U202-Pad29)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 30 smd roundrect (at -4 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 55 /Controller/SCK))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 31 smd roundrect (at -3.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 56 /Controller/MISO))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 32 smd roundrect (at -3 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 88 "Net-(U202-Pad32)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 33 smd roundrect (at -2.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 89 "Net-(U202-Pad33)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 34 smd roundrect (at -2 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 90 "Net-(U202-Pad34)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 35 smd roundrect (at -1.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 41 /OUT0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 36 smd roundrect (at -1 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 44 /OUT1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 37 smd roundrect (at -0.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 43 /OUT2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 38 smd roundrect (at 0 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 91 "Net-(U202-Pad38)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 39 smd roundrect (at 0.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 92 "Net-(U202-Pad39)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 40 smd roundrect (at 1 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 93 "Net-(U202-Pad40)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 41 smd roundrect (at 1.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 94 "Net-(U202-Pad41)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 42 smd roundrect (at 2 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 95 "Net-(U202-Pad42)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 43 smd roundrect (at 2.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 96 "Net-(U202-Pad43)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 44 smd roundrect (at 3 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 97 "Net-(U202-Pad44)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 45 smd roundrect (at 3.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 98 "Net-(U202-Pad45)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 46 smd roundrect (at 4 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 99 "Net-(U202-Pad46)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 47 smd roundrect (at 4.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 135 "Net-(U202-Pad47)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 48 smd roundrect (at 5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 136 "Net-(U202-Pad48)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 49 smd roundrect (at 5.5 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 59 "Net-(C211-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 50 smd roundrect (at 6 7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 51 smd roundrect (at 7.675 6 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 129 /Controller/~CS~_EEPROM))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 52 smd roundrect (at 7.675 5.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 130 /Controller/SPI2_SCK))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 53 smd roundrect (at 7.675 5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 131 /Controller/SPI2_MISO))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 54 smd roundrect (at 7.675 4.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 132 /Controller/SPI2_MOSI))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 55 smd roundrect (at 7.675 4 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 69 "Net-(U201-Pad6)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 56 smd roundrect (at 7.675 3.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 71 "Net-(U201-Pad8)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 57 smd roundrect (at 7.675 3 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 74 "Net-(U201-Pad17)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 58 smd roundrect (at 7.675 2.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 73 "Net-(U201-Pad15)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 59 smd roundrect (at 7.675 2 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 100 "Net-(U202-Pad59)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 60 smd roundrect (at 7.675 1.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 101 "Net-(U202-Pad60)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 61 smd roundrect (at 7.675 1 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 102 "Net-(U202-Pad61)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 62 smd roundrect (at 7.675 0.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 103 "Net-(U202-Pad62)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 63 smd roundrect (at 7.675 0 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 104 "Net-(U202-Pad63)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 64 smd roundrect (at 7.675 -0.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 105 "Net-(U202-Pad64)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 65 smd roundrect (at 7.675 -1 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 14 /Controller/SDIO_D0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 66 smd roundrect (at 7.675 -1.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 13 /Controller/SDIO_D1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 67 smd roundrect (at 7.675 -2 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 47 /Controller/CARD_DETECT))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 68 smd roundrect (at 7.675 -2.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 30 /Controller/PC_RX))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 69 smd roundrect (at 7.675 -3 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 31 /Controller/PC_TX))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 70 smd roundrect (at 7.675 -3.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 106 "Net-(U202-Pad70)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 71 smd roundrect (at 7.675 -4 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 107 "Net-(U202-Pad71)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 72 smd roundrect (at 7.675 -4.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 28 /Controller/SWDIO))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 73 smd roundrect (at 7.675 -5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 60 "Net-(C213-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 74 smd roundrect (at 7.675 -5.5 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 75 smd roundrect (at 7.675 -6 90) (size 1.6 0.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 76 smd roundrect (at 6 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 29 /Controller/SWCLK))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 77 smd roundrect (at 5.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 108 "Net-(U202-Pad77)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 78 smd roundrect (at 5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 18 /Controller/SDIO_D2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 79 smd roundrect (at 4.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 17 /Controller/SDIO_D3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 80 smd roundrect (at 4 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 15 /Controller/SDIO_CLK))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 81 smd roundrect (at 3.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 109 "Net-(U202-Pad81)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 82 smd roundrect (at 3 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 110 "Net-(U202-Pad82)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 83 smd roundrect (at 2.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 16 /Controller/SDIO_CMD))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 84 smd roundrect (at 2 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 111 "Net-(U202-Pad84)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 85 smd roundrect (at 1.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 8 /Controller/SW1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 86 smd roundrect (at 1 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 112 "Net-(U202-Pad86)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 87 smd roundrect (at 0.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 67 "Net-(U201-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 88 smd roundrect (at 0 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 68 "Net-(U201-Pad4)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 89 smd roundrect (at -0.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 42 /OUT3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 90 smd roundrect (at -1 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 118 /DIGIO0_PROT))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 91 smd roundrect (at -1.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 119 /DIGIO1_PROT))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 92 smd roundrect (at -2 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 120 /DIGIO2_PROT))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 93 smd roundrect (at -2.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 121 /DIGIO3_PROT))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 94 smd roundrect (at -3 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 95 smd roundrect (at -3.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 113 "Net-(U202-Pad95)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 96 smd roundrect (at -4 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 114 "Net-(U202-Pad96)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 97 smd roundrect (at -4.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 115 "Net-(U202-Pad97)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 98 smd roundrect (at -5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 116 "Net-(U202-Pad98)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 99 smd roundrect (at -5.5 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 100 smd roundrect (at -6 -7.675 90) (size 0.3 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Package_QFP.3dshapes/LQFP-100_14x14mm_P0.5mm.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Connector_Multicomp:Multicomp_MC9A12-1034_2x05_P2.54mm_Vertical (layer F.Cu) (tedit 5E0DF17F) (tstamp 5E016EF0)
(at 62.5 61 180)
(descr http://www.farnell.com/datasheets/1520732.pdf)
(tags "connector multicomp MC9A MC9A12")
(path /5D77EC9D/5E102471)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference J201 (at 5.5 4 180) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value LCD (at 5.08 5 180) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -5.07 3.2) (end -5.07 -5.74) (layer F.SilkS) (width 0.15))
(fp_line (start -5.07 -5.74) (end 15.23 -5.74) (layer F.SilkS) (width 0.15))
(fp_line (start 15.23 -5.74) (end 15.23 3.2) (layer F.SilkS) (width 0.15))
(fp_line (start 15.23 3.2) (end -5.07 3.2) (layer F.SilkS) (width 0.15))
(fp_line (start 2.855 3.2) (end 2.855 1.9) (layer F.SilkS) (width 0.15))
(fp_line (start 2.855 1.9) (end -3.87 1.9) (layer F.SilkS) (width 0.15))
(fp_line (start -3.87 1.9) (end -3.87 -4.44) (layer F.SilkS) (width 0.15))
(fp_line (start -3.87 -4.44) (end 14.03 -4.44) (layer F.SilkS) (width 0.15))
(fp_line (start 14.03 -4.44) (end 14.03 1.9) (layer F.SilkS) (width 0.15))
(fp_line (start 14.03 1.9) (end 7.305 1.9) (layer F.SilkS) (width 0.15))
(fp_line (start 7.305 1.9) (end 7.305 3.2) (layer F.SilkS) (width 0.15))
(fp_line (start 4.83 -5.74) (end 4.83 -5.94) (layer F.SilkS) (width 0.15))
(fp_line (start 4.83 -5.94) (end 5.33 -5.94) (layer F.SilkS) (width 0.15))
(fp_line (start 5.33 -5.94) (end 5.33 -5.74) (layer F.SilkS) (width 0.15))
(fp_line (start 4.83 -5.84) (end 5.33 -5.84) (layer F.SilkS) (width 0.15))
(fp_line (start 12.31 -5.74) (end 12.31 -5.94) (layer F.SilkS) (width 0.15))
(fp_line (start 12.31 -5.94) (end 12.81 -5.94) (layer F.SilkS) (width 0.15))
(fp_line (start 12.81 -5.94) (end 12.81 -5.74) (layer F.SilkS) (width 0.15))
(fp_line (start 12.31 -5.84) (end 12.81 -5.84) (layer F.SilkS) (width 0.15))
(fp_line (start -2.65 -5.74) (end -2.65 -5.94) (layer F.SilkS) (width 0.15))
(fp_line (start -2.65 -5.94) (end -2.15 -5.94) (layer F.SilkS) (width 0.15))
(fp_line (start -2.15 -5.94) (end -2.15 -5.74) (layer F.SilkS) (width 0.15))
(fp_line (start -2.65 -5.84) (end -2.15 -5.84) (layer F.SilkS) (width 0.15))
(fp_line (start -2.2 0.6) (end -2.2 -0.6) (layer F.SilkS) (width 0.15))
(fp_line (start -2.2 -0.6) (end -1.6 0) (layer F.SilkS) (width 0.15))
(fp_line (start -1.6 0) (end -2.2 0.6) (layer F.SilkS) (width 0.15))
(fp_line (start -5.55 3.7) (end -5.55 -6.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -5.55 -6.25) (end 15.75 -6.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 15.75 -6.25) (end 15.75 3.7) (layer F.CrtYd) (width 0.05))
(fp_line (start 15.75 3.7) (end -5.55 3.7) (layer F.CrtYd) (width 0.05))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 5.08 -1.27 180) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 thru_hole rect (at 0 0 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(pad 2 thru_hole circle (at 0 -2.54 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(pad 3 thru_hole circle (at 2.54 0 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 46 +5VL))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 4 thru_hole circle (at 2.54 -2.54 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 35 /Controller/LCD_RS))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 5 thru_hole circle (at 5.08 0 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 34 /Controller/LCD_VO))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 6 thru_hole circle (at 5.08 -2.54 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 36 /Controller/LCD_EN))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 7 thru_hole circle (at 7.62 0 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 37 /Controller/LCD_D3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 8 thru_hole circle (at 7.62 -2.54 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 38 /Controller/LCD_D0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 9 thru_hole circle (at 10.16 0 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 39 /Controller/LCD_D2))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(pad 10 thru_hole circle (at 10.16 -2.54 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 40 /Controller/LCD_D1))
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(model ${KISYS3DMOD}/Connector_Multicomp.3dshapes/Multicomp_MC9A12-1034_2x05_P2.54mm_Vertical.wrl
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(model ${SHIMATTA_DIR}/footprints/packages3d/tht.shapes3d/Pin_Header_Socket_2x05.x3d
(offset (xyz 5.08 1.27 0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF174C)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(at 73.75 105 90)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
Replace all MCP6V31U with MCP6V34. It's cheaper.
2020-02-06 19:49:54 +01:00
(path /5D8C5188/5DB0C2DA)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(attr smd)
Re-enumerate components. This finilizes draft version for V1.2
2020-02-18 20:19:59 +01:00
(fp_text reference R318 (at -3.25 0 270) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(fp_text value 680 (at 0 1.43 270) (layer F.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(fp_text user %R (at 0 0 270) (layer F.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 127 "Net-(C309-Pad1)"))
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 20 /Controller/TEMP_IN))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_1206_3216Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF0E11)
(at 26.5 20.5 90)
(descr "Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D708E87)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C113 (at 0 -1.82 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n/1kV (at 0 1.82 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 2.28 1.12) (end -2.28 1.12) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 -1.12) (end 2.28 1.12) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 -1.12) (end 2.28 -1.12) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 1.12) (end -2.28 -1.12) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12))
(fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12))
(fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.8 0.8) (thickness 0.12)))
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 1.4 0 90) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 1 Earth))
(pad 1 smd roundrect (at -1.4 0 90) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_1206_3216Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_1206_3216Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF0E22)
(at 85.5 102.5)
(descr "Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D707F91)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C114 (at 0 -1.82) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n/1kV (at 0 1.82) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1))
(fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12))
(fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12))
(fp_line (start -2.28 1.12) (end -2.28 -1.12) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 -1.12) (end 2.28 -1.12) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 -1.12) (end 2.28 1.12) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 1.12) (end -2.28 1.12) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.8 0.8) (thickness 0.12)))
)
(pad 1 smd roundrect (at -1.4 0) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 2 GND))
(pad 2 smd roundrect (at 1.4 0) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 1 Earth))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_1206_3216Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5DEF0F85)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(at 43.5 49.5 270)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D71F258)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference C106 (at -1.59 1.71 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.65 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1))
(fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1))
(fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1))
(fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1))
(fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12))
(fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12))
(fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)))
)
(pad 1 smd roundrect (at -0.9375 0 270) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 46 +5VL))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.9375 0 270) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF0FA7)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(at 29.5 49.25 180)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D722F9B)
(attr smd)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text reference C108 (at 0.22 1.81) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text value 100n (at 0 1.43) (layer F.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer F.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 3 +3V3))
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_Elec_5x5.4 (layer F.Cu) (tedit 5BC8D926) (tstamp 5DEF0FCB)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(at 25 42)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(descr "SMD capacitor, aluminum electrolytic nonpolar, 5.0x5.4mm")
(tags "capacitor electrolyic nonpolar")
(path /5D9883BA)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference C109 (at 0 -3.7) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10u (at 0 3.7) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -3.7 1.05) (end -2.9 1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -3.7 -1.05) (end -3.7 1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.9 -1.05) (end -3.7 -1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.9 1.05) (end -2.9 1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.9 -1.75) (end -2.9 -1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.9 -1.75) (end -1.75 -2.9) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.9 1.75) (end -1.75 2.9) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.75 -2.9) (end 2.9 -2.9) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.75 2.9) (end 2.9 2.9) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.9 1.05) (end 2.9 2.9) (layer F.CrtYd) (width 0.05))
(fp_line (start 3.7 1.05) (end 2.9 1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 3.7 -1.05) (end 3.7 1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.9 -1.05) (end 3.7 -1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.9 -2.9) (end 2.9 -1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.76 1.695563) (end -1.695563 2.76) (layer F.SilkS) (width 0.12))
(fp_line (start -2.76 -1.695563) (end -1.695563 -2.76) (layer F.SilkS) (width 0.12))
(fp_line (start -2.76 -1.695563) (end -2.76 -1.06) (layer F.SilkS) (width 0.12))
(fp_line (start -2.76 1.695563) (end -2.76 1.06) (layer F.SilkS) (width 0.12))
(fp_line (start -1.695563 2.76) (end 2.76 2.76) (layer F.SilkS) (width 0.12))
(fp_line (start -1.695563 -2.76) (end 2.76 -2.76) (layer F.SilkS) (width 0.12))
(fp_line (start 2.76 -2.76) (end 2.76 -1.06) (layer F.SilkS) (width 0.12))
(fp_line (start 2.76 2.76) (end 2.76 1.06) (layer F.SilkS) (width 0.12))
(fp_line (start -2.65 1.65) (end -1.65 2.65) (layer F.Fab) (width 0.1))
(fp_line (start -2.65 -1.65) (end -1.65 -2.65) (layer F.Fab) (width 0.1))
(fp_line (start -2.65 -1.65) (end -2.65 1.65) (layer F.Fab) (width 0.1))
(fp_line (start -1.65 2.65) (end 2.65 2.65) (layer F.Fab) (width 0.1))
(fp_line (start -1.65 -2.65) (end 2.65 -2.65) (layer F.Fab) (width 0.1))
(fp_line (start 2.65 -2.65) (end 2.65 2.65) (layer F.Fab) (width 0.1))
(fp_circle (center 0 0) (end 2.5 0) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 2 smd roundrect (at 2.0625 0) (size 2.775 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.15625)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(net 2 GND))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(pad 1 smd roundrect (at -2.0625 0) (size 2.775 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.15625)
(net 46 +5VL))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_Elec_5x5.4.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_Elec_5x5.4 (layer F.Cu) (tedit 5BC8D926) (tstamp 5DEF0FEF)
(at 39.5 58)
(descr "SMD capacitor, aluminum electrolytic nonpolar, 5.0x5.4mm")
(tags "capacitor electrolyic nonpolar")
(path /5D7289BD)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference C110 (at 1.54 -3.71) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10u (at 0 3.7) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_circle (center 0 0) (end 2.5 0) (layer F.Fab) (width 0.1))
(fp_line (start 2.65 -2.65) (end 2.65 2.65) (layer F.Fab) (width 0.1))
(fp_line (start -1.65 -2.65) (end 2.65 -2.65) (layer F.Fab) (width 0.1))
(fp_line (start -1.65 2.65) (end 2.65 2.65) (layer F.Fab) (width 0.1))
(fp_line (start -2.65 -1.65) (end -2.65 1.65) (layer F.Fab) (width 0.1))
(fp_line (start -2.65 -1.65) (end -1.65 -2.65) (layer F.Fab) (width 0.1))
(fp_line (start -2.65 1.65) (end -1.65 2.65) (layer F.Fab) (width 0.1))
(fp_line (start 2.76 2.76) (end 2.76 1.06) (layer F.SilkS) (width 0.12))
(fp_line (start 2.76 -2.76) (end 2.76 -1.06) (layer F.SilkS) (width 0.12))
(fp_line (start -1.695563 -2.76) (end 2.76 -2.76) (layer F.SilkS) (width 0.12))
(fp_line (start -1.695563 2.76) (end 2.76 2.76) (layer F.SilkS) (width 0.12))
(fp_line (start -2.76 1.695563) (end -2.76 1.06) (layer F.SilkS) (width 0.12))
(fp_line (start -2.76 -1.695563) (end -2.76 -1.06) (layer F.SilkS) (width 0.12))
(fp_line (start -2.76 -1.695563) (end -1.695563 -2.76) (layer F.SilkS) (width 0.12))
(fp_line (start -2.76 1.695563) (end -1.695563 2.76) (layer F.SilkS) (width 0.12))
(fp_line (start 2.9 -2.9) (end 2.9 -1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.9 -1.05) (end 3.7 -1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 3.7 -1.05) (end 3.7 1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 3.7 1.05) (end 2.9 1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.9 1.05) (end 2.9 2.9) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.75 2.9) (end 2.9 2.9) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.75 -2.9) (end 2.9 -2.9) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.9 1.75) (end -1.75 2.9) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.9 -1.75) (end -1.75 -2.9) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.9 -1.75) (end -2.9 -1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.9 1.05) (end -2.9 1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.9 -1.05) (end -3.7 -1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -3.7 -1.05) (end -3.7 1.05) (layer F.CrtYd) (width 0.05))
(fp_line (start -3.7 1.05) (end -2.9 1.05) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 smd roundrect (at -2.0625 0) (size 2.775 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.15625)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 2.0625 0) (size 2.775 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.15625)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_Elec_5x5.4.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_1206_3216Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1000)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(at 73 69.5)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(descr "Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D99DEEA)
(attr smd)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text reference C111 (at 0 1.5) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text value 1u (at 0 1.82) (layer F.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1))
(fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12))
(fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12))
(fp_line (start -2.28 1.12) (end -2.28 -1.12) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 -1.12) (end 2.28 -1.12) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 -1.12) (end 2.28 1.12) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 1.12) (end -2.28 1.12) (layer F.CrtYd) (width 0.05))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer F.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 0.8 0.8) (thickness 0.12)))
)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(pad 1 smd roundrect (at -1.4 0) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 4 +5V))
(pad 2 smd roundrect (at 1.4 0) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_1206_3216Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_1210_3225Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1011)
(at 93 77.5 180)
(descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8DCE92)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference C103 (at 0 2.5) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10u (at 0 2.28) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 2.28 1.58) (end -2.28 1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 -1.58) (end 2.28 1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 -1.58) (end 2.28 -1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 1.58) (end -2.28 -1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.602064 1.36) (end 0.602064 1.36) (layer F.SilkS) (width 0.12))
(fp_line (start -0.602064 -1.36) (end 0.602064 -1.36) (layer F.SilkS) (width 0.12))
(fp_line (start 1.6 1.25) (end -1.6 1.25) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 -1.25) (end 1.6 1.25) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 -1.25) (end 1.6 -1.25) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 1.25) (end -1.6 -1.25) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.8 0.8) (thickness 0.12)))
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 1.4 0 180) (size 1.25 2.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 46 +5VL))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -1.4 0 180) (size 1.25 2.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5E01D917)
(at 85.5 96)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5DF4E0DE)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference C102 (at 3.47 0.1) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 22n (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 48 "Net-(C102-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 41 /OUT0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1033)
(at 41.64 105.61 270)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D793BDA)
(attr smd)
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(fp_text reference C201 (at 4.14 0.14 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1044)
(at 44.5 105.5 90)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D8447D5)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C206 (at 0 -1.43 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 12p (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 57 "Net-(C206-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1055)
(at 52.5 105.5 270)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D841383)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C207 (at 3.5 0 270) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 12p (at 0 1.43 270) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0 270) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 58 "Net-(C207-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1066)
(at 32 72.5 180)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5DC2C880)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C209 (at 0 10.5) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1077)
(at 59 88.5)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D7A7211)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C211 (at 0.5 1.5) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 2u2 (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 59 "Net-(C211-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1088)
(at 50 80.5 270)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D9BD104)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C212 (at 0 1.5 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 46 +5VL))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1099)
(at 42.7125 83.5 180)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D7A8470)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C213 (at -3.2875 0) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 2u2 (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 60 "Net-(C213-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5DEF10AA)
(at 57.17 102.03)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D7C8AA8)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C214 (at 0 1.43) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 100n (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 45 /Controller/VDDA))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF10BB)
(at 61 101)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D7C724B)
(attr smd)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(fp_text reference C216 (at 2 -2) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 1u (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 45 /Controller/VDDA))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5E496052)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(at 30 95.5 180)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D7EAB78)
(attr smd)
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(fp_text reference C217 (at 0.25 -1.75) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 100n (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 5 /Controller/ENC1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5DEF10DD)
(at 30 100.5 180)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D7EB430)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C218 (at 0.5 1.5) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 100n (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 6 /Controller/ENC2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5DEF10FF)
(at 35.5 93)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D82D697)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C219 (at 0 1.43) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 100n (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 8 /Controller/SW1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1110)
(at 59.5 99)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D77625F)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C204 (at 0 -1.43) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1121)
(at 59 86.5)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D771354)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C205 (at 0 -1.5) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1132)
(at 38.5 99.5 90)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D775CE6)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C208 (at 0 -1.43 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100n (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_1210_3225Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1143)
(at 37 83.5 270)
(descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5D8142D7)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C210 (at 0 -2.28 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10u (at 0 2.28 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -1.6 1.25) (end -1.6 -1.25) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 -1.25) (end 1.6 -1.25) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 -1.25) (end 1.6 1.25) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 1.25) (end -1.6 1.25) (layer F.Fab) (width 0.1))
(fp_line (start -0.602064 -1.36) (end 0.602064 -1.36) (layer F.SilkS) (width 0.12))
(fp_line (start -0.602064 1.36) (end 0.602064 1.36) (layer F.SilkS) (width 0.12))
(fp_line (start -2.28 1.58) (end -2.28 -1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 -1.58) (end 2.28 -1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 -1.58) (end 2.28 1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 1.58) (end -2.28 1.58) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.8 0.8) (thickness 0.12)))
)
(pad 1 smd roundrect (at -1.4 0 270) (size 1.25 2.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 1.4 0 270) (size 1.25 2.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5DEF1187)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(at 53.5 101.5 180)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5D9BF43F)
(attr smd)
Re-enumerate components. This finilizes draft version for V1.2
2020-02-18 20:19:59 +01:00
(fp_text reference C305 (at 3.5 0) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(fp_text value 1u (at 0 -1.43) (layer B.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 7 /Controller/VREF))
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5DEF11DC)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(at 70.5 87.75 270)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5D918057)
(attr smd)
Re-enumerate components. This finilizes draft version for V1.2
2020-02-18 20:19:59 +01:00
(fp_text reference C307 (at -3.5 0 90) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(fp_text value 22n (at 0 -1.43 90) (layer B.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 9 /Frontend/FORCE+))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 10 /Frontend/FORCE-))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_1210_3225Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1220)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(at 80.75 76.75 90)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5D8F201B)
(attr smd)
Re-enumerate components. This finilizes draft version for V1.2
2020-02-18 20:19:59 +01:00
(fp_text reference C313 (at 0 -2.28 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(fp_text value DNP (at 0 2.28 90) (layer F.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -1.6 1.25) (end -1.6 -1.25) (layer F.Fab) (width 0.1))
(fp_line (start -1.6 -1.25) (end 1.6 -1.25) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 -1.25) (end 1.6 1.25) (layer F.Fab) (width 0.1))
(fp_line (start 1.6 1.25) (end -1.6 1.25) (layer F.Fab) (width 0.1))
(fp_line (start -0.602064 -1.36) (end 0.602064 -1.36) (layer F.SilkS) (width 0.12))
(fp_line (start -0.602064 1.36) (end 0.602064 1.36) (layer F.SilkS) (width 0.12))
(fp_line (start -2.28 1.58) (end -2.28 -1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.28 -1.58) (end 2.28 -1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 -1.58) (end 2.28 1.58) (layer F.CrtYd) (width 0.05))
(fp_line (start 2.28 1.58) (end -2.28 1.58) (layer F.CrtYd) (width 0.05))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(fp_text user %R (at 0 0 90) (layer F.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 0.8 0.8) (thickness 0.12)))
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(pad 1 smd roundrect (at -1.4 0 90) (size 1.25 2.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 53 +3.3VA))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(pad 2 smd roundrect (at 1.4 0 90) (size 1.25 2.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module LED_SMD:LED_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF125D)
(at 25 56)
(descr "LED SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags diode)
(path /5D8E4FA2)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference D103 (at 1.65 1.66) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value LED (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.485 0.735) (end 0.8 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -1.485 -0.735) (end -1.485 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 -0.735) (end -1.485 -0.735) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.1) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.5 -0.4) (end -0.8 -0.1) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.5 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 42 /OUT3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 50 "Net-(D103-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/LED_SMD.3dshapes/LED_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module LED_SMD:LED_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF1270)
(at 25 52)
(descr "LED SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags diode)
(path /5D8E4A3B)
(attr smd)
(fp_text reference D102 (at 4.55 -0.91) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value LED (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 0.8 -0.4) (end -0.5 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.5 -0.4) (end -0.8 -0.1) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.1) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.735) (end -1.485 -0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -1.485 -0.735) (end -1.485 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -1.485 0.735) (end 0.8 0.735) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 19 "Net-(D102-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 43 /OUT2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/LED_SMD.3dshapes/LED_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(module shimatta_tht:Schurter_0031.8201_20mm_Fuse (layer F.Cu) (tedit 5D6EB5E7) (tstamp 5EC249CB)
(at 91 56.5 90)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(path /5D6ED850)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference F101 (at -14.5 0 180) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100mA/slow (at 0 -0.5 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -11.25 -2) (end -11.25 -5.5) (layer F.SilkS) (width 0.15))
(fp_line (start -11.25 -5.5) (end 11.25 -5.5) (layer F.SilkS) (width 0.15))
(fp_line (start 11.25 -5.5) (end 11.25 -2) (layer F.SilkS) (width 0.15))
(fp_line (start -11.25 2) (end -11.25 5.5) (layer F.SilkS) (width 0.15))
(fp_line (start -11.25 5.5) (end 11.25 5.5) (layer F.SilkS) (width 0.15))
(fp_line (start 11.25 5.5) (end 11.25 2) (layer F.SilkS) (width 0.15))
(pad 1 thru_hole circle (at -11.25 0 90) (size 3 3) (drill 1.3) (layers *.Cu *.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 21 /L_Trafo))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 thru_hole circle (at 11.25 0 90) (size 3 3) (drill 1.3) (layers *.Cu *.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 22 /L_IN))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
(module Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder (layer F.Cu) (tedit 5B301BBE) (tstamp 5DEF12C3)
(at 73 64 90)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags "inductor handsolder")
(path /5D99D868)
(attr smd)
(fp_text reference FB101 (at 0 -1.43 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value "600 Ohm" (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.171267 -0.51) (end 0.171267 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.171267 0.51) (end 0.171267 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.65 0.73) (end -1.65 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.65 -0.73) (end 1.65 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.65 -0.73) (end 1.65 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.65 0.73) (end -1.65 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.875 0 90) (size 1.05 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 4 +5V))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.875 0 90) (size 1.05 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 46 +5VL))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Inductor_SMD.3dshapes/L_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module MountingHole:MountingHole_3.2mm_M3_Pad_Via (layer F.Cu) (tedit 56DDBCCA) (tstamp 5DEF1303)
(at 91.5 102.5)
(descr "Mounting Hole 3.2mm, M3")
(tags "mounting hole 3.2mm m3")
(path /5D9DB41E)
(attr virtual)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference H101 (at 0 -4.2) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value M3 (at 0 4.2) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_circle (center 0 0) (end 3.2 0) (layer Cmts.User) (width 0.15))
(fp_circle (center 0 0) (end 3.45 0) (layer F.CrtYd) (width 0.05))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(fp_text user %R (at 0.3 0) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 thru_hole circle (at 0 0) (size 6.4 6.4) (drill 3.2) (layers *.Cu *.Mask)
(net 1 Earth))
(pad 1 thru_hole circle (at 2.4 0) (size 0.8 0.8) (drill 0.5) (layers *.Cu *.Mask)
(net 1 Earth))
(pad 1 thru_hole circle (at 1.697056 1.697056) (size 0.8 0.8) (drill 0.5) (layers *.Cu *.Mask)
(net 1 Earth))
(pad 1 thru_hole circle (at 0 2.4) (size 0.8 0.8) (drill 0.5) (layers *.Cu *.Mask)
(net 1 Earth))
(pad 1 thru_hole circle (at -1.697056 1.697056) (size 0.8 0.8) (drill 0.5) (layers *.Cu *.Mask)
(net 1 Earth))
(pad 1 thru_hole circle (at -2.4 0) (size 0.8 0.8) (drill 0.5) (layers *.Cu *.Mask)
(net 1 Earth))
(pad 1 thru_hole circle (at -1.697056 -1.697056) (size 0.8 0.8) (drill 0.5) (layers *.Cu *.Mask)
(net 1 Earth))
(pad 1 thru_hole circle (at 0 -2.4) (size 0.8 0.8) (drill 0.5) (layers *.Cu *.Mask)
(net 1 Earth))
(pad 1 thru_hole circle (at 1.697056 -1.697056) (size 0.8 0.8) (drill 0.5) (layers *.Cu *.Mask)
(net 1 Earth))
)
(module TerminalBlock:TerminalBlock_Altech_AK300-3_P5.00mm (layer F.Cu) (tedit 59FF0306) (tstamp 5DEF46B9)
(at 91.5 93 90)
(descr "Altech AK300 terminal block, pitch 5.0mm, 45 degree angled, see http://www.mouser.com/ds/2/16/PCBMETRC-24178.pdf")
(tags "Altech AK300 terminal block pitch 5.0mm")
(path /5D8B2F0A)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference J103 (at 5 -7.1 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value SSR_OUT (at 4.95 7.3 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -2.65 -6.3) (end -2.65 6.3) (layer F.SilkS) (width 0.12))
(fp_line (start -2.65 6.3) (end 12.75 6.3) (layer F.SilkS) (width 0.12))
(fp_line (start 12.75 6.3) (end 12.75 5.35) (layer F.SilkS) (width 0.12))
(fp_line (start 12.75 5.35) (end 13.25 5.65) (layer F.SilkS) (width 0.12))
(fp_line (start 13.25 5.65) (end 13.25 3.65) (layer F.SilkS) (width 0.12))
(fp_line (start 13.25 3.65) (end 12.75 3.9) (layer F.SilkS) (width 0.12))
(fp_line (start 12.75 3.9) (end 12.75 -1.5) (layer F.SilkS) (width 0.12))
(fp_line (start 12.75 -1.5) (end 13.25 -1.25) (layer F.SilkS) (width 0.12))
(fp_line (start 13.25 -1.25) (end 13.25 -6.3) (layer F.SilkS) (width 0.12))
(fp_line (start 13.25 -6.3) (end -2.65 -6.3) (layer F.SilkS) (width 0.12))
(fp_line (start 12.66 -0.65) (end -2.52 -0.65) (layer F.Fab) (width 0.1))
(fp_line (start 8.02 3.99) (end 8.02 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 12.09 6.21) (end 7.58 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 7.58 -3.19) (end 12.6 -3.19) (layer F.Fab) (width 0.1))
(fp_line (start -2.58 -6.23) (end 12.66 -6.23) (layer F.Fab) (width 0.1))
(fp_line (start 8.42 -0.26) (end 11.72 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 8.04 -0.26) (end 8.42 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 12.1 -0.26) (end 11.72 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 8.57 -4.33) (end 11.62 -4.96) (layer F.Fab) (width 0.1))
(fp_line (start 8.44 -4.46) (end 11.49 -5.09) (layer F.Fab) (width 0.1))
(fp_line (start 12.1 -3.44) (end 8.04 -3.44) (layer F.Fab) (width 0.1))
(fp_line (start 12.1 -5.98) (end 12.1 -3.44) (layer F.Fab) (width 0.1))
(fp_line (start 8.04 -5.98) (end 12.1 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 8.04 -3.44) (end 8.04 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 -3.19) (end 12.66 -1.66) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 -0.65) (end 12.66 4.05) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 -1.66) (end 12.66 -0.65) (layer F.Fab) (width 0.1))
(fp_line (start 11.72 0.5) (end 11.34 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 8.42 0.5) (end 8.8 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 8.42 3.67) (end 8.42 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 11.72 3.67) (end 8.42 3.67) (layer F.Fab) (width 0.1))
(fp_line (start 11.72 3.67) (end 11.72 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 12.1 4.31) (end 12.1 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 8.04 4.31) (end 12.1 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 12.1 6.21) (end 12.66 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 12.1 -0.26) (end 12.1 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 8.04 6.21) (end 8.04 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 13.17 3.8) (end 13.17 5.45) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 4.05) (end 12.66 5.2) (layer F.Fab) (width 0.1))
(fp_line (start 13.17 3.8) (end 12.66 4.05) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 5.2) (end 12.66 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 13.17 5.45) (end 12.66 5.2) (layer F.Fab) (width 0.1))
(fp_line (start 13.17 -1.41) (end 12.66 -1.66) (layer F.Fab) (width 0.1))
(fp_line (start 13.17 -6.23) (end 13.17 -1.41) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 -6.23) (end 13.17 -6.23) (layer F.Fab) (width 0.1))
(fp_line (start 12.66 -6.23) (end 12.66 -3.19) (layer F.Fab) (width 0.1))
(fp_line (start 8.8 2.53) (end 8.8 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 8.8 -0.26) (end 11.34 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 11.34 2.53) (end 11.34 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 8.8 2.53) (end 11.34 2.53) (layer F.Fab) (width 0.1))
(fp_line (start -1.28 2.53) (end 1.26 2.53) (layer F.Fab) (width 0.1))
(fp_line (start 1.26 2.53) (end 1.26 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start -1.28 -0.26) (end 1.26 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start -1.28 2.53) (end -1.28 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 3.72 2.53) (end 6.26 2.53) (layer F.Fab) (width 0.1))
(fp_line (start 6.26 2.53) (end 6.26 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 3.72 -0.26) (end 6.26 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 3.72 2.53) (end 3.72 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 8.02 5.2) (end 8.02 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 8.02 4.05) (end 8.02 5.2) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 6.21) (end 2.96 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 7.02 -0.26) (end 7.02 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 6.21) (end 7.02 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 7.02 6.21) (end 7.58 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 6.21) (end 2.02 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 6.21) (end 2.96 6.21) (layer F.Fab) (width 0.1))
(fp_line (start -2.05 -0.26) (end -2.05 4.31) (layer F.Fab) (width 0.1))
(fp_line (start -2.58 6.21) (end -2.05 6.21) (layer F.Fab) (width 0.1))
(fp_line (start -2.05 6.21) (end 2.02 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 4.31) (end 7.02 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 4.31) (end 2.96 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 7.02 4.31) (end 7.02 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 4.31) (end -2.05 4.31) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 4.31) (end 2.02 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start -2.05 4.31) (end -2.05 6.21) (layer F.Fab) (width 0.1))
(fp_line (start 6.64 3.67) (end 6.64 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 6.64 3.67) (end 3.34 3.67) (layer F.Fab) (width 0.1))
(fp_line (start 3.34 3.67) (end 3.34 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 1.64 3.67) (end 1.64 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 1.64 3.67) (end -1.67 3.67) (layer F.Fab) (width 0.1))
(fp_line (start -1.67 3.67) (end -1.67 0.5) (layer F.Fab) (width 0.1))
(fp_line (start -1.67 0.5) (end -1.28 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 1.64 0.5) (end 1.26 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 3.34 0.5) (end 3.72 0.5) (layer F.Fab) (width 0.1))
(fp_line (start 6.64 0.5) (end 6.26 0.5) (layer F.Fab) (width 0.1))
(fp_line (start -2.58 6.21) (end -2.58 -0.65) (layer F.Fab) (width 0.1))
(fp_line (start -2.58 -0.65) (end -2.58 -3.19) (layer F.Fab) (width 0.1))
(fp_line (start -2.58 -3.19) (end 7.58 -3.19) (layer F.Fab) (width 0.1))
(fp_line (start -2.58 -3.19) (end -2.58 -6.23) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 -3.44) (end 2.96 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 -5.98) (end 7.02 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 7.02 -5.98) (end 7.02 -3.44) (layer F.Fab) (width 0.1))
(fp_line (start 7.02 -3.44) (end 2.96 -3.44) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 -3.44) (end 2.02 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 -3.44) (end -2.05 -3.44) (layer F.Fab) (width 0.1))
(fp_line (start -2.05 -3.44) (end -2.05 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 -5.98) (end -2.05 -5.98) (layer F.Fab) (width 0.1))
(fp_line (start 3.36 -4.46) (end 6.41 -5.09) (layer F.Fab) (width 0.1))
(fp_line (start 3.49 -4.33) (end 6.54 -4.96) (layer F.Fab) (width 0.1))
(fp_line (start -1.64 -4.46) (end 1.41 -5.09) (layer F.Fab) (width 0.1))
(fp_line (start -1.51 -4.33) (end 1.53 -4.96) (layer F.Fab) (width 0.1))
(fp_line (start -2.05 -0.26) (end -1.67 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 2.02 -0.26) (end 1.64 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 1.64 -0.26) (end -1.67 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 7.02 -0.26) (end 6.64 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 2.96 -0.26) (end 3.34 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start 3.34 -0.26) (end 6.64 -0.26) (layer F.Fab) (width 0.1))
(fp_line (start -2.83 -6.48) (end 13.42 -6.48) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.83 -6.48) (end -2.83 6.46) (layer F.CrtYd) (width 0.05))
(fp_line (start 13.42 6.46) (end 13.42 -6.48) (layer F.CrtYd) (width 0.05))
(fp_line (start 13.42 6.46) (end -2.83 6.46) (layer F.CrtYd) (width 0.05))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 5 -2 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(fp_arc (start 8.93 -4.66) (end 8.64 -4.14) (angle 104.2) (layer F.Fab) (width 0.1))
(fp_arc (start 10.04 -3.72) (end 8.44 -5.01) (angle 100) (layer F.Fab) (width 0.1))
(fp_arc (start 10.12 -6.08) (end 11.58 -4.13) (angle 75.5) (layer F.Fab) (width 0.1))
(fp_arc (start 11.09 -4.6) (end 11.59 -5.06) (angle 90.5) (layer F.Fab) (width 0.1))
(fp_arc (start 6.01 -4.6) (end 6.51 -5.06) (angle 90.5) (layer F.Fab) (width 0.1))
(fp_arc (start 5.04 -6.08) (end 6.5 -4.13) (angle 75.5) (layer F.Fab) (width 0.1))
(fp_arc (start 4.96 -3.72) (end 3.36 -5.01) (angle 100) (layer F.Fab) (width 0.1))
(fp_arc (start 3.85 -4.66) (end 3.56 -4.14) (angle 104.2) (layer F.Fab) (width 0.1))
(fp_arc (start 1 -4.6) (end 1.51 -5.06) (angle 90.5) (layer F.Fab) (width 0.1))
(fp_arc (start 0.04 -6.08) (end 1.5 -4.13) (angle 75.5) (layer F.Fab) (width 0.1))
(fp_arc (start -0.04 -3.72) (end -1.64 -5.01) (angle 100) (layer F.Fab) (width 0.1))
(fp_arc (start -1.16 -4.66) (end -1.44 -4.14) (angle 104.2) (layer F.Fab) (width 0.1))
(pad 1 thru_hole rect (at 0 0 90) (size 1.98 3.96) (drill 1.32) (layers *.Cu *.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 51 "Net-(J103-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 thru_hole oval (at 5 0 90) (size 1.98 3.96) (drill 1.32) (layers *.Cu *.Mask)
(net 1 Earth))
(pad 3 thru_hole oval (at 10 0 90) (size 1.98 3.96) (drill 1.32) (layers *.Cu *.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 46 +5VL))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/TerminalBlock.3dshapes/TerminalBlock_Altech_AK300-3_P5.00mm.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical (layer F.Cu) (tedit 59FED5CC) (tstamp 5DEF1423)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(at 73.25 86.5)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(descr "Through hole straight pin header, 2x02, 2.54mm pitch, double rows")
(tags "Through hole pin header THT 2x02 2.54mm double row")
(path /5DB7154A)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(fp_text reference J105 (at 1 4.75) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value PT1000 (at 1.27 4.87) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 0 -1.27) (end 3.81 -1.27) (layer F.Fab) (width 0.1))
(fp_line (start 3.81 -1.27) (end 3.81 3.81) (layer F.Fab) (width 0.1))
(fp_line (start 3.81 3.81) (end -1.27 3.81) (layer F.Fab) (width 0.1))
(fp_line (start -1.27 3.81) (end -1.27 0) (layer F.Fab) (width 0.1))
(fp_line (start -1.27 0) (end 0 -1.27) (layer F.Fab) (width 0.1))
(fp_line (start -1.33 3.87) (end 3.87 3.87) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 1.27) (end -1.33 3.87) (layer F.SilkS) (width 0.12))
(fp_line (start 3.87 -1.33) (end 3.87 3.87) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 1.27) (end 1.27 1.27) (layer F.SilkS) (width 0.12))
(fp_line (start 1.27 1.27) (end 1.27 -1.33) (layer F.SilkS) (width 0.12))
(fp_line (start 1.27 -1.33) (end 3.87 -1.33) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 0) (end -1.33 -1.33) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 -1.33) (end 0 -1.33) (layer F.SilkS) (width 0.12))
(fp_line (start -1.8 -1.8) (end -1.8 4.35) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.8 4.35) (end 4.35 4.35) (layer F.CrtYd) (width 0.05))
(fp_line (start 4.35 4.35) (end 4.35 -1.8) (layer F.CrtYd) (width 0.05))
(fp_line (start 4.35 -1.8) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 1.27 1.27 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 9 /Frontend/FORCE+))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 thru_hole oval (at 2.54 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 11 /Frontend/SENS+))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 12 /Frontend/SENS-))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 4 thru_hole oval (at 2.54 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 10 /Frontend/FORCE-))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_2x02_P2.54mm_Vertical.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Connector:Tag-Connect_TC2050-IDC-FP_2x05_P1.27mm_Vertical (layer F.Cu) (tedit 5E0126DB) (tstamp 5DEF1467)
(at 40 72.5)
(descr "Tag-Connect programming header; http://www.tag-connect.com/Materials/TC2050-IDC-430%20Datasheet.pdf")
(tags "tag connect programming header pogo pins")
(path /5D77EC9D/5D75F6EB)
(attr virtual)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference J202 (at 5.5 0 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10PIN_JTAG_SWD (at 0 -4.8) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -3.175 1.27) (end -3.175 0.635) (layer F.SilkS) (width 0.12))
(fp_line (start -2.54 1.27) (end -3.175 1.27) (layer F.SilkS) (width 0.12))
(fp_line (start -5.5 4.25) (end -5.5 -4.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 4.75 4.25) (end -5.5 4.25) (layer F.CrtYd) (width 0.05))
(fp_line (start 4.75 -4.25) (end 4.75 4.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -5.5 -4.25) (end 4.75 -4.25) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.54 0.635) (end -2.54 -0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start 2.54 0.635) (end -2.54 0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start 2.54 -0.635) (end 2.54 0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start -2.54 -0.635) (end 2.54 -0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start -2.54 0.635) (end -1.27 -0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start -2.54 0) (end -1.905 -0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start -1.905 0.635) (end -0.635 -0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start -1.27 0.635) (end 0 -0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start 1.905 0.635) (end 2.54 0) (layer Dwgs.User) (width 0.1))
(fp_line (start -0.635 0.635) (end 0.635 -0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start 0 0.635) (end 1.27 -0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start 0.635 0.635) (end 1.905 -0.635) (layer Dwgs.User) (width 0.1))
(fp_line (start 1.27 0.635) (end 2.54 -0.635) (layer Dwgs.User) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text user KEEPOUT (at 0 0) (layer Cmts.User)
(effects (font (size 0.4 0.4) (thickness 0.07)))
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad "" np_thru_hole circle (at 3.81 -1.016) (size 0.9906 0.9906) (drill 0.9906) (layers *.Cu *.Mask))
(pad "" np_thru_hole circle (at 3.81 1.016) (size 0.9906 0.9906) (drill 0.9906) (layers *.Cu *.Mask))
(pad "" np_thru_hole circle (at -3.81 0) (size 0.9906 0.9906) (drill 0.9906) (layers *.Cu *.Mask))
(pad 1 connect circle (at -2.54 0.635) (size 0.7874 0.7874) (layers F.Cu F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 connect circle (at -1.27 0.635) (size 0.7874 0.7874) (layers F.Cu F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 28 /Controller/SWDIO))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 connect circle (at 0 0.635) (size 0.7874 0.7874) (layers F.Cu F.Mask)
(net 2 GND) (zone_connect 2))
(pad 4 connect circle (at 1.27 0.635) (size 0.7874 0.7874) (layers F.Cu F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 29 /Controller/SWCLK))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 5 connect circle (at 2.54 0.635) (size 0.7874 0.7874) (layers F.Cu F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 62 "Net-(J202-Pad5)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 6 connect circle (at 2.54 -0.635) (size 0.7874 0.7874) (layers F.Cu F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 63 "Net-(J202-Pad6)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 7 connect circle (at 1.27 -0.635) (size 0.7874 0.7874) (layers F.Cu F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 30 /Controller/PC_RX))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 8 connect circle (at 0 -0.635) (size 0.7874 0.7874) (layers F.Cu F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 64 "Net-(J202-Pad8)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 9 connect circle (at -1.27 -0.635) (size 0.7874 0.7874) (layers F.Cu F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 31 /Controller/PC_TX))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 10 connect circle (at -2.54 -0.635) (size 0.7874 0.7874) (layers F.Cu F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 32 /Controller/~RST))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad "" np_thru_hole circle (at -3.81 -2.54) (size 2.3749 2.3749) (drill 2.3749) (layers *.Cu *.Mask))
(pad "" np_thru_hole circle (at -3.81 2.54) (size 2.3749 2.3749) (drill 2.3749) (layers *.Cu *.Mask))
(pad "" np_thru_hole circle (at 1.905 2.54) (size 2.3749 2.3749) (drill 2.3749) (layers *.Cu *.Mask))
(pad "" np_thru_hole circle (at 1.905 -2.54) (size 2.3749 2.3749) (drill 2.3749) (layers *.Cu *.Mask))
)
(module Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical (layer F.Cu) (tedit 59FED5CC) (tstamp 5DEF1497)
(at 32.5 90.34)
(descr "Through hole straight pin header, 1x05, 2.54mm pitch, single row")
(tags "Through hole pin header THT 1x05 2.54mm single row")
(path /5D77EC9D/5D93C5CB)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference J203 (at 0 -2.33) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value RotaryEncoder (at 0 12.49) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer F.Fab) (width 0.1))
(fp_line (start 1.27 -1.27) (end 1.27 11.43) (layer F.Fab) (width 0.1))
(fp_line (start 1.27 11.43) (end -1.27 11.43) (layer F.Fab) (width 0.1))
(fp_line (start -1.27 11.43) (end -1.27 -0.635) (layer F.Fab) (width 0.1))
(fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer F.Fab) (width 0.1))
(fp_line (start -1.33 11.49) (end 1.33 11.49) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 1.27) (end -1.33 11.49) (layer F.SilkS) (width 0.12))
(fp_line (start 1.33 1.27) (end 1.33 11.49) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 1.27) (end 1.33 1.27) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 0) (end -1.33 -1.33) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 -1.33) (end 0 -1.33) (layer F.SilkS) (width 0.12))
(fp_line (start -1.8 -1.8) (end -1.8 11.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.8 11.95) (end 1.8 11.95) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.8 11.95) (end 1.8 -1.8) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 5.08 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(pad 2 thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 8 /Controller/SW1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 5 /Controller/ENC1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 4 thru_hole oval (at 0 7.62) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(pad 5 thru_hole oval (at 0 10.16) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 6 /Controller/ENC2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x05_P2.54mm_Vertical.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder (layer F.Cu) (tedit 5B36C52B) (tstamp 5DEF14A8)
(at 61 103)
(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
(tags "inductor handsolder")
(path /5D77EC9D/5D7C535D)
(attr smd)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(fp_text reference L201 (at 0 1.75) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 100nH (at 0 1.65) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.261252 0.71) (end 0.261252 0.71) (layer F.SilkS) (width 0.12))
(fp_line (start -0.261252 -0.71) (end 0.261252 -0.71) (layer F.SilkS) (width 0.12))
(fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1))
(fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1))
(fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1))
(fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.08)))
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(pad 2 smd roundrect (at 1.025 0) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(pad 1 smd roundrect (at -1.025 0) (size 1.15 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.217391)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 45 /Controller/VDDA))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Inductor_SMD.3dshapes/L_0805_2012Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical (layer F.Cu) (tedit 59FED5CC) (tstamp 5DEF14CF)
(at 66.5 74 180)
(descr "Through hole straight pin header, 1x02, 2.54mm pitch, single row")
(tags "Through hole pin header THT 1x02 2.54mm single row")
(path /5D891662)
(fp_text reference LS101 (at 2 1.5 90) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value Buzzer (at 0 4.87) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer F.Fab) (width 0.1))
(fp_line (start 1.27 -1.27) (end 1.27 3.81) (layer F.Fab) (width 0.1))
(fp_line (start 1.27 3.81) (end -1.27 3.81) (layer F.Fab) (width 0.1))
(fp_line (start -1.27 3.81) (end -1.27 -0.635) (layer F.Fab) (width 0.1))
(fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer F.Fab) (width 0.1))
(fp_line (start -1.33 3.87) (end 1.33 3.87) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 1.27) (end -1.33 3.87) (layer F.SilkS) (width 0.12))
(fp_line (start 1.33 1.27) (end 1.33 3.87) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 1.27) (end 1.33 1.27) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 0) (end -1.33 -1.33) (layer F.SilkS) (width 0.12))
(fp_line (start -1.33 -1.33) (end 0 -1.33) (layer F.SilkS) (width 0.12))
(fp_line (start -1.8 -1.8) (end -1.8 4.35) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.8 4.35) (end 1.8 4.35) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.8 4.35) (end 1.8 -1.8) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 1.27 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 thru_hole rect (at 0 0 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 33 "Net-(LS101-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 thru_hole oval (at 0 2.54 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 46 +5VL))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x02_P2.54mm_Vertical.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Package_TO_SOT_SMD:SOT-23 (layer B.Cu) (tedit 5A02FF57) (tstamp 5DEF14E4)
(at 87 93)
(descr "SOT-23, Standard")
(tags SOT-23)
(path /5D881694)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference Q102 (at -2.5 0 90) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value BSS123 (at 0 -2.5) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.7 0.95) (end -0.7 -1.5) (layer B.Fab) (width 0.1))
(fp_line (start -0.15 1.52) (end 0.7 1.52) (layer B.Fab) (width 0.1))
(fp_line (start -0.7 0.95) (end -0.15 1.52) (layer B.Fab) (width 0.1))
(fp_line (start 0.7 1.52) (end 0.7 -1.52) (layer B.Fab) (width 0.1))
(fp_line (start -0.7 -1.52) (end 0.7 -1.52) (layer B.Fab) (width 0.1))
(fp_line (start 0.76 -1.58) (end 0.76 -0.65) (layer B.SilkS) (width 0.12))
(fp_line (start 0.76 1.58) (end 0.76 0.65) (layer B.SilkS) (width 0.12))
(fp_line (start -1.7 1.75) (end 1.7 1.75) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.7 1.75) (end 1.7 -1.75) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.7 -1.75) (end -1.7 -1.75) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.7 -1.75) (end -1.7 1.75) (layer B.CrtYd) (width 0.05))
(fp_line (start 0.76 1.58) (end -1.4 1.58) (layer B.SilkS) (width 0.12))
(fp_line (start 0.76 -1.58) (end -0.7 -1.58) (layer B.SilkS) (width 0.12))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0 -90) (layer B.Fab)
(effects (font (size 0.5 0.5) (thickness 0.075)) (justify mirror))
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd rect (at -1 0.95) (size 0.9 0.8) (layers B.Cu B.Paste B.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 48 "Net-(C102-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd rect (at -1 -0.95) (size 0.9 0.8) (layers B.Cu B.Paste B.Mask)
(net 2 GND))
(pad 3 smd rect (at 1 0) (size 0.9 0.8) (layers B.Cu B.Paste B.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 51 "Net-(J103-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Package_TO_SOT_SMD:SOT-23 (layer F.Cu) (tedit 5A02FF57) (tstamp 5DEF14F9)
(at 67 78.5 90)
(descr "SOT-23, Standard")
(tags SOT-23)
(path /5D8AFFC1)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference Q101 (at 0 -2.5 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value BSS123 (at 0 2.5 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 0.76 1.58) (end -0.7 1.58) (layer F.SilkS) (width 0.12))
(fp_line (start 0.76 -1.58) (end -1.4 -1.58) (layer F.SilkS) (width 0.12))
(fp_line (start -1.7 1.75) (end -1.7 -1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.7 1.75) (end -1.7 1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.7 -1.75) (end 1.7 1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.7 -1.75) (end 1.7 -1.75) (layer F.CrtYd) (width 0.05))
(fp_line (start 0.76 -1.58) (end 0.76 -0.65) (layer F.SilkS) (width 0.12))
(fp_line (start 0.76 1.58) (end 0.76 0.65) (layer F.SilkS) (width 0.12))
(fp_line (start -0.7 1.52) (end 0.7 1.52) (layer F.Fab) (width 0.1))
(fp_line (start 0.7 -1.52) (end 0.7 1.52) (layer F.Fab) (width 0.1))
(fp_line (start -0.7 -0.95) (end -0.15 -1.52) (layer F.Fab) (width 0.1))
(fp_line (start -0.15 -1.52) (end 0.7 -1.52) (layer F.Fab) (width 0.1))
(fp_line (start -0.7 -0.95) (end -0.7 1.5) (layer F.Fab) (width 0.1))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.5 0.5) (thickness 0.075)))
)
(pad 3 smd rect (at 1 0 90) (size 0.9 0.8) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 33 "Net-(LS101-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd rect (at -1 0.95 90) (size 0.9 0.8) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad 1 smd rect (at -1 -0.95 90) (size 0.9 0.8) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 52 "Net-(Q101-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF150A)
(at 22.5 20.5 90)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D70EFF3)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference R106 (at 0 -1.43 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 1M (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 1 Earth))
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5DEF151B)
(at 85.5 98)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D88AD1A)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference R103 (at 3.27 0.05) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 10k (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 48 "Net-(C102-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 41 /OUT0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF152C)
(at 66 82 90)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8BE522)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference R101 (at -1 -1.43 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10k (at 0 1.43 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 44 /OUT1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 52 "Net-(Q101-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E01540C)
(at 25 49.5)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8F3F07)
(attr smd)
(fp_text reference R104 (at 0.07 -1.5) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 1k5 (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 19 "Net-(D102-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF154E)
(at 29 54.5)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8F3AEF)
(attr smd)
(fp_text reference R105 (at 0.5 -1.5) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 1k5 (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 50 "Net-(D103-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5DEF155F)
(at 87.5 88 270)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8FC0CC)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference R102 (at 0 1.43 90) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 22k (at 0 -1.43 90) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 46 +5VL))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 51 "Net-(J103-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5DEF1570)
(at 48.5 105.5)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5D855B79)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R201 (at 0 1.43) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 1M (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 58 "Net-(C207-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 57 "Net-(C206-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF15A3)
(at 32 69.5 180)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5DDD574C)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R204 (at 0 10) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10k (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 14 /Controller/SDIO_D0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF15B4)
(at 32 71 180)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5DDD5A92)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R205 (at 0 10.25) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10k (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 15 /Controller/SDIO_CLK))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF15C5)
(at 32 74 180)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5DDD5F3A)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R206 (at 0 10.75) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10k (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 16 /Controller/SDIO_CMD))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF15D6)
(at 32 75.5 180)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5DDD7B84)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R207 (at 0 11) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10k (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 17 /Controller/SDIO_D3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF15E7)
(at 32 77 180)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5DDD7F38)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R208 (at 0 11.25) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10k (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 18 /Controller/SDIO_D2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5DEF15F8)
(at 38.5 69.2125 270)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5D7B48C6)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R209 (at 3.2875 0 90) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 10k (at 0 -1.43 90) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0 270) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 270) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 32 /Controller/~RST))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF1609)
(at 37.5 78)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5DE7DF04)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R210 (at 3.5 0) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10k (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 28 /Controller/SWDIO))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DEF161A)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(at 41 80.25 180)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5DE7B2A7)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R211 (at 3.5 0) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10k (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 29 /Controller/SWCLK))
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(module Resistor_SMD:R_0603_1608Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5E495FDF)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(at 30 93.5)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5D7D2B75)
(attr smd)
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(fp_text reference R212 (at -0.5 -1.75) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 10k (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 5 /Controller/ENC1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5DEF164D)
(at 30 102.5)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5D7D322F)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R213 (at -0.5 1.43) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 10k (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 6 /Controller/ENC2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5E01C7D3)
(at 53 98.5 90)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D8C5188/5D9B187D)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R308 (at 3.5 0 270) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(fp_text value 0 (at 0 -1.43 270) (layer B.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0 270) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 117 /Frontend/VREF_OP))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 7 /Controller/VREF))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Potentiometer_THT:Potentiometer_Bourns_3266X_Horizontal (layer F.Cu) (tedit 5A3D4994) (tstamp 5DEF177D)
(at 23.5 59)
(descr "Potentiometer, horizontal, Bourns 3266X, https://www.bourns.com/docs/Product-Datasheets/3266.pdf")
(tags "Potentiometer horizontal Bourns 3266X")
(path /5D77EC9D/5D944119)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference RV201 (at -2.5 4.5 180) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10k (at -3.3 4.73) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -5.895 -1.02) (end -5.895 3.48) (layer F.Fab) (width 0.1))
(fp_line (start -5.895 3.48) (end 0.815 3.48) (layer F.Fab) (width 0.1))
(fp_line (start 0.815 3.48) (end 0.815 -1.02) (layer F.Fab) (width 0.1))
(fp_line (start 0.815 -1.02) (end -5.895 -1.02) (layer F.Fab) (width 0.1))
(fp_line (start -7.415 1.32) (end -7.415 3.1) (layer F.Fab) (width 0.1))
(fp_line (start -7.415 3.1) (end -5.895 3.1) (layer F.Fab) (width 0.1))
(fp_line (start -5.895 3.1) (end -5.895 1.32) (layer F.Fab) (width 0.1))
(fp_line (start -5.895 1.32) (end -7.415 1.32) (layer F.Fab) (width 0.1))
(fp_line (start -7.415 2.21) (end -6.655 2.21) (layer F.Fab) (width 0.1))
(fp_line (start -6.015 -1.14) (end 0.935 -1.14) (layer F.SilkS) (width 0.12))
(fp_line (start -6.015 3.6) (end 0.935 3.6) (layer F.SilkS) (width 0.12))
(fp_line (start -6.015 -1.14) (end -6.015 -0.495) (layer F.SilkS) (width 0.12))
(fp_line (start -6.015 0.495) (end -6.015 3.6) (layer F.SilkS) (width 0.12))
(fp_line (start 0.935 -1.14) (end 0.935 -0.495) (layer F.SilkS) (width 0.12))
(fp_line (start 0.935 0.495) (end 0.935 3.6) (layer F.SilkS) (width 0.12))
(fp_line (start -7.535 1.2) (end -6.016 1.2) (layer F.SilkS) (width 0.12))
(fp_line (start -7.535 3.22) (end -6.016 3.22) (layer F.SilkS) (width 0.12))
(fp_line (start -7.535 1.2) (end -7.535 3.22) (layer F.SilkS) (width 0.12))
(fp_line (start -6.016 1.2) (end -6.016 3.22) (layer F.SilkS) (width 0.12))
(fp_line (start -7.535 2.21) (end -6.776 2.21) (layer F.SilkS) (width 0.12))
(fp_line (start -7.7 -1.3) (end -7.7 3.75) (layer F.CrtYd) (width 0.05))
(fp_line (start -7.7 3.75) (end 1.1 3.75) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.1 3.75) (end 1.1 -1.3) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.1 -1.3) (end -7.7 -1.3) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at -2.54 1.23) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 thru_hole circle (at 0 0) (size 1.44 1.44) (drill 0.8) (layers *.Cu *.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 46 +5VL))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 thru_hole circle (at -2.54 2.54) (size 1.44 1.44) (drill 0.8) (layers *.Cu *.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 34 /Controller/LCD_VO))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 thru_hole circle (at -5.08 0) (size 1.44 1.44) (drill 0.8) (layers *.Cu *.Mask)
(net 2 GND))
(model ${KISYS3DMOD}/Potentiometer_THT.3dshapes/Potentiometer_Bourns_3266X_Horizontal.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Package_TO_SOT_SMD:TO-252-2 (layer F.Cu) (tedit 5A70A390) (tstamp 5DEF17B3)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(at 36.75 50.75 180)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(descr "TO-252 / DPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO252/PG-TO252-3-1/")
(tags "DPAK TO-252 DPAK-3 TO-252-3 SOT-428")
(path /5D71A1E5)
(attr smd)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text reference U103 (at -3.85 -4.2) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text value AZ1117-3.3 (at 0 4.5) (layer F.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 5.55 -3.5) (end -5.55 -3.5) (layer F.CrtYd) (width 0.05))
(fp_line (start 5.55 3.5) (end 5.55 -3.5) (layer F.CrtYd) (width 0.05))
(fp_line (start -5.55 3.5) (end 5.55 3.5) (layer F.CrtYd) (width 0.05))
(fp_line (start -5.55 -3.5) (end -5.55 3.5) (layer F.CrtYd) (width 0.05))
(fp_line (start -2.47 3.18) (end -3.57 3.18) (layer F.SilkS) (width 0.12))
(fp_line (start -2.47 3.45) (end -2.47 3.18) (layer F.SilkS) (width 0.12))
(fp_line (start -0.97 3.45) (end -2.47 3.45) (layer F.SilkS) (width 0.12))
(fp_line (start -2.47 -3.18) (end -5.3 -3.18) (layer F.SilkS) (width 0.12))
(fp_line (start -2.47 -3.45) (end -2.47 -3.18) (layer F.SilkS) (width 0.12))
(fp_line (start -0.97 -3.45) (end -2.47 -3.45) (layer F.SilkS) (width 0.12))
(fp_line (start -4.97 2.655) (end -2.27 2.655) (layer F.Fab) (width 0.1))
(fp_line (start -4.97 1.905) (end -4.97 2.655) (layer F.Fab) (width 0.1))
(fp_line (start -2.27 1.905) (end -4.97 1.905) (layer F.Fab) (width 0.1))
(fp_line (start -4.97 -1.905) (end -2.27 -1.905) (layer F.Fab) (width 0.1))
(fp_line (start -4.97 -2.655) (end -4.97 -1.905) (layer F.Fab) (width 0.1))
(fp_line (start -1.865 -2.655) (end -4.97 -2.655) (layer F.Fab) (width 0.1))
(fp_line (start -1.27 -3.25) (end 3.95 -3.25) (layer F.Fab) (width 0.1))
(fp_line (start -2.27 -2.25) (end -1.27 -3.25) (layer F.Fab) (width 0.1))
(fp_line (start -2.27 3.25) (end -2.27 -2.25) (layer F.Fab) (width 0.1))
(fp_line (start 3.95 3.25) (end -2.27 3.25) (layer F.Fab) (width 0.1))
(fp_line (start 3.95 -3.25) (end 3.95 3.25) (layer F.Fab) (width 0.1))
(fp_line (start 4.95 2.7) (end 3.95 2.7) (layer F.Fab) (width 0.1))
(fp_line (start 4.95 -2.7) (end 4.95 2.7) (layer F.Fab) (width 0.1))
(fp_line (start 3.95 -2.7) (end 4.95 -2.7) (layer F.Fab) (width 0.1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer F.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(pad "" smd rect (at 0.425 1.525 180) (size 3.05 2.75) (layers F.Paste))
(pad "" smd rect (at 3.775 -1.525 180) (size 3.05 2.75) (layers F.Paste))
(pad "" smd rect (at 0.425 -1.525 180) (size 3.05 2.75) (layers F.Paste))
(pad "" smd rect (at 3.775 1.525 180) (size 3.05 2.75) (layers F.Paste))
(pad 2 smd rect (at 2.1 0 180) (size 6.4 5.8) (layers F.Cu F.Mask)
(net 3 +3V3))
(pad 3 smd rect (at -4.2 2.28 180) (size 2.2 1.2) (layers F.Cu F.Paste F.Mask)
(net 46 +5VL))
(pad 1 smd rect (at -4.2 -2.28 180) (size 2.2 1.2) (layers F.Cu F.Paste F.Mask)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(net 2 GND))
(model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/TO-252-2.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm (layer F.Cu) (tedit 5C97300E) (tstamp 5DEF1826)
(at 57.5 75.5 180)
(descr "SOIC, 20 Pin (JEDEC MS-013AC, https://www.analog.com/media/en/package-pcb-resources/package/233848rw_20.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py")
(tags "SOIC SO")
(path /5D77EC9D/5D90FF0A)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference U201 (at 0 -7.35) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 74HCT244 (at 0 7.35) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 0 6.51) (end 3.86 6.51) (layer F.SilkS) (width 0.12))
(fp_line (start 3.86 6.51) (end 3.86 6.275) (layer F.SilkS) (width 0.12))
(fp_line (start 0 6.51) (end -3.86 6.51) (layer F.SilkS) (width 0.12))
(fp_line (start -3.86 6.51) (end -3.86 6.275) (layer F.SilkS) (width 0.12))
(fp_line (start 0 -6.51) (end 3.86 -6.51) (layer F.SilkS) (width 0.12))
(fp_line (start 3.86 -6.51) (end 3.86 -6.275) (layer F.SilkS) (width 0.12))
(fp_line (start 0 -6.51) (end -3.86 -6.51) (layer F.SilkS) (width 0.12))
(fp_line (start -3.86 -6.51) (end -3.86 -6.275) (layer F.SilkS) (width 0.12))
(fp_line (start -3.86 -6.275) (end -5.675 -6.275) (layer F.SilkS) (width 0.12))
(fp_line (start -2.75 -6.4) (end 3.75 -6.4) (layer F.Fab) (width 0.1))
(fp_line (start 3.75 -6.4) (end 3.75 6.4) (layer F.Fab) (width 0.1))
(fp_line (start 3.75 6.4) (end -3.75 6.4) (layer F.Fab) (width 0.1))
(fp_line (start -3.75 6.4) (end -3.75 -5.4) (layer F.Fab) (width 0.1))
(fp_line (start -3.75 -5.4) (end -2.75 -6.4) (layer F.Fab) (width 0.1))
(fp_line (start -5.93 -6.65) (end -5.93 6.65) (layer F.CrtYd) (width 0.05))
(fp_line (start -5.93 6.65) (end 5.93 6.65) (layer F.CrtYd) (width 0.05))
(fp_line (start 5.93 6.65) (end 5.93 -6.65) (layer F.CrtYd) (width 0.05))
(fp_line (start 5.93 -6.65) (end -5.93 -6.65) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad 1 smd roundrect (at -4.65 -5.715 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 2 smd roundrect (at -4.65 -4.445 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 67 "Net-(U201-Pad2)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 smd roundrect (at -4.65 -3.175 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 39 /Controller/LCD_D2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 4 smd roundrect (at -4.65 -1.905 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 68 "Net-(U201-Pad4)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 5 smd roundrect (at -4.65 -0.635 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 37 /Controller/LCD_D3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 6 smd roundrect (at -4.65 0.635 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 69 "Net-(U201-Pad6)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 7 smd roundrect (at -4.65 1.905 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 70 "Net-(U201-Pad7)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 8 smd roundrect (at -4.65 3.175 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 71 "Net-(U201-Pad8)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 9 smd roundrect (at -4.65 4.445 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 72 "Net-(U201-Pad9)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 10 smd roundrect (at -4.65 5.715 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 11 smd roundrect (at 4.65 5.715 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 12 smd roundrect (at 4.65 4.445 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 40 /Controller/LCD_D1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 13 smd roundrect (at 4.65 3.175 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 14 smd roundrect (at 4.65 1.905 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 38 /Controller/LCD_D0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 15 smd roundrect (at 4.65 0.635 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 73 "Net-(U201-Pad15)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 16 smd roundrect (at 4.65 -0.635 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 36 /Controller/LCD_EN))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 17 smd roundrect (at 4.65 -1.905 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 74 "Net-(U201-Pad17)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 18 smd roundrect (at 4.65 -3.175 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 35 /Controller/LCD_RS))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 19 smd roundrect (at 4.65 -4.445 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 20 smd roundrect (at 4.65 -5.715 180) (size 2.05 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 46 +5VL))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Package_SO.3dshapes/SOIC-20W_7.5x12.8mm_P1.27mm.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Crystal:Crystal_SMD_Abracon_ABM3B-4Pin_5.0x3.2mm (layer F.Cu) (tedit 5A0FD1B2) (tstamp 5DEF1941)
(at 48.5 105.5 180)
(descr "Abracon Miniature Ceramic Smd Crystal ABM3B http://www.abracon.com/Resonators/abm3b.pdf, 5.0x3.2mm^2 package")
(tags "SMD SMT crystal")
(path /5D77EC9D/5D80C867)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference Y201 (at 0 -2.8) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value "ABM3B 8MHz" (at 0 2.8) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -2.3 -1.6) (end 2.3 -1.6) (layer F.Fab) (width 0.1))
(fp_line (start 2.3 -1.6) (end 2.5 -1.4) (layer F.Fab) (width 0.1))
(fp_line (start 2.5 -1.4) (end 2.5 1.4) (layer F.Fab) (width 0.1))
(fp_line (start 2.5 1.4) (end 2.3 1.6) (layer F.Fab) (width 0.1))
(fp_line (start 2.3 1.6) (end -2.3 1.6) (layer F.Fab) (width 0.1))
(fp_line (start -2.3 1.6) (end -2.5 1.4) (layer F.Fab) (width 0.1))
(fp_line (start -2.5 1.4) (end -2.5 -1.4) (layer F.Fab) (width 0.1))
(fp_line (start -2.5 -1.4) (end -2.3 -1.6) (layer F.Fab) (width 0.1))
(fp_line (start -2.5 0.6) (end -1.5 1.6) (layer F.Fab) (width 0.1))
(fp_line (start -3.1 0.4) (end -2.7 0.4) (layer F.SilkS) (width 0.12))
(fp_line (start -2.7 0.4) (end -2.7 -0.4) (layer F.SilkS) (width 0.12))
(fp_line (start 2.7 -0.4) (end 2.7 0.4) (layer F.SilkS) (width 0.12))
(fp_line (start -0.9 -1.8) (end 0.9 -1.8) (layer F.SilkS) (width 0.12))
(fp_line (start 0.9 1.8) (end -0.9 1.8) (layer F.SilkS) (width 0.12))
(fp_line (start -0.9 1.8) (end -0.9 2.04) (layer F.SilkS) (width 0.12))
(fp_line (start -3.2 -2.1) (end -3.2 2.1) (layer F.CrtYd) (width 0.05))
(fp_line (start -3.2 2.1) (end 3.2 2.1) (layer F.CrtYd) (width 0.05))
(fp_line (start 3.2 2.1) (end 3.2 -2.1) (layer F.CrtYd) (width 0.05))
(fp_line (start 3.2 -2.1) (end -3.2 -2.1) (layer F.CrtYd) (width 0.05))
(fp_circle (center 0 0) (end 0.5 0) (layer F.Adhes) (width 0.1))
(fp_circle (center 0 0) (end 0.416667 0) (layer F.Adhes) (width 0.166667))
(fp_circle (center 0 0) (end 0.266667 0) (layer F.Adhes) (width 0.166667))
(fp_circle (center 0 0) (end 0.116667 0) (layer F.Adhes) (width 0.233333))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd rect (at -2 1.2 180) (size 1.8 1.2) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 58 "Net-(C207-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd rect (at 2 1.2 180) (size 1.8 1.2) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(pad 3 smd rect (at 2 -1.2 180) (size 1.8 1.2) (layers F.Cu F.Paste F.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 57 "Net-(C206-Pad1)"))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 4 smd rect (at -2 -1.2 180) (size 1.8 1.2) (layers F.Cu F.Paste F.Mask)
(net 2 GND))
(model ${KISYS3DMOD}/Crystal.3dshapes/Crystal_SMD_Abracon_ABM3B-4Pin_5.0x3.2mm.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Connector_Multicomp:Multicomp_MC9A22-1034_2x05_P2.54mm_Horizontal (layer F.Cu) (tedit 5A16A5B3) (tstamp 5E016E79)
(at 26.5 100.5 90)
(descr http://www.farnell.com/cad/360651.pdf)
(tags "connector multicomp MC9A MC9A22")
(path /5E023D81)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference J102 (at -3 -3.5 90) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value DIGIO (at 5.08 -5.5 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -5.07 -4.34) (end -5.07 -13.24) (layer F.SilkS) (width 0.15))
(fp_line (start -5.07 -13.24) (end 15.23 -13.24) (layer F.SilkS) (width 0.15))
(fp_line (start 15.23 -13.24) (end 15.23 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 15.23 -4.34) (end -5.07 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 2.855 -13.24) (end 2.855 -6.64) (layer F.SilkS) (width 0.15))
(fp_line (start 2.855 -6.64) (end 7.305 -6.64) (layer F.SilkS) (width 0.15))
(fp_line (start 7.305 -6.64) (end 7.305 -13.24) (layer F.SilkS) (width 0.15))
(fp_line (start 4.68 -6.64) (end 4.68 -12.84) (layer F.SilkS) (width 0.15))
(fp_line (start 4.68 -12.84) (end 4.88 -13.04) (layer F.SilkS) (width 0.15))
(fp_line (start 4.88 -13.04) (end 5.28 -13.04) (layer F.SilkS) (width 0.15))
(fp_line (start 5.28 -13.04) (end 5.48 -12.84) (layer F.SilkS) (width 0.15))
(fp_line (start 5.48 -12.84) (end 5.48 -6.64) (layer F.SilkS) (width 0.15))
(fp_line (start -1 -12.5) (end 1 -12.5) (layer F.SilkS) (width 0.15))
(fp_line (start 1 -12.5) (end 0 -11) (layer F.SilkS) (width 0.15))
(fp_line (start 0 -11) (end -1 -12.5) (layer F.SilkS) (width 0.15))
(fp_line (start -5.55 1.35) (end -5.55 -13.75) (layer F.CrtYd) (width 0.05))
(fp_line (start -5.55 -13.75) (end 15.75 -13.75) (layer F.CrtYd) (width 0.05))
(fp_line (start 15.75 -13.75) (end 15.75 1.35) (layer F.CrtYd) (width 0.05))
(fp_line (start 15.75 1.35) (end -5.55 1.35) (layer F.CrtYd) (width 0.05))
(fp_line (start -0.4 -1.1) (end -0.4 -1.44) (layer F.SilkS) (width 0.15))
(fp_line (start 0.4 -1.1) (end 0.4 -1.44) (layer F.SilkS) (width 0.15))
(fp_line (start -0.4 -3.64) (end -0.4 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 0.4 -3.64) (end 0.4 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 2.14 -1.1) (end 2.14 -1.44) (layer F.SilkS) (width 0.15))
(fp_line (start 2.94 -1.1) (end 2.94 -1.44) (layer F.SilkS) (width 0.15))
(fp_line (start 2.14 -3.64) (end 2.14 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 2.94 -3.64) (end 2.94 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 4.68 -1.1) (end 4.68 -1.44) (layer F.SilkS) (width 0.15))
(fp_line (start 5.48 -1.1) (end 5.48 -1.44) (layer F.SilkS) (width 0.15))
(fp_line (start 4.68 -3.64) (end 4.68 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 5.48 -3.64) (end 5.48 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 7.22 -1.1) (end 7.22 -1.44) (layer F.SilkS) (width 0.15))
(fp_line (start 8.02 -1.1) (end 8.02 -1.44) (layer F.SilkS) (width 0.15))
(fp_line (start 7.22 -3.64) (end 7.22 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 8.02 -3.64) (end 8.02 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 9.76 -1.1) (end 9.76 -1.44) (layer F.SilkS) (width 0.15))
(fp_line (start 10.56 -1.1) (end 10.56 -1.44) (layer F.SilkS) (width 0.15))
(fp_line (start 9.76 -3.64) (end 9.76 -4.34) (layer F.SilkS) (width 0.15))
(fp_line (start 10.56 -3.64) (end 10.56 -4.34) (layer F.SilkS) (width 0.15))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(fp_text user %R (at 5.08 -1.27 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 thru_hole rect (at 0 0 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(pad 2 thru_hole circle (at 0 -2.54 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 27 /DIGIO0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 3 thru_hole circle (at 2.54 0 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(pad 4 thru_hole circle (at 2.54 -2.54 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 26 /DIGIO1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 5 thru_hole circle (at 5.08 0 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(pad 6 thru_hole circle (at 5.08 -2.54 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 25 /DIGIO2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 7 thru_hole circle (at 7.62 0 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(pad 8 thru_hole circle (at 7.62 -2.54 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 24 /DIGIO3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 9 thru_hole circle (at 10.16 0 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
(net 2 GND))
(pad 10 thru_hole circle (at 10.16 -2.54 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(model ${KIPRJMOD}/vasch_strip_5x2_90.wrl
(offset (xyz 5.08 6.35 0))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5E034027)
(at 32 68 180)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5DDD51E7)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R203 (at 0 9.75) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value 10k (at 0 1.43) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 13 /Controller/SDIO_D1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5E03D0D0)
(at 45 96.5 180)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5E579D23)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference C202 (at 0 1.43) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 100n (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E06395E)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(at 57.5 102)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D77EC9D/5E6DD5D6)
(attr smd)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(fp_text reference C215 (at -0.25 1.75) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(fp_text value 22n (at 0 1.43) (layer F.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
)
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 20 /Controller/TEMP_IN))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E05FC8D)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(at 54.5 55.5)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(path /5D77EC9D/5E2ED53B)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(attr smd)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(fp_text reference C203 (at 0 -1.43) (layer F.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(fp_text value 100n (at 0 1.43) (layer F.Fab)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)))
)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(fp_text user %R (at 0 0) (layer F.Fab)
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(effects (font (size 0.4 0.4) (thickness 0.06)))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(net 2 GND))
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 34 /Controller/LCD_VO))
Layout opamp changes. Remove INA126 and put in 3 standard opamps instead
2020-01-11 20:58:21 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module proz_unknown:1271.1001 (layer F.Cu) (tedit 5C192637) (tstamp 5E0E44F5)
(at 21 52 180)
(path /5E21EC78)
(fp_text reference FID101 (at 0.5 5.5) (layer F.SilkS) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value LightGuide (at 4.1 -2.5) (layer F.Fab) hide
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -2.5 1.5) (end 2.5 1.5) (layer F.SilkS) (width 0.15))
(fp_line (start -2.5 -1.5) (end 2.5 -1.5) (layer F.SilkS) (width 0.15))
(fp_line (start -6.3 1.5) (end 8.1 1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start 8.1 1.5) (end 8.1 -1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start 8.1 -1.5) (end -6.3 -1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start -6.3 -1.5) (end -6.3 1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start 1.5 -1.5) (end 1.5 1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start -1.5 1.5) (end -1.5 -1.5) (layer F.CrtYd) (width 0.12))
(fp_line (start -1.8 -1.2) (end -6 -1.2) (layer F.CrtYd) (width 0.12))
(fp_line (start -6 -1.2) (end -6 1.2) (layer F.CrtYd) (width 0.12))
(fp_line (start -6 1.2) (end -1.8 1.2) (layer F.CrtYd) (width 0.12))
(fp_line (start -1.8 1.2) (end -1.8 -1.2) (layer F.CrtYd) (width 0.12))
(pad "" np_thru_hole circle (at 0 0 180) (size 2.3 2.3) (drill 2.3) (layers *.Cu *.Mask))
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(model ${KIPRJMOD}/lightguide.x3d
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
(module Capacitor_SMD:C_0603_1608Metric (layer B.Cu) (tedit 5B301BBE) (tstamp 5E0E1D28)
(at 25.7125 88 180)
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5E1FEFD9)
(attr smd)
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(fp_text reference C101 (at 0 1.43) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 100n (at 0 -1.43) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
Schematic beautify and layout improvments, Length matching for SDIO
2019-12-25 19:15:32 +01:00
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
(net 2 GND))
(pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
Include light guides for LEDs
2019-12-25 00:36:35 +01:00
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5B301BBE) (tstamp 5E3D3F05)
(at 76.75 105.5)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags capacitor)
(path /5D8C5188/5E2394E4)
(attr smd)
Re-enumerate components. This finilizes draft version for V1.2
2020-02-18 20:19:59 +01:00
(fp_text reference C309 (at 3.25 0) (layer F.SilkS)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(fp_text value Bridge (at 0 1.43) (layer F.Fab)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(effects (font (size 1 1) (thickness 0.15)))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer F.SilkS) (width 0.12))
(fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05))
(fp_text user %R (at 0 0) (layer F.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(pad 1 smd roundrect (at -0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 127 "Net-(C309-Pad1)"))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(pad 2 smd roundrect (at 0.7875 0) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(net 2 GND))
(model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)
(module Resistor_SMD:R_0603_1608Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5E0FC476)
(at 32 67.5 90)
(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
(tags resistor)
(path /5D77EC9D/5E1C8562)
(attr smd)
Re-annotate components
2020-02-05 18:58:36 +01:00
(fp_text reference R202 (at 0 1.43 90) (layer B.SilkS)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_text value 10k (at 0 -1.43 90) (layer B.Fab)
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
)
(fp_line (start -0.8 -0.4) (end -0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.8 0.4) (end 0.8 0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start 0.8 -0.4) (end -0.8 -0.4) (layer B.Fab) (width 0.1))
(fp_line (start -0.162779 0.51) (end 0.162779 0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -0.162779 -0.51) (end 0.162779 -0.51) (layer B.SilkS) (width 0.12))
(fp_line (start -1.48 -0.73) (end -1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start -1.48 0.73) (end 1.48 0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 0.73) (end 1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_line (start 1.48 -0.73) (end -1.48 -0.73) (layer B.CrtYd) (width 0.05))
(fp_text user %R (at 0 0 90) (layer B.Fab)
(effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror))
)
(pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 3 +3V3))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.25)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(net 47 /Controller/CARD_DETECT))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
Replace custom opamp circuit with INA126 instrumentation amp
2020-01-02 00:08:09 +01:00
)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(gr_line (start 96.5 71.5) (end 96.5 73.5) (layer Edge.Cuts) (width 0.05) (tstamp 5EC2406E))
(gr_line (start 85 71.5) (end 96.5 71.5) (layer Edge.Cuts) (width 0.05))
(gr_line (start 85 51) (end 85 71.5) (layer Edge.Cuts) (width 0.05))
(gr_line (start 74 40) (end 85 51) (layer Edge.Cuts) (width 0.05))
(gr_line (start 73 40) (end 74 40) (layer Edge.Cuts) (width 0.05))
(gr_line (start 73 42) (end 73 40) (layer Edge.Cuts) (width 0.05))
(gr_line (start 83 52) (end 73 42) (layer Edge.Cuts) (width 0.05))
(gr_line (start 83 73.5) (end 83 52) (layer Edge.Cuts) (width 0.05))
(gr_line (start 96.5 73.5) (end 83 73.5) (layer Edge.Cuts) (width 0.05))
(gr_line (start 98 16) (end 98 18) (layer Edge.Cuts) (width 0.05))
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(gr_line (start 98 13) (end 98 16) (layer Edge.Cuts) (width 0.05))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(gr_text https://git.shimatta.de/pcb/reflow-oven-control-pcb (at 52.5 39) (layer B.Cu)
Add git url
2020-02-18 20:51:03 +01:00
(effects (font (size 1 1) (thickness 0.2)) (justify mirror))
)
add GND points near test points to get good ground connection
2020-02-18 20:37:26 +01:00
(gr_line (start 65.25 90.75) (end 65.5 90.5) (layer F.SilkS) (width 0.12))
(gr_line (start 63.25 90.75) (end 65.25 90.75) (layer F.SilkS) (width 0.12))
(gr_line (start 63.25 91) (end 63.25 90.75) (layer F.SilkS) (width 0.12) (tstamp 5E4D0681))
(gr_line (start 62 91) (end 63.25 91) (layer F.SilkS) (width 0.12))
(gr_line (start 62 86.25) (end 62 91) (layer F.SilkS) (width 0.12))
(gr_line (start 63.25 86.25) (end 62 86.25) (layer F.SilkS) (width 0.12))
(gr_line (start 63.25 90.75) (end 63.25 86.25) (layer F.SilkS) (width 0.12))
(gr_line (start 63.25 106.5) (end 63.75 106) (layer F.SilkS) (width 0.12))
(gr_line (start 57.75 106.5) (end 63.25 106.5) (layer F.SilkS) (width 0.12))
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(gr_line (start 75 82.5) (end 74.5 82.5) (layer F.SilkS) (width 0.12) (tstamp 5E3FD574))
(gr_line (start 75 81) (end 75 82.5) (layer F.SilkS) (width 0.12))
(gr_line (start 70.25 81) (end 75 81) (layer F.SilkS) (width 0.12))
(gr_line (start 70.25 82.5) (end 70.25 81) (layer F.SilkS) (width 0.12))
(gr_line (start 72.5 82.5) (end 70.25 82.5) (layer F.SilkS) (width 0.12))
(gr_line (start 74.5 82.5) (end 75.25 83) (layer F.SilkS) (width 0.12))
(gr_line (start 72.5 82.5) (end 74.5 82.5) (layer F.SilkS) (width 0.12))
(gr_line (start 72.5 93) (end 72 93) (layer F.SilkS) (width 0.12) (tstamp 5E3FD50E))
(gr_line (start 72.5 96) (end 72.5 93) (layer F.SilkS) (width 0.12))
(gr_line (start 68 96) (end 72.5 96) (layer F.SilkS) (width 0.12))
(gr_line (start 68 93) (end 68 96) (layer F.SilkS) (width 0.12))
(gr_line (start 67 93) (end 67.25 93) (layer F.SilkS) (width 0.12) (tstamp 5E3FD50D))
(gr_line (start 67 89) (end 67 93) (layer F.SilkS) (width 0.12))
(gr_line (start 68.25 89) (end 67 89) (layer F.SilkS) (width 0.12))
(gr_line (start 71.5 89) (end 71.25 89) (layer F.SilkS) (width 0.12))
(gr_line (start 71.5 89.25) (end 71.5 89) (layer F.SilkS) (width 0.12))
(gr_line (start 71.5 93) (end 71.5 89.25) (layer F.SilkS) (width 0.12))
(gr_line (start 67.25 93) (end 72 93) (layer F.SilkS) (width 0.12))
(gr_line (start 81.75 93.25) (end 81.75 88.25) (layer F.SilkS) (width 0.12))
(gr_line (start 78.75 93.25) (end 81.75 93.25) (layer F.SilkS) (width 0.12))
(gr_line (start 78.75 88.25) (end 78.75 93.25) (layer F.SilkS) (width 0.12))
(gr_line (start 82.25 84.25) (end 78.25 84.25) (layer F.SilkS) (width 0.12))
(gr_line (start 82.25 88.25) (end 82.25 84.25) (layer F.SilkS) (width 0.12))
(gr_line (start 78.25 88.25) (end 82.25 88.25) (layer F.SilkS) (width 0.12))
(gr_line (start 78.25 84.25) (end 78.25 88.25) (layer F.SilkS) (width 0.12))
(gr_line (start 72 108.25) (end 72 104.25) (layer F.SilkS) (width 0.12) (tstamp 5E3FD2AD))
(gr_line (start 70.5 108.25) (end 72 108.25) (layer F.SilkS) (width 0.12))
(gr_line (start 70.5 104.25) (end 70.5 108.25) (layer F.SilkS) (width 0.12))
(gr_line (start 72 104.25) (end 70.5 104.25) (layer F.SilkS) (width 0.12))
(gr_line (start 73 103.25) (end 72 104.25) (layer F.SilkS) (width 0.12))
(gr_line (start 73 100.25) (end 73 100.5) (layer F.SilkS) (width 0.12) (tstamp 5E3FD2AC))
(gr_line (start 74.5 100.25) (end 73 100.25) (layer F.SilkS) (width 0.12))
(gr_line (start 74.5 103.25) (end 74.5 100.25) (layer F.SilkS) (width 0.12))
(gr_line (start 73 103.25) (end 74.5 103.25) (layer F.SilkS) (width 0.12))
(gr_line (start 73 103) (end 73 103.25) (layer F.SilkS) (width 0.12))
(gr_line (start 73 100.5) (end 73 103) (layer F.SilkS) (width 0.12))
(gr_line (start 78 103.25) (end 75 103.25) (layer F.SilkS) (width 0.12))
(gr_line (start 78 99.75) (end 78 103.25) (layer F.SilkS) (width 0.12))
(gr_line (start 77.75 99.75) (end 78 99.75) (layer F.SilkS) (width 0.12))
(gr_line (start 75 99.75) (end 77.75 99.75) (layer F.SilkS) (width 0.12))
(gr_line (start 75 100.25) (end 75 99.75) (layer F.SilkS) (width 0.12))
(gr_line (start 75 107.25) (end 75 100.25) (layer F.SilkS) (width 0.12))
(gr_line (start 74.5 108.25) (end 75 107.25) (layer F.SilkS) (width 0.12))
(gr_line (start 78.5 111.25) (end 78.25 111.25) (layer F.SilkS) (width 0.12) (tstamp 5E3FD278))
(gr_line (start 78.5 108.25) (end 78.5 111.25) (layer F.SilkS) (width 0.12))
(gr_line (start 74.5 108.25) (end 78.5 108.25) (layer F.SilkS) (width 0.12))
(gr_line (start 74.5 111.25) (end 74.5 108.25) (layer F.SilkS) (width 0.12))
(gr_line (start 78.25 111.25) (end 74.5 111.25) (layer F.SilkS) (width 0.12))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(gr_text !230VAC! (at 90.75 17.25) (layer F.SilkS)
(effects (font (size 1.5 1.5) (thickness 0.15)))
)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(gr_text v1.2 (at 34.5 44) (layer B.Mask)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(effects (font (size 1.5 1.5) (thickness 0.3)) (justify mirror))
)
(gr_line (start 33.5 68) (end 33.5 77) (layer F.SilkS) (width 0.12))
(gr_line (start 34 67.5) (end 33.5 68) (layer F.SilkS) (width 0.12))
(gr_line (start 34 65.5) (end 34 67.5) (layer F.SilkS) (width 0.12))
(gr_line (start 30 66.5) (end 30 57.5) (layer F.SilkS) (width 0.12) (tstamp 5E0FCADD))
(gr_line (start 34 66.5) (end 30 66.5) (layer F.SilkS) (width 0.12) (tstamp 5E0FCADA))
(gr_line (start 34 57.5) (end 34 66.5) (layer F.SilkS) (width 0.12) (tstamp 5E0FCAD7))
(gr_line (start 30 57.5) (end 34 57.5) (layer F.SilkS) (width 0.12) (tstamp 5E0FCAD4))
(gr_arc (start 17.5 108.5) (end 18 108.5) (angle -90) (layer Edge.Cuts) (width 0.05))
(gr_arc (start 17.5 17.5) (end 17.5 18) (angle -90) (layer Edge.Cuts) (width 0.05))
(gr_line (start 18 17.5) (end 18 13) (layer Edge.Cuts) (width 0.05) (tstamp 5E017CD8))
(gr_line (start 16 18) (end 17.5 18) (layer Edge.Cuts) (width 0.05))
(gr_line (start 16 108) (end 16 18) (layer Edge.Cuts) (width 0.05))
(gr_line (start 17.5 108) (end 16 108) (layer Edge.Cuts) (width 0.05))
(gr_line (start 18 113) (end 18 108.5) (layer Edge.Cuts) (width 0.05))
(gr_line (start 13.5 14.5) (end 13.5 115) (layer Dwgs.User) (width 0.15))
(gr_poly (pts (xy 98 15) (xy 18 15) (xy 18 13) (xy 98 13)) (layer Cmts.User) (width 0.1) (tstamp 5E00D0A3))
(gr_poly (pts (xy 98 113) (xy 18 113) (xy 18 111) (xy 98 111)) (layer Cmts.User) (width 0.1))
(gr_line (start 15 18) (end 101 18) (layer Dwgs.User) (width 0.15))
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(gr_line (start 18 108) (end 100 108) (layer Dwgs.User) (width 0.15) (tstamp 5E3D3F26))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(gr_line (start 18 108) (end 13.5 108) (layer Dwgs.User) (width 0.15))
(gr_line (start 98 13) (end 18 13) (layer Edge.Cuts) (width 0.05) (tstamp 5DEF2EDE))
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(gr_line (start 98 113) (end 98 18) (layer Edge.Cuts) (width 0.05))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(gr_line (start 18 113) (end 98 113) (layer Edge.Cuts) (width 0.05))
Add vias to erath net
2020-02-18 20:45:31 +01:00
(via (at 23.5 112) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 1))
(via (at 74.75 112) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 1))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(segment (start 97.25 96.75) (end 91.5 102.5) (width 0.3) (layer B.Cu) (net 1) (status 20))
(segment (start 97 88) (end 97.25 87.75) (width 0.3) (layer B.Cu) (net 1))
(segment (start 22.5 19.1) (end 22.5 16.5) (width 0.3) (layer F.Cu) (net 1))
(segment (start 96.75 14) (end 73 14) (width 0.3) (layer B.Cu) (net 1))
(segment (start 22.5 14) (end 20.25 14) (width 0.3) (layer B.Cu) (net 1))
(segment (start 97.375 14.625) (end 96.875 14.125) (width 0.3) (layer B.Cu) (net 1))
(segment (start 97.47499 14.72499) (end 97.375 14.625) (width 0.6) (layer B.Cu) (net 1))
(segment (start 23.5 14) (end 22.5 14) (width 0.3) (layer B.Cu) (net 1) (tstamp 5E0294E1))
(via (at 23.5 14) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 1))
(segment (start 31 14) (end 23.5 14) (width 0.3) (layer B.Cu) (net 1) (tstamp 5E0294E3))
(via (at 31 14) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 1))
(segment (start 66 14) (end 31 14) (width 0.3) (layer B.Cu) (net 1) (tstamp 5E0294E5))
(via (at 66 14) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 1))
(segment (start 73 14) (end 66 14) (width 0.3) (layer B.Cu) (net 1) (tstamp 5E0294E7))
(via (at 73 14) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 1))
(segment (start 96.875 14.125) (end 96.75 14) (width 0.3) (layer B.Cu) (net 1) (tstamp 5E0294E9))
(via (at 96.875 14.125) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 1))
(segment (start 22.5 16) (end 22.5 19.1) (width 0.6) (layer F.Cu) (net 1))
(segment (start 22.5 16.5) (end 22.5 16) (width 0.6) (layer F.Cu) (net 1))
(segment (start 22.5 16) (end 22.5 14.5) (width 0.6) (layer F.Cu) (net 1))
(segment (start 22.5 14.5) (end 23 14.5) (width 0.6) (layer F.Cu) (net 1))
(segment (start 23 14.5) (end 23.5 14) (width 0.6) (layer F.Cu) (net 1))
(segment (start 22.5 19.1) (end 26.5 19.1) (width 0.6) (layer F.Cu) (net 1) (status 20))
(segment (start 97 97) (end 97 90.92) (width 0.6) (layer F.Cu) (net 1))
(segment (start 91.5 102.5) (end 97 97) (width 0.6) (layer F.Cu) (net 1) (status 10))
(segment (start 97 88) (end 91.5 88) (width 0.6) (layer F.Cu) (net 1) (status 20))
(segment (start 97 90.92) (end 97 88) (width 0.6) (layer F.Cu) (net 1))
(via (at 40 112) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 1))
(via (at 57.5 112) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 1))
(via (at 85 112) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 1))
(segment (start 91.5 107.025483) (end 91.5 111.5) (width 2) (layer B.Cu) (net 1))
(segment (start 91.5 102.5) (end 91.5 107.025483) (width 2) (layer B.Cu) (net 1) (status 10))
(segment (start 91.5 102.5) (end 91.5 111.5) (width 2) (layer F.Cu) (net 1) (status 10))
(segment (start 22.5 19.7125) (end 22.5 19.1) (width 0.6) (layer F.Cu) (net 1) (status 10))
(segment (start 86.9 102.5) (end 91.5 102.5) (width 0.6) (layer F.Cu) (net 1) (status 30))
(segment (start 96.5 97.5) (end 96.5 88) (width 2) (layer B.Cu) (net 1))
(segment (start 91.5 102.5) (end 96.5 97.5) (width 2) (layer B.Cu) (net 1) (status 10))
(segment (start 96.5 88) (end 97 88) (width 0.3) (layer B.Cu) (net 1))
(segment (start 96.5 88) (end 91.5 88) (width 2) (layer B.Cu) (net 1) (status 20))
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
(segment (start 91.45 102.45) (end 91.5 102.5) (width 1) (layer F.Cu) (net 1))
(segment (start 60 14) (end 66 14) (width 1) (layer F.Cu) (net 1))
(segment (start 30 14) (end 31 14) (width 1) (layer F.Cu) (net 1))
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(segment (start 38.5 110.5) (end 40 112) (width 0.3) (layer F.Cu) (net 1))
(segment (start 38.5 110.475) (end 38.5 110.5) (width 0.3) (layer F.Cu) (net 1))
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(segment (start 91 30.5) (end 97.27499 30.5) (width 1) (layer B.Cu) (net 1))
(segment (start 97.5 87) (end 97.5 31) (width 0.4) (layer B.Cu) (net 1))
(segment (start 96.5 88) (end 97.5 87) (width 0.4) (layer B.Cu) (net 1))
(segment (start 97.27499 30.5) (end 97.27499 31) (width 1) (layer B.Cu) (net 1))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(segment (start 88.5 105.5) (end 91.5 102.5) (width 0.6) (layer F.Cu) (net 1))
(segment (start 87.225 105.5) (end 88.5 105.5) (width 0.6) (layer F.Cu) (net 1))
(segment (start 30 14) (end 30 17.275) (width 1) (layer B.Cu) (net 1))
(segment (start 31 14) (end 30 14) (width 1) (layer B.Cu) (net 1))
(segment (start 72.5 14.5) (end 73 14) (width 1) (layer B.Cu) (net 1))
(segment (start 72.5 28.25) (end 72.5 14.5) (width 1) (layer B.Cu) (net 1))
(segment (start 86.982234 28.25) (end 72.5 28.25) (width 1) (layer B.Cu) (net 1))
(segment (start 89.232234 30.5) (end 86.982234 28.25) (width 1) (layer B.Cu) (net 1))
(segment (start 91 30.5) (end 89.232234 30.5) (width 1) (layer B.Cu) (net 1))
(via (at 26.5 44) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
(via (at 28 44) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
(via (at 29.5 44) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
(via (at 29.5 45.5) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
(via (at 28 45.5) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
(via (at 26.5 45.5) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
remove selectable voltage level for level shifter on LCB bus. This does not work
2020-02-18 20:12:22 +01:00
(via (at 30.75 104.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 29.75 105.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(via (at 71.5 103.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 71.5 105.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 68.5 105.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 69.75 106.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 65.75 106.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 62.25 106.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 62.25 108) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(via (at 65.75 100.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(via (at 43.25 54.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(via (at 34 78) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 34 80) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 26.54 21.94) (end 26.5 21.9) (width 1) (layer F.Cu) (net 2) (status 30))
(segment (start 26.5 21.9) (end 22.5 21.9) (width 1) (layer F.Cu) (net 2) (status 10))
(segment (start 77.5625 71.5425) (end 76.22 70.2) (width 1) (layer F.Cu) (net 2) (status 20))
(segment (start 77.5625 73) (end 77.5625 71.5425) (width 1) (layer F.Cu) (net 2) (status 10))
(segment (start 75.92 69.9) (end 76.22 70.2) (width 1) (layer F.Cu) (net 2) (status 30))
(via (at 52.56 107.51) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 52.5 106.2875) (end 52.5 107.45) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 52.5 107.45) (end 52.56 107.51) (width 0.3) (layer F.Cu) (net 2))
(segment (start 46.5 104.3) (end 46.5 104.18) (width 0.3) (layer F.Cu) (net 2) (status 30))
(segment (start 46.5 104.18) (end 47 103.68) (width 0.3) (layer F.Cu) (net 2) (status 10))
Move vias to better locations: These vias have proven unfortunately placed for hand soldering
2020-02-05 22:12:31 +01:00
(via (at 50 97.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(segment (start 50.51 97.74) (end 50.21 97.74) (width 0.3) (layer F.Cu) (net 2))
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(segment (start 52 101.675) (end 52 99.5) (width 0.3) (layer F.Cu) (net 2) (status 10))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(segment (start 52 99.23) (end 50.51 97.74) (width 0.3) (layer F.Cu) (net 2))
(segment (start 51.4725 97.74) (end 51.5 97.7125) (width 0.3) (layer B.Cu) (net 2) (status 30))
(segment (start 50.21 97.74) (end 51.4725 97.74) (width 0.3) (layer B.Cu) (net 2) (status 20))
(via (at 66 53) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 67 53) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 68 53) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 68 57) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 67 57) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 66 57) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 39.5 59.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 35.5 59.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 26.5 60.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 45 59.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 45 62.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 35.5 62.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 26.5 64) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 50.2325 79.945) (end 50 79.7125) (width 0.3) (layer F.Cu) (net 2) (status 30))
(segment (start 52.85 79.945) (end 50.2325 79.945) (width 0.3) (layer F.Cu) (net 2) (status 30))
(via (at 60.35 81.19) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 62.15 81.215) (end 60.375 81.215) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 60.375 81.215) (end 60.35 81.19) (width 0.3) (layer F.Cu) (net 2))
(via (at 60 70) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 67.94 80.65) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 67.95 79.5) (end 67.95 80.64) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 67.95 80.64) (end 67.94 80.65) (width 0.3) (layer F.Cu) (net 2))
(segment (start 39.2875 99.5) (end 38.5 98.7125) (width 0.3) (layer F.Cu) (net 2) (status 20))
(segment (start 40.825 99.5) (end 39.2875 99.5) (width 0.3) (layer F.Cu) (net 2) (status 10))
Move vias to better locations: These vias have proven unfortunately placed for hand soldering
2020-02-05 22:12:31 +01:00
(via (at 46.75 99.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(segment (start 47 101.675) (end 47 100.04) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 47 100.04) (end 46.35 99.39) (width 0.3) (layer F.Cu) (net 2))
Move vias to better locations: These vias have proven unfortunately placed for hand soldering
2020-02-05 22:12:31 +01:00
(via (at 46 100) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2) (tstamp 5E3B72CF))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(segment (start 47 103.1) (end 47 103.43) (width 0.3) (layer F.Cu) (net 2))
(segment (start 47 103.1) (end 47 101.675) (width 0.3) (layer F.Cu) (net 2) (status 20))
(segment (start 47 103.68) (end 47 103.1) (width 0.3) (layer F.Cu) (net 2))
(via (at 65.75 98.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 60 94) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 32.48 97.98) (end 32.5 97.96) (width 0.3) (layer F.Cu) (net 2) (status 30))
(via (at 37 83.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 37 84.9) (end 37 83.75) (width 0.6) (layer F.Cu) (net 2) (status 10))
(via (at 37 86.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 37 84.9) (end 37 86.25) (width 0.6) (layer F.Cu) (net 2) (status 10))
(via (at 39.5 74) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 40 73.135) (end 40 73.4) (width 0.3) (layer F.Cu) (net 2) (status 30))
(segment (start 43 84.575) (end 41.925 83.5) (width 0.3) (layer F.Cu) (net 2) (status 20))
(segment (start 43 86.325) (end 43 84.575) (width 0.3) (layer F.Cu) (net 2) (status 10))
(via (at 41.9 82.2) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 41.925 83.5) (end 41.925 82.225) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 41.925 82.225) (end 41.9 82.2) (width 0.3) (layer F.Cu) (net 2))
(via (at 39.86 86.21) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 37 84.9) (end 38.55 84.9) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 38.55 84.9) (end 39.86 86.21) (width 0.3) (layer F.Cu) (net 2))
(via (at 25 76.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 29 66) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 58.31 100.56) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 56.175 99.5) (end 57.25 99.5) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 57.25 99.5) (end 58.31 100.56) (width 0.3) (layer F.Cu) (net 2))
(via (at 42.63 96.96) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 40.825 97) (end 42.59 97) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 42.59 97) (end 42.63 96.96) (width 0.3) (layer F.Cu) (net 2))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(via (at 43.25 53.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 43.25 52.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(via (at 93 77.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 61.7875 100.5) (end 61.14375 99.85625) (width 0.3) (layer F.Cu) (net 2))
(segment (start 61.7875 101) (end 61.7875 100.5) (width 0.3) (layer F.Cu) (net 2) (status 10))
(via (at 39.75 103.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 39.75 101) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 43.04 99.13) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 40.825 99.5) (end 42.67 99.5) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 42.67 99.5) (end 43.04 99.13) (width 0.3) (layer F.Cu) (net 2))
(via (at 73 53) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
(via (at 73 59) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
(via (at 41.5 56) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
(via (at 47.5 89.77) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
(via (at 47 95) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
Move vias to better locations: These vias have proven unfortunately placed for hand soldering
2020-02-05 22:12:31 +01:00
(via (at 52.25 94) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(via (at 44 98) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
(segment (start 73.9375 53.9375) (end 73 53) (width 0.3) (layer F.Cu) (net 2))
(segment (start 73.9375 56) (end 73.9375 53.9375) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 73 56.9375) (end 73.9375 56) (width 0.3) (layer F.Cu) (net 2) (status 20))
(segment (start 73 59) (end 73 56.9375) (width 0.3) (layer F.Cu) (net 2))
(via (at 34.18 72.45) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 32.7875 72.5) (end 34.13 72.5) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 34.13 72.5) (end 34.18 72.45) (width 0.3) (layer F.Cu) (net 2))
(via (at 24 82) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 22 86) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 25 86) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 63 90) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 40.825 97) (end 39 97) (width 0.25) (layer F.Cu) (net 2) (status 10))
(segment (start 38.5 97.5) (end 38.5 98.7125) (width 0.25) (layer F.Cu) (net 2) (status 20))
(segment (start 39 97) (end 38.5 97.5) (width 0.25) (layer F.Cu) (net 2))
(segment (start 62.25 90.75) (end 63 90) (width 0.3) (layer B.Cu) (net 2) (status 10))
(segment (start 62.25 90.9625) (end 62.25 90.75) (width 0.3) (layer B.Cu) (net 2) (status 30))
(segment (start 61.14375 99.85625) (end 60.2875 99) (width 0.3) (layer F.Cu) (net 2) (tstamp 5E02B2E8) (status 20))
(via (at 61.14375 99.85625) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 48 84.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 49.5 84.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 93 77.5) (end 94.4 77.5) (width 0.6) (layer F.Cu) (net 2) (status 20))
(via (at 25 74) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 25 72) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 19.5 72) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 19.5 74) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 17.9 66.3) (end 19.8 66.3) (width 0.3) (layer F.Cu) (net 2) (status 10))
(via (at 20 66.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 19.8 66.3) (end 20 66.5) (width 0.3) (layer F.Cu) (net 2))
(via (at 19 80.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 17.9 81.8) (end 17.9 80.9) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 18.3 80.5) (end 19 80.5) (width 0.3) (layer F.Cu) (net 2))
(segment (start 17.9 80.9) (end 18.3 80.5) (width 0.3) (layer F.Cu) (net 2))
(via (at 24.5 70.5) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
(segment (start 24.8 70.8) (end 24.5 70.5) (width 0.6) (layer F.Cu) (net 2))
(segment (start 28 70.8) (end 24.8 70.8) (width 0.6) (layer F.Cu) (net 2) (status 10))
(via (at 31 54.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 29.7875 54.5) (end 31 54.5) (width 0.3) (layer F.Cu) (net 2) (status 10))
(segment (start 59.26251 89.49999) (end 58.999083 89.49999) (width 0.3) (layer F.Cu) (net 2))
(via (at 58.999083 89.49999) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 22.5 21.9) (end 22.5 21.2875) (width 0.6) (layer F.Cu) (net 2) (status 20))
(via (at 48.5 108) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 50.5 108) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 29 77.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 29 82.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 25 80.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 46.0875 104.7125) (end 46.5 104.3) (width 0.6) (layer F.Cu) (net 2) (status 30))
(segment (start 44.5 104.7125) (end 46.0875 104.7125) (width 0.6) (layer F.Cu) (net 2) (status 30))
(segment (start 52.0875 106.7) (end 52.5 106.2875) (width 0.6) (layer F.Cu) (net 2) (status 20))
(segment (start 50.5 106.7) (end 52.0875 106.7) (width 0.6) (layer F.Cu) (net 2) (status 10))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(via (at 65.75 108) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(via (at 82.5 102.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(segment (start 61 102.2625) (end 61 104.5) (width 0.25) (layer F.Cu) (net 2))
(segment (start 61.7875 101) (end 61.7875 101.475) (width 0.25) (layer F.Cu) (net 2) (status 10))
(segment (start 61.7875 101.475) (end 61 102.2625) (width 0.25) (layer F.Cu) (net 2))
(segment (start 65.32501 94.92499) (end 65.32501 91.31501) (width 0.25) (layer F.Cu) (net 2))
(segment (start 65.25 95) (end 65.32501 94.92499) (width 0.25) (layer F.Cu) (net 2))
(segment (start 64.01 90) (end 63 90) (width 0.25) (layer F.Cu) (net 2))
(segment (start 65.32501 91.31501) (end 64.01 90) (width 0.25) (layer F.Cu) (net 2))
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(via (at 65.75 104.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2) (tstamp 5E0F966B))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(via (at 60 74.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 65.5 95.25) (end 65.25 95) (width 0.25) (layer F.Cu) (net 2))
(segment (start 65.5 95.57) (end 65.5 95.25) (width 0.25) (layer F.Cu) (net 2))
(via (at 58.01 92.54) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 61.59 85.92) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 44.99 87.73) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 43.08 87.73) (end 44.636447 87.73) (width 0.25) (layer F.Cu) (net 2))
(segment (start 44.636447 87.73) (end 44.99 87.73) (width 0.25) (layer F.Cu) (net 2))
(segment (start 43 86.325) (end 43 87.65) (width 0.25) (layer F.Cu) (net 2) (status 10))
(segment (start 43 87.65) (end 43.08 87.73) (width 0.25) (layer F.Cu) (net 2))
Move vias to better locations: These vias have proven unfortunately placed for hand soldering
2020-02-05 22:12:31 +01:00
(via (at 50 96.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(via (at 21.5 109) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 36.5 110.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(via (at 23 104) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 25 87) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 22 87) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 45.5 91.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 44.25 94.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 44 92.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 34.999992 83.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 35.85 83.75) (end 34.999992 83.75) (width 0.6) (layer F.Cu) (net 2))
(segment (start 37 84.9) (end 35.85 83.75) (width 0.6) (layer F.Cu) (net 2) (status 10))
(via (at 34.75 91.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 33.66 91.5) (end 32.5 90.34) (width 0.6) (layer F.Cu) (net 2) (status 20))
(segment (start 34.75 91.5) (end 33.66 91.5) (width 0.6) (layer F.Cu) (net 2))
(via (at 38.25 93.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 36.75 90.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(via (at 56.5 107) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(via (at 56.5 108.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 60.5 83.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 63.5 82.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 40.25 109) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 26.5 88) (end 26.5 87) (width 0.3) (layer B.Cu) (net 2))
(segment (start 26.5 87) (end 25 87) (width 0.3) (layer B.Cu) (net 2))
(segment (start 50 79.7125) (end 50 78.5) (width 0.3) (layer F.Cu) (net 2))
(via (at 50 78.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 50 72.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 50.175 72.325) (end 50 72.5) (width 0.3) (layer F.Cu) (net 2))
(segment (start 52.85 72.325) (end 50.175 72.325) (width 0.3) (layer F.Cu) (net 2))
(segment (start 50.215 69.785) (end 50 70) (width 0.3) (layer F.Cu) (net 2))
(segment (start 52.85 69.785) (end 50.215 69.785) (width 0.3) (layer F.Cu) (net 2))
(via (at 50 70) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 41.749984 107.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 41.64 107.640016) (end 41.749984 107.75) (width 0.3) (layer F.Cu) (net 2))
(segment (start 41.64 106.3975) (end 41.64 107.640016) (width 0.3) (layer F.Cu) (net 2))
(via (at 39.5 75.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 35.5 64.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 37.5 64.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 37.5 62.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 40.25 62.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 40.25 64.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Improve layout, change color of B.Silk and improve schematic
2020-01-12 14:56:58 +01:00
(segment (start 56.175 99.5) (end 53.5 99.5) (width 0.25) (layer F.Cu) (net 2))
(segment (start 51.74 97.74) (end 50.21 97.74) (width 0.25) (layer F.Cu) (net 2))
(segment (start 53.5 99.5) (end 51.74 97.74) (width 0.25) (layer F.Cu) (net 2))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(via (at 56.55 85.01) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Improve layout, change color of B.Silk and improve schematic
2020-01-12 14:56:58 +01:00
(via (at 58.5 85.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 52 109.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 48 109.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
(segment (start 77.4625 73.1) (end 77.5625 73) (width 0.6) (layer F.Cu) (net 2))
(segment (start 75.05 73.1) (end 77.4625 73.1) (width 0.6) (layer F.Cu) (net 2))
(segment (start 79.9125 75.35) (end 77.5625 73) (width 0.6) (layer F.Cu) (net 2))
(segment (start 80.75 75.35) (end 79.9125 75.35) (width 0.6) (layer F.Cu) (net 2))
(via (at 74.5 75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 75.05 73.1) (end 75.05 74.45) (width 0.6) (layer F.Cu) (net 2))
(segment (start 75.05 74.45) (end 74.5 75) (width 0.6) (layer F.Cu) (net 2))
(via (at 75.75 75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 74.5 75) (end 75.75 75) (width 0.6) (layer B.Cu) (net 2))
(segment (start 75.05 74.3) (end 75.75 75) (width 0.6) (layer F.Cu) (net 2))
(segment (start 75.05 73.1) (end 75.05 74.3) (width 0.6) (layer F.Cu) (net 2))
(via (at 82.75 75.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 80.75 75.35) (end 82.6 75.35) (width 0.6) (layer F.Cu) (net 2))
(segment (start 82.6 75.35) (end 82.75 75.5) (width 0.6) (layer F.Cu) (net 2))
Move vias to better locations: These vias have proven unfortunately placed for hand soldering
2020-02-05 22:12:31 +01:00
(via (at 71.75 75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 74.5 76.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 75.75 76.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(segment (start 84.6 75.5) (end 84.75 75.35) (width 0.4) (layer F.Cu) (net 2))
(segment (start 82.75 75.5) (end 84.6 75.5) (width 0.4) (layer F.Cu) (net 2))
(via (at 80 85) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 2))
(segment (start 80 83.25) (end 80 85) (width 0.4) (layer F.Cu) (net 2))
(via (at 78.25 96.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 79.7 96.25) (end 78.25 96.25) (width 0.4) (layer F.Cu) (net 2))
(segment (start 77.7875 96.7125) (end 78.25 96.25) (width 0.4) (layer B.Cu) (net 2))
(segment (start 77.7875 97.5) (end 77.7875 96.7125) (width 0.4) (layer B.Cu) (net 2))
(via (at 71.75 92.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 71.75 93.7125) (end 71.75 92.75) (width 0.3) (layer F.Cu) (net 2))
(segment (start 70.25 93.7125) (end 71.75 93.7125) (width 0.3) (layer F.Cu) (net 2))
(segment (start 65.75 95.82) (end 65.5 95.57) (width 0.3) (layer F.Cu) (net 2))
(segment (start 65.75 98.5) (end 65.75 95.82) (width 0.3) (layer F.Cu) (net 2))
(via (at 81.25 96.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 79.7 96.25) (end 81.25 96.25) (width 0.3) (layer F.Cu) (net 2))
(via (at 82.5 90) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 82.5 90.9625) (end 82.5 90) (width 0.3) (layer F.Cu) (net 2))
(segment (start 82.7125 96.25) (end 81.25 96.25) (width 0.3) (layer F.Cu) (net 2))
(segment (start 83 95.9625) (end 82.7125 96.25) (width 0.3) (layer F.Cu) (net 2))
(segment (start 77.75 97.5375) (end 77.7875 97.5) (width 0.3) (layer B.Cu) (net 2))
(segment (start 77.75 99.25) (end 77.75 97.5375) (width 0.3) (layer B.Cu) (net 2))
(segment (start 77.5375 107.5) (end 77.5375 105.5) (width 0.3) (layer F.Cu) (net 2) (tstamp 5E3D3EF3))
(via (at 78.75 105.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2) (tstamp 5E3D3EF0))
(segment (start 77.5375 105.5) (end 78.75 105.5) (width 0.3) (layer F.Cu) (net 2) (tstamp 5E3D3EE1))
(segment (start 81.5 89) (end 82.5 90) (width 0.3) (layer F.Cu) (net 2))
(segment (start 81.0375 89) (end 81.5 89) (width 0.3) (layer F.Cu) (net 2))
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(via (at 77.75 83.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Rework stability compensation of opamp
2020-02-06 21:36:27 +01:00
(via (at 78 90) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 78.5 100.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 75 103.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 52.5 55.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 53.7125 55.5) (end 52.5 55.5) (width 0.3) (layer F.Cu) (net 2))
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(segment (start 52 99.5) (end 52 99.23) (width 0.3) (layer F.Cu) (net 2) (tstamp 5E40594B) (status 10))
(via (at 52 99.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 68.5 91) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 66.5 91) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 77.1 94.1) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 43.7 107.8) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 43.3 104.2) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(via (at 62.249988 104.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 61 104.5) (end 62.249988 104.5) (width 0.4) (layer F.Cu) (net 2))
(via (at 73 99.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 75 99.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 37.5 103.65) (end 37.5 102.25) (width 0.3) (layer F.Cu) (net 2))
(via (at 36.75 101.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 37.5 102.25) (end 36.75 101.5) (width 0.3) (layer F.Cu) (net 2))
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(segment (start 50.31 72.81) (end 50 72.5) (width 0.3) (layer B.Cu) (net 2))
(segment (start 51.23 72.81) (end 50.31 72.81) (width 0.3) (layer B.Cu) (net 2))
(segment (start 47.195 83.695) (end 48 84.5) (width 0.3) (layer B.Cu) (net 2))
(segment (start 47.195 82.12) (end 47.195 83.695) (width 0.3) (layer B.Cu) (net 2))
(segment (start 53.15 79.645) (end 54.395 79.645) (width 0.3) (layer F.Cu) (net 2))
(segment (start 52.85 79.945) (end 53.15 79.645) (width 0.3) (layer F.Cu) (net 2))
(via (at 55.02 79.02) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 54.395 79.645) (end 55.02 79.02) (width 0.3) (layer F.Cu) (net 2))
(via (at 46.57 72.85) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 53.46 84.72) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 52.18 88.45) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 52.62 91.26) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(segment (start 52 101.675) (end 52 103.351004) (width 0.25) (layer F.Cu) (net 2))
(segment (start 52 103.351004) (end 52.473998 103.825002) (width 0.25) (layer F.Cu) (net 2))
(segment (start 52.473998 103.825002) (end 52.856496 103.825002) (width 0.25) (layer F.Cu) (net 2))
(segment (start 52.856496 103.825002) (end 53.56 104.528506) (width 0.25) (layer F.Cu) (net 2))
(segment (start 53.56 104.528506) (end 53.56 105.2275) (width 0.25) (layer F.Cu) (net 2))
(segment (start 53.56 105.2275) (end 52.5 106.2875) (width 0.25) (layer F.Cu) (net 2))
(segment (start 51.7875 99.7125) (end 52 99.5) (width 0.3) (layer B.Cu) (net 2))
(segment (start 50.75 99.7125) (end 51.7875 99.7125) (width 0.3) (layer B.Cu) (net 2))
(segment (start 19.5 28.1) (end 21.1 26.5) (width 1) (layer F.Cu) (net 2))
(segment (start 34.4 26.5) (end 34.5 26.6) (width 1) (layer F.Cu) (net 2))
(segment (start 21.1 26.5) (end 32 26.5) (width 1) (layer F.Cu) (net 2))
(segment (start 38.1 23) (end 34.5 26.6) (width 1) (layer F.Cu) (net 2))
(segment (start 42.25 23) (end 38.1 23) (width 1) (layer F.Cu) (net 2))
(via (at 37 35) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 36.9 34.9) (end 37 35) (width 1) (layer F.Cu) (net 2))
(segment (start 34.5 34.9) (end 36.9 34.9) (width 1) (layer F.Cu) (net 2))
(via (at 37 26.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 37 35) (end 37 34) (width 1) (layer B.Cu) (net 2))
(segment (start 34.6 26.5) (end 34.5 26.6) (width 1) (layer F.Cu) (net 2))
(segment (start 37 26.5) (end 34.6 26.5) (width 1) (layer F.Cu) (net 2))
(segment (start 30.1 34.9) (end 32.1 34.9) (width 2) (layer F.Cu) (net 2))
(segment (start 29.5 35.5) (end 30.1 34.9) (width 2) (layer F.Cu) (net 2))
(segment (start 27.0625 42) (end 29.5 42) (width 2) (layer F.Cu) (net 2))
(segment (start 29.5 42) (end 29.5 35.5) (width 2) (layer F.Cu) (net 2))
(segment (start 29.5 45.5) (end 29.5 42) (width 2) (layer F.Cu) (net 2))
(segment (start 22.5 21.2875) (end 22.5 25.5) (width 1) (layer F.Cu) (net 2))
(via (at 70 44) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 67.5 45.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 77.5 55.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 80 54) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 75.1 70.2) (end 74.4 69.5) (width 0.6) (layer F.Cu) (net 2))
(segment (start 76.22 70.2) (end 75.1 70.2) (width 0.6) (layer F.Cu) (net 2))
(via (at 17.5 25.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 18.5 25.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 19.5 25.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 20.5 25.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 17.5 36) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 18.5 36) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 19.5 36) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 20.5 36) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 25 36) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 26 36) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 27 36) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 28 36) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 44.5 36) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 43.5 36) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 42.5 36) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 41.5 36) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 39.5 44) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 42.5 44) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 42.5 45) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 39.5 45) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 71 75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 71.5 90.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 82 85) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 32 26.5) (end 34.4 26.5) (width 1) (layer F.Cu) (net 2) (tstamp 5EC23B82))
(via (at 32 26.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 32 27.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 37 27.5) (end 37 26.5) (width 1) (layer B.Cu) (net 2) (tstamp 5EC23B84))
(via (at 37 27.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 37 34) (end 37 27.5) (width 1) (layer B.Cu) (net 2) (tstamp 5EC23B86))
(via (at 37 34) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 32.1 34.9) (end 34.5 34.9) (width 2) (layer F.Cu) (net 2) (tstamp 5EC23B88))
(via (at 32.1 34.9) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(via (at 44.5 31) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 2))
(segment (start 30 19.5) (end 30 26) (width 1) (layer B.Cu) (net 2))
(segment (start 30 19.5) (end 30 18.725) (width 0.4) (layer B.Cu) (net 2))
(via (at 39.25 83.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 3))
(via (at 40.25 83.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 3))
(via (at 40.25 84.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 3))
(via (at 39.25 84.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 3))
(via (at 39.75 84) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 3))
(segment (start 51.5 101.675) (end 51.5 100.39) (width 0.3) (layer F.Cu) (net 3) (status 10))
(segment (start 56.175 99) (end 54.99 99) (width 0.3) (layer F.Cu) (net 3) (status 10))
(via (at 48.48 93.76) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 3))
(segment (start 48.48 92.38) (end 48.48 93.76) (width 0.6) (layer B.Cu) (net 3))
(segment (start 51.5 100.39) (end 49.74 98.55) (width 0.3) (layer F.Cu) (net 3))
(segment (start 57.675 86.5) (end 56.175 88) (width 0.3) (layer F.Cu) (net 3) (status 20))
(segment (start 58.2125 86.5) (end 57.675 86.5) (width 0.3) (layer F.Cu) (net 3) (status 10))
(segment (start 42.5 86.325) (end 42.5 85.5) (width 0.3) (layer F.Cu) (net 3) (status 10))
(segment (start 42.5 85.5) (end 42 85) (width 0.3) (layer F.Cu) (net 3))
(segment (start 38.7875 100) (end 38.5 100.2875) (width 0.3) (layer F.Cu) (net 3) (status 30))
(segment (start 40.825 100) (end 38.7875 100) (width 0.3) (layer F.Cu) (net 3) (status 30))
(segment (start 40.825 100) (end 45.02 100) (width 0.3) (layer F.Cu) (net 3) (status 10))
(segment (start 45 100.02) (end 45 101.675) (width 0.3) (layer F.Cu) (net 3) (status 20))
(segment (start 45.02 100) (end 45 100.02) (width 0.3) (layer F.Cu) (net 3))
(segment (start 45.02 100) (end 45.02 99.37) (width 0.3) (layer F.Cu) (net 3))
(segment (start 45.02 99.37) (end 46.03 98.36) (width 0.3) (layer F.Cu) (net 3))
(segment (start 45 101.675) (end 45 102.97) (width 0.3) (layer F.Cu) (net 3) (status 10))
(segment (start 45 102.97) (end 44.45 103.52) (width 0.3) (layer F.Cu) (net 3))
(segment (start 42.9425 103.52) (end 41.64 104.8225) (width 0.3) (layer F.Cu) (net 3) (status 20))
(segment (start 44.45 103.52) (end 42.9425 103.52) (width 0.3) (layer F.Cu) (net 3))
(segment (start 23.96 90.34) (end 23.96 90.79) (width 0.3) (layer B.Cu) (net 3) (status 30))
(segment (start 23.96 90.79) (end 24.77 91.6) (width 0.3) (layer B.Cu) (net 3) (status 10))
(segment (start 24.77 91.6) (end 28.2 91.6) (width 0.3) (layer B.Cu) (net 3))
(segment (start 29.2125 92.6125) (end 29.2125 93.5) (width 0.3) (layer B.Cu) (net 3) (status 20))
(segment (start 29.2125 102.5) (end 29.2125 103.6375) (width 0.3) (layer B.Cu) (net 3) (status 10))
(via (at 29.21 103.64) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 3))
(segment (start 29.2125 103.6375) (end 29.21 103.64) (width 0.3) (layer B.Cu) (net 3))
(segment (start 28.2 91.6) (end 29.21 92.46) (width 0.3) (layer B.Cu) (net 3))
(segment (start 29.21 92.46) (end 29.2125 92.6125) (width 0.3) (layer B.Cu) (net 3))
(segment (start 31.2875 72.5) (end 32.7875 71) (width 0.3) (layer F.Cu) (net 3) (status 30))
(segment (start 31.2125 72.5) (end 31.2875 72.5) (width 0.3) (layer F.Cu) (net 3) (status 30))
(segment (start 32.7875 71) (end 32.7875 69.5) (width 0.3) (layer F.Cu) (net 3) (status 30))
(segment (start 32.7875 69.5) (end 32.7875 68) (width 0.3) (layer F.Cu) (net 3) (status 30))
(segment (start 31.2875 72.5) (end 32.7875 74) (width 0.3) (layer F.Cu) (net 3) (status 30))
(segment (start 32.7875 74) (end 32.7875 77) (width 0.3) (layer F.Cu) (net 3) (status 30))
(segment (start 21 73) (end 28 73) (width 0.6) (layer F.Cu) (net 3) (status 20))
(segment (start 38.025 68.425) (end 37.45 67.85) (width 0.3) (layer B.Cu) (net 3) (status 10))
(segment (start 38.5 68.425) (end 38.025 68.425) (width 0.3) (layer B.Cu) (net 3) (status 30))
(via (at 33.81 67.88) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 3))
(segment (start 37.45 67.85) (end 33.84 67.85) (width 0.3) (layer B.Cu) (net 3))
(segment (start 33.84 67.85) (end 33.81 67.88) (width 0.3) (layer B.Cu) (net 3))
(segment (start 32.9075 67.88) (end 32.7875 68) (width 0.3) (layer F.Cu) (net 3) (status 30))
(segment (start 33.81 67.88) (end 32.9075 67.88) (width 0.3) (layer F.Cu) (net 3) (status 20))
(segment (start 33.3775 73.41) (end 32.7875 74) (width 0.3) (layer F.Cu) (net 3) (status 20))
(segment (start 36.628225 73.41) (end 33.3775 73.41) (width 0.3) (layer F.Cu) (net 3))
(segment (start 37.46 73.135) (end 36.903225 73.135) (width 0.3) (layer F.Cu) (net 3) (status 10))
(segment (start 36.903225 73.135) (end 36.628225 73.41) (width 0.3) (layer F.Cu) (net 3))
(segment (start 36.7125 78) (end 36.7125 80) (width 0.3) (layer F.Cu) (net 3) (status 30))
(segment (start 36.7125 81.8125) (end 37 82.1) (width 0.3) (layer F.Cu) (net 3) (status 30))
(segment (start 36.7125 80) (end 36.7125 81.8125) (width 0.3) (layer F.Cu) (net 3) (status 30))
(via (at 46 98) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 3))
(segment (start 46.03 98.36) (end 46.03 98.03) (width 0.3) (layer F.Cu) (net 3))
(segment (start 46.03 98.03) (end 46 98) (width 0.3) (layer F.Cu) (net 3))
(segment (start 46 98) (end 46 96.2125) (width 0.3) (layer B.Cu) (net 3) (status 20))
(segment (start 54.99 99) (end 54.5 98.5) (width 0.3) (layer F.Cu) (net 3))
(segment (start 53.75 98.5) (end 54.5 98.5) (width 0.6) (layer F.Cu) (net 3))
(via (at 50.25 92.34) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 3))
(segment (start 49.613604 92.34) (end 50.25 92.34) (width 0.6) (layer B.Cu) (net 3))
(segment (start 48.48 92.38) (end 48.52 92.34) (width 0.6) (layer B.Cu) (net 3))
(segment (start 48.52 92.34) (end 49.613604 92.34) (width 0.6) (layer B.Cu) (net 3))
(segment (start 50.699999 91.890001) (end 50.25 92.34) (width 0.6) (layer F.Cu) (net 3))
(segment (start 21 73) (end 21 68) (width 1) (layer F.Cu) (net 3))
(segment (start 58.7125 98.525) (end 58.7125 99) (width 0.6) (layer F.Cu) (net 3) (status 30))
(segment (start 59.4375 97.8) (end 58.7125 98.525) (width 0.6) (layer F.Cu) (net 3) (status 20))
(segment (start 51.045 91.545) (end 50.699999 91.890001) (width 0.6) (layer F.Cu) (net 3) (tstamp 5E039F08))
(via (at 51.045 91.545) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 3))
(segment (start 50.25 92.34) (end 51.045 91.545) (width 0.6) (layer B.Cu) (net 3))
(via (at 54 96.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 3))
(segment (start 52.875 97.625) (end 53.75 98.5) (width 0.6) (layer F.Cu) (net 3))
(segment (start 59.5 97.7375) (end 59.4375 97.8) (width 0.4) (layer F.Cu) (net 3))
(segment (start 52.875 97.625) (end 54 96.5) (width 0.6) (layer F.Cu) (net 3))
(segment (start 39.1 82.1) (end 37 82.1) (width 0.6) (layer F.Cu) (net 3) (status 20))
(segment (start 59.5 97.7375) (end 59.78 97.4575) (width 0.6) (layer F.Cu) (net 3))
(segment (start 59.78 96.473553) (end 59.78 96.12) (width 0.6) (layer F.Cu) (net 3))
(via (at 59.78 96.12) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 3))
(segment (start 59.78 97.4575) (end 59.78 96.473553) (width 0.6) (layer F.Cu) (net 3))
(segment (start 59.33 95.67) (end 59.78 96.12) (width 0.6) (layer B.Cu) (net 3))
(segment (start 54 96.5) (end 54.83 95.67) (width 0.6) (layer B.Cu) (net 3))
(segment (start 61.53 97.8) (end 59.4375 97.8) (width 0.6) (layer F.Cu) (net 3))
(segment (start 62.025 103) (end 62.6 103) (width 0.6) (layer F.Cu) (net 3) (status 10))
(segment (start 63.5 99.77) (end 61.53 97.8) (width 0.6) (layer F.Cu) (net 3))
(segment (start 63.5 102.1) (end 63.5 99.77) (width 0.6) (layer F.Cu) (net 3))
(segment (start 62.6 103) (end 63.5 102.1) (width 0.6) (layer F.Cu) (net 3))
(segment (start 49.09 97.9) (end 49.74 98.55) (width 0.3) (layer F.Cu) (net 3))
(segment (start 49.09 98.05) (end 49.09 97.9) (width 0.3) (layer F.Cu) (net 3))
(segment (start 48.6 98.54) (end 49.09 98.05) (width 0.3) (layer F.Cu) (net 3))
(segment (start 47.59 98.54) (end 48.6 98.54) (width 0.3) (layer F.Cu) (net 3))
(segment (start 47.5 101.675) (end 47.5 98.61) (width 0.3) (layer F.Cu) (net 3) (status 10))
(segment (start 54.83 95.67) (end 56.81 95.67) (width 0.6) (layer B.Cu) (net 3))
(segment (start 56.81 95.67) (end 59.33 95.67) (width 0.6) (layer B.Cu) (net 3))
(segment (start 51.52 96.27) (end 52.875 97.625) (width 0.6) (layer F.Cu) (net 3))
(segment (start 48.48 93.76) (end 49.36 94.64) (width 0.6) (layer F.Cu) (net 3))
(segment (start 50.99 96.27) (end 51.52 96.27) (width 0.6) (layer F.Cu) (net 3))
(segment (start 49.09 94.37) (end 49.09 97.9) (width 0.6) (layer F.Cu) (net 3))
(segment (start 48.48 93.76) (end 49.09 94.37) (width 0.6) (layer F.Cu) (net 3))
(segment (start 39.25 82.25) (end 39.1 82.1) (width 0.6) (layer F.Cu) (net 3))
(segment (start 39.25 83.5) (end 39.25 82.25) (width 0.6) (layer F.Cu) (net 3))
(segment (start 39.75 84) (end 40.25 83.5) (width 0.6) (layer F.Cu) (net 3))
(segment (start 40.25 84.5) (end 40.25 83.5) (width 0.6) (layer B.Cu) (net 3))
(segment (start 40.25 83.5) (end 39.25 83.5) (width 0.6) (layer B.Cu) (net 3))
(segment (start 39.25 83.5) (end 39.25 84.5) (width 0.6) (layer B.Cu) (net 3))
(segment (start 39.25 84.5) (end 40.25 84.5) (width 0.6) (layer B.Cu) (net 3))
(segment (start 39.75 84) (end 40.25 84.5) (width 0.6) (layer B.Cu) (net 3))
(segment (start 39.25 83.5) (end 40.25 83.5) (width 0.6) (layer F.Cu) (net 3))
(segment (start 40.25 83.5) (end 40.25 84.5) (width 0.6) (layer F.Cu) (net 3))
(segment (start 40.25 84.5) (end 39.25 84.5) (width 0.6) (layer F.Cu) (net 3))
(segment (start 39.25 84.5) (end 39.25 83.5) (width 0.6) (layer F.Cu) (net 3))
(segment (start 41.5 84.5) (end 40.25 84.5) (width 0.6) (layer F.Cu) (net 3))
(segment (start 42 85) (end 41.5 84.5) (width 0.6) (layer F.Cu) (net 3))
(segment (start 29.23 94.146425) (end 29.23 94.499978) (width 0.3) (layer B.Cu) (net 3))
(segment (start 29.21 92.46) (end 29.23 92.48) (width 0.3) (layer B.Cu) (net 3))
(via (at 29.23 94.499978) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 3))
(segment (start 29.23 92.48) (end 29.23 94.146425) (width 0.3) (layer B.Cu) (net 3))
(segment (start 29.21 103.64) (end 29.21 94.519978) (width 0.3) (layer F.Cu) (net 3))
(segment (start 29.21 94.519978) (end 29.23 94.499978) (width 0.3) (layer F.Cu) (net 3))
(segment (start 49.36 94.64) (end 50.99 96.27) (width 0.6) (layer F.Cu) (net 3) (tstamp 5E054C03))
(via (at 49.36 94.64) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 3))
(segment (start 48.48 93.76) (end 49.36 94.64) (width 0.4) (layer B.Cu) (net 3))
(segment (start 23.96 85.5296) (end 19.985 81.5546) (width 0.6) (layer B.Cu) (net 3))
(via (at 19.8834 76.2714) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 3))
(segment (start 19.985 81.5546) (end 19.985 76.373) (width 0.6) (layer B.Cu) (net 3))
(segment (start 19.985 76.373) (end 19.8834 76.2714) (width 0.6) (layer B.Cu) (net 3))
(segment (start 20.8847 76.2714) (end 19.8834 76.2714) (width 0.6) (layer F.Cu) (net 3))
(segment (start 21 76.3867) (end 20.8847 76.2714) (width 0.6) (layer F.Cu) (net 3))
(segment (start 21 76.3867) (end 21 73) (width 1) (layer F.Cu) (net 3))
(segment (start 24 88) (end 24.925 88) (width 0.3) (layer B.Cu) (net 3) (status 20))
(segment (start 23.96 87.96) (end 24 88) (width 0.3) (layer B.Cu) (net 3))
(segment (start 23.96 90.34) (end 23.96 87.96) (width 0.6) (layer B.Cu) (net 3) (status 10))
(segment (start 23.96 87.96) (end 23.96 85.5296) (width 0.6) (layer B.Cu) (net 3))
(segment (start 40.25 85.150002) (end 47.479998 92.38) (width 0.6) (layer B.Cu) (net 3))
(segment (start 40.25 84.5) (end 40.25 85.150002) (width 0.6) (layer B.Cu) (net 3))
(segment (start 47.479998 92.38) (end 48.48 92.38) (width 0.6) (layer B.Cu) (net 3))
(segment (start 33.4025 68.2875) (end 33.81 67.88) (width 0.3) (layer B.Cu) (net 3))
(segment (start 32 68.2875) (end 33.4025 68.2875) (width 0.3) (layer B.Cu) (net 3))
(segment (start 46.03 98.36) (end 46.21 98.54) (width 0.3) (layer F.Cu) (net 3))
(segment (start 46.21 98.54) (end 47.57 98.54) (width 0.3) (layer F.Cu) (net 3))
(via (at 33.75 107.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 3))
(via (at 37.5 107.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 3))
(segment (start 33.75 107.25) (end 37.5 107.25) (width 0.3) (layer B.Cu) (net 3))
(segment (start 37.5 107.25) (end 37.5 105.85) (width 0.3) (layer F.Cu) (net 3))
(segment (start 33 107.25) (end 33.75 107.25) (width 0.3) (layer B.Cu) (net 3))
(segment (start 29.21 103.64) (end 32.82 107.25) (width 0.3) (layer B.Cu) (net 3))
(segment (start 32.82 107.25) (end 33 107.25) (width 0.3) (layer B.Cu) (net 3))
(segment (start 33.75 107.25) (end 33.75 105.85) (width 0.3) (layer F.Cu) (net 3))
(segment (start 31.2125 72.5) (end 30.81 72.5) (width 0.3) (layer F.Cu) (net 3))
(segment (start 30.31 73) (end 28 73) (width 0.3) (layer F.Cu) (net 3))
(segment (start 30.81 72.5) (end 30.31 73) (width 0.3) (layer F.Cu) (net 3))
(segment (start 31.85 82.1) (end 37 82.1) (width 1) (layer F.Cu) (net 3))
(segment (start 31.4 82.1) (end 31.85 82.1) (width 1) (layer F.Cu) (net 3))
(segment (start 29.9 83.6) (end 31.4 82.1) (width 1) (layer F.Cu) (net 3))
(segment (start 27.13 83.6) (end 29.9 83.6) (width 1) (layer F.Cu) (net 3))
(segment (start 24.92 78.25) (end 26.26 79.59) (width 1) (layer F.Cu) (net 3))
(segment (start 26.26 82.73) (end 27.13 83.6) (width 1) (layer F.Cu) (net 3))
(segment (start 21 77.3118) (end 21.9382 78.25) (width 1) (layer F.Cu) (net 3))
(segment (start 26.26 79.59) (end 26.26 82.73) (width 1) (layer F.Cu) (net 3))
(segment (start 21 76.3867) (end 21 77.3118) (width 1) (layer F.Cu) (net 3))
(segment (start 21.9382 78.25) (end 24.92 78.25) (width 1) (layer F.Cu) (net 3))
(segment (start 48.465 82.12) (end 48.465 77.795) (width 0.3) (layer B.Cu) (net 3))
(segment (start 49.735 76.525) (end 49.735 74.72) (width 0.3) (layer B.Cu) (net 3))
(segment (start 48.465 77.795) (end 49.735 76.525) (width 0.3) (layer B.Cu) (net 3))
(segment (start 49.735 74.72) (end 51.005 74.72) (width 0.3) (layer B.Cu) (net 3))
(segment (start 52.805 72.92) (end 51.005 74.72) (width 0.3) (layer B.Cu) (net 3))
(segment (start 52.805 72.81) (end 52.805 72.92) (width 0.3) (layer B.Cu) (net 3))
(segment (start 48.465 82.625) (end 48.465 82.12) (width 0.3) (layer B.Cu) (net 3))
(segment (start 48.43 82.66) (end 48.465 82.625) (width 0.3) (layer B.Cu) (net 3))
(segment (start 48.43 82.7) (end 48.43 82.66) (width 0.3) (layer B.Cu) (net 3))
(segment (start 48.82 84.132) (end 48.47 83.782) (width 0.3) (layer B.Cu) (net 3))
(segment (start 48.48 91.69) (end 49.06 91.11) (width 0.3) (layer B.Cu) (net 3))
(segment (start 48.47 82.74) (end 48.43 82.7) (width 0.3) (layer B.Cu) (net 3))
(segment (start 49.06 91.11) (end 49.06 84.948002) (width 0.3) (layer B.Cu) (net 3))
(segment (start 49.06 84.948002) (end 48.82 84.708002) (width 0.3) (layer B.Cu) (net 3))
(segment (start 48.47 83.782) (end 48.47 82.74) (width 0.3) (layer B.Cu) (net 3))
(segment (start 48.48 92.38) (end 48.48 91.69) (width 0.3) (layer B.Cu) (net 3))
(segment (start 48.82 84.708002) (end 48.82 84.132) (width 0.3) (layer B.Cu) (net 3))
(segment (start 52.21 90.38) (end 51.045 91.545) (width 0.6) (layer F.Cu) (net 3))
(segment (start 55.2 88) (end 56.175 88) (width 0.3) (layer F.Cu) (net 3))
(segment (start 52.21 90.38) (end 53.31 90.38) (width 0.3) (layer F.Cu) (net 3))
(segment (start 54.87 88.33) (end 55.2 88) (width 0.3) (layer F.Cu) (net 3))
(segment (start 54.87 88.82) (end 54.87 88.33) (width 0.3) (layer F.Cu) (net 3))
(segment (start 53.31 90.38) (end 54.87 88.82) (width 0.3) (layer F.Cu) (net 3))
(segment (start 31.5 58) (end 31.25 57.75) (width 1) (layer F.Cu) (net 3))
(segment (start 37.4375 58) (end 31.5 58) (width 1) (layer F.Cu) (net 3))
(segment (start 31.25 57.75) (end 35 54) (width 1) (layer F.Cu) (net 3))
(segment (start 21 68) (end 31.25 57.75) (width 1) (layer F.Cu) (net 3))
(segment (start 58.7125 99) (end 56.175 99) (width 0.3) (layer F.Cu) (net 3))
(segment (start 35 51.1) (end 34.65 50.75) (width 1) (layer F.Cu) (net 3))
(segment (start 35 54) (end 35 51.1) (width 1) (layer F.Cu) (net 3))
(segment (start 33.15 49.25) (end 34.65 50.75) (width 0.4) (layer F.Cu) (net 3))
(segment (start 30.2875 49.25) (end 33.15 49.25) (width 0.4) (layer F.Cu) (net 3))
(segment (start 70.5 69.5) (end 70.45 69.55) (width 0.6) (layer F.Cu) (net 4))
(segment (start 71.6 69.5) (end 70.5 69.5) (width 0.6) (layer F.Cu) (net 4))
(segment (start 70.45 73.1) (end 70.45 69.55) (width 0.6) (layer F.Cu) (net 4))
(segment (start 71.6 67.7) (end 71.6 69.5) (width 0.6) (layer F.Cu) (net 4))
(segment (start 73 66.3) (end 71.6 67.7) (width 0.6) (layer F.Cu) (net 4))
(segment (start 73 64.875) (end 73 66.3) (width 0.6) (layer F.Cu) (net 4))
(segment (start 30.7875 93.5) (end 30.7875 95.5) (width 0.3) (layer B.Cu) (net 5) (status 30))
(segment (start 32.42 95.5) (end 32.5 95.42) (width 0.3) (layer B.Cu) (net 5) (status 30))
(segment (start 30.7875 95.5) (end 32.42 95.5) (width 0.3) (layer B.Cu) (net 5) (status 30))
(via (at 55.25 104) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 5))
(segment (start 53.5 101.675) (end 53.5 102.98) (width 0.3) (layer F.Cu) (net 5))
(segment (start 53.5 102.98) (end 54.52 104) (width 0.3) (layer F.Cu) (net 5))
(segment (start 54.52 104) (end 55.25 104) (width 0.3) (layer F.Cu) (net 5))
(segment (start 54.25 105) (end 55.25 104) (width 0.3) (layer B.Cu) (net 5))
(segment (start 52 105) (end 54.25 105) (width 0.3) (layer B.Cu) (net 5))
(segment (start 48.77 101.77) (end 52 105) (width 0.3) (layer B.Cu) (net 5))
(segment (start 38.85 101.77) (end 48.77 101.77) (width 0.3) (layer B.Cu) (net 5))
(segment (start 32.5 95.42) (end 38.85 101.77) (width 0.3) (layer B.Cu) (net 5))
(segment (start 30.7875 100.5) (end 32.5 100.5) (width 0.3) (layer B.Cu) (net 6) (status 30))
(segment (start 30.7875 102.5) (end 30.7875 100.5) (width 0.3) (layer B.Cu) (net 6) (status 30))
(via (at 56.75 105) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 6))
(segment (start 56.75 104.448224) (end 56.75 105) (width 0.3) (layer F.Cu) (net 6))
(segment (start 55.301776 103) (end 56.75 104.448224) (width 0.3) (layer F.Cu) (net 6))
(segment (start 54.27 103) (end 55.301776 103) (width 0.3) (layer F.Cu) (net 6))
(segment (start 54 102.73) (end 54.27 103) (width 0.3) (layer F.Cu) (net 6))
(segment (start 54 101.675) (end 54 102.73) (width 0.3) (layer F.Cu) (net 6))
(segment (start 51.75 105.75) (end 56 105.75) (width 0.3) (layer B.Cu) (net 6))
(segment (start 48.54 102.54) (end 51.75 105.75) (width 0.3) (layer B.Cu) (net 6))
(segment (start 56 105.75) (end 56.75 105) (width 0.3) (layer B.Cu) (net 6))
(segment (start 34.54 102.54) (end 48.54 102.54) (width 0.3) (layer B.Cu) (net 6))
(segment (start 32.5 100.5) (end 34.54 102.54) (width 0.3) (layer B.Cu) (net 6))
(segment (start 53 99.2875) (end 54.5 99.2875) (width 0.3) (layer B.Cu) (net 7) (status 30))
(via (at 53 100.000056) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 7))
(segment (start 52.5 100.500056) (end 53 100.000056) (width 0.3) (layer F.Cu) (net 7))
(segment (start 53 99.2875) (end 53 100.000056) (width 0.3) (layer B.Cu) (net 7) (status 10))
(segment (start 52.5 101.675) (end 52.5 100.500056) (width 0.3) (layer F.Cu) (net 7) (status 10))
(segment (start 52.7125 100.287556) (end 53 100.000056) (width 0.25) (layer B.Cu) (net 7))
(segment (start 52.7125 101.5) (end 52.7125 100.287556) (width 0.25) (layer B.Cu) (net 7))
(segment (start 32.88 92.5) (end 32.5 92.88) (width 0.3) (layer F.Cu) (net 8) (status 30))
(segment (start 40.825 92.5) (end 32.88 92.5) (width 0.3) (layer F.Cu) (net 8) (status 30))
(segment (start 32.62 93) (end 32.5 92.88) (width 0.3) (layer B.Cu) (net 8) (status 30))
(segment (start 34.7125 93) (end 32.62 93) (width 0.3) (layer B.Cu) (net 8) (status 30))
(segment (start 74.450001 87.700001) (end 73.25 86.5) (width 0.3) (layer F.Cu) (net 9))
(segment (start 74.450001 93.124999) (end 74.450001 87.700001) (width 0.3) (layer F.Cu) (net 9))
(segment (start 73.8 94.3) (end 73.8 93.775) (width 0.3) (layer F.Cu) (net 9))
(segment (start 73.8 93.775) (end 74.450001 93.124999) (width 0.3) (layer F.Cu) (net 9))
(segment (start 72.7875 86.9625) (end 73.25 86.5) (width 0.3) (layer B.Cu) (net 9))
(segment (start 70.5 86.9625) (end 72.7875 86.9625) (width 0.3) (layer B.Cu) (net 9))
(segment (start 75.83 89) (end 75.79 89.04) (width 0.3) (layer F.Cu) (net 10))
(segment (start 79.4625 89) (end 75.83 89) (width 0.3) (layer F.Cu) (net 10))
(segment (start 75.5 94.275) (end 74.825 94.95) (width 0.3) (layer F.Cu) (net 10))
(segment (start 74.825 94.95) (end 73.8 94.95) (width 0.3) (layer F.Cu) (net 10))
(segment (start 75.79 89.04) (end 75.5 89.33) (width 0.3) (layer F.Cu) (net 10))
(segment (start 75.5 89.33) (end 75.5 94.275) (width 0.3) (layer F.Cu) (net 10))
(segment (start 74.940001 88.190001) (end 75.79 89.04) (width 0.3) (layer B.Cu) (net 10))
(segment (start 71.672501 87.839999) (end 74.589999 87.839999) (width 0.3) (layer B.Cu) (net 10))
(segment (start 70.975 88.5375) (end 71.672501 87.839999) (width 0.3) (layer B.Cu) (net 10))
(segment (start 74.589999 87.839999) (end 74.940001 88.190001) (width 0.3) (layer B.Cu) (net 10))
(segment (start 70.5 88.5375) (end 70.975 88.5375) (width 0.3) (layer B.Cu) (net 10))
(via (at 77.25 84.99998) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 10))
(segment (start 76 83.5) (end 77.25 84.75) (width 0.25) (layer F.Cu) (net 10))
(segment (start 77.25 84.75) (end 77.25 84.99998) (width 0.25) (layer F.Cu) (net 10))
(segment (start 77.25 87.58) (end 77.25 84.99998) (width 0.25) (layer B.Cu) (net 10))
(segment (start 75.79 89.04) (end 77.25 87.58) (width 0.25) (layer B.Cu) (net 10))
(segment (start 69 86.9625) (end 70.5 86.9625) (width 0.3) (layer F.Cu) (net 11))
(segment (start 70.5 86.525) (end 72.025 85) (width 0.3) (layer F.Cu) (net 11))
(segment (start 70.5 86.9625) (end 70.5 86.525) (width 0.3) (layer F.Cu) (net 11))
(segment (start 74.29 85) (end 75.79 86.5) (width 0.3) (layer F.Cu) (net 11))
(segment (start 72.025 85) (end 74.29 85) (width 0.3) (layer F.Cu) (net 11))
(segment (start 76.992081 86.5) (end 75.79 86.5) (width 0.3) (layer F.Cu) (net 11))
(segment (start 81.65 95.6) (end 83.75 93.5) (width 0.3) (layer F.Cu) (net 11))
(segment (start 79.7 95.6) (end 81.65 95.6) (width 0.3) (layer F.Cu) (net 11))
(segment (start 83.75 89.25) (end 81 86.5) (width 0.3) (layer F.Cu) (net 11))
(segment (start 83.75 93.5) (end 83.75 89.25) (width 0.3) (layer F.Cu) (net 11))
(segment (start 81 86.5) (end 76.992081 86.5) (width 0.3) (layer F.Cu) (net 11))
(segment (start 72.7475 88.5375) (end 73.25 89.04) (width 0.3) (layer F.Cu) (net 12))
(segment (start 70.5 88.5375) (end 72.7475 88.5375) (width 0.3) (layer F.Cu) (net 12))
(segment (start 69 88.5375) (end 70.5 88.5375) (width 0.3) (layer F.Cu) (net 12))
(via (at 76.75 91.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 12))
(segment (start 75.46 91.25) (end 73.25 89.04) (width 0.3) (layer B.Cu) (net 12))
(segment (start 76.75 91.25) (end 75.46 91.25) (width 0.3) (layer B.Cu) (net 12))
(segment (start 76.25 95.75) (end 76.25 91.75) (width 0.3) (layer F.Cu) (net 12))
(segment (start 79.7 96.9) (end 77.4 96.9) (width 0.3) (layer F.Cu) (net 12))
(segment (start 76.25 91.75) (end 76.75 91.25) (width 0.3) (layer F.Cu) (net 12))
(segment (start 77.4 96.9) (end 76.25 95.75) (width 0.3) (layer F.Cu) (net 12))
(segment (start 30.6125 68.6) (end 31.2125 68) (width 0.3) (layer F.Cu) (net 13))
(segment (start 29 68.6) (end 30.6125 68.6) (width 0.3) (layer F.Cu) (net 13))
(segment (start 47 75.55) (end 47 86.325) (width 0.3) (layer F.Cu) (net 13))
(segment (start 47.21 75.34) (end 47 75.55) (width 0.3) (layer F.Cu) (net 13))
(segment (start 47.21 66.18) (end 47.21 75.34) (width 0.3) (layer F.Cu) (net 13))
(segment (start 44.39 63.36) (end 47.21 66.18) (width 0.3) (layer F.Cu) (net 13))
(segment (start 38.590165 64.168973) (end 38.647046 64.133232) (width 0.3) (layer F.Cu) (net 13))
(segment (start 38.22545 64.085729) (end 38.272953 64.133232) (width 0.3) (layer F.Cu) (net 13))
(segment (start 38.46 64.198683) (end 38.526756 64.191161) (width 0.3) (layer F.Cu) (net 13))
(segment (start 38.647046 64.133232) (end 38.694549 64.085729) (width 0.3) (layer F.Cu) (net 13))
(segment (start 39.389709 63.190166) (end 39.42545 63.247047) (width 0.3) (layer F.Cu) (net 13))
(segment (start 38.393243 64.191161) (end 38.46 64.198683) (width 0.3) (layer F.Cu) (net 13))
(segment (start 39.529834 63.330291) (end 39.593243 63.352479) (width 0.3) (layer F.Cu) (net 13))
(segment (start 38.167521 63.965439) (end 38.189709 64.028848) (width 0.3) (layer F.Cu) (net 13))
(segment (start 38.16 63.898683) (end 38.167521 63.965439) (width 0.3) (layer F.Cu) (net 13))
(segment (start 38.272953 64.133232) (end 38.329834 64.168973) (width 0.3) (layer F.Cu) (net 13))
(segment (start 38.152478 63.593243) (end 38.16 63.66) (width 0.3) (layer F.Cu) (net 13))
(segment (start 38.189709 64.028848) (end 38.22545 64.085729) (width 0.3) (layer F.Cu) (net 13))
(segment (start 38.526756 64.191161) (end 38.590165 64.168973) (width 0.3) (layer F.Cu) (net 13))
(segment (start 38.16 63.66) (end 38.16 63.898683) (width 0.3) (layer F.Cu) (net 13))
(segment (start 39.66 63.36) (end 44.39 63.36) (width 0.3) (layer F.Cu) (net 13))
(segment (start 37.926756 63.367521) (end 37.990165 63.389709) (width 0.3) (layer F.Cu) (net 13))
(segment (start 39.36 62.821317) (end 39.36 63.06) (width 0.3) (layer F.Cu) (net 13))
(segment (start 38.329834 64.168973) (end 38.393243 64.191161) (width 0.3) (layer F.Cu) (net 13))
(segment (start 38.76 63.898683) (end 38.76 62.821317) (width 0.3) (layer F.Cu) (net 13))
(segment (start 38.694549 64.085729) (end 38.73029 64.028848) (width 0.3) (layer F.Cu) (net 13))
(segment (start 39.126756 62.528839) (end 39.190165 62.551027) (width 0.3) (layer F.Cu) (net 13))
(segment (start 38.047046 63.42545) (end 38.094549 63.472953) (width 0.3) (layer F.Cu) (net 13))
(segment (start 38.73029 64.028848) (end 38.752478 63.965439) (width 0.3) (layer F.Cu) (net 13))
(segment (start 39.367521 63.126757) (end 39.389709 63.190166) (width 0.3) (layer F.Cu) (net 13))
(segment (start 31.2125 68) (end 31.2125 67.525) (width 0.3) (layer F.Cu) (net 13))
(segment (start 37.990165 63.389709) (end 38.047046 63.42545) (width 0.3) (layer F.Cu) (net 13))
(segment (start 35.3775 63.36) (end 37.86 63.36) (width 0.3) (layer F.Cu) (net 13))
(segment (start 38.752478 63.965439) (end 38.76 63.898683) (width 0.3) (layer F.Cu) (net 13))
(segment (start 38.76 62.821317) (end 38.767521 62.754561) (width 0.3) (layer F.Cu) (net 13))
(segment (start 38.767521 62.754561) (end 38.789709 62.691152) (width 0.3) (layer F.Cu) (net 13))
(segment (start 38.993243 62.528839) (end 39.06 62.521317) (width 0.3) (layer F.Cu) (net 13))
(segment (start 38.82545 62.634271) (end 38.872953 62.586768) (width 0.3) (layer F.Cu) (net 13))
(segment (start 38.789709 62.691152) (end 38.82545 62.634271) (width 0.3) (layer F.Cu) (net 13))
(segment (start 38.929834 62.551027) (end 38.993243 62.528839) (width 0.3) (layer F.Cu) (net 13))
(segment (start 39.593243 63.352479) (end 39.66 63.36) (width 0.3) (layer F.Cu) (net 13))
(segment (start 37.86 63.36) (end 37.926756 63.367521) (width 0.3) (layer F.Cu) (net 13))
(segment (start 39.352478 62.754561) (end 39.36 62.821317) (width 0.3) (layer F.Cu) (net 13))
(segment (start 38.872953 62.586768) (end 38.929834 62.551027) (width 0.3) (layer F.Cu) (net 13))
(segment (start 39.06 62.521317) (end 39.126756 62.528839) (width 0.3) (layer F.Cu) (net 13))
(segment (start 39.36 63.06) (end 39.367521 63.126757) (width 0.3) (layer F.Cu) (net 13))
(segment (start 31.2125 67.525) (end 35.3775 63.36) (width 0.3) (layer F.Cu) (net 13))
(segment (start 38.094549 63.472953) (end 38.13029 63.529834) (width 0.3) (layer F.Cu) (net 13))
(segment (start 39.190165 62.551027) (end 39.247046 62.586768) (width 0.3) (layer F.Cu) (net 13))
(segment (start 38.13029 63.529834) (end 38.152478 63.593243) (width 0.3) (layer F.Cu) (net 13))
(segment (start 39.247046 62.586768) (end 39.294549 62.634271) (width 0.3) (layer F.Cu) (net 13))
(segment (start 39.294549 62.634271) (end 39.33029 62.691152) (width 0.3) (layer F.Cu) (net 13))
(segment (start 39.33029 62.691152) (end 39.352478 62.754561) (width 0.3) (layer F.Cu) (net 13))
(segment (start 39.42545 63.247047) (end 39.472953 63.29455) (width 0.3) (layer F.Cu) (net 13))
(segment (start 39.472953 63.29455) (end 39.529834 63.330291) (width 0.3) (layer F.Cu) (net 13))
(segment (start 31.0125 69.7) (end 31.2125 69.5) (width 0.3) (layer F.Cu) (net 14) (status 30))
(segment (start 28 69.7) (end 31.0125 69.7) (width 0.3) (layer F.Cu) (net 14) (status 30))
(via (at 25.88 69.47) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 14))
(segment (start 28 69.7) (end 26.11 69.7) (width 0.3) (layer F.Cu) (net 14) (status 10))
(segment (start 26.11 69.7) (end 25.88 69.47) (width 0.3) (layer F.Cu) (net 14))
(via (at 42.86 92.26) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 14))
(segment (start 47.5 86.325) (end 47.5 87.62) (width 0.3) (layer F.Cu) (net 14) (status 10))
(segment (start 47.5 87.62) (end 43.109999 92.010001) (width 0.3) (layer F.Cu) (net 14))
(segment (start 43.109999 92.010001) (end 42.86 92.26) (width 0.3) (layer F.Cu) (net 14))
(segment (start 28.658992 72.238355) (end 28.606471 72.196471) (width 0.3) (layer B.Cu) (net 14))
(segment (start 28.785013 72.282452) (end 28.719518 72.267503) (width 0.3) (layer B.Cu) (net 14))
(segment (start 28.852191 72.282452) (end 28.785013 72.282452) (width 0.3) (layer B.Cu) (net 14))
(segment (start 28.917686 72.267503) (end 28.852191 72.282452) (width 0.3) (layer B.Cu) (net 14))
(segment (start 28.978212 72.238355) (end 28.917686 72.267503) (width 0.3) (layer B.Cu) (net 14))
(segment (start 29.030734 72.19647) (end 28.978212 72.238355) (width 0.3) (layer B.Cu) (net 14))
(segment (start 29.102699 72.124506) (end 29.030734 72.19647) (width 0.3) (layer B.Cu) (net 14))
(segment (start 29.155222 72.08262) (end 29.102699 72.124506) (width 0.3) (layer B.Cu) (net 14))
(segment (start 29.215748 72.053473) (end 29.155222 72.08262) (width 0.3) (layer B.Cu) (net 14))
(segment (start 29.281242 72.038524) (end 29.215748 72.053473) (width 0.3) (layer B.Cu) (net 14))
(segment (start 28.606471 72.196471) (end 27.752909 71.342909) (width 0.3) (layer B.Cu) (net 14))
(segment (start 29.413114 72.673258) (end 29.455 72.620735) (width 0.3) (layer B.Cu) (net 14))
(segment (start 27.752909 71.342909) (end 25.88 69.47) (width 0.3) (layer B.Cu) (net 14))
(segment (start 32.5 83.9825) (end 32.5 76.09) (width 0.3) (layer B.Cu) (net 14))
(segment (start 29.348421 72.038524) (end 29.281242 72.038524) (width 0.3) (layer B.Cu) (net 14))
(segment (start 40.7775 92.26) (end 32.5 83.9825) (width 0.3) (layer B.Cu) (net 14))
(segment (start 29.383967 72.931951) (end 29.369018 72.866457) (width 0.3) (layer B.Cu) (net 14))
(segment (start 29.597997 72.435722) (end 29.612946 72.370227) (width 0.3) (layer B.Cu) (net 14))
(segment (start 42.86 92.26) (end 40.7775 92.26) (width 0.3) (layer B.Cu) (net 14))
(segment (start 29.383967 72.733784) (end 29.413114 72.673258) (width 0.3) (layer B.Cu) (net 14))
(segment (start 29.526964 72.124506) (end 29.474441 72.08262) (width 0.3) (layer B.Cu) (net 14))
(segment (start 29.597997 72.237554) (end 29.568849 72.177028) (width 0.3) (layer B.Cu) (net 14))
(segment (start 29.369018 72.799278) (end 29.383967 72.733784) (width 0.3) (layer B.Cu) (net 14))
(segment (start 29.369018 72.866457) (end 29.369018 72.799278) (width 0.3) (layer B.Cu) (net 14))
(segment (start 29.612946 72.370227) (end 29.612946 72.303049) (width 0.3) (layer B.Cu) (net 14))
(segment (start 29.413114 72.992477) (end 29.383967 72.931951) (width 0.3) (layer B.Cu) (net 14))
(segment (start 29.568849 72.496248) (end 29.597997 72.435722) (width 0.3) (layer B.Cu) (net 14))
(segment (start 28.719518 72.267503) (end 28.658992 72.238355) (width 0.3) (layer B.Cu) (net 14))
(segment (start 29.455 73.045) (end 29.413114 72.992477) (width 0.3) (layer B.Cu) (net 14))
(segment (start 29.526964 72.54877) (end 29.568849 72.496248) (width 0.3) (layer B.Cu) (net 14))
(segment (start 32.5 76.09) (end 29.455 73.045) (width 0.3) (layer B.Cu) (net 14))
(segment (start 29.455 72.620735) (end 29.526964 72.54877) (width 0.3) (layer B.Cu) (net 14))
(segment (start 29.612946 72.303049) (end 29.597997 72.237554) (width 0.3) (layer B.Cu) (net 14))
(segment (start 29.568849 72.177028) (end 29.526964 72.124506) (width 0.3) (layer B.Cu) (net 14))
(segment (start 29.474441 72.08262) (end 29.413915 72.053473) (width 0.3) (layer B.Cu) (net 14))
(segment (start 29.413915 72.053473) (end 29.348421 72.038524) (width 0.3) (layer B.Cu) (net 14))
(via (at 30.83 85.24) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 15))
(via (at 26 71.92) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 15))
(segment (start 30.83 85.42) (end 30.83 85.24) (width 0.3) (layer F.Cu) (net 15))
(segment (start 40.825 90) (end 35.41 90) (width 0.3) (layer F.Cu) (net 15) (status 10))
(segment (start 35.41 90) (end 30.83 85.42) (width 0.3) (layer F.Cu) (net 15))
(segment (start 26.17 71.92) (end 26 71.92) (width 0.3) (layer B.Cu) (net 15))
(segment (start 30.5 76.25) (end 26.17 71.92) (width 0.3) (layer B.Cu) (net 15))
(segment (start 30.43455 77.787046) (end 30.470291 77.730165) (width 0.3) (layer B.Cu) (net 15))
(segment (start 30.387047 77.834549) (end 30.43455 77.787046) (width 0.3) (layer B.Cu) (net 15))
(segment (start 30.330166 77.87029) (end 30.387047 77.834549) (width 0.3) (layer B.Cu) (net 15))
(segment (start 30.266757 77.892478) (end 30.330166 77.87029) (width 0.3) (layer B.Cu) (net 15))
(segment (start 30.2 77.9) (end 30.266757 77.892478) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.84159 77.9) (end 30.2 77.9) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.774834 77.907521) (end 29.84159 77.9) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.711425 77.929709) (end 29.774834 77.907521) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.774834 78.492478) (end 29.711425 78.47029) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.84159 78.5) (end 29.774834 78.492478) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.10841 78.5) (end 29.84159 78.5) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.295456 78.56545) (end 31.238575 78.529709) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.342959 78.612953) (end 31.295456 78.56545) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.3787 78.669834) (end 31.342959 78.612953) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.400888 78.866756) (end 31.40841 78.8) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.342959 78.987046) (end 31.3787 78.930165) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.295456 79.034549) (end 31.342959 78.987046) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.238575 79.07029) (end 31.295456 79.034549) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.54159 78.2) (end 29.549112 78.133243) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.175166 79.092478) (end 31.238575 79.07029) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.3787 81.330165) (end 31.400888 81.266756) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.238575 79.729709) (end 31.175166 79.707521) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.5713 78.330165) (end 29.549112 78.266756) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.84159 79.1) (end 31.10841 79.1) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.238575 81.47029) (end 31.295456 81.434549) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.295456 82.16545) (end 31.238575 82.129709) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.607041 78.387046) (end 29.5713 78.330165) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.774834 79.107521) (end 29.84159 79.1) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.175166 81.492478) (end 31.238575 81.47029) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.711425 79.129709) (end 29.774834 79.107521) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.10841 81.5) (end 31.175166 81.492478) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.10841 80.3) (end 31.175166 80.292478) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.5713 81.669834) (end 29.607041 81.612953) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.549112 81.866756) (end 29.54159 81.8) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.400888 81.266756) (end 31.40841 81.2) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.654544 81.56545) (end 29.711425 81.529709) (width 0.3) (layer B.Cu) (net 15))
(segment (start 30.470291 77.730165) (end 30.492479 77.666756) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.238575 80.929709) (end 31.175166 80.907521) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.607041 81.987046) (end 29.5713 81.930165) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.175166 78.507521) (end 31.10841 78.5) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.295456 80.96545) (end 31.238575 80.929709) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.654544 82.034549) (end 29.607041 81.987046) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.711425 78.47029) (end 29.654544 78.434549) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.654544 79.634549) (end 29.607041 79.587046) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.40841 82.4) (end 31.400888 82.333243) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.774834 82.092478) (end 29.711425 82.07029) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.549112 80.533243) (end 29.5713 80.469834) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.84159 82.1) (end 29.774834 82.092478) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.175166 82.107521) (end 31.10841 82.1) (width 0.3) (layer B.Cu) (net 15))
(segment (start 30.5 83) (end 30.507521 82.933243) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.654544 78.434549) (end 29.607041 78.387046) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.400888 82.333243) (end 31.3787 82.269834) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.711425 81.529709) (end 29.774834 81.507521) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.400888 79.933243) (end 31.3787 79.869834) (width 0.3) (layer B.Cu) (net 15))
(segment (start 30.5 84.91) (end 30.5 83) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.342959 81.387046) (end 31.3787 81.330165) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.84159 80.9) (end 29.774834 80.892478) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.549112 78.266756) (end 29.54159 78.2) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.10841 79.1) (end 31.175166 79.092478) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.295456 81.434549) (end 31.342959 81.387046) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.5713 80.469834) (end 29.607041 80.412953) (width 0.3) (layer B.Cu) (net 15))
(segment (start 30.612953 82.76545) (end 30.669834 82.729709) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.238575 82.67029) (end 31.295456 82.634549) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.549112 81.733243) (end 29.5713 81.669834) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.238575 78.529709) (end 31.175166 78.507521) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.711425 82.07029) (end 29.654544 82.034549) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.342959 81.012953) (end 31.295456 80.96545) (width 0.3) (layer B.Cu) (net 15))
(segment (start 30.733243 82.707521) (end 30.8 82.7) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.549112 78.133243) (end 29.5713 78.069834) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.295456 82.634549) (end 31.342959 82.587046) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.10841 82.1) (end 29.84159 82.1) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.54159 81.8) (end 29.549112 81.733243) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.5713 78.069834) (end 29.607041 78.012953) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.342959 82.587046) (end 31.3787 82.530165) (width 0.3) (layer B.Cu) (net 15))
(segment (start 30.83 85.24) (end 30.5 84.91) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.607041 78.012953) (end 29.654544 77.96545) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.3787 82.530165) (end 31.400888 82.466756) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.10841 82.7) (end 31.175166 82.692478) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.607041 81.612953) (end 29.654544 81.56545) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.774834 79.692478) (end 29.711425 79.67029) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.175166 82.692478) (end 31.238575 82.67029) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.84159 80.3) (end 31.10841 80.3) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.40841 80) (end 31.400888 79.933243) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.711425 79.67029) (end 29.654544 79.634549) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.40841 78.8) (end 31.400888 78.733243) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.10841 79.7) (end 29.84159 79.7) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.607041 79.587046) (end 29.5713 79.530165) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.654544 77.96545) (end 29.711425 77.929709) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.400888 82.466756) (end 31.40841 82.4) (width 0.3) (layer B.Cu) (net 15))
(segment (start 30.56545 82.812953) (end 30.612953 82.76545) (width 0.3) (layer B.Cu) (net 15))
(segment (start 30.529709 82.869834) (end 30.56545 82.812953) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.3787 78.930165) (end 31.400888 78.866756) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.238575 82.129709) (end 31.175166 82.107521) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.711425 80.329709) (end 29.774834 80.307521) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.40841 81.2) (end 31.400888 81.133243) (width 0.3) (layer B.Cu) (net 15))
(segment (start 30.5 77.6) (end 30.5 76.25) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.3787 81.069834) (end 31.342959 81.012953) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.5713 81.930165) (end 29.549112 81.866756) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.175166 80.907521) (end 31.10841 80.9) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.175166 80.292478) (end 31.238575 80.27029) (width 0.3) (layer B.Cu) (net 15))
(segment (start 30.507521 82.933243) (end 30.529709 82.869834) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.10841 80.9) (end 29.84159 80.9) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.774834 80.892478) (end 29.711425 80.87029) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.711425 80.87029) (end 29.654544 80.834549) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.342959 80.187046) (end 31.3787 80.130165) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.654544 80.834549) (end 29.607041 80.787046) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.3787 80.130165) (end 31.400888 80.066756) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.607041 80.787046) (end 29.5713 80.730165) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.400888 80.066756) (end 31.40841 80) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.5713 80.730165) (end 29.549112 80.666756) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.549112 80.666756) (end 29.54159 80.6) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.238575 80.27029) (end 31.295456 80.234549) (width 0.3) (layer B.Cu) (net 15))
(segment (start 30.8 82.7) (end 31.10841 82.7) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.54159 80.6) (end 29.549112 80.533243) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.3787 82.269834) (end 31.342959 82.212953) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.774834 81.507521) (end 29.84159 81.5) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.607041 80.412953) (end 29.654544 80.36545) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.342959 82.212953) (end 31.295456 82.16545) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.84159 81.5) (end 31.10841 81.5) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.654544 80.36545) (end 29.711425 80.329709) (width 0.3) (layer B.Cu) (net 15))
(segment (start 30.492479 77.666756) (end 30.5 77.6) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.400888 81.133243) (end 31.3787 81.069834) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.774834 80.307521) (end 29.84159 80.3) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.295456 80.234549) (end 31.342959 80.187046) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.549112 79.333243) (end 29.5713 79.269834) (width 0.3) (layer B.Cu) (net 15))
(segment (start 30.669834 82.729709) (end 30.733243 82.707521) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.342959 79.812953) (end 31.295456 79.76545) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.5713 79.269834) (end 29.607041 79.212953) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.295456 79.76545) (end 31.238575 79.729709) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.607041 79.212953) (end 29.654544 79.16545) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.175166 79.707521) (end 31.10841 79.7) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.400888 78.733243) (end 31.3787 78.669834) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.84159 79.7) (end 29.774834 79.692478) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.5713 79.530165) (end 29.549112 79.466756) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.549112 79.466756) (end 29.54159 79.4) (width 0.3) (layer B.Cu) (net 15))
(segment (start 31.3787 79.869834) (end 31.342959 79.812953) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.54159 79.4) (end 29.549112 79.333243) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.654544 79.16545) (end 29.711425 79.129709) (width 0.3) (layer B.Cu) (net 15))
(segment (start 29.93 71.9) (end 30.83 71) (width 0.3) (layer F.Cu) (net 15))
(segment (start 30.83 71) (end 31.2125 71) (width 0.3) (layer F.Cu) (net 15))
(segment (start 28 71.9) (end 29.93 71.9) (width 0.3) (layer F.Cu) (net 15))
(segment (start 26 71.92) (end 27.98 71.92) (width 0.3) (layer F.Cu) (net 15))
(segment (start 27.98 71.92) (end 28 71.9) (width 0.3) (layer F.Cu) (net 15))
(segment (start 31.1125 74.1) (end 31.2125 74) (width 0.3) (layer F.Cu) (net 16) (status 30))
(segment (start 28 74.1) (end 31.1125 74.1) (width 0.3) (layer F.Cu) (net 16) (status 30))
(via (at 29.89 85.51) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 16))
(via (at 26.48 74.11) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 16))
(segment (start 27.99 74.11) (end 28 74.1) (width 0.3) (layer F.Cu) (net 16) (status 30))
(segment (start 26.48 74.11) (end 27.99 74.11) (width 0.3) (layer F.Cu) (net 16) (status 20))
(segment (start 29 84.62) (end 29.89 85.51) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27 82) (end 29 84) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.887046 81.06545) (end 26.934549 81.112953) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.830165 81.029709) (end 26.887046 81.06545) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.7 81) (end 26.766756 81.007521) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.3 81) (end 26.7 81) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.112953 80.934549) (end 26.169834 80.97029) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.06545 80.887046) (end 26.112953 80.934549) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.029709 80.830165) (end 26.06545 80.887046) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.112953 80.46545) (end 26.06545 80.512953) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.3 80.4) (end 26.233243 80.407521) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.7 80.4) (end 26.3 80.4) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.830166 80.37029) (end 27.766757 80.392478) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.007521 78.233243) (end 26 78.3) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.992478 81.233243) (end 27 81.3) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.169834 78.029709) (end 26.112953 78.06545) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.233243 80.992478) (end 26.3 81) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.112953 77.334549) (end 26.169834 77.37029) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.233243 78.007521) (end 26.169834 78.029709) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.112953 79.734549) (end 26.169834 79.77029) (width 0.3) (layer B.Cu) (net 16))
(segment (start 28 78.9) (end 27.992479 78.966756) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.830166 77.429709) (end 27.887047 77.46545) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.06545 78.112953) (end 26.029709 78.169834) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.3 77.4) (end 27.7 77.4) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.029709 78.169834) (end 26.007521 78.233243) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.887047 77.934549) (end 27.830166 77.97029) (width 0.3) (layer B.Cu) (net 16))
(segment (start 28 77.7) (end 27.992479 77.766756) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.934549 81.112953) (end 26.97029 81.169834) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.007521 79.433243) (end 26 79.5) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.169834 79.77029) (end 26.233243 79.792478) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.112953 78.06545) (end 26.06545 78.112953) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.7 78) (end 26.3 78) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.93455 77.512953) (end 27.970291 77.569834) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.97029 81.169834) (end 26.992478 81.233243) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.830165 76.77029) (end 26.766756 76.792478) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.93455 80.287046) (end 27.887047 80.334549) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.970291 79.969834) (end 27.992479 80.033243) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.887046 76.734549) (end 26.830165 76.77029) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27 76.5) (end 26.992478 76.566756) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27 74.63) (end 27 76.5) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.233243 77.392478) (end 26.3 77.4) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.007521 77.166756) (end 26.029709 77.230165) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29 84) (end 29 84.62) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.766757 77.992478) (end 27.7 78) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.233243 79.792478) (end 26.3 79.8) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.830166 79.829709) (end 27.887047 79.86545) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.48 74.11) (end 27 74.63) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26 77.1) (end 26.007521 77.166756) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27 81.3) (end 27 82) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.766757 77.407521) (end 27.830166 77.429709) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.992479 78.833243) (end 28 78.9) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.934549 76.687046) (end 26.887046 76.734549) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.970291 77.830165) (end 27.93455 77.887046) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.830166 77.97029) (end 27.766757 77.992478) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.169834 80.97029) (end 26.233243 80.992478) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26 80.7) (end 26.007521 80.766756) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.3 76.8) (end 26.233243 76.807521) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.3 78) (end 26.233243 78.007521) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.887047 77.46545) (end 27.93455 77.512953) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.029709 79.630165) (end 26.06545 79.687046) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.029709 77.230165) (end 26.06545 77.287046) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.233243 78.592478) (end 26.3 78.6) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.233243 79.207521) (end 26.169834 79.229709) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.766756 76.792478) (end 26.7 76.8) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.7 76.8) (end 26.3 76.8) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.766757 80.392478) (end 27.7 80.4) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.830166 78.629709) (end 27.887047 78.66545) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.007521 80.766756) (end 26.029709 80.830165) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.887047 79.86545) (end 27.93455 79.912953) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.992479 78.966756) (end 27.970291 79.030165) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.7 77.4) (end 27.766757 77.407521) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.93455 79.087046) (end 27.887047 79.134549) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.97029 76.630165) (end 26.934549 76.687046) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.007521 80.633243) (end 26 80.7) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.029709 80.569834) (end 26.007521 80.633243) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.112953 79.26545) (end 26.06545 79.312953) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.233243 76.807521) (end 26.169834 76.829709) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.7 79.8) (end 27.766757 79.807521) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.169834 77.37029) (end 26.233243 77.392478) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.169834 76.829709) (end 26.112953 76.86545) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.06545 77.287046) (end 26.112953 77.334549) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.887047 79.134549) (end 27.830166 79.17029) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.992478 76.566756) (end 26.97029 76.630165) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.06545 76.912953) (end 26.029709 76.969834) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.992479 77.766756) (end 27.970291 77.830165) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.7 79.2) (end 26.3 79.2) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.007521 77.033243) (end 26 77.1) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.766756 81.007521) (end 26.830165 81.029709) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26 78.3) (end 26.007521 78.366756) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.06545 80.512953) (end 26.029709 80.569834) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.007521 78.366756) (end 26.029709 78.430165) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.169834 80.429709) (end 26.112953 80.46545) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.06545 78.487046) (end 26.112953 78.534549) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.169834 78.57029) (end 26.233243 78.592478) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.93455 78.712953) (end 27.970291 78.769834) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.3 78.6) (end 27.7 78.6) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.7 78.6) (end 27.766757 78.607521) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.112953 78.534549) (end 26.169834 78.57029) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.766757 78.607521) (end 27.830166 78.629709) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.887047 78.66545) (end 27.93455 78.712953) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.029709 78.430165) (end 26.06545 78.487046) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.970291 78.769834) (end 27.992479 78.833243) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.3 79.8) (end 27.7 79.8) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.970291 79.030165) (end 27.93455 79.087046) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.830166 79.17029) (end 27.766757 79.192478) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.766757 79.192478) (end 27.7 79.2) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.992479 77.633243) (end 28 77.7) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.3 79.2) (end 26.233243 79.207521) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.970291 77.569834) (end 27.992479 77.633243) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.169834 79.229709) (end 26.112953 79.26545) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26 79.5) (end 26.007521 79.566756) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.029709 79.369834) (end 26.007521 79.433243) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.06545 79.312953) (end 26.029709 79.369834) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.93455 77.887046) (end 27.887047 77.934549) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.007521 79.566756) (end 26.029709 79.630165) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.06545 79.687046) (end 26.112953 79.734549) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.766757 79.807521) (end 27.830166 79.829709) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.992479 80.033243) (end 28 80.1) (width 0.3) (layer B.Cu) (net 16))
(segment (start 28 80.1) (end 27.992479 80.166756) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.233243 80.407521) (end 26.169834 80.429709) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.93455 79.912953) (end 27.970291 79.969834) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.992479 80.166756) (end 27.970291 80.230165) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.112953 76.86545) (end 26.06545 76.912953) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.970291 80.230165) (end 27.93455 80.287046) (width 0.3) (layer B.Cu) (net 16))
(segment (start 26.029709 76.969834) (end 26.007521 77.033243) (width 0.3) (layer B.Cu) (net 16))
(segment (start 27.887047 80.334549) (end 27.830166 80.37029) (width 0.3) (layer B.Cu) (net 16))
(segment (start 29.9 85.51) (end 29.89 85.51) (width 0.3) (layer F.Cu) (net 16))
(segment (start 38.16545 90.612953) (end 38.129709 90.669834) (width 0.3) (layer F.Cu) (net 16))
(segment (start 37.506268 91.805631) (end 37.493731 91.69437) (width 0.3) (layer F.Cu) (net 16))
(segment (start 38.4 90.5) (end 38.333243 90.507521) (width 0.3) (layer F.Cu) (net 16))
(segment (start 38.530165 90.529709) (end 38.466756 90.507521) (width 0.3) (layer F.Cu) (net 16))
(segment (start 38.587046 90.56545) (end 38.530165 90.529709) (width 0.3) (layer F.Cu) (net 16))
(segment (start 38.269834 90.529709) (end 38.212953 90.56545) (width 0.3) (layer F.Cu) (net 16))
(segment (start 38.129709 90.669834) (end 38.107521 90.733243) (width 0.3) (layer F.Cu) (net 16))
(segment (start 37.75 92) (end 37.694369 91.993732) (width 0.3) (layer F.Cu) (net 16))
(segment (start 38.869834 91.47029) (end 38.812953 91.434549) (width 0.3) (layer F.Cu) (net 16))
(segment (start 38.812953 91.434549) (end 38.76545 91.387046) (width 0.3) (layer F.Cu) (net 16))
(segment (start 38.67029 90.669834) (end 38.634549 90.612953) (width 0.3) (layer F.Cu) (net 16))
(segment (start 38.333243 90.507521) (end 38.269834 90.529709) (width 0.3) (layer F.Cu) (net 16))
(segment (start 38.1 90.8) (end 38.1 91.75) (width 0.3) (layer F.Cu) (net 16))
(segment (start 35.89 91.5) (end 29.9 85.51) (width 0.3) (layer F.Cu) (net 16))
(segment (start 38.692478 90.733243) (end 38.67029 90.669834) (width 0.3) (layer F.Cu) (net 16))
(segment (start 37.85 92) (end 37.75 92) (width 0.3) (layer F.Cu) (net 16))
(segment (start 39 91.5) (end 38.933243 91.492478) (width 0.3) (layer F.Cu) (net 16))
(segment (start 38.107521 90.733243) (end 38.1 90.8) (width 0.3) (layer F.Cu) (net 16))
(segment (start 38.466756 90.507521) (end 38.4 90.5) (width 0.3) (layer F.Cu) (net 16))
(segment (start 38.76545 91.387046) (end 38.729709 91.330165) (width 0.3) (layer F.Cu) (net 16))
(segment (start 38.7 90.8) (end 38.692478 90.733243) (width 0.3) (layer F.Cu) (net 16))
(segment (start 38.212953 90.56545) (end 38.16545 90.612953) (width 0.3) (layer F.Cu) (net 16))
(segment (start 38.707521 91.266756) (end 38.7 91.2) (width 0.3) (layer F.Cu) (net 16))
(segment (start 38.7 91.2) (end 38.7 90.8) (width 0.3) (layer F.Cu) (net 16))
(segment (start 38.1 91.75) (end 38.093731 91.805631) (width 0.3) (layer F.Cu) (net 16))
(segment (start 38.093731 91.805631) (end 38.075242 91.858471) (width 0.3) (layer F.Cu) (net 16))
(segment (start 38.045457 91.905873) (end 38.005872 91.945458) (width 0.3) (layer F.Cu) (net 16))
(segment (start 37.95847 91.975243) (end 37.90563 91.993732) (width 0.3) (layer F.Cu) (net 16))
(segment (start 38.933243 91.492478) (end 38.869834 91.47029) (width 0.3) (layer F.Cu) (net 16))
(segment (start 38.005872 91.945458) (end 37.95847 91.975243) (width 0.3) (layer F.Cu) (net 16))
(segment (start 37.90563 91.993732) (end 37.85 92) (width 0.3) (layer F.Cu) (net 16))
(segment (start 37.694369 91.993732) (end 37.641529 91.975243) (width 0.3) (layer F.Cu) (net 16))
(segment (start 40.825 91.5) (end 39 91.5) (width 0.3) (layer F.Cu) (net 16) (status 10))
(segment (start 37.641529 91.975243) (end 37.594127 91.945458) (width 0.3) (layer F.Cu) (net 16))
(segment (start 37.594127 91.945458) (end 37.554542 91.905873) (width 0.3) (layer F.Cu) (net 16))
(segment (start 37.35847 91.524758) (end 37.30563 91.506269) (width 0.3) (layer F.Cu) (net 16))
(segment (start 38.634549 90.612953) (end 38.587046 90.56545) (width 0.3) (layer F.Cu) (net 16))
(segment (start 37.554542 91.905873) (end 37.524757 91.858471) (width 0.3) (layer F.Cu) (net 16))
(segment (start 38.075242 91.858471) (end 38.045457 91.905873) (width 0.3) (layer F.Cu) (net 16))
(segment (start 37.445457 91.594128) (end 37.405872 91.554543) (width 0.3) (layer F.Cu) (net 16))
(segment (start 37.524757 91.858471) (end 37.506268 91.805631) (width 0.3) (layer F.Cu) (net 16))
(segment (start 37.493731 91.69437) (end 37.475242 91.64153) (width 0.3) (layer F.Cu) (net 16))
(segment (start 37.475242 91.64153) (end 37.445457 91.594128) (width 0.3) (layer F.Cu) (net 16))
(segment (start 38.729709 91.330165) (end 38.707521 91.266756) (width 0.3) (layer F.Cu) (net 16))
(segment (start 37.405872 91.554543) (end 37.35847 91.524758) (width 0.3) (layer F.Cu) (net 16))
(segment (start 37.30563 91.506269) (end 37.25 91.5) (width 0.3) (layer F.Cu) (net 16))
(segment (start 37.25 91.5) (end 35.89 91.5) (width 0.3) (layer F.Cu) (net 16))
(via (at 26.13 75.26) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 17))
(via (at 33.5 86.99) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 17))
(segment (start 40.825 89.5) (end 36.01 89.5) (width 0.3) (layer F.Cu) (net 17) (status 10))
(segment (start 33.749999 87.239999) (end 33.5 86.99) (width 0.3) (layer F.Cu) (net 17))
(segment (start 36.01 89.5) (end 33.749999 87.239999) (width 0.3) (layer F.Cu) (net 17))
(segment (start 23.899999 76.600001) (end 23.899999 75.600001) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.892477 76.666757) (end 23.899999 76.600001) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.834548 76.787047) (end 23.870289 76.730166) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.730164 76.870291) (end 23.787045 76.83455) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.666755 76.892479) (end 23.730164 76.870291) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.012952 76.965451) (end 23.069833 76.92971) (width 0.3) (layer B.Cu) (net 17))
(segment (start 22.965449 77.012954) (end 23.012952 76.965451) (width 0.3) (layer B.Cu) (net 17))
(segment (start 22.929708 77.069835) (end 22.965449 77.012954) (width 0.3) (layer B.Cu) (net 17))
(segment (start 22.90752 77.133244) (end 22.929708 77.069835) (width 0.3) (layer B.Cu) (net 17))
(segment (start 22.929708 77.330166) (end 22.90752 77.266757) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.069833 77.470291) (end 23.012952 77.43455) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.787045 76.83455) (end 23.834548 76.787047) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.133242 77.492479) (end 23.069833 77.470291) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.199999 77.500001) (end 23.133242 77.492479) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.149999 77.500001) (end 23.199999 77.500001) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.20563 77.506269) (end 24.149999 77.500001) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.25847 77.524758) (end 24.20563 77.506269) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.375242 77.64153) (end 24.345457 77.594128) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.399999 77.850001) (end 24.399999 77.750001) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.375242 77.958471) (end 24.393731 77.905631) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.345457 78.005873) (end 24.375242 77.958471) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.25847 78.075243) (end 24.305872 78.045458) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.012952 77.43455) (end 22.965449 77.387047) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.20563 78.093732) (end 24.25847 78.075243) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.149999 78.100001) (end 24.20563 78.093732) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.199999 78.100001) (end 24.149999 78.100001) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.069833 78.12971) (end 23.133242 78.107522) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.012952 78.165451) (end 23.069833 78.12971) (width 0.3) (layer B.Cu) (net 17))
(segment (start 22.965449 78.212954) (end 23.012952 78.165451) (width 0.3) (layer B.Cu) (net 17))
(segment (start 30.71 86.99) (end 29.99 86.99) (width 0.3) (layer B.Cu) (net 17))
(segment (start 30.840165 87.01971) (end 30.776756 86.997522) (width 0.3) (layer B.Cu) (net 17))
(segment (start 32.202478 86.223243) (end 32.18029 86.159834) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.393731 77.905631) (end 24.399999 77.850001) (width 0.3) (layer B.Cu) (net 17))
(segment (start 32.239709 86.820165) (end 32.217521 86.756756) (width 0.3) (layer B.Cu) (net 17))
(segment (start 31.002478 87.223244) (end 30.98029 87.159835) (width 0.3) (layer B.Cu) (net 17))
(segment (start 31.122953 87.92455) (end 31.07545 87.877047) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.133242 78.107522) (end 23.199999 78.100001) (width 0.3) (layer B.Cu) (net 17))
(segment (start 30.897046 87.055451) (end 30.840165 87.01971) (width 0.3) (layer B.Cu) (net 17))
(segment (start 31.243243 87.982479) (end 31.179834 87.960291) (width 0.3) (layer B.Cu) (net 17))
(segment (start 31.01 87.69) (end 31.01 87.29) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.133242 79.307522) (end 23.199999 79.300001) (width 0.3) (layer B.Cu) (net 17))
(segment (start 31.440165 87.960291) (end 31.376756 87.982479) (width 0.3) (layer B.Cu) (net 17))
(segment (start 31.544549 87.877047) (end 31.497046 87.92455) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.199999 78.700001) (end 23.133242 78.692479) (width 0.3) (layer B.Cu) (net 17))
(segment (start 31.017521 87.756757) (end 31.01 87.69) (width 0.3) (layer B.Cu) (net 17))
(segment (start 32.21 86.29) (end 32.202478 86.223243) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.345457 77.594128) (end 24.305872 77.554543) (width 0.3) (layer B.Cu) (net 17))
(segment (start 31.07545 87.877047) (end 31.039709 87.820166) (width 0.3) (layer B.Cu) (net 17))
(segment (start 31.602478 87.756757) (end 31.58029 87.820166) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.834549 79.187047) (end 24.87029 79.130166) (width 0.3) (layer B.Cu) (net 17))
(segment (start 22.965449 77.387047) (end 22.929708 77.330166) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.133242 78.692479) (end 23.069833 78.670291) (width 0.3) (layer B.Cu) (net 17))
(segment (start 31.497046 87.92455) (end 31.440165 87.960291) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.133242 76.907522) (end 23.199999 76.900001) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.393731 77.69437) (end 24.375242 77.64153) (width 0.3) (layer B.Cu) (net 17))
(segment (start 31.61 86.29) (end 31.61 87.69) (width 0.3) (layer B.Cu) (net 17))
(segment (start 31.639709 86.159834) (end 31.617521 86.223243) (width 0.3) (layer B.Cu) (net 17))
(segment (start 31.779834 86.019709) (end 31.722953 86.05545) (width 0.3) (layer B.Cu) (net 17))
(segment (start 31.01 87.29) (end 31.002478 87.223244) (width 0.3) (layer B.Cu) (net 17))
(segment (start 32.322953 86.924549) (end 32.27545 86.877046) (width 0.3) (layer B.Cu) (net 17))
(segment (start 31.61 87.69) (end 31.602478 87.756757) (width 0.3) (layer B.Cu) (net 17))
(segment (start 32.21 86.69) (end 32.21 86.29) (width 0.3) (layer B.Cu) (net 17))
(segment (start 32.379834 86.96029) (end 32.322953 86.924549) (width 0.3) (layer B.Cu) (net 17))
(segment (start 31.31 87.99) (end 31.243243 87.982479) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.399999 77.750001) (end 24.393731 77.69437) (width 0.3) (layer B.Cu) (net 17))
(segment (start 32.27545 86.877046) (end 32.239709 86.820165) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.730165 78.72971) (end 24.666756 78.707522) (width 0.3) (layer B.Cu) (net 17))
(segment (start 32.144549 86.102953) (end 32.097046 86.05545) (width 0.3) (layer B.Cu) (net 17))
(segment (start 33.5 86.99) (end 32.51 86.99) (width 0.3) (layer B.Cu) (net 17))
(segment (start 32.097046 86.05545) (end 32.040165 86.019709) (width 0.3) (layer B.Cu) (net 17))
(segment (start 30.776756 86.997522) (end 30.71 86.99) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.87029 79.130166) (end 24.892478 79.066757) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.133242 79.892479) (end 23.069833 79.870291) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.305872 78.045458) (end 24.345457 78.005873) (width 0.3) (layer B.Cu) (net 17))
(segment (start 30.944549 87.102954) (end 30.897046 87.055451) (width 0.3) (layer B.Cu) (net 17))
(segment (start 32.443243 86.982478) (end 32.379834 86.96029) (width 0.3) (layer B.Cu) (net 17))
(segment (start 29.99 86.99) (end 23.899999 80.899999) (width 0.3) (layer B.Cu) (net 17))
(segment (start 32.217521 86.756756) (end 32.21 86.69) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.899999 75.600001) (end 24.5 75) (width 0.3) (layer B.Cu) (net 17))
(segment (start 32.51 86.99) (end 32.443243 86.982478) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.012952 79.83455) (end 22.965449 79.787047) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.5 75) (end 25.87 75) (width 0.3) (layer B.Cu) (net 17))
(segment (start 31.67545 86.102953) (end 31.639709 86.159834) (width 0.3) (layer B.Cu) (net 17))
(segment (start 31.722953 86.05545) (end 31.67545 86.102953) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.599999 76.900001) (end 23.666755 76.892479) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.599999 78.700001) (end 23.199999 78.700001) (width 0.3) (layer B.Cu) (net 17))
(segment (start 31.843243 85.997521) (end 31.779834 86.019709) (width 0.3) (layer B.Cu) (net 17))
(segment (start 31.179834 87.960291) (end 31.122953 87.92455) (width 0.3) (layer B.Cu) (net 17))
(segment (start 31.91 85.99) (end 31.843243 85.997521) (width 0.3) (layer B.Cu) (net 17))
(segment (start 31.617521 86.223243) (end 31.61 86.29) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.870289 80.069835) (end 23.834548 80.012954) (width 0.3) (layer B.Cu) (net 17))
(segment (start 30.98029 87.159835) (end 30.944549 87.102954) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.834548 80.012954) (end 23.787045 79.965451) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.069833 76.92971) (end 23.133242 76.907522) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.730164 79.92971) (end 23.666755 79.907522) (width 0.3) (layer B.Cu) (net 17))
(segment (start 32.18029 86.159834) (end 32.144549 86.102953) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.787046 78.765451) (end 24.730165 78.72971) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.899999 80.899999) (end 23.899999 80.200001) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.899999 80.200001) (end 23.892477 80.133244) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.892477 80.133244) (end 23.870289 80.069835) (width 0.3) (layer B.Cu) (net 17))
(segment (start 22.899999 79.600001) (end 22.90752 79.533244) (width 0.3) (layer B.Cu) (net 17))
(segment (start 22.90752 79.533244) (end 22.929708 79.469835) (width 0.3) (layer B.Cu) (net 17))
(segment (start 31.976756 85.997521) (end 31.91 85.99) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.666755 79.907522) (end 23.599999 79.900001) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.787045 79.965451) (end 23.730164 79.92971) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.199999 79.900001) (end 23.133242 79.892479) (width 0.3) (layer B.Cu) (net 17))
(segment (start 31.376756 87.982479) (end 31.31 87.99) (width 0.3) (layer B.Cu) (net 17))
(segment (start 22.965449 79.412954) (end 23.012952 79.365451) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.870289 76.730166) (end 23.892477 76.666757) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.069833 79.870291) (end 23.012952 79.83455) (width 0.3) (layer B.Cu) (net 17))
(segment (start 22.965449 79.787047) (end 22.929708 79.730166) (width 0.3) (layer B.Cu) (net 17))
(segment (start 31.58029 87.820166) (end 31.544549 87.877047) (width 0.3) (layer B.Cu) (net 17))
(segment (start 22.929708 79.730166) (end 22.90752 79.666757) (width 0.3) (layer B.Cu) (net 17))
(segment (start 22.90752 79.666757) (end 22.899999 79.600001) (width 0.3) (layer B.Cu) (net 17))
(segment (start 32.040165 86.019709) (end 31.976756 85.997521) (width 0.3) (layer B.Cu) (net 17))
(segment (start 22.929708 79.469835) (end 22.965449 79.412954) (width 0.3) (layer B.Cu) (net 17))
(segment (start 22.90752 77.266757) (end 22.899999 77.200001) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.305872 77.554543) (end 24.25847 77.524758) (width 0.3) (layer B.Cu) (net 17))
(segment (start 31.039709 87.820166) (end 31.017521 87.756757) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.012952 79.365451) (end 23.069833 79.32971) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.069833 79.32971) (end 23.133242 79.307522) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.199999 79.300001) (end 24.599999 79.300001) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.599999 79.300001) (end 24.666756 79.292479) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.730165 79.270291) (end 24.787046 79.23455) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.199999 76.900001) (end 23.599999 76.900001) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.666756 79.292479) (end 24.730165 79.270291) (width 0.3) (layer B.Cu) (net 17))
(segment (start 22.90752 78.466757) (end 22.899999 78.400001) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.787046 79.23455) (end 24.834549 79.187047) (width 0.3) (layer B.Cu) (net 17))
(segment (start 22.90752 78.333244) (end 22.929708 78.269835) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.892478 79.066757) (end 24.899999 79.000001) (width 0.3) (layer B.Cu) (net 17))
(segment (start 22.899999 77.200001) (end 22.90752 77.133244) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.899999 79.000001) (end 24.892478 78.933244) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.892478 78.933244) (end 24.87029 78.869835) (width 0.3) (layer B.Cu) (net 17))
(segment (start 25.87 75) (end 26.13 75.26) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.87029 78.869835) (end 24.834549 78.812954) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.834549 78.812954) (end 24.787046 78.765451) (width 0.3) (layer B.Cu) (net 17))
(segment (start 24.666756 78.707522) (end 24.599999 78.700001) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.599999 79.900001) (end 23.199999 79.900001) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.069833 78.670291) (end 23.012952 78.63455) (width 0.3) (layer B.Cu) (net 17))
(segment (start 23.012952 78.63455) (end 22.965449 78.587047) (width 0.3) (layer B.Cu) (net 17))
(segment (start 22.965449 78.587047) (end 22.929708 78.530166) (width 0.3) (layer B.Cu) (net 17))
(segment (start 22.929708 78.530166) (end 22.90752 78.466757) (width 0.3) (layer B.Cu) (net 17))
(segment (start 22.899999 78.400001) (end 22.90752 78.333244) (width 0.3) (layer B.Cu) (net 17))
(segment (start 22.929708 78.269835) (end 22.965449 78.212954) (width 0.3) (layer B.Cu) (net 17))
(segment (start 30.9125 75.2) (end 31.2125 75.5) (width 0.3) (layer F.Cu) (net 17))
(segment (start 29 75.2) (end 30.9125 75.2) (width 0.3) (layer F.Cu) (net 17))
(segment (start 26.13 75.26) (end 28.94 75.26) (width 0.3) (layer F.Cu) (net 17))
(segment (start 28.94 75.26) (end 29 75.2) (width 0.3) (layer F.Cu) (net 17))
(segment (start 30.25 77) (end 31.2125 77) (width 0.3) (layer F.Cu) (net 18) (status 20))
(segment (start 29.55 76.3) (end 30.25 77) (width 0.3) (layer F.Cu) (net 18))
(via (at 34.06 84.38) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 18))
(segment (start 34.06 84.38) (end 33.250001 83.570001) (width 0.3) (layer B.Cu) (net 18))
(via (at 33.5 79) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 18))
(segment (start 33.250001 79.249999) (end 33.5 79) (width 0.3) (layer B.Cu) (net 18))
(segment (start 33.250001 83.570001) (end 33.250001 79.249999) (width 0.3) (layer B.Cu) (net 18))
(segment (start 38.326447 89) (end 34.06 84.733553) (width 0.3) (layer F.Cu) (net 18))
(segment (start 40.825 89) (end 38.326447 89) (width 0.3) (layer F.Cu) (net 18) (status 10))
(segment (start 34.06 84.733553) (end 34.06 84.38) (width 0.3) (layer F.Cu) (net 18))
(segment (start 29.55 77.175) (end 31.375 79) (width 0.3) (layer F.Cu) (net 18))
(segment (start 29.55 76.3) (end 29.55 77.175) (width 0.3) (layer F.Cu) (net 18))
(segment (start 31.375 79) (end 33.5 79) (width 0.3) (layer F.Cu) (net 18))
(segment (start 29 76.3) (end 29.55 76.3) (width 0.3) (layer F.Cu) (net 18))
(segment (start 24.2125 50) (end 24.2125 52) (width 0.3) (layer F.Cu) (net 19) (status 20))
(segment (start 24.2125 49.5) (end 24.2125 50) (width 0.3) (layer F.Cu) (net 19) (status 10))
(segment (start 55.925 101.675) (end 54.5 101.675) (width 0.3) (layer F.Cu) (net 20))
(segment (start 56.25 102) (end 55.925 101.675) (width 0.3) (layer F.Cu) (net 20))
(segment (start 56.7125 102) (end 56.25 102) (width 0.3) (layer F.Cu) (net 20))
(segment (start 56.5 103) (end 56.5 102.25) (width 0.3) (layer F.Cu) (net 20))
(segment (start 60.600001 107.100001) (end 56.5 103) (width 0.3) (layer F.Cu) (net 20))
(segment (start 56.5 102.25) (end 55.925 101.675) (width 0.3) (layer F.Cu) (net 20))
(segment (start 73.75 102.5375) (end 73.75 104.4625) (width 0.3) (layer F.Cu) (net 20))
(segment (start 70.5375 104.4625) (end 67.899999 107.100001) (width 0.3) (layer F.Cu) (net 20))
(segment (start 73.75 104.4625) (end 70.5375 104.4625) (width 0.3) (layer F.Cu) (net 20))
(segment (start 67 107) (end 67 105) (width 0.25) (layer F.Cu) (net 20))
(segment (start 66.899999 107.100001) (end 67 107) (width 0.25) (layer F.Cu) (net 20))
(segment (start 67.899999 107.100001) (end 66.899999 107.100001) (width 0.3) (layer F.Cu) (net 20))
(segment (start 66.899999 107.100001) (end 60.600001 107.100001) (width 0.3) (layer F.Cu) (net 20))
(segment (start 80.75 42.25) (end 80.75 33.75) (width 1) (layer F.Cu) (net 21))
(segment (start 91 52.5) (end 80.75 42.25) (width 1) (layer F.Cu) (net 21))
(segment (start 91 67.75) (end 91 52.5) (width 1) (layer F.Cu) (net 21))
(segment (start 91 42.75) (end 91 41) (width 1) (layer F.Cu) (net 22))
(segment (start 91 41) (end 91 42) (width 1) (layer F.Cu) (net 22))
(segment (start 91 42.75) (end 91 38) (width 1) (layer F.Cu) (net 22))
(segment (start 91 45.25) (end 91 42.75) (width 1) (layer F.Cu) (net 22))
(segment (start 80.75 23) (end 91 23) (width 1) (layer F.Cu) (net 23))
(segment (start 21.12 92.88) (end 23.96 92.88) (width 0.3) (layer F.Cu) (net 24))
(segment (start 38.45 107.3) (end 36.25 109.5) (width 0.3) (layer F.Cu) (net 24))
(segment (start 38.45 105.85) (end 38.45 107.3) (width 0.3) (layer F.Cu) (net 24))
(segment (start 23.388002 109.5) (end 19.5 105.611998) (width 0.3) (layer F.Cu) (net 24))
(segment (start 36.25 109.5) (end 23.388002 109.5) (width 0.3) (layer F.Cu) (net 24))
(segment (start 19.5 94.5) (end 21.12 92.88) (width 0.3) (layer F.Cu) (net 24))
(segment (start 19.5 105.611998) (end 19.5 94.5) (width 0.3) (layer F.Cu) (net 24))
(segment (start 21.83 95.42) (end 23.96 95.42) (width 0.3) (layer F.Cu) (net 25))
(segment (start 20.75 96.5) (end 21.83 95.42) (width 0.3) (layer F.Cu) (net 25))
(segment (start 36.55 105.85) (end 36.55 107.95) (width 0.3) (layer F.Cu) (net 25))
(segment (start 35.75 108.75) (end 24.5 108.75) (width 0.3) (layer F.Cu) (net 25))
(segment (start 24.5 108.75) (end 20.75 105) (width 0.3) (layer F.Cu) (net 25))
(segment (start 36.55 107.95) (end 35.75 108.75) (width 0.3) (layer F.Cu) (net 25))
(segment (start 20.75 105) (end 20.75 96.5) (width 0.3) (layer F.Cu) (net 25))
(segment (start 22 99.92) (end 23.96 97.96) (width 0.3) (layer F.Cu) (net 26))
(segment (start 22 104.25) (end 22 99.92) (width 0.3) (layer F.Cu) (net 26))
(segment (start 25.25 107.5) (end 22 104.25) (width 0.3) (layer F.Cu) (net 26))
(segment (start 34.7 107.55) (end 34.25 108) (width 0.3) (layer F.Cu) (net 26))
(segment (start 32.75 108) (end 32.25 107.5) (width 0.3) (layer F.Cu) (net 26))
(segment (start 34.7 105.85) (end 34.7 107.55) (width 0.3) (layer F.Cu) (net 26))
(segment (start 32.25 107.5) (end 25.25 107.5) (width 0.3) (layer F.Cu) (net 26))
(segment (start 34.25 108) (end 32.75 108) (width 0.3) (layer F.Cu) (net 26))
(segment (start 23.88 100.58) (end 23.96 100.5) (width 0.3) (layer F.Cu) (net 27) (status 30))
(segment (start 23.66 100.2) (end 23.96 100.5) (width 0.25) (layer B.Cu) (net 27) (status 30))
(segment (start 23.96 100.5) (end 23.96 103.21) (width 0.3) (layer F.Cu) (net 27))
(segment (start 26.6 105.85) (end 32.8 105.85) (width 0.3) (layer F.Cu) (net 27))
(segment (start 23.96 103.21) (end 26.6 105.85) (width 0.3) (layer F.Cu) (net 27))
(via (at 40.5 76.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 28))
(via (at 38.375 76.625) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 28))
(segment (start 38.5 76.5) (end 38.375 76.625) (width 0.3) (layer B.Cu) (net 28))
(segment (start 40.5 76.5) (end 38.5 76.5) (width 0.3) (layer B.Cu) (net 28))
(segment (start 38.2875 76.7125) (end 38.2875 78) (width 0.3) (layer F.Cu) (net 28))
(segment (start 38.375 76.625) (end 38.2875 76.7125) (width 0.3) (layer F.Cu) (net 28))
(segment (start 38.375 73.49) (end 38.375 76.625) (width 0.3) (layer F.Cu) (net 28))
(segment (start 38.73 73.135) (end 38.375 73.49) (width 0.3) (layer F.Cu) (net 28))
(segment (start 40.749999 76.749999) (end 40.5 76.5) (width 0.3) (layer F.Cu) (net 28))
(segment (start 44 85) (end 44.28751 84.71249) (width 0.3) (layer F.Cu) (net 28))
(segment (start 44 86.325) (end 44 85) (width 0.3) (layer F.Cu) (net 28))
(segment (start 44.28751 79.78751) (end 41.249999 76.749999) (width 0.3) (layer F.Cu) (net 28))
(segment (start 44.28751 84.71249) (end 44.28751 79.78751) (width 0.3) (layer F.Cu) (net 28))
(segment (start 41.249999 76.749999) (end 40.749999 76.749999) (width 0.3) (layer F.Cu) (net 28))
(via (at 39.73 78.995) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 29))
(segment (start 44.386447 88.54) (end 44.74 88.54) (width 0.3) (layer F.Cu) (net 29))
(segment (start 39.73 78.995) (end 45.609999 84.874999) (width 0.3) (layer B.Cu) (net 29))
(segment (start 45.609999 88.023554) (end 45.093553 88.54) (width 0.3) (layer B.Cu) (net 29))
(segment (start 45.609999 84.874999) (end 45.609999 88.023554) (width 0.3) (layer B.Cu) (net 29))
(segment (start 45.093553 88.54) (end 44.74 88.54) (width 0.3) (layer B.Cu) (net 29))
(segment (start 40.825 88) (end 42 88) (width 0.3) (layer F.Cu) (net 29) (status 10))
(segment (start 42.54 88.54) (end 44.386447 88.54) (width 0.3) (layer F.Cu) (net 29))
(segment (start 42 88) (end 42.54 88.54) (width 0.3) (layer F.Cu) (net 29))
(via (at 44.74 88.54) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 29))
(segment (start 40.25 74.155) (end 41.27 73.135) (width 0.3) (layer F.Cu) (net 29))
(segment (start 40.25 75.75) (end 40.25 74.155) (width 0.3) (layer F.Cu) (net 29))
(segment (start 39.73 78.995) (end 39.73 76.27) (width 0.3) (layer F.Cu) (net 29))
(segment (start 39.73 76.27) (end 40.25 75.75) (width 0.3) (layer F.Cu) (net 29))
(segment (start 40.2125 79.4775) (end 39.73 78.995) (width 0.3) (layer F.Cu) (net 29))
(segment (start 40.2125 80.25) (end 40.2125 79.4775) (width 0.3) (layer F.Cu) (net 29))
(segment (start 39.88 70.475) (end 41.27 71.865) (width 0.3) (layer F.Cu) (net 30))
(segment (start 46 79.63) (end 45.39 79.02) (width 0.3) (layer F.Cu) (net 30))
(segment (start 39.88 68.6) (end 39.88 70.475) (width 0.3) (layer F.Cu) (net 30))
(segment (start 44.33 66.68) (end 41.8 66.68) (width 0.3) (layer F.Cu) (net 30))
(segment (start 41.8 66.68) (end 39.88 68.6) (width 0.3) (layer F.Cu) (net 30))
(segment (start 46 86.325) (end 46 79.63) (width 0.3) (layer F.Cu) (net 30))
(segment (start 45.39 67.74) (end 44.33 66.68) (width 0.3) (layer F.Cu) (net 30))
(segment (start 45.39 79.02) (end 45.39 67.74) (width 0.3) (layer F.Cu) (net 30))
(via (at 43.47 67.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 31))
(via (at 39.73 66.56) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 31))
(segment (start 38.73 67.56) (end 39.73 66.56) (width 0.3) (layer F.Cu) (net 31))
(segment (start 38.73 71.865) (end 38.73 67.56) (width 0.3) (layer F.Cu) (net 31) (status 10))
(segment (start 40.67 67.5) (end 39.73 66.56) (width 0.25) (layer B.Cu) (net 31))
(segment (start 43.47 67.5) (end 40.67 67.5) (width 0.25) (layer B.Cu) (net 31))
(segment (start 44.89 68.92) (end 43.47 67.5) (width 0.3) (layer F.Cu) (net 31))
(segment (start 45.5 86.325) (end 45.5 79.97) (width 0.3) (layer F.Cu) (net 31))
(segment (start 44.89 79.36) (end 44.89 68.92) (width 0.3) (layer F.Cu) (net 31))
(segment (start 45.5 79.97) (end 44.89 79.36) (width 0.3) (layer F.Cu) (net 31))
(via (at 47.25 97.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 32))
(via (at 37.73 70.94) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 32))
(segment (start 38.5 70) (end 38.025 70) (width 0.3) (layer B.Cu) (net 32) (status 30))
(segment (start 37.46 71.21) (end 37.480001 71.189999) (width 0.3) (layer F.Cu) (net 32))
(segment (start 37.480001 71.189999) (end 37.73 70.94) (width 0.3) (layer F.Cu) (net 32))
(segment (start 37.73 70.586447) (end 37.73 70.94) (width 0.3) (layer B.Cu) (net 32))
(segment (start 37.46 71.865) (end 37.46 71.21) (width 0.3) (layer F.Cu) (net 32) (status 10))
(segment (start 38.025 70) (end 37.73 70.295) (width 0.3) (layer B.Cu) (net 32) (status 10))
(segment (start 37.73 70.295) (end 37.73 70.586447) (width 0.3) (layer B.Cu) (net 32))
(via (at 45.28 94.64) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 32))
(segment (start 45.28 95.28) (end 45.28 94.64) (width 0.3) (layer F.Cu) (net 32))
(segment (start 47.25 97.25) (end 45.28 95.28) (width 0.3) (layer F.Cu) (net 32))
(segment (start 45.28 94.286447) (end 45.28 94.64) (width 0.3) (layer B.Cu) (net 32))
(segment (start 45.28 92.56) (end 45.28 94.286447) (width 0.3) (layer B.Cu) (net 32))
(segment (start 37.73 70.94) (end 37.73 85.01) (width 0.3) (layer B.Cu) (net 32))
(segment (start 37.73 85.01) (end 45.28 92.56) (width 0.3) (layer B.Cu) (net 32))
(via (at 48.82 99.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 32))
(segment (start 49 101.675) (end 49 99.93) (width 0.3) (layer F.Cu) (net 32) (status 10))
(segment (start 48.82 98.82) (end 48.82 99.75) (width 0.3) (layer B.Cu) (net 32))
(segment (start 49 99.93) (end 48.82 99.75) (width 0.3) (layer F.Cu) (net 32))
(segment (start 47.25 97.25) (end 48.82 98.82) (width 0.3) (layer B.Cu) (net 32))
(segment (start 67 74.5) (end 66.5 74) (width 0.3) (layer F.Cu) (net 33) (status 30))
(segment (start 67 77.5) (end 67 74.5) (width 0.3) (layer F.Cu) (net 33) (status 30))
(segment (start 20.96 61.54) (end 47.2 61.54) (width 0.3) (layer B.Cu) (net 34) (status 10))
(segment (start 47.2 61.54) (end 49.55 59.19) (width 0.3) (layer B.Cu) (net 34))
(segment (start 55.61 59.19) (end 57.42 61) (width 0.3) (layer B.Cu) (net 34) (status 20))
(segment (start 49.55 59.19) (end 55.61 59.19) (width 0.3) (layer B.Cu) (net 34))
(segment (start 57.42 61) (end 57.42 57.6325) (width 0.3) (layer F.Cu) (net 34))
(segment (start 57.42 57.6325) (end 55.2875 55.5) (width 0.3) (layer F.Cu) (net 34))
(segment (start 59.96 64.55) (end 59.96 63.54) (width 0.3) (layer F.Cu) (net 35))
(segment (start 56.78 75.91) (end 56.78 67.73) (width 0.3) (layer F.Cu) (net 35))
(segment (start 56.78 67.73) (end 59.96 64.55) (width 0.3) (layer F.Cu) (net 35))
(segment (start 52.85 78.675) (end 54.015 78.675) (width 0.3) (layer F.Cu) (net 35))
(segment (start 54.015 78.675) (end 56.78 75.91) (width 0.3) (layer F.Cu) (net 35))
(segment (start 56.11 64.85) (end 57.42 63.54) (width 0.3) (layer F.Cu) (net 36) (status 20))
(segment (start 56.11 75.2) (end 56.11 64.85) (width 0.3) (layer F.Cu) (net 36))
(segment (start 52.85 76.135) (end 55.175 76.135) (width 0.3) (layer F.Cu) (net 36) (status 10))
(segment (start 55.175 76.135) (end 56.11 75.2) (width 0.3) (layer F.Cu) (net 36))
(via (at 59.28 68.19) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 37))
(segment (start 59.505 76.135) (end 59.28 75.91) (width 0.3) (layer F.Cu) (net 37))
(segment (start 59.030001 67.940001) (end 59.28 68.19) (width 0.3) (layer B.Cu) (net 37))
(segment (start 54.88 61) (end 56.13 62.25) (width 0.3) (layer B.Cu) (net 37))
(segment (start 62.15 76.135) (end 59.505 76.135) (width 0.3) (layer F.Cu) (net 37))
(segment (start 59.28 75.91) (end 59.28 68.543553) (width 0.3) (layer F.Cu) (net 37))
(segment (start 56.13 65.04) (end 59.030001 67.940001) (width 0.3) (layer B.Cu) (net 37))
(segment (start 59.28 68.543553) (end 59.28 68.19) (width 0.3) (layer F.Cu) (net 37))
(segment (start 56.13 62.25) (end 56.13 65.04) (width 0.3) (layer B.Cu) (net 37))
(segment (start 55.28 63.94) (end 54.88 63.54) (width 0.3) (layer F.Cu) (net 38) (status 30))
(segment (start 55.28 73.51) (end 55.28 63.94) (width 0.3) (layer F.Cu) (net 38) (status 20))
(segment (start 52.85 73.595) (end 55.195 73.595) (width 0.3) (layer F.Cu) (net 38) (status 10))
(segment (start 55.195 73.595) (end 55.28 73.51) (width 0.3) (layer F.Cu) (net 38))
(via (at 58.56 69.75) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 39))
(segment (start 62.15 78.675) (end 59.315 78.675) (width 0.3) (layer F.Cu) (net 39))
(segment (start 58.310001 69.500001) (end 58.56 69.75) (width 0.3) (layer B.Cu) (net 39))
(segment (start 53.56 62.22) (end 53.56 64.75) (width 0.3) (layer B.Cu) (net 39))
(segment (start 58.56 70.103553) (end 58.56 69.75) (width 0.3) (layer F.Cu) (net 39))
(segment (start 53.56 64.75) (end 58.310001 69.500001) (width 0.3) (layer B.Cu) (net 39))
(segment (start 58.56 77.92) (end 58.56 70.103553) (width 0.3) (layer F.Cu) (net 39))
(segment (start 59.315 78.675) (end 58.56 77.92) (width 0.3) (layer F.Cu) (net 39))
(segment (start 52.34 61) (end 53.56 62.22) (width 0.3) (layer B.Cu) (net 39))
(segment (start 54.405 71.055) (end 52.85 71.055) (width 0.3) (layer F.Cu) (net 40) (status 20))
(segment (start 54.53 70.93) (end 54.405 71.055) (width 0.3) (layer F.Cu) (net 40))
(segment (start 52.34 63.54) (end 52.34 65.63) (width 0.3) (layer F.Cu) (net 40) (status 10))
(segment (start 54.53 67.82) (end 54.53 70.93) (width 0.3) (layer F.Cu) (net 40))
(segment (start 52.34 65.63) (end 54.53 67.82) (width 0.3) (layer F.Cu) (net 40))
(segment (start 84.7125 98) (end 84.7125 96) (width 0.3) (layer B.Cu) (net 41) (status 30))
(via (at 61.75 95.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 41))
(segment (start 64.5 98.25) (end 61.999999 95.749999) (width 0.3) (layer B.Cu) (net 41))
(segment (start 84.7125 108.0375) (end 83.5 109.25) (width 0.3) (layer B.Cu) (net 41))
(segment (start 61.999999 95.749999) (end 61.75 95.5) (width 0.3) (layer B.Cu) (net 41))
(segment (start 64.5 108) (end 64.5 98.25) (width 0.3) (layer B.Cu) (net 41))
(segment (start 84.7125 98) (end 84.7125 108.0375) (width 0.3) (layer B.Cu) (net 41))
(segment (start 65.75 109.25) (end 64.5 108) (width 0.3) (layer B.Cu) (net 41))
(segment (start 83.5 109.25) (end 65.75 109.25) (width 0.3) (layer B.Cu) (net 41))
(segment (start 61.25 95) (end 61.75 95.5) (width 0.3) (layer F.Cu) (net 41))
(segment (start 59 95) (end 61.25 95) (width 0.3) (layer F.Cu) (net 41))
(segment (start 58.5 95.5) (end 59 95) (width 0.3) (layer F.Cu) (net 41))
(segment (start 56.175 95.5) (end 58.5 95.5) (width 0.3) (layer F.Cu) (net 41))
(via (at 27 86) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 42))
(via (at 27.5 56) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 42))
(segment (start 27.5 56) (end 25.7875 56) (width 0.3) (layer F.Cu) (net 42) (status 20))
(segment (start 21 80) (end 21 65.881996) (width 0.3) (layer B.Cu) (net 42))
(segment (start 21 65.881996) (end 19.37 64.251996) (width 0.3) (layer B.Cu) (net 42))
(segment (start 24.4 56) (end 27.5 56) (width 0.3) (layer B.Cu) (net 42))
(segment (start 27 86) (end 21 80) (width 0.3) (layer B.Cu) (net 42))
(segment (start 19.37 64.251996) (end 19.37 61.03) (width 0.3) (layer B.Cu) (net 42))
(segment (start 19.37 61.03) (end 24.4 56) (width 0.3) (layer B.Cu) (net 42))
(segment (start 29.75 88.75) (end 27 86) (width 0.3) (layer F.Cu) (net 42))
(segment (start 34.04 94.5) (end 33.64 94.1) (width 0.3) (layer F.Cu) (net 42))
(segment (start 33.64 94.1) (end 31.1 94.1) (width 0.3) (layer F.Cu) (net 42))
(segment (start 29.75 92.75) (end 29.75 88.75) (width 0.3) (layer F.Cu) (net 42))
(segment (start 40.825 94.5) (end 34.04 94.5) (width 0.3) (layer F.Cu) (net 42))
(segment (start 31.1 94.1) (end 29.75 92.75) (width 0.3) (layer F.Cu) (net 42))
(via (at 27 52) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 43))
(segment (start 27 52) (end 25.7875 52) (width 0.3) (layer F.Cu) (net 43) (status 20))
(segment (start 27 52) (end 44.5 52) (width 0.3) (layer B.Cu) (net 43))
(segment (start 44.5 52) (end 47.750001 55.250001) (width 0.3) (layer B.Cu) (net 43))
(via (at 48 55.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 43))
(segment (start 47.750001 55.250001) (end 48 55.5) (width 0.3) (layer B.Cu) (net 43))
(via (at 53.21 67.46) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 43))
(segment (start 48 62.25) (end 52.960001 67.210001) (width 0.3) (layer F.Cu) (net 43))
(segment (start 52.960001 67.210001) (end 53.21 67.46) (width 0.3) (layer F.Cu) (net 43))
(segment (start 48 55.5) (end 48 62.25) (width 0.3) (layer F.Cu) (net 43))
(segment (start 56.4 82.02) (end 57.310001 82.930001) (width 0.3) (layer B.Cu) (net 43))
(segment (start 60.86 91.27) (end 60.86 86.126447) (width 0.3) (layer F.Cu) (net 43))
(via (at 57.56 83.18) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 43))
(segment (start 57.63 94.5) (end 60.86 91.27) (width 0.3) (layer F.Cu) (net 43))
(segment (start 53.21 67.46) (end 56.4 70.65) (width 0.3) (layer B.Cu) (net 43))
(segment (start 56.175 94.5) (end 57.63 94.5) (width 0.3) (layer F.Cu) (net 43))
(segment (start 57.913553 83.18) (end 57.56 83.18) (width 0.3) (layer F.Cu) (net 43))
(segment (start 56.4 70.65) (end 56.4 82.02) (width 0.3) (layer B.Cu) (net 43))
(segment (start 60.86 86.126447) (end 57.913553 83.18) (width 0.3) (layer F.Cu) (net 43))
(segment (start 57.310001 82.930001) (end 57.56 83.18) (width 0.3) (layer B.Cu) (net 43))
(segment (start 56.175 95) (end 58.08 95) (width 0.3) (layer F.Cu) (net 44) (status 10))
(segment (start 58.08 95) (end 61.56 91.52) (width 0.3) (layer F.Cu) (net 44))
(segment (start 61.56 87.2275) (end 66 82.7875) (width 0.3) (layer F.Cu) (net 44) (status 20))
(segment (start 61.56 91.52) (end 61.56 87.2275) (width 0.3) (layer F.Cu) (net 44))
(segment (start 59.975 101.2375) (end 60.2125 101) (width 0.3) (layer F.Cu) (net 45) (status 30))
(segment (start 59.975 103) (end 59.975 101.2375) (width 0.3) (layer F.Cu) (net 45) (status 30))
(via (at 58 103.19) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 45))
(segment (start 58.19 103) (end 58 103.19) (width 0.3) (layer F.Cu) (net 45))
(segment (start 59.975 103) (end 58.19 103) (width 0.3) (layer F.Cu) (net 45) (status 10))
(via (at 57 105.99998) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 45))
(segment (start 55.81 106) (end 56.99998 106) (width 0.3) (layer F.Cu) (net 45))
(segment (start 53 101.675) (end 53 103.19) (width 0.3) (layer F.Cu) (net 45))
(segment (start 56.99998 106) (end 57 105.99998) (width 0.3) (layer F.Cu) (net 45))
(segment (start 53 103.19) (end 55.81 106) (width 0.3) (layer F.Cu) (net 45))
(segment (start 58 103.19) (end 58 105) (width 0.4) (layer B.Cu) (net 45))
(segment (start 57.99998 105) (end 57 105.99998) (width 0.4) (layer B.Cu) (net 45))
(segment (start 58 105) (end 57.99998 105) (width 0.4) (layer B.Cu) (net 45))
(segment (start 57.19 103.19) (end 58 103.19) (width 0.4) (layer B.Cu) (net 45))
(segment (start 56.3825 102.03) (end 56.3825 102.3825) (width 0.4) (layer B.Cu) (net 45))
(segment (start 56.3825 102.3825) (end 57.19 103.19) (width 0.4) (layer B.Cu) (net 45))
(via (at 52.75 103.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 45))
(segment (start 52.81 103.19) (end 52.75 103.25) (width 0.3) (layer F.Cu) (net 45))
(segment (start 53 103.19) (end 52.81 103.19) (width 0.3) (layer F.Cu) (net 45))
(segment (start 52.7125 103.25) (end 50.75 101.2875) (width 0.3) (layer B.Cu) (net 45))
(segment (start 52.75 103.25) (end 52.7125 103.25) (width 0.3) (layer B.Cu) (net 45))
(segment (start 91.6 82.9) (end 91.5 83) (width 1) (layer F.Cu) (net 46) (status 30))
(segment (start 91.6 77.5) (end 91.6 82.9) (width 1) (layer F.Cu) (net 46) (status 30))
(segment (start 91.5 83.6875) (end 91.5 83) (width 0.3) (layer B.Cu) (net 46) (status 30))
(segment (start 87.975 87.2125) (end 91.5 83.6875) (width 0.3) (layer B.Cu) (net 46) (status 20))
(segment (start 87.5 87.2125) (end 87.975 87.2125) (width 0.3) (layer B.Cu) (net 46) (status 10))
(segment (start 66.5 71.46) (end 66.5 70.975) (width 0.6) (layer F.Cu) (net 46) (status 30))
(segment (start 73 63.125) (end 77.725 63.125) (width 1) (layer F.Cu) (net 46) (status 30))
(segment (start 26.5 59) (end 23.5 59) (width 0.3) (layer B.Cu) (net 46) (status 20))
(segment (start 57.04 58.08) (end 48.78 58.08) (width 0.3) (layer B.Cu) (net 46))
(segment (start 46.629999 60.230001) (end 27.730001 60.230001) (width 0.3) (layer B.Cu) (net 46))
(segment (start 27.730001 60.230001) (end 26.5 59) (width 0.3) (layer B.Cu) (net 46))
(segment (start 48.78 58.08) (end 46.629999 60.230001) (width 0.3) (layer B.Cu) (net 46))
(segment (start 52.7775 81.2875) (end 52.85 81.215) (width 0.3) (layer F.Cu) (net 46) (status 30))
(segment (start 50 81.2875) (end 52.7775 81.2875) (width 0.3) (layer F.Cu) (net 46) (status 30))
(segment (start 57.04 58.08) (end 59.96 61) (width 0.3) (layer B.Cu) (net 46) (status 20))
(segment (start 59.96 61) (end 61.299999 62.339999) (width 0.3) (layer B.Cu) (net 46))
(segment (start 61.299999 64.950001) (end 61.25 65) (width 0.3) (layer B.Cu) (net 46))
(segment (start 61.299999 62.339999) (end 61.299999 64.950001) (width 0.3) (layer B.Cu) (net 46))
(segment (start 59.96 59.797919) (end 59.96 61) (width 0.6) (layer F.Cu) (net 46))
(segment (start 69.256386 63.125) (end 64.631386 58.5) (width 0.6) (layer F.Cu) (net 46))
(segment (start 73 63.125) (end 69.256386 63.125) (width 0.6) (layer F.Cu) (net 46))
(segment (start 64.631386 58.5) (end 61.25 58.5) (width 0.6) (layer F.Cu) (net 46))
(segment (start 61.25 58.5) (end 59.96 59.79) (width 0.6) (layer F.Cu) (net 46))
(segment (start 59.96 59.79) (end 59.96 59.797919) (width 0.6) (layer F.Cu) (net 46))
(via (at 57.31 77.77) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 46))
(segment (start 57.31 74.189974) (end 57.31 77.416447) (width 0.4) (layer B.Cu) (net 46))
(segment (start 57.31 77.416447) (end 57.31 77.77) (width 0.4) (layer B.Cu) (net 46))
(segment (start 61.25 70.249974) (end 57.31 74.189974) (width 0.4) (layer B.Cu) (net 46))
(segment (start 61.25 65) (end 61.25 70.249974) (width 0.4) (layer B.Cu) (net 46))
(segment (start 52.85 81.215) (end 54.005 81.215) (width 0.4) (layer F.Cu) (net 46))
(segment (start 57.31 77.91) (end 57.31 77.77) (width 0.4) (layer F.Cu) (net 46))
(segment (start 54.005 81.215) (end 57.31 77.91) (width 0.4) (layer F.Cu) (net 46))
(segment (start 22.75 30.9) (end 22.85 31) (width 1) (layer F.Cu) (net 46))
(segment (start 19.5 30.9) (end 22.75 30.9) (width 1) (layer F.Cu) (net 46))
(segment (start 22.9375 31.0875) (end 22.85 31) (width 2) (layer F.Cu) (net 46))
(segment (start 22.9375 42) (end 22.9375 38.0625) (width 2) (layer F.Cu) (net 46))
(segment (start 22.9375 37.0625) (end 22.9375 31.0875) (width 2) (layer F.Cu) (net 46) (tstamp 5EC201F2))
(via (at 22.9375 37.0625) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 46))
(via (at 22.9375 38.0625) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 46))
(segment (start 22.9375 37.0625) (end 22.9375 38.0625) (width 2) (layer B.Cu) (net 46))
(segment (start 79 61.85) (end 77.725 63.125) (width 1) (layer B.Cu) (net 46))
(via (at 77.725 63.125) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 46))
(segment (start 91.6 77.1) (end 91.6 77.5) (width 1) (layer F.Cu) (net 46))
(segment (start 79 55) (end 79 61.85) (width 1) (layer B.Cu) (net 46))
(segment (start 66 42) (end 79 55) (width 1) (layer B.Cu) (net 46))
(segment (start 22.9375 37.0625) (end 27.875 42) (width 1) (layer B.Cu) (net 46))
(segment (start 41.0425 48.5625) (end 40.95 48.47) (width 0.4) (layer F.Cu) (net 46))
(segment (start 43.5 48.5625) (end 41.0425 48.5625) (width 0.4) (layer F.Cu) (net 46))
(via (at 41 42) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 46))
(segment (start 41 42) (end 42 42) (width 1) (layer B.Cu) (net 46))
(segment (start 27.875 42) (end 40 42) (width 1) (layer B.Cu) (net 46))
(segment (start 42 42) (end 66 42) (width 1) (layer B.Cu) (net 46) (tstamp 5EC21FED))
(via (at 42 42) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 46))
(segment (start 40 42) (end 41 42) (width 1) (layer B.Cu) (net 46) (tstamp 5EC21FEF))
(via (at 40 42) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 46))
(segment (start 68.750001 63.631385) (end 69.256386 63.125) (width 0.6) (layer F.Cu) (net 46))
(segment (start 68.750001 69.209999) (end 68.750001 63.631385) (width 0.6) (layer F.Cu) (net 46))
(segment (start 66.5 71.46) (end 68.750001 69.209999) (width 0.6) (layer F.Cu) (net 46))
(segment (start 40.95 42.05) (end 41 42) (width 1) (layer F.Cu) (net 46))
(segment (start 40.95 48.47) (end 40.95 42.05) (width 1) (layer F.Cu) (net 46))
(segment (start 77.725 63.125) (end 77.725 73.225) (width 0.6) (layer B.Cu) (net 46))
(segment (start 87.5 83) (end 91.5 83) (width 0.6) (layer B.Cu) (net 46))
(segment (start 77.725 73.225) (end 87.5 83) (width 0.6) (layer B.Cu) (net 46))
(via (at 34.25 65.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 47))
(via (at 32 65.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 47))
(segment (start 34.25 65.5) (end 32 65.5) (width 0.3) (layer B.Cu) (net 47))
(segment (start 32 65.5) (end 32 66.7125) (width 0.3) (layer B.Cu) (net 47))
(segment (start 32 65.5) (end 31.25 65.5) (width 0.3) (layer F.Cu) (net 47))
(segment (start 29.25 67.5) (end 29 67.5) (width 0.3) (layer F.Cu) (net 47))
(segment (start 31.25 65.5) (end 29.25 67.5) (width 0.3) (layer F.Cu) (net 47))
(segment (start 44.25 65.5) (end 34.25 65.5) (width 0.3) (layer F.Cu) (net 47))
(segment (start 45.96 67.21) (end 44.25 65.5) (width 0.3) (layer F.Cu) (net 47))
(segment (start 46.5 86.325) (end 46.5 78.99) (width 0.3) (layer F.Cu) (net 47))
(segment (start 45.96 78.45) (end 45.96 67.21) (width 0.3) (layer F.Cu) (net 47))
(segment (start 46.5 78.99) (end 45.96 78.45) (width 0.3) (layer F.Cu) (net 47))
(segment (start 86 95.7125) (end 86.2875 96) (width 0.3) (layer B.Cu) (net 48) (status 30))
(segment (start 86 93.95) (end 86 95.7125) (width 0.3) (layer B.Cu) (net 48) (status 30))
(segment (start 86.2875 96) (end 86.2875 98) (width 0.3) (layer B.Cu) (net 48) (status 30))
(segment (start 72.775 96.9) (end 73.8 96.9) (width 0.3) (layer F.Cu) (net 49))
(segment (start 72.54999 96.67499) (end 72.775 96.9) (width 0.3) (layer F.Cu) (net 49))
(segment (start 69.10001 96.67499) (end 72.54999 96.67499) (width 0.3) (layer F.Cu) (net 49))
(segment (start 68.75 97.025) (end 69.10001 96.67499) (width 0.3) (layer F.Cu) (net 49))
(segment (start 68.75 97.4625) (end 68.75 97.025) (width 0.3) (layer F.Cu) (net 49))
(segment (start 67.175 99.0375) (end 68.75 97.4625) (width 0.3) (layer F.Cu) (net 49))
(segment (start 67 99.0375) (end 67.175 99.0375) (width 0.3) (layer F.Cu) (net 49))
(segment (start 67 100.7125) (end 67 99.0375) (width 0.3) (layer F.Cu) (net 49))
(segment (start 25.2375 54.5) (end 26.775 54.5) (width 0.3) (layer F.Cu) (net 50))
(segment (start 24.2125 55.525) (end 25.2375 54.5) (width 0.3) (layer F.Cu) (net 50) (status 10))
(segment (start 24.2125 56) (end 24.2125 55.525) (width 0.3) (layer F.Cu) (net 50) (status 30))
(segment (start 28.2125 54.5) (end 27 54.5) (width 0.3) (layer F.Cu) (net 50) (status 10))
(segment (start 26.775 54.5) (end 27 54.5) (width 0.3) (layer F.Cu) (net 50))
(segment (start 27 54.5) (end 27.2125 54.5) (width 0.3) (layer F.Cu) (net 50))
(segment (start 87.975 88.7875) (end 87.5 88.7875) (width 0.3) (layer B.Cu) (net 51) (status 20))
(segment (start 88 88.8125) (end 87.975 88.7875) (width 0.3) (layer B.Cu) (net 51))
(segment (start 88 93) (end 88 88.8125) (width 0.3) (layer B.Cu) (net 51) (status 10))
(segment (start 88 93) (end 91.5 93) (width 0.3) (layer B.Cu) (net 51) (status 30))
(segment (start 66 79.55) (end 66.05 79.5) (width 0.3) (layer F.Cu) (net 52) (status 30))
(segment (start 66 81.2125) (end 66 79.55) (width 0.3) (layer F.Cu) (net 52) (status 30))
(via (at 78.25 78.25) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 53))
(segment (start 80.65 78.25) (end 80.75 78.15) (width 0.4) (layer F.Cu) (net 53))
(segment (start 78.25 78.25) (end 80.65 78.25) (width 0.4) (layer F.Cu) (net 53))
(via (at 75.49999 96.25) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 53))
(segment (start 73.8 96.25) (end 75.49999 96.25) (width 0.4) (layer F.Cu) (net 53))
(segment (start 76.2125 96.96251) (end 75.49999 96.25) (width 0.4) (layer B.Cu) (net 53))
(segment (start 76.2125 97.5) (end 76.2125 96.96251) (width 0.4) (layer B.Cu) (net 53))
(segment (start 76.175 97.5375) (end 76.2125 97.5) (width 0.3) (layer B.Cu) (net 53))
(segment (start 76.175 99.25) (end 76.175 97.5375) (width 0.3) (layer B.Cu) (net 53))
(segment (start 79.9625 78.9375) (end 80.75 78.15) (width 0.3) (layer F.Cu) (net 53))
(segment (start 79.9625 79.75) (end 79.9625 78.9375) (width 0.3) (layer F.Cu) (net 53))
(segment (start 77.375 78.25) (end 77.25 78.375) (width 0.6) (layer F.Cu) (net 53))
(segment (start 78.25 78.25) (end 77.375 78.25) (width 0.6) (layer F.Cu) (net 53))
(segment (start 76.5 96.25) (end 75.49999 96.25) (width 0.4) (layer B.Cu) (net 53))
(segment (start 81 91.75) (end 76.5 96.25) (width 0.4) (layer B.Cu) (net 53))
(segment (start 81 81) (end 81 91.75) (width 0.4) (layer B.Cu) (net 53))
(segment (start 78.25 78.25) (end 81 81) (width 0.4) (layer B.Cu) (net 53))
(segment (start 46.0875 106.2875) (end 46.5 106.7) (width 0.3) (layer F.Cu) (net 57) (status 30))
(segment (start 44.5 106.2875) (end 46.0875 106.2875) (width 0.3) (layer F.Cu) (net 57) (status 30))
(via (at 48.14 106.72) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 57))
(segment (start 46.5 106.7) (end 48.12 106.7) (width 0.3) (layer F.Cu) (net 57) (status 10))
(segment (start 48.12 106.7) (end 48.14 106.72) (width 0.3) (layer F.Cu) (net 57))
(segment (start 47.7125 106.2925) (end 47.7125 105.5) (width 0.3) (layer B.Cu) (net 57) (status 20))
(segment (start 48.14 106.72) (end 47.7125 106.2925) (width 0.3) (layer B.Cu) (net 57))
(segment (start 48 106.58) (end 48.14 106.72) (width 0.3) (layer F.Cu) (net 57))
(segment (start 48 101.675) (end 48 106.58) (width 0.3) (layer F.Cu) (net 57) (status 10))
(segment (start 50.9125 104.7125) (end 50.5 104.3) (width 0.3) (layer F.Cu) (net 58) (status 30))
(segment (start 52.5 104.7125) (end 50.9125 104.7125) (width 0.3) (layer F.Cu) (net 58) (status 30))
(segment (start 49.05 104.26) (end 49.09 104.3) (width 0.3) (layer F.Cu) (net 58))
(segment (start 49.2875 104.4975) (end 49.2875 105.5) (width 0.3) (layer B.Cu) (net 58) (status 20))
(segment (start 49.09 104.3) (end 50.5 104.3) (width 0.3) (layer F.Cu) (net 58) (status 20))
(via (at 49.05 104.26) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 58))
(segment (start 49.05 104.26) (end 49.2875 104.4975) (width 0.3) (layer B.Cu) (net 58))
(segment (start 48.5 103.71) (end 49.05 104.26) (width 0.3) (layer F.Cu) (net 58))
(segment (start 48.5 101.675) (end 48.5 103.71) (width 0.3) (layer F.Cu) (net 58) (status 10))
(segment (start 58.2125 88.5) (end 56.175 88.5) (width 0.3) (layer F.Cu) (net 59) (status 30))
(segment (start 43.5 86.325) (end 43.5 83.5) (width 0.3) (layer F.Cu) (net 60) (status 30))
(segment (start 72.275 95.6) (end 73.8 95.6) (width 0.3) (layer F.Cu) (net 61))
(segment (start 70.25 95.2875) (end 71.9625 95.2875) (width 0.3) (layer F.Cu) (net 61))
(segment (start 71.9625 95.2875) (end 72.275 95.6) (width 0.3) (layer F.Cu) (net 61))
(segment (start 70.2125 95.25) (end 70.25 95.2875) (width 0.3) (layer F.Cu) (net 61))
(segment (start 68.75 95.25) (end 70.2125 95.25) (width 0.3) (layer F.Cu) (net 61))
(segment (start 72.775 97.55) (end 73.8 97.55) (width 0.3) (layer F.Cu) (net 65))
(segment (start 70.8125 97.55) (end 72.775 97.55) (width 0.3) (layer F.Cu) (net 65))
(segment (start 70.725 97.4625) (end 70.8125 97.55) (width 0.3) (layer F.Cu) (net 65))
(segment (start 70.25 97.4625) (end 70.725 97.4625) (width 0.3) (layer F.Cu) (net 65))
(segment (start 77.2875 102.5) (end 77.2875 100.75) (width 0.3) (layer F.Cu) (net 65))
(segment (start 74.825 97.55) (end 73.8 97.55) (width 0.3) (layer F.Cu) (net 65))
(segment (start 77.2875 100.0125) (end 74.825 97.55) (width 0.3) (layer F.Cu) (net 65))
(segment (start 77.2875 100.75) (end 77.2875 100.0125) (width 0.3) (layer F.Cu) (net 65))
(segment (start 75.5 100.9625) (end 75.7125 100.75) (width 0.3) (layer F.Cu) (net 66))
(segment (start 73.75 100.9625) (end 75.5 100.9625) (width 0.3) (layer F.Cu) (net 66))
(segment (start 72.175 102.5375) (end 73.75 100.9625) (width 0.3) (layer F.Cu) (net 66))
(segment (start 71.5 102.5375) (end 72.175 102.5375) (width 0.3) (layer F.Cu) (net 66))
(via (at 53.89 83.8) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 67))
(segment (start 59.825 79.945) (end 57.77 82) (width 0.3) (layer F.Cu) (net 67))
(segment (start 55.69 82) (end 54.139999 83.550001) (width 0.3) (layer F.Cu) (net 67))
(segment (start 54.139999 83.550001) (end 53.89 83.8) (width 0.3) (layer F.Cu) (net 67))
(segment (start 57.77 82) (end 55.69 82) (width 0.3) (layer F.Cu) (net 67))
(segment (start 62.15 79.945) (end 59.825 79.945) (width 0.3) (layer F.Cu) (net 67))
(via (at 51.160002 88.78) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 67))
(segment (start 45.596447 93.5) (end 50.316447 88.78) (width 0.3) (layer F.Cu) (net 67))
(segment (start 50.806449 88.78) (end 51.160002 88.78) (width 0.3) (layer F.Cu) (net 67))
(segment (start 50.316447 88.78) (end 50.806449 88.78) (width 0.3) (layer F.Cu) (net 67))
(segment (start 40.825 93.5) (end 45.596447 93.5) (width 0.3) (layer F.Cu) (net 67))
(segment (start 51.160002 85.099998) (end 51.160002 88.78) (width 0.3) (layer B.Cu) (net 67))
(segment (start 53.89 83.8) (end 52.46 83.8) (width 0.3) (layer B.Cu) (net 67))
(segment (start 52.46 83.8) (end 51.160002 85.099998) (width 0.3) (layer B.Cu) (net 67))
(via (at 64.25 77.500016) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 68))
(segment (start 64.154984 77.405) (end 64.25 77.500016) (width 0.3) (layer F.Cu) (net 68))
(segment (start 62.15 77.405) (end 64.154984 77.405) (width 0.3) (layer F.Cu) (net 68) (status 10))
(segment (start 52.59 90.11) (end 50.713553 90.11) (width 0.3) (layer B.Cu) (net 68))
(segment (start 64.25 77.500016) (end 64.25 78.45) (width 0.3) (layer B.Cu) (net 68))
(segment (start 50.713553 90.11) (end 50.36 90.11) (width 0.3) (layer B.Cu) (net 68))
(via (at 50.36 90.11) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 68))
(segment (start 64.25 78.45) (end 52.59 90.11) (width 0.3) (layer B.Cu) (net 68))
(segment (start 50.35 90.1) (end 50.36 90.11) (width 0.3) (layer F.Cu) (net 68))
(segment (start 49.91 90.1) (end 50.35 90.1) (width 0.3) (layer F.Cu) (net 68))
(segment (start 40.825 94) (end 46.01 94) (width 0.3) (layer F.Cu) (net 68))
(segment (start 46.01 94) (end 49.91 90.1) (width 0.3) (layer F.Cu) (net 68))
(segment (start 62.15 74.865) (end 64.005 74.865) (width 0.3) (layer F.Cu) (net 69) (status 10))
(via (at 64.05 74.82) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 69))
(segment (start 64.005 74.865) (end 64.05 74.82) (width 0.3) (layer F.Cu) (net 69))
(via (at 57.37 81.2) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 69))
(segment (start 64.01 74.78) (end 64.05 74.82) (width 0.3) (layer B.Cu) (net 69))
(segment (start 61.94 74.78) (end 64.01 74.78) (width 0.3) (layer B.Cu) (net 69))
(segment (start 57.37 81.2) (end 60.36 78.21) (width 0.3) (layer B.Cu) (net 69))
(segment (start 60.36 76.36) (end 61.94 74.78) (width 0.3) (layer B.Cu) (net 69))
(segment (start 60.36 78.21) (end 60.36 76.36) (width 0.3) (layer B.Cu) (net 69))
(segment (start 52.5 84.34) (end 52.5 86.325) (width 0.3) (layer F.Cu) (net 69))
(segment (start 57.37 81.2) (end 55.64 81.2) (width 0.3) (layer F.Cu) (net 69))
(segment (start 55.64 81.2) (end 52.5 84.34) (width 0.3) (layer F.Cu) (net 69))
(via (at 60.34 72.4) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 71))
(segment (start 60.415 72.325) (end 62.15 72.325) (width 0.3) (layer F.Cu) (net 71) (status 20))
(segment (start 60.34 72.4) (end 60.415 72.325) (width 0.3) (layer F.Cu) (net 71))
(via (at 57.46 79.92) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 71))
(segment (start 58.86 78.52) (end 57.709999 79.670001) (width 0.3) (layer B.Cu) (net 71))
(segment (start 60.34 72.4) (end 58.86 73.88) (width 0.3) (layer B.Cu) (net 71))
(segment (start 58.86 73.88) (end 58.86 78.52) (width 0.3) (layer B.Cu) (net 71))
(segment (start 57.709999 79.670001) (end 57.46 79.92) (width 0.3) (layer B.Cu) (net 71))
(segment (start 56.466447 80.56) (end 57.106447 79.92) (width 0.3) (layer F.Cu) (net 71))
(segment (start 52 86.325) (end 52 84.07) (width 0.3) (layer F.Cu) (net 71))
(segment (start 57.106447 79.92) (end 57.46 79.92) (width 0.3) (layer F.Cu) (net 71))
(segment (start 55.51 80.56) (end 56.466447 80.56) (width 0.3) (layer F.Cu) (net 71))
(segment (start 52 84.07) (end 55.51 80.56) (width 0.3) (layer F.Cu) (net 71))
(segment (start 48.25 75.83) (end 49.215 74.865) (width 0.3) (layer F.Cu) (net 73))
(segment (start 49.215 74.865) (end 52.85 74.865) (width 0.3) (layer F.Cu) (net 73) (status 20))
(segment (start 48.25 82.15) (end 48.25 75.83) (width 0.3) (layer F.Cu) (net 73))
(segment (start 51 86.325) (end 51 84.9) (width 0.3) (layer F.Cu) (net 73) (status 10))
(segment (start 51 84.9) (end 48.25 82.15) (width 0.3) (layer F.Cu) (net 73))
(segment (start 52.85 77.405) (end 49.595 77.405) (width 0.3) (layer F.Cu) (net 74) (status 10))
(segment (start 49.595 77.405) (end 48.77 78.23) (width 0.3) (layer F.Cu) (net 74))
(segment (start 48.77 78.23) (end 48.77 81.75) (width 0.3) (layer F.Cu) (net 74))
(segment (start 51.5 84.48) (end 51.5 86.325) (width 0.3) (layer F.Cu) (net 74) (status 20))
(segment (start 48.77 81.75) (end 51.5 84.48) (width 0.3) (layer F.Cu) (net 74))
(via (at 52.94 95.44) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 117))
(segment (start 53 97.7125) (end 53 95.5) (width 0.3) (layer B.Cu) (net 117) (status 10))
(segment (start 53 95.5) (end 52.94 95.44) (width 0.3) (layer B.Cu) (net 117))
(segment (start 80.95 81.25) (end 79.05 81.25) (width 0.4) (layer F.Cu) (net 117))
(via (at 75.25 81.5) (size 0.9) (drill 0.5) (layers F.Cu B.Cu) (net 117))
(segment (start 75.5 81.25) (end 75.25 81.5) (width 0.4) (layer F.Cu) (net 117))
(segment (start 79.05 81.25) (end 77.25 81.25) (width 0.4) (layer F.Cu) (net 117))
(segment (start 77.25 81.25) (end 75.5 81.25) (width 0.4) (layer F.Cu) (net 117))
(segment (start 74.613604 81.5) (end 75.25 81.5) (width 0.3) (layer F.Cu) (net 117))
(segment (start 68.75 93.2375) (end 67.5 91.9875) (width 0.3) (layer F.Cu) (net 117))
(segment (start 68.75 93.675) (end 68.75 93.2375) (width 0.3) (layer F.Cu) (net 117))
(segment (start 69.75 81.5) (end 74.613604 81.5) (width 0.3) (layer F.Cu) (net 117))
(segment (start 67.5 83.75) (end 69.75 81.5) (width 0.3) (layer F.Cu) (net 117))
(segment (start 65.75 87.25) (end 66.81066 87.25) (width 0.25) (layer F.Cu) (net 117))
(segment (start 66.81066 87.25) (end 67.5 87.25) (width 0.25) (layer F.Cu) (net 117))
(segment (start 67.5 91.9875) (end 67.5 87.25) (width 0.3) (layer F.Cu) (net 117))
(segment (start 67.5 87.25) (end 67.5 83.75) (width 0.3) (layer F.Cu) (net 117))
(via (at 53.82 91.69) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 117))
(segment (start 53.82 94.56) (end 53.82 91.69) (width 0.3) (layer F.Cu) (net 117))
(segment (start 52.94 95.44) (end 53.82 94.56) (width 0.3) (layer F.Cu) (net 117))
(segment (start 81.25 80.25) (end 81.25 80.95) (width 0.3) (layer F.Cu) (net 117))
(segment (start 81.5375 79.9625) (end 81.25 80.25) (width 0.3) (layer F.Cu) (net 117))
(segment (start 81.25 80.95) (end 80.95 81.25) (width 0.3) (layer F.Cu) (net 117))
(segment (start 81.5375 79.75) (end 81.5375 79.9625) (width 0.3) (layer F.Cu) (net 117))
(segment (start 66.1125 93.7125) (end 65.9 93.5) (width 0.3) (layer F.Cu) (net 117))
(segment (start 68.75 93.7125) (end 66.1125 93.7125) (width 0.3) (layer F.Cu) (net 117))
(segment (start 53.82 91.508224) (end 53.82 91.69) (width 0.4) (layer B.Cu) (net 117))
(segment (start 63.828224 81.5) (end 53.82 91.508224) (width 0.4) (layer B.Cu) (net 117))
(segment (start 75.25 81.5) (end 63.828224 81.5) (width 0.4) (layer B.Cu) (net 117))
(segment (start 35.985 95) (end 34 96.985) (width 0.3) (layer F.Cu) (net 118))
(segment (start 40.825 95) (end 35.985 95) (width 0.3) (layer F.Cu) (net 118) (status 10))
(segment (start 34 96.985) (end 34 101.25) (width 0.3) (layer F.Cu) (net 118))
(segment (start 32.8 102.45) (end 32.8 103.65) (width 0.3) (layer F.Cu) (net 118))
(segment (start 34 101.25) (end 32.8 102.45) (width 0.3) (layer F.Cu) (net 118))
(segment (start 34.7 97.55) (end 34.7 103.65) (width 0.3) (layer F.Cu) (net 119))
(segment (start 40.825 95.5) (end 36.75 95.5) (width 0.3) (layer F.Cu) (net 119))
(segment (start 36.75 95.5) (end 34.7 97.55) (width 0.3) (layer F.Cu) (net 119))
(segment (start 36 103.1) (end 36.55 103.65) (width 0.3) (layer F.Cu) (net 120))
(segment (start 36 97.25) (end 36 103.1) (width 0.3) (layer F.Cu) (net 120))
(segment (start 40.825 96) (end 37.25 96) (width 0.3) (layer F.Cu) (net 120))
(segment (start 37.25 96) (end 36 97.25) (width 0.3) (layer F.Cu) (net 120))
(segment (start 38.25 103.45) (end 38.45 103.65) (width 0.3) (layer F.Cu) (net 121))
(segment (start 37.75 96.5) (end 37.25 97) (width 0.3) (layer F.Cu) (net 121))
(segment (start 37.25 101) (end 38.25 102) (width 0.3) (layer F.Cu) (net 121))
(segment (start 40.825 96.5) (end 37.75 96.5) (width 0.3) (layer F.Cu) (net 121))
(segment (start 37.25 97) (end 37.25 101) (width 0.3) (layer F.Cu) (net 121))
(segment (start 38.25 102) (end 38.25 103.45) (width 0.3) (layer F.Cu) (net 121))
(segment (start 82.9875 97.55) (end 83 97.5375) (width 0.3) (layer F.Cu) (net 122))
(segment (start 81.2875 97.5625) (end 81.2875 100.75) (width 0.3) (layer F.Cu) (net 122))
(segment (start 79.7 97.55) (end 81.3 97.55) (width 0.3) (layer F.Cu) (net 122))
(segment (start 81.3 97.55) (end 81.2875 97.5625) (width 0.3) (layer F.Cu) (net 122))
(segment (start 81.3 97.55) (end 82.9875 97.55) (width 0.3) (layer F.Cu) (net 122))
(segment (start 81.2875 102.25) (end 81.2875 100.75) (width 0.3) (layer F.Cu) (net 122))
(segment (start 79.7125 98.2125) (end 79.7 98.2) (width 0.3) (layer F.Cu) (net 123))
(segment (start 79.7125 100.75) (end 79.7125 98.2125) (width 0.3) (layer F.Cu) (net 123))
(segment (start 79.7125 102.25) (end 79.7125 100.75) (width 0.3) (layer F.Cu) (net 123))
(segment (start 79.7125 102.975) (end 79.7125 102.5) (width 0.3) (layer F.Cu) (net 123))
(segment (start 79.1875 103.5) (end 79.7125 102.975) (width 0.3) (layer F.Cu) (net 123))
(segment (start 75.7125 102.5) (end 75.7125 102.975) (width 0.3) (layer F.Cu) (net 123))
(segment (start 76.2375 103.5) (end 79.1875 103.5) (width 0.3) (layer F.Cu) (net 123))
(segment (start 75.7125 102.975) (end 76.2375 103.5) (width 0.3) (layer F.Cu) (net 123))
(segment (start 82.4625 92.5) (end 82.5 92.5375) (width 0.3) (layer F.Cu) (net 124))
(segment (start 81.0375 92.5) (end 82.4625 92.5) (width 0.3) (layer F.Cu) (net 124))
(segment (start 81.0375 92.5) (end 81.0375 91) (width 0.3) (layer F.Cu) (net 124))
(segment (start 82.5 92.975) (end 82.5 92.5375) (width 0.3) (layer F.Cu) (net 124))
(segment (start 82.5 93.175) (end 82.5 92.975) (width 0.3) (layer F.Cu) (net 124))
(segment (start 80.725 94.95) (end 82.5 93.175) (width 0.3) (layer F.Cu) (net 124))
(segment (start 79.7 94.95) (end 80.725 94.95) (width 0.3) (layer F.Cu) (net 124))
(segment (start 79.4625 94.0625) (end 79.7 94.3) (width 0.3) (layer F.Cu) (net 125))
(segment (start 79.4625 92.5) (end 79.4625 94.0625) (width 0.3) (layer F.Cu) (net 125))
(segment (start 79.4625 92.5) (end 79.4625 91) (width 0.3) (layer F.Cu) (net 125))
(via (at 77.5 92.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 125))
(segment (start 79.4625 92.5) (end 77.5 92.5) (width 0.3) (layer F.Cu) (net 125))
(via (at 67 96.5) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 125))
(segment (start 67 97.4625) (end 67 96.5) (width 0.3) (layer F.Cu) (net 125))
(segment (start 67 96.5) (end 73 96.5) (width 0.3) (layer B.Cu) (net 125))
(segment (start 77 92.5) (end 77.5 92.5) (width 0.3) (layer B.Cu) (net 125))
(segment (start 73 96.5) (end 77 92.5) (width 0.3) (layer B.Cu) (net 125))
(segment (start 68.75 99.0375) (end 70.25 99.0375) (width 0.3) (layer F.Cu) (net 126))
(segment (start 75.9625 105.5) (end 75.9625 106.4625) (width 0.3) (layer F.Cu) (net 127) (tstamp 5E3D3EEA))
(segment (start 75.9625 106.4625) (end 75.9625 107.5) (width 0.3) (layer F.Cu) (net 127) (tstamp 5E3D3EED))
(segment (start 74.0375 105.5) (end 73.75 105.7875) (width 0.3) (layer F.Cu) (net 127))
(segment (start 75.9625 105.5) (end 74.0375 105.5) (width 0.3) (layer F.Cu) (net 127))
(segment (start 74.3 98.2) (end 73.8 98.2) (width 0.3) (layer F.Cu) (net 128))
(segment (start 72.775 98.2) (end 73.8 98.2) (width 0.3) (layer F.Cu) (net 128))
(segment (start 71.5 99.475) (end 72.775 98.2) (width 0.3) (layer F.Cu) (net 128))
(segment (start 71.5 100.9625) (end 71.5 99.475) (width 0.3) (layer F.Cu) (net 128))
(via (at 55.46 85.25) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 129))
(segment (start 53.12 82.12) (end 55.46 84.46) (width 0.3) (layer B.Cu) (net 129))
(segment (start 51.005 82.12) (end 53.12 82.12) (width 0.3) (layer B.Cu) (net 129))
(segment (start 55.46 84.896447) (end 55.46 85.25) (width 0.3) (layer B.Cu) (net 129))
(segment (start 54.5 86.325) (end 55.46 85.365) (width 0.3) (layer F.Cu) (net 129))
(segment (start 55.46 84.46) (end 55.46 84.896447) (width 0.3) (layer B.Cu) (net 129))
(segment (start 55.46 85.365) (end 55.46 85.25) (width 0.3) (layer F.Cu) (net 129))
(segment (start 54 85.41821) (end 55.633377 83.784833) (width 0.3) (layer F.Cu) (net 130))
(segment (start 54 86.325) (end 54 85.41821) (width 0.3) (layer F.Cu) (net 130))
(via (at 55.633377 83.784833) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 130))
(segment (start 54.01 75.29) (end 54.01 82.161456) (width 0.3) (layer B.Cu) (net 130))
(segment (start 54.58 74.72) (end 54.01 75.29) (width 0.3) (layer B.Cu) (net 130))
(segment (start 54.01 82.161456) (end 55.383378 83.534834) (width 0.3) (layer B.Cu) (net 130))
(segment (start 54.58 71.94) (end 54.58 74.72) (width 0.3) (layer B.Cu) (net 130))
(segment (start 55.383378 83.534834) (end 55.633377 83.784833) (width 0.3) (layer B.Cu) (net 130))
(segment (start 48.465 74.72) (end 48.465 72.585) (width 0.3) (layer B.Cu) (net 130))
(segment (start 49.89 71.16) (end 53.8 71.16) (width 0.3) (layer B.Cu) (net 130))
(segment (start 48.465 72.585) (end 49.89 71.16) (width 0.3) (layer B.Cu) (net 130))
(segment (start 53.8 71.16) (end 54.58 71.94) (width 0.3) (layer B.Cu) (net 130))
(via (at 53.21 88.62) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 131))
(segment (start 53.5 88.33) (end 53.459999 88.370001) (width 0.3) (layer F.Cu) (net 131))
(segment (start 53.459999 88.370001) (end 53.21 88.62) (width 0.3) (layer F.Cu) (net 131))
(segment (start 53.5 86.325) (end 53.5 88.33) (width 0.3) (layer F.Cu) (net 131))
(segment (start 49.735 83.295) (end 50.16 83.72) (width 0.3) (layer B.Cu) (net 131))
(segment (start 52.960001 88.869999) (end 53.21 88.62) (width 0.3) (layer B.Cu) (net 131))
(segment (start 50.16 83.72) (end 50.16 88.901998) (width 0.3) (layer B.Cu) (net 131))
(segment (start 50.668002 89.41) (end 52.42 89.41) (width 0.3) (layer B.Cu) (net 131))
(segment (start 50.16 88.901998) (end 50.668002 89.41) (width 0.3) (layer B.Cu) (net 131))
(segment (start 52.42 89.41) (end 52.960001 88.869999) (width 0.3) (layer B.Cu) (net 131))
(segment (start 49.735 82.12) (end 49.735 83.295) (width 0.3) (layer B.Cu) (net 131))
(via (at 47.89 88.34) (size 0.5) (drill 0.3) (layers F.Cu B.Cu) (net 132))
(segment (start 48.64 87.59) (end 47.89 88.34) (width 0.3) (layer F.Cu) (net 132))
(segment (start 52.673553 87.59) (end 48.64 87.59) (width 0.3) (layer F.Cu) (net 132))
(segment (start 53 86.325) (end 53 87.263553) (width 0.3) (layer F.Cu) (net 132))
(segment (start 53 87.263553) (end 52.673553 87.59) (width 0.3) (layer F.Cu) (net 132))
(segment (start 46.62 74.72) (end 47.195 74.72) (width 0.3) (layer B.Cu) (net 132))
(segment (start 46.37 74.97) (end 46.62 74.72) (width 0.3) (layer B.Cu) (net 132))
(segment (start 46.37 84.12) (end 46.37 74.97) (width 0.3) (layer B.Cu) (net 132))
(segment (start 47.89 85.64) (end 46.37 84.12) (width 0.3) (layer B.Cu) (net 132))
(segment (start 47.89 88.34) (end 47.89 85.64) (width 0.3) (layer B.Cu) (net 132))
(segment (start 31.15 31) (end 34.5 31) (width 1) (layer F.Cu) (net 133))
(segment (start 34.5 31) (end 34.5 29.4) (width 1) (layer F.Cu) (net 133))
(segment (start 34.5 32.1) (end 34.5 31) (width 1) (layer F.Cu) (net 133))
(segment (start 34.5 31) (end 42.25 31) (width 1) (layer F.Cu) (net 133))
(segment (start 72.8125 79.4625) (end 72.75 79.4) (width 0.4) (layer F.Cu) (net 134))
(segment (start 73.475 80.125) (end 72.75 79.4) (width 0.6) (layer F.Cu) (net 134))
(segment (start 77.25 80.125) (end 73.475 80.125) (width 0.6) (layer F.Cu) (net 134))
(segment (start 72.75 79.4) (end 72.75 75.75) (width 0.6) (layer F.Cu) (net 134))
(segment (start 72.75 75.75) (end 72.75 73.1) (width 0.6) (layer F.Cu) (net 134))
(segment (start 76.262508 75.800008) (end 77.25 76.7875) (width 0.6) (layer F.Cu) (net 134))
(segment (start 72.800008 75.800008) (end 76.262508 75.800008) (width 0.6) (layer F.Cu) (net 134))
(segment (start 72.75 75.75) (end 72.800008 75.800008) (width 0.6) (layer F.Cu) (net 134))
Add solder jumpers for connection between Earth and GND
2020-01-03 20:39:53 +01:00
Export gerbers with tented vias
2020-02-18 20:40:21 +01:00
(zone (net 2) (net_name GND) (layer F.Cu) (tstamp 5E4D0C54) (hatch edge 0.508)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(connect_pads (clearance 0.25))
(min_thickness 0.254)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(polygon
(pts
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 73 43.5) (xy 82 52.5) (xy 82 73.5) (xy 97.5 73.5) (xy 98 110.5)
(xy 67 110.5) (xy 64.5 110.5) (xy 18 110.5) (xy 18 43.5) (xy 64 43.5)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
)
)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(filled_polygon
(pts
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 40.073 47.491176) (xy 39.85 47.491176) (xy 39.776095 47.498455) (xy 39.70503 47.520012) (xy 39.639537 47.555019)
(xy 39.582131 47.602131) (xy 39.535019 47.659537) (xy 39.500012 47.72503) (xy 39.478455 47.796095) (xy 39.471176 47.87)
(xy 39.471176 49.07) (xy 39.478455 49.143905) (xy 39.500012 49.21497) (xy 39.535019 49.280463) (xy 39.582131 49.337869)
(xy 39.639537 49.384981) (xy 39.70503 49.419988) (xy 39.776095 49.441545) (xy 39.85 49.448824) (xy 42.05 49.448824)
(xy 42.123905 49.441545) (xy 42.19497 49.419988) (xy 42.260463 49.384981) (xy 42.317869 49.337869) (xy 42.364981 49.280463)
(xy 42.399988 49.21497) (xy 42.421545 49.143905) (xy 42.421979 49.1395) (xy 42.519346 49.1395) (xy 42.526099 49.152134)
(xy 42.603524 49.246476) (xy 42.695784 49.322192) (xy 42.675518 49.324188) (xy 42.55582 49.360498) (xy 42.445506 49.419463)
(xy 42.348815 49.498815) (xy 42.269463 49.595506) (xy 42.210498 49.70582) (xy 42.174188 49.825518) (xy 42.161928 49.95)
(xy 42.165 50.15175) (xy 42.32375 50.3105) (xy 43.373 50.3105) (xy 43.373 50.2905) (xy 43.627 50.2905)
(xy 43.627 50.3105) (xy 44.67625 50.3105) (xy 44.835 50.15175) (xy 44.838072 49.95) (xy 44.825812 49.825518)
(xy 44.789502 49.70582) (xy 44.730537 49.595506) (xy 44.651185 49.498815) (xy 44.554494 49.419463) (xy 44.44418 49.360498)
(xy 44.324482 49.324188) (xy 44.304216 49.322192) (xy 44.396476 49.246476) (xy 44.473901 49.152134) (xy 44.531433 49.044499)
(xy 44.566861 48.927708) (xy 44.578824 48.80625) (xy 44.578824 48.31875) (xy 44.566861 48.197292) (xy 44.531433 48.080501)
(xy 44.473901 47.972866) (xy 44.396476 47.878524) (xy 44.302134 47.801099) (xy 44.194499 47.743567) (xy 44.077708 47.708139)
(xy 43.95625 47.696176) (xy 43.04375 47.696176) (xy 42.922292 47.708139) (xy 42.805501 47.743567) (xy 42.697866 47.801099)
(xy 42.603524 47.878524) (xy 42.526099 47.972866) (xy 42.519346 47.9855) (xy 42.428824 47.9855) (xy 42.428824 47.87)
(xy 42.421545 47.796095) (xy 42.399988 47.72503) (xy 42.364981 47.659537) (xy 42.317869 47.602131) (xy 42.260463 47.555019)
(xy 42.19497 47.520012) (xy 42.123905 47.498455) (xy 42.05 47.491176) (xy 41.827 47.491176) (xy 41.827 43.627)
(xy 72.947394 43.627) (xy 81.873 52.552606) (xy 81.873 73.5) (xy 81.87544 73.524776) (xy 81.882667 73.548601)
(xy 81.894403 73.570557) (xy 81.910197 73.589803) (xy 81.929443 73.605597) (xy 81.951399 73.617333) (xy 81.975224 73.62456)
(xy 82 73.627) (xy 82.618436 73.627) (xy 82.626803 73.654583) (xy 82.664132 73.72442) (xy 82.701901 73.770441)
(xy 82.714368 73.785632) (xy 82.77558 73.835868) (xy 82.845417 73.873197) (xy 82.921194 73.896183) (xy 83 73.903945)
(xy 83.019747 73.902) (xy 96.480253 73.902) (xy 96.5 73.903945) (xy 96.519747 73.902) (xy 96.566948 73.897351)
(xy 96.578806 73.896183) (xy 96.654583 73.873197) (xy 96.72442 73.835868) (xy 96.785632 73.785632) (xy 96.835868 73.72442)
(xy 96.873197 73.654583) (xy 96.881564 73.627) (xy 97.374705 73.627) (xy 97.563797 87.619828) (xy 97.481027 87.518973)
(xy 97.377941 87.434372) (xy 97.26033 87.371508) (xy 97.132715 87.332796) (xy 97.099188 87.329494) (xy 97 87.319725)
(xy 96.966748 87.323) (xy 93.67816 87.323) (xy 93.632118 87.236861) (xy 93.461292 87.028708) (xy 93.253139 86.857882)
(xy 93.015659 86.730946) (xy 92.757979 86.65278) (xy 92.557152 86.633) (xy 90.442848 86.633) (xy 90.242021 86.65278)
(xy 89.984341 86.730946) (xy 89.746861 86.857882) (xy 89.538708 87.028708) (xy 89.367882 87.236861) (xy 89.240946 87.474341)
(xy 89.16278 87.732021) (xy 89.136386 88) (xy 89.16278 88.267979) (xy 89.240946 88.525659) (xy 89.367882 88.763139)
(xy 89.538708 88.971292) (xy 89.746861 89.142118) (xy 89.984341 89.269054) (xy 90.242021 89.34722) (xy 90.442848 89.367)
(xy 92.557152 89.367) (xy 92.757979 89.34722) (xy 93.015659 89.269054) (xy 93.253139 89.142118) (xy 93.461292 88.971292)
(xy 93.632118 88.763139) (xy 93.67816 88.677) (xy 96.323001 88.677) (xy 96.323 90.953251) (xy 96.323001 90.953261)
(xy 96.323 96.719577) (xy 93.504941 99.537637) (xy 93.194345 99.330103) (xy 92.543373 99.060462) (xy 91.852304 98.923)
(xy 91.147696 98.923) (xy 90.456627 99.060462) (xy 89.805655 99.330103) (xy 89.219795 99.721562) (xy 88.721562 100.219795)
(xy 88.330103 100.805655) (xy 88.060462 101.456627) (xy 87.987586 101.823) (xy 87.898702 101.823) (xy 87.891741 101.752323)
(xy 87.855958 101.634359) (xy 87.797848 101.525644) (xy 87.719646 101.430354) (xy 87.624356 101.352152) (xy 87.515641 101.294042)
(xy 87.397677 101.258259) (xy 87.275 101.246176) (xy 86.525 101.246176) (xy 86.402323 101.258259) (xy 86.284359 101.294042)
(xy 86.175644 101.352152) (xy 86.080354 101.430354) (xy 86.002152 101.525644) (xy 85.944042 101.634359) (xy 85.908259 101.752323)
(xy 85.896176 101.875) (xy 85.896176 103.125) (xy 85.908259 103.247677) (xy 85.944042 103.365641) (xy 86.002152 103.474356)
(xy 86.080354 103.569646) (xy 86.175644 103.647848) (xy 86.284359 103.705958) (xy 86.402323 103.741741) (xy 86.525 103.753824)
(xy 87.275 103.753824) (xy 87.397677 103.741741) (xy 87.515641 103.705958) (xy 87.624356 103.647848) (xy 87.719646 103.569646)
(xy 87.797848 103.474356) (xy 87.855958 103.365641) (xy 87.891741 103.247677) (xy 87.898702 103.177) (xy 87.987586 103.177)
(xy 88.060462 103.543373) (xy 88.330103 104.194345) (xy 88.537637 104.504941) (xy 88.219578 104.823) (xy 88.103824 104.823)
(xy 88.103824 104.75) (xy 88.096545 104.676095) (xy 88.074988 104.60503) (xy 88.039981 104.539537) (xy 87.992869 104.482131)
(xy 87.935463 104.435019) (xy 87.86997 104.400012) (xy 87.798905 104.378455) (xy 87.725 104.371176) (xy 86.725 104.371176)
(xy 86.650707 104.378533) (xy 86.579664 104.400164) (xy 86.514207 104.43524) (xy 86.456851 104.482411) (xy 86.409799 104.539866)
(xy 85.909799 105.289866) (xy 85.875164 105.354664) (xy 85.853533 105.425707) (xy 85.846176 105.499604) (xy 85.853378 105.573516)
(xy 85.874861 105.644603) (xy 85.909799 105.710134) (xy 86.409799 106.460134) (xy 86.457131 106.517869) (xy 86.514537 106.564981)
(xy 86.58003 106.599988) (xy 86.651095 106.621545) (xy 86.725 106.628824) (xy 87.725 106.628824) (xy 87.798905 106.621545)
(xy 87.86997 106.599988) (xy 87.935463 106.564981) (xy 87.992869 106.517869) (xy 88.039981 106.460463) (xy 88.074988 106.39497)
(xy 88.096545 106.323905) (xy 88.103824 106.25) (xy 88.103824 106.177) (xy 88.466755 106.177) (xy 88.5 106.180274)
(xy 88.533245 106.177) (xy 88.533252 106.177) (xy 88.632715 106.167204) (xy 88.76033 106.128492) (xy 88.877941 106.065628)
(xy 88.981027 105.981027) (xy 89.002226 105.955196) (xy 89.495059 105.462363) (xy 89.805655 105.669897) (xy 90.123 105.801346)
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(xy 90.123001 110.373) (xy 39.628824 110.373) (xy 39.628824 109.975) (xy 39.621467 109.900707) (xy 39.599836 109.829664)
(xy 39.56476 109.764207) (xy 39.517589 109.706851) (xy 39.460134 109.659799) (xy 38.710134 109.159799) (xy 38.645336 109.125164)
(xy 38.574293 109.103533) (xy 38.500396 109.096176) (xy 38.426484 109.103378) (xy 38.355397 109.124861) (xy 38.289866 109.159799)
(xy 37.539866 109.659799) (xy 37.482131 109.707131) (xy 37.435019 109.764537) (xy 37.400012 109.83003) (xy 37.378455 109.901095)
(xy 37.371176 109.975) (xy 37.371176 110.373) (xy 18.402 110.373) (xy 18.402 108.480253) (xy 18.400313 108.463122)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(xy 18.400334 108.460076) (xy 18.399786 108.45449) (xy 18.389586 108.357441) (xy 18.382261 108.321755) (xy 18.375433 108.28596)
(xy 18.37381 108.280587) (xy 18.344954 108.187368) (xy 18.330836 108.153784) (xy 18.317185 108.119995) (xy 18.31455 108.115039)
(xy 18.268137 108.029201) (xy 18.247759 107.998989) (xy 18.227813 107.968509) (xy 18.224265 107.964159) (xy 18.162063 107.88897)
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(xy 18.136198 107.863285) (xy 18.127 107.853892) (xy 18.127 94.5) (xy 18.970451 94.5) (xy 18.973001 94.525891)
(xy 18.973 105.586117) (xy 18.970451 105.611998) (xy 18.973 105.637878) (xy 18.980626 105.715307) (xy 19.010761 105.814647)
(xy 19.059696 105.9062) (xy 19.125552 105.986446) (xy 19.145666 106.002953) (xy 22.997051 109.854339) (xy 23.013554 109.874448)
(xy 23.0938 109.940304) (xy 23.169238 109.980626) (xy 23.185352 109.989239) (xy 23.284692 110.019374) (xy 23.388001 110.029549)
(xy 23.413882 110.027) (xy 36.224119 110.027) (xy 36.25 110.029549) (xy 36.275881 110.027) (xy 36.35331 110.019374)
(xy 36.45265 109.989239) (xy 36.544202 109.940304) (xy 36.624448 109.874448) (xy 36.640955 109.854334) (xy 38.804344 107.690946)
(xy 38.824448 107.674448) (xy 38.890304 107.594202) (xy 38.939239 107.50265) (xy 38.969374 107.40331) (xy 38.977 107.325881)
(xy 38.979549 107.3) (xy 38.977 107.274119) (xy 38.977 106.835) (xy 40.526928 106.835) (xy 40.539188 106.959482)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(xy 40.575498 107.07918) (xy 40.634463 107.189494) (xy 40.713815 107.286185) (xy 40.810506 107.365537) (xy 40.92082 107.424502)
(xy 41.040518 107.460812) (xy 41.165 107.473072) (xy 41.35425 107.47) (xy 41.513 107.31125) (xy 41.513 106.5245)
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(xy 40.68875 106.5245) (xy 40.53 106.68325) (xy 40.526928 106.835) (xy 38.977 106.835) (xy 38.977 106.699505)
(xy 38.985463 106.694981) (xy 39.042869 106.647869) (xy 39.089981 106.590463) (xy 39.124988 106.52497) (xy 39.146545 106.453905)
(xy 39.153824 106.38) (xy 39.153824 105.32) (xy 39.146545 105.246095) (xy 39.124988 105.17503) (xy 39.089981 105.109537)
(xy 39.042869 105.052131) (xy 38.985463 105.005019) (xy 38.91997 104.970012) (xy 38.848905 104.948455) (xy 38.775 104.941176)
(xy 38.125 104.941176) (xy 38.051095 104.948455) (xy 37.98003 104.970012) (xy 37.975 104.972701) (xy 37.96997 104.970012)
(xy 37.898905 104.948455) (xy 37.825 104.941176) (xy 37.175 104.941176) (xy 37.101095 104.948455) (xy 37.03003 104.970012)
(xy 37.025 104.972701) (xy 37.01997 104.970012) (xy 36.948905 104.948455) (xy 36.875 104.941176) (xy 36.225 104.941176)
(xy 36.151095 104.948455) (xy 36.08003 104.970012) (xy 36.014537 105.005019) (xy 35.957131 105.052131) (xy 35.910019 105.109537)
(xy 35.875012 105.17503) (xy 35.853455 105.246095) (xy 35.846176 105.32) (xy 35.846176 106.38) (xy 35.853455 106.453905)
(xy 35.875012 106.52497) (xy 35.910019 106.590463) (xy 35.957131 106.647869) (xy 36.014537 106.694981) (xy 36.023 106.699505)
(xy 36.023001 107.731709) (xy 35.531711 108.223) (xy 34.772289 108.223) (xy 35.054339 107.940951) (xy 35.074448 107.924448)
(xy 35.140304 107.844202) (xy 35.189239 107.75265) (xy 35.219374 107.65331) (xy 35.224299 107.603309) (xy 35.229549 107.550001)
(xy 35.227 107.52412) (xy 35.227 106.699505) (xy 35.235463 106.694981) (xy 35.292869 106.647869) (xy 35.339981 106.590463)
(xy 35.374988 106.52497) (xy 35.396545 106.453905) (xy 35.403824 106.38) (xy 35.403824 105.32) (xy 35.396545 105.246095)
(xy 35.374988 105.17503) (xy 35.339981 105.109537) (xy 35.292869 105.052131) (xy 35.235463 105.005019) (xy 35.16997 104.970012)
(xy 35.098905 104.948455) (xy 35.025 104.941176) (xy 34.375 104.941176) (xy 34.301095 104.948455) (xy 34.23003 104.970012)
(xy 34.225 104.972701) (xy 34.21997 104.970012) (xy 34.148905 104.948455) (xy 34.075 104.941176) (xy 33.425 104.941176)
(xy 33.351095 104.948455) (xy 33.28003 104.970012) (xy 33.275 104.972701) (xy 33.26997 104.970012) (xy 33.198905 104.948455)
(xy 33.125 104.941176) (xy 32.475 104.941176) (xy 32.401095 104.948455) (xy 32.33003 104.970012) (xy 32.264537 105.005019)
(xy 32.207131 105.052131) (xy 32.160019 105.109537) (xy 32.125012 105.17503) (xy 32.103455 105.246095) (xy 32.096176 105.32)
(xy 32.096176 105.323) (xy 26.818291 105.323) (xy 25.073536 103.578246) (xy 28.583 103.578246) (xy 28.583 103.701754)
(xy 28.607095 103.822889) (xy 28.65436 103.936996) (xy 28.722977 104.039689) (xy 28.810311 104.127023) (xy 28.913004 104.19564)
(xy 29.027111 104.242905) (xy 29.148246 104.267) (xy 29.271754 104.267) (xy 29.392889 104.242905) (xy 29.506996 104.19564)
(xy 29.609689 104.127023) (xy 29.697023 104.039689) (xy 29.76564 103.936996) (xy 29.812905 103.822889) (xy 29.837 103.701754)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(xy 29.837 103.578246) (xy 29.812905 103.457111) (xy 29.76564 103.343004) (xy 29.737 103.300141) (xy 29.737 94.869769)
(xy 29.78564 94.796974) (xy 29.832905 94.682867) (xy 29.857 94.561732) (xy 29.857 94.438224) (xy 29.832905 94.317089)
(xy 29.78564 94.202982) (xy 29.717023 94.100289) (xy 29.629689 94.012955) (xy 29.526996 93.944338) (xy 29.412889 93.897073)
(xy 29.291754 93.872978) (xy 29.168246 93.872978) (xy 29.047111 93.897073) (xy 28.933004 93.944338) (xy 28.830311 94.012955)
(xy 28.742977 94.100289) (xy 28.67436 94.202982) (xy 28.627095 94.317089) (xy 28.603 94.438224) (xy 28.603 94.561732)
(xy 28.627095 94.682867) (xy 28.67436 94.796974) (xy 28.683001 94.809906) (xy 28.683 103.300141) (xy 28.65436 103.343004)
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(xy 28.607095 103.457111) (xy 28.583 103.578246) (xy 25.073536 103.578246) (xy 24.487 102.991711) (xy 24.487 101.609804)
(xy 24.541202 101.587353) (xy 24.742167 101.453073) (xy 24.913073 101.282167) (xy 25.013112 101.132447) (xy 25.011928 101.35)
(xy 25.024188 101.474482) (xy 25.060498 101.59418) (xy 25.119463 101.704494) (xy 25.198815 101.801185) (xy 25.295506 101.880537)
(xy 25.40582 101.939502) (xy 25.525518 101.975812) (xy 25.65 101.988072) (xy 26.21425 101.985) (xy 26.373 101.82625)
(xy 26.373 100.627) (xy 26.627 100.627) (xy 26.627 101.82625) (xy 26.78575 101.985) (xy 27.35 101.988072)
(xy 27.474482 101.975812) (xy 27.59418 101.939502) (xy 27.704494 101.880537) (xy 27.801185 101.801185) (xy 27.880537 101.704494)
(xy 27.939502 101.59418) (xy 27.975812 101.474482) (xy 27.988072 101.35) (xy 27.985 100.78575) (xy 27.82625 100.627)
(xy 26.627 100.627) (xy 26.373 100.627) (xy 26.353 100.627) (xy 26.353 100.373) (xy 26.373 100.373)
(xy 26.373 100.353) (xy 26.627 100.353) (xy 26.627 100.373) (xy 27.82625 100.373) (xy 27.985 100.21425)
(xy 27.988072 99.65) (xy 27.975812 99.525518) (xy 27.939502 99.40582) (xy 27.880537 99.295506) (xy 27.801185 99.198815)
(xy 27.704494 99.119463) (xy 27.59418 99.060498) (xy 27.474482 99.024188) (xy 27.35 99.011928) (xy 27.341443 99.011975)
(xy 27.348792 98.988397) (xy 26.5 98.139605) (xy 25.651208 98.988397) (xy 25.658557 99.011975) (xy 25.65 99.011928)
(xy 25.525518 99.024188) (xy 25.40582 99.060498) (xy 25.295506 99.119463) (xy 25.198815 99.198815) (xy 25.119463 99.295506)
(xy 25.060498 99.40582) (xy 25.024188 99.525518) (xy 25.011928 99.65) (xy 25.013112 99.867553) (xy 24.913073 99.717833)
(xy 24.742167 99.546927) (xy 24.541202 99.412647) (xy 24.317903 99.320153) (xy 24.080849 99.273) (xy 23.839151 99.273)
(xy 23.602097 99.320153) (xy 23.378798 99.412647) (xy 23.177833 99.546927) (xy 23.006927 99.717833) (xy 22.872647 99.918798)
(xy 22.780153 100.142097) (xy 22.733 100.379151) (xy 22.733 100.620849) (xy 22.780153 100.857903) (xy 22.872647 101.081202)
(xy 23.006927 101.282167) (xy 23.177833 101.453073) (xy 23.378798 101.587353) (xy 23.433 101.609805) (xy 23.433001 103.184109)
(xy 23.430451 103.21) (xy 23.440626 103.313309) (xy 23.470761 103.412649) (xy 23.519696 103.504201) (xy 23.524085 103.509549)
(xy 23.585553 103.584448) (xy 23.605662 103.600951) (xy 26.209054 106.204345) (xy 26.225552 106.224448) (xy 26.305798 106.290304)
(xy 26.39735 106.339239) (xy 26.463122 106.359191) (xy 26.49669 106.369374) (xy 26.6 106.379549) (xy 26.625881 106.377)
(xy 32.096176 106.377) (xy 32.096176 106.38) (xy 32.103455 106.453905) (xy 32.125012 106.52497) (xy 32.160019 106.590463)
(xy 32.207131 106.647869) (xy 32.264537 106.694981) (xy 32.33003 106.729988) (xy 32.401095 106.751545) (xy 32.475 106.758824)
(xy 33.125 106.758824) (xy 33.198905 106.751545) (xy 33.223 106.744236) (xy 33.223 106.910141) (xy 33.19436 106.953004)
(xy 33.147095 107.067111) (xy 33.123 107.188246) (xy 33.123 107.311754) (xy 33.147095 107.432889) (xy 33.16371 107.473)
(xy 32.96829 107.473) (xy 32.640955 107.145666) (xy 32.624448 107.125552) (xy 32.544202 107.059696) (xy 32.45265 107.010761)
(xy 32.35331 106.980626) (xy 32.275881 106.973) (xy 32.25 106.970451) (xy 32.224119 106.973) (xy 25.46829 106.973)
(xy 22.527 104.031711) (xy 22.527 100.138289) (xy 23.547895 99.117396) (xy 23.602097 99.139847) (xy 23.839151 99.187)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(xy 24.080849 99.187) (xy 24.317903 99.139847) (xy 24.541202 99.047353) (xy 24.742167 98.913073) (xy 24.913073 98.742167)
(xy 25.047353 98.541202) (xy 25.092152 98.433049) (xy 25.149081 98.593747) (xy 25.222528 98.731157) (xy 25.471603 98.808792)
(xy 26.320395 97.96) (xy 26.679605 97.96) (xy 27.528397 98.808792) (xy 27.777472 98.731157) (xy 27.903371 98.467117)
(xy 27.975339 98.183589) (xy 27.990611 97.891469) (xy 27.948599 97.601981) (xy 27.850919 97.326253) (xy 27.777472 97.188843)
(xy 27.528397 97.111208) (xy 26.679605 97.96) (xy 26.320395 97.96) (xy 25.471603 97.111208) (xy 25.222528 97.188843)
(xy 25.096629 97.452883) (xy 25.089566 97.480709) (xy 25.047353 97.378798) (xy 24.913073 97.177833) (xy 24.742167 97.006927)
(xy 24.541202 96.872647) (xy 24.317903 96.780153) (xy 24.080849 96.733) (xy 23.839151 96.733) (xy 23.602097 96.780153)
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(xy 23.378798 96.872647) (xy 23.177833 97.006927) (xy 23.006927 97.177833) (xy 22.872647 97.378798) (xy 22.780153 97.602097)
(xy 22.733 97.839151) (xy 22.733 98.080849) (xy 22.780153 98.317903) (xy 22.802604 98.372105) (xy 21.645662 99.529049)
(xy 21.625553 99.545552) (xy 21.568061 99.615606) (xy 21.559696 99.625799) (xy 21.510761 99.717351) (xy 21.480626 99.816691)
(xy 21.470451 99.92) (xy 21.473001 99.945891) (xy 21.473 104.224119) (xy 21.470451 104.25) (xy 21.475027 104.296464)
(xy 21.480626 104.353309) (xy 21.510761 104.452649) (xy 21.559696 104.544202) (xy 21.625552 104.624448) (xy 21.645666 104.640955)
(xy 24.859049 107.854339) (xy 24.875552 107.874448) (xy 24.941779 107.928799) (xy 24.955798 107.940304) (xy 25.04735 107.989239)
(xy 25.14669 108.019374) (xy 25.249999 108.029549) (xy 25.27588 108.027) (xy 32.03171 108.027) (xy 32.22771 108.223)
(xy 24.718291 108.223) (xy 21.277 104.781711) (xy 21.277 96.718289) (xy 22.048291 95.947) (xy 22.850196 95.947)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(xy 22.872647 96.001202) (xy 23.006927 96.202167) (xy 23.177833 96.373073) (xy 23.378798 96.507353) (xy 23.602097 96.599847)
(xy 23.839151 96.647) (xy 24.080849 96.647) (xy 24.317903 96.599847) (xy 24.541202 96.507353) (xy 24.629436 96.448397)
(xy 25.651208 96.448397) (xy 25.726514 96.69) (xy 25.651208 96.931603) (xy 26.5 97.780395) (xy 27.348792 96.931603)
(xy 27.273486 96.69) (xy 27.348792 96.448397) (xy 26.5 95.599605) (xy 25.651208 96.448397) (xy 24.629436 96.448397)
(xy 24.742167 96.373073) (xy 24.913073 96.202167) (xy 25.047353 96.001202) (xy 25.092152 95.893049) (xy 25.149081 96.053747)
(xy 25.222528 96.191157) (xy 25.471603 96.268792) (xy 26.320395 95.42) (xy 26.679605 95.42) (xy 27.528397 96.268792)
(xy 27.777472 96.191157) (xy 27.903371 95.927117) (xy 27.975339 95.643589) (xy 27.990611 95.351469) (xy 27.948599 95.061981)
(xy 27.850919 94.786253) (xy 27.777472 94.648843) (xy 27.528397 94.571208) (xy 26.679605 95.42) (xy 26.320395 95.42)
(xy 25.471603 94.571208) (xy 25.222528 94.648843) (xy 25.096629 94.912883) (xy 25.089566 94.940709) (xy 25.047353 94.838798)
(xy 24.913073 94.637833) (xy 24.742167 94.466927) (xy 24.541202 94.332647) (xy 24.317903 94.240153) (xy 24.080849 94.193)
(xy 23.839151 94.193) (xy 23.602097 94.240153) (xy 23.378798 94.332647) (xy 23.177833 94.466927) (xy 23.006927 94.637833)
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(xy 22.872647 94.838798) (xy 22.850196 94.893) (xy 21.855881 94.893) (xy 21.83 94.890451) (xy 21.804119 94.893)
(xy 21.72669 94.900626) (xy 21.62735 94.930761) (xy 21.535798 94.979696) (xy 21.455552 95.045552) (xy 21.439053 95.065656)
(xy 20.395662 96.109049) (xy 20.375553 96.125552) (xy 20.326149 96.185751) (xy 20.309696 96.205799) (xy 20.260761 96.297351)
(xy 20.230626 96.396691) (xy 20.220451 96.5) (xy 20.223001 96.525891) (xy 20.223 104.974119) (xy 20.220451 105)
(xy 20.229015 105.086948) (xy 20.230626 105.103309) (xy 20.260761 105.202649) (xy 20.309696 105.294202) (xy 20.375552 105.374448)
(xy 20.395666 105.390955) (xy 23.977709 108.973) (xy 23.606292 108.973) (xy 20.027 105.393709) (xy 20.027 94.718289)
(xy 21.33829 93.407) (xy 22.850196 93.407) (xy 22.872647 93.461202) (xy 23.006927 93.662167) (xy 23.177833 93.833073)
(xy 23.378798 93.967353) (xy 23.602097 94.059847) (xy 23.839151 94.107) (xy 24.080849 94.107) (xy 24.317903 94.059847)
(xy 24.541202 93.967353) (xy 24.629436 93.908397) (xy 25.651208 93.908397) (xy 25.726514 94.15) (xy 25.651208 94.391603)
(xy 26.5 95.240395) (xy 27.348792 94.391603) (xy 27.273486 94.15) (xy 27.348792 93.908397) (xy 26.5 93.059605)
(xy 25.651208 93.908397) (xy 24.629436 93.908397) (xy 24.742167 93.833073) (xy 24.913073 93.662167) (xy 25.047353 93.461202)
(xy 25.092152 93.353049) (xy 25.149081 93.513747) (xy 25.222528 93.651157) (xy 25.471603 93.728792) (xy 26.320395 92.88)
(xy 26.679605 92.88) (xy 27.528397 93.728792) (xy 27.777472 93.651157) (xy 27.903371 93.387117) (xy 27.975339 93.103589)
(xy 27.990611 92.811469) (xy 27.948599 92.521981) (xy 27.850919 92.246253) (xy 27.777472 92.108843) (xy 27.528397 92.031208)
(xy 26.679605 92.88) (xy 26.320395 92.88) (xy 25.471603 92.031208) (xy 25.222528 92.108843) (xy 25.096629 92.372883)
(xy 25.089566 92.400709) (xy 25.047353 92.298798) (xy 24.913073 92.097833) (xy 24.742167 91.926927) (xy 24.541202 91.792647)
(xy 24.317903 91.700153) (xy 24.080849 91.653) (xy 23.839151 91.653) (xy 23.602097 91.700153) (xy 23.378798 91.792647)
(xy 23.177833 91.926927) (xy 23.006927 92.097833) (xy 22.872647 92.298798) (xy 22.850196 92.353) (xy 21.145881 92.353)
(xy 21.12 92.350451) (xy 21.094119 92.353) (xy 21.01669 92.360626) (xy 20.91735 92.390761) (xy 20.825798 92.439696)
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(xy 20.745552 92.505552) (xy 20.729049 92.525661) (xy 19.145662 94.109049) (xy 19.125553 94.125552) (xy 19.087688 94.171691)
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(xy 19.059696 94.205799) (xy 19.010761 94.297351) (xy 18.980626 94.396691) (xy 18.970451 94.5) (xy 18.127 94.5)
(xy 18.127 90.219151) (xy 22.733 90.219151) (xy 22.733 90.460849) (xy 22.780153 90.697903) (xy 22.872647 90.921202)
(xy 23.006927 91.122167) (xy 23.177833 91.293073) (xy 23.378798 91.427353) (xy 23.602097 91.519847) (xy 23.839151 91.567)
(xy 24.080849 91.567) (xy 24.317903 91.519847) (xy 24.541202 91.427353) (xy 24.629436 91.368397) (xy 25.651208 91.368397)
(xy 25.726514 91.61) (xy 25.651208 91.851603) (xy 26.5 92.700395) (xy 27.348792 91.851603) (xy 27.273486 91.61)
(xy 27.348792 91.368397) (xy 26.5 90.519605) (xy 25.651208 91.368397) (xy 24.629436 91.368397) (xy 24.742167 91.293073)
(xy 24.913073 91.122167) (xy 25.047353 90.921202) (xy 25.092152 90.813049) (xy 25.149081 90.973747) (xy 25.222528 91.111157)
(xy 25.471603 91.188792) (xy 26.320395 90.34) (xy 26.679605 90.34) (xy 27.528397 91.188792) (xy 27.777472 91.111157)
(xy 27.903371 90.847117) (xy 27.975339 90.563589) (xy 27.990611 90.271469) (xy 27.948599 89.981981) (xy 27.850919 89.706253)
(xy 27.777472 89.568843) (xy 27.528397 89.491208) (xy 26.679605 90.34) (xy 26.320395 90.34) (xy 25.471603 89.491208)
(xy 25.222528 89.568843) (xy 25.096629 89.832883) (xy 25.089566 89.860709) (xy 25.047353 89.758798) (xy 24.913073 89.557833)
(xy 24.742167 89.386927) (xy 24.629437 89.311603) (xy 25.651208 89.311603) (xy 26.5 90.160395) (xy 27.348792 89.311603)
(xy 27.271157 89.062528) (xy 27.007117 88.936629) (xy 26.723589 88.864661) (xy 26.431469 88.849389) (xy 26.141981 88.891401)
(xy 25.866253 88.989081) (xy 25.728843 89.062528) (xy 25.651208 89.311603) (xy 24.629437 89.311603) (xy 24.541202 89.252647)
(xy 24.317903 89.160153) (xy 24.080849 89.113) (xy 23.839151 89.113) (xy 23.602097 89.160153) (xy 23.378798 89.252647)
(xy 23.177833 89.386927) (xy 23.006927 89.557833) (xy 22.872647 89.758798) (xy 22.780153 89.982097) (xy 22.733 90.219151)
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(xy 18.127 90.219151) (xy 18.127 85.938246) (xy 26.373 85.938246) (xy 26.373 86.061754) (xy 26.397095 86.182889)
(xy 26.44436 86.296996) (xy 26.512977 86.399689) (xy 26.600311 86.487023) (xy 26.703004 86.55564) (xy 26.817111 86.602905)
(xy 26.867673 86.612962) (xy 29.223001 88.968291) (xy 29.223 92.724119) (xy 29.220451 92.75) (xy 29.22508 92.796996)
(xy 29.230626 92.853309) (xy 29.260761 92.952649) (xy 29.309696 93.044202) (xy 29.375552 93.124448) (xy 29.395666 93.140955)
(xy 30.709049 94.454339) (xy 30.725552 94.474448) (xy 30.805798 94.540304) (xy 30.89735 94.589239) (xy 30.99669 94.619374)
(xy 31.074119 94.627) (xy 31.074121 94.627) (xy 31.099999 94.629549) (xy 31.125877 94.627) (xy 31.55776 94.627)
(xy 31.546927 94.637833) (xy 31.412647 94.838798) (xy 31.320153 95.062097) (xy 31.273 95.299151) (xy 31.273 95.540849)
(xy 31.320153 95.777903) (xy 31.412647 96.001202) (xy 31.546927 96.202167) (xy 31.717833 96.373073) (xy 31.918798 96.507353)
(xy 32.036798 96.556231) (xy 31.868748 96.615843) (xy 31.618645 96.764822) (xy 31.402412 96.959731) (xy 31.228359 97.19308)
(xy 31.103175 97.455901) (xy 31.058524 97.60311) (xy 31.179845 97.833) (xy 32.373 97.833) (xy 32.373 97.813)
(xy 32.627 97.813) (xy 32.627 97.833) (xy 32.647 97.833) (xy 32.647 98.087) (xy 32.627 98.087)
(xy 32.627 98.107) (xy 32.373 98.107) (xy 32.373 98.087) (xy 31.179845 98.087) (xy 31.058524 98.31689)
(xy 31.103175 98.464099) (xy 31.228359 98.72692) (xy 31.402412 98.960269) (xy 31.618645 99.155178) (xy 31.868748 99.304157)
(xy 32.036798 99.363769) (xy 31.918798 99.412647) (xy 31.717833 99.546927) (xy 31.546927 99.717833) (xy 31.412647 99.918798)
(xy 31.320153 100.142097) (xy 31.273 100.379151) (xy 31.273 100.620849) (xy 31.320153 100.857903) (xy 31.412647 101.081202)
(xy 31.546927 101.282167) (xy 31.717833 101.453073) (xy 31.918798 101.587353) (xy 32.142097 101.679847) (xy 32.379151 101.727)
(xy 32.620849 101.727) (xy 32.81666 101.688051) (xy 32.445666 102.059045) (xy 32.425552 102.075552) (xy 32.359696 102.155798)
(xy 32.314866 102.239671) (xy 32.310761 102.247351) (xy 32.280626 102.346691) (xy 32.270451 102.45) (xy 32.273 102.475881)
(xy 32.273 102.800495) (xy 32.264537 102.805019) (xy 32.207131 102.852131) (xy 32.160019 102.909537) (xy 32.125012 102.97503)
(xy 32.103455 103.046095) (xy 32.096176 103.12) (xy 32.096176 104.18) (xy 32.103455 104.253905) (xy 32.125012 104.32497)
(xy 32.160019 104.390463) (xy 32.207131 104.447869) (xy 32.264537 104.494981) (xy 32.33003 104.529988) (xy 32.401095 104.551545)
(xy 32.475 104.558824) (xy 32.91443 104.558824) (xy 32.973815 104.631185) (xy 33.070506 104.710537) (xy 33.18082 104.769502)
(xy 33.300518 104.805812) (xy 33.425 104.818072) (xy 33.46425 104.815) (xy 33.623 104.65625) (xy 33.623 103.777)
(xy 33.603 103.777) (xy 33.603 103.523) (xy 33.623 103.523) (xy 33.623 102.64375) (xy 33.48727 102.50802)
(xy 34.173001 101.822289) (xy 34.173001 102.49158) (xy 34.075 102.481928) (xy 34.03575 102.485) (xy 33.877 102.64375)
(xy 33.877 103.523) (xy 33.897 103.523) (xy 33.897 103.777) (xy 33.877 103.777) (xy 33.877 104.65625)
(xy 34.03575 104.815) (xy 34.075 104.818072) (xy 34.199482 104.805812) (xy 34.31918 104.769502) (xy 34.429494 104.710537)
(xy 34.526185 104.631185) (xy 34.58557 104.558824) (xy 35.025 104.558824) (xy 35.098905 104.551545) (xy 35.16997 104.529988)
(xy 35.235463 104.494981) (xy 35.292869 104.447869) (xy 35.339981 104.390463) (xy 35.374988 104.32497) (xy 35.396545 104.253905)
(xy 35.403824 104.18) (xy 35.403824 103.12) (xy 35.396545 103.046095) (xy 35.374988 102.97503) (xy 35.339981 102.909537)
(xy 35.292869 102.852131) (xy 35.235463 102.805019) (xy 35.227 102.800495) (xy 35.227 97.768289) (xy 35.473 97.522289)
(xy 35.473001 103.074109) (xy 35.470451 103.1) (xy 35.480626 103.203309) (xy 35.510761 103.302649) (xy 35.558867 103.39265)
(xy 35.559697 103.394202) (xy 35.625553 103.474448) (xy 35.645662 103.490951) (xy 35.846176 103.691465) (xy 35.846176 104.18)
(xy 35.853455 104.253905) (xy 35.875012 104.32497) (xy 35.910019 104.390463) (xy 35.957131 104.447869) (xy 36.014537 104.494981)
(xy 36.08003 104.529988) (xy 36.151095 104.551545) (xy 36.225 104.558824) (xy 36.66443 104.558824) (xy 36.723815 104.631185)
(xy 36.820506 104.710537) (xy 36.93082 104.769502) (xy 37.050518 104.805812) (xy 37.175 104.818072) (xy 37.21425 104.815)
(xy 37.373 104.65625) (xy 37.373 103.777) (xy 37.353 103.777) (xy 37.353 103.523) (xy 37.373 103.523)
(xy 37.373 102.64375) (xy 37.21425 102.485) (xy 37.175 102.481928) (xy 37.050518 102.494188) (xy 36.93082 102.530498)
(xy 36.820506 102.589463) (xy 36.723815 102.668815) (xy 36.66443 102.741176) (xy 36.527 102.741176) (xy 36.527 97.468289)
(xy 36.723 97.272289) (xy 36.723001 100.974109) (xy 36.720451 101) (xy 36.730626 101.103309) (xy 36.760761 101.202649)
(xy 36.809696 101.294201) (xy 36.814908 101.300552) (xy 36.875553 101.374448) (xy 36.895662 101.390951) (xy 37.723 102.218291)
(xy 37.723 102.54775) (xy 37.627 102.64375) (xy 37.627 103.523) (xy 37.647 103.523) (xy 37.647 103.777)
(xy 37.627 103.777) (xy 37.627 104.65625) (xy 37.78575 104.815) (xy 37.825 104.818072) (xy 37.949482 104.805812)
(xy 38.06918 104.769502) (xy 38.179494 104.710537) (xy 38.276185 104.631185) (xy 38.33557 104.558824) (xy 38.775 104.558824)
(xy 38.848905 104.551545) (xy 38.91997 104.529988) (xy 38.985463 104.494981) (xy 39.042869 104.447869) (xy 39.089981 104.390463)
(xy 39.124988 104.32497) (xy 39.146545 104.253905) (xy 39.153824 104.18) (xy 39.153824 103.12) (xy 39.146545 103.046095)
(xy 39.124988 102.97503) (xy 39.089981 102.909537) (xy 39.042869 102.852131) (xy 38.985463 102.805019) (xy 38.91997 102.770012)
(xy 38.848905 102.748455) (xy 38.777 102.741373) (xy 38.777 102.025881) (xy 38.779549 102) (xy 38.769374 101.89669)
(xy 38.761735 101.871508) (xy 38.739239 101.79735) (xy 38.690304 101.705798) (xy 38.624448 101.625552) (xy 38.604344 101.609053)
(xy 38.070416 101.075126) (xy 38.127169 101.092342) (xy 38.24375 101.103824) (xy 38.75625 101.103824) (xy 38.872831 101.092342)
(xy 38.984932 101.058336) (xy 39.088244 101.003115) (xy 39.178799 100.928799) (xy 39.253115 100.838244) (xy 39.308336 100.734932)
(xy 39.342342 100.622831) (xy 39.35178 100.527) (xy 40.08148 100.527) (xy 40.1 100.528824) (xy 41.55 100.528824)
(xy 41.56852 100.527) (xy 42.263596 100.527) (xy 42.251329 100.530721) (xy 42.172869 100.572659) (xy 42.104098 100.629098)
(xy 42.047659 100.697869) (xy 42.005721 100.776329) (xy 41.979896 100.861463) (xy 41.971176 100.95) (xy 41.971176 102.4)
(xy 41.979896 102.488537) (xy 42.005721 102.573671) (xy 42.047659 102.652131) (xy 42.104098 102.720902) (xy 42.172869 102.777341)
(xy 42.251329 102.819279) (xy 42.336463 102.845104) (xy 42.425 102.853824) (xy 42.575 102.853824) (xy 42.663537 102.845104)
(xy 42.748671 102.819279) (xy 42.75 102.818569) (xy 42.751329 102.819279) (xy 42.836463 102.845104) (xy 42.925 102.853824)
(xy 43.075 102.853824) (xy 43.163537 102.845104) (xy 43.248671 102.819279) (xy 43.25 102.818569) (xy 43.251329 102.819279)
(xy 43.336463 102.845104) (xy 43.425 102.853824) (xy 43.575 102.853824) (xy 43.663537 102.845104) (xy 43.748671 102.819279)
(xy 43.75 102.818569) (xy 43.751329 102.819279) (xy 43.836463 102.845104) (xy 43.925 102.853824) (xy 44.075 102.853824)
(xy 44.163537 102.845104) (xy 44.248671 102.819279) (xy 44.25 102.818569) (xy 44.251329 102.819279) (xy 44.336463 102.845104)
(xy 44.375738 102.848972) (xy 44.231711 102.993) (xy 42.96838 102.993) (xy 42.942499 102.990451) (xy 42.893175 102.995309)
(xy 42.83919 103.000626) (xy 42.73985 103.030761) (xy 42.648298 103.079696) (xy 42.568052 103.145552) (xy 42.551549 103.165661)
(xy 41.711035 104.006176) (xy 41.38375 104.006176) (xy 41.267169 104.017658) (xy 41.155068 104.051664) (xy 41.051756 104.106885)
(xy 40.961201 104.181201) (xy 40.886885 104.271756) (xy 40.831664 104.375068) (xy 40.797658 104.487169) (xy 40.786176 104.60375)
(xy 40.786176 105.04125) (xy 40.797658 105.157831) (xy 40.831664 105.269932) (xy 40.886885 105.373244) (xy 40.895666 105.383943)
(xy 40.810506 105.429463) (xy 40.713815 105.508815) (xy 40.634463 105.605506) (xy 40.575498 105.71582) (xy 40.539188 105.835518)
(xy 40.526928 105.96) (xy 40.53 106.11175) (xy 40.68875 106.2705) (xy 41.513 106.2705) (xy 41.513 106.2505)
(xy 41.767 106.2505) (xy 41.767 106.2705) (xy 41.787 106.2705) (xy 41.787 106.5245) (xy 41.767 106.5245)
(xy 41.767 107.31125) (xy 41.92575 107.47) (xy 42.115 107.473072) (xy 42.239482 107.460812) (xy 42.35918 107.424502)
(xy 42.373 107.417115) (xy 42.373 109) (xy 42.37544 109.024776) (xy 42.382667 109.048601) (xy 42.394403 109.070557)
(xy 42.410197 109.089803) (xy 42.429443 109.105597) (xy 42.451399 109.117333) (xy 42.475224 109.12456) (xy 42.5 109.127)
(xy 54.25 109.127) (xy 54.274776 109.12456) (xy 54.298601 109.117333) (xy 54.320557 109.105597) (xy 54.339803 109.089803)
(xy 54.355597 109.070557) (xy 54.367333 109.048601) (xy 54.37456 109.024776) (xy 54.377 109) (xy 54.377 105.31229)
(xy 55.419049 106.354339) (xy 55.435552 106.374448) (xy 55.494718 106.423004) (xy 55.515798 106.440304) (xy 55.60735 106.489239)
(xy 55.70669 106.519374) (xy 55.809999 106.529549) (xy 55.83588 106.527) (xy 56.660171 106.527) (xy 56.703004 106.55562)
(xy 56.817111 106.602885) (xy 56.938246 106.62698) (xy 57.061754 106.62698) (xy 57.182889 106.602885) (xy 57.296996 106.55562)
(xy 57.399689 106.487003) (xy 57.487023 106.399669) (xy 57.55564 106.296976) (xy 57.602905 106.182869) (xy 57.627 106.061734)
(xy 57.627 105.938226) (xy 57.602905 105.817091) (xy 57.55564 105.702984) (xy 57.487023 105.600291) (xy 57.399689 105.512957)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 57.296996 105.44434) (xy 57.223016 105.413696) (xy 57.237023 105.399689) (xy 57.30564 105.296996) (xy 57.352905 105.182889)
(xy 57.377 105.061754) (xy 57.377 104.938246) (xy 57.352905 104.817111) (xy 57.30564 104.703004) (xy 57.277 104.660141)
(xy 57.277 104.522289) (xy 60.20905 107.45434) (xy 60.225553 107.474449) (xy 60.300249 107.53575) (xy 60.305799 107.540305)
(xy 60.397351 107.58924) (xy 60.496691 107.619375) (xy 60.6 107.62955) (xy 60.625881 107.627001) (xy 67.874118 107.627001)
(xy 67.899999 107.62955) (xy 67.92588 107.627001) (xy 68.003309 107.619375) (xy 68.102649 107.58924) (xy 68.194201 107.540305)
(xy 68.274447 107.474449) (xy 68.290954 107.454335) (xy 70.755791 104.9895) (xy 73.285388 104.9895) (xy 73.320001 105)
(xy 73.265068 105.016664) (xy 73.161756 105.071885) (xy 73.071201 105.146201) (xy 72.996885 105.236756) (xy 72.941664 105.340068)
(xy 72.907658 105.452169) (xy 72.896176 105.56875) (xy 72.896176 106.00625) (xy 72.907658 106.122831) (xy 72.941664 106.234932)
(xy 72.996885 106.338244) (xy 73.071201 106.428799) (xy 73.161756 106.503115) (xy 73.265068 106.558336) (xy 73.377169 106.592342)
(xy 73.49375 106.603824) (xy 74.00625 106.603824) (xy 74.122831 106.592342) (xy 74.234932 106.558336) (xy 74.338244 106.503115)
(xy 74.428799 106.428799) (xy 74.503115 106.338244) (xy 74.558336 106.234932) (xy 74.592342 106.122831) (xy 74.60178 106.027)
(xy 75.21415 106.027) (xy 75.246885 106.088244) (xy 75.321201 106.178799) (xy 75.411756 106.253115) (xy 75.435501 106.265807)
(xy 75.435501 106.43661) (xy 75.4355 106.43662) (xy 75.4355 106.484194) (xy 75.411756 106.496885) (xy 75.321201 106.571201)
(xy 75.246885 106.661756) (xy 75.191664 106.765068) (xy 75.157658 106.877169) (xy 75.146176 106.99375) (xy 75.146176 107.50625)
(xy 75.157658 107.622831) (xy 75.191664 107.734932) (xy 75.246885 107.838244) (xy 75.321201 107.928799) (xy 75.411756 108.003115)
(xy 75.515068 108.058336) (xy 75.627169 108.092342) (xy 75.74375 108.103824) (xy 76.18125 108.103824) (xy 76.297831 108.092342)
(xy 76.409932 108.058336) (xy 76.513244 108.003115) (xy 76.523943 107.994334) (xy 76.569463 108.079494) (xy 76.648815 108.176185)
(xy 76.745506 108.255537) (xy 76.85582 108.314502) (xy 76.975518 108.350812) (xy 77.1 108.363072) (xy 77.25175 108.36)
(xy 77.4105 108.20125) (xy 77.4105 107.377) (xy 77.6645 107.377) (xy 77.6645 108.20125) (xy 77.82325 108.36)
(xy 77.975 108.363072) (xy 78.099482 108.350812) (xy 78.21918 108.314502) (xy 78.329494 108.255537) (xy 78.426185 108.176185)
(xy 78.505537 108.079494) (xy 78.564502 107.96918) (xy 78.600812 107.849482) (xy 78.613072 107.725) (xy 78.61 107.53575)
(xy 78.45125 107.377) (xy 77.6645 107.377) (xy 77.4105 107.377) (xy 77.3905 107.377) (xy 77.3905 107.123)
(xy 77.4105 107.123) (xy 77.4105 105.627) (xy 77.6645 105.627) (xy 77.6645 107.123) (xy 78.45125 107.123)
(xy 78.61 106.96425) (xy 78.613072 106.775) (xy 78.600812 106.650518) (xy 78.564502 106.53082) (xy 78.505537 106.420506)
(xy 78.468191 106.375) (xy 78.505537 106.329494) (xy 78.564502 106.21918) (xy 78.600812 106.099482) (xy 78.613072 105.975)
(xy 78.61 105.78575) (xy 78.45125 105.627) (xy 77.6645 105.627) (xy 77.4105 105.627) (xy 77.3905 105.627)
(xy 77.3905 105.373) (xy 77.4105 105.373) (xy 77.4105 104.54875) (xy 77.6645 104.54875) (xy 77.6645 105.373)
(xy 78.45125 105.373) (xy 78.61 105.21425) (xy 78.613072 105.025) (xy 78.600812 104.900518) (xy 78.564502 104.78082)
(xy 78.505537 104.670506) (xy 78.426185 104.573815) (xy 78.329494 104.494463) (xy 78.21918 104.435498) (xy 78.099482 104.399188)
(xy 77.975 104.386928) (xy 77.82325 104.39) (xy 77.6645 104.54875) (xy 77.4105 104.54875) (xy 77.25175 104.39)
(xy 77.1 104.386928) (xy 76.975518 104.399188) (xy 76.85582 104.435498) (xy 76.745506 104.494463) (xy 76.648815 104.573815)
(xy 76.569463 104.670506) (xy 76.523943 104.755666) (xy 76.513244 104.746885) (xy 76.409932 104.691664) (xy 76.297831 104.657658)
(xy 76.18125 104.646176) (xy 75.74375 104.646176) (xy 75.627169 104.657658) (xy 75.515068 104.691664) (xy 75.411756 104.746885)
(xy 75.321201 104.821201) (xy 75.246885 104.911756) (xy 75.21415 104.973) (xy 74.254269 104.973) (xy 74.338244 104.928115)
(xy 74.428799 104.853799) (xy 74.503115 104.763244) (xy 74.558336 104.659932) (xy 74.592342 104.547831) (xy 74.603824 104.43125)
(xy 74.603824 103.99375) (xy 74.592342 103.877169) (xy 74.558336 103.765068) (xy 74.503115 103.661756) (xy 74.428799 103.571201)
(xy 74.338244 103.496885) (xy 74.277 103.46415) (xy 74.277 103.28585) (xy 74.338244 103.253115) (xy 74.428799 103.178799)
(xy 74.503115 103.088244) (xy 74.558336 102.984932) (xy 74.592342 102.872831) (xy 74.603824 102.75625) (xy 74.603824 102.31875)
(xy 74.592342 102.202169) (xy 74.558336 102.090068) (xy 74.503115 101.986756) (xy 74.428799 101.896201) (xy 74.338244 101.821885)
(xy 74.234932 101.766664) (xy 74.179999 101.75) (xy 74.234932 101.733336) (xy 74.338244 101.678115) (xy 74.428799 101.603799)
(xy 74.503115 101.513244) (xy 74.515806 101.4895) (xy 75.145166 101.4895) (xy 75.161756 101.503115) (xy 75.265068 101.558336)
(xy 75.377169 101.592342) (xy 75.49375 101.603824) (xy 75.93125 101.603824) (xy 76.047831 101.592342) (xy 76.159932 101.558336)
(xy 76.263244 101.503115) (xy 76.353799 101.428799) (xy 76.428115 101.338244) (xy 76.483336 101.234932) (xy 76.5 101.179999)
(xy 76.516664 101.234932) (xy 76.571885 101.338244) (xy 76.646201 101.428799) (xy 76.736756 101.503115) (xy 76.760501 101.515807)
(xy 76.7605 101.734193) (xy 76.736756 101.746885) (xy 76.646201 101.821201) (xy 76.571885 101.911756) (xy 76.516664 102.015068)
(xy 76.5 102.070001) (xy 76.483336 102.015068) (xy 76.428115 101.911756) (xy 76.353799 101.821201) (xy 76.263244 101.746885)
(xy 76.159932 101.691664) (xy 76.047831 101.657658) (xy 75.93125 101.646176) (xy 75.49375 101.646176) (xy 75.377169 101.657658)
(xy 75.265068 101.691664) (xy 75.161756 101.746885) (xy 75.071201 101.821201) (xy 74.996885 101.911756) (xy 74.941664 102.015068)
(xy 74.907658 102.127169) (xy 74.896176 102.24375) (xy 74.896176 102.75625) (xy 74.907658 102.872831) (xy 74.941664 102.984932)
(xy 74.996885 103.088244) (xy 75.071201 103.178799) (xy 75.161756 103.253115) (xy 75.265068 103.308336) (xy 75.317322 103.324187)
(xy 75.338053 103.349448) (xy 75.358162 103.365951) (xy 75.846549 103.854339) (xy 75.863052 103.874448) (xy 75.943298 103.940304)
(xy 76.016721 103.979549) (xy 76.03485 103.989239) (xy 76.13419 104.019374) (xy 76.237499 104.029549) (xy 76.26338 104.027)
(xy 79.161619 104.027) (xy 79.1875 104.029549) (xy 79.213381 104.027) (xy 79.29081 104.019374) (xy 79.39015 103.989239)
(xy 79.481702 103.940304) (xy 79.561948 103.874448) (xy 79.578455 103.854334) (xy 80.057789 103.375) (xy 82.836928 103.375)
(xy 82.849188 103.499482) (xy 82.885498 103.61918) (xy 82.944463 103.729494) (xy 83.023815 103.826185) (xy 83.120506 103.905537)
(xy 83.23082 103.964502) (xy 83.350518 104.000812) (xy 83.475 104.013072) (xy 83.81425 104.01) (xy 83.973 103.85125)
(xy 83.973 102.627) (xy 84.227 102.627) (xy 84.227 103.85125) (xy 84.38575 104.01) (xy 84.725 104.013072)
(xy 84.849482 104.000812) (xy 84.96918 103.964502) (xy 85.079494 103.905537) (xy 85.176185 103.826185) (xy 85.255537 103.729494)
(xy 85.314502 103.61918) (xy 85.350812 103.499482) (xy 85.363072 103.375) (xy 85.36 102.78575) (xy 85.20125 102.627)
(xy 84.227 102.627) (xy 83.973 102.627) (xy 82.99875 102.627) (xy 82.84 102.78575) (xy 82.836928 103.375)
(xy 80.057789 103.375) (xy 80.066839 103.365951) (xy 80.086948 103.349448) (xy 80.107679 103.324187) (xy 80.159932 103.308336)
(xy 80.263244 103.253115) (xy 80.353799 103.178799) (xy 80.428115 103.088244) (xy 80.483336 102.984932) (xy 80.5 102.929999)
(xy 80.516664 102.984932) (xy 80.571885 103.088244) (xy 80.646201 103.178799) (xy 80.736756 103.253115) (xy 80.840068 103.308336)
(xy 80.952169 103.342342) (xy 81.06875 103.353824) (xy 81.50625 103.353824) (xy 81.622831 103.342342) (xy 81.734932 103.308336)
(xy 81.838244 103.253115) (xy 81.928799 103.178799) (xy 82.003115 103.088244) (xy 82.058336 102.984932) (xy 82.092342 102.872831)
(xy 82.103824 102.75625) (xy 82.103824 102.24375) (xy 82.092342 102.127169) (xy 82.058336 102.015068) (xy 82.003115 101.911756)
(xy 81.928799 101.821201) (xy 81.838244 101.746885) (xy 81.8145 101.734194) (xy 81.8145 101.625) (xy 82.836928 101.625)
(xy 82.84 102.21425) (xy 82.99875 102.373) (xy 83.973 102.373) (xy 83.973 101.14875) (xy 84.227 101.14875)
(xy 84.227 102.373) (xy 85.20125 102.373) (xy 85.36 102.21425) (xy 85.363072 101.625) (xy 85.350812 101.500518)
(xy 85.314502 101.38082) (xy 85.255537 101.270506) (xy 85.176185 101.173815) (xy 85.079494 101.094463) (xy 84.96918 101.035498)
(xy 84.849482 100.999188) (xy 84.725 100.986928) (xy 84.38575 100.99) (xy 84.227 101.14875) (xy 83.973 101.14875)
(xy 83.81425 100.99) (xy 83.475 100.986928) (xy 83.350518 100.999188) (xy 83.23082 101.035498) (xy 83.120506 101.094463)
(xy 83.023815 101.173815) (xy 82.944463 101.270506) (xy 82.885498 101.38082) (xy 82.849188 101.500518) (xy 82.836928 101.625)
(xy 81.8145 101.625) (xy 81.8145 101.515806) (xy 81.838244 101.503115) (xy 81.928799 101.428799) (xy 82.003115 101.338244)
(xy 82.058336 101.234932) (xy 82.092342 101.122831) (xy 82.103824 101.00625) (xy 82.103824 100.49375) (xy 82.092342 100.377169)
(xy 82.058336 100.265068) (xy 82.003115 100.161756) (xy 81.928799 100.071201) (xy 81.838244 99.996885) (xy 81.8145 99.984194)
(xy 81.8145 98.077) (xy 82.240875 98.077) (xy 82.246885 98.088244) (xy 82.321201 98.178799) (xy 82.411756 98.253115)
(xy 82.515068 98.308336) (xy 82.627169 98.342342) (xy 82.74375 98.353824) (xy 83.25625 98.353824) (xy 83.372831 98.342342)
(xy 83.484932 98.308336) (xy 83.588244 98.253115) (xy 83.678799 98.178799) (xy 83.753115 98.088244) (xy 83.808336 97.984932)
(xy 83.842342 97.872831) (xy 83.853824 97.75625) (xy 83.853824 97.31875) (xy 83.842342 97.202169) (xy 83.808336 97.090068)
(xy 83.753115 96.986756) (xy 83.744334 96.976057) (xy 83.829494 96.930537) (xy 83.926185 96.851185) (xy 84.005537 96.754494)
(xy 84.064502 96.64418) (xy 84.100812 96.524482) (xy 84.113072 96.4) (xy 84.11 96.24825) (xy 83.95125 96.0895)
(xy 83.127 96.0895) (xy 83.127 96.1095) (xy 82.873 96.1095) (xy 82.873 96.0895) (xy 82.853 96.0895)
(xy 82.853 95.8355) (xy 82.873 95.8355) (xy 82.873 95.8155) (xy 83.127 95.8155) (xy 83.127 95.8355)
(xy 83.95125 95.8355) (xy 84.11 95.67675) (xy 84.113072 95.525) (xy 84.100812 95.400518) (xy 84.064502 95.28082)
(xy 84.005537 95.170506) (xy 83.926185 95.073815) (xy 83.829494 94.994463) (xy 83.71918 94.935498) (xy 83.599482 94.899188)
(xy 83.475 94.886928) (xy 83.28575 94.89) (xy 83.127002 95.048748) (xy 83.127002 94.89) (xy 83.105289 94.89)
(xy 84.104339 93.890951) (xy 84.124448 93.874448) (xy 84.190304 93.794202) (xy 84.239239 93.70265) (xy 84.269374 93.60331)
(xy 84.277 93.525881) (xy 84.277 93.525879) (xy 84.279549 93.500001) (xy 84.277 93.474123) (xy 84.277 92.01)
(xy 89.141176 92.01) (xy 89.141176 93.99) (xy 89.148455 94.063905) (xy 89.170012 94.13497) (xy 89.205019 94.200463)
(xy 89.252131 94.257869) (xy 89.309537 94.304981) (xy 89.37503 94.339988) (xy 89.446095 94.361545) (xy 89.52 94.368824)
(xy 93.48 94.368824) (xy 93.553905 94.361545) (xy 93.62497 94.339988) (xy 93.690463 94.304981) (xy 93.747869 94.257869)
(xy 93.794981 94.200463) (xy 93.829988 94.13497) (xy 93.851545 94.063905) (xy 93.858824 93.99) (xy 93.858824 92.01)
(xy 93.851545 91.936095) (xy 93.829988 91.86503) (xy 93.794981 91.799537) (xy 93.747869 91.742131) (xy 93.690463 91.695019)
(xy 93.62497 91.660012) (xy 93.553905 91.638455) (xy 93.48 91.631176) (xy 89.52 91.631176) (xy 89.446095 91.638455)
(xy 89.37503 91.660012) (xy 89.309537 91.695019) (xy 89.252131 91.742131) (xy 89.205019 91.799537) (xy 89.170012 91.86503)
(xy 89.148455 91.936095) (xy 89.141176 92.01) (xy 84.277 92.01) (xy 84.277 89.275877) (xy 84.279549 89.249999)
(xy 84.276624 89.220304) (xy 84.269374 89.14669) (xy 84.239239 89.04735) (xy 84.190304 88.955798) (xy 84.124448 88.875552)
(xy 84.104339 88.859049) (xy 81.390955 86.145666) (xy 81.374448 86.125552) (xy 81.294202 86.059696) (xy 81.20265 86.010761)
(xy 81.10331 85.980626) (xy 81.025881 85.973) (xy 81 85.970451) (xy 80.974119 85.973) (xy 76.899804 85.973)
(xy 76.877353 85.918798) (xy 76.743073 85.717833) (xy 76.572167 85.546927) (xy 76.371202 85.412647) (xy 76.147903 85.320153)
(xy 75.910849 85.273) (xy 75.669151 85.273) (xy 75.432097 85.320153) (xy 75.377894 85.342605) (xy 74.680955 84.645666)
(xy 74.664448 84.625552) (xy 74.584202 84.559696) (xy 74.49265 84.510761) (xy 74.39331 84.480626) (xy 74.315881 84.473)
(xy 74.29 84.470451) (xy 74.264119 84.473) (xy 72.050881 84.473) (xy 72.025 84.470451) (xy 71.999119 84.473)
(xy 71.92169 84.480626) (xy 71.82235 84.510761) (xy 71.730798 84.559696) (xy 71.650552 84.625552) (xy 71.634053 84.645656)
(xy 70.145662 86.134049) (xy 70.125553 86.150552) (xy 70.117253 86.160666) (xy 70.015068 86.191664) (xy 69.911756 86.246885)
(xy 69.821201 86.321201) (xy 69.75 86.40796) (xy 69.678799 86.321201) (xy 69.588244 86.246885) (xy 69.484932 86.191664)
(xy 69.372831 86.157658) (xy 69.25625 86.146176) (xy 68.74375 86.146176) (xy 68.627169 86.157658) (xy 68.515068 86.191664)
(xy 68.411756 86.246885) (xy 68.321201 86.321201) (xy 68.246885 86.411756) (xy 68.191664 86.515068) (xy 68.157658 86.627169)
(xy 68.146176 86.74375) (xy 68.146176 87.18125) (xy 68.157658 87.297831) (xy 68.191664 87.409932) (xy 68.246885 87.513244)
(xy 68.321201 87.603799) (xy 68.411756 87.678115) (xy 68.515068 87.733336) (xy 68.570001 87.75) (xy 68.515068 87.766664)
(xy 68.411756 87.821885) (xy 68.321201 87.896201) (xy 68.246885 87.986756) (xy 68.191664 88.090068) (xy 68.157658 88.202169)
(xy 68.146176 88.31875) (xy 68.146176 88.75625) (xy 68.157658 88.872831) (xy 68.191664 88.984932) (xy 68.246885 89.088244)
(xy 68.321201 89.178799) (xy 68.411756 89.253115) (xy 68.515068 89.308336) (xy 68.627169 89.342342) (xy 68.74375 89.353824)
(xy 69.25625 89.353824) (xy 69.372831 89.342342) (xy 69.484932 89.308336) (xy 69.588244 89.253115) (xy 69.678799 89.178799)
(xy 69.75 89.09204) (xy 69.821201 89.178799) (xy 69.911756 89.253115) (xy 70.015068 89.308336) (xy 70.127169 89.342342)
(xy 70.24375 89.353824) (xy 70.75625 89.353824) (xy 70.872831 89.342342) (xy 70.984932 89.308336) (xy 71.088244 89.253115)
(xy 71.178799 89.178799) (xy 71.253115 89.088244) (xy 71.265806 89.0645) (xy 72.023 89.0645) (xy 72.023 89.160849)
(xy 72.070153 89.397903) (xy 72.162647 89.621202) (xy 72.296927 89.822167) (xy 72.467833 89.993073) (xy 72.668798 90.127353)
(xy 72.892097 90.219847) (xy 73.129151 90.267) (xy 73.370849 90.267) (xy 73.607903 90.219847) (xy 73.831202 90.127353)
(xy 73.923002 90.066015) (xy 73.923001 92.906709) (xy 73.445662 93.384049) (xy 73.425553 93.400552) (xy 73.393057 93.440149)
(xy 73.359696 93.480799) (xy 73.310761 93.572351) (xy 73.280626 93.671691) (xy 73.278214 93.696176) (xy 73.075 93.696176)
(xy 73.001095 93.703455) (xy 72.93003 93.725012) (xy 72.864537 93.760019) (xy 72.807131 93.807131) (xy 72.760019 93.864537)
(xy 72.748269 93.886519) (xy 72.70125 93.8395) (xy 71.877 93.8395) (xy 71.877 93.8595) (xy 71.623 93.8595)
(xy 71.623 93.8395) (xy 70.377 93.8395) (xy 70.377 93.8595) (xy 70.123 93.8595) (xy 70.123 93.8395)
(xy 70.103 93.8395) (xy 70.103 93.5855) (xy 70.123 93.5855) (xy 70.123 92.79875) (xy 70.377 92.79875)
(xy 70.377 93.5855) (xy 71.623 93.5855) (xy 71.623 92.79875) (xy 71.877 92.79875) (xy 71.877 93.5855)
(xy 72.70125 93.5855) (xy 72.86 93.42675) (xy 72.863072 93.275) (xy 72.850812 93.150518) (xy 72.814502 93.03082)
(xy 72.755537 92.920506) (xy 72.676185 92.823815) (xy 72.579494 92.744463) (xy 72.46918 92.685498) (xy 72.349482 92.649188)
(xy 72.225 92.636928) (xy 72.03575 92.64) (xy 71.877 92.79875) (xy 71.623 92.79875) (xy 71.46425 92.64)
(xy 71.275 92.636928) (xy 71.150518 92.649188) (xy 71.03082 92.685498) (xy 71 92.701972) (xy 70.96918 92.685498)
(xy 70.849482 92.649188) (xy 70.725 92.636928) (xy 70.53575 92.64) (xy 70.377 92.79875) (xy 70.123 92.79875)
(xy 69.96425 92.64) (xy 69.775 92.636928) (xy 69.650518 92.649188) (xy 69.53082 92.685498) (xy 69.420506 92.744463)
(xy 69.323815 92.823815) (xy 69.244463 92.920506) (xy 69.233402 92.9412) (xy 69.173725 92.923097) (xy 69.124448 92.863052)
(xy 69.104339 92.846549) (xy 68.027 91.769211) (xy 68.027 83.968289) (xy 68.606289 83.389) (xy 74.873 83.389)
(xy 74.873 83.611) (xy 74.91631 83.828734) (xy 75.001266 84.033835) (xy 75.124602 84.218421) (xy 75.281579 84.375398)
(xy 75.466165 84.498734) (xy 75.671266 84.58369) (xy 75.889 84.627) (xy 76.111 84.627) (xy 76.328734 84.58369)
(xy 76.360569 84.570503) (xy 76.640469 84.850404) (xy 76.623 84.938226) (xy 76.623 85.061734) (xy 76.647095 85.182869)
(xy 76.69436 85.296976) (xy 76.762977 85.399669) (xy 76.850311 85.487003) (xy 76.953004 85.55562) (xy 77.067111 85.602885)
(xy 77.188246 85.62698) (xy 77.311754 85.62698) (xy 77.432889 85.602885) (xy 77.546996 85.55562) (xy 77.649689 85.487003)
(xy 77.737023 85.399669) (xy 77.80564 85.296976) (xy 77.852905 85.182869) (xy 77.877 85.061734) (xy 77.877 84.938226)
(xy 77.852905 84.817091) (xy 77.80564 84.702984) (xy 77.737023 84.600291) (xy 77.725757 84.589025) (xy 77.716031 84.556964)
(xy 77.669417 84.469755) (xy 77.646437 84.441754) (xy 77.622399 84.412464) (xy 77.622397 84.412462) (xy 77.606684 84.393316)
(xy 77.587538 84.377603) (xy 77.070503 83.860569) (xy 77.08369 83.828734) (xy 77.109296 83.7) (xy 78.961928 83.7)
(xy 78.974188 83.824482) (xy 79.010498 83.94418) (xy 79.069463 84.054494) (xy 79.148815 84.151185) (xy 79.245506 84.230537)
(xy 79.35582 84.289502) (xy 79.475518 84.325812) (xy 79.6 84.338072) (xy 79.71425 84.335) (xy 79.873 84.17625)
(xy 79.873 83.377) (xy 80.127 83.377) (xy 80.127 84.17625) (xy 80.28575 84.335) (xy 80.4 84.338072)
(xy 80.524482 84.325812) (xy 80.64418 84.289502) (xy 80.754494 84.230537) (xy 80.851185 84.151185) (xy 80.930537 84.054494)
(xy 80.989502 83.94418) (xy 81.025812 83.824482) (xy 81.038072 83.7) (xy 81.035 83.53575) (xy 80.87625 83.377)
(xy 80.127 83.377) (xy 79.873 83.377) (xy 79.12375 83.377) (xy 78.965 83.53575) (xy 78.961928 83.7)
(xy 77.109296 83.7) (xy 77.127 83.611) (xy 77.127 83.389) (xy 77.08369 83.171266) (xy 76.998734 82.966165)
(xy 76.887707 82.8) (xy 78.961928 82.8) (xy 78.965 82.96425) (xy 79.12375 83.123) (xy 79.873 83.123)
(xy 79.873 82.32375) (xy 80.127 82.32375) (xy 80.127 83.123) (xy 80.87625 83.123) (xy 80.99925 83)
(xy 89.136386 83) (xy 89.16278 83.267979) (xy 89.240946 83.525659) (xy 89.367882 83.763139) (xy 89.538708 83.971292)
(xy 89.746861 84.142118) (xy 89.984341 84.269054) (xy 90.242021 84.34722) (xy 90.442848 84.367) (xy 92.557152 84.367)
(xy 92.757979 84.34722) (xy 93.015659 84.269054) (xy 93.253139 84.142118) (xy 93.461292 83.971292) (xy 93.632118 83.763139)
(xy 93.759054 83.525659) (xy 93.83722 83.267979) (xy 93.863614 83) (xy 93.83722 82.732021) (xy 93.759054 82.474341)
(xy 93.632118 82.236861) (xy 93.461292 82.028708) (xy 93.253139 81.857882) (xy 93.015659 81.730946) (xy 92.757979 81.65278)
(xy 92.557152 81.633) (xy 92.477 81.633) (xy 92.477 78.94976) (xy 92.497848 78.924356) (xy 92.550955 78.825)
(xy 93.136928 78.825) (xy 93.149188 78.949482) (xy 93.185498 79.06918) (xy 93.244463 79.179494) (xy 93.323815 79.276185)
(xy 93.420506 79.355537) (xy 93.53082 79.414502) (xy 93.650518 79.450812) (xy 93.775 79.463072) (xy 94.11425 79.46)
(xy 94.273 79.30125) (xy 94.273 77.627) (xy 94.527 77.627) (xy 94.527 79.30125) (xy 94.68575 79.46)
(xy 95.025 79.463072) (xy 95.149482 79.450812) (xy 95.26918 79.414502) (xy 95.379494 79.355537) (xy 95.476185 79.276185)
(xy 95.555537 79.179494) (xy 95.614502 79.06918) (xy 95.650812 78.949482) (xy 95.663072 78.825) (xy 95.66 77.78575)
(xy 95.50125 77.627) (xy 94.527 77.627) (xy 94.273 77.627) (xy 93.29875 77.627) (xy 93.14 77.78575)
(xy 93.136928 78.825) (xy 92.550955 78.825) (xy 92.555958 78.815641) (xy 92.591741 78.697677) (xy 92.603824 78.575)
(xy 92.603824 76.425) (xy 92.591741 76.302323) (xy 92.555958 76.184359) (xy 92.550956 76.175) (xy 93.136928 76.175)
(xy 93.14 77.21425) (xy 93.29875 77.373) (xy 94.273 77.373) (xy 94.273 75.69875) (xy 94.527 75.69875)
(xy 94.527 77.373) (xy 95.50125 77.373) (xy 95.66 77.21425) (xy 95.663072 76.175) (xy 95.650812 76.050518)
(xy 95.614502 75.93082) (xy 95.555537 75.820506) (xy 95.476185 75.723815) (xy 95.379494 75.644463) (xy 95.26918 75.585498)
(xy 95.149482 75.549188) (xy 95.025 75.536928) (xy 94.68575 75.54) (xy 94.527 75.69875) (xy 94.273 75.69875)
(xy 94.11425 75.54) (xy 93.775 75.536928) (xy 93.650518 75.549188) (xy 93.53082 75.585498) (xy 93.420506 75.644463)
(xy 93.323815 75.723815) (xy 93.244463 75.820506) (xy 93.185498 75.93082) (xy 93.149188 76.050518) (xy 93.136928 76.175)
(xy 92.550956 76.175) (xy 92.497848 76.075644) (xy 92.419646 75.980354) (xy 92.324356 75.902152) (xy 92.215641 75.844042)
(xy 92.097677 75.808259) (xy 91.975 75.796176) (xy 91.225 75.796176) (xy 91.102323 75.808259) (xy 90.984359 75.844042)
(xy 90.875644 75.902152) (xy 90.780354 75.980354) (xy 90.702152 76.075644) (xy 90.644042 76.184359) (xy 90.608259 76.302323)
(xy 90.596176 76.425) (xy 90.596176 78.575) (xy 90.608259 78.697677) (xy 90.644042 78.815641) (xy 90.702152 78.924356)
(xy 90.723 78.94976) (xy 90.723001 81.633) (xy 90.442848 81.633) (xy 90.242021 81.65278) (xy 89.984341 81.730946)
(xy 89.746861 81.857882) (xy 89.538708 82.028708) (xy 89.367882 82.236861) (xy 89.240946 82.474341) (xy 89.16278 82.732021)
(xy 89.136386 83) (xy 80.99925 83) (xy 81.035 82.96425) (xy 81.038072 82.8) (xy 81.025812 82.675518)
(xy 80.989502 82.55582) (xy 80.930537 82.445506) (xy 80.851185 82.348815) (xy 80.754494 82.269463) (xy 80.64418 82.210498)
(xy 80.524482 82.174188) (xy 80.4 82.161928) (xy 80.28575 82.165) (xy 80.127 82.32375) (xy 79.873 82.32375)
(xy 79.71425 82.165) (xy 79.6 82.161928) (xy 79.475518 82.174188) (xy 79.35582 82.210498) (xy 79.245506 82.269463)
(xy 79.148815 82.348815) (xy 79.069463 82.445506) (xy 79.010498 82.55582) (xy 78.974188 82.675518) (xy 78.961928 82.8)
(xy 76.887707 82.8) (xy 76.875398 82.781579) (xy 76.718421 82.624602) (xy 76.533835 82.501266) (xy 76.328734 82.41631)
(xy 76.111 82.373) (xy 75.889 82.373) (xy 75.671266 82.41631) (xy 75.466165 82.501266) (xy 75.281579 82.624602)
(xy 75.124602 82.781579) (xy 75.001266 82.966165) (xy 74.91631 83.171266) (xy 74.873 83.389) (xy 68.606289 83.389)
(xy 69.968291 82.027) (xy 74.607507 82.027) (xy 74.607628 82.027181) (xy 74.722819 82.142372) (xy 74.858269 82.232877)
(xy 75.008773 82.295218) (xy 75.168548 82.327) (xy 75.331452 82.327) (xy 75.491227 82.295218) (xy 75.641731 82.232877)
(xy 75.777181 82.142372) (xy 75.892372 82.027181) (xy 75.982877 81.891731) (xy 76.00969 81.827) (xy 78.294561 81.827)
(xy 78.300012 81.84497) (xy 78.335019 81.910463) (xy 78.382131 81.967869) (xy 78.439537 82.014981) (xy 78.50503 82.049988)
(xy 78.576095 82.071545) (xy 78.65 82.078824) (xy 79.45 82.078824) (xy 79.523905 82.071545) (xy 79.59497 82.049988)
(xy 79.660463 82.014981) (xy 79.717869 81.967869) (xy 79.764981 81.910463) (xy 79.799988 81.84497) (xy 79.805439 81.827)
(xy 80.194561 81.827) (xy 80.200012 81.84497) (xy 80.235019 81.910463) (xy 80.282131 81.967869) (xy 80.339537 82.014981)
(xy 80.40503 82.049988) (xy 80.476095 82.071545) (xy 80.55 82.078824) (xy 81.35 82.078824) (xy 81.423905 82.071545)
(xy 81.49497 82.049988) (xy 81.560463 82.014981) (xy 81.617869 81.967869) (xy 81.664981 81.910463) (xy 81.699988 81.84497)
(xy 81.721545 81.773905) (xy 81.728824 81.7) (xy 81.728824 81.172135) (xy 81.739239 81.15265) (xy 81.769374 81.05331)
(xy 81.77524 80.99375) (xy 81.779549 80.950001) (xy 81.777 80.92412) (xy 81.777 80.60178) (xy 81.872831 80.592342)
(xy 81.984932 80.558336) (xy 82.088244 80.503115) (xy 82.178799 80.428799) (xy 82.253115 80.338244) (xy 82.308336 80.234932)
(xy 82.342342 80.122831) (xy 82.353824 80.00625) (xy 82.353824 79.49375) (xy 82.342342 79.377169) (xy 82.308336 79.265068)
(xy 82.253115 79.161756) (xy 82.178799 79.071201) (xy 82.159814 79.055621) (xy 82.174356 79.047848) (xy 82.269646 78.969646)
(xy 82.347848 78.874356) (xy 82.405958 78.765641) (xy 82.441741 78.647677) (xy 82.453824 78.525) (xy 82.453824 77.775)
(xy 82.441741 77.652323) (xy 82.405958 77.534359) (xy 82.347848 77.425644) (xy 82.269646 77.330354) (xy 82.174356 77.252152)
(xy 82.065641 77.194042) (xy 81.947677 77.158259) (xy 81.825 77.146176) (xy 79.675 77.146176) (xy 79.552323 77.158259)
(xy 79.434359 77.194042) (xy 79.325644 77.252152) (xy 79.230354 77.330354) (xy 79.152152 77.425644) (xy 79.094042 77.534359)
(xy 79.058259 77.652323) (xy 79.056222 77.673) (xy 78.842553 77.673) (xy 78.777181 77.607628) (xy 78.641731 77.517123)
(xy 78.491227 77.454782) (xy 78.331452 77.423) (xy 78.168548 77.423) (xy 78.008773 77.454782) (xy 77.858269 77.517123)
(xy 77.797505 77.557724) (xy 77.766791 77.541307) (xy 77.838244 77.503115) (xy 77.928799 77.428799) (xy 78.003115 77.338244)
(xy 78.058336 77.234932) (xy 78.092342 77.122831) (xy 78.103824 77.00625) (xy 78.103824 76.56875) (xy 78.092342 76.452169)
(xy 78.058336 76.340068) (xy 78.003115 76.236756) (xy 77.994334 76.226057) (xy 78.079494 76.180537) (xy 78.176185 76.101185)
(xy 78.255537 76.004494) (xy 78.271302 75.975) (xy 78.786928 75.975) (xy 78.799188 76.099482) (xy 78.835498 76.21918)
(xy 78.894463 76.329494) (xy 78.973815 76.426185) (xy 79.070506 76.505537) (xy 79.18082 76.564502) (xy 79.300518 76.600812)
(xy 79.425 76.613072) (xy 80.46425 76.61) (xy 80.623 76.45125) (xy 80.623 75.477) (xy 80.877 75.477)
(xy 80.877 76.45125) (xy 81.03575 76.61) (xy 82.075 76.613072) (xy 82.199482 76.600812) (xy 82.31918 76.564502)
(xy 82.429494 76.505537) (xy 82.526185 76.426185) (xy 82.605537 76.329494) (xy 82.664502 76.21918) (xy 82.700812 76.099482)
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(xy 82.713072 75.975) (xy 82.71 75.63575) (xy 82.55125 75.477) (xy 80.877 75.477) (xy 80.623 75.477)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 78.94875 75.477) (xy 78.79 75.63575) (xy 78.786928 75.975) (xy 78.271302 75.975) (xy 78.314502 75.89418)
(xy 78.350812 75.774482) (xy 78.363072 75.65) (xy 78.36 75.49825) (xy 78.20125 75.3395) (xy 77.377 75.3395)
(xy 77.377 75.3595) (xy 77.123 75.3595) (xy 77.123 75.3395) (xy 77.103 75.3395) (xy 77.103 75.0855)
(xy 77.123 75.0855) (xy 77.123 74.29875) (xy 77.377 74.29875) (xy 77.377 75.0855) (xy 78.20125 75.0855)
(xy 78.36 74.92675) (xy 78.363072 74.775) (xy 78.358148 74.725) (xy 78.786928 74.725) (xy 78.79 75.06425)
(xy 78.94875 75.223) (xy 80.623 75.223) (xy 80.623 74.24875) (xy 80.877 74.24875) (xy 80.877 75.223)
(xy 82.55125 75.223) (xy 82.71 75.06425) (xy 82.713072 74.725) (xy 82.700812 74.600518) (xy 82.664502 74.48082)
(xy 82.605537 74.370506) (xy 82.526185 74.273815) (xy 82.429494 74.194463) (xy 82.31918 74.135498) (xy 82.199482 74.099188)
(xy 82.075 74.086928) (xy 81.03575 74.09) (xy 80.877 74.24875) (xy 80.623 74.24875) (xy 80.46425 74.09)
(xy 79.425 74.086928) (xy 79.300518 74.099188) (xy 79.18082 74.135498) (xy 79.070506 74.194463) (xy 78.973815 74.273815)
(xy 78.894463 74.370506) (xy 78.835498 74.48082) (xy 78.799188 74.600518) (xy 78.786928 74.725) (xy 78.358148 74.725)
(xy 78.350812 74.650518) (xy 78.314502 74.53082) (xy 78.255537 74.420506) (xy 78.176185 74.323815) (xy 78.079494 74.244463)
(xy 77.96918 74.185498) (xy 77.849482 74.149188) (xy 77.725 74.136928) (xy 77.53575 74.14) (xy 77.377 74.29875)
(xy 77.123 74.29875) (xy 76.96425 74.14) (xy 76.775 74.136928) (xy 76.650518 74.149188) (xy 76.53082 74.185498)
(xy 76.420506 74.244463) (xy 76.419501 74.245288) (xy 76.425812 74.224482) (xy 76.438072 74.1) (xy 76.435 73.38575)
(xy 76.27625 73.227) (xy 75.177 73.227) (xy 75.177 74.57625) (xy 75.33575 74.735) (xy 75.8 74.738072)
(xy 75.924482 74.725812) (xy 76.04418 74.689502) (xy 76.154494 74.630537) (xy 76.155499 74.629712) (xy 76.149188 74.650518)
(xy 76.136928 74.775) (xy 76.14 74.92675) (xy 76.298748 75.085498) (xy 76.14 75.085498) (xy 76.14 75.123008)
(xy 73.427 75.123008) (xy 73.427 74.478824) (xy 73.5 74.478824) (xy 73.573905 74.471545) (xy 73.64497 74.449988)
(xy 73.710463 74.414981) (xy 73.736793 74.393373) (xy 73.769463 74.454494) (xy 73.848815 74.551185) (xy 73.945506 74.630537)
(xy 74.05582 74.689502) (xy 74.175518 74.725812) (xy 74.3 74.738072) (xy 74.76425 74.735) (xy 74.923 74.57625)
(xy 74.923 73.227) (xy 74.903 73.227) (xy 74.903 72.973) (xy 74.923 72.973) (xy 74.923 71.62375)
(xy 75.177 71.62375) (xy 75.177 72.973) (xy 76.27625 72.973) (xy 76.435 72.81425) (xy 76.438072 72.1)
(xy 76.425812 71.975518) (xy 76.389502 71.85582) (xy 76.330537 71.745506) (xy 76.251185 71.648815) (xy 76.154494 71.569463)
(xy 76.04418 71.510498) (xy 75.924482 71.474188) (xy 75.8 71.461928) (xy 75.33575 71.465) (xy 75.177 71.62375)
(xy 74.923 71.62375) (xy 74.76425 71.465) (xy 74.3 71.461928) (xy 74.175518 71.474188) (xy 74.05582 71.510498)
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(xy 73.945506 71.569463) (xy 73.848815 71.648815) (xy 73.769463 71.745506) (xy 73.736793 71.806627) (xy 73.710463 71.785019)
(xy 73.64497 71.750012) (xy 73.573905 71.728455) (xy 73.5 71.721176) (xy 72 71.721176) (xy 71.926095 71.728455)
(xy 71.85503 71.750012) (xy 71.789537 71.785019) (xy 71.732131 71.832131) (xy 71.685019 71.889537) (xy 71.650012 71.95503)
(xy 71.628455 72.026095) (xy 71.621176 72.1) (xy 71.621176 74.1) (xy 71.628455 74.173905) (xy 71.650012 74.24497)
(xy 71.685019 74.310463) (xy 71.732131 74.367869) (xy 71.789537 74.414981) (xy 71.85503 74.449988) (xy 71.926095 74.471545)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 72 74.478824) (xy 72.073 74.478824) (xy 72.073 75.716755) (xy 72.069726 75.75) (xy 72.073 75.783245)
(xy 72.073 75.783251) (xy 72.073001 75.783261) (xy 72.073 78.021176) (xy 70.85 78.021176) (xy 70.776095 78.028455)
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(xy 70.70503 78.050012) (xy 70.639537 78.085019) (xy 70.582131 78.132131) (xy 70.535019 78.189537) (xy 70.500012 78.25503)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 70.478455 78.326095) (xy 70.471176 78.4) (xy 70.471176 80.4) (xy 70.478455 80.473905) (xy 70.500012 80.54497)
(xy 70.535019 80.610463) (xy 70.582131 80.667869) (xy 70.639537 80.714981) (xy 70.70503 80.749988) (xy 70.776095 80.771545)
(xy 70.85 80.778824) (xy 73.298178 80.778824) (xy 73.342285 80.792204) (xy 73.475 80.805275) (xy 73.508252 80.802)
(xy 74.806072 80.802) (xy 74.722819 80.857628) (xy 74.607628 80.972819) (xy 74.607507 80.973) (xy 69.775881 80.973)
(xy 69.75 80.970451) (xy 69.724119 80.973) (xy 69.64669 80.980626) (xy 69.54735 81.010761) (xy 69.455798 81.059696)
(xy 69.375552 81.125552) (xy 69.359054 81.145656) (xy 67.145662 83.359049) (xy 67.125553 83.375552) (xy 67.074102 83.438246)
(xy 67.059696 83.455799) (xy 67.010761 83.547351) (xy 66.980626 83.646691) (xy 66.970451 83.75) (xy 66.973001 83.775891)
(xy 66.973 86.748) (xy 66.761921 86.748) (xy 66.748734 86.716165) (xy 66.625398 86.531579) (xy 66.468421 86.374602)
(xy 66.283835 86.251266) (xy 66.078734 86.16631) (xy 65.861 86.123) (xy 65.639 86.123) (xy 65.421266 86.16631)
(xy 65.216165 86.251266) (xy 65.031579 86.374602) (xy 64.874602 86.531579) (xy 64.751266 86.716165) (xy 64.66631 86.921266)
(xy 64.623 87.139) (xy 64.623 87.361) (xy 64.66631 87.578734) (xy 64.751266 87.783835) (xy 64.874602 87.968421)
(xy 65.031579 88.125398) (xy 65.216165 88.248734) (xy 65.421266 88.33369) (xy 65.639 88.377) (xy 65.861 88.377)
(xy 66.078734 88.33369) (xy 66.283835 88.248734) (xy 66.468421 88.125398) (xy 66.625398 87.968421) (xy 66.748734 87.783835)
(xy 66.761921 87.752) (xy 66.973001 87.752) (xy 66.973 91.831107) (xy 66.897677 91.808259) (xy 66.775 91.796176)
(xy 66.025 91.796176) (xy 65.902323 91.808259) (xy 65.784359 91.844042) (xy 65.675644 91.902152) (xy 65.580354 91.980354)
(xy 65.502152 92.075644) (xy 65.444042 92.184359) (xy 65.408259 92.302323) (xy 65.396176 92.425) (xy 65.396176 93.34543)
(xy 65.380626 93.396691) (xy 65.370451 93.5) (xy 65.380626 93.603309) (xy 65.396176 93.65457) (xy 65.396176 94.575)
(xy 65.408259 94.697677) (xy 65.444042 94.815641) (xy 65.502152 94.924356) (xy 65.580354 95.019646) (xy 65.675644 95.097848)
(xy 65.784359 95.155958) (xy 65.902323 95.191741) (xy 66.025 95.203824) (xy 66.775 95.203824) (xy 66.897677 95.191741)
(xy 67.015641 95.155958) (xy 67.124356 95.097848) (xy 67.219646 95.019646) (xy 67.297848 94.924356) (xy 67.355958 94.815641)
(xy 67.391741 94.697677) (xy 67.403824 94.575) (xy 67.403824 94.2395) (xy 67.984194 94.2395) (xy 67.996885 94.263244)
(xy 68.071201 94.353799) (xy 68.161756 94.428115) (xy 68.265068 94.483336) (xy 68.320001 94.5) (xy 68.265068 94.516664)
(xy 68.161756 94.571885) (xy 68.071201 94.646201) (xy 67.996885 94.736756) (xy 67.941664 94.840068) (xy 67.907658 94.952169)
(xy 67.896176 95.06875) (xy 67.896176 95.50625) (xy 67.907658 95.622831) (xy 67.941664 95.734932) (xy 67.996885 95.838244)
(xy 68.071201 95.928799) (xy 68.161756 96.003115) (xy 68.265068 96.058336) (xy 68.377169 96.092342) (xy 68.49375 96.103824)
(xy 69.00625 96.103824) (xy 69.122831 96.092342) (xy 69.234932 96.058336) (xy 69.338244 96.003115) (xy 69.428799 95.928799)
(xy 69.5 95.84204) (xy 69.571201 95.928799) (xy 69.661756 96.003115) (xy 69.765068 96.058336) (xy 69.877169 96.092342)
(xy 69.99375 96.103824) (xy 70.50625 96.103824) (xy 70.622831 96.092342) (xy 70.734932 96.058336) (xy 70.838244 96.003115)
(xy 70.928799 95.928799) (xy 71 95.84204) (xy 71.071201 95.928799) (xy 71.161756 96.003115) (xy 71.265068 96.058336)
(xy 71.377169 96.092342) (xy 71.49375 96.103824) (xy 72.00625 96.103824) (xy 72.092445 96.095335) (xy 72.121333 96.104098)
(xy 72.17169 96.119374) (xy 72.275 96.129549) (xy 72.300881 96.127) (xy 72.696176 96.127) (xy 72.696176 96.168623)
(xy 72.6533 96.155616) (xy 72.575871 96.14799) (xy 72.54999 96.145441) (xy 72.524109 96.14799) (xy 69.125891 96.14799)
(xy 69.10001 96.145441) (xy 69.074129 96.14799) (xy 68.9967 96.155616) (xy 68.89736 96.185751) (xy 68.805808 96.234686)
(xy 68.725562 96.300542) (xy 68.709055 96.320656) (xy 68.395662 96.634049) (xy 68.375553 96.650552) (xy 68.367253 96.660666)
(xy 68.265068 96.691664) (xy 68.161756 96.746885) (xy 68.071201 96.821201) (xy 67.996885 96.911756) (xy 67.941664 97.015068)
(xy 67.907658 97.127169) (xy 67.896176 97.24375) (xy 67.896176 97.571034) (xy 67.853824 97.613386) (xy 67.853824 97.24375)
(xy 67.842342 97.127169) (xy 67.808336 97.015068) (xy 67.753115 96.911756) (xy 67.678799 96.821201) (xy 67.588244 96.746885)
(xy 67.578544 96.7417) (xy 67.602905 96.682889) (xy 67.627 96.561754) (xy 67.627 96.438246) (xy 67.602905 96.317111)
(xy 67.55564 96.203004) (xy 67.487023 96.100311) (xy 67.399689 96.012977) (xy 67.296996 95.94436) (xy 67.182889 95.897095)
(xy 67.061754 95.873) (xy 66.938246 95.873) (xy 66.817111 95.897095) (xy 66.703004 95.94436) (xy 66.600311 96.012977)
(xy 66.512977 96.100311) (xy 66.44436 96.203004) (xy 66.397095 96.317111) (xy 66.373 96.438246) (xy 66.373 96.561754)
(xy 66.397095 96.682889) (xy 66.421456 96.7417) (xy 66.411756 96.746885) (xy 66.321201 96.821201) (xy 66.246885 96.911756)
(xy 66.191664 97.015068) (xy 66.157658 97.127169) (xy 66.146176 97.24375) (xy 66.146176 97.68125) (xy 66.157658 97.797831)
(xy 66.191664 97.909932) (xy 66.246885 98.013244) (xy 66.321201 98.103799) (xy 66.411756 98.178115) (xy 66.515068 98.233336)
(xy 66.570001 98.25) (xy 66.515068 98.266664) (xy 66.411756 98.321885) (xy 66.321201 98.396201) (xy 66.246885 98.486756)
(xy 66.191664 98.590068) (xy 66.157658 98.702169) (xy 66.146176 98.81875) (xy 66.146176 99.25625) (xy 66.157658 99.372831)
(xy 66.191664 99.484932) (xy 66.246885 99.588244) (xy 66.321201 99.678799) (xy 66.411756 99.753115) (xy 66.473001 99.785851)
(xy 66.473 99.964149) (xy 66.411756 99.996885) (xy 66.321201 100.071201) (xy 66.246885 100.161756) (xy 66.191664 100.265068)
(xy 66.157658 100.377169) (xy 66.146176 100.49375) (xy 66.146176 100.93125) (xy 66.157658 101.047831) (xy 66.191664 101.159932)
(xy 66.246885 101.263244) (xy 66.255666 101.273943) (xy 66.170506 101.319463) (xy 66.073815 101.398815) (xy 65.994463 101.495506)
(xy 65.935498 101.60582) (xy 65.899188 101.725518) (xy 65.886928 101.85) (xy 65.89 102.00175) (xy 66.04875 102.1605)
(xy 66.873 102.1605) (xy 66.873 102.1405) (xy 67.127 102.1405) (xy 67.127 102.1605) (xy 67.95125 102.1605)
(xy 68.11 102.00175) (xy 68.113072 101.85) (xy 68.100812 101.725518) (xy 68.064502 101.60582) (xy 68.005537 101.495506)
(xy 67.926185 101.398815) (xy 67.829494 101.319463) (xy 67.744334 101.273943) (xy 67.753115 101.263244) (xy 67.808336 101.159932)
(xy 67.842342 101.047831) (xy 67.853824 100.93125) (xy 67.853824 100.49375) (xy 67.842342 100.377169) (xy 67.808336 100.265068)
(xy 67.753115 100.161756) (xy 67.678799 100.071201) (xy 67.588244 99.996885) (xy 67.527 99.96415) (xy 67.527 99.78585)
(xy 67.588244 99.753115) (xy 67.678799 99.678799) (xy 67.753115 99.588244) (xy 67.808336 99.484932) (xy 67.842342 99.372831)
(xy 67.853824 99.25625) (xy 67.853824 99.103965) (xy 67.896176 99.061613) (xy 67.896176 99.25625) (xy 67.907658 99.372831)
(xy 67.941664 99.484932) (xy 67.996885 99.588244) (xy 68.071201 99.678799) (xy 68.161756 99.753115) (xy 68.265068 99.808336)
(xy 68.377169 99.842342) (xy 68.49375 99.853824) (xy 69.00625 99.853824) (xy 69.122831 99.842342) (xy 69.234932 99.808336)
(xy 69.338244 99.753115) (xy 69.428799 99.678799) (xy 69.5 99.59204) (xy 69.571201 99.678799) (xy 69.661756 99.753115)
(xy 69.765068 99.808336) (xy 69.877169 99.842342) (xy 69.99375 99.853824) (xy 70.50625 99.853824) (xy 70.622831 99.842342)
(xy 70.734932 99.808336) (xy 70.838244 99.753115) (xy 70.928799 99.678799) (xy 70.973001 99.624938) (xy 70.973001 100.214149)
(xy 70.911756 100.246885) (xy 70.821201 100.321201) (xy 70.746885 100.411756) (xy 70.691664 100.515068) (xy 70.657658 100.627169)
(xy 70.646176 100.74375) (xy 70.646176 101.18125) (xy 70.657658 101.297831) (xy 70.691664 101.409932) (xy 70.746885 101.513244)
(xy 70.821201 101.603799) (xy 70.911756 101.678115) (xy 71.015068 101.733336) (xy 71.070001 101.75) (xy 71.015068 101.766664)
(xy 70.911756 101.821885) (xy 70.821201 101.896201) (xy 70.746885 101.986756) (xy 70.691664 102.090068) (xy 70.657658 102.202169)
(xy 70.646176 102.31875) (xy 70.646176 102.75625) (xy 70.657658 102.872831) (xy 70.691664 102.984932) (xy 70.746885 103.088244)
(xy 70.821201 103.178799) (xy 70.911756 103.253115) (xy 71.015068 103.308336) (xy 71.127169 103.342342) (xy 71.24375 103.353824)
(xy 71.75625 103.353824) (xy 71.872831 103.342342) (xy 71.984932 103.308336) (xy 72.088244 103.253115) (xy 72.178799 103.178799)
(xy 72.253115 103.088244) (xy 72.269414 103.05775) (xy 72.27831 103.056874) (xy 72.37765 103.026739) (xy 72.469202 102.977804)
(xy 72.549448 102.911948) (xy 72.565955 102.891834) (xy 72.896176 102.561613) (xy 72.896176 102.75625) (xy 72.907658 102.872831)
(xy 72.941664 102.984932) (xy 72.996885 103.088244) (xy 73.071201 103.178799) (xy 73.161756 103.253115) (xy 73.223 103.285851)
(xy 73.223 103.464149) (xy 73.161756 103.496885) (xy 73.071201 103.571201) (xy 72.996885 103.661756) (xy 72.941664 103.765068)
(xy 72.907658 103.877169) (xy 72.901913 103.9355) (xy 70.563381 103.9355) (xy 70.5375 103.932951) (xy 70.511619 103.9355)
(xy 70.43419 103.943126) (xy 70.33485 103.973261) (xy 70.243298 104.022196) (xy 70.163052 104.088052) (xy 70.146554 104.108155)
(xy 67.68171 106.573001) (xy 67.502 106.573001) (xy 67.502 106.011921) (xy 67.533835 105.998734) (xy 67.718421 105.875398)
(xy 67.875398 105.718421) (xy 67.998734 105.533835) (xy 68.08369 105.328734) (xy 68.127 105.111) (xy 68.127 104.889)
(xy 68.08369 104.671266) (xy 67.998734 104.466165) (xy 67.875398 104.281579) (xy 67.718421 104.124602) (xy 67.533835 104.001266)
(xy 67.328734 103.91631) (xy 67.111 103.873) (xy 66.889 103.873) (xy 66.671266 103.91631) (xy 66.466165 104.001266)
(xy 66.281579 104.124602) (xy 66.124602 104.281579) (xy 66.001266 104.466165) (xy 65.91631 104.671266) (xy 65.873 104.889)
(xy 65.873 105.111) (xy 65.91631 105.328734) (xy 66.001266 105.533835) (xy 66.124602 105.718421) (xy 66.281579 105.875398)
(xy 66.466165 105.998734) (xy 66.498 106.011921) (xy 66.498 106.573001) (xy 60.818291 106.573001) (xy 58.0622 103.816911)
(xy 58.182889 103.792905) (xy 58.296996 103.74564) (xy 58.399689 103.677023) (xy 58.487023 103.589689) (xy 58.52891 103.527)
(xy 59.02876 103.527) (xy 59.033259 103.572678) (xy 59.069042 103.690641) (xy 59.127152 103.799356) (xy 59.205354 103.894646)
(xy 59.300644 103.972848) (xy 59.409359 104.030958) (xy 59.527322 104.066741) (xy 59.649999 104.078824) (xy 60.300001 104.078824)
(xy 60.422678 104.066741) (xy 60.540641 104.030958) (xy 60.649356 103.972848) (xy 60.744646 103.894646) (xy 60.822848 103.799356)
(xy 60.880958 103.690641) (xy 60.916741 103.572678) (xy 60.928824 103.450001) (xy 60.928824 102.549999) (xy 60.916741 102.427322)
(xy 60.880958 102.309359) (xy 60.822848 102.200644) (xy 60.744646 102.105354) (xy 60.649356 102.027152) (xy 60.540641 101.969042)
(xy 60.502 101.957321) (xy 60.502 101.846856) (xy 60.547831 101.842342) (xy 60.659932 101.808336) (xy 60.763244 101.753115)
(xy 60.773943 101.744334) (xy 60.819463 101.829494) (xy 60.898815 101.926185) (xy 60.995506 102.005537) (xy 61.10582 102.064502)
(xy 61.225518 102.100812) (xy 61.257099 102.103922) (xy 61.255354 102.105354) (xy 61.177152 102.200644) (xy 61.119042 102.309359)
(xy 61.083259 102.427322) (xy 61.071176 102.549999) (xy 61.071176 103.450001) (xy 61.083259 103.572678) (xy 61.119042 103.690641)
(xy 61.177152 103.799356) (xy 61.255354 103.894646) (xy 61.350644 103.972848) (xy 61.459359 104.030958) (xy 61.577322 104.066741)
(xy 61.699999 104.078824) (xy 62.350001 104.078824) (xy 62.472678 104.066741) (xy 62.590641 104.030958) (xy 62.699356 103.972848)
(xy 62.794646 103.894646) (xy 62.872848 103.799356) (xy 62.930958 103.690641) (xy 62.966741 103.572678) (xy 62.966852 103.571555)
(xy 62.977941 103.565628) (xy 63.081027 103.481027) (xy 63.102226 103.455196) (xy 63.832422 102.725) (xy 65.886928 102.725)
(xy 65.899188 102.849482) (xy 65.935498 102.96918) (xy 65.994463 103.079494) (xy 66.073815 103.176185) (xy 66.170506 103.255537)
(xy 66.28082 103.314502) (xy 66.400518 103.350812) (xy 66.525 103.363072) (xy 66.71425 103.36) (xy 66.873 103.20125)
(xy 66.873 102.4145) (xy 67.127 102.4145) (xy 67.127 103.20125) (xy 67.28575 103.36) (xy 67.475 103.363072)
(xy 67.599482 103.350812) (xy 67.71918 103.314502) (xy 67.829494 103.255537) (xy 67.926185 103.176185) (xy 68.005537 103.079494)
(xy 68.064502 102.96918) (xy 68.100812 102.849482) (xy 68.113072 102.725) (xy 68.11 102.57325) (xy 67.95125 102.4145)
(xy 67.127 102.4145) (xy 66.873 102.4145) (xy 66.04875 102.4145) (xy 65.89 102.57325) (xy 65.886928 102.725)
(xy 63.832422 102.725) (xy 63.9552 102.602222) (xy 63.981026 102.581027) (xy 64.006491 102.549999) (xy 64.065628 102.477941)
(xy 64.074883 102.460626) (xy 64.128492 102.36033) (xy 64.167204 102.232715) (xy 64.177 102.133252) (xy 64.177 102.133243)
(xy 64.180274 102.100001) (xy 64.177 102.066759) (xy 64.177 99.803252) (xy 64.180275 99.77) (xy 64.167204 99.637285)
(xy 64.128492 99.50967) (xy 64.065628 99.392059) (xy 64.002224 99.314801) (xy 64.002222 99.314799) (xy 63.981027 99.288973)
(xy 63.955201 99.267778) (xy 62.032226 97.344804) (xy 62.011027 97.318973) (xy 61.907941 97.234372) (xy 61.79033 97.171508)
(xy 61.662715 97.132796) (xy 61.563252 97.123) (xy 61.563245 97.123) (xy 61.53 97.119726) (xy 61.496755 97.123)
(xy 60.457 97.123) (xy 60.457 96.086749) (xy 60.447204 95.987286) (xy 60.408492 95.85967) (xy 60.345628 95.742059)
(xy 60.261027 95.638973) (xy 60.157941 95.554372) (xy 60.106731 95.527) (xy 61.03171 95.527) (xy 61.137038 95.632328)
(xy 61.147095 95.682889) (xy 61.19436 95.796996) (xy 61.262977 95.899689) (xy 61.350311 95.987023) (xy 61.453004 96.05564)
(xy 61.567111 96.102905) (xy 61.688246 96.127) (xy 61.811754 96.127) (xy 61.932889 96.102905) (xy 62.046996 96.05564)
(xy 62.149689 95.987023) (xy 62.237023 95.899689) (xy 62.30564 95.796996) (xy 62.352905 95.682889) (xy 62.377 95.561754)
(xy 62.377 95.438246) (xy 62.352905 95.317111) (xy 62.30564 95.203004) (xy 62.237023 95.100311) (xy 62.149689 95.012977)
(xy 62.046996 94.94436) (xy 61.932889 94.897095) (xy 61.882328 94.887038) (xy 61.82029 94.825) (xy 62.336928 94.825)
(xy 62.349188 94.949482) (xy 62.385498 95.06918) (xy 62.444463 95.179494) (xy 62.523815 95.276185) (xy 62.620506 95.355537)
(xy 62.73082 95.414502) (xy 62.850518 95.450812) (xy 62.975 95.463072) (xy 63.31425 95.46) (xy 63.473 95.30125)
(xy 63.473 93.627) (xy 63.727 93.627) (xy 63.727 95.30125) (xy 63.88575 95.46) (xy 64.225 95.463072)
(xy 64.349482 95.450812) (xy 64.46918 95.414502) (xy 64.579494 95.355537) (xy 64.676185 95.276185) (xy 64.755537 95.179494)
(xy 64.814502 95.06918) (xy 64.850812 94.949482) (xy 64.863072 94.825) (xy 64.86 93.78575) (xy 64.70125 93.627)
(xy 63.727 93.627) (xy 63.473 93.627) (xy 62.49875 93.627) (xy 62.34 93.78575) (xy 62.336928 94.825)
(xy 61.82029 94.825) (xy 61.640955 94.645666) (xy 61.624448 94.625552) (xy 61.544202 94.559696) (xy 61.45265 94.510761)
(xy 61.35331 94.480626) (xy 61.275881 94.473) (xy 61.25 94.470451) (xy 61.224119 94.473) (xy 59.352289 94.473)
(xy 61.650289 92.175) (xy 62.336928 92.175) (xy 62.34 93.21425) (xy 62.49875 93.373) (xy 63.473 93.373)
(xy 63.473 91.69875) (xy 63.727 91.69875) (xy 63.727 93.373) (xy 64.70125 93.373) (xy 64.86 93.21425)
(xy 64.863072 92.175) (xy 64.850812 92.050518) (xy 64.814502 91.93082) (xy 64.755537 91.820506) (xy 64.676185 91.723815)
(xy 64.579494 91.644463) (xy 64.46918 91.585498) (xy 64.349482 91.549188) (xy 64.225 91.536928) (xy 63.88575 91.54)
(xy 63.727 91.69875) (xy 63.473 91.69875) (xy 63.31425 91.54) (xy 62.975 91.536928) (xy 62.850518 91.549188)
(xy 62.73082 91.585498) (xy 62.620506 91.644463) (xy 62.523815 91.723815) (xy 62.444463 91.820506) (xy 62.385498 91.93082)
(xy 62.349188 92.050518) (xy 62.336928 92.175) (xy 61.650289 92.175) (xy 61.914339 91.910951) (xy 61.934448 91.894448)
(xy 62.000304 91.814202) (xy 62.049239 91.72265) (xy 62.079374 91.62331) (xy 62.085679 91.559292) (xy 62.089549 91.520001)
(xy 62.087 91.49412) (xy 62.087 87.445789) (xy 65.928966 83.603824) (xy 66.25625 83.603824) (xy 66.372831 83.592342)
(xy 66.484932 83.558336) (xy 66.588244 83.503115) (xy 66.678799 83.428799) (xy 66.753115 83.338244) (xy 66.808336 83.234932)
(xy 66.842342 83.122831) (xy 66.853824 83.00625) (xy 66.853824 82.56875) (xy 66.842342 82.452169) (xy 66.808336 82.340068)
(xy 66.753115 82.236756) (xy 66.678799 82.146201) (xy 66.588244 82.071885) (xy 66.484932 82.016664) (xy 66.429999 82)
(xy 66.484932 81.983336) (xy 66.588244 81.928115) (xy 66.678799 81.853799) (xy 66.753115 81.763244) (xy 66.808336 81.659932)
(xy 66.842342 81.547831) (xy 66.853824 81.43125) (xy 66.853824 80.99375) (xy 66.842342 80.877169) (xy 66.808336 80.765068)
(xy 66.753115 80.661756) (xy 66.678799 80.571201) (xy 66.588244 80.496885) (xy 66.527 80.46415) (xy 66.527 80.320606)
(xy 66.59497 80.299988) (xy 66.660463 80.264981) (xy 66.717869 80.217869) (xy 66.764981 80.160463) (xy 66.799988 80.09497)
(xy 66.821545 80.023905) (xy 66.828824 79.95) (xy 66.911928 79.95) (xy 66.924188 80.074482) (xy 66.960498 80.19418)
(xy 67.019463 80.304494) (xy 67.098815 80.401185) (xy 67.195506 80.480537) (xy 67.30582 80.539502) (xy 67.425518 80.575812)
(xy 67.55 80.588072) (xy 67.66425 80.585) (xy 67.823 80.42625) (xy 67.823 79.627) (xy 68.077 79.627)
(xy 68.077 80.42625) (xy 68.23575 80.585) (xy 68.35 80.588072) (xy 68.474482 80.575812) (xy 68.59418 80.539502)
(xy 68.704494 80.480537) (xy 68.801185 80.401185) (xy 68.880537 80.304494) (xy 68.939502 80.19418) (xy 68.975812 80.074482)
(xy 68.988072 79.95) (xy 68.985 79.78575) (xy 68.82625 79.627) (xy 68.077 79.627) (xy 67.823 79.627)
(xy 67.07375 79.627) (xy 66.915 79.78575) (xy 66.911928 79.95) (xy 66.828824 79.95) (xy 66.828824 79.05)
(xy 66.911928 79.05) (xy 66.915 79.21425) (xy 67.07375 79.373) (xy 67.823 79.373) (xy 67.823 78.57375)
(xy 68.077 78.57375) (xy 68.077 79.373) (xy 68.82625 79.373) (xy 68.985 79.21425) (xy 68.988072 79.05)
(xy 68.975812 78.925518) (xy 68.939502 78.80582) (xy 68.880537 78.695506) (xy 68.801185 78.598815) (xy 68.704494 78.519463)
(xy 68.59418 78.460498) (xy 68.474482 78.424188) (xy 68.35 78.411928) (xy 68.23575 78.415) (xy 68.077 78.57375)
(xy 67.823 78.57375) (xy 67.66425 78.415) (xy 67.55 78.411928) (xy 67.425518 78.424188) (xy 67.30582 78.460498)
(xy 67.195506 78.519463) (xy 67.098815 78.598815) (xy 67.019463 78.695506) (xy 66.960498 78.80582) (xy 66.924188 78.925518)
(xy 66.911928 79.05) (xy 66.828824 79.05) (xy 66.821545 78.976095) (xy 66.799988 78.90503) (xy 66.764981 78.839537)
(xy 66.717869 78.782131) (xy 66.660463 78.735019) (xy 66.59497 78.700012) (xy 66.523905 78.678455) (xy 66.45 78.671176)
(xy 65.65 78.671176) (xy 65.576095 78.678455) (xy 65.50503 78.700012) (xy 65.439537 78.735019) (xy 65.382131 78.782131)
(xy 65.335019 78.839537) (xy 65.300012 78.90503) (xy 65.278455 78.976095) (xy 65.271176 79.05) (xy 65.271176 79.95)
(xy 65.278455 80.023905) (xy 65.300012 80.09497) (xy 65.335019 80.160463) (xy 65.382131 80.217869) (xy 65.439537 80.264981)
(xy 65.473001 80.282868) (xy 65.473 80.464149) (xy 65.411756 80.496885) (xy 65.321201 80.571201) (xy 65.246885 80.661756)
(xy 65.191664 80.765068) (xy 65.157658 80.877169) (xy 65.146176 80.99375) (xy 65.146176 81.43125) (xy 65.157658 81.547831)
(xy 65.191664 81.659932) (xy 65.246885 81.763244) (xy 65.321201 81.853799) (xy 65.411756 81.928115) (xy 65.515068 81.983336)
(xy 65.570001 82) (xy 65.515068 82.016664) (xy 65.411756 82.071885) (xy 65.321201 82.146201) (xy 65.246885 82.236756)
(xy 65.191664 82.340068) (xy 65.157658 82.452169) (xy 65.146176 82.56875) (xy 65.146176 82.896034) (xy 61.387 86.655211)
(xy 61.387 86.152324) (xy 61.389549 86.126446) (xy 61.383177 86.061754) (xy 61.379374 86.023137) (xy 61.349239 85.923797)
(xy 61.300304 85.832245) (xy 61.234448 85.751999) (xy 61.214339 85.735496) (xy 58.304508 82.825666) (xy 58.288001 82.805552)
(xy 58.207755 82.739696) (xy 58.116203 82.690761) (xy 58.016863 82.660626) (xy 57.939434 82.653) (xy 57.913553 82.650451)
(xy 57.898293 82.651954) (xy 57.856996 82.62436) (xy 57.742889 82.577095) (xy 57.621754 82.553) (xy 57.498246 82.553)
(xy 57.377111 82.577095) (xy 57.263004 82.62436) (xy 57.160311 82.692977) (xy 57.072977 82.780311) (xy 57.00436 82.883004)
(xy 56.957095 82.997111) (xy 56.933 83.118246) (xy 56.933 83.241754) (xy 56.957095 83.362889) (xy 57.00436 83.476996)
(xy 57.072977 83.579689) (xy 57.160311 83.667023) (xy 57.263004 83.73564) (xy 57.377111 83.782905) (xy 57.498246 83.807)
(xy 57.621754 83.807) (xy 57.742889 83.782905) (xy 57.762886 83.774622) (xy 59.375712 85.387449) (xy 59.35 85.386928)
(xy 59.225518 85.399188) (xy 59.10582 85.435498) (xy 58.995506 85.494463) (xy 58.898815 85.573815) (xy 58.819463 85.670506)
(xy 58.773943 85.755666) (xy 58.763244 85.746885) (xy 58.659932 85.691664) (xy 58.547831 85.657658) (xy 58.43125 85.646176)
(xy 57.99375 85.646176) (xy 57.877169 85.657658) (xy 57.765068 85.691664) (xy 57.661756 85.746885) (xy 57.571201 85.821201)
(xy 57.496885 85.911756) (xy 57.441664 86.015068) (xy 57.437285 86.029503) (xy 57.380798 86.059696) (xy 57.300552 86.125552)
(xy 57.284049 86.145661) (xy 55.958535 87.471176) (xy 55.45 87.471176) (xy 55.43148 87.473) (xy 55.225877 87.473)
(xy 55.199999 87.470451) (xy 55.174121 87.473) (xy 55.174119 87.473) (xy 55.09669 87.480626) (xy 54.99735 87.510761)
(xy 54.905798 87.559696) (xy 54.825552 87.625552) (xy 54.809045 87.645666) (xy 54.515662 87.939049) (xy 54.495553 87.955552)
(xy 54.448407 88.013) (xy 54.429696 88.035799) (xy 54.380761 88.127351) (xy 54.350626 88.226691) (xy 54.340451 88.33)
(xy 54.343 88.355881) (xy 54.343 88.60171) (xy 53.091711 89.853) (xy 52.635009 89.853) (xy 52.58794 89.814372)
(xy 52.470329 89.751508) (xy 52.342714 89.712796) (xy 52.21 89.699725) (xy 52.077285 89.712796) (xy 51.94967 89.751508)
(xy 51.832059 89.814372) (xy 51.754801 89.877776) (xy 50.542776 91.089802) (xy 50.542772 91.089807) (xy 50.244802 91.387776)
(xy 50.107418 91.52516) (xy 50.008773 91.544782) (xy 49.858269 91.607123) (xy 49.722819 91.697628) (xy 49.607628 91.812819)
(xy 49.517123 91.948269) (xy 49.454782 92.098773) (xy 49.423 92.258548) (xy 49.423 92.421452) (xy 49.454782 92.581227)
(xy 49.517123 92.731731) (xy 49.607628 92.867181) (xy 49.722819 92.982372) (xy 49.858269 93.072877) (xy 50.008773 93.135218)
(xy 50.168548 93.167) (xy 50.331452 93.167) (xy 50.491227 93.135218) (xy 50.641731 93.072877) (xy 50.777181 92.982372)
(xy 50.892372 92.867181) (xy 50.982877 92.731731) (xy 51.045218 92.581227) (xy 51.06484 92.482582) (xy 51.202224 92.345198)
(xy 51.500193 92.047228) (xy 51.500198 92.047224) (xy 52.640423 90.907) (xy 53.284119 90.907) (xy 53.31 90.909549)
(xy 53.335881 90.907) (xy 53.41331 90.899374) (xy 53.51265 90.869239) (xy 53.604202 90.820304) (xy 53.684448 90.754448)
(xy 53.700955 90.734334) (xy 54.996176 89.439114) (xy 54.996176 89.575) (xy 55.004896 89.663537) (xy 55.030721 89.748671)
(xy 55.031431 89.75) (xy 55.030721 89.751329) (xy 55.004896 89.836463) (xy 54.996176 89.925) (xy 54.996176 90.075)
(xy 55.004896 90.163537) (xy 55.030721 90.248671) (xy 55.031431 90.25) (xy 55.030721 90.251329) (xy 55.004896 90.336463)
(xy 54.996176 90.425) (xy 54.996176 90.575) (xy 55.004896 90.663537) (xy 55.030721 90.748671) (xy 55.031431 90.75)
(xy 55.030721 90.751329) (xy 55.004896 90.836463) (xy 54.996176 90.925) (xy 54.996176 91.075) (xy 55.004896 91.163537)
(xy 55.030721 91.248671) (xy 55.031431 91.25) (xy 55.030721 91.251329) (xy 55.004896 91.336463) (xy 54.996176 91.425)
(xy 54.996176 91.575) (xy 55.004896 91.663537) (xy 55.030721 91.748671) (xy 55.031431 91.75) (xy 55.030721 91.751329)
(xy 55.004896 91.836463) (xy 54.996176 91.925) (xy 54.996176 92.075) (xy 55.004896 92.163537) (xy 55.030721 92.248671)
(xy 55.031431 92.25) (xy 55.030721 92.251329) (xy 55.004896 92.336463) (xy 54.996176 92.425) (xy 54.996176 92.575)
(xy 55.004896 92.663537) (xy 55.030721 92.748671) (xy 55.031431 92.75) (xy 55.030721 92.751329) (xy 55.004896 92.836463)
(xy 54.996176 92.925) (xy 54.996176 93.075) (xy 55.004896 93.163537) (xy 55.030721 93.248671) (xy 55.031431 93.25)
(xy 55.030721 93.251329) (xy 55.004896 93.336463) (xy 54.996176 93.425) (xy 54.996176 93.575) (xy 55.004896 93.663537)
(xy 55.030721 93.748671) (xy 55.031431 93.75) (xy 55.030721 93.751329) (xy 55.004896 93.836463) (xy 54.996176 93.925)
(xy 54.996176 94.075) (xy 55.004896 94.163537) (xy 55.030721 94.248671) (xy 55.031431 94.25) (xy 55.030721 94.251329)
(xy 55.004896 94.336463) (xy 54.996176 94.425) (xy 54.996176 94.575) (xy 55.004896 94.663537) (xy 55.030721 94.748671)
(xy 55.031431 94.75) (xy 55.030721 94.751329) (xy 55.004896 94.836463) (xy 54.996176 94.925) (xy 54.996176 95.075)
(xy 55.004896 95.163537) (xy 55.030721 95.248671) (xy 55.031431 95.25) (xy 55.030721 95.251329) (xy 55.004896 95.336463)
(xy 54.996176 95.425) (xy 54.996176 95.575) (xy 55.004896 95.663537) (xy 55.030721 95.748671) (xy 55.031431 95.75)
(xy 55.030721 95.751329) (xy 55.004896 95.836463) (xy 54.996176 95.925) (xy 54.996176 96.075) (xy 55.004896 96.163537)
(xy 55.030721 96.248671) (xy 55.031431 96.25) (xy 55.030721 96.251329) (xy 55.004896 96.336463) (xy 54.996176 96.425)
(xy 54.996176 96.575) (xy 55.004896 96.663537) (xy 55.030721 96.748671) (xy 55.031431 96.75) (xy 55.030721 96.751329)
(xy 55.004896 96.836463) (xy 54.996176 96.925) (xy 54.996176 97.075) (xy 55.004896 97.163537) (xy 55.030721 97.248671)
(xy 55.031431 97.25) (xy 55.030721 97.251329) (xy 55.004896 97.336463) (xy 54.996176 97.425) (xy 54.996176 97.575)
(xy 55.004896 97.663537) (xy 55.030721 97.748671) (xy 55.031431 97.75) (xy 55.030721 97.751329) (xy 55.004896 97.836463)
(xy 54.996176 97.925) (xy 54.996176 98.037432) (xy 54.981027 98.018973) (xy 54.877941 97.934372) (xy 54.76033 97.871508)
(xy 54.632715 97.832796) (xy 54.533252 97.823) (xy 54.030423 97.823) (xy 53.832422 97.625) (xy 54.502223 96.955199)
(xy 54.565627 96.877941) (xy 54.628491 96.760331) (xy 54.667203 96.632715) (xy 54.680274 96.500001) (xy 54.667203 96.367286)
(xy 54.628491 96.239671) (xy 54.565627 96.12206) (xy 54.481026 96.018974) (xy 54.37794 95.934373) (xy 54.260329 95.871509)
(xy 54.132714 95.832797) (xy 53.999999 95.819726) (xy 53.867285 95.832797) (xy 53.739669 95.871509) (xy 53.622059 95.934373)
(xy 53.544801 95.997777) (xy 52.875 96.667578) (xy 52.022226 95.814804) (xy 52.001027 95.788973) (xy 51.897941 95.704372)
(xy 51.78033 95.641508) (xy 51.652715 95.602796) (xy 51.553252 95.593) (xy 51.553245 95.593) (xy 51.52 95.589726)
(xy 51.486755 95.593) (xy 51.270422 95.593) (xy 51.055668 95.378246) (xy 52.313 95.378246) (xy 52.313 95.501754)
(xy 52.337095 95.622889) (xy 52.38436 95.736996) (xy 52.452977 95.839689) (xy 52.540311 95.927023) (xy 52.643004 95.99564)
(xy 52.757111 96.042905) (xy 52.878246 96.067) (xy 53.001754 96.067) (xy 53.122889 96.042905) (xy 53.236996 95.99564)
(xy 53.339689 95.927023) (xy 53.427023 95.839689) (xy 53.49564 95.736996) (xy 53.542905 95.622889) (xy 53.552962 95.572327)
(xy 54.174339 94.950951) (xy 54.194448 94.934448) (xy 54.260304 94.854202) (xy 54.309239 94.76265) (xy 54.339374 94.66331)
(xy 54.347 94.585881) (xy 54.347 94.58588) (xy 54.349549 94.56) (xy 54.347 94.534119) (xy 54.347 92.029859)
(xy 54.37564 91.986996) (xy 54.422905 91.872889) (xy 54.447 91.751754) (xy 54.447 91.628246) (xy 54.422905 91.507111)
(xy 54.37564 91.393004) (xy 54.307023 91.290311) (xy 54.219689 91.202977) (xy 54.116996 91.13436) (xy 54.002889 91.087095)
(xy 53.881754 91.063) (xy 53.758246 91.063) (xy 53.637111 91.087095) (xy 53.523004 91.13436) (xy 53.420311 91.202977)
(xy 53.332977 91.290311) (xy 53.26436 91.393004) (xy 53.217095 91.507111) (xy 53.193 91.628246) (xy 53.193 91.751754)
(xy 53.217095 91.872889) (xy 53.26436 91.986996) (xy 53.293001 92.02986) (xy 53.293 94.34171) (xy 52.807673 94.827038)
(xy 52.757111 94.837095) (xy 52.643004 94.88436) (xy 52.540311 94.952977) (xy 52.452977 95.040311) (xy 52.38436 95.143004)
(xy 52.337095 95.257111) (xy 52.313 95.378246) (xy 51.055668 95.378246) (xy 49.862229 94.184807) (xy 49.862224 94.184801)
(xy 49.592219 93.914796) (xy 49.571026 93.888973) (xy 49.545204 93.867781) (xy 49.29484 93.617418) (xy 49.275218 93.518773)
(xy 49.212877 93.368269) (xy 49.122372 93.232819) (xy 49.007181 93.117628) (xy 48.871731 93.027123) (xy 48.721227 92.964782)
(xy 48.561452 92.933) (xy 48.398548 92.933) (xy 48.238773 92.964782) (xy 48.088269 93.027123) (xy 47.952819 93.117628)
(xy 47.837628 93.232819) (xy 47.747123 93.368269) (xy 47.684782 93.518773) (xy 47.653 93.678548) (xy 47.653 93.841452)
(xy 47.684782 94.001227) (xy 47.747123 94.151731) (xy 47.837628 94.287181) (xy 47.952819 94.402372) (xy 48.088269 94.492877)
(xy 48.238773 94.555218) (xy 48.337418 94.57484) (xy 48.413 94.650423) (xy 48.413001 97.933252) (xy 48.417346 97.977365)
(xy 48.38171 98.013) (xy 46.627 98.013) (xy 46.627 97.938246) (xy 46.602905 97.817111) (xy 46.55564 97.703004)
(xy 46.487023 97.600311) (xy 46.399689 97.512977) (xy 46.296996 97.44436) (xy 46.182889 97.397095) (xy 46.061754 97.373)
(xy 45.938246 97.373) (xy 45.817111 97.397095) (xy 45.703004 97.44436) (xy 45.600311 97.512977) (xy 45.512977 97.600311)
(xy 45.44436 97.703004) (xy 45.397095 97.817111) (xy 45.373 97.938246) (xy 45.373 98.061754) (xy 45.397095 98.182889)
(xy 45.416053 98.228657) (xy 44.665662 98.979049) (xy 44.645553 98.995552) (xy 44.603041 99.047353) (xy 44.579696 99.075799)
(xy 44.530761 99.167351) (xy 44.500626 99.266691) (xy 44.490451 99.37) (xy 44.493 99.395881) (xy 44.493 99.473)
(xy 42.26 99.473) (xy 42.26 99.372998) (xy 42.205252 99.372998) (xy 42.26 99.31825) (xy 42.24898 99.216642)
(xy 42.210974 99.097472) (xy 42.150449 98.988006) (xy 42.069731 98.892452) (xy 41.993703 98.831844) (xy 41.969279 98.751329)
(xy 41.968569 98.75) (xy 41.969279 98.748671) (xy 41.995104 98.663537) (xy 42.003824 98.575) (xy 42.003824 98.425)
(xy 41.995104 98.336463) (xy 41.969279 98.251329) (xy 41.968569 98.25) (xy 41.969279 98.248671) (xy 41.995104 98.163537)
(xy 42.003824 98.075) (xy 42.003824 97.925) (xy 41.995104 97.836463) (xy 41.969279 97.751329) (xy 41.968569 97.75)
(xy 41.969279 97.748671) (xy 41.993703 97.668156) (xy 42.069731 97.607548) (xy 42.150449 97.511994) (xy 42.210974 97.402528)
(xy 42.24898 97.283358) (xy 42.26 97.18175) (xy 42.10125 97.023) (xy 41.755998 97.023) (xy 41.723671 97.005721)
(xy 41.704811 97) (xy 41.723671 96.994279) (xy 41.755998 96.977) (xy 42.10125 96.977) (xy 42.26 96.81825)
(xy 42.24898 96.716642) (xy 42.210974 96.597472) (xy 42.150449 96.488006) (xy 42.069731 96.392452) (xy 41.993703 96.331844)
(xy 41.969279 96.251329) (xy 41.968569 96.25) (xy 41.969279 96.248671) (xy 41.995104 96.163537) (xy 42.003824 96.075)
(xy 42.003824 95.925) (xy 41.995104 95.836463) (xy 41.969279 95.751329) (xy 41.968569 95.75) (xy 41.969279 95.748671)
(xy 41.995104 95.663537) (xy 42.003824 95.575) (xy 42.003824 95.425) (xy 41.995104 95.336463) (xy 41.969279 95.251329)
(xy 41.968569 95.25) (xy 41.969279 95.248671) (xy 41.995104 95.163537) (xy 42.003824 95.075) (xy 42.003824 94.925)
(xy 41.995104 94.836463) (xy 41.969279 94.751329) (xy 41.968569 94.75) (xy 41.969279 94.748671) (xy 41.995104 94.663537)
(xy 42.003824 94.575) (xy 42.003824 94.527) (xy 44.663193 94.527) (xy 44.653 94.578246) (xy 44.653 94.701754)
(xy 44.677095 94.822889) (xy 44.72436 94.936996) (xy 44.753 94.979859) (xy 44.753 95.254119) (xy 44.750451 95.28)
(xy 44.753 95.30588) (xy 44.760626 95.383309) (xy 44.790761 95.482649) (xy 44.839696 95.574202) (xy 44.905552 95.654448)
(xy 44.925666 95.670955) (xy 46.637038 97.382329) (xy 46.647095 97.432889) (xy 46.69436 97.546996) (xy 46.762977 97.649689)
(xy 46.850311 97.737023) (xy 46.953004 97.80564) (xy 47.067111 97.852905) (xy 47.188246 97.877) (xy 47.311754 97.877)
(xy 47.432889 97.852905) (xy 47.546996 97.80564) (xy 47.649689 97.737023) (xy 47.737023 97.649689) (xy 47.80564 97.546996)
(xy 47.852905 97.432889) (xy 47.877 97.311754) (xy 47.877 97.188246) (xy 47.852905 97.067111) (xy 47.80564 96.953004)
(xy 47.737023 96.850311) (xy 47.649689 96.762977) (xy 47.546996 96.69436) (xy 47.432889 96.647095) (xy 47.382329 96.637038)
(xy 45.807 95.061711) (xy 45.807 94.979859) (xy 45.83564 94.936996) (xy 45.882905 94.822889) (xy 45.907 94.701754)
(xy 45.907 94.578246) (xy 45.896807 94.527) (xy 45.984119 94.527) (xy 46.01 94.529549) (xy 46.035881 94.527)
(xy 46.11331 94.519374) (xy 46.21265 94.489239) (xy 46.304202 94.440304) (xy 46.384448 94.374448) (xy 46.400955 94.354334)
(xy 50.081845 90.673444) (xy 50.177111 90.712905) (xy 50.298246 90.737) (xy 50.421754 90.737) (xy 50.542889 90.712905)
(xy 50.656996 90.66564) (xy 50.759689 90.597023) (xy 50.847023 90.509689) (xy 50.91564 90.406996) (xy 50.962905 90.292889)
(xy 50.987 90.171754) (xy 50.987 90.048246) (xy 50.962905 89.927111) (xy 50.91564 89.813004) (xy 50.847023 89.710311)
(xy 50.759689 89.622977) (xy 50.656996 89.55436) (xy 50.542889 89.507095) (xy 50.421754 89.483) (xy 50.358737 89.483)
(xy 50.534737 89.307) (xy 50.820143 89.307) (xy 50.863006 89.33564) (xy 50.977113 89.382905) (xy 51.098248 89.407)
(xy 51.221756 89.407) (xy 51.342891 89.382905) (xy 51.456998 89.33564) (xy 51.559691 89.267023) (xy 51.647025 89.179689)
(xy 51.715642 89.076996) (xy 51.762907 88.962889) (xy 51.787002 88.841754) (xy 51.787002 88.718246) (xy 51.762907 88.597111)
(xy 51.715642 88.483004) (xy 51.647025 88.380311) (xy 51.559691 88.292977) (xy 51.456998 88.22436) (xy 51.342891 88.177095)
(xy 51.221756 88.153) (xy 51.098248 88.153) (xy 50.977113 88.177095) (xy 50.863006 88.22436) (xy 50.820143 88.253)
(xy 50.342327 88.253) (xy 50.316446 88.250451) (xy 50.241495 88.257833) (xy 50.213137 88.260626) (xy 50.113797 88.290761)
(xy 50.022245 88.339696) (xy 49.941999 88.405552) (xy 49.925496 88.425661) (xy 45.378158 92.973) (xy 42.003824 92.973)
(xy 42.003824 92.925) (xy 41.995104 92.836463) (xy 41.969279 92.751329) (xy 41.968569 92.75) (xy 41.969279 92.748671)
(xy 41.995104 92.663537) (xy 42.003824 92.575) (xy 42.003824 92.425) (xy 41.995104 92.336463) (xy 41.969279 92.251329)
(xy 41.968569 92.25) (xy 41.969279 92.248671) (xy 41.995104 92.163537) (xy 42.003824 92.075) (xy 42.003824 91.925)
(xy 41.995104 91.836463) (xy 41.969279 91.751329) (xy 41.968569 91.75) (xy 41.969279 91.748671) (xy 41.995104 91.663537)
(xy 42.003824 91.575) (xy 42.003824 91.425) (xy 41.995104 91.336463) (xy 41.969279 91.251329) (xy 41.968569 91.25)
(xy 41.969279 91.248671) (xy 41.995104 91.163537) (xy 42.003824 91.075) (xy 42.003824 90.925) (xy 41.995104 90.836463)
(xy 41.969279 90.751329) (xy 41.968569 90.75) (xy 41.969279 90.748671) (xy 41.995104 90.663537) (xy 42.003824 90.575)
(xy 42.003824 90.425) (xy 41.995104 90.336463) (xy 41.969279 90.251329) (xy 41.968569 90.25) (xy 41.969279 90.248671)
(xy 41.995104 90.163537) (xy 42.003824 90.075) (xy 42.003824 89.925) (xy 41.995104 89.836463) (xy 41.969279 89.751329)
(xy 41.968569 89.75) (xy 41.969279 89.748671) (xy 41.995104 89.663537) (xy 42.003824 89.575) (xy 42.003824 89.425)
(xy 41.995104 89.336463) (xy 41.969279 89.251329) (xy 41.968569 89.25) (xy 41.969279 89.248671) (xy 41.995104 89.163537)
(xy 42.003824 89.075) (xy 42.003824 88.925) (xy 41.995104 88.836463) (xy 41.969279 88.751329) (xy 41.968569 88.75)
(xy 41.969279 88.748671) (xy 41.977216 88.722506) (xy 42.149049 88.894339) (xy 42.165552 88.914448) (xy 42.245798 88.980304)
(xy 42.33735 89.029239) (xy 42.43669 89.059374) (xy 42.514119 89.067) (xy 42.514121 89.067) (xy 42.539999 89.069549)
(xy 42.565877 89.067) (xy 44.400141 89.067) (xy 44.443004 89.09564) (xy 44.557111 89.142905) (xy 44.678246 89.167)
(xy 44.801754 89.167) (xy 44.922889 89.142905) (xy 45.036996 89.09564) (xy 45.139689 89.027023) (xy 45.227023 88.939689)
(xy 45.29564 88.836996) (xy 45.342905 88.722889) (xy 45.367 88.601754) (xy 45.367 88.478246) (xy 45.342905 88.357111)
(xy 45.29564 88.243004) (xy 45.227023 88.140311) (xy 45.139689 88.052977) (xy 45.036996 87.98436) (xy 44.922889 87.937095)
(xy 44.801754 87.913) (xy 44.678246 87.913) (xy 44.557111 87.937095) (xy 44.443004 87.98436) (xy 44.400141 88.013)
(xy 42.75829 88.013) (xy 42.390955 87.645666) (xy 42.374448 87.625552) (xy 42.294202 87.559696) (xy 42.20265 87.510761)
(xy 42.10331 87.480626) (xy 42.025881 87.473) (xy 42 87.470451) (xy 41.974119 87.473) (xy 41.56852 87.473)
(xy 41.55 87.471176) (xy 40.1 87.471176) (xy 40.011463 87.479896) (xy 39.926329 87.505721) (xy 39.847869 87.547659)
(xy 39.779098 87.604098) (xy 39.722659 87.672869) (xy 39.680721 87.751329) (xy 39.654896 87.836463) (xy 39.646176 87.925)
(xy 39.646176 88.075) (xy 39.654896 88.163537) (xy 39.680721 88.248671) (xy 39.681431 88.25) (xy 39.680721 88.251329)
(xy 39.654896 88.336463) (xy 39.646176 88.425) (xy 39.646176 88.473) (xy 38.544737 88.473) (xy 36.233159 86.161422)
(xy 36.71425 86.16) (xy 36.873 86.00125) (xy 36.873 85.027) (xy 35.19875 85.027) (xy 35.148743 85.077007)
(xy 34.654622 84.582886) (xy 34.662905 84.562889) (xy 34.687 84.441754) (xy 34.687 84.318246) (xy 34.678398 84.275)
(xy 35.036928 84.275) (xy 35.04 84.61425) (xy 35.19875 84.773) (xy 36.873 84.773) (xy 36.873 83.79875)
(xy 36.71425 83.64) (xy 35.675 83.636928) (xy 35.550518 83.649188) (xy 35.43082 83.685498) (xy 35.320506 83.744463)
(xy 35.223815 83.823815) (xy 35.144463 83.920506) (xy 35.085498 84.03082) (xy 35.049188 84.150518) (xy 35.036928 84.275)
(xy 34.678398 84.275) (xy 34.662905 84.197111) (xy 34.61564 84.083004) (xy 34.547023 83.980311) (xy 34.459689 83.892977)
(xy 34.356996 83.82436) (xy 34.242889 83.777095) (xy 34.121754 83.753) (xy 33.998246 83.753) (xy 33.877111 83.777095)
(xy 33.763004 83.82436) (xy 33.660311 83.892977) (xy 33.572977 83.980311) (xy 33.50436 84.083004) (xy 33.457095 84.197111)
(xy 33.433 84.318246) (xy 33.433 84.441754) (xy 33.457095 84.562889) (xy 33.50436 84.676996) (xy 33.531954 84.718293)
(xy 33.530451 84.733553) (xy 33.538552 84.8158) (xy 33.540626 84.836862) (xy 33.570761 84.936202) (xy 33.619696 85.027755)
(xy 33.685552 85.108001) (xy 33.705666 85.124508) (xy 37.554157 88.973) (xy 36.22829 88.973) (xy 34.112962 86.857673)
(xy 34.102905 86.807111) (xy 34.05564 86.693004) (xy 33.987023 86.590311) (xy 33.899689 86.502977) (xy 33.796996 86.43436)
(xy 33.682889 86.387095) (xy 33.561754 86.363) (xy 33.438246 86.363) (xy 33.317111 86.387095) (xy 33.203004 86.43436)
(xy 33.100311 86.502977) (xy 33.012977 86.590311) (xy 32.94436 86.693004) (xy 32.916223 86.760933) (xy 31.457 85.301711)
(xy 31.457 85.178246) (xy 31.432905 85.057111) (xy 31.38564 84.943004) (xy 31.317023 84.840311) (xy 31.229689 84.752977)
(xy 31.126996 84.68436) (xy 31.012889 84.637095) (xy 30.891754 84.613) (xy 30.768246 84.613) (xy 30.647111 84.637095)
(xy 30.533004 84.68436) (xy 30.430311 84.752977) (xy 30.342977 84.840311) (xy 30.27436 84.943004) (xy 30.251738 84.997619)
(xy 30.186996 84.95436) (xy 30.072889 84.907095) (xy 29.951754 84.883) (xy 29.828246 84.883) (xy 29.707111 84.907095)
(xy 29.593004 84.95436) (xy 29.490311 85.022977) (xy 29.402977 85.110311) (xy 29.33436 85.213004) (xy 29.287095 85.327111)
(xy 29.263 85.448246) (xy 29.263 85.571754) (xy 29.287095 85.692889) (xy 29.33436 85.806996) (xy 29.402977 85.909689)
(xy 29.490311 85.997023) (xy 29.593004 86.06564) (xy 29.707111 86.112905) (xy 29.770156 86.125445) (xy 32.49971 88.855)
(xy 32.372998 88.855) (xy 32.372998 89.013748) (xy 32.21425 88.855) (xy 31.65 88.851928) (xy 31.525518 88.864188)
(xy 31.40582 88.900498) (xy 31.295506 88.959463) (xy 31.198815 89.038815) (xy 31.119463 89.135506) (xy 31.060498 89.24582)
(xy 31.024188 89.365518) (xy 31.011928 89.49) (xy 31.015 90.05425) (xy 31.17375 90.213) (xy 32.373 90.213)
(xy 32.373 90.193) (xy 32.627 90.193) (xy 32.627 90.213) (xy 32.647 90.213) (xy 32.647 90.467)
(xy 32.627 90.467) (xy 32.627 90.487) (xy 32.373 90.487) (xy 32.373 90.467) (xy 31.17375 90.467)
(xy 31.015 90.62575) (xy 31.011928 91.19) (xy 31.024188 91.314482) (xy 31.060498 91.43418) (xy 31.119463 91.544494)
(xy 31.198815 91.641185) (xy 31.295506 91.720537) (xy 31.40582 91.779502) (xy 31.525518 91.815812) (xy 31.65 91.828072)
(xy 31.867553 91.826888) (xy 31.717833 91.926927) (xy 31.546927 92.097833) (xy 31.412647 92.298798) (xy 31.320153 92.522097)
(xy 31.273 92.759151) (xy 31.273 93.000849) (xy 31.320153 93.237903) (xy 31.412647 93.461202) (xy 31.487348 93.573)
(xy 31.31829 93.573) (xy 30.277 92.531711) (xy 30.277 88.775877) (xy 30.279549 88.749999) (xy 30.276639 88.720451)
(xy 30.269374 88.64669) (xy 30.239239 88.54735) (xy 30.190304 88.455798) (xy 30.124448 88.375552) (xy 30.104339 88.359049)
(xy 27.612962 85.867673) (xy 27.602905 85.817111) (xy 27.55564 85.703004) (xy 27.487023 85.600311) (xy 27.399689 85.512977)
(xy 27.296996 85.44436) (xy 27.182889 85.397095) (xy 27.061754 85.373) (xy 26.938246 85.373) (xy 26.817111 85.397095)
(xy 26.703004 85.44436) (xy 26.600311 85.512977) (xy 26.512977 85.600311) (xy 26.44436 85.703004) (xy 26.397095 85.817111)
(xy 26.373 85.938246) (xy 18.127 85.938246) (xy 18.127 83.036838) (xy 18.61425 83.035) (xy 18.773 82.87625)
(xy 18.773 81.927) (xy 19.027 81.927) (xy 19.027 82.87625) (xy 19.18575 83.035) (xy 20 83.038072)
(xy 20.124482 83.025812) (xy 20.24418 82.989502) (xy 20.354494 82.930537) (xy 20.451185 82.851185) (xy 20.530537 82.754494)
(xy 20.589502 82.64418) (xy 20.625812 82.524482) (xy 20.638072 82.4) (xy 20.635 82.08575) (xy 20.47625 81.927)
(xy 19.027 81.927) (xy 18.773 81.927) (xy 18.753 81.927) (xy 18.753 81.673) (xy 18.773 81.673)
(xy 18.773 80.72375) (xy 19.027 80.72375) (xy 19.027 81.673) (xy 20.47625 81.673) (xy 20.635 81.51425)
(xy 20.638072 81.2) (xy 20.625812 81.075518) (xy 20.589502 80.95582) (xy 20.530537 80.845506) (xy 20.451185 80.748815)
(xy 20.354494 80.669463) (xy 20.24418 80.610498) (xy 20.124482 80.574188) (xy 20 80.561928) (xy 19.18575 80.565)
(xy 19.027 80.72375) (xy 18.773 80.72375) (xy 18.61425 80.565) (xy 18.127 80.563162) (xy 18.127 77.894756)
(xy 18.244189 77.943297) (xy 18.413623 77.977) (xy 18.586377 77.977) (xy 18.755811 77.943297) (xy 18.915415 77.877187)
(xy 19.059055 77.78121) (xy 19.18121 77.659055) (xy 19.277187 77.515415) (xy 19.343297 77.355811) (xy 19.377 77.186377)
(xy 19.377 77.013623) (xy 19.343297 76.844189) (xy 19.277187 76.684585) (xy 19.18121 76.540945) (xy 19.059055 76.41879)
(xy 18.915415 76.322813) (xy 18.755811 76.256703) (xy 18.586377 76.223) (xy 18.413623 76.223) (xy 18.244189 76.256703)
(xy 18.127 76.305244) (xy 18.127 69.894756) (xy 18.244189 69.943297) (xy 18.413623 69.977) (xy 18.586377 69.977)
(xy 18.755811 69.943297) (xy 18.915415 69.877187) (xy 19.059055 69.78121) (xy 19.18121 69.659055) (xy 19.277187 69.515415)
(xy 19.343297 69.355811) (xy 19.377 69.186377) (xy 19.377 69.013623) (xy 19.343297 68.844189) (xy 19.277187 68.684585)
(xy 19.18121 68.540945) (xy 19.059055 68.41879) (xy 18.915415 68.322813) (xy 18.755811 68.256703) (xy 18.586377 68.223)
(xy 18.413623 68.223) (xy 18.244189 68.256703) (xy 18.127 68.305244) (xy 18.127 67.536838) (xy 18.61425 67.535)
(xy 18.773 67.37625) (xy 18.773 66.427) (xy 19.027 66.427) (xy 19.027 67.37625) (xy 19.18575 67.535)
(xy 20 67.538072) (xy 20.124482 67.525812) (xy 20.24418 67.489502) (xy 20.315886 67.451174) (xy 20.267274 67.510408)
(xy 20.185838 67.662764) (xy 20.13569 67.828078) (xy 20.118757 68) (xy 20.123001 68.043089) (xy 20.123 73.043078)
(xy 20.123001 73.043088) (xy 20.123 75.5944) (xy 19.850148 75.5944) (xy 19.750685 75.604196) (xy 19.62307 75.642908)
(xy 19.505459 75.705772) (xy 19.402373 75.790373) (xy 19.317772 75.893459) (xy 19.254908 76.01107) (xy 19.216196 76.138685)
(xy 19.203125 76.2714) (xy 19.216196 76.404115) (xy 19.254908 76.53173) (xy 19.317772 76.649341) (xy 19.402373 76.752427)
(xy 19.505459 76.837028) (xy 19.62307 76.899892) (xy 19.750685 76.938604) (xy 19.850148 76.9484) (xy 20.123001 76.9484)
(xy 20.123001 77.268711) (xy 20.118757 77.3118) (xy 20.13569 77.483722) (xy 20.185838 77.649036) (xy 20.267274 77.801392)
(xy 20.349406 77.901471) (xy 20.349409 77.901474) (xy 20.376868 77.934933) (xy 20.410327 77.962392) (xy 21.287603 78.839668)
(xy 21.315067 78.873133) (xy 21.448608 78.982727) (xy 21.600963 79.064162) (xy 21.766278 79.11431) (xy 21.895121 79.127)
(xy 21.895122 79.127) (xy 21.938199 79.131243) (xy 21.981276 79.127) (xy 24.556735 79.127) (xy 25.383 79.953265)
(xy 25.383001 82.686911) (xy 25.378757 82.73) (xy 25.39569 82.901922) (xy 25.445838 83.067236) (xy 25.527274 83.219592)
(xy 25.609406 83.319671) (xy 25.609409 83.319674) (xy 25.636868 83.353133) (xy 25.670327 83.380592) (xy 26.479408 84.189673)
(xy 26.506867 84.223133) (xy 26.540326 84.250592) (xy 26.540328 84.250594) (xy 26.605427 84.304019) (xy 26.640408 84.332727)
(xy 26.743327 84.387738) (xy 26.792763 84.414162) (xy 26.958077 84.46431) (xy 27.13 84.481243) (xy 27.173079 84.477)
(xy 29.856921 84.477) (xy 29.9 84.481243) (xy 29.943079 84.477) (xy 29.983692 84.473) (xy 30.071922 84.46431)
(xy 30.137754 84.44434) (xy 30.237237 84.414162) (xy 30.389592 84.332727) (xy 30.523133 84.223133) (xy 30.550597 84.189668)
(xy 31.763265 82.977) (xy 35.55024 82.977) (xy 35.575644 82.997848) (xy 35.684359 83.055958) (xy 35.802323 83.091741)
(xy 35.925 83.103824) (xy 37.373929 83.103824) (xy 37.426451 83.119756) (xy 37.5 83.127) (xy 38.573 83.127)
(xy 38.573 83.466747) (xy 38.569725 83.5) (xy 38.573001 83.533262) (xy 38.573001 83.68754) (xy 38.56918 83.685498)
(xy 38.449482 83.649188) (xy 38.325 83.636928) (xy 37.28575 83.64) (xy 37.127 83.79875) (xy 37.127 84.773)
(xy 37.147 84.773) (xy 37.147 85.027) (xy 37.127 85.027) (xy 37.127 86.00125) (xy 37.28575 86.16)
(xy 38.325 86.163072) (xy 38.449482 86.150812) (xy 38.56918 86.114502) (xy 38.679494 86.055537) (xy 38.776185 85.976185)
(xy 38.855537 85.879494) (xy 38.914502 85.76918) (xy 38.950812 85.649482) (xy 38.963072 85.525) (xy 38.96 85.18575)
(xy 38.879879 85.105629) (xy 38.926451 85.119756) (xy 38.983915 85.125416) (xy 38.98967 85.128492) (xy 39.117285 85.167204)
(xy 39.25 85.180275) (xy 39.283252 85.177) (xy 40.216748 85.177) (xy 40.25 85.180275) (xy 40.283252 85.177)
(xy 41.219578 85.177) (xy 41.544801 85.502224) (xy 41.622059 85.565628) (xy 41.73967 85.628492) (xy 41.867285 85.667204)
(xy 41.927882 85.673172) (xy 41.971176 85.716466) (xy 41.971176 87.05) (xy 41.979896 87.138537) (xy 42.005721 87.223671)
(xy 42.047659 87.302131) (xy 42.104098 87.370902) (xy 42.172869 87.427341) (xy 42.251329 87.469279) (xy 42.331844 87.493703)
(xy 42.392452 87.569731) (xy 42.488006 87.650449) (xy 42.597472 87.710974) (xy 42.716642 87.74898) (xy 42.81825 87.76)
(xy 42.977 87.60125) (xy 42.977 87.255998) (xy 42.994279 87.223671) (xy 43 87.204811) (xy 43.005721 87.223671)
(xy 43.023 87.255998) (xy 43.023 87.60125) (xy 43.18175 87.76) (xy 43.283358 87.74898) (xy 43.402528 87.710974)
(xy 43.511994 87.650449) (xy 43.607548 87.569731) (xy 43.668156 87.493703) (xy 43.748671 87.469279) (xy 43.75 87.468569)
(xy 43.751329 87.469279) (xy 43.836463 87.495104) (xy 43.925 87.503824) (xy 44.075 87.503824) (xy 44.163537 87.495104)
(xy 44.248671 87.469279) (xy 44.25 87.468569) (xy 44.251329 87.469279) (xy 44.336463 87.495104) (xy 44.425 87.503824)
(xy 44.575 87.503824) (xy 44.663537 87.495104) (xy 44.748671 87.469279) (xy 44.75 87.468569) (xy 44.751329 87.469279)
(xy 44.836463 87.495104) (xy 44.925 87.503824) (xy 45.075 87.503824) (xy 45.163537 87.495104) (xy 45.248671 87.469279)
(xy 45.25 87.468569) (xy 45.251329 87.469279) (xy 45.336463 87.495104) (xy 45.425 87.503824) (xy 45.575 87.503824)
(xy 45.663537 87.495104) (xy 45.748671 87.469279) (xy 45.75 87.468569) (xy 45.751329 87.469279) (xy 45.836463 87.495104)
(xy 45.925 87.503824) (xy 46.075 87.503824) (xy 46.163537 87.495104) (xy 46.248671 87.469279) (xy 46.25 87.468569)
(xy 46.251329 87.469279) (xy 46.336463 87.495104) (xy 46.425 87.503824) (xy 46.575 87.503824) (xy 46.663537 87.495104)
(xy 46.748671 87.469279) (xy 46.75 87.468569) (xy 46.751329 87.469279) (xy 46.836463 87.495104) (xy 46.875738 87.498972)
(xy 42.755655 91.619056) (xy 42.727673 91.647038) (xy 42.677111 91.657095) (xy 42.563004 91.70436) (xy 42.460311 91.772977)
(xy 42.372977 91.860311) (xy 42.30436 91.963004) (xy 42.257095 92.077111) (xy 42.233 92.198246) (xy 42.233 92.321754)
(xy 42.257095 92.442889) (xy 42.30436 92.556996) (xy 42.372977 92.659689) (xy 42.460311 92.747023) (xy 42.563004 92.81564)
(xy 42.677111 92.862905) (xy 42.798246 92.887) (xy 42.921754 92.887) (xy 43.042889 92.862905) (xy 43.156996 92.81564)
(xy 43.259689 92.747023) (xy 43.347023 92.659689) (xy 43.41564 92.556996) (xy 43.462905 92.442889) (xy 43.472962 92.392327)
(xy 43.500944 92.364345) (xy 47.303294 88.561996) (xy 47.33436 88.636996) (xy 47.402977 88.739689) (xy 47.490311 88.827023)
(xy 47.593004 88.89564) (xy 47.707111 88.942905) (xy 47.828246 88.967) (xy 47.951754 88.967) (xy 48.072889 88.942905)
(xy 48.186996 88.89564) (xy 48.289689 88.827023) (xy 48.377023 88.739689) (xy 48.44564 88.636996) (xy 48.492905 88.522889)
(xy 48.502962 88.472327) (xy 48.85829 88.117) (xy 52.647672 88.117) (xy 52.673553 88.119549) (xy 52.699434 88.117)
(xy 52.776863 88.109374) (xy 52.876203 88.079239) (xy 52.967755 88.030304) (xy 52.973001 88.025999) (xy 52.973001 88.039508)
(xy 52.913004 88.06436) (xy 52.810311 88.132977) (xy 52.722977 88.220311) (xy 52.65436 88.323004) (xy 52.607095 88.437111)
(xy 52.583 88.558246) (xy 52.583 88.681754) (xy 52.607095 88.802889) (xy 52.65436 88.916996) (xy 52.722977 89.019689)
(xy 52.810311 89.107023) (xy 52.913004 89.17564) (xy 53.027111 89.222905) (xy 53.148246 89.247) (xy 53.271754 89.247)
(xy 53.392889 89.222905) (xy 53.506996 89.17564) (xy 53.609689 89.107023) (xy 53.697023 89.019689) (xy 53.76564 88.916996)
(xy 53.812905 88.802889) (xy 53.822962 88.752327) (xy 53.854334 88.720955) (xy 53.874448 88.704448) (xy 53.940304 88.624202)
(xy 53.989239 88.53265) (xy 54.019374 88.43331) (xy 54.027 88.355881) (xy 54.029549 88.33) (xy 54.027 88.304119)
(xy 54.027 87.503824) (xy 54.075 87.503824) (xy 54.163537 87.495104) (xy 54.248671 87.469279) (xy 54.25 87.468569)
(xy 54.251329 87.469279) (xy 54.336463 87.495104) (xy 54.425 87.503824) (xy 54.575 87.503824) (xy 54.663537 87.495104)
(xy 54.748671 87.469279) (xy 54.827131 87.427341) (xy 54.895902 87.370902) (xy 54.952341 87.302131) (xy 54.994279 87.223671)
(xy 55.020104 87.138537) (xy 55.028824 87.05) (xy 55.028824 86.541465) (xy 55.780062 85.790228) (xy 55.859689 85.737023)
(xy 55.947023 85.649689) (xy 56.01564 85.546996) (xy 56.062905 85.432889) (xy 56.087 85.311754) (xy 56.087 85.188246)
(xy 56.062905 85.067111) (xy 56.01564 84.953004) (xy 55.947023 84.850311) (xy 55.859689 84.762977) (xy 55.756996 84.69436)
(xy 55.642889 84.647095) (xy 55.53739 84.62611) (xy 55.765705 84.397795) (xy 55.816266 84.387738) (xy 55.930373 84.340473)
(xy 56.033066 84.271856) (xy 56.1204 84.184522) (xy 56.189017 84.081829) (xy 56.236282 83.967722) (xy 56.260377 83.846587)
(xy 56.260377 83.723079) (xy 56.236282 83.601944) (xy 56.189017 83.487837) (xy 56.1204 83.385144) (xy 56.033066 83.29781)
(xy 55.930373 83.229193) (xy 55.816266 83.181928) (xy 55.695131 83.157833) (xy 55.571623 83.157833) (xy 55.450488 83.181928)
(xy 55.336381 83.229193) (xy 55.233688 83.29781) (xy 55.146354 83.385144) (xy 55.077737 83.487837) (xy 55.030472 83.601944)
(xy 55.020415 83.652505) (xy 53.645662 85.027259) (xy 53.625553 85.043762) (xy 53.572834 85.108001) (xy 53.559696 85.124009)
(xy 53.547848 85.146176) (xy 53.425 85.146176) (xy 53.336463 85.154896) (xy 53.251329 85.180721) (xy 53.25 85.181431)
(xy 53.248671 85.180721) (xy 53.163537 85.154896) (xy 53.075 85.146176) (xy 53.027 85.146176) (xy 53.027 84.558289)
(xy 53.396017 84.189272) (xy 53.402977 84.199689) (xy 53.490311 84.287023) (xy 53.593004 84.35564) (xy 53.707111 84.402905)
(xy 53.828246 84.427) (xy 53.951754 84.427) (xy 54.072889 84.402905) (xy 54.186996 84.35564) (xy 54.289689 84.287023)
(xy 54.377023 84.199689) (xy 54.44564 84.096996) (xy 54.492905 83.982889) (xy 54.502962 83.932327) (xy 54.530944 83.904345)
(xy 55.90829 82.527) (xy 57.744119 82.527) (xy 57.77 82.529549) (xy 57.795881 82.527) (xy 57.87331 82.519374)
(xy 57.97265 82.489239) (xy 58.064202 82.440304) (xy 58.144448 82.374448) (xy 58.160955 82.354334) (xy 59.000289 81.515)
(xy 60.486928 81.515) (xy 60.499188 81.639482) (xy 60.535498 81.75918) (xy 60.594463 81.869494) (xy 60.673815 81.966185)
(xy 60.770506 82.045537) (xy 60.88082 82.104502) (xy 61.000518 82.140812) (xy 61.125 82.153072) (xy 61.86425 82.15)
(xy 62.023 81.99125) (xy 62.023 81.342) (xy 62.277 81.342) (xy 62.277 81.99125) (xy 62.43575 82.15)
(xy 63.175 82.153072) (xy 63.299482 82.140812) (xy 63.41918 82.104502) (xy 63.529494 82.045537) (xy 63.626185 81.966185)
(xy 63.705537 81.869494) (xy 63.764502 81.75918) (xy 63.800812 81.639482) (xy 63.813072 81.515) (xy 63.81 81.50075)
(xy 63.65125 81.342) (xy 62.277 81.342) (xy 62.023 81.342) (xy 60.64875 81.342) (xy 60.49 81.50075)
(xy 60.486928 81.515) (xy 59.000289 81.515) (xy 60.04329 80.472) (xy 60.667098 80.472) (xy 60.594463 80.560506)
(xy 60.535498 80.67082) (xy 60.499188 80.790518) (xy 60.486928 80.915) (xy 60.49 80.92925) (xy 60.64875 81.088)
(xy 62.023 81.088) (xy 62.023 81.068) (xy 62.277 81.068) (xy 62.277 81.088) (xy 63.65125 81.088)
(xy 63.81 80.92925) (xy 63.813072 80.915) (xy 63.800812 80.790518) (xy 63.764502 80.67082) (xy 63.705537 80.560506)
(xy 63.626185 80.463815) (xy 63.529494 80.384463) (xy 63.480902 80.35849) (xy 63.51357 80.297372) (xy 63.543663 80.198168)
(xy 63.553824 80.095) (xy 63.553824 79.795) (xy 63.543663 79.691832) (xy 63.51357 79.592628) (xy 63.464701 79.501201)
(xy 63.398935 79.421065) (xy 63.318799 79.355299) (xy 63.234051 79.31) (xy 63.318799 79.264701) (xy 63.398935 79.198935)
(xy 63.464701 79.118799) (xy 63.51357 79.027372) (xy 63.543663 78.928168) (xy 63.553824 78.825) (xy 63.553824 78.525)
(xy 63.543663 78.421832) (xy 63.51357 78.322628) (xy 63.464701 78.231201) (xy 63.398935 78.151065) (xy 63.318799 78.085299)
(xy 63.234051 78.04) (xy 63.318799 77.994701) (xy 63.3952 77.932) (xy 63.795272 77.932) (xy 63.850311 77.987039)
(xy 63.953004 78.055656) (xy 64.067111 78.102921) (xy 64.188246 78.127016) (xy 64.311754 78.127016) (xy 64.432889 78.102921)
(xy 64.546996 78.055656) (xy 64.649689 77.987039) (xy 64.737023 77.899705) (xy 64.80564 77.797012) (xy 64.852905 77.682905)
(xy 64.877 77.56177) (xy 64.877 77.438262) (xy 64.852905 77.317127) (xy 64.80564 77.20302) (xy 64.737023 77.100327)
(xy 64.649689 77.012993) (xy 64.546996 76.944376) (xy 64.432889 76.897111) (xy 64.311754 76.873016) (xy 64.188246 76.873016)
(xy 64.169043 76.876836) (xy 64.154984 76.875451) (xy 64.129103 76.878) (xy 63.3952 76.878) (xy 63.318799 76.815299)
(xy 63.234051 76.77) (xy 63.318799 76.724701) (xy 63.398935 76.658935) (xy 63.464701 76.578799) (xy 63.51357 76.487372)
(xy 63.543663 76.388168) (xy 63.553824 76.285) (xy 63.553824 75.985) (xy 63.543663 75.881832) (xy 63.51357 75.782628)
(xy 63.464701 75.691201) (xy 63.398935 75.611065) (xy 63.318799 75.545299) (xy 63.234051 75.5) (xy 63.318799 75.454701)
(xy 63.3952 75.392) (xy 63.7925 75.392) (xy 63.867111 75.422905) (xy 63.988246 75.447) (xy 64.111754 75.447)
(xy 64.232889 75.422905) (xy 64.346996 75.37564) (xy 64.449689 75.307023) (xy 64.537023 75.219689) (xy 64.60564 75.116996)
(xy 64.652905 75.002889) (xy 64.677 74.881754) (xy 64.677 74.758246) (xy 64.652905 74.637111) (xy 64.60564 74.523004)
(xy 64.537023 74.420311) (xy 64.449689 74.332977) (xy 64.346996 74.26436) (xy 64.232889 74.217095) (xy 64.111754 74.193)
(xy 63.988246 74.193) (xy 63.867111 74.217095) (xy 63.753004 74.26436) (xy 63.650311 74.332977) (xy 63.645288 74.338)
(xy 63.3952 74.338) (xy 63.318799 74.275299) (xy 63.234051 74.23) (xy 63.318799 74.184701) (xy 63.398935 74.118935)
(xy 63.464701 74.038799) (xy 63.51357 73.947372) (xy 63.543663 73.848168) (xy 63.553824 73.745) (xy 63.553824 73.445)
(xy 63.543663 73.341832) (xy 63.51357 73.242628) (xy 63.464701 73.151201) (xy 63.463716 73.15) (xy 65.271176 73.15)
(xy 65.271176 74.85) (xy 65.278455 74.923905) (xy 65.300012 74.99497) (xy 65.335019 75.060463) (xy 65.382131 75.117869)
(xy 65.439537 75.164981) (xy 65.50503 75.199988) (xy 65.576095 75.221545) (xy 65.65 75.228824) (xy 66.473001 75.228824)
(xy 66.473 76.694561) (xy 66.45503 76.700012) (xy 66.389537 76.735019) (xy 66.332131 76.782131) (xy 66.285019 76.839537)
(xy 66.250012 76.90503) (xy 66.228455 76.976095) (xy 66.221176 77.05) (xy 66.221176 77.95) (xy 66.228455 78.023905)
(xy 66.250012 78.09497) (xy 66.285019 78.160463) (xy 66.332131 78.217869) (xy 66.389537 78.264981) (xy 66.45503 78.299988)
(xy 66.526095 78.321545) (xy 66.6 78.328824) (xy 67.4 78.328824) (xy 67.473905 78.321545) (xy 67.54497 78.299988)
(xy 67.610463 78.264981) (xy 67.667869 78.217869) (xy 67.714981 78.160463) (xy 67.749988 78.09497) (xy 67.771545 78.023905)
(xy 67.778824 77.95) (xy 67.778824 77.05) (xy 67.771545 76.976095) (xy 67.749988 76.90503) (xy 67.714981 76.839537)
(xy 67.667869 76.782131) (xy 67.610463 76.735019) (xy 67.54497 76.700012) (xy 67.527 76.694561) (xy 67.527 75.182867)
(xy 67.560463 75.164981) (xy 67.617869 75.117869) (xy 67.664981 75.060463) (xy 67.699988 74.99497) (xy 67.721545 74.923905)
(xy 67.728824 74.85) (xy 67.728824 73.15) (xy 67.721545 73.076095) (xy 67.699988 73.00503) (xy 67.664981 72.939537)
(xy 67.617869 72.882131) (xy 67.560463 72.835019) (xy 67.49497 72.800012) (xy 67.423905 72.778455) (xy 67.35 72.771176)
(xy 65.65 72.771176) (xy 65.576095 72.778455) (xy 65.50503 72.800012) (xy 65.439537 72.835019) (xy 65.382131 72.882131)
(xy 65.335019 72.939537) (xy 65.300012 73.00503) (xy 65.278455 73.076095) (xy 65.271176 73.15) (xy 63.463716 73.15)
(xy 63.398935 73.071065) (xy 63.318799 73.005299) (xy 63.234051 72.96) (xy 63.318799 72.914701) (xy 63.398935 72.848935)
(xy 63.464701 72.768799) (xy 63.51357 72.677372) (xy 63.543663 72.578168) (xy 63.553824 72.475) (xy 63.553824 72.175)
(xy 63.543663 72.071832) (xy 63.51357 71.972628) (xy 63.464701 71.881201) (xy 63.398935 71.801065) (xy 63.318799 71.735299)
(xy 63.234051 71.69) (xy 63.318799 71.644701) (xy 63.398935 71.578935) (xy 63.464701 71.498799) (xy 63.51357 71.407372)
(xy 63.543663 71.308168) (xy 63.553824 71.205) (xy 63.553824 70.905) (xy 63.543663 70.801832) (xy 63.51357 70.702628)
(xy 63.480902 70.64151) (xy 63.529494 70.615537) (xy 63.626185 70.536185) (xy 63.705537 70.439494) (xy 63.764502 70.32918)
(xy 63.800812 70.209482) (xy 63.813072 70.085) (xy 63.81 70.07075) (xy 63.65125 69.912) (xy 62.277 69.912)
(xy 62.277 69.932) (xy 62.023 69.932) (xy 62.023 69.912) (xy 60.64875 69.912) (xy 60.49 70.07075)
(xy 60.486928 70.085) (xy 60.499188 70.209482) (xy 60.535498 70.32918) (xy 60.594463 70.439494) (xy 60.673815 70.536185)
(xy 60.770506 70.615537) (xy 60.819098 70.64151) (xy 60.78643 70.702628) (xy 60.756337 70.801832) (xy 60.746176 70.905)
(xy 60.746176 71.205) (xy 60.756337 71.308168) (xy 60.78643 71.407372) (xy 60.835299 71.498799) (xy 60.901065 71.578935)
(xy 60.981201 71.644701) (xy 61.065949 71.69) (xy 60.981201 71.735299) (xy 60.9048 71.798) (xy 60.525074 71.798)
(xy 60.522889 71.797095) (xy 60.401754 71.773) (xy 60.278246 71.773) (xy 60.157111 71.797095) (xy 60.043004 71.84436)
(xy 59.940311 71.912977) (xy 59.852977 72.000311) (xy 59.807 72.069121) (xy 59.807 69.485) (xy 60.486928 69.485)
(xy 60.49 69.49925) (xy 60.64875 69.658) (xy 62.023 69.658) (xy 62.023 69.00875) (xy 62.277 69.00875)
(xy 62.277 69.658) (xy 63.65125 69.658) (xy 63.81 69.49925) (xy 63.813072 69.485) (xy 63.800812 69.360518)
(xy 63.764502 69.24082) (xy 63.705537 69.130506) (xy 63.626185 69.033815) (xy 63.529494 68.954463) (xy 63.41918 68.895498)
(xy 63.299482 68.859188) (xy 63.175 68.846928) (xy 62.43575 68.85) (xy 62.277 69.00875) (xy 62.023 69.00875)
(xy 61.86425 68.85) (xy 61.125 68.846928) (xy 61.000518 68.859188) (xy 60.88082 68.895498) (xy 60.770506 68.954463)
(xy 60.673815 69.033815) (xy 60.594463 69.130506) (xy 60.535498 69.24082) (xy 60.499188 69.360518) (xy 60.486928 69.485)
(xy 59.807 69.485) (xy 59.807 68.529859) (xy 59.83564 68.486996) (xy 59.882905 68.372889) (xy 59.907 68.251754)
(xy 59.907 68.128246) (xy 59.882905 68.007111) (xy 59.83564 67.893004) (xy 59.767023 67.790311) (xy 59.679689 67.702977)
(xy 59.576996 67.63436) (xy 59.462889 67.587095) (xy 59.341754 67.563) (xy 59.218246 67.563) (xy 59.097111 67.587095)
(xy 58.983004 67.63436) (xy 58.880311 67.702977) (xy 58.792977 67.790311) (xy 58.72436 67.893004) (xy 58.677095 68.007111)
(xy 58.653 68.128246) (xy 58.653 68.251754) (xy 58.677095 68.372889) (xy 58.72436 68.486996) (xy 58.753 68.529859)
(xy 58.753 68.569433) (xy 58.753001 68.569443) (xy 58.753001 69.151284) (xy 58.742889 69.147095) (xy 58.621754 69.123)
(xy 58.498246 69.123) (xy 58.377111 69.147095) (xy 58.263004 69.19436) (xy 58.160311 69.262977) (xy 58.072977 69.350311)
(xy 58.00436 69.453004) (xy 57.957095 69.567111) (xy 57.933 69.688246) (xy 57.933 69.811754) (xy 57.957095 69.932889)
(xy 58.00436 70.046996) (xy 58.033 70.089859) (xy 58.033 70.129433) (xy 58.033001 70.129443) (xy 58.033 77.894119)
(xy 58.030451 77.92) (xy 58.033 77.94588) (xy 58.040626 78.023309) (xy 58.070761 78.122649) (xy 58.119696 78.214202)
(xy 58.185552 78.294448) (xy 58.205666 78.310955) (xy 58.924049 79.029339) (xy 58.940552 79.049448) (xy 59.020798 79.115304)
(xy 59.107705 79.161756) (xy 59.11235 79.164239) (xy 59.21169 79.194374) (xy 59.314999 79.204549) (xy 59.34088 79.202)
(xy 60.9048 79.202) (xy 60.981201 79.264701) (xy 61.065949 79.31) (xy 60.981201 79.355299) (xy 60.9048 79.418)
(xy 59.850881 79.418) (xy 59.825 79.415451) (xy 59.799119 79.418) (xy 59.72169 79.425626) (xy 59.62235 79.455761)
(xy 59.530798 79.504696) (xy 59.450552 79.570552) (xy 59.434049 79.590661) (xy 57.978661 81.04605) (xy 57.972905 81.017111)
(xy 57.92564 80.903004) (xy 57.857023 80.800311) (xy 57.769689 80.712977) (xy 57.666996 80.64436) (xy 57.552889 80.597095)
(xy 57.431754 80.573) (xy 57.308246 80.573) (xy 57.187111 80.597095) (xy 57.165825 80.605912) (xy 57.257115 80.514622)
(xy 57.277111 80.522905) (xy 57.398246 80.547) (xy 57.521754 80.547) (xy 57.642889 80.522905) (xy 57.756996 80.47564)
(xy 57.859689 80.407023) (xy 57.947023 80.319689) (xy 58.01564 80.216996) (xy 58.062905 80.102889) (xy 58.087 79.981754)
(xy 58.087 79.858246) (xy 58.062905 79.737111) (xy 58.01564 79.623004) (xy 57.947023 79.520311) (xy 57.859689 79.432977)
(xy 57.756996 79.36436) (xy 57.642889 79.317095) (xy 57.521754 79.293) (xy 57.398246 79.293) (xy 57.277111 79.317095)
(xy 57.163004 79.36436) (xy 57.121707 79.391954) (xy 57.106447 79.390451) (xy 57.080566 79.393) (xy 57.003137 79.400626)
(xy 56.903797 79.430761) (xy 56.812245 79.479696) (xy 56.731999 79.545552) (xy 56.7155 79.565656) (xy 56.248157 80.033)
(xy 56.003001 80.033) (xy 57.697963 78.338038) (xy 57.719974 78.319974) (xy 57.792079 78.232115) (xy 57.845657 78.131876)
(xy 57.865087 78.067824) (xy 57.86564 78.066996) (xy 57.912905 77.952889) (xy 57.937 77.831754) (xy 57.937 77.708246)
(xy 57.912905 77.587111) (xy 57.86564 77.473004) (xy 57.797023 77.370311) (xy 57.709689 77.282977) (xy 57.606996 77.21436)
(xy 57.492889 77.167095) (xy 57.371754 77.143) (xy 57.248246 77.143) (xy 57.127111 77.167095) (xy 57.013004 77.21436)
(xy 56.910311 77.282977) (xy 56.822977 77.370311) (xy 56.75436 77.473004) (xy 56.707095 77.587111) (xy 56.683 77.708246)
(xy 56.683 77.720999) (xy 54.51 79.893999) (xy 54.51 79.817998) (xy 54.351252 79.817998) (xy 54.51 79.65925)
(xy 54.513072 79.645) (xy 54.500812 79.520518) (xy 54.464502 79.40082) (xy 54.405537 79.290506) (xy 54.326185 79.193815)
(xy 54.261553 79.140773) (xy 54.309202 79.115304) (xy 54.389448 79.049448) (xy 54.405955 79.029334) (xy 57.134339 76.300951)
(xy 57.154448 76.284448) (xy 57.220304 76.204202) (xy 57.269239 76.11265) (xy 57.299374 76.01331) (xy 57.307 75.935881)
(xy 57.307 75.935879) (xy 57.309549 75.910001) (xy 57.307 75.884123) (xy 57.307 67.948289) (xy 60.314339 64.940951)
(xy 60.334448 64.924448) (xy 60.400304 64.844202) (xy 60.449239 64.75265) (xy 60.479374 64.65331) (xy 60.47941 64.652948)
(xy 60.541202 64.627353) (xy 60.629436 64.568397) (xy 61.651208 64.568397) (xy 61.728843 64.817472) (xy 61.992883 64.943371)
(xy 62.276411 65.015339) (xy 62.568531 65.030611) (xy 62.858019 64.988599) (xy 63.133747 64.890919) (xy 63.271157 64.817472)
(xy 63.348792 64.568397) (xy 62.5 63.719605) (xy 61.651208 64.568397) (xy 60.629436 64.568397) (xy 60.742167 64.493073)
(xy 60.913073 64.322167) (xy 61.047353 64.121202) (xy 61.092152 64.013049) (xy 61.149081 64.173747) (xy 61.222528 64.311157)
(xy 61.471603 64.388792) (xy 62.320395 63.54) (xy 62.679605 63.54) (xy 63.528397 64.388792) (xy 63.777472 64.311157)
(xy 63.903371 64.047117) (xy 63.975339 63.763589) (xy 63.990611 63.471469) (xy 63.948599 63.181981) (xy 63.850919 62.906253)
(xy 63.777472 62.768843) (xy 63.528397 62.691208) (xy 62.679605 63.54) (xy 62.320395 63.54) (xy 61.471603 62.691208)
(xy 61.222528 62.768843) (xy 61.096629 63.032883) (xy 61.089566 63.060709) (xy 61.047353 62.958798) (xy 60.913073 62.757833)
(xy 60.742167 62.586927) (xy 60.541202 62.452647) (xy 60.317903 62.360153) (xy 60.080849 62.313) (xy 59.839151 62.313)
(xy 59.602097 62.360153) (xy 59.378798 62.452647) (xy 59.177833 62.586927) (xy 59.006927 62.757833) (xy 58.872647 62.958798)
(xy 58.780153 63.182097) (xy 58.733 63.419151) (xy 58.733 63.660849) (xy 58.780153 63.897903) (xy 58.872647 64.121202)
(xy 59.006927 64.322167) (xy 59.177833 64.493073) (xy 59.234065 64.530646) (xy 56.637 67.127711) (xy 56.637 65.068289)
(xy 57.007894 64.697395) (xy 57.062097 64.719847) (xy 57.299151 64.767) (xy 57.540849 64.767) (xy 57.777903 64.719847)
(xy 58.001202 64.627353) (xy 58.202167 64.493073) (xy 58.373073 64.322167) (xy 58.507353 64.121202) (xy 58.599847 63.897903)
(xy 58.647 63.660849) (xy 58.647 63.419151) (xy 58.599847 63.182097) (xy 58.507353 62.958798) (xy 58.373073 62.757833)
(xy 58.202167 62.586927) (xy 58.001202 62.452647) (xy 57.777903 62.360153) (xy 57.540849 62.313) (xy 57.299151 62.313)
(xy 57.062097 62.360153) (xy 56.838798 62.452647) (xy 56.637833 62.586927) (xy 56.466927 62.757833) (xy 56.332647 62.958798)
(xy 56.240153 63.182097) (xy 56.193 63.419151) (xy 56.193 63.660849) (xy 56.240153 63.897903) (xy 56.262605 63.952106)
(xy 55.807 64.407711) (xy 55.807 64.34824) (xy 55.833073 64.322167) (xy 55.967353 64.121202) (xy 56.059847 63.897903)
(xy 56.107 63.660849) (xy 56.107 63.419151) (xy 56.059847 63.182097) (xy 55.967353 62.958798) (xy 55.833073 62.757833)
(xy 55.662167 62.586927) (xy 55.461202 62.452647) (xy 55.237903 62.360153) (xy 55.000849 62.313) (xy 54.759151 62.313)
(xy 54.522097 62.360153) (xy 54.298798 62.452647) (xy 54.097833 62.586927) (xy 53.926927 62.757833) (xy 53.792647 62.958798)
(xy 53.700153 63.182097) (xy 53.653 63.419151) (xy 53.653 63.660849) (xy 53.700153 63.897903) (xy 53.792647 64.121202)
(xy 53.926927 64.322167) (xy 54.097833 64.493073) (xy 54.298798 64.627353) (xy 54.522097 64.719847) (xy 54.753001 64.765777)
(xy 54.753001 67.29771) (xy 52.867 65.411711) (xy 52.867 64.649804) (xy 52.921202 64.627353) (xy 53.122167 64.493073)
(xy 53.293073 64.322167) (xy 53.427353 64.121202) (xy 53.519847 63.897903) (xy 53.567 63.660849) (xy 53.567 63.419151)
(xy 53.519847 63.182097) (xy 53.427353 62.958798) (xy 53.293073 62.757833) (xy 53.122167 62.586927) (xy 52.921202 62.452647)
(xy 52.697903 62.360153) (xy 52.460849 62.313) (xy 52.219151 62.313) (xy 51.982097 62.360153) (xy 51.758798 62.452647)
(xy 51.557833 62.586927) (xy 51.386927 62.757833) (xy 51.252647 62.958798) (xy 51.160153 63.182097) (xy 51.113 63.419151)
(xy 51.113 63.660849) (xy 51.160153 63.897903) (xy 51.252647 64.121202) (xy 51.386927 64.322167) (xy 51.557833 64.493073)
(xy 51.758798 64.627353) (xy 51.813001 64.649805) (xy 51.813001 65.31771) (xy 48.527 62.031711) (xy 48.527 60.879151)
(xy 51.113 60.879151) (xy 51.113 61.120849) (xy 51.160153 61.357903) (xy 51.252647 61.581202) (xy 51.386927 61.782167)
(xy 51.557833 61.953073) (xy 51.758798 62.087353) (xy 51.982097 62.179847) (xy 52.219151 62.227) (xy 52.460849 62.227)
(xy 52.697903 62.179847) (xy 52.921202 62.087353) (xy 53.122167 61.953073) (xy 53.293073 61.782167) (xy 53.427353 61.581202)
(xy 53.519847 61.357903) (xy 53.567 61.120849) (xy 53.567 60.879151) (xy 53.653 60.879151) (xy 53.653 61.120849)
(xy 53.700153 61.357903) (xy 53.792647 61.581202) (xy 53.926927 61.782167) (xy 54.097833 61.953073) (xy 54.298798 62.087353)
(xy 54.522097 62.179847) (xy 54.759151 62.227) (xy 55.000849 62.227) (xy 55.237903 62.179847) (xy 55.461202 62.087353)
(xy 55.662167 61.953073) (xy 55.833073 61.782167) (xy 55.967353 61.581202) (xy 56.059847 61.357903) (xy 56.107 61.120849)
(xy 56.107 60.879151) (xy 56.059847 60.642097) (xy 55.967353 60.418798) (xy 55.833073 60.217833) (xy 55.662167 60.046927)
(xy 55.461202 59.912647) (xy 55.237903 59.820153) (xy 55.000849 59.773) (xy 54.759151 59.773) (xy 54.522097 59.820153)
(xy 54.298798 59.912647) (xy 54.097833 60.046927) (xy 53.926927 60.217833) (xy 53.792647 60.418798) (xy 53.700153 60.642097)
(xy 53.653 60.879151) (xy 53.567 60.879151) (xy 53.519847 60.642097) (xy 53.427353 60.418798) (xy 53.293073 60.217833)
(xy 53.122167 60.046927) (xy 52.921202 59.912647) (xy 52.697903 59.820153) (xy 52.460849 59.773) (xy 52.219151 59.773)
(xy 51.982097 59.820153) (xy 51.758798 59.912647) (xy 51.557833 60.046927) (xy 51.386927 60.217833) (xy 51.252647 60.418798)
(xy 51.160153 60.642097) (xy 51.113 60.879151) (xy 48.527 60.879151) (xy 48.527 55.975) (xy 52.636928 55.975)
(xy 52.649188 56.099482) (xy 52.685498 56.21918) (xy 52.744463 56.329494) (xy 52.823815 56.426185) (xy 52.920506 56.505537)
(xy 53.03082 56.564502) (xy 53.150518 56.600812) (xy 53.275 56.613072) (xy 53.42675 56.61) (xy 53.5855 56.45125)
(xy 53.5855 55.627) (xy 52.79875 55.627) (xy 52.64 55.78575) (xy 52.636928 55.975) (xy 48.527 55.975)
(xy 48.527 55.839859) (xy 48.55564 55.796996) (xy 48.602905 55.682889) (xy 48.627 55.561754) (xy 48.627 55.438246)
(xy 48.602905 55.317111) (xy 48.55564 55.203004) (xy 48.487023 55.100311) (xy 48.411712 55.025) (xy 52.636928 55.025)
(xy 52.64 55.21425) (xy 52.79875 55.373) (xy 53.5855 55.373) (xy 53.5855 54.54875) (xy 53.8395 54.54875)
(xy 53.8395 55.373) (xy 53.8595 55.373) (xy 53.8595 55.627) (xy 53.8395 55.627) (xy 53.8395 56.45125)
(xy 53.99825 56.61) (xy 54.15 56.613072) (xy 54.274482 56.600812) (xy 54.39418 56.564502) (xy 54.504494 56.505537)
(xy 54.601185 56.426185) (xy 54.680537 56.329494) (xy 54.726057 56.244334) (xy 54.736756 56.253115) (xy 54.840068 56.308336)
(xy 54.952169 56.342342) (xy 55.06875 56.353824) (xy 55.396035 56.353824) (xy 56.893001 57.850791) (xy 56.893 59.890196)
(xy 56.838798 59.912647) (xy 56.637833 60.046927) (xy 56.466927 60.217833) (xy 56.332647 60.418798) (xy 56.240153 60.642097)
(xy 56.193 60.879151) (xy 56.193 61.120849) (xy 56.240153 61.357903) (xy 56.332647 61.581202) (xy 56.466927 61.782167)
(xy 56.637833 61.953073) (xy 56.838798 62.087353) (xy 57.062097 62.179847) (xy 57.299151 62.227) (xy 57.540849 62.227)
(xy 57.777903 62.179847) (xy 58.001202 62.087353) (xy 58.202167 61.953073) (xy 58.373073 61.782167) (xy 58.507353 61.581202)
(xy 58.599847 61.357903) (xy 58.647 61.120849) (xy 58.647 60.879151) (xy 58.733 60.879151) (xy 58.733 61.120849)
(xy 58.780153 61.357903) (xy 58.872647 61.581202) (xy 59.006927 61.782167) (xy 59.177833 61.953073) (xy 59.378798 62.087353)
(xy 59.602097 62.179847) (xy 59.839151 62.227) (xy 60.080849 62.227) (xy 60.317903 62.179847) (xy 60.541202 62.087353)
(xy 60.742167 61.953073) (xy 60.913073 61.782167) (xy 61.013112 61.632447) (xy 61.011928 61.85) (xy 61.024188 61.974482)
(xy 61.060498 62.09418) (xy 61.119463 62.204494) (xy 61.198815 62.301185) (xy 61.295506 62.380537) (xy 61.40582 62.439502)
(xy 61.525518 62.475812) (xy 61.65 62.488072) (xy 61.658557 62.488025) (xy 61.651208 62.511603) (xy 62.5 63.360395)
(xy 63.348792 62.511603) (xy 63.341443 62.488025) (xy 63.35 62.488072) (xy 63.474482 62.475812) (xy 63.59418 62.439502)
(xy 63.704494 62.380537) (xy 63.801185 62.301185) (xy 63.880537 62.204494) (xy 63.939502 62.09418) (xy 63.975812 61.974482)
(xy 63.988072 61.85) (xy 63.985 61.28575) (xy 63.82625 61.127) (xy 62.627 61.127) (xy 62.627 61.147)
(xy 62.373 61.147) (xy 62.373 61.127) (xy 62.353 61.127) (xy 62.353 60.873) (xy 62.373 60.873)
(xy 62.373 59.67375) (xy 62.627 59.67375) (xy 62.627 60.873) (xy 63.82625 60.873) (xy 63.985 60.71425)
(xy 63.988072 60.15) (xy 63.975812 60.025518) (xy 63.939502 59.90582) (xy 63.880537 59.795506) (xy 63.801185 59.698815)
(xy 63.704494 59.619463) (xy 63.59418 59.560498) (xy 63.474482 59.524188) (xy 63.35 59.511928) (xy 62.78575 59.515)
(xy 62.627 59.67375) (xy 62.373 59.67375) (xy 62.21425 59.515) (xy 61.65 59.511928) (xy 61.525518 59.524188)
(xy 61.40582 59.560498) (xy 61.295506 59.619463) (xy 61.198815 59.698815) (xy 61.119463 59.795506) (xy 61.060498 59.90582)
(xy 61.024188 60.025518) (xy 61.011928 60.15) (xy 61.013112 60.367553) (xy 60.913073 60.217833) (xy 60.742167 60.046927)
(xy 60.693208 60.014214) (xy 61.530422 59.177) (xy 64.350964 59.177) (xy 68.298964 63.125) (xy 68.2948 63.129164)
(xy 68.268975 63.150358) (xy 68.24778 63.176184) (xy 68.247777 63.176187) (xy 68.184373 63.253445) (xy 68.121509 63.371056)
(xy 68.082797 63.498671) (xy 68.069727 63.631385) (xy 68.073002 63.66464) (xy 68.073001 68.929576) (xy 66.744902 70.257676)
(xy 66.620849 70.233) (xy 66.379151 70.233) (xy 66.142097 70.280153) (xy 65.918798 70.372647) (xy 65.717833 70.506927)
(xy 65.546927 70.677833) (xy 65.412647 70.878798) (xy 65.320153 71.102097) (xy 65.273 71.339151) (xy 65.273 71.580849)
(xy 65.320153 71.817903) (xy 65.412647 72.041202) (xy 65.546927 72.242167) (xy 65.717833 72.413073) (xy 65.918798 72.547353)
(xy 66.142097 72.639847) (xy 66.379151 72.687) (xy 66.620849 72.687) (xy 66.857903 72.639847) (xy 67.081202 72.547353)
(xy 67.282167 72.413073) (xy 67.453073 72.242167) (xy 67.587353 72.041202) (xy 67.679847 71.817903) (xy 67.727 71.580849)
(xy 67.727 71.339151) (xy 67.702324 71.215098) (xy 69.205207 69.712216) (xy 69.231027 69.691026) (xy 69.252219 69.665204)
(xy 69.252225 69.665198) (xy 69.315629 69.58794) (xy 69.378493 69.470329) (xy 69.417205 69.342714) (xy 69.421413 69.299988)
(xy 69.427001 69.243251) (xy 69.427001 69.243244) (xy 69.430275 69.209999) (xy 69.427001 69.176754) (xy 69.427001 63.911807)
(xy 69.536809 63.802) (xy 72.28869 63.802) (xy 72.326693 63.848307) (xy 72.420089 63.924955) (xy 72.526643 63.981909)
(xy 72.58628 64) (xy 72.526643 64.018091) (xy 72.420089 64.075045) (xy 72.326693 64.151693) (xy 72.250045 64.245089)
(xy 72.193091 64.351643) (xy 72.158018 64.467261) (xy 72.146176 64.5875) (xy 72.146176 65.1625) (xy 72.158018 65.282739)
(xy 72.193091 65.398357) (xy 72.250045 65.504911) (xy 72.323001 65.593808) (xy 72.323001 66.019576) (xy 71.1448 67.197778)
(xy 71.118973 67.218974) (xy 71.097778 67.2448) (xy 71.097776 67.244802) (xy 71.041554 67.313309) (xy 71.034372 67.32206)
(xy 70.971508 67.439671) (xy 70.932796 67.567286) (xy 70.923 67.666749) (xy 70.923 67.666755) (xy 70.919726 67.7)
(xy 70.923 67.733245) (xy 70.923 68.326839) (xy 70.875644 68.352152) (xy 70.780354 68.430354) (xy 70.702152 68.525644)
(xy 70.644042 68.634359) (xy 70.608259 68.752323) (xy 70.601298 68.823) (xy 70.533252 68.823) (xy 70.5 68.819725)
(xy 70.466748 68.823) (xy 70.367285 68.832796) (xy 70.23967 68.871508) (xy 70.122059 68.934372) (xy 70.018973 69.018973)
(xy 69.997774 69.044804) (xy 69.9948 69.047778) (xy 69.968974 69.068973) (xy 69.947779 69.094799) (xy 69.947776 69.094802)
(xy 69.884372 69.17206) (xy 69.821508 69.289671) (xy 69.782796 69.417286) (xy 69.769726 69.55) (xy 69.773001 69.583254)
(xy 69.773 71.721176) (xy 69.7 71.721176) (xy 69.626095 71.728455) (xy 69.55503 71.750012) (xy 69.489537 71.785019)
(xy 69.432131 71.832131) (xy 69.385019 71.889537) (xy 69.350012 71.95503) (xy 69.328455 72.026095) (xy 69.321176 72.1)
(xy 69.321176 74.1) (xy 69.328455 74.173905) (xy 69.350012 74.24497) (xy 69.385019 74.310463) (xy 69.432131 74.367869)
(xy 69.489537 74.414981) (xy 69.55503 74.449988) (xy 69.626095 74.471545) (xy 69.7 74.478824) (xy 71.2 74.478824)
(xy 71.273905 74.471545) (xy 71.34497 74.449988) (xy 71.410463 74.414981) (xy 71.467869 74.367869) (xy 71.514981 74.310463)
(xy 71.549988 74.24497) (xy 71.571545 74.173905) (xy 71.578824 74.1) (xy 71.578824 72.1) (xy 71.571545 72.026095)
(xy 71.549988 71.95503) (xy 71.514981 71.889537) (xy 71.467869 71.832131) (xy 71.410463 71.785019) (xy 71.34497 71.750012)
(xy 71.273905 71.728455) (xy 71.2 71.721176) (xy 71.127 71.721176) (xy 71.127 70.744172) (xy 71.225 70.753824)
(xy 71.975 70.753824) (xy 72.097677 70.741741) (xy 72.215641 70.705958) (xy 72.324356 70.647848) (xy 72.419646 70.569646)
(xy 72.497848 70.474356) (xy 72.550955 70.375) (xy 73.136928 70.375) (xy 73.149188 70.499482) (xy 73.185498 70.61918)
(xy 73.244463 70.729494) (xy 73.323815 70.826185) (xy 73.420506 70.905537) (xy 73.53082 70.964502) (xy 73.650518 71.000812)
(xy 73.775 71.013072) (xy 74.11425 71.01) (xy 74.273 70.85125) (xy 74.273 69.627) (xy 74.527 69.627)
(xy 74.527 70.85125) (xy 74.68575 71.01) (xy 75.025 71.013072) (xy 75.149482 71.000812) (xy 75.26918 70.964502)
(xy 75.379494 70.905537) (xy 75.476185 70.826185) (xy 75.555537 70.729494) (xy 75.614502 70.61918) (xy 75.650812 70.499482)
(xy 75.663072 70.375) (xy 75.66 69.78575) (xy 75.50125 69.627) (xy 74.527 69.627) (xy 74.273 69.627)
(xy 73.29875 69.627) (xy 73.14 69.78575) (xy 73.136928 70.375) (xy 72.550955 70.375) (xy 72.555958 70.365641)
(xy 72.591741 70.247677) (xy 72.603824 70.125) (xy 72.603824 68.875) (xy 72.591741 68.752323) (xy 72.555958 68.634359)
(xy 72.550956 68.625) (xy 73.136928 68.625) (xy 73.14 69.21425) (xy 73.29875 69.373) (xy 74.273 69.373)
(xy 74.273 68.14875) (xy 74.527 68.14875) (xy 74.527 69.373) (xy 75.50125 69.373) (xy 75.66 69.21425)
(xy 75.663072 68.625) (xy 75.650812 68.500518) (xy 75.614502 68.38082) (xy 75.555537 68.270506) (xy 75.476185 68.173815)
(xy 75.379494 68.094463) (xy 75.26918 68.035498) (xy 75.149482 67.999188) (xy 75.025 67.986928) (xy 74.68575 67.99)
(xy 74.527 68.14875) (xy 74.273 68.14875) (xy 74.11425 67.99) (xy 73.775 67.986928) (xy 73.650518 67.999188)
(xy 73.53082 68.035498) (xy 73.420506 68.094463) (xy 73.323815 68.173815) (xy 73.244463 68.270506) (xy 73.185498 68.38082)
(xy 73.149188 68.500518) (xy 73.136928 68.625) (xy 72.550956 68.625) (xy 72.497848 68.525644) (xy 72.419646 68.430354)
(xy 72.324356 68.352152) (xy 72.277 68.326839) (xy 72.277 67.980422) (xy 73.455201 66.802222) (xy 73.481027 66.781027)
(xy 73.512327 66.742889) (xy 73.565628 66.677941) (xy 73.628492 66.56033) (xy 73.667204 66.432715) (xy 73.667767 66.427)
(xy 73.677 66.333252) (xy 73.677 66.333245) (xy 73.680274 66.3) (xy 73.677 66.266755) (xy 73.677 65.593807)
(xy 73.749955 65.504911) (xy 73.806909 65.398357) (xy 73.841982 65.282739) (xy 73.853824 65.1625) (xy 73.853824 64.5875)
(xy 73.841982 64.467261) (xy 73.806909 64.351643) (xy 73.749955 64.245089) (xy 73.673307 64.151693) (xy 73.579911 64.075045)
(xy 73.473357 64.018091) (xy 73.420313 64.002) (xy 77.768079 64.002) (xy 77.896922 63.98931) (xy 78.062237 63.939162)
(xy 78.214592 63.857727) (xy 78.348133 63.748133) (xy 78.457727 63.614592) (xy 78.539162 63.462237) (xy 78.58931 63.296922)
(xy 78.606243 63.125) (xy 78.58931 62.953078) (xy 78.539162 62.787763) (xy 78.457727 62.635408) (xy 78.348133 62.501867)
(xy 78.214592 62.392273) (xy 78.062237 62.310838) (xy 77.896922 62.26069) (xy 77.768079 62.248) (xy 73.407127 62.248)
(xy 73.357739 62.233018) (xy 73.2375 62.221176) (xy 72.7625 62.221176) (xy 72.642261 62.233018) (xy 72.526643 62.268091)
(xy 72.420089 62.325045) (xy 72.326693 62.401693) (xy 72.28869 62.448) (xy 69.536809 62.448) (xy 65.133612 58.044804)
(xy 65.112413 58.018973) (xy 65.009327 57.934372) (xy 64.891716 57.871508) (xy 64.764101 57.832796) (xy 64.664638 57.823)
(xy 64.664631 57.823) (xy 64.631386 57.819726) (xy 64.598141 57.823) (xy 61.283241 57.823) (xy 61.249999 57.819726)
(xy 61.216757 57.823) (xy 61.216748 57.823) (xy 61.117285 57.832796) (xy 60.98967 57.871508) (xy 60.872059 57.934372)
(xy 60.768973 58.018973) (xy 60.747774 58.044804) (xy 59.5048 59.287778) (xy 59.478973 59.308974) (xy 59.394372 59.41206)
(xy 59.331508 59.529671) (xy 59.292796 59.657286) (xy 59.283 59.756749) (xy 59.283 59.756755) (xy 59.279726 59.79)
(xy 59.283 59.823245) (xy 59.283 59.976657) (xy 59.177833 60.046927) (xy 59.006927 60.217833) (xy 58.872647 60.418798)
(xy 58.780153 60.642097) (xy 58.733 60.879151) (xy 58.647 60.879151) (xy 58.599847 60.642097) (xy 58.507353 60.418798)
(xy 58.373073 60.217833) (xy 58.202167 60.046927) (xy 58.001202 59.912647) (xy 57.947 59.890196) (xy 57.947 57.658377)
(xy 57.949549 57.632499) (xy 57.944189 57.578078) (xy 57.939374 57.52919) (xy 57.909239 57.42985) (xy 57.860304 57.338298)
(xy 57.794448 57.258052) (xy 57.774339 57.241549) (xy 56.103824 55.571035) (xy 56.103824 55.24375) (xy 56.092342 55.127169)
(xy 56.058336 55.015068) (xy 56.003115 54.911756) (xy 55.928799 54.821201) (xy 55.838244 54.746885) (xy 55.734932 54.691664)
(xy 55.622831 54.657658) (xy 55.50625 54.646176) (xy 55.06875 54.646176) (xy 54.952169 54.657658) (xy 54.840068 54.691664)
(xy 54.736756 54.746885) (xy 54.726057 54.755666) (xy 54.680537 54.670506) (xy 54.601185 54.573815) (xy 54.504494 54.494463)
(xy 54.39418 54.435498) (xy 54.274482 54.399188) (xy 54.15 54.386928) (xy 53.99825 54.39) (xy 53.8395 54.54875)
(xy 53.5855 54.54875) (xy 53.42675 54.39) (xy 53.275 54.386928) (xy 53.150518 54.399188) (xy 53.03082 54.435498)
(xy 52.920506 54.494463) (xy 52.823815 54.573815) (xy 52.744463 54.670506) (xy 52.685498 54.78082) (xy 52.649188 54.900518)
(xy 52.636928 55.025) (xy 48.411712 55.025) (xy 48.399689 55.012977) (xy 48.296996 54.94436) (xy 48.182889 54.897095)
(xy 48.061754 54.873) (xy 47.938246 54.873) (xy 47.817111 54.897095) (xy 47.703004 54.94436) (xy 47.600311 55.012977)
(xy 47.512977 55.100311) (xy 47.44436 55.203004) (xy 47.397095 55.317111) (xy 47.373 55.438246) (xy 47.373 55.561754)
(xy 47.397095 55.682889) (xy 47.44436 55.796996) (xy 47.473 55.839859) (xy 47.473001 62.224109) (xy 47.470451 62.25)
(xy 47.480626 62.353309) (xy 47.510761 62.452649) (xy 47.559696 62.544201) (xy 47.559697 62.544202) (xy 47.625553 62.624448)
(xy 47.645662 62.640951) (xy 52.597038 67.592329) (xy 52.607095 67.642889) (xy 52.65436 67.756996) (xy 52.722977 67.859689)
(xy 52.810311 67.947023) (xy 52.913004 68.01564) (xy 53.027111 68.062905) (xy 53.148246 68.087) (xy 53.271754 68.087)
(xy 53.392889 68.062905) (xy 53.506996 68.01564) (xy 53.609689 67.947023) (xy 53.697023 67.859689) (xy 53.748042 67.783333)
(xy 54.003 68.038291) (xy 54.003 68.860255) (xy 53.999482 68.859188) (xy 53.875 68.846928) (xy 53.13575 68.85)
(xy 52.977 69.00875) (xy 52.977 69.658) (xy 52.997 69.658) (xy 52.997 69.912) (xy 52.977 69.912)
(xy 52.977 69.932) (xy 52.723 69.932) (xy 52.723 69.912) (xy 51.34875 69.912) (xy 51.19 70.07075)
(xy 51.186928 70.085) (xy 51.199188 70.209482) (xy 51.235498 70.32918) (xy 51.294463 70.439494) (xy 51.373815 70.536185)
(xy 51.470506 70.615537) (xy 51.519098 70.64151) (xy 51.48643 70.702628) (xy 51.456337 70.801832) (xy 51.446176 70.905)
(xy 51.446176 71.205) (xy 51.456337 71.308168) (xy 51.48643 71.407372) (xy 51.519098 71.46849) (xy 51.470506 71.494463)
(xy 51.373815 71.573815) (xy 51.294463 71.670506) (xy 51.235498 71.78082) (xy 51.199188 71.900518) (xy 51.186928 72.025)
(xy 51.19 72.03925) (xy 51.34875 72.198) (xy 52.723 72.198) (xy 52.723 72.178) (xy 52.977 72.178)
(xy 52.977 72.198) (xy 54.35125 72.198) (xy 54.51 72.03925) (xy 54.513072 72.025) (xy 54.500812 71.900518)
(xy 54.464502 71.78082) (xy 54.405537 71.670506) (xy 54.332902 71.582) (xy 54.379119 71.582) (xy 54.405 71.584549)
(xy 54.430881 71.582) (xy 54.50831 71.574374) (xy 54.60765 71.544239) (xy 54.699202 71.495304) (xy 54.753 71.451153)
(xy 54.753 73.068) (xy 54.332902 73.068) (xy 54.405537 72.979494) (xy 54.464502 72.86918) (xy 54.500812 72.749482)
(xy 54.513072 72.625) (xy 54.51 72.61075) (xy 54.35125 72.452) (xy 52.977 72.452) (xy 52.977 72.472)
(xy 52.723 72.472) (xy 52.723 72.452) (xy 51.34875 72.452) (xy 51.19 72.61075) (xy 51.186928 72.625)
(xy 51.199188 72.749482) (xy 51.235498 72.86918) (xy 51.294463 72.979494) (xy 51.373815 73.076185) (xy 51.470506 73.155537)
(xy 51.519098 73.18151) (xy 51.48643 73.242628) (xy 51.456337 73.341832) (xy 51.446176 73.445) (xy 51.446176 73.745)
(xy 51.456337 73.848168) (xy 51.48643 73.947372) (xy 51.535299 74.038799) (xy 51.601065 74.118935) (xy 51.681201 74.184701)
(xy 51.765949 74.23) (xy 51.681201 74.275299) (xy 51.6048 74.338) (xy 49.24088 74.338) (xy 49.214999 74.335451)
(xy 49.157999 74.341065) (xy 49.11169 74.345626) (xy 49.01235 74.375761) (xy 48.920798 74.424696) (xy 48.840552 74.490552)
(xy 48.824049 74.510661) (xy 47.895662 75.439049) (xy 47.875553 75.455552) (xy 47.836146 75.50357) (xy 47.809696 75.535799)
(xy 47.760761 75.627351) (xy 47.730626 75.726691) (xy 47.720451 75.83) (xy 47.723001 75.855891) (xy 47.723 82.124119)
(xy 47.720451 82.15) (xy 47.723 82.17588) (xy 47.730626 82.253309) (xy 47.760761 82.352649) (xy 47.809696 82.444202)
(xy 47.875552 82.524448) (xy 47.895666 82.540955) (xy 50.473001 85.118291) (xy 50.473001 85.146176) (xy 50.425 85.146176)
(xy 50.336463 85.154896) (xy 50.251329 85.180721) (xy 50.25 85.181431) (xy 50.248671 85.180721) (xy 50.163537 85.154896)
(xy 50.075 85.146176) (xy 49.925 85.146176) (xy 49.836463 85.154896) (xy 49.751329 85.180721) (xy 49.75 85.181431)
(xy 49.748671 85.180721) (xy 49.663537 85.154896) (xy 49.575 85.146176) (xy 49.425 85.146176) (xy 49.336463 85.154896)
(xy 49.251329 85.180721) (xy 49.25 85.181431) (xy 49.248671 85.180721) (xy 49.163537 85.154896) (xy 49.075 85.146176)
(xy 48.925 85.146176) (xy 48.836463 85.154896) (xy 48.751329 85.180721) (xy 48.75 85.181431) (xy 48.748671 85.180721)
(xy 48.663537 85.154896) (xy 48.575 85.146176) (xy 48.425 85.146176) (xy 48.336463 85.154896) (xy 48.251329 85.180721)
(xy 48.25 85.181431) (xy 48.248671 85.180721) (xy 48.163537 85.154896) (xy 48.075 85.146176) (xy 47.925 85.146176)
(xy 47.836463 85.154896) (xy 47.751329 85.180721) (xy 47.75 85.181431) (xy 47.748671 85.180721) (xy 47.663537 85.154896)
(xy 47.575 85.146176) (xy 47.527 85.146176) (xy 47.527 75.76829) (xy 47.564338 75.730952) (xy 47.584448 75.714448)
(xy 47.650304 75.634202) (xy 47.699239 75.54265) (xy 47.729374 75.44331) (xy 47.737 75.365881) (xy 47.739549 75.34)
(xy 47.737 75.314119) (xy 47.737 69.485) (xy 51.186928 69.485) (xy 51.19 69.49925) (xy 51.34875 69.658)
(xy 52.723 69.658) (xy 52.723 69.00875) (xy 52.56425 68.85) (xy 51.825 68.846928) (xy 51.700518 68.859188)
(xy 51.58082 68.895498) (xy 51.470506 68.954463) (xy 51.373815 69.033815) (xy 51.294463 69.130506) (xy 51.235498 69.24082)
(xy 51.199188 69.360518) (xy 51.186928 69.485) (xy 47.737 69.485) (xy 47.737 66.205877) (xy 47.739549 66.179999)
(xy 47.736639 66.150451) (xy 47.729374 66.07669) (xy 47.699239 65.97735) (xy 47.650304 65.885798) (xy 47.584448 65.805552)
(xy 47.564339 65.789049) (xy 44.780955 63.005666) (xy 44.764448 62.985552) (xy 44.684202 62.919696) (xy 44.59265 62.870761)
(xy 44.49331 62.840626) (xy 44.415881 62.833) (xy 44.39 62.830451) (xy 44.364119 62.833) (xy 39.887214 62.833)
(xy 39.887 62.817734) (xy 39.887 62.795436) (xy 39.886635 62.79173) (xy 39.886583 62.788026) (xy 39.884098 62.765971)
(xy 39.879374 62.718007) (xy 39.878292 62.714439) (xy 39.878232 62.713908) (xy 39.876827 62.680534) (xy 39.866314 62.637279)
(xy 39.857018 62.593747) (xy 39.843803 62.563068) (xy 39.833818 62.534535) (xy 39.82502 62.502302) (xy 39.805138 62.462457)
(xy 39.786396 62.4221) (xy 39.766683 62.395128) (xy 39.750599 62.36953) (xy 39.734852 62.34007) (xy 39.706616 62.305664)
(xy 39.679349 62.270471) (xy 39.654128 62.248561) (xy 39.632756 62.227189) (xy 39.610846 62.201968) (xy 39.575662 62.174708)
(xy 39.541247 62.146464) (xy 39.51178 62.130714) (xy 39.486189 62.114634) (xy 39.459217 62.094921) (xy 39.41886 62.076179)
(xy 39.379015 62.056297) (xy 39.346779 62.047498) (xy 39.318254 62.037516) (xy 39.28757 62.024299) (xy 39.244023 62.015)
(xy 39.200783 62.00449) (xy 39.167408 62.003085) (xy 39.137359 61.999699) (xy 39.104506 61.993642) (xy 39.06 61.994267)
(xy 39.015495 61.993642) (xy 38.982638 61.9997) (xy 38.952593 62.003085) (xy 38.919216 62.00449) (xy 38.875957 62.015004)
(xy 38.832429 62.024299) (xy 38.801746 62.037516) (xy 38.773217 62.047499) (xy 38.740984 62.056297) (xy 38.701139 62.076179)
(xy 38.660782 62.094921) (xy 38.63381 62.114634) (xy 38.608212 62.130718) (xy 38.578752 62.146465) (xy 38.544346 62.174701)
(xy 38.509153 62.201968) (xy 38.487243 62.227189) (xy 38.465871 62.248561) (xy 38.44065 62.270471) (xy 38.41339 62.305655)
(xy 38.385146 62.34007) (xy 38.369396 62.369537) (xy 38.353316 62.395128) (xy 38.333603 62.4221) (xy 38.314861 62.462457)
(xy 38.294979 62.502302) (xy 38.28618 62.534538) (xy 38.276197 62.563068) (xy 38.262979 62.593754) (xy 38.253683 62.637288)
(xy 38.243172 62.680534) (xy 38.241767 62.713913) (xy 38.241707 62.714448) (xy 38.240627 62.718007) (xy 38.235911 62.765887)
(xy 38.233416 62.788035) (xy 38.233364 62.791751) (xy 38.233001 62.795436) (xy 38.233001 62.817656) (xy 38.232326 62.86583)
(xy 38.233001 62.869491) (xy 38.233001 62.921428) (xy 38.21886 62.914861) (xy 38.179015 62.894979) (xy 38.146779 62.88618)
(xy 38.118249 62.876197) (xy 38.087563 62.862979) (xy 38.044029 62.853683) (xy 38.000783 62.843172) (xy 37.967404 62.841767)
(xy 37.966874 62.841707) (xy 37.96331 62.840626) (xy 37.91536 62.835903) (xy 37.893282 62.833416) (xy 37.889578 62.833364)
(xy 37.885881 62.833) (xy 37.863591 62.833) (xy 37.815487 62.832326) (xy 37.811831 62.833) (xy 35.403377 62.833)
(xy 35.377499 62.830451) (xy 35.351621 62.833) (xy 35.351619 62.833) (xy 35.27419 62.840626) (xy 35.17485 62.870761)
(xy 35.083298 62.919696) (xy 35.003052 62.985552) (xy 34.986549 63.005661) (xy 32.614883 65.377328) (xy 32.602905 65.317111)
(xy 32.55564 65.203004) (xy 32.487023 65.100311) (xy 32.399689 65.012977) (xy 32.296996 64.94436) (xy 32.182889 64.897095)
(xy 32.061754 64.873) (xy 31.938246 64.873) (xy 31.817111 64.897095) (xy 31.703004 64.94436) (xy 31.660141 64.973)
(xy 31.27588 64.973) (xy 31.249999 64.970451) (xy 31.14669 64.980626) (xy 31.04735 65.010761) (xy 30.955798 65.059696)
(xy 30.875552 65.125552) (xy 30.859049 65.145661) (xy 29.831713 66.172998) (xy 29.676252 66.172998) (xy 29.835 66.01425)
(xy 29.838072 65.7) (xy 29.825812 65.575518) (xy 29.789502 65.45582) (xy 29.730537 65.345506) (xy 29.651185 65.248815)
(xy 29.554494 65.169463) (xy 29.44418 65.110498) (xy 29.324482 65.074188) (xy 29.2 65.061928) (xy 28.78575 65.065)
(xy 28.627 65.22375) (xy 28.627 66.173) (xy 28.647 66.173) (xy 28.647 66.427) (xy 28.627 66.427)
(xy 28.627 66.447) (xy 28.373 66.447) (xy 28.373 66.427) (xy 27.32375 66.427) (xy 27.165 66.58575)
(xy 27.161928 66.9) (xy 27.174188 67.024482) (xy 27.210498 67.14418) (xy 27.269463 67.254494) (xy 27.348815 67.351185)
(xy 27.445506 67.430537) (xy 27.55582 67.489502) (xy 27.675518 67.525812) (xy 27.8 67.538072) (xy 27.821176 67.537915)
(xy 27.821176 67.85) (xy 27.828455 67.923905) (xy 27.850012 67.99497) (xy 27.879426 68.05) (xy 27.850012 68.10503)
(xy 27.828455 68.176095) (xy 27.821176 68.25) (xy 27.821176 68.95) (xy 27.828455 69.023905) (xy 27.850012 69.09497)
(xy 27.879426 69.15) (xy 27.867133 69.173) (xy 26.435637 69.173) (xy 26.367023 69.070311) (xy 26.279689 68.982977)
(xy 26.176996 68.91436) (xy 26.062889 68.867095) (xy 25.941754 68.843) (xy 25.818246 68.843) (xy 25.697111 68.867095)
(xy 25.583004 68.91436) (xy 25.480311 68.982977) (xy 25.392977 69.070311) (xy 25.32436 69.173004) (xy 25.277095 69.287111)
(xy 25.253 69.408246) (xy 25.253 69.531754) (xy 25.277095 69.652889) (xy 25.32436 69.766996) (xy 25.392977 69.869689)
(xy 25.480311 69.957023) (xy 25.583004 70.02564) (xy 25.697111 70.072905) (xy 25.745368 70.082504) (xy 25.815798 70.140304)
(xy 25.89156 70.180799) (xy 25.90735 70.189239) (xy 26.00669 70.219374) (xy 26.109999 70.229549) (xy 26.13588 70.227)
(xy 27.604073 70.227) (xy 27.574188 70.325518) (xy 27.561928 70.45) (xy 27.565 70.51425) (xy 27.72375 70.673)
(xy 28.873 70.673) (xy 28.873 70.653) (xy 29.127 70.653) (xy 29.127 70.673) (xy 29.147 70.673)
(xy 29.147 70.927) (xy 29.127 70.927) (xy 29.127 70.947) (xy 28.873 70.947) (xy 28.873 70.927)
(xy 27.72375 70.927) (xy 27.565 71.08575) (xy 27.561928 71.15) (xy 27.574188 71.274482) (xy 27.61014 71.393)
(xy 26.339859 71.393) (xy 26.296996 71.36436) (xy 26.182889 71.317095) (xy 26.061754 71.293) (xy 25.938246 71.293)
(xy 25.817111 71.317095) (xy 25.703004 71.36436) (xy 25.600311 71.432977) (xy 25.512977 71.520311) (xy 25.44436 71.623004)
(xy 25.397095 71.737111) (xy 25.373 71.858246) (xy 25.373 71.981754) (xy 25.397095 72.102889) (xy 25.44436 72.216996)
(xy 25.512977 72.319689) (xy 25.516288 72.323) (xy 21.877 72.323) (xy 21.877 68.363265) (xy 24.540265 65.7)
(xy 27.161928 65.7) (xy 27.165 66.01425) (xy 27.32375 66.173) (xy 28.373 66.173) (xy 28.373 65.22375)
(xy 28.21425 65.065) (xy 27.8 65.061928) (xy 27.675518 65.074188) (xy 27.55582 65.110498) (xy 27.445506 65.169463)
(xy 27.348815 65.248815) (xy 27.269463 65.345506) (xy 27.210498 65.45582) (xy 27.174188 65.575518) (xy 27.161928 65.7)
(xy 24.540265 65.7) (xy 31.371663 58.868603) (xy 31.456921 58.877) (xy 31.45693 58.877) (xy 31.499999 58.881242)
(xy 31.543069 58.877) (xy 35.765202 58.877) (xy 35.777152 58.899356) (xy 35.855354 58.994646) (xy 35.950644 59.072848)
(xy 36.059359 59.130958) (xy 36.177323 59.166741) (xy 36.3 59.178824) (xy 38.575 59.178824) (xy 38.697677 59.166741)
(xy 38.815641 59.130958) (xy 38.924356 59.072848) (xy 39.019646 58.994646) (xy 39.097848 58.899356) (xy 39.150955 58.8)
(xy 39.536928 58.8) (xy 39.549188 58.924482) (xy 39.585498 59.04418) (xy 39.644463 59.154494) (xy 39.723815 59.251185)
(xy 39.820506 59.330537) (xy 39.93082 59.389502) (xy 40.050518 59.425812) (xy 40.175 59.438072) (xy 41.27675 59.435)
(xy 41.4355 59.27625) (xy 41.4355 58.127) (xy 41.6895 58.127) (xy 41.6895 59.27625) (xy 41.84825 59.435)
(xy 42.95 59.438072) (xy 43.074482 59.425812) (xy 43.19418 59.389502) (xy 43.304494 59.330537) (xy 43.401185 59.251185)
(xy 43.480537 59.154494) (xy 43.539502 59.04418) (xy 43.575812 58.924482) (xy 43.588072 58.8) (xy 43.585 58.28575)
(xy 43.42625 58.127) (xy 41.6895 58.127) (xy 41.4355 58.127) (xy 39.69875 58.127) (xy 39.54 58.28575)
(xy 39.536928 58.8) (xy 39.150955 58.8) (xy 39.155958 58.790641) (xy 39.191741 58.672677) (xy 39.203824 58.55)
(xy 39.203824 57.45) (xy 39.191741 57.327323) (xy 39.155958 57.209359) (xy 39.150956 57.2) (xy 39.536928 57.2)
(xy 39.54 57.71425) (xy 39.69875 57.873) (xy 41.4355 57.873) (xy 41.4355 56.72375) (xy 41.6895 56.72375)
(xy 41.6895 57.873) (xy 43.42625 57.873) (xy 43.585 57.71425) (xy 43.588072 57.2) (xy 43.575812 57.075518)
(xy 43.539502 56.95582) (xy 43.480537 56.845506) (xy 43.401185 56.748815) (xy 43.304494 56.669463) (xy 43.19418 56.610498)
(xy 43.074482 56.574188) (xy 42.95 56.561928) (xy 41.84825 56.565) (xy 41.6895 56.72375) (xy 41.4355 56.72375)
(xy 41.27675 56.565) (xy 40.175 56.561928) (xy 40.050518 56.574188) (xy 39.93082 56.610498) (xy 39.820506 56.669463)
(xy 39.723815 56.748815) (xy 39.644463 56.845506) (xy 39.585498 56.95582) (xy 39.549188 57.075518) (xy 39.536928 57.2)
(xy 39.150956 57.2) (xy 39.097848 57.100644) (xy 39.019646 57.005354) (xy 38.924356 56.927152) (xy 38.815641 56.869042)
(xy 38.697677 56.833259) (xy 38.575 56.821176) (xy 36.3 56.821176) (xy 36.177323 56.833259) (xy 36.059359 56.869042)
(xy 35.950644 56.927152) (xy 35.855354 57.005354) (xy 35.777152 57.100644) (xy 35.765202 57.123) (xy 33.117265 57.123)
(xy 35.589675 54.650591) (xy 35.623133 54.623133) (xy 35.684178 54.54875) (xy 35.732726 54.489593) (xy 35.732728 54.489591)
(xy 35.814162 54.337237) (xy 35.826262 54.29735) (xy 35.86431 54.171923) (xy 35.878404 54.028824) (xy 37.85 54.028824)
(xy 37.923905 54.021545) (xy 37.99497 53.999988) (xy 38.060463 53.964981) (xy 38.117869 53.917869) (xy 38.164981 53.860463)
(xy 38.199988 53.79497) (xy 38.221545 53.723905) (xy 38.228824 53.65) (xy 38.228824 53.63) (xy 39.211928 53.63)
(xy 39.224188 53.754482) (xy 39.260498 53.87418) (xy 39.319463 53.984494) (xy 39.398815 54.081185) (xy 39.495506 54.160537)
(xy 39.60582 54.219502) (xy 39.725518 54.255812) (xy 39.85 54.268072) (xy 40.66425 54.265) (xy 40.823 54.10625)
(xy 40.823 53.157) (xy 41.077 53.157) (xy 41.077 54.10625) (xy 41.23575 54.265) (xy 42.05 54.268072)
(xy 42.174482 54.255812) (xy 42.29418 54.219502) (xy 42.404494 54.160537) (xy 42.501185 54.081185) (xy 42.580537 53.984494)
(xy 42.639502 53.87418) (xy 42.675812 53.754482) (xy 42.688072 53.63) (xy 42.685 53.31575) (xy 42.52625 53.157)
(xy 41.077 53.157) (xy 40.823 53.157) (xy 39.37375 53.157) (xy 39.215 53.31575) (xy 39.211928 53.63)
(xy 38.228824 53.63) (xy 38.228824 52.43) (xy 39.211928 52.43) (xy 39.215 52.74425) (xy 39.37375 52.903)
(xy 40.823 52.903) (xy 40.823 51.95375) (xy 41.077 51.95375) (xy 41.077 52.903) (xy 42.52625 52.903)
(xy 42.685 52.74425) (xy 42.688072 52.43) (xy 42.675812 52.305518) (xy 42.639502 52.18582) (xy 42.580537 52.075506)
(xy 42.501185 51.978815) (xy 42.404494 51.899463) (xy 42.29418 51.840498) (xy 42.174482 51.804188) (xy 42.05 51.791928)
(xy 41.23575 51.795) (xy 41.077 51.95375) (xy 40.823 51.95375) (xy 40.66425 51.795) (xy 39.85 51.791928)
(xy 39.725518 51.804188) (xy 39.60582 51.840498) (xy 39.495506 51.899463) (xy 39.398815 51.978815) (xy 39.319463 52.075506)
(xy 39.260498 52.18582) (xy 39.224188 52.305518) (xy 39.211928 52.43) (xy 38.228824 52.43) (xy 38.228824 50.925)
(xy 42.161928 50.925) (xy 42.174188 51.049482) (xy 42.210498 51.16918) (xy 42.269463 51.279494) (xy 42.348815 51.376185)
(xy 42.445506 51.455537) (xy 42.55582 51.514502) (xy 42.675518 51.550812) (xy 42.8 51.563072) (xy 43.21425 51.56)
(xy 43.373 51.40125) (xy 43.373 50.5645) (xy 43.627 50.5645) (xy 43.627 51.40125) (xy 43.78575 51.56)
(xy 44.2 51.563072) (xy 44.324482 51.550812) (xy 44.44418 51.514502) (xy 44.554494 51.455537) (xy 44.651185 51.376185)
(xy 44.730537 51.279494) (xy 44.789502 51.16918) (xy 44.825812 51.049482) (xy 44.838072 50.925) (xy 44.835 50.72325)
(xy 44.67625 50.5645) (xy 43.627 50.5645) (xy 43.373 50.5645) (xy 42.32375 50.5645) (xy 42.165 50.72325)
(xy 42.161928 50.925) (xy 38.228824 50.925) (xy 38.228824 47.85) (xy 38.221545 47.776095) (xy 38.199988 47.70503)
(xy 38.164981 47.639537) (xy 38.117869 47.582131) (xy 38.060463 47.535019) (xy 37.99497 47.500012) (xy 37.923905 47.478455)
(xy 37.85 47.471176) (xy 31.45 47.471176) (xy 31.376095 47.478455) (xy 31.30503 47.500012) (xy 31.239537 47.535019)
(xy 31.182131 47.582131) (xy 31.135019 47.639537) (xy 31.100012 47.70503) (xy 31.078455 47.776095) (xy 31.071176 47.85)
(xy 31.071176 48.673) (xy 31.009125 48.673) (xy 31.003115 48.661756) (xy 30.928799 48.571201) (xy 30.838244 48.496885)
(xy 30.734932 48.441664) (xy 30.622831 48.407658) (xy 30.50625 48.396176) (xy 30.06875 48.396176) (xy 29.952169 48.407658)
(xy 29.840068 48.441664) (xy 29.736756 48.496885) (xy 29.726057 48.505666) (xy 29.680537 48.420506) (xy 29.601185 48.323815)
(xy 29.504494 48.244463) (xy 29.39418 48.185498) (xy 29.274482 48.149188) (xy 29.15 48.136928) (xy 28.99825 48.14)
(xy 28.8395 48.29875) (xy 28.8395 49.123) (xy 28.8595 49.123) (xy 28.8595 49.377) (xy 28.8395 49.377)
(xy 28.8395 50.20125) (xy 28.99825 50.36) (xy 29.15 50.363072) (xy 29.274482 50.350812) (xy 29.39418 50.314502)
(xy 29.504494 50.255537) (xy 29.601185 50.176185) (xy 29.680537 50.079494) (xy 29.726057 49.994334) (xy 29.736756 50.003115)
(xy 29.840068 50.058336) (xy 29.952169 50.092342) (xy 30.06875 50.103824) (xy 30.50625 50.103824) (xy 30.622831 50.092342)
(xy 30.734932 50.058336) (xy 30.838244 50.003115) (xy 30.928799 49.928799) (xy 31.003115 49.838244) (xy 31.009125 49.827)
(xy 31.071176 49.827) (xy 31.071176 53.65) (xy 31.078455 53.723905) (xy 31.100012 53.79497) (xy 31.135019 53.860463)
(xy 31.182131 53.917869) (xy 31.239537 53.964981) (xy 31.30503 53.999988) (xy 31.376095 54.021545) (xy 31.45 54.028824)
(xy 33.73091 54.028824) (xy 30.660317 57.099417) (xy 30.626868 57.126868) (xy 30.599417 57.160317) (xy 20.559585 67.20015)
(xy 20.589502 67.14418) (xy 20.625812 67.024482) (xy 20.638072 66.9) (xy 20.635 66.58575) (xy 20.47625 66.427)
(xy 19.027 66.427) (xy 18.773 66.427) (xy 18.753 66.427) (xy 18.753 66.173) (xy 18.773 66.173)
(xy 18.773 65.22375) (xy 19.027 65.22375) (xy 19.027 66.173) (xy 20.47625 66.173) (xy 20.635 66.01425)
(xy 20.638072 65.7) (xy 20.625812 65.575518) (xy 20.589502 65.45582) (xy 20.530537 65.345506) (xy 20.451185 65.248815)
(xy 20.354494 65.169463) (xy 20.24418 65.110498) (xy 20.124482 65.074188) (xy 20 65.061928) (xy 19.18575 65.065)
(xy 19.027 65.22375) (xy 18.773 65.22375) (xy 18.61425 65.065) (xy 18.127 65.063162) (xy 18.127 61.431955)
(xy 19.863 61.431955) (xy 19.863 61.648045) (xy 19.905157 61.859983) (xy 19.987851 62.059624) (xy 20.107904 62.239297)
(xy 20.260703 62.392096) (xy 20.440376 62.512149) (xy 20.640017 62.594843) (xy 20.851955 62.637) (xy 21.068045 62.637)
(xy 21.279983 62.594843) (xy 21.479624 62.512149) (xy 21.659297 62.392096) (xy 21.812096 62.239297) (xy 21.932149 62.059624)
(xy 22.014843 61.859983) (xy 22.057 61.648045) (xy 22.057 61.431955) (xy 22.014843 61.220017) (xy 21.932149 61.020376)
(xy 21.812096 60.840703) (xy 21.659297 60.687904) (xy 21.479624 60.567851) (xy 21.279983 60.485157) (xy 21.068045 60.443)
(xy 20.851955 60.443) (xy 20.640017 60.485157) (xy 20.440376 60.567851) (xy 20.260703 60.687904) (xy 20.107904 60.840703)
(xy 19.987851 61.020376) (xy 19.905157 61.220017) (xy 19.863 61.431955) (xy 18.127 61.431955) (xy 18.127 60.323292)
(xy 18.227027 60.347811) (xy 18.49368 60.359561) (xy 18.757501 60.319063) (xy 19.008353 60.227875) (xy 19.114068 60.171368)
(xy 19.175955 59.93556) (xy 18.42 59.179605) (xy 18.405858 59.193748) (xy 18.226253 59.014143) (xy 18.240395 59)
(xy 18.599605 59) (xy 19.35556 59.755955) (xy 19.591368 59.694068) (xy 19.704266 59.45221) (xy 19.767811 59.192973)
(xy 19.779561 58.92632) (xy 19.774286 58.891955) (xy 22.403 58.891955) (xy 22.403 59.108045) (xy 22.445157 59.319983)
(xy 22.527851 59.519624) (xy 22.647904 59.699297) (xy 22.800703 59.852096) (xy 22.980376 59.972149) (xy 23.180017 60.054843)
(xy 23.391955 60.097) (xy 23.608045 60.097) (xy 23.819983 60.054843) (xy 24.019624 59.972149) (xy 24.199297 59.852096)
(xy 24.352096 59.699297) (xy 24.472149 59.519624) (xy 24.554843 59.319983) (xy 24.597 59.108045) (xy 24.597 58.891955)
(xy 24.554843 58.680017) (xy 24.472149 58.480376) (xy 24.352096 58.300703) (xy 24.199297 58.147904) (xy 24.019624 58.027851)
(xy 23.819983 57.945157) (xy 23.608045 57.903) (xy 23.391955 57.903) (xy 23.180017 57.945157) (xy 22.980376 58.027851)
(xy 22.800703 58.147904) (xy 22.647904 58.300703) (xy 22.527851 58.480376) (xy 22.445157 58.680017) (xy 22.403 58.891955)
(xy 19.774286 58.891955) (xy 19.739063 58.662499) (xy 19.647875 58.411647) (xy 19.591368 58.305932) (xy 19.35556 58.244045)
(xy 18.599605 59) (xy 18.240395 59) (xy 18.226253 58.985858) (xy 18.405858 58.806253) (xy 18.42 58.820395)
(xy 19.175955 58.06444) (xy 19.114068 57.828632) (xy 18.87221 57.715734) (xy 18.612973 57.652189) (xy 18.34632 57.640439)
(xy 18.127 57.674106) (xy 18.127 55.849604) (xy 19.473 55.849604) (xy 19.473 56.150396) (xy 19.531681 56.44541)
(xy 19.64679 56.723306) (xy 19.813901 56.973406) (xy 20.026594 57.186099) (xy 20.276694 57.35321) (xy 20.55459 57.468319)
(xy 20.849604 57.527) (xy 21.150396 57.527) (xy 21.44541 57.468319) (xy 21.723306 57.35321) (xy 21.973406 57.186099)
(xy 22.186099 56.973406) (xy 22.35321 56.723306) (xy 22.468319 56.44541) (xy 22.527 56.150396) (xy 22.527 55.849604)
(xy 22.505945 55.74375) (xy 23.396176 55.74375) (xy 23.396176 56.25625) (xy 23.407658 56.372831) (xy 23.441664 56.484932)
(xy 23.496885 56.588244) (xy 23.571201 56.678799) (xy 23.661756 56.753115) (xy 23.765068 56.808336) (xy 23.877169 56.842342)
(xy 23.99375 56.853824) (xy 24.43125 56.853824) (xy 24.547831 56.842342) (xy 24.659932 56.808336) (xy 24.763244 56.753115)
(xy 24.853799 56.678799) (xy 24.928115 56.588244) (xy 24.983336 56.484932) (xy 25 56.429999) (xy 25.016664 56.484932)
(xy 25.071885 56.588244) (xy 25.146201 56.678799) (xy 25.236756 56.753115) (xy 25.340068 56.808336) (xy 25.452169 56.842342)
(xy 25.56875 56.853824) (xy 26.00625 56.853824) (xy 26.122831 56.842342) (xy 26.234932 56.808336) (xy 26.338244 56.753115)
(xy 26.428799 56.678799) (xy 26.503115 56.588244) (xy 26.53585 56.527) (xy 27.160141 56.527) (xy 27.203004 56.55564)
(xy 27.317111 56.602905) (xy 27.438246 56.627) (xy 27.561754 56.627) (xy 27.682889 56.602905) (xy 27.796996 56.55564)
(xy 27.899689 56.487023) (xy 27.987023 56.399689) (xy 28.05564 56.296996) (xy 28.102905 56.182889) (xy 28.127 56.061754)
(xy 28.127 55.938246) (xy 28.102905 55.817111) (xy 28.05564 55.703004) (xy 27.987023 55.600311) (xy 27.899689 55.512977)
(xy 27.796996 55.44436) (xy 27.682889 55.397095) (xy 27.561754 55.373) (xy 27.438246 55.373) (xy 27.317111 55.397095)
(xy 27.203004 55.44436) (xy 27.160141 55.473) (xy 26.53585 55.473) (xy 26.503115 55.411756) (xy 26.428799 55.321201)
(xy 26.338244 55.246885) (xy 26.234932 55.191664) (xy 26.122831 55.157658) (xy 26.00625 55.146176) (xy 25.56875 55.146176)
(xy 25.452169 55.157658) (xy 25.340068 55.191664) (xy 25.236756 55.246885) (xy 25.232008 55.250781) (xy 25.45579 55.027)
(xy 27.46415 55.027) (xy 27.496885 55.088244) (xy 27.571201 55.178799) (xy 27.661756 55.253115) (xy 27.765068 55.308336)
(xy 27.877169 55.342342) (xy 27.99375 55.353824) (xy 28.43125 55.353824) (xy 28.547831 55.342342) (xy 28.659932 55.308336)
(xy 28.763244 55.253115) (xy 28.773943 55.244334) (xy 28.819463 55.329494) (xy 28.898815 55.426185) (xy 28.995506 55.505537)
(xy 29.10582 55.564502) (xy 29.225518 55.600812) (xy 29.35 55.613072) (xy 29.50175 55.61) (xy 29.6605 55.45125)
(xy 29.6605 54.627) (xy 29.9145 54.627) (xy 29.9145 55.45125) (xy 30.07325 55.61) (xy 30.225 55.613072)
(xy 30.349482 55.600812) (xy 30.46918 55.564502) (xy 30.579494 55.505537) (xy 30.676185 55.426185) (xy 30.755537 55.329494)
(xy 30.814502 55.21918) (xy 30.850812 55.099482) (xy 30.863072 54.975) (xy 30.86 54.78575) (xy 30.70125 54.627)
(xy 29.9145 54.627) (xy 29.6605 54.627) (xy 29.6405 54.627) (xy 29.6405 54.373) (xy 29.6605 54.373)
(xy 29.6605 53.54875) (xy 29.9145 53.54875) (xy 29.9145 54.373) (xy 30.70125 54.373) (xy 30.86 54.21425)
(xy 30.863072 54.025) (xy 30.850812 53.900518) (xy 30.814502 53.78082) (xy 30.755537 53.670506) (xy 30.676185 53.573815)
(xy 30.579494 53.494463) (xy 30.46918 53.435498) (xy 30.349482 53.399188) (xy 30.225 53.386928) (xy 30.07325 53.39)
(xy 29.9145 53.54875) (xy 29.6605 53.54875) (xy 29.50175 53.39) (xy 29.35 53.386928) (xy 29.225518 53.399188)
(xy 29.10582 53.435498) (xy 28.995506 53.494463) (xy 28.898815 53.573815) (xy 28.819463 53.670506) (xy 28.773943 53.755666)
(xy 28.763244 53.746885) (xy 28.659932 53.691664) (xy 28.547831 53.657658) (xy 28.43125 53.646176) (xy 27.99375 53.646176)
(xy 27.877169 53.657658) (xy 27.765068 53.691664) (xy 27.661756 53.746885) (xy 27.571201 53.821201) (xy 27.496885 53.911756)
(xy 27.46415 53.973) (xy 25.263381 53.973) (xy 25.2375 53.970451) (xy 25.211619 53.973) (xy 25.13419 53.980626)
(xy 25.03485 54.010761) (xy 24.943298 54.059696) (xy 24.863052 54.125552) (xy 24.846549 54.145661) (xy 23.858162 55.134049)
(xy 23.838053 55.150552) (xy 23.817322 55.175813) (xy 23.765068 55.191664) (xy 23.661756 55.246885) (xy 23.571201 55.321201)
(xy 23.496885 55.411756) (xy 23.441664 55.515068) (xy 23.407658 55.627169) (xy 23.396176 55.74375) (xy 22.505945 55.74375)
(xy 22.468319 55.55459) (xy 22.35321 55.276694) (xy 22.186099 55.026594) (xy 21.973406 54.813901) (xy 21.723306 54.64679)
(xy 21.44541 54.531681) (xy 21.150396 54.473) (xy 20.849604 54.473) (xy 20.55459 54.531681) (xy 20.276694 54.64679)
(xy 20.026594 54.813901) (xy 19.813901 55.026594) (xy 19.64679 55.276694) (xy 19.531681 55.55459) (xy 19.473 55.849604)
(xy 18.127 55.849604) (xy 18.127 51.849604) (xy 19.473 51.849604) (xy 19.473 52.150396) (xy 19.531681 52.44541)
(xy 19.64679 52.723306) (xy 19.813901 52.973406) (xy 20.026594 53.186099) (xy 20.276694 53.35321) (xy 20.55459 53.468319)
(xy 20.849604 53.527) (xy 21.150396 53.527) (xy 21.44541 53.468319) (xy 21.723306 53.35321) (xy 21.973406 53.186099)
(xy 22.186099 52.973406) (xy 22.35321 52.723306) (xy 22.468319 52.44541) (xy 22.527 52.150396) (xy 22.527 51.849604)
(xy 22.468319 51.55459) (xy 22.35321 51.276694) (xy 22.186099 51.026594) (xy 21.973406 50.813901) (xy 21.723306 50.64679)
(xy 21.44541 50.531681) (xy 21.150396 50.473) (xy 20.849604 50.473) (xy 20.55459 50.531681) (xy 20.276694 50.64679)
(xy 20.026594 50.813901) (xy 19.813901 51.026594) (xy 19.64679 51.276694) (xy 19.531681 51.55459) (xy 19.473 51.849604)
(xy 18.127 51.849604) (xy 18.127 49.24375) (xy 23.396176 49.24375) (xy 23.396176 49.75625) (xy 23.407658 49.872831)
(xy 23.441664 49.984932) (xy 23.496885 50.088244) (xy 23.571201 50.178799) (xy 23.661756 50.253115) (xy 23.6855 50.265806)
(xy 23.685501 51.234193) (xy 23.661756 51.246885) (xy 23.571201 51.321201) (xy 23.496885 51.411756) (xy 23.441664 51.515068)
(xy 23.407658 51.627169) (xy 23.396176 51.74375) (xy 23.396176 52.25625) (xy 23.407658 52.372831) (xy 23.441664 52.484932)
(xy 23.496885 52.588244) (xy 23.571201 52.678799) (xy 23.661756 52.753115) (xy 23.765068 52.808336) (xy 23.877169 52.842342)
(xy 23.99375 52.853824) (xy 24.43125 52.853824) (xy 24.547831 52.842342) (xy 24.659932 52.808336) (xy 24.763244 52.753115)
(xy 24.853799 52.678799) (xy 24.928115 52.588244) (xy 24.983336 52.484932) (xy 25 52.43) (xy 25.016664 52.484932)
(xy 25.071885 52.588244) (xy 25.146201 52.678799) (xy 25.236756 52.753115) (xy 25.340068 52.808336) (xy 25.452169 52.842342)
(xy 25.56875 52.853824) (xy 26.00625 52.853824) (xy 26.122831 52.842342) (xy 26.234932 52.808336) (xy 26.338244 52.753115)
(xy 26.428799 52.678799) (xy 26.503115 52.588244) (xy 26.53585 52.527) (xy 26.660141 52.527) (xy 26.703004 52.55564)
(xy 26.817111 52.602905) (xy 26.938246 52.627) (xy 27.061754 52.627) (xy 27.182889 52.602905) (xy 27.296996 52.55564)
(xy 27.399689 52.487023) (xy 27.487023 52.399689) (xy 27.55564 52.296996) (xy 27.602905 52.182889) (xy 27.627 52.061754)
(xy 27.627 51.938246) (xy 27.602905 51.817111) (xy 27.55564 51.703004) (xy 27.487023 51.600311) (xy 27.399689 51.512977)
(xy 27.296996 51.44436) (xy 27.182889 51.397095) (xy 27.061754 51.373) (xy 26.938246 51.373) (xy 26.817111 51.397095)
(xy 26.703004 51.44436) (xy 26.660141 51.473) (xy 26.53585 51.473) (xy 26.503115 51.411756) (xy 26.428799 51.321201)
(xy 26.338244 51.246885) (xy 26.234932 51.191664) (xy 26.122831 51.157658) (xy 26.00625 51.146176) (xy 25.56875 51.146176)
(xy 25.452169 51.157658) (xy 25.340068 51.191664) (xy 25.236756 51.246885) (xy 25.146201 51.321201) (xy 25.071885 51.411756)
(xy 25.016664 51.515068) (xy 25 51.570001) (xy 24.983336 51.515068) (xy 24.928115 51.411756) (xy 24.853799 51.321201)
(xy 24.763244 51.246885) (xy 24.7395 51.234194) (xy 24.7395 50.265806) (xy 24.763244 50.253115) (xy 24.773943 50.244334)
(xy 24.819463 50.329494) (xy 24.898815 50.426185) (xy 24.995506 50.505537) (xy 25.10582 50.564502) (xy 25.225518 50.600812)
(xy 25.35 50.613072) (xy 25.50175 50.61) (xy 25.6605 50.45125) (xy 25.6605 49.627) (xy 25.9145 49.627)
(xy 25.9145 50.45125) (xy 26.07325 50.61) (xy 26.225 50.613072) (xy 26.349482 50.600812) (xy 26.46918 50.564502)
(xy 26.579494 50.505537) (xy 26.676185 50.426185) (xy 26.755537 50.329494) (xy 26.814502 50.21918) (xy 26.850812 50.099482)
(xy 26.863072 49.975) (xy 26.86 49.78575) (xy 26.79925 49.725) (xy 27.636928 49.725) (xy 27.649188 49.849482)
(xy 27.685498 49.96918) (xy 27.744463 50.079494) (xy 27.823815 50.176185) (xy 27.920506 50.255537) (xy 28.03082 50.314502)
(xy 28.150518 50.350812) (xy 28.275 50.363072) (xy 28.42675 50.36) (xy 28.5855 50.20125) (xy 28.5855 49.377)
(xy 27.79875 49.377) (xy 27.64 49.53575) (xy 27.636928 49.725) (xy 26.79925 49.725) (xy 26.70125 49.627)
(xy 25.9145 49.627) (xy 25.6605 49.627) (xy 25.6405 49.627) (xy 25.6405 49.373) (xy 25.6605 49.373)
(xy 25.6605 48.54875) (xy 25.9145 48.54875) (xy 25.9145 49.373) (xy 26.70125 49.373) (xy 26.86 49.21425)
(xy 26.863072 49.025) (xy 26.850812 48.900518) (xy 26.814502 48.78082) (xy 26.811392 48.775) (xy 27.636928 48.775)
(xy 27.64 48.96425) (xy 27.79875 49.123) (xy 28.5855 49.123) (xy 28.5855 48.29875) (xy 28.42675 48.14)
(xy 28.275 48.136928) (xy 28.150518 48.149188) (xy 28.03082 48.185498) (xy 27.920506 48.244463) (xy 27.823815 48.323815)
(xy 27.744463 48.420506) (xy 27.685498 48.53082) (xy 27.649188 48.650518) (xy 27.636928 48.775) (xy 26.811392 48.775)
(xy 26.755537 48.670506) (xy 26.676185 48.573815) (xy 26.579494 48.494463) (xy 26.46918 48.435498) (xy 26.349482 48.399188)
(xy 26.225 48.386928) (xy 26.07325 48.39) (xy 25.9145 48.54875) (xy 25.6605 48.54875) (xy 25.50175 48.39)
(xy 25.35 48.386928) (xy 25.225518 48.399188) (xy 25.10582 48.435498) (xy 24.995506 48.494463) (xy 24.898815 48.573815)
(xy 24.819463 48.670506) (xy 24.773943 48.755666) (xy 24.763244 48.746885) (xy 24.659932 48.691664) (xy 24.547831 48.657658)
(xy 24.43125 48.646176) (xy 23.99375 48.646176) (xy 23.877169 48.657658) (xy 23.765068 48.691664) (xy 23.661756 48.746885)
(xy 23.571201 48.821201) (xy 23.496885 48.911756) (xy 23.441664 49.015068) (xy 23.407658 49.127169) (xy 23.396176 49.24375)
(xy 18.127 49.24375) (xy 18.127 43.627) (xy 40.073001 43.627)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
)
)
(filled_polygon
(pts
(xy 43.399188 104.150518) (xy 43.386928 104.275) (xy 43.39 104.42675) (xy 43.54875 104.5855) (xy 44.373 104.5855)
(xy 44.373 104.5655) (xy 44.627 104.5655) (xy 44.627 104.5855) (xy 44.647 104.5855) (xy 44.647 104.8395)
(xy 44.627 104.8395) (xy 44.627 104.8595) (xy 44.373 104.8595) (xy 44.373 104.8395) (xy 43.54875 104.8395)
(xy 43.39 104.99825) (xy 43.386928 105.15) (xy 43.399188 105.274482) (xy 43.435498 105.39418) (xy 43.494463 105.504494)
(xy 43.573815 105.601185) (xy 43.670506 105.680537) (xy 43.755666 105.726057) (xy 43.746885 105.736756) (xy 43.691664 105.840068)
(xy 43.657658 105.952169) (xy 43.646176 106.06875) (xy 43.646176 106.50625) (xy 43.657658 106.622831) (xy 43.691664 106.734932)
(xy 43.746885 106.838244) (xy 43.821201 106.928799) (xy 43.911756 107.003115) (xy 44.015068 107.058336) (xy 44.127169 107.092342)
(xy 44.24375 107.103824) (xy 44.75625 107.103824) (xy 44.872831 107.092342) (xy 44.984932 107.058336) (xy 45.088244 107.003115)
(xy 45.178799 106.928799) (xy 45.221176 106.877162) (xy 45.221176 107.3) (xy 45.228455 107.373905) (xy 45.250012 107.44497)
(xy 45.285019 107.510463) (xy 45.332131 107.567869) (xy 45.389537 107.614981) (xy 45.45503 107.649988) (xy 45.526095 107.671545)
(xy 45.6 107.678824) (xy 47.4 107.678824) (xy 47.473905 107.671545) (xy 47.54497 107.649988) (xy 47.610463 107.614981)
(xy 47.667869 107.567869) (xy 47.714981 107.510463) (xy 47.749988 107.44497) (xy 47.771545 107.373905) (xy 47.778824 107.3)
(xy 47.778824 107.232756) (xy 47.843004 107.27564) (xy 47.957111 107.322905) (xy 48.078246 107.347) (xy 48.201754 107.347)
(xy 48.322889 107.322905) (xy 48.378186 107.3) (xy 48.961928 107.3) (xy 48.974188 107.424482) (xy 49.010498 107.54418)
(xy 49.069463 107.654494) (xy 49.148815 107.751185) (xy 49.245506 107.830537) (xy 49.35582 107.889502) (xy 49.475518 107.925812)
(xy 49.6 107.938072) (xy 50.21425 107.935) (xy 50.373 107.77625) (xy 50.373 106.827) (xy 49.12375 106.827)
(xy 48.965 106.98575) (xy 48.961928 107.3) (xy 48.378186 107.3) (xy 48.436996 107.27564) (xy 48.539689 107.207023)
(xy 48.627023 107.119689) (xy 48.69564 107.016996) (xy 48.742905 106.902889) (xy 48.767 106.781754) (xy 48.767 106.658246)
(xy 48.742905 106.537111) (xy 48.69564 106.423004) (xy 48.627023 106.320311) (xy 48.539689 106.232977) (xy 48.527 106.224499)
(xy 48.527 106.1) (xy 48.961928 106.1) (xy 48.965 106.41425) (xy 49.12375 106.573) (xy 50.373 106.573)
(xy 50.373 105.62375) (xy 50.21425 105.465) (xy 49.6 105.461928) (xy 49.475518 105.474188) (xy 49.35582 105.510498)
(xy 49.245506 105.569463) (xy 49.148815 105.648815) (xy 49.069463 105.745506) (xy 49.010498 105.85582) (xy 48.974188 105.975518)
(xy 48.961928 106.1) (xy 48.527 106.1) (xy 48.527 104.605845) (xy 48.562977 104.659689) (xy 48.650311 104.747023)
(xy 48.753004 104.81564) (xy 48.867111 104.862905) (xy 48.988246 104.887) (xy 49.111754 104.887) (xy 49.221176 104.865235)
(xy 49.221176 104.9) (xy 49.228455 104.973905) (xy 49.250012 105.04497) (xy 49.285019 105.110463) (xy 49.332131 105.167869)
(xy 49.389537 105.214981) (xy 49.45503 105.249988) (xy 49.526095 105.271545) (xy 49.6 105.278824) (xy 51.4 105.278824)
(xy 51.473905 105.271545) (xy 51.54497 105.249988) (xy 51.564592 105.2395) (xy 51.734194 105.2395) (xy 51.746885 105.263244)
(xy 51.755666 105.273943) (xy 51.670506 105.319463) (xy 51.573815 105.398815) (xy 51.512895 105.473047) (xy 51.4 105.461928)
(xy 50.78575 105.465) (xy 50.627 105.62375) (xy 50.627 106.573) (xy 50.647 106.573) (xy 50.647 106.827)
(xy 50.627 106.827) (xy 50.627 107.77625) (xy 50.78575 107.935) (xy 51.4 107.938072) (xy 51.524482 107.925812)
(xy 51.64418 107.889502) (xy 51.754494 107.830537) (xy 51.851185 107.751185) (xy 51.930537 107.654494) (xy 51.989502 107.54418)
(xy 52.025812 107.424482) (xy 52.031871 107.36296) (xy 52.21425 107.36) (xy 52.373 107.20125) (xy 52.373 106.4145)
(xy 52.627 106.4145) (xy 52.627 107.20125) (xy 52.78575 107.36) (xy 52.975 107.363072) (xy 53.099482 107.350812)
(xy 53.21918 107.314502) (xy 53.329494 107.255537) (xy 53.426185 107.176185) (xy 53.505537 107.079494) (xy 53.564502 106.96918)
(xy 53.600812 106.849482) (xy 53.613072 106.725) (xy 53.61 106.57325) (xy 53.45125 106.4145) (xy 52.627 106.4145)
(xy 52.373 106.4145) (xy 52.353 106.4145) (xy 52.353 106.1605) (xy 52.373 106.1605) (xy 52.373 106.1405)
(xy 52.627 106.1405) (xy 52.627 106.1605) (xy 53.45125 106.1605) (xy 53.61 106.00175) (xy 53.613072 105.85)
(xy 53.600812 105.725518) (xy 53.564502 105.60582) (xy 53.505537 105.495506) (xy 53.426185 105.398815) (xy 53.329494 105.319463)
(xy 53.244334 105.273943) (xy 53.253115 105.263244) (xy 53.308336 105.159932) (xy 53.342342 105.047831) (xy 53.353824 104.93125)
(xy 53.353824 104.49375) (xy 53.342342 104.377169) (xy 53.308336 104.265068) (xy 53.283714 104.219003) (xy 53.698778 104.634068)
(xy 53.679443 104.644403) (xy 53.660197 104.660197) (xy 53.644403 104.679443) (xy 53.632667 104.701399) (xy 53.62544 104.725224)
(xy 53.623 104.75) (xy 53.623 108.373) (xy 43.127 108.373) (xy 43.127 104.08079) (xy 43.16079 104.047)
(xy 43.43059 104.047)
)
)
(filled_polygon
(pts
(xy 46.251329 102.819279) (xy 46.331844 102.843703) (xy 46.392452 102.919731) (xy 46.488006 103.000449) (xy 46.597472 103.060974)
(xy 46.716642 103.09898) (xy 46.748333 103.102417) (xy 46.627 103.22375) (xy 46.627 104.173) (xy 46.647 104.173)
(xy 46.647 104.427) (xy 46.627 104.427) (xy 46.627 105.37625) (xy 46.78575 105.535) (xy 47.4 105.538072)
(xy 47.473001 105.530882) (xy 47.473001 105.728366) (xy 47.4 105.721176) (xy 45.6 105.721176) (xy 45.526095 105.728455)
(xy 45.45503 105.750012) (xy 45.435408 105.7605) (xy 45.265806 105.7605) (xy 45.253115 105.736756) (xy 45.244334 105.726057)
(xy 45.329494 105.680537) (xy 45.426185 105.601185) (xy 45.487105 105.526953) (xy 45.6 105.538072) (xy 46.21425 105.535)
(xy 46.373 105.37625) (xy 46.373 104.427) (xy 46.353 104.427) (xy 46.353 104.173) (xy 46.373 104.173)
(xy 46.373 103.22375) (xy 46.21425 103.065) (xy 45.6 103.061928) (xy 45.519716 103.069835) (xy 45.527 102.995881)
(xy 45.527 102.995879) (xy 45.529549 102.970001) (xy 45.527 102.944123) (xy 45.527 102.853824) (xy 45.575 102.853824)
(xy 45.663537 102.845104) (xy 45.748671 102.819279) (xy 45.75 102.818569) (xy 45.751329 102.819279) (xy 45.836463 102.845104)
(xy 45.925 102.853824) (xy 46.075 102.853824) (xy 46.163537 102.845104) (xy 46.248671 102.819279) (xy 46.25 102.818569)
)
)
(filled_polygon
(pts
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 52.005721 102.573671) (xy 52.023 102.605998) (xy 52.023 102.95125) (xy 52.145729 103.073979) (xy 52.123 103.188246)
(xy 52.123 103.311754) (xy 52.147095 103.432889) (xy 52.19436 103.546996) (xy 52.262977 103.649689) (xy 52.350311 103.737023)
(xy 52.453004 103.80564) (xy 52.567111 103.852905) (xy 52.688246 103.877) (xy 52.811754 103.877) (xy 52.92015 103.855439)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(xy 53.030997 103.966286) (xy 52.984932 103.941664) (xy 52.872831 103.907658) (xy 52.75625 103.896176) (xy 52.24375 103.896176)
(xy 52.127169 103.907658) (xy 52.015068 103.941664) (xy 51.911756 103.996885) (xy 51.821201 104.071201) (xy 51.778824 104.122838)
(xy 51.778824 103.7) (xy 51.771545 103.626095) (xy 51.749988 103.55503) (xy 51.714981 103.489537) (xy 51.667869 103.432131)
(xy 51.610463 103.385019) (xy 51.54497 103.350012) (xy 51.473905 103.328455) (xy 51.4 103.321176) (xy 49.6 103.321176)
(xy 49.526095 103.328455) (xy 49.45503 103.350012) (xy 49.389537 103.385019) (xy 49.332131 103.432131) (xy 49.285019 103.489537)
(xy 49.250012 103.55503) (xy 49.228455 103.626095) (xy 49.225546 103.655634) (xy 49.182327 103.647038) (xy 49.027 103.491711)
(xy 49.027 102.853824) (xy 49.075 102.853824) (xy 49.163537 102.845104) (xy 49.248671 102.819279) (xy 49.25 102.818569)
(xy 49.251329 102.819279) (xy 49.336463 102.845104) (xy 49.425 102.853824) (xy 49.575 102.853824) (xy 49.663537 102.845104)
(xy 49.748671 102.819279) (xy 49.75 102.818569) (xy 49.751329 102.819279) (xy 49.836463 102.845104) (xy 49.925 102.853824)
(xy 50.075 102.853824) (xy 50.163537 102.845104) (xy 50.248671 102.819279) (xy 50.25 102.818569) (xy 50.251329 102.819279)
(xy 50.336463 102.845104) (xy 50.425 102.853824) (xy 50.575 102.853824) (xy 50.663537 102.845104) (xy 50.748671 102.819279)
(xy 50.75 102.818569) (xy 50.751329 102.819279) (xy 50.836463 102.845104) (xy 50.925 102.853824) (xy 51.075 102.853824)
(xy 51.163537 102.845104) (xy 51.248671 102.819279) (xy 51.25 102.818569) (xy 51.251329 102.819279) (xy 51.331844 102.843703)
(xy 51.392452 102.919731) (xy 51.488006 103.000449) (xy 51.597472 103.060974) (xy 51.716642 103.09898) (xy 51.81825 103.11)
(xy 51.977 102.95125) (xy 51.977 102.605998) (xy 51.994279 102.573671) (xy 52 102.554811)
)
)
(filled_polygon
(pts
(xy 77.009053 97.254344) (xy 77.025552 97.274448) (xy 77.105798 97.340304) (xy 77.19735 97.389239) (xy 77.29669 97.419374)
(xy 77.353813 97.425) (xy 77.4 97.429549) (xy 77.425881 97.427) (xy 78.596176 97.427) (xy 78.596176 97.775)
(xy 78.603455 97.848905) (xy 78.611371 97.875) (xy 78.603455 97.901095) (xy 78.596176 97.975) (xy 78.596176 98.425)
(xy 78.603455 98.498905) (xy 78.625012 98.56997) (xy 78.660019 98.635463) (xy 78.707131 98.692869) (xy 78.764537 98.739981)
(xy 78.83003 98.774988) (xy 78.901095 98.796545) (xy 78.975 98.803824) (xy 79.185501 98.803824) (xy 79.1855 99.984193)
(xy 79.161756 99.996885) (xy 79.071201 100.071201) (xy 78.996885 100.161756) (xy 78.941664 100.265068) (xy 78.907658 100.377169)
(xy 78.896176 100.49375) (xy 78.896176 101.00625) (xy 78.907658 101.122831) (xy 78.941664 101.234932) (xy 78.996885 101.338244)
(xy 79.071201 101.428799) (xy 79.161756 101.503115) (xy 79.1855 101.515807) (xy 79.1855 101.734193) (xy 79.161756 101.746885)
(xy 79.071201 101.821201) (xy 78.996885 101.911756) (xy 78.941664 102.015068) (xy 78.907658 102.127169) (xy 78.896176 102.24375)
(xy 78.896176 102.75625) (xy 78.907658 102.872831) (xy 78.938044 102.973) (xy 78.061956 102.973) (xy 78.092342 102.872831)
(xy 78.103824 102.75625) (xy 78.103824 102.24375) (xy 78.092342 102.127169) (xy 78.058336 102.015068) (xy 78.003115 101.911756)
(xy 77.928799 101.821201) (xy 77.838244 101.746885) (xy 77.8145 101.734194) (xy 77.8145 101.515806) (xy 77.838244 101.503115)
(xy 77.928799 101.428799) (xy 78.003115 101.338244) (xy 78.058336 101.234932) (xy 78.092342 101.122831) (xy 78.103824 101.00625)
(xy 78.103824 100.49375) (xy 78.092342 100.377169) (xy 78.058336 100.265068) (xy 78.003115 100.161756) (xy 77.928799 100.071201)
(xy 77.838244 99.996885) (xy 77.814248 99.984059) (xy 77.806874 99.90919) (xy 77.796004 99.873357) (xy 77.776739 99.80985)
(xy 77.727804 99.718298) (xy 77.661948 99.638052) (xy 77.641839 99.621549) (xy 75.215955 97.195666) (xy 75.199448 97.175552)
(xy 75.119202 97.109696) (xy 75.02765 97.060761) (xy 74.92831 97.030626) (xy 74.903824 97.028214) (xy 74.903824 96.827)
(xy 74.907437 96.827) (xy 74.972809 96.892372) (xy 75.108259 96.982877) (xy 75.258763 97.045218) (xy 75.418538 97.077)
(xy 75.581442 97.077) (xy 75.741217 97.045218) (xy 75.891721 96.982877) (xy 76.027171 96.892372) (xy 76.142362 96.777181)
(xy 76.232867 96.641731) (xy 76.280777 96.526067)
)
)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(filled_polygon
(pts
(xy 50.487774 96.725196) (xy 50.508973 96.751027) (xy 50.612059 96.835628) (xy 50.72967 96.898492) (xy 50.857285 96.937204)
(xy 50.956748 96.947) (xy 50.956757 96.947) (xy 50.989999 96.950274) (xy 51.023241 96.947) (xy 51.239578 96.947)
(xy 52.372775 98.080197) (xy 52.393973 98.106027) (xy 52.419802 98.127224) (xy 53.247778 98.955201) (xy 53.268973 98.981027)
(xy 53.294799 99.002222) (xy 53.294801 99.002224) (xy 53.372059 99.065628) (xy 53.48967 99.128492) (xy 53.617285 99.167204)
(xy 53.75 99.180275) (xy 53.783252 99.177) (xy 54.425585 99.177) (xy 54.597359 99.352279) (xy 54.615552 99.374448)
(xy 54.653655 99.405718) (xy 54.691365 99.437309) (xy 54.69372 99.438598) (xy 54.695798 99.440304) (xy 54.739262 99.463536)
(xy 54.782419 99.487167) (xy 54.78498 99.487972) (xy 54.78735 99.489239) (xy 54.834525 99.50355) (xy 54.881449 99.518303)
(xy 54.884115 99.518593) (xy 54.88669 99.519374) (xy 54.923506 99.523) (xy 54.89875 99.523) (xy 54.74 99.68175)
(xy 54.75102 99.783358) (xy 54.789026 99.902528) (xy 54.849551 100.011994) (xy 54.930269 100.107548) (xy 55.006297 100.168156)
(xy 55.030721 100.248671) (xy 55.072659 100.327131) (xy 55.129098 100.395902) (xy 55.197869 100.452341) (xy 55.276329 100.494279)
(xy 55.361463 100.520104) (xy 55.45 100.528824) (xy 56.9 100.528824) (xy 56.988537 100.520104) (xy 57.073671 100.494279)
(xy 57.152131 100.452341) (xy 57.220902 100.395902) (xy 57.277341 100.327131) (xy 57.319279 100.248671) (xy 57.343703 100.168156)
(xy 57.419731 100.107548) (xy 57.500449 100.011994) (xy 57.560974 99.902528) (xy 57.59898 99.783358) (xy 57.61 99.68175)
(xy 57.555252 99.627002) (xy 57.61 99.627002) (xy 57.61 99.527) (xy 57.96415 99.527) (xy 57.996885 99.588244)
(xy 58.071201 99.678799) (xy 58.161756 99.753115) (xy 58.265068 99.808336) (xy 58.377169 99.842342) (xy 58.49375 99.853824)
(xy 58.93125 99.853824) (xy 59.047831 99.842342) (xy 59.159932 99.808336) (xy 59.263244 99.753115) (xy 59.273943 99.744334)
(xy 59.319463 99.829494) (xy 59.398815 99.926185) (xy 59.495506 100.005537) (xy 59.60582 100.064502) (xy 59.725518 100.100812)
(xy 59.85 100.113072) (xy 60.00175 100.11) (xy 60.1605 99.95125) (xy 60.1605 99.127) (xy 60.1405 99.127)
(xy 60.1405 98.873) (xy 60.1605 98.873) (xy 60.1605 98.853) (xy 60.4145 98.853) (xy 60.4145 98.873)
(xy 61.20125 98.873) (xy 61.36 98.71425) (xy 61.362026 98.589448) (xy 62.823001 100.050424) (xy 62.823001 100.308837)
(xy 62.814502 100.28082) (xy 62.755537 100.170506) (xy 62.676185 100.073815) (xy 62.579494 99.994463) (xy 62.46918 99.935498)
(xy 62.349482 99.899188) (xy 62.225 99.886928) (xy 62.07325 99.89) (xy 61.9145 100.04875) (xy 61.9145 100.873)
(xy 61.9345 100.873) (xy 61.9345 101.127) (xy 61.9145 101.127) (xy 61.9145 101.147) (xy 61.6605 101.147)
(xy 61.6605 101.127) (xy 61.6405 101.127) (xy 61.6405 100.873) (xy 61.6605 100.873) (xy 61.6605 100.04875)
(xy 61.50175 99.89) (xy 61.35 99.886928) (xy 61.225518 99.899188) (xy 61.189332 99.910165) (xy 61.255537 99.829494)
(xy 61.314502 99.71918) (xy 61.350812 99.599482) (xy 61.363072 99.475) (xy 61.36 99.28575) (xy 61.20125 99.127)
(xy 60.4145 99.127) (xy 60.4145 99.95125) (xy 60.57325 100.11) (xy 60.725 100.113072) (xy 60.849482 100.100812)
(xy 60.885668 100.089835) (xy 60.819463 100.170506) (xy 60.773943 100.255666) (xy 60.763244 100.246885) (xy 60.659932 100.191664)
(xy 60.547831 100.157658) (xy 60.43125 100.146176) (xy 59.99375 100.146176) (xy 59.877169 100.157658) (xy 59.765068 100.191664)
(xy 59.661756 100.246885) (xy 59.571201 100.321201) (xy 59.496885 100.411756) (xy 59.441664 100.515068) (xy 59.407658 100.627169)
(xy 59.396176 100.74375) (xy 59.396176 101.25625) (xy 59.407658 101.372831) (xy 59.441664 101.484932) (xy 59.448001 101.496787)
(xy 59.448001 101.95732) (xy 59.409359 101.969042) (xy 59.36 101.995425) (xy 59.36 101.872998) (xy 59.201252 101.872998)
(xy 59.36 101.71425) (xy 59.363072 101.525) (xy 59.350812 101.400518) (xy 59.314502 101.28082) (xy 59.255537 101.170506)
(xy 59.176185 101.073815) (xy 59.079494 100.994463) (xy 58.96918 100.935498) (xy 58.849482 100.899188) (xy 58.725 100.886928)
(xy 58.57325 100.89) (xy 58.4145 101.04875) (xy 58.4145 101.873) (xy 58.4345 101.873) (xy 58.4345 102.127)
(xy 58.4145 102.127) (xy 58.4145 102.147) (xy 58.1605 102.147) (xy 58.1605 102.127) (xy 58.1405 102.127)
(xy 58.1405 101.873) (xy 58.1605 101.873) (xy 58.1605 101.04875) (xy 58.00175 100.89) (xy 57.85 100.886928)
(xy 57.725518 100.899188) (xy 57.60582 100.935498) (xy 57.495506 100.994463) (xy 57.398815 101.073815) (xy 57.319463 101.170506)
(xy 57.273943 101.255666) (xy 57.263244 101.246885) (xy 57.159932 101.191664) (xy 57.047831 101.157658) (xy 56.93125 101.146176)
(xy 56.49375 101.146176) (xy 56.377169 101.157658) (xy 56.265068 101.191664) (xy 56.201881 101.225438) (xy 56.12765 101.185761)
(xy 56.02831 101.155626) (xy 55.950881 101.148) (xy 55.925 101.145451) (xy 55.899119 101.148) (xy 55.028824 101.148)
(xy 55.028824 100.95) (xy 55.020104 100.861463) (xy 54.994279 100.776329) (xy 54.952341 100.697869) (xy 54.895902 100.629098)
(xy 54.827131 100.572659) (xy 54.748671 100.530721) (xy 54.663537 100.504896) (xy 54.575 100.496176) (xy 54.425 100.496176)
(xy 54.336463 100.504896) (xy 54.251329 100.530721) (xy 54.25 100.531431) (xy 54.248671 100.530721) (xy 54.163537 100.504896)
(xy 54.075 100.496176) (xy 53.925 100.496176) (xy 53.836463 100.504896) (xy 53.751329 100.530721) (xy 53.75 100.531431)
(xy 53.748671 100.530721) (xy 53.663537 100.504896) (xy 53.575 100.496176) (xy 53.425 100.496176) (xy 53.379345 100.500673)
(xy 53.399689 100.487079) (xy 53.487023 100.399745) (xy 53.55564 100.297052) (xy 53.602905 100.182945) (xy 53.627 100.06181)
(xy 53.627 99.938302) (xy 53.602905 99.817167) (xy 53.55564 99.70306) (xy 53.487023 99.600367) (xy 53.399689 99.513033)
(xy 53.296996 99.444416) (xy 53.182889 99.397151) (xy 53.061754 99.373056) (xy 52.938246 99.373056) (xy 52.817111 99.397151)
(xy 52.703004 99.444416) (xy 52.600311 99.513033) (xy 52.512977 99.600367) (xy 52.44436 99.70306) (xy 52.397095 99.817167)
(xy 52.387038 99.867728) (xy 52.145661 100.109106) (xy 52.125553 100.125608) (xy 52.074883 100.18735) (xy 52.059696 100.205855)
(xy 52.041446 100.24) (xy 52.005273 100.24) (xy 51.99362 100.19827) (xy 51.990954 100.193005) (xy 51.989239 100.18735)
(xy 51.967519 100.146714) (xy 51.946731 100.105653) (xy 51.943089 100.101009) (xy 51.940304 100.095798) (xy 51.911071 100.060177)
(xy 51.898721 100.044428) (xy 51.894671 100.040194) (xy 51.874448 100.015552) (xy 51.858878 100.002774) (xy 50.134673 98.200196)
(xy 50.130946 98.195655) (xy 50.116759 98.181468) (xy 50.102942 98.167023) (xy 50.098501 98.16321) (xy 49.767 97.83171)
(xy 49.767 96.004422)
)
)
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(filled_polygon
(pts
(xy 76.625786 100.096076) (xy 76.571885 100.161756) (xy 76.516664 100.265068) (xy 76.5 100.320001) (xy 76.483336 100.265068)
(xy 76.428115 100.161756) (xy 76.353799 100.071201) (xy 76.263244 99.996885) (xy 76.159932 99.941664) (xy 76.047831 99.907658)
(xy 75.93125 99.896176) (xy 75.49375 99.896176) (xy 75.377169 99.907658) (xy 75.265068 99.941664) (xy 75.161756 99.996885)
(xy 75.071201 100.071201) (xy 74.996885 100.161756) (xy 74.941664 100.265068) (xy 74.907658 100.377169) (xy 74.901913 100.4355)
(xy 74.515806 100.4355) (xy 74.503115 100.411756) (xy 74.428799 100.321201) (xy 74.338244 100.246885) (xy 74.234932 100.191664)
(xy 74.122831 100.157658) (xy 74.00625 100.146176) (xy 73.49375 100.146176) (xy 73.377169 100.157658) (xy 73.265068 100.191664)
(xy 73.161756 100.246885) (xy 73.071201 100.321201) (xy 72.996885 100.411756) (xy 72.941664 100.515068) (xy 72.907658 100.627169)
(xy 72.896176 100.74375) (xy 72.896176 101.071034) (xy 72.119596 101.847615) (xy 72.088244 101.821885) (xy 71.984932 101.766664)
(xy 71.929999 101.75) (xy 71.984932 101.733336) (xy 72.088244 101.678115) (xy 72.178799 101.603799) (xy 72.253115 101.513244)
(xy 72.308336 101.409932) (xy 72.342342 101.297831) (xy 72.353824 101.18125) (xy 72.353824 100.74375) (xy 72.342342 100.627169)
(xy 72.308336 100.515068) (xy 72.253115 100.411756) (xy 72.178799 100.321201) (xy 72.088244 100.246885) (xy 72.027 100.21415)
(xy 72.027 99.693289) (xy 72.941747 98.778542) (xy 73.001095 98.796545) (xy 73.075 98.803824) (xy 74.525 98.803824)
(xy 74.598905 98.796545) (xy 74.66997 98.774988) (xy 74.735463 98.739981) (xy 74.792869 98.692869) (xy 74.839981 98.635463)
(xy 74.874988 98.56997) (xy 74.896545 98.498905) (xy 74.903824 98.425) (xy 74.903824 98.374113)
)
)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(filled_polygon
(pts
(xy 46.10669 99.059374) (xy 46.184119 99.067) (xy 46.184121 99.067) (xy 46.209999 99.069549) (xy 46.235877 99.067)
(xy 46.973001 99.067) (xy 46.973 100.24) (xy 46.872998 100.24) (xy 46.872998 100.294748) (xy 46.81825 100.24)
(xy 46.716642 100.25102) (xy 46.597472 100.289026) (xy 46.488006 100.349551) (xy 46.392452 100.430269) (xy 46.331844 100.506297)
(xy 46.251329 100.530721) (xy 46.25 100.531431) (xy 46.248671 100.530721) (xy 46.163537 100.504896) (xy 46.075 100.496176)
(xy 45.925 100.496176) (xy 45.836463 100.504896) (xy 45.751329 100.530721) (xy 45.75 100.531431) (xy 45.748671 100.530721)
(xy 45.663537 100.504896) (xy 45.575 100.496176) (xy 45.527 100.496176) (xy 45.527 100.144101) (xy 45.539374 100.10331)
(xy 45.549101 100.004549) (xy 45.549549 100.000001) (xy 45.547 99.974123) (xy 45.547 99.588289) (xy 46.083079 99.052212)
)
)
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(filled_polygon
(pts
(xy 39.39 97.127002) (xy 39.444748 97.127002) (xy 39.39 97.18175) (xy 39.40102 97.283358) (xy 39.439026 97.402528)
(xy 39.499551 97.511994) (xy 39.580269 97.607548) (xy 39.656297 97.668156) (xy 39.680721 97.748671) (xy 39.681431 97.75)
(xy 39.680721 97.751329) (xy 39.654896 97.836463) (xy 39.646176 97.925) (xy 39.646176 98.075) (xy 39.654896 98.163537)
(xy 39.680721 98.248671) (xy 39.681431 98.25) (xy 39.680721 98.251329) (xy 39.654896 98.336463) (xy 39.646176 98.425)
(xy 39.646176 98.575) (xy 39.654896 98.663537) (xy 39.680721 98.748671) (xy 39.681431 98.75) (xy 39.680721 98.751329)
(xy 39.656297 98.831844) (xy 39.580269 98.892452) (xy 39.545437 98.933687) (xy 39.45125 98.8395) (xy 38.627 98.8395)
(xy 38.627 98.8595) (xy 38.373 98.8595) (xy 38.373 98.8395) (xy 38.353 98.8395) (xy 38.353 98.5855)
(xy 38.373 98.5855) (xy 38.373 97.79875) (xy 38.627 97.79875) (xy 38.627 98.5855) (xy 39.45125 98.5855)
(xy 39.61 98.42675) (xy 39.613072 98.275) (xy 39.600812 98.150518) (xy 39.564502 98.03082) (xy 39.505537 97.920506)
(xy 39.426185 97.823815) (xy 39.329494 97.744463) (xy 39.21918 97.685498) (xy 39.099482 97.649188) (xy 38.975 97.636928)
(xy 38.78575 97.64) (xy 38.627 97.79875) (xy 38.373 97.79875) (xy 38.21425 97.64) (xy 38.025 97.636928)
(xy 37.900518 97.649188) (xy 37.78082 97.685498) (xy 37.777 97.68754) (xy 37.777 97.21829) (xy 37.96829 97.027)
(xy 39.39 97.027)
)
)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(filled_polygon
(pts
(xy 74.632605 86.087894) (xy 74.610153 86.142097) (xy 74.563 86.379151) (xy 74.563 86.620849) (xy 74.610153 86.857903)
(xy 74.702647 87.081202) (xy 74.836927 87.282167) (xy 75.007833 87.453073) (xy 75.208798 87.587353) (xy 75.432097 87.679847)
(xy 75.669151 87.727) (xy 75.910849 87.727) (xy 76.147903 87.679847) (xy 76.371202 87.587353) (xy 76.572167 87.453073)
(xy 76.743073 87.282167) (xy 76.877353 87.081202) (xy 76.899804 87.027) (xy 80.781711 87.027) (xy 81.677593 87.922883)
(xy 81.599482 87.899188) (xy 81.475 87.886928) (xy 81.32325 87.89) (xy 81.1645 88.04875) (xy 81.1645 88.873)
(xy 81.95125 88.873) (xy 82.11 88.71425) (xy 82.113072 88.525) (xy 82.100812 88.400518) (xy 82.077117 88.322407)
(xy 83.223001 89.468291) (xy 83.223001 89.93754) (xy 83.21918 89.935498) (xy 83.099482 89.899188) (xy 82.975 89.886928)
(xy 82.78575 89.89) (xy 82.627 90.04875) (xy 82.627 90.8355) (xy 82.647 90.8355) (xy 82.647 91.0895)
(xy 82.627 91.0895) (xy 82.627 91.1095) (xy 82.373 91.1095) (xy 82.373 91.0895) (xy 82.353 91.0895)
(xy 82.353 90.8355) (xy 82.373 90.8355) (xy 82.373 90.04875) (xy 82.21425 89.89) (xy 82.025 89.886928)
(xy 81.952546 89.894064) (xy 82.005537 89.829494) (xy 82.064502 89.71918) (xy 82.100812 89.599482) (xy 82.113072 89.475)
(xy 82.11 89.28575) (xy 81.95125 89.127) (xy 81.1645 89.127) (xy 81.1645 89.95125) (xy 81.32325 90.11)
(xy 81.475 90.113072) (xy 81.547454 90.105936) (xy 81.494463 90.170506) (xy 81.483402 90.1912) (xy 81.372831 90.157658)
(xy 81.25625 90.146176) (xy 80.81875 90.146176) (xy 80.702169 90.157658) (xy 80.590068 90.191664) (xy 80.486756 90.246885)
(xy 80.396201 90.321201) (xy 80.321885 90.411756) (xy 80.266664 90.515068) (xy 80.25 90.570001) (xy 80.233336 90.515068)
(xy 80.178115 90.411756) (xy 80.103799 90.321201) (xy 80.013244 90.246885) (xy 79.909932 90.191664) (xy 79.797831 90.157658)
(xy 79.68125 90.146176) (xy 79.24375 90.146176) (xy 79.127169 90.157658) (xy 79.015068 90.191664) (xy 78.911756 90.246885)
(xy 78.821201 90.321201) (xy 78.746885 90.411756) (xy 78.691664 90.515068) (xy 78.657658 90.627169) (xy 78.646176 90.74375)
(xy 78.646176 91.25625) (xy 78.657658 91.372831) (xy 78.691664 91.484932) (xy 78.746885 91.588244) (xy 78.821201 91.678799)
(xy 78.90796 91.75) (xy 78.821201 91.821201) (xy 78.746885 91.911756) (xy 78.71415 91.973) (xy 77.839859 91.973)
(xy 77.796996 91.94436) (xy 77.682889 91.897095) (xy 77.561754 91.873) (xy 77.438246 91.873) (xy 77.317111 91.897095)
(xy 77.203004 91.94436) (xy 77.100311 92.012977) (xy 77.012977 92.100311) (xy 76.94436 92.203004) (xy 76.897095 92.317111)
(xy 76.873 92.438246) (xy 76.873 92.561754) (xy 76.897095 92.682889) (xy 76.94436 92.796996) (xy 77.012977 92.899689)
(xy 77.100311 92.987023) (xy 77.203004 93.05564) (xy 77.317111 93.102905) (xy 77.438246 93.127) (xy 77.561754 93.127)
(xy 77.682889 93.102905) (xy 77.796996 93.05564) (xy 77.839859 93.027) (xy 78.71415 93.027) (xy 78.746885 93.088244)
(xy 78.821201 93.178799) (xy 78.911756 93.253115) (xy 78.9355 93.265807) (xy 78.935501 93.700066) (xy 78.901095 93.703455)
(xy 78.83003 93.725012) (xy 78.764537 93.760019) (xy 78.707131 93.807131) (xy 78.660019 93.864537) (xy 78.625012 93.93003)
(xy 78.603455 94.001095) (xy 78.596176 94.075) (xy 78.596176 94.525) (xy 78.603455 94.598905) (xy 78.611371 94.625)
(xy 78.603455 94.651095) (xy 78.596176 94.725) (xy 78.596176 95.175) (xy 78.603455 95.248905) (xy 78.611371 95.275)
(xy 78.603455 95.301095) (xy 78.596176 95.375) (xy 78.596176 95.51494) (xy 78.530737 95.566997) (xy 78.449922 95.662469)
(xy 78.389285 95.771873) (xy 78.351156 95.891004) (xy 78.34 95.99325) (xy 78.49875 96.152) (xy 78.787023 96.152)
(xy 78.83003 96.174988) (xy 78.901095 96.196545) (xy 78.975 96.203824) (xy 80.425 96.203824) (xy 80.498905 96.196545)
(xy 80.56997 96.174988) (xy 80.612977 96.152) (xy 80.90125 96.152) (xy 80.92625 96.127) (xy 81.624119 96.127)
(xy 81.65 96.129549) (xy 81.675881 96.127) (xy 81.75331 96.119374) (xy 81.85265 96.089239) (xy 81.89 96.069275)
(xy 81.89 96.089502) (xy 82.048748 96.089502) (xy 81.89 96.24825) (xy 81.886928 96.4) (xy 81.899188 96.524482)
(xy 81.935498 96.64418) (xy 81.994463 96.754494) (xy 82.073815 96.851185) (xy 82.170506 96.930537) (xy 82.255666 96.976057)
(xy 82.246885 96.986756) (xy 82.227512 97.023) (xy 81.325881 97.023) (xy 81.3 97.020451) (xy 81.274119 97.023)
(xy 80.803824 97.023) (xy 80.803824 96.98506) (xy 80.869263 96.933003) (xy 80.950078 96.837531) (xy 81.010715 96.728127)
(xy 81.048844 96.608996) (xy 81.06 96.50675) (xy 80.90125 96.348) (xy 80.612977 96.348) (xy 80.56997 96.325012)
(xy 80.498905 96.303455) (xy 80.425 96.296176) (xy 78.975 96.296176) (xy 78.901095 96.303455) (xy 78.83003 96.325012)
(xy 78.787023 96.348) (xy 78.49875 96.348) (xy 78.47375 96.373) (xy 77.618291 96.373) (xy 76.777 95.531711)
(xy 76.777 91.96829) (xy 76.882328 91.862962) (xy 76.932889 91.852905) (xy 77.046996 91.80564) (xy 77.149689 91.737023)
(xy 77.237023 91.649689) (xy 77.30564 91.546996) (xy 77.352905 91.432889) (xy 77.377 91.311754) (xy 77.377 91.188246)
(xy 77.352905 91.067111) (xy 77.30564 90.953004) (xy 77.237023 90.850311) (xy 77.149689 90.762977) (xy 77.046996 90.69436)
(xy 76.932889 90.647095) (xy 76.811754 90.623) (xy 76.688246 90.623) (xy 76.567111 90.647095) (xy 76.453004 90.69436)
(xy 76.350311 90.762977) (xy 76.262977 90.850311) (xy 76.19436 90.953004) (xy 76.147095 91.067111) (xy 76.137038 91.117672)
(xy 76.027 91.22771) (xy 76.027 90.243896) (xy 76.147903 90.219847) (xy 76.371202 90.127353) (xy 76.572167 89.993073)
(xy 76.743073 89.822167) (xy 76.877353 89.621202) (xy 76.916373 89.527) (xy 78.71415 89.527) (xy 78.746885 89.588244)
(xy 78.821201 89.678799) (xy 78.911756 89.753115) (xy 79.015068 89.808336) (xy 79.127169 89.842342) (xy 79.24375 89.853824)
(xy 79.68125 89.853824) (xy 79.797831 89.842342) (xy 79.909932 89.808336) (xy 80.013244 89.753115) (xy 80.023943 89.744334)
(xy 80.069463 89.829494) (xy 80.148815 89.926185) (xy 80.245506 90.005537) (xy 80.35582 90.064502) (xy 80.475518 90.100812)
(xy 80.6 90.113072) (xy 80.75175 90.11) (xy 80.9105 89.95125) (xy 80.9105 89.127) (xy 80.8905 89.127)
(xy 80.8905 88.873) (xy 80.9105 88.873) (xy 80.9105 88.04875) (xy 80.75175 87.89) (xy 80.6 87.886928)
(xy 80.475518 87.899188) (xy 80.35582 87.935498) (xy 80.245506 87.994463) (xy 80.148815 88.073815) (xy 80.069463 88.170506)
(xy 80.023943 88.255666) (xy 80.013244 88.246885) (xy 79.909932 88.191664) (xy 79.797831 88.157658) (xy 79.68125 88.146176)
(xy 79.24375 88.146176) (xy 79.127169 88.157658) (xy 79.015068 88.191664) (xy 78.911756 88.246885) (xy 78.821201 88.321201)
(xy 78.746885 88.411756) (xy 78.71415 88.473) (xy 76.883236 88.473) (xy 76.877353 88.458798) (xy 76.743073 88.257833)
(xy 76.572167 88.086927) (xy 76.371202 87.952647) (xy 76.147903 87.860153) (xy 75.910849 87.813) (xy 75.669151 87.813)
(xy 75.432097 87.860153) (xy 75.208798 87.952647) (xy 75.007833 88.086927) (xy 74.977001 88.117759) (xy 74.977001 87.725882)
(xy 74.97955 87.700001) (xy 74.971874 87.622059) (xy 74.969375 87.596691) (xy 74.93924 87.497351) (xy 74.890305 87.405799)
(xy 74.824449 87.325553) (xy 74.804345 87.309054) (xy 74.478824 86.983534) (xy 74.478824 85.934113)
)
)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(filled_polygon
(pts
(xy 39.646176 93.075) (xy 39.654896 93.163537) (xy 39.680721 93.248671) (xy 39.681431 93.25) (xy 39.680721 93.251329)
(xy 39.654896 93.336463) (xy 39.646176 93.425) (xy 39.646176 93.575) (xy 39.654896 93.663537) (xy 39.680721 93.748671)
(xy 39.681431 93.75) (xy 39.680721 93.751329) (xy 39.654896 93.836463) (xy 39.646176 93.925) (xy 39.646176 93.973)
(xy 34.25829 93.973) (xy 34.030955 93.745666) (xy 34.014448 93.725552) (xy 33.934202 93.659696) (xy 33.84265 93.610761)
(xy 33.74331 93.580626) (xy 33.665881 93.573) (xy 33.64 93.570451) (xy 33.614119 93.573) (xy 33.512652 93.573)
(xy 33.587353 93.461202) (xy 33.679847 93.237903) (xy 33.721798 93.027) (xy 39.646176 93.027)
)
)
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(filled_polygon
(pts
(xy 59.9145 86.373) (xy 59.9345 86.373) (xy 59.9345 86.627) (xy 59.9145 86.627) (xy 59.9145 87.45125)
(xy 59.96325 87.5) (xy 59.9145 87.54875) (xy 59.9145 88.373) (xy 59.9345 88.373) (xy 59.9345 88.627)
(xy 59.9145 88.627) (xy 59.9145 89.45125) (xy 60.07325 89.61) (xy 60.225 89.613072) (xy 60.333 89.602435)
(xy 60.333 91.051709) (xy 57.411711 93.973) (xy 57.353824 93.973) (xy 57.353824 93.925) (xy 57.345104 93.836463)
(xy 57.319279 93.751329) (xy 57.318569 93.75) (xy 57.319279 93.748671) (xy 57.345104 93.663537) (xy 57.353824 93.575)
(xy 57.353824 93.425) (xy 57.345104 93.336463) (xy 57.319279 93.251329) (xy 57.318569 93.25) (xy 57.319279 93.248671)
(xy 57.345104 93.163537) (xy 57.353824 93.075) (xy 57.353824 92.925) (xy 57.345104 92.836463) (xy 57.319279 92.751329)
(xy 57.318569 92.75) (xy 57.319279 92.748671) (xy 57.345104 92.663537) (xy 57.353824 92.575) (xy 57.353824 92.425)
(xy 57.345104 92.336463) (xy 57.319279 92.251329) (xy 57.318569 92.25) (xy 57.319279 92.248671) (xy 57.345104 92.163537)
(xy 57.353824 92.075) (xy 57.353824 91.925) (xy 57.345104 91.836463) (xy 57.319279 91.751329) (xy 57.318569 91.75)
(xy 57.319279 91.748671) (xy 57.345104 91.663537) (xy 57.353824 91.575) (xy 57.353824 91.425) (xy 57.345104 91.336463)
(xy 57.319279 91.251329) (xy 57.318569 91.25) (xy 57.319279 91.248671) (xy 57.345104 91.163537) (xy 57.353824 91.075)
(xy 57.353824 90.925) (xy 57.345104 90.836463) (xy 57.319279 90.751329) (xy 57.318569 90.75) (xy 57.319279 90.748671)
(xy 57.345104 90.663537) (xy 57.353824 90.575) (xy 57.353824 90.425) (xy 57.345104 90.336463) (xy 57.319279 90.251329)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 57.318569 90.25) (xy 57.319279 90.248671) (xy 57.345104 90.163537) (xy 57.353824 90.075) (xy 57.353824 89.925)
(xy 57.345104 89.836463) (xy 57.319279 89.751329) (xy 57.318569 89.75) (xy 57.319279 89.748671) (xy 57.345104 89.663537)
(xy 57.353824 89.575) (xy 57.353824 89.425) (xy 57.345104 89.336463) (xy 57.319279 89.251329) (xy 57.318569 89.25)
(xy 57.319279 89.248671) (xy 57.345104 89.163537) (xy 57.353824 89.075) (xy 57.353824 89.027) (xy 57.46415 89.027)
(xy 57.496885 89.088244) (xy 57.571201 89.178799) (xy 57.661756 89.253115) (xy 57.765068 89.308336) (xy 57.877169 89.342342)
(xy 57.99375 89.353824) (xy 58.43125 89.353824) (xy 58.547831 89.342342) (xy 58.659932 89.308336) (xy 58.763244 89.253115)
(xy 58.773943 89.244334) (xy 58.819463 89.329494) (xy 58.898815 89.426185) (xy 58.995506 89.505537) (xy 59.10582 89.564502)
(xy 59.225518 89.600812) (xy 59.35 89.613072) (xy 59.50175 89.61) (xy 59.6605 89.45125) (xy 59.6605 88.627)
(xy 59.6405 88.627) (xy 59.6405 88.373) (xy 59.6605 88.373) (xy 59.6605 87.54875) (xy 59.61175 87.5)
(xy 59.6605 87.45125) (xy 59.6605 86.627) (xy 59.6405 86.627) (xy 59.6405 86.373) (xy 59.6605 86.373)
(xy 59.6605 86.353) (xy 59.9145 86.353)
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
)
)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(filled_polygon
(pts
(xy 35.499049 91.854339) (xy 35.515552 91.874448) (xy 35.595798 91.940304) (xy 35.656969 91.973) (xy 33.32824 91.973)
(xy 33.282167 91.926927) (xy 33.132447 91.826888) (xy 33.35 91.828072) (xy 33.474482 91.815812) (xy 33.59418 91.779502)
(xy 33.704494 91.720537) (xy 33.801185 91.641185) (xy 33.880537 91.544494) (xy 33.939502 91.43418) (xy 33.975812 91.314482)
(xy 33.988072 91.19) (xy 33.985 90.62575) (xy 33.826252 90.467002) (xy 33.985 90.467002) (xy 33.985 90.34029)
)
)
(filled_polygon
(pts
(xy 37.616195 90.541755) (xy 37.602979 90.572437) (xy 37.593685 90.615962) (xy 37.583172 90.659216) (xy 37.581767 90.692597)
(xy 37.581707 90.693127) (xy 37.580626 90.696691) (xy 37.575904 90.74464) (xy 37.573416 90.766719) (xy 37.573364 90.770423)
(xy 37.573 90.77412) (xy 37.573 90.796408) (xy 37.572326 90.844514) (xy 37.573 90.84817) (xy 37.573 91.042842)
(xy 37.547321 91.030029) (xy 37.515093 91.021232) (xy 37.497124 91.014944) (xy 37.46645 91.001731) (xy 37.422906 90.992432)
(xy 37.379651 90.981919) (xy 37.354016 90.98084) (xy 37.35331 90.980626) (xy 37.305364 90.975904) (xy 37.283296 90.973417)
(xy 37.279586 90.973365) (xy 37.275881 90.973) (xy 37.253616 90.973) (xy 37.205501 90.972324) (xy 37.201834 90.973)
(xy 36.10829 90.973) (xy 35.66229 90.527) (xy 37.621358 90.527)
)
)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(filled_polygon
(pts
(xy 76.396176 76.891099) (xy 76.396176 77.00625) (xy 76.407658 77.122831) (xy 76.441664 77.234932) (xy 76.496885 77.338244)
(xy 76.571201 77.428799) (xy 76.661756 77.503115) (xy 76.733209 77.541307) (xy 76.670089 77.575045) (xy 76.576693 77.651693)
(xy 76.500045 77.745089) (xy 76.443091 77.851643) (xy 76.408018 77.967261) (xy 76.396176 78.0875) (xy 76.396176 78.6625)
(xy 76.408018 78.782739) (xy 76.443091 78.898357) (xy 76.500045 79.004911) (xy 76.576693 79.098307) (xy 76.670089 79.174955)
(xy 76.776643 79.231909) (xy 76.83628 79.25) (xy 76.776643 79.268091) (xy 76.670089 79.325045) (xy 76.576693 79.401693)
(xy 76.53869 79.448) (xy 75.028824 79.448) (xy 75.028824 78.4) (xy 75.021545 78.326095) (xy 74.999988 78.25503)
(xy 74.964981 78.189537) (xy 74.917869 78.132131) (xy 74.860463 78.085019) (xy 74.79497 78.050012) (xy 74.723905 78.028455)
(xy 74.65 78.021176) (xy 73.427 78.021176) (xy 73.427 76.477008) (xy 75.982086 76.477008)
)
)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(filled_polygon
(pts
(xy 42.949256 84.253115) (xy 42.973001 84.265807) (xy 42.973 84.89) (xy 42.872998 84.89) (xy 42.872998 84.944748)
(xy 42.81825 84.89) (xy 42.716642 84.90102) (xy 42.671931 84.915279) (xy 42.667204 84.867285) (xy 42.628492 84.73967)
(xy 42.565628 84.622059) (xy 42.53599 84.585945) (xy 42.60668 84.564502) (xy 42.716994 84.505537) (xy 42.813685 84.426185)
(xy 42.893037 84.329494) (xy 42.938557 84.244334)
)
)
(filled_polygon
(pts
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(xy 40.671358 72.356293) (xy 40.778707 72.463642) (xy 40.833121 72.5) (xy 40.778707 72.536358) (xy 40.671358 72.643707)
(xy 40.587015 72.769937) (xy 40.528918 72.910195) (xy 40.4993 73.059093) (xy 40.4993 73.16041) (xy 39.895662 73.764049)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 39.875553 73.780552) (xy 39.820062 73.848168) (xy 39.809696 73.860799) (xy 39.760761 73.952351) (xy 39.730626 74.051691)
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(xy 39.720451 74.155) (xy 39.723001 74.18089) (xy 39.723 75.53171) (xy 39.375662 75.879049) (xy 39.355553 75.895552)
(xy 39.310869 75.95) (xy 39.289696 75.975799) (xy 39.240761 76.067351) (xy 39.210626 76.166691) (xy 39.200451 76.27)
(xy 39.203001 76.295891) (xy 39.203 78.655141) (xy 39.17436 78.698004) (xy 39.127095 78.812111) (xy 39.103 78.933246)
(xy 39.103 79.056754) (xy 39.127095 79.177889) (xy 39.17436 79.291996) (xy 39.242977 79.394689) (xy 39.330311 79.482023)
(xy 39.433004 79.55064) (xy 39.547111 79.597905) (xy 39.548981 79.598277) (xy 39.496885 79.661756) (xy 39.441664 79.765068)
(xy 39.407658 79.877169) (xy 39.396176 79.99375) (xy 39.396176 80.50625) (xy 39.407658 80.622831) (xy 39.441664 80.734932)
(xy 39.496885 80.838244) (xy 39.571201 80.928799) (xy 39.661756 81.003115) (xy 39.765068 81.058336) (xy 39.877169 81.092342)
(xy 39.99375 81.103824) (xy 40.43125 81.103824) (xy 40.547831 81.092342) (xy 40.659932 81.058336) (xy 40.763244 81.003115)
(xy 40.773943 80.994334) (xy 40.819463 81.079494) (xy 40.898815 81.176185) (xy 40.995506 81.255537) (xy 41.10582 81.314502)
(xy 41.225518 81.350812) (xy 41.35 81.363072) (xy 41.50175 81.36) (xy 41.6605 81.20125) (xy 41.6605 80.377)
(xy 41.9145 80.377) (xy 41.9145 81.20125) (xy 42.07325 81.36) (xy 42.225 81.363072) (xy 42.349482 81.350812)
(xy 42.46918 81.314502) (xy 42.579494 81.255537) (xy 42.676185 81.176185) (xy 42.755537 81.079494) (xy 42.814502 80.96918)
(xy 42.850812 80.849482) (xy 42.863072 80.725) (xy 42.86 80.53575) (xy 42.70125 80.377) (xy 41.9145 80.377)
(xy 41.6605 80.377) (xy 41.6405 80.377) (xy 41.6405 80.123) (xy 41.6605 80.123) (xy 41.6605 79.29875)
(xy 41.9145 79.29875) (xy 41.9145 80.123) (xy 42.70125 80.123) (xy 42.86 79.96425) (xy 42.863072 79.775)
(xy 42.850812 79.650518) (xy 42.814502 79.53082) (xy 42.755537 79.420506) (xy 42.676185 79.323815) (xy 42.579494 79.244463)
(xy 42.46918 79.185498) (xy 42.349482 79.149188) (xy 42.225 79.136928) (xy 42.07325 79.14) (xy 41.9145 79.29875)
(xy 41.6605 79.29875) (xy 41.50175 79.14) (xy 41.35 79.136928) (xy 41.225518 79.149188) (xy 41.10582 79.185498)
(xy 40.995506 79.244463) (xy 40.898815 79.323815) (xy 40.819463 79.420506) (xy 40.773943 79.505666) (xy 40.763244 79.496885)
(xy 40.741295 79.485153) (xy 40.742049 79.477499) (xy 40.731874 79.37419) (xy 40.701739 79.27485) (xy 40.652804 79.183298)
(xy 40.640865 79.16875) (xy 40.586948 79.103052) (xy 40.566839 79.086549) (xy 40.342962 78.862673) (xy 40.332905 78.812111)
(xy 40.28564 78.698004) (xy 40.257 78.655141) (xy 40.257 77.078006) (xy 40.317111 77.102905) (xy 40.365824 77.112595)
(xy 40.375551 77.124447) (xy 40.455797 77.190303) (xy 40.526146 77.227905) (xy 40.547349 77.239238) (xy 40.646689 77.269373)
(xy 40.749999 77.279548) (xy 40.77588 77.276999) (xy 41.03171 77.276999) (xy 43.760511 80.005801) (xy 43.76051 82.650289)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(xy 43.71875 82.646176) (xy 43.28125 82.646176) (xy 43.164669 82.657658) (xy 43.052568 82.691664) (xy 42.949256 82.746885)
(xy 42.938557 82.755666) (xy 42.893037 82.670506) (xy 42.813685 82.573815) (xy 42.716994 82.494463) (xy 42.60668 82.435498)
(xy 42.486982 82.399188) (xy 42.3625 82.386928) (xy 42.21075 82.39) (xy 42.052 82.54875) (xy 42.052 83.373)
(xy 42.072 83.373) (xy 42.072 83.627) (xy 42.052 83.627) (xy 42.052 83.647) (xy 41.798 83.647)
(xy 41.798 83.627) (xy 41.778 83.627) (xy 41.778 83.373) (xy 41.798 83.373) (xy 41.798 82.54875)
(xy 41.63925 82.39) (xy 41.4875 82.386928) (xy 41.363018 82.399188) (xy 41.24332 82.435498) (xy 41.133006 82.494463)
(xy 41.036315 82.573815) (xy 40.956963 82.670506) (xy 40.897998 82.78082) (xy 40.877 82.850041) (xy 40.877 81.5)
(xy 40.869756 81.426451) (xy 40.848303 81.355728) (xy 40.813464 81.29055) (xy 40.766579 81.233421) (xy 40.70945 81.186536)
(xy 40.644272 81.151697) (xy 40.573549 81.130244) (xy 40.5 81.123) (xy 38.246273 81.123) (xy 38.197677 81.108259)
(xy 38.075 81.096176) (xy 37.2395 81.096176) (xy 37.2395 78.765806) (xy 37.263244 78.753115) (xy 37.353799 78.678799)
(xy 37.428115 78.588244) (xy 37.483336 78.484932) (xy 37.5 78.429999) (xy 37.516664 78.484932) (xy 37.571885 78.588244)
(xy 37.646201 78.678799) (xy 37.736756 78.753115) (xy 37.840068 78.808336) (xy 37.952169 78.842342) (xy 38.06875 78.853824)
(xy 38.50625 78.853824) (xy 38.622831 78.842342) (xy 38.734932 78.808336) (xy 38.838244 78.753115) (xy 38.928799 78.678799)
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(xy 39.003115 78.588244) (xy 39.058336 78.484932) (xy 39.092342 78.372831) (xy 39.103824 78.25625) (xy 39.103824 77.74375)
(xy 39.092342 77.627169) (xy 39.058336 77.515068) (xy 39.003115 77.411756) (xy 38.928799 77.321201) (xy 38.838244 77.246885)
(xy 38.8145 77.234194) (xy 38.8145 77.072212) (xy 38.862023 77.024689) (xy 38.93064 76.921996) (xy 38.977905 76.807889)
(xy 39.002 76.686754) (xy 39.002 76.563246) (xy 38.977905 76.442111) (xy 38.93064 76.328004) (xy 38.902 76.285141)
(xy 38.902 73.886586) (xy 38.954805 73.876082) (xy 39.095063 73.817985) (xy 39.221293 73.733642) (xy 39.328642 73.626293)
(xy 39.412985 73.500063) (xy 39.471082 73.359805) (xy 39.5007 73.210907) (xy 39.5007 73.059093) (xy 39.471082 72.910195)
(xy 39.412985 72.769937) (xy 39.328642 72.643707) (xy 39.221293 72.536358) (xy 39.166879 72.5) (xy 39.221293 72.463642)
(xy 39.328642 72.356293) (xy 39.365 72.301879) (xy 39.401358 72.356293) (xy 39.508707 72.463642) (xy 39.634937 72.547985)
(xy 39.775195 72.606082) (xy 39.924093 72.6357) (xy 40.075907 72.6357) (xy 40.224805 72.606082) (xy 40.365063 72.547985)
(xy 40.491293 72.463642) (xy 40.598642 72.356293) (xy 40.635 72.301879)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
)
)
(filled_polygon
(pts
Improve ESD protection of DIGIO Pins
2020-02-17 20:40:35 +01:00
(xy 25.992977 73.710311) (xy 25.92436 73.813004) (xy 25.877095 73.927111) (xy 25.853 74.048246) (xy 25.853 74.171754)
(xy 25.877095 74.292889) (xy 25.92436 74.406996) (xy 25.992977 74.509689) (xy 26.080311 74.597023) (xy 26.134155 74.633)
(xy 26.068246 74.633) (xy 25.947111 74.657095) (xy 25.833004 74.70436) (xy 25.730311 74.772977) (xy 25.642977 74.860311)
(xy 25.57436 74.963004) (xy 25.527095 75.077111) (xy 25.503 75.198246) (xy 25.503 75.321754) (xy 25.527095 75.442889)
(xy 25.57436 75.556996) (xy 25.642977 75.659689) (xy 25.730311 75.747023) (xy 25.833004 75.81564) (xy 25.947111 75.862905)
(xy 26.068246 75.887) (xy 26.191754 75.887) (xy 26.312889 75.862905) (xy 26.426996 75.81564) (xy 26.469859 75.787)
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(xy 27.859649 75.787) (xy 27.850012 75.80503) (xy 27.828455 75.876095) (xy 27.821176 75.95) (xy 27.821176 76.65)
(xy 27.828455 76.723905) (xy 27.850012 76.79497) (xy 27.885019 76.860463) (xy 27.932131 76.917869) (xy 27.989537 76.964981)
(xy 28.05503 76.999988) (xy 28.126095 77.021545) (xy 28.2 77.028824) (xy 29.023 77.028824) (xy 29.023 77.149119)
(xy 29.020451 77.175) (xy 29.030626 77.278309) (xy 29.060761 77.377649) (xy 29.103133 77.456922) (xy 29.109697 77.469202)
(xy 29.175553 77.549448) (xy 29.195662 77.565951) (xy 30.984053 79.354344) (xy 31.000552 79.374448) (xy 31.080798 79.440304)
(xy 31.17235 79.489239) (xy 31.27169 79.519374) (xy 31.345972 79.52669) (xy 31.375 79.529549) (xy 31.400881 79.527)
(xy 33.160141 79.527) (xy 33.203004 79.55564) (xy 33.317111 79.602905) (xy 33.438246 79.627) (xy 33.561754 79.627)
(xy 33.682889 79.602905) (xy 33.796996 79.55564) (xy 33.899689 79.487023) (xy 33.987023 79.399689) (xy 34.05564 79.296996)
(xy 34.102905 79.182889) (xy 34.127 79.061754) (xy 34.127 78.938246) (xy 34.102905 78.817111) (xy 34.05564 78.703004)
(xy 33.987023 78.600311) (xy 33.899689 78.512977) (xy 33.796996 78.44436) (xy 33.682889 78.397095) (xy 33.561754 78.373)
(xy 33.438246 78.373) (xy 33.317111 78.397095) (xy 33.203004 78.44436) (xy 33.160141 78.473) (xy 31.593291 78.473)
(xy 30.971969 77.851679) (xy 30.99375 77.853824) (xy 31.43125 77.853824) (xy 31.547831 77.842342) (xy 31.659932 77.808336)
(xy 31.763244 77.753115) (xy 31.853799 77.678799) (xy 31.928115 77.588244) (xy 31.983336 77.484932) (xy 32 77.429999)
(xy 32.016664 77.484932) (xy 32.071885 77.588244) (xy 32.146201 77.678799) (xy 32.236756 77.753115) (xy 32.340068 77.808336)
(xy 32.452169 77.842342) (xy 32.56875 77.853824) (xy 33.00625 77.853824) (xy 33.122831 77.842342) (xy 33.234932 77.808336)
(xy 33.338244 77.753115) (xy 33.428799 77.678799) (xy 33.503115 77.588244) (xy 33.558336 77.484932) (xy 33.592342 77.372831)
(xy 33.603824 77.25625) (xy 33.603824 76.74375) (xy 33.592342 76.627169) (xy 33.558336 76.515068) (xy 33.503115 76.411756)
(xy 33.428799 76.321201) (xy 33.34204 76.25) (xy 33.428799 76.178799) (xy 33.503115 76.088244) (xy 33.558336 75.984932)
(xy 33.592342 75.872831) (xy 33.603824 75.75625) (xy 33.603824 75.24375) (xy 33.592342 75.127169) (xy 33.558336 75.015068)
(xy 33.503115 74.911756) (xy 33.428799 74.821201) (xy 33.34204 74.75) (xy 33.428799 74.678799) (xy 33.503115 74.588244)
(xy 33.558336 74.484932) (xy 33.592342 74.372831) (xy 33.603824 74.25625) (xy 33.603824 73.937) (xy 35.080533 73.937)
(xy 34.974812 74.042721) (xy 34.803602 74.298955) (xy 34.685671 74.583667) (xy 34.62555 74.885915) (xy 34.62555 75.194085)
(xy 34.685671 75.496333) (xy 34.803602 75.781045) (xy 34.974812 76.037279) (xy 35.192721 76.255188) (xy 35.448955 76.426398)
(xy 35.733667 76.544329) (xy 36.035915 76.60445) (xy 36.344085 76.60445) (xy 36.646333 76.544329) (xy 36.931045 76.426398)
(xy 37.187279 76.255188) (xy 37.405188 76.037279) (xy 37.576398 75.781045) (xy 37.694329 75.496333) (xy 37.75445 75.194085)
(xy 37.75445 74.885915) (xy 37.694329 74.583667) (xy 37.576398 74.298955) (xy 37.405188 74.042721) (xy 37.239382 73.876915)
(xy 37.384093 73.9057) (xy 37.535907 73.9057) (xy 37.684805 73.876082) (xy 37.825063 73.817985) (xy 37.848 73.802659)
(xy 37.848001 76.28514) (xy 37.81936 76.328004) (xy 37.772095 76.442111) (xy 37.748 76.563246) (xy 37.748 76.686754)
(xy 37.7605 76.749597) (xy 37.7605 77.234193) (xy 37.736756 77.246885) (xy 37.646201 77.321201) (xy 37.571885 77.411756)
(xy 37.516664 77.515068) (xy 37.5 77.570001) (xy 37.483336 77.515068) (xy 37.428115 77.411756) (xy 37.353799 77.321201)
(xy 37.263244 77.246885) (xy 37.159932 77.191664) (xy 37.047831 77.157658) (xy 36.93125 77.146176) (xy 36.49375 77.146176)
(xy 36.377169 77.157658) (xy 36.265068 77.191664) (xy 36.161756 77.246885) (xy 36.071201 77.321201) (xy 35.996885 77.411756)
(xy 35.941664 77.515068) (xy 35.907658 77.627169) (xy 35.896176 77.74375) (xy 35.896176 78.25625) (xy 35.907658 78.372831)
(xy 35.941664 78.484932) (xy 35.996885 78.588244) (xy 36.071201 78.678799) (xy 36.161756 78.753115) (xy 36.1855 78.765807)
(xy 36.185501 79.97411) (xy 36.1855 79.97412) (xy 36.185501 81.096176) (xy 35.925 81.096176) (xy 35.802323 81.108259)
(xy 35.684359 81.144042) (xy 35.575644 81.202152) (xy 35.55024 81.223) (xy 31.443069 81.223) (xy 31.399999 81.218758)
(xy 31.35693 81.223) (xy 31.356921 81.223) (xy 31.228078 81.23569) (xy 31.062763 81.285838) (xy 30.910408 81.367273)
(xy 30.776867 81.476867) (xy 30.749403 81.510332) (xy 29.536735 82.723) (xy 27.493266 82.723) (xy 27.137 82.366735)
(xy 27.137 81.7) (xy 27.161928 81.7) (xy 27.174188 81.824482) (xy 27.210498 81.94418) (xy 27.269463 82.054494)
(xy 27.348815 82.151185) (xy 27.445506 82.230537) (xy 27.55582 82.289502) (xy 27.675518 82.325812) (xy 27.8 82.338072)
(xy 28.21425 82.335) (xy 28.373 82.17625) (xy 28.373 81.027) (xy 28.627 81.027) (xy 28.627 82.17625)
(xy 28.78575 82.335) (xy 29.2 82.338072) (xy 29.324482 82.325812) (xy 29.44418 82.289502) (xy 29.554494 82.230537)
(xy 29.651185 82.151185) (xy 29.730537 82.054494) (xy 29.789502 81.94418) (xy 29.825812 81.824482) (xy 29.838072 81.7)
(xy 29.835 81.18575) (xy 29.67625 81.027) (xy 28.627 81.027) (xy 28.373 81.027) (xy 27.32375 81.027)
(xy 27.165 81.18575) (xy 27.161928 81.7) (xy 27.137 81.7) (xy 27.137 80.1) (xy 27.161928 80.1)
(xy 27.165 80.61425) (xy 27.32375 80.773) (xy 28.373 80.773) (xy 28.373 79.62375) (xy 28.627 79.62375)
(xy 28.627 80.773) (xy 29.67625 80.773) (xy 29.835 80.61425) (xy 29.838072 80.1) (xy 29.825812 79.975518)
(xy 29.789502 79.85582) (xy 29.730537 79.745506) (xy 29.651185 79.648815) (xy 29.554494 79.569463) (xy 29.44418 79.510498)
(xy 29.324482 79.474188) (xy 29.2 79.461928) (xy 28.78575 79.465) (xy 28.627 79.62375) (xy 28.373 79.62375)
(xy 28.21425 79.465) (xy 27.8 79.461928) (xy 27.675518 79.474188) (xy 27.55582 79.510498) (xy 27.445506 79.569463)
(xy 27.348815 79.648815) (xy 27.269463 79.745506) (xy 27.210498 79.85582) (xy 27.174188 79.975518) (xy 27.161928 80.1)
(xy 27.137 80.1) (xy 27.137 79.633076) (xy 27.141243 79.589999) (xy 27.135007 79.52669) (xy 27.12431 79.418078)
(xy 27.074162 79.252763) (xy 26.992727 79.100408) (xy 26.883133 78.966867) (xy 26.849669 78.939404) (xy 25.570597 77.660332)
(xy 25.543133 77.626867) (xy 25.409592 77.517273) (xy 25.257237 77.435838) (xy 25.091922 77.38569) (xy 24.963079 77.373)
(xy 24.92 77.368757) (xy 24.876921 77.373) (xy 22.301465 77.373) (xy 21.877 76.948535) (xy 21.877 73.677)
(xy 26.026288 73.677)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
)
)
(filled_polygon
(pts
(xy 51.681201 77.994701) (xy 51.765949 78.04) (xy 51.681201 78.085299) (xy 51.601065 78.151065) (xy 51.535299 78.231201)
(xy 51.48643 78.322628) (xy 51.456337 78.421832) (xy 51.446176 78.525) (xy 51.446176 78.825) (xy 51.456337 78.928168)
(xy 51.48643 79.027372) (xy 51.519098 79.08849) (xy 51.470506 79.114463) (xy 51.373815 79.193815) (xy 51.294463 79.290506)
(xy 51.235498 79.40082) (xy 51.199188 79.520518) (xy 51.186928 79.645) (xy 51.19 79.65925) (xy 51.34875 79.818)
(xy 52.723 79.818) (xy 52.723 79.798) (xy 52.977 79.798) (xy 52.977 79.818) (xy 52.997 79.818)
(xy 52.997 80.072) (xy 52.977 80.072) (xy 52.977 80.092) (xy 52.723 80.092) (xy 52.723 80.072)
(xy 51.34875 80.072) (xy 51.19 80.23075) (xy 51.186928 80.245) (xy 51.199188 80.369482) (xy 51.235498 80.48918)
(xy 51.294463 80.599494) (xy 51.373815 80.696185) (xy 51.452183 80.7605) (xy 50.765806 80.7605) (xy 50.753115 80.736756)
(xy 50.744334 80.726057) (xy 50.829494 80.680537) (xy 50.926185 80.601185) (xy 51.005537 80.504494) (xy 51.064502 80.39418)
(xy 51.100812 80.274482) (xy 51.113072 80.15) (xy 51.11 79.99825) (xy 50.95125 79.8395) (xy 50.127 79.8395)
(xy 50.127 79.8595) (xy 49.873 79.8595) (xy 49.873 79.8395) (xy 49.853 79.8395) (xy 49.853 79.5855)
(xy 49.873 79.5855) (xy 49.873 78.79875) (xy 50.127 78.79875) (xy 50.127 79.5855) (xy 50.95125 79.5855)
(xy 51.11 79.42675) (xy 51.113072 79.275) (xy 51.100812 79.150518) (xy 51.064502 79.03082) (xy 51.005537 78.920506)
(xy 50.926185 78.823815) (xy 50.829494 78.744463) (xy 50.71918 78.685498) (xy 50.599482 78.649188) (xy 50.475 78.636928)
(xy 50.28575 78.64) (xy 50.127 78.79875) (xy 49.873 78.79875) (xy 49.71425 78.64) (xy 49.525 78.636928)
(xy 49.400518 78.649188) (xy 49.297 78.68059) (xy 49.297 78.448289) (xy 49.81329 77.932) (xy 51.6048 77.932)
)
)
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(filled_polygon
(pts
(xy 59.852977 72.799689) (xy 59.940311 72.887023) (xy 60.043004 72.95564) (xy 60.157111 73.002905) (xy 60.278246 73.027)
(xy 60.401754 73.027) (xy 60.522889 73.002905) (xy 60.636996 72.95564) (xy 60.739689 72.887023) (xy 60.774712 72.852)
(xy 60.9048 72.852) (xy 60.981201 72.914701) (xy 61.065949 72.96) (xy 60.981201 73.005299) (xy 60.901065 73.071065)
(xy 60.835299 73.151201) (xy 60.78643 73.242628) (xy 60.756337 73.341832) (xy 60.746176 73.445) (xy 60.746176 73.745)
(xy 60.756337 73.848168) (xy 60.78643 73.947372) (xy 60.835299 74.038799) (xy 60.901065 74.118935) (xy 60.981201 74.184701)
(xy 61.065949 74.23) (xy 60.981201 74.275299) (xy 60.901065 74.341065) (xy 60.835299 74.421201) (xy 60.78643 74.512628)
(xy 60.756337 74.611832) (xy 60.746176 74.715) (xy 60.746176 75.015) (xy 60.756337 75.118168) (xy 60.78643 75.217372)
(xy 60.835299 75.308799) (xy 60.901065 75.388935) (xy 60.981201 75.454701) (xy 61.065949 75.5) (xy 60.981201 75.545299)
(xy 60.9048 75.608) (xy 59.807 75.608) (xy 59.807 72.730879)
)
)
(filled_polygon
(pts
(xy 39.301139 63.805139) (xy 39.340984 63.825021) (xy 39.373217 63.833819) (xy 39.401758 63.843807) (xy 39.432437 63.857021)
(xy 39.475952 63.866313) (xy 39.519216 63.876828) (xy 39.552595 63.878233) (xy 39.553126 63.878293) (xy 39.55669 63.879374)
(xy 39.604639 63.884096) (xy 39.626718 63.886584) (xy 39.630422 63.886636) (xy 39.634119 63.887) (xy 39.656409 63.887)
(xy 39.704514 63.887674) (xy 39.708169 63.887) (xy 44.171711 63.887) (xy 46.683 66.39829) (xy 46.683001 75.12171)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 46.645666 75.159045) (xy 46.625552 75.175552) (xy 46.559696 75.255798) (xy 46.525925 75.318981) (xy 46.510761 75.347351)
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(xy 46.487 75.425679) (xy 46.487 67.23588) (xy 46.489549 67.209999) (xy 46.479374 67.10669) (xy 46.449239 67.00735)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 46.400304 66.915798) (xy 46.334448 66.835552) (xy 46.314339 66.819049) (xy 44.640955 65.145666) (xy 44.624448 65.125552)
(xy 44.544202 65.059696) (xy 44.45265 65.010761) (xy 44.35331 64.980626) (xy 44.275881 64.973) (xy 44.25 64.970451)
(xy 44.224119 64.973) (xy 34.589859 64.973) (xy 34.546996 64.94436) (xy 34.540939 64.941851) (xy 35.59579 63.887)
(xy 37.632786 63.887) (xy 37.633 63.902274) (xy 37.633 63.924564) (xy 37.633364 63.928261) (xy 37.633416 63.931965)
(xy 37.635903 63.954043) (xy 37.640626 64.001993) (xy 37.641707 64.005557) (xy 37.641767 64.006087) (xy 37.643172 64.039466)
(xy 37.653683 64.082712) (xy 37.662979 64.126246) (xy 37.676197 64.156932) (xy 37.68618 64.185462) (xy 37.694979 64.217698)
(xy 37.714861 64.257543) (xy 37.733603 64.2979) (xy 37.753316 64.324872) (xy 37.769396 64.350463) (xy 37.785146 64.37993)
(xy 37.81339 64.414345) (xy 37.84065 64.449529) (xy 37.865871 64.471439) (xy 37.887243 64.492811) (xy 37.909153 64.518032)
(xy 37.944346 64.545299) (xy 37.978752 64.573535) (xy 38.008212 64.589282) (xy 38.03381 64.605366) (xy 38.060782 64.625079)
(xy 38.101139 64.643821) (xy 38.140984 64.663703) (xy 38.173217 64.672501) (xy 38.201746 64.682484) (xy 38.232429 64.695701)
(xy 38.275957 64.704996) (xy 38.319216 64.71551) (xy 38.352593 64.716915) (xy 38.382638 64.7203) (xy 38.415495 64.726358)
(xy 38.46 64.725733) (xy 38.504506 64.726358) (xy 38.537359 64.720301) (xy 38.567408 64.716915) (xy 38.600783 64.71551)
(xy 38.644023 64.705) (xy 38.68757 64.695701) (xy 38.718254 64.682484) (xy 38.746779 64.672502) (xy 38.779015 64.663703)
(xy 38.81886 64.643821) (xy 38.859217 64.625079) (xy 38.886189 64.605366) (xy 38.91178 64.589286) (xy 38.941247 64.573536)
(xy 38.975662 64.545292) (xy 39.010846 64.518032) (xy 39.032756 64.492811) (xy 39.054128 64.471439) (xy 39.079349 64.449529)
(xy 39.106616 64.414336) (xy 39.134852 64.37993) (xy 39.150599 64.35047) (xy 39.166683 64.324872) (xy 39.186396 64.2979)
(xy 39.205138 64.257543) (xy 39.22502 64.217698) (xy 39.233818 64.185465) (xy 39.243803 64.156932) (xy 39.257018 64.126253)
(xy 39.266314 64.082721) (xy 39.276827 64.039466) (xy 39.278232 64.006092) (xy 39.278292 64.005561) (xy 39.279374 64.001993)
(xy 39.284098 63.954029) (xy 39.286583 63.931974) (xy 39.286635 63.92827) (xy 39.287 63.924564) (xy 39.287 63.902266)
(xy 39.287675 63.854178) (xy 39.287 63.850517) (xy 39.287 63.798573)
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
)
)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(filled_polygon
(pts
(xy 33.69436 65.796996) (xy 33.762977 65.899689) (xy 33.850311 65.987023) (xy 33.953004 66.05564) (xy 34.067111 66.102905)
(xy 34.188246 66.127) (xy 34.311754 66.127) (xy 34.432889 66.102905) (xy 34.546996 66.05564) (xy 34.589859 66.027)
(xy 39.399121 66.027) (xy 39.330311 66.072977) (xy 39.242977 66.160311) (xy 39.17436 66.263004) (xy 39.127095 66.377111)
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(xy 39.117038 66.427672) (xy 38.375662 67.169049) (xy 38.355553 67.185552) (xy 38.302038 67.250761) (xy 38.289696 67.265799)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(xy 38.240761 67.357351) (xy 38.210626 67.456691) (xy 38.200451 67.56) (xy 38.203001 67.585891) (xy 38.203 70.526288)
(xy 38.129689 70.452977) (xy 38.026996 70.38436) (xy 37.912889 70.337095) (xy 37.791754 70.313) (xy 37.714883 70.313)
(xy 37.75445 70.114085) (xy 37.75445 69.805915) (xy 37.694329 69.503667) (xy 37.576398 69.218955) (xy 37.405188 68.962721)
(xy 37.187279 68.744812) (xy 36.931045 68.573602) (xy 36.646333 68.455671) (xy 36.344085 68.39555) (xy 36.035915 68.39555)
(xy 35.733667 68.455671) (xy 35.448955 68.573602) (xy 35.192721 68.744812) (xy 34.974812 68.962721) (xy 34.803602 69.218955)
(xy 34.685671 69.503667) (xy 34.62555 69.805915) (xy 34.62555 70.114085) (xy 34.685671 70.416333) (xy 34.803602 70.701045)
(xy 34.974812 70.957279) (xy 35.192721 71.175188) (xy 35.448955 71.346398) (xy 35.733667 71.464329) (xy 36.035915 71.52445)
(xy 36.344085 71.52445) (xy 36.646333 71.464329) (xy 36.85992 71.375859) (xy 36.777015 71.499937) (xy 36.718918 71.640195)
(xy 36.690104 71.785052) (xy 36.603189 71.726977) (xy 36.444441 71.661222) (xy 36.275914 71.6277) (xy 36.104086 71.6277)
(xy 35.935559 71.661222) (xy 35.776811 71.726977) (xy 35.633941 71.82244) (xy 35.51244 71.943941) (xy 35.416977 72.086811)
(xy 35.351222 72.245559) (xy 35.3177 72.414086) (xy 35.3177 72.585914) (xy 35.351222 72.754441) (xy 35.404472 72.883)
(xy 33.861579 72.883) (xy 33.86 72.78575) (xy 33.70125 72.627) (xy 32.9145 72.627) (xy 32.9145 72.647)
(xy 32.6605 72.647) (xy 32.6605 72.627) (xy 32.6405 72.627) (xy 32.6405 72.373) (xy 32.6605 72.373)
(xy 32.6605 72.353) (xy 32.9145 72.353) (xy 32.9145 72.373) (xy 33.70125 72.373) (xy 33.86 72.21425)
(xy 33.863072 72.025) (xy 33.850812 71.900518) (xy 33.814502 71.78082) (xy 33.755537 71.670506) (xy 33.676185 71.573815)
(xy 33.579494 71.494463) (xy 33.5588 71.483402) (xy 33.592342 71.372831) (xy 33.603824 71.25625) (xy 33.603824 70.74375)
(xy 33.592342 70.627169) (xy 33.558336 70.515068) (xy 33.503115 70.411756) (xy 33.428799 70.321201) (xy 33.34204 70.25)
(xy 33.428799 70.178799) (xy 33.503115 70.088244) (xy 33.558336 69.984932) (xy 33.592342 69.872831) (xy 33.603824 69.75625)
(xy 33.603824 69.24375) (xy 33.592342 69.127169) (xy 33.558336 69.015068) (xy 33.503115 68.911756) (xy 33.428799 68.821201)
(xy 33.34204 68.75) (xy 33.428799 68.678799) (xy 33.503115 68.588244) (xy 33.558336 68.484932) (xy 33.566559 68.457824)
(xy 33.627111 68.482905) (xy 33.748246 68.507) (xy 33.871754 68.507) (xy 33.992889 68.482905) (xy 34.106996 68.43564)
(xy 34.209689 68.367023) (xy 34.297023 68.279689) (xy 34.36564 68.176996) (xy 34.412905 68.062889) (xy 34.437 67.941754)
(xy 34.437 67.818246) (xy 34.412905 67.697111) (xy 34.36564 67.583004) (xy 34.297023 67.480311) (xy 34.209689 67.392977)
(xy 34.106996 67.32436) (xy 33.992889 67.277095) (xy 33.871754 67.253) (xy 33.748246 67.253) (xy 33.627111 67.277095)
(xy 33.513004 67.32436) (xy 33.470141 67.353) (xy 33.454896 67.353) (xy 33.428799 67.321201) (xy 33.338244 67.246885)
(xy 33.234932 67.191664) (xy 33.122831 67.157658) (xy 33.00625 67.146176) (xy 32.56875 67.146176) (xy 32.452169 67.157658)
(xy 32.340068 67.191664) (xy 32.236756 67.246885) (xy 32.232006 67.250783) (xy 33.691851 65.790939)
)
)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
)
Export gerbers with tented vias
2020-02-18 20:40:21 +01:00
(zone (net 1) (net_name Earth) (layer B.Cu) (tstamp 5E4D0C51) (hatch edge 0.508)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(connect_pads (clearance 0.25))
(min_thickness 0.254)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(polygon
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(pts
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 98 15) (xy 18 15) (xy 18 13) (xy 98 13)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
)
)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(filled_polygon
(pts
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(xy 97.598001 14.873) (xy 18.402 14.873) (xy 18.402 13.402) (xy 97.598 13.402)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
)
)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
)
Export gerbers with tented vias
2020-02-18 20:40:21 +01:00
(zone (net 1) (net_name Earth) (layer F.Cu) (tstamp 5E4D0C4E) (hatch edge 0.508)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(connect_pads (clearance 0.25))
(min_thickness 0.254)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(polygon
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(pts
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 98 15) (xy 18 15) (xy 18 13) (xy 98 13)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
)
)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(filled_polygon
(pts
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(xy 97.598001 14.873) (xy 18.402 14.873) (xy 18.402 13.402) (xy 97.598 13.402)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
)
)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
)
Export gerbers with tented vias
2020-02-18 20:40:21 +01:00
(zone (net 1) (net_name Earth) (layer B.Cu) (tstamp 5E4D0C4B) (hatch edge 0.508)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(connect_pads (clearance 0.25))
(min_thickness 0.254)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(polygon
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(pts
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 98 113) (xy 18 113) (xy 18 111) (xy 98 111)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
)
)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(filled_polygon
(pts
Add vias to erath net
2020-02-18 20:45:31 +01:00
(xy 97.598 112.598) (xy 18.402 112.598) (xy 18.402 111.127) (xy 97.598 111.127)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
)
)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
)
Export gerbers with tented vias
2020-02-18 20:40:21 +01:00
(zone (net 1) (net_name Earth) (layer F.Cu) (tstamp 5E4D0C48) (hatch edge 0.508)
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(connect_pads (clearance 0.25))
(min_thickness 0.254)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
Add temperature sensor to PCB for compensation calculation.
2019-12-25 00:20:04 +01:00
(polygon
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
(pts
Moved stuff
2019-12-27 21:36:56 +01:00
(xy 98 113) (xy 18 113) (xy 18 111) (xy 98 111)
Newest changes in schematic and a preliminary complete layout
2019-12-23 22:25:38 +01:00
)
)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(filled_polygon
(pts
Add vias to erath net
2020-02-18 20:45:31 +01:00
(xy 97.598 112.598) (xy 18.402 112.598) (xy 18.402 111.127) (xy 97.598 111.127)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
)
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
Export gerbers with tented vias
2020-02-18 20:40:21 +01:00
(zone (net 2) (net_name GND) (layer B.Cu) (tstamp 5E4D0C45) (hatch edge 0.508)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(priority 4)
(connect_pads (clearance 0.25))
(min_thickness 0.254)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(polygon
(pts
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(xy 50 104.5) (xy 52 106.5) (xy 53.5 106.5) (xy 53.5 108.5) (xy 43 108.5)
(xy 43 103) (xy 50 103)
)
)
(filled_polygon
(pts
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 48.90439 103.64968) (xy 48.867111 103.657095) (xy 48.753004 103.70436) (xy 48.650311 103.772977) (xy 48.562977 103.860311)
(xy 48.49436 103.963004) (xy 48.447095 104.077111) (xy 48.423 104.198246) (xy 48.423 104.321754) (xy 48.447095 104.442889)
(xy 48.49436 104.556996) (xy 48.562977 104.659689) (xy 48.650311 104.747023) (xy 48.697868 104.778799) (xy 48.646201 104.821201)
(xy 48.571885 104.911756) (xy 48.516664 105.015068) (xy 48.5 105.070001) (xy 48.483336 105.015068) (xy 48.428115 104.911756)
(xy 48.353799 104.821201) (xy 48.263244 104.746885) (xy 48.159932 104.691664) (xy 48.047831 104.657658) (xy 47.93125 104.646176)
(xy 47.49375 104.646176) (xy 47.377169 104.657658) (xy 47.265068 104.691664) (xy 47.161756 104.746885) (xy 47.071201 104.821201)
(xy 46.996885 104.911756) (xy 46.941664 105.015068) (xy 46.907658 105.127169) (xy 46.896176 105.24375) (xy 46.896176 105.75625)
(xy 46.907658 105.872831) (xy 46.941664 105.984932) (xy 46.996885 106.088244) (xy 47.071201 106.178799) (xy 47.161756 106.253115)
(xy 47.1855 106.265806) (xy 47.1855 106.266619) (xy 47.182951 106.2925) (xy 47.1855 106.31838) (xy 47.193126 106.395809)
(xy 47.223261 106.495149) (xy 47.272196 106.586702) (xy 47.338052 106.666948) (xy 47.358166 106.683455) (xy 47.527038 106.852327)
(xy 47.537095 106.902889) (xy 47.58436 107.016996) (xy 47.652977 107.119689) (xy 47.740311 107.207023) (xy 47.843004 107.27564)
(xy 47.957111 107.322905) (xy 48.078246 107.347) (xy 48.201754 107.347) (xy 48.322889 107.322905) (xy 48.436996 107.27564)
(xy 48.539689 107.207023) (xy 48.627023 107.119689) (xy 48.69564 107.016996) (xy 48.742905 106.902889) (xy 48.767 106.781754)
(xy 48.767 106.658246) (xy 48.742905 106.537111) (xy 48.69564 106.423004) (xy 48.627023 106.320311) (xy 48.539689 106.232977)
(xy 48.436996 106.16436) (xy 48.383749 106.142304) (xy 48.428115 106.088244) (xy 48.483336 105.984932) (xy 48.5 105.929999)
(xy 48.516664 105.984932) (xy 48.571885 106.088244) (xy 48.646201 106.178799) (xy 48.736756 106.253115) (xy 48.840068 106.308336)
(xy 48.952169 106.342342) (xy 49.06875 106.353824) (xy 49.50625 106.353824) (xy 49.622831 106.342342) (xy 49.734932 106.308336)
(xy 49.838244 106.253115) (xy 49.928799 106.178799) (xy 50.003115 106.088244) (xy 50.058336 105.984932) (xy 50.092342 105.872831)
(xy 50.103824 105.75625) (xy 50.103824 105.24375) (xy 50.092342 105.127169) (xy 50.058336 105.015068) (xy 50.003115 104.911756)
(xy 49.928799 104.821201) (xy 49.838244 104.746885) (xy 49.8145 104.734194) (xy 49.8145 104.55979) (xy 51.359054 106.104345)
(xy 51.375552 106.124448) (xy 51.455798 106.190304) (xy 51.54735 106.239239) (xy 51.564982 106.244588) (xy 51.910197 106.589803)
(xy 51.929443 106.605597) (xy 51.951399 106.617333) (xy 51.975224 106.62456) (xy 52 106.627) (xy 53.373 106.627)
(xy 53.373 108.373) (xy 43.127 108.373) (xy 43.127 103.127) (xy 48.381711 103.127)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
)
)
Export gerbers with tented vias
2020-02-18 20:40:21 +01:00
(zone (net 0) (net_name "") (layer B.Cu) (tstamp 5E4D0C42) (hatch edge 0.508)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(priority 3)
(connect_pads (clearance 0.25))
(min_thickness 0.254)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(polygon
(pts
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(xy 50 104.5) (xy 52 106.5) (xy 53.5 106.5) (xy 53.5 108.5) (xy 43 108.5)
(xy 43 103) (xy 50 103)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
)
)
(zone (net 0) (net_name "") (layer F.Cu) (tstamp 0) (hatch edge 0.508)
(connect_pads (clearance 0.25))
(min_thickness 0.254)
(keepout (tracks allowed) (vias allowed) (copperpour not_allowed))
(fill (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
(polygon
(pts
(xy 43 108) (xy 42.5 108) (xy 42.5 103.5) (xy 43 103.5)
)
)
)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(zone (net 3) (net_name +3V3) (layer B.Cu) (tstamp 5E4D0C3C) (hatch edge 0.508)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(priority 1)
(connect_pads (clearance 0.25))
(min_thickness 0.254)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(polygon
(pts
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 51.5 93) (xy 50 93) (xy 50 94.5) (xy 49 95.5) (xy 46 92.5)
(xy 47.25 91.25) (xy 51.5 91.25)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(filled_polygon
(pts
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 51.373 92.873) (xy 50 92.873) (xy 49.975224 92.87544) (xy 49.951399 92.882667) (xy 49.929443 92.894403)
(xy 49.910197 92.910197) (xy 49.894403 92.929443) (xy 49.882667 92.951399) (xy 49.87544 92.975224) (xy 49.873 93)
(xy 49.873 94.447394) (xy 49 95.320394) (xy 46.179606 92.5) (xy 47.302606 91.377) (xy 51.373 91.377)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
)
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(zone (net 3) (net_name +3V3) (layer F.Cu) (tstamp 5E4D0C36) (hatch edge 0.508)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(priority 1)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(connect_pads yes (clearance 0.25))
(min_thickness 0.254)
(fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
(polygon
(pts
(xy 40.5 84.75) (xy 39 84.75) (xy 39 82.75) (xy 37.5 82.75) (xy 37.5 81.5)
(xy 40.5 81.5)
)
)
(filled_polygon
(pts
(xy 40.373 84.623) (xy 39.127 84.623) (xy 39.127 82.75) (xy 39.12456 82.725224) (xy 39.117333 82.701399)
(xy 39.105597 82.679443) (xy 39.089803 82.660197) (xy 39.070557 82.644403) (xy 39.048601 82.632667) (xy 39.024776 82.62544)
(xy 39 82.623) (xy 37.627 82.623) (xy 37.627 81.627) (xy 40.373 81.627)
)
)
)
(zone (net 0) (net_name "") (layer F.Cu) (tstamp 5EADBC61) (hatch edge 0.508)
(connect_pads (clearance 0.25))
(min_thickness 0.254)
(keepout (tracks allowed) (vias allowed) (copperpour not_allowed))
(fill (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
(polygon
(pts
(xy 54.25 109) (xy 42.5 109) (xy 42.5 108) (xy 43 108) (xy 43 108.5)
(xy 53.75 108.5) (xy 53.75 104.75) (xy 54.25 104.75)
)
)
)
(zone (net 0) (net_name "") (layer B.Mask) (tstamp 0) (hatch edge 0.508)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(connect_pads (clearance 0.25))
(min_thickness 0.254)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(polygon
(pts
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 73.743962 40) (xy 31.5 40) (xy 31.5 38) (xy 73.743962 38)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(filled_polygon
(pts
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 73.616962 39.873) (xy 31.627 39.873) (xy 31.627 38.127) (xy 73.616962 38.127)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
)
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(zone (net 2) (net_name GND) (layer F.Cu) (tstamp 0) (hatch edge 0.508)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(priority 1)
(connect_pads (clearance 0.25))
(min_thickness 0.254)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(polygon
(pts
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 45 36.5) (xy 17 36.5) (xy 17 25) (xy 34.5 25) (xy 39.5 20.5)
(xy 45 20.5)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(filled_polygon
(pts
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 44.873 36.373) (xy 24.3145 36.373) (xy 24.3145 35.525) (xy 32.536928 35.525) (xy 32.549188 35.649482)
(xy 32.585498 35.76918) (xy 32.644463 35.879494) (xy 32.723815 35.976185) (xy 32.820506 36.055537) (xy 32.93082 36.114502)
(xy 33.050518 36.150812) (xy 33.175 36.163072) (xy 34.21425 36.16) (xy 34.373 36.00125) (xy 34.373 35.027)
(xy 34.627 35.027) (xy 34.627 36.00125) (xy 34.78575 36.16) (xy 35.825 36.163072) (xy 35.949482 36.150812)
(xy 36.06918 36.114502) (xy 36.179494 36.055537) (xy 36.276185 35.976185) (xy 36.355537 35.879494) (xy 36.414502 35.76918)
(xy 36.450812 35.649482) (xy 36.463072 35.525) (xy 36.46 35.18575) (xy 36.30125 35.027) (xy 34.627 35.027)
(xy 34.373 35.027) (xy 32.69875 35.027) (xy 32.54 35.18575) (xy 32.536928 35.525) (xy 24.3145 35.525)
(xy 24.3145 34.275) (xy 32.536928 34.275) (xy 32.54 34.61425) (xy 32.69875 34.773) (xy 34.373 34.773)
(xy 34.373 33.79875) (xy 34.627 33.79875) (xy 34.627 34.773) (xy 36.30125 34.773) (xy 36.46 34.61425)
(xy 36.463072 34.275) (xy 36.450812 34.150518) (xy 36.414502 34.03082) (xy 36.355537 33.920506) (xy 36.276185 33.823815)
(xy 36.179494 33.744463) (xy 36.06918 33.685498) (xy 35.949482 33.649188) (xy 35.825 33.636928) (xy 34.78575 33.64)
(xy 34.627 33.79875) (xy 34.373 33.79875) (xy 34.21425 33.64) (xy 33.175 33.636928) (xy 33.050518 33.649188)
(xy 32.93082 33.685498) (xy 32.820506 33.744463) (xy 32.723815 33.823815) (xy 32.644463 33.920506) (xy 32.585498 34.03082)
(xy 32.549188 34.150518) (xy 32.536928 34.275) (xy 24.3145 34.275) (xy 24.3145 33.159231) (xy 24.34497 33.149988)
(xy 24.410463 33.114981) (xy 24.467869 33.067869) (xy 24.514981 33.010463) (xy 24.549988 32.94497) (xy 24.571545 32.873905)
(xy 24.578824 32.8) (xy 24.578824 29.2) (xy 29.421176 29.2) (xy 29.421176 32.8) (xy 29.428455 32.873905)
(xy 29.450012 32.94497) (xy 29.485019 33.010463) (xy 29.532131 33.067869) (xy 29.589537 33.114981) (xy 29.65503 33.149988)
(xy 29.726095 33.171545) (xy 29.8 33.178824) (xy 32.5 33.178824) (xy 32.573905 33.171545) (xy 32.64497 33.149988)
(xy 32.710463 33.114981) (xy 32.767869 33.067869) (xy 32.814981 33.010463) (xy 32.849988 32.94497) (xy 32.871545 32.873905)
(xy 32.878824 32.8) (xy 32.878824 32.780713) (xy 32.902152 32.824356) (xy 32.980354 32.919646) (xy 33.075644 32.997848)
(xy 33.184359 33.055958) (xy 33.302323 33.091741) (xy 33.425 33.103824) (xy 35.575 33.103824) (xy 35.697677 33.091741)
(xy 35.815641 33.055958) (xy 35.924356 32.997848) (xy 36.019646 32.919646) (xy 36.097848 32.824356) (xy 36.155958 32.715641)
(xy 36.191741 32.597677) (xy 36.203824 32.475) (xy 36.203824 31.877) (xy 40.581615 31.877) (xy 40.586624 31.889093)
(xy 40.792039 32.196518) (xy 41.053482 32.457961) (xy 41.360907 32.663376) (xy 41.702499 32.804868) (xy 42.065132 32.877)
(xy 42.434868 32.877) (xy 42.797501 32.804868) (xy 43.139093 32.663376) (xy 43.446518 32.457961) (xy 43.707961 32.196518)
(xy 43.913376 31.889093) (xy 44.054868 31.547501) (xy 44.127 31.184868) (xy 44.127 30.815132) (xy 44.054868 30.452499)
(xy 43.913376 30.110907) (xy 43.707961 29.803482) (xy 43.446518 29.542039) (xy 43.139093 29.336624) (xy 42.797501 29.195132)
(xy 42.434868 29.123) (xy 42.065132 29.123) (xy 41.702499 29.195132) (xy 41.360907 29.336624) (xy 41.053482 29.542039)
(xy 40.792039 29.803482) (xy 40.586624 30.110907) (xy 40.581615 30.123) (xy 36.098573 30.123) (xy 36.155958 30.015641)
(xy 36.191741 29.897677) (xy 36.203824 29.775) (xy 36.203824 29.025) (xy 36.191741 28.902323) (xy 36.155958 28.784359)
(xy 36.097848 28.675644) (xy 36.019646 28.580354) (xy 35.924356 28.502152) (xy 35.815641 28.444042) (xy 35.697677 28.408259)
(xy 35.575 28.396176) (xy 33.425 28.396176) (xy 33.302323 28.408259) (xy 33.184359 28.444042) (xy 33.075644 28.502152)
(xy 32.980354 28.580354) (xy 32.902152 28.675644) (xy 32.844042 28.784359) (xy 32.808259 28.902323) (xy 32.80131 28.972878)
(xy 32.767869 28.932131) (xy 32.710463 28.885019) (xy 32.64497 28.850012) (xy 32.573905 28.828455) (xy 32.5 28.821176)
(xy 29.8 28.821176) (xy 29.726095 28.828455) (xy 29.65503 28.850012) (xy 29.589537 28.885019) (xy 29.532131 28.932131)
(xy 29.485019 28.989537) (xy 29.450012 29.05503) (xy 29.428455 29.126095) (xy 29.421176 29.2) (xy 24.578824 29.2)
(xy 24.571545 29.126095) (xy 24.549988 29.05503) (xy 24.514981 28.989537) (xy 24.467869 28.932131) (xy 24.410463 28.885019)
(xy 24.34497 28.850012) (xy 24.273905 28.828455) (xy 24.2 28.821176) (xy 21.5 28.821176) (xy 21.453145 28.825791)
(xy 21.463072 28.725) (xy 21.46 28.38575) (xy 21.30125 28.227) (xy 19.627 28.227) (xy 19.627 29.20125)
(xy 19.78575 29.36) (xy 20.825 29.363072) (xy 20.949482 29.350812) (xy 21.06918 29.314502) (xy 21.121176 29.286709)
(xy 21.121176 30.023) (xy 20.94976 30.023) (xy 20.924356 30.002152) (xy 20.815641 29.944042) (xy 20.697677 29.908259)
(xy 20.575 29.896176) (xy 18.425 29.896176) (xy 18.302323 29.908259) (xy 18.184359 29.944042) (xy 18.075644 30.002152)
(xy 17.980354 30.080354) (xy 17.902152 30.175644) (xy 17.844042 30.284359) (xy 17.808259 30.402323) (xy 17.796176 30.525)
(xy 17.796176 31.275) (xy 17.808259 31.397677) (xy 17.844042 31.515641) (xy 17.902152 31.624356) (xy 17.980354 31.719646)
(xy 18.075644 31.797848) (xy 18.184359 31.855958) (xy 18.302323 31.891741) (xy 18.425 31.903824) (xy 20.575 31.903824)
(xy 20.697677 31.891741) (xy 20.815641 31.855958) (xy 20.924356 31.797848) (xy 20.94976 31.777) (xy 21.121176 31.777)
(xy 21.121176 32.8) (xy 21.128455 32.873905) (xy 21.150012 32.94497) (xy 21.185019 33.010463) (xy 21.232131 33.067869)
(xy 21.289537 33.114981) (xy 21.35503 33.149988) (xy 21.426095 33.171545) (xy 21.5 33.178824) (xy 21.560501 33.178824)
(xy 21.5605 36.373) (xy 17.127 36.373) (xy 17.127 28.725) (xy 17.536928 28.725) (xy 17.549188 28.849482)
(xy 17.585498 28.96918) (xy 17.644463 29.079494) (xy 17.723815 29.176185) (xy 17.820506 29.255537) (xy 17.93082 29.314502)
(xy 18.050518 29.350812) (xy 18.175 29.363072) (xy 19.21425 29.36) (xy 19.373 29.20125) (xy 19.373 28.227)
(xy 17.69875 28.227) (xy 17.54 28.38575) (xy 17.536928 28.725) (xy 17.127 28.725) (xy 17.127 27.475)
(xy 17.536928 27.475) (xy 17.54 27.81425) (xy 17.69875 27.973) (xy 19.373 27.973) (xy 19.373 26.99875)
(xy 19.627 26.99875) (xy 19.627 27.973) (xy 21.30125 27.973) (xy 21.46 27.81425) (xy 21.463072 27.475)
(xy 21.450812 27.350518) (xy 21.414502 27.23082) (xy 21.411392 27.225) (xy 32.536928 27.225) (xy 32.549188 27.349482)
(xy 32.585498 27.46918) (xy 32.644463 27.579494) (xy 32.723815 27.676185) (xy 32.820506 27.755537) (xy 32.93082 27.814502)
(xy 33.050518 27.850812) (xy 33.175 27.863072) (xy 34.21425 27.86) (xy 34.373 27.70125) (xy 34.373 26.727)
(xy 34.627 26.727) (xy 34.627 27.70125) (xy 34.78575 27.86) (xy 35.825 27.863072) (xy 35.949482 27.850812)
(xy 36.06918 27.814502) (xy 36.179494 27.755537) (xy 36.276185 27.676185) (xy 36.355537 27.579494) (xy 36.414502 27.46918)
(xy 36.450812 27.349482) (xy 36.463072 27.225) (xy 36.46 26.88575) (xy 36.30125 26.727) (xy 34.627 26.727)
(xy 34.373 26.727) (xy 32.69875 26.727) (xy 32.54 26.88575) (xy 32.536928 27.225) (xy 21.411392 27.225)
(xy 21.355537 27.120506) (xy 21.276185 27.023815) (xy 21.179494 26.944463) (xy 21.06918 26.885498) (xy 20.949482 26.849188)
(xy 20.825 26.836928) (xy 19.78575 26.84) (xy 19.627 26.99875) (xy 19.373 26.99875) (xy 19.21425 26.84)
(xy 18.175 26.836928) (xy 18.050518 26.849188) (xy 17.93082 26.885498) (xy 17.820506 26.944463) (xy 17.723815 27.023815)
(xy 17.644463 27.120506) (xy 17.585498 27.23082) (xy 17.549188 27.350518) (xy 17.536928 27.475) (xy 17.127 27.475)
(xy 17.127 25.975) (xy 32.536928 25.975) (xy 32.54 26.31425) (xy 32.69875 26.473) (xy 34.373 26.473)
(xy 34.373 25.49875) (xy 34.627 25.49875) (xy 34.627 26.473) (xy 36.30125 26.473) (xy 36.46 26.31425)
(xy 36.463072 25.975) (xy 36.450812 25.850518) (xy 36.414502 25.73082) (xy 36.355537 25.620506) (xy 36.276185 25.523815)
(xy 36.179494 25.444463) (xy 36.06918 25.385498) (xy 35.949482 25.349188) (xy 35.825 25.336928) (xy 34.78575 25.34)
(xy 34.627 25.49875) (xy 34.373 25.49875) (xy 34.21425 25.34) (xy 33.175 25.336928) (xy 33.050518 25.349188)
(xy 32.93082 25.385498) (xy 32.820506 25.444463) (xy 32.723815 25.523815) (xy 32.644463 25.620506) (xy 32.585498 25.73082)
(xy 32.549188 25.850518) (xy 32.536928 25.975) (xy 17.127 25.975) (xy 17.127 25.127) (xy 34.5 25.127)
(xy 34.524776 25.12456) (xy 34.548601 25.117333) (xy 34.570557 25.105597) (xy 34.584959 25.094398) (xy 35.254675 24.491653)
(xy 40.937952 24.491653) (xy 41.093962 24.807214) (xy 41.468745 24.99802) (xy 41.873551 25.112044) (xy 42.292824 25.144902)
(xy 42.710451 25.095334) (xy 43.110383 24.965243) (xy 43.406038 24.807214) (xy 43.562048 24.491653) (xy 42.25 23.179605)
(xy 40.937952 24.491653) (xy 35.254675 24.491653) (xy 36.864485 23.042824) (xy 40.105098 23.042824) (xy 40.154666 23.460451)
(xy 40.284757 23.860383) (xy 40.442786 24.156038) (xy 40.758347 24.312048) (xy 42.070395 23) (xy 42.429605 23)
(xy 43.741653 24.312048) (xy 44.057214 24.156038) (xy 44.24802 23.781255) (xy 44.362044 23.376449) (xy 44.394902 22.957176)
(xy 44.345334 22.539549) (xy 44.215243 22.139617) (xy 44.057214 21.843962) (xy 43.741653 21.687952) (xy 42.429605 23)
(xy 42.070395 23) (xy 40.758347 21.687952) (xy 40.442786 21.843962) (xy 40.25198 22.218745) (xy 40.137956 22.623551)
(xy 40.105098 23.042824) (xy 36.864485 23.042824) (xy 38.56946 21.508347) (xy 40.937952 21.508347) (xy 42.25 22.820395)
(xy 43.562048 21.508347) (xy 43.406038 21.192786) (xy 43.031255 21.00198) (xy 42.626449 20.887956) (xy 42.207176 20.855098)
(xy 41.789549 20.904666) (xy 41.389617 21.034757) (xy 41.093962 21.192786) (xy 40.937952 21.508347) (xy 38.56946 21.508347)
(xy 39.548735 20.627) (xy 44.873 20.627)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
)
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(zone (net 46) (net_name +5VL) (layer F.Cu) (tstamp 0) (hatch edge 0.508)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(priority 1)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(connect_pads (clearance 0.25))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(min_thickness 0.254)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(polygon
(pts
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 43 43) (xy 39 43) (xy 39 41) (xy 43 41)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(filled_polygon
(pts
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 42.873 42.873) (xy 39.127 42.873) (xy 39.127 41.127) (xy 42.873 41.127)
)
)
)
(zone (net 46) (net_name +5VL) (layer B.Cu) (tstamp 0) (hatch edge 0.508)
(priority 1)
(connect_pads (clearance 0.25))
(min_thickness 0.254)
(fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
(polygon
(pts
(xy 43 43) (xy 39 43) (xy 39 41) (xy 43 41)
)
)
(filled_polygon
(pts
(xy 42.873 42.873) (xy 39.127 42.873) (xy 39.127 41.127) (xy 42.873 41.127)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
)
)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
Export gerbers with tented vias
2020-02-18 20:40:21 +01:00
(zone (net 2) (net_name GND) (layer B.Cu) (tstamp 5E4D0C33) (hatch edge 0.508)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(connect_pads (clearance 0.25))
(min_thickness 0.254)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
(polygon
(pts
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 73 42) (xy 83 52) (xy 83 73.5) (xy 98 73.5) (xy 98 110.5)
(xy 17 110.5) (xy 17 42) (xy 67 42)
Small fixes and improvements * Card detect pin used * Fix SD card slot * Improve routing and via placement
2020-01-03 18:34:21 +01:00
)
)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(filled_polygon
(pts
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 27.224403 42.589668) (xy 27.251867 42.623133) (xy 27.385408 42.732727) (xy 27.537763 42.814162) (xy 27.703078 42.86431)
(xy 27.831921 42.877) (xy 27.83193 42.877) (xy 27.874999 42.881242) (xy 27.918069 42.877) (xy 38.623 42.877)
(xy 38.623 43) (xy 38.630244 43.073549) (xy 38.651697 43.144272) (xy 38.686536 43.20945) (xy 38.733421 43.266579)
(xy 38.79055 43.313464) (xy 38.855728 43.348303) (xy 38.926451 43.369756) (xy 39 43.377) (xy 43 43.377)
(xy 43.073549 43.369756) (xy 43.144272 43.348303) (xy 43.20945 43.313464) (xy 43.266579 43.266579) (xy 43.313464 43.20945)
(xy 43.348303 43.144272) (xy 43.369756 43.073549) (xy 43.377 43) (xy 43.377 42.877) (xy 65.636735 42.877)
(xy 78.123 55.363265) (xy 78.123001 61.486734) (xy 77.074406 62.535329) (xy 76.992274 62.635408) (xy 76.910838 62.787764)
(xy 76.86069 62.953078) (xy 76.843757 63.125) (xy 76.86069 63.296922) (xy 76.910838 63.462236) (xy 76.992274 63.614592)
(xy 77.048 63.682494) (xy 77.048001 73.191745) (xy 77.044726 73.225) (xy 77.057796 73.357714) (xy 77.096508 73.485329)
(xy 77.159372 73.60294) (xy 77.222776 73.680198) (xy 77.222779 73.680201) (xy 77.243974 73.706027) (xy 77.2698 73.727222)
(xy 86.997778 83.455201) (xy 87.018973 83.481027) (xy 87.044799 83.502222) (xy 87.044801 83.502224) (xy 87.122059 83.565628)
(xy 87.23967 83.628492) (xy 87.367285 83.667204) (xy 87.5 83.680275) (xy 87.533252 83.677) (xy 89.32184 83.677)
(xy 89.367882 83.763139) (xy 89.538708 83.971292) (xy 89.746861 84.142118) (xy 89.984341 84.269054) (xy 90.12921 84.312999)
(xy 87.995108 86.447103) (xy 87.984932 86.441664) (xy 87.872831 86.407658) (xy 87.75625 86.396176) (xy 87.24375 86.396176)
(xy 87.127169 86.407658) (xy 87.015068 86.441664) (xy 86.911756 86.496885) (xy 86.821201 86.571201) (xy 86.746885 86.661756)
(xy 86.691664 86.765068) (xy 86.657658 86.877169) (xy 86.646176 86.99375) (xy 86.646176 87.43125) (xy 86.657658 87.547831)
(xy 86.691664 87.659932) (xy 86.746885 87.763244) (xy 86.821201 87.853799) (xy 86.911756 87.928115) (xy 87.015068 87.983336)
(xy 87.070001 88) (xy 87.015068 88.016664) (xy 86.911756 88.071885) (xy 86.821201 88.146201) (xy 86.746885 88.236756)
(xy 86.691664 88.340068) (xy 86.657658 88.452169) (xy 86.646176 88.56875) (xy 86.646176 89.00625) (xy 86.657658 89.122831)
(xy 86.691664 89.234932) (xy 86.746885 89.338244) (xy 86.821201 89.428799) (xy 86.911756 89.503115) (xy 87.015068 89.558336)
(xy 87.127169 89.592342) (xy 87.24375 89.603824) (xy 87.473001 89.603824) (xy 87.473 92.229394) (xy 87.40503 92.250012)
(xy 87.339537 92.285019) (xy 87.282131 92.332131) (xy 87.235019 92.389537) (xy 87.200012 92.45503) (xy 87.178455 92.526095)
(xy 87.171176 92.6) (xy 87.171176 93.4) (xy 87.178455 93.473905) (xy 87.200012 93.54497) (xy 87.235019 93.610463)
(xy 87.282131 93.667869) (xy 87.339537 93.714981) (xy 87.40503 93.749988) (xy 87.476095 93.771545) (xy 87.55 93.778824)
(xy 88.45 93.778824) (xy 88.523905 93.771545) (xy 88.59497 93.749988) (xy 88.660463 93.714981) (xy 88.717869 93.667869)
(xy 88.764981 93.610463) (xy 88.799988 93.54497) (xy 88.805439 93.527) (xy 89.141176 93.527) (xy 89.141176 93.99)
(xy 89.148455 94.063905) (xy 89.170012 94.13497) (xy 89.205019 94.200463) (xy 89.252131 94.257869) (xy 89.309537 94.304981)
(xy 89.37503 94.339988) (xy 89.446095 94.361545) (xy 89.52 94.368824) (xy 93.48 94.368824) (xy 93.553905 94.361545)
(xy 93.62497 94.339988) (xy 93.690463 94.304981) (xy 93.747869 94.257869) (xy 93.794981 94.200463) (xy 93.829988 94.13497)
(xy 93.851545 94.063905) (xy 93.858824 93.99) (xy 93.858824 92.01) (xy 93.851545 91.936095) (xy 93.829988 91.86503)
(xy 93.794981 91.799537) (xy 93.747869 91.742131) (xy 93.690463 91.695019) (xy 93.62497 91.660012) (xy 93.553905 91.638455)
(xy 93.48 91.631176) (xy 89.52 91.631176) (xy 89.446095 91.638455) (xy 89.37503 91.660012) (xy 89.309537 91.695019)
(xy 89.252131 91.742131) (xy 89.205019 91.799537) (xy 89.170012 91.86503) (xy 89.148455 91.936095) (xy 89.141176 92.01)
(xy 89.141176 92.473) (xy 88.805439 92.473) (xy 88.799988 92.45503) (xy 88.764981 92.389537) (xy 88.717869 92.332131)
(xy 88.660463 92.285019) (xy 88.59497 92.250012) (xy 88.527 92.229394) (xy 88.527 88.838377) (xy 88.529549 88.812499)
(xy 88.524354 88.759755) (xy 88.519374 88.70919) (xy 88.489239 88.60985) (xy 88.440304 88.518298) (xy 88.374448 88.438052)
(xy 88.360717 88.426783) (xy 88.349448 88.413052) (xy 88.324187 88.392321) (xy 88.308336 88.340068) (xy 88.253115 88.236756)
(xy 88.178799 88.146201) (xy 88.088244 88.071885) (xy 87.984932 88.016664) (xy 87.929999 88) (xy 87.984932 87.983336)
(xy 88.088244 87.928115) (xy 88.178799 87.853799) (xy 88.253115 87.763244) (xy 88.308336 87.659932) (xy 88.324187 87.607679)
(xy 88.349448 87.586948) (xy 88.365955 87.566834) (xy 91.565791 84.367) (xy 92.557152 84.367) (xy 92.757979 84.34722)
(xy 93.015659 84.269054) (xy 93.253139 84.142118) (xy 93.461292 83.971292) (xy 93.632118 83.763139) (xy 93.759054 83.525659)
(xy 93.83722 83.267979) (xy 93.863614 83) (xy 93.83722 82.732021) (xy 93.759054 82.474341) (xy 93.632118 82.236861)
(xy 93.461292 82.028708) (xy 93.253139 81.857882) (xy 93.015659 81.730946) (xy 92.757979 81.65278) (xy 92.557152 81.633)
(xy 90.442848 81.633) (xy 90.242021 81.65278) (xy 89.984341 81.730946) (xy 89.746861 81.857882) (xy 89.538708 82.028708)
(xy 89.367882 82.236861) (xy 89.32184 82.323) (xy 87.780423 82.323) (xy 78.402 72.944578) (xy 78.402 63.688265)
(xy 79.589668 62.500597) (xy 79.623133 62.473133) (xy 79.732727 62.339592) (xy 79.814162 62.187237) (xy 79.86431 62.021922)
(xy 79.877 61.893079) (xy 79.877 61.89307) (xy 79.881242 61.850001) (xy 79.877 61.806931) (xy 79.877 55.043069)
(xy 79.881242 54.999999) (xy 79.877 54.95693) (xy 79.877 54.956921) (xy 79.86431 54.828078) (xy 79.814162 54.662763)
(xy 79.732727 54.510408) (xy 79.623133 54.376867) (xy 79.589669 54.349404) (xy 67.367265 42.127) (xy 72.618436 42.127)
(xy 72.626803 42.154582) (xy 72.664132 42.224419) (xy 72.714368 42.285632) (xy 72.72971 42.298223) (xy 82.598001 52.166515)
(xy 82.598 73.480253) (xy 82.596055 73.5) (xy 82.603817 73.578806) (xy 82.626803 73.654583) (xy 82.664132 73.72442)
(xy 82.70703 73.776691) (xy 82.714368 73.785632) (xy 82.77558 73.835868) (xy 82.845417 73.873197) (xy 82.921194 73.896183)
(xy 83 73.903945) (xy 83.019747 73.902) (xy 96.480253 73.902) (xy 96.5 73.903945) (xy 96.519747 73.902)
(xy 96.578806 73.896183) (xy 96.654583 73.873197) (xy 96.72442 73.835868) (xy 96.785632 73.785632) (xy 96.835868 73.72442)
(xy 96.873197 73.654583) (xy 96.881564 73.627) (xy 96.923 73.627) (xy 96.923 86.689355) (xy 96.769939 86.642925)
(xy 96.748628 86.640826) (xy 96.56764 86.623) (xy 96.5 86.616338) (xy 96.432361 86.623) (xy 91.43236 86.623)
(xy 91.33083 86.633) (xy 90.442848 86.633) (xy 90.242021 86.65278) (xy 89.984341 86.730946) (xy 89.746861 86.857882)
(xy 89.538708 87.028708) (xy 89.367882 87.236861) (xy 89.240946 87.474341) (xy 89.16278 87.732021) (xy 89.136386 88)
(xy 89.16278 88.267979) (xy 89.240946 88.525659) (xy 89.367882 88.763139) (xy 89.538708 88.971292) (xy 89.746861 89.142118)
(xy 89.984341 89.269054) (xy 90.242021 89.34722) (xy 90.442848 89.367) (xy 91.33083 89.367) (xy 91.43236 89.377)
(xy 95.123001 89.377) (xy 95.123 94.886969) (xy 95.079664 94.900164) (xy 95.014207 94.93524) (xy 94.956851 94.982411)
(xy 94.909799 95.039866) (xy 94.409799 95.789866) (xy 94.375164 95.854664) (xy 94.353533 95.925707) (xy 94.346176 95.999604)
(xy 94.353378 96.073516) (xy 94.374861 96.144603) (xy 94.409799 96.210134) (xy 94.909799 96.960134) (xy 94.957131 97.017869)
(xy 94.999768 97.05286) (xy 92.860718 99.19191) (xy 92.543373 99.060462) (xy 91.852304 98.923) (xy 91.147696 98.923)
(xy 90.456627 99.060462) (xy 89.805655 99.330103) (xy 89.219795 99.721562) (xy 88.721562 100.219795) (xy 88.330103 100.805655)
(xy 88.060462 101.456627) (xy 87.923 102.147696) (xy 87.923 102.852304) (xy 88.060462 103.543373) (xy 88.330103 104.194345)
(xy 88.721562 104.780205) (xy 89.219795 105.278438) (xy 89.805655 105.669897) (xy 90.123001 105.801346) (xy 90.123001 106.957834)
(xy 90.123 106.957844) (xy 90.123001 110.373) (xy 18.402 110.373) (xy 18.402 108.480253) (xy 18.400313 108.463122)
(xy 18.400334 108.460076) (xy 18.399786 108.45449) (xy 18.389586 108.357441) (xy 18.382261 108.321755) (xy 18.375433 108.28596)
(xy 18.37381 108.280587) (xy 18.344954 108.187368) (xy 18.330836 108.153784) (xy 18.317185 108.119995) (xy 18.31455 108.115039)
(xy 18.268137 108.029201) (xy 18.247759 107.998989) (xy 18.227813 107.968509) (xy 18.224265 107.964159) (xy 18.162063 107.88897)
(xy 18.136198 107.863285) (xy 18.11072 107.837267) (xy 18.106395 107.833689) (xy 18.030774 107.772013) (xy 18.00039 107.751826)
(xy 17.970359 107.731263) (xy 17.965422 107.728593) (xy 17.879261 107.682781) (xy 17.845555 107.668889) (xy 17.81209 107.654545)
(xy 17.806727 107.652885) (xy 17.713309 107.62468) (xy 17.677575 107.617604) (xy 17.641926 107.610027) (xy 17.636344 107.60944)
(xy 17.539227 107.599918) (xy 17.53922 107.599918) (xy 17.519747 107.598) (xy 17.127 107.598) (xy 17.127 100.379151)
(xy 22.733 100.379151) (xy 22.733 100.620849) (xy 22.780153 100.857903) (xy 22.872647 101.081202) (xy 23.006927 101.282167)
(xy 23.177833 101.453073) (xy 23.378798 101.587353) (xy 23.602097 101.679847) (xy 23.839151 101.727) (xy 24.080849 101.727)
(xy 24.317903 101.679847) (xy 24.541202 101.587353) (xy 24.742167 101.453073) (xy 24.913073 101.282167) (xy 25.013112 101.132447)
(xy 25.011928 101.35) (xy 25.024188 101.474482) (xy 25.060498 101.59418) (xy 25.119463 101.704494) (xy 25.198815 101.801185)
(xy 25.295506 101.880537) (xy 25.40582 101.939502) (xy 25.525518 101.975812) (xy 25.65 101.988072) (xy 26.21425 101.985)
(xy 26.373 101.82625) (xy 26.373 100.627) (xy 26.627 100.627) (xy 26.627 101.82625) (xy 26.78575 101.985)
(xy 27.35 101.988072) (xy 27.474482 101.975812) (xy 27.59418 101.939502) (xy 27.704494 101.880537) (xy 27.801185 101.801185)
(xy 27.880537 101.704494) (xy 27.939502 101.59418) (xy 27.975812 101.474482) (xy 27.988072 101.35) (xy 27.986031 100.975)
(xy 28.136928 100.975) (xy 28.149188 101.099482) (xy 28.185498 101.21918) (xy 28.244463 101.329494) (xy 28.323815 101.426185)
(xy 28.420506 101.505537) (xy 28.53082 101.564502) (xy 28.650518 101.600812) (xy 28.775 101.613072) (xy 28.92675 101.61)
(xy 29.0855 101.45125) (xy 29.0855 100.627) (xy 28.29875 100.627) (xy 28.14 100.78575) (xy 28.136928 100.975)
(xy 27.986031 100.975) (xy 27.985 100.78575) (xy 27.82625 100.627) (xy 26.627 100.627) (xy 26.373 100.627)
(xy 26.353 100.627) (xy 26.353 100.373) (xy 26.373 100.373) (xy 26.373 100.353) (xy 26.627 100.353)
(xy 26.627 100.373) (xy 27.82625 100.373) (xy 27.985 100.21425) (xy 27.98603 100.025) (xy 28.136928 100.025)
(xy 28.14 100.21425) (xy 28.29875 100.373) (xy 29.0855 100.373) (xy 29.0855 99.54875) (xy 28.92675 99.39)
(xy 28.775 99.386928) (xy 28.650518 99.399188) (xy 28.53082 99.435498) (xy 28.420506 99.494463) (xy 28.323815 99.573815)
(xy 28.244463 99.670506) (xy 28.185498 99.78082) (xy 28.149188 99.900518) (xy 28.136928 100.025) (xy 27.98603 100.025)
(xy 27.988072 99.65) (xy 27.975812 99.525518) (xy 27.939502 99.40582) (xy 27.880537 99.295506) (xy 27.801185 99.198815)
(xy 27.704494 99.119463) (xy 27.59418 99.060498) (xy 27.474482 99.024188) (xy 27.35 99.011928) (xy 27.341443 99.011975)
(xy 27.348792 98.988397) (xy 26.5 98.139605) (xy 25.651208 98.988397) (xy 25.658557 99.011975) (xy 25.65 99.011928)
(xy 25.525518 99.024188) (xy 25.40582 99.060498) (xy 25.295506 99.119463) (xy 25.198815 99.198815) (xy 25.119463 99.295506)
(xy 25.060498 99.40582) (xy 25.024188 99.525518) (xy 25.011928 99.65) (xy 25.013112 99.867553) (xy 24.913073 99.717833)
(xy 24.742167 99.546927) (xy 24.541202 99.412647) (xy 24.317903 99.320153) (xy 24.080849 99.273) (xy 23.839151 99.273)
(xy 23.602097 99.320153) (xy 23.378798 99.412647) (xy 23.177833 99.546927) (xy 23.006927 99.717833) (xy 22.872647 99.918798)
(xy 22.780153 100.142097) (xy 22.733 100.379151) (xy 17.127 100.379151) (xy 17.127 97.839151) (xy 22.733 97.839151)
(xy 22.733 98.080849) (xy 22.780153 98.317903) (xy 22.872647 98.541202) (xy 23.006927 98.742167) (xy 23.177833 98.913073)
(xy 23.378798 99.047353) (xy 23.602097 99.139847) (xy 23.839151 99.187) (xy 24.080849 99.187) (xy 24.317903 99.139847)
(xy 24.541202 99.047353) (xy 24.742167 98.913073) (xy 24.913073 98.742167) (xy 25.047353 98.541202) (xy 25.092152 98.433049)
(xy 25.149081 98.593747) (xy 25.222528 98.731157) (xy 25.471603 98.808792) (xy 26.320395 97.96) (xy 26.679605 97.96)
(xy 27.528397 98.808792) (xy 27.777472 98.731157) (xy 27.903371 98.467117) (xy 27.975339 98.183589) (xy 27.990611 97.891469)
(xy 27.948599 97.601981) (xy 27.850919 97.326253) (xy 27.777472 97.188843) (xy 27.528397 97.111208) (xy 26.679605 97.96)
(xy 26.320395 97.96) (xy 25.471603 97.111208) (xy 25.222528 97.188843) (xy 25.096629 97.452883) (xy 25.089566 97.480709)
(xy 25.047353 97.378798) (xy 24.913073 97.177833) (xy 24.742167 97.006927) (xy 24.541202 96.872647) (xy 24.317903 96.780153)
(xy 24.080849 96.733) (xy 23.839151 96.733) (xy 23.602097 96.780153) (xy 23.378798 96.872647) (xy 23.177833 97.006927)
(xy 23.006927 97.177833) (xy 22.872647 97.378798) (xy 22.780153 97.602097) (xy 22.733 97.839151) (xy 17.127 97.839151)
(xy 17.127 95.299151) (xy 22.733 95.299151) (xy 22.733 95.540849) (xy 22.780153 95.777903) (xy 22.872647 96.001202)
(xy 23.006927 96.202167) (xy 23.177833 96.373073) (xy 23.378798 96.507353) (xy 23.602097 96.599847) (xy 23.839151 96.647)
(xy 24.080849 96.647) (xy 24.317903 96.599847) (xy 24.541202 96.507353) (xy 24.629436 96.448397) (xy 25.651208 96.448397)
(xy 25.726514 96.69) (xy 25.651208 96.931603) (xy 26.5 97.780395) (xy 27.348792 96.931603) (xy 27.273486 96.69)
(xy 27.348792 96.448397) (xy 26.5 95.599605) (xy 25.651208 96.448397) (xy 24.629436 96.448397) (xy 24.742167 96.373073)
(xy 24.913073 96.202167) (xy 25.047353 96.001202) (xy 25.092152 95.893049) (xy 25.149081 96.053747) (xy 25.222528 96.191157)
(xy 25.471603 96.268792) (xy 26.320395 95.42) (xy 26.679605 95.42) (xy 27.528397 96.268792) (xy 27.777472 96.191157)
(xy 27.880539 95.975) (xy 28.136928 95.975) (xy 28.149188 96.099482) (xy 28.185498 96.21918) (xy 28.244463 96.329494)
(xy 28.323815 96.426185) (xy 28.420506 96.505537) (xy 28.53082 96.564502) (xy 28.650518 96.600812) (xy 28.775 96.613072)
(xy 28.92675 96.61) (xy 29.0855 96.45125) (xy 29.0855 95.627) (xy 28.29875 95.627) (xy 28.14 95.78575)
(xy 28.136928 95.975) (xy 27.880539 95.975) (xy 27.903371 95.927117) (xy 27.975339 95.643589) (xy 27.990611 95.351469)
(xy 27.948599 95.061981) (xy 27.850919 94.786253) (xy 27.777472 94.648843) (xy 27.528397 94.571208) (xy 26.679605 95.42)
(xy 26.320395 95.42) (xy 25.471603 94.571208) (xy 25.222528 94.648843) (xy 25.096629 94.912883) (xy 25.089566 94.940709)
(xy 25.047353 94.838798) (xy 24.913073 94.637833) (xy 24.742167 94.466927) (xy 24.541202 94.332647) (xy 24.317903 94.240153)
(xy 24.080849 94.193) (xy 23.839151 94.193) (xy 23.602097 94.240153) (xy 23.378798 94.332647) (xy 23.177833 94.466927)
(xy 23.006927 94.637833) (xy 22.872647 94.838798) (xy 22.780153 95.062097) (xy 22.733 95.299151) (xy 17.127 95.299151)
(xy 17.127 77.013623) (xy 17.623 77.013623) (xy 17.623 77.186377) (xy 17.656703 77.355811) (xy 17.722813 77.515415)
(xy 17.81879 77.659055) (xy 17.940945 77.78121) (xy 18.084585 77.877187) (xy 18.244189 77.943297) (xy 18.413623 77.977)
(xy 18.586377 77.977) (xy 18.755811 77.943297) (xy 18.915415 77.877187) (xy 19.059055 77.78121) (xy 19.18121 77.659055)
(xy 19.277187 77.515415) (xy 19.308001 77.441024) (xy 19.308 81.521355) (xy 19.304726 81.5546) (xy 19.308 81.587845)
(xy 19.308 81.587851) (xy 19.317537 81.684684) (xy 19.317796 81.687314) (xy 19.356508 81.814929) (xy 19.419372 81.93254)
(xy 19.482001 82.008853) (xy 19.503973 82.035626) (xy 19.5298 82.056822) (xy 23.283001 85.810024) (xy 23.283 87.993251)
(xy 23.283001 87.993261) (xy 23.283 89.316657) (xy 23.177833 89.386927) (xy 23.006927 89.557833) (xy 22.872647 89.758798)
(xy 22.780153 89.982097) (xy 22.733 90.219151) (xy 22.733 90.460849) (xy 22.780153 90.697903) (xy 22.872647 90.921202)
(xy 23.006927 91.122167) (xy 23.177833 91.293073) (xy 23.378798 91.427353) (xy 23.602097 91.519847) (xy 23.839151 91.567)
(xy 23.991711 91.567) (xy 24.07771 91.653) (xy 23.839151 91.653) (xy 23.602097 91.700153) (xy 23.378798 91.792647)
(xy 23.177833 91.926927) (xy 23.006927 92.097833) (xy 22.872647 92.298798) (xy 22.780153 92.522097) (xy 22.733 92.759151)
(xy 22.733 93.000849) (xy 22.780153 93.237903) (xy 22.872647 93.461202) (xy 23.006927 93.662167) (xy 23.177833 93.833073)
(xy 23.378798 93.967353) (xy 23.602097 94.059847) (xy 23.839151 94.107) (xy 24.080849 94.107) (xy 24.317903 94.059847)
(xy 24.541202 93.967353) (xy 24.629436 93.908397) (xy 25.651208 93.908397) (xy 25.726514 94.15) (xy 25.651208 94.391603)
(xy 26.5 95.240395) (xy 27.348792 94.391603) (xy 27.273486 94.15) (xy 27.348792 93.908397) (xy 26.5 93.059605)
(xy 25.651208 93.908397) (xy 24.629436 93.908397) (xy 24.742167 93.833073) (xy 24.913073 93.662167) (xy 25.047353 93.461202)
(xy 25.092152 93.353049) (xy 25.149081 93.513747) (xy 25.222528 93.651157) (xy 25.471603 93.728792) (xy 26.320395 92.88)
(xy 26.306253 92.865858) (xy 26.485858 92.686253) (xy 26.5 92.700395) (xy 26.514143 92.686253) (xy 26.693748 92.865858)
(xy 26.679605 92.88) (xy 27.528397 93.728792) (xy 27.777472 93.651157) (xy 27.903371 93.387117) (xy 27.975339 93.103589)
(xy 27.990611 92.811469) (xy 27.948599 92.521981) (xy 27.850919 92.246253) (xy 27.787177 92.127) (xy 28.00603 92.127)
(xy 28.6855 92.705559) (xy 28.6855 92.734194) (xy 28.661756 92.746885) (xy 28.571201 92.821201) (xy 28.496885 92.911756)
(xy 28.441664 93.015068) (xy 28.407658 93.127169) (xy 28.396176 93.24375) (xy 28.396176 93.75625) (xy 28.407658 93.872831)
(xy 28.441664 93.984932) (xy 28.496885 94.088244) (xy 28.571201 94.178799) (xy 28.655665 94.248116) (xy 28.627095 94.317089)
(xy 28.608212 94.412021) (xy 28.53082 94.435498) (xy 28.420506 94.494463) (xy 28.323815 94.573815) (xy 28.244463 94.670506)
(xy 28.185498 94.78082) (xy 28.149188 94.900518) (xy 28.136928 95.025) (xy 28.14 95.21425) (xy 28.29875 95.373)
(xy 29.0855 95.373) (xy 29.0855 95.353) (xy 29.3395 95.353) (xy 29.3395 95.373) (xy 29.3595 95.373)
(xy 29.3595 95.627) (xy 29.3395 95.627) (xy 29.3395 96.45125) (xy 29.49825 96.61) (xy 29.65 96.613072)
(xy 29.774482 96.600812) (xy 29.89418 96.564502) (xy 30.004494 96.505537) (xy 30.101185 96.426185) (xy 30.180537 96.329494)
(xy 30.226057 96.244334) (xy 30.236756 96.253115) (xy 30.340068 96.308336) (xy 30.452169 96.342342) (xy 30.56875 96.353824)
(xy 31.00625 96.353824) (xy 31.122831 96.342342) (xy 31.234932 96.308336) (xy 31.338244 96.253115) (xy 31.428799 96.178799)
(xy 31.485306 96.109944) (xy 31.546927 96.202167) (xy 31.717833 96.373073) (xy 31.918798 96.507353) (xy 32.036798 96.556231)
(xy 31.868748 96.615843) (xy 31.618645 96.764822) (xy 31.402412 96.959731) (xy 31.228359 97.19308) (xy 31.103175 97.455901)
(xy 31.058524 97.60311) (xy 31.179845 97.833) (xy 32.373 97.833) (xy 32.373 97.813) (xy 32.627 97.813)
(xy 32.627 97.833) (xy 33.820155 97.833) (xy 33.940213 97.605503) (xy 38.34771 102.013) (xy 34.758291 102.013)
(xy 33.657395 100.912106) (xy 33.679847 100.857903) (xy 33.727 100.620849) (xy 33.727 100.379151) (xy 33.679847 100.142097)
(xy 33.587353 99.918798) (xy 33.453073 99.717833) (xy 33.282167 99.546927) (xy 33.081202 99.412647) (xy 32.963202 99.363769)
(xy 33.131252 99.304157) (xy 33.381355 99.155178) (xy 33.597588 98.960269) (xy 33.771641 98.72692) (xy 33.896825 98.464099)
(xy 33.941476 98.31689) (xy 33.820155 98.087) (xy 32.627 98.087) (xy 32.627 98.107) (xy 32.373 98.107)
(xy 32.373 98.087) (xy 31.179845 98.087) (xy 31.058524 98.31689) (xy 31.103175 98.464099) (xy 31.228359 98.72692)
(xy 31.402412 98.960269) (xy 31.618645 99.155178) (xy 31.868748 99.304157) (xy 32.036798 99.363769) (xy 31.918798 99.412647)
(xy 31.717833 99.546927) (xy 31.546927 99.717833) (xy 31.455841 99.854153) (xy 31.428799 99.821201) (xy 31.338244 99.746885)
(xy 31.234932 99.691664) (xy 31.122831 99.657658) (xy 31.00625 99.646176) (xy 30.56875 99.646176) (xy 30.452169 99.657658)
(xy 30.340068 99.691664) (xy 30.236756 99.746885) (xy 30.226057 99.755666) (xy 30.180537 99.670506) (xy 30.101185 99.573815)
(xy 30.004494 99.494463) (xy 29.89418 99.435498) (xy 29.774482 99.399188) (xy 29.65 99.386928) (xy 29.49825 99.39)
(xy 29.3395 99.54875) (xy 29.3395 100.373) (xy 29.3595 100.373) (xy 29.3595 100.627) (xy 29.3395 100.627)
(xy 29.3395 101.45125) (xy 29.49825 101.61) (xy 29.65 101.613072) (xy 29.774482 101.600812) (xy 29.89418 101.564502)
(xy 30.004494 101.505537) (xy 30.101185 101.426185) (xy 30.180537 101.329494) (xy 30.226057 101.244334) (xy 30.236756 101.253115)
(xy 30.260501 101.265807) (xy 30.2605 101.734193) (xy 30.236756 101.746885) (xy 30.146201 101.821201) (xy 30.071885 101.911756)
(xy 30.016664 102.015068) (xy 30 102.070001) (xy 29.983336 102.015068) (xy 29.928115 101.911756) (xy 29.853799 101.821201)
(xy 29.763244 101.746885) (xy 29.659932 101.691664) (xy 29.547831 101.657658) (xy 29.43125 101.646176) (xy 28.99375 101.646176)
(xy 28.877169 101.657658) (xy 28.765068 101.691664) (xy 28.661756 101.746885) (xy 28.571201 101.821201) (xy 28.496885 101.911756)
(xy 28.441664 102.015068) (xy 28.407658 102.127169) (xy 28.396176 102.24375) (xy 28.396176 102.75625) (xy 28.407658 102.872831)
(xy 28.441664 102.984932) (xy 28.496885 103.088244) (xy 28.571201 103.178799) (xy 28.661756 103.253115) (xy 28.685501 103.265807)
(xy 28.685501 103.296398) (xy 28.65436 103.343004) (xy 28.607095 103.457111) (xy 28.583 103.578246) (xy 28.583 103.701754)
(xy 28.607095 103.822889) (xy 28.65436 103.936996) (xy 28.722977 104.039689) (xy 28.810311 104.127023) (xy 28.913004 104.19564)
(xy 29.027111 104.242905) (xy 29.077673 104.252962) (xy 32.429049 107.604339) (xy 32.445552 107.624448) (xy 32.525798 107.690304)
(xy 32.61735 107.739239) (xy 32.71669 107.769374) (xy 32.82 107.779549) (xy 32.845881 107.777) (xy 33.410141 107.777)
(xy 33.453004 107.80564) (xy 33.567111 107.852905) (xy 33.688246 107.877) (xy 33.811754 107.877) (xy 33.932889 107.852905)
(xy 34.046996 107.80564) (xy 34.089859 107.777) (xy 37.160141 107.777) (xy 37.203004 107.80564) (xy 37.317111 107.852905)
(xy 37.438246 107.877) (xy 37.561754 107.877) (xy 37.682889 107.852905) (xy 37.796996 107.80564) (xy 37.899689 107.737023)
(xy 37.987023 107.649689) (xy 38.05564 107.546996) (xy 38.102905 107.432889) (xy 38.127 107.311754) (xy 38.127 107.188246)
(xy 38.102905 107.067111) (xy 38.05564 106.953004) (xy 37.987023 106.850311) (xy 37.899689 106.762977) (xy 37.796996 106.69436)
(xy 37.682889 106.647095) (xy 37.561754 106.623) (xy 37.438246 106.623) (xy 37.317111 106.647095) (xy 37.203004 106.69436)
(xy 37.160141 106.723) (xy 34.089859 106.723) (xy 34.046996 106.69436) (xy 33.932889 106.647095) (xy 33.811754 106.623)
(xy 33.688246 106.623) (xy 33.567111 106.647095) (xy 33.453004 106.69436) (xy 33.410141 106.723) (xy 33.03829 106.723)
(xy 29.822962 103.507673) (xy 29.812905 103.457111) (xy 29.76564 103.343004) (xy 29.7395 103.303883) (xy 29.7395 103.265806)
(xy 29.763244 103.253115) (xy 29.853799 103.178799) (xy 29.928115 103.088244) (xy 29.983336 102.984932) (xy 30 102.929999)
(xy 30.016664 102.984932) (xy 30.071885 103.088244) (xy 30.146201 103.178799) (xy 30.236756 103.253115) (xy 30.340068 103.308336)
(xy 30.452169 103.342342) (xy 30.56875 103.353824) (xy 31.00625 103.353824) (xy 31.122831 103.342342) (xy 31.234932 103.308336)
(xy 31.338244 103.253115) (xy 31.428799 103.178799) (xy 31.503115 103.088244) (xy 31.558336 102.984932) (xy 31.592342 102.872831)
(xy 31.603824 102.75625) (xy 31.603824 102.24375) (xy 31.592342 102.127169) (xy 31.558336 102.015068) (xy 31.503115 101.911756)
(xy 31.428799 101.821201) (xy 31.338244 101.746885) (xy 31.3145 101.734194) (xy 31.3145 101.265806) (xy 31.338244 101.253115)
(xy 31.428799 101.178799) (xy 31.455841 101.145847) (xy 31.546927 101.282167) (xy 31.717833 101.453073) (xy 31.918798 101.587353)
(xy 32.142097 101.679847) (xy 32.379151 101.727) (xy 32.620849 101.727) (xy 32.857903 101.679847) (xy 32.912106 101.657395)
(xy 34.149054 102.894344) (xy 34.165552 102.914448) (xy 34.245798 102.980304) (xy 34.33735 103.029239) (xy 34.397053 103.04735)
(xy 34.43669 103.059374) (xy 34.54 103.069549) (xy 34.565881 103.067) (xy 42.623 103.067) (xy 42.623 108.5)
(xy 42.630244 108.573549) (xy 42.651697 108.644272) (xy 42.686536 108.70945) (xy 42.733421 108.766579) (xy 42.79055 108.813464)
(xy 42.855728 108.848303) (xy 42.926451 108.869756) (xy 43 108.877) (xy 53.5 108.877) (xy 53.573549 108.869756)
(xy 53.644272 108.848303) (xy 53.70945 108.813464) (xy 53.766579 108.766579) (xy 53.813464 108.70945) (xy 53.848303 108.644272)
(xy 53.869756 108.573549) (xy 53.877 108.5) (xy 53.877 106.5) (xy 53.869756 106.426451) (xy 53.848303 106.355728)
(xy 53.813464 106.29055) (xy 53.802344 106.277) (xy 55.974119 106.277) (xy 56 106.279549) (xy 56.025881 106.277)
(xy 56.10331 106.269374) (xy 56.20265 106.239239) (xy 56.294202 106.190304) (xy 56.374448 106.124448) (xy 56.383323 106.113633)
(xy 56.397095 106.182869) (xy 56.44436 106.296976) (xy 56.512977 106.399669) (xy 56.600311 106.487003) (xy 56.703004 106.55562)
(xy 56.817111 106.602885) (xy 56.938246 106.62698) (xy 57.061754 106.62698) (xy 57.182889 106.602885) (xy 57.296996 106.55562)
(xy 57.399689 106.487003) (xy 57.487023 106.399669) (xy 57.55564 106.296976) (xy 57.581545 106.234436) (xy 58.38785 105.428131)
(xy 58.409974 105.409974) (xy 58.482079 105.322115) (xy 58.535657 105.221876) (xy 58.56865 105.113112) (xy 58.579791 105)
(xy 58.577 104.971664) (xy 58.577 103.435429) (xy 58.602905 103.372889) (xy 58.627 103.251754) (xy 58.627 103.128246)
(xy 58.621363 103.099907) (xy 58.63918 103.094502) (xy 58.749494 103.035537) (xy 58.846185 102.956185) (xy 58.925537 102.859494)
(xy 58.984502 102.74918) (xy 59.020812 102.629482) (xy 59.033072 102.505) (xy 59.03 102.31575) (xy 58.87125 102.157)
(xy 58.0845 102.157) (xy 58.0845 102.177) (xy 57.8305 102.177) (xy 57.8305 102.157) (xy 57.8105 102.157)
(xy 57.8105 101.903) (xy 57.8305 101.903) (xy 57.8305 101.07875) (xy 58.0845 101.07875) (xy 58.0845 101.903)
(xy 58.87125 101.903) (xy 59.03 101.74425) (xy 59.033072 101.555) (xy 59.020812 101.430518) (xy 58.984502 101.31082)
(xy 58.925537 101.200506) (xy 58.846185 101.103815) (xy 58.749494 101.024463) (xy 58.63918 100.965498) (xy 58.519482 100.929188)
(xy 58.395 100.916928) (xy 58.24325 100.92) (xy 58.0845 101.07875) (xy 57.8305 101.07875) (xy 57.67175 100.92)
(xy 57.52 100.916928) (xy 57.395518 100.929188) (xy 57.27582 100.965498) (xy 57.165506 101.024463) (xy 57.068815 101.103815)
(xy 56.989463 101.200506) (xy 56.943943 101.285666) (xy 56.933244 101.276885) (xy 56.829932 101.221664) (xy 56.717831 101.187658)
(xy 56.60125 101.176176) (xy 56.16375 101.176176) (xy 56.047169 101.187658) (xy 55.935068 101.221664) (xy 55.831756 101.276885)
(xy 55.741201 101.351201) (xy 55.666885 101.441756) (xy 55.611664 101.545068) (xy 55.577658 101.657169) (xy 55.566176 101.77375)
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(xy 55.566176 102.28625) (xy 55.577658 102.402831) (xy 55.611664 102.514932) (xy 55.666885 102.618244) (xy 55.741201 102.708799)
(xy 55.831756 102.783115) (xy 55.935068 102.838336) (xy 56.047169 102.872342) (xy 56.057343 102.873344) (xy 56.761961 103.577962)
(xy 56.780026 103.599974) (xy 56.867885 103.672079) (xy 56.968124 103.725657) (xy 57.076888 103.75865) (xy 57.161664 103.767)
(xy 57.16167 103.767) (xy 57.189999 103.76979) (xy 57.218328 103.767) (xy 57.423 103.767) (xy 57.423001 104.760978)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 57.355222 104.828757) (xy 57.352905 104.817111) (xy 57.30564 104.703004) (xy 57.237023 104.600311) (xy 57.149689 104.512977)
(xy 57.046996 104.44436) (xy 56.932889 104.397095) (xy 56.811754 104.373) (xy 56.688246 104.373) (xy 56.567111 104.397095)
(xy 56.453004 104.44436) (xy 56.350311 104.512977) (xy 56.262977 104.600311) (xy 56.19436 104.703004) (xy 56.147095 104.817111)
(xy 56.137038 104.867673) (xy 55.781711 105.223) (xy 54.772289 105.223) (xy 55.382328 104.612962) (xy 55.432889 104.602905)
(xy 55.546996 104.55564) (xy 55.649689 104.487023) (xy 55.737023 104.399689) (xy 55.80564 104.296996) (xy 55.852905 104.182889)
(xy 55.877 104.061754) (xy 55.877 103.938246) (xy 55.852905 103.817111) (xy 55.80564 103.703004) (xy 55.737023 103.600311)
(xy 55.649689 103.512977) (xy 55.546996 103.44436) (xy 55.432889 103.397095) (xy 55.311754 103.373) (xy 55.188246 103.373)
(xy 55.067111 103.397095) (xy 54.953004 103.44436) (xy 54.850311 103.512977) (xy 54.762977 103.600311) (xy 54.69436 103.703004)
(xy 54.647095 103.817111) (xy 54.637038 103.867672) (xy 54.031711 104.473) (xy 52.218291 104.473) (xy 49.160955 101.415666)
(xy 49.144448 101.395552) (xy 49.064202 101.329696) (xy 48.97265 101.280761) (xy 48.87331 101.250626) (xy 48.795881 101.243)
(xy 48.77 101.240451) (xy 48.744119 101.243) (xy 39.06829 101.243) (xy 34.80029 96.975) (xy 43.136928 96.975)
(xy 43.149188 97.099482) (xy 43.185498 97.21918) (xy 43.244463 97.329494) (xy 43.323815 97.426185) (xy 43.420506 97.505537)
(xy 43.53082 97.564502) (xy 43.650518 97.600812) (xy 43.775 97.613072) (xy 43.92675 97.61) (xy 44.0855 97.45125)
(xy 44.0855 96.627) (xy 43.29875 96.627) (xy 43.14 96.78575) (xy 43.136928 96.975) (xy 34.80029 96.975)
(xy 33.85029 96.025) (xy 43.136928 96.025) (xy 43.14 96.21425) (xy 43.29875 96.373) (xy 44.0855 96.373)
(xy 44.0855 95.54875) (xy 44.3395 95.54875) (xy 44.3395 96.373) (xy 44.3595 96.373) (xy 44.3595 96.627)
(xy 44.3395 96.627) (xy 44.3395 97.45125) (xy 44.49825 97.61) (xy 44.65 97.613072) (xy 44.774482 97.600812)
(xy 44.89418 97.564502) (xy 45.004494 97.505537) (xy 45.101185 97.426185) (xy 45.180537 97.329494) (xy 45.226057 97.244334)
(xy 45.236756 97.253115) (xy 45.340068 97.308336) (xy 45.452169 97.342342) (xy 45.473 97.344394) (xy 45.473 97.660141)
(xy 45.44436 97.703004) (xy 45.397095 97.817111) (xy 45.373 97.938246) (xy 45.373 98.061754) (xy 45.397095 98.182889)
(xy 45.44436 98.296996) (xy 45.512977 98.399689) (xy 45.600311 98.487023) (xy 45.703004 98.55564) (xy 45.817111 98.602905)
(xy 45.938246 98.627) (xy 46.061754 98.627) (xy 46.182889 98.602905) (xy 46.296996 98.55564) (xy 46.399689 98.487023)
(xy 46.487023 98.399689) (xy 46.55564 98.296996) (xy 46.602905 98.182889) (xy 46.627 98.061754) (xy 46.627 97.938246)
(xy 46.602905 97.817111) (xy 46.55564 97.703004) (xy 46.527 97.660141) (xy 46.527 97.188246) (xy 46.623 97.188246)
(xy 46.623 97.311754) (xy 46.647095 97.432889) (xy 46.69436 97.546996) (xy 46.762977 97.649689) (xy 46.850311 97.737023)
(xy 46.953004 97.80564) (xy 47.067111 97.852905) (xy 47.117673 97.862962) (xy 48.293 99.03829) (xy 48.293001 99.41014)
(xy 48.26436 99.453004) (xy 48.217095 99.567111) (xy 48.193 99.688246) (xy 48.193 99.811754) (xy 48.217095 99.932889)
(xy 48.26436 100.046996) (xy 48.332977 100.149689) (xy 48.420311 100.237023) (xy 48.523004 100.30564) (xy 48.637111 100.352905)
(xy 48.758246 100.377) (xy 48.881754 100.377) (xy 49.002889 100.352905) (xy 49.116996 100.30564) (xy 49.219689 100.237023)
(xy 49.306712 100.15) (xy 49.636928 100.15) (xy 49.649188 100.274482) (xy 49.685498 100.39418) (xy 49.744463 100.504494)
(xy 49.823815 100.601185) (xy 49.920506 100.680537) (xy 50.005666 100.726057) (xy 49.996885 100.736756) (xy 49.941664 100.840068)
(xy 49.907658 100.952169) (xy 49.896176 101.06875) (xy 49.896176 101.50625) (xy 49.907658 101.622831) (xy 49.941664 101.734932)
(xy 49.996885 101.838244) (xy 50.071201 101.928799) (xy 50.161756 102.003115) (xy 50.265068 102.058336) (xy 50.377169 102.092342)
(xy 50.49375 102.103824) (xy 50.821035 102.103824) (xy 52.146349 103.429139) (xy 52.147095 103.432889) (xy 52.19436 103.546996)
(xy 52.262977 103.649689) (xy 52.350311 103.737023) (xy 52.453004 103.80564) (xy 52.567111 103.852905) (xy 52.688246 103.877)
(xy 52.811754 103.877) (xy 52.932889 103.852905) (xy 53.046996 103.80564) (xy 53.149689 103.737023) (xy 53.237023 103.649689)
(xy 53.30564 103.546996) (xy 53.352905 103.432889) (xy 53.377 103.311754) (xy 53.377 103.188246) (xy 53.352905 103.067111)
(xy 53.30564 102.953004) (xy 53.237023 102.850311) (xy 53.149689 102.762977) (xy 53.046996 102.69436) (xy 52.932889 102.647095)
(xy 52.835516 102.627727) (xy 52.561614 102.353824) (xy 52.93125 102.353824) (xy 53.047831 102.342342) (xy 53.159932 102.308336)
(xy 53.263244 102.253115) (xy 53.273943 102.244334) (xy 53.319463 102.329494) (xy 53.398815 102.426185) (xy 53.495506 102.505537)
(xy 53.60582 102.564502) (xy 53.725518 102.600812) (xy 53.85 102.613072) (xy 54.00175 102.61) (xy 54.1605 102.45125)
(xy 54.1605 101.627) (xy 54.4145 101.627) (xy 54.4145 102.45125) (xy 54.57325 102.61) (xy 54.725 102.613072)
(xy 54.849482 102.600812) (xy 54.96918 102.564502) (xy 55.079494 102.505537) (xy 55.176185 102.426185) (xy 55.255537 102.329494)
(xy 55.314502 102.21918) (xy 55.350812 102.099482) (xy 55.363072 101.975) (xy 55.36 101.78575) (xy 55.20125 101.627)
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(xy 54.4145 101.627) (xy 54.1605 101.627) (xy 54.1405 101.627) (xy 54.1405 101.373) (xy 54.1605 101.373)
(xy 54.1605 100.54875) (xy 54.4145 100.54875) (xy 54.4145 101.373) (xy 55.20125 101.373) (xy 55.36 101.21425)
(xy 55.363072 101.025) (xy 55.350812 100.900518) (xy 55.314502 100.78082) (xy 55.255537 100.670506) (xy 55.176185 100.573815)
(xy 55.079494 100.494463) (xy 54.96918 100.435498) (xy 54.849482 100.399188) (xy 54.725 100.386928) (xy 54.57325 100.39)
(xy 54.4145 100.54875) (xy 54.1605 100.54875) (xy 54.00175 100.39) (xy 53.85 100.386928) (xy 53.725518 100.399188)
(xy 53.60582 100.435498) (xy 53.495506 100.494463) (xy 53.398815 100.573815) (xy 53.319463 100.670506) (xy 53.273943 100.755666)
(xy 53.263244 100.746885) (xy 53.2145 100.720831) (xy 53.2145 100.589867) (xy 53.296996 100.555696) (xy 53.399689 100.487079)
(xy 53.487023 100.399745) (xy 53.55564 100.297052) (xy 53.602905 100.182945) (xy 53.627 100.06181) (xy 53.627 99.971309)
(xy 53.678799 99.928799) (xy 53.753115 99.838244) (xy 53.765806 99.8145) (xy 53.984194 99.8145) (xy 53.996885 99.838244)
(xy 54.071201 99.928799) (xy 54.161756 100.003115) (xy 54.265068 100.058336) (xy 54.377169 100.092342) (xy 54.49375 100.103824)
(xy 55.00625 100.103824) (xy 55.122831 100.092342) (xy 55.234932 100.058336) (xy 55.338244 100.003115) (xy 55.428799 99.928799)
(xy 55.503115 99.838244) (xy 55.558336 99.734932) (xy 55.592342 99.622831) (xy 55.603824 99.50625) (xy 55.603824 99.06875)
(xy 55.592342 98.952169) (xy 55.558336 98.840068) (xy 55.503115 98.736756) (xy 55.494334 98.726057) (xy 55.579494 98.680537)
(xy 55.676185 98.601185) (xy 55.755537 98.504494) (xy 55.814502 98.39418) (xy 55.850812 98.274482) (xy 55.863072 98.15)
(xy 55.86 97.99825) (xy 55.70125 97.8395) (xy 54.877 97.8395) (xy 54.877 97.8595) (xy 54.623 97.8595)
(xy 54.623 97.8395) (xy 54.603 97.8395) (xy 54.603 97.5855) (xy 54.623 97.5855) (xy 54.623 97.5655)
(xy 54.877 97.5655) (xy 54.877 97.5855) (xy 55.70125 97.5855) (xy 55.86 97.42675) (xy 55.863072 97.275)
(xy 55.850812 97.150518) (xy 55.814502 97.03082) (xy 55.755537 96.920506) (xy 55.676185 96.823815) (xy 55.579494 96.744463)
(xy 55.46918 96.685498) (xy 55.349482 96.649188) (xy 55.225 96.636928) (xy 55.03575 96.64) (xy 54.877002 96.798748)
(xy 54.877002 96.64) (xy 54.817422 96.64) (xy 55.110422 96.347) (xy 59.049578 96.347) (xy 59.324802 96.622223)
(xy 59.402059 96.685628) (xy 59.51967 96.748491) (xy 59.647285 96.787203) (xy 59.779999 96.800274) (xy 59.912714 96.787203)
(xy 60.040329 96.748491) (xy 60.15794 96.685628) (xy 60.261026 96.601026) (xy 60.345628 96.49794) (xy 60.408491 96.380329)
(xy 60.447203 96.252714) (xy 60.460274 96.119999) (xy 60.447203 95.987285) (xy 60.408491 95.85967) (xy 60.345628 95.742059)
(xy 60.282223 95.664802) (xy 60.055668 95.438246) (xy 61.123 95.438246) (xy 61.123 95.561754) (xy 61.147095 95.682889)
(xy 61.19436 95.796996) (xy 61.262977 95.899689) (xy 61.350311 95.987023) (xy 61.453004 96.05564) (xy 61.567111 96.102905)
(xy 61.617673 96.112962) (xy 63.973001 98.468291) (xy 63.973 107.974119) (xy 63.970451 108) (xy 63.973 108.02588)
(xy 63.980626 108.103309) (xy 64.010761 108.202649) (xy 64.059696 108.294202) (xy 64.125552 108.374448) (xy 64.145666 108.390955)
(xy 65.359049 109.604339) (xy 65.375552 109.624448) (xy 65.455798 109.690304) (xy 65.54735 109.739239) (xy 65.64669 109.769374)
(xy 65.75 109.779549) (xy 65.775881 109.777) (xy 83.474119 109.777) (xy 83.5 109.779549) (xy 83.525881 109.777)
(xy 83.60331 109.769374) (xy 83.70265 109.739239) (xy 83.794202 109.690304) (xy 83.874448 109.624448) (xy 83.890955 109.604334)
(xy 85.066839 108.428451) (xy 85.086948 108.411948) (xy 85.152804 108.331702) (xy 85.201739 108.24015) (xy 85.231874 108.14081)
(xy 85.2395 108.063381) (xy 85.242049 108.0375) (xy 85.2395 108.011619) (xy 85.2395 98.765806) (xy 85.263244 98.753115)
(xy 85.353799 98.678799) (xy 85.428115 98.588244) (xy 85.483336 98.484932) (xy 85.5 98.429999) (xy 85.516664 98.484932)
(xy 85.571885 98.588244) (xy 85.646201 98.678799) (xy 85.736756 98.753115) (xy 85.840068 98.808336) (xy 85.952169 98.842342)
(xy 86.06875 98.853824) (xy 86.50625 98.853824) (xy 86.622831 98.842342) (xy 86.734932 98.808336) (xy 86.838244 98.753115)
(xy 86.928799 98.678799) (xy 87.003115 98.588244) (xy 87.058336 98.484932) (xy 87.092342 98.372831) (xy 87.103824 98.25625)
(xy 87.103824 97.74375) (xy 87.092342 97.627169) (xy 87.058336 97.515068) (xy 87.003115 97.411756) (xy 86.928799 97.321201)
(xy 86.838244 97.246885) (xy 86.8145 97.234194) (xy 86.8145 96.765806) (xy 86.838244 96.753115) (xy 86.928799 96.678799)
(xy 87.003115 96.588244) (xy 87.058336 96.484932) (xy 87.092342 96.372831) (xy 87.103824 96.25625) (xy 87.103824 95.74375)
(xy 87.092342 95.627169) (xy 87.058336 95.515068) (xy 87.003115 95.411756) (xy 86.928799 95.321201) (xy 86.838244 95.246885)
(xy 86.734932 95.191664) (xy 86.622831 95.157658) (xy 86.527 95.14822) (xy 86.527 94.720606) (xy 86.59497 94.699988)
(xy 86.660463 94.664981) (xy 86.717869 94.617869) (xy 86.764981 94.560463) (xy 86.799988 94.49497) (xy 86.821545 94.423905)
(xy 86.828824 94.35) (xy 86.828824 93.55) (xy 86.821545 93.476095) (xy 86.799988 93.40503) (xy 86.764981 93.339537)
(xy 86.717869 93.282131) (xy 86.660463 93.235019) (xy 86.59497 93.200012) (xy 86.523905 93.178455) (xy 86.45 93.171176)
(xy 85.55 93.171176) (xy 85.476095 93.178455) (xy 85.40503 93.200012) (xy 85.339537 93.235019) (xy 85.282131 93.282131)
(xy 85.235019 93.339537) (xy 85.200012 93.40503) (xy 85.178455 93.476095) (xy 85.171176 93.55) (xy 85.171176 94.35)
(xy 85.178455 94.423905) (xy 85.200012 94.49497) (xy 85.235019 94.560463) (xy 85.282131 94.617869) (xy 85.339537 94.664981)
(xy 85.40503 94.699988) (xy 85.473 94.720606) (xy 85.473001 95.495732) (xy 85.428115 95.411756) (xy 85.353799 95.321201)
(xy 85.263244 95.246885) (xy 85.159932 95.191664) (xy 85.047831 95.157658) (xy 84.93125 95.146176) (xy 84.49375 95.146176)
(xy 84.377169 95.157658) (xy 84.265068 95.191664) (xy 84.161756 95.246885) (xy 84.071201 95.321201) (xy 83.996885 95.411756)
(xy 83.941664 95.515068) (xy 83.907658 95.627169) (xy 83.896176 95.74375) (xy 83.896176 96.25625) (xy 83.907658 96.372831)
(xy 83.941664 96.484932) (xy 83.996885 96.588244) (xy 84.071201 96.678799) (xy 84.161756 96.753115) (xy 84.185501 96.765807)
(xy 84.1855 97.234193) (xy 84.161756 97.246885) (xy 84.071201 97.321201) (xy 83.996885 97.411756) (xy 83.941664 97.515068)
(xy 83.907658 97.627169) (xy 83.896176 97.74375) (xy 83.896176 98.25625) (xy 83.907658 98.372831) (xy 83.941664 98.484932)
(xy 83.996885 98.588244) (xy 84.071201 98.678799) (xy 84.161756 98.753115) (xy 84.1855 98.765806) (xy 84.185501 107.819209)
(xy 83.281711 108.723) (xy 65.96829 108.723) (xy 65.027 107.781711) (xy 65.027 98.275877) (xy 65.029549 98.249999)
(xy 65.027 98.224119) (xy 65.019374 98.14669) (xy 64.989239 98.04735) (xy 64.940304 97.955798) (xy 64.874448 97.875552)
(xy 64.854339 97.859049) (xy 63.433536 96.438246) (xy 66.373 96.438246) (xy 66.373 96.561754) (xy 66.397095 96.682889)
(xy 66.44436 96.796996) (xy 66.512977 96.899689) (xy 66.600311 96.987023) (xy 66.703004 97.05564) (xy 66.817111 97.102905)
(xy 66.938246 97.127) (xy 67.061754 97.127) (xy 67.182889 97.102905) (xy 67.296996 97.05564) (xy 67.339859 97.027)
(xy 72.974119 97.027) (xy 73 97.029549) (xy 73.025881 97.027) (xy 73.10331 97.019374) (xy 73.20265 96.989239)
(xy 73.294202 96.940304) (xy 73.374448 96.874448) (xy 73.390955 96.854334) (xy 74.076741 96.168548) (xy 74.67299 96.168548)
(xy 74.67299 96.331452) (xy 74.704772 96.491227) (xy 74.767113 96.641731) (xy 74.857618 96.777181) (xy 74.972809 96.892372)
(xy 75.108259 96.982877) (xy 75.258763 97.045218) (xy 75.418538 97.077) (xy 75.422877 97.077) (xy 75.407658 97.127169)
(xy 75.396176 97.24375) (xy 75.396176 97.75625) (xy 75.407658 97.872831) (xy 75.441664 97.984932) (xy 75.496885 98.088244)
(xy 75.571201 98.178799) (xy 75.648001 98.241826) (xy 75.648 98.508174) (xy 75.571201 98.571201) (xy 75.496885 98.661756)
(xy 75.441664 98.765068) (xy 75.407658 98.877169) (xy 75.396176 98.99375) (xy 75.396176 99.50625) (xy 75.407658 99.622831)
(xy 75.441664 99.734932) (xy 75.496885 99.838244) (xy 75.571201 99.928799) (xy 75.661756 100.003115) (xy 75.765068 100.058336)
(xy 75.877169 100.092342) (xy 75.99375 100.103824) (xy 76.43125 100.103824) (xy 76.547831 100.092342) (xy 76.659932 100.058336)
(xy 76.763244 100.003115) (xy 76.773943 99.994334) (xy 76.819463 100.079494) (xy 76.898815 100.176185) (xy 76.995506 100.255537)
(xy 77.10582 100.314502) (xy 77.225518 100.350812) (xy 77.35 100.363072) (xy 77.50175 100.36) (xy 77.6605 100.20125)
(xy 77.6605 99.377) (xy 77.9145 99.377) (xy 77.9145 100.20125) (xy 78.07325 100.36) (xy 78.225 100.363072)
(xy 78.349482 100.350812) (xy 78.46918 100.314502) (xy 78.579494 100.255537) (xy 78.676185 100.176185) (xy 78.755537 100.079494)
(xy 78.814502 99.96918) (xy 78.850812 99.849482) (xy 78.863072 99.725) (xy 78.86 99.53575) (xy 78.70125 99.377)
(xy 77.9145 99.377) (xy 77.6605 99.377) (xy 77.6405 99.377) (xy 77.6405 99.123) (xy 77.6605 99.123)
(xy 77.6605 97.627) (xy 77.9145 97.627) (xy 77.9145 99.123) (xy 78.70125 99.123) (xy 78.86 98.96425)
(xy 78.863072 98.775) (xy 78.850812 98.650518) (xy 78.814502 98.53082) (xy 78.755537 98.420506) (xy 78.718191 98.375)
(xy 78.755537 98.329494) (xy 78.814502 98.21918) (xy 78.850812 98.099482) (xy 78.863072 97.975) (xy 78.86 97.78575)
(xy 78.70125 97.627) (xy 77.9145 97.627) (xy 77.6605 97.627) (xy 77.6405 97.627) (xy 77.6405 97.373)
(xy 77.6605 97.373) (xy 77.6605 96.54875) (xy 77.9145 96.54875) (xy 77.9145 97.373) (xy 78.70125 97.373)
(xy 78.86 97.21425) (xy 78.863072 97.025) (xy 78.850812 96.900518) (xy 78.814502 96.78082) (xy 78.755537 96.670506)
(xy 78.676185 96.573815) (xy 78.579494 96.494463) (xy 78.46918 96.435498) (xy 78.349482 96.399188) (xy 78.225 96.386928)
(xy 78.07325 96.39) (xy 77.9145 96.54875) (xy 77.6605 96.54875) (xy 77.50175 96.39) (xy 77.35 96.386928)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 77.225518 96.399188) (xy 77.141251 96.42475) (xy 81.116001 92.45) (xy 84.911928 92.45) (xy 84.924188 92.574482)
(xy 84.960498 92.69418) (xy 85.019463 92.804494) (xy 85.098815 92.901185) (xy 85.195506 92.980537) (xy 85.30582 93.039502)
(xy 85.425518 93.075812) (xy 85.55 93.088072) (xy 85.71425 93.085) (xy 85.873 92.92625) (xy 85.873 92.177)
(xy 86.127 92.177) (xy 86.127 92.92625) (xy 86.28575 93.085) (xy 86.45 93.088072) (xy 86.574482 93.075812)
(xy 86.69418 93.039502) (xy 86.804494 92.980537) (xy 86.901185 92.901185) (xy 86.980537 92.804494) (xy 87.039502 92.69418)
(xy 87.075812 92.574482) (xy 87.088072 92.45) (xy 87.085 92.33575) (xy 86.92625 92.177) (xy 86.127 92.177)
(xy 85.873 92.177) (xy 85.07375 92.177) (xy 84.915 92.33575) (xy 84.911928 92.45) (xy 81.116001 92.45)
(xy 81.387967 92.178035) (xy 81.409974 92.159974) (xy 81.433315 92.131534) (xy 81.451763 92.109055) (xy 81.482079 92.072115)
(xy 81.535657 91.971876) (xy 81.557707 91.899188) (xy 81.568651 91.863112) (xy 81.575989 91.788599) (xy 81.577 91.778336)
(xy 81.577 91.778332) (xy 81.57979 91.750001) (xy 81.577 91.72167) (xy 81.577 91.65) (xy 84.911928 91.65)
(xy 84.915 91.76425) (xy 85.07375 91.923) (xy 85.873 91.923) (xy 85.873 91.17375) (xy 86.127 91.17375)
(xy 86.127 91.923) (xy 86.92625 91.923) (xy 87.085 91.76425) (xy 87.088072 91.65) (xy 87.075812 91.525518)
(xy 87.039502 91.40582) (xy 86.980537 91.295506) (xy 86.901185 91.198815) (xy 86.804494 91.119463) (xy 86.69418 91.060498)
(xy 86.574482 91.024188) (xy 86.45 91.011928) (xy 86.28575 91.015) (xy 86.127 91.17375) (xy 85.873 91.17375)
(xy 85.71425 91.015) (xy 85.55 91.011928) (xy 85.425518 91.024188) (xy 85.30582 91.060498) (xy 85.195506 91.119463)
(xy 85.098815 91.198815) (xy 85.019463 91.295506) (xy 84.960498 91.40582) (xy 84.924188 91.525518) (xy 84.911928 91.65)
(xy 81.577 91.65) (xy 81.577 81.028328) (xy 81.57979 80.999999) (xy 81.577 80.97167) (xy 81.577 80.971664)
(xy 81.56865 80.886888) (xy 81.535657 80.778124) (xy 81.482079 80.677885) (xy 81.409974 80.590026) (xy 81.387963 80.571962)
(xy 79.077 78.260999) (xy 79.077 78.168548) (xy 79.045218 78.008773) (xy 78.982877 77.858269) (xy 78.892372 77.722819)
(xy 78.777181 77.607628) (xy 78.641731 77.517123) (xy 78.491227 77.454782) (xy 78.331452 77.423) (xy 78.168548 77.423)
(xy 78.008773 77.454782) (xy 77.858269 77.517123) (xy 77.722819 77.607628) (xy 77.607628 77.722819) (xy 77.517123 77.858269)
(xy 77.454782 78.008773) (xy 77.423 78.168548) (xy 77.423 78.331452) (xy 77.454782 78.491227) (xy 77.517123 78.641731)
(xy 77.607628 78.777181) (xy 77.722819 78.892372) (xy 77.858269 78.982877) (xy 78.008773 79.045218) (xy 78.168548 79.077)
(xy 78.260999 79.077) (xy 80.423 81.239001) (xy 80.423001 91.510997) (xy 76.260999 95.673) (xy 76.092543 95.673)
(xy 76.027171 95.607628) (xy 75.891721 95.517123) (xy 75.741217 95.454782) (xy 75.581442 95.423) (xy 75.418538 95.423)
(xy 75.258763 95.454782) (xy 75.108259 95.517123) (xy 74.972809 95.607628) (xy 74.857618 95.722819) (xy 74.767113 95.858269)
(xy 74.704772 96.008773) (xy 74.67299 96.168548) (xy 74.076741 96.168548) (xy 77.194999 93.050291) (xy 77.203004 93.05564)
(xy 77.317111 93.102905) (xy 77.438246 93.127) (xy 77.561754 93.127) (xy 77.682889 93.102905) (xy 77.796996 93.05564)
(xy 77.899689 92.987023) (xy 77.987023 92.899689) (xy 78.05564 92.796996) (xy 78.102905 92.682889) (xy 78.127 92.561754)
(xy 78.127 92.438246) (xy 78.102905 92.317111) (xy 78.05564 92.203004) (xy 77.987023 92.100311) (xy 77.899689 92.012977)
(xy 77.796996 91.94436) (xy 77.682889 91.897095) (xy 77.561754 91.873) (xy 77.438246 91.873) (xy 77.317111 91.897095)
(xy 77.203004 91.94436) (xy 77.160141 91.973) (xy 77.025877 91.973) (xy 76.999999 91.970451) (xy 76.974121 91.973)
(xy 76.974119 91.973) (xy 76.89669 91.980626) (xy 76.79735 92.010761) (xy 76.705798 92.059696) (xy 76.625552 92.125552)
(xy 76.609049 92.145661) (xy 72.781711 95.973) (xy 67.339859 95.973) (xy 67.296996 95.94436) (xy 67.182889 95.897095)
(xy 67.061754 95.873) (xy 66.938246 95.873) (xy 66.817111 95.897095) (xy 66.703004 95.94436) (xy 66.600311 96.012977)
(xy 66.512977 96.100311) (xy 66.44436 96.203004) (xy 66.397095 96.317111) (xy 66.373 96.438246) (xy 63.433536 96.438246)
(xy 62.362962 95.367673) (xy 62.352905 95.317111) (xy 62.30564 95.203004) (xy 62.237023 95.100311) (xy 62.149689 95.012977)
(xy 62.046996 94.94436) (xy 61.932889 94.897095) (xy 61.811754 94.873) (xy 61.688246 94.873) (xy 61.567111 94.897095)
(xy 61.453004 94.94436) (xy 61.350311 95.012977) (xy 61.262977 95.100311) (xy 61.19436 95.203004) (xy 61.147095 95.317111)
(xy 61.123 95.438246) (xy 60.055668 95.438246) (xy 59.832227 95.214805) (xy 59.811027 95.188973) (xy 59.707941 95.104372)
(xy 59.59033 95.041508) (xy 59.462715 95.002796) (xy 59.363252 94.993) (xy 59.363245 94.993) (xy 59.33 94.989726)
(xy 59.296755 94.993) (xy 54.863241 94.993) (xy 54.829999 94.989726) (xy 54.796757 94.993) (xy 54.796748 94.993)
(xy 54.697285 95.002796) (xy 54.56967 95.041508) (xy 54.452059 95.104372) (xy 54.348973 95.188973) (xy 54.327774 95.214804)
(xy 53.527 96.015578) (xy 53.527 95.661287) (xy 53.542905 95.622889) (xy 53.567 95.501754) (xy 53.567 95.378246)
(xy 53.542905 95.257111) (xy 53.49564 95.143004) (xy 53.427023 95.040311) (xy 53.339689 94.952977) (xy 53.236996 94.88436)
(xy 53.122889 94.837095) (xy 53.001754 94.813) (xy 52.878246 94.813) (xy 52.757111 94.837095) (xy 52.643004 94.88436)
(xy 52.540311 94.952977) (xy 52.452977 95.040311) (xy 52.38436 95.143004) (xy 52.337095 95.257111) (xy 52.313 95.378246)
(xy 52.313 95.501754) (xy 52.337095 95.622889) (xy 52.38436 95.736996) (xy 52.452977 95.839689) (xy 52.473001 95.859713)
(xy 52.473 96.964149) (xy 52.411756 96.996885) (xy 52.321201 97.071201) (xy 52.246885 97.161756) (xy 52.191664 97.265068)
(xy 52.157658 97.377169) (xy 52.146176 97.49375) (xy 52.146176 97.93125) (xy 52.157658 98.047831) (xy 52.191664 98.159932)
(xy 52.246885 98.263244) (xy 52.321201 98.353799) (xy 52.411756 98.428115) (xy 52.515068 98.483336) (xy 52.570001 98.5)
(xy 52.515068 98.516664) (xy 52.411756 98.571885) (xy 52.321201 98.646201) (xy 52.246885 98.736756) (xy 52.191664 98.840068)
(xy 52.157658 98.952169) (xy 52.146176 99.06875) (xy 52.146176 99.50625) (xy 52.157658 99.622831) (xy 52.191664 99.734932)
(xy 52.246885 99.838244) (xy 52.321201 99.928799) (xy 52.342902 99.946609) (xy 52.340104 99.950018) (xy 52.340101 99.950021)
(xy 52.293084 100.007311) (xy 52.24647 100.09452) (xy 52.217765 100.189147) (xy 52.208073 100.287556) (xy 52.210501 100.312209)
(xy 52.210501 100.720831) (xy 52.161756 100.746885) (xy 52.071201 100.821201) (xy 51.996885 100.911756) (xy 51.941664 101.015068)
(xy 51.907658 101.127169) (xy 51.896176 101.24375) (xy 51.896176 101.688387) (xy 51.603824 101.396035) (xy 51.603824 101.06875)
(xy 51.592342 100.952169) (xy 51.558336 100.840068) (xy 51.503115 100.736756) (xy 51.494334 100.726057) (xy 51.579494 100.680537)
(xy 51.676185 100.601185) (xy 51.755537 100.504494) (xy 51.814502 100.39418) (xy 51.850812 100.274482) (xy 51.863072 100.15)
(xy 51.86 99.99825) (xy 51.70125 99.8395) (xy 50.877 99.8395) (xy 50.877 99.8595) (xy 50.623 99.8595)
(xy 50.623 99.8395) (xy 49.79875 99.8395) (xy 49.64 99.99825) (xy 49.636928 100.15) (xy 49.306712 100.15)
(xy 49.307023 100.149689) (xy 49.37564 100.046996) (xy 49.422905 99.932889) (xy 49.447 99.811754) (xy 49.447 99.688246)
(xy 49.422905 99.567111) (xy 49.37564 99.453004) (xy 49.347 99.410141) (xy 49.347 99.275) (xy 49.636928 99.275)
(xy 49.64 99.42675) (xy 49.79875 99.5855) (xy 50.623 99.5855) (xy 50.623 98.79875) (xy 50.877 98.79875)
(xy 50.877 99.5855) (xy 51.70125 99.5855) (xy 51.86 99.42675) (xy 51.863072 99.275) (xy 51.850812 99.150518)
(xy 51.814502 99.03082) (xy 51.755537 98.920506) (xy 51.676185 98.823815) (xy 51.579494 98.744463) (xy 51.46918 98.685498)
(xy 51.349482 98.649188) (xy 51.225 98.636928) (xy 51.03575 98.64) (xy 50.877 98.79875) (xy 50.623 98.79875)
(xy 50.46425 98.64) (xy 50.275 98.636928) (xy 50.150518 98.649188) (xy 50.03082 98.685498) (xy 49.920506 98.744463)
(xy 49.823815 98.823815) (xy 49.744463 98.920506) (xy 49.685498 99.03082) (xy 49.649188 99.150518) (xy 49.636928 99.275)
(xy 49.347 99.275) (xy 49.347 98.845877) (xy 49.349549 98.819999) (xy 49.345565 98.779549) (xy 49.339374 98.71669)
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(xy 49.309239 98.61735) (xy 49.260304 98.525798) (xy 49.194448 98.445552) (xy 49.174339 98.429049) (xy 47.862962 97.117673)
(xy 47.852905 97.067111) (xy 47.80564 96.953004) (xy 47.737023 96.850311) (xy 47.649689 96.762977) (xy 47.546996 96.69436)
(xy 47.432889 96.647095) (xy 47.311754 96.623) (xy 47.188246 96.623) (xy 47.067111 96.647095) (xy 46.953004 96.69436)
(xy 46.850311 96.762977) (xy 46.762977 96.850311) (xy 46.69436 96.953004) (xy 46.647095 97.067111) (xy 46.623 97.188246)
(xy 46.527 97.188246) (xy 46.527 97.043558) (xy 46.558336 96.984932) (xy 46.592342 96.872831) (xy 46.603824 96.75625)
(xy 46.603824 96.24375) (xy 46.592342 96.127169) (xy 46.558336 96.015068) (xy 46.503115 95.911756) (xy 46.428799 95.821201)
(xy 46.338244 95.746885) (xy 46.234932 95.691664) (xy 46.122831 95.657658) (xy 46.00625 95.646176) (xy 45.56875 95.646176)
(xy 45.452169 95.657658) (xy 45.340068 95.691664) (xy 45.236756 95.746885) (xy 45.226057 95.755666) (xy 45.180537 95.670506)
(xy 45.101185 95.573815) (xy 45.004494 95.494463) (xy 44.89418 95.435498) (xy 44.774482 95.399188) (xy 44.65 95.386928)
(xy 44.49825 95.39) (xy 44.3395 95.54875) (xy 44.0855 95.54875) (xy 43.92675 95.39) (xy 43.775 95.386928)
(xy 43.650518 95.399188) (xy 43.53082 95.435498) (xy 43.420506 95.494463) (xy 43.323815 95.573815) (xy 43.244463 95.670506)
(xy 43.185498 95.78082) (xy 43.149188 95.900518) (xy 43.136928 96.025) (xy 33.85029 96.025) (xy 33.657395 95.832106)
(xy 33.679847 95.777903) (xy 33.727 95.540849) (xy 33.727 95.299151) (xy 33.679847 95.062097) (xy 33.587353 94.838798)
(xy 33.453073 94.637833) (xy 33.282167 94.466927) (xy 33.081202 94.332647) (xy 32.857903 94.240153) (xy 32.620849 94.193)
(xy 32.379151 94.193) (xy 32.142097 94.240153) (xy 31.918798 94.332647) (xy 31.717833 94.466927) (xy 31.546927 94.637833)
(xy 31.425961 94.818872) (xy 31.338244 94.746885) (xy 31.3145 94.734194) (xy 31.3145 94.265806) (xy 31.338244 94.253115)
(xy 31.428799 94.178799) (xy 31.503115 94.088244) (xy 31.558336 93.984932) (xy 31.592342 93.872831) (xy 31.603824 93.75625)
(xy 31.603824 93.719064) (xy 31.717833 93.833073) (xy 31.918798 93.967353) (xy 32.142097 94.059847) (xy 32.379151 94.107)
(xy 32.620849 94.107) (xy 32.857903 94.059847) (xy 33.081202 93.967353) (xy 33.282167 93.833073) (xy 33.453073 93.662167)
(xy 33.543388 93.527) (xy 33.96415 93.527) (xy 33.996885 93.588244) (xy 34.071201 93.678799) (xy 34.161756 93.753115)
(xy 34.265068 93.808336) (xy 34.377169 93.842342) (xy 34.49375 93.853824) (xy 34.93125 93.853824) (xy 35.047831 93.842342)
(xy 35.159932 93.808336) (xy 35.263244 93.753115) (xy 35.273943 93.744334) (xy 35.319463 93.829494) (xy 35.398815 93.926185)
(xy 35.495506 94.005537) (xy 35.60582 94.064502) (xy 35.725518 94.100812) (xy 35.85 94.113072) (xy 36.00175 94.11)
(xy 36.1605 93.95125) (xy 36.1605 93.127) (xy 36.4145 93.127) (xy 36.4145 93.95125) (xy 36.57325 94.11)
(xy 36.725 94.113072) (xy 36.849482 94.100812) (xy 36.96918 94.064502) (xy 37.079494 94.005537) (xy 37.176185 93.926185)
(xy 37.255537 93.829494) (xy 37.314502 93.71918) (xy 37.350812 93.599482) (xy 37.363072 93.475) (xy 37.36 93.28575)
(xy 37.20125 93.127) (xy 36.4145 93.127) (xy 36.1605 93.127) (xy 36.1405 93.127) (xy 36.1405 92.873)
(xy 36.1605 92.873) (xy 36.1605 92.04875) (xy 36.4145 92.04875) (xy 36.4145 92.873) (xy 37.20125 92.873)
(xy 37.36 92.71425) (xy 37.363072 92.525) (xy 37.350812 92.400518) (xy 37.314502 92.28082) (xy 37.255537 92.170506)
(xy 37.176185 92.073815) (xy 37.079494 91.994463) (xy 36.96918 91.935498) (xy 36.849482 91.899188) (xy 36.725 91.886928)
(xy 36.57325 91.89) (xy 36.4145 92.04875) (xy 36.1605 92.04875) (xy 36.00175 91.89) (xy 35.85 91.886928)
(xy 35.725518 91.899188) (xy 35.60582 91.935498) (xy 35.495506 91.994463) (xy 35.398815 92.073815) (xy 35.319463 92.170506)
(xy 35.273943 92.255666) (xy 35.263244 92.246885) (xy 35.159932 92.191664) (xy 35.047831 92.157658) (xy 34.93125 92.146176)
(xy 34.49375 92.146176) (xy 34.377169 92.157658) (xy 34.265068 92.191664) (xy 34.161756 92.246885) (xy 34.071201 92.321201)
(xy 33.996885 92.411756) (xy 33.96415 92.473) (xy 33.65951 92.473) (xy 33.587353 92.298798) (xy 33.453073 92.097833)
(xy 33.282167 91.926927) (xy 33.132447 91.826888) (xy 33.35 91.828072) (xy 33.474482 91.815812) (xy 33.59418 91.779502)
(xy 33.704494 91.720537) (xy 33.801185 91.641185) (xy 33.880537 91.544494) (xy 33.939502 91.43418) (xy 33.975812 91.314482)
(xy 33.988072 91.19) (xy 33.985 90.62575) (xy 33.82625 90.467) (xy 32.627 90.467) (xy 32.627 90.487)
(xy 32.373 90.487) (xy 32.373 90.467) (xy 31.17375 90.467) (xy 31.015 90.62575) (xy 31.011928 91.19)
(xy 31.024188 91.314482) (xy 31.060498 91.43418) (xy 31.119463 91.544494) (xy 31.198815 91.641185) (xy 31.295506 91.720537)
(xy 31.40582 91.779502) (xy 31.525518 91.815812) (xy 31.65 91.828072) (xy 31.867553 91.826888) (xy 31.717833 91.926927)
(xy 31.546927 92.097833) (xy 31.412647 92.298798) (xy 31.320153 92.522097) (xy 31.281475 92.716542) (xy 31.234932 92.691664)
(xy 31.122831 92.657658) (xy 31.00625 92.646176) (xy 30.56875 92.646176) (xy 30.452169 92.657658) (xy 30.340068 92.691664)
(xy 30.236756 92.746885) (xy 30.146201 92.821201) (xy 30.071885 92.911756) (xy 30.016664 93.015068) (xy 30 93.070001)
(xy 29.983336 93.015068) (xy 29.928115 92.911756) (xy 29.853799 92.821201) (xy 29.763244 92.746885) (xy 29.757 92.743548)
(xy 29.757 92.505877) (xy 29.759549 92.479999) (xy 29.755579 92.439696) (xy 29.749374 92.37669) (xy 29.719239 92.27735)
(xy 29.670304 92.185798) (xy 29.604448 92.105552) (xy 29.591099 92.094597) (xy 29.57826 92.079465) (xy 29.544736 92.05286)
(xy 28.577506 91.229278) (xy 28.574448 91.225552) (xy 28.538016 91.195653) (xy 28.521951 91.181974) (xy 28.518021 91.179244)
(xy 28.494202 91.159696) (xy 28.475478 91.149688) (xy 28.458054 91.137583) (xy 28.429822 91.125284) (xy 28.40265 91.110761)
(xy 28.382337 91.104599) (xy 28.362882 91.096124) (xy 28.332792 91.089569) (xy 28.30331 91.080626) (xy 28.282184 91.078545)
(xy 28.261451 91.074029) (xy 28.23066 91.073471) (xy 28.225881 91.073) (xy 28.204702 91.073) (xy 28.157659 91.072147)
(xy 28.152924 91.073) (xy 27.795666 91.073) (xy 27.903371 90.847117) (xy 27.975339 90.563589) (xy 27.990611 90.271469)
(xy 27.948599 89.981981) (xy 27.850919 89.706253) (xy 27.777472 89.568843) (xy 27.528397 89.491208) (xy 26.679605 90.34)
(xy 26.693748 90.354143) (xy 26.514143 90.533748) (xy 26.5 90.519605) (xy 26.485858 90.533748) (xy 26.306253 90.354143)
(xy 26.320395 90.34) (xy 25.471603 89.491208) (xy 25.222528 89.568843) (xy 25.096629 89.832883) (xy 25.089566 89.860709)
(xy 25.047353 89.758798) (xy 24.913073 89.557833) (xy 24.742167 89.386927) (xy 24.637 89.316657) (xy 24.637 88.847004)
(xy 24.70625 88.853824) (xy 25.14375 88.853824) (xy 25.260331 88.842342) (xy 25.372432 88.808336) (xy 25.475744 88.753115)
(xy 25.486443 88.744334) (xy 25.531963 88.829494) (xy 25.611315 88.926185) (xy 25.708006 89.005537) (xy 25.771735 89.039602)
(xy 25.728843 89.062528) (xy 25.651208 89.311603) (xy 26.5 90.160395) (xy 27.170395 89.49) (xy 31.011928 89.49)
(xy 31.015 90.05425) (xy 31.17375 90.213) (xy 32.373 90.213) (xy 32.373 89.01375) (xy 32.627 89.01375)
(xy 32.627 90.213) (xy 33.82625 90.213) (xy 33.985 90.05425) (xy 33.988072 89.49) (xy 33.975812 89.365518)
(xy 33.939502 89.24582) (xy 33.880537 89.135506) (xy 33.801185 89.038815) (xy 33.704494 88.959463) (xy 33.59418 88.900498)
(xy 33.474482 88.864188) (xy 33.35 88.851928) (xy 32.78575 88.855) (xy 32.627 89.01375) (xy 32.373 89.01375)
(xy 32.21425 88.855) (xy 31.65 88.851928) (xy 31.525518 88.864188) (xy 31.40582 88.900498) (xy 31.295506 88.959463)
(xy 31.198815 89.038815) (xy 31.119463 89.135506) (xy 31.060498 89.24582) (xy 31.024188 89.365518) (xy 31.011928 89.49)
(xy 27.170395 89.49) (xy 27.348792 89.311603) (xy 27.271157 89.062528) (xy 27.225818 89.040909) (xy 27.291994 89.005537)
(xy 27.388685 88.926185) (xy 27.468037 88.829494) (xy 27.527002 88.71918) (xy 27.563312 88.599482) (xy 27.575572 88.475)
(xy 27.5725 88.28575) (xy 27.41375 88.127) (xy 26.627 88.127) (xy 26.627 88.147) (xy 26.373 88.147)
(xy 26.373 88.127) (xy 26.353 88.127) (xy 26.353 87.873) (xy 26.373 87.873) (xy 26.373 87.04875)
(xy 26.627 87.04875) (xy 26.627 87.873) (xy 27.41375 87.873) (xy 27.5725 87.71425) (xy 27.575572 87.525)
(xy 27.563312 87.400518) (xy 27.527002 87.28082) (xy 27.468037 87.170506) (xy 27.388685 87.073815) (xy 27.291994 86.994463)
(xy 27.18168 86.935498) (xy 27.061982 86.899188) (xy 26.9375 86.886928) (xy 26.78575 86.89) (xy 26.627 87.04875)
(xy 26.373 87.04875) (xy 26.21425 86.89) (xy 26.0625 86.886928) (xy 25.938018 86.899188) (xy 25.81832 86.935498)
(xy 25.708006 86.994463) (xy 25.611315 87.073815) (xy 25.531963 87.170506) (xy 25.486443 87.255666) (xy 25.475744 87.246885)
(xy 25.372432 87.191664) (xy 25.260331 87.157658) (xy 25.14375 87.146176) (xy 24.70625 87.146176) (xy 24.637 87.152996)
(xy 24.637 85.562845) (xy 24.640274 85.5296) (xy 24.637 85.496355) (xy 24.637 85.496348) (xy 24.627204 85.396885)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 24.588492 85.26927) (xy 24.525628 85.151659) (xy 24.491809 85.110451) (xy 24.462224 85.074401) (xy 24.462222 85.074399)
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(xy 24.441027 85.048573) (xy 24.415201 85.027378) (xy 20.662 81.274178) (xy 20.662 80.407289) (xy 26.387038 86.132328)
(xy 26.397095 86.182889) (xy 26.44436 86.296996) (xy 26.512977 86.399689) (xy 26.600311 86.487023) (xy 26.703004 86.55564)
(xy 26.817111 86.602905) (xy 26.938246 86.627) (xy 27.061754 86.627) (xy 27.182889 86.602905) (xy 27.296996 86.55564)
(xy 27.399689 86.487023) (xy 27.487023 86.399689) (xy 27.55564 86.296996) (xy 27.602905 86.182889) (xy 27.627 86.061754)
(xy 27.627 85.938246) (xy 27.602905 85.817111) (xy 27.55564 85.703004) (xy 27.487023 85.600311) (xy 27.399689 85.512977)
(xy 27.296996 85.44436) (xy 27.182889 85.397095) (xy 27.132328 85.387038) (xy 21.527 79.781711) (xy 21.527 77.155488)
(xy 22.372325 77.155488) (xy 22.372949 77.200001) (xy 22.372325 77.244515) (xy 22.37838 77.277355) (xy 22.381766 77.307405)
(xy 22.383171 77.340784) (xy 22.393682 77.38403) (xy 22.402978 77.427564) (xy 22.416196 77.45825) (xy 22.426179 77.48678)
(xy 22.434978 77.519016) (xy 22.45486 77.558861) (xy 22.473602 77.599218) (xy 22.493315 77.62619) (xy 22.509395 77.651781)
(xy 22.525145 77.681248) (xy 22.553389 77.715663) (xy 22.580649 77.750847) (xy 22.60587 77.772757) (xy 22.627242 77.794129)
(xy 22.632343 77.800001) (xy 22.627242 77.805872) (xy 22.60587 77.827244) (xy 22.580649 77.849154) (xy 22.553389 77.884338)
(xy 22.525145 77.918753) (xy 22.509395 77.94822) (xy 22.493315 77.973811) (xy 22.473602 78.000783) (xy 22.45486 78.04114)
(xy 22.434978 78.080985) (xy 22.426179 78.113221) (xy 22.416194 78.141756) (xy 22.402978 78.172438) (xy 22.393684 78.215963)
(xy 22.383171 78.259217) (xy 22.381766 78.292598) (xy 22.378381 78.322644) (xy 22.372325 78.355488) (xy 22.372949 78.400002)
(xy 22.372325 78.444515) (xy 22.37838 78.477355) (xy 22.381766 78.507405) (xy 22.383171 78.540784) (xy 22.393682 78.58403)
(xy 22.402978 78.627564) (xy 22.416196 78.65825) (xy 22.426179 78.68678) (xy 22.434978 78.719016) (xy 22.45486 78.758861)
(xy 22.473602 78.799218) (xy 22.493315 78.82619) (xy 22.509395 78.851781) (xy 22.525145 78.881248) (xy 22.553389 78.915663)
(xy 22.580649 78.950847) (xy 22.60587 78.972757) (xy 22.627242 78.994129) (xy 22.632343 79) (xy 22.627242 79.005872)
(xy 22.60587 79.027244) (xy 22.580649 79.049154) (xy 22.553389 79.084338) (xy 22.525145 79.118753) (xy 22.509395 79.14822)
(xy 22.493315 79.173811) (xy 22.473602 79.200783) (xy 22.45486 79.24114) (xy 22.434978 79.280985) (xy 22.426179 79.313221)
(xy 22.416194 79.341756) (xy 22.402978 79.372438) (xy 22.393684 79.415963) (xy 22.383171 79.459217) (xy 22.381766 79.492598)
(xy 22.378381 79.522644) (xy 22.372325 79.555488) (xy 22.372949 79.600002) (xy 22.372325 79.644515) (xy 22.37838 79.677355)
(xy 22.381766 79.707405) (xy 22.383171 79.740784) (xy 22.393682 79.78403) (xy 22.402978 79.827564) (xy 22.416194 79.858246)
(xy 22.426179 79.88678) (xy 22.434978 79.919016) (xy 22.45486 79.958861) (xy 22.473602 79.999218) (xy 22.493315 80.02619)
(xy 22.509395 80.051781) (xy 22.525145 80.081248) (xy 22.553389 80.115663) (xy 22.580649 80.150847) (xy 22.60587 80.172757)
(xy 22.627242 80.194129) (xy 22.649152 80.21935) (xy 22.684345 80.246617) (xy 22.718751 80.274853) (xy 22.748211 80.2906)
(xy 22.773809 80.306684) (xy 22.800781 80.326397) (xy 22.841138 80.345139) (xy 22.880983 80.365021) (xy 22.913216 80.373819)
(xy 22.941745 80.383802) (xy 22.972428 80.397019) (xy 23.015956 80.406314) (xy 23.059215 80.416828) (xy 23.092592 80.418233)
(xy 23.093121 80.418293) (xy 23.096689 80.419375) (xy 23.14466 80.4241) (xy 23.166709 80.426584) (xy 23.170412 80.426636)
(xy 23.174118 80.427001) (xy 23.196417 80.427001) (xy 23.244505 80.427676) (xy 23.248166 80.427001) (xy 23.372999 80.427001)
(xy 23.372999 80.874118) (xy 23.37045 80.899999) (xy 23.37629 80.959293) (xy 23.380625 81.003308) (xy 23.41076 81.102648)
(xy 23.459695 81.194201) (xy 23.525551 81.274447) (xy 23.545665 81.290954) (xy 29.599049 87.344339) (xy 29.615552 87.364448)
(xy 29.677332 87.415149) (xy 29.695798 87.430304) (xy 29.78735 87.479239) (xy 29.88669 87.509374) (xy 29.989999 87.519549)
(xy 30.01588 87.517) (xy 30.483 87.517) (xy 30.483 87.641831) (xy 30.482326 87.645486) (xy 30.483 87.69359)
(xy 30.483 87.71588) (xy 30.483364 87.719577) (xy 30.483416 87.723281) (xy 30.485904 87.74536) (xy 30.490626 87.793309)
(xy 30.491707 87.796873) (xy 30.491767 87.797403) (xy 30.493172 87.830784) (xy 30.503685 87.874038) (xy 30.512979 87.917563)
(xy 30.526195 87.948245) (xy 30.53618 87.97678) (xy 30.544979 88.009016) (xy 30.564861 88.048861) (xy 30.583603 88.089218)
(xy 30.603316 88.11619) (xy 30.619396 88.141781) (xy 30.635146 88.171248) (xy 30.66339 88.205663) (xy 30.69065 88.240847)
(xy 30.715871 88.262757) (xy 30.737243 88.284129) (xy 30.759153 88.30935) (xy 30.794346 88.336617) (xy 30.828752 88.364853)
(xy 30.858212 88.3806) (xy 30.88381 88.396684) (xy 30.910782 88.416397) (xy 30.951139 88.435139) (xy 30.990984 88.455021)
(xy 31.023217 88.463819) (xy 31.051758 88.473807) (xy 31.082437 88.487021) (xy 31.125952 88.496313) (xy 31.169216 88.506828)
(xy 31.202595 88.508233) (xy 31.232644 88.511619) (xy 31.265487 88.517674) (xy 31.31 88.51705) (xy 31.354514 88.517674)
(xy 31.387354 88.511619) (xy 31.417404 88.508233) (xy 31.450783 88.506828) (xy 31.494029 88.496317) (xy 31.537563 88.487021)
(xy 31.568249 88.473803) (xy 31.596779 88.46382) (xy 31.629015 88.455021) (xy 31.66886 88.435139) (xy 31.709217 88.416397)
(xy 31.736189 88.396684) (xy 31.76178 88.380604) (xy 31.791247 88.364854) (xy 31.825662 88.33661) (xy 31.860846 88.30935)
(xy 31.882756 88.284129) (xy 31.904128 88.262757) (xy 31.929349 88.240847) (xy 31.956616 88.205654) (xy 31.984852 88.171248)
(xy 32.000599 88.141788) (xy 32.016683 88.11619) (xy 32.036396 88.089218) (xy 32.055138 88.048861) (xy 32.07502 88.009016)
(xy 32.083818 87.976783) (xy 32.093801 87.948254) (xy 32.107018 87.917571) (xy 32.116313 87.874043) (xy 32.126827 87.830784)
(xy 32.128232 87.797407) (xy 32.128292 87.796878) (xy 32.129374 87.79331) (xy 32.134099 87.745339) (xy 32.136583 87.72329)
(xy 32.136635 87.719587) (xy 32.137 87.715881) (xy 32.137 87.693582) (xy 32.137675 87.645494) (xy 32.137 87.641833)
(xy 32.137 87.428572) (xy 32.151139 87.435138) (xy 32.190984 87.45502) (xy 32.223217 87.463818) (xy 32.251746 87.473801)
(xy 32.282429 87.487018) (xy 32.325957 87.496313) (xy 32.369216 87.506827) (xy 32.402593 87.508232) (xy 32.403122 87.508292)
(xy 32.40669 87.509374) (xy 32.454661 87.514099) (xy 32.47671 87.516583) (xy 32.480413 87.516635) (xy 32.484119 87.517)
(xy 32.506418 87.517) (xy 32.554506 87.517675) (xy 32.558167 87.517) (xy 33.160141 87.517) (xy 33.203004 87.54564)
(xy 33.317111 87.592905) (xy 33.438246 87.617) (xy 33.561754 87.617) (xy 33.682889 87.592905) (xy 33.796996 87.54564)
(xy 33.899689 87.477023) (xy 33.987023 87.389689) (xy 34.05564 87.286996) (xy 34.102905 87.172889) (xy 34.127 87.051754)
(xy 34.127 86.928246) (xy 34.102905 86.807111) (xy 34.05564 86.693004) (xy 33.987023 86.590311) (xy 33.899689 86.502977)
(xy 33.796996 86.43436) (xy 33.682889 86.387095) (xy 33.561754 86.363) (xy 33.438246 86.363) (xy 33.317111 86.387095)
(xy 33.203004 86.43436) (xy 33.160141 86.463) (xy 32.737 86.463) (xy 32.737 86.338167) (xy 32.737675 86.334506)
(xy 32.737 86.286418) (xy 32.737 86.26412) (xy 32.736635 86.260414) (xy 32.736583 86.25671) (xy 32.734098 86.234654)
(xy 32.729374 86.186691) (xy 32.728292 86.183124) (xy 32.728232 86.182593) (xy 32.726827 86.149216) (xy 32.716313 86.105957)
(xy 32.707018 86.062429) (xy 32.693801 86.031746) (xy 32.683818 86.003217) (xy 32.67502 85.970984) (xy 32.655138 85.931139)
(xy 32.636396 85.890782) (xy 32.616683 85.86381) (xy 32.600599 85.838212) (xy 32.584852 85.808752) (xy 32.556616 85.774346)
(xy 32.529349 85.739153) (xy 32.504128 85.717243) (xy 32.482756 85.695871) (xy 32.460846 85.67065) (xy 32.425662 85.64339)
(xy 32.391247 85.615146) (xy 32.36178 85.599396) (xy 32.336189 85.583316) (xy 32.309217 85.563603) (xy 32.26886 85.544861)
(xy 32.229015 85.524979) (xy 32.196779 85.51618) (xy 32.168249 85.506197) (xy 32.137563 85.492979) (xy 32.094029 85.483683)
(xy 32.050783 85.473172) (xy 32.017404 85.471767) (xy 31.987354 85.468381) (xy 31.954514 85.462326) (xy 31.91 85.46295)
(xy 31.865487 85.462326) (xy 31.832644 85.468381) (xy 31.802595 85.471767) (xy 31.769216 85.473172) (xy 31.725952 85.483687)
(xy 31.682437 85.492979) (xy 31.651758 85.506193) (xy 31.623217 85.516181) (xy 31.590984 85.524979) (xy 31.551139 85.544861)
(xy 31.510782 85.563603) (xy 31.48381 85.583316) (xy 31.458212 85.5994) (xy 31.428752 85.615147) (xy 31.394346 85.643383)
(xy 31.359153 85.67065) (xy 31.337243 85.695871) (xy 31.315871 85.717243) (xy 31.29065 85.739153) (xy 31.26339 85.774337)
(xy 31.235146 85.808752) (xy 31.219396 85.838219) (xy 31.203316 85.86381) (xy 31.183603 85.890782) (xy 31.164861 85.931139)
(xy 31.144979 85.970984) (xy 31.13618 86.00322) (xy 31.126195 86.031755) (xy 31.112979 86.062437) (xy 31.103685 86.105962)
(xy 31.093172 86.149216) (xy 31.091767 86.182597) (xy 31.091707 86.183127) (xy 31.090626 86.186691) (xy 31.085904 86.23464)
(xy 31.083416 86.256719) (xy 31.083364 86.260423) (xy 31.083 86.26412) (xy 31.083 86.286408) (xy 31.082326 86.334514)
(xy 31.083 86.33817) (xy 31.083 86.551429) (xy 31.06886 86.544862) (xy 31.029015 86.52498) (xy 30.996779 86.516181)
(xy 30.968254 86.506199) (xy 30.93757 86.492982) (xy 30.894023 86.483683) (xy 30.850783 86.473173) (xy 30.817408 86.471768)
(xy 30.816878 86.471708) (xy 30.81331 86.470626) (xy 30.765339 86.465901) (xy 30.74329 86.463417) (xy 30.739587 86.463365)
(xy 30.735881 86.463) (xy 30.713583 86.463) (xy 30.665495 86.462325) (xy 30.661834 86.463) (xy 30.20829 86.463)
(xy 29.88229 86.137) (xy 29.951754 86.137) (xy 30.072889 86.112905) (xy 30.186996 86.06564) (xy 30.289689 85.997023)
(xy 30.377023 85.909689) (xy 30.44564 85.806996) (xy 30.468262 85.752381) (xy 30.533004 85.79564) (xy 30.647111 85.842905)
(xy 30.768246 85.867) (xy 30.891754 85.867) (xy 31.012889 85.842905) (xy 31.126996 85.79564) (xy 31.229689 85.727023)
(xy 31.317023 85.639689) (xy 31.38564 85.536996) (xy 31.432905 85.422889) (xy 31.457 85.301754) (xy 31.457 85.178246)
(xy 31.432905 85.057111) (xy 31.38564 84.943004) (xy 31.317023 84.840311) (xy 31.229689 84.752977) (xy 31.126996 84.68436)
(xy 31.027 84.64294) (xy 31.027 83.227) (xy 31.060244 83.227) (xy 31.063905 83.227675) (xy 31.111993 83.227)
(xy 31.134291 83.227) (xy 31.137997 83.226635) (xy 31.1417 83.226583) (xy 31.163749 83.224099) (xy 31.21172 83.219374)
(xy 31.215288 83.218292) (xy 31.215818 83.218232) (xy 31.249193 83.216827) (xy 31.292433 83.206317) (xy 31.33598 83.197018)
(xy 31.366664 83.183801) (xy 31.395189 83.173819) (xy 31.427425 83.16502) (xy 31.46727 83.145138) (xy 31.507627 83.126396)
(xy 31.534599 83.106683) (xy 31.56019 83.090603) (xy 31.589657 83.074853) (xy 31.624072 83.046609) (xy 31.659256 83.019349)
(xy 31.681166 82.994128) (xy 31.702538 82.972756) (xy 31.727759 82.950846) (xy 31.755026 82.915653) (xy 31.783262 82.881247)
(xy 31.799009 82.851787) (xy 31.815093 82.826189) (xy 31.834806 82.799217) (xy 31.853548 82.75886) (xy 31.87343 82.719015)
(xy 31.882228 82.686782) (xy 31.892213 82.658249) (xy 31.905428 82.62757) (xy 31.914724 82.584038) (xy 31.925237 82.540783)
(xy 31.926642 82.507409) (xy 31.930028 82.477358) (xy 31.936085 82.444506) (xy 31.93546 82.400001) (xy 31.936085 82.355495)
(xy 31.930027 82.322639) (xy 31.926642 82.292593) (xy 31.925237 82.259216) (xy 31.914723 82.215957) (xy 31.905428 82.172429)
(xy 31.892211 82.141746) (xy 31.882228 82.113217) (xy 31.87343 82.080984) (xy 31.853548 82.041139) (xy 31.834806 82.000782)
(xy 31.815093 81.97381) (xy 31.799009 81.948212) (xy 31.783262 81.918752) (xy 31.755026 81.884346) (xy 31.727759 81.849153)
(xy 31.702538 81.827243) (xy 31.681166 81.805871) (xy 31.676065 81.8) (xy 31.681166 81.794128) (xy 31.702538 81.772756)
(xy 31.727759 81.750846) (xy 31.755026 81.715653) (xy 31.783262 81.681247) (xy 31.799009 81.651787) (xy 31.815093 81.626189)
(xy 31.834806 81.599217) (xy 31.853548 81.55886) (xy 31.87343 81.519015) (xy 31.882228 81.486782) (xy 31.892213 81.458249)
(xy 31.905428 81.42757) (xy 31.914724 81.384038) (xy 31.925237 81.340783) (xy 31.926642 81.307409) (xy 31.930028 81.277358)
(xy 31.936085 81.244506) (xy 31.93546 81.2) (xy 31.936085 81.155495) (xy 31.930027 81.122639) (xy 31.926642 81.092593)
(xy 31.925237 81.059216) (xy 31.914723 81.015957) (xy 31.905428 80.972429) (xy 31.892211 80.941746) (xy 31.882228 80.913217)
(xy 31.87343 80.880984) (xy 31.853548 80.841139) (xy 31.834806 80.800782) (xy 31.815093 80.77381) (xy 31.799009 80.748212)
(xy 31.783262 80.718752) (xy 31.755026 80.684346) (xy 31.727759 80.649153) (xy 31.702538 80.627243) (xy 31.681166 80.605871)
(xy 31.676065 80.6) (xy 31.681166 80.594128) (xy 31.702538 80.572756) (xy 31.727759 80.550846) (xy 31.755026 80.515653)
(xy 31.783262 80.481247) (xy 31.799009 80.451787) (xy 31.815093 80.426189) (xy 31.834806 80.399217) (xy 31.853548 80.35886)
(xy 31.87343 80.319015) (xy 31.882228 80.286782) (xy 31.892213 80.258249) (xy 31.905428 80.22757) (xy 31.914724 80.184038)
(xy 31.925237 80.140783) (xy 31.926642 80.107409) (xy 31.930028 80.077358) (xy 31.936085 80.044506) (xy 31.93546 80)
(xy 31.936085 79.955495) (xy 31.930027 79.922639) (xy 31.926642 79.892593) (xy 31.925237 79.859216) (xy 31.914723 79.815957)
(xy 31.905428 79.772429) (xy 31.892211 79.741746) (xy 31.882228 79.713217) (xy 31.87343 79.680984) (xy 31.853548 79.641139)
(xy 31.834806 79.600782) (xy 31.815093 79.57381) (xy 31.799009 79.548212) (xy 31.783262 79.518752) (xy 31.755026 79.484346)
(xy 31.727759 79.449153) (xy 31.702538 79.427243) (xy 31.681166 79.405871) (xy 31.676065 79.4) (xy 31.681166 79.394128)
(xy 31.702538 79.372756) (xy 31.727759 79.350846) (xy 31.755026 79.315653) (xy 31.783262 79.281247) (xy 31.799009 79.251787)
(xy 31.815093 79.226189) (xy 31.834806 79.199217) (xy 31.853548 79.15886) (xy 31.87343 79.119015) (xy 31.882228 79.086782)
(xy 31.892213 79.058249) (xy 31.905428 79.02757) (xy 31.914724 78.984038) (xy 31.925237 78.940783) (xy 31.926642 78.907409)
(xy 31.930028 78.877358) (xy 31.936085 78.844506) (xy 31.93546 78.8) (xy 31.936085 78.755495) (xy 31.930027 78.722639)
(xy 31.926642 78.692593) (xy 31.925237 78.659216) (xy 31.914723 78.615957) (xy 31.905428 78.572429) (xy 31.892211 78.541746)
(xy 31.882228 78.513217) (xy 31.87343 78.480984) (xy 31.853548 78.441139) (xy 31.834806 78.400782) (xy 31.815093 78.37381)
(xy 31.799009 78.348212) (xy 31.783262 78.318752) (xy 31.755026 78.284346) (xy 31.727759 78.249153) (xy 31.702538 78.227243)
(xy 31.681166 78.205871) (xy 31.659256 78.18065) (xy 31.624072 78.15339) (xy 31.589657 78.125146) (xy 31.56019 78.109396)
(xy 31.534599 78.093316) (xy 31.507627 78.073603) (xy 31.46727 78.054861) (xy 31.427425 78.034979) (xy 31.395189 78.02618)
(xy 31.366659 78.016197) (xy 31.335973 78.002979) (xy 31.292439 77.993683) (xy 31.249193 77.983172) (xy 31.215814 77.981767)
(xy 31.215284 77.981707) (xy 31.21172 77.980626) (xy 31.16377 77.975903) (xy 31.141692 77.973416) (xy 31.137988 77.973364)
(xy 31.134291 77.973) (xy 31.112001 77.973) (xy 31.063897 77.972326) (xy 31.060241 77.973) (xy 30.938572 77.973)
(xy 30.945139 77.95886) (xy 30.965021 77.919015) (xy 30.973819 77.886782) (xy 30.983805 77.858246) (xy 30.997021 77.827563)
(xy 31.006313 77.784044) (xy 31.016828 77.740783) (xy 31.018233 77.707405) (xy 31.018293 77.706874) (xy 31.019374 77.70331)
(xy 31.024096 77.655366) (xy 31.026584 77.633283) (xy 31.026636 77.629578) (xy 31.027 77.625881) (xy 31.027 77.603592)
(xy 31.027674 77.555487) (xy 31.027 77.551831) (xy 31.027 76.275881) (xy 31.029549 76.25) (xy 31.019374 76.14669)
(xy 31.015541 76.134055) (xy 30.989239 76.04735) (xy 30.940304 75.955798) (xy 30.874448 75.875552) (xy 30.854345 75.859054)
(xy 26.560955 71.565666) (xy 26.544448 71.545552) (xy 26.464202 71.479696) (xy 26.425976 71.459264) (xy 26.399689 71.432977)
(xy 26.296996 71.36436) (xy 26.182889 71.317095) (xy 26.061754 71.293) (xy 25.938246 71.293) (xy 25.817111 71.317095)
(xy 25.703004 71.36436) (xy 25.600311 71.432977) (xy 25.512977 71.520311) (xy 25.44436 71.623004) (xy 25.397095 71.737111)
(xy 25.373 71.858246) (xy 25.373 71.981754) (xy 25.397095 72.102889) (xy 25.44436 72.216996) (xy 25.512977 72.319689)
(xy 25.600311 72.407023) (xy 25.703004 72.47564) (xy 25.817111 72.522905) (xy 25.938246 72.547) (xy 26.051711 72.547)
(xy 29.973001 76.468292) (xy 29.973 77.373) (xy 29.889759 77.373) (xy 29.886103 77.372326) (xy 29.837998 77.373)
(xy 29.815709 77.373) (xy 29.812012 77.373364) (xy 29.808307 77.373416) (xy 29.786224 77.375904) (xy 29.73828 77.380626)
(xy 29.734716 77.381707) (xy 29.734185 77.381767) (xy 29.700807 77.383172) (xy 29.657546 77.393687) (xy 29.614027 77.402979)
(xy 29.583344 77.416195) (xy 29.554808 77.426181) (xy 29.522575 77.434979) (xy 29.48273 77.454861) (xy 29.442373 77.473603)
(xy 29.415401 77.493316) (xy 29.389803 77.5094) (xy 29.360343 77.525147) (xy 29.325937 77.553383) (xy 29.290744 77.58065)
(xy 29.268834 77.605871) (xy 29.247462 77.627243) (xy 29.222241 77.649153) (xy 29.194981 77.684337) (xy 29.166737 77.718752)
(xy 29.150987 77.748219) (xy 29.134907 77.77381) (xy 29.115194 77.800782) (xy 29.096452 77.841139) (xy 29.07657 77.880984)
(xy 29.067771 77.91322) (xy 29.057789 77.941746) (xy 29.044572 77.97243) (xy 29.035275 78.015969) (xy 29.024763 78.059216)
(xy 29.023358 78.092593) (xy 29.019973 78.122637) (xy 29.013915 78.155495) (xy 29.01454 78.2) (xy 29.013915 78.244506)
(xy 29.019973 78.277364) (xy 29.023358 78.307408) (xy 29.024763 78.340783) (xy 29.035273 78.384023) (xy 29.044572 78.42757)
(xy 29.057789 78.458254) (xy 29.067771 78.486779) (xy 29.07657 78.519015) (xy 29.096452 78.55886) (xy 29.115194 78.599217)
(xy 29.134907 78.626189) (xy 29.150987 78.65178) (xy 29.166737 78.681247) (xy 29.194981 78.715662) (xy 29.222241 78.750846)
(xy 29.247462 78.772756) (xy 29.268834 78.794128) (xy 29.273935 78.8) (xy 29.268834 78.805871) (xy 29.247462 78.827243)
(xy 29.222241 78.849153) (xy 29.194981 78.884337) (xy 29.166737 78.918752) (xy 29.150987 78.948219) (xy 29.134907 78.97381)
(xy 29.115194 79.000782) (xy 29.096452 79.041139) (xy 29.07657 79.080984) (xy 29.067771 79.11322) (xy 29.057789 79.141746)
(xy 29.044572 79.17243) (xy 29.035275 79.215969) (xy 29.024763 79.259216) (xy 29.023358 79.292593) (xy 29.019973 79.322637)
(xy 29.013915 79.355495) (xy 29.01454 79.4) (xy 29.013915 79.444506) (xy 29.019973 79.477364) (xy 29.023358 79.507408)
(xy 29.024763 79.540783) (xy 29.035273 79.584023) (xy 29.044572 79.62757) (xy 29.057789 79.658254) (xy 29.067771 79.686779)
(xy 29.07657 79.719015) (xy 29.096452 79.75886) (xy 29.115194 79.799217) (xy 29.134907 79.826189) (xy 29.150987 79.85178)
(xy 29.166737 79.881247) (xy 29.194981 79.915662) (xy 29.222241 79.950846) (xy 29.247462 79.972756) (xy 29.268834 79.994128)
(xy 29.273935 80) (xy 29.268834 80.005871) (xy 29.247462 80.027243) (xy 29.222241 80.049153) (xy 29.194981 80.084337)
(xy 29.166737 80.118752) (xy 29.150987 80.148219) (xy 29.134907 80.17381) (xy 29.115194 80.200782) (xy 29.096452 80.241139)
(xy 29.07657 80.280984) (xy 29.067771 80.31322) (xy 29.057789 80.341746) (xy 29.044572 80.37243) (xy 29.035275 80.415969)
(xy 29.024763 80.459216) (xy 29.023358 80.492593) (xy 29.019973 80.522637) (xy 29.013915 80.555495) (xy 29.01454 80.6)
(xy 29.013915 80.644506) (xy 29.019973 80.677364) (xy 29.023358 80.707408) (xy 29.024763 80.740783) (xy 29.035273 80.784023)
(xy 29.044572 80.82757) (xy 29.057789 80.858254) (xy 29.067771 80.886779) (xy 29.07657 80.919015) (xy 29.096452 80.95886)
(xy 29.115194 80.999217) (xy 29.134907 81.026189) (xy 29.150987 81.05178) (xy 29.166737 81.081247) (xy 29.194981 81.115662)
(xy 29.222241 81.150846) (xy 29.247462 81.172756) (xy 29.268834 81.194128) (xy 29.273935 81.2) (xy 29.268834 81.205871)
(xy 29.247462 81.227243) (xy 29.222241 81.249153) (xy 29.194981 81.284337) (xy 29.166737 81.318752) (xy 29.150987 81.348219)
(xy 29.134907 81.37381) (xy 29.115194 81.400782) (xy 29.096452 81.441139) (xy 29.07657 81.480984) (xy 29.067771 81.51322)
(xy 29.057789 81.541746) (xy 29.044572 81.57243) (xy 29.035275 81.615969) (xy 29.024763 81.659216) (xy 29.023358 81.692593)
(xy 29.019973 81.722637) (xy 29.013915 81.755495) (xy 29.01454 81.8) (xy 29.013915 81.844506) (xy 29.019973 81.877364)
(xy 29.023358 81.907408) (xy 29.024763 81.940783) (xy 29.035273 81.984023) (xy 29.044572 82.02757) (xy 29.057789 82.058254)
(xy 29.067771 82.086779) (xy 29.07657 82.119015) (xy 29.096452 82.15886) (xy 29.115194 82.199217) (xy 29.134907 82.226189)
(xy 29.150987 82.25178) (xy 29.166737 82.281247) (xy 29.194981 82.315662) (xy 29.222241 82.350846) (xy 29.247462 82.372756)
(xy 29.268834 82.394128) (xy 29.290744 82.419349) (xy 29.325937 82.446616) (xy 29.360343 82.474852) (xy 29.389803 82.490599)
(xy 29.415401 82.506683) (xy 29.442373 82.526396) (xy 29.48273 82.545138) (xy 29.522575 82.56502) (xy 29.554808 82.573818)
(xy 29.583341 82.583803) (xy 29.61402 82.597018) (xy 29.657552 82.606314) (xy 29.700807 82.616827) (xy 29.734181 82.618232)
(xy 29.734712 82.618292) (xy 29.73828 82.619374) (xy 29.786244 82.624098) (xy 29.808299 82.626583) (xy 29.812003 82.626635)
(xy 29.815709 82.627) (xy 29.838007 82.627) (xy 29.886095 82.627675) (xy 29.889756 82.627) (xy 30.061427 82.627)
(xy 30.054861 82.641139) (xy 30.034979 82.680984) (xy 30.02618 82.71322) (xy 30.016195 82.741755) (xy 30.002979 82.772437)
(xy 29.993685 82.815962) (xy 29.983172 82.859216) (xy 29.981767 82.892597) (xy 29.981707 82.893131) (xy 29.980627 82.89669)
(xy 29.975911 82.944576) (xy 29.973416 82.966719) (xy 29.973364 82.970434) (xy 29.973001 82.974119) (xy 29.973001 82.996339)
(xy 29.972326 83.044514) (xy 29.973001 83.048175) (xy 29.973 84.84771) (xy 29.527 84.401711) (xy 29.527 84.02588)
(xy 29.529549 83.999999) (xy 29.519374 83.89669) (xy 29.489239 83.79735) (xy 29.485743 83.790809) (xy 29.440304 83.705798)
(xy 29.374448 83.625552) (xy 29.354339 83.609049) (xy 27.527 81.781711) (xy 27.527 81.348167) (xy 27.527675 81.344506)
(xy 27.527 81.296418) (xy 27.527 81.274119) (xy 27.526635 81.27041) (xy 27.526583 81.26671) (xy 27.524099 81.244661)
(xy 27.519374 81.19669) (xy 27.518292 81.193122) (xy 27.518232 81.192593) (xy 27.516827 81.159216) (xy 27.506313 81.115957)
(xy 27.497018 81.072429) (xy 27.483801 81.041746) (xy 27.473818 81.013217) (xy 27.46502 80.980984) (xy 27.445138 80.941139)
(xy 27.438572 80.927) (xy 27.651833 80.927) (xy 27.655494 80.927675) (xy 27.703582 80.927) (xy 27.725881 80.927)
(xy 27.729587 80.926635) (xy 27.733289 80.926583) (xy 27.755333 80.924099) (xy 27.80331 80.919374) (xy 27.806878 80.918292)
(xy 27.807407 80.918232) (xy 27.840784 80.916827) (xy 27.884031 80.906315) (xy 27.92757 80.897018) (xy 27.958254 80.883801)
(xy 27.98678 80.873819) (xy 28.019016 80.86502) (xy 28.058861 80.845138) (xy 28.099218 80.826396) (xy 28.12619 80.806683)
(xy 28.151781 80.790603) (xy 28.181248 80.774853) (xy 28.215663 80.746609) (xy 28.250847 80.719349) (xy 28.272757 80.694128)
(xy 28.294129 80.672756) (xy 28.31935 80.650846) (xy 28.346617 80.615653) (xy 28.374853 80.581247) (xy 28.3906 80.551787)
(xy 28.406684 80.526189) (xy 28.426397 80.499217) (xy 28.445139 80.45886) (xy 28.465021 80.419015) (xy 28.473819 80.386782)
(xy 28.483805 80.358246) (xy 28.497021 80.327563) (xy 28.506313 80.284044) (xy 28.516828 80.240783) (xy 28.518233 80.207405)
(xy 28.521619 80.177353) (xy 28.527674 80.144514) (xy 28.52705 80.1) (xy 28.527674 80.055487) (xy 28.521619 80.022644)
(xy 28.518233 79.992595) (xy 28.516828 79.959216) (xy 28.506313 79.915952) (xy 28.497021 79.872437) (xy 28.483807 79.841758)
(xy 28.473819 79.813217) (xy 28.465021 79.780984) (xy 28.445139 79.741139) (xy 28.426397 79.700782) (xy 28.406684 79.67381)
(xy 28.3906 79.648212) (xy 28.374853 79.618752) (xy 28.346617 79.584346) (xy 28.31935 79.549153) (xy 28.294129 79.527243)
(xy 28.272757 79.505871) (xy 28.267656 79.5) (xy 28.272757 79.494128) (xy 28.294129 79.472756) (xy 28.31935 79.450846)
(xy 28.346617 79.415653) (xy 28.374853 79.381247) (xy 28.3906 79.351787) (xy 28.406684 79.326189) (xy 28.426397 79.299217)
(xy 28.445139 79.25886) (xy 28.465021 79.219015) (xy 28.473819 79.186782) (xy 28.483805 79.158246) (xy 28.497021 79.127563)
(xy 28.506313 79.084044) (xy 28.516828 79.040783) (xy 28.518233 79.007405) (xy 28.521619 78.977353) (xy 28.527674 78.944514)
(xy 28.52705 78.9) (xy 28.527674 78.855487) (xy 28.521619 78.822644) (xy 28.518233 78.792595) (xy 28.516828 78.759216)
(xy 28.506313 78.715952) (xy 28.497021 78.672437) (xy 28.483807 78.641758) (xy 28.473819 78.613217) (xy 28.465021 78.580984)
(xy 28.445139 78.541139) (xy 28.426397 78.500782) (xy 28.406684 78.47381) (xy 28.3906 78.448212) (xy 28.374853 78.418752)
(xy 28.346617 78.384346) (xy 28.31935 78.349153) (xy 28.294129 78.327243) (xy 28.272757 78.305871) (xy 28.267656 78.3)
(xy 28.272757 78.294128) (xy 28.294129 78.272756) (xy 28.31935 78.250846) (xy 28.346617 78.215653) (xy 28.374853 78.181247)
(xy 28.3906 78.151787) (xy 28.406684 78.126189) (xy 28.426397 78.099217) (xy 28.445139 78.05886) (xy 28.465021 78.019015)
(xy 28.473819 77.986782) (xy 28.483805 77.958246) (xy 28.497021 77.927563) (xy 28.506313 77.884044) (xy 28.516828 77.840783)
(xy 28.518233 77.807405) (xy 28.521619 77.777353) (xy 28.527674 77.744514) (xy 28.52705 77.7) (xy 28.527674 77.655487)
(xy 28.521619 77.622644) (xy 28.518233 77.592595) (xy 28.516828 77.559216) (xy 28.506313 77.515952) (xy 28.497021 77.472437)
(xy 28.483807 77.441758) (xy 28.473819 77.413217) (xy 28.465021 77.380984) (xy 28.445139 77.341139) (xy 28.426397 77.300782)
(xy 28.406684 77.27381) (xy 28.3906 77.248212) (xy 28.374853 77.218752) (xy 28.346617 77.184346) (xy 28.31935 77.149153)
(xy 28.294129 77.127243) (xy 28.272757 77.105871) (xy 28.250847 77.08065) (xy 28.215663 77.05339) (xy 28.181248 77.025146)
(xy 28.151781 77.009396) (xy 28.12619 76.993316) (xy 28.099218 76.973603) (xy 28.058861 76.954861) (xy 28.019016 76.934979)
(xy 27.98678 76.92618) (xy 27.958245 76.916195) (xy 27.927563 76.902979) (xy 27.884038 76.893685) (xy 27.840784 76.883172)
(xy 27.807403 76.881767) (xy 27.806874 76.881707) (xy 27.80331 76.880626) (xy 27.755353 76.875903) (xy 27.733281 76.873416)
(xy 27.729578 76.873364) (xy 27.725881 76.873) (xy 27.70359 76.873) (xy 27.655486 76.872326) (xy 27.651831 76.873)
(xy 27.438571 76.873) (xy 27.445138 76.85886) (xy 27.46502 76.819015) (xy 27.473818 76.786782) (xy 27.483803 76.758249)
(xy 27.497018 76.72757) (xy 27.506314 76.684038) (xy 27.516827 76.640783) (xy 27.518232 76.607409) (xy 27.518292 76.606878)
(xy 27.519374 76.60331) (xy 27.524098 76.555346) (xy 27.526583 76.533291) (xy 27.526635 76.529587) (xy 27.527 76.525881)
(xy 27.527 76.503583) (xy 27.527675 76.455495) (xy 27.527 76.451834) (xy 27.527 74.65588) (xy 27.529549 74.629999)
(xy 27.519374 74.52669) (xy 27.489239 74.42735) (xy 27.440304 74.335798) (xy 27.413457 74.303085) (xy 27.374448 74.255552)
(xy 27.354339 74.239049) (xy 27.092962 73.977673) (xy 27.082905 73.927111) (xy 27.03564 73.813004) (xy 26.967023 73.710311)
(xy 26.879689 73.622977) (xy 26.776996 73.55436) (xy 26.662889 73.507095) (xy 26.541754 73.483) (xy 26.418246 73.483)
(xy 26.297111 73.507095) (xy 26.183004 73.55436) (xy 26.080311 73.622977) (xy 25.992977 73.710311) (xy 25.92436 73.813004)
(xy 25.877095 73.927111) (xy 25.853 74.048246) (xy 25.853 74.171754) (xy 25.877095 74.292889) (xy 25.92436 74.406996)
(xy 25.973621 74.48072) (xy 25.97331 74.480626) (xy 25.895881 74.473) (xy 25.87 74.470451) (xy 25.844119 74.473)
(xy 24.525881 74.473) (xy 24.5 74.470451) (xy 24.474119 74.473) (xy 24.39669 74.480626) (xy 24.29735 74.510761)
(xy 24.205798 74.559696) (xy 24.125552 74.625552) (xy 24.109053 74.645656) (xy 23.54566 75.209051) (xy 23.525552 75.225553)
(xy 23.4897 75.269239) (xy 23.459695 75.3058) (xy 23.41076 75.397352) (xy 23.380625 75.496692) (xy 23.37045 75.600001)
(xy 23.373 75.625891) (xy 23.372999 76.373001) (xy 23.248168 76.373001) (xy 23.244513 76.372327) (xy 23.196408 76.373001)
(xy 23.174118 76.373001) (xy 23.170421 76.373365) (xy 23.166717 76.373417) (xy 23.144638 76.375905) (xy 23.096689 76.380627)
(xy 23.093125 76.381708) (xy 23.092594 76.381768) (xy 23.059215 76.383173) (xy 23.015951 76.393688) (xy 22.972436 76.40298)
(xy 22.941757 76.416194) (xy 22.913216 76.426182) (xy 22.880983 76.43498) (xy 22.841138 76.454862) (xy 22.800781 76.473604)
(xy 22.773809 76.493317) (xy 22.748211 76.509401) (xy 22.718751 76.525148) (xy 22.684345 76.553384) (xy 22.649152 76.580651)
(xy 22.627242 76.605872) (xy 22.60587 76.627244) (xy 22.580649 76.649154) (xy 22.553389 76.684338) (xy 22.525145 76.718753)
(xy 22.509395 76.74822) (xy 22.493315 76.773811) (xy 22.473602 76.800783) (xy 22.45486 76.84114) (xy 22.434978 76.880985)
(xy 22.426179 76.913221) (xy 22.416194 76.941756) (xy 22.402978 76.972438) (xy 22.393684 77.015963) (xy 22.383171 77.059217)
(xy 22.381766 77.092598) (xy 22.378381 77.122644) (xy 22.372325 77.155488) (xy 21.527 77.155488) (xy 21.527 69.408246)
(xy 25.253 69.408246) (xy 25.253 69.531754) (xy 25.277095 69.652889) (xy 25.32436 69.766996) (xy 25.392977 69.869689)
(xy 25.480311 69.957023) (xy 25.583004 70.02564) (xy 25.697111 70.072905) (xy 25.747673 70.082962) (xy 27.398564 71.733854)
(xy 27.398569 71.733858) (xy 28.199764 72.535054) (xy 28.201876 72.538121) (xy 28.236401 72.571691) (xy 28.252126 72.587416)
(xy 28.254994 72.58977) (xy 28.257658 72.59236) (xy 28.275046 72.606226) (xy 28.312269 72.636775) (xy 28.315557 72.638533)
(xy 28.31597 72.638861) (xy 28.340564 72.661469) (xy 28.378587 72.684623) (xy 28.41594 72.708831) (xy 28.446977 72.721179)
(xy 28.474223 72.734301) (xy 28.503226 72.750865) (xy 28.545424 72.76497) (xy 28.587248 72.780267) (xy 28.620263 72.785401)
(xy 28.649725 72.792125) (xy 28.681703 72.801826) (xy 28.726028 72.806192) (xy 28.770159 72.811792) (xy 28.803472 72.809452)
(xy 28.833731 72.809452) (xy 28.841474 72.809996) (xy 28.842018 72.817741) (xy 28.842018 72.847994) (xy 28.839678 72.881312)
(xy 28.845279 72.92545) (xy 28.849644 72.969766) (xy 28.859343 73.001739) (xy 28.866071 73.031216) (xy 28.871202 73.064214)
(xy 28.886492 73.106021) (xy 28.900605 73.148244) (xy 28.917168 73.177245) (xy 28.93029 73.204493) (xy 28.94264 73.235532)
(xy 28.966845 73.272881) (xy 28.989996 73.310899) (xy 29.012602 73.335492) (xy 29.012941 73.335917) (xy 29.014696 73.339201)
(xy 29.045223 73.376397) (xy 29.059113 73.393815) (xy 29.061706 73.396481) (xy 29.064055 73.399344) (xy 29.079761 73.41505)
(xy 29.113352 73.449596) (xy 29.116419 73.451708) (xy 31.973001 76.308291) (xy 31.973 83.956619) (xy 31.970451 83.9825)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 31.974546 84.024073) (xy 31.980626 84.085809) (xy 32.010761 84.185149) (xy 32.059696 84.276702) (xy 32.125552 84.356948)
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(xy 32.145666 84.373455) (xy 40.386554 92.614345) (xy 40.403052 92.634448) (xy 40.483298 92.700304) (xy 40.57485 92.749239)
(xy 40.67419 92.779374) (xy 40.7775 92.789549) (xy 40.803381 92.787) (xy 42.520141 92.787) (xy 42.563004 92.81564)
(xy 42.677111 92.862905) (xy 42.798246 92.887) (xy 42.921754 92.887) (xy 43.042889 92.862905) (xy 43.156996 92.81564)
(xy 43.259689 92.747023) (xy 43.347023 92.659689) (xy 43.41564 92.556996) (xy 43.462905 92.442889) (xy 43.487 92.321754)
(xy 43.487 92.198246) (xy 43.462905 92.077111) (xy 43.41564 91.963004) (xy 43.347023 91.860311) (xy 43.259689 91.772977)
(xy 43.156996 91.70436) (xy 43.042889 91.657095) (xy 42.921754 91.633) (xy 42.798246 91.633) (xy 42.677111 91.657095)
(xy 42.563004 91.70436) (xy 42.520141 91.733) (xy 40.995791 91.733) (xy 34.244873 84.982083) (xy 34.356996 84.93564)
(xy 34.459689 84.867023) (xy 34.547023 84.779689) (xy 34.61564 84.676996) (xy 34.662905 84.562889) (xy 34.687 84.441754)
(xy 34.687 84.318246) (xy 34.662905 84.197111) (xy 34.61564 84.083004) (xy 34.547023 83.980311) (xy 34.459689 83.892977)
(xy 34.356996 83.82436) (xy 34.242889 83.777095) (xy 34.192328 83.767038) (xy 33.777001 83.351712) (xy 33.777001 79.563922)
(xy 33.796996 79.55564) (xy 33.899689 79.487023) (xy 33.987023 79.399689) (xy 34.05564 79.296996) (xy 34.102905 79.182889)
(xy 34.127 79.061754) (xy 34.127 78.938246) (xy 34.102905 78.817111) (xy 34.05564 78.703004) (xy 33.987023 78.600311)
(xy 33.899689 78.512977) (xy 33.796996 78.44436) (xy 33.682889 78.397095) (xy 33.561754 78.373) (xy 33.438246 78.373)
(xy 33.317111 78.397095) (xy 33.203004 78.44436) (xy 33.100311 78.512977) (xy 33.027 78.586288) (xy 33.027 76.115877)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 33.029549 76.089999) (xy 33.026564 76.059696) (xy 33.019374 75.98669) (xy 32.989239 75.88735) (xy 32.940304 75.795798)
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(xy 32.874448 75.715552) (xy 32.854339 75.699049) (xy 29.981427 72.826138) (xy 29.991963 72.814676) (xy 30.015112 72.776661)
(xy 30.039324 72.739302) (xy 30.051674 72.708262) (xy 30.064795 72.681017) (xy 30.081359 72.652014) (xy 30.095464 72.609816)
(xy 30.110761 72.567992) (xy 30.115895 72.534977) (xy 30.122619 72.505515) (xy 30.13232 72.473537) (xy 30.136686 72.429212)
(xy 30.138605 72.414086) (xy 35.3177 72.414086) (xy 35.3177 72.585914) (xy 35.351222 72.754441) (xy 35.416977 72.913189)
(xy 35.51244 73.056059) (xy 35.633941 73.17756) (xy 35.776811 73.273023) (xy 35.935559 73.338778) (xy 36.104086 73.3723)
(xy 36.275914 73.3723) (xy 36.444441 73.338778) (xy 36.603189 73.273023) (xy 36.746059 73.17756) (xy 36.86756 73.056059)
(xy 36.963023 72.913189) (xy 37.028778 72.754441) (xy 37.0623 72.585914) (xy 37.0623 72.414086) (xy 37.028778 72.245559)
(xy 36.963023 72.086811) (xy 36.86756 71.943941) (xy 36.746059 71.82244) (xy 36.603189 71.726977) (xy 36.444441 71.661222)
(xy 36.275914 71.6277) (xy 36.104086 71.6277) (xy 35.935559 71.661222) (xy 35.776811 71.726977) (xy 35.633941 71.82244)
(xy 35.51244 71.943941) (xy 35.416977 72.086811) (xy 35.351222 72.245559) (xy 35.3177 72.414086) (xy 30.138605 72.414086)
(xy 30.142286 72.385081) (xy 30.139946 72.351768) (xy 30.139946 72.321508) (xy 30.142286 72.288195) (xy 30.136685 72.244061)
(xy 30.13232 72.19974) (xy 30.12262 72.167765) (xy 30.115895 72.138299) (xy 30.110761 72.105284) (xy 30.095464 72.06346)
(xy 30.081359 72.021262) (xy 30.064795 71.992259) (xy 30.051674 71.965014) (xy 30.039324 71.933974) (xy 30.015112 71.896615)
(xy 29.991963 71.8586) (xy 29.969357 71.834007) (xy 29.950501 71.810363) (xy 29.93156 71.782858) (xy 29.899645 71.751826)
(xy 29.868613 71.719911) (xy 29.841109 71.70097) (xy 29.817456 71.682108) (xy 29.792863 71.659502) (xy 29.754845 71.636351)
(xy 29.717496 71.612146) (xy 29.686457 71.599796) (xy 29.659209 71.586674) (xy 29.630208 71.570111) (xy 29.587985 71.555998)
(xy 29.546178 71.540708) (xy 29.51318 71.535577) (xy 29.483707 71.52885) (xy 29.451731 71.51915) (xy 29.40741 71.514785)
(xy 29.363276 71.509184) (xy 29.329958 71.511524) (xy 29.299704 71.511524) (xy 29.266386 71.509184) (xy 29.222251 71.514785)
(xy 29.177932 71.51915) (xy 29.145956 71.52885) (xy 29.116484 71.535577) (xy 29.083485 71.540708) (xy 29.041694 71.555992)
(xy 28.999454 71.570111) (xy 28.970442 71.586681) (xy 28.94322 71.599791) (xy 28.912168 71.612145) (xy 28.874809 71.636357)
(xy 28.8368 71.659502) (xy 28.825333 71.670043) (xy 28.143858 70.988569) (xy 28.143854 70.988564) (xy 26.492962 69.337673)
(xy 26.482905 69.287111) (xy 26.43564 69.173004) (xy 26.367023 69.070311) (xy 26.279689 68.982977) (xy 26.176996 68.91436)
(xy 26.062889 68.867095) (xy 25.941754 68.843) (xy 25.818246 68.843) (xy 25.697111 68.867095) (xy 25.583004 68.91436)
(xy 25.480311 68.982977) (xy 25.392977 69.070311) (xy 25.32436 69.173004) (xy 25.277095 69.287111) (xy 25.253 69.408246)
(xy 21.527 69.408246) (xy 21.527 66.49375) (xy 31.146176 66.49375) (xy 31.146176 66.93125) (xy 31.157658 67.047831)
(xy 31.191664 67.159932) (xy 31.246885 67.263244) (xy 31.321201 67.353799) (xy 31.411756 67.428115) (xy 31.515068 67.483336)
(xy 31.570001 67.5) (xy 31.515068 67.516664) (xy 31.411756 67.571885) (xy 31.321201 67.646201) (xy 31.246885 67.736756)
(xy 31.191664 67.840068) (xy 31.157658 67.952169) (xy 31.146176 68.06875) (xy 31.146176 68.50625) (xy 31.157658 68.622831)
(xy 31.191664 68.734932) (xy 31.246885 68.838244) (xy 31.321201 68.928799) (xy 31.411756 69.003115) (xy 31.515068 69.058336)
(xy 31.627169 69.092342) (xy 31.74375 69.103824) (xy 32.25625 69.103824) (xy 32.372831 69.092342) (xy 32.484932 69.058336)
(xy 32.588244 69.003115) (xy 32.678799 68.928799) (xy 32.753115 68.838244) (xy 32.765806 68.8145) (xy 33.376619 68.8145)
(xy 33.4025 68.817049) (xy 33.428381 68.8145) (xy 33.50581 68.806874) (xy 33.60515 68.776739) (xy 33.696702 68.727804)
(xy 33.776948 68.661948) (xy 33.793455 68.641834) (xy 33.942327 68.492962) (xy 33.992889 68.482905) (xy 34.106996 68.43564)
(xy 34.194757 68.377) (xy 37.23171 68.377) (xy 37.634053 68.779344) (xy 37.650552 68.799448) (xy 37.675813 68.820179)
(xy 37.691664 68.872432) (xy 37.746885 68.975744) (xy 37.821201 69.066299) (xy 37.911756 69.140615) (xy 38.015068 69.195836)
(xy 38.070001 69.2125) (xy 38.015068 69.229164) (xy 37.911756 69.284385) (xy 37.821201 69.358701) (xy 37.746885 69.449256)
(xy 37.700695 69.535672) (xy 37.694329 69.503667) (xy 37.576398 69.218955) (xy 37.405188 68.962721) (xy 37.187279 68.744812)
(xy 36.931045 68.573602) (xy 36.646333 68.455671) (xy 36.344085 68.39555) (xy 36.035915 68.39555) (xy 35.733667 68.455671)
(xy 35.448955 68.573602) (xy 35.192721 68.744812) (xy 34.974812 68.962721) (xy 34.803602 69.218955) (xy 34.685671 69.503667)
(xy 34.62555 69.805915) (xy 34.62555 70.114085) (xy 34.685671 70.416333) (xy 34.803602 70.701045) (xy 34.974812 70.957279)
(xy 35.192721 71.175188) (xy 35.448955 71.346398) (xy 35.733667 71.464329) (xy 36.035915 71.52445) (xy 36.344085 71.52445)
(xy 36.646333 71.464329) (xy 36.931045 71.346398) (xy 37.157108 71.195347) (xy 37.17436 71.236996) (xy 37.203 71.279859)
(xy 37.203 73.840533) (xy 37.187279 73.824812) (xy 36.931045 73.653602) (xy 36.646333 73.535671) (xy 36.344085 73.47555)
(xy 36.035915 73.47555) (xy 35.733667 73.535671) (xy 35.448955 73.653602) (xy 35.192721 73.824812) (xy 34.974812 74.042721)
(xy 34.803602 74.298955) (xy 34.685671 74.583667) (xy 34.62555 74.885915) (xy 34.62555 75.194085) (xy 34.685671 75.496333)
(xy 34.803602 75.781045) (xy 34.974812 76.037279) (xy 35.192721 76.255188) (xy 35.448955 76.426398) (xy 35.733667 76.544329)
(xy 36.035915 76.60445) (xy 36.344085 76.60445) (xy 36.646333 76.544329) (xy 36.931045 76.426398) (xy 37.187279 76.255188)
(xy 37.203 76.239467) (xy 37.203001 84.984109) (xy 37.200451 85.01) (xy 37.210626 85.113309) (xy 37.240761 85.212649)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 37.289696 85.304201) (xy 37.289697 85.304202) (xy 37.355553 85.384448) (xy 37.375662 85.400951) (xy 44.753 92.77829)
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(xy 44.753001 94.260557) (xy 44.753 94.260567) (xy 44.753 94.300141) (xy 44.72436 94.343004) (xy 44.677095 94.457111)
(xy 44.653 94.578246) (xy 44.653 94.701754) (xy 44.677095 94.822889) (xy 44.72436 94.936996) (xy 44.792977 95.039689)
(xy 44.880311 95.127023) (xy 44.983004 95.19564) (xy 45.097111 95.242905) (xy 45.218246 95.267) (xy 45.341754 95.267)
(xy 45.462889 95.242905) (xy 45.576996 95.19564) (xy 45.679689 95.127023) (xy 45.767023 95.039689) (xy 45.83564 94.936996)
(xy 45.882905 94.822889) (xy 45.907 94.701754) (xy 45.907 94.578246) (xy 45.882905 94.457111) (xy 45.83564 94.343004)
(xy 45.807 94.300141) (xy 45.807 92.840158) (xy 48.733421 95.766579) (xy 48.79055 95.813464) (xy 48.855728 95.848303)
(xy 48.926451 95.869756) (xy 49 95.877) (xy 49.073549 95.869756) (xy 49.144272 95.848303) (xy 49.20945 95.813464)
(xy 49.266579 95.766579) (xy 50.266579 94.766579) (xy 50.313464 94.70945) (xy 50.348303 94.644272) (xy 50.369756 94.573549)
(xy 50.377 94.5) (xy 50.377 93.377) (xy 51.5 93.377) (xy 51.573549 93.369756) (xy 51.644272 93.348303)
(xy 51.70945 93.313464) (xy 51.766579 93.266579) (xy 51.813464 93.20945) (xy 51.848303 93.144272) (xy 51.869756 93.073549)
(xy 51.877 93) (xy 51.877 91.628246) (xy 53.193 91.628246) (xy 53.193 91.751754) (xy 53.217095 91.872889)
(xy 53.26436 91.986996) (xy 53.332977 92.089689) (xy 53.420311 92.177023) (xy 53.523004 92.24564) (xy 53.637111 92.292905)
(xy 53.758246 92.317) (xy 53.881754 92.317) (xy 54.002889 92.292905) (xy 54.116996 92.24564) (xy 54.219689 92.177023)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 54.307023 92.089689) (xy 54.37564 91.986996) (xy 54.422905 91.872889) (xy 54.447 91.751754) (xy 54.447 91.697225)
(xy 59.400475 86.74375) (xy 69.646176 86.74375) (xy 69.646176 87.18125) (xy 69.657658 87.297831) (xy 69.691664 87.409932)
(xy 69.746885 87.513244) (xy 69.821201 87.603799) (xy 69.911756 87.678115) (xy 70.015068 87.733336) (xy 70.070001 87.75)
(xy 70.015068 87.766664) (xy 69.911756 87.821885) (xy 69.821201 87.896201) (xy 69.746885 87.986756) (xy 69.691664 88.090068)
(xy 69.657658 88.202169) (xy 69.646176 88.31875) (xy 69.646176 88.75625) (xy 69.657658 88.872831) (xy 69.691664 88.984932)
(xy 69.746885 89.088244) (xy 69.821201 89.178799) (xy 69.911756 89.253115) (xy 70.015068 89.308336) (xy 70.127169 89.342342)
(xy 70.24375 89.353824) (xy 70.75625 89.353824) (xy 70.872831 89.342342) (xy 70.984932 89.308336) (xy 71.088244 89.253115)
(xy 71.178799 89.178799) (xy 71.253115 89.088244) (xy 71.308336 88.984932) (xy 71.324187 88.932679) (xy 71.349448 88.911948)
(xy 71.365955 88.891834) (xy 71.890791 88.366999) (xy 72.223985 88.366999) (xy 72.162647 88.458798) (xy 72.070153 88.682097)
(xy 72.023 88.919151) (xy 72.023 89.160849) (xy 72.070153 89.397903) (xy 72.162647 89.621202) (xy 72.296927 89.822167)
(xy 72.467833 89.993073) (xy 72.668798 90.127353) (xy 72.892097 90.219847) (xy 73.129151 90.267) (xy 73.370849 90.267)
(xy 73.607903 90.219847) (xy 73.662106 90.197395) (xy 75.069049 91.604339) (xy 75.085552 91.624448) (xy 75.165428 91.69)
(xy 75.165798 91.690304) (xy 75.25735 91.739239) (xy 75.35669 91.769374) (xy 75.46 91.779549) (xy 75.485881 91.777)
(xy 76.410141 91.777) (xy 76.453004 91.80564) (xy 76.567111 91.852905) (xy 76.688246 91.877) (xy 76.811754 91.877)
(xy 76.932889 91.852905) (xy 77.046996 91.80564) (xy 77.149689 91.737023) (xy 77.237023 91.649689) (xy 77.30564 91.546996)
(xy 77.352905 91.432889) (xy 77.377 91.311754) (xy 77.377 91.188246) (xy 77.352905 91.067111) (xy 77.30564 90.953004)
(xy 77.237023 90.850311) (xy 77.149689 90.762977) (xy 77.046996 90.69436) (xy 76.932889 90.647095) (xy 76.811754 90.623)
(xy 76.688246 90.623) (xy 76.567111 90.647095) (xy 76.453004 90.69436) (xy 76.410141 90.723) (xy 75.67829 90.723)
(xy 74.407395 89.452106) (xy 74.429847 89.397903) (xy 74.477 89.160849) (xy 74.477 88.919151) (xy 74.429847 88.682097)
(xy 74.337353 88.458798) (xy 74.276015 88.366999) (xy 74.37171 88.366999) (xy 74.585657 88.580947) (xy 74.585662 88.580951)
(xy 74.632605 88.627894) (xy 74.610153 88.682097) (xy 74.563 88.919151) (xy 74.563 89.160849) (xy 74.610153 89.397903)
(xy 74.702647 89.621202) (xy 74.836927 89.822167) (xy 75.007833 89.993073) (xy 75.208798 90.127353) (xy 75.432097 90.219847)
(xy 75.669151 90.267) (xy 75.910849 90.267) (xy 76.147903 90.219847) (xy 76.371202 90.127353) (xy 76.572167 89.993073)
(xy 76.743073 89.822167) (xy 76.877353 89.621202) (xy 76.969847 89.397903) (xy 77.017 89.160849) (xy 77.017 88.919151)
(xy 76.969847 88.682097) (xy 76.93704 88.602895) (xy 77.587543 87.952393) (xy 77.606684 87.936684) (xy 77.622392 87.917544)
(xy 77.6224 87.917536) (xy 77.669416 87.860246) (xy 77.669466 87.860153) (xy 77.716031 87.773036) (xy 77.744736 87.678409)
(xy 77.752 87.604653) (xy 77.752 87.604643) (xy 77.754427 87.58) (xy 77.752 87.555357) (xy 77.752 85.377254)
(xy 77.80564 85.296976) (xy 77.852905 85.182869) (xy 77.877 85.061734) (xy 77.877 84.938226) (xy 77.852905 84.817091)
(xy 77.80564 84.702984) (xy 77.737023 84.600291) (xy 77.649689 84.512957) (xy 77.546996 84.44434) (xy 77.432889 84.397075)
(xy 77.311754 84.37298) (xy 77.188246 84.37298) (xy 77.067111 84.397075) (xy 76.953004 84.44434) (xy 76.850311 84.512957)
(xy 76.762977 84.600291) (xy 76.69436 84.702984) (xy 76.647095 84.817091) (xy 76.623 84.938226) (xy 76.623 85.061734)
(xy 76.647095 85.182869) (xy 76.69436 85.296976) (xy 76.748001 85.377256) (xy 76.748001 85.725208) (xy 76.743073 85.717833)
(xy 76.572167 85.546927) (xy 76.371202 85.412647) (xy 76.147903 85.320153) (xy 75.910849 85.273) (xy 75.669151 85.273)
(xy 75.432097 85.320153) (xy 75.208798 85.412647) (xy 75.007833 85.546927) (xy 74.836927 85.717833) (xy 74.702647 85.918798)
(xy 74.610153 86.142097) (xy 74.563 86.379151) (xy 74.563 86.620849) (xy 74.610153 86.857903) (xy 74.702647 87.081202)
(xy 74.836927 87.282167) (xy 75.007833 87.453073) (xy 75.208798 87.587353) (xy 75.432097 87.679847) (xy 75.669151 87.727)
(xy 75.910849 87.727) (xy 76.147903 87.679847) (xy 76.371202 87.587353) (xy 76.572167 87.453073) (xy 76.743073 87.282167)
(xy 76.748 87.274793) (xy 76.748 87.372064) (xy 76.227105 87.89296) (xy 76.147903 87.860153) (xy 75.910849 87.813)
(xy 75.669151 87.813) (xy 75.432097 87.860153) (xy 75.377894 87.882605) (xy 75.330951 87.835662) (xy 75.330947 87.835657)
(xy 74.980954 87.485665) (xy 74.964447 87.465551) (xy 74.884201 87.399695) (xy 74.792649 87.35076) (xy 74.693309 87.320625)
(xy 74.61588 87.312999) (xy 74.589999 87.31045) (xy 74.564118 87.312999) (xy 74.478824 87.312999) (xy 74.478824 85.65)
(xy 74.471545 85.576095) (xy 74.449988 85.50503) (xy 74.414981 85.439537) (xy 74.367869 85.382131) (xy 74.310463 85.335019)
(xy 74.24497 85.300012) (xy 74.173905 85.278455) (xy 74.1 85.271176) (xy 72.4 85.271176) (xy 72.326095 85.278455)
(xy 72.25503 85.300012) (xy 72.189537 85.335019) (xy 72.132131 85.382131) (xy 72.085019 85.439537) (xy 72.050012 85.50503)
(xy 72.028455 85.576095) (xy 72.021176 85.65) (xy 72.021176 86.4355) (xy 71.265806 86.4355) (xy 71.253115 86.411756)
(xy 71.178799 86.321201) (xy 71.088244 86.246885) (xy 70.984932 86.191664) (xy 70.872831 86.157658) (xy 70.75625 86.146176)
(xy 70.24375 86.146176) (xy 70.127169 86.157658) (xy 70.015068 86.191664) (xy 69.911756 86.246885) (xy 69.821201 86.321201)
(xy 69.746885 86.411756) (xy 69.691664 86.515068) (xy 69.657658 86.627169) (xy 69.646176 86.74375) (xy 59.400475 86.74375)
(xy 64.067226 82.077) (xy 74.657447 82.077) (xy 74.722819 82.142372) (xy 74.858269 82.232877) (xy 75.008773 82.295218)
(xy 75.168548 82.327) (xy 75.331452 82.327) (xy 75.491227 82.295218) (xy 75.641731 82.232877) (xy 75.777181 82.142372)
(xy 75.892372 82.027181) (xy 75.982877 81.891731) (xy 76.045218 81.741227) (xy 76.077 81.581452) (xy 76.077 81.418548)
(xy 76.045218 81.258773) (xy 75.982877 81.108269) (xy 75.892372 80.972819) (xy 75.777181 80.857628) (xy 75.641731 80.767123)
(xy 75.491227 80.704782) (xy 75.331452 80.673) (xy 75.168548 80.673) (xy 75.008773 80.704782) (xy 74.858269 80.767123)
(xy 74.722819 80.857628) (xy 74.657447 80.923) (xy 63.856552 80.923) (xy 63.828223 80.92021) (xy 63.799894 80.923)
(xy 63.799888 80.923) (xy 63.715112 80.93135) (xy 63.606348 80.964343) (xy 63.506109 81.017921) (xy 63.462871 81.053406)
(xy 63.440259 81.071963) (xy 63.440257 81.071965) (xy 63.41825 81.090026) (xy 63.400189 81.112033) (xy 53.432038 91.080185)
(xy 53.410026 91.09825) (xy 53.337921 91.18611) (xy 53.284343 91.286349) (xy 53.274272 91.319549) (xy 53.251349 91.395113)
(xy 53.247563 91.433554) (xy 53.217095 91.507111) (xy 53.193 91.628246) (xy 51.877 91.628246) (xy 51.877 91.25)
(xy 51.869756 91.176451) (xy 51.848303 91.105728) (xy 51.813464 91.04055) (xy 51.766579 90.983421) (xy 51.70945 90.936536)
(xy 51.644272 90.901697) (xy 51.573549 90.880244) (xy 51.5 90.873) (xy 51.129019 90.873) (xy 51.045 90.864725)
(xy 50.960981 90.873) (xy 49.587 90.873) (xy 49.587 84.973879) (xy 49.589549 84.948001) (xy 49.585806 84.91)
(xy 49.579374 84.844692) (xy 49.549239 84.745352) (xy 49.500304 84.6538) (xy 49.434448 84.573554) (xy 49.414334 84.557047)
(xy 49.347 84.489713) (xy 49.347 84.157881) (xy 49.349549 84.132) (xy 49.339374 84.02869) (xy 49.330671 84)
(xy 49.309239 83.92935) (xy 49.260304 83.837798) (xy 49.194448 83.757552) (xy 49.174339 83.741049) (xy 48.997 83.563711)
(xy 48.997 83.271789) (xy 49.007869 83.262869) (xy 49.054981 83.205463) (xy 49.089988 83.13997) (xy 49.1 83.106964)
(xy 49.110012 83.13997) (xy 49.145019 83.205463) (xy 49.192131 83.262869) (xy 49.207383 83.275386) (xy 49.205451 83.295)
(xy 49.215626 83.398309) (xy 49.245761 83.497649) (xy 49.294696 83.589201) (xy 49.294697 83.589202) (xy 49.360553 83.669448)
(xy 49.380661 83.68595) (xy 49.633 83.93829) (xy 49.633001 88.876107) (xy 49.630451 88.901998) (xy 49.640626 89.005307)
(xy 49.670761 89.104647) (xy 49.714751 89.186947) (xy 49.719697 89.1962) (xy 49.785553 89.276446) (xy 49.805662 89.292949)
(xy 50.065881 89.553168) (xy 50.063004 89.55436) (xy 49.960311 89.622977) (xy 49.872977 89.710311) (xy 49.80436 89.813004)
(xy 49.757095 89.927111) (xy 49.733 90.048246) (xy 49.733 90.171754) (xy 49.757095 90.292889) (xy 49.80436 90.406996)
(xy 49.872977 90.509689) (xy 49.960311 90.597023) (xy 50.063004 90.66564) (xy 50.177111 90.712905) (xy 50.298246 90.737)
(xy 50.421754 90.737) (xy 50.542889 90.712905) (xy 50.656996 90.66564) (xy 50.699859 90.637) (xy 52.564119 90.637)
(xy 52.59 90.639549) (xy 52.615881 90.637) (xy 52.69331 90.629374) (xy 52.79265 90.599239) (xy 52.884202 90.550304)
(xy 52.964448 90.484448) (xy 52.980955 90.464334) (xy 64.604339 78.840951) (xy 64.624448 78.824448) (xy 64.690304 78.744202)
(xy 64.739239 78.65265) (xy 64.769374 78.55331) (xy 64.774391 78.502374) (xy 64.779549 78.450001) (xy 64.777 78.42412)
(xy 64.777 77.839875) (xy 64.80564 77.797012) (xy 64.852905 77.682905) (xy 64.877 77.56177) (xy 64.877 77.438262)
(xy 64.852905 77.317127) (xy 64.80564 77.20302) (xy 64.737023 77.100327) (xy 64.649689 77.012993) (xy 64.546996 76.944376)
(xy 64.432889 76.897111) (xy 64.311754 76.873016) (xy 64.188246 76.873016) (xy 64.067111 76.897111) (xy 63.953004 76.944376)
(xy 63.850311 77.012993) (xy 63.762977 77.100327) (xy 63.69436 77.20302) (xy 63.647095 77.317127) (xy 63.623 77.438262)
(xy 63.623 77.56177) (xy 63.647095 77.682905) (xy 63.69436 77.797012) (xy 63.723 77.839876) (xy 63.723001 78.231709)
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(xy 53.711994 88.242717) (xy 53.697023 88.220311) (xy 53.609689 88.132977) (xy 53.506996 88.06436) (xy 53.392889 88.017095)
(xy 53.271754 87.993) (xy 53.148246 87.993) (xy 53.027111 88.017095) (xy 52.913004 88.06436) (xy 52.810311 88.132977)
(xy 52.722977 88.220311) (xy 52.65436 88.323004) (xy 52.607095 88.437111) (xy 52.597038 88.487671) (xy 52.20171 88.883)
(xy 51.778798 88.883) (xy 51.787002 88.841754) (xy 51.787002 88.718246) (xy 51.762907 88.597111) (xy 51.715642 88.483004)
(xy 51.687002 88.440141) (xy 51.687002 85.318287) (xy 52.678291 84.327) (xy 53.550141 84.327) (xy 53.593004 84.35564)
(xy 53.707111 84.402905) (xy 53.828246 84.427) (xy 53.951754 84.427) (xy 54.072889 84.402905) (xy 54.186996 84.35564)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 54.289689 84.287023) (xy 54.377023 84.199689) (xy 54.408015 84.153306) (xy 54.933 84.678291) (xy 54.933 84.910141)
(xy 54.90436 84.953004) (xy 54.857095 85.067111) (xy 54.833 85.188246) (xy 54.833 85.311754) (xy 54.857095 85.432889)
(xy 54.90436 85.546996) (xy 54.972977 85.649689) (xy 55.060311 85.737023) (xy 55.163004 85.80564) (xy 55.277111 85.852905)
(xy 55.398246 85.877) (xy 55.521754 85.877) (xy 55.642889 85.852905) (xy 55.756996 85.80564) (xy 55.859689 85.737023)
(xy 55.947023 85.649689) (xy 56.01564 85.546996) (xy 56.062905 85.432889) (xy 56.087 85.311754) (xy 56.087 85.188246)
(xy 56.062905 85.067111) (xy 56.01564 84.953004) (xy 55.987 84.910141) (xy 55.987 84.485881) (xy 55.989549 84.46)
(xy 55.979374 84.35669) (xy 55.975964 84.34545) (xy 55.967025 84.315983) (xy 56.033066 84.271856) (xy 56.1204 84.184522)
(xy 56.189017 84.081829) (xy 56.236282 83.967722) (xy 56.260377 83.846587) (xy 56.260377 83.723079) (xy 56.236282 83.601944)
(xy 56.189017 83.487837) (xy 56.1204 83.385144) (xy 56.033066 83.29781) (xy 55.930373 83.229193) (xy 55.816266 83.181928)
(xy 55.765706 83.171871) (xy 54.537 81.943167) (xy 54.537 75.50829) (xy 54.934346 75.110945) (xy 54.954448 75.094448)
(xy 55.020304 75.014202) (xy 55.069239 74.92265) (xy 55.099374 74.82331) (xy 55.107 74.745881) (xy 55.107 74.74588)
(xy 55.109549 74.72) (xy 55.107 74.694119) (xy 55.107 71.965881) (xy 55.109549 71.94) (xy 55.099374 71.83669)
(xy 55.095051 71.82244) (xy 55.069239 71.73735) (xy 55.020304 71.645798) (xy 54.954448 71.565552) (xy 54.934344 71.549053)
(xy 54.190955 70.805666) (xy 54.174448 70.785552) (xy 54.094202 70.719696) (xy 54.00265 70.670761) (xy 53.90331 70.640626)
(xy 53.825881 70.633) (xy 53.8 70.630451) (xy 53.774119 70.633) (xy 49.915877 70.633) (xy 49.889999 70.630451)
(xy 49.864121 70.633) (xy 49.864119 70.633) (xy 49.78669 70.640626) (xy 49.68735 70.670761) (xy 49.595798 70.719696)
(xy 49.515552 70.785552) (xy 49.499049 70.805661) (xy 48.110662 72.194049) (xy 48.090553 72.210552) (xy 48.035883 72.277168)
(xy 48.024696 72.290799) (xy 47.975761 72.382351) (xy 47.945626 72.481691) (xy 47.935451 72.585) (xy 47.938001 72.61089)
(xy 47.938001 73.564107) (xy 47.922131 73.577131) (xy 47.875019 73.634537) (xy 47.840012 73.70003) (xy 47.83 73.733036)
(xy 47.819988 73.70003) (xy 47.784981 73.634537) (xy 47.737869 73.577131) (xy 47.680463 73.530019) (xy 47.61497 73.495012)
(xy 47.543905 73.473455) (xy 47.47 73.466176) (xy 46.92 73.466176) (xy 46.846095 73.473455) (xy 46.77503 73.495012)
(xy 46.709537 73.530019) (xy 46.652131 73.577131) (xy 46.605019 73.634537) (xy 46.570012 73.70003) (xy 46.548455 73.771095)
(xy 46.541176 73.845) (xy 46.541176 74.198214) (xy 46.51669 74.200626) (xy 46.41735 74.230761) (xy 46.325798 74.279696)
(xy 46.245552 74.345552) (xy 46.229045 74.365666) (xy 46.015662 74.579049) (xy 45.995553 74.595552) (xy 45.961447 74.637111)
(xy 45.929696 74.675799) (xy 45.880761 74.767351) (xy 45.850626 74.866691) (xy 45.840451 74.97) (xy 45.843001 74.995891)
(xy 45.843 84.094119) (xy 45.840451 84.12) (xy 45.843 84.14588) (xy 45.850626 84.223309) (xy 45.880761 84.322649)
(xy 45.929696 84.414202) (xy 45.995552 84.494448) (xy 46.015666 84.510955) (xy 47.363001 85.858292) (xy 47.363 88.000141)
(xy 47.33436 88.043004) (xy 47.287095 88.157111) (xy 47.263 88.278246) (xy 47.263 88.401754) (xy 47.287095 88.522889)
(xy 47.33436 88.636996) (xy 47.402977 88.739689) (xy 47.490311 88.827023) (xy 47.593004 88.89564) (xy 47.707111 88.942905)
(xy 47.828246 88.967) (xy 47.951754 88.967) (xy 48.072889 88.942905) (xy 48.186996 88.89564) (xy 48.289689 88.827023)
(xy 48.377023 88.739689) (xy 48.44564 88.636996) (xy 48.492905 88.522889) (xy 48.517 88.401754) (xy 48.517 88.278246)
(xy 48.492905 88.157111) (xy 48.44564 88.043004) (xy 48.417 88.000141) (xy 48.417 85.665881) (xy 48.419549 85.64)
(xy 48.409374 85.53669) (xy 48.39568 85.491547) (xy 48.379239 85.43735) (xy 48.330304 85.345798) (xy 48.264448 85.265552)
(xy 48.244344 85.249053) (xy 46.897 83.901711) (xy 46.897 83.628975) (xy 46.90925 83.63) (xy 47.068 83.47125)
(xy 47.068 82.247) (xy 47.048 82.247) (xy 47.048 81.993) (xy 47.068 81.993) (xy 47.068 80.76875)
(xy 46.90925 80.61) (xy 46.897 80.611025) (xy 46.897 75.971559) (xy 46.92 75.973824) (xy 47.47 75.973824)
(xy 47.543905 75.966545) (xy 47.61497 75.944988) (xy 47.680463 75.909981) (xy 47.737869 75.862869) (xy 47.784981 75.805463)
(xy 47.819988 75.73997) (xy 47.83 75.706964) (xy 47.840012 75.73997) (xy 47.875019 75.805463) (xy 47.922131 75.862869)
(xy 47.979537 75.909981) (xy 48.04503 75.944988) (xy 48.116095 75.966545) (xy 48.19 75.973824) (xy 48.74 75.973824)
(xy 48.813905 75.966545) (xy 48.88497 75.944988) (xy 48.950463 75.909981) (xy 49.007869 75.862869) (xy 49.054981 75.805463)
(xy 49.089988 75.73997) (xy 49.1 75.706964) (xy 49.110012 75.73997) (xy 49.145019 75.805463) (xy 49.192131 75.862869)
(xy 49.208 75.875893) (xy 49.208 76.30671) (xy 48.110662 77.404049) (xy 48.090553 77.420552) (xy 48.039698 77.482519)
(xy 48.024696 77.500799) (xy 47.975761 77.592351) (xy 47.945626 77.691691) (xy 47.935451 77.795) (xy 47.938001 77.820891)
(xy 47.938 80.814037) (xy 47.923214 80.795853) (xy 47.826881 80.716066) (xy 47.716834 80.656605) (xy 47.597301 80.619756)
(xy 47.48075 80.61) (xy 47.322 80.76875) (xy 47.322 81.993) (xy 47.342 81.993) (xy 47.342 82.247)
(xy 47.322 82.247) (xy 47.322 83.47125) (xy 47.48075 83.63) (xy 47.597301 83.620244) (xy 47.716834 83.583395)
(xy 47.826881 83.523934) (xy 47.923214 83.444147) (xy 47.943 83.419814) (xy 47.943 83.756119) (xy 47.940451 83.782)
(xy 47.943 83.80788) (xy 47.950626 83.885309) (xy 47.980761 83.984649) (xy 48.029696 84.076202) (xy 48.095552 84.156448)
(xy 48.115666 84.172955) (xy 48.293 84.35029) (xy 48.293 84.682121) (xy 48.290451 84.708002) (xy 48.293 84.733882)
(xy 48.300626 84.811311) (xy 48.330761 84.910651) (xy 48.379696 85.002204) (xy 48.445552 85.08245) (xy 48.465666 85.098957)
(xy 48.533001 85.166292) (xy 48.533 90.873) (xy 47.25 90.873) (xy 47.176451 90.880244) (xy 47.105728 90.901697)
(xy 47.04055 90.936536) (xy 47.014959 90.957539) (xy 45.123973 89.066553) (xy 45.196863 89.059374) (xy 45.296203 89.029239)
(xy 45.387755 88.980304) (xy 45.468001 88.914448) (xy 45.484508 88.894334) (xy 45.964338 88.414505) (xy 45.984447 88.398002)
(xy 46.050303 88.317756) (xy 46.099238 88.226204) (xy 46.129373 88.126864) (xy 46.136999 88.049435) (xy 46.139548 88.023554)
(xy 46.136999 87.997673) (xy 46.136999 84.900876) (xy 46.139548 84.874998) (xy 46.136563 84.844692) (xy 46.129373 84.771689)
(xy 46.099238 84.672349) (xy 46.050303 84.580797) (xy 45.984447 84.500551) (xy 45.964338 84.484048) (xy 40.342962 78.862673)
(xy 40.332905 78.812111) (xy 40.28564 78.698004) (xy 40.217023 78.595311) (xy 40.129689 78.507977) (xy 40.026996 78.43936)
(xy 39.912889 78.392095) (xy 39.791754 78.368) (xy 39.668246 78.368) (xy 39.547111 78.392095) (xy 39.433004 78.43936)
(xy 39.330311 78.507977) (xy 39.242977 78.595311) (xy 39.17436 78.698004) (xy 39.127095 78.812111) (xy 39.103 78.933246)
(xy 39.103 79.056754) (xy 39.127095 79.177889) (xy 39.17436 79.291996) (xy 39.242977 79.394689) (xy 39.330311 79.482023)
(xy 39.433004 79.55064) (xy 39.547111 79.597905) (xy 39.597673 79.607962) (xy 45.082999 85.093289) (xy 45.083 87.805263)
(xy 44.942886 87.945378) (xy 44.922889 87.937095) (xy 44.801754 87.913) (xy 44.678246 87.913) (xy 44.557111 87.937095)
(xy 44.443004 87.98436) (xy 44.340311 88.052977) (xy 44.252977 88.140311) (xy 44.230849 88.173429) (xy 40.927 84.86958)
(xy 40.927 84.533251) (xy 40.930275 84.5) (xy 40.927 84.466748) (xy 40.927 83.533252) (xy 40.930275 83.5)
(xy 40.917204 83.367285) (xy 40.878492 83.23967) (xy 40.815628 83.122059) (xy 40.731027 83.018973) (xy 40.627941 82.934372)
(xy 40.51033 82.871508) (xy 40.382715 82.832796) (xy 40.25 82.819725) (xy 40.216748 82.823) (xy 39.283252 82.823)
(xy 39.25 82.819725) (xy 39.117285 82.832796) (xy 38.98967 82.871508) (xy 38.872059 82.934372) (xy 38.768973 83.018973)
(xy 38.684372 83.122059) (xy 38.621508 83.23967) (xy 38.582796 83.367285) (xy 38.569725 83.5) (xy 38.573 83.533253)
(xy 38.573001 84.466738) (xy 38.569725 84.5) (xy 38.582796 84.632715) (xy 38.621508 84.76033) (xy 38.684372 84.877941)
(xy 38.768973 84.981027) (xy 38.872059 85.065628) (xy 38.98967 85.128492) (xy 39.117285 85.167204) (xy 39.216748 85.177)
(xy 39.25 85.180275) (xy 39.283252 85.177) (xy 39.572385 85.177) (xy 39.573 85.183247) (xy 39.573 85.183254)
(xy 39.582796 85.282717) (xy 39.621508 85.410332) (xy 39.639697 85.44436) (xy 39.684372 85.527942) (xy 39.747776 85.6052)
(xy 39.747779 85.605203) (xy 39.768974 85.631029) (xy 39.7948 85.652224) (xy 46.054709 91.912133) (xy 45.733421 92.233421)
(xy 45.713577 92.257601) (xy 45.654448 92.185552) (xy 45.634339 92.169049) (xy 38.257 84.791711) (xy 38.257 77.240812)
(xy 38.313246 77.252) (xy 38.436754 77.252) (xy 38.557889 77.227905) (xy 38.671996 77.18064) (xy 38.774689 77.112023)
(xy 38.859712 77.027) (xy 40.160141 77.027) (xy 40.203004 77.05564) (xy 40.317111 77.102905) (xy 40.438246 77.127)
(xy 40.561754 77.127) (xy 40.682889 77.102905) (xy 40.796996 77.05564) (xy 40.899689 76.987023) (xy 40.987023 76.899689)
(xy 41.05564 76.796996) (xy 41.102905 76.682889) (xy 41.127 76.561754) (xy 41.127 76.438246) (xy 41.118618 76.396105)
(xy 41.163955 76.426398) (xy 41.448667 76.544329) (xy 41.750915 76.60445) (xy 42.059085 76.60445) (xy 42.361333 76.544329)
(xy 42.646045 76.426398) (xy 42.902279 76.255188) (xy 43.120188 76.037279) (xy 43.291398 75.781045) (xy 43.409329 75.496333)
(xy 43.46945 75.194085) (xy 43.46945 74.885915) (xy 43.409329 74.583667) (xy 43.291398 74.298955) (xy 43.154594 74.094213)
(xy 43.253941 74.19356) (xy 43.396811 74.289023) (xy 43.555559 74.354778) (xy 43.724086 74.3883) (xy 43.895914 74.3883)
(xy 44.064441 74.354778) (xy 44.223189 74.289023) (xy 44.366059 74.19356) (xy 44.48756 74.072059) (xy 44.583023 73.929189)
(xy 44.648778 73.770441) (xy 44.6823 73.601914) (xy 44.6823 73.430086) (xy 44.648778 73.261559) (xy 44.583023 73.102811)
(xy 44.48756 72.959941) (xy 44.366059 72.83844) (xy 44.223189 72.742977) (xy 44.064441 72.677222) (xy 43.895914 72.6437)
(xy 43.724086 72.6437) (xy 43.555559 72.677222) (xy 43.396811 72.742977) (xy 43.253941 72.83844) (xy 43.13244 72.959941)
(xy 43.036977 73.102811) (xy 42.971222 73.261559) (xy 42.9377 73.430086) (xy 42.9377 73.601914) (xy 42.971222 73.770441)
(xy 43.036977 73.929189) (xy 43.098034 74.020567) (xy 42.902279 73.824812) (xy 42.646045 73.653602) (xy 42.361333 73.535671)
(xy 42.059085 73.47555) (xy 41.750915 73.47555) (xy 41.448667 73.535671) (xy 41.163955 73.653602) (xy 40.907721 73.824812)
(xy 40.689812 74.042721) (xy 40.518602 74.298955) (xy 40.400671 74.583667) (xy 40.34055 74.885915) (xy 40.34055 75.194085)
(xy 40.400671 75.496333) (xy 40.518602 75.781045) (xy 40.582848 75.877196) (xy 40.561754 75.873) (xy 40.438246 75.873)
(xy 40.317111 75.897095) (xy 40.203004 75.94436) (xy 40.160141 75.973) (xy 38.525881 75.973) (xy 38.5 75.970451)
(xy 38.474119 75.973) (xy 38.39669 75.980626) (xy 38.339417 75.998) (xy 38.313246 75.998) (xy 38.257 76.009188)
(xy 38.257 71.279859) (xy 38.28564 71.236996) (xy 38.332905 71.122889) (xy 38.357 71.001754) (xy 38.357 70.878246)
(xy 38.344683 70.816324) (xy 38.75625 70.816324) (xy 38.872831 70.804842) (xy 38.984932 70.770836) (xy 39.088244 70.715615)
(xy 39.178799 70.641299) (xy 39.253115 70.550744) (xy 39.308336 70.447432) (xy 39.342342 70.335331) (xy 39.353824 70.21875)
(xy 39.353824 69.805915) (xy 40.34055 69.805915) (xy 40.34055 70.114085) (xy 40.400671 70.416333) (xy 40.518602 70.701045)
(xy 40.689812 70.957279) (xy 40.907721 71.175188) (xy 41.163955 71.346398) (xy 41.448667 71.464329) (xy 41.750915 71.52445)
(xy 42.059085 71.52445) (xy 42.361333 71.464329) (xy 42.646045 71.346398) (xy 42.902279 71.175188) (xy 43.098034 70.979433)
(xy 43.036977 71.070811) (xy 42.971222 71.229559) (xy 42.9377 71.398086) (xy 42.9377 71.569914) (xy 42.971222 71.738441)
(xy 43.036977 71.897189) (xy 43.13244 72.040059) (xy 43.253941 72.16156) (xy 43.396811 72.257023) (xy 43.555559 72.322778)
(xy 43.724086 72.3563) (xy 43.895914 72.3563) (xy 44.064441 72.322778) (xy 44.223189 72.257023) (xy 44.366059 72.16156)
(xy 44.48756 72.040059) (xy 44.583023 71.897189) (xy 44.648778 71.738441) (xy 44.6823 71.569914) (xy 44.6823 71.398086)
(xy 44.648778 71.229559) (xy 44.583023 71.070811) (xy 44.48756 70.927941) (xy 44.366059 70.80644) (xy 44.223189 70.710977)
(xy 44.064441 70.645222) (xy 43.895914 70.6117) (xy 43.724086 70.6117) (xy 43.555559 70.645222) (xy 43.396811 70.710977)
(xy 43.253941 70.80644) (xy 43.154594 70.905787) (xy 43.291398 70.701045) (xy 43.409329 70.416333) (xy 43.46945 70.114085)
(xy 43.46945 69.805915) (xy 43.409329 69.503667) (xy 43.291398 69.218955) (xy 43.120188 68.962721) (xy 42.902279 68.744812)
(xy 42.646045 68.573602) (xy 42.361333 68.455671) (xy 42.059085 68.39555) (xy 41.750915 68.39555) (xy 41.448667 68.455671)
(xy 41.163955 68.573602) (xy 40.907721 68.744812) (xy 40.689812 68.962721) (xy 40.518602 69.218955) (xy 40.400671 69.503667)
(xy 40.34055 69.805915) (xy 39.353824 69.805915) (xy 39.353824 69.78125) (xy 39.342342 69.664669) (xy 39.308336 69.552568)
(xy 39.253115 69.449256) (xy 39.178799 69.358701) (xy 39.088244 69.284385) (xy 38.984932 69.229164) (xy 38.929999 69.2125)
(xy 38.984932 69.195836) (xy 39.088244 69.140615) (xy 39.178799 69.066299) (xy 39.253115 68.975744) (xy 39.308336 68.872432)
(xy 39.342342 68.760331) (xy 39.353824 68.64375) (xy 39.353824 68.20625) (xy 39.342342 68.089669) (xy 39.308336 67.977568)
(xy 39.253115 67.874256) (xy 39.178799 67.783701) (xy 39.088244 67.709385) (xy 38.984932 67.654164) (xy 38.872831 67.620158)
(xy 38.75625 67.608676) (xy 38.24375 67.608676) (xy 38.127169 67.620158) (xy 38.015068 67.654164) (xy 38.004893 67.659603)
(xy 37.840955 67.495666) (xy 37.824448 67.475552) (xy 37.744202 67.409696) (xy 37.65265 67.360761) (xy 37.55331 67.330626)
(xy 37.475881 67.323) (xy 37.45 67.320451) (xy 37.424119 67.323) (xy 34.103713 67.323) (xy 33.992889 67.277095)
(xy 33.871754 67.253) (xy 33.748246 67.253) (xy 33.627111 67.277095) (xy 33.513004 67.32436) (xy 33.410311 67.392977)
(xy 33.322977 67.480311) (xy 33.25436 67.583004) (xy 33.207095 67.697111) (xy 33.197038 67.747673) (xy 33.184211 67.7605)
(xy 32.765806 67.7605) (xy 32.753115 67.736756) (xy 32.678799 67.646201) (xy 32.588244 67.571885) (xy 32.484932 67.516664)
(xy 32.429999 67.5) (xy 32.484932 67.483336) (xy 32.588244 67.428115) (xy 32.678799 67.353799) (xy 32.753115 67.263244)
(xy 32.808336 67.159932) (xy 32.842342 67.047831) (xy 32.853824 66.93125) (xy 32.853824 66.498246) (xy 39.103 66.498246)
(xy 39.103 66.621754) (xy 39.127095 66.742889) (xy 39.17436 66.856996) (xy 39.242977 66.959689) (xy 39.330311 67.047023)
(xy 39.433004 67.11564) (xy 39.547111 67.162905) (xy 39.641806 67.181741) (xy 40.297607 67.837543) (xy 40.313316 67.856684)
(xy 40.332456 67.872392) (xy 40.332464 67.8724) (xy 40.389754 67.919417) (xy 40.428265 67.940001) (xy 40.476964 67.966031)
(xy 40.571591 67.994736) (xy 40.645347 68.002) (xy 40.645357 68.002) (xy 40.67 68.004427) (xy 40.694643 68.002)
(xy 43.092726 68.002) (xy 43.173004 68.05564) (xy 43.287111 68.102905) (xy 43.408246 68.127) (xy 43.531754 68.127)
(xy 43.652889 68.102905) (xy 43.766996 68.05564) (xy 43.869689 67.987023) (xy 43.957023 67.899689) (xy 44.02564 67.796996)
(xy 44.072905 67.682889) (xy 44.097 67.561754) (xy 44.097 67.438246) (xy 44.072905 67.317111) (xy 44.02564 67.203004)
(xy 43.957023 67.100311) (xy 43.869689 67.012977) (xy 43.766996 66.94436) (xy 43.652889 66.897095) (xy 43.531754 66.873)
(xy 43.408246 66.873) (xy 43.287111 66.897095) (xy 43.173004 66.94436) (xy 43.092726 66.998) (xy 40.877936 66.998)
(xy 40.351741 66.471806) (xy 40.332905 66.377111) (xy 40.28564 66.263004) (xy 40.217023 66.160311) (xy 40.129689 66.072977)
(xy 40.026996 66.00436) (xy 39.912889 65.957095) (xy 39.791754 65.933) (xy 39.668246 65.933) (xy 39.547111 65.957095)
(xy 39.433004 66.00436) (xy 39.330311 66.072977) (xy 39.242977 66.160311) (xy 39.17436 66.263004) (xy 39.127095 66.377111)
(xy 39.103 66.498246) (xy 32.853824 66.498246) (xy 32.853824 66.49375) (xy 32.842342 66.377169) (xy 32.808336 66.265068)
(xy 32.753115 66.161756) (xy 32.678799 66.071201) (xy 32.62494 66.027) (xy 33.910141 66.027) (xy 33.953004 66.05564)
(xy 34.067111 66.102905) (xy 34.188246 66.127) (xy 34.311754 66.127) (xy 34.432889 66.102905) (xy 34.546996 66.05564)
(xy 34.649689 65.987023) (xy 34.737023 65.899689) (xy 34.80564 65.796996) (xy 34.852905 65.682889) (xy 34.877 65.561754)
(xy 34.877 65.438246) (xy 34.852905 65.317111) (xy 34.80564 65.203004) (xy 34.737023 65.100311) (xy 34.649689 65.012977)
(xy 34.546996 64.94436) (xy 34.432889 64.897095) (xy 34.311754 64.873) (xy 34.188246 64.873) (xy 34.067111 64.897095)
(xy 33.953004 64.94436) (xy 33.910141 64.973) (xy 32.339859 64.973) (xy 32.296996 64.94436) (xy 32.182889 64.897095)
(xy 32.061754 64.873) (xy 31.938246 64.873) (xy 31.817111 64.897095) (xy 31.703004 64.94436) (xy 31.600311 65.012977)
(xy 31.512977 65.100311) (xy 31.44436 65.203004) (xy 31.397095 65.317111) (xy 31.373 65.438246) (xy 31.373 65.561754)
(xy 31.397095 65.682889) (xy 31.44436 65.796996) (xy 31.473 65.839859) (xy 31.473 65.964149) (xy 31.411756 65.996885)
(xy 31.321201 66.071201) (xy 31.246885 66.161756) (xy 31.191664 66.265068) (xy 31.157658 66.377169) (xy 31.146176 66.49375)
(xy 21.527 66.49375) (xy 21.527 65.907876) (xy 21.529549 65.881995) (xy 21.519374 65.778686) (xy 21.489239 65.679346)
(xy 21.440304 65.587794) (xy 21.374448 65.507548) (xy 21.354339 65.491045) (xy 19.897 64.033707) (xy 19.897 61.818975)
(xy 19.905157 61.859983) (xy 19.987851 62.059624) (xy 20.107904 62.239297) (xy 20.260703 62.392096) (xy 20.440376 62.512149)
(xy 20.640017 62.594843) (xy 20.851955 62.637) (xy 21.068045 62.637) (xy 21.279983 62.594843) (xy 21.479624 62.512149)
(xy 21.659297 62.392096) (xy 21.812096 62.239297) (xy 21.927221 62.067) (xy 47.174119 62.067) (xy 47.2 62.069549)
(xy 47.225881 62.067) (xy 47.30331 62.059374) (xy 47.40265 62.029239) (xy 47.494202 61.980304) (xy 47.574448 61.914448)
(xy 47.590955 61.894334) (xy 48.606138 60.879151) (xy 51.113 60.879151) (xy 51.113 61.120849) (xy 51.160153 61.357903)
(xy 51.252647 61.581202) (xy 51.386927 61.782167) (xy 51.557833 61.953073) (xy 51.758798 62.087353) (xy 51.982097 62.179847)
(xy 52.219151 62.227) (xy 52.460849 62.227) (xy 52.697903 62.179847) (xy 52.752105 62.157396) (xy 53.033 62.438291)
(xy 53.033 62.527348) (xy 52.921202 62.452647) (xy 52.697903 62.360153) (xy 52.460849 62.313) (xy 52.219151 62.313)
(xy 51.982097 62.360153) (xy 51.758798 62.452647) (xy 51.557833 62.586927) (xy 51.386927 62.757833) (xy 51.252647 62.958798)
(xy 51.160153 63.182097) (xy 51.113 63.419151) (xy 51.113 63.660849) (xy 51.160153 63.897903) (xy 51.252647 64.121202)
(xy 51.386927 64.322167) (xy 51.557833 64.493073) (xy 51.758798 64.627353) (xy 51.982097 64.719847) (xy 52.219151 64.767)
(xy 52.460849 64.767) (xy 52.697903 64.719847) (xy 52.921202 64.627353) (xy 53.033001 64.552652) (xy 53.033001 64.724109)
(xy 53.030451 64.75) (xy 53.040626 64.853309) (xy 53.070761 64.952649) (xy 53.117451 65.04) (xy 53.119697 65.044202)
(xy 53.185553 65.124448) (xy 53.205662 65.140951) (xy 57.947038 69.882329) (xy 57.957095 69.932889) (xy 58.00436 70.046996)
(xy 58.072977 70.149689) (xy 58.160311 70.237023) (xy 58.263004 70.30564) (xy 58.377111 70.352905) (xy 58.498246 70.377)
(xy 58.621754 70.377) (xy 58.742889 70.352905) (xy 58.856996 70.30564) (xy 58.959689 70.237023) (xy 59.047023 70.149689)
(xy 59.11564 70.046996) (xy 59.162905 69.932889) (xy 59.187 69.811754) (xy 59.187 69.688246) (xy 59.162905 69.567111)
(xy 59.11564 69.453004) (xy 59.047023 69.350311) (xy 58.959689 69.262977) (xy 58.856996 69.19436) (xy 58.742889 69.147095)
(xy 58.692329 69.137038) (xy 54.087 64.531711) (xy 54.087 64.48224) (xy 54.097833 64.493073) (xy 54.298798 64.627353)
(xy 54.522097 64.719847) (xy 54.759151 64.767) (xy 55.000849 64.767) (xy 55.237903 64.719847) (xy 55.461202 64.627353)
(xy 55.603001 64.532606) (xy 55.603001 65.014109) (xy 55.600451 65.04) (xy 55.610626 65.143309) (xy 55.640761 65.242649)
(xy 55.684484 65.324449) (xy 55.689697 65.334202) (xy 55.755553 65.414448) (xy 55.775662 65.430951) (xy 58.667038 68.322329)
(xy 58.677095 68.372889) (xy 58.72436 68.486996) (xy 58.792977 68.589689) (xy 58.880311 68.677023) (xy 58.983004 68.74564)
(xy 59.097111 68.792905) (xy 59.218246 68.817) (xy 59.341754 68.817) (xy 59.462889 68.792905) (xy 59.576996 68.74564)
(xy 59.679689 68.677023) (xy 59.767023 68.589689) (xy 59.83564 68.486996) (xy 59.882905 68.372889) (xy 59.907 68.251754)
(xy 59.907 68.128246) (xy 59.882905 68.007111) (xy 59.83564 67.893004) (xy 59.767023 67.790311) (xy 59.679689 67.702977)
(xy 59.576996 67.63436) (xy 59.462889 67.587095) (xy 59.412329 67.577038) (xy 56.657 64.821711) (xy 56.657 64.50588)
(xy 56.838798 64.627353) (xy 57.062097 64.719847) (xy 57.299151 64.767) (xy 57.540849 64.767) (xy 57.777903 64.719847)
(xy 58.001202 64.627353) (xy 58.202167 64.493073) (xy 58.373073 64.322167) (xy 58.507353 64.121202) (xy 58.599847 63.897903)
(xy 58.647 63.660849) (xy 58.647 63.419151) (xy 58.599847 63.182097) (xy 58.507353 62.958798) (xy 58.373073 62.757833)
(xy 58.202167 62.586927) (xy 58.001202 62.452647) (xy 57.777903 62.360153) (xy 57.540849 62.313) (xy 57.299151 62.313)
(xy 57.062097 62.360153) (xy 56.838798 62.452647) (xy 56.657 62.57412) (xy 56.657 62.275881) (xy 56.659549 62.25)
(xy 56.649374 62.14669) (xy 56.622962 62.059624) (xy 56.619239 62.04735) (xy 56.570304 61.955798) (xy 56.504448 61.875552)
(xy 56.484339 61.859049) (xy 56.037395 61.412106) (xy 56.059847 61.357903) (xy 56.107 61.120849) (xy 56.107 60.879151)
(xy 56.059847 60.642097) (xy 55.967353 60.418798) (xy 55.833073 60.217833) (xy 55.662167 60.046927) (xy 55.461202 59.912647)
(xy 55.237903 59.820153) (xy 55.000849 59.773) (xy 54.759151 59.773) (xy 54.522097 59.820153) (xy 54.298798 59.912647)
(xy 54.097833 60.046927) (xy 53.926927 60.217833) (xy 53.792647 60.418798) (xy 53.700153 60.642097) (xy 53.653 60.879151)
(xy 53.653 61.120849) (xy 53.700153 61.357903) (xy 53.792647 61.581202) (xy 53.926927 61.782167) (xy 54.097833 61.953073)
(xy 54.298798 62.087353) (xy 54.522097 62.179847) (xy 54.759151 62.227) (xy 55.000849 62.227) (xy 55.237903 62.179847)
(xy 55.292106 62.157395) (xy 55.603 62.46829) (xy 55.603 62.547393) (xy 55.461202 62.452647) (xy 55.237903 62.360153)
(xy 55.000849 62.313) (xy 54.759151 62.313) (xy 54.522097 62.360153) (xy 54.298798 62.452647) (xy 54.097833 62.586927)
(xy 54.087 62.59776) (xy 54.087 62.245881) (xy 54.089549 62.22) (xy 54.079374 62.11669) (xy 54.049239 62.01735)
(xy 54.000304 61.925798) (xy 53.934448 61.845552) (xy 53.914344 61.829053) (xy 53.497396 61.412105) (xy 53.519847 61.357903)
(xy 53.567 61.120849) (xy 53.567 60.879151) (xy 53.519847 60.642097) (xy 53.427353 60.418798) (xy 53.293073 60.217833)
(xy 53.122167 60.046927) (xy 52.921202 59.912647) (xy 52.697903 59.820153) (xy 52.460849 59.773) (xy 52.219151 59.773)
(xy 51.982097 59.820153) (xy 51.758798 59.912647) (xy 51.557833 60.046927) (xy 51.386927 60.217833) (xy 51.252647 60.418798)
(xy 51.160153 60.642097) (xy 51.113 60.879151) (xy 48.606138 60.879151) (xy 49.76829 59.717) (xy 55.391711 59.717)
(xy 56.262604 60.587895) (xy 56.240153 60.642097) (xy 56.193 60.879151) (xy 56.193 61.120849) (xy 56.240153 61.357903)
(xy 56.332647 61.581202) (xy 56.466927 61.782167) (xy 56.637833 61.953073) (xy 56.838798 62.087353) (xy 57.062097 62.179847)
(xy 57.299151 62.227) (xy 57.540849 62.227) (xy 57.777903 62.179847) (xy 58.001202 62.087353) (xy 58.202167 61.953073)
(xy 58.373073 61.782167) (xy 58.507353 61.581202) (xy 58.599847 61.357903) (xy 58.647 61.120849) (xy 58.647 60.879151)
(xy 58.599847 60.642097) (xy 58.507353 60.418798) (xy 58.373073 60.217833) (xy 58.202167 60.046927) (xy 58.001202 59.912647)
(xy 57.777903 59.820153) (xy 57.540849 59.773) (xy 57.299151 59.773) (xy 57.062097 59.820153) (xy 57.007895 59.842604)
(xy 56.000955 58.835666) (xy 55.984448 58.815552) (xy 55.904202 58.749696) (xy 55.81265 58.700761) (xy 55.71331 58.670626)
(xy 55.635881 58.663) (xy 55.61 58.660451) (xy 55.584119 58.663) (xy 49.575881 58.663) (xy 49.55 58.660451)
(xy 49.524119 58.663) (xy 49.44669 58.670626) (xy 49.34735 58.700761) (xy 49.255798 58.749696) (xy 49.175552 58.815552)
(xy 49.159049 58.835661) (xy 46.981711 61.013) (xy 21.927221 61.013) (xy 21.812096 60.840703) (xy 21.659297 60.687904)
(xy 21.479624 60.567851) (xy 21.279983 60.485157) (xy 21.068045 60.443) (xy 20.851955 60.443) (xy 20.665127 60.480162)
(xy 22.440162 58.705127) (xy 22.403 58.891955) (xy 22.403 59.108045) (xy 22.445157 59.319983) (xy 22.527851 59.519624)
(xy 22.647904 59.699297) (xy 22.800703 59.852096) (xy 22.980376 59.972149) (xy 23.180017 60.054843) (xy 23.391955 60.097)
(xy 23.608045 60.097) (xy 23.819983 60.054843) (xy 24.019624 59.972149) (xy 24.199297 59.852096) (xy 24.352096 59.699297)
(xy 24.467221 59.527) (xy 26.281711 59.527) (xy 27.33905 60.58434) (xy 27.355553 60.604449) (xy 27.435799 60.670305)
(xy 27.527351 60.71924) (xy 27.626691 60.749375) (xy 27.73 60.75955) (xy 27.755881 60.757001) (xy 46.604118 60.757001)
(xy 46.629999 60.75955) (xy 46.65588 60.757001) (xy 46.733309 60.749375) (xy 46.832649 60.71924) (xy 46.924201 60.670305)
(xy 47.004447 60.604449) (xy 47.020954 60.584335) (xy 48.998291 58.607) (xy 56.821711 58.607) (xy 58.802604 60.587895)
(xy 58.780153 60.642097) (xy 58.733 60.879151) (xy 58.733 61.120849) (xy 58.780153 61.357903) (xy 58.872647 61.581202)
(xy 59.006927 61.782167) (xy 59.177833 61.953073) (xy 59.378798 62.087353) (xy 59.602097 62.179847) (xy 59.839151 62.227)
(xy 60.080849 62.227) (xy 60.317903 62.179847) (xy 60.372105 62.157396) (xy 60.772999 62.55829) (xy 60.772999 62.617759)
(xy 60.742167 62.586927) (xy 60.541202 62.452647) (xy 60.317903 62.360153) (xy 60.080849 62.313) (xy 59.839151 62.313)
(xy 59.602097 62.360153) (xy 59.378798 62.452647) (xy 59.177833 62.586927) (xy 59.006927 62.757833) (xy 58.872647 62.958798)
(xy 58.780153 63.182097) (xy 58.733 63.419151) (xy 58.733 63.660849) (xy 58.780153 63.897903) (xy 58.872647 64.121202)
(xy 59.006927 64.322167) (xy 59.177833 64.493073) (xy 59.378798 64.627353) (xy 59.602097 64.719847) (xy 59.839151 64.767)
(xy 60.080849 64.767) (xy 60.317903 64.719847) (xy 60.541202 64.627353) (xy 60.742167 64.493073) (xy 60.773 64.46224)
(xy 60.773 64.671697) (xy 60.767921 64.677886) (xy 60.714343 64.778125) (xy 60.68135 64.886889) (xy 60.673 64.971665)
(xy 60.673001 70.010972) (xy 56.927 73.756973) (xy 56.927 70.675877) (xy 56.929549 70.649999) (xy 56.927 70.624119)
(xy 56.919374 70.54669) (xy 56.889239 70.44735) (xy 56.840304 70.355798) (xy 56.774448 70.275552) (xy 56.754339 70.259049)
(xy 53.822962 67.327673) (xy 53.812905 67.277111) (xy 53.76564 67.163004) (xy 53.697023 67.060311) (xy 53.609689 66.972977)
(xy 53.506996 66.90436) (xy 53.392889 66.857095) (xy 53.271754 66.833) (xy 53.148246 66.833) (xy 53.027111 66.857095)
(xy 52.913004 66.90436) (xy 52.810311 66.972977) (xy 52.722977 67.060311) (xy 52.65436 67.163004) (xy 52.607095 67.277111)
(xy 52.583 67.398246) (xy 52.583 67.521754) (xy 52.607095 67.642889) (xy 52.65436 67.756996) (xy 52.722977 67.859689)
(xy 52.810311 67.947023) (xy 52.913004 68.01564) (xy 53.027111 68.062905) (xy 53.077673 68.072962) (xy 55.873 70.86829)
(xy 55.873001 81.994109) (xy 55.870451 82.02) (xy 55.880626 82.123309) (xy 55.910761 82.222649) (xy 55.959696 82.314201)
(xy 55.962343 82.317426) (xy 56.025553 82.394448) (xy 56.045661 82.410951) (xy 56.947038 83.312329) (xy 56.957095 83.362889)
(xy 57.00436 83.476996) (xy 57.072977 83.579689) (xy 57.160311 83.667023) (xy 57.263004 83.73564) (xy 57.377111 83.782905)
(xy 57.498246 83.807) (xy 57.621754 83.807) (xy 57.742889 83.782905) (xy 57.856996 83.73564) (xy 57.959689 83.667023)
(xy 58.047023 83.579689) (xy 58.11564 83.476996) (xy 58.162905 83.362889) (xy 58.187 83.241754) (xy 58.187 83.118246)
(xy 58.162905 82.997111) (xy 58.11564 82.883004) (xy 58.047023 82.780311) (xy 57.959689 82.692977) (xy 57.856996 82.62436)
(xy 57.742889 82.577095) (xy 57.692329 82.567038) (xy 56.927 81.801711) (xy 56.927 81.643712) (xy 56.970311 81.687023)
(xy 57.073004 81.75564) (xy 57.187111 81.802905) (xy 57.308246 81.827) (xy 57.431754 81.827) (xy 57.552889 81.802905)
(xy 57.666996 81.75564) (xy 57.769689 81.687023) (xy 57.857023 81.599689) (xy 57.92564 81.496996) (xy 57.972905 81.382889)
(xy 57.982962 81.332327) (xy 60.714345 78.600946) (xy 60.734448 78.584448) (xy 60.800304 78.504202) (xy 60.849239 78.41265)
(xy 60.879374 78.31331) (xy 60.887 78.235881) (xy 60.887 78.23588) (xy 60.889549 78.21) (xy 60.887 78.184119)
(xy 60.887 76.578289) (xy 62.15829 75.307) (xy 63.650288 75.307) (xy 63.650311 75.307023) (xy 63.753004 75.37564)
(xy 63.867111 75.422905) (xy 63.988246 75.447) (xy 64.111754 75.447) (xy 64.232889 75.422905) (xy 64.346996 75.37564)
(xy 64.449689 75.307023) (xy 64.537023 75.219689) (xy 64.60564 75.116996) (xy 64.652905 75.002889) (xy 64.677 74.881754)
(xy 64.677 74.758246) (xy 64.652905 74.637111) (xy 64.60564 74.523004) (xy 64.537023 74.420311) (xy 64.449689 74.332977)
(xy 64.346996 74.26436) (xy 64.232889 74.217095) (xy 64.111754 74.193) (xy 63.988246 74.193) (xy 63.867111 74.217095)
(xy 63.780429 74.253) (xy 61.965877 74.253) (xy 61.939999 74.250451) (xy 61.914121 74.253) (xy 61.914119 74.253)
(xy 61.83669 74.260626) (xy 61.73735 74.290761) (xy 61.645798 74.339696) (xy 61.565552 74.405552) (xy 61.549049 74.425661)
(xy 60.005662 75.969049) (xy 59.985553 75.985552) (xy 59.934837 76.04735) (xy 59.919696 76.065799) (xy 59.870761 76.157351)
(xy 59.840626 76.256691) (xy 59.830451 76.36) (xy 59.833001 76.38589) (xy 59.833 77.991709) (xy 59.387 78.437709)
(xy 59.387 74.098289) (xy 60.335289 73.15) (xy 65.271176 73.15) (xy 65.271176 74.85) (xy 65.278455 74.923905)
(xy 65.300012 74.99497) (xy 65.335019 75.060463) (xy 65.382131 75.117869) (xy 65.439537 75.164981) (xy 65.50503 75.199988)
(xy 65.576095 75.221545) (xy 65.65 75.228824) (xy 67.35 75.228824) (xy 67.423905 75.221545) (xy 67.49497 75.199988)
(xy 67.560463 75.164981) (xy 67.617869 75.117869) (xy 67.664981 75.060463) (xy 67.699988 74.99497) (xy 67.721545 74.923905)
(xy 67.728824 74.85) (xy 67.728824 73.15) (xy 67.721545 73.076095) (xy 67.699988 73.00503) (xy 67.664981 72.939537)
(xy 67.617869 72.882131) (xy 67.560463 72.835019) (xy 67.49497 72.800012) (xy 67.423905 72.778455) (xy 67.35 72.771176)
(xy 65.65 72.771176) (xy 65.576095 72.778455) (xy 65.50503 72.800012) (xy 65.439537 72.835019) (xy 65.382131 72.882131)
(xy 65.335019 72.939537) (xy 65.300012 73.00503) (xy 65.278455 73.076095) (xy 65.271176 73.15) (xy 60.335289 73.15)
(xy 60.472328 73.012962) (xy 60.522889 73.002905) (xy 60.636996 72.95564) (xy 60.739689 72.887023) (xy 60.827023 72.799689)
(xy 60.89564 72.696996) (xy 60.942905 72.582889) (xy 60.967 72.461754) (xy 60.967 72.338246) (xy 60.942905 72.217111)
(xy 60.89564 72.103004) (xy 60.827023 72.000311) (xy 60.739689 71.912977) (xy 60.636996 71.84436) (xy 60.522889 71.797095)
(xy 60.519545 71.79643) (xy 60.976824 71.339151) (xy 65.273 71.339151) (xy 65.273 71.580849) (xy 65.320153 71.817903)
(xy 65.412647 72.041202) (xy 65.546927 72.242167) (xy 65.717833 72.413073) (xy 65.918798 72.547353) (xy 66.142097 72.639847)
(xy 66.379151 72.687) (xy 66.620849 72.687) (xy 66.857903 72.639847) (xy 67.081202 72.547353) (xy 67.282167 72.413073)
(xy 67.453073 72.242167) (xy 67.587353 72.041202) (xy 67.679847 71.817903) (xy 67.727 71.580849) (xy 67.727 71.339151)
(xy 67.679847 71.102097) (xy 67.587353 70.878798) (xy 67.453073 70.677833) (xy 67.282167 70.506927) (xy 67.081202 70.372647)
(xy 66.857903 70.280153) (xy 66.620849 70.233) (xy 66.379151 70.233) (xy 66.142097 70.280153) (xy 65.918798 70.372647)
(xy 65.717833 70.506927) (xy 65.546927 70.677833) (xy 65.412647 70.878798) (xy 65.320153 71.102097) (xy 65.273 71.339151)
(xy 60.976824 71.339151) (xy 61.637962 70.678013) (xy 61.659974 70.659948) (xy 61.732079 70.572089) (xy 61.785657 70.47185)
(xy 61.81865 70.363086) (xy 61.827 70.27831) (xy 61.827 70.278304) (xy 61.82979 70.249975) (xy 61.827 70.221646)
(xy 61.827 64.97587) (xy 61.829548 64.950002) (xy 61.826999 64.924124) (xy 61.826999 64.864275) (xy 61.992883 64.943371)
(xy 62.276411 65.015339) (xy 62.568531 65.030611) (xy 62.858019 64.988599) (xy 63.133747 64.890919) (xy 63.271157 64.817472)
(xy 63.348792 64.568397) (xy 62.5 63.719605) (xy 62.485858 63.733748) (xy 62.306253 63.554143) (xy 62.320395 63.54)
(xy 62.679605 63.54) (xy 63.528397 64.388792) (xy 63.777472 64.311157) (xy 63.903371 64.047117) (xy 63.975339 63.763589)
(xy 63.990611 63.471469) (xy 63.948599 63.181981) (xy 63.850919 62.906253) (xy 63.777472 62.768843) (xy 63.528397 62.691208)
(xy 62.679605 63.54) (xy 62.320395 63.54) (xy 62.306253 63.525858) (xy 62.485858 63.346253) (xy 62.5 63.360395)
(xy 63.348792 62.511603) (xy 63.341443 62.488025) (xy 63.35 62.488072) (xy 63.474482 62.475812) (xy 63.59418 62.439502)
(xy 63.704494 62.380537) (xy 63.801185 62.301185) (xy 63.880537 62.204494) (xy 63.939502 62.09418) (xy 63.975812 61.974482)
(xy 63.988072 61.85) (xy 63.985 61.28575) (xy 63.82625 61.127) (xy 62.627 61.127) (xy 62.627 61.147)
(xy 62.373 61.147) (xy 62.373 61.127) (xy 62.353 61.127) (xy 62.353 60.873) (xy 62.373 60.873)
(xy 62.373 59.67375) (xy 62.627 59.67375) (xy 62.627 60.873) (xy 63.82625 60.873) (xy 63.985 60.71425)
(xy 63.988072 60.15) (xy 63.975812 60.025518) (xy 63.939502 59.90582) (xy 63.880537 59.795506) (xy 63.801185 59.698815)
(xy 63.704494 59.619463) (xy 63.59418 59.560498) (xy 63.474482 59.524188) (xy 63.35 59.511928) (xy 62.78575 59.515)
(xy 62.627 59.67375) (xy 62.373 59.67375) (xy 62.21425 59.515) (xy 61.65 59.511928) (xy 61.525518 59.524188)
(xy 61.40582 59.560498) (xy 61.295506 59.619463) (xy 61.198815 59.698815) (xy 61.119463 59.795506) (xy 61.060498 59.90582)
(xy 61.024188 60.025518) (xy 61.011928 60.15) (xy 61.013112 60.367553) (xy 60.913073 60.217833) (xy 60.742167 60.046927)
(xy 60.541202 59.912647) (xy 60.317903 59.820153) (xy 60.080849 59.773) (xy 59.839151 59.773) (xy 59.602097 59.820153)
(xy 59.547895 59.842604) (xy 57.430955 57.725666) (xy 57.414448 57.705552) (xy 57.334202 57.639696) (xy 57.24265 57.590761)
(xy 57.14331 57.560626) (xy 57.065881 57.553) (xy 57.04 57.550451) (xy 57.014119 57.553) (xy 48.805881 57.553)
(xy 48.78 57.550451) (xy 48.754119 57.553) (xy 48.67669 57.560626) (xy 48.57735 57.590761) (xy 48.485798 57.639696)
(xy 48.405552 57.705552) (xy 48.389054 57.725656) (xy 46.41171 59.703001) (xy 27.948291 59.703001) (xy 26.890955 58.645666)
(xy 26.874448 58.625552) (xy 26.794202 58.559696) (xy 26.70265 58.510761) (xy 26.60331 58.480626) (xy 26.525881 58.473)
(xy 26.5 58.470451) (xy 26.474119 58.473) (xy 24.467221 58.473) (xy 24.352096 58.300703) (xy 24.199297 58.147904)
(xy 24.019624 58.027851) (xy 23.819983 57.945157) (xy 23.608045 57.903) (xy 23.391955 57.903) (xy 23.205127 57.940162)
(xy 24.61829 56.527) (xy 27.160141 56.527) (xy 27.203004 56.55564) (xy 27.317111 56.602905) (xy 27.438246 56.627)
(xy 27.561754 56.627) (xy 27.682889 56.602905) (xy 27.796996 56.55564) (xy 27.899689 56.487023) (xy 27.987023 56.399689)
(xy 28.05564 56.296996) (xy 28.102905 56.182889) (xy 28.127 56.061754) (xy 28.127 55.938246) (xy 28.102905 55.817111)
(xy 28.05564 55.703004) (xy 27.987023 55.600311) (xy 27.899689 55.512977) (xy 27.796996 55.44436) (xy 27.682889 55.397095)
(xy 27.561754 55.373) (xy 27.438246 55.373) (xy 27.317111 55.397095) (xy 27.203004 55.44436) (xy 27.160141 55.473)
(xy 24.42588 55.473) (xy 24.399999 55.470451) (xy 24.29669 55.480626) (xy 24.19735 55.510761) (xy 24.105798 55.559696)
(xy 24.025552 55.625552) (xy 24.009049 55.645661) (xy 19.015662 60.639049) (xy 18.995553 60.655552) (xy 18.947381 60.71425)
(xy 18.929696 60.735799) (xy 18.880761 60.827351) (xy 18.850626 60.926691) (xy 18.840451 61.03) (xy 18.843001 61.055891)
(xy 18.843 64.226115) (xy 18.840451 64.251996) (xy 18.843 64.277876) (xy 18.850626 64.355305) (xy 18.880761 64.454645)
(xy 18.929696 64.546198) (xy 18.995552 64.626444) (xy 19.015666 64.642951) (xy 20.473001 66.100287) (xy 20.473 75.90047)
(xy 20.466027 75.891973) (xy 20.440192 75.87077) (xy 20.338598 75.769176) (xy 20.26134 75.705772) (xy 20.143729 75.642908)
(xy 20.016114 75.604196) (xy 19.8834 75.591126) (xy 19.750686 75.604196) (xy 19.623071 75.642908) (xy 19.50546 75.705772)
(xy 19.402373 75.790373) (xy 19.317772 75.89346) (xy 19.254908 76.011071) (xy 19.216196 76.138686) (xy 19.203126 76.2714)
(xy 19.216196 76.404114) (xy 19.254908 76.531729) (xy 19.308001 76.63106) (xy 19.308001 76.758977) (xy 19.277187 76.684585)
(xy 19.18121 76.540945) (xy 19.059055 76.41879) (xy 18.915415 76.322813) (xy 18.755811 76.256703) (xy 18.586377 76.223)
(xy 18.413623 76.223) (xy 18.244189 76.256703) (xy 18.084585 76.322813) (xy 17.940945 76.41879) (xy 17.81879 76.540945)
(xy 17.722813 76.684585) (xy 17.656703 76.844189) (xy 17.623 77.013623) (xy 17.127 77.013623) (xy 17.127 69.013623)
(xy 17.623 69.013623) (xy 17.623 69.186377) (xy 17.656703 69.355811) (xy 17.722813 69.515415) (xy 17.81879 69.659055)
(xy 17.940945 69.78121) (xy 18.084585 69.877187) (xy 18.244189 69.943297) (xy 18.413623 69.977) (xy 18.586377 69.977)
(xy 18.755811 69.943297) (xy 18.915415 69.877187) (xy 19.059055 69.78121) (xy 19.18121 69.659055) (xy 19.277187 69.515415)
(xy 19.343297 69.355811) (xy 19.377 69.186377) (xy 19.377 69.013623) (xy 19.343297 68.844189) (xy 19.277187 68.684585)
(xy 19.18121 68.540945) (xy 19.059055 68.41879) (xy 18.915415 68.322813) (xy 18.755811 68.256703) (xy 18.586377 68.223)
(xy 18.413623 68.223) (xy 18.244189 68.256703) (xy 18.084585 68.322813) (xy 17.940945 68.41879) (xy 17.81879 68.540945)
(xy 17.722813 68.684585) (xy 17.656703 68.844189) (xy 17.623 69.013623) (xy 17.127 69.013623) (xy 17.127 59.93556)
(xy 17.664045 59.93556) (xy 17.725932 60.171368) (xy 17.96779 60.284266) (xy 18.227027 60.347811) (xy 18.49368 60.359561)
(xy 18.757501 60.319063) (xy 19.008353 60.227875) (xy 19.114068 60.171368) (xy 19.175955 59.93556) (xy 18.42 59.179605)
(xy 17.664045 59.93556) (xy 17.127 59.93556) (xy 17.127 59.409199) (xy 17.192125 59.588353) (xy 17.248632 59.694068)
(xy 17.48444 59.755955) (xy 18.240395 59) (xy 18.599605 59) (xy 19.35556 59.755955) (xy 19.591368 59.694068)
(xy 19.704266 59.45221) (xy 19.767811 59.192973) (xy 19.779561 58.92632) (xy 19.739063 58.662499) (xy 19.647875 58.411647)
(xy 19.591368 58.305932) (xy 19.35556 58.244045) (xy 18.599605 59) (xy 18.240395 59) (xy 17.48444 58.244045)
(xy 17.248632 58.305932) (xy 17.135734 58.54779) (xy 17.127 58.583421) (xy 17.127 58.06444) (xy 17.664045 58.06444)
(xy 18.42 58.820395) (xy 19.175955 58.06444) (xy 19.114068 57.828632) (xy 18.87221 57.715734) (xy 18.612973 57.652189)
(xy 18.34632 57.640439) (xy 18.082499 57.680937) (xy 17.831647 57.772125) (xy 17.725932 57.828632) (xy 17.664045 58.06444)
(xy 17.127 58.06444) (xy 17.127 55.849604) (xy 19.473 55.849604) (xy 19.473 56.150396) (xy 19.531681 56.44541)
(xy 19.64679 56.723306) (xy 19.813901 56.973406) (xy 20.026594 57.186099) (xy 20.276694 57.35321) (xy 20.55459 57.468319)
(xy 20.849604 57.527) (xy 21.150396 57.527) (xy 21.44541 57.468319) (xy 21.723306 57.35321) (xy 21.973406 57.186099)
(xy 22.186099 56.973406) (xy 22.35321 56.723306) (xy 22.468319 56.44541) (xy 22.527 56.150396) (xy 22.527 55.849604)
(xy 22.468319 55.55459) (xy 22.35321 55.276694) (xy 22.186099 55.026594) (xy 21.973406 54.813901) (xy 21.723306 54.64679)
(xy 21.44541 54.531681) (xy 21.150396 54.473) (xy 20.849604 54.473) (xy 20.55459 54.531681) (xy 20.276694 54.64679)
(xy 20.026594 54.813901) (xy 19.813901 55.026594) (xy 19.64679 55.276694) (xy 19.531681 55.55459) (xy 19.473 55.849604)
(xy 17.127 55.849604) (xy 17.127 51.849604) (xy 19.473 51.849604) (xy 19.473 52.150396) (xy 19.531681 52.44541)
(xy 19.64679 52.723306) (xy 19.813901 52.973406) (xy 20.026594 53.186099) (xy 20.276694 53.35321) (xy 20.55459 53.468319)
(xy 20.849604 53.527) (xy 21.150396 53.527) (xy 21.44541 53.468319) (xy 21.723306 53.35321) (xy 21.973406 53.186099)
(xy 22.186099 52.973406) (xy 22.35321 52.723306) (xy 22.468319 52.44541) (xy 22.527 52.150396) (xy 22.527 51.938246)
(xy 26.373 51.938246) (xy 26.373 52.061754) (xy 26.397095 52.182889) (xy 26.44436 52.296996) (xy 26.512977 52.399689)
(xy 26.600311 52.487023) (xy 26.703004 52.55564) (xy 26.817111 52.602905) (xy 26.938246 52.627) (xy 27.061754 52.627)
(xy 27.182889 52.602905) (xy 27.296996 52.55564) (xy 27.339859 52.527) (xy 44.281711 52.527) (xy 47.387038 55.632328)
(xy 47.397095 55.682889) (xy 47.44436 55.796996) (xy 47.512977 55.899689) (xy 47.600311 55.987023) (xy 47.703004 56.05564)
(xy 47.817111 56.102905) (xy 47.938246 56.127) (xy 48.061754 56.127) (xy 48.182889 56.102905) (xy 48.296996 56.05564)
(xy 48.399689 55.987023) (xy 48.487023 55.899689) (xy 48.55564 55.796996) (xy 48.602905 55.682889) (xy 48.627 55.561754)
(xy 48.627 55.438246) (xy 48.602905 55.317111) (xy 48.55564 55.203004) (xy 48.487023 55.100311) (xy 48.399689 55.012977)
(xy 48.296996 54.94436) (xy 48.182889 54.897095) (xy 48.132328 54.887038) (xy 44.890955 51.645666) (xy 44.874448 51.625552)
(xy 44.794202 51.559696) (xy 44.70265 51.510761) (xy 44.60331 51.480626) (xy 44.525881 51.473) (xy 44.5 51.470451)
(xy 44.474119 51.473) (xy 27.339859 51.473) (xy 27.296996 51.44436) (xy 27.182889 51.397095) (xy 27.061754 51.373)
(xy 26.938246 51.373) (xy 26.817111 51.397095) (xy 26.703004 51.44436) (xy 26.600311 51.512977) (xy 26.512977 51.600311)
(xy 26.44436 51.703004) (xy 26.397095 51.817111) (xy 26.373 51.938246) (xy 22.527 51.938246) (xy 22.527 51.849604)
(xy 22.468319 51.55459) (xy 22.35321 51.276694) (xy 22.186099 51.026594) (xy 21.973406 50.813901) (xy 21.723306 50.64679)
(xy 21.44541 50.531681) (xy 21.150396 50.473) (xy 20.849604 50.473) (xy 20.55459 50.531681) (xy 20.276694 50.64679)
(xy 20.026594 50.813901) (xy 19.813901 51.026594) (xy 19.64679 51.276694) (xy 19.531681 51.55459) (xy 19.473 51.849604)
(xy 17.127 51.849604) (xy 17.127 42.127) (xy 26.761735 42.127)
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
)
)
(filled_polygon
(pts
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 54.053 72.158291) (xy 54.053001 74.501709) (xy 53.655666 74.899045) (xy 53.635552 74.915552) (xy 53.569696 74.995798)
(xy 53.52779 75.074201) (xy 53.520761 75.087351) (xy 53.490626 75.186691) (xy 53.480451 75.29) (xy 53.483 75.315881)
(xy 53.483001 81.736158) (xy 53.414202 81.679696) (xy 53.32265 81.630761) (xy 53.22331 81.600626) (xy 53.145881 81.593)
(xy 53.12 81.590451) (xy 53.094119 81.593) (xy 51.658824 81.593) (xy 51.658824 81.245) (xy 51.651545 81.171095)
(xy 51.629988 81.10003) (xy 51.594981 81.034537) (xy 51.547869 80.977131) (xy 51.490463 80.930019) (xy 51.42497 80.895012)
(xy 51.353905 80.873455) (xy 51.28 80.866176) (xy 50.73 80.866176) (xy 50.656095 80.873455) (xy 50.58503 80.895012)
(xy 50.519537 80.930019) (xy 50.462131 80.977131) (xy 50.415019 81.034537) (xy 50.380012 81.10003) (xy 50.37 81.133036)
(xy 50.359988 81.10003) (xy 50.324981 81.034537) (xy 50.277869 80.977131) (xy 50.220463 80.930019) (xy 50.15497 80.895012)
(xy 50.083905 80.873455) (xy 50.01 80.866176) (xy 49.46 80.866176) (xy 49.386095 80.873455) (xy 49.31503 80.895012)
(xy 49.249537 80.930019) (xy 49.192131 80.977131) (xy 49.145019 81.034537) (xy 49.110012 81.10003) (xy 49.1 81.133036)
(xy 49.089988 81.10003) (xy 49.054981 81.034537) (xy 49.007869 80.977131) (xy 48.992 80.964108) (xy 48.992 78.013289)
(xy 50.089339 76.915951) (xy 50.109448 76.899448) (xy 50.175304 76.819202) (xy 50.224239 76.72765) (xy 50.254374 76.62831)
(xy 50.261482 76.556138) (xy 50.264549 76.525001) (xy 50.262 76.49912) (xy 50.262 75.875892) (xy 50.277869 75.862869)
(xy 50.324981 75.805463) (xy 50.359988 75.73997) (xy 50.37 75.706964) (xy 50.380012 75.73997) (xy 50.415019 75.805463)
(xy 50.462131 75.862869) (xy 50.519537 75.909981) (xy 50.58503 75.944988) (xy 50.656095 75.966545) (xy 50.73 75.973824)
(xy 51.28 75.973824) (xy 51.353905 75.966545) (xy 51.42497 75.944988) (xy 51.490463 75.909981) (xy 51.547869 75.862869)
(xy 51.594981 75.805463) (xy 51.629988 75.73997) (xy 51.651545 75.668905) (xy 51.658824 75.595) (xy 51.658824 74.811465)
(xy 52.806466 73.663824) (xy 53.02375 73.663824) (xy 53.140331 73.652342) (xy 53.252432 73.618336) (xy 53.355744 73.563115)
(xy 53.446299 73.488799) (xy 53.520615 73.398244) (xy 53.575836 73.294932) (xy 53.609842 73.182831) (xy 53.621324 73.06625)
(xy 53.621324 72.55375) (xy 53.609842 72.437169) (xy 53.575836 72.325068) (xy 53.520615 72.221756) (xy 53.446299 72.131201)
(xy 53.355744 72.056885) (xy 53.252432 72.001664) (xy 53.140331 71.967658) (xy 53.02375 71.956176) (xy 52.58625 71.956176)
(xy 52.469669 71.967658) (xy 52.357568 72.001664) (xy 52.254256 72.056885) (xy 52.243557 72.065666) (xy 52.198037 71.980506)
(xy 52.118685 71.883815) (xy 52.021994 71.804463) (xy 51.91168 71.745498) (xy 51.791982 71.709188) (xy 51.6675 71.696928)
(xy 51.51575 71.7) (xy 51.357 71.85875) (xy 51.357 72.683) (xy 51.377 72.683) (xy 51.377 72.937)
(xy 51.357 72.937) (xy 51.357 72.957) (xy 51.103 72.957) (xy 51.103 72.937) (xy 50.31625 72.937)
(xy 50.1575 73.09575) (xy 50.154428 73.285) (xy 50.166688 73.409482) (xy 50.199922 73.519039) (xy 50.15497 73.495012)
(xy 50.083905 73.473455) (xy 50.01 73.466176) (xy 49.46 73.466176) (xy 49.386095 73.473455) (xy 49.31503 73.495012)
(xy 49.249537 73.530019) (xy 49.192131 73.577131) (xy 49.145019 73.634537) (xy 49.110012 73.70003) (xy 49.1 73.733036)
(xy 49.089988 73.70003) (xy 49.054981 73.634537) (xy 49.007869 73.577131) (xy 48.992 73.564108) (xy 48.992 72.803289)
(xy 49.460289 72.335) (xy 50.154428 72.335) (xy 50.1575 72.52425) (xy 50.31625 72.683) (xy 51.103 72.683)
(xy 51.103 71.85875) (xy 50.94425 71.7) (xy 50.7925 71.696928) (xy 50.668018 71.709188) (xy 50.54832 71.745498)
(xy 50.438006 71.804463) (xy 50.341315 71.883815) (xy 50.261963 71.980506) (xy 50.202998 72.09082) (xy 50.166688 72.210518)
(xy 50.154428 72.335) (xy 49.460289 72.335) (xy 50.10829 71.687) (xy 53.581711 71.687)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
)
)
(filled_polygon
(pts
(xy 25.57436 75.556996) (xy 25.642977 75.659689) (xy 25.730311 75.747023) (xy 25.833004 75.81564) (xy 25.947111 75.862905)
(xy 26.068246 75.887) (xy 26.191754 75.887) (xy 26.312889 75.862905) (xy 26.426996 75.81564) (xy 26.473001 75.784901)
(xy 26.473001 76.273) (xy 26.348169 76.273) (xy 26.344514 76.272326) (xy 26.296409 76.273) (xy 26.274119 76.273)
(xy 26.270422 76.273364) (xy 26.266718 76.273416) (xy 26.244639 76.275904) (xy 26.19669 76.280626) (xy 26.193126 76.281707)
(xy 26.192595 76.281767) (xy 26.159216 76.283172) (xy 26.115952 76.293687) (xy 26.072437 76.302979) (xy 26.041758 76.316193)
(xy 26.013217 76.326181) (xy 25.980984 76.334979) (xy 25.941139 76.354861) (xy 25.900782 76.373603) (xy 25.87381 76.393316)
(xy 25.848212 76.4094) (xy 25.818752 76.425147) (xy 25.784346 76.453383) (xy 25.749153 76.48065) (xy 25.727243 76.505871)
(xy 25.705871 76.527243) (xy 25.68065 76.549153) (xy 25.65339 76.584337) (xy 25.625146 76.618752) (xy 25.609396 76.648219)
(xy 25.593316 76.67381) (xy 25.573603 76.700782) (xy 25.554861 76.741139) (xy 25.534979 76.780984) (xy 25.52618 76.81322)
(xy 25.516195 76.841755) (xy 25.502979 76.872437) (xy 25.493685 76.915962) (xy 25.483172 76.959216) (xy 25.481767 76.992597)
(xy 25.478382 77.022643) (xy 25.472326 77.055487) (xy 25.47295 77.1) (xy 25.472326 77.144514) (xy 25.478381 77.177354)
(xy 25.481767 77.207404) (xy 25.483172 77.240783) (xy 25.493683 77.284029) (xy 25.502979 77.327563) (xy 25.516197 77.358249)
(xy 25.52618 77.386779) (xy 25.534979 77.419015) (xy 25.554861 77.45886) (xy 25.573603 77.499217) (xy 25.593316 77.526189)
(xy 25.609396 77.55178) (xy 25.625146 77.581247) (xy 25.65339 77.615662) (xy 25.68065 77.650846) (xy 25.705871 77.672756)
(xy 25.727243 77.694128) (xy 25.732344 77.7) (xy 25.727243 77.705871) (xy 25.705871 77.727243) (xy 25.68065 77.749153)
(xy 25.65339 77.784337) (xy 25.625146 77.818752) (xy 25.609396 77.848219) (xy 25.593316 77.87381) (xy 25.573603 77.900782)
(xy 25.554861 77.941139) (xy 25.534979 77.980984) (xy 25.52618 78.01322) (xy 25.516195 78.041755) (xy 25.502979 78.072437)
(xy 25.493685 78.115962) (xy 25.483172 78.159216) (xy 25.481767 78.192597) (xy 25.478382 78.222643) (xy 25.472326 78.255487)
(xy 25.47295 78.300001) (xy 25.472326 78.344514) (xy 25.478381 78.377354) (xy 25.481767 78.407404) (xy 25.483172 78.440783)
(xy 25.493683 78.484029) (xy 25.502979 78.527563) (xy 25.516197 78.558249) (xy 25.52618 78.586779) (xy 25.534979 78.619015)
(xy 25.554861 78.65886) (xy 25.573603 78.699217) (xy 25.593316 78.726189) (xy 25.609396 78.75178) (xy 25.625146 78.781247)
(xy 25.65339 78.815662) (xy 25.68065 78.850846) (xy 25.705871 78.872756) (xy 25.727243 78.894128) (xy 25.732344 78.9)
(xy 25.727243 78.905871) (xy 25.705871 78.927243) (xy 25.68065 78.949153) (xy 25.65339 78.984337) (xy 25.625146 79.018752)
(xy 25.609396 79.048219) (xy 25.593316 79.07381) (xy 25.573603 79.100782) (xy 25.554861 79.141139) (xy 25.534979 79.180984)
(xy 25.52618 79.21322) (xy 25.516195 79.241755) (xy 25.502979 79.272437) (xy 25.493685 79.315962) (xy 25.483172 79.359216)
(xy 25.481767 79.392597) (xy 25.478382 79.422643) (xy 25.472326 79.455487) (xy 25.47295 79.500001) (xy 25.472326 79.544514)
(xy 25.478381 79.57735) (xy 25.481767 79.607404) (xy 25.483172 79.640783) (xy 25.493683 79.684029) (xy 25.502979 79.727563)
(xy 25.516197 79.758249) (xy 25.52618 79.786779) (xy 25.534979 79.819015) (xy 25.554861 79.85886) (xy 25.573603 79.899217)
(xy 25.593316 79.926189) (xy 25.609396 79.95178) (xy 25.625146 79.981247) (xy 25.65339 80.015662) (xy 25.68065 80.050846)
(xy 25.705871 80.072756) (xy 25.727243 80.094128) (xy 25.732344 80.1) (xy 25.727243 80.105871) (xy 25.705871 80.127243)
(xy 25.68065 80.149153) (xy 25.65339 80.184337) (xy 25.625146 80.218752) (xy 25.609396 80.248219) (xy 25.593316 80.27381)
(xy 25.573603 80.300782) (xy 25.554861 80.341139) (xy 25.534979 80.380984) (xy 25.52618 80.41322) (xy 25.516195 80.441755)
(xy 25.502979 80.472437) (xy 25.493685 80.515962) (xy 25.483172 80.559216) (xy 25.481767 80.592597) (xy 25.478382 80.622643)
(xy 25.472326 80.655487) (xy 25.47295 80.7) (xy 25.472326 80.744514) (xy 25.478381 80.777354) (xy 25.481767 80.807404)
(xy 25.483172 80.840783) (xy 25.493683 80.884029) (xy 25.502979 80.927563) (xy 25.516197 80.958249) (xy 25.52618 80.986779)
(xy 25.534979 81.019015) (xy 25.554861 81.05886) (xy 25.573603 81.099217) (xy 25.593316 81.126189) (xy 25.609396 81.15178)
(xy 25.625146 81.181247) (xy 25.65339 81.215662) (xy 25.68065 81.250846) (xy 25.705871 81.272756) (xy 25.727243 81.294128)
(xy 25.749153 81.319349) (xy 25.784346 81.346616) (xy 25.818752 81.374852) (xy 25.848212 81.390599) (xy 25.87381 81.406683)
(xy 25.900782 81.426396) (xy 25.941139 81.445138) (xy 25.980984 81.46502) (xy 26.013217 81.473818) (xy 26.041746 81.483801)
(xy 26.072429 81.497018) (xy 26.115957 81.506313) (xy 26.159216 81.516827) (xy 26.192593 81.518232) (xy 26.193122 81.518292)
(xy 26.19669 81.519374) (xy 26.244661 81.524099) (xy 26.26671 81.526583) (xy 26.270413 81.526635) (xy 26.274119 81.527)
(xy 26.296418 81.527) (xy 26.344506 81.527675) (xy 26.348167 81.527) (xy 26.473 81.527) (xy 26.473 81.974119)
Make 230V port wider and add eeprom for config
2020-04-14 21:23:59 +02:00
(xy 26.470451 82) (xy 26.480626 82.103309) (xy 26.510761 82.202649) (xy 26.559696 82.294201) (xy 26.564206 82.299696)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(xy 26.625553 82.374448) (xy 26.645662 82.390951) (xy 28.473 84.21829) (xy 28.473 84.594119) (xy 28.470451 84.62)
(xy 28.480626 84.723309) (xy 28.485863 84.740574) (xy 24.426999 80.68171) (xy 24.426999 80.248168) (xy 24.427674 80.244507)
(xy 24.426999 80.196398) (xy 24.426999 80.17412) (xy 24.426634 80.17041) (xy 24.426582 80.166711) (xy 24.424098 80.144662)
(xy 24.419373 80.096691) (xy 24.418291 80.093123) (xy 24.418231 80.092594) (xy 24.416826 80.059217) (xy 24.406312 80.015958)
(xy 24.397017 79.97243) (xy 24.3838 79.941747) (xy 24.373817 79.913218) (xy 24.365019 79.880985) (xy 24.345137 79.84114)
(xy 24.338571 79.827001) (xy 24.551832 79.827001) (xy 24.555493 79.827676) (xy 24.603581 79.827001) (xy 24.62588 79.827001)
(xy 24.629586 79.826636) (xy 24.633288 79.826584) (xy 24.655332 79.8241) (xy 24.703309 79.819375) (xy 24.706877 79.818293)
(xy 24.707406 79.818233) (xy 24.740783 79.816828) (xy 24.78403 79.806316) (xy 24.827569 79.797019) (xy 24.858253 79.783802)
(xy 24.886779 79.77382) (xy 24.919015 79.765021) (xy 24.95886 79.745139) (xy 24.999217 79.726397) (xy 25.026189 79.706684)
(xy 25.05178 79.690604) (xy 25.081247 79.674854) (xy 25.115662 79.64661) (xy 25.150846 79.61935) (xy 25.172756 79.594129)
(xy 25.194128 79.572757) (xy 25.219349 79.550847) (xy 25.246616 79.515654) (xy 25.274852 79.481248) (xy 25.290599 79.451788)
(xy 25.306683 79.42619) (xy 25.326396 79.399218) (xy 25.345138 79.358861) (xy 25.36502 79.319016) (xy 25.373818 79.286783)
(xy 25.383804 79.258247) (xy 25.39702 79.227564) (xy 25.406312 79.184045) (xy 25.416827 79.140784) (xy 25.418232 79.107406)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 25.421618 79.077354) (xy 25.427673 79.044515) (xy 25.427049 79) (xy 25.427673 78.955488) (xy 25.421617 78.922644)
Improve schematic and corresponding layout
2020-02-16 00:10:01 +01:00
(xy 25.418232 78.892596) (xy 25.416827 78.859217) (xy 25.406312 78.815953) (xy 25.39702 78.772438) (xy 25.383806 78.741759)
(xy 25.373818 78.713218) (xy 25.36502 78.680985) (xy 25.345138 78.64114) (xy 25.326396 78.600783) (xy 25.306683 78.573811)
(xy 25.290599 78.548213) (xy 25.274852 78.518753) (xy 25.246616 78.484347) (xy 25.219349 78.449154) (xy 25.194128 78.427244)
(xy 25.172756 78.405872) (xy 25.150846 78.380651) (xy 25.115662 78.353391) (xy 25.081247 78.325147) (xy 25.05178 78.309397)
(xy 25.026189 78.293317) (xy 24.999217 78.273604) (xy 24.95886 78.254862) (xy 24.919015 78.23498) (xy 24.886779 78.226181)
(xy 24.858244 78.216196) (xy 24.840215 78.20843) (xy 24.8501 78.187145) (xy 24.869971 78.147322) (xy 24.878768 78.115094)
(xy 24.885056 78.097124) (xy 24.898272 78.066442) (xy 24.907568 78.022909) (xy 24.918081 77.979652) (xy 24.91916 77.954013)
(xy 24.919373 77.953311) (xy 24.924093 77.905385) (xy 24.926583 77.883289) (xy 24.926635 77.879577) (xy 24.926999 77.875882)
(xy 24.926999 77.853625) (xy 24.927674 77.805493) (xy 24.926999 77.801832) (xy 24.926999 77.798171) (xy 24.927674 77.79451)
(xy 24.926999 77.746378) (xy 24.926999 77.724121) (xy 24.926635 77.720426) (xy 24.926583 77.716715) (xy 24.924094 77.694623)
(xy 24.919373 77.646692) (xy 24.91916 77.64599) (xy 24.918081 77.620349) (xy 24.907566 77.577085) (xy 24.898272 77.53356)
(xy 24.885058 77.502883) (xy 24.878768 77.484907) (xy 24.869971 77.452679) (xy 24.8501 77.412856) (xy 24.831351 77.372484)
(xy 24.81164 77.345514) (xy 24.801508 77.329389) (xy 24.785761 77.299927) (xy 24.757515 77.265509) (xy 24.730257 77.230328)
(xy 24.70504 77.208421) (xy 24.69158 77.194961) (xy 24.669672 77.169743) (xy 24.634478 77.142475) (xy 24.600073 77.114239)
(xy 24.570609 77.09849) (xy 24.554486 77.08836) (xy 24.527516 77.068649) (xy 24.487144 77.0499) (xy 24.447321 77.030029)
(xy 24.415093 77.021232) (xy 24.397117 77.014942) (xy 24.36644 77.001728) (xy 24.328947 76.993722) (xy 24.345137 76.958861)
(xy 24.365019 76.919016) (xy 24.373817 76.886783) (xy 24.383802 76.85825) (xy 24.397017 76.827571) (xy 24.406313 76.784039)
(xy 24.416826 76.740784) (xy 24.418231 76.70741) (xy 24.418291 76.706879) (xy 24.419373 76.703311) (xy 24.424097 76.655347)
(xy 24.426582 76.633292) (xy 24.426634 76.629588) (xy 24.426999 76.625882) (xy 24.426999 76.603584) (xy 24.427674 76.555496)
(xy 24.426999 76.551835) (xy 24.426999 75.818291) (xy 24.71829 75.527) (xy 25.561935 75.527)
)
)
Prepare for v1.2 * Remove voltage buffer Opamp after TL431PK because it may oscillate * Replace TL431PK with TL431LI. Stabilized by very large capacitance (> 10uF) * Add panic passives to differential amplifier in order to avoid oscillaton. Values as they are now should work. * Remove external ADC. Tests with version v1.1 show that the precision of the STM's ADC is sufficient, (once all oscillations are damped by modifying the circuit) * Power whole OpAmp circuit with 3.3 volts in order to eliminate the need for the clamping diode at the ADC pin. This diode showed a high reverse current over temperature, which affected the measurement.
2020-02-05 18:30:34 +01:00
)
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(zone (net 2) (net_name GND) (layer B.Cu) (tstamp 0) (hatch edge 0.508)
(priority 1)
Add git url
2020-02-18 20:51:03 +01:00
(connect_pads (clearance 0.25))
(min_thickness 0.254)
(fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508))
(polygon
(pts
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 45 36.5) (xy 17 36.5) (xy 17 25) (xy 34.5 25) (xy 39.5 20.5)
(xy 45 20.5)
Add git url
2020-02-18 20:51:03 +01:00
)
)
(filled_polygon
(pts
Replace transformer with off the shelf power brick, add eeprom for config
2020-05-17 00:16:05 +02:00
(xy 44.873 36.373) (xy 24.130318 36.373) (xy 24.087973 36.293779) (xy 23.915896 36.084103) (xy 23.70622 35.912027)
(xy 23.467004 35.784163) (xy 23.207438 35.705425) (xy 22.9375 35.678838) (xy 22.667561 35.705425) (xy 22.407995 35.784163)
(xy 22.168779 35.912027) (xy 21.959103 36.084104) (xy 21.787027 36.29378) (xy 21.744683 36.373) (xy 17.127 36.373)
(xy 17.127 30.815132) (xy 40.373 30.815132) (xy 40.373 31.184868) (xy 40.445132 31.547501) (xy 40.586624 31.889093)
(xy 40.792039 32.196518) (xy 41.053482 32.457961) (xy 41.360907 32.663376) (xy 41.702499 32.804868) (xy 42.065132 32.877)
(xy 42.434868 32.877) (xy 42.797501 32.804868) (xy 43.139093 32.663376) (xy 43.446518 32.457961) (xy 43.707961 32.196518)
(xy 43.913376 31.889093) (xy 44.054868 31.547501) (xy 44.127 31.184868) (xy 44.127 30.815132) (xy 44.054868 30.452499)
(xy 43.913376 30.110907) (xy 43.707961 29.803482) (xy 43.446518 29.542039) (xy 43.139093 29.336624) (xy 42.797501 29.195132)
(xy 42.434868 29.123) (xy 42.065132 29.123) (xy 41.702499 29.195132) (xy 41.360907 29.336624) (xy 41.053482 29.542039)
(xy 40.792039 29.803482) (xy 40.586624 30.110907) (xy 40.445132 30.452499) (xy 40.373 30.815132) (xy 17.127 30.815132)
(xy 17.127 25.127) (xy 34.5 25.127) (xy 34.524776 25.12456) (xy 34.548601 25.117333) (xy 34.570557 25.105597)
(xy 34.584959 25.094398) (xy 35.254675 24.491653) (xy 40.937952 24.491653) (xy 41.093962 24.807214) (xy 41.468745 24.99802)
(xy 41.873551 25.112044) (xy 42.292824 25.144902) (xy 42.710451 25.095334) (xy 43.110383 24.965243) (xy 43.406038 24.807214)
(xy 43.562048 24.491653) (xy 42.25 23.179605) (xy 40.937952 24.491653) (xy 35.254675 24.491653) (xy 36.864485 23.042824)
(xy 40.105098 23.042824) (xy 40.154666 23.460451) (xy 40.284757 23.860383) (xy 40.442786 24.156038) (xy 40.758347 24.312048)
(xy 42.070395 23) (xy 42.429605 23) (xy 43.741653 24.312048) (xy 44.057214 24.156038) (xy 44.24802 23.781255)
(xy 44.362044 23.376449) (xy 44.394902 22.957176) (xy 44.345334 22.539549) (xy 44.215243 22.139617) (xy 44.057214 21.843962)
(xy 43.741653 21.687952) (xy 42.429605 23) (xy 42.070395 23) (xy 40.758347 21.687952) (xy 40.442786 21.843962)
(xy 40.25198 22.218745) (xy 40.137956 22.623551) (xy 40.105098 23.042824) (xy 36.864485 23.042824) (xy 38.56946 21.508347)
(xy 40.937952 21.508347) (xy 42.25 22.820395) (xy 43.562048 21.508347) (xy 43.406038 21.192786) (xy 43.031255 21.00198)
(xy 42.626449 20.887956) (xy 42.207176 20.855098) (xy 41.789549 20.904666) (xy 41.389617 21.034757) (xy 41.093962 21.192786)
(xy 40.937952 21.508347) (xy 38.56946 21.508347) (xy 39.548735 20.627) (xy 44.873 20.627)
Add git url
2020-02-18 20:51:03 +01:00
)
)
)
Fisrt draft. Will be reworked
2019-09-22 18:42:43 +02:00
)
Reference in New Issue Copy Permalink